Information Notice 2018-01, Noble Fission Gas Releases During Spent Fuel Cask Loading Operations: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 15: | Line 15: | ||
| page count = 9 | | page count = 9 | ||
}} | }} | ||
{{#Wiki_filter: | {{#Wiki_filter:UNITED STATES | ||
NUCLEAR REGULATORY COMMISSION | |||
OFFICE OF NUCLEAR REACTOR REGULATION | |||
OFFICE OF NUCLEAR MATERIAL SAFETY AND SAFEGUARDS | |||
WASHINGTON, DC 20555-0001 February 21, 2018 NRC INFORMATION NOTICE 2018-01: NOBLE FISSION GAS RELEASES DURING | |||
SPENT FUEL CASK LOADING OPERATIONS | |||
==ADDRESSEES== | ==ADDRESSEES== | ||
All holders of or applicants for an operating license or construction permit for a nuclear power | All holders of or applicants for an operating license or construction permit for a nuclear power | ||
Code of Federal Regulations (10 CFR) Part 50, | reactor under Title 10 of the Code of Federal Regulations (10 CFR) Part 50, Domestic | ||
Licensing of Production and Utilization Facilities, including those that have permanently ceased | |||
operations and have spent fuel stored in spent fuel pools. | operations and have spent fuel stored in spent fuel pools. | ||
All holders of or applicants for a combined license issued under 10 CFR Part 52, | All holders of or applicants for a combined license issued under 10 CFR Part 52, Licenses, Certifications, and Approvals for Nuclear Power Plants. | ||
All holders of or applicants for a certificate of compliance (CoC) for a spent fuel transportation | All holders of or applicants for a certificate of compliance (CoC) for a spent fuel transportation | ||
package design under 10 CFR Part 71, | package design under 10 CFR Part 71, Packaging and Transportation of Radioactive Material. | ||
All holders of or applicants for a general or specific license for the storage of spent fuel, or for a | |||
CoC of a dry storage system (DSS) under 10 CFR Part 72, Licensing Requirements for the | |||
Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and | |||
Reactor-Related Greater Than Class C Waste. | Reactor-Related Greater Than Class C Waste. | ||
==PURPOSE== | ==PURPOSE== | ||
The U.S. Nuclear Regulatory Commission (NRC) is | The U.S. Nuclear Regulatory Commission (NRC) is issuing this information notice (IN) to inform | ||
addressees of operating experience related to noble fission gas releases during spent fuel | |||
loading operations, and of the importance of adequate fuel selection and maintaining fuel | loading operations, and of the importance of adequate fuel selection and maintaining fuel | ||
Line 43: | Line 59: | ||
qualification test records to demonstrate that either the spent fuel cladding continues to serve its | qualification test records to demonstrate that either the spent fuel cladding continues to serve its | ||
design function or that follow-up actions are needed. | design function or that follow-up actions are needed. The addressees may review the | ||
information within this IN for applicability to their facilities or DSS designs and consider actions, as appropriate. This IN requires no action or written response on the part of an addressee. | |||
==DESCRIPTION OF CIRCUMSTANCES== | ==DESCRIPTION OF CIRCUMSTANCES== | ||
Several licensees under 10 CFR Part 72 have experienced noble fission gas releases during spent fuel loading operations. | Several licensees under 10 CFR Part 72 have experienced noble fission gas releases during | ||
spent fuel loading operations. In all but one case, the licensees were able to rely on a | |||
combination of fuel selection records, qualification tests, and root-cause analyses to | combination of fuel selection records, qualification tests, and root-cause analyses to | ||
Line 54: | Line 74: | ||
bounds of its design-bases safety analyses. | bounds of its design-bases safety analyses. | ||
The following events provide a sampling of the operating experience associated with noble fission gas releases during spent fuel loading operations. Millstone Power Station, Unit 2 On May 12, 2015, Dominion Resources, the licensee, commenced helium blowdown operations | The following events provide a sampling of the operating experience associated with noble | ||
fission gas releases during spent fuel loading operations. | |||
===ML17234A705 Millstone Power Station, Unit 2=== | |||
On May 12, 2015, Dominion Resources, the licensee, commenced helium blowdown operations | |||
on a NUHOMS-32PT dry shielded canister (DSC) being loaded with Unit 2 spent fuel. During | |||
the blowdown evolution, the licensee received local radiation alarms and observed a spike in | |||
activity with the spent fuel pool (SFP) ventilation radiation monitor. In response to the alarms, the licensee suspended additional drying activities and placed the DSC in a safe condition, including maintaining the spent fuel in an inert environment with the required helium | |||
overpressure. The licensee obtained detectable krypton (Kr)-85 results from a sample taken | |||
directly from the DSC and completed a fuel cladding integrity assessment that involved | |||
confirming that the fuel was adequately selected in accordance with the technical specifications | |||
- | for CoC 72-1004 (i.e., undamaged fuel, cladding may contain only hairline cracks or pinholes) | ||
and evaluated the potential of fission gas release through hairline cracks or pinholes. | |||
The licensee reviewed pertinent fuel selection records, which included visual inspection of all | |||
four sides of each assembly, reactor operating records to confirm loaded assemblies originated | |||
from a cycle without known fuel failures, or other fuel qualification test data (ultrasonic testing | |||
(UT), vacuum can sipping (VCS), and in-mast sipping). In addition, the licensee completed a | |||
review of known cladding failure mechanisms in the reactor, in wet storage, and during dry | review of known cladding failure mechanisms in the reactor, in wet storage, and during dry | ||
storage to determine potential causes for the release. | storage to determine potential causes for the release. From this review, the licensee | ||
determined that 15 of the loaded assemblies originated from cycles that experienced grid-to-rod | determined that 15 of the loaded assemblies originated from cycles that experienced grid-to-rod | ||
fretting (GTRF), which is known to cause cladding thinning during operations. | fretting (GTRF), which is known to cause cladding thinning during operations. The licensee | ||
concluded that an existing nearly through-wall cladding breach would be exposed to an | |||
increased differential pressure during draining and vacuum drying (because of the increasing | |||
fuel temperature and reduced external pressure), which could lead to a non-gross failure. | fuel temperature and reduced external pressure), which could lead to a non-gross failure. | ||
Line 78: | Line 120: | ||
However, a failure resulting from gradual changes in pressure during blowdown and drying | However, a failure resulting from gradual changes in pressure during blowdown and drying | ||
operations is expected to be non-gross with limited propagation, as the pressure differential is relieved after failure. | operations is expected to be non-gross with limited propagation, as the pressure differential is | ||
relieved after failure. As additional follow-up, the licensee characterized water samples | |||
collected from the vacuum drying condensate and the vacuum pump casing, which did not | |||
identify the presence of heavy metals. | identify the presence of heavy metals. The licensee also confirmed that the fuel had remained | ||
in an inert environment without experiencing oxidizing effects, and that the fuel cladding | in an inert environment without experiencing oxidizing effects, and that the fuel cladding | ||
Line 86: | Line 132: | ||
temperature was maintained below the approved design-bases limit. | temperature was maintained below the approved design-bases limit. | ||
On completion of this review, the licensee concluded that the fuel was adequately selected and the cladding was adequately protected against gross ruptures. | On completion of this review, the licensee concluded that the fuel was adequately selected and | ||
