ML102560006: Difference between revisions
Jump to navigation
Jump to search
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| author name = Hufnagel J | | author name = Hufnagel J | ||
| author affiliation = Exelon Corp | | author affiliation = Exelon Corp | ||
| addressee name = Brady B | | addressee name = Brady B | ||
| addressee affiliation = NRC/NRR/DLR/RPB1 | | addressee affiliation = NRC/NRR/DLR/RPB1 | ||
| docket = 05000354 | | docket = 05000354 | ||
| Line 15: | Line 15: | ||
=Text= | =Text= | ||
{{#Wiki_filter:Brady, Bennett From: john.hufnagel@exeloncorp.com Sent: Thursday, September 09, 2010 11:53 AM To: Brady, Bennett Cc: donald.warfel@exeloncorp.com; Peter.Tamburro@exeloncorp.com; Paul.Cervenka@exeloncorp.com | {{#Wiki_filter:Brady, Bennett From: john.hufnagel@exeloncorp.com Sent: Thursday, September 09, 2010 11:53 AM To: Brady, Bennett Cc: donald.warfel@exeloncorp.com; Peter.Tamburro@exeloncorp.com; Paul.Cervenka@exeloncorp.com | ||
==Subject:== | ==Subject:== | ||
Follow-up from yesterday's chat with Albert Wong and Ginesh Bennett, We have done a review and confirmed that there have been no repairs to the Main Steam Flow Element CASS material over the course of Hope Creek plant operation. | Follow-up from yesterday's chat with Albert Wong and Ginesh | ||
Therefore, as discussed yesterday, and per BWRVIP-75A, stress corrosion cracking should not be a concern.With regard to the secondary question on ferrite content, it appears that some of the MS flow elements contain CASS material with ferrite at the higher end of the range, but the CASS section (upstream half of the flow element) is welded to the downstream carbon steel section (half) which is then welded to the carbon steel pressure boundary piping. The upstream end of the CASS section is free to move, thus minimizing any stresses on the component. | : Bennett, We have done a review and confirmed that there have been no repairs to the Main Steam Flow Element CASS material over the course of Hope Creek plant operation. Therefore, as discussed yesterday, and per BWRVIP-75A, stress corrosion cracking should not be a concern. | ||
This configuration explains the statement in the RAI 3.4.2.4-01 response that there is no tensile stress in the CASS portion of the nozzle to promote stress corrosion cracking, in that only one end of the component is attached (to the downstream carbon steel section). | With regard to the secondary question on ferrite content, it appears that some of the MS flow elements contain CASS material with ferrite at the higher end of the range, but the CASS section (upstream half of the flow element) is welded to the downstream carbon steel section (half) which is then welded to the carbon steel pressure boundary piping. The upstream end of the CASS section is free to move, thus minimizing any stresses on the component. This configuration explains the statement in the RAI 3.4.2.4-01 response that there is no tensile stress in the CASS portion of the nozzle to promote stress corrosion cracking, in that only one end of the component is attached (to the downstream carbon steel section). The upstream end is free to move, thus preventing tensile stresses. | ||
The upstream end is free to move, thus preventing tensile stresses.Hopefully this provides the information needed to confirm the adequacy of this item. Please let me know. Thanks, Bennett.-John.************************************************** | Hopefully this provides the information needed to confirm the adequacy of this item. Please let me know. Thanks, Bennett. | ||
This e-mail and any of its attachments may contain Exelon Corporation proprietary information, which is privileged, confidential, or subject to copyright belonging to the Exelon Corporation family of Companies. | - John. | ||
This e-mail is intended solely for the use of the individual or entity to which it is addressed. | ************************************************** This e-mail and any of its attachments may contain Exelon Corporation proprietary information, which is privileged, confidential, or subject to copyright belonging to the Exelon Corporation family of Companies. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. Thank You. ************************* | ||
If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. | |||
If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. | |||
Thank You. ************************* | |||
1}} | 1}} | ||
Latest revision as of 13:22, 13 November 2019
| ML102560006 | |
| Person / Time | |
|---|---|
| Site: | Hope Creek  |
| Issue date: | 09/09/2010 |
| From: | Hufnagel J Exelon Corp |
| To: | Bennett Brady License Renewal Projects Branch 1 |
| References | |
| Download: ML102560006 (1) | |
Text
Brady, Bennett From: john.hufnagel@exeloncorp.com Sent: Thursday, September 09, 2010 11:53 AM To: Brady, Bennett Cc: donald.warfel@exeloncorp.com; Peter.Tamburro@exeloncorp.com; Paul.Cervenka@exeloncorp.com
Subject:
Follow-up from yesterday's chat with Albert Wong and Ginesh
- Bennett, We have done a review and confirmed that there have been no repairs to the Main Steam Flow Element CASS material over the course of Hope Creek plant operation. Therefore, as discussed yesterday, and per BWRVIP-75A, stress corrosion cracking should not be a concern.
With regard to the secondary question on ferrite content, it appears that some of the MS flow elements contain CASS material with ferrite at the higher end of the range, but the CASS section (upstream half of the flow element) is welded to the downstream carbon steel section (half) which is then welded to the carbon steel pressure boundary piping. The upstream end of the CASS section is free to move, thus minimizing any stresses on the component. This configuration explains the statement in the RAI 3.4.2.4-01 response that there is no tensile stress in the CASS portion of the nozzle to promote stress corrosion cracking, in that only one end of the component is attached (to the downstream carbon steel section). The upstream end is free to move, thus preventing tensile stresses.
Hopefully this provides the information needed to confirm the adequacy of this item. Please let me know. Thanks, Bennett.
- John.
- This e-mail and any of its attachments may contain Exelon Corporation proprietary information, which is privileged, confidential, or subject to copyright belonging to the Exelon Corporation family of Companies. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. Thank You. *************************
1