ML090410143
| ML090410143 | |
| Person / Time | |
|---|---|
| Site: | Indian Point  |
| Issue date: | 02/01/2008 |
| From: | Entergy Nuclear Operations |
| To: | NRC Region 1 |
| John Richmond | |
| References | |
| EN-WM-101, Rev 3 | |
| Download: ML090410143 (52) | |
Text
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 1 OF 52On-line Work Management ProcessProcedure Contains NMM REFLIB Forms: YES NOEffectiveDate2-1-2008Procedure Owner:Title: Site:Dennis J. LegereDirector Outages andWork ControlHQNExecutive Sponsor:Title: Site: Joe DeRoyVP OPS SupportHQNException Date*SiteSite Procedure ChampionTitle ANOJames HoffpauirPS&O ManagerN/A BRPGGNSMatt RohrerPS&O Manager IPECJoe DiChiaraPS&O Manager2-22-2008 JAFDave WallacePS&O Manager PNPSArnie OwensPS&O Manager PLPMarty RicheyPS&O Manager3-1-2008 RBSBrent MathernePS&O Manager VYChris WamserPS&O Manager W3Greg FeyPS&O ManagerHGNDennis LegereDirector Outages and Work ControlSite and NMM Procedures Canceled or Superseded By This RevisionEN-WM-101 rev 2Process Applicability Exclusion: All Sites:Specific Sites: ANO BRP GGNS IPEC JAF PLP PNPS RBS VY W3Change StatementThis revision is an administrative change to identify applicability of this procedure to Palisades and tocorrect administrative errors on the cover page.JAF and RBS exception dates are dictated by site specific business strategies and changemanagement plans, included but not limited to transition from Outages and major maintenanceactivities.*Requires justification for the exception N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 2 OF 52On-line Work Management Process__________________________________________________________________________TABLE OF CONTENTSSection Title Page1.0PURPOSE................................................................................
32.0REFERENCES
.........................................................................33.0DEFINITIONS...........................................................................34.0RESPONSIBILITIES.................................................................65.0DETAILS................................................................................156.0INTERFACES.........................................................................357.0RECORDS.............................................................................358.0OBLIGATION ANDREGULATORYCOMMITMENTCROSSREFERENCE.........................................................................359.0ATTACHMENTS.....................................................................3510.0 SUPPLEMENTS----------.----------35 ATTACHMENT9.1 O N-L INE EMERGENT W ORK ADDITION/DELETION APPROVAL FORM CRITICAL EVOLUTION , IDENTIFICATION.........................................36 ATTACHMENT9.2 DAILY W ORK CONTROL MEETING A GENDA SINGLE U NIT.............................................37 ATTACHMENT9.3 DAILY W ORK CONTROL MEETING A GENDA D UAL UNIT..............................................38 ATTACHMENT9.4 A C RITICAL EVOLUTIONS MEETING A GENDA-.39 ATTACHMENT9.4 B C RITICAL EVOLUTIONS MEETING FORMAT-.40 ATTACHMENT9.4 C C RITICAL EVOLUTIONS MEETING PRESENTERS CHECKLIST AND PRESENTATION FORMAT-.41 ATTACHMENT9.4 D C RITICAL EVOLUTIONS OPERATIONS READINESS C HECKLIST--------------43 S UPPLEMENT 1 C RITICAL EVOLUTION , IDENTIFICATION AND C HALLENGE MEETING---------.
44__________________________________________________________________________
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 3 OF 52On-line Work Management Process1.0 PURPOSE[1] To describe the on-line work management process used to schedule, plan, prepare andcomplete work activities.[2] The guiding principles of the On-Line Work Management process are as follows: To ensure nuclear safety by providing timely identification, selection, planning,coordination, and execution of work necessary to maximize the availability andreliability of station equipment and systems To manage the risk associated with conducting work To identify the impact of work to the station and work groups and to protect thestation from unanticipated transients due to the conduct of work. To maximize the efficiency and effectiveness of station staff and material resources.
2.0 REFERENCES
[1] 10 CFR 50.65(a)(3) and (a)(4)[2] EN- WM-100, " Work Order Identification, Classification, and Screening"[3] NMM, Operating Experience OE-100, "Operating Experience Program"[4] NEDC 32501, "Risk Management of On-line Maintenance"[5] INPO 97-013, "Guidelines for the Conduct of Maintenance at Nuclear Power Stations"[6] INPO Guideline AP-928, "Work Management Process Description3.0 DEFINITIONS[1] Carryover Work - Work not completed during the scheduled implementation week.Carryover work is continued into the subsequent week subject to Work Week Managerapproval.[2] Divisional/Safety Train Work Period - Time period when work is scheduled on adesignated Engineered Safeguard Features (ESF) safety train or division. Work isexcluded on the other train(s), which are protected. The divisional/safety train workperiods should support any staggered surveillance testing requirements.[3] Emergent Work - is any work that is added to the work schedule during executionweek. This classification will not include FIN.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 4 OF 52On-line Work Management Process[4] Indus Asset Suite (IAS) - A computer-based software system that manages theidentification, planning, performance, and archiving of the summary of maintenancework activities. IAS includes links to the material management, drawing and documentprogram, and other interfaced computerized systems.[5] Key System Health - Work requests or work orders whose implementation is essentialto resolve a deficiency that complicates system performance, causes or increasessingle failure vulnerability, or increases the vulnerability to failure to the system or otherkey components. These are typically work requests or work orders called outindividually in system health reports or SPI, and whose completion will directly causesystem health color to improve.[6] Minor Maintenance- As defined in EN-WM-105, Planning.[7] Package Acceptance - Acknowledgement of satisfactory work order content andsupport requirements (performed by the group responsible for implementing work).[8] Protected Train/Division - Designated set of systems and components that share thesame operable power supply and are required to support key safety functions during aDivisional/Safety train work period. Work is excluded on the Protected Train/Division(s)during the work period, unless specifically approved by Operations. A ProtectedTrain/Division includes all necessary attendant instrumentation, controls, normal andemergency electrical power sources, cooling and seal water, lubrication and auxiliaryequipment required for the train or division to perform its specified functions.[9] Risk Mitigation Plan - A documented set of actions to be taken to reduce the risk ofperforming maintenance which meets the criteria of step 5.2 [4]. The Risk MitigationPlan is developed by personnel knowledgeable on the specific maintenance and the riskit imposes. Documentation may be stand alone, included in the work order, or both.The depth of detail required is maintenance specific, and determined by the personneldeveloping the plan.[10] Schedule Adherence - Schedule adherence measures the work management team'sability to execute scheduled work. Schedule Adherence is derived from the totalactivities scheduled from Monday 0000 through Sunday 2400 of week T0. ScheduleAdherence percentage = (total completed schedule activities/total scheduled activities) *100. All activities identified as graded schedule Level 3 and higher are included in theschedule adherence calculation. Adherence of a workweek includes tasks job typecoded as corrective maintenance, elective maintenance, other maintenance, PM's, andsurveillances; at the task level.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 5 OF 52On-line Work Management Process[11] Scope Stability - Scope stability measures the work control management team's abilityto identify, plan, and schedule work. Scope of a workweek includes tasks job typed ascorrective maintenance, elective maintenance, other maintenance, PM's, andsurveillances in that week. Stability is measured from T-6 through T-1 at the work ordertask level to ensure consistency. (Scope [T-6] - (Losses [T T-1] + Additions [T T-1]) / Scope [T-6]) Where: T-6 = Scope after T-6 meeting changes are incorporated into the schedule. T-1 = The end of the week prior to execution week. For the purposes of additional scope change analysis, stability may be measuredfrom T-15 to T-6. (Scope [T-15] - (Losses [T T-6] + Additions [T T-6]) / Scope [T-15])Where:T-15 = Scope after T-15 meeting changes are incorporated into the schedule.[12] System/Component Maintenance Window -Time period scheduled for performing workon a specific system or component. The time period is selected to correspond with thedue dates for preventive maintenance work activities on specific components in thesystem; or is selected so that the specific system has a repeating window based on apre-determined multiple of the Cycle Schedule.[13] System Outage Coordinators - Coordinators assigned by the PS&O Manager that are asingle point of contact for preparation and implementation of major, complex system outages.[14] Walk Down- Review of future work i.a.w the requirements of EN-MA-101, by thediscipline that will perform the work. The implementing department determines whichwork order tasks need to be walked down.[15] Critical Evolution - An evolution that has the potential to challenge the ability to continuesafe operation of the unit, or significant ALARA or personnel safety challenges.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 6 OF 52On-line Work Management Process[16] Work Management Team - A group composed of representatives from site departmentswith key roles for on-line maintenance/modification activities including: coordination ofwork activities, implementation and support of work, and resolution of coordinationissues etc. At a minimum, the following site departments are members of the WorkManagement Team: Work Week Manager Operations Work Management Center Mechanical Maintenance Electrical Maintenance Instrumentation and Control Maintenance Facilities Support/Modifications (as required) Engineering Radiation Protection Chemistry (as required) Materials (as required) Scheduling Planning[17] Work Week - The work week for which a schedule is developed runs from 0000 onMonday through 7 days to 2400 on Sunday. Work Week Manager turnover normallyoccurs on the applicable Monday morning.4.0 RESPONSIBILITIES[1] Meeting alternates are required to perform the same pre-meeting preparation as thenormal meeting attendees. Normal meeting attendees provide their alternates with theinformation/data need to perform that preparation.[2] The Director PS&O is responsible for maintenance of this procedure.[3] The General Manager, Plant Operations is responsible for direction and oversight toensure programs are developed, implemented, and administered for the control of work.