the cladding was adequately protected against gross ruptures. The licensee resumed loading | |||
operations on May 28, 2015, and the DSC was subsequently transferred to the storage pad. | operations on May 28, 2015, and the DSC was subsequently transferred to the storage pad. | ||
Additional information is available in NRC Inspection Report, | Additional information is available in NRC Inspection Report, Millstone Power Station - | ||
Integrated Inspection Report 0500336/2015002 and 05000423/2015002 and Independent Spent Fuel Storage Installation Report 07200047/2015001, August 10, 2015 (Agencywide Documents | Integrated Inspection Report 0500336/2015002 and 05000423/2015002 and Independent Spent | ||
Fuel Storage Installation Report 07200047/2015001, August 10, 2015 (Agencywide Documents | |||
Calvert Cliffs Nuclear Power Plant, Unit 1 On September 17, 2015 and October 8, 2015, the Unit 1 wide range noble fission gas monitor detected Kr-85 releases during vacuum drying of DSC-77 and DSC-78, respectively. | Access and Management System (ADAMS) Accession No. ML15222A834). | ||
===Calvert Cliffs Nuclear Power Plant, Unit 1=== | |||
On September 17, 2015 and October 8, 2015, the Unit 1 wide range noble fission gas monitor | |||
detected Kr-85 releases during vacuum drying of DSC-77 and DSC-78, respectively. Exelon | |||
Generation Company, the licensee, performed an apparent cause analysis to define potential | Generation Company, the licensee, performed an apparent cause analysis to define potential | ||
cladding failure initiators and release mechanisms. | cladding failure initiators and release mechanisms. The investigation concluded the probable | ||
cause to be latent near-through-wall failure sites which fully opened when subjected to the | cause to be latent near-through-wall failure sites which fully opened when subjected to the | ||
vacuum environment. The licensee performed technical evaluations in response to each event, using release magnitude and rate in order to characterize the nature of any new cladding breach. | vacuum environment. The licensee performed technical evaluations in response to each event, using release | ||
magnitude and rate in order to characterize the nature of any new cladding breach. For both | |||
DSCs, the licensee demonstrated that the loaded fuel remained undamaged. | DSCs, the licensee demonstrated that the loaded fuel remained undamaged. | ||
Line 107: | Line 164: | ||
As corrective actions, the licensee developed procedural guidance providing immediate | As corrective actions, the licensee developed procedural guidance providing immediate | ||
response to any future area alarms that might occur, including field worker actions and technical evaluations. | response to any future area alarms that might occur, including field worker actions and technical | ||
evaluations. Additionally, the licensee will perform VCS several months prior to each loading | |||
campaign in the interest of potentially identifying any legacy fuel that would be vulnerable to | |||
failures during drying. | failures during drying. | ||
Arkansas Nuclear One, Units 1 and 2 September 2014 On September 12, 2014, the control room emergency ventilation system at Arkansas Nuclear One (ANO) was unexpectedly triggered, placing both Unit 1 and 2 control rooms on emergency recirculation because of increased radiation levels. | ===Arkansas Nuclear One, Units 1 and 2=== | ||
September 2014 On September 12, 2014, the control room emergency ventilation system at Arkansas Nuclear | |||
One (ANO) was unexpectedly triggered, placing both Unit 1 and 2 control rooms on emergency | |||
recirculation because of increased radiation levels. The event occurred during the process of | |||
decreasing the helium pressure from Phase 1 to Phase 2 operations during forced helium | |||
dehydration (FHD) drying of a Multipurpose Canister (MPC)-24, which was being loaded under | dehydration (FHD) drying of a Multipurpose Canister (MPC)-24, which was being loaded under | ||
the requirements of Amendment 5 of CoC 72-1014. | the requirements of Amendment 5 of CoC 72-1014. In accordance with loading procedures, Entergy Operations, Inc., the licensee, stabilized the pressure of the MPC and suspended | ||
additional pressure changes. | additional pressure changes. | ||
Line 121: | Line 189: | ||
Certificate of Compliance 72-1014 defines allowable contents as intact fuel assemblies without | Certificate of Compliance 72-1014 defines allowable contents as intact fuel assemblies without | ||
known or suspected cladding breaches greater than pinhole leaks or hairline cracks. | known or suspected cladding breaches greater than pinhole leaks or hairline cracks. The | ||
licensee characterized a sample of the helium vented from the MPC, which identified Kr-85 levels representative of a cladding breach in one or more fuel rods within the MPC. A review of | |||
records of individual sipping traces and ultrasonic testing inspection of the assemblies did not | |||
reveal the presence of a fuel rod breach. All fuel had been visually examined before loading for | |||
indications of rod or assembly damage, or other potential issues. None of the subject | |||
assemblies contained visible rod or assembly anomalies. | assemblies contained visible rod or assembly anomalies. As a result, all of the assemblies | ||
loaded into the MPC were originally classified as intact, consistent with the certificate of | loaded into the MPC were originally classified as intact, consistent with the certificate of | ||
Line 133: | Line 207: | ||
The CoC holder recommended that the licensee finish the FHD drying process and backfill to | The CoC holder recommended that the licensee finish the FHD drying process and backfill to | ||
the CoC technical specification requirements while monitoring for increasing Kr-85 levels. | the CoC technical specification requirements while monitoring for increasing Kr-85 levels. The | ||
licensee agreed with the CoC holders assessment and completed the drying and backfill | |||
process, electing to complete the closure welding of the MPC (i.e., closure welding and | |||
nondestructive examination of the port cap covers and closure ring), placing the MPC in a fully | |||
contained and passive cooling condition. | |||
The licensee performed an apparent cause evaluation that determined two potential causes for | |||
the release (ADAMS Accession No. ML14286A037). The licensee cited both the prevalence of | |||
GTRF in the operating cycles of the subject assemblies, which may produce breaches larger | |||
than a pinhole, and the limitations of ultrasonic testing in accurately identifying leaking fuel. The | |||
licensee further cited the potential for fuel failure caused by depressurization of the MPC. | licensee further cited the potential for fuel failure caused by depressurization of the MPC. | ||
Line 147: | Line 231: | ||
change during the relevant FHD operation. | change during the relevant FHD operation. | ||
As a corrective action, the licensee elected to conservatively reclassify the fuel loaded into the MPC as damaged and submitted an exemption request from the requirements in 10 CFR 72.212(a)(2) and 10 CFR 72.212(b)(11), as the loaded MPC had not been approved for damaged fuel. | As a corrective action, the licensee elected to conservatively reclassify the fuel loaded into the | ||
MPC as damaged and submitted an exemption request from the requirements in 10 CFR 72.212(a)(2) and 10 CFR 72.212(b)(11), as the loaded MPC had not been approved for | |||
damaged fuel. The licensee identified additional corrective actions that included precluding the | |||
loading of fuel not tested through in-mast sipping or not originating from a failure-free cycle as | loading of fuel not tested through in-mast sipping or not originating from a failure-free cycle as | ||
Line 155: | Line 243: | ||
DSSs with potentially leaking fuel pins (in recognition of potential future transport). | DSSs with potentially leaking fuel pins (in recognition of potential future transport). | ||
Additional information is available in NRC | Additional information is available in NRC Inspection Report, Arkansas Nuclear One, Units 1, 2, and Independent Spent Fuel Storage Installation (ISFSI) - NRC Inspection Report | ||
