Latest revision as of 02:33, 5 February 2020

Text

Texas A&M University - Supplement 4 to License Amendment Request Dated October 14, 2015
	ML16132A516
Person / Time
Site:	05000128
Issue date:	05/11/2016
From:	Mcdeavitt S; Texas A&M Univ
To:	Alexander Adams, Patrick Boyle; Document Control Desk, Office of Nuclear Reactor Regulation
References
	2016-0026
	Download: ML16132A516 (14)
	v • d • e

NUCLEAR SCIENCE CENTER Dr. Sean M. McDeavitt Director, TEES Nuclear Science Center Texas A&M University Texas A&M Engineering Experiment Station 1095 Nuclear Science Road, 3575 TAMU College Station, TX 77843-3575 May 11, 2016 2016-0026 Docket Number 50-128 / License No. R-83 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington DC 20555 Ref: 10 CFR 50.90

SUBJECT:

Supplement 4 to License Amendment Request dated October 14, 2015, Facility License R-83, Docket Number 50-128. (ADAMS Accession No. ML15287A148)

Attn: Mr. Alexander Adams, Jr., Chief Research and Test Reactors Branch Office of Nuclear Reactor Regulation Mr. Patrick Boyle, Project Manager Research and Test Reactors Branch Office of Nuclear Reactor Regulation The purpose of this letter is to address the following 2 issues associated with the October 14, 2015 (ADAMS Accession No. ML15287A148), license amendment request and associated supplements for the Texas A&M Engineering Experiment Station (TEES) Nuclear Science Center (NSC) TRIGA reactor, Facility Operating License No. R-83, Docket Number 50-128:

1. Proposed License Conditions

2. Correction of pagination for Section 1 of the NSC proposed Technical Specifications (TSs) changes Issue 1: Proposed License Conditions TEES is revising the proposed license condition contained in our letter dated March 3, 2016, (ADAMS Accession No. ML16063A264) associated with allowing the storage of fuel and special nuclear material from the Texas A&M AGN-201M reactor at the NSC site. On March 3, 2016, TEES proposed new license conditions concerning 10 CFR Parts 30 and 70 which were not in Nuclear Science Center 1095 Nuclear Science Road, 3575 TAMU College Station, TX 77843-3575 1 Tel. (979) 845-7551

appropriate standard format. For consistency TEES is proposing new license conditions which are in standard formatted license conditions concerning 10 CFR Parts 30 and 70 of the license. contains the new proposed license page.

Issue 2: Correction of pagination In our letter of November 18, 2015 (ADAMS Accession No. ML15322A354), TEES proposed changes to Section 1 of the NSC TSs that included definitions associated with the AGN-201 M reactor fuel and neutron startup source. Upon further review of our submittal we found that the proposed TS pages were incorrectly paginated . We have repaginated all the TS pages in Section 1 of the NSC TSs to correctly include the proposed TS changes from the November 18, 2015, letter. contains the revised NSC Section 1 of the TSs pages. Our recommendation is to issue the entire new proposed Section 1 of the NSC TSs with the license amendment to ensure accuracy of the TSs.

Should you have any questions regarding the information provided in this submittal, please contact me or Mr. Jerry Newhouse at (979) 845-7551 or via email at mcdeavitt@tamu.edu or newhouse@tamu.edu.

Oath of Affirmation I declare under penalty of perjury that the foregoing is true and correct to the best of my knowledge.

Sean M. McDeavitt, PhD.

Director, TEES Nuclear Science Center

Enclosures:

1 Proposed License Changes 2 Repaginated Section 1 Technical Specification Pages CC: next page Nuclear Science Center 1095 Nucl ear Science Road, 3575 TAMU College Station, TX 77843-3575 2 Tel. (979) 845-7551

cc: Mayor, City of College Station P.O. Box Drawer 9960 Mr. William Dean, Office Director College Station, TX 77840-3575 United States Nuclear Reactor Commission Office of Nuclear Reactor Regulation Governors Budget and Policy Office P.O. Box 12428 Mr. Michael Young, President Austin, TX, 78711-2428 Texas A&M University 1246 TAMU College Station, TX 77843-1246 Radiation Program Officer Bureau of Radiation Control Dr. M. Katherine Banks, Vice Chancellor Dept. of State Health Services and Dean Division for Regulatory Services Dwight Look College of Engineering 1100 West 49th St., MC 2828 3126 TAMU Austin, TX 78756-3189 College Station, TX 77843-3126 Technical Advisor Dr. Dimitris Lagoudas, Deputy Director Office of Permitting, Remediation &