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 7 OF 52On-line Work Management Process[4] Planning Scheduling & Outage (PS&O) Manager, or designee provides oversight anddirection for consistency in the following: Performing risk evaluation during schedule development and for performing riskevaluation in response to schedule changes during implementation week (T0). Coordinating and aligning station organizations to achieve full engagement in thework management process. Selecting initial work / resource levelization for scheduled work weeks. Consistently prioritizing identified work. Planning work packages in accordance with on line process milestones to supportscheduled work. Developing the schedule. Coordinating system outages in the designated work window. Ensuring the Work Management Process is effective at risk evaluation andmanagement of scheduled activities. Coordinating allowed outage time (AOT) to minimize out of service time.[5] Planning Scheduling & Outage (PS&O) Manager, or designee is responsible for thefollowing: Providing approval authority for retention of work on the schedule past T-2 when IASholds have not been cleared. Providing approval authority for addition of work to the schedule after T-2 schedule freeze. Assigning system outage coordinators.[6] Operations Manager, or designee, provides oversight and direction for consistency inthe following: Removing plant equipment from service for scheduled and emergent work activities. Concurring that the Work Management Process is effective at risk evaluation andmanagement of scheduled activities. Evaluating and managing risk due to external events and emergent issues.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 8 OF 52On-line Work Management Process Developing tag outs to place equipment in a safe condition to perform work. Performing IAS Operations Impact Assessment of work order tasks. Interacting with personnel in the scope development process. Ensuring Operations work activities are executed per the schedule.[7] Maintenance Manager, or designee, provides oversight and direction for consistency inthe following: Facilitating review and acceptance of corrective and elective, compliance workpackages, and document in IAS. Providing resources to implement the scheduled and emergent maintenanceactivities. Providing adequately trained personnel in the initial scope development process andthe various work management process meetings. Providing sufficient support for the FIN team. Providing constructive feedback to PS&O on the execution of all work activities. Providing effective feedback for repetitive tasks. Ensuring work order tasks are statused or progressed each shift as appropriate. Ensuring productivity is maximized to support the execution of work. Ensuring Maintenance work activities are executed per the schedule.[8] Maintenance Coordinator or designee is responsible for the following: Representing the maintenance organization by owning and resolving issues relatedto their craft discipline. Assuring all identified parts are available and ready for installation. Contacting the Work Week Manager when obstacles to performing work cannot beresolved promptly and providing status on work not performed per the schedule. Anticipating manpower, support and resource requirements.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 9 OF 52On-line Work Management Process Assuring adequate manpower, procedures, job qualifications, support and specialtyitems are input during the schedule development process. Working closely with scheduling to insure development of an accurate schedule. Providing work preparation and execution input to the work week critique report. Ensuring that work orders requiring walkdown are identified.[9] First line Supervisor is responsible for the following: Contacting the Work Week Manager when obstacles to performing work cannot beresolved promptly and providing status on work not performed per the schedule. Completing all preparations to perform the work and completing the work asscheduled. Ensuring work order tasks are statused or progressed each shift as appropriate. Assuring all hand-offs are successfully executed.[10] Planning Supervisor is responsible for oversight and direction for: Ensuring the quality of work packages as defined in WM-105. Planning of jobs as priorities that are identified at the work scope meeting andproviding planned packages to shops in accordance with T-meeting milestones. Identifying required parts, engineering and support. Documenting component impact statements on work order tasks in IAS that detailequipment effects. Identifying tagging requirements on work order tasks. Revising work packages in a timely manner to support the schedule as conditions change. Identifying needed reviews on initial packages and revisions. Recommending Post Maintenance and Functional testing.[11] Online Maintenance Scheduling Superintendent is responsible for oversight anddirection for: Preparing, updating, revising and issuing P3e work schedules, IAW EN-WM-109.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 10 OF 52On-line Work Management Process Progressing the schedule daily (Data date is moved to current day). Maintaining down power scope. Managing the scheduling of surveillances and PM's as close to the due dates aspossible not to exceed the late date. Identifying maintenance/system outages that require detailed schedules. Working with the discipline coordinators to ensure effective utilization ofmaintenance resources. Grouping work activities to optimize equipment availability and resource usage.[12] Shift Manager interfaces with the Work Management process and is responsible for thefollowing: Chairing the Daily Work Control Meeting. Assist Work Week Manager in determining priorities in conjunction with FIN TeamSupervisor.[13] Operations Work Control representative or designee interfaces with the WorkManagement process and is responsible for the following: Identifying work orders with the appropriate plant effect codes to assist the workmanagement team with proper work prioritization. Providing consistent input to theweekly schedules regarding Operations' priorities. Working with control room personnel to reconfigure systems/components as neededfor scheduled items. Assuring required tag outs are prepared and hung as necessary to supportscheduled activities. Preparing Operations shift personnel for scheduled work. Interfacing with the Work Week Manager and the Shift Manager during thescheduling, planning, and execution of work activities. Reviewing post maintenance test(s) for return to service, operability, andcoordinating the performance of the post maintenance tests. Reducing distractions to the control room staff by communicating with groupsconcerning daily work.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 11 OF 52On-line Work Management Process Performing IAS Operations Impact Assessment of appropriate work order tasks in IAS. Providing work preparation and execution input to the work week critique report.[14] Engineering Managers or designee provides oversight and direction for consistency inthe following: Optimizing preventive maintenance by systematic review of repetitive tasks. Identifying and coding Key System Health work orders to assist with proper workprioritization. Providing support for resolution of system problems duringmaintenance. The System Engineer has primary responsibility for system reliability. Identifying reduced margin to equipment out of service time goals. Managing equipment unavailability time, including identification of work orders wherethe work to be performed renders the equipment unavailable and determination ofplant conditions that change equipment availability requirements, in order to assistwith prudent equipment maintenance scheduling. Assuring Engineering resources are available to support scheduled work. Assisting in development of detailed schedules for maintenance/system outages,and/or plant power maneuvers. Providing input for scheduled maintenance to improve system and equipment reliability. Preparing and approving engineering documents needed to support work activities. Supporting the planning organization through the resolution of engineering issues. Ensuring Engineering work activities are executed per the schedule.[15] Radiation Protection Manager or designee provides oversight and direction forconsistency in the following: Completing Radiation Work Permits to support scheduled work. Providing Radiation Protection and Radwaste support for scheduled work. Performing timely ALARA reviews and providing input to the work preparationprocess to support scheduled work.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 12 OF 52On-line Work Management Process Executing the schedule as written and notifying the Work Week Manager of any delays. Maintaining radiological instrumentation and dosimetry to support scheduled work.[16] Chemistry manager or designee provides oversight and direction for consistency in thefollowing: Executing the schedule as written and notify the Work Week Manager of any delays. Providing Chemistry support for scheduled work. Ensuring appropriate Chemistry activities are contained in the schedule.[17] Material, Purchasing and Contracts Manager or designee provides oversight anddirection for consistency in the following: Obtaining parts, materials, and contract services to support scheduled work. Maintaining inventory in a ready to use status. Providing accurate status of material holds at countdown (T-) meetings. Actively participating in the schedule development and planning process.[18] Work Week Manager - Functions as the project manager for the respective workperiod. During execution weeks, the Work Week Manager is the ultimate authority forexecuting work according to the schedule and is the focal point for communication ofdelays and changes to scheduled activities. Work Week Manager has a comprehensiveknowledge of the scheduled work scope and is responsible for the following: Ensuring that the risk associated with performing work has been properly assessedand actions taken to minimize risk are completed. Primary contact for On Shift Operations crew for off hours support. Ensuring Operations integration and acceptance of the work schedule prior to thework week. Understanding the interactions between work groups; coordination and handoffs thatmust occur to effectively implement work. Understanding activity sequencing as it relates to managing risk and minimizingequipment unavailable time.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 13 OF 52On-line Work Management Process Interfacing with all disciplines and appropriate organizations to facilitate and drivethe completion of scheduled work. Ensuring the execution schedule is updated and posted to the web each working day. Understanding work priority / importance; deciding work that will be emerged andplaced on the schedule; analyzing the impact of emergent work and communicatingto the responsible organization which work will be dropped, and deciding if work willbe carried over into the next day or work week. Emergent problem resolution. Providing work preparation and execution input to the work week critique report andensuring that it is drafted and issued. Providing status of scheduled activities to Forced Outage Response Team duringoutage response.