ML18151A371: Difference between revisions

From kanterella
Jump to navigation Jump to search
← Older edit
VisualWikitext
Created page by program invented by StriderTol
StriderTol Bot change
 
(2 intermediate revisions by the same user not shown)
Line 2: Line 2:
| number = ML18151A371
| number = ML18151A371
| issue date = 03/19/1992
| issue date = 03/19/1992
| title = Rev 3 to Surry Power Station,Unit 2 Inservice Testing Program Plan for Pumps & Valves,Second Insp Interval 821222-921222.
| title = Rev 3 to Surry Power Station,Unit 2 Inservice Testing Program Plan for Pumps & Valves,Second Insp Interval 821222-921222
| author name =  
| author name =  
| author affiliation = VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.)
| author affiliation = VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:VIRGINIA ELECTRIC AND POWER COMPANY SURRY POWER STATION UNIT 2 INSERVICE TESTING PROGRAM PLAN FOR PUMPS AND VALVES SECOND INSPECTION INTERVAL MAY 1, 1983 - MAY 1, 1993 REVISION 3 ADDRESSES:
{{#Wiki_filter:**
**                        VIRGINIA ELECTRIC AND POWER COMPANY P. 0. BOX 26666 RICHMOND, VIRGINIA 23261 SURRY POWER STATION P. 0. BOX 315 SURRY, VIRGINIA 23883
VIRGINIA ELECTRIC AND POWER COMPANY SURRY POWER STATION UNIT 2 INSERVICE TESTING PROGRAM PLAN FOR PUMPS AND VALVES SECOND INSPECTION INTERVAL MAY 1, 1983 -
** S2PV-iR3                                             Rev. 3 March 19, 1992 9208040072 9207.24- -------- -,
MAY 1, 1993 REVISION 3 ADDRESSES:
: l. ~DR   ADOCK 050002SO
VIRGINIA ELECTRIC AND POWER COMPANY P. 0. BOX 26666 RICHMOND, VIRGINIA 23261 SURRY POWER STATION P. 0. BOX 315 SURRY, VIRGINIA 23883 S2PV-iR3 Rev. 3
      'l.lli         . PDR
: l.
* TABLE OF CONTENTS INSERVICE TESTING PROGRAM PLAN FOR PUMPS AND VALVES i.O  INTRODUCTION 2.0  PROGRAM DESCRIPTION 3.0  PUMP INSERVICE TEST PROGRAM DESCRIPTION 3.1    Program Development Philosophy
9208040072 9207.24- -------- -,  
: 3. 2 . Program Implementation 3.3    Program Administration 3.4    Pump Reference List 3.5    Pump Inservice Test Tables 3.6    Pump Test Program Relief Request 3.7    Alternative Testing for Non-Code Pumps 4.0  VALVE INSERVICE TEST PROGRAM DESCRIPTION
~DR ADOCK 050002SO  
**      4.1 4.2 4.3 4.4 4.5 4.6 Program Development Philosophy Program Implementation Program Administration Valve Inservice Test Table Valve Test Pr*ogram Relief Request Valve Test Program Cold Shutdown Justification 4.7    Alternative Testing for Non-Code Valves 5.0  REPORTING OF INSERVICE TEST RESULTS 5.1    Pump Inservice Program 5.2    Valve Inservice Program 6.0  QUALITY ASSURANCE PROGRAM
'l.lli PDR March 19, 1992  
* S2PV-1R3 ii Rev. 3 March 19, 1992
* INSERVICE TESTING PROGRAM FOR PUMPS AND VALVES


==1.0 INTRODUCTION==
TABLE OF CONTENTS INSERVICE TESTING PROGRAM PLAN FOR PUMPS AND VALVES i.O INTRODUCTION 2.0 PROGRAM DESCRIPTION 3.0 PUMP INSERVICE TEST PROGRAM DESCRIPTION 3.1
: 3. 2.
3.3 3.4 3.5 3.6 3.7 Program Development Philosophy Program Implementation Program Administration Pump Reference List Pump Inservice Test Tables Pump Test Program Relief Request Alternative Testing for Non-Code Pumps 4.0 VALVE INSERVICE TEST PROGRAM DESCRIPTION Program Development Philosophy Program Implementation Program Administration Valve Inservice Test Table Valve Test Pr*ogram Relief Request 4.1 4.2 4.3 4.4 4.5 4.6 4.7 Valve Test Program Cold Shutdown Justification Alternative Testing for Non-Code Valves 5.0 REPORTING OF INSERVICE TEST RESULTS 5.1 Pump Inservice Program 5.2 Valve Inservice Program 6.0 QUALITY ASSURANCE PROGRAM ii S2PV-1R3 Rev. 3 March 19, 1992


This Pump and Valve Inservice Test Program Plan is applicable to the Surry Power Station Unit 2 which began commercial operation on May 1, 1973. This program plan is comprised of two independent subprograms - the Pump Inservice Test Program and the Valve Inservice Test Program.
INSERVICE TESTING PROGRAM FOR PUMPS AND VALVES
 
==1.0 INTRODUCTION==
This Pump and Valve Inservice Test Program Plan is applicable to the Surry Power Station Unit 2 which began commercial operation on May 1, 1973.
This program plan is comprised of two independent subprograms - the Pump Inservice Test Program and the Valve Inservice Test Program.
The development, implementation and administration of these two programs are detailed in subsequent sections.
The development, implementation and administration of these two programs are detailed in subsequent sections.
Surry Power Station received a Safety Evaluation Report (SER) for the IST Program in August of 1990. Certain program anomalies were identified in the SER. *Surry Power Station submitted updates to Revision 2 of the IST Program on November 28 and 30, 1990 in part to correct these anomalies. The updates are included in this program revision .
Surry Power Station received a Safety Evaluation Report (SER) for the IST Program in August of 1990.
*
Certain program anomalies were identified in the SER. *Surry Power Station submitted updates to Revision 2 of the IST Program on November 28 and 30, 1990 in part to correct these anomalies.
* S2PV-1R3.,
The updates are included in this program revision.
1-1 Rev. 3 March 19, 1992
1-1 S2PV-1R3 Rev. 3 March 19, 1992  
* 2.0 PROGRAM DESCRIPTION This Inservice Testing Program for ISI Class 1, 2, 3 and NC pumps and valves meets the requirements of Subsections IWP and IWV of Section XI of the ASME Boiler and Pressure Vessel Code, 1980 Edition through the Winter 1980 Addendum. Where these requirements are determined to be impractical, specific requests for relief have been written and included in the program plan attached *
 
*
2.0 PROGRAM DESCRIPTION This Inservice Testing Program for ISI Class 1, 2, 3 and NC pumps and valves meets the requirements of Subsections IWP and IWV of Section XI of the ASME Boiler and Pressure Vessel Code, 1980 Edition through the Winter 1980 Addendum.
* S2PV-1R3 2-1 Rev. 3 March 19, 1992
Where these requirements are determined to be impractical, specific requests for relief have been written and included in the program plan attached
* 3.0 PUMP INSERVICE TEST PROGRAM DESCRIPTION 3.1   PROGRAM DEVELOPMENT PHILOSOPHY Highly reliable safety-grade equipment is a vital consideration in the operation of a nuclear generating station. To help assure operability, the ,surry Power Station Unit 2 Pump Inservice Test Program has been developed.
* 2-1 S2PV-1R3 Rev. 3 March 19, 1992  
The Program is designed to detect and evaluate significant hydraulic or mechanical changes in the operating parameters of vital pumps and to initiate corrective action when necessary. The Program is based on the requirements of the ASME Boiler and Pressure Vessel Code (B&PV), Section XI, Subsection IWP. To the maximum extent practical, the Program complies with the specifications of ASME B&PV Code, Section XI, Subsection IWP, 1980 Edition with Addendum through Winter .of 1980; 10CFR50.55a(g); and NRC Staff guidelines for complying with certain provisions of 10CFR50.55a(g) "Inservice Inspection Requirements."
 
The Nuclear Regulatory Commission and Code Committee recognized that design differences among plants may
3.0 PUMP INSERVICE TEST PROGRAM DESCRIPTION 3.1 PROGRAM DEVELOPMENT PHILOSOPHY 3.2 S2PV-1R3 Highly reliable safety-grade equipment is a vital consideration in the operation of a nuclear generating station.
* render impractical certain Code requirements. Where such impracticalities exist, they have been substantiated as exceptions as allowed by the Code .
To help assure operability, the,surry Power Station Unit 2 Pump Inservice Test Program has been developed.
            .Alternate testing requirements have been proposed when warranted.
The Program is designed to detect and evaluate significant hydraulic or mechanical changes in the operating parameters of vital pumps and to initiate corrective action when necessary.
3.2  PROGRAM IMPLEMENTATION Surveillance testing is performed to detect equipment malfunction or degradation and to initiate corrective action. Since the safeguards pumps are normally in standby mode, periodic testing of this equipment is especially important. The Surry Power Station Unit*2 Inservice Test Program provides a schedule for testing safety-grade pumps and will be implemented as part of normal periodic surveillance testing.
The Program is based on the requirements of the ASME Boiler and Pressure Vessel Code (B&PV), Section XI, Subsection IWP.
R~ference data will be gathered during initial surveillance tests. In most cases, test parameters
To the maximum extent practical, the Program complies with the specifications of ASME B&PV Code, Section XI, Subsection IWP, 1980 Edition with Addendum through Winter.of 1980; 10CFR50.55a(g); and NRC Staff guidelines for complying with certain provisions of 10CFR50.55a(g) "Inservice Inspection Requirements."
The Nuclear Regulatory Commission and Code Committee recognized that design differences among plants may render impractical certain Code requirements.
Where such impracticalities exist, they have been substantiated as exceptions as allowed by the Code.  
. Alternate testing requirements have been proposed when warranted.
PROGRAM IMPLEMENTATION Surveillance testing is performed to detect equipment malfunction or degradation and to initiate corrective action.
Since the safeguards pumps are normally in standby mode, periodic testing of this equipment is especially important.
The Surry Power Station Unit*2 Inservice Test Program provides a schedule for testing safety-grade pumps and will be implemented as part of normal periodic surveillance testing.
R~ference data will be gathered during initial surveillance tests.
In most cases, test parameters
_will be measured with normal plant instrumentation.
_will be measured with normal plant instrumentation.
This approach will simplify the.test program and will promote timely completion of periodic surveillance testing. When permanently installed instrumentation is not available, portable instrumentation will be used to record the required parameters .
This approach will simplify the.test program and will promote timely completion of periodic surveillance testing.
* S2PV-1R3 3-1 Rev. 3 March 19, 1992
When permanently installed instrumentation is not available, portable instrumentation will be used to record the required parameters.
* During subsequent surveillance tests, flow rate will normally be selected as the independent test parameter and will be set up* to match the reference flow rate.
3-1 Rev. 3 March 19, 1992  
Other hydraulic and mechanical performance parameters will be measured and evaluated against the appropriate reference values. The resuits of such evaluations will determine whether or not corrective action is warranted.
 
Each pµmp in the Pump Inservice Test Program will be tested according to a detailed test procedure. The procedure* will include, as minimum: .
S2PV-1R3 During subsequent surveillance tests, flow rate will normally be selected as the independent test parameter and will be set up* to match the reference flow rate.
: 1)
Other hydraulic and mechanical performance parameters will be measured and evaluated against the appropriate reference values.
The resuits of such evaluations will determine whether or not corrective action is warranted.
Each pµmp in the Pump Inservice Test Program will be tested according to a detailed test procedure.
The procedure* will include, as minimum:.
: 1)  


==References:==
==References:==
This section will identify references applicable to Technical Specifications and other necessary material as drawings.
This section will identify references applicable to Technical Specifications and other necessary material as drawings.
: 2) Purpos*e: This section will identify test objectives.
: 2)
: 3) Initial Conditions: Each procedure should identify those independent actions or procedures which shall be completed and station conditions which shall exist prior to use.
Purpos*e:
*
This section will identify test objectives.
: 4) Precautions: Precautions should be established to alert the individual performing the task to those situations in which important measures should be taken early or where extreme care should be used to protect equipment and personnel. Cautionary notes applicable to specific steps in the procedure should be included in the main body of the procedure as appropriate and should be identified as such.
: 3)
: 5) Instructions: The main body*of a procedure should contain step by step instructions in the degree of detail necessary for performing a required test.
Initial Conditions:
: 6) Acceptance Criteria:* The ranges within which test data will be considered acceptable will be established and included in the test procedure. In the event that data fall outside the acceptable range, operator action will be governed by approved station procedures~
Each procedure should identify those independent actions or procedures which shall be completed and station conditions which shall exist prior to use.
: 4)
Precautions:
Precautions should be established to alert the individual performing the task to those situations in which important measures should be taken early or where extreme care should be used to protect equipment and personnel.
Cautionary notes applicable to specific steps in the procedure should be included in the main body of the procedure as appropriate and should be identified as such.
: 5)
Instructions:
The main body*of a procedure should contain step by step instructions in the degree of detail necessary for performing a required test.
: 6)
Acceptance Criteria:* The ranges within which test data will be considered acceptable will be established and included in the test procedure.
In the event that data fall outside the acceptable range, operator action will be governed by approved station procedures~
Finally, it is recognized that the Pump Inservice Test Program sets forth minimum testing requirements.
Finally, it is recognized that the Pump Inservice Test Program sets forth minimum testing requirements.
Additional testing will be performed, as required, after pump maintenance or as determined necessary by
Additional testing will be performed, as required, after pump maintenance or as determined necessary by personnel at Surry Power Station.
** S2PV-1R3 personnel at Surry Power Station .
3-2 Rev. 3 March 19, 1992  
3-2 Rev. 3 March 19, 1992
 
* 3.3 PROGRAM ADMINISTRATION The operations and engineering staffs at Surry Power station are responsible for administration and execution of the Pump Inservice Test Program. The Program was officially implemented on May 1, 1983 and will govern pump testing for a 120 month period. Prior to the end of the 120 month period, the Program will be r~viewed and upgraded to assure continued compliance with 10CFR50.55a(g) (4). The Program will be updated a minimum*of at least once every 40 ~onths for new*
3.3 PROGRAM ADMINISTRATION The operations and engineering staffs at Surry Power station are responsible for administration and execution of the Pump Inservice Test Program.
The Program was officially implemented on May 1, 1983 and will govern pump testing for a 120 month period.
Prior to the end of the 120 month period, the Program will be r~viewed and upgraded to assure continued compliance with 10CFR50.55a(g) (4).
The Program will be updated a minimum*of at least once every 40 ~onths for new*
systems, relief request, etc.
systems, relief request, etc.
3.4 PUMP REFERENCE LIST This list gives a brief description of*each pump identified in the. Pump Inservice Test Program. The pump's ASME Code Classifications are specified in "PUMP INSERVICE TEST TABLES".
3.4 PUMP REFERENCE LIST S2PV-1R3 This list gives a brief description of*each pump identified in the. Pump Inservice Test Program.
2-CH-P-lA 2-CH-P-1B 2-CH-P-1C High Head Safety Injection or Charging Pumps provide
The pump's ASME Code Classifications are specified in "PUMP INSERVICE TEST TABLES".
* high pressure flow for the Safety Injection System and during normal operation, maintain pressurizer level and seal water injection to the Reactor Coolant Pumps. See drawing 11548-CBM-SSB, Sheet 2.
2-CH-P-lA 2-CH-P-1B 2-CH-P-1C High Head Safety Injection or Charging Pumps provide high pressure flow for the Safety Injection System and during normal operation, maintain pressurizer level and seal water injection to the Reactor Coolant Pumps.
2-SI-P-lA 2-SI-P-lB Low Head Safety Injection Pumps provides low pressure safety injection to the core for long term cooling and as a backup to accumulators. See drawing 11548-CBM-89A, Sheet 1.
See drawing 11548-CBM-SSB, Sheet 2.
2-CS-P-lA 2-CS-P-lB Containment Spray Pumps provide a cooled, chemically treated, borated spray to reduce containment pressure following a loss of coolant accident. See drawing 11548-CBM-84A, Sheet 2 *
2-SI-P-lA 2-SI-P-lB Low Head Safety Injection Pumps provides low pressure safety injection to the core for long term cooling and as a backup to accumulators.
* S2PV-1R3 3-3 Rev. 3 March 19, 1992
See drawing 11548-CBM-89A, Sheet 1.
* 2-RS-P-2A 2-RS-P-2B Outside Recirculation Spray Pumps aid the Containment Spray System in reducing containment pressure rapidly following a loss of coolant accident. See drawing 11548-CBM-84B, Sheet 2.
2-CS-P-lA 2-CS-P-lB Containment Spray Pumps provide a cooled, chemically treated, borated spray to reduce containment pressure following a loss of coolant accident.
2-RS-P-1A 2-RS-P-1B Inside Recirculation Spray Pumps aid the containment spray system in reducing containment pressure rapidly following a loss of coolant accident. See drawing 11548-CBM-84B, Sheet 1.
See drawing 11548-CBM-84A, Sheet 2
2-FW-P-3A 2-FW-P-3B 2-FW-P-2 Auxiliary Feedwater Pumps supply the steam generator with feedwater in the event of a complete loss of n_ormal feedwater. See drawing 11548-CBM-GBA, Sheet 3.
* 3-3 Rev. 3 March 19, 1992  
2-RH-P-1A
 
* 2-RH-P-1B The function of Residual Heat Removal Pumps is to remove heat energy from the core when the Reactor Coolant System is below 3so°F. See drawing 11548-CBM-87A, Sheet 1.
S2PV-1R3 2-RS-P-2A 2-RS-P-2B Outside Recirculation Spray Pumps aid the Containment Spray System in reducing containment pressure rapidly following a loss of coolant accident.
See drawing 11548-CBM-84B, Sheet 2.
2-RS-P-1A 2-RS-P-1B Inside Recirculation Spray Pumps aid the containment spray system in reducing containment pressure rapidly following a loss of coolant accident.
See drawing 11548-CBM-84B, Sheet 1.
2-FW-P-3A 2-FW-P-3B 2-FW-P-2 Auxiliary Feedwater Pumps supply the steam generator with feedwater in the event of a complete loss of n_ormal feedwater.
See drawing 11548-CBM-GBA, Sheet 3.
2-RH-P-1A 2-RH-P-1B The function of Residual Heat Removal Pumps is to remove heat energy from the core when the Reactor Coolant System is below 3so°F.
See drawing 11548-CBM-87A, Sheet 1.
1-CC-P-lC 1-CC-P-lD Component Cooling Water Pumps are used to supply water to remove heat from the Residual Heat Removal System.
1-CC-P-lC 1-CC-P-lD Component Cooling Water Pumps are used to supply water to remove heat from the Residual Heat Removal System.
See drawing 11448~CBM-72D, Sheet 1.
See drawing 11448~CBM-72D, Sheet 1.
1-CH-P-2C 1-CH-P-2D Boric Acid Transfer Pumps supply boric acid to suction of charging pumps via normal coolant boron concentration and emergency makeup. See drawing 11448-CBM-BSA, Sheet 1 .
1-CH-P-2C 1-CH-P-2D Boric Acid Transfer Pumps supply boric acid to suction of charging pumps via normal coolant boron concentration and emergency makeup.
* S2PV-1R3 3-4 Rev. 3 March 19, 1992
See drawing 11448-CBM-BSA, Sheet 1.
* 2-CC-P-2A 2-CC-P-2B Charging Pump Cooling Water Pumps provide water to transfer heat from the charging pump mechanical seals.
3-4 Rev. 3 March 19, 1992  
 
S2PV-1R3 2-CC-P-2A 2-CC-P-2B Charging Pump Cooling Water Pumps provide water to transfer heat from the charging pump mechanical seals.
See drawing 11548-CBM-71B, Sheet 2.
See drawing 11548-CBM-71B, Sheet 2.
2-SW-P-10A 2-SW-P-10B Charging Pump Service Water Pumps provide cooling water for Charging Pump Cooling Water Systems. See drawing 11548-CBM-71B, Sheet 1.
2-SW-P-10A 2-SW-P-10B Charging Pump Service Water Pumps provide cooling water for Charging Pump Cooling Water Systems.
1-EE-P-1B 1-EE-P-lC 1-EE-P-1E Fuel Oil Pumps supply fuel oil to emergency diesel generators wall mounted tank. See drawing 11448-CBB-JSA, Sheet 2 *
See drawing 11548-CBM-71B, Sheet 1.
*
1-EE-P-1B 1-EE-P-lC 1-EE-P-1E Fuel Oil Pumps supply fuel oil to emergency diesel generators wall mounted tank.
* S2PV-1R3 3-5 Rev. ~3 March 19, 1992
See drawing 11448-CBB-JSA, Sheet 2
* 3.5 PUMP INSERVICE TEST TABLES This tabulation identifies the pumps to be tested, code classes, required test quantities and frequencies.
* 3-5 Rev. ~3 March 19, 1992  
Relief from test requirements is reguested in cases where test requirements have been determined to be impractical. Where relief is requested, technical justification is provided along with alternative test methods when applicable.
 
3.5 PUMP INSERVICE TEST TABLES S2PV-1R3 This tabulation identifies the pumps to be tested, code classes, required test quantities and frequencies.
Relief from test requirements is reguested in cases where test requirements have been determined to be impractical.
Where relief is requested, technical justification is provided along with alternative test methods when applicable.
For non-Code pumps, a request for relief is not necessary when provisions of the Code cannot be met.
For non-Code pumps, a request for relief is not necessary when provisions of the Code cannot be met.
Section 3.7 contains a discussion of the testing requirements for non-Code pumps and descriptions of alternative testing in cases where the provisions of the Code cannot be met.
Section 3.7 contains a discussion of the testing requirements for non-Code pumps and descriptions of alternative testing in cases where the provisions of the Code cannot be met.
To aid the reader in interpreting the Pump Inservice Test Table, brief explanations of the table headings and abbreviations are provided below.
To aid the reader in interpreting the Pump Inservice Test Table, brief explanations of the table headings and abbreviations are provided below.
: 1) Pump Number - Each pump in the plant has a unique "tag" number which identifies the system to which the pump belongs.
: 1)
*
Pump Number - Each pump in the plant has a unique "tag" number which identifies the system to which the pump belongs.
: 2) Code Class - ASME Code Class of each pump as per 10CFR50.55a and Regulatory Guide 1.26.
: 2)
Note: NC is for non-Code pumps. These pumps are important to safety but are not in systems that are classified ASME Class 1, 2 or 3.
Code Class -
          '3) System Resist - Either FIX for a test loop with a fixed system resistance or VAR for a test loop with a system resistance that can be varied.
ASME Code Class of each pump as per 10CFR50.55a and Regulatory Guide 1.26.
: 4) The required Section XI test quantities of Inlet Pressure, Differential Pressure (Discharge Pressure is not a required test quantity but is listed for clarity), Flow Rate, Vibration, Bearing Temperature, Pump Speed and.Lubrication Level/Pressure are given as column headings. The following abbreviations are used to describe the test status:
Note:
Q - the test will be performed on a quarterly basis CSD - the test will be performed every cold shutdown. A relief request explains the need for*
NC is for non-Code pumps.
deviating from Section XI test frequency
These pumps are important to safety but are not in systems that are classified ASME Class 1, 2 or 3.  
* requirements 3-6 S2PV-1R3                                            Rev. 3 March 19, 1992
'3)
* NA - the test is not applicable, see corresponding relief request RR - the test will be performed every reactor refueling. A relief request explains the need for deviating from Section XI test frequency requirements.
System Resist - Either FIX for a test loop with a fixed system resistance or VAR for a test loop with a system resistance that can be varied.
* 2Y - the test will be performed every 24 months Under pump speed, NA applies to constant speed pumps which do not require the measurement of speed. Therefore, no relief is necessary.
: 4)
Under Lubrication Level/Pressure, NA applies to pumps that have a lubrication system with no level or pressure indication. No relief is necessary .
The required Section XI test quantities of Inlet Pressure, Differential Pressure (Discharge Pressure is not a required test quantity but is listed for clarity), Flow Rate, Vibration, Bearing Temperature, Pump Speed and.Lubrication Level/Pressure are given as column headings.
*
The following abbreviations are used to describe the test status:
* S2PV-1R3 3-7 Rev. 3 March 19, 1992
Q - the test will be performed on a quarterly basis CSD - the test will be performed every cold shutdown.
A relief request explains the need for*
deviating from Section XI test frequency requirements 3-6 Rev. 3 March 19, 1992  
 
S2PV-1R3 NA - the test is not applicable, see corresponding relief request RR - the test will be performed every reactor refueling.
A relief request explains the need for deviating from Section XI test frequency requirements.
* 2Y - the test will be performed every 24 months Under pump speed, NA applies to constant speed pumps which do not require the measurement of speed.
Therefore, no relief is necessary.
Under Lubrication Level/Pressure, NA applies to pumps that have a lubrication system with no level or pressure indication.
No relief is necessary.
3-7 Rev. 3 March 19, 1992
 
PUMP IN SERVICE TEST TABLE Pump ASME System Inlet Disch Diff Flow Bearing Pump Lubrication Relief
!dent.
Class Resist Press Press Press Rate Vibration Temperature Speed Level/Pressure Request 2-CH-P-lA 2
VAR 0
0 0
0 0
NA NA 0
1 2-CH-P-*lB 2
VAR 0
0 0
0 0
NA NA 0
1 2-CH-P-lC 2
VAR 0
0 0
0 0
NA NA 0
1 2-SI-P-lA 2
FIX 0
0 0
0 0
NA NA NA 1
2-SI-P-*lB 2
FIX 0
0 0
0 0
NA NA NA 1
2-CS-P-lA 2
FIX 0
Q Q
0 0
NA NA Q
1 2-CS-P-lB 2
FIX 0
0 0
0 0
NA NA 0
1 2-RS-P-2A 2
FIX 2Y 2Y 2Y 2Y 2Y NA
. NA NA 1,4 2-RS-P-2B 2
FIX 2Y 2Y 2Y 2Y 2Y NA NA NA 1,4 2-RS-P-lA 2
VAR RR RR RR RR RR NA NA NA 1,5,15 2-RS-P-lB 2
VAR RR RR RR RR RR NA NA NA 1, 5, 15 2-FW-P-JA 3
VAR 0
0 0
0 0
NA NA 0
1 2-FW-P-JB 3
VAR 0
0 0
0 0
NA NA 0
1 2-FW-P-2 3
VAR 0
0 0
0 0
NA 0
'Q 1
2-RH-P-lA 2
VAR CSD CSD CSD CSD CSD NA NA NA 1.7,15 2-RH-P-lB 2
VAR CSD CSD CSD CSD CSD NA NA NA 1.7,15 1-CC-P-lC 3
VAR 0
0 0
0 0
NA NA 0
1.16 1-CC-P-lD 3
VAR 0
0 0
0 0
NA.
NA 0
1.16 3-8 S2PV-2R3 Rev. 3 May 18, 1992  


Pump
PUMP INSERVICE TEST TABLE Pump ASME System Inlet Disch Diff Flow Bearing Pump Lubrication Relief
!dent.
!dent.
          *ASME System Class Resist Inlet Disch Press Press Diff Press
Class Resist Press Press Press Rate Vibration Temperature Speed Level/Pressure Request 1-CH-P-2C 2
* PUMP IN SERVICE TEST TABLE Flow            Bearing    Pump Rate Vibration Temperature Speed Lubrication
VAR Q
* Relief Level/Pressure Request 2-CH-P-lA    2     VAR     0    0    0        0    0        NA         NA         0          1 2-CH-P-*lB  2     VAR     0    0    0        0    0        NA         NA         0          1 2-CH-P-lC    2    VAR     0    0    0        0    0        NA         NA         0          1 2-SI-P-lA    2    FIX    0    0    0        0    0        NA         NA       NA           1 2-SI-P-*lB  2    FIX    0     0     0         0    0        NA         NA       NA           1 2-CS-P-lA    2    FIX    0     Q     Q         0     0        NA         NA         Q          1 2-CS-P-lB   2    FIX     0    0    0        0    0        NA         NA         0         1 2-RS-P-2A    2    FIX    2Y    2Y    2Y        2Y    2Y        NA       . NA       NA           1,4 2-RS-P-2B    2    FIX   2Y    2Y    2Y        2Y    2Y        NA         NA       NA           1,4 2-RS-P-lA    2    VAR    RR    RR    RR        RR    RR        NA         NA       NA          1,5,15 2-RS-P-lB    2    VAR    RR    RR    RR        RR    RR        NA        NA      NA          1, 5, 15 2-FW-P-JA    3    VAR    0    0    0        0    0        NA        NA        0          1 2-FW-P-JB    3    VAR    0    0    0        0    0        NA         NA         0         1 2-FW-P-2    3    VAR    0    0    0        0    0        NA          0        'Q         1 2-RH-P-lA    2    VAR    CSD  CSD  CSD      CSD  CSD        NA         NA       NA         1.7,15 2-RH-P-lB    2    VAR    CSD  CSD  CSD      CSD  CSD        NA        NA      NA          1.7,15 1-CC-P-lC    3    VAR    0    0    0        0    0        NA        NA        0            1.16 1-CC-P-lD    3     VAR    0    0    0        0    0        NA.       NA        0            1.16 3-8 S2PV-2R3                                                                           Rev. 3 May 18, 1992
Q Q
Q Q
NA NA NA 1.18 1-CH-P-2D 2
VAR Q
Q Q
Q Q
NA NA NA 1.18 2-CC-P-2A 3
VAR Q
Q Q
Q Q
NA NA NA 1
2-CC-P-2B 3
VAR Q
Q Q
Q Q
NA NA NA 1
2-SW-P-lOA 3
VAR Q
Q 0
0 0
NA NA NA 1
2-SW-P-lOB 3
VAR Q
0 Q
Q 0
NA NA NA 1
1-EE-P-lB NC FIX NA Q
NA 0
Q NA NA NA 1,PNC-1 1-EE-P-lC NC FIX NA 0
NA Q
0 NA NA NA 1,PNC-1 1-EE-P-lE NC FIX NA Q
NA 0
Q NA NA NA 1,PNC-1 Note:
PNC-1 is not a request for relief but a description of alternative testing for non-Code pumps.
Refer to Section 3. 7.
3-9 S2PV-2R3 Rev. 3 May 1, 1992  


Pump
3.6 PUMP TEST PROGRAM RELIEF REQUEST S2PV-4R3 Relief Requests identify code requirements which are impractical for Surry Unit 2 and provide justification for the requested exception.
          *ASME  System  Inlet Disch  Diff
Where appropriate, alternate testing to be performed in lieu of the code requirements is proposed.
* PUMP INSERVICE TEST TABLE Flow          Bearing    Pump  Lubrication
3-10 Rev. 3 March 19, 1992  
* Relief
 
!dent.      Class Resist  Press Press  Press    Rate Vibration Temperature Speed  Level/Pressure Request 1-CH-P-2C    2    VAR      Q    Q      Q        Q    Q        NA        NA        NA          1.18 1-CH-P-2D    2    VAR      Q    Q      Q        Q    Q        NA        NA        NA          1.18 2-CC-P-2A    3    VAR      Q    Q      Q        Q    Q        NA        NA        NA          1 2-CC-P-2B    3    VAR      Q    Q      Q        Q    Q        NA        NA        NA          1 2-SW-P-lOA  3    VAR      Q    Q      0        0    0        NA        NA        NA          1 2-SW-P-lOB  3    VAR      Q    0      Q        Q    0        NA        NA        NA          1 1-EE-P-lB    NC    FIX      NA    Q    NA        0    Q        NA        NA        NA        1,PNC-1 1-EE-P-lC    NC    FIX      NA    0    NA        Q    0        NA        NA        NA        1,PNC-1 1-EE-P-lE    NC    FIX      NA    Q    NA        0    Q        NA        NA        NA        1,PNC-1 Note:  PNC-1 is not a request for relief but a description of alternative testing for non-Code pumps. Refer to Section 3. 7.
RELIEF REQUEST P-0 Relief Request Withdrawn 3-11 S2PV-4R3 Rev. 3 March 19, 1992  
3-9 S2PV-2R3                                                                                Rev. 3 May 1, 1992
 
* 3.6 PUMP TEST PROGRAM RELIEF REQUEST Relief Requests identify code requirements which are impractical for Surry Unit 2 and provide justification for the requested exception. Where appropriate, alternate testing to be performed in lieu of the code requirements is proposed .
RELIEF REQUEST P-1 systems:
*
Various Pump(s):
* S2PV-4R3 3-10 Rev. 3 March 19, 1992
IWP Progra.m Pumps.
* RELIEF REQUEST P-0 Relief Request Withdrawn
See PUMP INSERVICE TEST TABLE.
*
* S2PV-4R3 3-11
* Rev. 3 March 19, 1992
* systems:
Pump(s):
Various RELIEF REQUEST P-1 IWP Progra.m Pumps. See PUMP INSERVICE TEST TABLE.
Class Section XI Code Requirements For Which Relief Is Requested Measure pump bearing temperatures and vibration in mils.
Class Section XI Code Requirements For Which Relief Is Requested Measure pump bearing temperatures and vibration in mils.
Basis For Request Pump vibration and bearing temperature measurements are used to detect changes in the mechanical characteristics -of a pump.
Basis For Request Pump vibration and bearing temperature measurements are used to detect changes in the mechanical characteristics -of a pump.
Regular testing. should detect developing problems, thus repairs can be initiated prior to a pump becoming inoperable. The ASME Section XI minimum standards require measurements of the vibration amplitude displacement in mils every three months and bearing temperatures once per year.
Regular testing. should detect developing problems, thus repairs can be initiated prior to a pump becoming inoperable.
Our proposed program is based on vibration readings in velocity
The ASME Section XI minimum standards require measurements of the vibration amplitude displacement in mils every three months and bearing temperatures once per year.
* units rather than-vibration amplitude in mils displacement. This technique is an industry accepted method which is more sensitive to small changes that are indicative of developing mechanical problems and hence more meaningful. Velocity measurements detect not only high amplitude vibrations that indicate a major mechanical problem, but also the equally harmful low amplitude high frequency vibrations due to misalignment in balance, or bearing wear that usually go undetected by simple displacement measurements.
Our proposed program is based on vibration readings in velocity units rather than-vibration amplitude in mils displacement.
In addition, these readings go far beyond the capabilities of a bearing temperature monitoring program. A bearing will be seriously degraded piior to the detection of increased heat at the bearing housing. Quarterly vibration velocity readings should achieve a much higher probability of detecting developing problems than the once per year reading of bearing temperatures.
This technique is an industry accepted method which is more sensitive to small changes that are indicative of developing mechanical problems and hence more meaningful.
Velocity measurements detect not only high amplitude vibrations that indicate a major mechanical problem, but also the equally harmful low amplitude high frequency vibrations due to misalignment in balance, or bearing wear that usually go undetected by simple displacement measurements.
In addition, these readings go far beyond the capabilities of a bearing temperature monitoring program.
A bearing will be seriously degraded piior to the detection of increased heat at the bearing housing.
Quarterly vibration velocity readings should achieve a much higher probability of detecting developing problems than the once per year reading of bearing temperatures.
Bearing temperature tests present problems which include the following:
Bearing temperature tests present problems which include the following:
: 1. Certain systems have no recirculation test loops and a limited source of water. An enforced thirty minute run time would deplete the source .
: 1.
* S2PV-4R3 3-12 Rev. 3 March 19, 1992
Certain systems have no recirculation test loops and a limited source of water.
* 2.
An enforced thirty minute run time would deplete the source.
3-12 S2PV-4R3 Rev. 3 March 19, 1992
: 2.
RELIEF REQUEST P-1 (Cont.)
RELIEF REQUEST P-1 (Cont.)
The lubrication fluid for some pumps is taken from the~*
The lubrication fluid for some pumps is taken from the~*
process water, which can change te~perature depending on ambient conditions. Data trending for these cases is not meaningful.
process water, which can change te~perature depending on ambient conditions.
Therefore, the detection of possible bearing failure by a yearly temperature measurement is extremely unlikely. The small probability of detection of a bearing failure by temperature measurement does not justify the additional pump operating time required to obtain the measurements. In addition, it is impractical to measure bearing temperatures on many pumps.
Data trending for these cases is not meaningful.
Alternate Testing Proposed Pump vibration measurements will be taken in vibration velocity (in/sec). The evaluation of the readings will be per the attached table. The ranges of Test parameters given in the attached table were taken from ANSI/ASME OM (Part 6), An American National Standard In-Service Testing of Pumps .
Therefore, the detection of possible bearing failure by a yearly temperature measurement is extremely unlikely.
*
The small probability of detection of a bearing failure by temperature measurement does not justify the additional pump operating time required to obtain the measurements.
* S2PV-4R3 3-13 Rev. 3 March 19, 1992
In addition, it is impractical to measure bearing temperatures on many pumps.
Alternate Testing Proposed Pump vibration measurements will be taken in vibration velocity (in/sec).
The evaluation of the readings will be per the attached table.
The ranges of Test parameters given in the attached table were taken from ANSI/ASME OM (Part 6), An American National Standard In-Service Testing of Pumps.
3-13 S2PV-4R3 Rev. 3 March 19, 1992  


            *
RELIEF REQUEST P-1 (cont.)
* RELIEF REQUEST P-1 (cont.)
RANGES OF TEST PARAMETERS (1)
RANGES OF TEST PARAMETERS (1)
* PUMP               PUMP       TEST         ACCEPTABLE     ALERT                   REQUIRED.
PUMP PUMP TEST ACCEPTABLE ALERT REQUIRED.
TYPE               SPEED     PARAMETER     RANGE           RANGE                   ACTION RANGE Centrifugal       -<600 rpm   Va         52.5 Vr           >2.5Vr to 6Vr           >6 Vr And Vertical Line Shaft                                                 but not >10.5 mils     but not >22 mils
TYPE SPEED PARAMETER RANGE RANGE ACTION RANGE Centrifugal  
                    ~600 rpm   Vv         52.5 Vr (2)       >2.5 Vr to 6Vr         >6 Vr but not >0.325 in/sec   but not >0.70 in/sec Reciprocating                                               _>2.5 Vr to 6Vr         >6 Vr Note: (1)   Vr is the vibration reference value in the selected units Vd is vibration displacement measured peak-to-peak, unfiltered Vv is vibration velocity measured peak, unfiltered (2)   Small-values for Vr will produce small acceptable ranges for pump operation. Based on a small acceptable range, an adequately anq smoothly running pump .could be subject to corrective action. To avoid this situation, a minimum value for Vr of 0.05 in/sec has been established for velocity measurements. Pumps with a measured reference value below 0.05 in/sec shall have subsequent test results compared to an acceptable range based on 0.05 in/sec *. Use of a minimum value for Vr is allowed for a three year period which ends in August, 1993. This interim period.is discussed in the Surry Safety Evaluation Report received in August of 1990 (Serial No~.90-546).
-<600 rpm Va 52.5 Vr  
3-14
>2.5Vr to 6Vr  
* S2PV-3R3                                                                                  Rev. 3 March 19, 1992
>6 Vr And Vertical Line Shaft but not >10.5 mils but not >22 mils  
* RELIEF REQUEST P-2 Relief Request Withdrawn RELIEF REQUEST P-3 Relief Request Withdrawn
~600 rpm Vv 52.5 V (2) r
*
>2.5 Vr to 6Vr  
* S2PV-4R3 3-15 Rev. 3 March 19, 1992
>6 Vr but not >0.325 in/sec but not >0.70 in/sec Reciprocating
* System:
_>2.5 Vr to 6Vr  
>6 Vr Note:
(1)
Vr is the vibration reference value in the selected units Vd is vibration displacement measured peak-to-peak, unfiltered Vv is vibration velocity measured peak, unfiltered (2)
Small-values for Vr will produce small acceptable ranges for pump operation.
Based on a small acceptable range, an adequately anq smoothly running pump.could be subject
* S2PV-3R3 to corrective action.
To avoid this situation, a minimum value for Vr of 0.05 in/sec has been established for velocity measurements.
Pumps with a measured reference value below 0.05 in/sec shall have subsequent test results compared to an acceptable range based on 0.05 in/sec *.
Use of a minimum value for Vr is allowed for a three year period which ends in August, 1993.
This interim period.is discussed in the Surry Safety Evaluation Report received in August of 1990 (Serial No~.90-546).
3-14 Rev. 3 March 19, 1992  
 
RELIEF REQUEST P-2 Relief Request Withdrawn RELIEF REQUEST P-3 Relief Request Withdrawn 3-15 S2PV-4R3 Rev. 3 March 19, 1992  
 