05000313/2015011, 05000368/2015011, and 07200013/2015001, dated January 21, 2016 (ADAMS Accession No. ML16021A485). | |||
August 2015 On August 21, 2015, the licensees process radiation monitor for Unit 2 spent fuel area alarm | |||
was activated, which tripped the exhaust system. The alarm activated during the process of | |||
decreasing the helium pressure from Phase 1 to Phase 2 operations during FHD drying of a | |||
MPC-32 canister being loaded under CoC 72-1014. The licensee obtained a gas sample from | |||
the condensate discharge line to the SFP, which the licensee stated was representative of the | |||
MPC atmosphere. | MPC atmosphere. The licensee characterized the sample and identified fission product gas | ||
Kr-85. | Kr-85. | ||
The licensee reviewed fuel selection records and verified that the MPC contained only fuel assemblies that were either discharged after operating in a failure-free cycle or were in-mast | The licensee reviewed fuel selection records and verified that the MPC contained only fuel | ||
assemblies that were either discharged after operating in a failure-free cycle or were in-mast | |||
sipped to confirm them as intact. The sipping trace data confirmed no anomalies that would | |||
contradict the licensees conclusions that the selected fuel assemblies were intact. All | |||
assemblies had been visually examined prior to MPC loading for evidence of cladding damage. | |||
The licensee confirmed that the MPC had remained under a helium atmosphere, which would | |||
limit the potential for the fuel cladding to undergo unanticipated oxidation. The licensees | |||
description of temperatures measured from drying inlet and outlet readouts gave no evidence | |||
that peak cladding temperatures exceeded those defined in the design bases, consistent with | |||
the guidance in NUREG-1536, Revision 1, Standard Review Plan for Dry Cask Storage | |||
Systems, dated July 2010 (ADAMS Accession No. ML101040620). | |||
The licensee identified that there was still a potential that radiochemical analyses would not | |||
have identified a very tight (pinhole) fuel failure, even if the assembly originated from a cycle | |||
declared failure-free. Gross failures, which would classify the fuel as damaged, would be much | |||
more easily detectable by in-mast sipping. Therefore, the licensee concluded that any failure | |||
from a declared failure-free cycle or missed by in-mast sipping would be expected to be a | |||
pinhole leak and that the MPC met the certificate of compliance technical specifications | |||
definition for intact fuel. | |||
Additional information is available in NRC Inspection Report, Arkansas Nuclear One, Units 1, 2, and Independent Spent Fuel Storage Installation (ISFSI) - NRC Inspection Report | |||
05000313/2015011, 05000368/2015011, 07200013/2015001, dated January 21, 2016 (ADAMS | |||
Accession No. ML16021A485). | |||
==BACKGROUND== | ==BACKGROUND== | ||
As required by 10 CFR 72.122(h)(1), the spent fuel cladding is to be protected against degradation that leads to gross ruptures or the fuel must be otherwise confined such that degradation of the fuel during storage will not pose operational safety problems with respect to its removal from storage. | As required by 10 CFR 72.122(h)(1), the spent fuel cladding is to be protected against | ||
degradation that leads to gross ruptures or the fuel must be otherwise confined such that | |||
degradation of the fuel during storage will not pose operational safety problems with respect to its removal from storage. In addition, per 10 CFR 72.122(l), the DSS must be designed to allow | |||
approved design bases (see NUREG-1536, Revision 1). | ready retrieval of the spent fuel, which may be on an assembly basis in accordance with the | ||
approved design bases (see NUREG-1536, Revision 1). In transportation, the chemical and | |||
physical form of the spent fuel must be accurately specified (10 CFR 71.33(b)(3)), the geometric | physical form of the spent fuel must be accurately specified (10 CFR 71.33(b)(3)), the geometric | ||
Line 201: | Line 318: | ||
form of the package contents must not be substantially altered during normal conditions of | form of the package contents must not be substantially altered during normal conditions of | ||
transport (10 CFR 71.55(d)(2)), and the package is to be proper for the contents to be shipped | transport (10 CFR 71.55(d)(2)), and the package is to be proper for the contents to be shipped | ||
configuration remains within the bounds of the reviewed safety analyses. | (10 CFR 71.87(a)). Therefore, for undamaged and intact assemblies, the fuel cladding serves a | ||
design function in both DSSs and transportation packages for assuring that the spent fuel | |||
configuration remains within the bounds of the reviewed safety analyses. If the fuel is classified | |||
as damaged, a separate canister (e.g. can for damaged fuel) that confines the assembly to a | as damaged, a separate canister (e.g. can for damaged fuel) that confines the assembly to a | ||
known volume may be used to provide this assurance. | known volume may be used to provide this assurance. NUREG-1536, Revision 1, provides | ||
NRC staff guidance on fuel classification and definitions of breached spent fuel rods, pinhole | |||
leaks, hairline cracks, and gross cladding breaches. | |||
The technical specifications of the license or CoC generally define the allowable cladding | |||
condition for the spent fuel contents, and the nomenclature may vary from system to system. | |||
For example, the terms intact and undamaged have both been used historically to | |||
describe cladding without any known gross cladding breaches. Per 10 CFR 72.212(b)(3), | |||
10 CFR 72.212(b)(11), and 10 CFR 71.17(c)(2), users of DSSs and transportation packages are | 10 CFR 72.212(b)(11), and 10 CFR 71.17(c)(2), users of DSSs and transportation packages are | ||
Line 220: | Line 347: | ||
they must maintain records that reasonably demonstrate that loaded fuel was adequately | they must maintain records that reasonably demonstrate that loaded fuel was adequately | ||
selected, in accordance with their approved site procedures and quality assurance (QA) | selected, in accordance with their approved site procedures and quality assurance (QA) | ||
program. | program. | ||
Line 227: | Line 354: | ||
fuel cladding does not contain gross breaches. | fuel cladding does not contain gross breaches. | ||
Reactor Operating Records | ===Reactor Operating Records=== | ||
The guidance in NUREG-1536, Revision 1, states that evidence of only gaseous or volatile | The guidance in NUREG-1536, Revision 1, states that evidence of only gaseous or volatile | ||
decay products (no heavy metals) in the reactor coolant system may provide evidence that a | decay products (no heavy metals) in the reactor coolant system may provide evidence that a | ||
cladding breach is no larger than a pinhole leak or hairline crack. | cladding breach is no larger than a pinhole leak or hairline crack. Records showing the | ||
presence of heavy metal isotopes that are characteristic of fuel release in the reactor coolant system may indicate gross breaches in the cladding. | presence of heavy metal isotopes that are characteristic of fuel release in the reactor coolant | ||
system may indicate gross breaches in the cladding. | |||
Licensees may assess whether any missing records from early reactor operation, such as those | Licensees may assess whether any missing records from early reactor operation, such as those | ||
Line 241: | Line 369: | ||
lost because of changes in plant ownership, may impact conclusions made about fuel | lost because of changes in plant ownership, may impact conclusions made about fuel | ||
discharged from a given cycle. | discharged from a given cycle. They may determine whether additional fuel qualification is | ||
necessary to provide reasonable assurance that the fuel was properly classified. | |||
Visual examination of selected fuel has a two-fold purpose: | ===Visual Inspection=== | ||
Visual examination of selected fuel has a two-fold purpose: (1) to identify any mechanical | |||
(i.e., cladding breaches greater than 1 mm). | damage to the assembly that may preclude its ability to be retrieved, and (2) to assess the | ||
