BSEP 14-0033, Cycle 20 Core Operating Limits Report (COLR)

Cycle 20 Core Operating Limits Report (COLR)

ML14106A371
Person / Time
Site:	Brunswick
Issue date:	04/04/2014
From:	Pope A H Duke Energy Progress
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
BSEP 14-0033
Download: ML14106A371 (42)

Text

DUKE ENERGY.April 4, 2014 Serial: BSEP 14-0033 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 Brunswick Nuclear Plant P.O. Box 10429 Southport, NC 28461

Subject:

Brunswick Steam Electric Plant, Unit No. 1 Renewed Facility Operating License No. DPR-71 Docket No. 50-325 Unit 1 Cycle 20 Core Operating Limits Report (COLR)

Reference:

Letter from Annette H. Pope (CP&L) to NRC Document Control Desk, Unit 1 Cycle 19 Core Operating Limits Report, Thermal-Hydraulic Design Report, and Reload Safety Analysis Report, dated March 30, 2012, ADAMS Accession No. 12100A085 Ladies and Gentlemen:

Enclosed is a copy of the Core Operating Limits Report (COLR) for Brunswick Steam Electric Plant (BSEP), Unit 1 Cycle 20 operation.

Duke Energy Progress, Inc., is providing the enclosed COLR in accordance with Brunswick Unit 1 Technical Specification 5.6.5.d. The enclosed COLR supersedes the report previously submitted by Reference 1.No regulatory commitments are contained in this letter. Please refer any questions regarding this submittal to Mr. Lee Grzeck, Manager -Regulatory Affairs, at (910) 457-2487.Sincerely, Aqnne e .Ppe Director -Organizational Effectiveness Brunswick Steam Electric Plant

Enclosure:

Brunswick Unit 1, Cycle 20 Core Operating Limits Report, March 2014 Aw(

U.S. Nuclear Regulatory Commission Page 2 of 2 cc (with enclosure):

U. S. Nuclear Regulatory Commission, Region II ATTN: Mr. Victor M. McCree, Regional Administrator 245 Peachtree Center Ave, NE, Suite 1200 Atlanta, GA 30303-1257 U. S. Nuclear Regulatory Commission ATTN: Mr. Siva P. Lingam (Mail Stop OWFN 8G9A) (Electronic Copy Only)11555 Rockville Pike Rockville, MD 20852-2738 U. S. Nuclear Regulatory Commission ATTN: Ms. Michelle P. Catts, NRC Senior Resident Inspector 8470 River Road Southport, NC 28461-8869 Chair -North Carolina Utilities Commission P.O. Box 29510 Raleigh, NC 27626-0510 BSEP 14-0033 Enclosure Brunswick Unit 1, Cycle 20 Core Operating Limits Report, March 2014 Duke Energy, Nudlw Fuels Enginmdng Nuclaw Fuel Design BIC20 Core Operating Limits RepWt Design Cab. No. 1B21-2010 Pop 1. Revision 0 BRUNSWICK UNIT 1, CYCLE 20 CORE OPERATING LIMITS REPORT March 2014ý ,ý m : L bL. ,-Prepred By: Petwr L Noel BWR Fuel Enginmern F 9 3/2 -2f 201 4 Verirfid By: Appryovd Or.CharleeW.

stnmou a BWR Fuel Engineedfng R" R F LO g' KWngu ýI Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design BIC20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 2, Revision 0 LIST OF EFFECTIVE PAGES Paae(s)1-39 Revision 0 This document consists of 39 total pages.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 3, Revision 0 TABLE OF CONTENTS Subiect Page C o v e r ..................................................................................................................................................

1 List of Effective Pages ........................................................................................................................

2 Table of Contents ...............................................................................................................................

3 List of Tables ......................................................................................................................................

4 List of Figures .....................................................................................................................................

5 Nomenclature

.....................................................................................................................................

6 Introduction and Summary ..........................................................................................................

8 APLHGR Limits ...................................................................................................................................

9 MCPR Limits .......................................................................................................................................

9 LHGR Limits .....................................................................................................................................

10 PBDA Setpoints

................................................................................................................................

10 RBM Setpoints

..................................................................................................................................

11 Equipment Out-of-Service

................................................................................................................

11 Single Loop Operation

......................................................................................................................

12 Inoperable Main Turbine Bypass System ......................................................................................

12 Feedwater Tem perature Reduction

.............................................................................................

12 References

.......................................................................................................................................

14 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 4, Revision 0 CAUTION References to COLR Figures or Tables should be made using titles only; Figure and Table numbers I may change from cycle to cycle.LIST OF TABLES Table Title Page Table 1: R BM System Setpoints

...............................................................................................

16 Table 2: RBM Operability Requirem ents ..................................................................................

17 Table 3: P B DA S etpoints .........................................................................................................

18 Table 4: Exposure Basis for Brunswick Unit 1 Cycle 20 Transient Analysis .............................

19 Table 5: Power-Dependent MCPRP Limits ...............................................................................

20 NSS Insertion Times -BOC to < NEOC Table 6: Power-Dependent MCPRp Limits ...............................................................................

21 TSSS Insertion Times -BOC to < NEOC Table 7: Power-Dependent MCPRp Limits ...............................................................................

22 NSS Insertion Times -BOC to < EOCLB Table 8: Power-Dependent MCPRp Limits ...............................................................................

23 TSSS Insertion Times -BOC to < EOCLB Table 9: Power-Dependent MCPRp Limits ...............................................................................

24 NSS Insertion Times -BOC to < MCE (FFTR/Coastdown)

Table 10: Power-Dependent MCPRP Limits ...............................................................................

25 TSSS Insertion Times -BOC to < MCE (FFTR/Coastdown)

Table 11: Flow-Dependent M CPRf Lim its ...................................................................................

26 Table 12: AREVA Fuel Steady-State LHGRss Limits .................................................................

27 Table 13: AREVA Fuel Power-Dependent LHGRFACp Multipliers

.............................................

28 NSS Insertion Times -BOC to < EOCLB Table 14: AREVA Fuel Power-Dependent LHGRFACp Multipliers

...........................................

29 TSSS Insertion Times -BOC to < EOCLB Table 15: AREVA Fuel Power-Dependent LHGRFACp Multipliers

...........................................

30 NSS Insertion Times -BOC to < MCE (FFTR/Coastdown)

Table 16: AREVA Fuel Power-Dependent LHGRFACp Multipliers

...........................................

31 TSSS Insertion Times -BOC to < MCE (FFTR/Coastdown)

Table 17: AREVA Fuel Flow-Dependent LHGRFACf Multipliers

.................................................

32 Table 18: AREVA Fuel Steady-State MAPLHGRss Limits ..........................................................

33 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 5, Revision 0 LIST OF FIGURES Figure Title or Description Paae Figure 1: Stability O ption III Power/Flow M ap ............................................................................

34 OPRM Operable, Two Loop Operation, 2923 MWt Figure 2: Stability Option III Power/Flow Map ............................................................................

35 OPRM Inoperable, Two Loop Operation, 2923 MWt Figure 3: Stability Option III Power/Flow Map ............................................................................

36 OPRM Operable, Single Loop Operation, 2923 MWt Figure 4: Stability Option III Power/Flow M ap ............................................................................

37 OPRM Inoperable, Single Loop Operation, 2923 MWt Figure 5: Stability Option III Power/Flow M ap ............................................................................

38 OPRM Operable, FWTR, 2923 MWt Figure 6: Stability Option III Power/Flow M ap ............................................................................

