ML030710172

WCAP-16012, Rev. 0, Analysis of Capsule W-83 from Dominion Nuclear Connecticut Millstone Unit 2 Reactor Vessel Radiation Surveillance Program, Table of Contents - Section 8

ML030710172
Person / Time
Site:	Millstone
Issue date:	02/28/2003
From:	Conermann J, Gresham J, Ledger J, Wrights G Westinghouse
To:	Office of Nuclear Reactor Regulation
References
FOIA/PA-2005-0108 WCAP-16012 Rev 0
Download: ML030710172 (90)

Text

Westinghouse Non-Proprietary Class 3 WCAP-16012 February 2003 Revision 0 Analysis of Capsule W-83 from the Dominion Nuclear Connecticut Millstone Unit 2 Reactor Vessel Radiation Surveillance Program I('Westinghouse

WESTINGHOUSE NON-PROPRIETARY CLASS 3 WCAP-1 6012, Revision 0 Analysis of Capsule W-83 from the Dominion Nuclear Connecticut Millstone Unit 2 Reactor Vessel Radiation Surveillance Program J. H. Ledger G N. Wrights J. Conermann February 2003 Approved:

.A. Gresham, Manager Engineering & Materials Technology Westinghouse Electric Company LLC Energy Systems P.O. Box 355 Pittsburgh, PA 15230-0355

©2003 Westinghouse Electric Company LLC All Rights Reserved Millstone Unit 2 Capsule W-83

TABLE OF CONTENTS LIST OF TA B LES ........................................................................................................................................ iv LIST O F FIG U RE S ...................................................................................................................................... vi PR E FA CE ............................................................................................................................................ ix EXECUTIVE

SUMMARY

(OR) ABSTRACT ...................................................................................... x 1

SUMMARY

OF RESULTS .......................................................................................................... 1-1 2 INTRODUCTION ........................................................................................................................ 2-1 3 BACKGROUND ........................................................................................................................ 3-1 4 DESCRIPTION OF PROGRAM ................................................................................................. 4-1 5 TESTING OF SPECIMENS FROM CAPSULE W-83 ................................. 5-1 5.1 O V ERV IEW .................................................................................................................... 5-1 5.2 CHARPY V-NOTCH IMPACT TEST RESULTS .......................................................... 5-3 5.3 TENSILE TEST RESULTS ............................................................................................ 5-5 6 RADIATION ANALYSIS AND NEUTRON DOSIMETRY .................................................. 6-1

6.1 INTRODUCTION

........................................................................................................ 6-1 6.2 DISCRETE ORDINATES ANALYSIS ........................................................................... 6-2 6.3 NEUTRON DOSIMETRY .............................................................................................. 6-5 6.4 CALCULATION UNCERTAINTIES ............................................................................. 6-6 7 SURVEILLANCE CAPSULE REMOVAL SCHEDULE ....................................................... 7-1 8 REFEREN CES ............................................................................................................................. 8-1 APPENDIX A VALIDATION OF THE RADIATION TRANSPORT MODELS BASED ON NEUTRON DOSIMETRY MEASUREMENTS ................................................ A-0 APPENDIX B INSTRUMENTED CHARPY IMPACT TEST CURVES .................................. B-0 APPENDIX C CHARPY V-NOTCH PLOTS FOR EACH CAPSULE USING HYPERBOLIC TANGENT CURVE-FITTING METHOD ......................................................... C-0 APPENDIX D MILLSTONE UNIT 2 SURVEILLANCE PROGRAM CREDIBILITY ANALSIS .................................................................................. D-0 Millstone Unit 2 Capsule W-83

iv LIST OF TABLES Table 4-1 Chemical Composition of the Millstone Unit 2 Reactor Vessel Surveillance M aterials ..................................................................................................... 4-3 Table 4-2 Heat Treatment of the Millstone Unit 2 Reactor Vessel Surveillance Materials ...... 4-4 Table 4-3 Millstone Unit 2 Chemistry and Fluence Values ............................................................ 4-9 Table 5-1 Charpy V-Notch Data for the Millstone Unit 2 Shell Plate C506-1 Irradiated at 550'F, Fluence 1.74 x 1019 n/cm 2 (E > 1.0 MeV) Longitudinal ................. 5-6 Table 5-2 Charpy V-notch Data for the Millstone Unit 2 Shell Plate C506-1 Irradiated at 550 0T, Fluence 1.74 x 1019 n/cm2 (E > 1.0 MeV) Transverse ..................... 5-7 Table 5-3 Charpy V-notch Data for the Millstone Unit 2 Reactor Vessel Weld Data Irradiated at 5500F, Fluence 1.74 x 1019 n/cm 2 (E> 1.0 MeV) ........................................ 5-8 Table 5-4 Charpy V-notch Data for the Millstone Unit 2 Reactor Vessel Heat Affected Zone 2

(HAZ) Material Irradiated at 550T, Fluence 1.74 x 1019 n/cm (E> 1.0 MeV) .............. 5-9 Table 5-5 Instrumented Charpy Impact Test Results for the Millstone Unit 2 Reactor Vessel Shell Plate C506-1 Longitudinal Orientation .................................................... 5-10 Table 5-6 Instrumented Charpy Impact Test Results for the Millstone Unit 2 Reactor Vessel Shell Plate C506-1 Transverse Longitudinal ...................................................... 5-11 Table 5-7 Instrumented Charpy Impact Test Results for the Millstone Unit 2 Reactor Vessel Weld M aterial ..................................................................................................... 5-12 Table 5-8 Instrumented Charpy Impact Test Results for the Millstone Unit 2 Reactor Vessel Heat Affected Zone (HAZ) M etal ...................................................................... 5-13 Table 5-9 The Effect of 550 0F Irradiation at 1.74 x 1019 (E>1.0 MeV) on the Notch Toughness Properties of the Millstone Unit 2 Reactor Vessel Surveillance Capsule Materials ..... 5-14 Table 5-10 Comparison of the Millstone Unit 2 Reactor Vessel Surveillance Capsule Charpy Impact Test Results with Regulatory Guide 1.99 Revision 2 Predictions .................... 5-15 Table 5-11 Tensile Properties for Millstone Unit 2 Reactor Vessel Material Irradiated to 1.74 x 1019 n/cm2 (E> 1.0M eV ) .................................................................................... 5-16 Table 6-1 Calculated Neutron Exposure Rates and Integrated Exposures at the Surveillance Capsule Center .................................................................................... 6- 10 Millstone Unit 2 Capsule W-83

V LIST OF TABLES (Cont.)

Table 6-2 Calculated Maximum Neutron Exposure at the Pressure Vessel Clad/Base M etal Interface ............................................................................................................. 6-12 Table 6-3 Calculated Neutron Exposure of the Intermediate Shell to Lower Shell Circumferential Weld at the Clad/Base Metal Interface .............................................. 6-14 Table 6-4 Calculated Maximum Neutron Exposure of the Upper Shell to Intermediate Shell Circumferential Weld at the Clad/Base Metal Interface ............................................... 6-16 Table 6-5 Calculated Neutron Exposure at the Pressure Vessel Clad/Base Metal Interface Adjacent to the Core Barrel Holes ................................................................................ 6-17 Table 6-6 Relative Radial Distribution of Neutron Fluence (E>1.0 MeV) Within the R eactor Vessel Wall ....................................................................................................... 6-18 Table 6-7 Relative Radial Distribution of Iron Atom Displacements (dpa) Within the R eactor Vessel Wall ....................................................................................................... 6-18 Table 6-8 Calculated Fast Neutron Exposure of Surveillance Capsules Withdrawal from M illstone U nit 2 ............................................................................. *............................. 6-19 Table 6-9 Calculated Surveillance Capsule Lead Factors ............................................................. 6-19 Table 7-1 Millstone Unit 2 Reactor Vessel Surveillance Capsule Withdrawal Schedule ............... 7-1 Millstone Unit 2 Capsule W-83

vi LIST OF FIGURES Figure 4-1 Original Arrangement of Surveillance Capsules in the Millstone Unit 2 Reactor Vessel .......................................................................................................... 4-5 Figure 4-2 Typical Millstone Unit 2 Surveillance Capsule Assembly .............................................. 4-6 Figure 4-3 Typical Millstone Unit 2 Surveillance Capsule Charpy Impact Com partment A ssembly .................................................................................................. 4-7 Figure 4-4 Typical Millstone Unit 2 Tensile and Flux-Monitor Compartment Assembly ................ 4-8 Figure 5-1 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation) .............................................................................. 5-17 Figure 5-2 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation) ................................... 5-18 Figure 5-3 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation) ................................... 5-19 Figure 5-4 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation) ................................................................................. 5-20 Figure 5-5 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation) ...................................... 5-21 Figure 5-6 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation) ...................................... 5-22 Figure 5-7 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Weld Metal ......... 5-23 Figure 5-8 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Weld M etal ........................................................................................... 5-24 Figure 5-9 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel Weld M etal ........................................................................................... 5-25 Figure 5-10 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Shell Heat Affected Zone M aterial .................................................... :.................................... 5-26 Figure 5-11 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Heat Affected Zone Material ....................................................... 5-27 Figure 5-12 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Heat Affected Zone Material ....................................................... 5-28 Millstone Unit 2 Capsule W-83

vii LIST OF FIGURES (cont'd)

Figure 5-13 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation) ................................................ 5-29 Figure 5-14 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation) .................................................... 5-30 Figure 5-15 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Weld M etal ...................................................................................................... 5-31 Figure 5-16 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Weld HAZ Metal ..................................................... 5-32 Figure 5-17 Tensile Properties for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal O rientation) ........................................................................................... 5-33 Figure 5-18 Tensile Properties for Millstone Unit 2 Reactor Vessel Weld Metal ............................ 5-34 Figure 5-19 Tensile Properties for Millstone Unit 2 Reactor Vessel Heat Affected Zone Material. 5-35 Figure 5-20 Fractured Tensile Specimens for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation) ............................................................................. 5-36 Figure 5-21 Fractured Tensile Specimens from Millstone Unit 2 Reactor Vessel Surveillance W eld M etal ................................................................................................................... 5-37 Figure 5-22 Fractured Tensile Specimens for Millstone Unit 2 Reactor Vessel Surveillance H AZ M etal ................................................................................................................... 5-38 Figure 5-23 Engineering Stress-Strain curves for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1, 830 Capsule, Longitudinal Tensile Specimens IJC and lJ2 .......................... 5-39 Figure 5-24 Engineering Stress-Strain curves for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1, 83' Capsule, Longitudinal Tensile Specimens IJL ...................... 5-40 Figure 5-25 Engineering Stress-Strain curves for Millstone Unit 2 Reactor Vessel Weld Metal, 830 Capsule, Tensile Specimens 3K5 and 3K3 ............................................................. 5-41 Figure 5-26 Engineering Stress-Strain curves for Millstone Unit 2 Reactor Vessel Weld Metal, 830 Capsule, Tensile Specimens 3K7 ............................................................................ 5-42 Figure 5-27 Engineering Stress-Strain curves for Millstone Unit 2 Reactor Vessel HAZ, 830 Capsule, Tensile Specimens 4JU and 4JT ......................................................... 5-43 Figure 5-28 Engineering Stress-Strain curves for Millstone Unit 2 Reactor Vessel HAZ, 830 Capsule, Tensile Specimens 4KK .................................................................... 5-44 Millstone Unit 2 Capsule W-83

viii LIST OF FIGURES (cont'd)

Figure 6-1 Millstone Unit 2 rtheta Reactor Geometry at the Core Midplate ................................... 6-8 Figure 6-2 Millstone Unit 2 rz Reactor Geometry ........................................................................... 6-9 Millstone Unit 2 Capsule W-83

ix PREFACE This report has been technically reviewed and verified by:

Reviewer:

Sections 1 through 5, 7, 8, Appendices B, C and D T. J. Laubham G K. Roberts Section 6, Appendix A Millstone Unit 2 Capsule W-83

x EXECUTIVE

SUMMARY

The purpose of this report is to document the results of the testing of surveillance Capsule W-83 specimens and dosimeters from the Millstone Unit 2 reactor vessel. Capsule W-83 was removed at 15.3 EFPY and post irradiation mechanical testing of the Capsule W-83 Charpy V-notch and tensile specimens was performed along with a fluence evaluation. The surveillance Capsule W-83 fluence was 1.74 x 1019 nlcm 2 after 15.3 EFPY of plant operation. A brief summary of the Charpy V-notch testing results can be found in Section 1 and the updated capsule removal schedule can be found in Section 7. A supplement to this report is a credibility evaluation, which can be found in Appendix D, which shows the Millstone Unit 2 surveillance plate data is not credible, however the weld data is credible.

Millstone Unit 2 Capsule W-83

1-1 1

SUMMARY

OF RESULTS The analysis of the reactor vessel materials contained in surveillance Capsule W-83, the third capsule removed from the Millstone Unit 2 reactor pressure vessel, resulted in the following conclusions:

9 2 Capsule W-83 received an average fast neutron fluence (E>1.0 MeV) of 1.74 x 10' n/cm after 15.3 effective full power years (EFPY) of plant operation.

• Irradiation of the reactor vessel lower shell plate C-506-1 Charpy specimens, oriented with the longitudinal axis of the specimen parallel to the major working direction of the plate 2

(longitudinal orientation), to 1.74 x 10' 9 n/cm (E> 1.0MeV) resulted in a 30 ft-lb transition temperature increase of 119.12'F and a 50 ft-lb transition temperature increase of 140.1'F. This results in an irradiated 30 ft-lb transition temperature of 163.34'F and an irradiated 50 ft-lb transition temperature of 204.45°F for the longitudinally oriented specimens.

0 Irradiation of the reactor vessel lower shell plate C-506-1 Charpy specimens, oriented with the longitudinal axis of the specimen normal to the major working direction of the plate (transverse orientation), to 1.74 x10 19 n/cm 2 (E> 1.0 MeV) resulted in a 30 ft-lb transition temperature increase of 14 5 .7 8 CF and a 50 ft-lb transition temperature increase of 152.93'F. This results in an irradiated 30 ft-lb transition temperature of 164.18'F and an irradiated 50 ft-lb transition temperature of 205.13'F for transversely oriented specimens.

9 2 0 Irradiation of the weld metal Charpy specimens to 1.74 xl0' n/cm (E> 1.0MeV) resulted in a 30 ft-lb transition temperature increase of 56.09'F and a 50 ft-lb transition temperature increase of 76.96 0F. This results in an irradiated 30 ft-lb transition temperature of 23.94°F and an 0

irradiated 50 ft-lb transition temperature of 64.7 F.

to 1.74 x 1019 n/cm 2

• Irradiation of the weld Heat-Affected-Zone (HAZ) metal Charpy specimens (E> 1.0 MeV) resulted in a 50 ft-lb transition temperature increase of 43.18°F and a 50 ft-lb transition temperature increase of 52.58'F. This results in an irradiated 30 ft-lb transition temperature of 31.66 0 F and an irradiated 50 ft-lb transition temperature of 61.34°F.

