|
|
Line 42: |
Line 42: |
| 5.6.1 Deleted. | | 5.6.1 Deleted. |
| 5.6.2 Annual Radiological Environmental Operating Report | | 5.6.2 Annual Radiological Environmental Operating Report |
| - ---
| |
| _,_--.-_---_-__- ea x I ~rn I __._ .: . ._ . _. . _ . .. | | _,_--.-_---_-__- ea x I ~rn I __._ .: . ._ . _. . _ . .. |
| A single submittal may be made for a multiple unit station. The submittal should combine sections common to all units at the station. | | A single submittal may be made for a multiple unit station. The submittal should combine sections common to all units at the station. |
Letter Sequence Other |
---|
TAC:MC3911, Changes to Section 5.0, Administrative Controls, Removal of Monthly Operating Report and Occupational Radiation Exposure Report (Open) TAC:MC3912, Changes to Section 5.0, Administrative Controls, Removal of Monthly Operating Report and Occupational Radiation Exposure Report (Open) |
|
|
Similar Documents at Hatch |
---|
Category:Technical Specifications
MONTHYEARML24069A0012024-03-0909 March 2024 – Correction of Amendment No. 266 Regarding License Amendment Request Regarding Relocation of Specific Surveillance Frequencies to a Licensee-Controlled Program (TSTF-425, Revision 3) NL-24-0089, Correction of Technical Specification Omission2024-03-0909 March 2024 Correction of Technical Specification Omission ML22346A1482023-02-0909 February 2023 Issuance of Amendments 320 and 265, Regarding LAR to Revise Technical Specifications to Adopt TSTF-208 and Administrative Correction for Duplicate Technical Specifications 3.4.10 ML23018A0042023-01-24024 January 2023 Correction of Amendment Nos. 319 and 264 Regarding Revision to Technical Specifications to Adopt Risk-Informed Completion Times TSTF-505, Revision 2, Provide Risk-Informed Extended Completion Times RITSTF ML22192A1992022-08-19019 August 2022 Issuance of Amendments Nos. 316 and 261, Regarding Request to Adopt TSTF-580, Provide Exception from Entering Mode 4 with No Operable RHR Shutdown Cooling ML22101A0942022-05-20020 May 2022 Issuance of Amendments Nos. 315 and 260, Regarding Request to Eliminate Automatic Main Steam Line Isolation on High Turbine Building Area Temperature NL-22-0335, Supplement to Application to Revise Technical Specifications to Adopt Technical Specifications Task Force (TSTF) Traveler TSTF-208, Revision 0, Extension of Time to Reach Mode 2 in LCO 3.0.3 And.2022-05-17017 May 2022 Supplement to Application to Revise Technical Specifications to Adopt Technical Specifications Task Force (TSTF) Traveler TSTF-208, Revision 0, Extension of Time to Reach Mode 2 in LCO 3.0.3 And. ML21349A5182022-02-0202 February 2022 Issuance of Amendments Regarding Revision to Technical Specifications to Adopt TSTF-554, Revise RCS Leakage ML21270A0862021-11-18018 November 2021 Issuance of Amendments Regarding Revision to Technical Specifications 5.7, High Radiation, Administrative Controls NL-21-0385, Application to Revise Technical Specifications to Adopt TSTF-554, Revise Reactor Coolant Leakage Requirements2021-09-29029 September 2021 Application to Revise Technical Specifications to Adopt TSTF-554, Revise Reactor Coolant Leakage Requirements ML21109A3592021-04-22022 April 2021 Issuance of Amendment No. 254, Regarding Revision to Technical Specifications for One-Time Extension of Completion Times Related to Residual Heat Removal System (Emergency Circumstances) ML20303A1812020-09-29029 September 2020 Rev. 117 to Technical Requirement Manual, Unit 1, Part 2 NL-20-1000, Responses to NRC Requests for Additional Information to License Amendment Request to Revise the Required Actions of Technical Specifications 3.8.1, AC Sources - Operating, for One-Time Extension of Completion Time2020-08-23023 August 2020 Responses to NRC Requests for Additional Information to License Amendment Request to Revise the Required Actions of Technical Specifications 3.8.1, AC Sources - Operating, for One-Time Extension of Completion Time NL-20-0793, Correction of Technical Specification Typographical Error2020-07-0202 July 2020 Correction of Technical Specification Typographical