39 OPRM Inoperable, FWTR, 2923 MWVt Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 6, Revision 0 APLHGR APRM ARTS BOC BSP BWROG CAVEX COLR CRWE DIVOM EFPD EOC EOCLB EOFP EOOS F FHOOS FFTR FWTR GE HCOM HPSP HTSP ICF IPSP ITSP NOMENCLATURE Average Planar Linear Heat Generation Rate Average Power Range Monitor (Subsystem)

APRM/RBM Technical Specification Beginning of Cycle Backup Stability Protection BWR Owners Group Core Average Exposure Core Operating Limits Report Control Rod Withdrawal Error Delta CPR Over Initial MCPR Versus Oscillation Magnitude Effective Full Power Day End of Cycle End of Cycle Licensing Basis End of Full Power Equipment Out of Service Flow (Total Core)Feedwater Heater Out of Service Final Feedwater Temperature Reduction Feedwater Temperature Reduction General Electric Hot Channel Oscillation Magnitude High Power Set Point High Trip Set Point Increased Core Flow Intermediate Power Set Point Intermediate Trip Set Point LCO LHGR LHGRss LHGRFAC LHGRFACf LHGRFACP LPRM LPSP LTSP MAPLHGR MAPLHGRss MAPFAC MAPFACf MAPFACp MAPFACSLO Limiting Condition of Operation Linear Heat Generation Rate Steady-State Maximum Linear Heat Generation Rate Linear Heat Generation Rate Factor Flow-Dependent Linear Heat Generation Rate Factor Power-Dependent Linear Heat Generation Rate Factor Local Power Range Monitor (Subsystem)

Low Power Set Point Low Trip Set Point Maximum Average Planar Linear Heat Generation Rate Steady-State Maximum Average Planar Linear Heat Generation Rate Maximum Average Planar Linear Heat Generation Rate Factor Flow-Dependent Maximum Average Planar Linear Heat Generation Rate Factor Power-Dependent Maximum Average Planar Linear Heat Generation Rate Factor Maximum Average Planar Linear Heat Generation Rate Factor when in SLO Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design CaIc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 7, Revision 0 NOMENCLATURE (continued)

MCE Maximum Core Exposure MCPR Minimum Critical Power Ratio MCPRf Flow-Dependent Minimum Critical Power Ratio MCPRp Power-Dependent Minimum Critical Power Ratio MELLL Maximum Extended Load Line Limit MEOD Maximum Extended Operating Domain MSIVOOS Main Steam Isolation Valve Out of Service NEOC Near End of Cycle NFWT Nominal Feedwater Temperature NRC Nuclear Regulatory Commission NSS Nominal SCRAM Speed OLMCPR Operating Limit Minimum Critical Power Ratio OPRM Oscillation Power Range Monitor OOS Out of Service P Power (Total Core Thermal)PBDA Period Based Detection Algorithm PRNM Power Range Neutron Monitoring (System)RBM Rod Block Monitor (Subsystem)

RFWT Reduced Feedwater Temperature RPT Recirculation Pump Trip RTP Rated Thermal Power SLMCPR Safety Limit Minimum Critical Power Ratio SLO Single Loop Operation SRV Safety Relief Valve SRVOOS Safety Relief Valve Out of Service STP Simulated Thermal Power TBV Turbine Bypass Valve TBVINS Turbine Bypass Valves In Service TBVOOS Turbine Bypass Valves Out of Service (all bypass valves OOS)TIP Traversing Incore Probe TLO Two Loop Operation TS Technical Specification TSSS Technical Specification SCRAM Speed Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design CaIc. No. 1B21-2010 Page 8, Revision 0 CAUTION References to COLR Figures or Tables should be made using titles only; Figure and Table numbers may change from cycle to cycle.I Introduction and Summary The Brunswick Unit 1, Cycle 20 COLR provides values for the core operation limits and setpoints required by Technical Specifications (TS) 5.6.5.a.

NRC Operating Limit Approved Related TS Items* Methodology JVS 5..6.5.a) (S565b 1. APLHGRforTS3.2.1.

1, 2,6,7,16, -TS 3.2.1 LCO (APLHGR)17 -TS 3.4.1 LCO (Recirculation loops operating)

-TS 3.7.6 LCO (Main Turbine Bypass out of service)2. MCPR for TS 3.2.2. 1, 2, 6, 7, 8, 9, -TS 3.2.2 LCO (MCPR)10, 11, 12, 13, _ TS 3.4.1 LCO (Recirculation loops 14, 21 operating)

-TS 3.7.6 LCO (Main Turbine bypass out of service)3. LHGR for TS 3.2.3. 2, 3, 4, 5, 6, 7, -TS 3.2.3 LCO (LHGR)8, 9,10,12, -TS 3.4.1 LCO (Recirculation loops 13, 20 operating)

-TS 3.7.6 LCO (Main Turbine bypass out of service)4. PBDA setpoint for 8,14, 18, 19, -TS Table 3.3.1.1-1, Function 2.f Function 2.f, APRM -OPRM 21 (APRM -OPRM Upscale)Upscale, for TS 3.3. 1. 1. -TS 3.3.1.1, Condition I (Alternate instability detection and suppression)

5. The Allowable Values and 6, 8 -TS Table 3.3.2.1-1, Function 1 (RBM power range setpoints for Rod upscale and operability requirements)

Block Monitor Upscale Functions for TS 3.3.2.1.The required core operating limits and setpoints listed in TS 5.6.5.a are presented in the COLR, have been determined using NRC approved methodologies (COLR References 1 through 21) in accordance with TS 5.6.5.b, have considered all fuel types utilized in B1C20, and are established such that all applicable limits of the plant safety analysis are met in accordance with TS 5.6.5.c.In addition to the TS required core operating limits and setpoints, this COLR also includes maps showing the allowable power/flow operating range including the Option III stability ranges.The generation of this COLR is documented in Reference 30 and is based on analysis results documented in References 27-29.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 9, Revision 0 APLHGR Limits Steady-state MAPLHGRss limits are provided for AREVA Fuel (Table 18). These steady-state MAPLHGRss limits must be modified as follows:* AREVA Fuel MAPLHGR limits do not have a power, flow, or EOOS dependency.

Power-dependent MAPFACp multipliers and flow-dependent MAPFACf multipliers with a constant value of 1.0 under all conditions have been assigned to AREVA Fuel.* The applied MAPLHGR limit is dependent on the number of recirculation loops in operation.

The steady-state MAPLHGR limit must be modified by a MAPFACSLO multiplier when in SLO.MAPFACSLO has a fuel design dependency as shown below.The applied TLO and SLO MAPLHGR limits are determined as follows: MAPLHGR LimitTLo = MAPLHGRss x (MAPFACp, MAPFACf, 1.0)min MAPLHGR LimitsLo = MAPLHGRss x (MAPFACp, MAPFACf, MAPFACSLO)min where MAPFACSLO

= 0.85 for ATRIUM-10 fuel= 0.80 for ATRIUM 10XM fuel Linear interpolation should be used to determine intermediate values between the values listed in the table.MCPR Limits The MCPR limits presented in Tables 5 through 11 are based on the TLO and SLO SLMCPRs listed in Technical Specification 2.1.1.2 of 1.08 and 1.11, respectively.

• MCPR limits have a core power and core flow dependency.

Power-dependent MCPRp limits are presented in Tables 5 through 10 while flow-dependent MCPRf limits are presented in Table 11.* Power-dependent MCPRp limits are dependent on CAVEX, SCRAM insertion speed, EOOS, fuel design, number of operating recirculation loops (i.e., TLO or SLO), core flow and core thermal power. Values for the CAVEX breakpoints are provided in Table 4. See COLR section titled "Equipment Out-of-Service" for a list of analyzed EOOS conditions.