The average upper shelf energy of the lower shell plate C-506-1 (longitudinal orientation) 9 2 resulted in an average energy decrease of 39 ft-lb after irradiation to 1.74 xlO' n/cm (E> 1.0 MeV). This results in an irradiated average upper shelf energy of 92 ft-lb for the longitudinally oriented specimens.

0 The average upper shelf energy of the lower shell plate C-506-1 (transverse orientation) resulted 2

in an average energy decrease of 24 ft-lb after irradiation to 1.74 x 1019 n/cm (E> 1.0 MeV).

Hence, this results in an irradiated average upper shelf energy of 84 ft-lb for the transversely oriented specimens.

0 The average upper shelf energy of the weld metal Charpy specimens resulted an average energy 9 2 decrease of 23 ft-lb after irradiation to 1.74 x101 n/cm (E> 1.0 MeV). Hence, this results in an irradiated average upper shelf energy of 109 ft-lb for the weld metal specimens.

Millstone Unit 2 Capsule W-83

1-2 The average upper shelf energy of the weld HAZ metal Charpy specimens resulted in an average energy decrease of 26 ft-lb after irradiation to 1.74 x10 1 9 n/cM2 (E> 1.0MeV). This results in an irradiated average upper shelf energy of 103 ft-lb for the weld HAZ metal.

A comparison of the Millstone Unit 2 reactor vessel beltline material test results with the Regulatory Guide 1.99, Revision 2[131 predictions (See Table 5-10) led to the following conclusions:

The measured 30 ft-lb shift in transition temperature of the Lower Shell Plate C-506-1 contained in Capsule 83 Longitudinal Orientation is less than the Regulatory Guide 1.99, Rev 2 predictions.

The measured 30 ft-lb shift in transition temperature of the Lower Shell Plate C-506-1 contained in Capsule 83 Transverse Orientation is greater than the Regulatory Guide 1.99, Rev 2 predictions. However, the shift value is within two sigma of the predicted value.

The measured 30 ft-lb shift in transition temperature of the Weld Metal contained in Capsule 83 is less than the Regulatory Guide 1.99, Rev 2 predictions.

The measured percent decrease in upper shelf energy (USE) of the Lower Shell Plate C-506-1 contained in Capsule 83 Longitudinal Orientation are in good agreement with the Regulatory Guide 1.99, Revision 2, predictions.

The measured percent decrease in upper shelf energy (USE) of the Lower Shell Plate C-506-1 contained in Capsule 83 Transverse Orientation and Weld Metal are less than the Regulatory Guide 1.99, Revision 2, predictions.

The surveillance capsule materials exhibit, adequate upper shelf energy level for continued safe plant operation and are expected to maintain an upper shelf energy of greater than 50 ft-lb throughout the life (32 EFPY) and life extension (48 EFPY) of the vessel as required by 10CFR50, Appendix G(

Millstone Unit 2 Capsule W-83

1-3 The peak calculated end-of-license (32 EFPY) and end-of-license renewal (48 EFPY) neutron fluence (E> 1.0 MeV) at the core midplane for the Millstone Unit 2 reactor vessel using the Regulatory Guide 1.99, Revision 2 attenuation formula (ie. Equation # 3 in the guide; f(deptlhx) fsurface

• e (.o 24xY)is as follows:

Calculated (32 EFPY): Vessel inner radius* = 2.40 x 1019 n/cm2 Vessel 1/4 thickness = 1.43 x 10'9 n/cm2 Vessel 3/4 thickness = 5.08 x 1018 n/cm2 2

Calculated (48 EFPY): Vessel inner radius* = 3.44 x 1019 n/cm Vessel 1/4 thickness = 2.05 x 1019 n/cm 2 Vessel 3/4 thickness = 7.28 x 1018 n/cm2

• Clad/base metal interface Millstone Unit 2 Capsule W-83

2-1 2 INTRODUCTION This report presents the results of the examination of Capsule W-83, the third capsule removed from the reactor in the continuing surveillance program which monitors the effects of neutron irradiation on the Dominion Nuclear Connecticut Millstone Unit 2 reactor pressure vessel materials under actual operating conditions.

The surveillance program for the Millstone Unit 2 reactor pressure vessel materials was designed and recommended by Combustion Engineering. A description of the surveillance program and the preirradiation mechanical properties of the reactor vessel materials is presented in CENPD-53, entitled "Summary Report on Manufacture of Test Specimens and Assembly of Capsules for Irradiation Surveillance of Millstone Point - Unit 2 Reactor Vessel Materials"l. The surveillance program was planned to cover the 40-year design life of the reactor pressure vessel and was based on ASTM E185-70, 114 "Standard Recommended Practice for Surveillance Tests for Nuclear Reactor Vessels' 4. Capsule W-83 was removed from the reactor after 15.3 EFPY of exposure and was shipped to the Westinghouse Science and Technology Center Hot Cell Facility, where the postirradiation mechanical testing of the Charpy V notch impact and tensile surveillance specimens was performed.

This report summarizes the analysis of the post-irradiation data obtained from surveillance Capsule W-83 removed from the Dominion Nuclear Connecticut Millstone Unit 2 reactor vessel and discusses the re analysis of the data. The data is also compared to capsules W-97 22 and W-l04 01 3 which were previously removed from the reactor.

Millstone Unit 2 Capsule W-83

3-1 3 BACKGROUND The ability of the large steel pressure vessel containing the reactor core and its primary coolant to resist fracture constitutes an important factor in ensuring safety in the nuclear industry. The beltline region of the reactor pressure vessel is the most critical region of the vessel because it is subjected to significant fast neutron bombardment. The overall effects of fast neutron irradiation on the mechanical properties of low alloy, ferritic pressure vessel steels such as SA533 Grade B Class I (base material of the Millstone Unit 2 reactor pressure vessel shell plate) are well documented in the literature. Generally, low alloy ferritic materials show an increase in hardness and tensile properties and a decrease in ductility and toughness under certain conditions of irradiation.

A method for ensuring the integrity of reactor pressure vessels has been presented in "Fracture Toughness Criteria for Protection Against Failure," Appendix G to Section XI of the ASME Boiler and Pressure Vessel Codet41. The method uses fracture mechanics concepts and is based on the reference nil-ductility transition temperature (RTNDT).

RTNDT is defined as the greater of either the drop weight nil-ductility transition temperature (NDTT per ASTM E-208t"') or the temperature 60'F less than the 50 ft-lb (and 35-md lateral expansion) temperature as determined from Charpy specimens oriented normal (transverse) to the major working direction of the plate. The RTNDT of a given material is used to index that material to a reference stress intensity factor curve (KI, curve) which appears in Appendix G to the ASME Code. The K1 , curve is a lower bound of static fracture toughness results obtained from several heats of pressure vessel steel. When a given material is indexed to the K1c curve, allowable stress intensity factors can be obtained for this material as a function of temperature. Allowable operating limits can then be determined using these allowable stress intensity factors.

RTNDT and, in turn, the operating limits of nuclear power plants can be adjusted to account for the effects of radiation on the reactor vessel material properties. The radiation embrittlement changes in mechanical properties of a given reactor pressure vessel steel can be monitored by a reactor surveillance program, such as the Millstone Unit 2 reactor vessel radiation surveillance program"), in which a surveillance capsule is periodically removed from the operating nuclear reactor and the encapsulated specimens tested. The increase in the average Charpy V-notch 30 ft-lb temperature (ARTNDT) due to irradiation is added to the initial RTNDTtO adjust the RTNDT for radiation embrittlement. This RTNDT (RTNDT initial +

ARTNDT) is used to index the material to the KI, curve and, in turn, to set operating limits for the nuclear power plant that take into account the effects of irradiation on the reactor vessel materials.

Millstone Unit 2 Capsule W-83

4-1 4 DESCRIPTION OF PROGRAM Six surveillance capsules for monitoring the effects of neutron exposure on the Millstone Unit 2 reactor pressure vessel core region material were inserted in the reactor vessel prior to initial plant startup. The capsules were positioned in the reactor vessel between the thermal shield and the vessel wall at locations shown in Figure 4-1. Since time of installation, the thermal shield has been removed. The vertical center of the capsules is opposite the vertical center of the core. The capsules contain specimens made from Lower Shell Plate C-506-1 (Heat No. C-5667-1), weld metal fabricated with Mil B-4 weld filler wire heat numbers 10137 and 90136 Linde 0091, which is identical to that used in the actual fabrication of the intermediate to lower shell plates circumferential beltline weld.

The surveillance heat-affected-zone (HAZ) material was fabricated by welding together sections of plate C-506-1 and C-506-3 in the same manner as the surveillance weld material with the same post weld heat treatment. Standard Reference Material (SRM) was included in the Millstone Unit 2 Surveillance Program but not included within Capsule W-83.

The chemistry and heat treatment of the surveillance material are presented in Table 4-1 and Table 4-2, respectively. The chemical analyses reported in table 4-1 were obtained from unirradiated material used in the surveillance program.

All test specimens were machined from the /4 thickness location. Test specimens represent material taken at least one plate thickness from the quenched end of the plate. All base material Charpy V-notch impact and tensile specimens were oriented with the longitudinal axis of the specimen both normal to (transverse orientation) and parallel to (longitudinal orientation) the principal working direction of the plate. Charpy V-notch specimens from the weld metal were oriented with the longitudinal axis of the specimens transverse to the weld direction. Tensile specimens were oriented with the longitudinal axis of the specimens normal to the welding direction.

Capsule W-83 contained dosimeters of Sulfur, Iron, Copper (shielded), Nickel (shielded) and Cobalt (shielded and unshielded).

Thermal monitors were made from two low-melting eutectic alloys and sealed in Pyrex tubes that were included in the capsule and were located as shown in Figure 4-2. The two eutectic alloys and their melting points are:

80% Au, 20% Sn Melting Point 536F (280C) 90% Pb, 5% Sn, 5% Ag Melting Point 558F (292C) 2.5% Ag, 97.5% Pb Melting Point 580F (304C) 1.75% Ag, 0.75% Sn, 97.5% Pb Melting Point 590F (31 OC)

Millstone Unit 2 Capsule W-83

4-2 The arrangement of the various mechanical test specimens, dosimeters and thermal monitors contained in Capsule W-83 are shown in Figure 4-2. A typical Millstone Unit 2 surveillance capsule Charpy impact compartment assembly is shown in Figure 4-3. A typical sureillance capsule tensile and flux-monitor compartment assembly is shown in Figure 4-4.

Millstone Unit 2 Capsule W-83

4-3 Materials 4-3 Chemical Composition of the Millstone Unit 2 Reactor Vessel Surveillance 121 Table 4-1 Element Plate C-506-1 1A T - ID Weld 1A T - OD Weld (Heat C-5567-1) C-506-2 /C-506-31 ' C-506-2/C-506-3(b)

Si 0.12 0.17 0.15 S 0.014 0.013 0.013 P 0.006 0.015 0.016 Mn 1.26 1.13 1.13 C 0.21 0.12 012 Cr 0.10 0.04 0.05 Ni 0.61 0.06 0.06 Mo 0.62 0.54 0.53 V 0.004 0.006 0.007 Cb <0.01 <0 01 <0 01 B 0.0006 0.0003 0.0003 Co 0.011 0.009 0.009 Cu 0 14 0.30 0.21 A] 0.020 <0 001 <0.001 W <0.01 001 <0 01 Ti <0.01 <0.01 <0.01 As 0.011 0.011 0.012 Sn 0.009 0.004 0.003 Zr 0.002 0.002 0.002 N2 0.009 0.008 0009 Notes:

a) Mil B-4 wire heat 90136, Linde 0091 Flux Lot 3998 b) Mil B-4 wire heat 10137, Linde 0091 Flux Lot 3999 Millstone Unit 2 Capsule W-83

4-4 Table 4-2 Heat Treatment of the Millstone Unit 2 Reactor Vessel Surveillance Materials Material Temperature (0F) Time (hr) Coolant Austenitizing:

1600+/- 50 4 Water quenched Intermediate Shell Plate Tempering: 4 Furnace Cooled C-506-1 1225+/-25 Stress Relief: 40 Furnace Cooled 1150+/- 25 to 600OF Weldment Post Weld Stress Relief: 40 Furnace Cooled 1150+/- 25 to 600°F Millstone Unit 2 Capsule W-83

4-5 1800

,r ' .,Outlet Nozzle

/

~ I Vessel Capsule Assembly Enlarged Plan View 00 Elevation Figure 4-1 Original Arrangement of Surveillance Capsules in the Millstone Unit 2 Reactor Vessel Millstone Unit 2 Capsule IV-83

4-6 I Lock Assembly

,0 Tensile -Monitor

} Wedge Coupling Assembly Compartment Charpy Impact Compartments Tensile -Monitor Compartment Charpy Impact Compartments Tensile -Monitor Compartment Figure 4-2 Typical Millstone Unit 2 Surveillance Capsule Assembly Millstone Unit 2 Capsule IV-83

4-7 Coupling - End Cap Charpy Impact Specimens Tubing Coupling - End Cap Figure 4-3 Typical Millstone Unit 2 Surveillance Capsule Charpy Impact Compartment Assembly Millstone Unit 2 Capsule W-83

4-8 Wedge Coupling - End Cap Flux Spectrum Monitor Cadmium Shielded Flux Monitor Housing

-Stainless Steel Tubing Stainless Steel Tubing, -Cadmium Shield Threshold Detector "1Threshold Detector "Weight Low Melting Alloy Housing Tensile Specimen Tensile Specimen Housing

-Rectangular Tubing Wedge Coupling - End Cap Figure 4-4 Typical Millstone Unit 2 Tensile and Flux-Monitor Compartment Assembly Millstone Unit 2 Capsule W-83

4-9 Table 4-3 Millstone Unit 2 Chemistry and Fluence Values Inside Surface Fluence Chemical Beltline Region Fabrication Material Code / x Composition(c) Chemistry Initial Location Factor (a) RTNDCT Heat No. 32 48 54 Cu % Ni %

C-505-1 / C5843-1 2.40 3.44 3.83 0.13 0.61 91.3 8.1 Intermediate Pla Shell te Shell C-505-2 / C5843-2 2.40 3.44 3.83 0.13 0.62 91.5 17.5 Plate SA533, Gr B C-505-3 / C5843-3 2.40 3.44 3.83 0.13 0.62 91.5 5.0 C-506-1 / C5667-1 2.38 3.40 3.78 0.15 0.60 110 7.0 Lower Shell Lower3ShGlB C-506-2 / C5667-2 2.38 3.40 3.78 0.15 0.61 110 -33.7 SA5433, Gr B C-506-3 / C5667-3 2.38 3.40 3.78 0.14 0.66 101.5 -19.2 9-203 / 10137 - 2.38 3.40 3.78 0.22 0.04 100 -56.3 Mid. 3999 Circumferential Weld Linde 0091 9-203 / 10136 - 2.38 3.40 3.78 0.27 0.07 124.3 -56.3 3998 Intermediate 2-203-A / A8746 Longitudinal 2.40 3.44 3.83 0.15 0.13 77.7 -56.0 Welds Linde 124 Intermediate 2-203-B,-C Longitudinal A8746 - 3878 1.56 2.27 2.53 0.15 0.13 77.7 -56.0 Welds Linde 124 LowerLower 3-203-A / A8746 Longitudinal 3 878 2.38 3.40 3.83 0.15 0.13 77.7 -56.0 3878 Welds Linde 124 Lower Longiudna Logtuia 3-203-B- -3878 A8746 ,-CI WLdsguinA 3 1.54 2.24 2.50 0.15 0.13 77.7 -56.0 Welds Linde 12411 1 1111 Notes:

(a) RTNDT calculated per Regulatory Guide 1.99, Revision 2 (b) See Section 6, Table 6-4 (c) See Reference 21 Millstone Unit 2 Capsule W-83

5-1 5 TESTING OF SPECIMENS FROM CAPSULE W-83 5.1 OVERVIEW The post-irradiation mechanical testing of the Charpy V-notch and tensile specimens was performed at the Westinghouse Science and Technology Department Laboratory with consultation by Westinghouse 6t Energy Systems personnel. Testing was performed in accordance with IOCFR50, Appendices G and HE ,

ASTM Specification El85-82t71, and Westinghouse Remote Metallographic Facility (RMF) Procedure RMF 8402, Revision 2 as modified by Westinghouse RMF Procedures 8102, Revision I and 8103, Revision 1.