Error ML20066F5922020-06-11011 June 2020 Issuance of Amendments Nos. 304 and 249, Regarding License Amendment Request to Adopt NFPA-805 Performance Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants (2001 Edition) ML19337C3222020-01-29029 January 2020 Issuance of Amendments Revision to Technical Specifications to Adopt TSTF-563 ML19212A0542019-09-20020 September 2019 Issuance of Amendments 299 and 244 Regarding Revision to Technical Specifications to Adopt Tstf-564, Safety Limit (Minimum Critical Power Ratio) MCPR ML19198A1042019-09-0404 September 2019 Issuance of Amendments Regarding Revision to Technical Specification 3.6.4.1 - Secondary Containment ML19164A0172019-06-21021 June 2019 Correction of Amendment No. 223 Multiple Technical Specification Changes (CAC Nos. MF5026 and MF5027) ML19091A2912019-04-30030 April 2019 Issuance of Amendments 296 and 241 to Revise Technical Specifications 3.6.2.5, Condition C, Residual Heat Removal Drywell Spray End State ML18222A2962018-08-29029 August 2018 Issuance of Amendments to Revise Technical Specification 3.7.7, ECCS - Operating (CAC Nos. MF9997 and MF9998; EPID L-2017-LLA-0263) NL-16-1617, Request for Addition of Surveillance Requirements Note for LCO 3.7.7 (NL-16-1617)2017-07-10010 July 2017 Request for Addition of Surveillance Requirements Note for LCO 3.7.7 (NL-16-1617) NL-17-0810, Transmittal of Marked-Up and Clean Technical Specifications Pages for Section 5.5.15 for HNP Implementation of TSTF-500, DC Electrical Rewrite.2017-05-11011 May 2017 Transmittal of Marked-Up and Clean Technical Specifications Pages for Section 5.5.15 for HNP Implementation of TSTF-500, DC Electrical Rewrite. NL-17-0841, Correction of Technical Specification Typographical Error2017-05-10010 May 2017 Correction of Technical Specification Typographical Error ML17076A4342017-03-23023 March 2017 TSTF-542 Marked-Up Technical Specifications and Bases for Hatch Nuclear Plant NL-16-2013, Transmittal of Revised Technical Specification Pages2016-10-26026 October 2016 Transmittal of Revised Technical Specification Pages NL-16-1564, Revised Technical Specifications Pages for Technical Specifications Revision Request to Implement TSTF-500, DC Electrical Re-Write.2016-09-20020 September 2016 Revised Technical Specifications Pages for Technical Specifications Revision Request to Implement TSTF-500, DC Electrical Re-Write. NL-16-1571, Supplemental Response Regarding Request to Adopt TSTF-222, Control Rod Scram Times2016-08-26026 August 2016 Supplemental Response Regarding Request to Adopt TSTF-222, Control Rod Scram Times ML16090A1742016-04-14014 April 2016 Issuance of Amendments Regarding Managing Gas Accumulation ML16062A0992016-03-23023 March 2016 Issuance of Amendments Regarding the Relocation of the Pressure Temperature Limit Curves Following TSTF-419 NL-15-1956, Adoption of TSTF-65-A, Rev. 1, Use of Generic Titles for Utility Positions2016-03-14014 March 2016 Adoption of TSTF-65-A, Rev. 1, Use of Generic Titles for Utility Positions ML16043A1012016-03-0707 March 2016 Edwin I Hatch Nuclear Plant, Unit Nos. 1 and 2, Issuance of Amendments Regarding Typographical Errors in the Facility Operating License and Technical Specifications (CAC Nos. MF6580 and MF6581) ML15342A3982016-01-29029 January 2016 Issuance of Amendment Regarding Minimum Critical Power Ratio NL-14-1075, Technical Specifications. Part 4 of 42015-12-15015 December 2015 Technical Specifications. Part 4 of 4 NL-14-1075, E.I. Hatch, Units 1 and 2 - Technical Specifications. Part 3 of 42015-12-15015 December 2015 E.I. Hatch, Units 1 and 2 - Technical Specifications. Part 3 of 4 ML15350A4112015-12-15015 December 2015 Technical Specifications. Part 3 of 4 ML15350A4102015-12-15015 December 2015 Technical Specifications. Part 2 of 4 ML15350A4092015-12-15015 December 2015 License Amendment Request for Adoption of TSTF-423-A, Rev. 1, Technical Specification End States, NEDC-32988-A, Using the Consolidated Line Item Improvement Process. Part 1 of 4 NL-14-1075, E.I. Hatch, Units 1 and 2 - Technical Specifications. Part 2 of 42015-12-15015 December 