[19] Unit Coordinator is responsible for: Establishing and maintaining the cycle schedule. Developing baseline scope for equipment outages. Bundling work in support of T-15 work review / selection meeting. Developing and maintaining a rolling period based cycle plan based on PM duedates, surveillance due dates, work bundling, training and site commitments. Minimizing equipment unavailability through work bundling. Ensuring work schedules are developed with consideration given to priority work asidentified by System Engineering, Operations, and Maintenance. Identifying maintenance/system outages/plant power maneuvers (i.e., down powers,etc.) that require detailed schedules. Preliminary development and management of the schedule during the scopingportion of the work management process. Providing detailed schedule development between T-15 and T-10. Presiding over the work screening and classification meeting, as well as the actingas the primary chairman for the T-10 meeting.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENTMANUAL INFORMATIONAL U SEPAGE 14 OF 52On-line Work Management Process Providing need date and basis for new WR where the proposed schedule date is inside T-15.[20] The System Outage Coordinator is responsible for: Determining the need for and scheduling system outage meetings as appropriateAssigning and tracking action items from system outage coordination meetings inorder to ensure timely issue resolution. Acting as a focal point for all outage activities. Providing management oversight of system outage performance, including workcoordination, implementation, support needs, post maintenance testing, and problemresolution. Capturing success information and lessons learned in post system outage critiques. Communicating outage status and any delays to Work Week Manager duringsystem outage implementation. Ensuring that adequate contingency planning is in place to minimize the adverseimpact of expanded scope due to scheduled equipment inspection results. Providing work preparation and execution input to the work week critique report.[21] The FIN Team is responsible for performing tasks to protect the Frozen Work Schedulefrom emergent work activities, thus allowing the normal Electrical, Mechanical, and I&Cshops to execute the work week schedule as planned. FIN work is selected on a dailybasis with priorities being determined by the Shift Manager, Work Week Manager andFIN Team Supervisor.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 15 OF 525.0 DETAILS5.1 PRECAUTIONS AND LIMITATIONS None5.2 ON-LINE SCHEDULE RISK GUIDELINES[1] The on-line work management process is designed to minimize plant risk through ablended approach of quantitative and qualitative risk assessment, minimizing on-lineWork Order backlog, and maximizing equipment performance and material condition.Entergy places a high priority on completing maintenance activities as scheduled, to ensurethat changes to the scheduled risk profile are minimized.[2] The implementation week schedule should be followed unless a condition arises thatrequires deviating from or suspending scheduled work. Examples of conditions whichmay require a schedule change include: Emergent Limiting Condition for Operation (LCO/AOT) action statements that conflictwith scheduled work. Equipment failures causing a loss of capacity or affecting the operability of theProtected Train/Division. Off site transmission system failures or System conditions endangering electricalgrid stability. Emergent maintenance issues that raise on line scheduled risk to unacceptablelevels. External events such as adverse weather.[3] Quantitative and qualitative methods are used to evaluate scheduled on-line risk.Qualitative risk assessment begins when scheduling first puts the initial scheduletogether, and continues throughout the process. As risk is evaluated during scheduledevelopment, the schedule is revised, if necessary, to achieve an acceptable riskprofile. Formal risk assessment begins at T-6 with the review per 5.2 [4] below, and iscompleted by T-2. Emergent work is evaluated for the risk impact of performance of thework. The goal of the online work management process is to minimize overall risk andpromote equipment reliability.[4] The Work Management Team performs qualitative on-line risk assessment during theon-line work management process. If any statements below are applicable, theappropriate Work Management Team members develop a Risk Mitigation Plan for theassociated activity:
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 16 OF 52 Activity would significantly increase the possibility of a plant transient such as:Engineered Safety Features Actuation, Reactor or Turbine Trip, Reactor Powerdecrease, etc. Maintenance activity will affect ability to manage reactivity. Activity involves work which could result in a loss of a major Bus or load center. Activity involves work that will require a reduction in power. Activity duration is scheduled to be 50% of the allowable Tech Spec/TRM ActionStatement requiring a Shutdown. Activity creates an increased likelihood of a trip condition by eliminating installedredundancy (e.g., Condensate Pumps, Condensate Booster Pumps, EHC pumps). Activity would degrade the ability of Operations to control the plant (e.g., place theplant in an off-normal configuration). Activity would increase grid instability in combination with external events.5.3 ON-LINE SCHEDULE DEVELOPMENT[1] The schedule is developed from the following activities considering the risk ofperforming the maintenance on-line: : Surveillance tests required by plant Technical Specifications System/Component outages Corrective Maintenance (CM), as defined in WM-100 Preventive maintenance (PM) program requirements Elective Maintenance, as defined in WM-100 Refuel Outage Preps Plant Modifications Other Maintenance, as defined in WM-100 N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 17 OF 525.4 THE ON-LINE SCHEDULE PROCESS[1] The On-Line schedule process utilizes a consistent schedule of reviews and workpreparation activities to ensure readiness to perform work as scheduled during T0Implementation Week. Section 5.6 includes a detailed flow chart for the online workmanagement process. The table below shows the timeframe for the scheduledevelopment and implementation critique process. Activities for each week are to becomplete by the last working day of that week.WeekTimelineWeek T-24 Preventive Maintenance optimization meetingWeek T-16 Repetitive Task Work orders auto generatedWeek T-15 Preliminary Scope development meeting /resource assignmentWeek T T-11 Schedule adjusted based on T-15 input Commence work package development Parts and material orders initiated Assignment of System Outage CoordinatorsWeek T-13 Engineering issue identification complete & to EngineeringWeek T-10 Preliminary work schedule developed Work Management Team schedule review meeting Material orders completed Engineering holds related to planning details resolved Modification installation details complete & to PlanningWeek T-9 Planning Complete. Generic tag-out requirements identifiedWeek T-8 Complete review and acceptance of corrective and elective,compliance work packages, and document in IAS. Perform tag out ESOMS assignmentsWeek T-7 Complete IAS Operations Impact Assessment,communications requirements, OPS hold for completionreview.Week T-6 Freeze work scope and resources Work Management Team schedule review meeting Preliminary on-line schedule risk assessmentWeek T-5 Initiate tag out developmentWeek T-3 Complete and approve equipment tag outs All restraints resolved / all materials on hand / Pkg READYWeek T-2 Freeze the work schedule Work Management Team schedule review meeting Perform schedule risk assessment Print Work Pkg. docsWeek T-1 Validate / complete job preparationsWeek T0 Execute work as scheduledWeek T+1 Critique the previous work period N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 18 OF 52The tables below show the recommended schedule for the T process meetings for single unit,dual unit sites with unitized maintenance departments, and dual unit sites without unitizedmaintenance departments. T minus meeting attendees bring the schedule they used formeeting preparation to each meeting. During certain circumstances, such as outages orholidays, it will be necessary to adjust the meeting schedule.Single Unit & Non-Unitized Dual Unit T Process Meetings TuesdayWednesdayThursday T-10 and T-2 T-6T+1; T-15, and T-24Unitized Dual Unit T Process Meetings TuesdayWednesdayThursdayT-6 for both UnitsT-10 and T-2 for both UnitsT+1; T-15, and T-24[2] T-24 Repetitive Task Review Meeting.The T-24 repetitive task review meeting is led by Engineering to systematically reviewrepetitive tasks for the purpose of optimizing the repetitive task program. Task changesare tracked to completion by the PM Coordinator prior to T-18 to ensure onlyappropriate tasks enter the work control process.The T-24 Review Committee is comprised of: Engineering (Chairperson) Operations Work Management Center representative Maintenance Coordinator (Mechanical, Electrical, I&C) Scheduling representative PM Coordinator N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 19 OF 52 A standard fleet WEB based task (PMRQ) report will be made available tocommittee members by the PM Coordinator prior to the meeting. The report willexclude surveillance tasks and repetitive tasks performed quarterly or morefrequently. The work order feedback process in conjunction with the Action Trackingprocess will make necessary adjustments to those tasks. Committee members will review the task report prior to the meeting and prepare taskchange recommendations (and basis) for meeting discussion. Engineering reviews PM template for appropriate performance interval, componentclassification (criticality) and impact to equipment reliability. Maintenance Coordinator reviews tasks for appropriate content and performanceinterval based on knowledge of equipment history. Operations reviews tasks for on-line/outage performance, component classification(criticality), duty cycle, plant impact, usage with respect to Tech Spec compliance,and operator logs Scheduling reviews for appropriate on-line/outage performance and provides inputto performance interval changes that support bundling of related work. PM Coordinator provides insight to the team based on their experience withequipment history and previous feedback. They are responsible for administeringtask changes recommended by the committee[3] T-23 to T-16 WeeksScheduling provides preliminary P3eschedule by T-16 to System Engineering andother T-15 meeting attendees.Changes recommended by T-24 committee are to be processed by T-18.