ND-21-0392, Enclosure 3 - Vogtle Electric Generating Plant (VEGP) Unit 3 CB&I Procedure Qualification Record 14163 (VEGP 3-ALT-16)

From kanterella
(Redirected from ND-21-0392)
Jump to navigation Jump to search
Enclosure 3 - Vogtle Electric Generating Plant (VEGP) Unit 3 CB&I Procedure Qualification Record 14163 (VEGP 3-ALT-16)
ML21154A214
Person / Time
Site: Vogtle Southern Nuclear icon.png
Issue date: 06/03/2021
From:
Southern Nuclear Operating Co
To:
Office of Nuclear Reactor Regulation
Shared Package
ML21154A210 List:
References
ND-21-0392
Download: ML21154A214 (8)
v • d • e


Text

Southern Nuclear Operating Company ND-21-0392 Vogtle Electric Generating Plant (VEGP) Unit 3 CB&I Procedure Qualification Record 14163 (VEGP 3-ALT-16)

(This Enclosure consists of 8 pages, including this cover page)

PROCEDURE QUALIFICATION RECORD To A.S.M.E.Section IX ESSENTIAL VARIABLES ND-21-0392 CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 Page 2 of 8 14163 SMAW PGR No.

Process Material specification ASME P No, 1, Gp. 3 SA738 Gr, B to SA516 Gr. 60/70 Manuail X l Machinel l Auto.l l Semiauto.

[ l Flux or Atmosphere To ASME P No.

Thickness(if pipe, dia and wail thick) 1.125" Filler metal group no. F 4

Weld metai analysis no. A ASME specification no. SPA AWS specification no. A 1

5.1 5.1 1, Gp. 1/2 Flux trade name Inert gas composition Flow rate Preheat temperature range Postweid heat treatment Plate edge preparation N/A N/A N/A 151°F-278°F(IPT)

None Oxy Fuel burned Single or multiple pass WELDING PROCEDURE Multiple Single or multiple arc Single Position 2G Mode of transfer for GMAW:

Sprayl l Giobularl l Pulsatingl l Filler Metal for GTAW or PAW N/A Filler metai diameter Electrode E7018 Electrode diameter Short Circuit I l N/A None 3/32" Welding current Type of backing Consult WELDING VARIABLES for joint dimensions and welding current settings.

TEST RESULTS Reduced Section Tensile Results Direct Current / Electrode Positive (Reverse Polarity)

Dimensions, in.

Ultimate Ultimate Unit Character of Failure Specimen No.

Area Total Load Stress and Location Width Thickness in ^

Kips ksi MPa P23403 1 0.749 1.020 0.764 59 77.2 532.3 Ductile Weld Metal P23403 2 0.752 0.992 0.746 57.7 77.3 533.0 Ductile Weld Metal

Guided Bend Test Type Result Type Result 4 Transverse Side Bends 4 OK Scott L. KIrman Welder's name Welder's name

Who by virtue of these tests meets welder performance requirements.

Work Order (Grig. WPS) No.

P234Q3 Rev.

1 Welder's symbol Welder's symbol SLK We certify that the statements in this record are correct and that the test weld was prepared, welded and tested in accordance with the requirements of Section iX of the ASME code.

Signed CB&i Date May 13, 2021

'atrick HoMgnton Remarks; Excalibur 7018 MR (E7018) by Lincoln (Lot No. 1443Z)

SA738 Gr. B heat treatment: Quenched & Tempered SA516 Gr. 60/70 heat treatment: Normalized This PGR is qualified using a material which is dual certified as SA516 Gr. 60 (P1,Gp.1) and SA516 Gr. 70 (P-1, Gp.2)

Form Number: CMS-830-15-FM-16008

PROCEDURE QUALIFICATION RECORD To A.S.M.E.Section IX ESSENTIAL VARIABLES ND-21-0392 CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 Page 3 of 8 1/8" Scale 1:1 Position 2G Land:

Gap:

Technique:

Stringer 1/8" Side Pass Electrode Amps Volts T

ravel Heat Input Remarks Type Size Speed In mm in/min cm/min KJ/in KJ/cm 1

1 E7018 3/32 2.4 102 24.2 3.4 8,6 43.8 17.2 1

2 E7018 3/32 2.4 101 22.6 7.6 19.2 18.1 7.1 1

3 E7018 3/32 2.4 101 22.8 6.4 16.3 21.6 8.5 1

4 E7018 3/32 2.4 101 22.7 5.8 14.8 23.7 9.3 1

5 E7018 3/32 2.4 101 23 5.6 14.1 25.1 9.9 1

6 E7018 3/32 2.4 101 22.3 8.1 20.5 16.8 6.6 1

7 E7018 3/32 2.4 101 22.6 10.4 26.5 13.1 5.2 1

8 E7018 3/32 2.4 101 24.2 8.1 20.5 18.2 7.2 1

9 E7018 3/32 2.4 101 23.6 7.6 19.2 18.9 7.4 1

10 E7018 3/32 2.4 101 23.7 6.4 16.3 22.4 8.8 1

11 E7018 3/32 2.4 101 23 8.1 20.5 17.3 6.8 1

12 E7018 3/32 2.4 101 23.9 10.4 26.5 13.9 5.5 1

13 E7018 3/32 2.4 102 22.1 8.1 20.5 16.8 6.6 W/0 No, P23403 Qualification No.

14163 Date:

May 13, 2021 By:

Patrick Hou fiton Form Number: CMS-830-15-FM-16008

PROCEDURE QUALIFICATION RECORD To A.S.M.E.Section IX ESSENTIAL VARIABLES ND-21-0392 CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 Page 4 of 8 Side Pass Electrode Volts T

ravel Speed Heat Input Remarks Type Size Amps in mm in/min cm/min KJ/in KJ/mm 2

1 E7018 3/32 2.4 102 21.1 4.6 11.8 27.9 1.1 2

2 E7018 3/32 2.4 101 23.9 8.1 20.5 18.0 0.7 2

3 E7018 3/32 2.4 101 22.6 5.4 13.8 25.2 1.0 2

4 E7018 3/32 2.4 101 22.2 7.1 18.1 18.8 0.7 2

5 E7018 3/32 2.4 101 21.4 4.9 12.5 26.5 1.0 2

6 E7018 3/32 2.4 101 22.6 6.1 15.5 22.5 0.9 2

7 E7018 3/32 2.4 101 23,3 5.1 13.0 27.7 1.1 2

8 E7018 3/32 2.4 101 23.1 5.3 13.5 26.3 1.0 2

9 E7018 3/32 2.4 102 22.8 6.8 17.2 20.7 0.8 2

10 E7018 3/32 2.4 101 22.2 8.1 20.5 16.7 0.7 2

11 E7018 3/32 2.4 99 25.3 10.0 25.4 15.0 0.6 2

12 E7018 3/32 2.4 101 22.3 8.9 22.7 15.1 0.6 W/0 No.

P23403 Qualification No.

14163 Date:

May 13, 2021 By:

Patrick Hoi Form Number: CMS-830-15-FM-16008

PROCEDURE QUALIFICATION RECORD IMPACT TEST REPORT Type of Notch: Vee ND-21-0392 CB&I Procedure Qualification Record 14163 VEGP 3-ALT-16 Page 5 of 8 Spec.

No.

Spec.

Orient Spec.

Size Notch Location Side Depth Test Temp Deg F Energy Lateral Expansion Percent Shear Ft-Lb J

Mils mm A1

FULL WM 1

3/8"

-30 99.5 135 69 1.753 70 A2

FULL WM 1

3/8"

-30 107.63 146 61 1.549 60 A3

FULL WM 1

3/8"

-30 99.64 135 65 1.651 65 SA738 Gr. B B1 Long.

FULL HAZ 1

1/4T

-30 145.97 198 81 2.057 75 82 Long.

FULL HAZ 1

1/4T

-30 111.77 152 68 1.727 70 B3 Long.

FULL HAZ 1

1/4T

-30 117.17 159 67 1.702 70 SA516 Gr. 60/70 01 Long.

FULL HAZ 1

1/4T

-30 42.62 58 34 0.864 35 C2 Long.

FULL HAZ 1

1/4T

-30 128.7 175 72 1.829 75 C3 Long.

FULL HAZ 1

1/4T

-30 90.04 122 61 1.549 65 Remarks:

W/0 No.

Qualification No.

Date; P23403 14163 May 13, 2021 By:

Patrick Ho Form Number: CMS-830-15-FM-16008

PROCEDURE QUALIFICATION RECORD VICKERS HARDNESS REPORT

( 10 Kg. LOAD)

ND-21-0392 CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 Page 6 of 8 POSITION 20 Side 1 Side 2 Root

1. BM
2. BM
3. BM
4. HAZ
5. HAZ
6. HAZ I
7. WM
8. WM
9. WM
10. HAZ"
11. HAZ"
12. HAZ'
13. BM
14. BM
15. BM 208 205 202 216 256 306 225 196 224 328 208 178 162 159 161
16. BM
17. BM
18. BM
19. HAZ
20. HAZ
21. HAZ
22. WM
23. WM
24. WM
25. HAZ
26. HAZ
27. HAZ
28. BM
29. BM
30. BM 209 225 207 221 220 298 237 232 236 258 209 199 160 160 160
31. BM
32. BM
33. BM
34. HAZ'
35. HAZ"
36. HAZ"
37. WM "
38. WM "
39. WM "
40. HAZ"
41. HAZ"
42. HAZ'
43. BM
44. BM
45. BM 239 240 237 229 238 328 234 239 225 409 212 177 161 154 160 I

Side I Im SA5I6 Gr. 60/704^

-k 5A738 Or. 0 P23403 W/0 No.

Qualification No.

Date:

May 13, 2021 14163 By:

Patrick HougMbn Form Number: CMS-830-15-FM-16008

PROCEDURE QUALIFICATION RECORD BRINELL SURFACE HARDNESS REPORT (3000 kg LOAD 10mm INDENTER)

ND-21-0392 CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 Page 7 of 8 POSITION 2G Side 1

1. BM
2. HAZ
3. WM
4. HAZ
5. BM 201 213 208 194 158 Side 2
6. BM
7. HAZ
8. WM
9. HAZ
10. BM 227 228 220 199 156 Side 2 W/0 No.

Qualification No.

Date; P23403 14163 May 13, 2021 By:

Patrick Houg Form Number: CMS-830-15-FM-16008

m PROCEDURE QUALIFICATION RECORD METALLOGRAPHY REPORT Macrophotograph ND-21-0392 CB&I Procedure Qualification Record 14163 VEGP3-ALT-16 Page 8 of 8 SA516 Gr. 60/70 SA738 Gr. B HAZ minimum width; 1.1mm HAZ maximum width; 3.0mm Scale Increment; 0.5mm Etchant:

Finish:

Photomacrograph:

5% Nital 1 micron Cross-section of an SMAW weld seam.

P23403 W/0 No.

Qualification No.

Date; May 13, 2021 14163 By; Form Number; CMS-830-15-FM-16008

Retrieved from "https://kanterella.com/w/index.php?title=ND-21-0392,_Enclosure_3_-_Vogtle_Electric_Generating_Plant_(VEGP)_Unit_3_CB%26I_Procedure_Qualification_Record_14163_(VEGP_3-ALT-16)&oldid=3815374"