ND-21-0392, Enclosure 3 - Vogtle Electric Generating Plant (VEGP) Unit 3 CB&I Procedure Qualification Record 14163 (VEGP 3-ALT-16)

From kanterella
Jump to navigation Jump to search
Enclosure 3 - Vogtle Electric Generating Plant (VEGP) Unit 3 CB&I Procedure Qualification Record 14163 (VEGP 3-ALT-16)
ML21154A214
Person / Time
Site: Vogtle Southern Nuclear icon.png
Issue date: 06/03/2021
From:
Southern Nuclear Operating Co
To:
Office of Nuclear Reactor Regulation
Shared Package
ML21154A210 List:
References
ND-21-0392
Download: ML21154A214 (8)
v • d • e


Text

Southern Nuclear Operating Company ND-21-0392 Enclosure 3 Vogtle Electric Generating Plant(VEGP) Unit 3 CB&I Procedure Qualification Record 14163 (VEGP 3-ALT-16)

(This Enclosure consists of 8 pages, including this cover page)

ND-21-0392 Enclosure 3 PROCEDURE QUALIFICATION RECORD CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 To A.S.M.E.Section IX Page 2 of 8 ESSENTIAL VARIABLES PGR No. 14163 Process SMAW Manuail Xl Machinel l Auto.l lSemiauto. [ l Material specification SA738 Gr, B to SA516 Gr. 60/70 Flux or Atmosphere ASME P No, 1, Gp. 3 To ASME P No. 1, Gp. 1/2 Flux trade name N/A Thickness(if pipe, dia and wail thick) 1.125" Inert gas composition N/A Filler metal group no. F 4 Flow rate N/A Weld metai analysis no. A 1 Preheat temperature range 151°F-278°F(IPT)

ASME specification no. SPA _ 5.1 Postweid heat treatment None AWS specification no. A 5.1 Plate edge preparation Oxy Fuel burned WELDING PROCEDURE Single or multiple pass Multiple Single or multiple arc Single Position 2G Mode of transfer for GMAW: Sprayl l Giobularl l Pulsatingl l Short CircuitI l Filler Metal for GTAW or PAW N/A Filler metai diameter N/A Electrode E7018 Electrode diameter 3/32" Type of backing None Welding current Direct Current / Electrode Positive Consult WELDING VARIABLES for joint dimensions and welding current settings. (Reverse Polarity)

TEST RESULTS Reduced Section Tensile Results Dimensions, in. Ultimate Ultimate Unit Character of Failure Specimen No. Area Total Load Stress and Location Width Thickness in ^ Kips ksi MPa P23403 1 0.749 1.020 0.764 59 77.2 532.3 Ductile Weld Metal P23403 2 0.752 0.992 0.746 57.7 77.3 533.0 Ductile Weld Metal Guided Bend Test Type Result Type Result 4 Transverse Side Bends 4 OK Welder's name Scott L. KIrman Welder's symbol SLK Welder's name Welder's symbol Who by virtue of these tests meets welder performance requirements.

Work Order (Grig. WPS) No. P234Q3 Rev. 1 We certify that the statements in this record are correct and that the test weld was prepared, welded and tested in accordance with the requirements of Section iX of the ASME code.

Signed CB&i Date May 13, 2021

'atrick HoMgnton Remarks; Excalibur 7018 MR (E7018) by Lincoln (Lot No. 1443Z)

SA738 Gr. B heat treatment: Quenched & Tempered SA516 Gr. 60/70 heat treatment: Normalized This PGR is qualified using a material which is dual certified as SA516 Gr. 60(P1,Gp.1) and SA516 Gr. 70 (P-1, Gp.2)