Upon receipt of the capsule at the hot cell laboratory, the capsule was visually examinated and photographed for identification purposes. The specimens and spacer blocks were carefully removed, inspected for identification number, and checked against the master list in CENDP-53t". No discrepancies were found.

Examination of the four low-melting point eutectic alloys indicated that the 1 inch and 1.25 inch monitors melted. Based on this examination, the maximum temperature to which the test specimens were exposed was less than 304'C (580'F).

8 RMF Procedure 8103, The Charpy impact tests were performed per ASTM Specification E23-98"' and Charpy impact test Revision 1, on a Tinius-Olsen Model 74, 358J machine. The tup (striker) of the machine is instrumented with an Instron Dynatup Impulse instrumentation system, feeding into an IBM compatible computer. With this system, load-time and energy-time signals can be recorded in addition to the standard measurement of Charpy energy (ED). From the load-time curve (Appendix A), the load of general yielding (Pty), the time to general yielding (tGy), the maximum load (Pm), and the time to maximum load (tNt) can be determined. Under some test conditions, a sharp drop in load indicative of fast fracture was observed. The load at which fast fracture was initiated is identified as the fast fracture load (PF), and the load at which fast fracture terminated is identified as the arrest load (PA).

The energy at maximum load (ErI) was determined by comparing the energy-time record and the load time record. The energy at maximum load is approximately equivalent to the energy required to initiate a crack in the specimen. Therefore, the propagation energy for the crack (Ep) is the difference between the total energy to fracture (ED) and the energy at maximum load (ENI).

The yield stress (ay) was calculated from the three-point bend formula having the following expression:

o;=(Pcr*L) / [B *(W - a )2

• C]()

where: L = distance between the specimen supports in the impact machine B = the width of the specimen measured parallel to the notch W = height of the specimen, measured perpendicularly to the notch a = notch depth Millstone Unit 2 Capsule W-83

5-2 The constant C is dependent on the notch flank angle (0), notch root radius (p) and the type of loading (i.e., pure bending or three-point bending). In three-point bending, for a Charpy specimen in which 4=

450 and p = 0.010 inch, Equation 1 is valid with C = 1.21. Therefore, (for L = 4W),

S=(PGy*L) / [B * (W- a) 2 *1.21 = (3.33 *PGy

• W) / [B *(W - a) 2] (2)

For the Charpy specimen, B = 0.394 inch, W = 0.394 inch and a = 0.079 inch. Equation 2 then reduces to:

S=33.3 *PGy (3) where aGy is in units of psi and PGy is in units of lbs. The flow stress was calculated from the average of the yield and maximum loads, also using the three-point bend formula.

The symbol A in columns 4, 5, and 6 of Tables 5-5 through 5-8 is the cross-section area under the notch of the Charpy specimens:

A = B * (W - a) = 0.1241 sq.in. (4)

Percent shear was determined from post-fracture photographs using the ratio-of-areas methods in compliance with ASTM Specification A370-97a' 91 . The lateral expansion was measured using a dial gage rig similar to that shown in the same specification.

Tensile tests were performed on a 20,000-pound Instron, split-console test machine (Model 1115) per ASTM Specification E8-99" 0 ' and E21-92"", and RMF Procedure 8102, Revision 1 All pull rods, grips, and pins were made of Inconel 718. The upper pull rod was connected through a universal joint to improve axiality of loading. The tests were conducted at a constant crosshead speed of 0 05 inches per minute throughout the test.

Extension measurements were made with a linear variable displacement transducer (LVDT) extensometer. The extensometer knife edges were spring-loaded to the specimen and operated through specimen failure. The extensometer gage length was 1 00 inch. The extensometer is rated Class B-2 per ASTM E-83-93'1 5 .

Elevated test temperatures were obtained with a three-zone electric resistance split-tube furnace with a 9 inch hot zone. All tests were conducted in air.

Because of the difficulty in remotely attaching a thermocouple directly to the specimen, the following procedure was used to monitor specimen temperatures. Chromel-Alumel thermocouples were inserted in shallow holes in the center and each end of the gage section of a dummy specimen and in each grip. In test configuration, with a slight load on the specimen, a plot of specimen temperature versus upper and lower grip and controller temperatures was developed over the range room temperature to 550'F (288°C). The upper grip was used to control the furnace temperature. During the actual testing, the grip temperatures were used to obtain desired specimen temperatures. Experiments have indicated that this method is accurate to +2°F.

Millstone Umt 2 Capsule W-83

5-3 The yield load, ultimate load, fracture load, total elongation, and uniform elongation were determined directly from the load-extension curve. The yield strength, ultimate strength, and fracture strength were calculated using the original cross-sectional area. The final diameter and final gage length were determined from post-fracture photographs. The fracture area used to calculate the fracture stress (true stress at fracture) and percent reduction in area was computed using the final diameter measurement.

5.2 CHARPY V-NOTCH IMPACT TEST RESULTS The results of the Charpy V-notch impact tests performed on the various materials contained in Capsule W-83 irradiated to approximately 1.74 xl 019 n/cm 2 after 15.3 EFPY are presented in Tables 5-1 through 5-8 and Figures 5-1 through 5-12. The transition temperature increases and upper shelf energy decreases for the Capsule W-83 material are shown in Table 5-10.

• Irradiation of the reactor vessel lower shell plate C-506-1 Charpy specimens, oriented with the longitudinal axis of the specimen parallel to the major working direction of the plate (longitudinal orientation), to 1.74 xl0' 9 n/cm2 (E> 1.0MeV) resulted in a 30 ft-lb transition temperature increase of 119.12'F and a 50 ft-lb transition temperature increase of 140.1°F. This results in an irradiated 30 ft-lb transition temperature of 163.34°F and an irradiated 50 ft-lb transition temperature of 204.45°F for the longitudinally oriented specimens.

• Irradiation of the reactor vessel lower shell plate C-506-1 Charpy specimens, oriented with the longitudinal axis of the specimen normal to the major working direction of the plate (transverse orientation), to 1.74 x10 19 n/cm 2 (E> 1.0 MeV) resulted in a 30 ft-lb transition temperature 0

increase of 145.78°F and a 50 ft-lb transition temperature increase of 152.93 F. This results in an irradiated 30 ft-lb transition temperature of 164.18'F and an irradiated 50 ft-lb transition temperature of 205.13'F for transversely oriented specimens.

9 2 Irradiation of the weld metal Charpy specimens to 1.74 x 101 n/cm (E> 1.0MeV) resulted in a 30 ft-lb transition temperature increase of 56.09'F and a 50 ft-lb transition temperature increase of 76.96 0F. This results in an irradiated 30 ft-lb transition temperature of 23.94°F and an irradiated 50 ft-lb transition temperature of 64.7°F.

xl01 9 n/cm 2 0 Irradiation of the weld Heat-Affected-Zone (HAZ) metal Charpy specimens to 1.74 (E> 1.0 MeV) resulted in a 30 ft-lb transition temperature increase of 43.18'F and a 50 ft-lb transition temperature increase of 52.58°F. This results in an irradiated 30 ft-lb transition temperature of 31.66°F and an irradiated 50 ft-lb transition temperature of 61.34°F.

• The average upper shelf energy of the lower shell plate C-506-1 (longitudinal orientation) 9 2 resulted in an average energy decrease of 39 ft-lb after irradiation to 1.74 x101 n/cm (E> 1.0 MeV). This results in an irradiated average upper shelf energy of 92 ft-lb for the longitudinally oriented specimens.

0 The average upper shelf energy of the lower shell plate C-506-1 (transverse orientation) resulted 9 2 in an average energy decrease of 24 ft-lb after irradiation to 1.74 x101 n/cm (E> 1.0 MeV).

Hence, this results in an irradiated average upper shelf energy of 84 ft-lb for the transversely oriented specimens.

Millstone Unit 2 Capsule W-83

5-4 The average upper shelf energy of the weld metal Charpy specimens resulted an average energy decrease of 23 ft-lb after irradiation to 1.74 x101 9 n/cm-' (E> 1.0 MeV). Hence, this results in an irradiated average upper shelf energy of 109 ft-lb for the weld metal specimens.

• The average upper shelf energy of the weld HAZ metal Charpy specimens resulted in an average energy decrease of 26 ft-lb after irradiation to 1.74 xl0' 9 n/cm2 (E> 1.0MeV). This results in an irradiated average upper shelf energy of 103 ft-lb for the weld HAZ metal.

A comparison of the Millstone Unit 2 reactor vessel beltline material test results with the Regulatory Guide 1.99, Revision 2E'"I predictions (See Table 5-10) led to the following conclusions:

The measured 30 ft-lb shift in transition temperature of the Lower Shell Plate C-506-1 contained in Capsule 83 Longitudinal Orientation is less than the Regulatory Guide 1.99, Rev 2 predictions.

The measured 30 ft-lb shift in transition temperature of the Lower Shell Plate C-506-1 contained in Capsule 83 Transverse Orientation is greater than the Regulatory Guide 1.99, Rev 2 predictions. However, the shift value is less than two sigma of the predicted value.

The measured 30 ft-lb shift in transition temperature of the Weld Metal contained in Capsule 83 is less than the Regulatory Guide 1.99, Rev 2 predictions.

The measured percent decrease in upper shelf energy (USE) of the Lower Shell Plate C-506-1 contained in Capsule 83 Longitudinal Onentation are in good agreement with the Regulatory Guide 1.99, Revision 2, predictions.

The measured percent decrease in upper shelf energy (USE) of the Lower Shell Plate C-506-1 contained in Capsule 83 Transverse Orientation and Weld Metal are less than the Regulatory Guide 1.99, Revision 2, predictions.

The surveillance capsule materials exhibit a more than adequate upper shelf energy level for continued safe plant operation and are expected to maintain an upper shelf energy of greater than 50 ft-lb throughout the life (32 EFPY) and life extension (48 EFPY) of the vessel as required by 10CFR50, Appendix G, The Fracture appearance of each irradiated Charpy specimen from the various materials is shown in Figures 5-13 through 5-16 and shows an increasingly ductile or tougher appearance with increasing test temperature.

Millstone Unit 2 Capsule W-83

5-5 5.3 TENSILE TEST RESULTS The results of the tensile tests performed on the various materials contained in Capsule W-83 irradiated to 1.74 x 10i'9 ncm2 (E>l.0MeV) are presented in Table 5-11 and are compared with unirradiated results as shown in Figures 5-17, 5-18 and 5-19.

The results of the tensile tests performed on the Lower Shell Plate C-506-1 (Longitudinal Orientation) indicate that irradiation to 1.74 x 1019 n/cm 2 (E>1.0 MeV) caused an 16 to 18 ksi increase in 0.2 percent yield strength and approximately a 14 to 20 ksi increase in the ultimate tensile strength when compared to unirradiated data (Figure 5-17).

The results of the tensile tests performed on the surveillance weld indicate that irradiation to 1.74 x 1019 n/cm 2 (E>1.0 MeV) caused an 4 to 13 ksi increase in 0.2 percent yield strength and approximately a 14 to 16 ksi increase in the ultimate tensile strength when compared to unirradiated data (Figure 5-18).

The results of the tensile tests performed on the Heat Affected Zone Metal indicate that irradiation to 1.74 x 10'9 n/cm2 (E>1.0 MeV) caused an 11 to 16 ksi increase in 0.2 percent yield strength and approximately a 12 to 14 ksi increase in the ultimate tensile strength when compared to unirradiated data (Figure 5-19).

The fractured tension specimens for each of the materials are shown in Figures 5-20, 5-21 and 5-22. A typical stress-strain curve for the tension specimens is shown in Figures 5-22 through 5-28.