extent and size of any cladding failure or failures. The guidance in NUREG-1536, Revision 1, states that a visual examination of a breached rod can be used to determine if a breach is gross | |||
(i.e., cladding breaches greater than 1 mm). The extent of visual inspection is generally limited | |||
in assessing flaws behind the spacer grids (e.g., pellet-clad interaction flaws, debris fret) and in | in assessing flaws behind the spacer grids (e.g., pellet-clad interaction flaws, debris fret) and in | ||
rods in the inner matrix. | rods in the inner matrix. Therefore, most licensees use a tape-recorded visual inspection of the | ||
exterior of the fuel assembly only as a supplement to other fuel qualification test data (e.g., | |||
sipping, UT). In addition, accessibility in boiling-water reactor (BWR) assemblies may also be limited by the flow channel. Because of these limitations, unless a licensee can reasonably | |||
demonstrate sufficient resolution and inspection coverage, visual inspection may not provide, on | |||
its own, reasonable assurance that the fuel cladding does not contain gross cladding breaches. | |||
not considered adequate for breach sizing; therefore, licensees generally conservatively classify fuel with detected fission gases as damaged. | ===Fuel Qualification Testing=== | ||
Sipping | |||
Sipping techniques are widely used to identify failed fuel assemblies by detection of radioactive | |||
fission gases (Kr-85, xenon (Xe)-133) released through cladding breaches. The techniques are | |||
not considered adequate for breach sizing; therefore, licensees generally conservatively classify | |||
fuel with detected fission gases as damaged. | |||
Mast sipping is generally performed during refueling operations, as the first lift from the core | Mast sipping is generally performed during refueling operations, as the first lift from the core | ||
Line 265: | Line 408: | ||
generally yields the highest release of fission gases (because of the decreasing water head | generally yields the highest release of fission gases (because of the decreasing water head | ||
pressure). | pressure). Three primary techniques are used depending on the reactor type: (1) in-mast | ||
sipping (pressurized-water reactor (PWR)), (2) telescope sipping (PWR/BWR), and (3) mast | |||
sipping (PWR). The operations vary. For example, in-mast sipping generally employs air | |||
injection at the bottom of the mast to help entrain released fission gases; telescope sipping | |||
generally includes processing a gas sample from a liquid extraction; and mast sipping allows for | generally includes processing a gas sample from a liquid extraction; and mast sipping allows for | ||
sampling at different locations. | sampling at different locations. The NRC staff considers mast sipping records to be adequate | ||
for fuel selection as long as testing is performed at the time of discharge under conditions not | for fuel selection as long as testing is performed at the time of discharge under conditions not | ||
known to result in missed calls. For example, inner core assemblies from cycles with significant | |||
sipping methods that do not use gas entrainment. | GTRF may increase the background counts and mask small-release leakers, particularly for | ||
sipping methods that do not use gas entrainment. Therefore, when determining whether the | |||
fuel is intact or undamaged, the licensee can review mast sipping data considering the | fuel is intact or undamaged, the licensee can review mast sipping data considering the | ||
Line 281: | Line 432: | ||
limitations of the respective technique. | limitations of the respective technique. | ||
Telescope sipping has been used historically for fuel qualification of wet stored fuel (e.g., during | Telescope sipping has been used historically for fuel qualification of wet stored fuel (e.g., during | ||
a significant period may consider the sensitivity of the technique relative to the | SFP transfers). However, the use of telescope sipping for fuel that has been in wet storage for | ||
a significant period may consider the sensitivity of the technique relative to the fuels decreasing | |||
fission gas inventory. International Atomic Energy Agency Nuclear Energy Series No. NF-T-3.6, Management of Damaged Spent Nuclear Fuel, issued June 2009,1 recommends that Xe-133 measurements be performed up to 2 months after discharge and Kr-85 measurements be | |||
performed up to 10 years after discharge. | |||
The industry generally regards VCS as one of the most sensitive fuel qualification techniques | The industry generally regards VCS as one of the most sensitive fuel qualification techniques | ||
currently available, particularly for low-power and low-fission-yield assemblies. | currently available, particularly for low-power and low-fission-yield assemblies. In this | ||
technique, each assembly is individually placed inside an isolation chamber (sealed can) and a | |||
negative pressure is drawn to drive noble fission gas releases (if the cladding is breached), | |||
which are collected at the top of the can. | which are collected at the top of the can. | ||
Ultrasonic Testing | ===Ultrasonic Testing=== | ||
In-bundle UT is generally performed by placing multiple UT wands at a pre-established axial | |||
elevation on the probed assembly. Pressurized water reactor assemblies do not require | |||
dismantling for accessibility; however, de-channeling is generally required for BWR assemblies. | |||
Ultrasonic testing relies on the measurement of the reflected amplitude of a shear wave signal | |||
1 http://www-pub.iaea.org/books/IAEAbooks/8023/Management-of-Damaged-Spent-Nuclear-Fuel as it transverses the cladding tube. Water ingress to the rod leads to UT signal attenuation | |||
(amplitude reduction) and identification of a cladding breach. | |||
The guidance in NUREG-1536, Revision 1, states that ultrasonic testing may be used to classify | |||
rods as unbreached or breached. The licensees review of UT data may be performed while | |||
considering potential technique limitations. More specifically, the licensees review may | |||
consider (1) whether the lack of water inside the fuel rod at the elevation of the UT inspection | |||
can reasonably ensure no water ingress at other axial elevations (particularly for high burnup | |||
fuel, where the interspace between the cladding and the fuel pellet may be closed), (2) the | fuel, where the interspace between the cladding and the fuel pellet may be closed), (2) the | ||
Line 313: | Line 478: | ||
effects of pellet-to-clad interactions, which may produce multiple echo signals that are difficult to | effects of pellet-to-clad interactions, which may produce multiple echo signals that are difficult to | ||
assess, and (3) any potential misalignment of the transducers caused by the presence of Chalk River Unidentified Deposit or oxide flaking, or any fuel rod bowing or geometry changes caused by irradiation (e.g., bowing caused by larger diameter guide tubes). | assess, and (3) any potential misalignment of the transducers caused by the presence of Chalk | ||
River Unidentified Deposit or oxide flaking, or any fuel rod bowing or geometry changes caused | |||
by irradiation (e.g., bowing caused by larger diameter guide tubes). Failures missed due to | |||
these limitations could potentially result in fission gas releases during drying operations if the | these limitations could potentially result in fission gas releases during drying operations if the | ||
cladding condition had not been adequately assessed. | |||
A secondary review of UT data from assemblies loaded during a late 2004 campaign at ANO | |||
reasonably be used to size the identified failures. | resulted in the conservative reclassification of five assemblies loaded in four MPCs as damaged | ||
fuel (ADAMS Accession No. ML052510724). The licensee concluded that UT data could not | |||
reasonably be used to size the identified failures. Therefore, the licensee submitted an | |||
exemption request from the requirements of 10 CFR 72.212(a)(2) and 10 CFR 72.214, which | exemption request from the requirements of 10 CFR 72.212(a)(2) and 10 CFR 72.214, which | ||