[4] T-15 Preliminary Scope Development MeetingThe T-15 meeting is led by Engineering to ensure that work selection/scoping is a teamdecision focused on safe plant operation through equipment reliability. Schedulingprovides the preliminary P3eschedule report based upon known resource availability, PMand surveillance tasks, equipment outages, equipment modifications, refuel outagepreparations, and bundled work activities. The T-15 Preliminary Scope Review Team iscomprised of: System Engineering (Chairperson) Operations Work Management Center representative Maintenance Coordinators N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 20 OF 52 Unit CoordinatorWEB based backlog reports that display open work by system, OPS Aggregate Indexitems, Predictive watch list, Key System Health, are reviewed prior to the meeting byrespective participants to identify potential scope additions key to safe operation andequipment reliability.The preliminary work scope is reviewed to: Remove scope that does not accurately reflect station priorities and goals. Add scope that accurately reflects station priorities and goals. Establish a scope that is acceptable for on line performance. Ensure commitment exists to clear work order holds prior to T-3. Ensure work is scheduled in the appropriate train week. Ensure work is bundled appropriately. Evaluate risk considerations of proposed scope. Examine resource loading to ensure efficient use of station resources. The desiredresource loading target is approximately 100%.Engineering provides priority input to schedule scope considering key system healthindicators, maintenance rule unavailability, predictive watch list, system performanceindicators, etc.Operations provides priority input to schedule scope considering OPS aggregate index,watch station priorities, risk consideration, etc.Maintenance Coordinators - Provide resource availability by T-18 as input to the T-15decision process. They make scope addition/ deletion recommendations based uponreview of backlog, assigned priority, work bundling and resource requirements,including outside demands on resources for the week, such as continuing training, drills,resource sharing, vacations, all-hands meetings, etc.The Unit Coordinator ensures scheduled work is appropriately bundled andcommunicates / resolves work bundling issues with the team. If not already performed,they initiate an IAS action request for the work week, and provide oversight forresolution of issues until the T-10 week.After the T-15 meeting, Scheduling updates the schedule scope based on meetingdecisions and posts the preliminary P3eschedule scope report to the web.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 21 OF 52An IAS Action Request assignment will be made to address items deferred from theschedule after T-15 that have an IAS Plant Effect assignment.[5] T-14 to T-11 WeeksCommence work package planning. Work packages requiring extensive engineeringinput to complete planning details should be identified and the request for informationbe made as soon as possible.Long Lead parts and material ordered as identified during work package planningMaintenance Coordinators continue to review resource loading and work withScheduling to appropriately adjust scope.The P&S/O Manager will designate System Outage Coordinators for major, complexsystem outages.[6] T-13 WeekPlanning identification of needed extensive Engineering input is complete, and isprovided to Engineering.[7] T-11 WeekScheduling disseminates a standard P3eschedule to Work Management Teammembers for T-10 meeting preparation.[8] T-10 Work Management MeetingThe T-10 Work Management meeting is chaired by the Unit Coordinator or Work WeekManager( alternate) who communicates risk, equipment outages and other informationrelated to schedule construction. The T-10 meeting focuses on understanding andtaking action on the needs and preparation details which must be addressed in order toretain and complete scheduled maintenance.Meeting action items are assigned to responsible departments to resolve unique issueswhere an IAS hold (parts, tag outs, etc.) on the Work Order Task does not appropriatelyidentify the issue. The Online Maintenance Scheduling Superintendent providesoversight for resolution of issues until the T-6 week.Meeting attendees will review the schedule thoroughly prior to the meeting in order tomeet their responsibilities during the meeting. The T-10 Work Management Meeting isattended by: Online Maintenance Scheduling Superintendent Operations Work Management Center representative N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 22 OF 52 Maintenance Coordinators Planning Supervisor Facilities Support/Modifications Representative (if applicable) Engineering Representative Radiation Protection Representative Materials Representative Scheduler(s) Work Week Manager / Unit Coordinator System Outage Coordinator (if applicable)Chemistry is not required to attend, however they may attend when there is an issuethey wish to champion.The preliminary work schedule is reviewed by the team at the T-10 meeting, which willinclude the following: Identification of potential industrial safety issues. Identification of Work Week and Division Week. Identification of system/component outages. Adjustments required based on maintenance and operations needs and projectedresources. Identification of restraints to completion of scheduled work. Identification of activities that conflict with the protected train for the week. Adjustments required to levelize the schedule based on daily resource availability. Adjustments required to coordinate manpower, skills, and equipment down time. Identification of activities which do not have a separate work order task that need tobe included in the schedule to ensure successful schedule implementation.The P&S/O Manager will designate System Outage Coordinators for component outages.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 23 OF 52The Planning Supervisor will report the status of work order tasks still in planning, andresolution of any IAS holds.MP&C reports status of materials for work orders showing Parts Hold, givesrecommendations based on parts delivery dates, and will have obtained an estimate ofany parts requirements for packages that are still in the planning stage. This will beaccomplished early in the meeting and MP&C will be dismissed.Engineering reports status of applicable ECR's for work orders that have an ECR hold,and will have obtained an evaluation of any engineering requirements that may benecessary for packages that are still in the planning stage. The Engineeringrepresentative will also report status of any Procurement Engineering holds on parts.Maintenance Coordinators review the scheduled work for changes and communicatewith the discipline scheduler to ensure proper resource loading of the schedule prior tothe meeting.Facilities Support/Modifications is responsible for providing input on any plantimprovement activities, and any modifications scheduled for the week.The Operations Work Management representative will have reviewed the schedule toidentify tagging requirements, LCO activities, WO conflicts with plant operationalmodes, scheduled WO demands on Operations resources, and activities that affectPlant Risk Index.The Radiation Protection representative will review the schedule for work in the RCA inorder to provide preliminary dose estimates for the week, to identify the need for specialRWP's, and to identify any RP/Radwaste support activities requiring additionalresources or preparation. The deadline for completion of RWP's and subsequentclearing of related IAS holds is T-3.The Unit Coordinator will have reviewed the schedule to ensure that PM's andSurveillances are scheduled within their due dates, identify any PM's that areapproaching late dates or are deep in the grace period, and verified that protected trainis maintained. The Scheduler(s) will also keep notes during the meeting on scheduleitems that are removed, rescheduled, etc. in order to update the schedule.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 24 OF 52[9] T-10 WeekPreliminary work schedule developed.Material orders completed.Engineering holds relative to planning details cleared.Modification installation details provided to planning.[10] T-9 WeekPlanning completes work package planning and identification of generic tag outrequirements.[11] T-8 weekMaintenance completes review and acceptance of corrective and elective, compliancework packages in accordance with EN-WM-102 Work Implementation & Closeout andEN-WM-105 Planning.Operations performs tag out ESOMS assignments.[12] T-7 WeekOperations completes the IAS Operations Impact Assessment, including communicationand OPS hold for completion review requirements and operability retest requirements.[13] T-6 Work Management MeetingThe Work Week Manager chairs the T-6 meeting with the Work Management Team.The team members' responsibilities for preparation and input for the T-10 meeting applyto the T-6 meeting. It is expected that all attendees have reviewed the schedule prior tothe meeting. The Work Management Team freezes the scope at the T-6 Meeting.Meeting action items are assigned to responsible departments in the work week's IASAction Request to resolve unique issues where an IAS hold (parts, tag outs, etc.) on theWork Order Task does not appropriately identify the issue. The Work Week Managerprovides oversight for resolution of issues until closeout of the IAS Action Request.The Work Management Team reviews the preliminary schedule including the following: Identification of potential industrial safety issues. Identification of activities which meet criteria of step 5.2 [4], on line risk assessment. Adjustments required based on maintenance and operations needs and projectedresources.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 25 OF 52 Identification of restraints to completion of scheduled work. Identification of potential Critical Evolutions.In addition to the T-10 meeting responsibilities, certain meeting attendees haveexpanded responsibilities.Work Week Manager identifies Work Week and Division Week and reinforcesexpectation to identify work in the schedule that does not meet the protected train orwork week. They identify system outages, level 1 schedule activities, and appropriate leads.Maintenance Coordinators are responsible for schedule adjustments based onmaintenance needs and projected resources. They are responsible for verification thatall support needs have been identified and that the schedule is resource loaded to anominal value of 100% of available man hoursOperations Work Management representative is responsible for schedule adjustmentsbased on operations resources, plant operations, plant risk index, etc.Discipline Schedulers will have reviewed the schedule to ensure that PM's andSurveillances are scheduled within their due dates, identify any PM's that areapproaching late dates or are deep in the grace period, and verified that protected trainis maintained. They will also keep notes during the meeting on schedule items that areremoved, rescheduled, etc. in order to update the schedule.Work is removed from the schedule if it is apparent that IAS holds cannot be cleared by T-3.For work where it is apparent that IAS holds cannot be cleared by T-3, the PS&OManager can choose to leave that work on the schedule when the work is critical toplant goals. In this situation actions must be assigned in the work week's IAS ActionRequest to ensure successful completion of the work.