Millstone Unit 2 Capsule W-83

5-6 Table 5-1 Charpy V-notch Impact Data for the Millstone Unit 2 Reactor Vessel Shell Plate C506-1 Irradiated at 5500F, Fluence 1.74 xl019 n/cm 2 (E> 1.0 MeV) Longitudinal Orientation Sample Temperature Impact Energy Lateral Expansion Shear Number F C ft-lbs Joules mils mm  %

132 0 -18 3 4 0 000 2 146 75 24 12 16 7 0 18 10 117 130 54 32 43 25 064 25 13C 175 79 23 31 20 051 40 121 175 79 35 47 32 081 35 136 200 93 32 43 28 071 35 156 215 102 67 91 52 1.32 65 165 225 107 74 100 58 1.47 85 131 250 121 60 81 48 1.22 60 12K 300 149 80 108 68 1.73 100 126 325 163 95 129 72 1.83 100 16D 350 177 102 138 80 203 100 Millstone Unit 2 Capsule W-83

5-7 Table 5-2 Charpy V-notch Impact Data for the Millstone Unit 2 Reactor Vessel Shell Plate C506-1 2

Irradiated at 550%F, Fluence 1.74 xl09 n/cm (E> 1.0 MeV) Transverse Orientation Sample Temperature Impact Energy Lateral Expansion Shear Number F C ft-lbs Joules mils mm  %

224 0 -18 5 7 1 0.03 2 231 75 24 15 20 9 0.23 10 21L 130 54 17 23 14 0.36 15 253 150 66 38 52 30 0.76 40 213 150 66 24 33 21 0.53 30 245 175 79 27 37 23 0.58 35 212 175 79 32 43 27 0.69 40 211 200 93 37 50 30 0.76 40 23L 225 107 65 88 52 1.32 70 214 275 135 77 104 60 1.52 100 24K 300 149 83 113 65 1.65 100 22A 325 163 92 125 73 1.85 100 Millstone Unit 2 Capsule W-83

5-8 Table 5-3 Charpy V-notch Impact Data for the Millstone Unit 2 Reactor Vessel Weld Data Irradiated at 550'F, Fhuence 1.74 x10 1 9 nlcm 2 (E> 1.0 MeV)

Sample Temperature Impact Energy Lateral Expansion Shear Number F C fl-lbs Joules mils mm  %

314 -50 -46 8 11 1 003 10 33K 0 -18 9 12 6 015 15 34L 30 -1 27 37 23 058 30 311 50 10 45 61 36 0.91 40 32A 75 24 68 92 50 1.27 65 36D 100 38 76 103 54 1.37 80 36E 125 52 83 113 64 1 63 90 34C 150 66 76 103 60 152 85 337 200 93 84 114 66 1 68 95 323 225 107 109 148 80 203 100 336 250 121 101 137 73 1.85 100 312 250 121 117 159 84 2.13 100 Millstone Unit 2 Capsule W-83

5-9 Table 5-4 Charpy V-notch Impact Data for the Millstone Unit 2 Reactor Vessel Heat Affected 9 2 Zone (HAZ) Metal Data Irradiated at 550'F, Fluence 1.74 xl1O' n/cm (E> 1.0 MeV)

Sample Temperature Impact Energy Lateral Expansion Shear Number F C ft-lbs Joules mils mm  %

42T -75 -59 7 9 1 0.03 10 46E -25 -32 18 24 9 0.23 15 42P 0 -18 13 18 6 0.15 20 41E 25 -4 34 46 21 0.53 30 41T 50 10 49 66 31 0.79 45 42U 75 24 24 33 17 043 30 427 100 38 '102 138 57 1.45 85 43K 150 66 94 127 56 1.42 80 41U 200 93 122 165 71 1.80 90 46B 250 121 95 129 66 1.68 100 45K 300 149 88 119 60 1.52 100 44C 325 163 126 171 76 1.93 100 Millstone Unit 2 Capsule W-83

5-10 Normalizedl Energies

'rest Charpy Yield Time to Maximum Time to Fracture Arrest Yield Flow Sample Temp Energy (ft-lb/rn) Load Yield Load Maximum Load Load Stress Stress (OF) (ft-Il)) Charpy Maximum Prop (kips) (pusec) (kips) (plsec) (kips) (kips) (ksi) (ksi)

Ed/A Em/A Ep/A 132 0 3 24 13 11 1633 010 1701 012 1691 0 54 56 146 75 12 97 53 44 3179 014 3995 0.20 3983 0 106 119 117 130 32 258 187 71 3092 0.14 4038 047 4002 373 103 119 13C 175 23 185 58 127 2866 0.13 3679 0.21 3584 927 95 109 121 175 35 282 191 91 2998 0 14 4032 048 3986 900 100 117 136 200 32 258 165 93 2941 0.14 3873 0.44 3861 878 98 113 156 215 67 540 286 254 3065 0.14 4122 0.66 4071 2338 102 120 165 225 74 596 213 383 2922 0.14 4048 0.53 3963 2694 97 116 131 250 60 483 215 269 2983 0.14 4098 0.52 4035 2396 99 118 12K 300 80 645 205 439 2858 0 14 3909 052 n/a n/a 95 113 126 325 95 765 278 487 2809 0.14 4015 0.67 n/a n/a 94 114 16D 350 102 822 280 542 2824 0.14 4020 067 n/a n/a 94 114 Millstone Unit 2 Capsule W-83

5-11 Table 5-6 Instrumented Charpy Impact Test Results for Millstone Unit 2 Reactor Vessel Shell Plate C506-1 Transverse Orientation Test Cliarpy Normalized Energies Yield Time to Maximum Time to Fracture Arrest Yield Flow 2 Yield Load Maximum Load Load Stress Stress Sample Temp Energy (ft-lb/in ) Load Number (OF) (ft-li)) Charpy Maximum Prop (kips) (psec) (kips) (Psec) (kips) (kips) (ksi) (ksi)

Ed/A Em/A Ep/A 224 0 5 40 21 19 2605 0.13 2658 0.14 2653 0 87 88 231 75 15 121 68 53 3139 0.14 4094 0.23 4094 0 105 120 21L 130 17 137 58 79 3048 0.14 3815 0.21 3795 650 102 114 253 150 38 306 172 134 3102 0.14 4124 043 4102 1163 103 120 213 150 24 193 115 78 2937 0.14 3745 0.33 3721 762 98 I11 245 175 27 218 115 103 2902 0.14 3778 0.33 3751 1251 97 111 212 175 32 258 142 116 2980 0.14 3859 0.39 3825 1046 99 114 211 200 37 298 144 154 2887 0.14 3831 0.39 3822 1372 96 112 23L 225 65 524 213 310 3021 0.15 4149 0.52 3926 1188 101 119 214 275 77 620 200 421 2855 0.14 3993 0.51 n/a n/a 95 114 24K 300 83 669 210 459 2993 0.15 4105 0.51 n/a n/a 100 118 22A 325 92 741 212 529 2878 0.15 4074 0.53 n/a n/a 96 116 Millstone Unit 2 Capsule W-83

5-12 Table 5-7 Instrumented Charpy Impact Test Results for Millstone Unit 2 Reactor Vessel Weld Metal Test Charpy Normalized Energies 2 Yield Time to Maximum Time to Fracture Arrest Yield Flow Sample Temp Energy(ftl/in ) Load Yield Load Maximum Load Load Stress Stress (TF) (ft-lb) Charpy Maximum Prop (kips) (pjsec) (kips) (ptsec) (kips) (kips) (ksi) (ksi)

Ed/A Em/A Ep/A ......

314 -50 8 64 34 31 3444 0.16 3444 0 16 3439 0 115 115 33K 0 9 73 37 35 3561 0 15 3634 0.17 3624 0 119 120 34L 30 27 218 64 153 3500 0 15 4240 021 4014 793 117 129 311 50 45 363 219 144 3354 0 15 4172 0.51 4075 910 112 125 32A 75 68 548 220 328 3393 0.15 4228 051 3634 1394 113 127 36D 100 76 612 221 392 3297 0 14 4177 0.51 3789 1881 110 124 36E 125 83 669 216 453 3205 0,14 4109 052 3797 2508 107 122 34C 150 76 612 218 394 3171 0 15 4057 0.53 3832 2236 106 120 337 200 84 677 208 469 3039 0 14 3940 051 n/a n/a 101 116 323 225 109 878 289 589 3053 0.14 3993 068 n/a n/a 102 117 "336 250 101 814 287 527 2989 0 14 4001 0.67 n/a n/a 100 116 312 250 117 943 288 655 3016 0.15 4048 067 Ln/a n/a 100 118 Millstone Unit 2 Capsule W-83

5-13 Table 5-8 Instrumented Charpy Impact Test Results for Millstone Unit 2 Reactor Vessel Heat Affected Zone (IIAZ) Metal Test Charpy Normalized Energies Yield Time to Maximum Time to Fracture Arrest Yield Flow Sample Temp Energy (ft-lb/in 2 ) Load Yield Load Maximum Load Load Stress Stress Number (OF) (ft-lb) Charpy Maximum Prop (kips) (psec) (kips) (psec) (kips) (kips) (ksi) (ksi)

Ed/A Em/A Ep/A I I 42T -75 7 56 32 25 3489 0.15 3489 0.15 3470 0 116 116 46E -25 18 145 73 72 3917 0.16 4608 022 4444 0 130 142 42P 0 13 105 58 47 3722 0.15 4343 0.2 4341 0 124 134 41E 25 34 274 167 107 3531 0.14 4396 0.39 4381 976 118 132 41T 50 49 395 248 147 3457 0.16 4544 054 4456 1072 115 133 42U 75 24 193 69 124 3440 0.14 4270 022 3884 1112 115 128 427 100 102 822 330 492 3472 0.15 4500 0.69 3358 380 116 133 43K 150 94 757 309 448 3353 0.15 4339 0.67 3491 697 112 128 41 U 200 122 983 322 661 3308 0.15 4412 0.69 1328 376 110 129 46B 250 95 765 300 466 3157 0.15 4216 0.67 n/a n/a 105 123 45K 300 88 709 227 482 3001 0.15 4183 0.55 n/a n/a 100 120 44C 325 126 1015 303 712 3081 0.14 4262 0.68 n/a n/a 103 122 Millstone Unit 2 Capsule W-83

5-14 Table 5-9 The Effect of 550TF Irradiation at 1.74 xl019 n/cm 2 (E>I.0 MeV) on the Notch Toughness Properties of the Millstone Unit 2 Reactor Vessel Surveillance Capsule Materials Average 30 (ft-lb) Average 35 mil Lateral Average 50 ft-lb Average Energy Absorption Material Transition Temperature (TF) Expansion Temperature (TF) Transition Temperature (TF) at Full Shear (ft-ilb)

Uni.radiicd Irradiated AT Umrradia(cd Irradiatcd AT Uninadiated Inadiamed AT Unirradiated Irradiated AE Plate C-506-1 44.22 16334 119.12 44.98 191 3 14632 64,35 204.45 140 1 131 92 -39 (Longitudinal)

Plate C-506-1 18.4 164.18 14578 2464 196.84 172.19 522 205 13 152.93 108 84 -24 (Transverse)

Weld Metal -32.15 23.94 5609 -24 52 55,28 79,8 -12 25 64.7 76.96 132 109 -23 IIAZ Mctal -11 52 31 66 43.18 072 754 7468 8.75 61 34 5258 129 103 -26 Note All unirradiated data piesented here was taken from CENPD-53t1 1 .

Millstone Unit 2 Capsule W-83

5-15 Table 5-10 Comparison of the Millstone Unit 2 Reactor Vessel Surveillance Capsule Charpy Impact Test Results with Regulatory Guide 1.99 Revision 2 Predictions 30 ft-lb Transition Upper Shelf Energy Temperature Shift Decrease Material Capsule Calculated Predicted Measured Predicted Measured Fluence (OF) (a) (OF) (%) (a) (%) (b)

(X 10"9 n/cm 2)

Lower Shell Plate W-97 0.324 75.9 65.75 18 28 C-506-1 Longitudinal (Heat # C-5667-1) W-104 0.949 108.9 87.67 23 20 W-83 1.74 126.5 119.12 27 30 Lower Shell Plate W-97 0.324 75.9 90.83 18 27 C-506-1 Transverse W-83 1.74 1265 145.78 27 22 (Heat # C-5667-1)

Intermediate to W-97 0.324 79.2 65.93 30 24 Lower Girth Seam 9-203 W-104 0.949 113.6 52.12 38 19 (Heat # 10137 &

90136)

W-83 1.74 132 5609 45 17 Heat Affected Zone W-97 0 324 -- 74.26 - - 29 Metal W-83 1.74 - 43.18 - 20 Standard Reference W-104 0.949 -- 133.41 - _ 35 Material Notes:

(a) Based on Regulatory Guide 1.99. Revision 2, methodology using the mean weight percent values of copper and nickel of the surveillance material (b) Values are based on the definition of upper shelf energy given in ASTM E185-82.

Cook Unit 1 Capsule W-83

5-16 Table 5-11 Tensile Properties for Millstone Unit 2 Reactor Vessel Material Irradiated to 1.74 xl019 n/cm 2 (E > 1.0 MeV)

Material Sample Test 0.2% Yield Ultimate Fracture Fracture Fracture Uniform Total Reduction Number Temp. Strength Strength Load Stress (ksi) Strength Elongation Elongation in Area (OF) (ksi) (ksi) (kip) (ksi) (%) (%) (%)

IJC PLATE 75 83.1 1030 3 38 227.6 689 12.5 25 3 70 IJ2 PLATE 250 77.3 963 320 215.5 65 I II 0 22.8 70 IJL PLATE 550 703 96.3 344 1498 70.1 10.2 19.9 53 3K5 WELD 75 875 98.3 3 10 208 8 63.2 II 5 26.0 70 3K3 WELD 250 786 90.5 295 2049 60.1 II 0 24.0 71 "3K7 WELD 550 75.0 93 3 323 176.6 65 8 10.5 21 5 63 4JU HAZ 75 81 9 10t.8 3 35 1934 682 10.8 234 65 4JT IIAZ 250 75 8 95.8 3 14 199 3 640 10 3 23.0 68 4KK HAZ 550 72 3 95.3 349 1762 71 I 10 1 202 60 Cook Umt 1 Capsule W-83

5-17 LOWER SHELL PLATE C-506-1 (LONGITUDINAL)

CGRAPH 4.1 Hyperbolic Tangent Curve Printed at 1521:01 on 10-10--20M Results Curve fluence ISE d-LSE USE d-USE T o 30 d-T

• 30 T o 50 d-T o 0 1 0 219 0 131 0 44.22 0 6425 0 2 0 219 0 94 -37 10927 6575 15011 85.5 3 a 2.19 0 95 -36 1319 67.7 17356 1092 4 219 0 92 -39 1634 11912 204 45 140J 09

-300 -200 -100 0 100 200 30 400 500 6W0 Temperature in Degrees F Curve legend I D- 20- 3e 4 .--

Data Set(s) Potted Curve plant Carlule Matenal OrL HteatS

. . .. . . . .. .. ~~~~~~Or .. e... .l 1 M112 UNIER PLATE SA533BI LT C-5667-1 2 M12 W-97 PLATE SA533BI LT C--56-1 3 ?l2 W-104 PLATE SA533B1 LT C-6667-1 4 W12 W--3 PLATE SA533BI LT C-56M7-1 Figure 5-1 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation)

Millstone Unit 2 Capsule W-83

5-18 Figure 5-2 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation)

Millstone Unit 2 Capsule W-83

5-19 LOWER SHELL PLATE C-506-1 (LONGITUDINAL)

C-GRAPH 4.1 Hyperbolic Tangent Curve Printed at 15fr300 on 10-10-2002 Reults Curve Fluence T a T0/ ear d-T o 59/ Shear 1 0 65J62 0 2 0 177.65 "112M3 3 0 17255 106.93 lI02 M30.9 4 0 0)