included revised safety analyses assuming up to two damaged fuel pins, each in a separate fuel assembly. | included revised safety analyses assuming up to two damaged fuel pins, each in a separate fuel | ||
assembly. In a separate event in 2014, ANO conservatively reclassified an assembly as | |||
damaged following a noble fission gas release (Kr-85) during FHD drying of a loaded MPC | |||
(ADAMS Accession Nos. ML16021A485, ML14286A037). | (ADAMS Accession Nos. ML16021A485, ML14286A037). The licensee cited the prevalence of | ||
GTRF in the operating cycles for the subject assemblies and the lower reliability of UT relative | GTRF in the operating cycles for the subject assemblies and the lower reliability of UT relative | ||
to other fuel qualification test methods as the most likely cause of the event. | to other fuel qualification test methods as the most likely cause of the event. As a corrective | ||
action, the licensee revised operating procedures to avoid the use of UT for future fuel | |||
classification. The licensee for Calvert Cliffs has also chosen to rely on VCS for fuel | |||
classification activities in the interest of | classification activities in the interest of potentially identifying any legacy fuel that may be | ||
vulnerable to releases. | |||
==DISCUSSION== | ==DISCUSSION== | ||
Licensees that experience noble fission gas releases during spent fuel cask loading operations may determine follow-up actions based on a review of fuel selection records, results from | Licensees that experience noble fission gas releases during spent fuel cask loading operations | ||
may determine follow-up actions based on a review of fuel selection records, results from | |||
root-cause or apparent-cause analyses, or other relevant operating experience. | root-cause or apparent-cause analyses, or other relevant operating experience. A licensee may | ||
evaluate whether the design-bases fuel | evaluate whether the design-bases fuel temperature limits were exceeded or whether the fuel | ||
was inadvertently exposed to oxidizing species that compromised cladding integrity. The | |||
guidance in NUREG-1536, Revision 1, states that if fuel oxidation occurred, it may lead to a | |||
configuration not adequately analyzed for radiation dose rates or criticality safety. | configuration not adequately analyzed for radiation dose rates or criticality safety. Additionally, the guidance further states that the release of fuel fines or grain-sized powder into the inner | ||
cask environment from ruptured fuel may be a condition outside of the approved design bases. | cask environment from ruptured fuel may be a condition outside of the approved design bases. | ||
Line 356: | Line 539: | ||
quantifying reliability is difficult because of the low failure rate of modern fuel (about | quantifying reliability is difficult because of the low failure rate of modern fuel (about | ||
0.001 percent). | 0.001 percent). Nevertheless, a licensees evaluation of operating experience may identify | ||
limitations of a given technique, and appropriate actions consistent with the licensees' approved site procedures and QA program are recommended. | limitations of a given technique, and appropriate actions consistent with the licensees' approved | ||
site procedures and QA program are recommended. Such actions may include revising | |||
operating procedures to limit the use of certain techniques, depending on the type of fuel or | |||
sensitivity limits of the instrumentation, as well as assessing the need for secondary characterization. The staff discusses fuel qualification testing, inspection method limitations, and staff considerations in the Background section of this IN. | |||
Releases of detectable gases, such as Kr-85, may also be an indication of a substantive release | Releases of detectable gases, such as Kr-85, may also be an indication of a substantive release | ||
Line 364: | Line 553: | ||
of tritium, which is not readily detectable by plant radiation monitoring instruments or routinely | of tritium, which is not readily detectable by plant radiation monitoring instruments or routinely | ||
used portable survey instruments. | used portable survey instruments. The release of this gas could have implications for | ||
occupational workers, as well as members of the public. Regulations in 10 CFR 20 Subpart C | |||
require summing of internal and external doses. Regulations in 10 CFR 20 Subpart D require | |||
higher quantities of tritium than bundles not containing boron poisons. | monitoring and control of gaseous effluents. Regulations in 10 CFR 20 Subpart F require | ||
performance of adequate surveys. Fuel bundles containing burnable boron poison may contain | |||
higher quantities of tritium than bundles not containing boron poisons. Since personal | |||
dosimetry devices may not respond to gases such as tritium, the need for bioassay of workers | |||
involved with these transients may be evaluated by the licensee at the time of the event. | |||
==CONTACT== | ==CONTACT== | ||
This IN requires no specific action or written response. | This IN requires no specific action or written response. Please direct any questions about this | ||
matter to the technical contact listed below or to the appropriate Office of Nuclear Reactor | |||
Regulation or Office of New Reactors project manager. | Regulation or Office of New Reactors project manager. | ||
/ra/ | /ra/ /ra/ | ||
Michael C. Layton, Director Christopher G. Miller, Director | |||
Division of Spent Fuel Management Division of Inspector and Regional Support | |||
Office of Nuclear Material Safety Office of Nuclear Reactor Regulation | |||
and Safeguards | |||
/ra/ | |||
===Timothy J. McGinty, Director=== | |||
Division of Construction Inspection | |||
and Operational Programs | |||
Office of New Reactors | ===Office of New Reactors=== | ||
===Technical Contact:=== | ===Technical Contact:=== | ||
301-415-7508 E-mail: ricardo.torres@nrc.gov | ===Ricardo Torres, NMSS=== | ||
301-415-7508 E-mail: ricardo.torres@nrc.gov | |||
Note: NRC generic communications may be found on the NRC public Web site, http://www.nrc.gov, under NRC Library/Document Collections. NRC INFORMATION NOTICE 2018-01, NOBLE FISSION GAS RELEASES DURING SPENT | |||
FUEL LOADING OPERATIONS, DATE: February 21, 2018 ADAMS Accession No.: ML17234A705 CAC No. MG0051 OFFICE QTE NMSS/DFSM/RMB NRO/DSEA/RPAC/BC NRR/DSS/D NMSS/DFSM/RMB/BC | |||
NAME CHsu RTorres LBurkhart MGavrilas MRahimi | |||
DATE 01/23/2017 08/15/2017 09/11/2017 10/05/2017 10/13/2017 OFFICE NRR/DIRS/IRGB/PM NRR/DIRS/IRGB /LA NRR/DIRS/IRGB/BC NRO/DCIP/D NMSS/DFSM/D | |||
NAME TGovan ELee HChernoff TMcGinty MLayton | |||
DATE 10/18/2017 10/30/2017 02/01/2018 02/06/2018 02/08/2018 OFFICE NRR/DIRS/D | |||
===NAME CMiller=== | |||
DATE | DATE 02/21/2018 OFFICIAL USE ONLY}} | ||
{{Information notice-Nav}} | {{Information notice-Nav}} |
Latest revision as of 21:36, 29 October 2019
ML17234A705 | |
Person / Time | |
---|---|
Issue date: | 02/21/2018 |
From: | Michael Layton, Mcginty T, Chris Miller Division of Spent Fuel Management, Division of Construction Inspection and Operational Programs, Division of Inspection and Regional Support |
To: | |
Govan T | |
References | |
CAC MG0051 IN 2018-01 | |
Download: ML17234A705 (9) | |
UNITED STATES
NUCLEAR REGULATORY COMMISSION
OFFICE OF NUCLEAR REACTOR REGULATION
OFFICE OF NUCLEAR MATERIAL SAFETY AND SAFEGUARDS
WASHINGTON, DC 20555-0001 February 21, 2018 NRC INFORMATION NOTICE 2018-01: NOBLE FISSION GAS RELEASES DURING
SPENT FUEL CASK LOADING OPERATIONS
ADDRESSEES
All holders of or applicants for an operating license or construction permit for a nuclear power
reactor under Title 10 of the Code of Federal Regulations (10 CFR) Part 50, Domestic
Licensing of Production and Utilization Facilities, including those that have permanently ceased
operations and have spent fuel stored in spent fuel pools.
All holders of or applicants for a combined license issued under 10 CFR Part 52, Licenses, Certifications, and Approvals for Nuclear Power Plants.
All holders of or applicants for a certificate of compliance (CoC) for a spent fuel transportation
package design under 10 CFR Part 71, Packaging and Transportation of Radioactive Material.