2015 E.I. Hatch, Units 1 and 2 - Technical Specifications. Part 2 of 4 NL-15-1881, Revised Technical Specification Page for Primary Containment Isolation Instrumentation2015-10-15015 October 2015 Revised Technical Specification Page for Primary Containment Isolation Instrumentation NL-15-1535, GNF-002N9964-R1-NP, Gnf Additional Information Regarding the Requested Changes to the Technical Specification SLMCPR - Hatch 1 Cycle 282015-08-31031 August 2015 GNF-002N9964-R1-NP, Gnf Additional Information Regarding the Requested Changes to the Technical Specification SLMCPR - Hatch 1 Cycle 28 NL-15-0407, Request to Revise Typographical Error in Unit 1 Operating License and in Unit 2 Technical Specifications, and to Add Staggered Test Basis to Unit 1 and Unit 2 Technical Specifications2015-08-0404 August 2015 Request to Revise Typographical Error in Unit 1 Operating License and in Unit 2 Technical Specifications, and to Add Staggered Test Basis to Unit 1 and Unit 2 Technical Specifications ML15180A3342015-08-0303 August 2015 Issuance of Amendments ML15054A4002015-02-24024 February 2015 (HNP-2), Correction for Amendments Regarding Reactor Core Safety Limits ML14349A7152014-12-23023 December 2014 Edwin I Hatch Nuclear Plant, Unit Nos. 1 and 2, Issuance of Amendments Regarding a Critical Instrumentation Bus ML14328A3232014-12-16016 December 2014 Edwin I Hatch Nuclear Plant, Unit Nos. 1 and 2, Issuance of Amendments for Degraded Voltage Protection Modification Schedule ML14279A2612014-12-10010 December 2014 Issuance of Amendments Regarding the Control Room Air Conditioning System ML14147A4102014-08-29029 August 2014 Issuance of Amendments Regarding Control Room Habitability NL-13-1751, Application to Revise Tech Specs to Adopt TSTF-535, Revise Shutdown Margin Definition to Address Advanced Fuel Designs.2014-03-17017 March 2014 Application to Revise Tech Specs to Adopt TSTF-535, Revise Shutdown Margin Definition to Address Advanced Fuel Designs. NL-12-1078, Edwin I. Hatch, Units 1 and 2, License Amendment Request to Revise the Minimum Water Level in the Plant Service Water Pump Well2012-07-0505 July 2012 Edwin I. Hatch, Units 1 and 2, License Amendment Request to Revise the Minimum Water Level in the Plant Service Water Pump Well 2024-03-09
[Table view] |
Text
Reporting Requirements 5.6 5.0 ADMINISTRATIVE CONTROLS 5.6 Reporting Requirements The following reports shall be submitted in accordance with 10 CFR 50.4.
5.6.1 Deleted.
5.6.2 Annual Radiological Environmental Operating Report
~--------NOTE- ---- a Asingle submittal may be made for a multiple unit station. The submittal should combine sections common to all units at the station.
The Annual Radiological Envirpnmental Operating Report covering the operation of the unit during the previous calendar year shall be submitted by May 15 of each year. The report shall include summaries, Interpretations, and analyses of trends of the results of the Radiological Environmental Monitoring Program for the reporting period. The material provided shall be consistent with the objectives outlined In the Offsite Dose Calculation Manual (ODCM), and In 10 CFR 50, Appendix 1,Sections IV.B.2, IV.B.3, and IV.C.
The Annual Radiological Environmental Operating Report shall Include the results of analyses of all radiological environmental samples and of all environmental radiation measurements taken during the period pursuant to the locations specified in the table and figures in the ODCM, as well as summarized and tabulated results of these analyses and measurements In the (continued)
HATCH UNIT 1 5.0-1 8 Amendment No. 245
Reporting Requirements 5.6 5.6 Reporting Requirements 5.6.2 Annual Radiological Environmental Onerating Report (continued) format of the table in the Radiological Assessment Branch Technical Position, Revision 1, November 1979. In the event that some individual results are not available for inclusion with the report, the report shall be submitted noting and explaining the reasons for the missing results. The missing data shall be submitted In a supplementary report as soon as possible.