CI) 0)

0 0)

-300 -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve Legend 10- 20. 3e Data Set(s) Plotted Plhnt Cansule Material Orn Heat*

Curve OrL Beat#

Curve Plant Cangule Material 1 MI12 UNIRR PLATE SA533BI LT C--56-l 2 112 11-97 PLATE SA533BI LT C--5/-l 3 M12 1-104 PLATE SAM33BI LT C-w-1 4 M112 W--3 PLATE SA53*I LT C--667-l Figure 5-3 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation)

Millstone Unit 2 Capsule W-83

5-20 LOWER SHELL PLATE C-506-1 (TRANSVERSE)

CVGRAPH 41 H)perbolhc Tangent Curne Pnnted at MrY4352 on 10-14-2002 Results Curve Fluence LS d-LSE USE d-USE T o 30 d-T o 3 T o 50 d-T o 50 1 0 2.19 0 103 0 M4 0 522 0 5-20 2 0 219 0 79 -29 10924 9OB3 155.06 10M5 3 0 219 0 84 -24 16428 14578 20523 15293 0.)

z 0

-300 -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve Legend ID- 20-----. 3 e-Data Set(s) Plotted Curve Plant Cawule Material Ohf Th-atih fleati Matenal Ori 1 MI2 ULMIFJ PLATE SA533BI TL C-0667-1 2 W412 W-97 PLATE SA533BI TL C-5667-1 3 M12 W-M3 PLATE SA533BI TL C-56-7-1 Figure 5-4 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation)

Millstone Unit 2 Capsule W-83

5-21 LOWER SHELL PLATE C-506-1 (TRANSVERSE)

CVGRAPH 41 lHyperbohc Tangent Curve Printed at 1-0401 on 10-14-2002 eul~ts

• .-va I;'1.*,n re, 1l d-US1 ToIF d-TO1X3S 1 0 874 0 24.4( 0 2 0 7824 -9186 I= 9798 3 0 8422 -3,17 19I 17219 200'-

150 co

-4 1000 0-0

-300 -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve Legend ID- 20- -- 30 Data Sets) Plotted rm-vp Plan!t C'a~iile Materhal on Heat.1 Curve Plant CaTmile Mate I

! M12 UNIRR PLATE SA533B1 TL C-968-1 2 M12 W-97 PLATE SA533BI TL C-M6-1 3 M12 W-M3 PLATE SA533BI TL C-566-1 Figure 5-5 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation)

Millstone Unit 2 Capsule W-83

5-22 LOWER SHELL PLATE C-506-1 (TRANSVERSE)

CVGPAPH 41 Hyperbolic Tangent Curve Printed at 121313 on 10-14-2)02 P*SuIls Curve Fluence T o 5ý/ Shear d-T

• 5W Shear 1 0 5953 0 2 0 165.52 105.99 3 0 19171 13218 4)

Q) 0)

C)

C.)

-300 -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve Legend lt0- 20----------

Data Set(s) Plotted Curve Plant Carsule Material Orn heat 5 Ori Heat#

1 ML2 UNIP.R PLATE SA533BI TL C-5667-1 2 N112 W-97 PLATE SA533BI TL C-5667-1 3 M12 W-83 PLATE SAS33BI Th C-M5--o -

Figure 5-6 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation)

Millstone Unit 2 Capsule W-83

5-23 SURVEILLANCE PROGRAM WELD MATERIAL CVGRA.PH 41 Hyperbolic Tangent Curve Printed at 10-1121 on 11-21-2002 Results Curve Fluence ISE d-ISE USE d-USE T

• 30 d-T o 3 T c 50 d-T o 50 1 0 219 0 132 0 -3215 0 -1225 0 2 0 219 0 100 -32 3178 6593 5827 70.52 3 0 219 0 107 -25 19.97 5222 50s7 6262 4 0 219 0 109 -23 2394 56.09 647 76-9 0')

T

.0 a,

z L)

-300 -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve le-gend 10- 20 -.-.-- 4 -

Data Set(s) Plotted Curve Plant CaDsue Material Ort Heat#

1 M12 UNIRR WELD L 124/0091 90136/10137 2 M12 W-97 WMEL 124/0091 90136/10137 3 M12 1-104 MELD 1124/0091 90136/10137 4 M12 W-83 WELD L 124/0091 90136/10137 Figure 5-7 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Weld Metal Millstone Unit 2 Capsule W-83

5-24 Figure 5-8 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Weld Metal Millstone Unit 2 Capsule W-83

5-25 SURVEILLANCE PROGRAM WELD MATERIAL CVGRAPH 4. Hyperbohc Tangent Curve Printed at 122854 on 10-14-200 tesults urnve Fluence T a 50 Shear d-T o W. Shear Curve luenc 0 -12.18 V 2 0 677 79.89 3 0 4921 614 4 0 7021 Cf)

-30W -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve Legend 10- 20-- 30 4`

Data Set(s) Plotted M~ateral OrL Heat#

• rrv* Plan! ['*de

(%-. Plant Ca-ile Mat 1 UNIRR WW L 124/0091 90136/10137 2 M12 1-97 WELDL 124/0091 90136/10137 3 T-104 WUl~L 124/0091 90136/10137 4 M12 WMl L 124/0091 90136/10137 Figure 5-9 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel WVeld Metal Millstone Unit 2 Capsule W-83

5-26 HEAT AFFECTED ZONE CVGRAPH 4.1 Hyperbobc Tangent Curve Pnnted at 09M729 on 10-15-2002 Results Curve Fluence LSE d-ISE USE d-USE T o 30 d-T

• 30 T o 50 d-T o 50 1 0 219 0 129 0 -1152 0 8.75 0 5-26 2 0 219 0 91 -38 62-74 7426 9OB3 82.0 3 0 219 0 103 -26 3166 4318 6134 2.

CI)

-r

-o a,

z C-)

-300 -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve Legend 1t- ....... -

Data Set(s) Plotted Curve Plant Capsule Material Ori Heatf 1 M12 UNIRR HEAT AMO ZONE SA533BM C-506-1 2 M12 W-97 HEAT AFFD ZONE S.533B1 C--500 3 M12 W--3 HEAT AFFD ZONE S.533B1 C-506-1 Figure 5-10 Charpy V-Notch Impact Data for Millstone Unit 2 Reactor Vessel Shell Heat Affected Zone Material Millstone Unit 2 Capsule W-83

5-27 HEAT AFFECTED ZONE CVGRAPH 41 Hyperbolic Tangent Curve Printed at 10:0112 on 10-15--2002 Pmiults Curve nluence USE d-USE T LE3 d-T v LE35 1 0 w039 0 .72 0 2 0 76.34 -14I6 7637 75.65 3 0 68.9 -2149 75.4 74.6 4-)

-300 -200 -100 0 100 200 300 400 5OW 6w0 Temperature in Degrees F Curve Legend 20-- 30 I C--

Data Sets) Plotted Material Ori Headl Ccn,' Flhnt Cni~ule ..

.... v Cu . ... Ca ......

I ..... l 1 M12 UNIRF HEAT AFFD ZONE S.533BI C-WlE-1 2 W-97 HEAT AFFD ZONE SASM3B1 C-50E-l 3 M12 W!-3 HEAT AFFD ZONE SA533M C-506-1 Figure 5-11 Charpy V-Notch Lateral Expansion vs. Temperature for Millstone Unit 2 Reactor Vessel Shell Heat Affected Zone Material Millstone Unit 2 Capsule W-83

5-28 HEAT AFFECTED ZONE CVGRAPH 4.1Hyperbolic Tangent Curve Pnnted at 100).13 on 10-15-2002 PRsults Curve Fluence T a T/ Shear d-T a 50TShear 1 0 7.96 0 2 0 96.N7 8871 3 0 69.37 614 C)

Cr C)

C©

-4

-300 -200 -100 0 100 200 300 400 500 600 Temperature in Degrees F Curve Legend D-0 20------ 30-Data Set(s) Plotted Curve Plant Capsule Matenal On Heati M12 UNIRR JEAT AFFD ZONE SAS53BI C-506-1 2 ML2 I-97 HEAT AFFD ZONESA533BI C-50G-l 3 11-M3 HEAT AFYI) ZONESA533BI C-506--l Figure 5-12 Charpy V-Notch Percent Shear vs. Temperature for Millstone Unit 2 Reactor Vessel Heat Affected Zone Material Millstone Unit 2 Capsule W-83

5-29 132, 0F 146, 75-F 117, 130°F 13C, 175-F 121, 175°F 136, 200°F 156, 215°F 165, 225°F 131, 250°F 12K, 300°F 126, 325°F 16D, 350°F Figure 5-13 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation)

Millstone Unit 2 Capsule W-83

5-30 224, 0°F 231, 75°F 21L, 130OF 253,150°F 213, 150°F 245, 175°F 212, 175 0F 211, 200°F 23L, 225°F 214, 275 0 F 24K, 300-F 22A, 325-F Figure 5-14 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Transverse Orientation)

Millstone Umt 2 Capsule W-83

5-31 314, -50OF 33K, 00 F 34L, 30-F 311, 50-F 32A, 75-F 36D, 100°F 36E, 125°F 34C, 150°F 337, 200°F 323, 225°F 336, 250°F 312, 250 0 F Figure 5-15 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Weld Metal Millstone Urnt 2 Capsule W-83

5-32 42T, -75°F 46E, -25°F 42P, 00 F 41E, 25 0 F 4 IT, 50°F 42U, 75OF 427,100 0 F 43K, 150°F 41U, 200°F 46B, 250°F 45K, 300OF 44C, 3250 F Figure 5-16 Charpy Impact Specimen Fracture Surfaces for Millstone Unit 2 Reactor Vessel Weld HAZ Metal Millstone Unit 2 Capsule W-83

5-33 (0£)

0 50 100 150 200 250 300 350 120 I II I I I I 800 110 TENSILE STRENGTH 100 700 90 600 C5

~80

,70 Lad 500

- 60 400 0 2% YIELD STRENGTH 50 300 40 LEGEND:

0A UNIRRADIATED SA IRRADIATED TO A FLUENCE OF 1.74 X 1019 n/cm2 (E>1.OMeV) AT 5500 F 80 REDUCTION IN AREA 70 A 60 A 50

-J I 40 C-)

TOTAL ELONGATION 30 20 URMA 10 S UNIF ORM, ELONGATION I I 0 i i

• i I I 0 100 21O0 300 4010 500 600 700 TEMPERATURE (OF)

Figure 5-17 Tensile Properties for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation)

Millstone Unit 2 Capsule W-83

5-34 (0 C) 0 50 100 150 200 250 300 350 120 I I I I 800 110 100 ULTIMATE TENSILE STRENGTH 700 90 600 d1 CS 80 m:.

"Ck, 500 70 I-- 0 2% YIELD STRENGTH 60 400 50 300 40 LEGEND:

• A UNIRRADIATED IRRADIATED TO A FLUENCE OF 1.74 X 1019 nfcm 2 (E>1.0MeV) AT 5501F 80

.*- * **,-A REDUCTION IN AREA 70 60 C 50

._J I.-. 40 iC-:,

30 TOTAL ELONGATION 20 10 UNIFORM ELONGATION 0

0 100 200 300 400 500 600 700 TEMPERATURE (OF)

Figure 5-18 Tensile Properties for Millstone Unit 2 Reactor Vessel Weld Metal MIdIstone Unit 2 Capsule WV-83

5-35 (0C) 0 50 100 150 200 250 300 350 120 III I II 800 110 ULTIMATE TENSILE STRENGTH 100 700 90 600 in 80 C-70 500 60 1400 0 2% YIELD STRENGTH 50 300 40 LEGEND:

• ©A UNIRRADIATED 2 0 IRRADIATED TO A FLUENCE OF 1.74 X 1019 njcm (E>1.0MeV) AT 550 F 80 REDUCTION IN AREA 70 60

- 50 J40 30 TOTAL ELONGATION 20 10 0 , UNIFORM ELONGATION I I I I 0 100 200 300 400 500 600 700 TEMPERATURE (OF)

Figure 5-19 Tensile Properties for Millstone Unit 2 Reactor Vessel Heat Affected Zone Material M*illstone Unit 2 Capsule W-83

5-36 Specimen IJC Tested at 75 0 F Specimen 1,J2 Tested at 250°F Specimen iJLTested at 550'F Figure 5-20 Fractured Tensile Specimens for Millstone Unit 2 Reactor Vessel Shell Plate C-506-1 (Longitudinal Orientation)

Millstone Umit 2 Capsule W-83

5-37 Specimen 3K5 Tested at 75'F Specimen 3K3 Tested at 250°F j**.*"*4 ...-... &.,,,... ..- .-- . . A Z-AU-4.1,,, "

Specimen 3K7 Tested at 550°F Figure 5-21 Fractured Tensile Specimens for Millstone Unit 2 Reactor Vessel Surveillance Weld Metal Millstone Unit 2 Capsule W-83

5-38 Specimen 4JU Tested at 75°F Specimen 4JT Tested at 250'F Specimen 4KK Tested at 550'F Figure 5-22 Fractured Tensile Specimens for Millstone Unit 2 Reactor Vessel Surveillance HAZ Metal Millstone Unit 2 Capsule W-83

5-39 STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 80 d6 60 I-l

'0 40 1JC 75 F 20 0

0 0.05 01 015 02 025 03 STRAIN, IN/IN STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 90 80 70 ui 60 o3 w 50 I

0) 40 30 1J2 250 F 20 10 0 .1.

0 0.05 01 0.15 02 025 03 STRAIN, IN/IN Figure 5-23 Engineering Stress-Strain curves for Millstone Unit 2 Reactor Vessel Intermediate Shell Plate C-506-1, 830 Capsule, Longitudinal Tensile Specimens 1JC and 1J2.

Millstone Unit 2 Capsule W-83

5-40 STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 90 80 70 60 Co Ui w 50 Cr 40 30 1JL 550 F 20 10 0

0 005 01 015 02 025 03 STRAIN, IN/IN Figure 5-24 Engineering Stress-Strain Curves for Millstone Unit 2 Reactor Vessel Intermediate Shell Plate C-506-1, 830 Capsule, Longitudinal Tensile Specimens 1JL.

Millstone Unit 2 Capsule W-83

5-41 STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 90 80 70 60 cci cio 50 rI I-Co 40 3K5 30 75 F 20 10 0

0 005 0.1 015 02 0.25 0.3 STRAIN, IN/IN STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 90 80 70 60 LUi 50 I

Co 40 30 3K3 250 F 20 10 0

0 0.05 01 015 02 025 03 STRAIN, IN/IN Figure 5-25 Engineering Stress-Strain Curves for Millstone Unit 2 Reactor Vessel Weld Metal 830 Capsule, Tensile Specimens 3K5 and 3K3.