All holders of or applicants for a general or specific license for the storage of spent fuel, or for a
CoC of a dry storage system (DSS) under 10 CFR Part 72, Licensing Requirements for the
Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and
Reactor-Related Greater Than Class C Waste.
PURPOSE
The U.S. Nuclear Regulatory Commission (NRC) is issuing this information notice (IN) to inform
addressees of operating experience related to noble fission gas releases during spent fuel
loading operations, and of the importance of adequate fuel selection and maintaining fuel
qualification test records to demonstrate that either the spent fuel cladding continues to serve its
design function or that follow-up actions are needed. The addressees may review the
information within this IN for applicability to their facilities or DSS designs and consider actions, as appropriate. This IN requires no action or written response on the part of an addressee.
DESCRIPTION OF CIRCUMSTANCES
Several licensees under 10 CFR Part 72 have experienced noble fission gas releases during
spent fuel loading operations. In all but one case, the licensees were able to rely on a
combination of fuel selection records, qualification tests, and root-cause analyses to
demonstrate that, despite the release, the spent fuel conditions were maintained within the
bounds of its design-bases safety analyses.
The following events provide a sampling of the operating experience associated with noble
fission gas releases during spent fuel loading operations.
ML17234A705 Millstone Power Station, Unit 2
On May 12, 2015, Dominion Resources, the licensee, commenced helium blowdown operations
on a NUHOMS-32PT dry shielded canister (DSC) being loaded with Unit 2 spent fuel. During
the blowdown evolution, the licensee received local radiation alarms and observed a spike in
activity with the spent fuel pool (SFP) ventilation radiation monitor. In response to the alarms, the licensee suspended additional drying activities and placed the DSC in a safe condition, including maintaining the spent fuel in an inert environment with the required helium
overpressure. The licensee obtained detectable krypton (Kr)-85 results from a sample taken
directly from the DSC and completed a fuel cladding integrity assessment that involved
confirming that the fuel was adequately selected in accordance with the technical specifications
for CoC 72-1004 (i.e., undamaged fuel, cladding may contain only hairline cracks or pinholes)
and evaluated the potential of fission gas release through hairline cracks or pinholes.
The licensee reviewed pertinent fuel selection records, which included visual inspection of all
four sides of each assembly, reactor operating records to confirm loaded assemblies originated
from a cycle without known fuel failures, or other fuel qualification test data (ultrasonic testing
(UT), vacuum can sipping (VCS), and in-mast sipping). In addition, the licensee completed a
review of known cladding failure mechanisms in the reactor, in wet storage, and during dry
storage to determine potential causes for the release. From this review, the licensee
determined that 15 of the loaded assemblies originated from cycles that experienced grid-to-rod
fretting (GTRF), which is known to cause cladding thinning during operations. The licensee
concluded that an existing nearly through-wall cladding breach would be exposed to an
increased differential pressure during draining and vacuum drying (because of the increasing
fuel temperature and reduced external pressure), which could lead to a non-gross failure.
However, a failure resulting from gradual changes in pressure during blowdown and drying
operations is expected to be non-gross with limited propagation, as the pressure differential is
relieved after failure. As additional follow-up, the licensee characterized water samples
collected from the vacuum drying condensate and the vacuum pump casing, which did not
identify the presence of heavy metals. The licensee also confirmed that the fuel had remained
in an inert environment without experiencing oxidizing effects, and that the fuel cladding
temperature was maintained below the approved design-bases limit.
On completion of this review, the licensee concluded that the fuel was adequately selected and
the cladding was adequately protected against gross ruptures. The licensee resumed loading
operations on May 28, 2015, and the DSC was subsequently transferred to the storage pad.
Additional information is available in NRC Inspection Report, Millstone Power Station -
Integrated Inspection Report 0500336/2015002 and 05000423/2015002 and Independent Spent
Fuel Storage Installation Report 07200047/2015001, August 10, 2015 (Agencywide Documents
Access and Management System (ADAMS) Accession No. ML15222A834).
Calvert Cliffs Nuclear Power Plant, Unit 1
On September 17, 2015 and October 8, 2015, the Unit 1 wide range noble fission gas monitor
detected Kr-85 releases during vacuum drying of DSC-77 and DSC-78, respectively. Exelon
Generation Company, the licensee, performed an apparent cause analysis to define potential
cladding failure initiators and release mechanisms. The investigation concluded the probable
cause to be latent near-through-wall failure sites which fully opened when subjected to the
vacuum environment. The licensee performed technical evaluations in response to each event, using release
magnitude and rate in order to characterize the nature of any new cladding breach. For both
DSCs, the licensee demonstrated that the loaded fuel remained undamaged.
As corrective actions, the licensee developed procedural guidance providing immediate
response to any future area alarms that might occur, including field worker actions and technical
evaluations. Additionally, the licensee will perform VCS several months prior to each loading
campaign in the interest of potentially identifying any legacy fuel that would be vulnerable to
failures during drying.
Arkansas Nuclear One, Units 1 and 2
September 2014 On September 12, 2014, the control room emergency ventilation system at Arkansas Nuclear
One (ANO) was unexpectedly triggered, placing both Unit 1 and 2 control rooms on emergency
recirculation because of increased radiation levels. The event occurred during the process of
decreasing the helium pressure from Phase 1 to Phase 2 operations during forced helium
dehydration (FHD) drying of a Multipurpose Canister (MPC)-24, which was being loaded under
the requirements of Amendment 5 of CoC 72-1014. In accordance with loading procedures, Entergy Operations, Inc., the licensee, stabilized the pressure of the MPC and suspended
additional pressure changes.
Certificate of Compliance 72-1014 defines allowable contents as intact fuel assemblies without
known or suspected cladding breaches greater than pinhole leaks or hairline cracks. The
licensee characterized a sample of the helium vented from the MPC, which identified Kr-85 levels representative of a cladding breach in one or more fuel rods within the MPC. A review of
records of individual sipping traces and ultrasonic testing inspection of the assemblies did not
reveal the presence of a fuel rod breach. All fuel had been visually examined before loading for
indications of rod or assembly damage, or other potential issues. None of the subject
assemblies contained visible rod or assembly anomalies. As a result, all of the assemblies
loaded into the MPC were originally classified as intact, consistent with the certificate of
compliance technical specifications.
The CoC holder recommended that the licensee finish the FHD drying process and backfill to
the CoC technical specification requirements while monitoring for increasing Kr-85 levels. The
licensee agreed with the CoC holders assessment and completed the drying and backfill
process, electing to complete the closure welding of the MPC (i.e., closure welding and
nondestructive examination of the port cap covers and closure ring), placing the MPC in a fully
contained and passive cooling condition.
The licensee performed an apparent cause evaluation that determined two potential causes for
the release (ADAMS Accession No. ML14286A037). The licensee cited both the prevalence of
GTRF in the operating cycles of the subject assemblies, which may produce breaches larger
than a pinhole, and the limitations of ultrasonic testing in accurately identifying leaking fuel. The
licensee further cited the potential for fuel failure caused by depressurization of the MPC.
However, it determined the latter apparent cause to be unlikely because of the small pressure
change during the relevant FHD operation.
As a corrective action, the licensee elected to conservatively reclassify the fuel loaded into the
MPC as damaged and submitted an exemption request from the requirements in 10 CFR 72.212(a)(2) and 10 CFR 72.212(b)(11), as the loaded MPC had not been approved for
damaged fuel. The licensee identified additional corrective actions that included precluding the
loading of fuel not tested through in-mast sipping or not originating from a failure-free cycle as
identified by reactor core chemistry records, and adding the subject MPC to an internal record of
DSSs with potentially leaking fuel pins (in recognition of potential future transport).