System:
Pump(s):
Pump(s):
RELIEF REQUEST P-4 Recirculation Spray 2-RS-P-2A 2-RS-P-2B Class      2 Section XI Code Requirements For Which Relief Is Requested
Class RELIEF REQUEST P-4 Recirculation Spray 2-RS-P-2A 2-RS-P-2B 2
Section XI Code Requirements For Which Relief Is Requested
: 1. An inservice test shall be run on each pump nominally every 3 months during normal plant operation.
: 1. An inservice test shall be run on each pump nominally every 3 months during normal plant operation.
: 2. Each pump shall be run at least five minutes under conditions as stable as the system permits prior to measuring the test quantities.
: 2. Each pump shall be run at least five minutes under conditions as stable as the system permits prior to measuring the test quantities.
: 3. Measure inlet pressure and differential pressure .
: 3. Measure inlet pressure and differential pressure.
* Basis For Request
Basis For Request
: 1. The outside recirculation pumps take suction from the
: 1. The outside recirculation pumps take suction from the containment sump and discharge to the containment spray arrays.
* containment sump and discharge to the containment spray arrays. To test these deep draft pumps, the pump pit and the recirculation test loop must be filled with primary grade water and vented. The filling and venting process takes approximately 3 hours. After the test is completed, the pump pit and recirculation piping must be slowly drained to avoid floodi~g the basement.
To test these deep draft pumps, the pump pit and the recirculation test loop must be filled with primary grade water and vented.
Testing is the only source of operational based degradation for the pumps. During normal operation, the outside recirculation spray system lacks fluid inventory except for some primary grade water trapped in the bottom of the pump pit. The portions of the pump exposed to this standing water are made of stainless steel and not subject to corrosion.
The filling and venting process takes approximately 3 hours.
After the test is completed, the pump pit and recirculation piping must be slowly drained to avoid floodi~g the basement.
Testing is the only source of operational based degradation for the pumps.
During normal operation, the outside recirculation spray system lacks fluid inventory except for some primary grade water trapped in the bottom of the pump pit.
The portions of the pump exposed to this standing water are made of stainless steel and not subject to corrosion.
Considering the complexity of testing these pumps described above, the exposure to degradation caused by frequent testing and the lack fluid inventory during normal operation, there is no compensating increase in safety achieved by testing these pumps every three months.
Considering the complexity of testing these pumps described above, the exposure to degradation caused by frequent testing and the lack fluid inventory during normal operation, there is no compensating increase in safety achieved by testing these pumps every three months.
This position is supported by ANSI/ASME OM (Part 6), An American Standard In-Service Testing of Pumps, Paragraph 5.5, which states, "Pumps lacking required fluid inventory, (e.g.,
This position is supported by ANSI/ASME OM (Part 6), An American Standard In-Service Testing of Pumps, Paragraph 5.5, which states, "Pumps lacking required fluid inventory, (e.g.,
pumps in dry sumps) need not be tested in accordance with this Part every 3 months. These pumps shall be tested at least
pumps in dry sumps) need not be tested in accordance with this Part every 3 months.
* once every 2 years except as provided in para. 5.4. The required fluid* inventory shall be provided during this test."
These pumps shall be tested at least once every 2 years except as provided in para. 5.4.
3-16 S2PV-4R3                                             Rev. 3 March 19, 1992
The required fluid* inventory shall be provided during this test."
* RELIEF REQUEST P-4 (Cont.)
3-16 S2PV-4R3 Rev. 3 March 19, 1992  
 
RELIEF REQUEST P-4 (Cont.)
Paragraph 5.4 discribes the testing frequency of pumps in systems which are declared inoperable or not required for service.
Paragraph 5.4 discribes the testing frequency of pumps in systems which are declared inoperable or not required for service.
: 2. The test loop for these pumps contains a small volume of water. A four inch test recirculation line branches off the ten inch pump discharge line a short distance from the pump.
: 2. The test loop for these pumps contains a small volume of water.
A four inch test recirculation line branches off the ten inch pump discharge line a short distance from the pump.
The recirculation line discharges into the pump pit which is a cylinder approximately 50 feet deep and two feet in diameter.
The recirculation line discharges into the pump pit which is a cylinder approximately 50 feet deep and two feet in diameter.
Because of the small volume in the test loop, the hydraulic parameters stabilize quickly. Therefore, a five minute stabilization period is not necessary to achieve repeatable test results.
Because of the small volume in the test loop, the hydraulic parameters stabilize quickly.
In addition, if the pump is run for too long of a period, the water will heatup due to the limited water volume. This heatup can lead to excessive pressures in the test loop.*
Therefore, a five minute stabilization period is not necessary to achieve repeatable test results.
: 3. Inlet pressure instrumentation is not installed.   *However, the outside recirculation spray pumps obtain flow through a suction bell immersed in the pump casing. During testing, a casing level is established by filling the casing with PG
In addition, if the pump is run for too long of a period, the water will heatup due to the limited water volume.
* water to provide NPSH to the pump. Flow is recirculated through the pump, recirculation line, and back to the casing.
This heatup can lead to excessive pressures in the test loop.*
: 3. Inlet pressure instrumentation is not installed. *However, the outside recirculation spray pumps obtain flow through a suction bell immersed in the pump casing.
During testing, a casing level is established by filling the casing with PG water to provide NPSH to the pump.
Flow is recirculated through the pump, recirculation line, and back to the casing.
By establishing a casing level and maintaining it constant for the tests, any variation in pump differential pressure would be directly indicated by monitoring pump discharge pressure.
By establishing a casing level and maintaining it constant for the tests, any variation in pump differential pressure would be directly indicated by monitoring pump discharge pressure.
The static inlet pressure will be calculated and subtracted from t~e discharge pressure to yield a differential pressure.
The static inlet pressure will be calculated and subtracted from t~e discharge pressure to yield a differential pressure.
Alternate Testing Proposed These pumps will be flow tested on their recirculation paths at least once every two years. Maintaining a constant pump casing water level from test to test by filling the casing with PG water will yield the same suction pressure for each- test. The static inlet pressure will be calculated and subtracted from the discharge pressure to yield a differential pressure. After a two minute stabilization period, static inlet pressure, differential pressure as determined from the calculated static inlet pressure and measured discharge pressure, flow rate and vibration measurements will be taken .
Alternate Testing Proposed These pumps will be flow tested on their recirculation paths at least once every two years.
* S2PV'-4R3 3-17 Rev. 3 March 19, 1992
Maintaining a constant pump casing water level from test to test by filling the casing with PG water will yield the same suction pressure for each-test.
* System:
The static inlet pressure will be calculated and subtracted from the discharge pressure to yield a differential pressure.
Pump(s):   2-RS-P-lA RELIEF REQUEST P-5 Recirculation Spray 2-RS-P-lB Class      2 Section XI Code Requirements For Which Relief Is Requested Measure test quantities every quarter.
After a two minute stabilization period, static inlet pressure, differential pressure as determined from the calculated static inlet pressure and measured discharge pressure, flow rate and vibration measurements will be taken.
3-17 S2PV'-4R3 Rev. 3 March 19, 1992  
 
System:
Pump(s):
Class RELIEF REQUEST P-5 Recirculation Spray 2-RS-P-lA 2-RS-P-lB 2
Section XI Code Requirements For Which Relief Is Requested Measure test quantities every quarter.
Measure inlet pressure and differential pressure.
Measure inlet pressure and differential pressure.
Basis For Request These pumps are located inside containment, therefore, flow testing cannot be performed during plant operation.
Basis For Request These pumps are located inside containment, therefore, flow testing cannot be performed during plant operation.
Flow testing of these pumps requires the installation of a temporary recirculation line and the erection of a temporary dike to contain the recirculated water. Approximately five to six days are needed to set up, perform the test, and return the system to its normal configuration. Testing on a cold shutdown fr~quency would not allow enough time to plan for and perform a five to six day flow test.
Flow testing of these pumps requires the installation of a temporary recirculation line and the erection of a temporary dike to contain the recirculated water.
Because these pumps are designed to take suction from a *sump, measurement of inlet pressure is not practical. Also, the sump level canriot vary more than one foot during testing because of the limitations in the test dike design and the requirements for NPSH. Therefore, inlet pressure will be calculated from sump level.
Approximately five to six days are needed to set up, perform the test, and return the system to its normal configuration.
Alternate Testing Proposed These pumps will be bump tested to verify operability every quarter. Each pump-is equipped with a sensor to detect pump rotation which alarms in the control room. This alarm will be observed during each pump test. A flow test which includes vibration measurement will be performed every reactor refueling.
Testing on a cold shutdown fr~quency would not allow enough time to plan for and perform a five to six day flow test.
Differential pressure will be determined from the measured-discharged pressure and the calculated inlet pressure .
Because these pumps are designed to take suction from a *sump, measurement of inlet pressure is not practical.
* S2PV-4R3 3-18 Rev. 3 March 19, 1992
Also, the sump level canriot vary more than one foot during testing because of the limitations in the test dike design and the requirements for NPSH.
* RELIEF REQUEST P-6 Relief Request Withdrawn
Therefore, inlet pressure will be calculated from sump level.
*
Alternate Testing Proposed These pumps will be bump tested to verify operability every quarter.
* S2PV-4R3 3-19 Rev. 3 March 19, 1992
Each pump-is equipped with a sensor to detect pump rotation which alarms in the control room.
* System:
This alarm will be observed during each pump test.
Pump(s):   2-RH-P-lA RELIEF REQUEST P-7 Residual Heat Removal 2-RH-P-lB Class      2
A flow test which includes vibration measurement will be performed every reactor refueling.
  .Section XI Code Requirements For Which Relief Is Requested Frequency .of Pump Test.
Differential pressure will be determined from the measured-discharged pressure and the calculated inlet pressure.
Measure inlet pressure.                                             l Basis For Request The low pressure RHR pumps take suction from and discharge to the reactor coolant system which operates at 2235 psig. This is well above the operating pressure for the RHR pumps. Therefore, testing.during normal operation is not possible.
3-18 S2PV-4R3 Rev. 3 March 19, 1992  
The use of permanent inlet and discharge pressure* instrumentation
 
* for determining differential pressure is not feasible because the inlet pressure can vary between 20 and 200 psig depending upon plant conditions. Therefore, ranges for the inlet and discharge pressure gauges must vary from test to test. The current method is to install temporary inlet and discharge gauges. Properly matching the ranges of the temporary instrumentation to existing plant con~itions has proved to be difficult.
RELIEF REQUEST P-6 Relief Request Withdrawn 3-19 S2PV-4R3 Rev. 3 March 19, 1992  
To eliminate this difficulty, differential pressure gauges will be installed during the next refueling outage., With the installation of the differential pressure gauges, the measurement of inlet pressure will no longer be necessary to trend pump performance. The new ASME Code for pump testing, Section IST, Subsection ISTB, Inservice Testing of Pumps in Light-Water Reactor Power Plants, does not require the measurement of inlet pressure if differential pressure gauges are used *
 
* S2PV-4R3 3-20 Rev. 3 March 19, 1992
RELIEF REQUEST P-7 System:
* RELIEF REQUEST P-7 (Cont.)
Residual Heat Removal Pump(s):
Also, the installation of the temporary gauges result in a high dose (approximately 70 to 100 mrem per gauge). Because measurement of inlet pressure presents a hardship in terms of dose and does not add meaningful information for trending pump performance, inlet pressure will not be measured after the installation of the differential pressure gauges.
Class 2-RH-P-lA 2-RH-P-lB 2  
Alternate Testing Proposed Pumps will be tested each cold shutdown (but not more frequently than every three months). Differential pressure will be measured directly after the installation of the differential pressure gauges during the next refueling outage (first quarter, 1993).
.Section XI Code Requirements For Which Relief Is Requested Frequency.of Pump Test.
At this time, inlet pressure will no longer be measur~d .
Measure inlet pressure.
*
Basis For Request The low pressure RHR pumps take suction from and discharge to the reactor coolant system which operates at 2235 psig.
* S2PV-4R3 3-21 Rev. 3 March 19, 1992
This is well above the operating pressure for the RHR pumps.
* RELIEF REQUEST P-8 Relief Request Withdrawn RELIEF REQUEST P-9 Relief Request Withdrawn RELIEF REQUEST P-10 Relief Request Withdrawn RELIEF REQUEST P-11
Therefore, testing.during normal operation is not possible.
* Relief Request Withdrawn RELIEF REQUEST P-12 Relief Request Withdrawn RELIEF REQUEST P-13 Relief Request Withdrawn RELIEF REQUEST P-14
The use of permanent inlet and discharge pressure* instrumentation for determining differential pressure is not feasible because the inlet pressure can vary between 20 and 200 psig depending upon plant conditions.
* S2PV-4R3 Relief Request Withdrawn 3-22 Rev. 3 March 19, 1992
Therefore, ranges for the inlet and discharge pressure gauges must vary from test to test.
* system:
The current method is to install temporary inlet and discharge gauges.
INTERIM RELIEF REQUEST P-15 Residual Heat Removal Inside Recirculation Spray Pump(s):   2-RH-P-lA       2-RH-P-lB 2-RS-P-lA      2-RS-P-lB Class     2 Section XI Code Requirements For Which Interim Relief Is Requested Measure Flow Rate Within an Accuracy of+ 2 Percent.
Properly matching the ranges of the temporary instrumentation to existing plant con~itions has proved to be difficult.
To eliminate this difficulty, differential pressure gauges will be installed during the next refueling outage., With the installation of the differential pressure gauges, the measurement of inlet pressure will no longer be necessary to trend pump performance.
The new ASME Code for pump testing, Section IST, Subsection ISTB, Inservice Testing of Pumps in Light-Water Reactor Power Plants, does not require the measurement of inlet pressure if differential pressure gauges are used
* 3-20 S2PV-4R3 Rev. 3 March 19, 1992 l
 
RELIEF REQUEST P-7 (Cont.)
Also, the installation of the temporary gauges result in a high dose (approximately 70 to 100 mrem per gauge).
Because measurement of inlet pressure presents a hardship in terms of dose and does not add meaningful information for trending pump performance, inlet pressure will not be measured after the installation of the differential pressure gauges.
Alternate Testing Proposed Pumps will be tested each cold shutdown (but not more frequently than every three months).
Differential pressure will be measured directly after the installation of the differential pressure gauges during the next refueling outage (first quarter, 1993).
At this time, inlet pressure will no longer be measur~d.
3-21 S2PV-4R3 Rev. 3 March 19, 1992  
 
S2PV-4R3 RELIEF REQUEST P-8 Relief Request Withdrawn RELIEF REQUEST P-9 Relief Request Withdrawn RELIEF REQUEST P-10 Relief Request Withdrawn RELIEF REQUEST P-11 Relief Request Withdrawn RELIEF REQUEST P-12 Relief Request Withdrawn RELIEF REQUEST P-13 Relief Request Withdrawn RELIEF REQUEST P-14 Relief Request Withdrawn 3-22 Rev. 3 March 19, 1992  
 
system:
INTERIM RELIEF REQUEST P-15 Residual Heat Removal Inside Recirculation Spray Pump(s):
2-RH-P-lA 2-RH-P-lB 2-RS-P-lB 2-RS-P-lA Class 2
Section XI Code Requirements For Which Interim Relief Is Requested Measure Flow Rate Within an Accuracy of+ 2 Percent.
Basis For Request On May 30, 1991, personnel at Surry Power station determined that flow instrumentation used for testing pumps in the Surry Units 1 and 2 ASME Section XI Inservice Testing Programs may have flow instrument loop accuracies that are not within+ 2 % as required by the Code because certain calibration requirements may not have been met prior to using the instruments.
Basis For Request On May 30, 1991, personnel at Surry Power station determined that flow instrumentation used for testing pumps in the Surry Units 1 and 2 ASME Section XI Inservice Testing Programs may have flow instrument loop accuracies that are not within+ 2 % as required by the Code because certain calibration requirements may not have been met prior to using the instruments.
* An evaluation* was performed to determine if the decreased instrument accuracies affected the operable status of the pumps.
An evaluation* was performed to determine if the decreased instrument accuracies affected the operable status of the pumps.
The last measured flow rates for the affected pumps were adjusted to compensate for the uncertainty in the decreased instrument accuracies. The adjustment factor (FA) in gpm was determined as follows:
The last measured flow rates for the affected pumps were adjusted to compensate for the uncertainty in the decreased instrument accuracies.
FA= FS*(CSA - 2) where FS = the full range of the instrument in gpm CSA= the revised loop accuracy in percent For test procedures that compare the measured flow to the ASME acceptance range, the adjustment factor was subtracted from the last measured flow rate. The adjusted flow rate was then compared to the acceptance criteria *
The adjustment factor (FA) in gpm was determined as follows:
* S2PV-4R3 3-23 Rev. 3 May 18, 1992
FA= FS*(CSA -
* INTERIM RELIEF REQUEST P-15 (Cont.)
: 2) where FS = the full range of the instrument in gpm CSA= the revised loop accuracy in percent For test procedures that compare the measured flow to the ASME acceptance range, the adjustment factor was subtracted from the last measured flow rate.
For test procedures that set flow to a reference value and then measure differential pressure, the pump curve must be used to determine the adjusted differential pressure. In these cases, FA was added to the recorded reference flow rate which results in an adjusted differential pressure as determined from the pump curve that is lower than the original test value. The adjusted differential pressure was then compared to the acceptance criteria.
The adjusted flow rate was then compared to the acceptance criteria
* 3-23 S2PV-4R3 Rev. 3 May 18, 1992  
 
INTERIM RELIEF REQUEST P-15 (Cont.)
For test procedures that set flow to a reference value and then measure differential pressure, the pump curve must be used to determine the adjusted differential pressure.
In these cases, FA was added to the recorded reference flow rate which results in an adjusted differential pressure as determined from the pump curve that is lower than the original test value.
The adjusted differential pressure was then compared to the acceptance criteria.
The evaluation showed that the Section XI pumps have adequate operational margin after the affects of the decreased instrument accuracies were factored into the comparison of test results to the Section XI acceptance criteria.
The evaluation showed that the Section XI pumps have adequate operational margin after the affects of the decreased instrument accuracies were factored into the comparison of test results to the Section XI acceptance criteria.
Alternate Testing Proposed Pumps 2-RH-P-1A and Bare tested every cold shutdown. For thesa pumps, the necessary instrument calibrations will be performed by the first required (cold shutdown) test after September 30, 1991 to ensure that the flow instrument accuracies are within+ 2.0 %.
Alternate Testing Proposed Pumps 2-RH-P-1A and Bare tested every cold shutdown.
The flow transmitters for these pumps are located inside containment, which is a subatmospheric design, and are
For thesa pumps, the necessary instrument calibrations will be performed by the first required (cold shutdown) test after September 30, 1991 to ensure that the flow instrument accuracies are within+ 2.0 %.
* inaccessible during normal operation
The flow transmitters for these pumps are located inside containment, which is a subatmospheric design, and are inaccessible during normal operation
* Pumps 2-RS-P-1A and Bare tested every reactor refueling per relief request P-5. For these pumps, the necessary instrument calibrations will be performed with accuracies within+ 2.0 % and the pumps retested during the next scheduled refueling outage when a temporary dike can be installed in containment to support the pump testing *
* Pumps 2-RS-P-1A and Bare tested every reactor refueling per relief request P-5.
* S2PV-4R3 3-24 Rev. 3 May 18, 1992
For these pumps, the necessary instrument calibrations will be performed with accuracies within+ 2.0 % and the pumps retested during the next scheduled refueling outage when a temporary dike can be installed in containment to support the pump testing
* 3-24 S2PV-4R3 Rev. 3 May 18, 1992  


*                        . RELIEF REQUEST P-16 System:     Component Cooling Pump(s):   1-CC-P-lC 1-CC-P-lD Class       3 Section XI Code. Requirements For Which Relief Is Requested ASME Section XI, Subarticle IWP-3110 requires reference values to be one or more fixed set of measured values. All subsequent test results shall be compared to these reference values.
. RELIEF REQUEST P-16 System:
Basis For Request During testing of the component cooling.water pumps, flow is adjusted to the reference flow rate using an 18 inch butterfly valve. The butterfly valve is a crude throttling device and does not provide the fine tuning that is required to duplicate the reference flow rate from test to test. Consequently, throttling to the same reference flow rate during each test is not
Component Cooling Pump(s):
* practical .
1-CC-P-lC 1-CC-P-lD Class 3
Alternate Testing Proposed Two reference *points of flow versus differential pressure will be established from the reference test for each pump. A straight line approximation will be used to determine differential pressure reference points as a function of flow between the two test points. By keeping the difference between two test points small, the straight line is a good approximation of the pump curve within the two test points.
Section XI Code. Requirements For Which Relief Is Requested ASME Section XI, Subarticle IWP-3110 requires reference values to be one or more fixed set of measured values.
During the subsequent tests, test flow will be throttled as close as practic_al to the reference flow value. The test flow must fall between the two reference points used to establish the straight line approximation. The test flow and the corresponding differential pressure will be compared to either graphical and/or tabular acceptance criteria based on the straight line approximation of the reference pump curve based on the straight line approximation of the reference pump curve .
All subsequent test results shall be compared to these reference values.
* S2PV-4R3 3-25 Rev. 3 March 19, 1992
Basis For Request During testing of the component cooling.water pumps, flow is adjusted to the reference flow rate using an 18 inch butterfly valve.
* RELIEF REQUEST P-16 (Cont.)
The butterfly valve is a crude throttling device and does not provide the fine tuning that is required to duplicate the reference flow rate from test to test.
For example, given the straight line equation determined from the two .reference points for flow and differential pressure:
Consequently, throttling to the same reference flow rate during each test is not practical.
Prdif f = a + b*Q where
Alternate Testing Proposed Two reference *points of flow versus differential pressure will be established from the reference test for each pump.
A straight line approximation will be used to determine differential pressure reference points as a function of flow between the two test points.
By keeping the difference between two test points small, the straight line is a good approximation of the pump curve within the two test points.
During the subsequent tests, test flow will be throttled as close as practic_al to the reference flow value.
The test flow must fall between the two reference points used to establish the straight line approximation.
The test flow and the corresponding differential pressure will be compared to either graphical and/or tabular acceptance criteria based on the straight line approximation of the reference pump curve based on the straight line approximation of the reference pump curve.
3-25 S2PV-4R3 Rev. 3 March 19, 1992  
 
RELIEF REQUEST P-16 (Cont.)
For example, given the straight line equation determined from the two.reference points for flow and differential pressure:
Prdif f = a + b*Q where
* Prdiff = the reference differential pressure based on the test value for flow (Q) recorded during subsequent tests and, a and bare constants, the acceptance criteria for the flow (Q) would be as follows:
* Prdiff = the reference differential pressure based on the test value for flow (Q) recorded during subsequent tests and, a and bare constants, the acceptance criteria for the flow (Q) would be as follows:
Upper   Required.Action=   l.03*Prdiff Upper  Alert           = 1.02*Prdiff Lower  Alert           = 0.93*Prdiff Lower  Required Action=   0.90*Prdiff The multipliers on Prdiff are taken from Table IWP-3100-2 in Section XI. The actual recorded differential pressure (Padiff) will then be compared to the acceptance criteria determined from Prdiff* Also, the tests results can be trended from test to test
Upper Upper Lower Lower Required.Action= l.03*Prdiff Alert  
* by normalizing Padiff to Prdiff* For acceptable operation, the ratio of Padiff/Prdiff must fall between 0.93 and 1.02. A decrease in the ratio from test t6 test would indicate a steady.
= 1.02*Prdiff Alert  
degradation in .pump performance.*                              *
= 0.93*Prdiff Required Action= 0.90*Prdiff The multipliers on Prdiff are taken from Table IWP-3100-2 in Section XI.
* S2PV-4R3 3-26 Rev. 3 March 19, 1992
The actual recorded differential pressure (Padiff) will then be compared to the acceptance criteria determined from Prdiff*
* System:
Also, the tests results can be trended from test to test by normalizing Padiff to Prdiff*
Pump(s):
For acceptable operation, the ratio of Padiff/Prdiff must fall between 0.93 and 1.02.
Various RELIEF REQUEST P-17 IWP Program Pumps. See PUMP INSERVICE TEST TABLE.
A decrease in the ratio from test t6 test would indicate a steady.
degradation in.pump performance.*
3-26 S2PV-4R3 Rev. 3 March 19, 1992  
 
RELIEF REQUEST P-17 System:
Various Pump(s):
IWP Program Pumps.
See PUMP INSERVICE TEST TABLE.
Class Section XI Code Requirements For Which Relief Is Requested Pump inlet pressure shall be measured before starting a pump and during the test (Table IWP-3100-1)
Class Section XI Code Requirements For Which Relief Is Requested Pump inlet pressure shall be measured before starting a pump and during the test (Table IWP-3100-1)
Basi~ For Request If the pump being tested is in operation as a result of plant or system needs, it is unreasonable to reconfigure system lineups just to provide for the measurement of static inlet pressure.
Basi~ For Request If the pump being tested is in operation as a result of plant or system needs, it is unreasonable to reconfigure system lineups just to provide for the measurement of static inlet pressure.
Inlet pressure prior to pump startup is not a significant*
Inlet pressure prior to pump startup is not a significant*
parameter needed for evaluating pump performance or condition.
parameter needed for evaluating pump performance or condition.
Alternate Testing Proposed
Alternate Testing Proposed When performing a test on a pump that is already in operation, inlet pressure will only be measured during pump operation.
* When performing a test on a pump that is already in operation, inlet pressure will only be measured during pump operation .
3-27 S2PV-4R3 Rev. 3 March 19, 1992  
* S2PV-4R3 3-27 Rev. 3 March 19, 1992
 
* system:
system:
Pump(s): l-CH-P-2C RELIEF REQUEST P-18 Chemical and Volume Control l-CH-P-20 Class    2 Section XI Code Requirements For Which Relief Is Requested The full-scale range of each instrument shall be three times the reference value or less (IWP-4120).
Pump(s):
Basis For Request The inlet pressure gauges for the boric acid transfer pumps have a full scale range of o to 15 psig. These instruments were sized by evaluating the static pressures present at the suction side of the pumps and applying the three times rule of IWP-4120. The static pressures range from 6 to 7 psig.
Class RELIEF REQUEST P-18 Chemical and Volume Control l-CH-P-2C l-CH-P-20 2
When the pumps are started, the pressure at the suction side of
Section XI Code Requirements For Which Relief Is Requested The full-scale range of each instrument shall be three times the reference value or less (IWP-4120).
* the pumps drops to approximately 2 psig; therefore, the inlet pressure gauges do not meet the three times rule for dynamic inlet pressure.
Basis For Request The inlet pressure gauges for the boric acid transfer pumps have a full scale range of o to 15 psig.
These instruments were sized by evaluating the static pressures present at the suction side of the pumps and applying the three times rule of IWP-4120.
The static pressures range from 6 to 7 psig.
When the pumps are started, the pressure at the suction side of the pumps drops to approximately 2 psig; therefore, the inlet pressure gauges do not meet the three times rule for dynamic inlet pressure.
Using a lower range pressure gauge (i.e. o to 5 psig) would meet the three times rule for dynamic inlet pressure; however, the lower range gauge could not measure static inlet pressure and the lower range gauges would be repeatedly exposed to an overrange condition (static pressures in excess of 5 psig) which would damage the instruments.
Using a lower range pressure gauge (i.e. o to 5 psig) would meet the three times rule for dynamic inlet pressure; however, the lower range gauge could not measure static inlet pressure and the lower range gauges would be repeatedly exposed to an overrange condition (static pressures in excess of 5 psig) which would damage the instruments.
Using a lower range temporary gauge on a quarterly basis presents a hardship because the process fluid contains boric acid and is contaminated. If contaminated, the temporary instruments would probably become waste material.
Using a lower range temporary gauge on a quarterly basis presents a hardship because the process fluid contains boric acid and is contaminated.
However, with the current Oto 15 psig inlet pressure gauges, a differential pressure can be determined that exceeds the accuracy requirements for differential pressure. Each boric acid transfer pump inlet pressure gauge (Oto 15 psig range) and discharge pressure gauge (0 to 150 psig range) has an instrument loop accuracy of 1.59%. Computing the maximum error for differential pressure using the current instrument configuration yields an error of 2.6 psid .
If contaminated, the temporary instruments would probably become waste material.
* S2PV-4R5 3-28 Rev. 3 May 1, 1992
However, with the current Oto 15 psig inlet pressure gauges, a differential pressure can be determined that exceeds the accuracy requirements for differential pressure.
* RELIEF REQUEST P-18 (Cont.)
Each boric acid transfer pump inlet pressure gauge (Oto 15 psig range) and discharge pressure gauge (0 to 150 psig range) has an instrument loop accuracy of 1.59%.
Computing the Code allowed error for differential pressure for an inlet pressure gauge with a 2% accuracy and a Oto 5 psig range and a discharge pressure instrument with a 2% accuracy and a Oto 150 psig range yields an error of 3.1 psid. With the current instrument configuration, the loop accuracy of each pressure instrument could be as high as 1.8%, which equates to a 2.97 psid error, and still be within the Code allowed error of 3.1 psid for differential pressure. Therefore, for purposes of trending pump degradation using differential pressure and flow, the current instrument is adequate as long as the pressure instrument loop accuracies remain at or below 1.8%.
Computing the maximum error for differential pressure using the current instrument configuration yields an error of 2.6 psid.
3-28 S2PV-4R5 Rev. 3 May 1, 1992  
 
RELIEF REQUEST P-18 (Cont.)
Computing the Code allowed error for differential pressure for an inlet pressure gauge with a 2% accuracy and a Oto 5 psig range and a discharge pressure instrument with a 2% accuracy and a Oto 150 psig range yields an error of 3.1 psid.
With the current instrument configuration, the loop accuracy of each pressure instrument could be as high as 1.8%, which equates to a 2.97 psid error, and still be within the Code allowed error of 3.1 psid for differential pressure.
Therefore, for purposes of trending pump degradation using differential pressure and flow, the current instrument is adequate as long as the pressure instrument loop accuracies remain at or below 1.8%.
Alternate Testing Proposed The inlet pressure gauges with a full scale range of o to 15 psig will be used to measure both static and dynamic inlet pressures.
Alternate Testing Proposed The inlet pressure gauges with a full scale range of o to 15 psig will be used to measure both static and dynamic inlet pressures.
Also, the loop accuracies for the inlet and discharge pressure gauges will be maintained at or below an accuracy of 1.8% to ensure that the differential pressure error is below that the differential pressure error allowed by the Code .
Also, the loop accuracies for the inlet and discharge pressure gauges will be maintained at or below an accuracy of 1.8% to ensure that the differential pressure error is below that the differential pressure error allowed by the Code.
*
3-29 S2PV-4R5 Rev. 3 May 1, 1992  
* S2PV-4R5 3-29 Rev. 3 May 1, 1992


3.7 ALTERNATIVE TESTING FOR NON-CODE PUMPS According to the minutes of public meeting on Generic Letter 89-04, "Paragraph (g) of 10CFR 50.55a requires the use of Section XI of the ASME Code for inservice testing of components covered by the Code. For other components important to safety, the licensee also has the burden of demonstrating their continued operability." The minutes go on to state that, "The Code-required IST program is a reasonable vehicle to provide a periodic demonstration of the operability of pumps and valves not covered by the Code. If non-Code.
3.7 ALTERNATIVE TESTING FOR NON-CODE PUMPS S2PV-4R3 According to the minutes of public meeting on Generic Letter 89-04, "Paragraph (g) of 10CFR 50.55a requires the use of Section XI of the ASME Code for inservice testing of components covered by the Code.
components are included in the ASME Code IST program (or some other licensee-developed inservice testing program) and certain Code provisions cannot be met, the Commission regulations (10 CFR 50.55a) do not require a
For other components important to safety, the licensee also has the burden of demonstrating their continued operability."
          'request for relief' to be submitted to the staff.
The minutes go on to state that, "The Code-required IST program is a reasonable vehicle to provide a periodic demonstration of the operability of pumps and valves not covered by the Code.
Nevertheless, documentation that provides assurance of the continued operability of the non-Code components through the performed tests should be available at the plant site." Non-Code components are components that are important to safety but are not in systems or portions of systems that are classified ASME Class 1, 2 or 3.
If non-Code.
* Surry Power Station has elected to include certain non-Code components in the ASME IST program. Where the Code provisions cannot be met for non-Code components, alternative testing is performed that is adequate to ensure continued operability. The alternate testing is described in this section. There may be other deviations from Code provisions that are not described in this section. For these cases, documentation is available at the plant site.
components are included in the ASME Code IST program (or some other licensee-developed inservice testing program) and certain Code provisions cannot be met, the Commission regulations (10 CFR 50.55a) do not require a  
As indicated in the minutes of public meeting on Generic Letter 89-04, a 'request for relief' need not be submitted for non-Code components. Therefore, the alternative tests described in this section are not
'request for relief' to be submitted to the staff.
          'requests for relief' but are provided for information.
Nevertheless, documentation that provides assurance of the continued operability of the non-Code components through the performed tests should be available at the plant site."
The procedure of providing alternative testing descriptions instead of requests for relief for non-Code components begins with Revision 3. Requests for relief that were approved by the NRC in Revision 2 for non-Code components will remain in place .
Non-Code components are components that are important to safety but are not in systems or portions of systems that are classified ASME Class 1, 2 or 3.
* S2PV-4R3 3-30 Rev. 3 March 19, 1992
Surry Power Station has elected to include certain non-Code components in the ASME IST program.
* System:
Where the Code provisions cannot be met for non-Code components, alternative testing is performed that is adequate to ensure continued operability.
The alternate testing is described in this section.
There may be other deviations from Code provisions that are not described in this section.
For these cases, documentation is available at the plant site.
As indicated in the minutes of public meeting on Generic Letter 89-04, a 'request for relief' need not be submitted for non-Code components.
Therefore, the alternative tests described in this section are not  
'requests for relief' but are provided for information.
The procedure of providing alternative testing descriptions instead of requests for relief for non-Code components begins with Revision 3.
Requests for relief that were approved by the NRC in Revision 2 for non-Code components will remain in place.
3-30 Rev. 3 March 19, 1992  
 
System:
Pump(s):
Pump(s):
NON-CODE ALTERNATIVE TESTING PNC-1 Fuel Oil 1-EE-P-1B 1-EE-P-1C 1-EE-P-1E Class    NC Section XI Code Requirements Which Cannot Be Met Measure test quantities after the pump has been running for five minutes.
Class NON-CODE ALTERNATIVE TESTING PNC-1 Fuel Oil 1-EE-P-1B 1-EE-P-1C 1-EE-P-1E NC Section XI Code Requirements Which Cannot Be Met Measure test quantities after the pump has been running for five minutes.
Measure pump bearing temperatures and vibration in mils.
Measure pump bearing temperatures and vibration in mils.
Measure Inlet and differential pressure.
Measure Inlet and differential pressure.
Basis For Alternate Testing The pump operating time is limited due to operational restraints.
Basis For Alternate Testing The pump operating time is limited due to operational restraints.
While the diesels are running, these pumps start automatically
While the diesels are running, these pumps start automatically when the fuei oil level in the day tank reaches the low level switch, and stop when the level reaches the high level switch.
* when the fuei oil level in the day tank reaches the low level switch, and stop when the level reaches the high level switch.
The pump run time can vary depending upon the diesel load and the resulting fuel consumption rate. If the pumps are allowed to run for five minutes prior to measuring the test quantities and the fuel consumption rate is low, not enough time is available to gather all of the required Section XI test data.
The pump run time can vary depending upon the diesel load and the resulting fuel consumption rate. If the pumps are allowed to run for five minutes prior to measuring the test quantities and the fuel consumption rate is low, not enough time is available to gather all of the required Section XI test data.
The basis for alternative testing for vibration and temperature is described in Relief Request P-1.
The basis for alternative testing for vibration and temperature is described in Relief Request P-1.
The diesel fuel oil transfer pumps are positive displacement pumps. One characteristic of positive displacement pumps is that the discharge pressure is independent of inlet pressure.
The diesel fuel oil transfer pumps are positive displacement pumps.
Therefore, to determine pump degradation, only discharge pressure need be measured and compared to the acceptance criteria. The ASME OM Code-1990, Subsection ISTB, Table ISTB 5.2-1, which is replacing Section XI, Subsection IWP, requires that only discharge pressure need be measured for positive displacement pumps .
One characteristic of positive displacement pumps is that the discharge pressure is independent of inlet pressure.
* S2PV-4R3 3-31 Rev. 3 March 19, 1992
Therefore, to determine pump degradation, only discharge pressure need be measured and compared to the acceptance criteria.
* NON-CODE ALTERNATIVE TESTING PNC-1 (Cont.)
The ASME OM Code-1990, Subsection ISTB, Table ISTB 5.2-1, which is replacing Section XI, Subsection IWP, requires that only discharge pressure need be measured for positive displacement pumps.
3-31 S2PV-4R3 Rev. 3 March 19, 1992  
 
NON-CODE ALTERNATIVE TESTING PNC-1 (Cont.)
Alternate Testing The measurement of Section XI quantities will begin when the pump automatically starts on a low tank level signal.
Alternate Testing The measurement of Section XI quantities will begin when the pump automatically starts on a low tank level signal.
The alternative testing for vibration and temperature is described in Relief Request P-1.
The alternative testing for vibration and temperature is described in Relief Request P-1.
Inlet pressure will not be measured. Discharge pressure, flow and vibration will be measured at least once every three months in accordance with Section XI requirements. The acceptance criteria for flow and discharge pressure will be based on the criteria given in ASME OM Code-1990, Subsection ISTB, Table ISTB 5.2-2b. The acceptance criteria for vibration is addressed in Relief Request P-1 .
Inlet pressure will not be measured.
*
Discharge pressure, flow and vibration will be measured at least once every three months in accordance with Section XI requirements.
* S2PV-4R3 3-32 Rev. 3 March 19, 1992
The acceptance criteria for flow and discharge pressure will be based on the criteria given in ASME OM Code-1990, Subsection ISTB, Table ISTB 5.2-2b.
The acceptance criteria for vibration is addressed in Relief Request P-1.
3-32 S2PV-4R3 Rev. 3 March 19, 1992  


** 4.0 VALVE INSERVICE TEST PROGRAM DESCRIPTION 4.1   PROGRAM DEVELOPMENT PHILOSOPHY Surry Power station Unit 2 is* a Pressurized Water Reactor being operated in compliance with the ASME Boiler and Pressure Vessel Code. The qode requires*
4.0 VALVE INSERVICE TEST PROGRAM DESCRIPTION 4.1 PROGRAM DEVELOPMENT PHILOSOPHY S2PV-5R3 Surry Power station Unit 2 is* a Pressurized Water Reactor being operated in compliance with the ASME Boiler and Pressure Vessel Code.
periodic testing of certain safety related valves in order to verify their operability and physical integrity. The Surry Unit 2 Val.ve Inservice Test Program satisfies thes~ requirements.
The qode requires*
The program will detect potentially adverse changes in the mechanical condition of valves within the scope of Section XI, Subsection IWV of the Code. This includes all valves "which are required to perform a specific function in shutting down a reactor to the cold shutdown condition or in mitigating the consequences of' an accident." It is important to note that the scope of ASME Section XI and the Surry Inservice Testing Program for its implementation includes many valves which are not required to operate to meet FSAR license condition of hot shutdown nor limiting conditions in the plant Technical Specifications. In these cases, the requirements of Section XI shall be met except I
periodic testing of certain safety related valves in order to verify their operability and physical integrity.
* where relief has been granted .
The Surry Unit 2 Val.ve Inservice Test Program satisfies thes~ requirements.
To generate the Surry Unit 2 Valve Program, ASME Class 1, 2 and 3 valves were analyzed to determine their required type and frequency of testing. The valves to be tested under Section XI, Subsection IWV commitments
The program will detect potentially adverse changes in the mechanical condition of valves within the scope of Section XI, Subsection IWV of the Code.
            .are listed by system and drawing in the Valve Test
This includes all valves "which are required to perform a specific function in shutting down a reactor to the cold shutdown condition or in mitigating the consequences of' an accident." It is important to note that the scope of ASME Section XI and the Surry Inservice Testing Program for its implementation includes many valves which are not required to operate to meet FSAR license condition of hot shutdown nor limiting conditions in the plant Technical Specifications.
            *Tables.
In these cases, the requirements of Section XI shall be met except where relief has been granted.
To generate the Surry Unit 2 Valve Program, ASME Class 1, 2 and 3 valves were analyzed to determine their required type and frequency of testing.
The valves to be tested under Section XI, Subsection IWV commitments  
.are listed by system and drawing in the Valve Test  
*Tables.
Surry Unit 2 is committed to meeting the leak rate testing requirements of:
Surry Unit 2 is committed to meeting the leak rate testing requirements of:
: 1)   lOCFRSO, Appendix J for containmerit isolation valves and
: 1) 10CFRSO, Appendix J for containmerit isolation valves and
: 2)   Section XI for other valves for which seat leakage is limited to a specific maximum amount (i.e.
: 2)
Section XI for other valves for which seat leakage is limited to a specific maximum amount (i.e.
pressure isolation valves) unless relief is specifically requested from Section XI requirements.
pressure isolation valves) unless relief is specifically requested from Section XI requirements.
Valves subject to leak testing per Appendix J will be tested to the requirements of Section XI, Paragraphs IWV-3426 and 3427. Appendix J satisfies the testing requirements of Section XI, Paragraphs IWV-3421 to 3425 .
Valves subject to leak testing per Appendix J will be tested to the requirements of Section XI, Paragraphs IWV-3426 and 3427.
* S2PV-5R3 4-1 Rev. 3
Appendix J satisfies the testing requirements of Section XI, Paragraphs IWV-3421 to 3425.
                                                          *March 19, 1992
4-1 Rev. 3  
* The Code recognizes that certain of its requirements may be impractical for a specific plant and contains provisions for requesting relief from impractical requirements.
*March 19, 1992 I
 
