ML25150A356
| ML25150A356 | |
| Person / Time | |
|---|---|
| Site: | 07109384 |
| Issue date: | 06/13/2025 |
| From: | Yoira Diaz-Sanabria Storage and Transportation Licensing Branch |
| To: | Robatel Technologies |
| Shared Package | |
| ML25150A355 | List: |
| References | |
| EPID L-2024-NEW-0003 | |
| Download: ML25150A356 (1) | |
Text
U.S. NUCLEAR REGULATORY COMMISSION NRC FORM 618 (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES 1.
- a. CERTIFICATE NUMBER
- b. REVISION NUMBER
- c. DOCKET NUMBER
- d. PACKAGE IDENTIFICATION NUMBER PAGE PAGE S
9384 0
71-9384 USA/9384/B(U)-96 1
OF 4
2.
PREAMBLE
- a. This certificate is issued to certify that the package (packaging and contents) described in Item 5 below meets the applicable safety standards set forth in Title 10, Code of Federal Regulations, Part 71, Packaging and Transportation of Radioactive Material.
- b. This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
3.
THIS CERTIFICATE IS ISSUED ON THE BASIS OF A SAFETY ANALYSIS REPORT OF THE PACKAGE DESIGN OR APPLICATION a.
ISSUED TO (Name and Address)
- b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION Robatel Technologies, LLC 5115 Bernard Drive Suite 304 Roanoke, VA 24018 Robatel Technologies, LLC, application, Revision No.
3, dated May 30, 2025.
- 4. CONDITIONS This certificate is conditional upon fulfilling the requirements of 10 CFR Part 71, as applicable, and the conditions specified below.
5.
(a)
Packaging (1)
Model No.: RT-200 (2)
Description The Model RT-200 packaging is a cylindrical body comprised of a double layer stainless-steel shell and the annular space between the shells is filled with lead. A thin layer of ceramic fiber insulation, which is surrounded by stainless-steel, is adjacent to the shell of the cylindrical body. The base of the packaging consists of a one-piece stainless-steel rear forging. This forging is connected to the inner shell with full penetration welds and to the outer shell with partial penetration welds. The inside height of the cylindrical body is 4570 mm (179.92 in) high and 1100 mm (43.31 in) for the inner diameter. The external body dimensions are 1590 mm (62.60 in) in diameter and 5250 mm (206.69 in) high. This cylindrical body serves as the containment boundary of the package.
The primary stainless-steel lid is fastened to the packaging body with thirty (30) stainless-steel M42 bolts.
Impact limiters are overall cylindrical in shape. They cover and protect the two ends of the cask during impact and extend from the front and rear beyond the body and the cask lid. The two impact limiters (front and rear) have an outside diameter of 2520 mm (99.21 in). The front and rear impact limiters extend 440 mm (17.32 in) beyond the primary lid and the base of the packaging. The impact limiter external shells are stainless-steel, and the volume inside the shell is filled with preformed rigid foam.
The impact limiters are bolted to the lid or the rear of the cask with eight (8) equally spaced M42 bolts.
U.S. NUCLEAR REGULATORY COMMISSION NRC FORM 618 (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES 1.
- a. CERTIFICATE NUMBER
- b. REVISION NUMBER
- c. DOCKET NUMBER
- d. PACKAGE IDENTIFICATION NUMBER PAGE PAGE S
9384 0
71-9384 USA/9384/B(U)-96 2
OF 4
5(a)(2) Packaging Description (Continued)
The maximum gross weight of the packages 76,500 kg. The nominal (empty) weight of the packaging is 62,997 kg.
(3)
Drawings The packaging is constructed and assembled in accordance with Robatel Technologies, LLC, Drawing Nos.:
RT-200 PC 001, Sheets 5-13, Rev. E - RT-200 Without Content RT-200 PC 002, Sheets 1-4, Rev. E - RT-200 With Content No. 1 AS-SC-SK03, Rev. C - Activated Services Storage Container Overall Assembly Sheet 1/1 (b)
Contents (1)
Type and form of material:
(i) Content No. 1 - Solid irradiated and contaminated non-fuel-bearing materials and stellite boxes in storage containers.
(ii) Content No. 2 - Miscellaneous solid irradiated and contaminated non-fuel-bearing hardware in secondary containers.
(2)
Maximum quantity of material per package (i)
Maximum quantity of material within Content No. 1 (including 3 storage containers) is limited to 30,000 Ci and 3,000 A2.
(ii)
Maximum quantity of material within Content No. 2 is limited to 30,000 Ci and 3,000 A2 and 10Ci/kg (0.37 TBq/kg) of Co-60 equivalent.
(iii)
The contents described in 5(b)(1)(i) and 5(b)(1)(ii) may contain fissile material provided the quantity of material does not exceed the exempt quantity under 10 CFR 71.15.
(iv)
Maximum decay heat:
(1) Content No. 1: 1,200 watts
U.S. NUCLEAR REGULATORY COMMISSION NRC FORM 618 (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES 1.
- a. CERTIFICATE NUMBER
- b. REVISION NUMBER
- c. DOCKET NUMBER
- d. PACKAGE IDENTIFICATION NUMBER PAGE PAGE S
9384 0
71-9384 USA/9384/B(U)-96 3
OF 4
(2) Content No. 2: 1,200 watts (v)
Maximum weight of contents:
(1) Content No. 1: 8,400 kg including storage containers, disposable insert and dedicated basket.
(2) Content No. 2: 8,400 kg including secondary containers and component spacers or shoring.
6.
In addition to the requirements of Subpart G of 10 CFR Part 71:
(a)
The package must be prepared for shipment and operated in accordance with the Operating Procedures of Chapter 7 of the application, (b)
The packaging must be tested and maintained in accordance with the acceptance tests and maintenance program described in Chapter 8 of the application.
7.
The weight of water must be excluded when determining the Ci/g of content limits.
- 8.
For Content No. 1 only, the source distribution must not shift during NCT.
9.
The package shall be transported exclusive use only.
10.
No air shipment is authorized.
11.
Flammable gas (e.g., hydrogen) concentration is limited to less than 5% by volume.
12.
Material that presents other risks than those related to its radioactive features is prohibited, including explosives, non-radioactive pyrophoric materials, and corrosives (pH less than 2 or greater than 12.5), pyrophoric radionuclides and materials that may auto-ignite or undergo phase transformation at temperatures less than 140°C, with the exception of water.
13.
The package authorized by this certificate is hereby approved for use under the general license provisions of 10 CFR 71.17.
14.
Expiration date: June 30, 2030.
U.S. NUCLEAR REGULATORY COMMISSION NRC FORM 618 (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES 1.
- a. CERTIFICATE NUMBER
- b. REVISION NUMBER
- c. DOCKET NUMBER
- d. PACKAGE IDENTIFICATION NUMBER PAGE PAGE S
9384 0
71-9384 USA/9384/B(U)-96 4
OF 4
REFERENCES Robatel Technologies, LLC, application, Revision No. 3, May 30, 2025.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION Yoira Diaz-Sanabria, Chief Storage and Transportation Licensing Branch Division of Fuel Management Office of Nuclear Material Safety and Safeguards Date: June 13, 2025 Signed by Diaz-Sanabria, Yoira on 06/13/25