Search by property
Jump to navigation
Jump to search
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- IR 05000456/2024002 +
- IR 05000498/2024002 +
- IR 05000313/2024002 +
- ML20199C248 +
- ML081920283 +
- ML050210051 +
- ML18102A604 +
- ML20206K616 +
- L-03-010, Proposed Alternatives to Gas-Tungsten Arc Welding (Relief Request BV3-RV-03) +
- ML20215H984 +
- ML17031A280 +
- IR 05000482/2008003 +
- ML19151A392 +
- ML20083F698 +
- ML19351E144 +
- ML22251A094 +
- ML20129J936 +
- ML20141J989 +
- ML21216A178 +
- ML052560131 +
- CPSES-200301190, License Amendment Request (LAR) 03-03 Revision to Technical Specification (TS) 5.5.9 Steam Generator Tube Repair Using Leak Limiting Alloy 800 Sleeves +
- ML093370309 +
- L-2014-339, Inservice Inspection Plan - RAI Reply - Third Ten-Year Interval Unit 2 Relief Request No. 14 +
- ML20151L290 +
- ML20052A506 +
- ML19029A828 +
- ML20211H615 +
- ML050270083 +
- ML20062H676 +
- ML19072A214 +
- RS-16-057, Supplement to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds +
- ML20235H887 +
- ML20206G029 +
- LR-N20-0025, 2019 Annual Radioactive Effluent Release Report (Rerr) +
- ML20058M133 +
- ML20147D453 +
- ML032270201 +
- ML16165A448 +
- L-2017-026, Inservice Inspection Plans Fourth Ten-Year Interval Unit 1 Relief Request 12 +
- ML21313A338 +
- ML20247M954 +
- ML15203A702 +
- SBK-L-04065, ASME Section III and Section XI Relief Request Pr 04-01 for the Repair of CRDM Canopy Seal Welds +
- IR 05000387/2010002 +
- ML20210S517 +
- ML11356A355 +
- IR 05000443/1989003 +
- ML17132A167 +
- ML20207D743 +
- NMP1L3519, Submittal of Emergency Relief Request I5R-11 Concerning the Installation of a Weld Overlay on Reactor Pressure Vessel Recirculation Inlet Nozzle N2E Safe End-to-Nozzle Dissimilar Metal Weld (32-WD-208) +