The Code recognizes that certain of its requirements may be impractical for a specific plant and contains provisions for requesting relief from impractical requirements.
The relief requests for the Valve Inservice Test Program identify testing impracticalities, provide technical basis for the request and propose alternate testing where warranted.
The relief requests for the Valve Inservice Test Program identify testing impracticalities, provide technical basis for the request and propose alternate testing where warranted.
The stroke times of solenoid controlled, air operated valves is both extremely rapid and subject to considerable variation. Exception is taken to complying with stroke time variations defined by Paragraph IWV-3417(a).
The stroke times of solenoid controlled, air operated valves is both extremely rapid and subject to considerable variation.
Exception is taken to complying with stroke time variations defined by Paragraph IWV-3417(a).
The Surry Unit 2 Valve Inservice Test Program complies with the intent of the applicable codes, regulations and guidelines and it will make a positive contribution to the safe operation of the plant._
The Surry Unit 2 Valve Inservice Test Program complies with the intent of the applicable codes, regulations and guidelines and it will make a positive contribution to the safe operation of the plant._
4.2 PROGRAM IMPLEMENTATION The Valve Inservice Test Program will be executed as part of the normal plant surveillance routine. Three types of tests will be conducted as part of the Valve
4.2 PROGRAM IMPLEMENTATION The Valve Inservice Test Program will be executed as part of the normal plant surveillance routine.
* Test Program:*
Three types of tests will be conducted as part of the Valve Test Program:*
: 1) Valve Operability Tests,
S2PV-5R3
: 2) Valve Leakage Tests and
: 1)
: 3) Safety Valve Tests "The Operability Tests will verify that:
Valve Operability Tests,
: 2)
Valve Leakage Tests and
: 3)
Safety Valve Tests "The Operability Tests will verify that:
: 1) the valve responds to control commands,
: 1) the valve responds to control commands,
: 2) the valve stroke time is within specific limits and
: 2) the valve stroke time is within specific limits and
: 3) remote position indication accurately reflects the observed valve position. Remote valve position indication will be verified every two years.
: 3) remote position indication accurately reflects the observed valve position.
Fail safe valves will be tested by observing the valve operation upon loss of actuating power. In most cases, this can be accomplished using normal control circuits.
Remote valve position indication will be verified every two years.
The follo~ing clarification shall apply to those valves which are scheduled to be exercised during cold shutdown:
Fail safe valves will be tested by observing the valve operation upon loss of actuating power.
                  "Valve testing shall coiilmence not later than 48 hours after reaching cold shutdown and continue until complete or unit is ready to
In most cases, this can be accomplished using normal control circuits.
* S2PV-5R3 return to power. Completion of the valve 4-2 Rev. 3 March 19, 1992
The follo~ing clarification shall apply to those valves which are scheduled to be exercised during cold shutdown:  
* testing is not a prerequisite to return to power. Any testing not completed at*one cold shutdown should be performed during the subsequent scheduled cold shutdowns to meet the code specified testing frequency."
"Valve testing shall coiilmence not later than 48 hours after reaching cold shutdown and continue until complete or unit is ready to return to power.
Completion of the valve 4-2 Rev. 3 March 19, 1992  
 
S2PV-5R3 testing is not a prerequisite to return to power.
Any testing not completed at*one cold shutdown should be performed during the subsequent scheduled cold shutdowns to meet the code specified testing frequency."
Valve Leakage Tests will verify that valves are leak tight in accordance with Appendix J or ASME Section XI.
Valve Leakage Tests will verify that valves are leak tight in accordance with Appendix J or ASME Section XI.
Relief and Safety valves are not required to be leak rate tested (IWV-3512) and are not included as valves to be leak tested.
Relief and Safety valves are not required to be leak rate tested (IWV-3512) and are not included as valves to be leak tested.
Certain valves cannot be full stroke exercised during normal operation following maintenance. These valves are described in the relief requests and cold shutdown justifications. If maintenance cannot be deferred to a shutdown condition, then an engineering evaluation must be performed prior to the maintenance to determine the effect of the maintenance on valve performance. If the evaluation shows that performance will not be affected, then no post mainten*ance testing will be required. A partial stroke test will be performed if possibler To test check vaives to the full open position, the maximum required accident condition flow must be
Certain valves cannot be full stroke exercised during normal operation following maintenance.
* measured through the valve. In certain cases, this flow cannot be practically established or verified.
These valves are described in the relief requests and cold shutdown justifications. If maintenance cannot be deferred to a shutdown condition, then an engineering evaluation must be performed prior to the maintenance to determine the effect of the maintenance on valve performance.
If the evaluation shows that performance will not be affected, then no post mainten*ance testing will be required.
A partial stroke test will be performed if possibler To test check vaives to the full open position, the maximum required accident condition flow must be measured through the valve.
In certain cases, this flow cannot be practically established or verified.
Aqcording to Generic Letter 89-04, disassembly and inspection of the check valves on a sampling basis is an acceptable alternative testing method.
Aqcording to Generic Letter 89-04, disassembly and inspection of the check valves on a sampling basis is an acceptable alternative testing method.
_As described in Generic Letter 89-04, the sample disasse~bly and inspection program involves grouping similar valves and testing one valve in each group during each refueling outage. The sampling technique requires that each valve in the group be the same design (manufacturer, size, model number, and materials of construction) and have the same service conditions including valve orientation. -The group size cannot exceed four valves.
_As described in Generic Letter 89-04, the sample disasse~bly and inspection program involves grouping similar valves and testing one valve in each group during each refueling outage.
Additionally, at each disassembly it must be verified that the disassembled valve is capable of full-stroking and that the internals of the valve are structurally sound. Also, to verify the full stroke capability of the valve, the disk should be manually exercised.
The sampling technique requires that each valve in the group be the same design (manufacturer, size, model number, and materials of construction) and have the same service conditions including valve orientation. -The group size cannot exceed four valves.
A different valve of each group is required to be disassembled, inspected, and manually full stroked exercised at each successive refueling outage, until
Additionally, at each disassembly it must be verified that the disassembled valve is capable of full-stroking and that the internals of the valve are structurally sound.
* the entire group has been tested. If the disassembled valve is not capable of being full stroked exercised or 4-3 S2PV-5R3                                              Rev. 3 March.19, 1992
Also, to verify the full stroke capability of the valve, the disk should be manually exercised.
* 4.3 there is binding or failure of valve internals, the remaining valves in that group must be disassembled, inspected, and manually full stroked exercised during the same outage.
A different valve of each group is required to be disassembled, inspected, and manually full stroked exercised at each successive refueling outage, until the entire group has been tested.
PROGRAM ADMINISTRATION The operations and engineering staffs at Surry Power Station are responsible for administration and execution of the Valve Inservice Test Program. The program was officially implemented on May 1~ 1983 and governs vaive testing for a 120 month period. Prior the to end of the 120 month period, the program will be reviewed and upgraded to assure continued compliance with 10CFR50.55a(g) (4). The program will be updated a minimum of at least once every 40 months or for a new system, relief request, etc.
If the disassembled valve is not capable of being full stroked exercised or 4-3 Rev. 3 March.19, 1992  
4.4  VALVE INSERVICE TEST TABLES The Valve Inservice Test Tables are the essence of the Valve Program to meet ASME Section XI, Subsection IWV requirements.* The tables reflect the positions taken in support of the relief requests~     To aid the reader in the inter*pretation of the tables, brief explanations
 
* of the table headings and-abbreviations are provided .
4.3 4.4 S2PV-5R3 there is binding or failure of valve internals, the remaining valves in that group must be disassembled, inspected, and manually full stroked exercised during the same outage.
PROGRAM ADMINISTRATION The operations and engineering staffs at Surry Power Station are responsible for administration and execution of the Valve Inservice Test Program.
The program was officially implemented on May 1~ 1983 and governs vaive testing for a 120 month period.
Prior the to end of the 120 month period, the program will be reviewed and upgraded to assure continued compliance with 10CFR50.55a(g) (4).
The program will be updated a minimum of at least once every 40 months or for a new system, relief request, etc.
VALVE INSERVICE TEST TABLES The Valve Inservice Test Tables are the essence of the Valve Program to meet ASME Section XI, Subsection IWV requirements.* The tables reflect the positions taken in support of the relief requests~
To aid the reader in the inter*pretation of the tables, brief explanations of the table headings and-abbreviations are provided.
For non-Code valves, a request for relief is not necessary when provisions of the Code cannot be met.
For non-Code valves, a request for relief is not necessary when provisions of the Code cannot be met.
Section 4.7 contains a discussion of the testing requirements for non-Code valves and descriptions of alternative testing in cases where the provisions of
Section 4.7 contains a discussion of the testing requirements for non-Code valves and descriptions of alternative testing in cases where the provisions of  
          *the Code cannot be met.
*the Code cannot be met.
: 1) Valve Number - Each valve in the plant has a unique "tag" number which identifies the system to which the equipment belongs and type of equipment~ *
: 1)
: 2)  Drawing Location - The specific coordinates of each valve are supplied to facilitate location of the valves on the flow diagrams provided.
: 2)
: 3)  Function - A brief description of the function of the valve.
: 3)
: 4)  Code Class - ASME Code Class of each valve as per 10 CFR 50.55a and Regulatory Guide 1.26.
: 4)
NOTE: NC is for non-Code valves. These valves are important to safety but are not in systems that are
Valve Number -
* classified ASME Class 1, 2 or 3 .
Each valve in the plant has a unique "tag" number which identifies the system to which the equipment belongs and type of equipment~
4-4 S2PV-5R3                                              Rev. 3 March 19, 1992
Drawing Location -
The specific coordinates of each valve are supplied to facilitate location of the valves on the flow diagrams provided.
Function -
A brief description of the function of the valve.
Code Class -
ASME Code Class of each valve as per 10 CFR 50.55a and Regulatory Guide 1.26.
NOTE:
NC is for non-Code valves.
These valves are important to safety but are not in systems that are classified ASME Class 1, 2 or 3.
4-4 Rev. 3 March 19, 1992  


**          5) Category - Categories are defined by ASME Section XI, Subsection IWV. Each valve has specific testing requirements which are determined by the category to which it belongs. Valves marked with an "E" are passive valves.
S2PV-5R3
: 6) Size - Nominal pipe diameter to which valve connects is given in inche~.
: 5)
: 7) Valve Type - A brief description of the actuator and valve type.
Category - Categories are defined by ASME Section XI, Subsection IWV.
The following abbreviations are used to describe actuator types. Valves may be actuated in more than one way.
Each valve has specific testing requirements which are determined by the category to which it belongs.
MO - Motor Operated AO - Pneumatic (Air Operated)
Valves marked with an "E" are passive valves.
MAN - Manually Operated so - Electronic s9lenoid Operated Valves
: 6)
: 8) Isolation Valve Type - Valves that are assigned a maximum leakage. The following abbreviations are used to describe the isolation valve types:
Size -
* CIV - Containment Isolation Valve subject to Appendix J. leakage testing.
Nominal pipe diameter to which valve connects is given in inche~.
: 7)
Valve Type -
A brief description of the actuator and valve type.
The following abbreviations are used to describe actuator types.
Valves may be actuated in more than one way.
MO  
- Motor Operated AO Pneumatic (Air Operated)
MAN - Manually Operated so  
- Electronic s9lenoid Operated Valves
: 8)
Isolation Valve Type - Valves that are assigned a maximum leakage.
The following abbreviations are used to describe the isolation valve types:
CIV -
Containment Isolation Valve subject to Appendix J. leakage testing.
PIV - Pressure Isolation Valve *which protects low pressure safety related piping from RCS pressure.
PIV - Pressure Isolation Valve *which protects low pressure safety related piping from RCS pressure.
Technical Specification Section 3.1.C specifies the pressure isolation valves that are tested in accordance with this program.
Technical Specification Section 3.1.C specifies the pressure isolation valves that are tested in accordance with this program.
: 9) Test Position - The following abbreviations are used to describe normal valve positions to which the valves are tested (including the valve safety position):
: 9)
o - Open C - Closed oc - Open and Closed
Test Position - The following abbreviations are used to describe normal valve positions to which the valves are tested (including the valve safety position):
o -
Open C -
Closed oc -
Open and Closed
: 10) Test Required - Testing r~quirementi identified for the valves are identified here.
: 10) Test Required - Testing r~quirementi identified for the valves are identified here.
ST - *stroke times shall be measured per Section XI, Subsubarticle IWV-3410 or as modified by a specific relief request.                                   **
ST - *stroke times shall be measured per Section XI, Subsubarticle IWV-3410 or as modified by a specific relief request.
* S2PV-5R3 4-5 Rev. 3 March 19, 1992
4-5 Rev. 3 March 19, 1992  
* EV - Exercise valve for operability at least once every 3 months per Section XI, Subsubarticle IWV-3410* or as modified by a specific relief request or cold shutdown justification.
 
LT - Leak test shall be performed per Section XI~
S2PV-5R3 EV -
Exercise valve for operability at least once every 3 months per Section XI, Subsubarticle IWV-3410* or as modified by a specific relief request or cold shutdown justification.
LT -
Leak test shall be performed per Section XI~
Subsubarticle IWV-3420 or as modified by specific relief request.
Subsubarticle IWV-3420 or as modified by specific relief request.
CV - Check valves shall be exercised at least once every 3 months per section XI, Subsubarticle IWV-3520 or as modified by a specific relief request or cold shutdown justification.
CV -
VP - Valve position indication shall be verified per Section XI, Subsubarticle IWV-3300 or as modified by a specific relief request.
Check valves shall be exercised at least once every 3 months per section XI, Subsubarticle IWV-3520 or as modified by a specific relief request or cold shutdown justification.
SP - Set points of safety and relief valves shall be tested per Section IX, Subsubarticle IWV-3510 or as modified by a specific relief request.
VP -
FS - Valves with fail-safe actuators shall be tested by observing the operation of the valves
Valve position indication shall be verified per Section XI, Subsubarticle IWV-3300 or as modified by a specific relief request.
* upon loss of the actuator power at least once every 3 months per Section XI, Subsubarticle IWV-3415 or as modified by a specific relief request or cold shutdown justification .
SP -
* S2PV-5R3 4-6 Rev. 3 March 19; 1992
Set points of safety and relief valves shall be tested per Section IX, Subsubarticle IWV-3510 or as modified by a specific relief request.
FS - Valves with fail-safe actuators shall be tested by observing the operation of the valves upon loss of the actuator power at least once every 3 months per Section XI, Subsubarticle IWV-3415 or as modified by a specific relief request or cold shutdown justification.
4-6 Rev. 3 March 19; 1992  
 
VALVE NUMBER 2-BD-TV-200A 2-BD-TV-200B 2-BD-TV-200C 2-BD-TV-200D 2-BD-TV-200E 2-BD-TV-200F VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-124A 1 OF 4 C-7 AO GATE "A" STEAM GENERATOR BLOWDOWN, OUTSIDE CON-TAINMENT ISOLATION VALVE 11548~CBM-124A 1 OF 4 C-6 AO GATE "A" STEAM GENERATOR BLOWDOWN, INSIDE CON-TAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 C-7 AO GATE "B" STEAM GENERATOR BLOWDOIJN, OUTSIDE CON-TAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 C-6 AO GATE 11811 STEAM GENERATOR SLOWDOWN, INSIDE CON-TAINMENT ISOLATION VALVE 11548-CBM-124A 3 OF 4 C-7 AO GATE 11C11 STEAM GENERATOR BLOWDOIJN, OUTSIDE CON-TAINMENT ISOLATION VALVE 11548*CBM-124A 3 OF 4
* C-6 AO GATE "C" STEAM GENERATOR BLOWDOIJN, INSIDE CON*
TAINMENT ISOLATION VALVE VALVE.
ASME SIZE CLASS CAt 3.00 2
B 3.00 2
B 3.00 2
B 3.00 2
B 3.00 2
B 3.00 2
B TEST POS C
C C
C C
C ISO VALVE TYPE TEST TYPE EV FS ST VP EV FS ST VP EV FS ST VP EV FS ST VP EV FS ST VP EV FS ST VP PAGE:
1 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-34 34 34 34 34 34 COLD SHUT csv-21 21 21 21 21 21 21 21 21 21 21 21 NC ALT TEST VNC*
 
VALVE NUMBER 1-CC-569 1 *CC-578 2-cc-001 2-CC-058 VIRGINIA POl,/ER.COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL
*1NSERVICE TESTING PROGRAM - VALVE TABLE DRA\\JING SHEET DR\\JG VALVE NUMBER NUMBER COOR TYPE 11448-CBM-OnD 1 OF 5 B-5 CHECK VALVE 11011 COMPONENT COOLING PUMP DISCHARGE CHECK VALVE 11448-CBM-072D.* 1 OF 5 B-5 CHECK VALVE 11C" COMPONENT COOLING PUMP DISCHARGE CHECK VALVE 11548-CBM-072A 2 OF 7 F-7 CHECK VALVE CC SUPPLY TO "A" RC PUMP LO, STATOR SHROUD &
THERM BARRIER COOLERS, ISOL CHECK VLV 11548-CBM-072A 3 OF 7 F-7 CHECK VALVE CC SUPPLY TO 11811 RC PUMP LO, STATOR SHROUD &
THERM BARRIER COOLERS, ISOL CHECK VLV VALVE ASME SIZE CLASS CAT 18.00 3
C 18.00 3
C 6.00' 3 C
6.00 3
C ISO TEST VALVE TEST PCS TYPE TYPE oc CV oc CV C
CV C
CV PAGE:
2 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-
. csv-VNC-6 6
2-CC-059 2-CC-094 2-CC-095 11548-CBM-072A 4 OF 7 F-7 CHECK VALVE CC SUPPLY TO 11C11 RC PUMP LO, STATOR SHROUD &
THERM BARRIER COOLERS, !SOL CHECK VLV 11548-CBM-072A*
2 OF 7 C-6 CHECK VALVE COMPONENT COOLING \\JATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-072A 3 OF 7 C-6 CHECK VALVE COMPONENT COOLING \\JATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 2.0. 3 2.0 3
C C
CV 6
C C
CV 45 C
C CV 45
------------------------------------------------------------------------------------------------ *----------------~--------
2-CC-176 2-CC-177 11548-CBM-072A 1 OF 7 F-7 CHECK VALVE CC SUPPLY TO RHR HEAT EXCHANGER CHECK VALVE 11548-CBM-072A 1 OF 7 F-7 CHECK VALVE CC SUPPLY TO RHR HEAT EXCHANGER CHECK VALVE 18.00 3
C 18.00 3
C oc CV 5
oc CV 5
2-CC-181 2-CC-185 11548-CBM-072A 1 OF 7. E-2 MANUAL BFLY CC RETURN FROM RHR HEAT EXCHANGER MANUAL ISOLATION VALVE 11548-CBM-072A 1 OF 7 C-2 MANUAL BFLY CC RETURN FROM RHR HEAT EXCHANGER MANUAL ISOLATION VALVE 18.00 3
18.00 3
B oc EV 26 B
oc EV 26
.2-CC-224
'11548-CBM-0728 1 OF 3 D-2 CHECK VALVE CC SUPPLY TO 11C11 RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT ISOLATION CHECK VALVE 6.00 3
C C
CV 5


VIRGINIA POIJER COMPANY                        PAGE:    1 OF 63
* SURRY UNIT 2                                REVISION: 03 SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL  COLD ALT VALVE        DRAWING            SHEET DRWG VALVE                VALVE . ASME      TEST VALVE TEST REQ  SHUT TEST NUMBER      NUMBER              NUMBER COOR TYPE                SIZE      CLASS CAt  POS  TYPE  TYPE v-  csv- VNC*
2-BD-TV-200A 11548-CBM-124A      1 OF 4 C-7      AO GATE            3.00  2    B    C          EV        21 FS        21 ST  34 VP "A" STEAM GENERATOR BLOWDOWN, OUTSIDE CON-TAINMENT ISOLATION VALVE 2-BD-TV-200B 11548~CBM-124A      1 OF 4 C-6      AO GATE            3.00  2    B    C          EV        21 FS        21 ST  34 VP "A" STEAM GENERATOR BLOWDOWN, INSIDE CON-TAINMENT ISOLATION VALVE 2-BD-TV-200C 11548-CBM-124A      2 OF 4 C-7      AO GATE            3.00  2    B    C          EV        21 FS        21 ST  34 VP "B" STEAM GENERATOR BLOWDOIJN, OUTSIDE CON-TAINMENT ISOLATION VALVE 2-BD-TV-200D 11548-CBM-124A      2 OF 4 C-6      AO GATE            3.00  2    B    C          EV        21
* FS        21 ST  34 VP 11 811 STEAM GENERATOR SLOWDOWN, INSIDE CON-TAINMENT ISOLATION VALVE 2-BD-TV-200E 11548-CBM-124A      3 OF 4 C-7      AO GATE            3.00  2    B    C          EV        21 FS        21 ST  34 VP 11 C11 STEAM GENERATOR BLOWDOIJN, OUTSIDE CON-TAINMENT ISOLATION VALVE 2-BD-TV-200F 11548*CBM-124A      3 OF 4
* C-6    AO GATE            3.00  2    B    C          EV        21 FS        21 ST  34 VP "C" STEAM GENERATOR BLOWDOIJN, INSIDE CON*
TAINMENT ISOLATION VALVE
* VIRGINIA POl,/ER .COMPANY                        PAGE:    2 OF 63
* SURRY UNIT 2                                REVISION: 03 SECOND INSPECTION INTERVAL                        DATE: 3/19/92
                                                    *1NSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL COLD ALT VALVE              DRA\JING            SHEET DR\JG VALVE              VALVE      ASME      TEST VALVE TEST REQ SHUT TEST NUMBER            NUMBER              NUMBER COOR TYPE              SIZE        CLASS CAT PCS TYPE TYPE  v- . csv- VNC-
                                                                                                              --- ----
1-CC-569          11448-CBM-OnD      1 OF 5 B-5    CHECK VALVE      18.00      3    C  oc        CV
                      ---------------------------------------------
11 011 COMPONENT COOLING PUMP DISCHARGE CHECK VALVE 1*CC-578          11448-CBM-072D .* 1 OF 5 B-5      CHECK VALVE      18.00      3    C  oc        CV
                      ---*
11
                            -----------------------------------------
C" COMPONENT COOLING PUMP DISCHARGE CHECK VALVE 2-cc-001          11548-CBM-072A      2 OF 7 F-7    CHECK VALVE        6.00' 3      C  C          CV        6 CC SUPPLY TO "A" RC PUMP LO, STATOR SHROUD &
THERM BARRIER COOLERS, ISOL CHECK VLV 2-CC-058          11548-CBM-072A      3 OF 7 F-7    CHECK VALVE        6.00    3    C  C          CV        6 CC SUPPLY TO 11 811 RC PUMP LO, STATOR SHROUD &
        .
THERM BARRIER.
COOLERS, ISOL CHECK VLV
  --------------------------------------------------------------------------------------------------------------------------
2-CC-059          11548-CBM-072A 4 OF 7 F-7 CHECK VALVE                                C  C          CV        6 CC SUPPLY TO 11 C11 RC PUMP LO, STATOR SHROUD &
THERM BARRIER COOLERS, !SOL CHECK VLV
* 2-CC-094          11548-CBM-072A*    2 OF 7 C-6    CHECK VALVE        2.0 . 3      C  C          CV  45 COMPONENT COOLING \JATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 2-CC-095          11548-CBM-072A      3 OF 7 C-6    CHECK VALVE        2.0    3    C  C          CV  45 COMPONENT COOLING \JATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE
  ------------------------------------------------------------------------------------------------ *----------------~--------
2-CC-176          11548-CBM-072A      1 OF 7 F-7    CHECK VALVE      18.00      3    C  oc        CV        5 CC SUPPLY TO RHR HEAT EXCHANGER CHECK VALVE 2-CC-177          11548-CBM-072A      1 OF 7 F-7    CHECK VALVE      18.00      3    C  oc        CV        5 CC SUPPLY TO RHR HEAT EXCHANGER CHECK VALVE
  -----------------------------------------------------------------------------------------------------------------------*--
2-CC-181          11548-CBM-072A      1 OF 7. E-2    MANUAL BFLY      18.00      3    B  oc        EV        26 CC RETURN FROM RHR HEAT EXCHANGER MANUAL ISOLATION VALVE 2-CC-185          11548-CBM-072A      1 OF 7 C-2    MANUAL BFLY      18.00      3    B  oc        EV        26 CC RETURN FROM RHR HEAT EXCHANGER MANUAL ISOLATION VALVE
  **-------*-------------------------------*---------------. -------------------------------------------------*--------------
  .2-CC-224        '11548-CBM-0728      1 OF 3 D-2    CHECK VALVE        6.00    3    C  C          CV        5 CC SUPPLY TO 11 C11 RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT ISOLATION CHECK VALVE
* VIRGINIA POWER COMPANY                            PAGE:    3 OF 63 SURRY UNIT 2                                  REVISION: 03
* SECOND INSPECTION INTERVAL                          DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL  COLD ALT VALVE.            DRAIJING            SHEET DRIJG VALVE            VALVE    ASHE      TEST VALVE TEST    REQ  SHUT TEST NUMBER            NUMBER              NUMBER COOR TYPE              SIZE    CLASS CAT PCS TYPE TYPE        v-    csv- VNC-2-CC-233          11548-CBM-0728      1 OF 3 D-6    CHECK VALVE      6.00  3    C    C          CV            5
                      ---------------------*-----------------------
CC SUPPLY TO 8 RECIRC AIR COOLING COILS, 11 11 ClJTSIDE CONTAINMENT ISOLATION CHECK VALVE
    ---------------* ----------------------------------------------- .----------------------------------------------------------
2-CC-242          11548-CBM-0728      1 OF 3 D-8    CHECK VALVE      6.00  3    C    C          CV            5 CC SUPPLY TO "A"RECIRC AIR COOLING COILS, ClJTSIDE CONTAINMENT ISOLATION CHECK VALVE 2-CC-329          11548-CBM-0718      2 OF 2 D-3    CHECK VALVE      2.00  3    C    oc          CV CHARGING PUMP COOLING IJATER PUMP DISCHARGE CHECK VALVE 2-CC-555          11548-CBM-072A      2 OF 7 C-6    CHECK.VALVE      2.0    3    C    C          CV      45 COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 2-CC-556          11548-CBM-072A      3 OF 7 C-6    CHECK VALVE      2.0    3    C    C          CV      45 COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE
    ---------------------------------------------------------------------------------- -------------------------------* --------
2-CC-557          11548-CBM-072A      4 OF 7 C-6    CHECK VALVE      2.0    3    C    C          CV      45
* 2-CC-592 COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-072A      4 OF 7 C-6    CHECK VALVE
                      ----------- ----*-----------------------------
COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 2.0    3    C    C          CV      45 2-CC-764          11548-CBM-0718      2 OF 2 C-7    CHECK VALVE      2.00  3    C    oc          CV CHARGING PUMP COOLING IJATER PUMP DISCHARGE CHECK VALVE                                                                                              -
    ------------------------------------------------------------------------------------------.-------------------------------
2-CC-806          11448-CBMo072E 1 OF 2 C-5 CHECK VALVE              1.00 3      C    0          CV            30 CHARGING PUMP SEAL COOLING SURGE TANK MAKEUP CHECK VALVE 2-CC*LCV-201      11548-CBM-0718      2 OF 2 D-5    AO GATE          1.00  3    B    oc          EV            31 FS            31 ST      47 CHARGING PUMP SEAL COOLING SURGE TANK LEVEL CONTROL/ISOLATION VALVE 2*CC*RV-212A      11548-CBM-0728      1 OF 3 C-7    RELIEF VALVE      0.75  3    C    0          SP REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE
                                                                                                                    -
    --------------------------------------------------------------------------------------------------------------------------
                .
*
(
(
VALVE.
NUMBER 2-CC-233 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAIJING SHEET DRIJG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-0728 1 OF 3 D-6 CHECK VALVE 6.00 3
C CC SUPPLY TO 11811 RECIRC AIR COOLING COILS, ClJTSIDE CONTAINMENT ISOLATION CHECK VALVE ISO TEST VALVE TEST PCS TYPE TYPE C
CV PAGE:
3 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-5 2-CC-242 2-CC-329 2-CC-555 2-CC-556 11548-CBM-0728 1 OF 3 D-8 CHECK VALVE CC SUPPLY TO "A"RECIRC AIR COOLING COILS, ClJTSIDE CONTAINMENT ISOLATION CHECK VALVE 11548-CBM-0718 2 OF 2 D-3 CHECK VALVE CHARGING PUMP COOLING IJATER PUMP DISCHARGE CHECK VALVE 11548-CBM-072A 2 OF 7 C-6 CHECK.VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-072A 3 OF 7 C-6 CHECK VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 6.00 3
C 2.00 3
C 2.0 3
C 2.0 3
C C
CV 5
oc CV C
CV 45 C
CV 45 2-CC-557 2-CC-592 2-CC-764 11548-CBM-072A 4 OF 7 C-6 CHECK VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-072A 4 OF 7 C-6 CHECK VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-0718 2 OF 2 C-7 CHECK VALVE CHARGING PUMP COOLING IJATER PUMP DISCHARGE CHECK VALVE 2.0 3
2.0 3
2.00 3
C C
CV 45 C
C CV 45 C
oc CV 2-CC-806 2-CC*LCV-201 2*CC*RV-212A 11448-CBMo072E 1 OF 2 C-5 CHECK VALVE CHARGING PUMP SEAL COOLING SURGE TANK MAKEUP CHECK VALVE 11548-CBM-0718 2 OF 2 D-5 AO GATE CHARGING PUMP SEAL COOLING SURGE TANK LEVEL CONTROL/ISOLATION VALVE 11548-CBM-0728 1 OF 3 C-7 RELIEF VALVE REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 1.00 3
1.00 3
0.75 3
C 0
B oc C
0 CV EV FS ST SP 47 30 31 31


VIRGINIA POIJER COMPANY                                     PAGE:    4 OF 63 SURRY UNIT 2                                           REVISION: 03
VALVE NUMBER 2-CC*RV-2128 2-CC*RV-212C 2-CC*RV-219A 2-CC*RV-219B 2-CC*RV-224 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE.
* SECOND INSPECTION INTERVAL                                     DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE.
ISO DRAWING SHEET DRWG NUMBER NUMBER COOR VALVE TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-Ons 1 OF 3 c-s RELIEF VALVE REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 11548-CBM-OnB 1 OF 3 C-3 RELIEF VALVE REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 11548-CBM-OnA 1 OF 7 E-3 RELIEF VALVE 11A11 RHR HEAT EXCHANGER COMPONENT COOLING RELIEF VALVE 11548-CBM-OnA 1 OF 7 0-3 RELIEF VALVE 11811 RHR HEAT EXCHANGER COMPONENT COOLING RELIEF VALVE 11548-CBM-OnA 5 OF 7 F-6 RELIEF VALVE COMPONENT COOLING PIPING RELIEF o_.75 3
NC ISO     REL COLD ALT VALVE            DRAWING             SHEET   DRWG VALVE                 VALVE         ASME           TEST VALVE TEST REQ SHUT TEST NUMBER          NUMBER              NUMBER  COOR TYPE                  SIZE          CLASS CAT     POS TYPE TYPE   V-  CSV- VNC-2-CC*RV-2128    11548-CBM-Ons       1 OF 3 c-s   RELIEF VALVE           o_.75      3      C      0          SP
C 0
                  ---------------------------------------------
SP 0.75 3
REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 2-CC*RV-212C    11548-CBM-OnB       1 OF 3 C-3     RELIEF VALVE           0.75      3      C      0          SP REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 2-CC*RV-219A    11548-CBM-OnA       1 OF 7 E-3     RELIEF VALVE           1.50      3      C      0          SP 11A11 RHR HEAT EXCHANGER COMPONENT COOLING RELIEF VALVE 2-CC*RV-219B    11548-CBM-OnA       1 OF 7 0-3     RELIEF VALVE           1.50      3      C      0          SP 11 811 RHR HEAT EXCHANGER COMPONENT COOLING RELIEF VALVE 2-CC*RV-224      11548-CBM-OnA       5 OF 7 F-6     RELIEF VALVE           0.75       3       C     0           SP COMPONENT COOLING PIPING RELIEF
C 0
  ---------------------------------------------------------------------------------------------------. -------------------~--
SP 1.50 3
2-CC-RV-238A     11548-CBM-OnA       2 OF 7 F-6   RELIEF VALVE           0.75      3      C      0          SP
C 0
* 2-CC*RV-238B REACTOR SHROULD COOLING COIL RELIEF VALVE 11548-CBM*OnA       3 OF 7 REACTOR SHROULD COOLING COIL RELIEF VALVE F-6    RELIEF VALVE            0.75      3      C      0          SP 2-CC-RV-238C    11548*CBM-072A     4 OF 7 F-6   RELIEF VALVE           0.75      3      C      0          SP REACTOR SHROULD COOLING COIL RELIEF_ VALVE.
SP 1.50 3
  --------------------------------------------------------------------------------------------------------------------------
C 0
                                                        .                                   .
SP 0.75 3
2-CC*RV-250     11548-CBM-OnA       1 OF 7 E-7     RELIEF.VALVE                       3      C      0          SP CC RETURN HEADER RELIEF VALVE 2*CC*TV-205A    11548-CBM*OnA       2 OF 7 B-4     AO BALL                 6.00      3      B      C          EV      6 FS      6 ST VP CC RETURN FROM "A" RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VAL-VE 2*CC*TV-205B    11548-CBM-OnA       3 OF 7 B-4   AO BALL                 6.00      3      B      C          EV      6 FS      6 ST VP CC RETURN FROM 11 811 RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VALVE
C 0
*                                                                  -- - -- -------- ---- -
SP PAGE:
                                                            - ---~-- -- - - - - -- - ----- ----- ------ --- ------
4 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-
---------------------------------------------------------------------------------------------------. -------------------~--
2-CC-RV-238A 2-CC*RV-238B 2-CC-RV-238C 11548-CBM-OnA 2 OF 7 F-6 RELIEF VALVE REACTOR SHROULD COOLING COIL RELIEF VALVE 11548-CBM*OnA 3 OF 7 F-6 RELIEF VALVE REACTOR SHROULD COOLING COIL RELIEF VALVE 11548*CBM-072A 4 OF 7 F-6 RELIEF VALVE REACTOR SHROULD COOLING COIL RELIEF_ VALVE.
0.75 3
0.75 3
0.75 3
C 0
SP C
0 SP C
0 SP 2-CC*RV-250 2*CC*TV-205A 2*CC*TV-205B 11548-CBM-OnA 1 OF 7 E-7 RELIEF.VALVE CC RETURN HEADER RELIEF VALVE 11548-CBM*OnA 2 OF 7 B-4 AO BALL CC RETURN FROM "A" RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VAL-VE 11548-CBM-OnA 3 OF 7 B-4 AO BALL CC RETURN FROM 11811 RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VALVE 3
6.00 3
6.00 3
C B
B
- ---~-- -- ---- -- - ----- ----- ------
0 C
C SP EV FS ST VP EV FS ST VP 6
6 6
6