Millstone Unit 2 Capsule W-83

5-42 STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 90 80 70 60 Uo 50 rU" UI 40 30 3K7 550 F 20 10 0

005 01 015 02 025 03 STRAIN, IN/IN Figure 5-26 Engineering Stress-Strain Curves for Millstone Unit 2 Reactor Vessel Weld Metal 830 Capsule, Tensile Specimens 3K7.

Millstone Unit 2 Capsule W-83

5-43 STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 80 (n5 60 LU 40 4JU 75 F 20 -

0 0 0 05 0.1 015 02 025 03 STRAIN, IN/IN STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 90 80 70

"" 60 0 50 w

LU S40 4JT 30 250 F 20 10 0

0 005 01 0.15 02 025 03 STRAIN, IN/IN Figure 5-27 Engineering Stress-Strain Curves for Millstone Unit 2 Reactor Vessel HAZ, 830 Capsule, Tensile Specimens 4JU and 4JT.

Millstone Unit 2 Capsule W-83

5-44 STRESS-STRAIN CURVE MILLSTONE UNIT 2 83 DEG CAPSULE 100 90 80 70 Cd 60 Cd)

I.) 50 rwr I-Cd) 40 4KK 30 550 F 20 10 0

0 005 01 0-15 02 025 03 STRAIN, IN/IN Figure 5-28 Engineering Stress-Strain Curves for Millstone Unit 2 Reactor Vessel HAZ, 830 Capsule, Tensile Specimen 4KK.

Millstone Unit 2 Capsule W-83

6 RADIATION ANALYSIS AND NEUTRON DOSIMETRY

6.1 INTRODUCTION

This section describes a discrete ordinates S, transport analysis performed for the Millstone Unit 2 reactor to determine the neutron radiation environment within the reactor pressure vessel and surveillance capsules. In this analysis, fast neutron exposure parameters in terms of fast neutron fluence (E > 1.0 MeV) and iron atom displacements (dpa) were established on a plant and fuel cycle specific basis. An evaluation of the most recent dosimetry sensor set from Capsule W-83, withdrawn at the end of the fourteenth plant operating cycle, is provided. In addition, to provide an up-to-date database applicable to the Millstone Unit 2 reactor, the sensor set from previously withdrawn capsules were also re-analyzed using the current dosimetry evaluation methodology. The dosimetry updates are presented in Appendix A of this report. Comparisons of the results from these dosimetry evaluations with the analytical predictions served to validate the plant specific neutron transport calculations. These validated calculations subsequently formed the basis for providing projections of the neutron exposure of the reactor pressure vessel for operating periods extending to 54 Effective Full Power Years (EFPY).

The use of fast neutron fluence (E > 1.0 MeV) to correlate measured material property changes to the neutron exposure of the material has traditionally been accepted for the development of damage trend curves as well as for the implementation of trend curve data to assess the condition of the vessel. In recent years, however, it has been suggested that an exposure model that accounts for differences in neutron energy spectra between surveillance capsule locations and positions within the vessel wall could lead to an improvement in the uncertainties associated with damage trend curves and improved accuracy in the evaluation of damage gradients through the reactor vessel wall.

Because of this potential shift away from a threshold fluence toward an energy dependent damage function for data correlation, ASTM Standard Practice E853, "Analysis and Interpretation of Light-Water Reactor Surveillance Results," recommends reporting displacements per iron atom (dpa) along with fluence (E > 1.0 MeV) to provide a data base for future reference. The energy dependent dpa function to be used for this evaluation is specified in ASTM Standard Practice E693, "Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements per Atom." The application of the dpa parameter to the assessment of embrittlement gradients through the thickness of the reactor vessel wall has already been promulgated in Revision 2 to Regulatory Guide 1.99, "Radiation Embrittlement of Reactor Vessel Materials."

All of the calculations and dosimetry evaluations described in this section and in Appendix A were based on the latest available nuclear cross-section data derived from ENDFIB-VI and made use of the latest available calculational tools. Furthermore, the neutron transport and dosimetry evaluation methodologies follow the guidance and meet the requirements of Regulatory Guide 1.190, "Calculational and Dosimetry t 61 Additionally, the methods used to Methods for Determining Pressure Vessel Neutron Fluence."'

develop the calculated pressure vessel fluence are consistent with the NRC approved methodology described in WCAP-14040-NP-A, "Methodology Used to Develop Cold Overpressure Mitigating System Setpoints and RCS Heatup and Cooldown Limit Curves," January 19 9 6 .t17] The specific calculational methods applied are also consistent with those described in WCAP-15557, "Qualification of the Westinghouse Pressure Vessel Neutron Fluence Evaluation Methodology.18]

Millstone Unit 2 Capsule IV-83

6-2 6.2 Discrete Ordinates Analysis A plan view of the Millstone Unit 2 reactor geometry at the core midplane is shown in Figure 4-1. Six irradiation capsules attached to the reactor pressure vessel are included in the reactor design that constitutes the reactor vessel surveillance program. The capsules are located at azimuthal angles of 830, 970, 2630, 2770 (70 from the core cardinal axes), and 104' and 2840 (140 from the core cardinal axes) as shown in Figure 4-1. The surveillance capsules reside within surveillance capsule holders that are attached to the pressure vessel cladding. The center radius of the surveillance capsule holder is 85-7/16 inches (nominal). The 98-3/4 inch high surveillance capsule holder contain an 80.72 inch stacked length of surveillance capsule compartments that are positioned axially such that the test specimens are centered on the core midplane.

From a neutronic standpoint, the surveillance capsules and associated support structures are significant.

The presence of these materials has a marked effect on both the spatial distribution of neutron flux and the neutron energy spectrum in the water annulus between the core barrel and the reactor vessel. In order to determine the neutron environment at the test specimen location, the capsules themselves must be included in the analytical model.

The fast neutron exposure evaluations for the Millstone Unit 2 reactor ,,essel and surveillance capsules were based on a series of fuel cycle specific forward transport calculations that were combined using the following three-dimensional flux synthesis technique 6 (r, 0, Z) = ((r,0) x -7) 0(r) where 0(r,0,z) is the synthesized three-dimensional neutron flux distribution, 0(rO) is the transport solution in rO geometry, 0(rz) is the two-dimensional solution for a cylindrical reactor model using the actual axial core power distribution, and ý(r) is the one-dimensional solution for a cylindrical reactor model using the same source per unit height as that used in the rO two-dimensional calculation. This synthesis procedure was carried out for each operating cycle at Millstone Unit 2.

For the Millstone Unit 2 transport calculations, the rO model depicted in Figure 6-1 was utilized since the reactor is octant symmetric (with the exception of the surveillance capsules). This rO model includes the core, the reactor internals, core barrel, thermal shield (through cycle 5), explicit representations of the surveillance capsules at 70 and 140, the pressure vessel cladding and vessel wall, the insulation external to the pressure vessel, and the primary biological cladding and shield wall. This rO model was utilized in the synthesis procedure to perform the surveillance capsule dosimetry evaluations and subsequent comparisons with calculated results, in addition to calculating the maximum neutron exposure levels at the pressure vessel wall. Note that a variation of this model in which the material composition of the surveillance capsules was redefined as water was utilized to determine the maximum neutron exposure at the pressure vessel wall in octants of the core that do not contain surveillance capsules. In developing this analytical model, nominal design dimensions were employed for the various structural components with two exceptions. Specifically, the radius to the center of the surveillance capsule holder as well as the pressure vessel inner radius (PVIR) were taken from the as-built drawings for the Millstone Unit 2 reactor This was done to account for key differences between the nominal ,ersus as-built dimensions.

Millstone Unit 2 Capsule W-83

6-3 Water temperatures, and hence, coolant densities in the reactor core and downcomer regions of the reactor were taken to be representative of full power operating conditions. The coolant densities were treated on a fuel cycle specific basis. The reactor core itself was treated as a homogeneous mixture of fuel, cladding, water, and miscellaneous core structures such as fuel assembly grids, guide tubes, et cetera. The geometric mesh description of the rO reactor model consisted of 134 radial by 68 azimuthal intervals. The mesh size was chosen to assure that proper convergence of the inner iterations was achieved on a point wise basis. The pointwise inner iteration flux convergence criterion utilized in the r,e calculations was set at a value of 0.001.

The rz model used for the Millstone Unit 2 calculations (see Figure 6-2) extended radially from the centerline of the reactor core out to a location interior to the primary biological shield and over an axial span from an elevation 1-foot below the lower support assembly plate (inlet plenum region) to ]-foot above the fuel alignment plate (outlet plenum region). As in the case of the rO model, nominal design dimensions (except for the PVIR as-built dimension) and full power coolant densities were employed in the calculations. In this case, the homogenous core region was treated as an equivalent cylinder with a volume equal to that of the active core zone. The stainless steel girth ribs located between the core shroud and core barrel regions were also explicitly included in the model. The rz geometric mesh description of the reactor model consisted of 140 radial by 104 axial intervals. As in the case of the r,0 calculations, mesh sizes were chosen to assure that proper convergence of the inner iterations was achieved on a pointwise basis. The pointwise inner iteration flux convergence criterion utilized in the r,z calculations was also set at a value of 0.001.

The one-dimensional radial model used in the synthesis procedure consisted of the same 140 radial mesh intervals included in the rz model. Thus, radial synthesis factors could be determined on a mesh wise basis throughout the entire geometry.

The core power distributions used in the plant specific transport analysis were taken from the appropriate Millstone Unit 2 fuel cycle designs. The data extracted from the design calculations represented cycle dependent fuel assembly enrichments, burnups, and axial power distributions. Peripheral fuel assembly pin power distributions for cycles 1-9 (non-low leakage) were utilized from cycle 3. Peripheral fuel assembly pin power distributions for cycles 10-15 (low leakage) were obtained from cycle 15, i.e., the current operating fuel cycle. Peripheral fuel assembly pin power distributions for future operating cycles (also low leakage) are based on the cycle 17 anticipated core reload design. This information was used to develop spatial and energy dependent core source distributions averaged over each individual fuel cycle.

Therefore, the results from the neutron transport calculations provided data in terms of fuel cycle averaged neutron flux, which when multiplied by the appropriate fuel cycle length, generated the incremental fast neutron exposure for each fuel cycle. In constructing these core source distributions, the energy distribution of the source was based on an appropriate fission split for uranium and plutonium isotopes based on the initial enrichment and burnup history of individual fuel assemblies. From these assembly dependent fission splits, composite values of energy release per fission, neutron yield per fission, and fission spectrum were determined.

All of the transport calculations supporting this analysis were carried out using the DORT discrete 20 ordinates code Version 3.1['93 and the BUGLE-96 cross-section library.1 ' The BUGLE-96 library provides a 67 group coupled neutron-gamma ray cross-section data set produced specifically for light water reactor (LWR) applications. In these analyses, anisotropic scattering was treated with a P5 Legendre expansion and angular discretization was modeled with an S16 order of angular quadrature.

Millstone Unit 2 Capsule W-83

Energy and space dependent core power distributions, as well as system operating temperatures, were treated on a fuel cycle specific basis.

Selected results from the neutron transport analyses are provided in Tables 6-I through 6-9. In Table 6-1, the calculated cycle specific exposure rates and integrated exposures, expressed in terms of both neutron fluence (E > 1.0 MeV) and dpa, are given at the radial and azimuthal center of the two surveillance capsule positions (70 and 14'). These results, representative of the axial midplane of the active core, establish the calculated exposure of the surveillance capsules withdrawn to date as well as projected into the future. In Table 6-2, cycle specific maximum integrated neutron exposures, expressed in terms of both neutron fluence (E > 1 0 MeV) and dpa, are given at the pressure vessel clad base metal interface at azimuthal angles of 0', 150, 300, and 450 relative to the core major axis. These values are applicable to the intermediate shell plates and intermediate shell longitudinal welds. Table 6-3 contains comparable results for the intermediate shell to lower shell circumferential weld located approximately 15-15/16 inches below the core midplane. These values are applicable as maximum values for the lower shell plate and lower shell longitudinal welds. Table 6-4 contains cycle specific integrated neutron exposures, expressed in terms of both neutron fluence (E > 1.0 MeV) and dpa, for the upper shell to intermediate shell circumferential weld located approximately 82-1/16 inches above the core midplane where the maximum value, representative of the 00 azimuth, is reported. Table 6-5 lists the fast fluence (E >1.0 MeV) and dpa for the intermediate shell adjacent to the core barrel holes at 2700 (View "V") and 230' (View "T"). The View "V" holes are located at an elevation of approximately 56-11/16 inches above the core midplane. The View "T"' holes are located at an elevation of approximately 52-11/16 inches above the core midplane. Neutron exposure streaming factors that were applied in cycle 6 through the future projections are 1.01 (fluence) and 1.01 (dpa) for the View "V" holes, and 1.03 (fluence) and 1 02 (dpa) for the View "T" holes. Due to the symmetry in the reactor geometry, each of the intermediate and lower shell plates and their longitudinal welds spanning 1200 sectors experience neutron exposure levels characteristic of the 00, 15', 30', and 45' azimuths.

Calculated fluence (E > 1.0 MeV) and dpa data are provided in Tables 6-I through 6-5. All of the data provided in Tables 6-2 through 6-4 was taken at the axial location of the maximum exposure experienced by each material based on the results of the three-dimensional synthesized neutron exposure evaluations.

The data tabulations include plant fuel cycle specific calculated neutron exposures at the end of the fourteenth operating fuel cycle as well as projections for the current operating fuel cycle, i.e., cycle fifteen, and beyond to 32, 48, and 54 effective full power years (EFPY). The reactor power level for fuel cycles one and two was 2560 MWt. The reactor power level for all subsequent fuel cycles, i.e., fuel cycle three through 54 EFPY, was 2700 MWt (even though cycle three operated at 2560 MWt for approximately one month). The projection for fuel cycle fifteen was based on the reactor power level and spatial power distributions for fuel cycle fifteen and an assumed fuel cycle length of 532 EFPD Projections beyond the current operating fuel cycle were based on the assumption that future operation would continue to make use of low leakage fuel management and that the cycle seventeen spatial power distributions would be typical of future operating cycles.

Radial gradient information applicable to fast (E > 1.0 MeV) neutron fluence and dpa are given in Tables 6-6 and 6-7, respectively. The data, based on the maximum cumulative integrated exposures from cycles one through fifteen, are presented on a relative basis for each exposure parameter at several azimuthal locations. Exposure distributions through the vessel wall may be obtained by multiplying the calculated exposure at the vessel inner radius by the gradient data listed in Tables 6-6 and 6-7.