[14] T-6 WeekScheduling prepares a revised work schedule based on any changes to the schedulethat result from the T-6 meeting. Work scope and resources are frozen.Maintenance coordinator ensures the "Walkdown is complete?" IAS attribute isassigned to all tasks requiring walkdown.[15] T-5 WeekOperations begins preparation of tag outs to support the scope of work.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 26 OF 52Work Week Manager ensures on-line schedule risk assessment has been initiated.This includes qualitative and quantitative risk assessment as per step 5.2. Primaryinput to this process lies with the Operations representative due to their knowledge,experience, and training, however all Work Management team members provide inputas appropriate.[16] T-3 WeekOperations completes preparation of and approves tag outs to support the scope ofwork.All holds cleared, materials available, package ready.[17] T-2 Work Management MeetingThe Work Week Manager utilizes an IAS hold report to determine status of holds priorto the T-2 meeting.The Work Week Manager chairs the T-2 meeting. The Work Management Teamreviews the schedule for needed changes. The schedule review should be by exceptionfor each day and discipline. The Work Management Team freezes the work schedule atthe T-2 meeting.Planning and Materials representatives are not required to attend the T-2 meeting.Meeting action items are assigned to responsible departments in the work week's IASAction Request to resolve issues.Work is removed from the schedule if all IAS holds are not cleared.A condition report will be written for any work that is removed from the schedule due toIAS holds not being cleared by T-3. READY status work that is removed from theschedule at T-2 will also be assigned an owner for issue resolution using the workweek's IAS Action Request or the condition reporting process as appropriate.For work where IAS holds have not been cleared by T-3, the PS&O Manager canchoose to leave that work on the schedule when the work is critical to plant goals. Inthis situation actions must be assigned in the work week's IAS Action Request to ensuresuccessful completion of the work.[18] T-2 WeekThe work schedule is frozen.The Work Week Manager directs Scheduling to issue the frozen schedule to the WorkManagement team, and each Implementing and Support department.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 27 OF 52The Work Week Manager ensures risk assessment is finalized.PS&O prints work packages in accordance with EN-WM-102.[19] T-1 WeekMaintenance completes, or validates completion of, job preparations.[20] T0 WeekThe implementing and support departments monitor the status of work and identifyissues that need resolution outside of their control. Daily Work Control meetings areheld to: Identify issues and assign responsibility for resolution. Review plant status and emergent work to verify the scheduled risk remainsunchanged. Review significant schedule activities. Present significant or relevant OE and safety issues.The Daily Work Control Meeting is chaired by the Ops Shift Manager, and attended byWork Management Team departmental representatives. Significant schedule activitiesand priorities are communicated to the team at this meeting. Schedule exceptions forthe day are also communicated at this meeting. The agenda for this meeting iscontained in Attachment 9.2 for single unit sites and 9.3 for dual unit sites.Prior to the Daily Work Control Meeting, the Work Week Manager communicates withthe Shift Manager to determine emergent work needs. As appropriate, these needs arecommunicated to the FIN Supervisor for resolution.The Work Week Manager provides oversight for schedule performance and resolvesconflicts. The Work Week Manager realigns resources, as necessary.Emergent work, both new work orders and expansion of scheduled work scope, ismonitored by the Work Week Manager, who adjusts schedule and scope as necessary,and ensures that scheduled risk is evaluated when emergent issues are identified.Operations evaluates and responds to risk changes due to emergent issues andexternal events as they occur.System Outage Coordinators monitor the work progress during their assigned workactivities and report status and any needed emphasis to the Work Management team atthe Daily Work Control meeting. The Work Management team adjusts resources andresolves issues to allow completion of the scheduled and emergent work as planned.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 28 OF 52The implementing departments set work order tasks to WORKING in IAS when work iscommenced, and update IAS as work is finished. Work that does not finish in a givenshift is statused in IAS as to progress made during the shift.[21] T+1 WeekThe Work Week Manager, Maintenance Coordinators, System Outage Coordinators,Operations Work Control representative, and Unit Coordinator provide work preparationand execution input to the work week critique report. The critique report will be issuedafter any changes from the T+1 Work Week Critique meeting have been incorporated.The work week critique should contain the following components: Challenges to Nuclear Safety (Plant Risk changes and Unplanned Tech Specentries). Challenges to approved Risk Mitigation Plans (Step 5.2 [4]). Performance relative to duration of system or major component outages, includingoutages resulting in Tech Spec AOT entry. IAS holds not cleared by T-3 for work on the schedule after T-6. Work items deferred from the schedule after T-15 that have an IAS Plant Effectassignment. Review by the Work Week Manager of the work week's IAS Action Requestassignments for lessons learned. Work week strengths and areas for improvement.For work where a System Outage Coordinator was assigned, the System OutageCoordinator will be assigned an action to perform a written critique through the workweek's IAS Action Request.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 29 OF 52[22] T+1 Work Week Critique MeetingThe Work Week Manager conducts a work week critique meeting with the majorprocess owners. The written work week critique is used as the basis for the critiquemeeting. The attendees of the T+1 meeting should include Superintendent level orabove representatives from the following groups: Operations Engineering Maintenance (all disciplines) Facilities Support/Modifications Representative (if applicable) Materials Planning (supervisor level) On-line Scheduling SuperintendentAll participants are expected to be prepared to address work items from theirdepartment's perspective. The intent of the meeting is continuous improvement of thework management process. Lessons learned should be captured and assigned asaction items to the appropriate department. Items covered in the critique should include:Actions are assigned and tracked using the work week's IAS Action Request.Those departments that are assigned areas for improvement take appropriate actionsand provide a response to the Work Week Manager via IAS Action Tracking.5.5 CRITICAL EVOLUTIONS MEETING (CEM)[1] The Critical Evolutions Meeting may be used to screen maintenance or testing,scheduled and unscheduled, that have the potential to challenge the ability to continuesafe operation of the unit. Supplement 1 is provided as guidance for the selection ofcritical evolutions. Attachment 9.4a is the standard CEM agenda, attachment 9.4b is thestandard meeting format, attachment 9.4c is the presentation format and checklist, andattachment 9.4d is the Operations readiness checklist.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 30 OF 525.6 WORK ADDITION OR DELETION APPROVAL[1] After the T-6 Scope Freeze, Attachment 9.1 (or electronic likeness) is used to obtainapproval to add or delete repetitive tasks and Priority 3 or lower priority work from theschedule. The department desiring to add or delete the work completes Section A,which includes the justification for the change. The requestor's Superintendent reviewsthe information and approves the request. For Priority 3 or lower priority additions afterthe T-2 schedule freeze, the PS&O Manager's approval must be obtained.[2] Approval by the requesting organization for the addition of Priority 2 work after the T-6Scope Freeze is not required; however Attachment 9.1 is used to perform the workschedule impact and the operational impact assessment, and to obtain approval fromthe Work Week Manager.[3] If deletion of Priority 2 work after the T-6 Scope Freeze is necessary, Attachment 9.1 isused to obtain that approval. The department desiring to delete the work completesSection A, which includes the justification for the change. The requestor'sSuperintendent reviews the information and approves the request.[4] Attachment 9.1 is not required for Priority 1 work or emergent work assigned to the FINTeam. The operational impact assessment addressed by Section C of Attachment 9.1is performed by the Operations representative assigned to the FIN Team, or in theirabsence, an Operations Work Control representative by checking all applicable block.[5] The group requesting the addition/deletion obtains the concurrence from each affecteddiscipline required to support the change. Each group provides concurrence bydocumenting their resources in Section B.[6] The Operations Work Control representative (or Shift Manager) reviews section C foroperational impact and support needs. The Work Control representative /Work WeekManager establish any special requirements for the activity such as InfrequentlyPerformed Test or Evolution briefing or enhanced job coverage, based on the results ofthe impact assessment. Contingency requirements should be documented in section C.[7] When the form is used for work deletions section B and C may be left blank.[8] The form is approved in Section D by the Work Control representative (or ShiftManager) and Work Week Manager. The Work Week Manager directs changes to theschedule after approvals are completed. Approved forms are retained by the WorkWeek Manager until the T+1 Work Week Critique Meeting, after which they may bediscarded.[9] After T-2 movement of scheduled work inside the work week could change the riskprofile for a given day. After T-2, if it becomes necessary to move risk significant workinside a work week, Attachment 9.1 will be completed to ensure Risk and OPS impactare assessed.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 31 OF 525.7 ON-LINE WORK MANAGEMENT PROCESS FLOW CHART[1] The flow chart below shows the steps in the On-Line Work Management Process. Thetable following the flow chart contains an explanation of each step of the process.On-Line Work Management Process:
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 32 OF 525.7 [1] cont.