VIRGINIA POWER COMPANY                               PAGE:    5 *OF 63 SURRY UNIT 2                                     REVISION: 03
VALVE NUMBER 2*CC*TV*205C DRAWING SHEET NUMBER NUMBER 11548*CBM*072A 4 OF 7 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT B-4 AO BALL 6.00 3
* SECOND INSPECTION INTERVAL                             DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL  COLD ALT VALVE             DRAWING            SHEET DRWG VALVE              VALVE    ASHE         TEST  VALVE  TEST    REQ  SHUT TEST NUMBER            NUMBER            NUMBER COOR TYPE             SIZE     CLASS CAT   POS  TYPE  TYPE    v-   csv- VNC*
B CC RETURN FROM "C" RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C
                                                                                                                            ----
EV FS ST VP PAGE:
2*CC*TV*205C      11548*CBM*072A    4 OF 7 B-4    AO BALL          6.00  3      B    C            EV          6 FS          6 ST VP CC RETURN FROM "C" RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VALVE
5 *OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*
  -------------------.
6 6
Z*CC*TV-207
Z*CC*TV-207 11548*CBM*072A 1 OF 7 D-7 AO.GLOBE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIERS, OUTSIDE CONTAINMENT ISOLATION VALVE 2.50 3
                        ---------------- --------------------------------------------------------------------------------------
B C
11548*CBM*072A 1 OF 7 D-7 AO.GLOBE                2.50 3         B   C           EV           27 FS           27 ST     34 VP
EV FS ST VP 34 27 27 2*CC*TV*209A 11548*CBM*072A 1 OF 7 B-7 AO BFLY CC RETURN FROM 11A" RHR HEAT EXCHANGER, OUT*
                    --------------------------------- *-----------
SIDE CONTAINMENT ISOLATION VALVE 18.00 3
CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIERS, OUTSIDE CONTAINMENT ISOLATION VALVE
B oc EV FS ST VP 2*CC*TV*209B 2*CC*TV*210A 2*CC*TV*210B 11548-CBM*O?ZA 1 OF 7 C-7 AO BFLY 18.00 3
  ----------------------------------------------------------------------------------*    --------------------------------* ------
CC RETURN FROM "B" RHR HEAT EXCHANGER, OUT*
2*CC*TV*209A      11548*CBM*072A 1 OF 7 B-7 AO BFLY                18.00    3      B    oc          EV FS ST VP CC RETURN FROM 11 A" RHR HEAT EXCHANGER, OUT*
SIDE CONTAINMENT ISOLATION VALVE 11548*CBM*072B 1 OF 3 E-7 AO BFLY CC RETURN FROM "A" RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*072B 1 OF 3 E*S AO BFLY CC RETURN FROM "B" RECIRC AIR COOLING COILS,.
SIDE CONTAINMENT ISOLATION VALVE
OUTSIDE CONTAINMENT ISOLATION VALVE 6.00 3
  -----.---------------------------*
6.00 3
2*CC*TV*209B
B OC B
                                      -----------------------------------------------------------------------------------------
C B
11548-CBM*O?ZA 1 OF 7 C-7 AO BFLY                18.00 3        B    OC          EV FS *
C EV FS
* ST VP CC RETURN FROM "B" RHR HEAT EXCHANGER, OUT*
* ST VP EV FS ST VP EV FS ST VP 2*CC*TV*210C 11548*CBM*072B 1 OF 3 E-4 AO BFLY CC RETURN FROM "C" RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT iSOLATION VALVE 6.00 3
SIDE CONTAINMENT ISOLATION VALVE 2*CC*TV*210A      11548*CBM*072B    1 OF 3 E-7    AO BFLY          6.00  3      B    C            EV FS ST VP CC RETURN FROM "A" RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CC*TV*210B      11548*CBM*072B    1 OF 3 E*S    AO BFLY          6.00  3      B    C            EV FS ST VP CC RETURN FROM "B" RECIRC AIR COOLING COILS,.
B C
                  .
EV FS ST VP
OUTSIDE CONTAINMENT ISOLATION VALVE                                      .                                .
----------------.-----------------------------------------------------------------~ ------------------------* --------------
  --------------------------------------------------------------------
2*CC*TV*210C      11548*CBM*072B 1 OF 3 E-4 AO BFLY
                                                                          ------------------------------------------------------
6.00 3        B    C            EV FS ST VP
                    -----* ---------------------------------------
CC RETURN FROM "C" RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT iSOLATION VALVE
  ---------------- .-----------------------------------------------------------------~ ------------------------* --------------
* VIRGINIA PO'JER COMPANY                        PAGE:    6 OF 63
* SURRY UNIT 2                                REVISION: 03 SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL COLD ALT VALVE        DRAWING          SHEET  DRWG VALVE            VALVE    ASME      TEST VALVE TEST REQ SHUT TEST NUMBER      NUMBER          NUMBER  COOR TYPE            SIZE      CLASS CAT  POS TYPE  TYPE V-  CSV- VNC-2-CC-TV-220A 11548-CBM-072A  2 OF 7 C-5    AO GATE            1.50  3    B    C          EV        27 ST VP CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE 2-CC-TV-220B 11548-CBM-072A  3 OF 7 C-5    AO GATE            1.50  3    B    C          EV        27 ST VP CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE 2-CC-TV-220C 11548-CBM-072A  4 OF 7 C-5    AO GATE            1.50  3    B    C          EV        27 ST VP CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE
*
* VIRGINIA POWER COMPANY                                PAGE:    7 OF 63 SURRY UNIT 2                                      REVISION: 03
* SECOND INSPECTION INTERVAL .                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING              SHEET DRWG VALVE                VALVE
* ASME        TEST  VALVE  TEST    REQ SHUT TEST NUMBER            NUMBER              NUMBER COOR TYPE                SIZE    CLASS CAT  POS  TYPE  TYPE
__ ;. _ v- csv- VNC-1-CH-109          11448-CBM-OBBA      1 OF 4 C-5    CHECK VALVE
                    ---------------------------------------------
2.00  2      C    0            CV                        l 11 C BORIC ACID TRANSFER PUMP DISCHARGE CHECK 11 VALVE 1-CH-116          11448*CBM-088A      1 OF 4 C-4    CHECK VALVE        -~-DO  2
* C    0            CV 11 011 BORIC ACID TRANSFER PUMP DISCHARGE CHECK VALVE 2-CH-225          11548-CBM-0888      1 OF 2 D-3    CHECK VALVE        1.0    2      C    0            CV          19 MANUAL EMERGENCY BORATION PATH CHECK VALVE 2-CH-227          11548-CBM-0888      1 OF 2 B-5    CHECK VALVE        2.00  2      C    0            CV          19 MAIN EMERGENCY BORATION LINE TO CHARGING PUMP SUCTION CHECK VALVE
  --------------------*------------------------------------------
2-CH-228          11548-CBM-0888 1 OF 2 B-4 MANUAL GATE
                                                                      *-----------------------------------------------------------
1.0    2      B    0            EV          19 MANUAL EMERGENCY BORATION PATH MANUAL VALVE 2-CH-229          11548-CBM-0888      1 OF 2 B-4    CHECK VALVE                                        CV          19
* 1.0    2      C    0 MANUAL EMERGENCY BORATION PATH CHECK VALVE 2-CH-230          11548-CBM-0888      1 OF 3 C-6    CHECK VALVE        4.00  2      C    0            CV CHARGING PUMP *suPPLY FROM VOLUME CONTROL TANK DISCHARGE CHECK VALVE
  ------------------------------------------------------------------*-------------------------------------*------------------
2-CH-256          11548-CBM-0888      2 OF 2 D-7    CHECK VALVE        2.00  2      C    0            CV 11 A11 CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE 2-CH-258          11548-CBM-0888      2 OF 2 D-7    CHECK VALVE        3.00  2      C    oc          CV      14 11 A CHARGING PUMP DISCHARGE CHECK VALVE 11 2*CH-265          11548-CBM-0888      2 OF 2 D-6    CHECK VALVE        2.00  2      C    0            CV 8 CHARGING PUMP DISCHARGE RECIRC LINE CHECK 11 11 VALVE
  -------~------- *-------------------------------*
2-CH-267
                                                      -----------------------------------
11548-CBM-0888 2 OF 2 0*6 CHECK VALVE                  3.00. 2
                                                                                            ---------------------------------------
oc          CV C                        14 11 811 CHAR.GING PUMP DISCHARGE CHECK VALVE
  ---------------------*-----------------------~---------
2-CH-274          11548-CBM-0888 2 OF 2 D-4 CHECK VALVE
                                                              .-------------------------------------------------------------------
2.00 2        C    0.          CV                        I "C" CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE
* VIRGINIA PO'.IER COMPANY                            PAGE:    8 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL COLD ALT VALVE            DRA\IING          SHEET  DR\IG VALVE            VALVE      ASME      TEST VALVE TEST      REQ SHUT TEST NUMBER          NUMBER            NUMBER  COOR TYPE              SIZE      CLASS CAT POS TYPE TYPE        V-  CSV- VNC-2-CH-276        11548-CBM-0888    2 OF 2 D-4    CHECIC VALVE        3.00  2    C  OC          CV      14
                  ---------------------------------------------
11 C CHARGING PUMP DISCHARGE CHECIC VALVE 11 2-CH-309        11548-CBM*OSSC
* 1 OF 2 D-4      CHECIC VALVE        3.00  2    AC  C    CIV    CV          20 LT MAIN CHARGING SUPPLY HEADER, INSIDE CONTAIN*
MENT ISOLATION CHECIC VALVE 2-CH*FCV-2113A  11548-CBM-OSSB    1 OF 2 C-3    AO GLOBE            ,.o    2    B  0            EV FS ST VP MANUAL EMERGENCY BORATION PATH FLOIJ CONTROL VALVE
  ----------------------------------------------------------------*----------------------------------------------------------
2-CH-FCV*2113B  11548-CBM-OSSB    1 OF 3 b-5    AO GATE              2.00  2    B  C            EV FS ST VP MAKEUP TO CHARGING PUMP SUCTION LINE ISOLATION VALVE
* 2*CH*FCV*2114A  11548-CBM*OSSB    1 OF 2 D-4    AO GLOBE
                  ---------------------------------------~-----
PRIMARY GRADE \IATER SUPPLY TO BORIC ACID BLENDER ISOLATION VALVE 2.0    2    B  C            EV FS ST VP 2-CH*FCV-2114B  11548-CBM-OSSB    1 OF 3 0-5    AO GATE              2.00  2    B  C            EV FS ST VP PRIMARY GRADE \IATER TO VCT LINE ISOLATION VALVE 2-CH*FCV-2160    11548-CBM*OSSC    1 OF 2 B-4    AO GLOBE            2.00        AE  C    CIV    LT VP CHARGING FLO\I CONTROL TO LOOP FILL HEADER, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CH*LCV*2115B  11548-CBM-OSSB    2 OF 2 B*8    MO GATE              8.00  2    B  oc          EV ST VP CHARGING PUMP SUPPLY ISOLATION VALVE FROM REFUELING \IATER STORAGE TANK
  ----------------------------- .------------- *------------------------------.------------------------------------------------
* VIRGINIA PO\JER COMPANY                            PAGE:    9 OF 63
* SURRY UNIT 2                                  REVISION: 03 SECOND INSPECTION INTERVAL                          DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO          REL COLD ALT VALVE              DRAWING            SHE.ET . DRWG VALVE            VALVE    ASHE      TEST VALVE TEST    REC SHUT TEST NUMBER            NUMBER            NUMBER COOR TYPE                SIZE      CLASS CAT POS
* TYPE TYPE    V*  CSV* VNC*
2*CH*LCV-2115C    11548*CBM*088B    1 OF 2 C-6      MO GATE            4.00  2    B  C          EV            11 ST VP CHARGING PUMP SUPPLY ISOLATION FROM VOLUME CONTROL TANK
  ---------------------------------------------------------------------------------------------------------
                                                        '                            '
                                                                                                              *----------------
2*CH*LCV-2115D    11548*CBM-088B    2 OF. 2 C-8    MO GATE            8.00 - 2    B  oc        EV ST VP
                    -------------------------------*-------------
CHARGING PUMP SUPPLY ISOLATION VALVE FROM REFUELING WATER STORAGE TANK 2*CH*LCV*2115E    11548*CBM*088B    1 OF 2 C-6      MO GATE            4.00  2    B  C          EV            11 ST VP
                    ------------------------------------ *--------
CHARGING PUMP SUPPLY ISOLATION VALVE, FROM VOLUME CONTROL TANK
  ----------------.------------- .----------------------------------------------------*----------------------------------------
2-CH*LCV-2460A    11548*CBM-088C      OF 2 F-7      AO GLOBE          2.00        B  C          EV            15 FS          15 ST VP
*
                    ------ ------- --------------- -----------------
NORMAL LETDOWN TO REGENERAHVE HEAT EXCHANGER ISOLATION VALVE
  --------------- -- .-----------------------------------------------------------------------------------------------*----------
2*CH*LCV*2460B , 11548*CBH*088C      1 OF 2 F-7      AO GLOBE          2.00        B  C          EV            15 FS          15 ST VP NOR~L LETDOWN TO REGENERATIVE HEAT EXCHANGE.R ISOLATION VALVE 2*CH*HOV-2267A    11548*CBH*088B    2 OF 3 C-7      HO GATE            6.00  2    B  oc        EV ST VP
                  .
                    ---------------------------------------------
                                                  '
CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP 2*CH*MOV*2267B    1154S*CBM-088B    2 OF 3 B-7      MO GATE            6.00  2    E  0          VP LO'J HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 2*CH*MOV*2269A    11548*CBH-088B    2 OF 3 C-5      MO GATE            6.00  2    B  oc        EV ST VP CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP
  ---------------------------------------------------------------------------------------------------------- *---------------
* VIRGINIA PO\IER COMPANY                              PAGE:  10 OF 63 SURRY UNIT 2                                      REVISION: 03
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING            SHEET  DRWG VALVE            VALVE    ASME        TEST VALVE TEST      REQ, SHUT TEST NUMBER          NUMBER              NUMBER  COOR TYPE              SIZE      CLASS CAT  POS TYPE TYPE        V*  CSV* VNC*
2*CH*MOV-2269B  11548-CBM*088B      2 OF 3 B*S    MO GATE            6.00  2    E    0            VP
                      ---------------------------------------------
LOW HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 2*CH*MOV-2270A  11548-CBM-088B      2 OF 3 C-3    MO GATE            6.00  2    B    oc          EV ST VP CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP
    -----------------------------------------------------------------------------------
2*CH*MOV*2270B  11548*CBM*088B 2 OF 3 B-3 MO GATE                    6.00 2      E
                                                                                            *--------------------------------------
0            VP LOW HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE
    -------------------------------------------------------------------------------- *-----------------------------------------
  . 2*CH*MOV*2275A  11548*CBM*088B      2 OF 2 D-7    MO GATE            2.00  2    B    oc          EV ST VP "A" CHARGING PUMP MINIMUM RECIRCULATION ISO*
LATION VALVE 2-CH*MOV-2275B  11548*CBM-088B      2 OF 2 D-5    MO GATE            2.00  2    B    oc          EV ST
* VP "B" CHARGING PUMP MINIMUM RECIRCULATION ISO*
LATION VALVE 2*CH*MOV*2275C  11548*CBM*088B      2 OF 2 D-3    MO GATE            2.00  2    B    oc          EV ST VP 11 c *cHARGING PUMP 11              MINIMUM RECIRCULATION ISO*
LATION VALVE 2*CH*MOV*2286A  11548*CBM*088B      2 OF 2 E-7    MO GATE            3.0    2    B    oc          EV ST VP CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 2*CH*MOV*2286B  11548*CBM-088B      2 OF 2 E-6    MO GATE            3.0    2    B    oc            EV ST VP CHARGING PUMP MAIN D.ISCHARGE ISOLATION VALVE
    --------------------------------------------------------------------------------------------------------------------------
                        .                                        .
2*CH*MOV*2286C  11548-CBM-0888      2 OF 2 E-4    MO GATE            3.0    2    B    oc            EV ST VP CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE
    ---------------------------*----------------------------------------------------------------------------------------------
* VIRGINIA PO'JER COMPANY                              PAGE:  11 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE              VALVE    ASHE      TEST VALVE  TEST    REQ SHUT TEST NUMBER          NUMBER          NUMBER COOR TYPE              SIZE. CLASS CAT POS TYPE      TYPE    v- csv- VNC-2*CH*MOV-2287A  11548-CBM*OSSB  2 OF 2 D-7    MO GATE            3.0    2    B    oc          EV ST VP CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE
  ----------------------------------------------------------------------------------------------------------------------*----
2-CH-MOV-2287B  11548-CBM-088B 2 OF 2 D-6 MO GATE                  3.0              oc          EV 2    B ST VP CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE
  -----------------------------------------**----------------------------*---------------------------------------------------
2-CH-MOV-2287C  11548*CBM-088B 2 OF 2 0-4 MO GATE                  3.0              oc          EV 2    B ST VP CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 2-CH-MOV-2289A  11548-CBM*OSSC  1 OF 2 B-4    MO GATE            3.00  2    A    C    CIV    EV          16 LT ST VP
* MAIN CHARGING HEADER ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE            .
2*CH-MOV-2289B  11548-CBM*OSSC  1 OF 2 B-3    MO GATE            3.00  2    B    C            EV          16 ST VP MAIN CHARGING HEADER ISOLATION VALVE, OUTSIDE CONTAINMENT 2-CH-MOV-2350    11548-CBM-088B  1 OF 2 B-5    MO GATE.          2.00  2    B    0            EV          19 ST VP EMERGENCY BORATION TO CHARGING PUMP SUCTION 2-CH-MOV-2373    11548-CBM*OSSB  2 OF 2. E-7. MO GATE              3.00  2    B    0            VP CHARGING PUMP RECIRCULATION HEADER ISOLATION VALVE 2-CH*MOV-2381    11548-CBM*OSSB  1 OF 2 C-8    MO GATE.          3.00  2    A. C    CIV    EV          13 LT ST VP REACTOR COOLANT PUMP SEAL WATER RETURN, OUT*
SIDE CONTAINMENT ISOLATION VALVE
* VIRGINIA POWER COMPANY                              PAGE:  12 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL _COLD ALT VALVE            DRAWING          SHEET DRWG VALVE              VALVE    ASME        TEST VALVE TEST    REQ SHUT TEST NUMBER            NUMBER          NUMBER COOR TYPE              SIZE    CLASS CAT  POS TYPE TYPE      V-  CSV- VNC-2-CH-RV-2203      11548-CBM-OSSC  1. OF 2 F-4    RELIEF VALVE      2.00  2      C    0          SP
                    ---------------------------------------------
LETDOWN RELIEF VlV DOWNSTREAM OF REGEN HX, RV DISCHARGE TO PRESSURIZER RELIEF TANK 2-CH**RV-2382A    11548-CBM-OSSC  2 OF 2  F-5    RELIEF VALVE      2.00  2      C    0          SP REACTOR COOLANT PUMP SEAL WATER RELIEF VALVE, RV DISCHARGE TO PRESSURIZER RELIEF TANK 2-CH-RV-2382B    11548-CBM-OSSB  1 OF 2 C-7    RELIEF VALVE      2.00  2      C    0          SP SEAL WATER HEAT EXCHANGER RELIEF VALVE, RV DISCHARGE TO VOLUME CONTROL TANK 2-CH-TV-2204A    11548-CBM-OSSC  1 OF 2 D-3    AO GATE          2.0    2*    B    C    CIV
* EV            15 FS          15 LT ST VP
                  . LETDOWN CONTROL FROM REGEN HX, INSIDE CONTAINMENT ISOLATION VALVE 2-CH-TV-2204B    11548&deg;CBM-088A  4 OF 4 D-3    AO GATE          2.0. 2      B    C    CIV    EV          15 FS          15
* LT ST      34 VP LETDOWN CONTROL FROM REGEN HX, OUTSIDE CONTAINMENT ISOLATION VALVE
  ----------------------------------------------------------------------------------* ---------------------------------------
* VIRGINIA PO~ER COMPANY                          PAGE:  13 OF 63 SURRY UNIT 2                                REVISION: 03
* SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL  COLO ALT VALVE            ORA~ING            SHEET  OR~G VALVE            VALVE
* ASME        TEST VALVE TEST  REQ  SHUT TEST NUMBER          NUMBER              NUMBER  COOR TYPE              SIZE    CLASS  CAT  POS TYPE  TYPE  V-  CSV- VNC-2-CS-013        11548*CBH-084A      2 OF 3  F*4    CHECK VALVE      8.00  2      AC  OC  CIV  CV    43 LT 11 A11 CONT SPRAY PUMP INSIDE CONTAINMENT ISOLATION DISCHARGE CHECK VALVE 2-CS-024        11548*CBH*084A      2 OF 3  E*4    CHECK VALVE      8.00  2      AC  OC  CIV  CV    43 LT "B" CONT SPRAY PUMP INSIDE CONTAINMENT ISOLATION DISCHARGE CHECK VALVE 2-CS-104        11548*CBH*084A      2 OF 3  F-3    CHECK VALVE      8.00  2      C    oc        CV    43 CONTAINMENT SPRAY PUMP DISCHARGE CHECK VALVE
  -------------------------------------------------------------------------------------------------------------------------- J 2-CS-105        11548-CBM-084A      2 OF 3  E-3    CHECK VALVE      8.00. 2      C    OC        CV    43 CONTAINMENT SPRAY PUMP DISCHARGE CHECK VALVE 2-CS-MOV-200A    11548*CBM*084A      2 OF 3 B*7    MO GATE          12.00  2      B    0          EV ST VP
* CONTAINMENT SPRAY PUMP SUCTION ISOLATION VALVE 2-CS-MOV-200B    11548*CBM*084A      2 OF 3 A*7    MO GATE          12.00  2      B    0          EV ST VP CONTAINMENT SPRAY PUMP SUCTION ISOLATION VALVE 2-CS-MOV-201A    11548*CBM*084A      2 OF 3 F*S    HO GATE          8.00  2      A    oc  CIV  EV LT    39 ST VP "A" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CS-MOV*201B    11548*CBM*084A      2 OF 3  F*S    MO GATE          8.00  2      A    oc  CIV  EV LT    39 ST VP "A" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CS*MOV*201C    11548*CBM*084A      2 OF 3 E*S    HO GATE          8.00  2      A    oc  CIV  EV LT    39 ST VP "B" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE
* VIRGINIA PO\lER COMPANY                            PAGE:  14 OF 63 SURRY UNIT 2                                  REVISION: 03
* SECOND INSPECTION INTERVAL                          DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE              VALVE    ASHE      TEST VALVE TEST    REQ SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE              SIZE      CLASS CAT  POS TYPE TYPE      v- csv- VNC-
                                                  ---*--
2-CS-MOV*201D    11548-CBM-084A    2 OF 3 E-5    MO GATE            8.00  2    A  _DC  CIV    EV LT      39 ST VP "B" CONT SPRAY -PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE
  ---*------------------------------------------------.-----------------------------------------------------------.---------
2*CS-MOV-202A    11548-CBM-084A 3 OF 3 C-6 MO GATE
* 6.00 2        B  0          EV ST VP CHEMICAL ADDITION TANK DISCHARGE TO.RWST ISOLATION VALVE 2*CS-MOV-202B    11548-CBM-084A    3 OF 3 B-6    MO GATE            6.00  2    B    0          EV ST VP CHEMICAL ADDITION TANK DISCHARGE TO RWST ISOLATION VALVE
  ---------------------------------------~----------------------------------------------------------------------------------'
*
* VIRGINIA PO\JER COMPANY                            PAGE:    15 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL  COLD  ALT VALVE            DRA\,/ING        SHEET DR\,/G VALVE            VALVE    ASME      TEST  VALVE  TEST    REC  SHUT  TEST NUMBER          NUMBER            NUMBER COOR TYPE              SIZE      CLASS CAT POS  TYPE  TYPE    V-  CSV-  VNC-2-cv-002        11548-CBM*OSSA    1 OF 2 D-4    MAN GATE          8.00  2    AE  C    CIV    LT CONTAINMENT VACUUM EJECTOR SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 2-CV-HCV-200    11548-CBM*OSSA    1 OF 2 D-3    AO GATE            8.00  2    AE  C    CIV    LT VP CONTAINMENT VACUUM EJECTOR, INSIDE CONTAIN*
MENT ISOLATION VALVE
  ----------------------------------------------------------*----------------------------------------------------------------
2-CV*TV-250A    11548-CBM*OSSA    2 OF 2  E-4    AO GATE            2.00  2    A  C    CIV    EV FS LT ST      34 VP "A" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2-CV-TV-250B    11548-CBM*OSSA    2 OF 2 E-5    AO GATE            2.00  2    A  C    CIV    EV FS LT ST      34 VP
*
                  "A" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT* ISOLATION VALVE 2-CV*TV*250C    11548-CBM*OSSA    2 OF 2 D-4    AO GATE            2.00  2    A  C    CIV    EV FS LT ST      34 VP "B" *coNTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CV*TV*250D    11548*CBM-085A    2 OF 2 D-5    AO GATE            2.00  2    A  C    CIV    EV FS LT ST      34 VP "B" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE
* VIRGINIA POWER COMPANY                              PAGE:  16 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE              VALVE    ASHE        TEST VALVE TEST      REQ SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE              SIZE    CLASS CAT  POS TYPE
* TYPE      v- csv- VNC-2-CW-117        11548-CBM-071A    2 OF 3 F-3    MANUAL BFLY      12.00  NC    8    0            EV                2
                  -----*----------------------------------------
DISCHARGE TUNNEL VENT VALVE 2-CW-MOV-200A    11548-CBM-071A    2 OF 3 F*7    MO BFLY          96.00  NC    8    C            EV ST VP
                  ---------------------------------- *----------
CONDENSER DISCHARGE ISOLATION VALVE
  ---------------~--------------------------. -----------------------------------------------------------------------------
11548-CBM-071A 2 Of 3 F-7 MO BFLY                96.00 NC                        EV
                                                                                                                            -
2-CW-MOV-200B                                                                    8    C ST VP CONDENSER DISCAHRGE ISOLATION VALVE 2-CW-MOV-200C    11548-CBM-071A    2 OF 3 F-6    MO BFLY          96.00  NC    B    C            EV ST VP CONDENSER DISCHARGE ISOLATION VALVE
  ------------------------------- *-----*-----~-------. -------------------------------------------------~--------------------
* 2-CW-MOV-200D    11548*CBM-071A 2 OF 3 F-5 MO BFLY                96.00 NC      B    C            EV ST VP CONDENSER DISCHARGE ISOLATION VALVE 2-CW-MOV-206A    11548-CBM*071A    2 OF 3 D-7    MO BFLY          96.00. 3      8    C            EV ST VP CONDENSER INLET ISOLATION VALVE 2-CW-MOV-206B    11548-CBM-071A    2 OF 3 D-7    MO BFLY          96.00  3      8    C            EV ST VP CONDENSER INLET ISOLATION VALVE 2-CW-MOV-206C    1154S*CBM-071A    2 OF 3 0-5    MO BFLY          96.00 . 3      8    C            EV ST VP CONDENSER INLET ISOLATION VALVE 2*CW-MOV*206D    11548*CBM*071A    2 OF 3 D-5    MO BFLY          96.00  3      8    C            EV ST VP CONDENSER INLET ISOLATION VALVE
* VIRGINIA PO\IER COMPANY                              PAGE:    17 OF 63
* SURRY UNIT 2                                    REVISION: 03 SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD ALT VALVE            DRAWING          SHEET .DRWG VALVE            VALVE    ASHE      TEST VALVE  TEST    REQ  SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE              SIZE      CLASS CAT POS TYPE      TYPE    v-  csv- VNC-2-DA*TV-200A    11548-CBM-083B    3 OF 3 B-3    AO GATE            2.00  2    A    C    CIV    EV FS LT ST      34 VP REACTOR CONTAINMENT SUMP PUMPS DISCHARGE, OUTSIDE CONTAINMENT ISOLATION VALVE
  ------------------------. -----------------------------------------------*-------------------------------------------------
2-DA*TV-200B    11548-CBM-083A    1 OF 2 E-3    AO GATE            2.00  2    A    C    CIV    EV FS LT ST      34 VP REACTOR CONTAINMENT SUMP PUMPS DISCHARGE, INSIDE CONTAINMENT ISOLATION VALVE 2-DA-TV-203A    11548-CBM-083B    3 OF 3 E-3    AO GATE            2.00  2    A    C    CIV    EV FS LT ST      34 VP POST ACCIDENT SAMPLE SYSTEM RETURN, OUTSIDE
* CONTAINMENT ISOLATION VALVE
  ----------------------------------------------------------------------------------------- -----<<---------------------------
2-DA-TV-203B    11548-CBM-083B    3 OF 3 E-3    AO GATE            2.00  2    A    C    CIV    EV FS LT ST      34 VP
                  --------------------* ------------------------
POST ACCIDENT SAMPLE SYSTEM RETURN, OUTSIDE CONTAINMENT TRIP VALVE .
* VIRGINIA POl,IER COMPANY                              PAGE:    18 OF 63
* SURRY UNIT 2                                      REVISION: 03 SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE                VALVE      ASME      TEST VALVE TEST      REQ SHUT TEST NUMBER            NUMBER          NUMBER COOR TYPE                SIZE      CLASS CAT POS TYPE TYPE        v- csv- VNC-
                                                                                                                    ----
2-DG-TV-208A      11548-CBM-083B  1 Of 3 B-2      AO GATE            2.00  2    A  C    .CIV    EV FS LT ST VP PRIMARY DRAIN TRANSFER PUMPS DISCHARGE, INSIDE CONTAINMENT ISOLATION VALVE
  ----------. --------------------------*
2-DG-TV-2088
                                          ----* -------------------------------------------------------------
11548-CBM-083A 2 OF 2 C-3 AO GATE                    2.00 2      A  C      CIV    EV
                                                                                                              ------------------
FS LT ST      34 VP PRIMARY DRAIN TRANSFER PUMPS DISCHARGE, OUT*
SIDE CONTAINMENT ISOLATION VALVE
*
                                                                                                                                  ,I I
* VIRGINIA PO\.IER COMPANY                        PAGE:    19 OF 63 SURRY UNIT 2                                REVISION: 03
* SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL COLD    ALT VALVE        DRAWING          SHF.ET DRI.IG VALVE            VALVE. ASME      TEST VALVE TEST .REQ SHUT    TEST NUMBER      NUMBER          NUMBER COOR TYPE                SIZE      CLASS CAT POS TYPE  TYPE  V-  CSV*  VNC-1-EE-013    11448-CBB*038A  2 OF 3 D-7      CHECK VALVE        1.50  NC    C  0          CV DIESEL EMERGENCY GENERATOR FUEL OIL PUMP DISCHARGE CHECK VALVE 1-EE-019    11448-CBB-038A  2 OF 3  F-7    CHECK VALVE        1.50  NC    C  0          CV DIESEL EMERGENCY GENERATOR FUEL OIL PUMP DISCHARGE CHEC~ VALVE 1-EE-031    11448-CBB-038A  2 OF 3 D-6      CHECK VALVE        1.50  NC    C  0          CV DIESEL EMERGENCY GEIIERATOR FUEL OIL PUMP DISCHARGE CHECK VALVE 1-EE-RV-104  11448-CBB-038A  2 OF 3 D-7      RELIEF VALVE        0.50  NC    C  0          SP DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 1-EE-RV-105  11448-CBB-038A  1 OF 3 F-7      RELIEF VALVE        0.50  NC    C  0          SP DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 1-EE*RV-107  11448-CBB-038A  2 OF 3 D-6      RELIEF VALVE        0.50  NC    C  0          SP
* 1-EE*SOV-102 DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 11448-CBB*038A  2 OF 3 D-4      SO GATE DIESEL FUEL OIL PUMP DISCHARGE VALVE 1.00  NC    B  0          EV    36 1-EE-SOV-103 11448-CBB*038A  2 OF 3 D-4      SO GATE            1.00  NC    B  0          EV    36 DIESEL FUEL OIL PUMP DISCHARGE VALVE 1-EE-SOV-104 11448-CBB-038A  2 OF 3 F-4      SO GATE            1.00  NC    B  0          EV    36 DIESEL FUEL OIL PUMP DISCHARGE VALVE
**


VIRGINIA POl,IER COMPANY                             PAGE:   20 OF 63 SURRY UNIT 2                                     REVISION: 03
VALVE NUMBER 2-CC-TV-220A 2-CC-TV-220B 2-CC-TV-220C VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM-072A 2 OF 7 C-5 AO GATE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE 11548-CBM-072A 3 OF 7 C-5 AO GATE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE 11548-CBM-072A 4 OF 7 C-5 AO GATE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE VALVE SIZE 1.50 ASME CLASS 3
* SECOND INSPECTION INTERVAL                             DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE             DRAWING         SHEET   DRWG VALVE             VALVE     ASME     TEST VALVE TEST   . REQ SHUT TEST NUMBER           NUMBER           NUMBER COOR TYPE             SIZE       CLASS CAT POS TYPE TYPE       v- csv- VNC*
1.50 3
2-EG-040'        11448-CBB-046B  1 OF 2 B-8     CHECK VALVE         0.75  NC   AC  C           CV
1.50 3
                                                                                                                --- --- -
CAT B
LT DIESEL GENERATOR COMPRESSOR DISCHARGE   CHECK VALVE
B B
    --------------------------------~-----------------------------------------------------------------------------------------
ISO TEST VALVE POS TYPE C
2-EGs042          11448-CBB-046B 1 OF 2 B-4 CHECK VALVE               0.75 NC     AC C           CV LT
C C
                    -DIESEL GENERATOR COMPRESSOR DISCHARGE* CHECK VALVE 2-EG-043          11448-CBB-046B  1 OF 2 E-7    AIR PILOT                  NC   B   0           EV ST                  3 EMERGENCY DIESEL GENERATOR STARTING AIR/DRIVE AIR CONTROL/RELAY VALVE 2*-EG-044        11448-CBB-046B   1 OF 2 E-3    AIR *PILOT                  NC   B  0          _EV ST                  3 EMERGENCY DIESEL GENERATOR STARTING AIR/DRIVE AIR CONTROL/RELAY VALVE
TEST TYPE EV ST VP EV ST VP EV ST VP PAGE:
    ----------------------- ---------------------------------------------------------------------------------------------------
6 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-27 27 27
c
 
VALVE NUMBER 1-CH-109 1-CH-116 2-CH-225 2-CH-227 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL.
INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11448-CBM-OBBA 1 OF 4 C-5 CHECK VALVE 11C11 BORIC ACID TRANSFER PUMP DISCHARGE CHECK VALVE 11448*CBM-088A 1 OF 4 C-4 CHECK VALVE 11011 BORIC ACID TRANSFER PUMP DISCHARGE CHECK VALVE 11548-CBM-0888 1 OF 2 D-3 CHECK VALVE MANUAL EMERGENCY BORATION PATH CHECK VALVE 11548-CBM-0888 1 OF 2 B-5 CHECK VALVE MAIN EMERGENCY BORATION LINE TO CHARGING PUMP SUCTION CHECK VALVE VALVE
* ASME SIZE CLASS CAT 2.00 2
C
-~-DO 2
* C 1.0 2
C 2.00 2
C ISO TEST VALVE TEST POS TYPE TYPE 0
CV 0
CV 0
CV 0
CV PAGE:
7 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-19 19 l
2-CH-228 2-CH-229 2-CH-230 11548-CBM-0888 1 OF 2 B-4 MANUAL GATE MANUAL EMERGENCY BORATION PATH MANUAL VALVE 11548-CBM-0888 1 OF 2 B-4 CHECK VALVE MANUAL EMERGENCY BORATION PATH CHECK VALVE 11548-CBM-0888 1 OF 3 C-6 CHECK VALVE CHARGING PUMP *suPPLY FROM VOLUME CONTROL TANK DISCHARGE CHECK VALVE 1.0 2
1.0 2
4.00 2
B 0
EV 19 C
0 CV 19 C
0 CV 2-CH-256 2-CH-258 2*CH-265 11548-CBM-0888 2 OF 2 D-7 CHECK VALVE 11A11 CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE 11548-CBM-0888 2 OF 2 D-7 CHECK VALVE 11A11 CHARGING PUMP DISCHARGE CHECK VALVE 11548-CBM-0888 2 OF 2 D-6 CHECK VALVE 11811 CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE 2.00 2
C 3.00 2
C 2.00 2
C 0
CV oc CV 14 0
CV
-------~------- *-------------------------------* ----------------------------------- ---------------------------------------
2-CH-267 11548-CBM-0888 2 OF 2 0*6 CHECK VALVE 11811 CHAR.GING PUMP DISCHARGE CHECK VALVE 3.00. 2 C
oc CV 14
---------------------*-----------------------~---------.-------------------------------------------------------------------
2-CH-274 11548-CBM-0888 2 OF 2 D-4 CHECK VALVE 2.00 2
C
: 0.
CV I
"C" CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE
 
VALVE NUMBER 2-CH-276 DRA\\IING SHEET NUMBER NUMBER 11548-CBM-0888 2 OF 2 VIRGINIA PO'.IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DR\\IG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT D-4 CHECIC VALVE 3.00 2
C 11C11 CHARGING PUMP DISCHARGE CHECIC VALVE TEST POS OC 2-CH-309 11548-CBM*OSSC
* 1 OF 2 D-4 CHECIC VALVE 3.00 2
AC C
MAIN CHARGING SUPPLY HEADER, INSIDE CONTAIN*
MENT ISOLATION CHECIC VALVE 2-CH*FCV-2113A 11548-CBM-OSSB 1 OF 2 C-3 AO GLOBE MANUAL EMERGENCY BORATION PATH FLOIJ CONTROL VALVE
,.o 2
B 0
ISO VALVE TYPE CIV TEST TYPE CV CV LT EV FS ST VP PAGE:
8 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-14 20 2-CH-FCV*2113B 11548-CBM-OSSB 1 OF 3 b-5 AO GATE MAKEUP TO CHARGING PUMP SUCTION LINE ISOLATION VALVE 2*CH*FCV*2114A 11548-CBM*OSSB 1 OF 2 D-4 AO GLOBE
---------------------------------------~-----
PRIMARY GRADE \\IATER SUPPLY TO BORIC ACID BLENDER ISOLATION VALVE 2-CH*FCV-2114B 11548-CBM-OSSB 1 OF 3 0-5 AO GATE 2-CH*FCV-2160 PRIMARY GRADE \\IATER TO VCT LINE ISOLATION VALVE 11548-CBM*OSSC 1 OF 2 B-4 AO GLOBE CHARGING FLO\\I CONTROL TO LOOP FILL HEADER, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CH*LCV*2115B 11548-CBM-OSSB 2 OF 2 B*8 MO GATE CHARGING PUMP SUPPLY ISOLATION VALVE FROM REFUELING \\IATER STORAGE TANK 2.00 2
2.0 2
2.00 2
2.00 8.00 2
B C
B C
B C
AE C
B oc CIV EV FS ST VP EV FS ST VP EV FS ST VP LT VP EV ST VP
 
VALVE NUMBER DRAWING NUMBER VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE SHE.ET
. DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASHE CLASS CAT 2*CH*LCV-2115C 11548*CBM*088B 1 OF 2 C-6 MO GATE 4.00 2
B CHARGING PUMP SUPPLY ISOLATION FROM VOLUME CONTROL TANK ISO TEST VALVE POS
* TYPE C
TEST TYPE EV ST VP PAGE:
9 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V*
CSV*
VNC*
11 2*CH*LCV-2115D 11548*CBM-088B 2 OF. 2 C-8 MO GATE CHARGING PUMP SUPPLY ISOLATION VALVE FROM REFUELING WATER STORAGE TANK 2*CH*LCV*2115E 11548*CBM*088B 1 OF 2 C-6 MO GATE CHARGING PUMP SUPPLY ISOLATION VALVE, FROM VOLUME CONTROL TANK 8.00 - 2 4.00 2
B oc B
C EV ST VP EV ST VP 11 2-CH*LCV-2460A 11548*CBM-088C OF 2 F-7 AO GLOBE NORMAL LETDOWN TO REGENERAHVE HEAT EXCHANGER ISOLATION VALVE 2.00 B
C EV FS ST VP 15 15 2*CH*LCV*2460B, 11548*CBH*088C 1 OF 2 F-7 AO GLOBE NOR~L LETDOWN TO REGENERATIVE HEAT EXCHANGE.R ISOLATION VALVE 2*CH*HOV-2267A 11548*CBH*088B 2 OF 3 C-7 HO GATE CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP 2*CH*MOV*2267B 1154S*CBM-088B 2 OF 3 B-7 MO GATE LO'J HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 2*CH*MOV*2269A 11548*CBH-088B 2 OF 3 C-5 MO GATE CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP 2.00 6.00 2
6.00 2
6.00 2
B C
B oc E
0 B
oc EV FS ST VP EV ST VP VP EV ST VP 15 15
 
VALVE NUMBER 2*CH*MOV-2269B DRAWING SHEET NUMBER NUMBER 11548-CBM*088B 2 OF 3 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRWG VALVE COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE B*S MO GATE 6.00 2
E 0
VP LOW HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 2*CH*MOV-2270A 11548-CBM-088B 2 OF 3 C-3 MO GATE 6.00 2
B oc EV ST VP CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP PAGE:
10 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ, SHUT TEST V*
CSV*
VNC*
2*CH*MOV*2270B 11548*CBM*088B 2 OF 3 B-3 MO GATE LOW HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 6.00 2
E 0
VP
. 2*CH*MOV*2275A 11548*CBM*088B 2 OF 2 D-7 MO GATE "A" CHARGING PUMP MINIMUM RECIRCULATION ISO*
LATION VALVE 2-CH*MOV-2275B 11548*CBM-088B 2 OF 2 D-5 MO GATE "B" CHARGING PUMP MINIMUM RECIRCULATION ISO*
LATION VALVE 2*CH*MOV*2275C 11548*CBM*088B 2 OF 2 D-3 MO GATE 11c11 *cHARGING PUMP MINIMUM RECIRCULATION ISO*
LATION VALVE 2*CH*MOV*2286A 11548*CBM*088B 2 OF 2 E-7 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 2*CH*MOV*2286B 11548*CBM-088B 2 OF 2 E-6 MO GATE CHARGING PUMP MAIN D.ISCHARGE ISOLATION VALVE 2.00 2
2.00 2
2.00 2
3.0 2
3.0 2
B oc B
oc B
oc B
oc B
oc EV ST VP EV ST VP EV ST VP EV ST VP EV ST VP 2*CH*MOV*2286C 11548-CBM-0888 2 OF 2 E-4 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 3.0 2
B oc EV ST VP
 
VALVE NUMBER DRAWING NUMBER VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE.
ASHE CLASS CAT 2*CH*MOV-2287A 11548-CBM*OSSB 2 OF 2 D-7 MO GATE 3.0 2
B CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE TEST POS oc ISO VALVE TEST TYPE TYPE EV ST VP PAGE:
11 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-CH-MOV-2287B 11548-CBM-088B 2 OF 2 D-6 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 3.0 2
B oc EV ST VP 2-CH-MOV-2287C 11548*CBM-088B 2 OF 2 0-4 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 2-CH-MOV-2289A 11548-CBM*OSSC 1 OF 2 B-4 MO GATE MAIN CHARGING HEADER ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CH-MOV-2289B 11548-CBM*OSSC 1 OF 2 B-3 MO GATE 2-CH-MOV-2350 2-CH-MOV-2373 2-CH*MOV-2381 MAIN CHARGING HEADER ISOLATION VALVE, OUTSIDE CONTAINMENT 11548-CBM-088B 1 OF 2 B-5 MO GATE.
EMERGENCY BORATION TO CHARGING PUMP SUCTION 11548-CBM*OSSB 2 OF 2. E-7. MO GATE CHARGING PUMP RECIRCULATION HEADER ISOLATION VALVE 11548-CBM*OSSB 1 OF 2 C-8 MO GATE.
REACTOR COOLANT PUMP SEAL WATER RETURN, OUT*
SIDE CONTAINMENT ISOLATION VALVE 3.0 2
3.00 2
3.00 2
2.00 2
3.00 2
3.00 2
B oc A
C B
C B
0 B
0 A.
C CIV CIV EV ST VP EV LT ST VP EV ST VP EV ST VP VP EV LT ST VP 16 16 19 13
 
VALVE NUMBER 2-CH-RV-2203 2-CH**RV-2382A 2-CH-RV-2382B 2-CH-TV-2204A 2-CH-TV-2204B VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAWING SHEET DRWG NUMBER NUMBER COOR VALVE TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-OSSC
: 1. OF 2 F-4 RELIEF VALVE LETDOWN RELIEF VlV DOWNSTREAM OF REGEN HX, RV DISCHARGE TO PRESSURIZER RELIEF TANK 11548-CBM-OSSC 2 OF 2 F-5 RELIEF VALVE REACTOR COOLANT PUMP SEAL WATER RELIEF VALVE, RV DISCHARGE TO PRESSURIZER RELIEF TANK 11548-CBM-OSSB 1 OF 2 C-7 RELIEF VALVE SEAL WATER HEAT EXCHANGER RELIEF VALVE, RV DISCHARGE TO VOLUME CONTROL TANK 11548-CBM-OSSC 1 OF 2 D-3 AO GATE
. LETDOWN CONTROL FROM REGEN HX, INSIDE CONTAINMENT ISOLATION VALVE 11548&deg;CBM-088A 4 OF 4 D-3 AO GATE LETDOWN CONTROL FROM REGEN HX, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2
C 2.00 2
C 2.00 2
C 2.0 2*
B 2.0.
2 B
0 0
0 C
C SP SP SP CIV
* EV FS LT ST VP CIV EV FS LT ST VP PAGE:
12 OF 63 REVISION: 03 DATE: 3/19/92 NC REL
_COLD ALT REQ SHUT TEST V-CSV-VNC-34 15 15 15 15
 