Texas A&M Engineering Experiment Station Registration 3470 TAMU Texas Commission on Environmental College Station, TX 77843-3577 Quality P.O. Box 13087, MS 122 Dr. Narasimha Reddy, Assistant Agency Austin, TX 78711-3087 Director for Strategic Initiatives and Centers Texas A&M Engineering Experiment Station Test, Research and Training Reactor 3470 TAMU Newsletter College Station, TX 77843-3577 P.O. Box 118300 University of Florida Dr. Yassin Hassan, Department Head Gainesville, FL 32611-8300 Nuclear Engineering Texas A&M University Mr. Jerry Newhouse, Nuclear Engineering Department NSC Assistant Director 3133 TAMU Texas A&M Engineering Experiment Station College Station, TX 77843-3133 3575 TAMU College Station, TX 77843-3575 Dr. John Hardy Reactor Safety Board Chairman Texas A&M Mr. Scott Miller, University NSC Manager of Reactor Operations 3255 TAMU Texas A&M Engineering Experiment Station College Station, TX 77843-3255 3575 TAMU College Station, TX 77843-3575 Dr. Latha Vasudevan Radiological Safety Officer Mr. Jeremy Osborn Texas A&M University AGN-201M Reactor Supervisor Environmental Health and Safety Texas A&M University 1111 Research Parkway Nuclear Engineering Department College Station, TX 77843-4472 3133 TAMU College Station, TX 77843-3133 Nuclear Science Center 1095 Nuclear Science Road, 3575 TAMU College Station, TX 77843-3575 3 Tel. (979) 845-7551

ENCLOSURE 1 TEXAS ENGINEERING EXPERIMENT STATION TEXAS A&M UNIVERSITY FACILITY LICENSE R-83, DOCKET NO. 50-128 PROPOSED CHANGES TO THE LICENSE

c. to receive, possess, and use, but not separate, in connection with the operation of the facility, such special nuclear material as may be produced by the operation of the facility.

d. to receive and possess, but not use up to 0.7 Kilograms of contained Uranium-235 as AGN-201M < 20% enriched 235U reactor fuel, and any special nuclear materials produced by the operation of the AGN-201M reactor, for up to five years following issuance of license amendment xx dated May xx, 2016.

e. to receive and possess, but not use up to 0.020 kilograms of 239Pu as a 239 PuBe sealed neutron start-up source in connection with storage of the AGN-201M reactor, for up to five years following issuance of license amendment xx dated May xx, 2016.

3. Pursuant to the Act and 10 CFR Part 30, the following activities are included:

a. to receive, possess, and use, in connection with the operation of the facility, a sealed antimony-beryllium neutron startup source,

b. to receive, possess, and use, in connection with the operation of the facility, a sealed 2.5-curie americium-beryllium neutron source; and,

c. to receive, possess, and use, in connection with operation of the facility, such byproduct material as may be produced by operation of the reactor, which can not be separated except for byproduct material produced in reactor experiments.

d. to receive and possess, but not use or separate, byproduct materials produced by operation of the AGN-201M reactor, including contaminated and activated AGN-201M reactor components for up to five years following issuance of license amendment xx dated May xx, 2016.

4. Pursuant to the Act and 10 CFR Part 40, Domestic Licensing of Source Material, to receive, possess, and use in connection with operation of the facility, not more than 6.8 kilograms of source material.

