Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• ML19337A827  + (Revises Util 791106 Schedule for Shipment of Motor Generator Sets to Be Installed as Part of LPCI Sys Power Supply Mods. Generator Sets Will Be Installed During Fall 1980 Unit 3, Spring 1981 Unit 1 & Spring 1982 Unit 2 Outages)
• ML18053A656  + (Revises Util 801219 Commitment Made in Response to NUREG-0737,item I.C.2, Shift & Relief Turnover Procedures. Util Will Maintain Sys Which Evaluates Effectiveness of Shift & Relief Turnover Procedure on Periodic Basis)
• ML20004F598  + (Revises Util 810422 Response to NRC Re Violations Noted in IE Insp of License 34-13317-02 on 810309-10. Technologist Was Trained in Procedures Prior to Performing Such.Files Did Not Reflect Training)
• ML17297B781  + (Revises Util 810818 Response to Open Item 50 of 810408 Auxiliary Sys Independent Review.Emergency Cooling Water Sys Adequately Designed.Tube Break Need Not Be Considered as Basic Design Event)
• ML18139B775  + (Revises Util 810824 Response to Safety Evaluation Rept for Environ Qualification of safety-related Electrical Equipment Per IE Bulletin 79-01B.Remaining Cable Terminations Will Be Modified During May & Fall 1982 Maint Outages)
• 1CAN048708, Revises Util 840815,850830 & 861020 Requests for Exemption from Requirements of App R of 10CFR50 Re Suppression & Separation in Emergency Feedwater Pump Room.Credit of Partial Suppression in Room Requested  + (Revises Util 840815,850830 & 861020 Requests for Exemption from Requirements of App R of 10CFR50 Re Suppression & Separation in Emergency Feedwater Pump Room.Credit of Partial Suppression in Room Requested)
• ML20235V210  + (Revises Util 851118 Response to Violations Noted in Insp Rept 50-285/85-15.Corrective Actions:Combustible Matls Removed from UF6 Storage Area & Signs Posted in Area Warning Personnel Against Storing Combustibles or Flammables There)
• ML20245J400  + (Revises Util 880802 Response to Generic Ltr 88-01, NRC Position on IGSCC in BWR Austenitic Stainless Steel Piping. NRC Positions on IGSCC Will Be Incorporated Into Inservice Insp Program)
• TXX-8879, Revises Util 881007 Comments on Draft Environ Protection Plan.Requests That Item 2 Under Section 2.1 Re Aquatic Issues Be Deleted.Section 4.2.1 Re Groundwater Levels & Station Water Use Monitoring Be Revised to Read as Stated  + (Revises Util 881007 Comments on Draft Environ Protection Plan.Requests That Item 2 Under Section 2.1 Re Aquatic Issues Be Deleted.Section 4.2.1 Re Groundwater Levels & Station Water Use Monitoring Be Revised to Read as Stated)
• ML20111B046  + (Revises Util 960205 Response to NRC RAI Question 2.C.1, Addressing Degree of Compliance W/Augmented Exam Established by NRC When Added Assurance of Structural Integrity Deemed Necessary)
• B16364, Revises Util Commitment Re Steam Supply Lines to Turbine Driven AFW Pump  + (Revises Util Commitment Re Steam Supply Lines to Turbine Driven AFW Pump)
• ML20091M333  + (Revises Util Commitment in SER Item 5, QA for Test,Maint & Surveillance. FSAR Will Be Updated to Include Explanation of Atws/Rts Diversity Requirements)
• ML20082P342  + (Revises Util Commitments,Contained in in Response to Generic Ltr 88-17 Re Loss of Dhr.Shutdown Cooling Low Flow Alarm Will Still Be Installed.Pressure Indication on Suction of LPCI Pumps Will Not Be Installed)
• ML20039D072  + (Revises Util Position,Presented in ,Re Requested Tech Spec Change for Gaseous Effluents.Minor Changes Are for Sake of Clarity)
• ML19260C542  + (Revises Util Re Item 2.1.4 of NUREG-0578, Deleting Ref to Temporary Disabling of Automatic Valve Logic Reset Function.Permanent Logic Mods Will Be Implemented within 30 Days of Receipt of Parts)
• ML20154D534  + (Revises Util to NRC Transmitting Safeguards Info Re Door Hatch & Blowout Panel Monitoring.Interlock Devices on Airlock Doors Will Be Used Instead of Posted Guards to Ensure Secondary Containment Integrity)
• ML20065P567  + (Revises WO Parker Re Schedule for Submission of Info Needed to Resolve Concerns Identified in DG Eisenhut & NUREG-0612.Info Requested in Sections 2.2 & 2.4 of Encl 2 to Be Submitted by 821124)
• ML19294B150  + (Revises to Nrc.During Fuel Loading & Low Power Testing,Util Will Provide Supplemental Onshift Coverage by Persons W/Significant Experience in Loading Large PWR Plants.Westinghouse Will Supply Some Personnel)
• L-MT-03-073, Revisied Emergency Plan Implementing Procedures  + (Revisied Emergency Plan Implementing Procedures)
• ULNRC-06949, Revision (Supplement) to Request to ASME Code Relief Regarding 48-Hr Hold Time When Performing Repairs Using Ambient Temperature GTAW Temper Bead Method Per ASME Code Case N-638-11 (Relief Request 15R-01)  + (Revision (Supplement) to Request to ASME Code Relief Regarding 48-Hr Hold Time When Performing Repairs Using Ambient Temperature GTAW Temper Bead Method Per ASME Code Case N-638-11 (Relief Request 15R-01))