VALVE NUMBER 2-CS-013 2-CS-024 2-CS-104 VIRGINIA PO~ER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO ORA~ING NUMBER SHEET OR~G VALVE NUMBER COOR TYPE VALVE
* ASME TEST VALVE TEST SIZE CLASS CAT POS TYPE TYPE 11548*CBH-084A 2 OF 3 F*4 CHECK VALVE 11A11 CONT SPRAY PUMP INSIDE CONTAINMENT ISOLATION DISCHARGE CHECK VALVE 11548*CBH*084A 2 OF 3 E*4 CHECK VALVE "B" CONT SPRAY PUMP INSIDE CONTAINMENT ISOLATION DISCHARGE CHECK VALVE 11548*CBH*084A 2 OF 3 F-3 CHECK VALVE CONTAINMENT SPRAY PUMP DISCHARGE CHECK VALVE 8.00 2
8.00 2
8.00 2
AC OC AC OC C
oc CIV CIV CV LT CV LT CV PAGE:
13 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLO ALT REQ SHUT TEST V-CSV-VNC-43 43 43
-------------------------------------------------------------------------------------------------------------------------- J 2-CS-105 11548-CBM-084A 2 OF 3 E-3 CHECK VALVE 8.00. 2 C
OC CV 43 2-CS-MOV-200A 2-CS-MOV-200B 2-CS-MOV-201A 2*CS-MOV*201B 2*CS*MOV*201C CONTAINMENT SPRAY PUMP DISCHARGE CHECK VALVE 11548*CBM*084A 2 OF 3 B*7 MO GATE CONTAINMENT SPRAY PUMP SUCTION ISOLATION VALVE 11548*CBM*084A 2 OF 3 A*7 MO GATE CONTAINMENT SPRAY PUMP SUCTION ISOLATION VALVE 11548*CBM*084A 2 OF 3 F*S HO GATE "A" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*084A 2 OF 3 F*S MO GATE "A" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*084A 2 OF 3 E*S HO GATE "B" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 12.00 2
12.00 2
8.00 2
8.00 2
8.00 2
B 0
B 0
A oc A
oc A
oc CIV CIV CIV EV ST VP EV ST VP EV LT ST VP EV LT ST VP EV LT ST VP 39 39 39
 
VALVE NUMBER 2-CS-MOV*201D DRAWING SHEET NUMBER NUMBER 11548-CBM-084A 2 OF 3 VIRGINIA PO\\lER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT E-5 MO GATE 8.00 2
A "B" CONT SPRAY -PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE
_DC CIV EV LT ST VP PAGE:
14 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-39 2*CS-MOV-202A 2*CS-MOV-202B 11548-CBM-084A 3 OF 3 C-6 MO GATE CHEMICAL ADDITION TANK DISCHARGE TO.RWST ISOLATION VALVE 11548-CBM-084A 3 OF 3 B-6 MO GATE CHEMICAL ADDITION TANK DISCHARGE TO RWST ISOLATION VALVE
* 6.00 2
6.00 2
B B
0 0
EV ST VP EV ST VP
---------------------------------------~----------------------------------------------------------------------------------'
 
VALVE NUMBER 2-cv-002 2-CV-HCV-200 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRA\\,/ING NUMBER SHEET DR\\,/G VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM*OSSA 1 OF 2 D-4 MAN GATE CONTAINMENT VACUUM EJECTOR SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*OSSA 1 OF 2 D-3 AO GATE CONTAINMENT VACUUM EJECTOR, INSIDE CONTAIN*
MENT ISOLATION VALVE 8.00 2
8.00 2
AE C
CIV AE C
CIV LT LT VP PAGE:
15 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V-CSV-VNC-2-CV*TV-250A 2-CV-TV-250B 2-CV*TV*250C 2*CV*TV*250D 11548-CBM*OSSA 2 OF 2 E-4 AO GATE "A" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*OSSA 2 OF 2 E-5 AO GATE "A" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT* ISOLATION VALVE 11548-CBM*OSSA 2 OF 2 D-4 AO GATE "B" *coNTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM-085A 2 OF 2 D-5 AO GATE "B" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2
2.00 2
2.00 2
2.00 2
A C
CIV A
C CIV A
C CIV A
C CIV EV FS LT ST 34 VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP 34 34 34
 
VALVE NUMBER 2-CW-117 2-CW-MOV-200A VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-071A 2 OF 3 F-3 MANUAL BFLY 12.00 NC 8
DISCHARGE TUNNEL VENT VALVE 11548-CBM-071A 2 OF 3 F*7 MO BFLY 96.00 NC 8
CONDENSER DISCHARGE ISOLATION VALVE TEST POS 0
C ISO VALVE TYPE TEST
* TYPE EV EV ST VP PAGE:
16 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2
---------------~--------------------------. ----------------------------------------------------------------------------- -
2-CW-MOV-200B 11548-CBM-071A 2 Of 3 F-7 MO BFLY 96.00 NC CONDENSER DISCAHRGE ISOLATION VALVE 2-CW-MOV-200C 11548-CBM-071A 2 OF 3 F-6 MO BFLY 96.00 NC CONDENSER DISCHARGE ISOLATION VALVE 8
C B
C EV ST VP EV ST VP
------------------------------- *-----*-----~-------. -------------------------------------------------~--------------------
2-CW-MOV-200D 11548*CBM-071A 2 OF 3 F-5 MO BFLY CONDENSER DISCHARGE ISOLATION VALVE 2-CW-MOV-206A 11548-CBM*071A 2 OF 3 D-7 MO BFLY CONDENSER INLET ISOLATION VALVE 2-CW-MOV-206B 11548-CBM-071A 2 OF 3 D-7 MO BFLY CONDENSER INLET ISOLATION VALVE 2-CW-MOV-206C 1154S*CBM-071A 2 OF 3 0-5 MO BFLY CONDENSER INLET ISOLATION VALVE 2*CW-MOV*206D 11548*CBM*071A 2 OF 3 D-5 MO BFLY CONDENSER INLET ISOLATION VALVE 96.00 NC B
96.00. 3 8
96.00 3
8 96.00. 3 8
96.00 3
8 C
C C
C C
EV ST VP EV ST VP EV ST VP EV ST VP EV ST VP
 
VALVE NUMBER 2-DA*TV-200A DRAWING SHEET NUMBER NUMBER 11548-CBM-083B 3 OF 3 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE
.DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT B-3 AO GATE 2.00 2
A REACTOR CONTAINMENT SUMP PUMPS DISCHARGE, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C
CIV EV FS LT ST VP PAGE:
17 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2-DA*TV-200B 2-DA-TV-203A 11548-CBM-083A 1 OF 2 E-3 AO GATE REACTOR CONTAINMENT SUMP PUMPS DISCHARGE, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-083B 3 OF 3 E-3 AO GATE POST ACCIDENT SAMPLE SYSTEM RETURN, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2
2.00 2
A C
CIV A
C CIV EV FS LT ST VP EV FS LT ST VP 34 34 2-DA-TV-203B 11548-CBM-083B 3 OF 3 E-3 AO GATE POST ACCIDENT SAMPLE SYSTEM RETURN, OUTSIDE CONTAINMENT TRIP VALVE.
2.00 2
A C
CIV EV FS LT ST VP 34
 
VALVE NUMBER 2-DG-TV-208A DRAWING SHEET NUMBER NUMBER 11548-CBM-083B 1 Of 3 VIRGINIA POl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT B-2 AO GATE 2.00 2
A PRIMARY DRAIN TRANSFER PUMPS DISCHARGE, INSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C
.CIV EV FS LT ST VP PAGE:
18 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-DG-TV-2088 11548-CBM-083A 2 OF 2 C-3 AO GATE PRIMARY DRAIN TRANSFER PUMPS DISCHARGE, OUT*
SIDE CONTAINMENT ISOLATION VALVE 2.00 2
A C
CIV EV FS LT ST VP 34
,I I
 
VALVE NUMBER 1-EE-013 1-EE-019 1-EE-031 1-EE-RV-104 1-EE-RV-105 1-EE*RV-107 1-EE*SOV-102 1-EE-SOV-103 1-EE-SOV-104 VIRGINIA PO\\.IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAWING NUMBER SHF.ET DRI.IG VALVE NUMBER COOR TYPE VALVE.
ASME TEST VALVE TEST SIZE CLASS CAT POS TYPE TYPE 11448-CBB*038A 2 OF 3 D-7 CHECK VALVE DIESEL EMERGENCY GENERATOR FUEL OIL PUMP DISCHARGE CHECK VALVE 11448-CBB-038A 2 OF 3 F-7 CHECK VALVE DIESEL EMERGENCY GENERATOR FUEL OIL PUMP DISCHARGE CHEC~ VALVE 11448-CBB-038A 2 OF 3 D-6 CHECK VALVE DIESEL EMERGENCY GEIIERATOR FUEL OIL PUMP DISCHARGE CHECK VALVE 11448-CBB-038A 2 OF 3 D-7 RELIEF VALVE DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 11448-CBB-038A 1 OF 3 F-7 RELIEF VALVE DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 11448-CBB-038A 2 OF 3 D-6 RELIEF VALVE DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 11448-CBB*038A 2 OF 3 D-4 SO GATE DIESEL FUEL OIL PUMP DISCHARGE VALVE 11448-CBB*038A 2 OF 3 D-4 SO GATE DIESEL FUEL OIL PUMP DISCHARGE VALVE 11448-CBB-038A 2 OF 3 F-4 SO GATE DIESEL FUEL OIL PUMP DISCHARGE VALVE 1.50 NC 1.50 NC 1.50 NC 0.50 NC 0.50 NC 0.50 NC 1.00 NC 1.00 NC 1.00 NC C
0 CV C
0 CV C
0 CV C
0 SP C
0 SP C
0 SP B
0 EV B
0 EV B
0 EV PAGE:
19 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT
.REQ SHUT TEST V-CSV*
VNC-36 36 36
 
VALVE NUMBER 2-EG-040' VIRGINIA POl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11448-CBB-046B 1 OF 2 B-8 CHECK VALVE DIESEL GENERATOR COMPRESSOR DISCHARGE CHECK VALVE VALVE SIZE 0.75 ASME CLASS CAT NC AC TEST POS C
ISO VALVE TEST TYPE TYPE CV LT PAGE:
20 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT
. REQ SHUT TEST v-csv-VNC*
--------------------------------~-----------------------------------------------------------------------------------------
2-EGs042 2-EG-043 2*-EG-044 11448-CBB-046B 1 OF 2 B-4 CHECK VALVE
-DIESEL GENERATOR COMPRESSOR DISCHARGE* CHECK VALVE 11448-CBB-046B 1 OF 2 E-7 AIR PILOT EMERGENCY DIESEL GENERATOR STARTING AIR/DRIVE AIR CONTROL/RELAY VALVE 11448-CBB-046B 1 OF 2 E-3 AIR *PILOT EMERGENCY DIESEL GENERATOR STARTING AIR/DRIVE AIR CONTROL/RELAY VALVE 0.75 NC AC C
NC B
0 NC B
0 CV LT EV ST
_EV ST 3
3 2-EG-045 11448-CBB-046B 1 OF 2 E-7 CHECK VALVE EMERGENCY DIESEL GENERATOR START PRESSURE EQUALIZING CHECK VALVE NC c
* oc*
* oc*
2-EG-045          11448-CBB-046B  1 OF 2 E-7    CHECK VALVE                NC                                        3
3  
* EMERGENCY DIESEL GENERATOR START PRESSURE EQUALIZING CHECK VALVE
. ----------------------------------~-----------------------------------------------*-------------------. -------------------
  . ----------------------------------~-----------------------------------------------*-------------------. -------------------
2-EG-046 2-EG*SOV-200A 2-EG*SOV-200B 11448*CBB-046B. 1 OF 2 E-4 CHECK VALVE EMERGENCY DIESEL GENERATOR START PRESSURE EQUALIZING CHECK VALVE 11448-CBB-046B 1 OF 2 0-7 SO GATE DIESEL AIR START SYSTEM SOLENOID VALVE 11448-CBB-046B 1 OF 2 0-4 SO GATE DIESEL AIR START SYSTEM SOLENOID VALVE NC C
2-EG-046         11448*CBB-046B. 1 OF 2 E-4 CHECK VALVE                     NC    C  oc          CV                  3 EMERGENCY DIESEL GENERATOR START PRESSURE EQUALIZING CHECK VALVE 2-EG*SOV-200A    11448-CBB-046B   1 OF 2 0-7   SO GATE             1.00  NC    B  oc          EV ST      37 DIESEL AIR START SYSTEM SOLENOID VALVE 2-EG*SOV-200B    11448-CBB-046B   1 OF 2 0-4   SO GATE             1.00  NC    B  oc          EV*
1.00 NC B
ST      37 DIESEL AIR START SYSTEM SOLENOID VALVE
1.00 NC B
* VIRGINIA PO\JER COMPANY                         PAGE:  21 OF 63 SURRY UNIT 2
oc oc oc CV EV ST EV*
* REVISION: 03 SECOND INSPECTION INTERVAL                       DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL  COLD ALT VALVE    DRAWING         SHEET DRWG VALVE               VALVE     ASME       TEST VALVE TEST REC  SHUT TEST NUMBER   NUMBER          NUMBER COOR TYPE               SIZE     CLASS CAT POS  TYPE  TYPE v-  csv- VNC-2-FP-151 11448-CBB-0478   1 OF 3 D-4   MAN BALL           4.00   2     AE   C    CIV  LT
ST 3
          ---------------------------------------------
37 37
FIRE PROTECTION SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 2-FP-152 11448-CBB-0478  1 OF 3 D-5    MAN BALL          4.00  2    AE  C    CIV  LT FIRE PROTECTION SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE
 
*
VALVE NUMBER 2-FP-151 2-FP-152 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASME NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11448-CBB-0478 1 OF 3 D-4 MAN BALL 4.00 2
* VIRGINIA PO'JER COMPANY
AE FIRE PROTECTION SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE TEST POS C
* PAGE:  22 OF 63 SURRY UNIT 2                                       REVISION: 03
11448-CBB-0478 1 OF 3 D-5 MAN BALL FIRE PROTECTION SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 4.00 2
* SECOND INSPECTION INTERVAL                               DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL COLD ALT VALVE              DRAWING           SHEET DRWG VALVE               VALVE    ASHE          TEST VALVE  TEST    REQ SHUT TEST NUMBER            NUMBER             NUMBER COOR TYPE               SIZE      CLASS CAT    POS TYPE    TYPE    V*    CSV* VNC*
AE C
2*FW*010          11548*CBM*068A     1 OF 4 E-6     CHECK VALVE       14.00   2       C   C            CV      5
ISO VALVE TEST TYPE TYPE CIV LT CIV LT PAGE:
                    ---------------------------------------------
21 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST v-csv-VNC-
                    "A" MAIN FEEDWATER SUPPLY, INSIDE CONTAINMENT PENETRATION CHECK VALVE 2*FW*027          11548*CBM-068A     1 OF 4 E-6     CHECK VALVE       3.00    2      C    0            CV            4 "A" AUXILIARY FEEDWATER HEADER CHECK VALVE AT MAIN FEEDWATER HEADER
 
  --------------------------------------------------------------------------------------------------------------------------
VALVE NUMBER 2*FW*010 2*FW*027 VIRGINIA PO'JER COMPANY
        .                                                                            .
* SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548*CBM*068A 1 OF 4 E-6 CHECK VALVE "A" MAIN FEEDWATER SUPPLY, INSIDE CONTAINMENT PENETRATION CHECK VALVE 11548*CBM-068A 1 OF 4 E-6 CHECK VALVE "A" AUXILIARY FEEDWATER HEADER CHECK VALVE AT MAIN FEEDWATER HEADER VALVE ASHE SIZE CLASS CAT 14.00 2
2*FW*041          11548-CBM*068A    1 OF 4 D*6    CHECK VALVE      14.00    2      C    C            CV      5 11 8" MAIN FEEDWATER HEADER SUPPLY, INSIDE CONTAINMENT PENETRATION CHECK VALVE
C 3.00 2
  --------------------------------. -----------------------------------------------------------------------------------------
C ISO TEST VALVE POS TYPE C
2-FW-058          11548*CBM*068A
0 TEST TYPE CV CV PAGE:
                            .      .
22 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*
1 OF 4 C*6     CHECK VALVE       3.00   2      C   0           CV           4
CSV*
                    ---------------------------------------------
VNC*
                    "B" AUXILIARY FEEDWATER HEADER CHECK VALVE AT MAIN FEEDWATER HEADER
5 4
  -----------------------------------------------------------------------------------------------------------*
2*FW*041 11548-CBM*068A 1 OF 4 D*6 CHECK VALVE 118" MAIN FEEDWATER HEADER SUPPLY, INSIDE CONTAINMENT PENETRATION CHECK VALVE 14.00 2
CV
C C
                                                                                                                      --------------
CV 5
2* FW-072          11548*CBM*068A    1 OF 4 C-6     CHECK VALVE      14.00   2       C   C                    5 "C" MAIN FEEDWATER SUPPLY, I.NS IDE CONTAINMENT
2-FW-058 11548*CBM*068A 1 OF 4 C*6 CHECK VALVE "B" AUXILIARY FEEDWATER HEADER CHECK VALVE AT MAIN FEEDWATER HEADER 3.00 2
                  . PENETRATION CHECK VALVE
C 0
  ------------------------------------------------------------------------------------------------* -------------------------
CV 4
2-FW-089          11548-CBM-068A    1  or 4 B-7    CHECK VALVE        3.00    2      C    0            CV            4
2* FW-072 11548*CBM*068A 1 OF 4 C-6 CHECK VALVE "C" MAIN FEEDWATER SUPPLY, I.NS IDE CONTAINMENT
* 2-FW-131 11 C" AUXILIARY FEEDIJATER HEADER CHECK VALVE AT .
. PENETRATION CHECK VALVE 14.00 2
MAIN FEEDWATER HEADER 11548*CBM*068A    1 OF 4 8*4     CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* INSIDE 6.00   2       C    0            CV            4*
C C
  -*------------------------------------------------------------------------------------------------------------------------
CV 5
2-FW-133          11548*CBM*068A    1 OF 4 8*4    CHECK VALVE        6.00. 2      C    0            CV            4 AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* . OUTSIDE                                          .
2-FW-089 2-FW-131 11548-CBM-068A 1 or 4 B-7 CHECK VALVE 11C" AUXILIARY FEEDIJATER HEADER CHECK VALVE AT.
  --------------------------------------------------------------------------------------------------------------------------
MAIN FEEDWATER HEADER 11548*CBM*068A 1 OF 4 8*4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* INSIDE 3.00 2
2-FW* 136          11548*CBM*068A 1 OF 4 A-4 CHECK VALVE               6.00 2         C    0           CV            4
6.00 2
                    --------------------------------------
C 0
AUXILIARY FEEDWATER HEADER CHECK VALVE AT
CV 4
                                                              *------
C 0
CONTAINMENT PENETRATION* INSIDE 2-FW* 138          11548*CBM*068A    1 OF 4 A-4    CHECK VALVE        6.00    2      C    0            CV            4 AUXILIARY FEEDWATER HEADER CHECK VALVE AT.
CV 4*
CONTAINMENT PENETRATION* OUTSIDE
2-FW-133 11548*CBM*068A 1 OF 4 8*4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* OUTSIDE 6.00.
  ---. ------------------------------------.
2 C
2-FW-142
0 CV 4
                                                --------------------~-----------*
2-FW* 136 2-FW* 138 11548*CBM*068A 1 OF 4 A-4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* INSIDE 11548*CBM*068A 1 OF 4 A-4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT.
11548*CBM*068A 3 OF 4 D-8 CHECK VALVE                6.00 3
CONTAINMENT PENETRATION* OUTSIDE 6.00 2
                                                                                    ------------------------------------------------
6.00 2
C    oc          CV            4 TURBINE_DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE
C 0
  ----------------------------------------------------------------------
CV 4
11548*CBM*068A 3 OF 4 D-7 CHECK VALVE
C 0
                                                                              *---------------------------------------------------
CV 4
1.00 3                            CV      41 2*FW*144                                                                                C    0 TURBINE DRIVEN AUXILIARY FEEDWATER PUMP RECIRC LINE CHECK VALVE .
---. ------------------------------------. --------------------~-----------* ------------------------------------------------
* VIRGINIA POWER COMPANY                          PAGE:    23 OF 63 SURRY UNIT 2                                REVISION: 03
2-FW-142 11548*CBM*068A 3 OF 4 D-8 CHECK VALVE TURBINE_DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE 6.00 3
* SECOND INSPECTION INTERVAL                          DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO
C oc CV 4
* REL COLD    ALT VALVE             DRAWING            SHEET DRWG VALVE                VALVE    ASME      TEST VALVE TEST    REQ SHUT    TEST NUMBER            NUMBER            NUMBER COOR TYPE                 SIZE    CLASS CAT POS TYPE  TYPE    V-   CSV-   VNC-2-F.W-148          11548-CBM-068A    3 OF 4 E-7    CHECK VALVE         1.00  3    C  0          CV      41
2*FW*144 11548*CBM*068A 3 OF 4 D-7 CHECK VALVE TURBINE DRIVEN AUXILIARY FEEDWATER PUMP RECIRC LINE CHECK VALVE 1.00 3
                    -------------------------~-------------------
C 0
AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 2-FW-157          11548-CBM-068A    3 OF 4  D-6    CHECK VALVE                     C   oc        CV            4
CV 41
                                      .                   .
 
                    "A" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE 2:;~:;;~---------;;;4a:~;;:o~---i-~;-4--~:6---~~~~~-~~~~~-------;~oo---i------~----~------------~~------;;;--------------        ~
VALVE NUMBER 2-F.W-148 2-FW-157 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-068A 3 OF 4 E-7 CHECK VALVE
                    "A" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP RECIRC LINE. CHECK VALVE 2-FW-163          11548-CBM-068A    3 OF 4 E-6    CHECK VALVE        1.00  3    C*  0          CV      41 AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 2-FW-172          11548-CBM-068A    3 OF 4  D-5    CHECK VALVE        6.00  3    C  QC        CV            4 "B" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE 2-FW-174          11548-CBM-068A. 3 OF 4 D-5     CHECK VALVE         1.00  3    C  0          CV      41
-------------------------~-------------------
* 2-FW-178 11 B" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP
AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 11548-CBM-068A 3 OF 4 D-6 CHECK VALVE "A" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE VALVE ASME SIZE CLASS CAT 1.00 3
                    .RECIRC LINE CHECK VALVE 11548-CBM-068A    3 OF 4 E-4    CHECK VALVE AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 1.00  3    C  0          CV      41 2-FW-272          11548-CBM-068A    1 OF 4 A-8    CHECK VALVE        6.00  2     C  0          CV            4 CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2)            .                                                                .
C C
  --------------------------------------------------------------------------------------------------------------------------
ISO TEST VALVE POS TYPE 0
2-FW-273          11548-CBM-068A 1 OF 4 A-7 CHECK VALVE                6.00   2     C   0          CV           4 CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 2-FW-305          11548-CBM-068A    1 OF 4 A-5    CHECK VALVE         6.00  2    C  0          CV            4 CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 2-FW-306          11548-CBM-068A    1 OF 4 A-5    CHECK VALVE         6.00   2     C  0          CV            4 CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2)
oc TEST TYPE CV CV PAGE:
  - -----------------------------------------------------*--------------------------------------------------------------------
23 OF 63 REVISION: 03 DATE: 3/19/92 NC
2-FW*FCV-2478      11548-CBM-068A    1 OF 4 E-4    AO GATE            14.00  NC    B  C          EV            28 FS        .. 28 ST VP
* REL COLD ALT REQ SHUT TEST V-CSV-VNC-41 4
* MAIN FEEDWATER REGULATING VALVE
2:;~:;;~---------;;;4a:~;;:o~---i-~;-4--~:6---~~~~~-~~~~~-------;~oo---i------~----~------------~~------;;;--------------
~
2-FW-163 2-FW-172 2-FW-174 2-FW-178 2-FW-272 "A" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP RECIRC LINE. CHECK VALVE 11548-CBM-068A 3 OF 4 E-6 CHECK VALVE AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 11548-CBM-068A 3 OF 4 D-5 CHECK VALVE "B" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE 11548-CBM-068A.
3 OF 4 D-5 CHECK VALVE 11B" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP
.RECIRC LINE CHECK VALVE 11548-CBM-068A 3 OF 4 E-4 CHECK VALVE AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 11548-CBM-068A 1 OF 4 A-8 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 1.00 3
6.00 3
1.00 3
1.00 3
6.00 2
C
* 0 CV 41 C
QC CV 4
C 0
CV 41 C
0 CV 41 C
0 CV 4
2-FW-273 2-FW-305 2-FW-306 11548-CBM-068A 1 OF 4 A-7 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 11548-CBM-068A 1 OF 4 A-5 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 11548-CBM-068A 1 OF 4 A-5 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 6.00 2
C 6.00 2
C 6.00 2
C 0
CV 4
0 CV 4
0 CV 4
2-FW*FCV-2478 11548-CBM-068A 1 OF 4 E-4 AO GATE 14.00 NC MAIN FEEDWATER REGULATING VALVE B
C EV FS ST VP 28
.. 28
 
VALVE NUMBER 2-FW-FCV-2488 2-FW-FCV-2498 2-FW*HCV*255A 2*FW*HCV*255B 2*FW*HCV*255C VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-068A 1 Of 4 D-4 AO GATE 14-00 NC B
MAIN FEEDWATER REGULATING VALVE 11548-CBM*068A 1 OF 4 B-4 AO GATE 14.00 NC B
MAIN FEEDWATER REGULATING VALVE 11548-CBM-068A 1 OF 4 F-3 AO GATE 4.00 NC B
*MAIN FEEDWATER REGULATING VALVE BYPASS VALVE 11548-CBM~068A 1 OF 4 D-3 AO GATE 4.00 NC B
MAIN FEEDWATER REGULATING VALVE BYPASS VALVE 11548-CBM*068A 1 OF 4 C-3 AO GATE 4.00 NC B
MAIN FEEDWATER REGULATING VALVE BYPASS VALVE ISO TEST VALVE POS TYPE C
C C
C C
TEST TYPE EV FS ST VP EV FS.
ST VP EV*
FS ST
. VP EV FS.
ST VP EV FS ST VP PAGE:
24 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-COLD SHUT csv-28 28 28 28 28 28 28 28 28 28 NC ALT TEST VNC*
2*FW*MOV*251A 2-FW*MOV-251B 11548-CBM*068A 1 OF 4 B-7 MO GLOBE NORMAL AUXILIARY FEEDWATER SUPPLY TO "C" STEAM GENERATOR 11548*CBM*068A 1 OF 4 B-7 MO GLOBE STANDBY AUXILIARY FEEDWATER SUPPLY TO 11C11 STEAM GENERATOR 3.00 2
3.00 2
B oc B
oc EV ST VP EV ST VP 2-FW*MOV*251C 11548-CBM-068A 1 OF 4 B-6 MO GLOBE STANDBY AUXILIARY FEEDWATER SUPPLY TO "B" STEAM GENERA TOR 3.00 2
B oc EV ST VP
 
VALVE NUMBER 2-FW-MOV-251D VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE
. DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM-068A 1 OF 4 B-6 MO GLOBE NORMAL AUXILIARY FEEDWATER SUPPLY TO "B" STEAM GENERATOR VALVE.
SIZE ASHE CLASS CAT 2
B TEST P.OS oc ISO VALVE TEST TYPE TYPE EV ST VP PAGE:
25 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-FW-MOV-251E 2-FW-MOV-251F 2-FW-MOV-260A 2-FW-MOV-260B 11548-CBM-068A 1 OF 4 B-6 MO GLOBE STANDBY AUXILIARY FEEDIJATER SUPPLY TO "A" STEAM GENERATOR, 11548-CBM-068A 1 OF 4 B-5 MO GLOBE STANDBY AUXILIARY FEEDWATE.R SUPPLY TO 11A11 STEAlil GENERATOR 11448-CBM-068A 3 OF 4 F-7 MO GLOBE CROSS - CONNECT FOR UNIT 1 AUXILIARY FEED-WATER FROM UNIT 2 11448-CBM-068A 3 OF 4 F-7 MO GLOBE CROSS - CONNECT FOR UNIT 1 AUXILIARY FEED-WATER. FROM UNIT 2 3.00 2
3.00 2
6.00 3
6.00 3
B oc B
oc B
0 B
o EV ST VP EV ST VP EV ST VP EV ST VP
 
VALVE NUMBER 2-GW*TV-200 2-GW*TV-201 2-GW*TV-202 2*GW*TV*203 2-GW*TV*204 2*GW*TV*205 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASME NUMBER NUMBER COOR TYPE SIZE CLASS 11448*CBM*090C 1 OF 1 C-4 SO GATE 0.375 2
SUCTION LINE TO HYDROGEN ANALYZER* UNIT 1 l1448*CBM-090C 1 OF 1 C-4 SO GATE 0.375 2
SUCTION LINE TO HYDROGEN ANALYZER* UNIT 1 11448*CBM-090C 1 OF 1 B-4 SO GATE 0.375 2
DISCHARGE LINE TO HYDROGEN ANALYZER* UNIT 1 11448*CBM-090C 1 OF 1 B-4 SO GATE 0.375 2
DISCHARGE LINE TO HYDROGEN ANALYZER* UNIT 1 11448*CBM-090C 1 OF 1 E-4 SO GATE 0.375 2
SUPPLY TO UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 11448*CBM-090C 1 OF 1 E-4. SO GATE SUPPLY TO UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 2
CAT A
A A
A A
A ISO TEST VALVE POS TYPE C
CIV C
CIV C
CIV C
CIV C
CIV C
CIV TEST TYPE EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP PAGE:
26 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD AP REQ SHUT TEST v-csv-VNC*
34 34 34 34 34 34 2-GW*TV-206 11448-CBM*090C 1 OF 1 D-4 SO GATE RETURN FROM UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 2
A C
CIV EV FS LT ST VP 34 I
 
VALVE NUMBER 2-GW-TV-207 2-GW*TV-211A 2-GW-TV-2118 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYP.E 11448-CBM-090C 1 OF 1 D-4 SO GATE RETURN FROM UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 11448*CBM-090C 1 OF 1 F-3 SO GATE UNIT 1 SAMPLE LINE TO AIR SAMPLE PANEL, INSIDE CONTAINMENT ISOLATION VALVE 11448-CBM-090C 1 OF 1 F-3 SO GATE UNIT 1 SAMPLE LINE TO AIR SAMPLE PANEL, OUTSIDE CONTAINMENT ISOLATION VALVE VALVE ASHE SIZE CLASS CAT 0.375 2
A 0.375 2
A 0.375 2
A TEST POS C
C
: c.
ISO VALVE TEST TYPE TYPE CIV EV FS LT ST VP CIV
*EV CIV FS LT ST VP EV FS.
LT ST VP PAGE:
27 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*
34 34 34
-------------------------------~---------------*----------------------------------------------------------------------* ---
I
 
VALVE NUMBER 2-IA-381 2-IA-384 2-IA-395 2-IA-396 2-IA-446 2-IA-704 2-IA-864 2-IA-868 2-IA-947 VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG. VALVE NUMBER COOR TYPE 11548-FM -075C 2 OF 2 B-6 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2456 ISOLATION CHECK VALVE 11548-FM -075C 2 OF 2 B-5 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2455C ISOLATION CHECK VALVE 11548-FM -075C 2 OF 2. B-6 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2456 SUPPLY CHECK VALVE 11548-FM -075C 2 OF 2 B-5 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2455C SUPPLY CHECK VALVE 11448-CBM-075C 1 OF 4 D-7 MAN GATE BACKUP INSTRUMENT AIR TO CONTAINMENT FROM UNIT 2 11548-CBM-075B 2 OF 2 C-3 MAN.GATE BACKUP INSTRUMENT AIR TO CONTAINMENT FROM UNIT 2 11548-CB~-075C 1 OF 2 E-3 CHECK VALVE INS1RUMENT AIR SUPPLY TO CONTAINMENT, INSIDE CONTAINMENT ISOLATION CHECK VALVE 11548-CBM-075C 1 OF 2 E-3 CHECK VALVE INSTRUMENT AIR SUPPLY TO CONTAINMENT, INSIDE CONTAINMENT ISOLATION CHECK VALVE 11548-FM -0750 1 OF 1 B-7 CHECK VALVE BOTTLED AIR SUPPLY TO 2-MS-SOV-202A,B ISOLATION CHECK VALVE VALVE SIZE 0.75 ASHE CLASS NC 0.75 NC 0.75 NC O. 75 NC 2.00
: 2.
2.00 2
2.00 2
2.00 2
0.5 NC TEST CAT POS AC C
AC C
C 0
C 0
AE C
AE C
AC C
AC C
AC C
ISO VALVE TYPE CIV CIV CIV CIV TEST TYPE CV LT CV LT CV CV LT LT CV LT CV LT CV LT PAGE:
28 OF.63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-39 44 44 2-IA-948 2-IA-RV-210 11548-FM -075D 1 OF 1 9-8 CHECK VALVE BOTTLED AIR SUPPLY TO 2-MS-SOV-202A,B SUPPLY CHECK VALVE 11548-CBM-075C 2 OF 2 B-6 RELIEF VALVE BOTTLED AIR SUPPLY TO PORV'S RELIEF VALVE 0.5 NC NC C
0 CV C
* 0 SP
* VALVE NUMBER 2-IA-RV-211 2-IA-TV-200 2-IA-TV-201A 2-IA-TV*201B VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE.TESTING PROGRAM - VALVE TABLE DRAIJING SHEET DRIJG VALVE NUMBER NUMl!ER COOR TYPE 11548-CBM-075C 2 OF 2 B-5 RELIEF VALVE BOTTLED AIR SUPPLY TO PORV'S RELIEF VALVE 11548-CBM,075B 2 OF 2 B-3 AO GATE INSTRUMENT AIR SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-075J 1 OF 1 A-3 AO GATE INSTRUMENT AIR SUCTION FROM CONTAINMENT 11548-CBM-075J 1 OF 1 A-3 AO GATE INSTRUMENT AIR SUCTION FROM CONTAINMENT VALVE ASME SIZE CLASS CAT NC C
2.00 2
A 3.00 2
A 3.00 2
A ISO TEST VALVE POS TYPE 0
C CIV C.
CIV C
CIV TEST TYPE SP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP PAGE:
29 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-39 34 34 NC COLD ALT SHUT TEST csv-VNC-
 
VALVE NUMBER 2-LM-TV-200A 2-LM*TV*200B 2-LM-TV-200C 2-LM*TV-200D VIRGINIA PQ',/ER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRA\\JING SHEET DR\\JG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-OBSA 1 OF 2 B-6 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-6 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA
* 1 OF 2 B-5 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-5 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE VALVE ASME SIZE CLASS CAT 0.375 2
A 0.375 2
A 0.375 2
A 0.375 2
* A ISO TEST VALVE POS TYPE C
CIV C
CIV C
CIV C
CIV TEST TYPE EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP PAGE:
30 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-39 34 39 34 39 34 39 34 NC COLD ALT SHUT TEST csv-VNC-2-LM*TV-200E 2-LM-TV-200F 2*LM*TV-200G 11548-CBM-OBSA 1 OF 2 B-4 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-5 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-6 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 2
A 0.375 2
A 0.375 2
A C
CIV C
CIV C
CIV EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP 39 34 39 34 39 34
* VALVE NUMBER 2*LM-TV-200H DRAIJING SHEET NUMBER NUMBER 11548-CBM*OBSA 1 OF 2 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRIJG VALVE VALVE.
ASME COOR TYPE SI_ZE CLASS CAT B-7 AO GATE 0.375 2
A CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C
CIV EV FS LT ST VP PAGE:
31 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V*
CSV*
VNC-39 34
 
VALVE NUMBER 2-MS-087 VIRGINIA Pa.lER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAIJING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-064A 1 OF 6 C-6 MANUAL GATE MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP ISOLATION VALVE 4.0 2
B C
EV PAGE:
32 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV*
VNC-2-MS-120 11548-CBM-064A 2 OF 6 C-6 MANUAL GATE MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP ISOLATION VALVE 4.0 2
B C
EV 2-MS-158 2-MS-176.
2-MS-178 11548-CBM-064A 3 OF 6 C-6 MANUAL GATE MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP iSOLATION VALVE 11548*CBM-064A 4 OF 6 C-7 CHECK VALVE "A" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 11548*CBM-064A 4 OF 6 D-7 CHECK VALVE 118" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 4.0 2
3.00 2
3.00 2
B C
EV C
oc CV 42 C
QC CV 42 2-MS-182 11548-CBM*064A 4 OF 6 D-7 CHECK VALVE "C" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 3.00 2
C QC CV 42 2*MS*NRV-201A 2-MS*NRV-2018 2-MS*NRV-201C 2-MS-PCV-202A 11548-CBM-064A 1 OF 6 E-4 MO STOP CHECK "A" MAIN STEAM HEADER NON-RETURN VALVE 11548-CBM-064A 2 OF 6 D-3 MO STOP CHECK 11811 MAIN STEAM HEADER NON-RETURN VALVE 11548-CBM-064A 3 OF 6 D-3 MO STOP CHECK "C" MAIN STEAM HEADER NON-RETURN VALVE 11548-CBM-064A 4 OF 6 C-4 AO GATE MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 30.00 2
30.00 2
30.00 2
3.00 2
C C
C C
C C
B QC CV VP CV VP CV VP EV FS ST VP 48 48 48
 
VALVE NUMBER 2-MS-PCV-2028 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL JNSERVJCE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548*CBM-064A 4 OF 6 D*S AO GATE MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDWATER PUMP VALVE SIZE 3.00 ASME CLASS CAT 2
B TEST POS oc ISO VALVE TEST TYPE TYPE EV FS ST VP PAGE:
33 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-MS-RV-201A 2-MS-RV-201B 2-MS-RV-201C 2-MS-SV-201A 2-MS-SV-201B 2-MS-SV-201C 11548-CBM-064A 1 OF 6 E-5 AO ANGLE "A" MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 11548-CBM-064A 2 OF 6 E-6 AO ANGLE 11911 MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 11548-CBM-064A 3 OF 6 E-5 AO ANGLE "C" MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 11548-CBM-064A 1 OF 6 E-6 SAFETY VALVE "Au MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 2 OF 6 D-6 SAFETY VALVE 11911 MAIN STEAM HEADER SAFETY VALVE, SY DISCHARGE TO ATMOS 11548-CBM-064A 3 OF 6 D-6 SAFETY VALVE "C" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 4.00 2
4.00 2
4.00 2
4.00 2
4.00 2
4.00 2
B oc B
oc B
oc C
0 C
0 C
0
. EV FS ST VP EV FS ST VP EV FS ST VP SP SP SP 47 47 47 2-MS-SV-202A 2-MS-SV-2028 11548-CBM-064A 1 OF 6 E-6 SAFETY VALVE "Au MAIN STEAM HEADER SAFETY VALVE, SY DISCHARGE TO ATMOS 11548-CBM-064A 2 OF 6 D-5 SAFETY VALVE 11811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 6.00 2
6.00 2
C 0
SP C
0 SP
 
VALVE NUMBER 2_*MS*SV*202C 2*MS*SV-203A 2*MS*SV*203B 2*MS*SV-203C 2*MS*SV-204A 2*MS*SV*204B
* 2*MS*SV*204C 2-MS*SV-205A.
2*MS*SV*205B 2*MS*SV*205C 2*MS*TV-201A VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO
-DRAWING SHEET DRWG NUMBER NUMBER COOR VALVE TYPE VALVE SIZE ASME TEST VALVE TEST CLASS.CAT POS TYPE TYPE 11548*CBM*064A 3 OF 6 D-6 SAFETY VALVE 11C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 1 OF 6 E-6. SAFETY VALVE 11A11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO.ATMOS 11548-CBM*064A 2 OF 6 D-6 SAFETY VALVE 11811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGEE TO ATMOS 11548*CBM-064A 3 OF 6 D-6 SAFETY VALVE 11C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 1 OF 6 E-6 SAFETY VALVE 11A11 MAiN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 2 OF 6 D-6 SAFETY VALVE 11811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548*CBM*064A 3 OF 6 D-6 SAFETY VALVE "C" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548*CBM*064A 1 OF 6 E-5 SAFETY VALVE 11A" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM*D64A 2 OF 6 D-5 SAFETY VALVE 118" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548~CBM*D64A 3 OF 6 D-5 SAFETY VALVE 11C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 6.00 2
6.00 2
6.00 2
6.00 2
6.00 2
6.00 2
6.00 2
6.00 2
6.00 2
6.00 2
11548-CBM*D64A 1 OF 6 0*4 AO CHECK VALVE 30.00 2
11A11 MAIN S.TEAM HEADER TRIP VALVE C
0 C
0 C
0 C
0 C
0 C
0 C
0 C
0 C
0 C
0 B
C SP SP SP SP SP SP SP SP SP SP EV ST VP PAGE:
34 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*
CSV*
VNC-
 
VALVE NUMBER 2-MS-TV-201B 2-MS-TV-201C 2-MS-TV-209 2-HS-TV-210 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMaER COOR TYPE VALVE SIZE ASME CLASS 11548-CBM-064A 2 OF 6 C-4 AO CHECK VALVE 30.00 2
11B" MAIN STEAM HEADER TRIP VALVE 11548-CBM-064A 3 OF 6 C-4 AO CHECK VALVE 30.00 2
11C11 MAIN STEAM HEADER TRIP VALVE 11548-CBM-064A 4 OF 6 F-5 AO GATE
* MAIN STEAM HIGH PRESSURE DRAIN ISOLATION TO CONDENSER 11548-CBM-064A 4 OF 6 F-7 AO GATE MAIN STEAM HIGH PRESSURE DRAIN ISOLATION TO STEAM GENERATOR SLOWDOWN SYSTEM 3.00 2
2.00 2
CAT B
B B
B ISO TEST VALVE POS TYPE C
C C
C TEST TYPE EV ST VP EV ST VP EV FS ST VP EV FS ST VP PAGE:
35 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2-MS-TV-220 11548-CBM-064A 4 OF 6 C-4 AO GATE MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDWATER PUMP 3
B 0
EV ST VP
 
