ML22059A992

From kanterella
Revision as of 17:57, 27 November 2024 by StriderTol (talk | contribs) (StriderTol Bot change)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Request for Pre-Submittal Meeting, STP ISFSI Exemption or Relief Request
ML22059A992
Person / Time
Site: 07201041
Issue date: 02/24/2022
From: Brostek W
South Texas
To: Dennis Galvin, Donald Habib
Storage and Transportation Licensing Branch
D HABIB NRC/NMSS/DFM/STLB 3014151035
References
Download: ML22059A992 (1)


Text

From:

Brost, Wendy To:

Habib, Donald Cc:

Galvin, Dennis

Subject:

[External_Sender] STP ISFSI - request for public call Date:

Thursday, February 24, 2022 5:01:27 PM Donald -

STP is requesting a call to discuss a planned emergent relief/exemption request related to a non-compliance with ASME code testing requirements for repaired welds. I spoke with our dry cask team, and they could be ready for a call as early as 3/7/22.

The vendor cannot find documentation to prove that 100% of the weld was inspected as required -

98% of the inspection was completed. Approximately 1 of the weld was not inspected as required.

The vendor is aware of where this 1 section is, and noted that it is not the area where the defect was found that required repair. This affects 4 of the casks as STP, one of which has already been loaded with fuel.

Currently, we are on a loading campaign movement hold. Our conclusion was that we couldnt lower the affected loaded MPC into its overpack with this question of code non-compliance open, so it is currently located in the hi-track transfer cask, contributing to higher dose in the area.

- Wendy Brost Supervisor, STPNOC Licensing