• ML25148A289  + (Revision (Supplement) to Request to ASME Code Relief Regarding 48-Hr Hold Time When Performing Repairs Using Ambient Temperature GTAW Temper Bead Method Per ASME Code Case N-638-11 (Relief Request 15R-01))
• PLA-7285, Revision (X) to EP-RM-004, EAL Classification Bases  + (Revision (X) to EP-RM-004, EAL Classification Bases)
• ML15091A662  + (Revision (X) to EP-RM-004, EAL Classification Bases)
• LR-N04-0077, Revision 1 to 180-Day Response to Generic Letter 2003-01, Control Room Habitability  + (Revision 1 to 180-Day Response to Generic Letter 2003-01, Control Room Habitability)
• NOC-AE-02001325, Revision 1 to Unit 1 Cycle 11 Core Operating Limits Report  + (Revision 1 to Unit 1 Cycle 11 Core Operating Limits Report)

• NOC-AE-15003323, Revision 1 to the Cycle 20 Core Operating Limits Report  + (Revision 1 to the Cycle 20 Core Operating Limits Report)

• ML25181A777  + (Revision 13 to the Updated Final Safety Analysis Report, Technical Requirements Manual and Technical Specifications Bases)
• ML21273A124  + (Revision 14 of Coc No. 9036 for the Model No. C-1 Package)
• ML030650804  + (Revision 16 Tto SECG-TOC-BASIS and Revision 2 to SECG-SECT.03.1)
• NOC-AE-16003371, Revision 18 to Updated Final Safety Analysis Report, Section 9.4, Figure 9.4-1 to Figure 9.4.8-1  + (Revision 18 to Updated Final Safety Analysis Report, Section 9.4, Figure 9.4-1 to Figure 9.4.8-1)
• ML19037A144  + (Revision 19 to Updated Final Safety Analysis Report, Chapters 9, 12 and 15)
• ML19259A201  + (Revision 19 to Updated Final Safety Analysis Report)
• NOC-AE-08002351, Revision 2 to Proposed Amendment to Technical Specification 3.3.1 Required Action for Inoperable Extended Range Neutron Flux Instrumentation and Technical Specification 3.4.1.4.2 Action C  + (Revision 2 to Proposed Amendment to Technical Specification 3.3.1 Required Action for Inoperable Extended Range Neutron Flux Instrumentation and Technical Specification 3.4.1.4.2 Action C)
• BVY 06-039, Revision 2 to Steam Dryer Monitoring Plan  + (Revision 2 to Steam Dryer Monitoring Plan)
• NOC-AE-02001434, Revision 2 to Unit 1 Cycle 11 Core Operating Limits Report  + (Revision 2 to Unit 1 Cycle 11 Core Operating Limits Report)
• BVY 04-019, Revision 20, LPC1 to OP 3524, Emergency Actions to Ensure Initial Accountability and Security Response and Revision 2, LPCI1 to Operation of the Technical Support Center(Tsc).  + (Revision 20, LPC#1 to OP 3524, Emergency Actions to Ensure Initial Accountability and Security Response and Revision 2, LPCI#1 to Operation of the Technical Support Center(Tsc).)
• NOC-AE-17003430, Revision 21 to Physical Security Plan, Training and Qualification Plan, and Safeguards Contingency Plan. (Cover Letter Only)  + (Revision 21 to Physical Security Plan, Training and Qualification Plan, and Safeguards Contingency Plan. (Cover Letter Only))
• ML22244A196  + (Revision 21 to Updated Final Safety Analysis Report, Cover Letter and Information on Enclosures 1 to 7)
• ML23181A159  + (Revision 22 to Updated Final Safety Analysis Report, and Revision 3 to Operations Quality Assurance Program Description)
• EPID:L-2023-LRO-0051  + (Revision 22 to Updated Final Safety Analysis Report, and Revision 3 to Operations Quality Assurance Program Description)
• ML21361A235  + (Revision 22 to Updated Safety Analysis Report)
• ML21307A174  + (Revision 22 to Updated Safety Analysis Report)
• ML21102A218  + (Revision 23 to Updated Final Safety Analysis Report, Technical Specification Bases Changes, Technical Requirements Manual Changes, 10 CFR 50.59 Summary Report and Revised NRC Commitments Report)
• ML23208A088  + (Revision 23 to Updated Final Safety Analysis Report)
• ML17334A067  + (Revision 23 to Updated Safety Analysis Report)
• ML22111A258  + (Revision 25 to Updated Final Safety Analysis Report, Letter and Attachments A-F)
• ML22144A115  + (Revision 26 to Updated Final Safety Analysis Report)
• ML061290566  + (Revision 3 to Steam Dryer Monitoring Plan)
• ML21314A283  + (Revision 30 to Updated Final Safety Analysis Report, Updated NFPA 805 Fire Protection Program Design Basis Document, Technical Specification Bases Changes, Technical Requirements Manual Changes,)
• ML23318A074  + (Revision 31 to Updated Final Safety Analysis Report, Updated NFPA 805 Fire Protection Program Design Basis Document, Technical Specification Bases Changes, Technical Requirements Manual Changes,.)
• ML19360A097  + (Revision 31 to Updated Final Safety Analysis Report)