Additional information is available in NRC Inspection Report, Arkansas Nuclear One, Units 1, 2, and Independent Spent Fuel Storage Installation (ISFSI) - NRC Inspection Report 05000313/2015011, 05000368/2015011, and 07200013/2015001, dated January 21, 2016 (ADAMS Accession No. ML16021A485).
August 2015 On August 21, 2015, the licensees process radiation monitor for Unit 2 spent fuel area alarm
was activated, which tripped the exhaust system. The alarm activated during the process of
decreasing the helium pressure from Phase 1 to Phase 2 operations during FHD drying of a
MPC-32 canister being loaded under CoC 72-1014. The licensee obtained a gas sample from
the condensate discharge line to the SFP, which the licensee stated was representative of the
MPC atmosphere. The licensee characterized the sample and identified fission product gas
The licensee reviewed fuel selection records and verified that the MPC contained only fuel
assemblies that were either discharged after operating in a failure-free cycle or were in-mast
sipped to confirm them as intact. The sipping trace data confirmed no anomalies that would
contradict the licensees conclusions that the selected fuel assemblies were intact. All
assemblies had been visually examined prior to MPC loading for evidence of cladding damage.
The licensee confirmed that the MPC had remained under a helium atmosphere, which would
limit the potential for the fuel cladding to undergo unanticipated oxidation. The licensees
description of temperatures measured from drying inlet and outlet readouts gave no evidence
that peak cladding temperatures exceeded those defined in the design bases, consistent with
the guidance in NUREG-1536, Revision 1, Standard Review Plan for Dry Cask Storage
Systems, dated July 2010 (ADAMS Accession No. ML101040620).
The licensee identified that there was still a potential that radiochemical analyses would not
have identified a very tight (pinhole) fuel failure, even if the assembly originated from a cycle
declared failure-free. Gross failures, which would classify the fuel as damaged, would be much
more easily detectable by in-mast sipping. Therefore, the licensee concluded that any failure
from a declared failure-free cycle or missed by in-mast sipping would be expected to be a
pinhole leak and that the MPC met the certificate of compliance technical specifications
definition for intact fuel.
Additional information is available in NRC Inspection Report, Arkansas Nuclear One, Units 1, 2, and Independent Spent Fuel Storage Installation (ISFSI) - NRC Inspection Report 05000313/2015011, 05000368/2015011, 07200013/2015001, dated January 21, 2016 (ADAMS
Accession No. ML16021A485).
BACKGROUND
As required by 10 CFR 72.122(h)(1), the spent fuel cladding is to be protected against
degradation that leads to gross ruptures or the fuel must be otherwise confined such that
degradation of the fuel during storage will not pose operational safety problems with respect to its removal from storage. In addition, per 10 CFR 72.122(l), the DSS must be designed to allow
ready retrieval of the spent fuel, which may be on an assembly basis in accordance with the
approved design bases (see NUREG-1536, Revision 1). In transportation, the chemical and
physical form of the spent fuel must be accurately specified (10 CFR 71.33(b)(3)), the geometric
form of the package contents must not be substantially altered during normal conditions of
transport (10 CFR 71.55(d)(2)), and the package is to be proper for the contents to be shipped
(10 CFR 71.87(a)). Therefore, for undamaged and intact assemblies, the fuel cladding serves a
design function in both DSSs and transportation packages for assuring that the spent fuel
configuration remains within the bounds of the reviewed safety analyses. If the fuel is classified
as damaged, a separate canister (e.g. can for damaged fuel) that confines the assembly to a
known volume may be used to provide this assurance. NUREG-1536, Revision 1, provides
NRC staff guidance on fuel classification and definitions of breached spent fuel rods, pinhole
leaks, hairline cracks, and gross cladding breaches.
The technical specifications of the license or CoC generally define the allowable cladding
condition for the spent fuel contents, and the nomenclature may vary from system to system.
For example, the terms intact and undamaged have both been used historically to
describe cladding without any known gross cladding breaches. Per 10 CFR 72.212(b)(3),
10 CFR 72.212(b)(11), and 10 CFR 71.17(c)(2), users of DSSs and transportation packages are
required to comply with the license or CoC by selecting and loading the appropriate fuel, and
they must maintain records that reasonably demonstrate that loaded fuel was adequately
selected, in accordance with their approved site procedures and quality assurance (QA)
program.
Licensees may consider several methods, either singular or in combination, to demonstrate that
fuel cladding does not contain gross breaches.
Reactor Operating Records
The guidance in NUREG-1536, Revision 1, states that evidence of only gaseous or volatile
decay products (no heavy metals) in the reactor coolant system may provide evidence that a
cladding breach is no larger than a pinhole leak or hairline crack. Records showing the
presence of heavy metal isotopes that are characteristic of fuel release in the reactor coolant
system may indicate gross breaches in the cladding.
Licensees may assess whether any missing records from early reactor operation, such as those
lost because of changes in plant ownership, may impact conclusions made about fuel
discharged from a given cycle. They may determine whether additional fuel qualification is
necessary to provide reasonable assurance that the fuel was properly classified.
Visual Inspection
Visual examination of selected fuel has a two-fold purpose: (1) to identify any mechanical
damage to the assembly that may preclude its ability to be retrieved, and (2) to assess the
extent and size of any cladding failure or failures. The guidance in NUREG-1536, Revision 1, states that a visual examination of a breached rod can be used to determine if a breach is gross
(i.e., cladding breaches greater than 1 mm). The extent of visual inspection is generally limited
in assessing flaws behind the spacer grids (e.g., pellet-clad interaction flaws, debris fret) and in
rods in the inner matrix. Therefore, most licensees use a tape-recorded visual inspection of the
exterior of the fuel assembly only as a supplement to other fuel qualification test data (e.g.,
sipping, UT). In addition, accessibility in boiling-water reactor (BWR) assemblies may also be limited by the flow channel. Because of these limitations, unless a licensee can reasonably
demonstrate sufficient resolution and inspection coverage, visual inspection may not provide, on
its own, reasonable assurance that the fuel cladding does not contain gross cladding breaches.
Fuel Qualification Testing
Sipping
Sipping techniques are widely used to identify failed fuel assemblies by detection of radioactive
fission gases (Kr-85, xenon (Xe)-133) released through cladding breaches. The techniques are
not considered adequate for breach sizing; therefore, licensees generally conservatively classify
fuel with detected fission gases as damaged.
Mast sipping is generally performed during refueling operations, as the first lift from the core
generally yields the highest release of fission gases (because of the decreasing water head
pressure). Three primary techniques are used depending on the reactor type: (1) in-mast
sipping (pressurized-water reactor (PWR)), (2) telescope sipping (PWR/BWR), and (3) mast
sipping (PWR). The operations vary. For example, in-mast sipping generally employs air
injection at the bottom of the mast to help entrain released fission gases; telescope sipping
generally includes processing a gas sample from a liquid extraction; and mast sipping allows for
sampling at different locations. The NRC staff considers mast sipping records to be adequate
for fuel selection as long as testing is performed at the time of discharge under conditions not
known to result in missed calls. For example, inner core assemblies from cycles with significant
GTRF may increase the background counts and mask small-release leakers, particularly for
sipping methods that do not use gas entrainment. Therefore, when determining whether the
fuel is intact or undamaged, the licensee can review mast sipping data considering the
limitations of the respective technique.