C. This license shall be deemed to contain, and is subject to the conditions specified 10 CFR Parts 20, 30, 40, 50, 51, 55, 70, and 73 of the Commissions regulations; is subject to all provisions of the Act, and to the rules, regulations and orders of the Commission now or hereafter in effect, and is subject to the additional conditions specified or incorporated below:

1. Maximum Power Level The licensee is authorized to operate the reactor at a steady-state power level up to a maximum of 1000 kilowatts (thermal) and to pulse the reactor in accordance with the limitations in the Technical Specifications.

2. Technical Specifications The Technical Specifications contained in Appendix A are hereby incorporated in their entirety in the license. The licensee shall operate the facility in accordance with the Technical Specifications.

ENCLOSURE 2 TEXAS ENGINEERING EXPERIMENT STATION TEXAS A&M UNIVERSITY FACILITY LICENSE R-83, DOCKET NO. 50-128 PROPOSED CHANGES TO THE TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 1 Introduction 1.1 Scope This document constitutes the Technical Specifications for the Facility License No. R-83 as required by 10 CFR 50.36 and supersedes all prior Technical Specifications. This document includes the bases to support the selection and significance of the specifications. Each basis is included for information purposes only. They are not part of the Technical Specifications, and they do not constitute limitations or requirements to which the licensee must adhere.

1.2 Format These specifications are formatted to NUREG-1537 and ANSI/ANS 15.1-2007.

1.3 Definitions AGN-201M Neutron Start Up Source A plutonium-beryllium (,n) source used in the AGN-201M reactor to ensure the detectors are in their normal operating range and to verify operation of the low level interlock.

ALARA The ALARA program (As Low as Reasonably Achievable) is a program for maintaining occupational exposures to radiation and release of radioactive effluents to the environs as low as reasonably achievable.

Audit An audit is a quantitative examination of records, procedures, or other documents after implementation from which appropriate recommendations are made.

Channel A channel is the combination of sensors, lines, amplifiers, and output devices that are connected for the purpose of measuring the value of a parameter.

Channel Test A channel test is the introduction of a signal into the channel to verify that it is operable.

Channel Calibration A channel calibration is an adjustment of the channel such that its output corresponds, with acceptable accuracy, to known values of the parameter that the channel measures. Calibration shall encompass the entire channel, including equipment actuation, alarm, or trip and shall be deemed to include a channel test.

Page l 2 Texas Engineering Experiment Station NSC May xx, 2016

Channel Check A channel check is a qualitative verification of acceptable performance by observation of channel behavior. This verification, where possible, shall include comparison of the channel with other independent channels or systems measuring the same variable.

Confinement Confinement is an enclosure of the overall facility that is designed to limit the release of effluents between the enclosure and its external environment through controlled or defined pathways.

Control Rod A control rod is a device fabricated from neutron-absorbing material or fuel, or both, that is used to establish neutron flux changes and to compensate for routine reactivity losses. A control rod can be coupled to its drive unit allowing it to perform a safety function when the coupling is disengaged.

Regulating Control Rod The regulating rod is a low-worth control rod used primarily to maintain an intended power level that need not have scram capability. Its axial position may be varied manually or by the servo controller.

Shim Safety Control Rod A shim safety rod is a control rod having an electric motor drive and scram capabilities. It shall have a fueled follower section.

Transient Control Rod The transient rod is a pneumatically driven control rod with scram capabilities that is capable of providing rapid reactivity insertion to produce a pulse.

Core Configuration The core configuration includes the number, type, or arrangement of fuel elements, reflector elements, and regulating/shim-safety/transient rods occupying the core grid.

Core Lattice Position The core lattice position is that region in the core (approximately 3 x 3) over a grid-plug hole. A fuel bundle, an experiment, or a reflector element may occupy the position.

Excess Reactivity Excess reactivity is that amount of reactivity that would exist if all control rods were moved to the maximum reactive condition from the point where the reactor is exactly critical (keff = 1) at reference core conditions.

Page l 3 Texas Engineering Experiment Station NSC May xx, 2016

Experiment An operation, hardware, or target (excluding devices such as detectors, foils, etc.) that is designed to investigate non-routine reactor characteristics, or that is intended for irradiation within the pool, or in a beam port or irradiation facility. Hardware rigidly secured to a core or shield structure so as to be a part of its design to carry out experiments is not normally considered an experiment.