VALVE NUMBER 2-RC-160 VIRGINIA POWER COMPANY SURRY UNI.T 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRAWING NUMBER SHEET, DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASHE TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-0868 2 OF 3 D-7 CHECK. VALVE*
PRIMARY GRADE WATER SUPPLY TO PRESSURIZER RELIEF TANK 3.00 2
AC C
CIV CV LT PAGE:
36 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLO ALT REQ SHUT TEST v-csv-VNC*
44 2*RC*HCV*2556A 11548-CBM*086A 1 OF 3 E-8 AO PLUG LOOP FILL BOUNDARY VALVE 2.0.0 E
C VP 2-RC*HCV-2556B 11548*CBM-086A 2 OF 3 D-8 (10 PLUG LCX>P FILL BOUNDARY VALVE 2*RC*HCV-2556C
.11548-CBM-086A 3 OF 3 D-3 AO PLUG LOOP FILL BOUNDARY VALVE 2-RC*MOV-2535
* 11548*CBM-086B 1 OF 3 E-4 MO GATE BLOCK VALVE FOR PRESSURIZER Poi.lER OPERATED RELIEF VALVE 2.00 1
2.00 3.00 E
C E
C B
. OC VP VP.
EV ST VP 2-RC*MOV-2536 11548*CBM-086B 1 OF 3 D-4 MO GATE BLOCK VALVE FOR PRESSURIZER POIJER OPERATED RELIEF VALVE 3.00 B
oc EV ST VP 2*RC*PCV*2455C 11548-CBM*086B 1 OF 3 D-3 AO PLUG PRESSURIZER POWER OPERATED PRESSURE CONTROL VALVE DISCHARGE TO PRESSURIZER RELIEF TANK 3.00 BC OC EV FS ST VP 34 7
7 2*RC*PCV*2456 11548*CBM-086B 1 OF 3 E-3 AO PLUG PRESSURIZER POWER OPERATED PRESSURE CONTROL VALVE DISCHARGE *TO PRESSURIZER RELIEF TANK 2*RC*SOV-200A1 11548-CBM-086A 3 OF 3 B-5 SO GATE REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY 3.00 1.00 BC.
OC B
OC EV FS ST VP EV FS ST.
VP 34 31 31
~4 7
7
 
VALVE NUMBER 2-RC*SOV-200A2 DRAWING SHEET NUMBER NUMBER 11548-CBM-086A 3 OF 3 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE*
ASME COOR TYPE SIZE CLASS CAT A-5 SO GATE 1.00 8
REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY ISO TEST VALVE POS TYPE oc TEST TYPE EV FS ST VP PAGE:
37 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC*
31 31 34 2-RC-SOV-200B1 11548-CBM-086A 3 OF 3 8-5 SO GATE REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY 1.00 B
oc EV FS ST VP 31 31 34 2-RC-SOV-20082 11548-CBM-086A 3 OF 3 A-5 SO GATE 2-RC-SV-2551A REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY 11548-CBM-0868 1 OF 3 E-6 SAFETY VALVE PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK 1.00 6.00 B
oc C
0 EV FS ST VP SP 31 31 34 2-RC-SV*2551B 11548-CBM-0868 1 OF 3 E-5 SAFETY VALVE PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK 6.00 C
0 SP 2*RC-SV*2551C 11548-CBM-0868 1 OF 3 E-5 SAFETY VALVE PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK 6.00 C
* 0 SP 2-RC*TV*2519A 11548-CBM-0868 2 OF 3 D-7 AO GATE PRIMARY GRADE WATER SUPPLY TO PRT*#2 RCP SEAL STANDPIPES & FLUSH CONNECT, OUT CONT ISO VLV 3.00 2
A C
CIV EV FS LT ST VP
 
VALVE NUMBER 2-RH-005 DRAIJING SHEET NUMBER NUMBER 11548-CBM-087A 1 OF 2 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRIJG VALVE VALVE ASHE
* TEST COOR TYPE SIZE CLASS CAT* POS E*S CHECK VALVE 10.00 2
C QC "B" RHR PUMP DISCHARGE CHECK VALVE ISO VALVE TEST TYPE TYPE CV PAGE:
38 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ.SHUT TEST V-CSV-VNC-8 2-RH-011 2-RH-047 2-RH-FCV-2605 2-RH*HCV-2758 2-RH*MOV-200 11548-CBM-087A. 1 OF 2 E-7 CHECK VALVE "A" RHR PUMP DISCHARGE CHECK VALVE 11548-CBM-087A 2 OF 2 C-3 CHECK VALVE RHR DISCHARGE TO LOOP 2 COLD LEG CHECK VALVE 11548-CBM~087A 2 OF 2 C-7 AO BFLY RHR HEAT EXCHANGERS BYP~SS FLOIJ CONTROL VALVE 11548-CBM-087A 2 OF 2 C-5 AO BFLY RHR HEAT EXCHANGERS DISCHARGE FLOIJ CONTROL VALVE 11548*CBM-087A. 2 OF 2 E-3 MO GATE RHR SUPPLY ISOLATION TO REFUEL IJATER STORAGE TANK, OUTSIDE CONTAINMENT ISOLATION VALVE
* 10.00 2
10.00 1
12.00 2
12.00 2
6.00 2
C QC C
0 B
C B
0 AE C
CIV CV CV EV FS ST EV FS ST LT 47 47 8
8 14 14 14 14 2-RH*MOV-2700 2-RH-MOV-2701 115~8-CBM-087A 1 OF 2 A-5 MO GATE RHR PUMP SUPPLY ISOLATION FROM RC LOOP 1 HOT LEG 11548-CBM-087A 1 OF 2 A-4 MO GATE RHR PUMP SUPPLY ISOLATION FROM RC LOOP 1 HOT LEG 2*RH*MOV-2720A 11548-CBM-087A 2 OF 2 C-3 MO GATE RHR RETURN ISOLATION TO 118 11 ACCUMULATOR DISCHARGE LINE 2-RH*MOV-2720B 11548-CBM-087A 2 OF 2 B-3 MO GATE RHR RETURN ISOLATION TO 11C11 ACCUMULATOR DISCHARGE LINE 14.00 14.00 10.00 10.00 B
0 B
0 B
0 B
0 EV ST VP EV ST VP EV ST VP EV ST VP 9
9 10 10
 
VALVE NUMBER 2-RH-RV-2721 DRAWING SHEET NUMBER NUMBER 1154S-CBM-087A 2 OF 2 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG
* VALVE VALVE COOR TYPE SIZE D-4 RELIEF VALVE 3 *. 00 ASME CLASS 2
ISO TEST VALVE TEST CAT PCS TYPE TYPE C
0 SP RHR SYSTEM RELIEF VALVE PAGE:
39 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-
 
VALVE NUMBER 2-RL-003 2-RL-005 2-RL-013 2-RL-015 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11448-CBM-118A 3 OF 3 D-7 MAN DIAPHRAGM REFUELING PURIFICATION FROM RP PUMPS TO REACTOR CAVITY, OUTSIDE CONT ISOLATION VALVE 11448-CBM-118A 3 OF 3 D-6 MAN DIAPHRAGM REFUELING PURIFICATION FROM RP PUMPS TO REACTOR CAVITY, INSIDE CONT ISOLATION VALVE 11448-CBM-118A 3 OF 3 B-7 MAN DIAPHRAGM REFUELING PURIFICATION FROM REACTOR CAVITY TO RP PUMPS, INSIDE CONT ISOLATION VALVE 11448-CBM-118A 3 OF 3 B-7 MAN DIAPHRAGM REFUELING PURIFICATION FROM REACTOR *CAVITY TO RP PUMPS, OUTSIDE CONT ISOLATION VALVE VALVE ASME TEST SIZE CLASS CAT POS 3.00 2
AE C
3.00 2
AE C
3.00 2
AE C
3.00 2
AE C
ISO VALVE TYPE CIV CIV CIV CIV TEST TYPE LT LT LT LT PAGE:
40 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-39 39
 
VALVE NUMBER 2-RM-003 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAIJING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBP-014B 1 OF 1 B-5 CHECK VALVE RETURN TO CONTAINMENT FROM RADIATION MONITOR-ING CABINET, INSIDE CONT !SOL CHECK VALVE 0.75 2
AC C
CIV CV LT PAGE:
41 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-44 2-RM-TV-200A 2-RM-TV-200B 11548-CBP-014B 1 OF 1 B-4 AO GATE RETURN ISOLATION FROM AIR RADIATION MONITOR TO CONTAINMENT, OUTSIDE CONT ISOLATION VALVE 11548-CBP-014B OF F-8 AO GATE SUPPLY !SOL TO AIR RAD MONITOR FROM CONTAIN-MENT VENT DUCT, OUTSIDE CONT ISOLATION VALVE 0.75 2
A C
0.75. 2 A*
C CIV CIV EV FS LT ST VP EV FS LT ST VP 34 34 2-RM-TV-200C 11548-CBP-014B 1 OF 1 E-8 AO GATE SUPPLY !SOL TO AIR RAD MONITOR FROM.CONTAIN-MENT VENT DUCT, l~SIDE CONT ISOLATION VALVE 0.75 2
A C*
CIV EV FS LT ST VP 34
 
VALVE NUMBER 2-RS-011 2-RS-017 VIRGINIA POl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-0848 2 OF 2 E-5 CHECK VALVE 10.00 2
AC "B" OUTSIDE RECIRC SPRAY PUMP INSIDE CONTAINMENT ISOLATION CHECK VALVE TEST POS oc 11548-CBM-084B 2 OF 2 D-5 CHECK VALVE 10.00 2
AC OC "A" OUTSIDE RECIRC SPRAY PUMP INSIDE CONTAINMENT ISOLATION CHECK VALVE ISO VALVE TYPE CIV CIV TEST TYPE CV LT CV LT PAGE:
42 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-43 43 2-RS-046 2-RS-053 11548-CBM-084B 2 OF 2 A-6.
MAN GATE OUTSIDE RECIRC SPRAY PUMP*SUCTION BYPASS LINE ISOLATION VALVE 11548-CBM-0848 2 OF 2 B-6 MAN GATE OUTSIDE RECIRC SPRAY PUMP SUCTION BYPASS LINE ISOLATION VALVE 2
AE C
2 AE C
CIV LT 39 CIV LT 39 2-RS*MOV-255A 2-RS*MOV*255B 2-RS*MOV-256A 2-RS*MOV*256B 11548-CBM-084B 2 OF 2 B-6 MO PLUG "A" OUTSIDE RECIRC SPRAY PUMP SUCTION ISOLAT VALVE FROM CONTAINMENT SUMP 11548-CBM-084B 2 OF 2 B-6 MO PLUG "B". OUTSIDE REC I RC SPRAY PUMP SUCTION ISOLAT VALVE FROM CONTAINMENT SUMP 11548-CBM-084B 2 OF 2 D-6 MO BFLY 11A11 OUTSIDE RECIRC SPRAY PUMP DISCHARGE ISO*
LATION, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*0S4B 2 OF 2 E-6 MO BFLY "A" OUTSIDE RECIRC SPRAY PUMP DISCHARGE ISO*
LATION, OUTSIDE CONTAINMENT ISOLATION VALVE 12.00 2
12.00 2
10.00 2
10.00 2
A CC A
CC A
CC A
CC CIV EV LT ST VP CIV EV CIV CIV LT ST
. VP EV LT ST VP EV LT ST VP 39 39 1  


VIRGINIA POWER COMPANY                               PAGE:  24 OF 63 SURRY UNIT 2                                   REVISION: 03 SECOND INSPECTION INTERVAL                             DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO             REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE                 VALVE ASHE        TEST VALVE   TEST   REQ SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE                SIZE   CLASS CAT   POS TYPE   TYPE   v- csv- VNC*
VALVE NUMBER 2-RT-02 2-RT-06 2-RT-21 2-RT-25 2-RT-40 2-RT-44 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAlollNG NUMBER SHEET DRlolG VALVE NUMBER COOR TYPE VALVE.
2-FW-FCV-2488    11548-CBM-068A    1  Of 4 D-4    AO GATE            14-00 NC    B    C            EV          28 FS          28 ST VP MAIN FEEDWATER REGULATING VALVE 2-FW-FCV-2498    11548-CBM*068A    1 OF 4 B-4    AO GATE            14.00 NC    B    C            EV          28 FS .        28 ST VP MAIN FEEDWATER REGULATING VALVE 2-FW*HCV*255A    11548-CBM-068A    1 OF 4 F-3    AO GATE            4.00 NC    B    C            EV*          28 FS          28 ST
ASME TEST VALVE TEST SIZE CLASS CAT POS TYPE TYPE 11548-CBM-124A 1.OF 4. E-7 MANUAL GLOBE STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 1 OF 4 E-6 MANUAL GLOBE STEAM GENERATOR RECIRCULATION OUTSIDE
                                                                                                    . VP
,CONTAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 E-7 MANUAL GLOBE STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 E-6 MANUAL GLOBE  
                  *MAIN FEEDWATER REGULATING VALVE BYPASS VALVE 2*FW*HCV*255B    11548-CBM~068A    1 OF 4 D-3    AO GATE            4.00 NC    B    C            EV          28 FS .        28
'STEAM GENERATOR RECIRCULATION OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 3 OF 4 E-7 MANUAL GLOBE STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 3 0: 4 E-6 MANUAL GLOBE STEAM GENERATOR RECIRCULATION OUTSIDE CONTAINMENT ISO~ATION VALVE 3_00 2
* ST VP MAIN FEEDWATER REGULATING VALVE BYPASS VALVE 2*FW*HCV*255C    11548-CBM*068A    1 OF 4 C-3    AO GATE            4.00 NC    B    C            EV          28 FS          28 ST VP MAIN FEEDWATER REGULATING VALVE BYPASS VALVE
AE C
                                      .
LT 3.00 2
  --------------------------------------------------------------------------------------------------------------------------
* AE C
                                                                                                            .
LT 3.00 2
2*FW*MOV*251A    11548-CBM*068A 1 OF 4 B-7 MO GLOBE                  3.00 2     B    oc          EV ST VP NORMAL AUXILIARY FEEDWATER SUPPLY TO "C" STEAM GENERATOR 2-FW*MOV-251B    11548*CBM*068A    1 OF 4 B-7    MO GLOBE           3.00 2      B    oc          EV ST VP STANDBY AUXILIARY FEEDWATER SUPPLY TO 11 C11
AE C
* STEAM GENERATOR
LT 3.00 2
                            .                                                                            -
AE C
  ----------------------------------------**---------------------------------------------------------------------------------
LT 3.00 2
2-FW*MOV*251C    11548-CBM-068A 1 OF 4 B-6 MO GLOBE                   3.00 2      B    oc          EV ST VP STANDBY AUXILIARY FEEDWATER SUPPLY TO "B" STEAM GENERA TOR
AE C
* VIRGINIA POIJER COMPANY                            PAGE:  25 OF 63 SURRY UNIT 2                                REVISION: 03
LT 3.00 2
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD ALT VALVE          . DRAWING          SHEET DRWG VALVE                VALVE. ASHE      TEST VALVE TEST    REQ  SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE                SIZE  CLASS CAT  P.OS TYPE  TYPE    v-  csv- VNC-2-FW-MOV-251D    11548-CBM-068A    1 OF 4 B-6   MO GLOBE                 2    B    oc          EV ST VP NORMAL AUXILIARY FEEDWATER SUPPLY TO "B" STEAM GENERATOR
AE C
  --------------------------------------------------------------------------------------------------------------------------
LT PAGE:
2-FW-MOV-251E    11548-CBM-068A    1 OF 4 B-6    MO GLOBE            3.00 2     B    oc          EV ST VP STANDBY AUXILIARY FEEDIJATER SUPPLY TO "A" STEAM GENERATOR, 2-FW-MOV-251F    11548-CBM-068A    1 OF 4 B-5    MO GLOBE            3.00 2     B    oc          EV ST VP STANDBY AUXILIARY FEEDWATE.R SUPPLY TO 11A11 STEAlil GENERATOR 2-FW-MOV-260A    11448-CBM-068A    3 OF 4 F-7    MO GLOBE            6.00 3    B    0          EV ST VP CROSS - CONNECT FOR UNIT 1 AUXILIARY FEED-
43 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V-CSV-VNC-
* WATER FROM UNIT 2 2-FW-MOV-260B    11448-CBM-068A    3 OF 4 F-7    MO GLOBE            6.00 3    B    o          EV ST VP CROSS - CONNECT FOR UNIT 1 AUXILIARY FEED-WATER. FROM UNIT 2
* VIRGINIA POIJER COMPANY                              PAGE:   26 OF 63 SURRY UNIT 2                                      REVISION: 03
**                                                      SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL COLD   AP VALVE            DRAWING          SHEET DRWG VALVE              VALVE    ASME      TEST VALVE TEST      REQ SHUT   TEST NUMBER          NUMBER            NUMBER COOR TYPE              SIZE      CLASS CAT  POS TYPE TYPE        v-   csv-   VNC*
                                                                                                              --- --- -
2-GW*TV-200      11448*CBM*090C    1 OF 1 C-4    SO GATE          0.375    2    A    C      CIV    EV FS LT ST      34 VP
                    -------------------------- *------------------
SUCTION LINE TO HYDROGEN ANALYZER* UNIT 1 2-GW*TV-201      l1448*CBM-090C    1 OF 1 C-4    SO GATE          0.375    2    A    C      CIV    EV FS LT ST      34 VP SUCTION LINE TO HYDROGEN ANALYZER* UNIT 1 2-GW*TV-202      11448*CBM-090C    1 OF 1 B-4    SO GATE          0.375    2    A    C      CIV    EV FS LT ST      34 VP DISCHARGE LINE TO HYDROGEN ANALYZER* UNIT 1
* 2*GW*TV*203      11448*CBM-090C    1 OF 1 B-4    SO GATE DISCHARGE LINE TO HYDROGEN ANALYZER* UNIT 1 0.375    2    A    C      CIV    EV FS LT ST VP 34 2-GW*TV*204      11448*CBM-090C    1 OF 1 E-4    SO GATE          0.375    2    A    C      CIV    EV FS LT ST      34 SUPPLY TO UNIT 2 HYDROGEN ANALYZER, OUTSIDE VP I
CONTAINMENT ISOLATION VALVE 2*GW*TV*205      11448*CBM-090C    1 OF 1 E-4 . SO GATE          0.375    2    A    C      CIV    EV FS LT ST      34 VP SUPPLY TO UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE
  ------------------------------.
2-GW*TV-206
                                  *--------------------------------------------------------*----------------------------------
11448-CBM*090C 1 OF 1 D-4 SO GATE                0.375 2                    CIV A    C            EV FS LT ST      34 VP
* RETURN FROM UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE


VIRGINIA PO\IER COMPANY                            PAGE:  27 OF 63 SURRY UNIT 2                                    REVISION: 03
VALVE NUMBER 2-SA-081 2-SA-082 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM-075E 1 OF 1 B-6 MAN GATE SERVICE AIR SUPPLY TO UNIT 1 CONTAINMENT, INSIDE CONTAINMENT ISOLATION VALVE VALVE SIZE*
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD ALT VALVE            DRAWING          SHEET DRWG VALVE              VALVE    ASHE      TEST VALVE TEST      REQ  SHUT TEST NUMBER           NUMBER          NUMBER COOR TYP.E              SIZE      CLASS CAT POS TYPE TYPE        v-  csv- VNC*
2.00 ASHE CLASS CAT 2
                                            ----.
AE TEST POS C
2-GW-TV-207      11448-CBM-090C  1 OF 1 D-4    SO GATE          0.375    2    A  C    CIV    EV FS LT ST      34 VP RETURN FROM UNIT 2 HYDROGEN ANALYZER, OUTSIDE I
11548-CBM-O?SE 1 OF*1 B-6 MAN GATE SERVICE AIR SUPPLY TO UNIT 1 CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2
CONTAINMENT ISOLATION VALVE 2-GW*TV-211A    11448*CBM-090C  1 OF 1 F-3    SO GATE          0.375    2    A  C    CIV  *EV FS LT ST      34 VP UNIT 1 SAMPLE LINE TO AIR SAMPLE PANEL, INSIDE CONTAINMENT ISOLATION VALVE 2-GW-TV-2118    11448-CBM-090C  1 OF 1 F-3    SO GATE          0.375    2     A  c. CIV    EV FS .
AE C
LT ST      34 VP UNIT 1 SAMPLE LINE TO AIR SAMPLE PANEL, OUTSIDE CONTAINMENT ISOLATION VALVE
ISO VALVE TEST TYPE TYPE CIV LT CIV LT PAGE:
* -------------------------------~---------------*----------------------------------------------------------------------* ---
44 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-
* VIRGINIA PO'JER COMPANY                           PAGE:    28 OF .63 SURRY UNIT 2                                   REVISION: 03
* SECOND INSPECTION INTERVAL                           DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO          REL COLD ALT VALVE            DRAWING           SHEET DRWG . VALVE            VALVE     ASHE      TEST VALVE TEST    REQ SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE               SIZE      CLASS CAT  POS TYPE TYPE      v- csv- VNC-2-IA-381          11548-FM -075C  2 OF 2 B-6    CHECK VALVE        0.75  NC    AC  C          CV LT
                    ---------------------------------- *----------.
BOTTLED AIR SUPPLY TO 2-RC-PCV-2456 ISOLATION CHECK VALVE 2-IA-384        11548-FM -075C    2 OF 2 B-5    CHECK VALVE        0.75  NC    AC  C          CV LT
                  ------- *------------------.------------------
BOTTLED AIR SUPPLY TO 2-RC-PCV-2455C ISOLATION CHECK VALVE 2- IA-395        11548-FM -075C    2 OF 2. B-6    CHECK VALVE        0.75  NC    C    0          CV BOTTLED AIR SUPPLY TO 2-RC-PCV-2456 SUPPLY CHECK VALVE 2-IA-396        11548-FM -075C    2 OF 2 B-5    CHECK VALVE        O. 75  NC    C    0          CV BOTTLED AIR SUPPLY TO 2-RC-PCV-2455C SUPPLY CHECK VALVE 2-IA-446        11448-CBM-075C    1 OF 4 D-7    MAN GATE          2.00  2. AE  C    CIV    LT BACKUP INSTRUMENT AIR TO CONTAINMENT FROM UNIT 2
* 2-IA-704 2-IA-864 11548-CBM-075B UNIT 2    .
11548-CB~-075C 2 OF 2 C-3 1 OF 2 E-3 MAN.GATE BACKUP INSTRUMENT AIR TO CONTAINMENT FROM CHECK VALVE 2.00 2.00 2
2 AE AC C
C CIV CIV LT CV LT 39 44 INS1RUMENT AIR SUPPLY TO CONTAINMENT, INSIDE CONTAINMENT ISOLATION CHECK VALVE 2-IA-868        11548-CBM-075C    1 OF 2 E-3    CHECK VALVE        2.00  2    AC  C    CIV  CV      44 LT INSTRUMENT AIR SUPPLY TO CONTAINMENT, INSIDE CONTAINMENT ISOLATION CHECK VALVE 2-IA-947        11548-FM -0750    1 OF 1 B-7    CHECK VALVE       0.5    NC    AC  C          CV LT BOTTLED AIR SUPPLY TO 2-MS-SOV-202A,B ISOLATION CHECK VALVE      .
  -------*----------------------------------------------------------------------------------------------------------*
2-IA-948        11548-FM -075D    1 OF 1 9-8 CHECK VALVE            0.5    NC    C    0          CV
                                                                                                                      -------
BOTTLED AIR SUPPLY TO 2-MS-SOV-202A,B SUPPLY CHECK VALVE 2-IA-RV-210      11548-CBM-075C    2 OF 2 B-6    RELIEF VALVE              NC    C*  0          SP BOTTLED AIR SUPPLY TO PORV'S RELIEF VALVE
* VIRGINIA POWER COMPANY                          PAGE:  29 OF 63 SURRY UNIT 2                               REVISION: 03
* SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE.TESTING PROGRAM - VALVE TABLE NC ISO        REL  COLD ALT VALVE        DRAIJING        SHEET DRIJG VALVE              VALVE  ASME        TEST VALVE TEST REQ  SHUT TEST NUMBER      NUMBER          NUMl!ER COOR TYPE              SIZE    CLASS  CAT POS TYPE TYPE    v-  csv- VNC-2-IA-RV-211  11548-CBM-075C  2 OF 2 B-5    RELIEF VALVE            NC    C   0          SP
              ---------------------------------------------
BOTTLED AIR SUPPLY TO PORV'S RELIEF VALVE 2-IA-TV-200  11548-CBM,075B  2 OF 2 B-3    AO GATE           2.00  2      A    C    CIV  EV FS LT  39 ST  34 VP INSTRUMENT AIR SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 2-IA-TV-201A 11548-CBM-075J  1 OF 1 A-3    AO GATE            3.00 2     A    C. CIV   EV FS LT ST VP INSTRUMENT AIR SUCTION FROM CONTAINMENT 2-IA-TV*201B 11548-CBM-075J  1 OF 1 A-3    AO GATE            3.00  2      A    C    CIV   EV FS LT
* ST  34 VP INSTRUMENT AIR SUCTION FROM CONTAINMENT
* VIRGINIA PQ',/ER COMPANY                              PAGE:   30 OF 63 SURRY UNIT 2                                      REVISION: 03
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRA\JING          SHEET DR\JG VALVE              VALVE    ASME      TEST  VALVE  TEST    REQ SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE              SIZE      CLASS CAT  POS  TYPE  TYPE    v- csv- VNC-2-LM-TV-200A      11548-CBM-OBSA  1 OF 2 B-6    AO GATE          0.375    2    A    C    CIV    EV FS LT      39 ST      34 VP CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 2-LM*TV*200B    11548-CBM-OBSA    1 OF 2 B-6    AO GATE          0.375    2    A    C    CIV    EV FS LT      39 ST      34 VP CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 2-LM-TV-200C    11548-CBM-OBSA
* 1 OF 2 B-5    AO GATE          0.375    2    A    C    CIV    EV FS LT      39 ST      34 VP CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE
* 2-LM*TV-200D    11548-CBM-OBSA    1 OF 2 B-5    AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375    2*    A    C    CIV    EV FS LT ST VP 39 34
  --------------------* --------------------------------------*---------------------------------------------------------------
2-LM*TV-200E    11548-CBM-OBSA    1 OF 2 B-4    AO GATE          0.375    2    A    C    CIV    EV FS LT      39 ST      34 VP CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 2-LM-TV-200F    11548-CBM-OBSA    1 OF 2 B-5    AO GATE          0.375    2    A    C    CIV    EV FS LT      39 ST      34 VP CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 2*LM*TV-200G    11548-CBM-OBSA    1 OF 2 B-6    AO GATE          0.375    2    A    C    CIV    EV FS LT      39 ST      34 VP
* CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE


VIRGINIA PO\JER COMPANY                        PAGE:  31 OF 63 SURRY UNIT 2                              REVISION: 03
VALVE NUMBER 2-SI-025 DRAWING SHEET NUMBER NUMBE~
* SECOND INSPECTION INTERVAL                      DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO        REL  COLD ALT VALVE        DRAIJING        SHEET DRIJG VALVE              VALVE. ASME      TEST VALVE TEST REC  SHUT TEST NUMBER      NUMBER           NUMBER COOR TYPE              SI_ZE    CLASS CAT POS  TYPE  TYPE V*  CSV* VNC-2*LM-TV-200H 11548-CBM*OBSA  1 OF 2 B-7    AO GATE          0.375    2    A  C    CIV  EV FS LT  39 ST  34 VP CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE
11548-CBM*089A 1 OF 3 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COQR TYPE SIZE CLASS CAT E-5 CHECK VALVE 8.00 2
*
C RWST SUPPLY CHECK VALVE TO CHARGING PUMP SUCTION HEADER ISO TEST VALVE TEST POS TYPE TYPE oc CV  
* VIRGINIA Pa.lER COMPANY                                 PAGE:  32 OF 63 SURRY UNIT 2                                         REVISION: 03
. PAGE:
* SECOND INSPECTION INTERVAL                                 DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAIJING            SHEET DRIJG VALVE               VALVE     ASME         TEST VALVE  TEST    REQ SHUT TEST NUMBER          NUMBER              NUMBER COOR TYPE               SIZE       CLASS CAT     POS TYPE    TYPE    V-   CSV* VNC-2-MS-087        11548-CBM-064A      1 OF 6 C-6      MANUAL GATE        4.0      2      B    C            EV MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP ISOLATION VALVE
45 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-28 2-Sl-032 2-Sl-046A 2-Sl-046B 11548-CBM-0898 1 OF 4 E-3 MAN GLOBE ACCUMULATOR MAKEUP LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*089A 1 OF 3 A-3 CHECK VALVE RWST SUPPLY CHECK VALVE TO 11A11 LOW HEAD SI PUMP SUCTION 11548*CBM*089A 1 OF 3 B-3 CHECK VALVE RWST SUPPLY CHECK VALVE TO "B" LOW HEAD SI PUMP SUCTION 1.00 2
  ------------------------------------------------------------------------------------------------------------*
12.00 2
2-MS-120        11548-CBM-064A 2 OF 6 C-6 MANUAL GATE                  4.0    2        B    C            EV
12.00 2
                                                                                                                        -------------
AE C
MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP ISOLATION VALVE
CIV LT C
  -----------------------------------------------------------------------
0 CV 21 C
2-MS-158        11548-CBM-064A 3 OF 6 C-6 MANUAL GATE                  4.0
0 CV 21 2-Sl-047 2-Sl~OSO 2*Sl*053 11548-CBM-089A 1 OF 3 B-5 CHECK VALVE 11811 LOIJ HEAD SI PUMP SUCTION CHECK VALVE FROM CONTAINMENT SUMP 11548*CBM*089A 1 OF 3 C-4 CHECK VALVE 11811 LO'J HEAD_ SI PUMP DISCHARGE CHECK VALVE 11548-CBM-089A 2 OF 3 8*4 CHECK VALVE NBN LO'J HEAD SI PUMP MINIMUM FLOW/TEST LINE DISCHARGE CHECK VALVE 12.00 2
                                                                                *--2 *-----------------------------------------------
10.00 2
B    C            EV MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP iSOLATION VALVE 2-MS-176.        11548*CBM-064A      4 OF 6 C-7      CHECK VALVE        3.00    2      C    oc          CV      42 "A" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 2-MS-178        11548*CBM-064A      4 OF 6 D-7      CHECK VALVE        3.00    2      C    QC          CV      42 11 8" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP
_ 2.00 2
  ---------------------------------------------------------------------------------------*-----------------------------------
C 0
QC 2-MS-182        11548-CBM*064A      4 OF 6 D-7      CHECK VALVE        3.00   2       C                CV      42
CV 20 C
* 2*MS*NRV-201A "C" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY
oc
                                          . FEEDIJATER
* CV 21 C
                                                  .
0 CV 2*Sl*OS6 2-Sl-061 2*Sl*073 2-SI -079 -
11548-CBM-064A 1 OF 6 E-4 MO STOP CHECK "A" MAIN STEAM HEADER NON-RETURN VALVE PUMP
11548*CBM*089A 1 OF 3 B-7 CHECK VALVE "A" LOW HEAD SI PUMP SUCTION CHECK VALVE FROM CONTAINMENT SUMP 11548*CBM*089A 2 OF 3 8*5 CHECK VALVE "A" LO'J.HEAD SI PUMP MINIMUM FLOW/TEST LINE DISCHARGE CHECK VALVE 11548*CBM*089A. 2 OF 3 E*7 MAN GLOBE ACCUMULATOR TEST LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*089B 4*0F 4 F-7 CHECK VALVE RC_S COLD LEG SI ADMISSION CHECK VALVE 12.00 2
  --------------------------------------------------------------------------------------------------------------------------
2.00 2
30.00 2            C    C            CV VP 48 2-MS*NRV-2018    11548-CBM-064A      2 OF 6 D-3      MO STOP CHECK    30.00    2        C    C            CV      48 VP 11 811 MAIN STEAM HEADER NON-RETURN VALVE 2-MS*NRV-201C    11548-CBM-064A      3 OF 6 D-3      MO STOP CHECK    30.00      2      C    C            CV     48 VP "C" MAIN STEAM HEADER NON-RETURN VALVE 2-MS-PCV-202A    11548-CBM-064A      4 OF 6 C-4      AO GATE            3.00    2        B    QC          EV FS ST VP MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP
0.75 2
* VIRGINIA POWER COMPANY                                PAGE: 33 OF 63
6.00 1
* SURRY UNIT 2                                      REVISION: 03 SECOND INSPECTION INTERVAL                              DATE: 3/19/92 JNSERVJCE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING            SHEET DRWG VALVE                VALVE    ASME        TEST VALVE TEST      REQ SHUT TEST NUMBER          NUMBER              NUMBER COOR TYPE                SIZE      CLASS CAT POS TYPE TYPE          v- csv- VNC-2-MS-PCV-2028    11548*CBM-064A      4 OF 6 D*S      AO GATE            3.00  2     B    oc            EV FS ST VP MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDWATER PUMP
C 0
  --------------------------------------------------------------------------------------------------------------------------
C 0
2-MS-RV-201A    11548-CBM-064A 1 OF 6 E-5 AO ANGLE                    4.00 2        B    oc          . EV FS ST    47 VP "A" MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 2-MS-RV-201B    11548-CBM-064A      2 OF 6  E-6    AO ANGLE          4.00  2      B    oc            EV FS ST    47 VP 11 911 MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 2-MS-RV-201C    11548-CBM-064A      3 OF 6  E-5    AO ANGLE          4.00  2      B    oc            EV
AE C
* FS ST    47 VP "C" MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 2-MS-SV-201A    11548-CBM-064A      1 OF 6 E-6      SAFETY VALVE       4.00  2      C    0            SP "Au MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 2-MS-SV-201B    11548-CBM-064A      2 OF 6 D-6      SAFETY VALVE       4.00  2      C    0            SP 11 911 MAIN STEAM HEADER SAFETY VALVE, SY DISCHARGE TO ATMOS 2-MS-SV-201C    11548-CBM-064A      3 OF 6 D-6      SAFETY VALVE      4.00  2      C    0            SP "C" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS
CIV AC OC PIV CV CV LT CV LT 20 27
  ----------------------------------------.-----------------
2-MS-SV-202A    11548-CBM-064A 1 OF 6 E-6 SAFETY VALVE
                                                                  *---------------------------------------------------------------
6.00 2       C    0            SP "Au MAIN STEAM HEADER SAFETY VALVE, SY DISCHARGE TO ATMOS 2-MS-SV-2028    11548-CBM-064A      2 OF 6 D-5      SAFETY VALVE      6.00   2     C    0            SP 11811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS
* VIRGINIA POWER COMPANY                        PAGE: 34 OF 63
* SURRY UNIT 2                              REVISION: 03 SECOND INSPECTION INTERVAL                      DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO        REL COLD ALT VALVE        -DRAWING              SHEET DRWG VALVE              VALVE    ASME      TEST VALVE TEST REQ SHUT TEST NUMBER        NUMBER              NUMBER COOR TYPE              SIZE    CLASS .CAT POS  TYPE TYPE  V* CSV* VNC-2_*MS*SV*202C  11548*CBM*064A      3 OF 6 D-6    SAFETY VALVE      6.00   2     C   0          SP
                ---------------------------------------------
C MAIN STEAM HEADER SAFETY VALVE, SV 11 11 DISCHARGE TO ATMOS 2*MS*SV-203A  11548-CBM-064A      1 OF 6 E-6. SAFETY VALVE        6.00  2      C  0         SP 11 A11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO.ATMOS 2*MS*SV*203B  11548-CBM*064A      2 OF 6 D-6    SAFETY VALVE      6.00  2      C  0          SP 11 811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGEE TO ATMOS 2*MS*SV-203C  11548*CBM-064A      3 OF 6 D-6    SAFETY VALVE      6.00  2      C  0          SP 11 C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 2*MS*SV-204A  11548-CBM-064A      1 OF 6 E-6    SAFETY VALVE      6.00  2      C  0          SP
                ---------------------------- *----------------
A MAiN STEAM HEADER SAFETY VALVE, SV 11 11 DISCHARGE TO ATMOS 11548-CBM-064A      2 OF 6 D-6    SAFETY VALVE      6.00  2                    SP
* 2*MS*SV*204B                                                                      C  0 11 811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 2*MS*SV*204C  11548*CBM*064A      3 OF 6 D-6    SAFETY VALVE     6.00  2      C  0          SP "C" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 2-MS*SV-205A. 11548*CBM*064A      1 OF 6 E-5    SAFETY VALVE      6.00  2      C  0          SP 11 A" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 2*MS*SV*205B  11548-CBM*D64A      2 OF 6 D-5    SAFETY VALVE      6.00  2      C  0          SP 11 8" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 2*MS*SV*205C  11548~CBM*D64A      3 OF 6 D-5    SAFETY VALVE      6.00  2      C   0          SP 11 C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 2*MS*TV-201A  11548-CBM*D64A      1 OF 6 0*4   AO CHECK VALVE   30.00  2      B  C          EV ST VP
                *------------------------------------------.--
11 A11 MAIN S.TEAM HEADER TRIP VALVE
* VIRGINIA POWER COMPANY                                PAGE:  35 OF 63 SURRY UNIT 2                                      REVISION: 03
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD ALT VALVE            DRAWING            SHEET DRWG VALVE              VALVE    ASME        TEST VALVE TEST      REQ  SHUT TEST NUMBER            NUMBER              NUMaER COOR TYPE              SIZE      CLASS CAT  POS TYPE TYPE        v-  csv- VNC-2-MS-TV-201B      11548-CBM-064A      2 OF 6 C-4     AO CHECK VALVE   30.00    2      B    C            EV ST VP 11 B" MAIN STEAM HEADER TRIP VALVE 2-MS-TV-201C      11548-CBM-064A      3 OF 6 C-4    AO CHECK VALVE   30.00   2     B    C            EV ST VP 11 C11 MAIN STEAM HEADER TRIP VALVE 2-MS-TV-209      11548-CBM-064A      4 OF 6  F-5    AO GATE          3.00   2     B    C            EV FS ST VP
* MAIN STEAM HIGH PRESSURE DRAIN ISOLATION TO CONDENSER 2-HS-TV-210      11548-CBM-064A      4 OF 6  F-7    AO GATE            2.00   2     B    C            EV FS ST      34 VP
* MAIN STEAM HIGH PRESSURE DRAIN ISOLATION TO STEAM GENERATOR SLOWDOWN SYSTEM
  -----------------------------------------------------------------
2-MS-TV-220      11548-CBM-064A 4 OF 6 C-4 AO GATE MAIN STEAM SUPPLY TRIP VALVE TO TURBINE
                                                                        *------------------------------------
3      B    0           EV ST VP
                                                                                                              *-------------------
DRIVEN AUXILIARY FEEDWATER PUMP
  ----------------------* ---------------------------------------------------------------------------------------*-----------
* VIRGINIA POWER COMPANY                              PAGE: 36 OF 63 SURRY UNI.T 2                                   REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL COLO ALT VALVE              DRAWING          SHEET , DRWG VALVE              VALVE    ASHE        TEST VALVE  TEST    REQ SHUT TEST NUMBER            NUMBER            NUMBER COOR TYPE                SIZE    CLASS CAT POS    TYPE    TYPE    v-  csv- VNC*
2-RC-160          11548-CBM-0868    2 OF 3 D-7    CHECK. VALVE*     3.00  2     AC    C    CIV    CV      44 LT
                      ------------------------------------ *--------
PRIMARY GRADE WATER SUPPLY TO PRESSURIZER RELIEF TANK
    -------------------------------------------------------------------------------------------
2*RC*HCV*2556A    11548-CBM*086A 1 OF 3 E-8 AO PLUG
:---------------------
VP
                                                                                                                          ---------
2.0.0        E    C LOOP FILL BOUNDARY VALVE
    ---------------------------------------*----------------------------------------------------------------------------------
2-RC*HCV-2556B    11548*CBM-086A    2 OF 3 D-8     (10 PLUG          2.00  1    E    C            VP LCX>P FILL BOUNDARY VALVE 2*RC*HCV-2556C    .11548-CBM-086A    3 OF 3 D-3    AO PLUG            2.00        E     C            VP.
LOOP FILL BOUNDARY VALVE 2-RC*MOV-2535
* 11548*CBM-086B    1 OF 3 E-4     MO GATE            3.00        B  . OC          EV ST VP BLOCK VALVE FOR PRESSURIZER Poi.lER OPERATED
-* 2-RC*MOV-2536 RELIEF VALVE
    ----------------------------------------------------* ---------------------------------------------------------------------
11548*CBM-086B    1 OF 3 D-4    MO GATE BLOCK VALVE FOR PRESSURIZER POIJER OPERATED RELIEF VALVE 3.00         B    oc          EV ST VP
  .------------------------------------------------* ------------------------------------------------------------------------*-
2*RC*PCV*2455C    11548-CBM*086B    1 OF 3 D-3    AO PLUG            3.00         BC    OC          EV          7 FS          7 ST      34 VP PRESSURIZER POWER OPERATED PRESSURE CONTROL VALVE DISCHARGE TO PRESSURIZER RELIEF TANK
    ---------------.-----------------*----------------------------------*-----------------------------------------------------.-
2*RC*PCV*2456      11548*CBM-086B    1 OF 3 E-3    AO PLUG            3.00         BC. OC          EV          7 FS          7 ST      34 VP PRESSURIZER POWER OPERATED PRESSURE CONTROL VALVE DISCHARGE *TO PRESSURIZER RELIEF TANK 2*RC*SOV-200A1    11548-CBM-086A    3 OF 3 B-5    SO GATE            1.00        B    OC           EV      31 FS      31 ST.    ~4 VP REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY
*                  .