CStandard Schedule SentTo T-10 MeetingAttendees For MeetingPreparationScheduling T-10 WorkManagement MeetingScheduling (Cycle PlannerChair Person
)Preliminary WorkSchedule Posted To WebScheduling DEngineering HoldsRelative To PlanningDetails Cleared By T
-10Engineering EMaterial OrdersCompleted By T
-10PlanningModificationDetailsProvided ToPlanningGeneric TagoutRequirements Identified By T-9PlanningWork Package PlanningComplete by T
-9PlanningCommence Review ForAcceptance By T
-8 OfCorrective & ElectiveCompliance PackagesMaintenance F FOperations Performs TagoutESOMS Assignments By T
-8OperationsComplete IAS OperationsImpact Assessment By T
-7OperationsComplete Review ForAcceptance Of WorkPackages By T
-7Maintenance T-6 Work ManagementMeetingWork Week Manager (Chair Person
)Will IAS Holds Be Cleared By T-3?T-6 MeetingAttendeesYes NoCritical Work That Should Be Left OnSchedule?PS&OManagerYes No GIAS Work Week ActionRequest AssignmentMadeWork WeekManagerIAS Work Week ActionRequest AssignmentsMade As NeededWork WeekManagerIAS Work Week ActionRequest AssignmentsMade As NeededSchedulingFrozen Scope WorkSchedule Posted To WebBy T-5Scheduling On-Line RiskAssessment BeginsWork ManagementTeam H N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 33 OF 525.7 [1] cont.Complete ESOMS TagoutPreparation By T
-3Operations I HBegin TagoutPreparation In ESOMSBy T-5Operations T-2 Work ManagementMeetingWork Week Manager (Chair Person
)All IAS Holds Cleared & Work OrderTask READY
?Work Week ManagerYes NoCritical Work That Should Be Left OnSchedule?PS&O ManagerYes No GIAS Work Week ActionRequest Assignment MadeWork Week ManagerIAS Work Week ActionRequest Assignments Made As Needed Work Week ManagerFrozen Work SchedulePosted To WebBy T-2Scheduling On-Line RiskAssessment CompleteBy T-2Work Week ManagerWrite Condition ReportWork WeekManagerJob PreparationsComplete By T
-1ImplementingDepartmentPrint Work PackageDuring T-2ImplementingDepartmentRemove Work From Schedule And ResheduleScheduling G
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 34 OF 525.7 [1] contMonitor Work SchedulePerformanceWork Week ManagerEvaluate RiskAssociated WithEmergent WorkOperations IRespond To EmergentWork As NeededWork Week ManagerPerform & SupportScheduled Work &Report Issues To WorkWeek ManagerImplementingDepartmentResolve Conflicts &Adjust Resources ToPerform Scheduled &Emergent WorkWork Week ManagerSet Work Order TasksTo FINISHED In IASWhen Work IsCompleteImplementingDepartmentSet Work Order TasksTo WORKING In IASWhen Work IsCommencedImplementingDepartmentWork Not Completed IsProgressed In IAS EachShiftImplementingDepartmentProcess, Move DataDate & Time ScheduleThe Schedule DailyWork Week Manager J J T+1 Work WeekCritique MeetingWork Week Manager (Chair Person
)Provide Input For T
+1Work Week CritiqueMaintenanceCoordinatorsProvide Input For T
+1Work Week CritiqueSchedulingProvide Input For T
+1Work Week CritiqueOperations WorkControl SROProvide Input For T
+1Work Week CritiqueSystem OutageCoordinatorDraft T+1 Work WeekCritiqueWork Week ManagerIAS Work Week ActionRequest AssignmentsMade As NeededWork WeekManagerProvide Oversight ForResolution Of IAS WorkWeek Action RequestAssignmentsWork Week Manager N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 35 OF 526.0 INTERFACES[1] Indus Asset Suite[2] E-SOMS Equipment Clearance/Hold Card System[3] Materials Management system[4] Primavera Scheduling Tool 7.0 RECORDS None8.0 OBLIGATION AND REGULATORY COMMITMENT CROSS REFERENCEDocumentDocument Section NMM Procedure SectionSite Applicability None9.0 ATTACHMENTS9.1 On-Line Emergent Work Addition/Deletion Approval Form9.2 Daily Work Control Meeting Agenda - Single Unit9.3 Daily Work Control Meeting Agenda - Dual Unit9.4a Critical Evolutions Meeting Agenda9.4b Critical Evolutions Meeting Format9.4c Critical Evolutions Meeting Presenters Checklist and Presentation Format9.4d Critical Evolutions Operations Readiness10.0 SUPPLEMENTS1.0 Critical Evolution, Identification and Challenge Meeting N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 36 OF 52 ATTACHMENT9.1 O N-LINE EMERGENT WORK ADDITION/DELETION APPROVAL FORMSheet 1 of 1 S ECTION A-DESCRIPTION
&JUSTIFICATIONWO/Task: __________________TODAY'sDATE: ________CR____-_______Component ID.___________PROPOSED ADD/DELETE DATE:______________WORK DESCRIPTION: _____________________________________________________________________________________________________________________________________________________ ADDITION DELETIONJustification for Emerging and Performing/Deleting Work:____________________________________________________________________________________________________________________________________________Requestor____________________________Requestor's Superintendent__________________________
S ECTION B-WORK SCHEDULE IMPACTLead: Workers:Duration: HrsShop Rep Name:Support: Workers:Duration: HrsShop Rep Name:Support: Workers:Duration: HrsShop Rep Name:Support: Workers:Duration: HrsShop Rep Name:
S ECTION C-OPERATIONAL IMPACT ASSESSMENT Yes No Reactor scram or turbine trip potential Yes No Plant transient potential Yes No ESF Actuation potential Yes No Radioactive release possible Yes No Short-term LCO (<=7-day)
Yes No Environmental release potential Yes No Maintenance Rule Unavailability results Yes No Special Permits Needed (Welding, Confined Space)
Yes No Special Radiological controls needed Yes No Infrequently Performed Tests or Evolutions (IPTE)
Yes No Impact Statement Reviewed/Revised Yes No Reactivity Management Reviews Complete Yes No Work on Energized or Pressurized Equip Yes No Risk Management VerifiedAction(s) taken to minimize impact of YES answers above:
S ECTION D-WORK ADDITION/DELETION REQUIRED APPROVALSWork Control Representative (or Shift Manager) ________________________Work Week Manager _____________________________PS&O Manager (As required per this procedure.)_____________________________
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 37 OF 52 ATTACHMENT9.2 DAILY WORK CONTROL MEETING AGENDA-SINGLE UNITSheet 1 of 1Daily Work Control Meeting Agenda (Chaired By Shift Manager)Date: _____________1) Safety - Safety Representative2) Human Performance (OE, MELT) - As Assigned3) Radiological Safety - RP Representative4) Plant Status Report - Shift ManagerProtected TrainRisk Assessment ColorPower LevelUnidentified RCS Leak RateStation ConcernsEmergent WorkOperations IssuesLCO/AOT's <72 Hrs and Risk ActivitiesControl Room AlarmsSpecial Evolutions / Down Power (next 30 days)5) Significant Schedule Activities/Priorities - Work Week Manager6) Schedule Exceptions - Craft Coordinators:ElectricalI&CMechanicalMaintenance SupportFIN7) Chemistry Performance Index - Chemistry Representative8) Any Additional Input?9) Close the Meeting - Shift Manager N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 38 OF 52 ATTACHMENT9.3 DAILY WORK CONTROL MEETING AGENDA-D UAL UNITSheet 1 of 1Daily Work Control Meeting Agenda(Chaired By Shift Manager)Date: _____________1) Safety - Safety Representative2) Human Performance (OE, MELT) - As Assigned:First Unit3) Radiological Safety - RP Rep.4) Plant Status Report - Shift ManagerProtected TrainRisk Assessment ColorPower LevelUnidentified RCS Leak RateStation ConcernsEmergent WorkOperations IssuesLCO/AOT's <72 Hrs and Risk ActivitiesControl Room AlarmsSpecial Evolutions / Down Power (next 30 days)5) Significant Schedule Activities/Priorities - WorkWeek Manager6) Schedule Exceptions - Craft Coordinators:ElectricalI&CMechanicalMaintenance SupportFIN7) Chem Performance Index - Chem RepSecond Unit8) Radiological Safety - RP Rep9) Plant Status Report - Shift ManagerProtected TrainRisk Assessment ColorPower LevelUnidentified RCS Leak RateStation ConcernsEmergent WorkOperations IssuesLCO/AOT's <72 Hrs and Risk ActivitiesControl Room AlarmsSpecial Evolutions / Down Power (next 30 days)10) Significant Schedule Activities/Priorities - WorkWeek Manager11) Schedule Exceptions - Craft Coordinators:ElectricalI&CMechanicalMaintenance SupportFIN12) Chem Performance Index - Chem Rep13) Any Additional Input?14) Close the Meeting - Shift Manager N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 39 OF 52 ATTACHMENT9.4 ACRITICALEVOLUTIONMEETINGAGENDAT-1 Week (Week of MM/DD/YY)WWM - WWM NameWorkGroup(s)Work OrderNumber(s)Description of ActivityResponsiblePRESENTER(s)Action RequiredT-2 Week (Week of MM/DD/YY)WWM - WWM NameWorkGroup(s)Work OrderNumber(s)Description of ActivityResponsiblePRESENTER(s)Action RequiredT-3 Week (Week of MM/DD/YY)WWM - WWM NameWorkGroup(s)Work OrderNumber(s)Description of ActivityResponsiblePRESENTER(s)Action RequiredT-4 Week (Week of MM/DD/YY)WWM - WWM NameWorkGroup(s)Work OrderNumber(s)Description of ActivityResponsiblePRESENTER(s)Action Required N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 40 OF 52 ATTACHMENT9.4 BCRITICALEVOLUTIONMEETINGFORMATThis checklist is intended as an aid for conducting the CEM. Ensure copies of the CEM Agenda are available. If applicable, discuss activities emerged inside the T-4 week since the last CEM. Briefly discuss CEM proposed agenda items for the T-5 week.Discussion should be limited to that required to approve the addition of the item andassign work group responsibility for assigning a PRESENTER. The CEM Members hear presentations and engage in discussion of agenda items. The CEM Members approve performance of the item, request additional information, ordisapprove performance of the item. Consider an action to brief the site's General Manager on approved items that entailsignificant risk to station operation or personnel.If the Activity is NOT ready to proceed:Minimum generic preparation for consideringactivity Ready WO Package is ReadyEnsure PRESENTER aware of actions neededfor CEM approval WO Package detail deemed adequate Job Walkdown has been conductedAs required, assign additional work groupaction to assist PRESENTER Parts needed are verified on site Support needs identified/arrangedUpdate the CEM Agenda to reflect actionsrequired. Coordination required arrangedIf the activity is disapproved Ensure that theitem is deferred from the schedule. Clearance, if needed, is prepared N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 41 OF 52 ATTACHMENT9.4 CPRESENTERS READINESSCHECKLISTThe following checklist is provided as an aid for the Presenters of activities brought before theCEM... For groups with more than one WO, separate WO may be grouped together. Example:I have two work orders to repair oil leaks on P-1A MFW Pump.