Care should be used when selecting the appropriate limits set." The MCPR limits are established such that they bound all pressurization and non-pressurization events." The power-dependent MCPRp limits (Tables 5-10) must be adjusted by an adder of 0.03 when in SLO.The applied TLO and SLO MCPR limits are determined as follows: MCPR LimitTLO = (MCPRp, MCPRf)mx MCPR LimitSLO = (MCPRp + 0.03, MCPRf)max Linear interpolation should be used to determine intermediate values between the values listed in the tables. Some of the limits tables show two breakpoints at 26.0%P and 50.0%P. IF performing a hand calculation of a limit AND the power is exactly on the breakpoint (i.e. 26.0 or 50.2), THEN select the most restrictive limit associated with the breakpoint.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1 B21-2010 B1C20 Core Operating Limits Report Page 10, Revision 0 LHGR Limits Steady-state LHGRss limits are provided for AREVA Fuel (Table 12). These steady-state LHGRss limits must be modified as follows: " AREVA Fuel LHGR limits have a core power and core flow dependency.

AREVA Fuel power-dependent LHGRFACp multipliers (Tables 13-16) and flow-dependent LHGRFACf multipliers (Table 17) must be used to modify the steady-state LHGRss limits (Table 12) for off-rated conditions.

• AREVA Fuel power-dependent LHGRFACp multipliers are dependent on CAVEX, SCRAM insertion speed, EOOS, fuel design, core flow and core thermal power. Values for the CAVEX breakpoints are provided in Table 4. See COLR section titled "Equipment Out-of-Service" for a list of analyzed EOOS conditions.

Care should be used when selecting the appropriate multiplier set." The applied LHGR limit is not dependent on the number of operating recirculation loops. No adjustment to the LHGR limit is necessary for SLO.The applied LHGR limit is determined as follows: LHGR Limit = LHGRss x (LHGRFACp, LHGRFACf)mi, Linear interpolation should be used to determine intermediate values between the values listed in the tables. Some of the limits tables show two breakpoints at 26.0%P and 50.0%P. IF performing a hand calculation of a limit AND the power is exactly on the breakpoint (i.e. 26.0 or 50.0), THEN select the most restrictive limit associated with the breakpoint.

PBDA Setpoints Brunswick Unit 1 has implemented BWROG Long Term Stability Solution Option III (OPRM) with the methodology described in Reference

23. Plant specific analysis incorporating the Option III hardware is described in Reference

24. Reload validation has been performed in accordance with Reference 19.The analysis was performed at 1 00%P assuming a two pump trip (2PT) and at 45%F assuming steady-state (SS) conditions at the highest rod line power (60.5%). The PBDA setpoints are set such that either the least limiting MCPRp limit or the least limiting MCPRf limit will provide adequate protection against violation of the SLMCPR during a postulated reactor instability.

Based on the MCPR limits presented in Tables 5 through 11, the required Amplitude Trip Setpoint (1.11) is set by the least limiting 1 00%P MCPRp limit (1.35) with an allowance for conservative margin, which has an associated Confirmation Count Setpoint (14). The PBDA setpoints shown in Table 3 are valid for any feedwater temperature.

Evaluations by GE have shown that the generic DIVOM curves specified in Reference 19 may not be conservative for current plant operating conditions for plants which have implemented Stability Option Ill. To address this issue, AREVA has performed calculations for the relative change in CPR as a function of the calculated HCOM. These calculations were performed with the RAMONA5-FA code in accordance with Reference

26. This code is a coupled neutronic-thermal-hydraulic three-dimensional transient model for the purpose of determining the relationship between the relative change in ACPR and the HCOM on a plant specific basis. The stability-based OLMCPRs are based upon using the most limiting ACPR calculated for a given oscillation magnitude or the generic value provided in Reference 19.In cases where the OPRM system is declared inoperable, Backup Stability Protection (BSP) in accordance with Reference 25 is provided.

Analyses have been performed to support operation with nominal feedwater temperature conditions and reduced feedwater temperature conditions (FHOOS and FFTR).

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design CaIc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 11, Revision 0 The power/flow maps (Figures 1-6) were developed based on Reference 29 to facilitate operation under Stability Option III as implemented by Function 2.f of Table 3.3.1.1-1 and LCO Condition I of Technical Specification 3.3.1.1. The generation of these maps is documented in Reference

28. All maps illustrate the region of the power/flow map above 25% RTP and below 60% drive flow (correlated to core flow) where the system is required to be enabled. Figures 5 and 6 are the power/flow maps for use in FWTR.The maps supporting an operable OPRM (Figures 1, 3 and 5) show a Scram Avoidance Region, which is not a licensing requirement but is an operator aid to illustrate where the OPRM system may generate a scram to avoid an instability event. Note that the STP scram and rod block limits are defined in Technical Specifications, the Technical Requirements Manual, and Plant procedures, and are included in the COLR as an operator aid rather than a licensing requirement.

Figures 3 and 4 implement the corrective action for AR-217345 which restricts reactor power to no more than 50% RTP when in SLO with OPRM operable or inoperable.

This operator aid is intended to mitigate a spurious OPRM trip signal which could result from APRM noise while operating at high power levels.RBM Setpoints The nominal trip setpoints and allowable values of the control rod withdrawal block instrumentation are presented in Table 1 and were determined to be consistent with the bases of the ARTS program (Reference 22). These setpoints will ensure the power-dependent MCPR limits will provide adequate protection against violation of the SLMCPR during a postulated CRWE event. Reference 27 revised these setpoints to reflect changes associated with the installation of the NUMAC PRNM system. RBM operability requirements, consistent with Notes (a) through (e) of Technical Specification Table 3.3.2.1-1, are provided in Table 2.Equipment Out-of-Service Brunswick Unit 1, Cycle 20 is analyzed for the following operating conditions with applicable MCPR, APLHGR and LHGR limits." Base Case Operation* SLO* TBVOOS* FHOOS" Combined TBVOOS and FHOOS Base Case Operation as well as the above-listed EOOS conditions assume all the items OOS below.These conditions are general analysis assumptions used to ensure conservative analysis results and were not meant to define specific EOOS conditions beyond those already defined in Technical Specifications.

0 Any 1 inoperable SRV* 1 inoperable TBV (Note that for TBVOOS and TBVOOS/FHOOS all 4 TBVs are assumed inoperable)

• Up to 40% of the TIP channels OOS* Up to 50% of the LPRMs OOS Please note that during FFTR/Coastdown, FHOOS is included in Base Case Operation and TBVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 12, Revision 0 Single Loop Operation Brunswick Unit 1, Cycle 20 may operate in SLO up to a maximum core flow of 45 Mlbm/hr which corresponds to a maximum power level of 71.1% RTP with applicable MCPR, APLHGR and LHGR limits. The following must be considered when operating in SLO:* SLO is not permitted with FHOOS." SLO is not permitted with TBVOOS.* SLO is not permitted with MSIVOOS.Various indicators on the Power/Flow Maps are provided not as operating limits but rather as a convenience for the operators.

The purposes for some of these indicators are as follows:* The SLO Entry Rod Line is shown on the TLO maps to avoid regions of instability in the event of a pump trip." A maximum core flow line is shown on the SLO maps to avoid vibration problems.* APRM STP Scram and Rod Block nominal trip setpoint limits are shown at the estimated core flow corresponding to the actual drive flow-based setpoints to indicate where the Operator may encounter these setpoints (See LCO 3.3.1.1, Reactor Protection System Instrumentation Function 2.b: Average Power Range Monitors Simulated Thermal Power -High Allowable Value)." When in SLO, Figures 3 and 4 implement the corrective action for AR-217345 which restricts reactor power to no more than 50% RTP with OPRM operable or inoperable.

