05000321/FIN-2009003-02
From kanterella
Revision as of 11:37, 30 May 2018 by StriderTol (talk | contribs) (Created page by program invented by StriderTol)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Finding | |
---|---|
Title | Licensee-Identified Violation |
Description | A licensee-identified violation for Unit 2 of TS 3.4.3 which states 10 of 11 SRVs shall be operable during Modes 1, 2 and 3. Contrary to this, on March 12, 2009, it was identified during bench testing that five safety relief valves failed to lift at the required technical specification (TS) setpoint. The cause was found to be corrosion induced bonding between the pilot disc and seating surface. This condition was documented in CR 2009102787. This finding is of very low safety significance because a previous evaluation performed by the licensee bounds this condition and RCS pressure would be maintained below the TS safety limit. LER 05000366/2009-001Safety Relief Valves Allowable Test Range Exceeded Due to Setpoint Drift is closed |
Site: | Hatch ![]() |
---|---|
Report | IR 05000321/2009003 Section 4OA7 |
Date counted | Jun 30, 2009 (2009Q2) |
Type: | NCV: Green |
cornerstone | Mitigating Systems |
Identified by: | Licensee-identified |
Inspection Procedure: | |
Inspectors (proximate) | R Bernhard S Shaeffer J Hickey P Niebaum |
INPO aspect | |
' | |
Finding - Hatch - IR 05000321/2009003 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Finding List (Hatch) @ 2009Q2
Self-Identified List (Hatch)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||