Form Number: CMS-830-15-FM-16008

ND-21-0392 Enclosure 3 CB&I Procedure Qualification Record 14163 PROCEDURE QUALIFICATION RECORD VEGP3-ALT-16 To A.S.M.E.Section IX Page 3 of 8 ESSENTIAL VARIABLES Land: 1/8" Scale 1:1 Gap: 1/8" Technique: Stringer Position 2G Electrode T ravel Side Pass Size Amps Volts S peed Heat Input Remarks Type In mm in/min cm/min KJ/in KJ/cm 1 1 E7018 3/32 2.4 102 24.2 3.4 8,6 43.8 17.2 1 2 E7018 3/32 2.4 101 22.6 7.6 19.2 18.1 7.1 1 3 E7018 3/32 2.4 101 22.8 6.4 16.3 21.6 8.5 1 4 E7018 3/32 2.4 101 22.7 5.8 14.8 23.7 9.3 1 5 E7018 3/32 2.4 101 23 5.6 14.1 25.1 9.9 1 6 E7018 3/32 2.4 101 22.3 8.1 20.5 16.8 6.6 1 7 E7018 3/32 2.4 101 22.6 10.4 26.5 13.1 5.2 1 8 E7018 3/32 2.4 101 24.2 8.1 20.5 18.2 7.2 1 9 E7018 3/32 2.4 101 23.6 7.6 19.2 18.9 7.4 1 10 E7018 3/32 2.4 101 23.7 6.4 16.3 22.4 8.8 1 11 E7018 3/32 2.4 101 23 8.1 20.5 17.3 6.8 1 12 E7018 3/32 2.4 101 23.9 10.4 26.5 13.9 5.5 1 13 E7018 3/32 2.4 102 22.1 8.1 20.5 16.8 6.6 W/0 No, P23403 Qualification No. 14163 Date: May 13, 2021 By:

Patrick Hou fiton Form Number: CMS-830-15-FM-16008

ND-21-0392 Enclosure 3 CB&I Procedure Qualification Record 14163 PROCEDURE QUALIFICATION RECORD VEGP3-ALT-16 To A.S.M.E.Section IX Page 4 of 8 ESSENTIAL VARIABLES Electrode Travel Side Pass Size Amps Volts Speed Heat Input Remarks Type in mm in/min cm/min KJ/in KJ/mm 2 1 E7018 3/32 2.4 102 21.1 4.6 11.8 27.9 1.1 2 2 E7018 3/32 2.4 101 23.9 8.1 20.5 18.0 0.7 2 3 E7018 3/32 2.4 101 22.6 5.4 13.8 25.2 1.0 2 4 E7018 3/32 2.4 101 22.2 7.1 18.1 18.8 0.7 2 5 E7018 3/32 2.4 101 21.4 4.9 12.5 26.5 1.0 2 6 E7018 3/32 2.4 101 22.6 6.1 15.5 22.5 0.9 2 7 E7018 3/32 2.4 101 23,3 5.1 13.0 27.7 1.1 2 8 E7018 3/32 2.4 101 23.1 5.3 13.5 26.3 1.0 2 9 E7018 3/32 2.4 102 22.8 6.8 17.2 20.7 0.8 2 10 E7018 3/32 2.4 101 22.2 8.1 20.5 16.7 0.7 2 11 E7018 3/32 2.4 99 25.3 10.0 25.4 15.0 0.6 2 12 E7018 3/32 2.4 101 22.3 8.9 22.7 15.1 0.6 W/0 No. P23403 Qualification No. 14163 By:

Date: May 13, 2021 Patrick Hoi Form Number: CMS-830-15-FM-16008

ND-21-0392 Enclosure 3 PROCEDURE QUALIFICATION RECORD CB&I Procedure Qualification Record 14163 VEGP 3-ALT-16 IMPACT TEST REPORT Page 5 of 8 Type of Notch: Vee Test Spec. Spec. Spec. Notch Temp Energy Lateral Expansion Percent No. Orient Size Location Side Depth Deg F Ft-Lb J Mils mm Shear A1 FULL WM 1 3/8" -30 99.5 135 69 1.753 70 A2 FULL WM 1 3/8" -30 107.63 146 61 1.549 60 A3 FULL WM 1 3/8" -30 99.64 135 65 1.651 65 SA738 Gr. B B1 Long. FULL HAZ 1 1/4T -30 145.97 198 81 2.057 75 82 Long. FULL HAZ 1 1/4T -30 111.77 152 68 1.727 70 B3 Long. FULL HAZ 1 1/4T -30 117.17 159 67 1.702 70 SA516 Gr. 60/70 01 Long. FULL HAZ 1 1/4T -30 42.62 58 34 0.864 35 C2 Long. FULL HAZ 1 1/4T -30 128.7 175 72 1.829 75 C3 Long. FULL HAZ 1 1/4T -30 90.04 122 61 1.549 65 Remarks:

W/0 No. P23403 Qualification No. 14163 By:

Date; May 13, 2021 Patrick Ho Form Number: CMS-830-15-FM-16008

ND-21-0392 Enclosure 3 PROCEDURE QUALIFICATION RECORD CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 VICKERS HARDNESS REPORT Page 6 of 8

( 10 Kg. LOAD)

POSITION 20 Side 1 Side 2 Root

1. BM 208 16. BM 209 31. BM 239
2. BM 205 17. BM 225 32. BM 240
3. BM 202 18. BM 207 33. BM 237
4. HAZ 216 19. HAZ 221 34. HAZ' 229
5. HAZ 256 20. HAZ 220 35. HAZ" 238
6. HAZ 306 21. HAZ 298 36. HAZ" 328
7. WM 225 22. WM 237 37. WM " 234
8. WM 196 23. WM 232 38. WM " 239
9. WM 224 24. WM 236 39. WM " 225
10. HAZ" 328 25. HAZ 258 40. HAZ" 409
11. HAZ" 208 26. HAZ 209 41. HAZ" 212
12. HAZ' 178 27. HAZ 199 42. HAZ' 177
13. BM 162 28. BM 160 43. BM 161
14. BM 159 29. BM 160 44. BM 154
15. BM 161 30. BM 160 45. BM 160 I

-k Im SA5I6 Gr. 60/704^

5A738 Or. 0 Side I W/0 No. P23403 Qualification No. 14163 By:

Date: May 13, 2021 Patrick HougMbn Form Number: CMS-830-15-FM-16008

ND-21-0392 Enclosure 3 PROCEDURE QUALIFICATION RECORD CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 BRINELL SURFACE HARDNESS REPORT Page 7 of 8 (3000 kg LOAD 10mm INDENTER)

POSITION 2G Side 1

1. BM 201
2. HAZ 213
3. WM 208
4. HAZ 194
5. BM 158 Side 2
6. BM 227
7. HAZ 228
8. WM 220
9. HAZ 199
10. BM 156 Side 2 W/0 No. P23403 Qualification No. 14163 By:

Date; May 13, 2021 Patrick Houg Form Number: CMS-830-15-FM-16008

ND-21-0392 Enclosure 3 PROCEDURE QUALIFICATION RECORD CB&I Procedure Qualification Record 14163 m METALLOGRAPHY REPORT Macrophotograph VEGP3-ALT-16 Page 8 of 8 SA516 Gr. 60/70 SA738 Gr. B HAZ minimum width; 1.1mm HAZ maximum width; 3.0mm Scale Increment; 0.5mm Etchant: 5% Nital Finish: 1 micron Photomacrograph: Cross-section of an SMAW weld seam.

W/0 No. P23403 Qualification No. 14163 By; Date; May 13, 2021 Form Number; CMS-830-15-FM-16008

Retrieved from "https://kanterella.com/w/index.php?title=ND-21-0392,_Enclosure_3_-_Vogtle_Electric_Generating_Plant_(VEGP)_Unit_3_CB%26I_Procedure_Qualification_Record_14163_(VEGP_3-ALT-16)&oldid=3409628"