ML062840075

Technical Specification Pages - Issuance of Amendment #210 Core Operating Limits Report

ML062840075
Person / Time
Site:	Waterford
Issue date:	10/06/2006
From:	Fields M B NRC/NRR/ADRO/DORL/LPLIV
To:
Fields M B, NRR/DORL/LP4, 415-3062
Shared Package
ML062790016	List: ML061930421 ML062840075
References
TAC MC8767
Download: ML062840075 (2)

Text

-4-or indirectly any control over (i) the facility, (ii) power or energy produced by the facility, or (iii) the licensees of the facility.

Further, any rights acquired under this .authorization may be exercised only in compliance with and subject to the requirements and restrictions of this operating license, the A 'tomic Energy Act of 1954, as amended, and the NRC's regulations.

For purposes of this condition, the limitations of 10 CER 50.81, as now in effect and as~they may be subse 'quently amended, are fully applicable to the equity investors and any successors in interest to the equity investors, as long as the license for the facility remains in effect.(b) Entergy Louisiana, LLC (or its designee) to notify the NRC in writing prior to any change in (i) the terms or conditions.

of any lease agreements executed as part of the above authorized financial transactions, (ii) any facility operating agreement involving a licensee that is in effect now or will be in effect in the future, or (iii) the existing property insurance coverages for the facility, that would materially alter the representations and conditions, set forth in the staff's Safety Evaluation enclosed to the NRC letter dated September 18, 1989. In*addition, Entergy Louisiana, LLC or its designee is required to notify the NRC of any action by equity investors or successors in interest to Entergy Louisiana, LLC that may have an effect on the operation of the facility.C. This license shall be deemed to contain and is subject to the conditions specified in the Commission's regulations set forth in 10 CFR Chapter 1 and is subject to all applicable provisions of the Act and to the rules, regulations and orders of the Commission now or hereafter in effect; and is subject to the additional conditions specified or incorporated below: 1. Maximum Power Level EQI is authorized to operate the facility at reactor core power levels *not in excess of 371.6 megawatts thermal (100% power) in accordance with the conditions specified herein.2. Technical Specifications and Environmental Protection Plan The Technical Specifications contained in Appendix A, as revised through Amendment No.210, and the Environmental Protection Plan contained in App'endix B, are hereby incorporated in the license. EQI shall operate the facility in accordance with the Technical Specifications and the Environmental Protection'Plan.

AMENDMENT NO. 210 ADMINISTRATIVE CONTROLS C ORE OPERATING LIMITS REPORT COLR (Continued)

6) "CESEC -Digital Simulation for a Combustion Engineering Nuclear Steam Supply System," (CE letter LD-82-001 and NRC SE to CE dated April 3, 1984). (Methodology for Specification 3.1.1.1 and 3.1.1.2 for Shutdown Margins, 3.1.1.3 for MTC, 3.1.3.1 for Movable Control Assemblies

-CEA Position, 3.1.3.6 for Regulating and group P CEA Insertion Limits, and 3.2.3 for Azimuthal Power Tilt).7) "Qualification of Reactor Physics Methods for the Pressurized Water Reactors of the Entergy System," ENEAD-01-P. (Methodology for Specifications 3.1.1.1 and 3.1.1.2 for Shutdown Margins, 3.1.1.3 for MTC, 3.1.3.6 for Regulating and group P CEA Insertion Limits, 3.1.2.9 Boron Dilution (Calculation of CBC & IB3W), and 3.9.1 Boron Concentration).

8) "Fuel Rod Maximum Allowable Gas Pressure," CEN-372-P-A. (Methodology for Specification 3.2.1, Linear Heat Rate).9) "Technical Description Manual for the CENTS Code," WCAP-1 5996-P-A. (Methodology for Specification 3.1.1.1 and 3.1 .1.2 for Shutdown Margins, 3.1.1.3 for MTC, 3.1.3.1 for Movable Control Assemblies

-CEA Pos 'ition, 3.1.3.6 for Regulating and group P CEA Insertion Limits, and 3.2.3 for Azimuthal Power Tilt).10) "Calculative Methods for the CE Nuclear Power Large Break LOCA Evaluation Model," CENPD-132, Supplement 4-P-A. (Methodology for Specification 3.1.1.3 for MTC, 3.2.1 for Linear Heat Rate, 3.2.3 for Azimuthal Power Tilt and 3.2.7 for ASI).11) "Implementation of ZIRLO, Material Cladding in CE Nuclear Power Fuel Assembly Designs," CENPD-404-P-A (Methodology for Specification 3.1.1.3 for MTC, 3.2.1 for Linear Heat Rate, 3.2.3 for Azimuthal Power Tilt, and 3.2.7 for ASI).12) "Qualification of the PHOENIX-P/ANC Nuclear Design System For Pressurized Water Reactor Cores," WCAP-1 1596-P-A;, "ANC: A Westinghouse Advanced Nodal Computer Code," WCAP-1 0965-P-A; and "ANC: A Westinghouse Advanced Nodal Computer Code: Enhancements to ANC Rod Power Recovery," WCAP-1 0965-P-A Addendum 1.(Methodology for Specifications 3.1.1.1 and 3.1.1.2 for Shutdown Margins, 3.1.1.3 for MTC,.3.1.3.6 for Regulating and group P CEA Insertion Limits, 3.1.2.9 Boron Dilution (Calculation of CBC & IBW), and 3.9.1 Boron Concentration).

13) "Qualification of the Two-Dimensional Transport Code PARAGON," WCAP-16045-P-A (Methodology for Specifications 3.1.1.1 and 3.11.1.2 for Shutdown Margins, 3.1.1.3 for MTC, 3.1.3.6 for Regulating and group P CEA Insertion Limits, 3.1.2.9 Boron Dilution' (Calculation of CBC & IBW), and 3.9.1.Boron Concentration).

14) "Implementation of Zirconium Diboride Burnable Absorber Coatings in CE Nuclear Power Fuel Assembly Designs," WCAP-1 6072-P-A (Methodology for Specification 3.1.1.3 for MTC, 3.2.1 for Linear Heat Rate, 3.2.3 for Azimuthal Power Tilt, and 3.2.7 for ASI).6.9.1.11.2 The core operating limits shall be determined such that all applicable limits (e.g., fuel thermal limits, core thermal-hydraulic limits, ECCS limits, nuclear limits such as shutdown margin, and transient and accident analysis limits) of the safety analysis are met.6.9.1.11.3 The CORE OPERATING LIMITS REPORT, including any mid-cycle revisions or supplements thereto, shall be provided upon issuance, for each reload cycle, to the NRC Document Control Desk with copies to the Regional Administrator and Resident Inspector.

AMENDMENT NO. 492ý 446,458, WATERFORD

-UNIT 3 6-20a .+82, !88, !9!, q199, 200, 210