1.PREPARATION: Is the WO package ready to work? Has the job been walked down? If so, are you satisfied with the WO package detail? Does this activity require coordination with other departments? If so, how will thiscoordination be accomplished? Has the Clearance (if needed) been reviewed? If so, are you satisfied with the clearance?
2.WORK DESCRIPTION: Describe what you are going to accomplish. Examples: Implement modification,Calibration, Type of PM, Repair Oil Leaks, etc. On what component will the work be performed? Is the work intrusive? Examples: External inspection, pump will be disassembled, etc.
3.BASIC DESCRIPTION OF HOW WORK WILL BE PERFORMED: Will a system be breeched? What type of work instruction guidance will be used (i.e. - Compliance package,Reference package, skill of the craft)? Are there special considerations: ALARA, Safety, high energy? Is scaffolding, or other special access considerations, needed?
4.POTENTIAL IMPACT OF WORK: Will fuses be pulled or low voltage breakers opened? If so, does the WO packageidentify all components that will lose power? Is there a short circuit potential? What other equipment would be lost? Is there equipment in the area of maintenance that may be impacted? Are there special time considerations? Examples: Work around the clock, work twoshifts, other activities awaiting this work completion, etc.
5.CONTINGENCIES: Explain any preparations needed to ensure equipment can be restored. Verify that adequate technical knowledge exist to perform the defined scope of work,or that vendor services have been arranged. For inspections/PMs on critical components, are backup parts available if needed?Are these backup parts calibrated and ready for use? If problems delay equipment restoration, is the impact acceptable?
6.CONCLUSION: If any other problems are known, say so and discuss needed actions.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 42 OF 52 ATTACHMENT9.4 C CRITICAL EVOLUTIONS MEETING PRESENTATION FORMAT 1.PREPARATION:
2.WORK DESCRIPTION:
3.BASIC DESCRIPTION OF HOW WORK WILL BE PERFORMED:
4.POTENTIAL IMPACT OF WORK:
5.CONTINGENCIES:
6.CONCLUSION:
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 43 OF 52 ATTACHMENT9.4 DOPERATIONSDEPARTMENATREADINESSCHECKLIST ATTACHMENT 9.4d - OPERATIONS DEPARTMENAT READINESS CHECKLISTThe following checklist is provided as an aid for operations providing quick status for activitiesbrought before the CEM.
1.WORK ORDER REVIEW: Is WO Package Detail Sufficient for determining: Impact of maintenance activity on the component? Impact of maintenance activityon the plant? Clearance boundaries required? Is the PMT specific and appropriate? Is the PMT testing specified too broad forthe maintenance performed? Does the WO package sufficiently address performing predictable administrativeconcerns? (i.e., posting of firewatches, opening of doors and hatches, etc.)
2.CLEARANCE PREPARATION: Has a clearance been prepared and previewed for this activity? Are there special concerns with the clearance of which the PRESENTER shouldbe made aware? (i.e., high energy with single isolation, special coordinationrequired, etc.)
3.SAFETY IMPACT OF WORK: Has the appropriate TS/TRM/ODCM requirement been identified? Is other department assistance required in meeting regulatory requirements? Is the affect of maintenance on plant safety (i.e., containment penetration,Category E, insulation removal, boric acid concerns, etc.) understood?
4.CONTINGENCIES: Is other department assistance required in determining effect of activity on plant,or contingency actions needed?
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 44 OF 52 SUPPLEMENT 1CRITICALEVOLUTION,IDENTIFICATION ANDCHALLENGEMEETING1.0 PURPOSEThis Supplement describes the general outline, purpose and conduct for the Critical EvolutionsMeeting.2.0 SCOPEThe Critical Evolutions Meeting may be used to screen maintenance or testing, scheduled andunscheduled, that have the potential to challenge the ability to continue safe operation of theunit. Specific evolutions are selected for review at the discretion of the Manager, Planning,Scheduling and Outages. The objective of this review is to insure that risks are minimized andappropriately managed through preparation and defense in depth.3.0 DEFINITIONS 3.1Critical Evolution (CE) An evolution that has the potential to challenge thecontinued and safe operation. Examples: Work (excluding routine maintenance and surveillance testing) requiringentry into an LCO of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> or less. Trip/Event Initiators activities (excluding routine maintenance andsurveillance testing) Reduced Margin Activities (see definition) Modifications affecting significant plant operating equipment Activities with significant ALARA implications Activities with unusual personnel safety exposures Activities with significant dual unit impact Manager PS&O determines an activity requires CE challenge 3.2CRITICAL EVOLUTION MEETING (CEM): Meeting in which the station staffdemonstrate to station management that appropriate preparation has beenconducted to perform activities that have the ability to challenge continued safeoperation.
3.3PRESENTER: Person or group performing the Critical Evolution thatrepresents the state of preparedness for performing the activity to the CEM.The PRESENTER may be the person who will perform the Critical Evolution,his/her Supervisor, or another departmental representative. In the case ofcomponent or system outages - or other activities that involve multi-craft, multi-component maintenance, the respective Shop Coordinators,System/Component Outage Coordinator may function as the PRESENTER.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 45 OF 52 3.4Reduced Margin Activities: Significant activities involving components that donot meet the definition of a CRITICAL EVOLUTION, but for which the stationhas identified special work contingencies.
3.5TRIP/EVENT INITIATOR: A component that fits either of the following criteria:A component with single redundancy where the loss of both would result in anunpreventable reactor trip, turbine trip, turbine setback or runback (i.e.,Condenser Vacuum Pumps, EH Oil Pumps)
ORA component with no redundancy where its loss would result in anunpreventable reactor trip, turbine trip, turbine setback or runback.4.0 RESPONSIBILITY AND AUTHORITY 4.1Planning and Scheduling (P&S) 4.1.1Planning, Scheduling and Outage (PS&O) Management (CEMChairman) Assigns action items as appropriate to enhance the resolutionof issues that challenge the successful completion of theCritical Evolution Facilitates selection of activities that will be returned fordiscussion in future CEM. Determines the resolution of any issue involving CRITICALEVOLUTIONS that is not specifically addressed in this desk guide.4.1.2On-line Maintenance Scheduling Superintendent or designee Develops, distributes and maintains the CEM Agenda 4.1.3Work Week Managers (WWM) Facilitates discussions of the Work Management Team toidentify activities that should be identified as Critical Evolutions. Forwards information on activities determined to be CriticalEvolutions to the On-line Maintenance SchedulingSuperintendent for inclusion in the CEM Agenda. Attend CEM as required by activities scheduled in theirrespective work weeks.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 46 OF 52 4.2Operations Management Attends as a member of the CEM. Provides the On-line Maintenance Scheduling Superintendent withdesignated PRESENTER for Critical Evolutions assigned to theirdepartment. Assigns Operations resources as needed to assist PRESENTERS indetermining impact of Critical Evolution activities. Prepared to discuss WO preparedness issues, specifically: OperabilityImpacts of maintenance and PMT issues. Prepared to discuss clearance preparation issues. Prepared to discuss control room workload issues.
4.3Systems Engineering Management Attends as a member of the CEM. Provides the On-line Maintenance Scheduling Superintendent withdesignated PRESENTER for Critical Evolutions assigned to theirdepartment. Assigns Engineering resources as needed to assist PRESENTERS indetermining impact of Critical Evolution activities. Prepared to discuss fidelity to design basis issues. Prepared to discuss correct material condition prioritization. Prepared to discuss contingencies and modification closure supportactivities.