Millstone Unit 2 Capsule IV-83

6-5 The calculated fast neutron exposures for the in-vessel surveillance capsules withdrawn from the Millstone Unit 2 reactor are provided in Table 6-8. These assigned neutron exposure levels are based on the plant and fuel cycle specific neutron transport calculations performed for the Millstone Unit 2 reactor.

Updated lead factors for the Millstone Unit 2 surveillance capsules are provided in Table 6-9. The capsule lead factor is defined as the ratio of the calculated fluence (E > 1.0 MeV) at the geometric center of the surveillance capsule to the corresponding maximum calculated fluence at the pressure vessel clad/base metal interface. In Table 6-9, the lead factors for the capsules that have been removed from service are based on the calculated fluence values for the irradiation period corresponding to the time of withdrawal for the individual capsules. For the capsules that remain in service, the lead factors correspond to the calculated fluence values at the end of cycle fifteen, the current operating fuel cycle for Millstone Unit 2.

6.3 Neutron Dosimetry The validity of the calculated neutron exposures previously reported in Section 6.2 is demonstrated by a direct comparison against the measured sensor reaction rates and via a least squares evaluation performed for each of the capsule dosimetry sets. However, since the neutron dosimetry measurement data merely serves to validate the calculated results, only the direct comparison of measured-to-calculated results for the most recent surveillance capsule removed from service is provided in this section of the report. For completeness, the assessment of other measured dosimetry removed to date, based on both direct and least squares evaluation comparisons, is documented in Appendix A.

The direct comparison of measured versus calculated fast neutron threshold reaction rates for the sensors from Capsule W-83, that was withdrawn from Millstone Unit 2 at the end of the fourteenth fuel cycle, is summarized below.

Reaction Rates (ms/atom) M/C Reaction Measured Calculated Ratio 54Fe(n,p)54Mn 4.50E-15 4.54E-15 0.99 5"8Ni(n,p)58Co (Cd) 5.75E- 15 5.95E-15 0.97 Average: 0.98 I  % Standard Deviation- 1 1.4 The measured-to-calculated (MIC) reaction rate ratios for the Capsule W-83 threshold reactions range from 0.97 to 0.99, and the average M/C ratio is 0.98 +/- 1.4% (lo). This direct comparison falls well within the +/- 20% criterion specified in Regulatory Guide 1.190; furthermore, it is consistent with the full set of comparisons given in Appendix A for other measured dosimetry removed to date from the Millstone Unit 2 reactor. As a result, these comparisons validate the current analytical results described in Section 6.2 and are deemed applicable for Millstone Unit 2.

Millstone Unit 2 Capsule W-83

6-6 6.4 Calculational Uncertainties The uncertainty associated with the calculated neutron exposure of the Millstone Unit 2 surveillance capsule and reactor pressure vessel is based on the recommended approach provided in Regulatory Guide 1.190. In particular, the qualification of the methodology was camed out in the following four stages:

I- Comparison of calculations with benchmark measurements from the Pool Critical Assembly (PCA) simulator at the Oak Ridge National Laboratory (ORNL).

2- Comparisons of calculations with surveillance capsule and reactor cavity measurements from the H. B Robinson power reactor benchmark expeniment.

3- An analytical sensitivity study addressing the uncertainty components resulting from important input parameters applicable to the plant specific transport calculations used in the neutron exposure assessments 4 - Comparisons of the plant specific calculations with aailable capsule dosimetry results from the Millstone Unit 2 surveillance program.

The first phase of the methods qualification (PCA comparisons) addressed the adequacy of basic transport calculation and dosimetry evaluation techniques and associated cross-sections. This phase, however, did not test the accuracy of commercial core neutron source calculations nor did it address uncertainties in operational or geometric variables that impact power reactor calculations. The second phase of the qualification (H. B. Robinson comparisons) addressed uncertainties in these additional areas that are primarily methods related and would tend to apply generically to all fast neutron exposure evaluations. The third phase of the qualification (analytical sensitivity study) identified the potential uncertainties introduced into the overall evaluation due to calculational methods approximations as well as to a lack of knowledge relative to various plant specific input parameters. The overall calculational uncertainty applicable to the Millstone Unit 2 analysis was established from results of these three phases of the methods qualification.

The fourth phase of the uncertainty assessment (comparisons with Millstone Unit 2 measurements) was used solely to demonstrate the validity of the transport calculations and to confirm the uncertainty estimates associated with the analytical results. The comparison was used only as a check and was not used in any way to modify the calculated surveillance capsule and pressure vessel neutron exposures previously described in Section 6.2. As such, the validation of the Millstone Unit 2 analytical model based on the measured plant dosimetry is completely described in Appendix A.

The following summarizes the uncertainties developed from the first three phases of the methodology qualification. Additional information pertinent to these evaluations is provided in Reference 3.

Methodology Capsule Vessel IR PCA Comparisons 3% 3%

H B. Robinson Comparisons 3% 3%

Analytical Sensitivity Studies 10% 11%

Additional Uncertainty for Factors not Explicitly Evaluated 5% 5%

Net Calculational Uncertainty 12% 13%

Millstone Unit 2 Capsule W-83

6-7 The net calculational uncertainty was 'determined by combining the individual components in quadrature.

Therefore, the resultant uncertainty was random and no systematic bias was applied to the analytical results.

The plant specific measurement comparisons described in Appendix A support these uncertainty assessments for Millstone Unit 2.

Millstone Unit 2 Capsule WV-83

6-8 Figure 6-1 Millstone Unit 2 r,0 Reactor Geometry at the Core Midplane o

g S a

(.2) S,.v cpj*

Millstone Unit 2 Capsule W-83

6-9 Figure 6-2 Millstone Unit 2 rz Reactor Geometry MIllstone 2 R-Z Model 250 200 100 50 0

E

- -50 P4F 0 75 150 225 300 575 R Axis (cm)

Millstone Unit 2 Capsule W-83

6-10 Table 6-1 Calculated Neutron Exposure Rates and Integrated Exposures At the Surveillance Capsule Center D]

Cumulative Neutron Flux (E > 1.0 MeV)

Irradiation [n/cm2 -s]

Time Cycle [EFPY] 70 140 1.3 3.OOE+ 10 2.10E+I10 2 2.2 3.35E+10 2.36E+10 3 30 3.97E+ 10 2.80E+ 10 4 40 3.84E+ 10 2.68E+ 10 5 50 3 79E+10 2.66E+10 6 6.1 5 45E+10 3.90E+ 10 7 7.1 5 58E+10 4.OOE+ 10 8 8.0 5.59E+10 4.02E+10 9 8.9 5.48E+10 3.94E+ 10 10 100 2.46E+ 10 1.96E+10 I1 i1 1 2.81E+10 2.28E+10 12 124 2.33E+10 1.88E+10 13 137 2.47E+ 10 2.06E+ 10 14 15.3 2 46E+10 1.90E+ 10 Current 16.8 2 65E+10 2.03E+10 Future 32.0 2.54E+ 10 1.89E+I0 Future 48.0 2 54E+10 1.89E+10 Future 54.0 2.54E+ 10 1 89E+10 Cumulative Neutron Fluence (E > 1 0 MeV)

Irradiation [n/cm 2]

Time Cycle [EFPY] 70 140 1 13 1.27E+18 8.86E+17 2 2?2 2.13E+18 1 49E+18 3 30 3.24E+ 18 2 28E+18 4 40 4.43E+ 18 3.111E+18 5 50 5.63E+ 18 3.96E+ 18 6 6 1 7.40E+ 18 5.22E+ 18 7 7.1 9.22E+ 18 6.52E+ 18 8 8.0 1 09E+19 7.72E+ 18 9 8.9 1 24E+19 8.78E+18 10 100 1.33E+19 9.49E+ 18 11 11 1 1.42E+ 19 1.02E+ 19 12 124 1.51E+19 I.IOE+19 13 137 1.62E+19 1.19E+19 14 15.3 1.74E+ 19 1.29E+ 19 Current 16.8 1.87E+19 1.38E+19 Future 32.0 3.08E+ 19 2 29E+ 19 Future 48.0 4.37E+19 3.24E+ 19 Future 54.0 4.85E+19 3.60E+ 19 r ii

[LI J Nutron JI exposure ,aues rCeporte Jult me surveillance capsules are centered at me core midplane Millstone Unit 2 Capsule W-83

6-11 Table 6-1 cont'd Calculated Neutron Exposure Rates and Integratdd Exposures At the Surveillance Capsule Center l Cumulative Iron Atom Displacement Rate Irradiation [dpa/s]

Time Cycle [EFPY] 70 140 1 1.3 4.59E- 11 3.23E- 11 2 2.2 5.13E-11 3.63E- 11 3 3.0 6.09E- 11 4.3 1E-I1 4 4.0 5.90E- I1 4.13E-11 5 5.0 5.81E-11 4.1OE-11 6 6.1 7.89E- I1 5.67E- 11 7 7.1 8.07E- 11 5.82E- 11 8 8.0 8.09E- I1 5.85E- 11 9 8.9 7.93E-11 5.72E-I1 10 10.0 3.57E-11 2.86E-11 11 11.1 4 08E-11 3.32E-11 12 12.4 3.38E-11 2.75E-11 13 13.7 3.59E- II 3.01E-I 1 14 15.3 3.58E-1I 2.78E- 11 Current 16.8 3.85E- I1 2.97E- II Future 32.0 3.69E- I1 2.76E- l I Future 48.0 3.69E-1 I 2.76E-1 1 Future 54.0 3.69E- II 2.76E- II Cumulative Iron Atom Displacements Irradiation [dpa]

Time Cycle [EFPY] 70 140 1 1.3 1.94E-03 1.36E-03 2 2.2 3.26E-03 2.29E-03 3 3.0 4.96E-03 3.50E-03 4 4.0 6.79E-03 4.78E-03 5 5.0 8.64E-03 6.08E-03 6 6.1 1.12E-02 7.92E-03 7 7.1 1.38E-02 9.8 1E-03 8 8.0 1.62E-02 1.16E-02 9 8.9 1.84E-02 1.31E-02 10 10.0 1.97E-02 1.41E-02 11 11.1 2.10E-02 1.52E-02 12 12.4 2.24E-02 1.63E-02 13 13.7 2.39E-02 1.76E-02 14 15.3 2.58E-02 1.91E-02 Current 16.8 2.75E-02 2.04E-02 Future 32.0 4.52E-02 3.37E-02 Future 48.0 6.39E-02 4.76E-02 Future 54.0 7.09E-02 5.29E-02

[I] Neutron exposure values reported for the surveillance capsules are centered at the core midplane.

Millstone Unit 2 Capsule W-83

6-10 Table 6-2 Calculated Maximum Neutron Exposure at the Pressure Vessel Clad/Base Metal Interface Cumulative Neutron Fluence (E > 1.0 MeV)

Irradiation [n/cm-]

Time Cycle [EFPY] 00 150 300 450 1 1.3 9.09E+17 5 71E+17 5.13E+17 3.94E+ 17 2 1.1 1.53E+18 9.69E+17 8.86E+17 6.68E+17 3 3.0 2.32E+18 1.47E+18 1.33E+18 9.70E+17 4 4.0 3.15E+18 1.99E+18 1.78E+18 1.30E+18 5 5.0 4.00E+ 18 2.52E+18 2.25E+ 18 1.63E+ 18 6 61 5.39E+ 18 3.40E+18 3.01E+18 2.23E+ 18 7 7.1 6.81E+18 4.30E+ 18 3.77E+ 18 2 81E+18 8 8.0 8.10E+18 5.13E+18 4 46E+18 3.34E+18 9 8.9 9 26E+18 5 87E+18 5.09E+18 3.83E+18 10 10.0 9.97E+18 6 39E+18 5.63E+18 4.25E+18 11 11.1 1.07E+19 6.92E+18 6.15E+18 4.66E+ 18 12 12.4 1.14E+19 7.50E+ 18 6.77E+18 5.15 E+ 18 13 13.7 1.22E+19 8.14E+18 7.45E+18 5.64E+18 14 153 1.33E+19 8.88E+18 8.26E+18 6.27E+ 18 Current 16.8 1.42E+19 9.54E+ 18 8.87E+18 6.82E+18 Future 32.0 2.40E+19 1.61E+19 1.56E+19 1 29E+19 Future 48.0 3.44E+1 9 2.30E+19 2.27E+19 1 93E+19 Future 54.0 3 83E+19 2.56E+19 2 53E+19 2.17E+ 19 Millstone Unit 2 Capsule V-83

6-11 Table 6-2 cont'd Calculated Maximum Neutron Exposure at the Pressure Vessel Clad/Base Metal Interface Cumulative Iron Atom Displacements Irradiation [dpa]

Time Cycle [EFPY] 00 150 300 450 1 1.3 1.44E-03 9.14E-04 8.12E-04 6.28E-04 2 2.2 2.43E-03 1.55E-03 1.40E-03 1.06E-03 3 3.0 3.66E-03 2.34E-03 2.1OE-03 1.54E-03 4 4.0 4.99E-03 3.17E-03 2.82E-03 2.08E-03 5 5.0 6.34E-03 4.04E-03 3.56E-03 2.60E-03 6 6.1 8.45E-03 5.38E-03 4.73E-03 3.52E-03 7 7.1 1.06E-02 6.76E-03 5.88E-03 4.41E-03 8 8.0 1.26E-02 8.02E-03 6.94E-03 5.23E-03 9 8.9 1.44E-02 9.16E-03 7.91E-03 5.99E-03 10 10.0 1.54E-02 9.96E-03 8.72E-03 6.63E-03 11 11.1 1.65E-02 1.08E-02 9.53E-03 7.28E-03 12 12.4 1.77E-02 1.17E-02 1.05E-02 8.03E-03 13 13.7 1.89E-02 1.26E-02 1.15E-02 8.79E-03 14 15.3 2.05E-02 1.38E-02 1.28E-02 9.77E-03 Current 16.8 2.19E-02 1.48E-02 1.37E-02 1.06E-02 Future 32.0 3.69E-02 2.49E-02 2.40E-02 2.OOE-02 Future 48.0 5.28E-02 3.54E-02 3.48E-02 2.99E-02 Future 54.0 5.87E-02 3.94E-02 3.89E-02 3.36E-02 Millstone Unit 2 Capsule W-83

6-12 Table 6-3 Calculated Neutron Exposure of the Intermediate Shell to Lower Shell Circumferential Weld at the Clad/Base Metal Interface Cumulative Neutron Fluence (E > 1.0 MeV)

Irradiation [n/cm2 ]