This operator aid is intended to mitigate a spurious OPRM trip signal which could result from APRM noise while operating at high power levels.Inoperable Main Turbine Bypass System Brunswick Unit 1, Cycle 20 may operate with an inoperable Main Turbine Bypass System over the entire MEOD range and cycle with applicable APLHGR, MCPR and LHGR limits as specified in the COLR. An operable Main Turbine Bypass System with only one inoperable bypass valve was assumed in the development of the Base Case Operation limits. Base Case Operation is synonymous with TBVINS. The following must be considered when operating with TBVOOS: " Two or more inoperable bypass valves renders the entire Main Turbine Bypass System inoperable requiring the use of TBVOOS limits. The TBVOOS analysis supports operation with all bypass valves inoperable." Prior to reaching the EOCLB exposure breakpoint, operation with FWTR >10*F and reactor power > 50% RTP requires use of the TBVOOS/FHOOS limits. At or below 50% RTP, TBVOOS limits bound FHOOS limits." TBVOOS operation coincident with FHOOS is supported using the combined TBVOOS/FHOOS limits." SLO is not permitted with TBVOOS.Feedwater Temperature Reduction Brunswick Unit 1, Cycle 20 may operate with RFWT over the entire MEOD range and cycle with applicable APLHGR, MCPR and LHGR limits as specified in the COLR. NFWT is defined as the range of feedwater temperatures from NFWT to NFWT -10°F. NFWT and its allowable variation were assumed in the development of the Base Case Operation limits. The FHOOS limits and FFTR/Coastdown limits were developed for a maximum feedwater temperature reduction of 110.3*F.The following must be considered when operating with RFWT:* Although the acronyms FWTI'R, FHOOS, RFWT and FFTR all involve reduced feedwater temperature, the use of FFTR is reserved for cycle energy extension using reduced feedwater Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 13, Revision 0 temperature at and beyond a core average exposure of EOCLB using FFTR/Coastdown limits." Prior to reaching the EOCLB exposure breakpoint, operation with FWTR >10°F and reactor power > 50% RTP requires use of the FHOOS limits. At or below 50% RTP, Base Case Operation limits bound FHOOS limits." Until a core average exposure of EOCLB is reached, implementation of the FFTR/Coastdown limits is not required even if coastdown begins early.* When operating with RFWT, the appropriate Stability Option III Power/Flow Maps (Figures 5 and 6) must be used." FHOOS operation coincident with TBVOOS is supported using the combined TBVOOS/FHOOS limits." SLO is not permitted with RFWT.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design Calc. No. 1B21-2010 BIC20 Core Operating Limits Report Page 14, Revision 0 References In accordance with Brunswick Unit 1 Technical Specification 5.6.5.b, the analytical methods for determining Brunswick Unit 1 core operating limits have been specifically reviewed and approved by the NRC and are listed as References 1 through 21.1. NEDE-2401 1-P-A, "GESTAR II -General Electric Standard Application for Reactor Fuel", and US Supplement, Revision 15, September 2005.2. XN-NF-81-58(P)(A) and Supplements 1 and 2, "RODEX2 Fuel Rod Thermal-Mechanical Response Evaluation Model," Revision 2, March 1984.3. XN-NF-85-67(P)(A), "Generic Mechanical Design for Exxon Nuclear Jet Pump BWR Reload Fuel," Revision 1, September 1986.4. EMF-85-74(P)

Supplement I(P)(A) and Supplement 2(P)(A), "RODEX2A (BWR) Fuel Rod Thermal-Mechanical Evaluation Model," Revision 0, February 1998.5. ANF-89-98(P)(A), "Generic Mechanical Design Criteria for BWR Fuel Designs," Revision 1, May 1995.6. XN-NF-80-19(P)(A)

Volume 1 and Volume 1 Supplement I and 2, "Exxon Nuclear Methodology for Boiling Water Reactors -Neutronic Methods for Design and Analysis," March 1983.7. XN-NF-80-19(P)(A)

Volume 4, "Exxon Nuclear Methodology for Boiling Water Reactors: Application of the ENC Methodology to BWR Reloads," Revision 1, June 1986.8. EMF-2158(P)(A), "Siemens Power Corporation Methodology for Boiling Water Reactors: Evaluation and Validation of CASMO-4/MICROBURN-B2," Revision 0, October 1999.9. XN-NF-80-19(P)(A)

Volume 3, "Exxon Nuclear Methodology for Boiling Water Reactors, THERMEX: Thermal Limits Methodology Summary Description," Revision 2, January 1987.10. XN-NF-84-105(P)(A)

Volume 1 and Volume I Supplements 1 and 2, "XCOBRA-T:

A Computer Code for BWR Transient Thermal-Hydraulic Core Analysis," February 1987.11. ANP-10307PA "AREVA MCPR Safety Limit Methodology for Boiling Water Reactors," Revision 0, June 2011.12. ANF-913(P)(A)

Volume 1 and Volume 1 Supplements 2, 3, 4, "COTRANSA2:

A Computer Program for Boiling Water Reactor Transient Analyses," Revision 1, August 1990.13. ANF-1358(P)(A), "The Loss of Feedwater Heating Transient in Boiling Water Reactors," Revision 3, September 2005.14. EMF-2209(P)(A), "SPCB Critical Power Correlation", Revision 3, September 2009.15. EMF-2245(P)(A), "Application of Siemens Power Corporation's Critical Power Correlations to Co-Resident Fuel," Revision 0, August 2000.16. EMF-2361(P)(A), "EXEM BWR-2000 ECCS Evaluation Model," Revision 0, May 2001.17. EMF-2292(P)(A), "ATRIUMTM-10:

Appendix K Spray Heat Transfer Coefficients," Revision 0, September 2000.18. EMF-CC-074(P)(A)

Volume 4, "BWR Stability Analysis -Assessment of STAIF with Input from MICROBURN-B2," Revision 0, August 2000.19. NEDO-32465-A, "Reactor Stability Detect and Suppress Solutions Licensing Basis Methodology for Reload Application," August 1996.20. BAW-10247PA, "Realistic Thermal-Mechanical Fuel Rod Methodology for Boiling Water Reactors," Revision 0, April 2008.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design Design CaIc. No. 1B21-2010 B1C20 Core Operating Limits Report Page 15, Revision 0 21. ANP-10298PA, "ACE/ATRIUM 10XM Critical Power Correlation," Revision 0, March 2010.22. NEDC-31654P, "Maximum Extended Operating Domain Analysis for Brunswick Steam Electric Plant," February 1989.23. NEDO-31960-A, "BWR Owners Group Long-Term Stability Solutions Licensing Methodology," November 1995.24. GENE-C51-00251-00-01, "Licensing Basis Hot Bundle Oscillation Magnitude for Brunswick 1 and 2," Revision 0, March 2001.25. OG02-0119-260 "Backup Stability Protection (BSP) for Inoperable Option Ill Solution, GE Nuclear Energy," July 17, 2002.26. BAW-10255PA, "Cycle Specific DIVOM Methodology Using the RAMONA5-FA Code," Revision 2, May 2008.27. Design Calculation 1C51-0001, "Power Range Neutron Monitoring System Setpoint Uncertainty and Scaling Calculation (1-C51-APRM 1 through 4 Loops and 1-C51-RBM-A and B Loops)", Revision 3, May 2004.28. BNP Design Calculation 0B21-1015, "BNP Power/Flow Maps," Revision 7, 03/25/2008.