Secured Experiment A secured experiment is any experiment, experiment facility, or component of an experiment that is held in a stationary position relative to the reactor by mechanical means. The restraining forces must be substantially greater than those to which the experiment might be subjected by hydraulic, pneumatic, buoyant, other forces that are normal to the operating environment of the experiment, or by forces that can arise as a result of credible malfunctions.

Unsecured Experiment An unsecured experiment is any experiment or component of an experiment that does not meet the definition of a secured experiment.

Movable Experiment A movable experiment is one where it is intended that all or part of the experiment may be moved in or near the core or into and out of the reactor while the reactor is operating.

Experimental Facilities Experimental facilities shall mean beam ports, including extension tubes with shields, thermal columns with shields, vertical tubes, through tubes, in-core irradiation baskets, irradiation cell, pneumatic transfer systems, and in-pool irradiation facilities.

Experiment Safety Systems Experiment safety systems are those systems, including their associated input circuits, which are designed to initiate a scram for the primary purpose of protecting an experiment or to provide information for operator intervention.

Fuel Bundle A fuel bundle is a cluster of two, three, or four fuel elements and/or non-fueled elements secured in a square array by a top handle and a bottom grid plate adapter. Non-fueled elements shall be fabricated from stainless steel, aluminum, boron, or graphite materials.

Fuel Element A fuel element is a single TRIGA fuel rod of LEU 30/20 type.

Page l 4 Texas Engineering Experiment Station NSC May xx, 2016

Fuel - AGN-201M UO2 enriched to < 20% 235U mixed with polyethylene and pressed into cylindrical discs and fueled control rod ends, and 0.4 grams of 235U mixed with polystyrene.

Instrumented Fuel Element (IFE)

An instrumented fuel element is a special fuel element in which one or more thermocouples are embedded for the purpose of measuring the fuel temperatures during operation.

License The written authorization, by the U.S. NRC, for an individual or organization to carry out the duties and responsibilities associated with a personnel position, material, or facility requiring licensing.

Licensee A licensee is an individual or organization holding a license.

LEU Core An LEU core is an arrangement of TRIGA-LEU fuel in a reactor grid plate.

Limiting Safety System Setting (LSSS)

The limiting safety system setting is the fuel element temperature, which if exceeded, shall cause a reactor scram to be initiated, preventing the safety limit from being exceeded.

Measured Value A measured value is the value of a parameter as it appears on the output of a channel.

Operable Operable means a component or system is capable of performing its intended function.

Operating Operating means a component or system is performing its required function.

Operational Core - Steady State A steady state operational core shall be an LEU core which meets the requirements of the Technical Specifications.

Page l 5 Texas Engineering Experiment Station NSC May xx, 2016

Operational Core - Pulse A pulse operational core is a steady state operational core for which the maximum allowable pulse reactivity insertion has been determined.

Pool Water Reference Operating Level The pool water reference operating level is 10 inches below the top of the pool wall. This level is designed to prevent pool water from rising above the top of the liner.

Protective Action Protective action is the initiation of a signal or the operation of equipment within the reactor safety system in response to a parameter or condition of the reactor facility having reached a specified limit.

Pulse Mode Pulse mode operation shall mean any operation of the reactor with the mode selector switch in the pulse position.

Reactivity Worth of an Experiment The reactivity worth of an experiment is the value of the reactivity change that results from the experiment being inserted into or removed from its intended position.

Reactor Console Secured The reactor console is secured whenever all control rods have been verified to be fully inserted and the console key has been removed from the console.

Reactor Operating The reactor is operating whenever it is not secured or shutdown.

Reactor Operator A Reactor Operator is an individual who is licensed to manipulate the controls of a reactor.

Reactor Safety Systems Reactor safety systems are those systems, including their associated input channels, which are designed to initiate automatic reactor protection or to provide information for initiation of manual protective action.

