Semantic search

Jump to navigation Jump to search
 QCCATitle
05000285/FIN-2014003-012014Q2H.4Failure to Control an Entry to a High Radiation Area Resulting in a Dose Rate Alarm
05000285/FIN-2014009-022014Q3H.14Multiple Examples of Failure to Evaluate Operability of Degraded or Non-Conforming Condition
05000285/FIN-2014009-092014Q3P.2Failure to Incorporate Design Requirements for Switchgear Room Cooling
05000285/FIN-2014004-012014Q3H.12Failure to Implement Procedural and alarm setpoint changes in support of an Operability Eval
05000285/FIN-2014004-022014Q3P.4Failure to Maintain a Testing Program for the Containment Spray System
05000285/FIN-2014004-032014Q3Failure to Verify the Adequacy of the Design of the FO-10 to FO-1 Fuel Oil Transfer System
05000285/FIN-2014009-042014Q3Failure to Perform an Evaluation for a New Operator Manual Action to Refill Component Cooling Water System During Post- Accident Conditions
05000285/FIN-2014009-082014Q3Failure to Report Loss of Environmental Qualification of Safety Related Limit Switches within Required Time Limits
05000285/FIN-2014009-132014Q3Failure to Perform Evaluation for Design Change
05000285/FIN-2014009-052014Q3H.6Inadequate Design Inputs into Safety Injection Piping Stress Calculation
05000285/FIN-2014009-072014Q3P.5Failure to Accurately Model Flow Path for External Flood Mitigation
05000285/FIN-2014009-102014Q3H.14Deficient Evaluation of NRC Bulletin 88-04, Strong Pump Weak Pump Due to Failure to Consider the Effect of Auxiliary Feedwater Pumps Discharge Check Valves Leakage
05000285/FIN-2014009-112014Q3H.1Failure to Ensure Safe Operations at Design Basis Low River Level
05000285/FIN-2014009-142014Q3P.2Failure to Account for Worst Case Diesel Frequency in Fuel Oil Consumption Calcula
05000285/FIN-2014009-152014Q3H.6Failure to Promptly Identify and Correct a Condition Adverse to Quality
05000285/FIN-2014009-162014Q3H.9Failure to Correct Longstanding Software Classification Issues
05000285/FIN-2014009-172014Q3P.2Inadequate Corrective Actions to Properly Implement Applicable ASME OM Code Requirements
05000285/FIN-2014009-182014Q3H.5Failure to Complete Corrective Actions in a Timely Manner
05000285/FIN-2014009-192014Q3H.1Failure to Maintain B.5.b Equipment in a State of Readiness to Support Mitigation Strategies
05000285/FIN-2014009-202014Q3H.12Failure to Correct Conditions Adverse to Quality in the Diesel Generator Stating Air System
05000285/FIN-2014009-212014Q3P.5Failure to Take Timely Corrective Actions for an Unsealed Raw Water System Control Panel
05000285/FIN-2014009-062014Q3P.2Failure to Maintain Design Control of Raw Water Strainer Control Panel
05000285/FIN-2014009-012014Q3H.13Failure to Initiate Condition Reports for Gaps Identified in Resolving NRC Non-Cited Violations
05000285/FIN-2014009-122014Q3H.1Failure to Maintain Effectiveness of an Emergency Plan
05000285/FIN-2014009-032014Q3P.2Failure to Adequately Perform an Operability Evaluation and a 50.59 Evaluation
05000285/FIN-2013018-012014Q4Failure to Correctly Translate Design Requirements into Installed Plant Configuration
05000285/FIN-2013018-022014Q4H.2Use of Non-conservative Values in Design Analyses
05000285/FIN-2013018-032014Q4Failure to Furnish Evidence of Activities Affecting Quality
05000285/FIN-2013018-042014Q4P.2Failure to Promptly Identify and Correct Inadequate Internal Flooding Analysis
05000285/FIN-2013018-052014Q4H.14Use of Non-Conservative Inputs in Thermal Lag Analyse
05000285/FIN-2013018-062014Q4H.14Failure to Recognize Adverse Design Changes
05000285/FIN-2013018-072014Q4P.3Failure to Maintain Design Control of the Auxiliary Feedwater
05000285/FIN-2014005-012014Q4P.2Failure to establish Appropriate Preventive Maintenance and Failure to Identify Raw Water SSC Maintenance Rule Performance Criteria Exceeded and thereby establish Monitoring Requirements for the SSC
05000285/FIN-2014005-022014Q4H.5Failure to determine the availability of local population data for use in estimating changes in the EPZ population