29. ANP-3263(P), "Brunswick Unit 1 Cycle 20 Reload Safety Analysis", Revision 1, January 2014.30. BNP Design Calculation 1B21-2010, "Preparation of the B1C20 Core Operating Limits Report", Revision 0.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 16, Revision 0 Table 1 RBM System Setpoints 1 Setpoint a Setpoint Value Allowable Value Lower Power Setpoint (LPSP b) < 27.7 < 29.0 Intermediate Power Setpoint (IPSPb) < 62.7 < 64.0 High Power Setpoint (HPSPb) < 82.7 < 84.0 Low Trip Setpoint (LTSPc'd)

< 117.1 < 117.6 Intermediate Trip Setpoint (ITSPc') _< 112.3 < 112.8 High Trip Setpoint (HTSPc'd)

< 107.3 < 107.8 RBM Time Delay (tN2) 0 seconds < 2.0 seconds a See Table 2jor RBM Operability Requirements[Setpoints in percent of Rated Thermal Power.c $fSetpoints relative to a full scalereading of 125. For example, <.117,1 means,:1;,< 11 A 12 .. ..tl s ae d Trip setpoints and allowable values are based on a HTSP Analytical Limit of 110.2 w..h RBM filter.1 This table is referred to by Technical Specification 3.3.2.1 (Table 3.3.2.1-1) and 5.6.5.a.5.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 17, Revision 0 Table 2 RBM Operability Requirements 2 IF the following conditions are met, THEN RBM Not Required Operable Thermal Power (% rated)MCPR>29% and < 90% 1.76 SLO 9%1.76 SLO> 90% >: 1.52 TLO 2 Requirements valid for all fuel designs, all SCRAM insertion times and all core average exposure ranges.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1 B21-2010 Page 18, Revision 0 Table 3 PBDA Setpoints 3 Amplitude Trip OLMCPR(SS)

OLMCPR(2PT)

Setpoint (SO)1.05 1.21 1.18 1.06 1.23 1.20 1.07 1.25 1.22 1.08 1.27 1.24 1.09 1.29 1.25 1.10 1.31 1.27 1.11 1.33 1.29 1.12 1.35 1.31 1.13 1.37 1.33 1.14 1.39 1.35 1.15 1.41 1.38 Acceptance Criteria Off-rated OLMCPR @ Rated Power 45% Flow OLMCPR This table is referred to by Technical Specification 3.3.1.1 (Table 3.3.1.1-1) and 5.6.5.a.4.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Table 4 Exposure Basis 4 for Brunswick Unit 1 Cycle 20 Transient Analysis Design Calc. No. 1 B21-2010 Page 19, Revision 0 Core Average Exposure Comments (MWd/MTU)Break point for exposure-dependent MCPRp 32,375 limits (NEOC)34,532 Design basis rod patterns to EOFP + 15 EFPD (EOCLB)End of cycle with FFTR/Coastdown

-36,292 Maximum Core Exposure (MCE)4 The exposure basis for the defined break points is the core average exposure (CAVEX) values shown above regardless of the actual BOC CAVEX value of the As-Loaded Core.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 11B21-2010 Page 20, Revision 0 Table 5 Power-Dependent MCPRp Limits 5 NSS Insertion Times BOC to < NEOC EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) MCPRp MCPRp 100.0 1.35 1.48 90.0 1.40 1.50 80.0 1.51 65.0 1.67 Base Case 50.0 1.69 1.71 Operation

> 65%F 5 65%F > 65%F < 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.38 1.51 90.0 1.40 1.53 80.0 1.57 65.0 1.67 50.0 1.69 1.71 TBVOOS > 65%F < 65%F > 65%F < 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 3.19 3.02 3.36 3.20 23.0 3.42 3.27 3.54 3.42 100.0 1.35 1.48 90.0 1.40 1.50 80.0 1.51 65.0 1.67 HOS 50.0 1.69 1.71> 65%F < 65%F > 65%F -1 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.39 1.51 90.0 1.41 1.53 80.0 1.57 65.0 1.67 TBVOOS 50.0 1.69 1.73 and and > 65%F < 65%F > 65%F < 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 3.19 3.02 3.36 3.20 23.0 3.42 3.27 3.54 3.42 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

For single-loop operation, the TLO MCPRp limits shown above must be adjusted by adding 0.03. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Table 6 Power-Dependent MCPRp Limits 6 TSSS Insertion Times BOC to < NEOC Design CaIc. No. 1B21-2010 Page 21, Revision 0 EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) MCPRp MCPRp 100.0 1.40 1.54 90.0 1.41 1.54 80.0 1.55 65.0 1.67 Base Case 50.0 1.69 1.71 Operation

> 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.00 1.87 26.0 2.29 2.22 2.39 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.43 1.56 90.0 1.45 1.58 80.0 1.61 65.0 1.67 50.0 1.69 1.72 TBVOOS > 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.00 1.87 26.0 2.29 2.22 2.39 2.26 26.0 3.19 3.02 3.36 3.20 23.0 3.42 3.27 3.54 3.42 100.0 1.40 1.54 90.0 1.41 1.54 80.0 1.55 65.0 1.67 E OS 50.0 1.69 1.71> 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.00 1.87 26.0 2.29 2.22 2.39 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.43 1.56 90.0 1.45 1.58 80.0 1.61 TBVOOS 65.0 1.67 and 50.0 1.69 1.76 FHOOS > 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.00 1.87 26.0 2.29 2.22 2.39 2.26 26.0 3.19 3.02 3.36 3.20 1 23.0 3.42 3.27 3.54 3.42 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

For single-loop operation, the TLO MCPRp limits shown above must be adjusted by adding 0.03. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Table 7 Power-Dependent MCPRp Limits 7 NSS Insertion Times BOC to < EOCLB Design Calc. No. 1B21-2010 Page 22, Revision 0 EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) MCPRp MCPRp 100.0 1.37 1.53 90.0 1.40 1.54 80.0 1.55 65.0 1.67 Base Case 50.0 1.69 1.71 Operation

> 65%F < 65%F > 65%F < 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.40 1.55 90.0 1.43 1.57 80.0 1.60 65.0 1.67 50.0 1.69 1.71 TBVOOS > 65%F < 65%F > 65%F < 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 3.19 3.02 3.36 3.20 23.0 3.42 3.27 3.54 3.42 100.0 1.37 1.53 90.0 1.40 1.54 80.0 1.55 65.0 1.67 FHOOS 50.0 1.69 1.71> 65%F < 65%F > 65%F < 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.40 1.55 90.0 1.43 1.57 80.0 1.60 TBVOOS 65.0 1.67 and 50.0 1.69 1.73 FHOOS > 65%F < 65%F > 65%F _< 65%F 50.0 1.91 1.81 1.98 1.87 26.0 2.28 2.22 2.38 2.26 26.0 3.19 3.02 3.36 3.20 1 23.0 3.42 3.27 3.54 3.42 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

For single-loop operation, the TLO MCPRp limits shown above must be adjusted by adding 0.03. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 23, Revision 0 Table 8 Power-Dependent MCPRp Limits 8 TSSS Insertion Times BOC to < EOCLB EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) MCPRp MCPRp 100.0 1.41 1.56 90.0 1.41 1.57 80.0 1.57 65.0 1.67 Base Case 50.0 1.69 1.71 Operation

> 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.00 1.87 26.0 2.29 2.22 2.39 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.44 1.60 90.0 1.45 1.61 80.0 1.63 65.0 1.68 50.0 1.69 1.73 TBVOOS > 65%F _< 65%F > 65%F < 65%F 50.0 1.92 1.82 2.01 1.88 26.0 2.29 2.22 2.40 2.27 26.0 3.19 3.02 3.37 3.21 23.0 3.42 3.27 3.55 3.43 100.0 1.41 1.56 90.0 1.41 1.57 80.0 1.57 65.0 1.67 EOS 50.0 1.69 1.71> 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.00 1.87 26.0 2.29 2.22 2.39 2.26 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.44 1.60 90.0 1.45 1.61 80.0 1.63 TBVOOS 65.0 1.68 and 50.0 1.69 1.77 FHOOS > 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.01 1.88 26.0 2.29 2.22 2.40 2.27 26.0 3.19 3.02 3.37 3.21 23.0 3.42 3.27 3.55 3.43 8 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