VIRGINIA PO\IER COMPANY                               PAGE: 37 OF 63
VALVE NUMBER 2-SI-082 2-SI-085 DRAWING SHEET NUMBER NUMBER 11548-CBM-089B 4 OF 4 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT E-7 CHECK VALVE 6.00 AC RCS COLD LEG SI ADMISSION CHECK VALVE TEST POS oc 11548-CBM-089B 4 OF 4. D-7 CHECK VALVE 6.00 AC OC RCS COLD LEG SI ADMISSION CHECK VALVE ISO VALVE TYPE PIV PIV TEST TYPE CV LT CV LT PAGE:
* SURRY UNIT 2                                     REVISION: 03 SECOND INSPECTION INTERVAL                             DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE               VALVE*    ASME        TEST  VALVE TEST    REQ SHUT TEST NUMBER            NUMBER          NUMBER COOR TYPE               SIZE     CLASS CAT   POS   TYPE TYPE      V-  CSV- VNC*
46 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-27 27
2-RC*SOV-200A2    11548-CBM-086A  3 OF 3 A-5    SO GATE            1.00         8    oc          EV      31 FS      31 ST      34 VP REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY
-------------------------------*-----------------------------------------------------------------------------------*-**--* 1 2-SI-088 11548-CBM-089B 4 Of 4 D-7 CHECK VALVE 6.00 C
  -------- *-----------------------------------------------------------------------.
OC CV 27 RCS HOT LEG SI ADMISSION CHECK VALVE I
2-RC-SOV-200B1    11548-CBM-086A 3 OF 3 8-5 SO GATE                  1.00        B
2-SI-091 2-SI-094.
                                                                                      -----------------------------------------
2-SI-107 2-SI-109 2*SI-128 2-SI-130 11548-CBM-089B 4 OF 4 C-7 CHECK VALVE RCS HOT LEG SI ADMISSION CHECK VALVE 11548-CBM-089B 4 OF 4 B-7 CHECK VALVE RCS HOT LEG SI ADMISSION CHECK VALVE 6.00 6.00 11548-CBM-089B 1 OF 4 B-7 CHECK VALVE 12.00 "A" ACCUMULATOR DISCHARGE CHECK VALVE 11548-CBM-0898 1 OF 4 B-8 CHECK VALVE "A" ACCUMULATOR COLD LEG ADMISSION CHECK VALVE 11548-CBM-089B 2 OF 4 B-6 CHECK VALVE 11811 ACCUMULATOR DISCHARGE CHECK VALVE 11548-CBM-089B 2 OF 4 B-7 CHECK VALVE 11811 ACCUMULATOR COLD LEG ADMISSION CHECK VALVE 12.00 12.00 12.00 C
oc          EV      31 FS      31 ST      34 VP REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY
oc CV 27 C
  -------------------------------------------------------------------------------------------------------------------------.
oc CV 27 C
2-RC-SOV-20082    11548-CBM-086A  3 OF 3 A-5    SO GATE            1.00        B    oc          EV      31 FS      31 ST      34 VP REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY 2-RC-SV-2551A    11548-CBM-0868  1 OF 3 E-6    SAFETY VALVE       6.00         C     0            SP
0 CV 26 C
* 2-RC-SV*2551B PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK
oc CV 26 29 C
  ----------------------------------------------------------------------------------------*----------------------------------
0 CV 26 C
11548-CBM-0868  1 OF 3 E-5    SAFETY VALVE PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK 6.00        C    0            SP
oc CV 26 29 2*SI*145 11548-CBM-089B 3 OF 4 B-5 CHECK VALVE "C" ACCUMULATOR DISCHARGE CHECK VALVE "C" ACCUMULATOR COLD LEG ADMISSION CHECK VALVE 12.00 C
  ------------------*--------------------------------------------------------------------------------------------------------
0 CV 26
2*RC-SV*2551C    11548-CBM-0868  1 OF 3  E-5    SAFETY VALVE       6.00         C*    0            SP PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK
  ------------ *--------------------------------------------------------*-.--------------------------------------------------
2-RC*TV*2519A    11548-CBM-0868 2 OF 3 D-7 AO GATE                  3.00 2      A    C    CIV    EV FS LT ST VP PRIMARY GRADE WATER SUPPLY TO PRT*#2 RCP SEAL STANDPIPES & FLUSH CONNECT, OUT CONT ISO VLV
* VIRGINIA POWER COMPANY                          PAGE:  38 OF 63
* SURRY UNIT 2                                REVISION: 03 SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO        REL COLD ALT VALVE            DRAIJING          SHEET DRIJG VALVE                VALVE    ASHE
* TEST VALVE TEST  REQ .SHUT TEST NUMBER            NUMBER            NUMBER COOR TYPE                  SIZE    CLASS CAT* POS  TYPE  TYPE  V-  CSV- VNC-2-RH-005          11548-CBM-087A    1 OF 2 E*S        CHECK VALVE       10.00 2    C    QC        CV        8
                    ---------------------------------------------
                    "B" RHR PUMP DISCHARGE CHECK VALVE
  .-----------------------------------------------------------------------------------------------------------------------*-
QC        CV 2-RH-011          11548-CBM-087A. 1 OF 2 E-7          CHECK VALVE
* 10.00  2    C                          8 "A" RHR PUMP DISCHARGE CHECK VALVE 2-RH-047          11548-CBM-087A    2 OF 2 C-3        CHECK VALVE       10.00  1    C    0          CV        8
                    ------------------- *-------------------------
RHR DISCHARGE TO LOOP 2 COLD LEG CHECK VALVE 2-RH-FCV-2605    11548-CBM~087A    2 OF 2 C-7       AO BFLY          12.00 2    B    C          EV        14 FS        14 ST    47 RHR HEAT EXCHANGERS BYP~SS FLOIJ CONTROL VALVE 2-RH*HCV-2758    11548-CBM-087A    2 OF 2 C-5        AO BFLY          12.00 2    B    0          EV        14 FS        14 ST    47
* 2-RH*MOV-200 RHR HEAT EXCHANGERS DISCHARGE FLOIJ CONTROL VALVE 11548*CBM-087A . 2 OF 2 E-3        MO GATE
                    ------------ .----------------------------*---
RHR SUPPLY ISOLATION TO REFUEL IJATER STORAGE TANK, OUTSIDE CONTAINMENT ISOLATION VALVE
  ----------------------------------------*
6.00  2    AE    C   CIV  LT
                                            ---------------------------------------------------------------------------------
2-RH*MOV-2700    115~8-CBM-087A 1 OF 2 A-5 MO GATE                    14.00        B    0          EV        9 ST VP RHR PUMP SUPPLY ISOLATION FROM RC LOOP 1 HOT LEG 2-RH-MOV-2701    11548-CBM-087A    1 OF 2 A-4       MO GATE          14.00        B     0          EV        9 ST VP RHR PUMP SUPPLY ISOLATION FROM RC LOOP 1 HOT LEG 2*RH*MOV-2720A    11548-CBM-087A    2 OF 2 C-3        MO GATE          10.00        B    0          EV        10 ST VP RHR RETURN ISOLATION TO  11 8 11 ACCUMULATOR DISCHARGE LINE 2-RH*MOV-2720B    11548-CBM-087A    2 OF 2 B-3        MO GATE          10.00       B    0         EV        10 ST VP
                    ---------------------------------------------
* RHR RETURN ISOLATION TO 11 C11 ACCUMULATOR DISCHARGE LINE


VIRGINIA POWER COMPANY                                PAGE:  39 OF 63 SURRY UNIT 2                                     REVISION: 03
VALVE NUMBER 2-SI-150 DRAWING SHEET NUMBER NUMBER 11548-CBM*OS9A 3 OF 3 VIRGINIA POIJER COMPANY.
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING         SHEET DRWG
SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE  
* VALVE            VALVE    ASME        TEST VALVE TEST      REQ SHUT TEST NUMBER           NUMBER           NUMBER COOR TYPE              SIZE    CLASS CAT  PCS TYPE TYPE        V-    CSV- VNC-
. DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT F-6 MAN GLOBE
                                                                            ......
* 0.75 2
2-RH-RV-2721    1154S-CBM-087A  2 OF 2 D-4    RELIEF VALVE      3 *.00 2      C    0            SP
AE BORON INJECTION TANK BYPASS LINE ISOLATION VALVE - TO RCS COLD LEG ISO TEST VALVE pos TYPE C
                  ---------------------------------------------
CIV TEST TYPE LT PAGE:
RHR SYSTEM RELIEF VALVE
47 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV*
  -------------------------------------------------------------- .-----------------------------------------------------------
VNC*
*
39  
* VIRGINIA PO\JER COMPANY                        PAGE:    40 OF 63 SURRY UNIT 2                             REVISION: 03
---------------------------------------------------------------- ~-------------------------------------------------------
* SECOND INSPECTION INTERVAL                       DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO        REL COLD    ALT VALVE    DRAWING          SHEET DRWG VALVE               VALVE   ASME      TEST VALVE TEST REQ SHUT    TEST NUMBER  NUMBER            NUMBER COOR TYPE               SIZE     CLASS CAT POS  TYPE  TYPE V-   CSV-  VNC-2-RL-003 11448-CBM-118A  3 OF 3 D-7    MAN DIAPHRAGM      3.00  2     AE  C    CIV  LT  39
2-SI-174 11548-CBM*089A. 3 OF 3 D-6 MAN GLOBE HIGH HEAD SAFETY INJECTION TO RCS 0.75 2
          ---------------------------------------------
AE C
REFUELING PURIFICATION FROM RP PUMPS TO REACTOR CAVITY, OUTSIDE CONT ISOLATION VALVE 2-RL-005 11448-CBM-118A  3 OF 3 D-6    MAN DIAPHRAGM      3.00  2    AE C    CIV  LT  39 REFUELING PURIFICATION FROM RP PUMPS TO REACTOR CAVITY, INSIDE CONT ISOLATION VALVE 2-RL-013 11448-CBM-118A  3 OF 3 B-7    MAN DIAPHRAGM      3.00  2    AE  C    CIV  LT REFUELING PURIFICATION FROM REACTOR CAVITY TO RP PUMPS, INSIDE CONT ISOLATION VALVE 2-RL-015 11448-CBM-118A  3 OF 3 B-7    MAN DIAPHRAGM      3.00  2    AE  C    CIV  LT REFUELING PURIFICATION FROM REACTOR *CAVITY TO RP PUMPS, OUTSIDE CONT ISOLATION VALVE
CIV LT 39 2-SI~201 11548-CBM-089A 1 OF 3 C-7 CHECK VALVE RWST SUPPLY CHECK VALVE TO LHSI PUMP SEALS 0.75 2
*
C C
* VIRGINIA POWER COMPANY                              PAGE:  41 OF 63 SURRY UNIT 2                                    REVISION: 03
CV 2-Sl-207 1154S*CBM-089A 1 OF 3 C-5.
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO             REL  COLD ALT VALVE            DRAIJING          SHEET DRIJG VALVE              VALVE    ASME        TEST VALVE TEST    REQ  SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE              SIZE    CLASS CAT  POS TYPE   TYPE    v-  csv- VNC-2-RM-003        11548-CBP-014B    1 OF 1 B-5    CHECK VALVE      0.75  2      AC  C   CIV    CV      44 LT
CHECK VALVE RWST SUPPLY CHECK VALVE TO LHSI PUMP SEALS 0.75 2
                  --------- :-----------------------------------
C.
RETURN TO CONTAINMENT FROM RADIATION MONITOR-ING CABINET, INSIDE CONT !SOL CHECK VALVE
C CV 2-Sl *224 2-Sl-225 11548-CBM-089B 4 OF 4 F-3 CHECK VALVE HIGH HEAD SI FROM CHARGING PUMPS TO.RCS COLD LEGS, INSIDE CONT CHECK VALVE 11548-CBM-089B 4 OF 4 E-3 CHECK VALVE HIGH HEAD SI FROM.CHARGING* PUMPS TO RCS COLD.
  ------------------------------------------------------------------------------------------------
LEGS, INSIDE CONT CHECK VALVE 3.00  
11548-CBP-014B 1 OF 1 B-4 AO GATE                                          CIV
.2 3.00 2
                                                                                                    --------------------------
EV 2-RM-TV-200A                                                        0.75  2      A    C FS LT ST      34 VP RETURN ISOLATION FROM AIR RADIATION MONITOR TO CONTAINMENT, OUTSIDE CONT ISOLATION VALVE 2-RM-TV-200B    11548-CBP-014B      OF    F-8    AO GATE          0.75  .2      A*  C    CIV    EV FS LT ST      34 VP SUPPLY !SOL TO AIR RAD MONITOR FROM CONTAIN-MENT VENT DUCT, OUTSIDE CONT ISOLATION VALVE
  --
2-RM-TV-200C
                ------------ .------------- ----------------------. --------------------------------------- *-----------------
11548-CBP-014B    1 OF 1 E-8    AO GATE          0.75  2      A    C*  CIV    EV FS
* LT ST      34 VP SUPPLY !SOL TO AIR RAD MONITOR FROM.CONTAIN-MENT VENT DUCT, l~SIDE CONT ISOLATION VALVE
* VIRGINIA POl,IER COMPANY                            PAGE:   42 OF 63
* SURRY UNIT 2                                    REVISION: 03 SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO          REL COLD ALT VALVE            DRAWING            SHEET DRWG VALVE              VALVE      ASHE      TEST VALVE TEST    REQ SHUT TEST NUMBER          NUMBER              NUMBER COOR TYPE              SIZE      CLASS CAT POS TYPE TYPE      v-  csv- VNC-2-RS-011        11548-CBM-0848      2 OF 2 E-5    CHECK VALVE      10.00    2    AC  oc    CIV  CV LT 43                1
                  ---------------------------------------------
                  "B" OUTSIDE RECIRC SPRAY PUMP INSIDE CONTAINMENT ISOLATION CHECK VALVE 2-RS-017        11548-CBM-084B      2 OF 2 D-5    CHECK VALVE      10.00    2    AC  OC    CIV  CV    43 LT "A" OUTSIDE RECIRC SPRAY PUMP INSIDE
                .
CONTAINMENT ISOLATION CHECK VALVE                                          .
  --------------------------------------------------------------------------------------------------------------------------
2-RS-046        11548-CBM-084B 2 OF 2 A-6. MAN GATE                          2    AE  C      CIV  LT    39 OUTSIDE RECIRC SPRAY PUMP*SUCTION BYPASS LINE ISOLATION VALVE 2-RS-053        11548-CBM-0848      2 OF 2 B-6    MAN GATE                  2    AE  C      CIV  LT    39 OUTSIDE RECIRC SPRAY PUMP SUCTION BYPASS LINE ISOLATION VALVE
  ----------------*-------------------------------------------------------------------------- .-------------------------------
2-RS*MOV-255A    11548-CBM-084B      2 OF 2 B-6    MO PLUG          12.00    2    A  CC    CIV  EV LT    39 ST
* VP "A" OUTSIDE RECIRC SPRAY PUMP SUCTION ISOLAT VALVE FROM CONTAINMENT SUMP 2-RS*MOV*255B    11548-CBM-084B      2 OF 2 B-6    MO PLUG          12.00    2    A  CC    CIV  EV LT    39 ST
                                                                                                    . VP "B". OUTSIDE REC I RC SPRAY PUMP SUCTION ISOLAT VALVE FROM CONTAINMENT SUMP 2-RS*MOV-256A    11548-CBM-084B      2 OF 2 D-6    MO BFLY          10.00    2    A  CC    CIV  EV LT ST VP 11 A11 OUTSIDE RECIRC SPRAY PUMP DISCHARGE ISO*
LATION, OUTSIDE CONTAINMENT ISOLATION VALVE 2-RS*MOV*256B    11548*CBM*0S4B      2 OF 2 E-6    MO BFLY          10.00    2    A  CC    CIV  EV LT ST VP "A" OUTSIDE RECIRC SPRAY PUMP DISCHARGE ISO*
LATION, OUTSIDE CONTAINMENT ISOLATION VALVE
* VIRGINIA PO\IER COMPANY                        PAGE:    43 OF 63 SURRY UNIT 2                                REVISION: 03
* SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL COLD    ALT VALVE    DRAlollNG        SHEET DRlolG VALVE              VALVE. ASME      TEST VALVE TEST REC SHUT    TEST NUMBER    NUMBER            NUMBER COOR TYPE                SIZE      CLASS CAT  POS TYPE TYPE  V-  CSV-  VNC-2-RT-02  11548-CBM-124A    1 .OF 4 . E-7    MANUAL GLOBE      3_00  2    AE  C          LT
            -------------------* -------------------------
STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 2-RT-06  11548-CBM-124A    1 OF 4 E-6      MANUAL GLOBE      3.00  2*    AE  C          LT
            ------------------------- *-------------------
STEAM GENERATOR RECIRCULATION OUTSIDE
          ,CONTAINMENT ISOLATION VALVE 2-RT-21  11548-CBM-124A    2 OF 4 E-7      MANUAL GLOBE      3.00  2    AE  C          LT STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 2-RT-25  11548-CBM-124A    2 OF 4    E-6   MANUAL GLOBE       3.00  2     AE  C          LT
          'STEAM GENERATOR RECIRCULATION OUTSIDE CONTAINMENT ISOLATION VALVE 2-RT-40  11548-CBM-124A    3 OF 4 E-7      MANUAL GLOBE      3.00  2    AE   C         LT STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 2-RT-44  11548-CBM-124A    3 0: 4 E-6      MANUAL GLOBE      3.00  2    AE  C          LT
*          ---------------* ------------------- .--- .------
STEAM GENERATOR RECIRCULATION OUTSIDE CONTAINMENT ISO~ATION VALVE
* VIRGINIA POIJER COMPANY                        PAGE: 44 OF 63 SURRY UNIT 2                                REVISION: 03
* SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL COLD ALT VALVE    DRAWING          SHEET DRWG VALVE              VALVE    ASHE      TEST VALVE TEST REQ SHUT TEST NUMBER  NUMBER          NUMBER COOR TYPE              SIZE*    CLASS CAT  POS  TYPE TYPE  v- csv- VNC-
                                                                                                --- --- ..
2-SA-081 11548-CBM-075E  1 OF 1 B-6    MAN GATE          2.00  2    AE  C    CIV   LT SERVICE AIR SUPPLY TO UNIT 1 CONTAINMENT, INSIDE CONTAINMENT ISOLATION VALVE 2-SA-082 11548-CBM-O?SE  1 OF*1  B-6    MAN GATE          2.00  2    AE  C    CIV  LT SERVICE AIR SUPPLY TO UNIT 1 CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE
*
* VIRGINIA POWER COMPANY                              . PAGE: 45 OF 63 SURRY UNIT 2                                      REVISION: 03
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING              SHEET DRWG VALVE              VALVE    ASME        TEST  VALVE  TEST    REQ SHUT TEST NUMBER          NUMBER                NUMBE~ COQR TYPE              SIZE    CLASS CAT POS      TYPE    TYPE    v- csv- VNC-2-SI-025          11548-CBM*089A       1 OF 3 E-5    CHECK VALVE       8.00  2      C    oc            CV      28
                    ---------------------------------------------
RWST SUPPLY CHECK VALVE TO CHARGING PUMP SUCTION HEADER
  ----.----------------------------------------------------------------------------------------.------------------------------
1.00 2      AE C       CIV 2-Sl-032          11548-CBM-0898      1 OF 4 E-3    MAN GLOBE                                          LT ACCUMULATOR MAKEUP LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 2-Sl-046A        11548*CBM*089A      1 OF 3 A-3    CHECK VALVE      12.00  2      C     0            CV     21 RWST SUPPLY CHECK VALVE TO 11 A11 LOW HEAD SI PUMP SUCTION 2-Sl-046B        11548*CBM*089A       1 OF 3 B-3    CHECK VALVE     12.00  2      C    0            CV      21 RWST SUPPLY CHECK VALVE TO "B" LOW HEAD SI PUMP SUCTION
  -----------------------------------------------------------------------------------.
2-Sl-047        11548-CBM-089A 1 OF 3 B-5 CHECK VALVE                12.00 2       C
                                                                                            ----------------*---------------------
0            CV      20 11 811 LOIJ HEAD SI PUMP SUCTION CHECK VALVE FROM CONTAINMENT SUMP 2-Sl~OSO        11548*CBM*089A        1 OF 3 C-4    CHECK VALVE      10.00  2      C     oc
* CV     21
* 2*Sl*053 11 811 LO'J HEAD_ SI PUMP DISCHARGE CHECK VALVE 11548-CBM-089A        2 OF 3 8*4    CHECK VALVE NBN LO'J HEAD SI PUMP MINIMUM FLOW/TEST LINE DISCHARGE CHECK VALVE
_ 2.00  2      C    0            CV
  -------------------------*-----------------------*--------------------------------------------------------------------------*
2*Sl*OS6        11548*CBM*089A 1 OF 3 B-7 CHECK VALVE                12.00 2        C    0            CV      20 "A" LOW HEAD SI PUMP SUCTION CHECK VALVE FROM CONTAINMENT SUMP 2-Sl-061        11548*CBM*089A        2 OF 3 8*5    CHECK VALVE        2.00  2      C    0            CV "A" LO'J.HEAD SI PUMP MINIMUM FLOW/TEST LINE DISCHARGE CHECK VALVE 2*Sl*073        11548*CBM*089A. 2 OF 3 E*7          MAN GLOBE          0.75  2      AE    C    CIV    LT ACCUMULATOR TEST LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI -079 -      11548*CBM*089B       4*0F 4 F-7    CHECK VALVE       6.00  1      AC    OC    PIV    CV    27 LT RC_S COLD LEG SI ADMISSION CHECK VALVE
* VIRGINIA POWER COMPANY                              PAGE:  46 OF 63 SURRY UNIT 2    .                                REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD ALT VALVE            DRAWING              SHEET DRWG VALVE              VALVE    ASHE        TEST VALVE  TEST    REQ  SHUT TEST NUMBER          NUMBER              NUMBER COOR TYPE              SIZE    CLASS  CAT POS  TYPE    TYPE    v-  csv- VNC-2-SI-082        11548-CBM-089B       4 OF 4 E-7    CHECK VALVE       6.00          AC  oc  PIV    CV      27 LT
                  ---------------------------------------------
RCS COLD LEG SI ADMISSION CHECK VALVE 2-SI-085        11548-CBM-089B      4 OF 4. D-7    CHECK VALVE      6.00          AC  OC  PIV    CV      27 LT RCS COLD LEG SI ADMISSION CHECK VALVE
  -------------------------------*-----------------------------------------------------------------------------------*-**--*
2-SI-088        11548-CBM-089B 4 Of 4 D-7 CHECK VALVE                 6.00           C  OC          CV      27 1
RCS HOT LEG SI ADMISSION CHECK VALVE I
  --------------------------------------------------------------------------------------------------------------------------
2-SI-091        11548-CBM-089B 4 OF 4 C-7 CHECK VALVE                6.00          C  oc          CV      27 RCS HOT LEG SI ADMISSION CHECK VALVE 2-SI-094 .      11548-CBM-089B      4 OF 4 B-7    CHECK VALVE      6.00           C  oc          CV      27 RCS HOT LEG SI ADMISSION CHECK VALVE
* 2-SI-107 2-SI-109 11548-CBM-089B 11548-CBM-0898 1 OF 4 B-7 1 OF 4 B-8 CHECK VALVE "A" ACCUMULATOR DISCHARGE CHECK VALVE CHECK VALVE "A" ACCUMULATOR COLD LEG ADMISSION CHECK 12.00 12.00 C
C 0
C 0
oc CV CV 26 26  29 VALVE 2*SI-128        11548-CBM-089B      2 OF 4 B-6    CHECK VALVE      12.00          C  0            CV      26 11 811 ACCUMULATOR DISCHARGE CHECK VALVE 2-SI-130        11548-CBM-089B      2 OF 4 B-7    CHECK VALVE      12.00          C  oc          CV      26  29 11 8 11 ACCUMULATOR COLD LEG ADMISSION CHECK VALVE
CV  
  ---------------------------------------------------------------------------------------------*
. 27 C
2*SI*145        11548-CBM-089B 3 OF 4 B-5          CHECK VALVE      12.00
0 CV
                                                                                                    ----------------------------
: 27.
CV C  0                    26 "C" ACCUMULATOR DISCHARGE CHECK VALVE "C" ACCUMULATOR COLD LEG ADMISSION CHECK VALVE
2-Sl-226 2-Sl-227 2-Sl-228 2-SI-229 1154S*CBM-089B 4 OF 4 C-3 CHECK VALVE HIGH HEAD SI FROM CHARGING PUMPS TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 11548-CBM*OS9B 4 OF 4 C-3 CHECK VALVE HIGH HEAD SI FROM CHARGING PUMPS TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 11548-CBM*OS9B 4 OF 4 B-3 CHECK VALVE LOW HEAD SI FROM LHSI PUMP TO RCS HOT LEGS, INSIDE CONT CHECK VA~VE 11548-CBM-089B 4 OF 4 B-3 CHECK VALVE LOW HEAD SI FROM LHSI PUMP TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 3.00 2
* VIRGINIA POIJER COMPANY.                                  PAGE:    47 OF 63 SURRY UNIT 2                                          REVISION: 03
3.00 2
* SECOND INSPECTION INTERVAL                                  DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET . DRWG VALVE                VALVE      ASHE        TEST VALVE  TEST    REQ SHUT TEST NUMBER            NUMBER            NUMBER COOR TYPE                  SIZE        CLASS CAT pos TYPE        TYPE    V-    CSV* VNC*
6.00 2
2-SI-150          11548-CBM*OS9A    3 OF 3 F-6      MAN GLOBE
6.00 2
* 0.75    2      AE    C    CIV    LT      39
C 0
                    ---------------------------------------------
CV 27 C
BORON INJECTION TANK BYPASS LINE ISOLATION VALVE - TO RCS COLD LEG
0 CV 27 C
  ----------------------------------------------------------------
0 CV 27 C
2-SI-174          11548-CBM*089A. 3 OF 3 D-6 MAN GLOBE
0 CV 27 2:;;:23s*---* -*--;;s4~:~;~:c;~9;** -4*c;;*4 ** ;:;** ~~~~~-~~~~~----* **2:c;c;** -------- ~ ---*c; * -----------~~-----* 2; * -------------I.*
                                                                        ~-------------------------------------------------------
2-Sl-236 HIGH HEAD SI TO RCS COLD LEG, INSIDE MISS.ILE BARRIER CHECK VALVE 11548-CBM-089B 4 OF 4 E-7 CHECK VALVE HIGH HEAD SI TO RCS COLD LEG, INSIDE MISSILE BARRIER CHECK VALVE 2.00 C
0.75 2          AE C       CIV    LT      39 HIGH HEAD SAFETY INJECTION TO RCS
0 CV 27  
  --------*-----------------------------------------------------------------------------------------------------------------
2-SI~201          11548-CBM-089A 1 OF 3 C-7 CHECK VALVE                  0.75 2          C    C            CV RWST SUPPLY CHECK VALVE TO LHSI PUMP SEALS
                                                                                                    .                            .
  --------------------------------------------------------------------------------------------------------------------------
1154S*CBM-089A 1 OF 3 C-5. CHECK VALVE                0.75 2                            CV 2-Sl-207                                                                                C. C RWST SUPPLY CHECK VALVE TO LHSI PUMP SEALS
  -----------------------------------------------------------------------------------------------------*---------------------
                                                                                                                    . 27 2-Sl *224        11548-CBM-089B    4 OF 4 F-3      CHECK VALVE        3.00    .2      C    0            CV HIGH HEAD SI FROM CHARGING PUMPS TO.RCS COLD LEGS, INSIDE CONT CHECK VALVE 2-Sl-225          11548-CBM-089B    4 OF 4 E-3      CHECK VALVE        3.00    2     C    0            CV      27.
* 2-Sl-226 HIGH HEAD SI FROM.CHARGING* PUMPS TO RCS COLD.
LEGS, INSIDE CONT CHECK VALVE
  --------------------------------  .---------------------------------------------------------------------------
1154S*CBM-089B 4 OF 4 C-3 CHECK VALVE HIGH HEAD SI FROM CHARGING PUMPS TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 3.00 2          C    0            CV      27
                                                                                                                          *-------------
2-Sl-227          11548-CBM*OS9B   4 OF 4 C-3       CHECK VALVE         3.00    2      C    0            CV      27 HIGH HEAD SI FROM CHARGING PUMPS TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 2-Sl-228          11548-CBM*OS9B   4 OF 4 B-3       CHECK VALVE         6.00    2      C    0            CV      27 LOW HEAD SI FROM LHSI PUMP TO RCS HOT LEGS, INSIDE CONT CHECK VA~VE 2-SI-229          11548-CBM-089B   4 OF 4 B-3       CHECK VALVE         6.00    2      C    0            CV      27 LOW HEAD SI FROM LHSI PUMP TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 2:;;:23s*---*-*--;;s4~:~;~:c;~9;** -4*c;;*4 ** ;:;** ~~~~~-~~~~~--- -***2:c;c;** -------- ---*c;*-----------~~-----*2;*------------- I .*
                                                                                          ~
HIGH HEAD SI TO RCS COLD LEG, INSIDE MISS.ILE BARRIER CHECK VALVE                 .
2-Sl-236          11548-CBM-089B   4 OF 4 E-7       CHECK VALVE        2.00            C    0            CV      27 HIGH HEAD SI TO RCS COLD LEG, INSIDE MISSILE BARRIER CHECK VALVE
  -------------------------------------------------------------------------------------------------------- .------------------
* VIRGINIA POWER COMPANY                              PAGE:  48 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT
  -VALVE            DRAWING          SHEET  DRWG VALVE            VALVE    ASME        TEST VALVE TEST    REQ SHUT TEST NUMBER          NUMBER            NUMBER  COOR TYPE              SIZE    CLASS  CAT  POS  TYPE    TYPE  V-  CSV- VNC-2-SI-237        11548*CBM-089B    4 OF 4 D*7    CHECK-VALVE       2.00          C    0            CV    27 HIGH HEAD SI TO RCS COLD LEG, INSIDE MISSILE BARRIER CHECK VALVE 2-SI-238        11548-CBH*089B    4 OF 4 D-7    CHECK VALVE      6.00          C    OC          CV    27 LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 2-Sl-239        11548-CBH-089B    4 OF 4 C-7    CHECK VALVE      6.00         C   QC          CV    27 LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG
  -----------------------------------------------------------------------. --------------------------------------------------
2-SI-240        11548-CBH-089B    4 OF 4 B-7    CHECK VALVE      6.00          c    OC        - CV      27 LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 2-SI-241        11548-CBH-089B    4 OF 4 F-7    CHECK VALVE      6.00          AC  OC  PIV    CV     27 LT LOW HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE
* 2-SI-242        11548-CBM-089B    4 OF 4 E-7    CHECK VALVE      6.00  1      AC  OC  PIV    CV    27 LT LOW HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 2-SI-243        11548-CBM-089B    4 OF 4 D-7    CHECK VALVE      6.00          AC  OC  PIV    CV    27
                                                                                                    . LT LOW.HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 2-Sl-304        11548-CBH*089B    1 OF 4 F-3    CHECK VALVE      1.00  2      AC  C    CIV    CV    44 LT NITROGEN SUPPLY TO ACCUMULATORS, INSIDE CONTAINMENT ISOLATION CHECK VALVE
  -------------------------------------. -----------------------------------------------------------.------------------------
2-SI-321        11548-CBM-.089A  1 OF 3 A-5    MAN GLOBE        0.75  2      AE  C    CIV    LT    39 LOW HEAD SI FROM CHARGING HEADER TO RCS COLD LEGS, BYPASS LINE ISOLATION VALVE 2-SI *322        11548-CBM-089A    1 or 3  B-7    MAN GLOBE        0.75  2      AE  C    CIV    LT    39 LOW HEAD SI FROM CHARGIN~ HEADER TO RCS COLD LEGS, BYPASS LINE ISOLATION VALVE 2-SI-327 .      11548-CBM-089A    1 OF 3 C-6    CHECK VALVE      10.00  2      C    oc          CV      21
                    -------* -------------------------------------
                    "A" LOW HEAD SI PUMP DISCHARGE CHECK VALVE
* VIRGINIA POIJER-COMPANY                                PAGE:    49 OF 63
* SURRY UNIT 2                                        REVISION: 03 SECOND INSPECTION INTERVAL                                DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO              REL* COLD ALT VALVE            DRAWING            SHEET DRWG VALVE              VALVE. ASME      TEST VALVE TEST        REQ SHUT TEST NUMBER          NUMBER              NUMBER COOR TYPE              SIZE      .CLASS CAT POS TYPE TYPE          v- csv- VNC-2-Sl-400          11548-CBH-089A    1 OF 3 E-4    CHECK VALVE      10.00    2    C  0              CV      28
                    ---------------------------------------------
RWST SUPPLY CHECK VALVE TO CHARGING PUMP SUCTION HEADER
  --------------------------------------------------------------------------------------------------
2-SI-MOV-2842    11548-CBH-089A 3 OF 3 D-7 MO GATE                  3.Cio 2
* A  OC. CIV
                                                                                                          *-----------------.
EV            25
                                                                                                                              -----
LT ST VP HIGH HEAD SI_ FROM CHARGING HEADER TO RCS COLD LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE
  *********************************************************************,******************************************        *****    r 2-SI-MOV-2860A    11548-CBM-089A    1 OF 3 B-7    MO GATE          12.00    2    A  0      CIV    EV LT      39 ST VP
                    ~--------------------------------------------
                  "A" LOW HEAD SI PUMP SUCTION ISOLATION FROM CONTAINMENT SUMP 2-SI-MOV-2860B    11548-CBM-089A    1 OF 3 B-5    MO GATE          12.00    2    A  0      CIV    EV LT      39 ST VP
* 11 B" LOW HEAD SI PUMP SUCTION ISOLATION FROM CONTAINMENT SUMP
  ----------------------------------------------------------------------------------------------------------------------- .--
2-SI-MOV~2862A    11548-CBM-089A    1 OF 3 A-3    MO GATE          12.00    2    B  C              EV ST VP "A" LOW HEAD SI PUMP SUCTION FROM RWST 2-SI-MOV-2862B    11548-CBM-089A    1 OF 3 B-3    HO GATE          12.00    2    B  C              EV
                                                                                                        .ST VP 11 611 LOW HEAD SI PUMP SUCTION FROM RWST
  -------- ------------------------------------------------------------------------------------------------------------------
2-Sl*MOV*2863A    11548-CBM-089A 2 OF 3 C-5 HO GATE                  8.00 2        B  oc            EV ST VP A LO',I HEAD SAFETY INJECTION PUMP SUPPLY .
11 11 ISOLATION TO CHARGING PUMPS
  --------------------------------------------------------------.
2*Sl*HOV*2863B    11548-CBH-089A 2 OF 3 D-3 MO GATE
                                                                    -----------------------
8.00 2        B  oc.-----------------------------------
EV ST VP "B" LOW HEAD SAFETY INJECTION PUMP SUPPLY ISOLATION TO CHARGING PUMPS
* VIRGINIA POWER COMPANY                            PAGE:  50 OF 63 SURRY UNIT 2                                  REVISION: 03
* SECOND INSPECTION INTERVAL                          DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL COLD ALT VALVE            DRAWING            SHEET DRWG VALVE              VALVE    ASME        TEST VALVE TEST  REQ SHUT TEST NUMBER          NUMBER              NUMBER COOR TYPE              SIZE    CLASS  CAT POS TYPE    TYPE  v- csv- VNC-
                                                                                                            ---
2-SI-MOV-2864A  11548-CBM-089A      2 OF 3 0-6    MO GATE          10.00  2      B    oc        EV ST VP "A" LOW HEAD SI PUMP COLD LEG DISCHARGE STOP VALVE
  --------------------------------------------------------------------------------------------------------------------------
2-Sl~MOV-2864B  11548-CBM-089A 2 OF 3 D-4 MO GATE                  10.00 2        B    oc        EV ST VP "B" LOW HEAD SI PUMP COLD LEG DISCHARGE STOP VALV!;
2-SI-MOV-2B65A  11548-CBM-089B      1 OF 4 C-7    MO GATE          12.00  2      B    oc        EV ST VP "A" ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 2:;;:;~~=2~~;;---;;;~~=~;;:~~~;---2-~;-~--~=~---;;-~;~------- --;2:~~---2------;----~~-----------~~---------------------- I ST VP "B" ACCUMULATOR DISCHARGE ISOLATION VALVE TO
* RCS COLD LEG 2-SI-MOV-2865C  11548-CBM-089B      3 OF 4 C-5    MO GATE          12.00  2      B    oc        EV ST VP 11 C11 ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 2-SI-MOV-2867C  11548-CBM-089A      3 OF 3  F-6    MO GATE          3.00  2      A    .OC  CIV  EV        18 LT    39 ST VP BORON INJECTION TANK OUTLET TO RCS COLD LEG, OUTSIDE CONTAINMENT ISOLATION VALVE
  -------------------------------------------------------------------------* ------------------------------------------------
oc  CIV              18 2-SI-MOV-28670  11548-CBM-089A      3 OF 3 E-6    MO GATE          3.00  2      A                EV LT. 39 ST VP BORON INJECTION TANK OUTLET TO RCS COLD LEG, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2B69A  11548-CBM-089A      3 OF 3  C-7    MO GATE          3.00  2      A    oc  CIV  EV        25 LT    39 ST VP HIGH HEAD SI FROM CHARGING HEADER TO RCS HOT LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE
* VIRGINIA POWER COMPANY                              PAGE:  51 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD ALT VALVE            DRAWING            SHEET DRWG VALVE              VALVE    ASME        TEST VALVE TEST    REQ  SHUT TEST NUMBER          NUMBER              NUMBER COOR TYPE              SIZE    CLASS CAT  POS  TYPE  TYPE    v-  csv- VNC-o 2-Sl*MOV-28698  11548-CBM-089A      3 OF 3 E-4    MO GATE          3.00  2      A  oc  CIV  EV            25 LT ST VP HIGH HEAD SI FROH CHARGING HEADER TO RCS HOT LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2885A  11548-CBM-089A      2 OF 3 B-5    MO GATE          2.00  2    , B  C          EV ST VP "A" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2-SI-MOV*2885B  11548-CBM-089A      2 OF 3 B-4    MO GATE          2.00  2      B  C          EV ST VP 11 8" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2-SI-MOV-2885C  11548-CBM-089A      2 OF 3 B-4    MO GATE          2.00  2      B  C          EV ST VP
* 11 811 LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2*SI*MOV-2885D  11548-CBM-089A      2 OF 3 B-5    MO GATE          2.00  2      B  C          EV ST VP "A" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION
                        ,                                                                                          .
  --------------------------------------------------------------------------------------------------------------------------
2-S1*MOV-2890A  11548-CBM-089A      2 OF 3 C-7    MO GATE          10.00  2      A  QC  CIV  EV LT ST VP "A" LOW HEAD SI PUMP HOT LEG DISCHARGE STOP
_VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*Sl*MOV*2890B  11548-CBM-089A      2 OF 3 E-7    MO GATE          10.00  2      A  QC  CIV  EV LT ST VP 8 LOW HEAD SI PUMP HOT LEG DISCHARGE STOP 11 11 VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2890C  11548-CW4-089A      2 OF 3 D-7    MO GATE          10.00  2      A  QC  CIV  EV            17 LT ST VP LOW HEAD SI PUMPS COLD LEG DISCHARGE STOP VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE
*
  ----------------------------------- .----------------------------------------------.------------------------------------*  --