Time Cycle [EFPY] 00 150 300 450 1 1.3 8.83E+17 5.55E+17 4.98E+17 3.83E+17 2 2.2 1.50E+18 9 49E+17 8 67E+17 6.54E+17 3 3.0 2.29E+18 I 45E+18 1.32E+18 9.60E+17 4 4.0 3.12E+18 1 97E+18 1 77E+18 1.29E+18 5 5.0 3.96E+18 250E+18 223E+18 1.62E+18 6 6.1 5.34E+18 337E+18 299E+18 2.21E+18 7 7.1 6.74E+18 426E+18 3 73E+18 2.78E+18 8 8.0 8.02E+18 508E+18 4.42E+18 3.31E+18 9 8.9 9.17E+18 5.81E+18 5.04E+18 3.79E+18 10 10.0 9 88E+18 6.33E+18 5.57E+18 4.21E+18 11 11.1 1 06E+19 6.86E+18 6.09E+-18 4.62E+ 18 12 124 1 13E+19 7.43E+18 6.71E+18 5.10E+18 13 137 1 21E+19 8.07E+18 7.38E+18 5.59E+18 14 15.3 1 31E+19 8.76E+18 8.15E+18 6.19E+18 Current 168 1 41E+19 9.43E+ 18 8.76E+18 6.73E+18 Future 32 0 2 38E+19 1.59E+19 1.54E+19 1 28E+19 Future 480 3 40E+19 2.27E+19 2.24E+19 1.91E+19 Future 54 0 3 78E+19 2.53E+19 2.50E+19 2.15E+19 Millstone Umt 2 Capsule W-83

6-13 Table 6-3 cont'd Calculated Neutron Exposure of the Intermediate Shell to Lower Shell Circumferential Weld at the Clad/Base Metal Interface Cumulative Iron Atom Displacements Irradiation [d a]

Time Cycle [EFPY] 0 150 300 450 1 1.3 1.40E-03 8.88E-04 7.90E-04 6.10E-04 2 2.2 2.38E-03 1.52E-03 1.37E-03 1.04E-03 3 3.0 3.64E-03 2.32E-03 2.09E-03 1.53E-03 4 4.0 4.95E-03 3.15E-03 2.80E-03 2.06E-03 5 5.0 6.29E-03 4.00E-03 3.53E-03 2.58E-03 6 6.1 8.39E-03 5.34E-03 4.70E-03 3.49E-03

.7 7.1 1.05E-02 6.70E-03 5.84E-03 4.37E-03 8 8.0 1.25E-02 7.96E-03 6.88E-03 5.19E-03 9 8.9 1.42E-02 9.08E-03 7.84E-03 5.94E-03 10 10.0 1.53E-02 9.87E-03 8.65E-03 6.58E-03 11 11.1 1.64E-02 1.07E-02 9.45E-03 7.2 1E-03 12 12.4 1.75E-02 1.1 6E-02 1.04E-02 7.96E-03 13 13.7 1.87E-02 1.25E-02 1.14E-02 8.72E-03 14 15.3 2.03E-02 1.36E-02 1.26E-02 9.64E-03 Current 16.8 2.17E-02 1.46E-02 1.35E-02 1.05E-02 Future 32.0 3.66E-02 2.46E-02 2.37E-02 1.98E-02 Future 48.0 5.22E-02 3.5 1E-02 3.45E-02 2.95E-02 Future 54.0 5.80E-02 3.90E-02 3.85E-02 3.32E-02 Millstone Unit 2 Capsule W-83

6-14 Table 6-4 Calculated Maximum Neutron Exposure of the Upper Shell to Intermediate Shell Circumferential Weld at the Clad/Base Metal Interface Cumulative Neutron Exposure Irradiation Neutron Fluence Iron Atom Time (E> 1 0 MeV) Displacements Cycle [EFPY] [n/cm 2] [dpa]

1 1.3 9.44E+ 16 1.52E-04 2 22 1.66E+ 17 2.67E-04 3 30 2.53E+17 4.08E-04 4 4.0 3.45E+ 17 5 55E-04 5 5.0 4.36E+ 17 7.02E-04 6 6.1 5 30E+17 8.54E-04 7 7.1 6.27E+ 17 1.01E-03 8 8.0 7.20E+ 17 1.16E-03 9 8.9 7.99E+ 17 1.29E-03 10 10.0 8.42E+ 17 1 36E-03 I1 11.1 8 85E+17 1.43E-03 12 12.4 9 36E+17 1.51E-03 13 13.7 9.90E+ 17 1.60E-03 14 15.3 1.06E+ 18 1.72E-03 Current 16.8 1.12E+ 18 1.81E-03 Future 32 0 1.66E+ 18 2.69E-03 Future 48.0 2.22E+18 3 61E-03 Future 54.0 2 43E+ 18 3 96E-03 Millstone Unit 2 Capsule W-83

6-15 Table 6-5 Calculated Neutron Exposure at the Pressure Vessel Clad/Base Metal Interface Adjacent to the Core Barrel Holes Neutron Exposure Cycle Cumulative Adjacent to CB Holes Adjacent to CB Holes Irradiation View "Vl)t View ".T,121 Time Fluence Iron Atom Fluence Iron Atom

[EFPY] (E > 1.0 MeV) Displacement (E > 1.0 MeV) Displacement 2] 2 [dpa]

[n/cm [dpa] [n/cm ]

1 1.3 6.78E+17 1.07E-03 3.43E+17 5.46E-04 2 2.2 1.18E+18 1.87E-03 5.98E+17 9.52E-04 3 3.0 1.79E+ 18 2.84E-03 8.77E+17 1.40E-03 4 4.0 2.44E+ 18 3.86E-03 1.18E+18 1.87E-03 5 5.0 3.08E+ 18 4.87E-03 1.47E- 18 2.34E-03 6 6.1 4.12E+ 18 6.45E-03 1.99E+18 3.13E-03 7 7.1 5.20E+ 18 8.1 OE-03 2.50E+18 3.91E-03 8 8.0 6.21 E+ 18 9.63E-03 2.98E+18 4.65E-03 9 8.9 7.08E+ 18 1.1OE-02 3.41 E+ 18 5.30E-03 10 10.0 7.56E+18 1.17E-02 3.75E+ 18 5.82E-03 11 11.1 8.05E+ 18 1.24E-02 4.10E+18 6.36E-03 12 12.4 8.61 E+ 18 1.33E-02 4.54E+18 7.02E-03 13 13.7 9.21 E+ 18 1.42E-02 4.98E+ 18 7.69E-03 14 15.3 1.00E+ 19 1.54E-02 5.55E+1 8 8.57E-03 Current 16.8 1.07E+19 1.65E-02 6.02E+18 9.28E-03 Future 32.0 1.75E+19 - 2.68E-02 1.I1E+19 1.70E-02 Future 48.0 2.46E+19 3.77E-02 1.64E+19 2.50E-02 Future 54.0 2.72E+ 19 4.17E-02 1.84E+19 2.81E-02

[I] CB Holes View "V" are located at an azimuth of - 2700 and an elevation of 11/16 inches above the core midplane.

Neutron fluence (E > 1.0 MeV) streaming factor = 1.01. Iron atom displacement streaming factor = 1.01.

[2] CB Holes View 'T' are located at an azimuth of - 230r and an elevation of 11/16 inches above the core midplane.

Neutron fluence (E > 1.0 MeV) streaming factor = 1.03. Iron atom displacement streaming factor = 1.02.

Millstone Unit 2 Capsule W-83

6-16 Table 6-6 Relative Radial Distribution of Neutron Fluence (E > 1.0 MeV)

Within The Reactor Vessel Wall RADIUS AZIMUTHAL ANGLE (cm) 00 150 300 450 221 59 1 000 1.000 1.000 1.000 227.07 0.551 0.551 0.551 0.554 232 55 0.266 0 272 0.264 0.271 238.02 0.122 0.128 0.123 0126 243.50 0 050 0.057 0.053 0 057 Note: Base Metal Inner Radius = 221.59 cm Base Metal 1/4T = 227.07 cm Base Metal 1/2T = 232.55 cm Base Metal 3/4T = 238.02 cm Base Metal Outer Radius = 243.50 cm Table 6-7 Relative Radial Distribution of Iron Atom Displacements (dpa)

Within The Reactor Vessel Wall RADIUS AZIMUTHAL ANGLE (cm) 00 150 300 450 221.59 1.000 1.000 1 000 1.000 227.07 0.629 0.636 0 628 0.635 232 55 0.373 0.390 0.373 0.386 238.02 0.214 0.233 0.219 0.231 243.50 0.104 0.124 0115 0.129 Note- Base Metal Inner Radius = 221.59 cm Base Metal 1/4T = 227.07 cm Base Metal 1/2T = 232.55 cm Base Metal 3/4T = 238.02 cm Base Metal Outer Radius 243.50 cm Millstone Unit 2 Capsule W-83

6-17 Table 6-8 Calculated Fast Neutron Exposure of Surveillance Capsules Withdrawn from Millstone Unit 2 Cumulative Neutron Fluence Iron Atom Irradiation Time (E > 1.0 MeV) Displacements Capsule [EFPY] [nrcm 2] [dpa]

W-97 3.0 3.24E+ 18 4.96E-03 W-97 Supplemental 5.0 7.62E+ 18 1.10E-02 W-104 10.0 9.49E+18 1.41E-02 W-83 15.3 1.74E+ 19 2.58E-02 Table 6-9 Calculated Surveillance Capsule Lead Factors Capsule ID And Location Status Lead Factor11 1 W-97 (70) Withdrawn EOC3 1.40 W-97 Supplemental (70) Inserted BOC6- Withdrawn EOCI 0 1.28 W-104 (140) Withdrawn EOC10 0.95 W-83 (70) Withdrawn EOC14 1.31 W-263 (70) In Reactor 1.31 W-277 (70) In Reactor 1.31 W-284 (140) In Reactor 0.97

[I Lead factors for capsules remaining in the reactor are based on cycle specific exposure calculations through the current operating fuel reload. i e . Cycle 15.

Millstone Unit 2 Capsule W-83

7-1 7 SURVEILLANCE CAPSULE REMOVAL SCHEDULE The following surveillance capsule removal schedule meets the requirements of ASTM El 85-82 and is recommended for future capsules to be removed from the Millstone Unit 2 reactor vessel.

Table 7-1 Millstone Unit 2 Reactor Vessel Surveillance Capsule Withdrawal Schedule Notes (a) Effective Full Power Years (EFPY) from Plant Startup.

2 (b) Capsule W-263 should be removed before it receives a fluence of 4.80 x 1019 n/cm (E> 1.0 Mev) 2 (i e. twice the peak vessel EOL surface fluence of 2.40 x I0'9 n/cm (E>I.0 MeV)). Capsule W-263 2

will reach a fluence of approximately 2.40 x 1019 n/cm (E>l.0 MeV) at 23.2 EFPY. This is equal to the reactor vessel peak surface fluence of 2.40 x 1019 (E>1.0 MeV) at 32 EFPY.

(c) The schedule above has Capsule W-263 as the EOL Capsule, however, Capsule W-277 could be withdrawn in place of W-283 since they have the same Lead Factor.

Millstone Unit 2 Capsule W-83

8-1 8 REFERENCES

1. Combustion Engineering Report CENPD-53 "Summary Report on Manufacture of Test Specimens and Assembly of Capsules for Irradiation Surveillance of Millstone Point - Unit 2 Reactor Vessel Materials", September 1, 1972.

2. Combustion Engineering Report TR-N-MCM-008 "Northeast Utilities Service Company Millstone Nuclear Unit No 2 Evaluation of Irradiated Capsule W-97 Reactor Vessel Materials Irradiation Surveillance Program", April 1982.

3. B&W Nuclear Service Company Report BAW-2142 "Analysis of Capsule W- 104 Northeast Nuclear Energy Company Millstone Nuclear Power Station, Unit No 2 Reactor Vessel Material Surveillance Program", November 1991.

4.Section XI of the ASME Boiler and Pressure Vessel Code, Appendix G, FractureToughness Criteria for ProtectionAgainst Failure,Dated December 1995, through 1996 Addendum.

5. ASTM E208, Standard Test Methodfor ConductingDrop-Weight Test to Determine Nil-Ductility Transition Temperature of FerriticSteels, in ASTM Standards, Section 3, American Society for Testing and Materials, Philadelphia, PA.

6. 10 CFR 50, Appendix H, "Reactor Vessel Material Surveillance Program Requirements", Federal Register, Volume 60, No. 243, dated December 19, 1995.

7. ASTM El 85-82, Standard Practicefor Conducting Surveillance Tests for Light-Water Cooled NuclearPowerReactor Vessels, E706 (IF), in ASTM Standards, Section 3, American Society for Testing and Materials, Philadelphia, PA, 1993.

8. ASTM E23-98, "Standard Test Method for Notched Bar Impact Testing of Metallic Materials",

ASTM, 1998.

9. ASTM A370-97a, "Standard Test Methods and Definitions for Mechanical Testing of Steel Products", ASTM, 1997.

10. ASTM E8-99, "Standard Test Methods for Tension Testing of Metallic Materials", ASTM, 1999.

11. ASTM E21-92 (1998), "Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials", ASTM, 1998.

12. NUREG/CR-6413 ORNL/TM-13133 "Analysis of the Irradiation Data for A302B and A533B Correlation Monitor Materials" Oak Ridge National Laboratory, Prepared by J. A. Wang.

13. Regulatory Guide 1.99, Revision 2, May 1988, "Radiation Embrittlement of Reactor Vessel Materials"

14. ASTM El 85-73, "Standard Recommended Practice for Surveillance Tests for Nuclear Reactor Vessels" Millstone Unit 2 Capsule W-83

8-2

15. ASTM E83-93, Standard Practice for Verification and Classification of Extensometers.

16. Regulatory Guide RG-1.190, "Calculational and Dosimetry Methods for Determining Pressure Vessel Neutron Fluence," U. S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, March 2001.

17. WCAP-14040-NP-A, Revision 2, "Methodology Used to Develop Cold Overpressure Mitigating System Setpoints and RCS Heatup and Cooldown Limit Curves," January 1996.

18. WCAP-15557, Revision 0, "Qualification of the Westinghouse Pressure Vessel Neutron Fluence Evaluation Methodology," August 2000.

19. RSICC Computer Code Collection CCC-650, "DOORS 3.1, One, Two- and Three-Dimensional Discrete Ordinates Neutron/Photon Transport Code System," August 1996.

20. RSIC Data Library Collection DLC-185, "BUGLE-96, Coupled 47 Neutron, 20 Gamma-Ray Group Cross Section Library Derived from ENDF/B-VI for LWR Shielding and Pressure Vessel Dosimetry Applications," March 1996.

21. Millstone Calcnote 95-SDS-1007MB "Calculation of Initial Properties for the MP2 and MP3 Reactor Vessels."

Millstone Unit 2 Capsule W-83