Page l 6 Texas Engineering Experiment Station NSC May xx, 2016

Reactor Secured The reactor is secured when:

Either (1) There is insufficient moderator available in the reactor to attain criticality or there is insufficient fissile material present in the reactor to attain criticality under optimum available conditions of moderation and reflection; Or (2) All of the following conditions exist:

(a) All control rods are fully inserted; (b) The console key switch is in the off position and the key is removed from the console lock; (c) The reactor is shutdown; (d) No work is in progress involving core fuel, core structure, installed control rods, or control rod drives unless the control rod drives are physically decoupled from the control rods; (e) No experiments are moved or serviced that have, on movement, a reactivity worth exceeding

$1.00.

Reactor Shutdown The reactor is shut down if it is subcritical by at least $1.00 in the reference core condition with the reactivity worth of all installed experiments included.

Reference Core Condition The condition of the core when it is at ambient temperature (cold) and the reactivity worth of xenon is less than $0.01.

Reportable Occurrence Any of the following events is a reportable occurrence:

(1) Operation with actual safety system settings for required systems less conservative than the LSSS specified in the Technical Specifications; (2) Operation in violation of a Limiting Condition of Operation listed in Section 3 unless prompt remedial action is taken as permitted in Section 3; (3) Operation with a required reactor or experiment safety system component in an inoperative or failed condition which renders or could render the system incapable of performing its intended safety function. If the malfunction or condition is caused during maintenance, then no report is required; Page l 7 Texas Engineering Experiment Station NSC May xx, 2016

(4) An unanticipated or uncontrolled change in reactivity greater than $1.00. Reactor trips resulting from a known cause are excluded; (5) Abnormal and significant degradation in reactor fuel or cladding, or both, coolant boundary, or confinement boundary; and (6) An observed inadequacy in the implementation of either administrative or procedural controls, such that the inadequacy causes or could have caused the existence or development of an unsafe condition with regard to reactor operations.

Review A review is a qualitative examination of records, procedures, or other documents prior to implementation from which appropriate recommendations are made.

Safety Channel A safety channel is a channel in the reactor safety system.

Safety Limit Safety limits for nuclear reactors are limits upon important process variables that are found to be necessary to reasonably protect the integrity of certain of the physical barriers that guard against the uncontrolled release of radioactivity. For the Texas A&M NSC TRIGA reactor the safety limit is the maximum fuel element temperature that can be permitted with confidence that no damage to any fuel element cladding will result.

Scram Time Scram time is the elapsed time between the initiation of a scram signal and the instant that the slowest scrammable control rod reaches its fully inserted position.

Senior Reactor Operator A Senior Reactor Operator is an individual who is licensed to direct the activities of reactor operators.

Such an individual is also a reactor operator.

Shall, Should and May The word shall is used to denote a requirement; the word should to denote a recommendation; and the word may to denote permission, neither a requirement nor a recommendation.

Shutdown Margin Shutdown margin is the minimum shutdown reactivity necessary to provide confidence that the reactor can be made subcritical by means of the control and safety systems, starting from any permissible operating condition. This margin is determined assuming that the most reactive scrammable rod and any Page l 8 Texas Engineering Experiment Station NSC May xx, 2016

non-scrammable rods are fully withdrawn, and that the reactor will remain subcritical by this calculated margin without any further operator action.

Steady State Mode Steady state mode of operation shall mean operation of the reactor with the mode selector switch in the steady state position.

Surveillance Intervals The maximum surveillance intervals are provided for operational flexibility and the average surveillance intervals should be maintained over the long term.

Annually - an interval not to exceed 15 months.

Biennially - an interval not to exceed 30 months.

Monthly - an interval not to exceed 6 weeks.

Quarterly - an interval not to exceed 4 months.

Semiannually - an interval not to exceed 7.5 months.

Weekly - an interval not to exceed 10 days.

True Value The true value is the actual value of a parameter.

Unscheduled Shutdown An unscheduled shutdown is any unplanned shutdown of the reactor caused by actuation of the reactor safety system, operator error, equipment malfunction, or a manual shutdown in response to conditions that could adversely affect safe operation. It does not include shutdowns that occur during testing or check out operations.

Page l 9 Texas Engineering Experiment Station NSC May xx, 2016