For single-loop operation, the TLO MCPRp limits shown above must be adjusted by adding 0.03. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Table 9 Power-Dependent MCPRP Limits 9 NSS Insertion Times BOC to < MCE (FFTR/Coastdown)

Design Calc. No. 1B21-2010 Page 24, Revision 0 EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) MCPRp MCPRP 100.0 1.40 1.57 Base Case 90.0 1.41 1.57 Operation 80.0 1.58 65.0 1.67 (FFTR/FHOOS 50.0 1.69 1.71 included)

> 65%F < 65%F > 65%F < 65%F 50.0 1.91 1.81 1.98 1.87 (Bounds operation 26.0 2.28 2.22 2.38 2.26 with NFWT) 26.0 2.73 2.71 2.91 2.91 23.0 2.91 2.86 3.04 3.04 100.0 1.40 1.57 90.0 1.43 1.58 TBVOOS 80.0 1.61 65.0 1.67 (FFTR/FHOOS 50.0 1.69 1.73 included)

> 65%F < 65%F > 65%F < 65%F (Bounds operation 50.0 1.91 1.81 1.98 1.87 with NFWT) 26.0 2.28 2.22 2.38 2.26 26.0 3.19 3.02 3.36 3.20 23.0 3.42 3.27 3.54 3.42 9 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

For single-loop operation, the TLO MCPRp limits shown above must be adjusted by adding 0.03. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Table 10 Power-Dependent MCPRP Limits 1 0 TSSS Insertion Times BOC to < MCE (FFTR/Coastdown)

Design CaIc. No. 1B21-2010 Page 25, Revision 0 EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) MCPRP MCPRp 100.0 1.48 1.72 Base Case 90.0 1.48 1.72 Operation 80.0 1.72 65.0 1.74 (FFTR/FHOOS 50.0 1.69 1.78 included)

> 65%F < 65%F > 65%F < 65%F 50.0 1.92 1.82 2.07 1.94 (Bounds operation 26.0 2.29 2.22 2.46 2.33 with NFWT) 26.0 2.73 2.71 2.98 2.98 23.0 2.91 2.86 3.11 3.11 100.0 1.48 1.72 90.0 1.48 1.72 TBVOOS 80.0 1.72 65.0 1.74 (FFTR/FHOOS 50.0 1.69 1.83 included)

> 65%F < 65%F > 65%F < 65%F (Bounds operation 50.0 1.92 1.82 2.07 1.94 with NFWT) 26.0 2.29 2.22 2.46 2.33 26.0 3.19 3.02 3.43 3.27 23.0 3.42 3.27 3.61 3.49 10 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

For single-loop operation, the TLO MCPRp limits shown above must be adjusted by adding 0.03. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 26, Revision 0 Table 11 Flow-Dependent MCPRf Limits 1 1 Core Flow ATRIUM 1OXM ATRIUM-10 (% of rated) MCPRf MCPRf 0.0 1.68 1.72 31.0 1.68 1.72 55.0 1.59 1.62 100.0 1.20 1.20 107.0 1.20 1.20 11 Limits valid for all SCRAM insertion times and all core average exposure ranges.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 27, Revision 0 Table 12 AREVA Fuel Steady-State LHGRss Limits Peak ATRIUM 1OXM ATRIUM-10 Pellet Exposure LHGR LHGR (GWd/MTU) (kW/ft) (kW/ft)0.0 14.1 13.4 18.9 14.1 13.4 74.4 7.4 7.1 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design CaIc. No. 1B21-2010 Page 28, Revision 0 Table 13 AREVA Fuel Power-Dependent LHGRFACp Multipliers 1 2 NSS Insertion Times BOC to < EOCLB EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) LHGRFACp LHGRFACp 100.0 1.00 1.00 90.0 1.00 1.00 50.0 0.92 0.90 Base Case > 65%F < 65%F > 65%F < 65%F Operation 50.0 0.86 0.86 0.78 0.86 26.0 0.64 0.72 0.65 0.70 26.0 0.43 0.45 0.43 0.46 23.0 0.41 0.41 0.39 0.43 100.0 1.00 0.91 90.0 1.00 0.91 50.0 0.92 0.85> 65%F < 65%F > 65%F < 65%F TBVOOS 50.0 0.86 0.86 0.78 0.84 26.0 0.64 0.72 0.65 0.70 26.0 0.38 0.45 0.38 0.41 23.0 0.35 0.40 0.35 0.37 100.0 1.00 1.00 90.0 1.00 1.00 50.0 0.92 0.89> 65%F < 65%F > 65%F < 65%F 50.0 0.86 0.86 0.78 0.86 26.0 0.64 0.72 0.65 0.70 26.0 0.43 0.45 0.43 0.46 23.0 0.41 0.41 0.39 0.43 100.0 1.00 0.91 90.0 1.00 0.91 TBVOOS 50.0 0.92 0.84 ad> 65%F < 65%F > 65%F < 65%F FHd 50.0 0.86 0.86 0.78 0.84 26.0 0.64 0.72 0.65 0.70 26.0 0.38 0.45 0.38 0.41 23.0 0.35 0.40 0.35 0.37 12 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 29, Revision 0 Table 14 AREVA Fuel Power-Dependent LHGRFACp Multipliers 1 3 TSSS Insertion Times BOC to < EOCLB EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) LHGRFACp LHGRFACP 100.0 1.00 1.00 90.0 1.00 1.00 50.0 0.92 0.89 Base Case > 65%F < 65%F > 65%F < 65%F Operation 50.0 0.86 0.86 0.76 0.85 26.0 0.64 0.72 0.64 0.70 26.0 0.43 0.45 0.43 0.46 23.0 0.41 0.41 0.39 0.43 100.0 1.00 0.87 90.0 1.00 0.87 50.0 0.92 0.85> 65%F < 65%F > 65%F < 65%F TBVOOS 50.0 0.86 0.86 0.76 0.83 26.0 0.64 0.72 0.64 0.70 26.0 0.38 0.45 0.38 0.41 23.0 0.35 0.40 0.35 0.37 100.0 1.00 1.00 90.0 1.00 1.00 50.0 0.92 0.88> 65%F < 65%F > 65%F < 65%F 50.0 0.86 0.86 0.76 0.85 26.0 0.64 0.72 0.64 0.70 26.0 0.43 0.45 0.43 0.46 23.0 0.41 0.41 0.39 0.43 100.0 1.00 0.87 90.0 1.00 0.87 50.0 0.92 0.83 TBVOOS> 65%F < 65%F > 65%F < 65%F and Fnd 50.0 0.86 0.86 0.76 0.83 26.0 0.64 0.72 0.64 0.70 26.0 0.38 0.45 0.38 0.41 23.0 0.35 0.40 0.35 0.37 13 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design CaIc. No. 1B21-2010 Page 30, Revision 0 Table 15 AREVA Fuel Power-Dependent LHGRFACp Multipliers 1 4 NSS Insertion Times BOC to < MCE (FFTR/Coastdown)

EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) LHGRFACP LHGRFACp Base Case 100.0 1.00 1.00 Operation 90.0 1.00 1.00 50.0 0.92 0.86 (FFTR/FHOOS