5.6.3 Radioactive Effluent Release Report A single submittal may be made for a multiple unit station. The submittal should combine sections common to all units at the station; however, for units with separate radwaste systems, the submittal shall specify the releases of radioactive material from each unit.
The Radioactive Effluent Release Report covering the operation of the unit shall be submitted In accordance with 10 CFR 50.36a. The report shall Include a summary of the quantities of radioactive liquid and gaseous effluents and solid waste released from the unit. The material provided shall be consistent with the objectives outlined In the ODOM and the Process Control Program and In conformance with 10 CFR 50.36a and 10 CFR 50, Appendix 1,Section IV.B.1.
5.6.4 Deleted.
5.6.5 CORE OPERATING LIMITS REPORT (COLR)
- a. Core operating limits shall be established prior to each reload cycle, or prior to any remaining portion of a reload cycle, and shall be documented In the COLR for the following:
- 1) The Average Planar Linear Heat Generation Rate for Specification 3.2.1.
- 2) The Minimum Critical Power Ratio for Specification 3.2.2.
- 3) The Linear Heat Generation Rate for Specification 3.2.3.
(continued)
HATCH UNIT 1 5.0-1 9 Amendment No. 245
Reporting Requirements 5.6 5.0 ADMINISTRATIVE CONTROLS 5.6 Reporting Requirements The following reports shall be submitted in accordance with 10 CFR 50.4.
5.6.1 Deleted.
5.6.2 Annual Radiological Environmental Operating Report
_,_--.-_---_-__- ea x I ~rn I __._ .: . ._ . _. . _ . ..
A single submittal may be made for a multiple unit station. The submittal should combine sections common to all units at the station.
The Annual Radiological Environmental Operating Report covering the operation of the unit during the previous calendar year shall be submitted by May 15 of each year. The report shall Include summaries, Interpretations, and analyses of trends of the results of the Radiological Environmental Monitoring Program for the reporting period. The material provided shall be consistent with the objectives outlined In the Offsite Dose Calculation Manual (ODCM), and In 10 CFR 50:Appendix 1,Sections IV.B.2, IV.B.3, and IV.C.
The Annual Radiological Environmental Operating Report shall Include the results of analyses of all radiological environmental samples and of all environmental radiation measurements taken during the period pursuant to the locations specified In the table and figures Inthe ODCM, as well as summarized and tabulated results of these analyses and measurements In the format of the (continued)
~~ ~UNT .8AedetN. 18 HATCH~~~
~
HATCH UNIT 2 5.0-18 Amendment No. 189
Repbrting Requirements 5.6 5.6 Reporting Requirements 5.6.2 Annual Radiological Environmental Oneratina Report (continued) table In the Radiological Assessment Branch Technical Position, Revision 1, November 1979. In the event that some individual results are not available for inclusion with the report, the report shall be submitted noting and explaining the reasons for the missing results. The missing data shall be submitted in a supplementary report as soon as possible.
5.6.3 Radioactive Effluent Release Report A single submittal may be made for a multiple unit station. The submittal should combine sections common to all units at the station; however, for units with separate radwaste systems, the submittal shall specify the releases of radioactive material from each unit.
The Radioactive Effluent Release Report covering the operation of the unit shall be submitted In accordance with 10 CFR 50.36a. The report shall Include a summary of the quantities of radioactive liquid and gaseous effluents and solid waste released from the unit. The material provided shall be consistent with the objectives outlined in the ODOM and the Process Control Program and In conformance with 10 CFR 50.36a and 10 CFR 50, Appendix I, Section IV.B.1.
5.6.4 Deleted.
5.6.5 CORE OPERATING LIMITS REPORT (COLR)
- a. Core operating limits shall be established prior to each reload cycle, or prior to any remaining portion of a reload cycle, and shall be documented In the COLR for the following:
- 1) The Average Planar Linear Heat Generation Rate for Specification 3.2.1.
- 2) The Minimum Critical Power Ratio for Specification 3.2.2.
- 3) The Linear Heat Generation Rate for Specification 3.2.3.
(continued)
HATC UNI 2 .0-1 Amedmet No 18 HATCH UNIT 2 5.0-1i9 Amendment No. 189