| | Q | CCA | Title |
|---|
| 05000275/FIN-2013002-01 | 2013Q1 | H.8 | Failure to Provide Adequate Guidance to Address General Welding Standard Requirements |
| 05000275/FIN-2013002-02 | 2013Q1 | | Failure to Identify Existing Indications During Prior Ultrasonic Examinations of Pressurizer Structural Weld Overlays |
| 05000275/FIN-2013002-03 | 2013Q1 | H.14 | Failure to Effectively Evaluate Design Change for High Voltage Bushing |
| 05000275/FIN-2013003-01 | 2013Q2 | H.2 | Failure to Effectively Implement the Fire Protection Program |
| 05000275/FIN-2013004-01 | 2013Q3 | H.12 | The failure to use procedures to perform corrective maintenance
on an emergency diesel generator |
| 05000275/FIN-2013004-02 | 2013Q3 | H.12 | Valid EDG 2-1 start Signal Caused by a Loss of 4 kV Class 1E Bus G |
| 05000275/FIN-2013007-01 | 2013Q3 | P.2 | Failure to Evaluate the Effects on the Emergency Diesel Generator Load Capability for Maximum Combustion Air Temperature Conditions |
| 05000275/FIN-2013007-02 | 2013Q3 | | Failure to Evaluate the Auxiliary Feedwater Pump Motor Capability for the Effects of Pump Maximum Brake Horsepower Conditions |
| 05000275/FIN-2013007-03 | 2013Q3 | H.1 | Inadequate Procedures for Establishing Temporary Ventilation |
| 05000323/FIN-2013005-02 | 2013Q4 | H.14 | Reactor Trip due to a Lightning Arrester Flashover |
| 05000275/FIN-2013005-03 | 2013Q4 | H.5 | Auxiliary Feedwater Actuation Due to a Main Feedwater Pump Trip |
| 05000275/FIN-2013005-04 | 2013Q4 | H.7 | Loss of Control Room Ventilation System due to Inadequate Design Control |
| 05000275/FIN-2013201-01 | 2013Q4 | H.12 | Security |
| 05000275/FIN-2013005-01 | 2013Q4 | | Procedures for Recommending Protective Actions for Members of the Public on the Pacific Ocean |
