NL-16-135, Report No. R-P1180, Wall Thickness Profile Sheet. (Sketch)

Report No. R-P1180, Wall Thickness Profile Sheet. (Sketch)

ML16293A499
Person / Time
Site:	Watts Bar
Issue date:	10/05/2016
From:	Tennessee Valley Authority
To:	Office of Nuclear Reactor Regulation
Shared Package
ML16293A318	List: CNL-16-135, Report No. R-P3450, Wall Thickness Profile Sheet. (Sketch) ML16293A323 ML16293A324 ML16293A325 ML16293A326 ML16293A327 ML16293A328 ML16293A329 ML16293A330 ML16293A331 ML16293A332 ML16293A333 ML16293A334 ML16293A336 ML16293A369 ML16293A370 ML16293A371 ML16293A372 ML16293A373 ML16293A374 ML16293A375 ML16293A376 ML16293A377 ML16293A378 ML16293A379 ML16293A380 ML16293A381 ML16293A382 ML16293A383 ML16293A384 ML16293A385 ML16293A386 ML16293A387 ML16293A388 ML16293A395 ML16293A396 ML16293A397 ML16293A399 ML16293A400 ML16293A401 ML16293A402 ML16293A403 ML16293A404 ML16293A405 ML16293A406 ML16293A407 ML16293A408 ML16293A409 ML16293A410 ML16293A411 ... further results
References
CNL-16-135 R-P1180
Download: ML16293A499 (3)

Text

• *

• TVA WALL THICKNESS REPORT NO: PROJECT: IAJB)J UNIT: Rec::ord Thickness Measurements As Indicated, Including Weld Width, Edge*To*Edge At o* Position O

• 9 o* 180" 2 7 o* PROFILE i' -Side CROWN HEIGHT:

CRQWN WIDTH:-----..::..*

7.::....;::;'tf

_____ _ PIPE ()" LEVEL: ___

DATE: 'IV A 19668 (NP*S-89)

SHEET WELD NO: 5.Z.F-D 194-IS' SYSTEM: srs *Weld Edge 5 r -Side DIAMETER:

_____ __,$.=*-=0'--------

WELD

______ _ FLOW IE£ -ri>e.

• 7eo111e4y.

Ci"Ui-. PAGE TVA PROJECT: __

SYSTEM: 5 I. 5 0.: Office of Nuclear Power UNIT: ;2.. WELD NO:

FL.t>W LEVEL: :JL DATE:

PAGE fa OF?

• WELD NUMBER Item 1 Item 2 Item 3 ltem4 Item 5 Item 6

• Item 7 Item 8 Item 9 Item 10 Item 11

• Watts Bar Unit 2 TVA Procedure N-GP-31 Attachments 3 & 4 Worksheet Version 1.0 dated 07/01/09 SIF-0194-15 Required examination Volume in sq. in. (width x height) Number of scan directions Total Scan volume in sq. in. Total length of weld Total required exam volume in cubic inches Exam volume acheived (sq. in.) in direction 1 X length of weld achieved Exam volume acheived (sq. in.) in direction 2 X length of weld achieved Exam volume acheived (sq. in.) in direction 3 X length of weld achieved Exam volume acheived (sq. in.) in direction 4 X length of weld achieved Determined the acheived exam volume add 6, 7, 8 & 9 Exam volume percentage item 1 O/item 5 x 100 No Scan #4,due to Tee cofiguration 0.25 0.3125 0 0.3125 0.3125 Measured Fields 1.25 0 27 \<_ .{YtlA'D sq. in. 41directions sq. in. 27linches , ':<'.'

,,l!4375 75. Initials JA Date 06/28/2010 cu. in. cu. In. cu. In. cu. In. cu. In. %