Telescope sipping has been used historically for fuel qualification of wet stored fuel (e.g., during
SFP transfers). However, the use of telescope sipping for fuel that has been in wet storage for
a significant period may consider the sensitivity of the technique relative to the fuels decreasing
fission gas inventory. International Atomic Energy Agency Nuclear Energy Series No. NF-T-3.6, Management of Damaged Spent Nuclear Fuel, issued June 2009,1 recommends that Xe-133 measurements be performed up to 2 months after discharge and Kr-85 measurements be
performed up to 10 years after discharge.
The industry generally regards VCS as one of the most sensitive fuel qualification techniques
currently available, particularly for low-power and low-fission-yield assemblies. In this
technique, each assembly is individually placed inside an isolation chamber (sealed can) and a
negative pressure is drawn to drive noble fission gas releases (if the cladding is breached),
which are collected at the top of the can.
Ultrasonic Testing
In-bundle UT is generally performed by placing multiple UT wands at a pre-established axial
elevation on the probed assembly. Pressurized water reactor assemblies do not require
dismantling for accessibility; however, de-channeling is generally required for BWR assemblies.
Ultrasonic testing relies on the measurement of the reflected amplitude of a shear wave signal
1 http://www-pub.iaea.org/books/IAEAbooks/8023/Management-of-Damaged-Spent-Nuclear-Fuel as it transverses the cladding tube. Water ingress to the rod leads to UT signal attenuation
(amplitude reduction) and identification of a cladding breach.
The guidance in NUREG-1536, Revision 1, states that ultrasonic testing may be used to classify
rods as unbreached or breached. The licensees review of UT data may be performed while
considering potential technique limitations. More specifically, the licensees review may
consider (1) whether the lack of water inside the fuel rod at the elevation of the UT inspection
can reasonably ensure no water ingress at other axial elevations (particularly for high burnup
fuel, where the interspace between the cladding and the fuel pellet may be closed), (2) the
effects of pellet-to-clad interactions, which may produce multiple echo signals that are difficult to
assess, and (3) any potential misalignment of the transducers caused by the presence of Chalk
River Unidentified Deposit or oxide flaking, or any fuel rod bowing or geometry changes caused
by irradiation (e.g., bowing caused by larger diameter guide tubes). Failures missed due to
these limitations could potentially result in fission gas releases during drying operations if the
cladding condition had not been adequately assessed.
A secondary review of UT data from assemblies loaded during a late 2004 campaign at ANO
resulted in the conservative reclassification of five assemblies loaded in four MPCs as damaged
fuel (ADAMS Accession No. ML052510724). The licensee concluded that UT data could not
reasonably be used to size the identified failures. Therefore, the licensee submitted an
exemption request from the requirements of 10 CFR 72.212(a)(2) and 10 CFR 72.214, which
included revised safety analyses assuming up to two damaged fuel pins, each in a separate fuel
assembly. In a separate event in 2014, ANO conservatively reclassified an assembly as
damaged following a noble fission gas release (Kr-85) during FHD drying of a loaded MPC
(ADAMS Accession Nos. ML16021A485, ML14286A037). The licensee cited the prevalence of
GTRF in the operating cycles for the subject assemblies and the lower reliability of UT relative
to other fuel qualification test methods as the most likely cause of the event. As a corrective
action, the licensee revised operating procedures to avoid the use of UT for future fuel
classification. The licensee for Calvert Cliffs has also chosen to rely on VCS for fuel
classification activities in the interest of potentially identifying any legacy fuel that may be
vulnerable to releases.
DISCUSSION
Licensees that experience noble fission gas releases during spent fuel cask loading operations
may determine follow-up actions based on a review of fuel selection records, results from
root-cause or apparent-cause analyses, or other relevant operating experience. A licensee may
evaluate whether the design-bases fuel temperature limits were exceeded or whether the fuel
was inadvertently exposed to oxidizing species that compromised cladding integrity. The
guidance in NUREG-1536, Revision 1, states that if fuel oxidation occurred, it may lead to a
configuration not adequately analyzed for radiation dose rates or criticality safety. Additionally, the guidance further states that the release of fuel fines or grain-sized powder into the inner
cask environment from ruptured fuel may be a condition outside of the approved design bases.
The NRC staff recognizes that no fuel qualification test method is 100 percent accurate and that
quantifying reliability is difficult because of the low failure rate of modern fuel (about
0.001 percent). Nevertheless, a licensees evaluation of operating experience may identify
limitations of a given technique, and appropriate actions consistent with the licensees' approved
site procedures and QA program are recommended. Such actions may include revising
operating procedures to limit the use of certain techniques, depending on the type of fuel or
sensitivity limits of the instrumentation, as well as assessing the need for secondary characterization. The staff discusses fuel qualification testing, inspection method limitations, and staff considerations in the Background section of this IN.
Releases of detectable gases, such as Kr-85, may also be an indication of a substantive release
of tritium, which is not readily detectable by plant radiation monitoring instruments or routinely
used portable survey instruments. The release of this gas could have implications for
occupational workers, as well as members of the public. Regulations in 10 CFR 20 Subpart C
require summing of internal and external doses. Regulations in 10 CFR 20 Subpart D require
monitoring and control of gaseous effluents. Regulations in 10 CFR 20 Subpart F require
performance of adequate surveys. Fuel bundles containing burnable boron poison may contain
higher quantities of tritium than bundles not containing boron poisons. Since personal
dosimetry devices may not respond to gases such as tritium, the need for bioassay of workers
involved with these transients may be evaluated by the licensee at the time of the event.
CONTACT
This IN requires no specific action or written response. Please direct any questions about this
matter to the technical contact listed below or to the appropriate Office of Nuclear Reactor
Regulation or Office of New Reactors project manager.
/ra/ /ra/
Michael C. Layton, Director Christopher G. Miller, Director
Division of Spent Fuel Management Division of Inspector and Regional Support
Office of Nuclear Material Safety Office of Nuclear Reactor Regulation
and Safeguards
/ra/
Timothy J. McGinty, Director
Division of Construction Inspection
and Operational Programs
Office of New Reactors
Technical Contact:
Ricardo Torres, NMSS
301-415-7508 E-mail: ricardo.torres@nrc.gov
Note: NRC generic communications may be found on the NRC public Web site, http://www.nrc.gov, under NRC Library/Document Collections. NRC INFORMATION NOTICE 2018-01, NOBLE FISSION GAS RELEASES DURING SPENT
FUEL LOADING OPERATIONS, DATE: February 21, 2018 ADAMS Accession No.: ML17234A705 CAC No. MG0051 OFFICE QTE NMSS/DFSM/RMB NRO/DSEA/RPAC/BC NRR/DSS/D NMSS/DFSM/RMB/BC
NAME CHsu RTorres LBurkhart MGavrilas MRahimi
DATE 01/23/2017 08/15/2017 09/11/2017 10/05/2017 10/13/2017 OFFICE NRR/DIRS/IRGB/PM NRR/DIRS/IRGB /LA NRR/DIRS/IRGB/BC NRO/DCIP/D NMSS/DFSM/D
NAME TGovan ELee HChernoff TMcGinty MLayton
DATE 10/18/2017 10/30/2017 02/01/2018 02/06/2018 02/08/2018 OFFICE NRR/DIRS/D
NAME CMiller
DATE 02/21/2018 OFFICIAL USE ONLY