> 65%F < 65%F > 65%F < 65%F included) 50.0 0.86 0.86 0.78 0.86 26.0 0.64 0.72 0.65 0.70 (Bounds operation 26.0 0.43 0.45 0.43 0.46 with NFVVT) 23.0 0.41 0.41 0.39 0.43 100.0 1.00 0.91 TBVOOS 90.0 1.00 0.91 50.0 0.92 0.84 (FFTR/FHOOS

> 65%F < 65%F > 65%F < 65%F included) 50.0 0.86 0.86 0.78 0.84 (Bounds operation 26.0 0.64 0.72 0.65 0.70 with NFWT) 26.0 0.38 0.45 0.38 0.41 23.0 0.35 0.40 0.35 0.37 14 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 31, Revision 0 Table 16 AREVA Fuel Power-Dependent LHGRFACp Multipliers 1 5 TSSS Insertion Times BOC to < MCE (FFTR/Coastdown)

EOOS Power ATRIUM 1OXM ATRIUM-10 Condition

(% rated) LHGRFACp LHGRFACp Base Case 100.0 1.00 1.00 Operation 90.0 1.00 1.00 50.0 0.92 0.85 (FFTR/FHOOS

> 65%F < 65%F > 65%F < 65%F included) 50.0 0.86 0.86 0.76 0.85 26.0 0.64 0.72 0.64 0.70 (Bounds operation 26.0 0.43 0.45 0.43 0.46 with NFWT) 23.0 0.41 0.41 0.39 0.43 100.0 1.00 0.86 TBVOOS 90.0 1.00 0.86 50.0 0.92 0.83 (FFTRJFHOOS

> 65%F < 65%F > 65%F < 65%F included) 50.0 0.86 0.86 0.76 0.83 (Bounds operation 26.0 0.64 0.72 0.64 0.70 with NFWT) 26.0 0.38 0.45 0.38 0.41 1 23.0 0.35 0.40 0.35 0.37 15 Limits support operation with any combination of any 1 inoperable SRV, 1 inoperable TBV, up to 40% of the TIP channels out-of-service, and up to 50% of the LPRMs out-of-service.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design CaIc. No. 1 B21-2010 Page 32, Revision 0 Table 17 AREVA Fuel Flow-Dependent LHGRFACf Multipliers 1 6 Core Flow ATRIUM 1OXM ATRIUM-10 (% of rated) LHGRFACf LHGRFACf 0.0 0.58 0.85 31.0 0.58 0.85 65.0 -- 1.00 75.0 1.00 -107.0 1.00 1.00 16 Multipliers valid for all SCRAM insertion times and all core average exposure ranges.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design B1C20 Core Operating Limits Report Design Calc. No. 1B21-2010 Page 33, Revision 0 Table 18 AREVA Fuel Steady-State MAPLHGRss Limits 1 7' 18,19 Average Planar Exposure ATRIUM 1OXM ATRIUM-10 (GWd/MTU)

MAPLHGR MAPLHGR (kW/ft) (kW/ft)0.0 13.1 12.5 15.0 13.1 12.5 67.0 7.7 7.3 17 AREVA Fuel MAPLHGR limits do not have a power or flow dependency.

Thus, the ATRIUM-10 and ATRIUM 1 0XM MAPFACp and the MAPFACf multipliers have a constant value of 1.0 under all conditions.

18 ATRIUM-10 MAPLHGR limits must be adjusted by a 0.85 multiplier when in SLO. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.19 ATRIUM 10XM MAPLHGR limits must be adjusted by a 0.80 multiplier when in SLO. SLO not permitted for FHOOS, TBVOOS or MSIVOOS.

Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design BI C20 Core Operating Limits Report Figure 1 Stability Option III Power/Flow Map OPRM Operable, Two Loop Operation, 2923 MWt Design Calc. No. 1 B21-2010 Page 34, Revision 0 This Figure supports Improved Technical Specification 3.3.1.1 and the Technical Requirements Manual Specification 3.3 120.0 110.0 100.0 90.0 80.0 70.0 o 60.0 50.0 40.0 30.0 20.0 10.0 AnA Minimum Maximum (MELLL) (CICF)Core Core Power Flow Flow_ Mlbs/hr Mtbgr 100 76.19 80.47 99 75.04 80.47 98 73.89 80.47 97 72.75 80.47 96 71.61 80.47 95 70.49 80.47 94 69.36 80.47 93 68.25 80.47 92 67.13 80.47 91 66.03 80.47 90 64.93 80.47 89 63.83 80.47 88 62.74 80.47 87 61.66 80.51 86 60.58 80.60 85 59.50 80.69 84 58.43 80.79 83 57.37 80.90 82 56.31 81.05 81 55.25 81.21 80 54.20 81.36 79 53.16 81.51 78 52.12 81.67 77 51.08 81.82 76 50.05 81.98 75 49.02 82.13 74 48.00 82.29 73 46.98 82.44 72 45.96 82.60 71 44.95 82.75 70 43.94 82.91 69 42.94 83.06 68 41.94 83.22 67 40.95 83.37 66 39.96 83.52 65 38.97 83.68 64 37.99 83.83 63 37.01 83.99 62 36.04 84.14 61 35.06 84.30 60 34.10 84.45 59 33.13 84.61 58 32.17 84.70 V V m 0.0 7.7 15.4 23.1 30.8 38.5 46.2 53.9 61.6 69.3 77.0 84.7 92.4 Mlbs/hr Core Flow 0 10 20 30 40 50 60 70 80 90 100 110 120 % Core Flow

Reference:

0B21-1015, Revision 7 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design BIC20 Core Operating Limits Report Figure 2 Stability Option III Power/Flow Map OPRM Inoperable, Two Loop Operation, 2923 MWt Design Calc. No. 11B21-2010 Page 35, Revision 0 I This Figure supports Improved Technical Specification 3.3.1.1 and the Technical Requirements Manual Specification 3.3 120.0 110.0 100.0 90.0 80.0 70.0 o 60.0 50.0 40.0 30.0 20.0 10.0 0.0 Minimum Maximum (MELLL) (ICF)Core Core Power Flow Flow M bzbs/r Mlbs/hr 100 76.19 80.47 99 75.04 80.47 98 73.89 80.47 97 72.75 80.47 96 71.61 80.47 95 70.49 80.47 94 69.36 80.47 93 68.25 80.47 92 67.13 80.47 91 66.03 80.47 90 64.93 80.47 89 63.83 80.47 88 62.74 80.47 87 61.66 80.51 86 60.58 80.60 83 59.50 80.69 84 58.43 80.79 83 57.37 80.90 82 56.31 81.05 81 55.25 81.21 80 54.20 81.36 79 53.16 81.51 78 52.12 81.67 77 51.08 81.82 76 50.05 81.98 75 49.02 82.13 74 48.00 82.29 73 46.98 82.44 72 45.96 82.60 71 44.95 82.75 70 43.94 82.91 69 42.94 83.06 68 41.94 83.22 67 40.95 83.37 66 39.96 83.52 65 38.97 83.68 64 37.99 83.83 63 37.01 83.99 62 36.04 84.14 61 35.06 84.30 60 34.10 84.45 59 33.13 84.61 58 32.17 84.70 0.0 7.7 15.4 23.1 30.8 38.5 46.2 53.9 61.6 69.3 77.0 84.7 92.4 Mlbs/hr Core Flow 0 10 20 30 40 50 60 70 80 90 100 110 120 % Core Flow

Reference:

0B21-1015, Revision 7 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design BIC20 Core Operating Limits Report Figure 3 Stability Option III Power/Flow Map OPRM Operable, Single Loop Operation, 2923 MWt Design Calc. No. 1B21-2010 Page 36, Revision 0 I This Figure supports Improved Technical Specification 3.3.1.1 and the Technical Requirements Manual Specification 3.3 120.0 110.0 100.0 90.0 80.0 70.0 6 60.0 50.0 40.0 30.0 20.0 10.0 0.0 Minimum Maximum (MELLL) (ICF)Core Core Power Flow Flow% Mlbs/hr Mlbs/hr 100 76.19 80.47 99 75.04 80.47 98 73.89 80.47 97 72.75 80.47 96 71.61 80.47 95 70.49 80.47 94 69.36 80.47 93 68.25 80.47 92 67.13 80.47 91 66.03 80.47 90 64.93 80.47 89 63.83 80.47 88 62.74 80.47 87 61.66 80.51 86 60.58 80.60 85 59.50 80.69 84 58.43 80.79 83 57.37 80.90 82 56.31 81.05 81 55.25 81.21 80 54.20 81.36 79 53.16 81.51 78 52.12 81.67 77 51.08 81.82 76 50.05 81.98 75 49.02 82.13 74 48.00 82.29 73 46.98 82.44 72 45.96 82.60 71 44.95 82.75 70 43.94 82.91 69 42.94 83.06 68 41.94 83.22 67 40.95 83.37 66 39.96 83.52 65 38.97 83.68 64 37.99 83.83 63 37.01 83.99 62 36.04 84.14 61 35.06 84.30 60 34.10 84.45 59 33.13 84.61 58 32.17 84.70 0.0 7.7 15.4 23.1 30.8 38.5 46.2 53.9 61.6 69.3 77.0 84.7 92.4 Mlbs/hr Core Flow 0 10 20 30 40 50 60 70 80 90 100 110 120 %Core Flow

Reference:

0B21-1015, Revision 7 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design BI C20 Core Operating Limits Report Figure 4 Stability Option III Power/Flow Map OPRM Inoperable, Single Loop Operation, 2923 MWt Design Calc. No. 1 B21-2010 Page 37, Revision 0 This Figure supports Improved Technical Specification 3.3.1.1 and the Technical Requirements Manual Specification 3.3 L 120.0 110.0 100.0 90.0 80.0 70.0 o 60.0 50.0 40.0 30.0 20.0 10.0 0.0 Minimum Maximum (MELLL) (ICF)Core Core Power Flow Flow% Mlbs/hr Mlbs/hr 100 76.19 80.47 99 75.04 80.47 98 73.89 80.47 97 72.75 80.47 96 71.61 80.47 95 70.49 80.47 94 69.36 80.47 93 68.25 80.47 92 67.13 80.47 91 66.03 80.47 90 64.93 80.47 89 63.83 80.47 88 62.74 80.47 87 61.66 80.51 86 60.58 80.60 85 59.50 80.69 84 58.43 80.79 83 57.37 80.90 82 56.31 81.05 81 55.25 81.21 80 54.20 81.36 79 53.16 81.51 78 52.12 81.67 77 51.08 81.82 76 50.05 81.98 75 49.02 82.13 74 48.00 82.29 73 46.98 82.44 72 45.96 82.60 71 44.95 82.75 70 43.94 82.91 69 42.94 83.06 68 41.94 83.22 67 40.95 83.37 66 39.96 83.52 65 38.97 83.68 64 37.99 83.83 63 37.01 83.99 62 36.04 84.14 61 35.06 84.30 60 34.10 84.45 59 33.13 84.61 58 32.17 84.70 0.0 7.7 15.4 23.1 30.8 38.5 46.2 53.9 61.6 69.3 77.0 84.7 92.4 Mlbs/hr Core Flow 0 10 20 30 40 50 60 70 80 90 100 110 120 % Core Flow

Reference:

0821-1015, Revision 7 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design BIC20 Core Operating Limits Report Design Calc. No. 11B21-2010 Page 38, Revision 0 Figure 5 Stability Option III Power/Flow Map OPRM Operable, FWTR, 2923 MWt I This Figure supports Improved Technical Specification 3.3.1.1 and the Technical Requirements Manual Specification 3.3 120.0 110.0 100.0 90.0 80.0 70.0 o 60.0 50.0 40.0 30.0 20.0 10.0 n.0 Minimum Maximum (MELLL) (ICF)Core Core Power Flow Flow% MWbs/hr Mlbs/hr 100 76.19 80.47 99 75.04 80.47 98 73.89 80.47 97 72.75 80.47 96 71.61 80.47 95 70.49 80.47 94 69.36 80.47 93 68.25 80.47 92 67.13 80.47 91 66.03 80.47 90 64.93 80.47 89 63.83 80.47 88 62.74 80.47 87 61.66 80.51 86 60.58 80.60 85 59.50 80.69 84 58.43 80.79 83 57.37 80.90 82 56.31 81.05 81 55.25 81.21 80 54.20 81.36 79 53.16 81.51 78 52.12 81.67 77 51.08 81.82 76 50.05 81.98 75 49.02 82.13 74 48.00 82.29 73 46.98 82.44 72 45.96 82.60 71 44.95 82.75 70 43.94 82.91 69 42.94 83.06 68 41.94 83.22 67 40.95 83.37 66 39.96 83.52 65 38.97 83.68 64 37.99 83.83 63 37.01 83.99 62 36.04 84.14 61 35.06 84.30 60 34.10 84.45 59 33.13 84.61 58 32.17 84.70 00v 0.0 7.7 15.4 23.1 30.8 38.5 46.2 53.9 61.6 69.3 77.0 84.7 92.4 Mlbs/hr Core Flow 0 10 20 30 40 50 60 70 80 90 100 110 120 % Core Flow

Reference:

0B21-1015, Revision 7 Duke Energy, Nuclear Fuels Engineering, Nuclear Fuel Design BI C20 Core Operating Limits Report Figure 6 Stability Option III Power/Flow Map OPRM Inoperable, FWTR, 2923 MWt Design Caic. No. 1B21-2010 Page 39, Revision 0 This Figure supports Improved Technical Specification 3.3.1.1 and the Technical Requirements Manual Specification 3.3 120.0 110.0 100.0 90.0 80.0 70.0 o 60.0 50.0 40.0 30.0 20.0 10.0 0.0 Minimum Maximum (MELLL) (ICF)Core Core Power Flow Flow O Mlbs/hr Mlbs/hr 100 76.19 80.47 99 75.04 80.47 98 73.89 80.47 97 72.75 80.47 96 71.61 80.47 95 70.49 80.47 94 69.36 80.47 93 68.25 80.47 92 67.13 80.47 91 66.03 80.47 90 64.93 80.47 89 63.83 80.47 88 62.74 80.47 87 61.66 80.51 86 60.58 80.60 85 59.50 80.69 84 58.43 80.79 83 57.37 80.90 82 56.31 81.05 81 55.25 81.21 80 54.20 81.36 79 53.16 81.51 78 52.12 81.67 77 51.08 81.82 76 50.05 81.98 75 49.02 82.13 74 48.00 82.29 73 46.98 82.44 72 45.96 82.60 71 44.95 82.75 70 43.94 82.91 69 42.94 83.06 68 41.94 83.22 67 40.95 83.37 66 39.96 83.52 65 38.97 83.68 64 37.99 83.83 63 37.01 83.99 62 36.04 84.14 61 35.06 84.30 60 34.10 84.45 59 33.13 84.61 58 32.17 84.70 0.0 0.0 7.7 15.4 23.1 30.8 38.5 46.2 53.9 61.6 69.3 77.0 84.7 92.4 Mlbs/hr Core Flow 0 10 20 30 40 50 60 70 80 90 100 110 120 % Core Flow

Reference:

0B21-1015, Revision 7