4.4Maintenance Management Attends CEM as required ready to discuss Critical Evolutions assigned totheir group. Provides the On-line Maintenance Scheduling Superintendent withdesignated PRESENTER for Critical Evolutions assigned to theirdepartment. Assists PRESENTER in identification of any outstanding issues that maychallenge the successful completion of the activity as scheduled. Assists PRESENTER in discussion of work scope, contingencies, andreadiness issues of Critical Evolutions. Assist PRESENTER in resolving coordination, or other issues that preventthe activity from being performed.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 47 OF 52 4.5Presenter(s) Attends CEM and represents the state of preparedness for performing theCritical Evolution. Attachment 9.4c and 9.4d, CEM Presentation Checklist,is included as an aide in presentation. Communicates need for assistance or other department interface to theirrespective department CEM representative.5.0 Designation of CRITICAL EVOLUTION 5.1An activity will be screened for consideration as a CRITICAL EVOLUTION if itmeets ANY of the following criteria: Work (excluding routine maintenance and surveillance testing) requiringentry into an LCO of 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> or less. Trip/Event Initiators activities (excluding routine maintenance andsurveillance testing) Reduced Margin Activities (see definition) Modifications affecting significant plant operating equipment Activities with significant radiological implications Activities with unusual personnel safety exposures Activities with significant dual unit impact Manager PS&O determines an activity requires CE challenge 5.2CRITICAL EVOLUTIONS should be identified at Work Management Teammeetings prior to the T-5 week.
5.2.1The WWM of the respective week will compile activities identifiedas CRITICAL EVOLUTIONS, and Forward activity information to the On-line MaintenanceScheduling Superintendent for inclusion in the CEM Agenda. Ensure that the respective work order activity obtain CEMapproval prior to implementation.
5.3Activities identified outside of Work Management Team meetings (i.e.,Operations schedule reviews, emergent activities, etc.) should be forwarded tothe On-line Maintenance Scheduling Superintendent for consideration forinclusion in the CEM Agenda.
5.4In the event of conflicting opinions on whether an activity should be treated asa CRITICAL EVOLUTION, Manager PS&O concurrence is required for finalresolution.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 48 OF 526.0 CEM Agenda 6.1Development of the CEM Agenda 6.1.1The On-line Maintenance Scheduling Superintendent is responsiblefor developing and maintaining the CEM Agenda. Attachment 9.4a,Standard CEM Meeting Agenda, is included to maintain a standardformat.6.1.2The initial information entered on the CEM Agenda is used todetermine the responsible work group for assignment ofPRESENTER responsibility, and should consist of: Affected Work Group(s) Associated Work Order(s) Basic Description of Activity 6.2Distribution of the CEM Agenda 6.2.1The On-line Maintenance Scheduling Superintendent distributesthe CEM Agenda to the appropriate persons weekly. The followingpersons will be included in the CEM Agenda distribution as aminimum. Manager, PS&O Work Week Managers Plant General Manager Maintenance Manager and official Designees Operations Manager and official Designees Systems Engineering Manager and official Designees Electrical Superintendent and official Designees Mechanical Superintendent and official Designees Instrument and Controls Superintendent and official Designees RP Manager Human Performance / Industrial Safety Management 6.2.2Other individuals interested in obtaining distribution of the CEMAgenda must make specific arrangements with their respectivedepartment management, or with the On-line MaintenanceScheduling Superintendent.
6.3Maintenance of the CEM Agenda 6.3.1The On-line Maintenance Scheduling Superintendent will updatethe CEM Agenda to reflect the most recent information.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 49 OF 52 6.3.2When the CEM has determined that a particular CRITICALEVOLUTION is ready to proceed, the On-line MaintenanceScheduling Superintendent will remove the respective activity fromthe CEM agenda.7.0 Composition of the CEM 7.1It is desirable to maintain as consistent of a complement of individuals aspossible for the CEM Team. This will allow a more consistent message to besent to individuals preparing for CRITICAL EVOLUTIONS. Thus, specificdepartments should provide the Manager, PS&O with as limited a number ofindividuals as possible to fill the required composition of the CEM. Suggesteddesignees are as follows:
7.1.1Operations Manager: Operations Manager or Assistant OperationsManagers. Other operations individuals require the concurrence ofthe Manager, PS&O.
7.1.2Systems Engineering Manager: Systems Engineering Manager,other System Engineering individuals require the concurrence ofthe Manager, PS&O.
7.1.3Maintenance Manager: Maintenance Manager, other MaintenanceManagement individuals require the concurrence of the Manager, PS&O 7.2The minimum quorum required for any CEM consists of: Manager, PS&O - or designee Operations Manager, or approved designee Systems Engineering Manager, or approved designee Maintenance Manager, or approved designee 7.3It is desirable that Specific Maintenance Department Superintendent(s)associated with the critical evolution, or designee be present. The RP Managerand/or the Industrial Safety Department Manager will be required if ALARA orindustrial safety are primary topics.8.0 CEM Format 8.1A CEM will be held weekly if needed. Special CEM sessions may be held asemergent plant needs require. Attachment 9.4b, CEM Meeting Format, isincluded as an aide in conducting the CEM.
8.2The CEM will begin with a review of the items proposed for the CEM Agendafor the T-5 week and/or Emergent activities that have been emerged into anyweek after the T-4 week since the last CEM.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 50 OF 52 8.2.1The discussion of items proposed for the CEM Agenda for the T-5week (or those emerged into any week after the T-4 week) isintended to be general, short in time and limited to approval ofagenda additions and the need to assign the appropriate workgroup the responsibility of designating a PRESENTER.
8.2.3It is not intended that work groups designate a PRESENTER duringthe CEM. Work groups will designate a PRESENTER, and forwardPRESENTER information to the On-line Maintenance SchedulingSuperintendent for inclusion in future CEM Agendas.
8.3After discussion of the T-5 week is concluded, the CEM will address existingCEM Agenda items.
8.4After discussion of each item, CEM members will determine whether or not theactivity is ready to proceed.
8.4.1If activity is determined to be ready to proceed, the item is removedfrom CEM Agenda, and activity will be performed as scheduled.
8.4.2If activity is determined to be NOT ready to proceed, the CEMChairman will ensure the following are performed as applicable. The activity is maintained on the CEM Agenda, the CEM Agendais updated to reflect the current status, and additional actionsrequired are communicated to PRESENTER. Additional actions are assigned to supporting departments, asneeded, to assist the PRESENTER in resolving deficiencies OR The activity is deferred from the schedule and removed from the agenda.8.5As a minimum, the following generic preparations will be completed prior toallowing a CRITICAL EVOLUTION to proceed. More detailed questions for jobstatus are contained in Attachment 9.4c, PRESENTER READINESSCHECKLIST. WO package is in Ready status WO package detail are adequate for successful performance Job walkdown has been conducted Parts needed are verified available and on site Support needs identified/arranged Coordination required arranged Clearance, if needed, is prepared N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 51 OF 52 8.6Operations should be prepared to input status pertaining to the informationcontained in Attachment 9.4d, Operations Readiness Checklist.
8.6.1Inclusion of an item on this checklist does not imply that Operationsis responsible for resolving the issue.
8.6.1Operations should bring deficient items before the CEM. The CEMcan help in assigning an action to the appropriate work group inresolving the issue.9.0 Expectations for PRESENTERS 9.1PRESENTERS will be required to represent a particular work activity before theCEM. The PRESENTER is considered the individual lead for the activityrepresented, and should be able to provide accurate status of the preparationsbeing made for the activity, and the difficulties encountered.
9.2The CEM is not a planning meeting. The PRESENTER is expected to preparefor the maintenance activity and present the plan to the CEM.
9.3System/Component outages present coordination and return to service issuesthat are more complicated than individual jobs. For system and componentoutages, Shop Coordinators will assist the System/Component OutageCoordinator in preparing for the role of PRESENTER. In the absence of anassigned System/Component Outage Coordinator, Shop Coordinators will beexpected to work together to present the state of readiness of thesystem/component outage.
9.4PRESENTERS should structure their presentation to the CEM in the formatidentified in Attachment 9.4c, CEM Presentation Format. This will helpstreamline the CEM meeting, and ensure that the maximum amount of benefitis obtained from the CEM. Page 1 of this attachment provides explanation ofthe information desired. Page 2 of this attachment is provided for use by thePRESENTER.
N ON-QUALITY RELATEDEN-WM-101REV. 3NUCLEARMANAGEMENT MANUAL INFORMATIONAL U SEPAGE 52 OF 52 9.5PRESENTERS are not expected to be capable of individually solving allproblems or answering all questions associated with an assigned activity. If aPRESENTER encounters difficulty in preparing for the CEM, the PRESENTER should: Inform their department supervision/management of nature of assistanceneeded. Responsible department supervision/management should takeaction to arrange needed help for PRESENTER. If this is not successful, PRESENTER should present difficulty encounteredin obtaining assistance to the CEM members, and request otherdepartment assistance be assigned to the PRESENTER.