VIRGINIA POWER COMPANY                           PAGE:  52 OF 63 SURRY UNIT 2                                 REVISION: 03
-VALVE NUMBER 2-SI-237 2-SI-238 2-Sl-239 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548*CBM-089B 4 OF 4 D*7 CHECK-VALVE HIGH HEAD SI TO RCS COLD LEG, INSIDE MISSILE BARRIER CHECK VALVE 11548-CBH*089B 4 OF 4 D-7 CHECK VALVE LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 11548-CBH-089B 4 OF 4 C-7 CHECK VALVE LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 2.00 6.00 6.00 C
* SECOND INSPECTION INTERVAL                         DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO       REL COLD ALT VALVE              DRAWING             SHEET DRWG VALVE               VALVE     ASHE      TEST VALVE   TEST REQ SHUT TEST NUMBER              NUMBER              NUMBER COOR TYPE              SIZE      CLASS CAT POS TYPE     TYPE V*   csv- VNC*
C C
                                                                          -----
0 CV OC CV QC CV PAGE:
I
48 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-27 27 27 2-SI-240 2-SI-241 2-SI-242 2-SI-243 2-Sl-304 11548-CBH-089B 4 OF 4 B-7 CHECK VALVE LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 11548-CBH-089B 4 OF 4 F-7 CHECK VALVE LOW HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 11548-CBM-089B 4 OF 4 E-7 CHECK VALVE LOW HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 11548-CBM-089B 4 OF 4 D-7 CHECK VALVE LOW.HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 11548-CBH*089B 1 OF 4 F-3 CHECK VALVE NITROGEN SUPPLY TO ACCUMULATORS, INSIDE CONTAINMENT ISOLATION CHECK VALVE 6.00 6.00 6.00 1
                                                                                              - .. --
6.00 1.00 2
2*Sl*RV-2845A      11548*CBM-089A      2 OF 3 E-6     RELIEF VALVE        1.00 2    C   0             SP
c OC AC OC AC OC AC OC AC C
                        ---------------------------------------------
PIV PIV CV CV LT CV LT PIV CV CIV  
                        "A" LOW HEAD SI PUMP DISCHARGE RELIEF VALVE, RV DI SCHA.RGE TO SAFEGUARDS AREA SUMP 2*Sl*RV-2845B      11548-CBM-089A      2 OF 3 E-5    RELIEF VALVE       1.00. 2    C  0            SP LOW HEAD SI HEADER TO COLD.LEG RELIEF VALVE, RV DISCHARGE TO SAFEGUARDS AREA SUMP 2*Sl*RV*2845C      1154S*CBM*089A      2 OF 3 E-5    RELIEF VALVE       1.00  2    C  0            SP
. LT CV LT 27 27 27 27 44 2-SI-321 2-SI *322 2-SI-327.
* 11 811 LOW HEAD SI PUMP DISCHARGE RELIEF VALVE,
11548-CBM-.089A 1 OF 3 A-5 MAN GLOBE LOW HEAD SI FROM CHARGING HEADER TO RCS COLD LEGS, BYPASS LINE ISOLATION VALVE 11548-CBM-089A 1 or 3 B-7 MAN GLOBE LOW HEAD SI FROM CHARGIN~ HEADER TO RCS COLD LEGS, BYPASS LINE ISOLATION VALVE 11548-CBM-089A 1 OF 3 C-6 CHECK VALVE "A" LOW HEAD SI PUMP DISCHARGE CHECK VALVE 0.75 2
* RV DISCHARGE TO SAFEGUARDS AREA SUMP
0.75 2
    ------------------------------------------------------------------------------------------------------------*-------------
10.00 2
2*Sl*TV*200        11548*CBM*089A      3 OF 3* 8*7    AO GATE            1.00  2    A  C      CIV  EV FS LT ST  34 VP NITROGEN SUPPLY TO ACCUMULATORS, OUTSIDE CONTAINMENT ISOLATION VALVE 2-Sl*TV*201A        11548-CBM*089B      1 OF 4 C*.3    AO GATE            1.00 2     A  C       CIV   EV FS
AE C
* LT ST VP ACCUMULATORS TO WASTE GAS CHARCOAL FILTERS,*
CIV LT 39 AE C
INSIDE CONTAINMENT ISOLATION VALVE
CIV LT 39 C
    -----------* -------* ----------------.--------------------------* ----------------------------------------------------------
oc CV 21
CIV  *Ev
  . 2*SI *TV*201B      11548*CBM*089B
* 1 OF 4 B-2        AO GATE            1.00  2    A  C FS LT ST  34 VP ACCUMULATORS TO WASTE GAS CHARCOAL FILTERS, OUTSIDE CONTAINMENT ISOLATION VALVE 2*Sl*TV-202A        11548*CBM*089k      1 OF 3 E*7     AO GATE            8.00  2    B  0            EV FS ST VP UNIT 1 RWST TO UNIT 2 RWST CROSS TIE
    --------- .----------------------------------------------------------------------------------------------------------------
2*Sl*TV*202B        11548*CBM*089A 1 OF 3 E*7 AO GATE                      8.00 2     B  0             EV FS
                                                                                                          . ST VP UNIT 1 RWST TO UNIT 2 RWST CROSS TIE
*


                                              -------------------------~--
VALVE NUMBER 2-Sl-400 DRAWING SHEET NUMBER NUMBER 11548-CBH-089A 1 OF 3 VIRGINIA POIJER-COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE.
VIRGINIA POIJER COMPANY                                PAGE:    53 OF 63
ASME COOR TYPE SIZE
* SURRY UNIT 2                                       REVISION: 03 SECOND INSPECTION INTERVAL                               DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD  ALT VALVE            DRAWING          SHEET DRWG VALVE               VALVE    ASME      TEST  VALVE TEST      REQ  SHUT  TEST NUMBER            NUMBER            NUMBER COOR TYPE               SIZE     CLASS CAT POS   TYPE TYPE       v-   csv-   VNC-2*SS*TV-200A      11548-CBM-082A    2 OF 3 F-7   SO GATE         <i.375  1    A    C    CIV      EV FS LT ST     34 VP PRESSURIZER LIQUID SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLAllON VALVE
.CLASS CAT E-4 CHECK VALVE 10.00 2
  --------------------. ----------------------------------------------------------------------------. -------*------ -----------
C RWST SUPPLY CHECK VALVE TO CHARGING PUMP SUCTION HEADER ISO TEST VALVE TEST POS TYPE TYPE 0
2-SS-TV-200B      11548-CBM-082A    2 OF 3 F*6    SO GATE         0.375          A   C     CIV       EV FS LT ST     34 VP PRESSURIZER LIQUID SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SS-TV-201A     11548-CBM-082A   2 OF 3 E-7   SO GATE         0.375         A    C    CIV      EV FS LT ST    34 VP I
CV PAGE:
PRESSURIZER .VAPOR SPACE SAMPLE LINE, INSIDE
49 OF 63 REVISION: 03 DATE: 3/19/92 NC REL* COLD ALT REQ SHUT TEST v-csv-VNC-28 2-SI-MOV-2842 11548-CBH-089A 3 OF 3 D-7 MO GATE HIGH HEAD SI_ FROM CHARGING HEADER TO RCS COLD LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE 3.Cio 2
* CONTAINMENT ISOLATION VALVE
* A OC.
  -------------------* ------------------~-----------------------------------------------------~-----------------------------
CIV EV LT ST VP 25 r
2-SI-MOV-2860A 11548-CBM-089A 1 OF 3 B-7 MO GATE
~--------------------------------------------
"A" LOW HEAD SI PUMP SUCTION ISOLATION FROM CONTAINMENT SUMP 2-SI-MOV-2860B 11548-CBM-089A 1 OF 3 B-5 MO GATE 11B" LOW HEAD SI PUMP SUCTION ISOLATION FROM CONTAINMENT SUMP 12.00 2
A 12.00 2
A 0
CIV 0
CIV EV LT ST VP EV LT ST VP 39 39 2-SI-MOV~2862A 11548-CBM-089A 1 OF 3 A-3 MO GATE 12.00 2
"A" LOW HEAD SI PUMP SUCTION FROM RWST 2-SI-MOV-2862B 11548-CBM-089A 1 OF 3 B-3 HO GATE 12.00 2
11611 LOW HEAD SI PUMP SUCTION FROM RWST B
C B
C EV ST VP EV
.ST VP 2-Sl*MOV*2863A 11548-CBM-089A 2 OF 3 C-5 HO GATE 11A11 LO',I HEAD SAFETY INJECTION PUMP SUPPLY.
ISOLATION TO CHARGING PUMPS 8.00 2
B oc EV ST VP 2*Sl*HOV*2863B 11548-CBH-089A 2 OF 3 D-3 MO GATE "B" LOW HEAD SAFETY INJECTION PUMP SUPPLY ISOLATION TO CHARGING PUMPS 8.00 2
B oc EV ST VP
 
VALVE NUMBER DRAWING NUMBER VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASME CLASS CAT 2-SI-MOV-2864A 11548-CBM-089A 2 OF 3 0-6 MO GATE 10.00 2
B "A" LOW HEAD SI PUMP COLD LEG DISCHARGE STOP VALVE TEST POS oc ISO VALVE TEST TYPE TYPE EV ST VP PAGE:
50 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-Sl~MOV-2864B 11548-CBM-089A 2 OF 3 D-4 MO GATE "B" LOW HEAD SI PUMP COLD LEG DISCHARGE STOP VALV!;
2-SI-MOV-2B65A 11548-CBM-089B 1 OF 4 C-7 MO GATE "A" ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 10.00 2
12.00 2
B oc B
oc EV ST VP EV ST VP 2:;;:;~~=2~~;;---;;;~~=~;;:~~~;---2-~;-~--~=~---;;-~;~------- --;2:~~---2------;----~~-----------~~---------------------- I "B" ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 2-SI-MOV-2865C 11548-CBM-089B 3 OF 4 C-5 MO GATE 11C11 ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 2-SI-MOV-2867C 11548-CBM-089A 3 OF 3 F-6 MO GATE BORON INJECTION TANK OUTLET TO RCS COLD LEG, OUTSIDE CONTAINMENT ISOLATION VALVE 12.00 2
3.00 2
B oc A
.OC CIV ST VP EV ST VP EV LT ST VP 18 39 2-SI-MOV-28670 11548-CBM-089A 3 OF 3 E-6 MO GATE BORON INJECTION TANK OUTLET TO RCS COLD LEG, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2B69A 11548-CBM-089A 3 OF 3 C-7 MO GATE HIGH HEAD SI FROM CHARGING HEADER TO RCS HOT LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE 3.00 2
A oc 3.00 2
A oc CIV CIV EV LT.
ST VP EV LT ST VP 18 39 25 39
 
VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE VALVE NUMBER 2-Sl*MOV-28698 DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-089A 3 OF 3 E-4 MO GATE HIGH HEAD SI FROH CHARGING HEADER TO RCS HOT LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2885A 11548-CBM-089A 2 OF 3 B-5 MO GATE "A" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2-SI-MOV*2885B 11548-CBM-089A 2 OF 3 B-4 MO GATE 118" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2-SI-MOV-2885C 11548-CBM-089A 2 OF 3 B-4 MO GATE 11811 LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2*SI*MOV-2885D 11548-CBM-089A 2 OF 3 B-5 MO GATE "A" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION VALVE ASME SIZE CLASS CAT 3.00 2
A 2.00 2
, B 2.00 2
B 2.00 2
B 2.00 2
B TEST POS oc C
C C
C ISO VALVE TYPE CIV TEST TYPE EV LT ST VP EV ST VP EV ST VP EV ST VP EV ST VP PAGE:
51 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-o 25 2-S1*MOV-2890A 11548-CBM-089A 2 OF 3 C-7 MO GATE "A" LOW HEAD SI PUMP HOT LEG DISCHARGE STOP
_ VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*Sl*MOV*2890B 11548-CBM-089A 2 OF 3 E-7 MO GATE 11811 LOW HEAD SI PUMP HOT LEG DISCHARGE STOP VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2890C 11548-CW4-089A 2 OF 3 D-7 MO GATE LOW HEAD SI PUMPS COLD LEG DISCHARGE STOP VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 10.00 2
A 10.00 2
A 10.00 2
A QC CIV QC CIV QC CIV EV LT ST VP EV LT ST VP EV LT ST VP 17
 
VALVE NUMBER 2*Sl*RV-2845A 2*Sl*RV-2845B 2*Sl*RV*2845C VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548*CBM-089A 2 OF 3 E-6 RELIEF VALVE "A" LOW HEAD SI PUMP DISCHARGE RELIEF VALVE, RV DI SCHA.RGE TO SAFEGUARDS AREA SUMP 11548-CBM-089A 2 OF 3 E-5 RELIEF VALVE LOW HEAD SI HEADER TO COLD.LEG RELIEF VALVE, RV DISCHARGE TO SAFEGUARDS AREA SUMP 1154S*CBM*089A 2 OF 3 E-5 RELIEF VALVE
* 11811 LOW HEAD SI PUMP DISCHARGE RELIEF VALVE,
* RV DISCHARGE TO SAFEGUARDS AREA SUMP VALVE ASHE SIZE CLASS CAT I 1.00 2
C 1.00. 2 C
1.00 2
C ISO TEST VALVE TEST POS TYPE TYPE 0
SP 0
SP 0
SP PAGE:
52 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*
csv-VNC*
2*Sl*TV*200 2-Sl*TV*201A 11548*CBM*089A 3 OF 3* 8*7 AO GATE NITROGEN SUPPLY TO ACCUMULATORS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*089B 1 OF 4 C*.3 AO GATE ACCUMULATORS TO WASTE GAS CHARCOAL FILTERS,*
INSIDE CONTAINMENT ISOLATION VALVE 1.00 2
1.00 2
A C
A C
CIV CIV EV FS LT ST VP EV FS LT ST VP 34
. 2*SI *TV*201B 2*Sl*TV-202A 11548*CBM*089B
* 1 OF 4 B-2 AO GATE ACCUMULATORS TO WASTE GAS CHARCOAL FILTERS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*089k 1 OF 3 E*7 AO GATE UNIT 1 RWST TO UNIT 2 RWST CROSS TIE 1.00 2
8.00 2
A C
B 0
CIV  
*Ev FS LT ST VP EV FS ST VP 34 2*Sl*TV*202B 11548*CBM*089A 1 OF 3 E*7 AO GATE 8.00 2
UNIT 1 RWST TO UNIT 2 RWST CROSS TIE B
0 EV FS
. ST VP  
 
VALVE NUMBER 2*SS*TV-200A
-------------------------~--
DRAWING SHEET NUMBER NUMBER 11548-CBM-082A 2 OF 3 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT F-7 SO GATE
<i.375 1
A PRESSURIZER LIQUID SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLAllON VALVE ISO TEST VALVE TEST POS TYPE TYPE C
CIV EV FS LT ST VP PAGE:
53 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2-SS-TV-200B 2-SS-TV-201A 11548-CBM-082A 2 OF 3 F*6 SO GATE PRESSURIZER LIQUID SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 11548-CBM-082A 2 OF 3 E-7 SO GATE 0.375 PRESSURIZER.VAPOR SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLATION VALVE A
A C
CIV C
CIV EV FS LT ST VP EV FS LT ST VP 34 34
-------------------* ------------------~-----------------------------------------------------~-----------------------------
2-SS*TV-201B
2-SS*TV-201B
* 11548-CBM-082A   2 OF 3 E-6     SO GATE         0.375    1    A    C    CIV      EV FS LT ST    34 VP PRESSURIZER VAPOR SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOL~TION VALVE 2-SS-TV-202A      11548-CBM-082A   2 OF 3 D-7    SO GATE         0.375   1. A   C     CIV       EV FS
* 2-SS-TV-202A 2*SS*TV*202B 11548-CBM-082A 2 OF 3 E-6 SO GATE PRESSURIZER VAPOR SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOL~TION VALVE 11548-CBM-082A 2 OF 3 D-7 SO GATE REACTOR COOLANT COLD LEGS SAMPLE HEADER, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-082A 2 OF 3 D-6 SO GATE REACTOR COOLANT COLD LEGS SAMPLE HEADER, OUTSIDE CONTAINMENT ISOLATION VALVE RHR SAMPLE HEADER, INSIDE CONTAINMENT ISOLA*
                                                                                                        . LT ST     34 VP REACTOR COOLANT COLD LEGS SAMPLE HEADER, INSIDE CONTAINMENT ISOLATION VALVE 2*SS*TV*202B      11548-CBM-082A   2 OF 3 D-6     SO GATE         0.375         A   C     CIV       EV FS LT ST     34 VP
TION VALVE 0.375 1
                    ----------------------------------* ----------
0.375
REACTOR COOLANT COLD LEGS SAMPLE HEADER, OUTSIDE CONTAINMENT ISOLATION VALVE RHR SAMPLE HEADER, INSIDE CONTAINMENT ISOLA*
: 1.
TION VALVE
0.375 A
                                        --
C A
*
C A
  -- .-------   -------------------         -------------------. -------------------------------   -- - -----------------------
C CIV EV FS LT ST VP CIV EV CIV FS  
. LT ST VP EV FS LT ST VP 34 34 34 I
 
VALVE NUMBER 2-SS*TV-203B 2-SS-TV-204A
*VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE 11548*CBM*082A 2 OF 3 F-6 SO GATE RHR SAMPLE HEADER, OUTSIDE CONTAINMENT ISOLA-TION VALVE 11548*CBM*082A 2 OF 3 D-.7 SO GATE PRESSURIZER RELIEF tANK GAS SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLATION VALVE VALVE SIZE 0.375 ASME CLASS 2
0.375 2
CAT AE A
ISO TEST VALVE POS TYPE C
CIV C
CIV TEST TYPE LT VP EV FS LT ST VP PAGE:
54 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*
34
---------------------------------.-------------------------------------~--------------------------------------------------
2*SS*TV-204B 2*SS*TV*206A 2*SS*TV*206B 11548*CBM-082A 2 OF 3 C-6 SO GATE
. PRESSURIZER RELIEF TANK GAS SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*082A 2 OF 3 E-7 SO GATE REACTOR COOLANT HOT LEGS SAMPLE HEADER, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*082A 2 OF 3 E-6 SO GATE REACTOR COOLANT HOT LEGS SAMPLE HEADER, OUT*
SIDE CONTAINMENT ISOLATION VALVE 0.375 2
A 0.375 A
0.375 A
C CIV C
CIV C
CIV EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP 34 34 34  
 
VALVE NUMBER 2-SV-TV-202A DRAWING SHEET NUMBER NUMBER 11548-CBM-066A. 2 OF 3 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE.
ASME COOR TYPE SIZE CLASS CAT E-4 AO GATE 6.00 2
A CONDENSER AIR REMOVAL DISCHARGE TO CONTAIN-MENT, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C
CIV EV FS LT ST VP PAGE:
55 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-
 
VALVE NUMBER 2-SW-108 2-SW-113 2-SY-130 VIRGINIA PQl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAYING NUMBER SHEET DRYG VALVE NUMaER COOR TYPE 11548-CBM-071B 1 OF 2 B-4 CHECK VALVE CHARGING PUMP SERVICE YATER PUMP CHECK VALVE 11548-CBM-071B 1 OF 2 B-7 CHECK VALVE CHARGING PUMP SERVICE WATER PUMP CHECK VALVE 11548-CBM-071B 1 OF 2 D-7 CHECK VALVE CIRCULATING WATER TO DISCHARGE TUNNEL CHECK VALVE VALVE SIZE 2.00 ASME CLASS 3
2.00 3
2.00 3
CAT C
C C
TEST POS oc oc 0
ISO VALVE TEST TYPE TYPE CV CV CV PAGE:
56 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-SY-206 11548-CBM-071A 3 OF 3. E-8 MAN GATE CONTAINMENT ISOLATION VALVE FOR SERVICE YATER ORAi NS TO HEAT EXCHAIIGER 2.00 2
AE C
CIV LT 2-SY-208 2-SY-246 2-SY-247 2-SY-248 11548-CBM-071A 3 OF 3 E-8 MAN GATE CONTAINMENT ISOLATION VALVE FOR SERVICE YATER DRAINS TO HEAT EXCHANGER 11548-CBM*071A 3 OF 3 D-8 CHECK VALVE RECIRCULATION SPRAY.HEAT EXCHANGER SERVICE YATER RETURN VENT VALVE 11548-CBM-071A 3 OF 3 D-7 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 11548-CBM*071A. 3 OF 3 D-7 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE YATER RETURN VENT VALVE 2.00 2
3.00 NC 3.00 3
3.00 NC AE C
CIV LT C
0 CV C
0 CV 46 C
0 CV
-------.------------------------------------------. ----------------------------------------------------------------------~
2-SY-249 2-SY-250 11548-CBM-071A 3 OF 3 D-6 CHECK VALVE RECIRCULATION.SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 11548-CBM-071A
~ OF 3 D-6 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER RETURN VENT VALVE 3.00 3
3.00 NC C
0 CV 46 C
0 CV 2-SY-251 11548-CBM*071A 3*0F 3 D-6 CHECK. VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE
~ATER SUPPLY VENT VALVE 3.00 3
C 0
CV 46 2-SW-252 11548-CBM-071A 3 OF 3 D-5 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE YATER RETURN VENT V~LVE 3.00 NC C
0 CV
 
VALVE NUMBER 2*SW*253 2*SW*442 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548*CBM*071A 3 OF 3 D*S CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 11548*CBM-071B 1 OF 2 B-4 CHECK VALVE CHARGING PUMP SERVICE WATER PUMP DISCHARGE CHECK VALVE VALVE ASME SIZE CLASS CAT 3.00 3
C 2.00 3
C ISO TEST VALVE TEST POS TYPE TYPE 0
CV 0
CV PAGE:
57 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*
csv-VNC*
46
------------- *-----------------------------------------------------------------------------------------------------------~
2&deg;SW*445 2*SW-MOV*201A 2*SW*MOV*201B 2-SW*MOV*202A 11548*CBM*071B 1 OF 2 8*6 CHECK VALVE CHARGING PUMP SERVICE WATER PUMP DISCHARGE CHECK VALVE 11548-CBM*071A 3 OF 3 8*4 MO BFLY BEARING COOLING WATER HEAT EXCHANGER
* ISOLATION VALVE 11548*CBM*071A 3,0F 3 B-4 MO BFLY BEARING COOLING WATER HEAT EXCHANGER ISOLATION VALVE 11548*CBM*071A 2 OF 3 D*6 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO COMPONENT COOLING HEAT EXCHANGERS 2.00 3
C 36.00 3
B 36.00 3
B 42.00 3
B 0
C C
C CV EV ST VP EV ST VP EV ST VP 2*S\\J*MOV*202B 2*SW*MOV*203A 11548*CBM*071A 2 OF 3 D*S MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO COMPONENT COOLING HEAT EXCHANGERS 11548*CBM-071A 3 OF 3 8*8 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 42.00 3
30.00 3
B C
B 0
EV ST VP EV ST VP 2*SW*MOV*203B 11548*CBM*071A 3 OF 3 B*B MO BFLY*
SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 30.00 3
B 0
EV ST VP
 
VALVE NUMBER 2-SW-MOV-203C 2-SW-HOV-203D 2-SW-HOV-204A VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 1154S-CBM-071A 3 OF 3 B-3 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 1154S-CBM-.071A 3 OF 3 B-2 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 1154S-CBM-071A 3 OF 3 D-7 MO BFLY SERVICE WATER SUPPLY TO 11A11 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE VALVE SIZE 30.00 ASME CLASS 3
30.00 3
24.00 3
CAT B
B B
ISO TEST VALVE POS TYPE 0
0 QC TEST TYPE EV ST VP EV ST VP EV ST VP PAGE:
*sa OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-. VNC-
* 2-SW-HOV-204B 2-SW-HOV-204C 1154S-CBH-071A 3 OF 3 D-6 MO BFLY SERVICE WATER SUPPLY TO 11B" RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3 OF 3 D-5 MO BFLY SERVICE WATER SUPPLY TO "C" RECIRC SPRAY HEAT EXCHANGER, OUTSID.E CONT ISOLATION VALVE 24.00 3
24.00 3
B QC B
oc EV ST VP EV ST VP 2-SW-HOV-204D 2-SW-HOV-205A 2-SW-HOV-205B 115~8-CBH-071A 3 OF 3 D-4 HO BFLY SERVICE WATER SUPPLY TO 110 11 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3 OF 3 D-8 MO BFLY SERVICE WATER RETURN FROM "Ai, RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3 OF 3 D-7 MO BFLY SERVICE WATER RETURN FROM "B" RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 24.00 3
B 24.00 3
B 24.00 3
B oc QC oc EV ST VP EV ST VP EV ST VP
 
VALVE NUMBER 2-SW*MOV-205C 2-SW*MOV-205D VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM~071A 3 OF 3 D-6 MO BFLY SERVICE lolATER RETURN FROM 11C11 RECIRC SPRAY HEAT EXCHANGER,*OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3-0F 3 D-5 MO BFLY SERVICE WATER RETURN FROM 11011 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE VALVE SIZE 24.00 ASHE CLASS 3
24.00 3
CAT B
B 2-SW*TCV-208A
.11548-CBM-071B 1 OF 2 E-7 AO GATE 1.5 3
B SERVICE WATER TO CH.ARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE ISO TEST VALVE POS TYPE oc oc 0
TEST TYPE EV ST VP EV ST VP EV FS ST PAGE:
59 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-47 2-SW-TCV-208B 2-SW-TCV-208C 11548-CBM-071B 1 OF 2 E-5 AO GATE SERVICE WATER TO CHARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE 11548-CBM-071B 1 OF 2 E-4 AO GATE SERVICE WATER TO CHARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE 1.5 3
1.5 3
B 0
B 0
EV FS ST EV FS ST 47 47
 
VALVE NUMBER 2-VA-001 2-VA-009 VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRAIJING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548*CBM-083B 3 OF 3 F-3 MAN GATE VENT LINE FROM PRIMARY VENT POT, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM-083B 3 OF 3 F-4 MAN GATE VENT LINE FROM PRIMARY VENT POT, INSIDE CONTAINMENT ISOLATION VALVE 2.00 2
2.00 2
* AE C
CIV LT AE C
CIV LT PAGE:
60 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V*
CSV-VNC-
 
VALVE NUMBER 2*VG*TV-209A DRAWING SHEET NUMBER NUMBER 11548-CBH-083B 1 OF 3 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT E-3 AO GATE 2.00 2
A VENT LINE !SOL FROM PRIMARY DRAINS TRANSFER TANK TO GAS STRIPPERS, INSIDE CONT !SOL VLV ISO TEST VALVE TEST POS TYPE TYPE C
CIV EV FS LT ST VP PAGE:
61 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2*VG-TV-209B 11548-CBH-083A 2 OF 2 F-3 AO GATE VENT LINE !SOL FROM PRIMARY DRAINS TRANSFER TANK TO GAS STRIPPERS, OUTSIDE CONT !SOL VLV 2.00 2
A C
CIV EV FS LT ST VP 34
 
VALVE NUMBER VIRGINIA POYER COMPANY SURRY UNIT 2 SECOND INSPECTI~ INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMF,ER COOR TYPE SIZE CLASS CAT 1154S-CBM-066A 2 OF 3 F-4 CHECK VALVE 6.00 2
AC CONDENSER AIR REMOVAL DISCHARG TO CONTAINMENT INSIDE CONTAIN ISOLATION CHECK VALVE ISO TEST VALVE POS TYPE C
CIV TEST TYPE CV LT PAGE:
62 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-
- CSV*
VNC*
44
 
VALVE NUMBER 2-VS-HOV-200A 2-VS-HOV-200B 2-VS-HOV-200C 2-VS-HOV-2000 2-VS-HOV-201
*. 2-VS*HOV-202 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING. PROGRAM - VALVE TABLE ISO DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASHE TEST VALVE TEST CLASS CAT PCS TYPE TYPE 11548-CBB-006A 1 OF 2 C-7 MO BFLY CONTAINMENT PURGE SUPPLY, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF 2 C-8 MO BFLY CONTAINMENT PURGE SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF_2 D-7 MO BFLY CONTAINMENT PURGE EXHAUST, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF 2 D-8 MO BFLY
. CONTAINMENT PURGE EXHAUST, OUTSIDE CONTAIN-MENT ISOLATION VALVE 11548*CBB-006A 1 OF 2 D-7 MO BFLY CONTAINMENT PURGE BYPASS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF 2 C-7 MO BFLY CONTAINMENT VACUUM BREAKER 36.00 2
AE C
36.00 2
AE C
36.00 2
AE C
36.00 2
AE C
8.00 2
AE C
18.00 2
AE C
CIV CIV CIV
* CIV CIV CIV LT VP LT VP LT VP LT VP LT VP LT VP PAGE:
63 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*
39 39 39 39 39 39
 
4.5 VALVE TEST PROGRAM RELIEF REQUEST S2PV-5R3 Relief Requests identify code requirements which-are impractical for Surry Unit 2 _and provide justification for the requested exception.
Where appropriate, alternate testing to be performed in lieu of code requirements is proposed.
4-7 Rev. 3 March 19, 1992


                                                          *VIRGINIA POIJER COMPANY                            PAGE:  54 OF 63
RELIEF REQUEST V-1 System Various Valve(s):
* SURRY UNIT 2                                  REVISION: 03 SECOND INSPECTION INTERVAL                          DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO          REL  COLD ALT VALVE            DRAWING          SHEET DRIJG VALVE              VALVE    ASME      TEST VALVE TEST    REQ  SHUT TEST NUMBER            NUMBER          NUMBER COOR TYPE                SIZE      CLASS CAT  POS TYPE  TYPE    v-  csv- VNC*
All safety and relief valves category:
2-SS*TV-203B      11548*CBM*082A  2 OF 3  F-6    SO GATE          0.375    2    AE  C    CIV  LT VP RHR SAMPLE HEADER, OUTSIDE CONTAINMENT ISOLA-TION VALVE 2-SS-TV-204A      11548*CBM*082A  2 OF 3  D-.7    SO GATE          0.375    2    A    C    CIV  EV FS LT ST      34 VP PRESSURIZER RELIEF tANK GAS SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLATION VALVE
Class  
  --------------------------------- .-------------------------------------~--------------------------------------------------
*Function:
2*SS*TV-204B      11548*CBM-082A  2 OF 3 C-6      SO GATE          0.375    2    A    C    CIV  EV FS LT ST      34 VP
                  . PRESSURIZER RELIEF TANK GAS SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*SS*TV*206A      11548*CBM*082A  2 OF 3 E-7      SO GATE          0.375          A    C    CIV  EV
* FS LT ST      34 VP REACTOR COOLANT HOT LEGS SAMPLE HEADER, INSIDE CONTAINMENT ISOLATION VALVE 2*SS*TV*206B      11548-CBM*082A  2 OF 3 E-6      SO GATE          0.375          A    C    CIV  EV FS LT                    '
ST      34 VP REACTOR COOLANT HOT LEGS SAMPLE HEADER, OUT*
SIDE CONTAINMENT ISOLATION VALVE
* VIRGINIA POWER COMPANY                                PAGE:  55 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE              VALVE. ASME        TEST VALVE    TEST    REQ SHUT TEST NUMBER          NUMBER          NUMBER COOR TYPE              SIZE    CLASS CAT POS TYPE        TYPE    v- csv- VNC-2-SV-TV-202A    11548-CBM-066A . 2 OF 3 E-4    AO GATE            6.00  2      A    C      CIV    EV FS LT ST VP CONDENSER AIR REMOVAL DISCHARGE TO CONTAIN-MENT, OUTSIDE CONTAINMENT ISOLATION VALVE
  -------------------------------------------------------------.---------------------------* --------------------------------
**
* VIRGINIA PQl,IER COMPANY                              PAGE:  56 OF 63 SURRY UNIT 2                                      REVISION: 03
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE              DRAYING          SHEET DRYG VALVE              VALVE      ASME        TEST VALVE  TEST    REQ SHUT TEST NUMBER            NUMBER            NUMaER COOR TYPE              SIZE      CLASS CAT  POS TYPE    TYPE    v- csv- VNC-
                                                                                                                  --- ----
2-SW-108          11548-CBM-071B    1 OF 2 B-4    CHECK VALVE        2.00  3      C  oc          CV CHARGING PUMP SERVICE YATER PUMP CHECK VALVE 2-SW-113          11548-CBM-071B    1 OF 2 B-7    CHECK VALVE        2.00  3      C  oc          CV CHARGING PUMP SERVICE WATER PUMP CHECK VALVE 2-SY-130          11548-CBM-071B    1 OF 2 D-7    CHECK VALVE        2.00  3      C  0            CV CIRCULATING WATER TO DISCHARGE TUNNEL CHECK VALVE
  -------------------------*  -------------*-------------------------------------------------- *-------------------------------
11548-CBM-071A 3 OF 3. E-8 MAN GATE 2-SY-206                                                                2.00  2      AE  C    CIV    LT CONTAINMENT ISOLATION VALVE FOR SERVICE YATER ORAi NS TO HEAT EXCHAIIGER
                                                                                                .
  --------------------------------------------------------------------------------------------------------------------------
11548-CBM-071A 3 OF 3 E-8 MAN GATE
                                                                                        '
2-SY-208                                                                2.00  2      AE  C    CIV    LT CONTAINMENT ISOLATION VALVE FOR SERVICE YATER DRAINS TO HEAT EXCHANGER 2-SY-246          11548-CBM*071A    3 OF 3 D-8    CHECK VALVE        3.00  NC      C  0            CV
* 2-SY-247 RECIRCULATION SPRAY .HEAT EXCHANGER SERVICE YATER RETURN VENT VALVE 11548-CBM-071A    3  OF 3 D-7    CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 3.00  3      C  0            CV      46 2-SY-248          11548-CBM*071A. 3 OF 3 D-7      CHECK VALVE        3.00  NC      C  0            CV RECIRCULATION SPRAY HEAT EXCHANGER SERVICE YATER RETURN VENT VALVE
  -------.------------------------------------------.
2-SY-249
                                                          ----------------------------------------------------------------------~
11548-CBM-071A 3 OF 3 D-6 CHECK VALVE                3.00 3        C  0            CV      46
                    . ---------------------------------------------
RECIRCULATION .SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 2-SY-250          11548-CBM-071A    ~  OF 3 D-6    CHECK VALVE        3.00    NC      C  0            CV RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER RETURN VENT VALVE
  -- *-----------------------------------------------------------------------------------------------------------------------
2-SY-251          11548-CBM*071A 3*0F 3 D-6 CHECK. VALVE              3.00 3        C    0            CV      46 RECIRCULATION SPRAY HEAT EXCHANGER SERVICE
                      ~ATER SUPPLY VENT VALVE
  .------------------------------------------------------------------------------------
2-SW-252          11548-CBM-071A 3 OF 3 D-5 CHECK VALVE
                                                                                            *-------------------------------------
3.00    NC    C    0            CV RECIRCULATION SPRAY HEAT EXCHANGER SERVICE YATER RETURN VENT V~LVE
* VIRGINIA POWER COMPANY                                PAGE:  57 OF 63 SURRY UNIT 2                                      REVISION: 03
* SECOND INSPECTION INTERVAL                              DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO            REL  COLD ALT VALVE            DRAWING          SHEET DRWG VALVE              VALVE    ASME        TEST  VALVE  TEST    REQ  SHUT TEST NUMBER            NUMBER          NUMBER COOR TYPE              SIZE    CLASS  CAT  POS  TYPE  TYPE    V*  csv- VNC*
2*SW*253          11548*CBM*071A  3 OF 3 D*S    CHECK VALVE      3.00  3      C    0            CV      46
                    ---------------------------------------------
RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 2*SW*442          11548*CBM-071B  1 OF 2 B-4    CHECK VALVE      2.00  3      C    0            CV CHARGING PUMP SERVICE WATER PUMP DISCHARGE CHECK VALVE
  ------------- *-----------------------------------------------------------------------------------------------------------~
2&deg;SW*445          11548*CBM*071B  1 OF 2 8*6    CHECK VALVE      2.00  3      C    0            CV CHARGING PUMP SERVICE WATER PUMP DISCHARGE CHECK VALVE 2*SW-MOV*201A    11548-CBM*071A  3 OF 3 8*4    MO BFLY          36.00  3      B    C            EV ST VP BEARING COOLING WATER HEAT EXCHANGER
* ISOLATION VALVE 2*SW*MOV*201B    11548*CBM*071A  3,0F 3 B-4    MO BFLY          36.00  3      B    C            EV ST VP
* BEARING COOLING WATER HEAT EXCHANGER ISOLATION VALVE 2-SW*MOV*202A    11548*CBM*071A  2 OF 3 D*6    MO BFLY          42.00  3      B    C            EV ST VP SERVICE WATER HEADER SUPPLY ISOLATION TO COMPONENT COOLING HEAT EXCHANGERS
  -------------------------------------------------------,
2*S\J*MOV*202B    11548*CBM*071A 2 OF 3 D*S MO BFLY
                                                            ------------------------------------------*
42.00 3        B    C
                                                                                                        -----------------------
EV ST VP SERVICE WATER HEADER SUPPLY ISOLATION TO COMPONENT COOLING HEAT EXCHANGERS 2*SW*MOV*203A    11548*CBM-071A  3 OF 3 8*8    MO BFLY          30.00  3      B    0            EV ST VP
                    -----------------------------------------* ---
SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS
  --------------------------------------------------------------------------------------------------------------------------
2*SW*MOV*203B    11548*CBM*071A 3 OF 3 B*B MO BFLY*              30.00 3        B    0            EV ST VP SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS
* VIRGINIA PO\IER COMPANY                            PAGE: *sa OF 63
* SURRY UNIT 2                                    REVISION: 03 SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL COLD ALT VALVE            DRAWING          SHEET DRWG VALVE                VALVE    ASME      TEST VALVE TEST    REQ SHUT TEST NUMBER          NUMBER            NUMBER COOR TYPE                SIZE      CLASS CAT POS TYPE    TYPE    v- csv- . VNC-
* 2-SW-MOV-203C    1154S-CBM-071A    3 OF 3 B-3      MO BFLY          30.00    3    B    0          EV ST VP SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 2-SW-HOV-203D    1154S-CBM-.071A  3 OF 3 B-2      MO BFLY          30.00    3    B    0          EV ST VP SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 2-SW-HOV-204A    1154S-CBM-071A    3 OF 3  D-7    MO BFLY          24.00    3    B    QC        EV ST VP SERVICE WATER SUPPLY TO 11 A11 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE
  ------------------------------------------------------------------------------------------------------
QC        EV
                                                                                                          *-------------------
2-SW-HOV-204B    1154S-CBH-071A    3 OF 3 D-6      MO BFLY          24.00    3    B ST VP
* SERVICE WATER SUPPLY TO 11 B" RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 2-SW-HOV-204C    11548-CBM-071A    3 OF 3 D-5      MO BFLY          24.00    3    B    oc        EV ST VP SERVICE WATER SUPPLY TO "C" RECIRC SPRAY HEAT EXCHANGER, OUTSID.E CONT ISOLATION VALVE
  ---------------------------------------------------------------------------------------------------*-----------------------
2-SW-HOV-204D    115~8-CBH-071A    3 OF 3 D-4      HO BFLY          24.00    3    B    oc        EV ST VP SERVICE WATER SUPPLY TO 110 11 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 2-SW-HOV-205A    11548-CBM-071A    3 OF 3 D-8      MO BFLY          24.00    3    B    QC        EV ST VP
                  -------------------------. -----------, -------
SERVICE WATER RETURN FROM "Ai, RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 2-SW-HOV-205B    11548-CBM-071A    3 OF 3 D-7      MO BFLY          24.00    3    B    oc        EV ST VP SERVICE WATER RETURN FROM "B" RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE
* VIRGINIA POIJER COMPANY                        PAGE:  59 OF 63
* SURRY UNIT 2                                REVISION: 03 SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO        REL  COLD ALT VALVE            DRAWING            SHEET DRWG VALVE                VALVE    ASHE      TEST VALVE TEST  REQ  SHUT TEST NUMBER            NUMBER            NUMBER COOR TYPE                SIZE      CLASS CAT POS  TYPE  TYPE  v-  csv- VNC-2-SW*MOV-205C    11548-CBM~071A    3 OF 3 D-6      MO BFLY          24.00    3    B  oc        EV ST VP SERVICE lolATER RETURN FROM 11 C11 RECIRC SPRAY HEAT EXCHANGER,*OUTSIDE CONT ISOLATION VALVE 2-SW*MOV-205D    11548-CBM-071A    3-0F 3 D-5      MO BFLY          24.00    3    B  oc        EV ST VP SERVICE WATER RETURN FROM 110 11 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 2-SW*TCV-208A    .11548-CBM-071B    1 OF 2 E-7      AO GATE            1.5    3    B  0          EV FS ST    47 SERVICE WATER TO CH.ARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE
  -------------------------------------------------------------------- *-----------------------------------------------------
2-SW-TCV-208B    11548-CBM-071B    1 OF 2 E-5      AO GATE            1.5    3    B  0          EV FS ST    47
* SERVICE WATER TO CHARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE 2-SW-TCV-208C    11548-CBM-071B    1 OF 2 E-4      AO GATE            1.5    3    B  0          EV FS ST    47 SERVICE WATER TO CHARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE
* VIRGINIA PO'JER COMPANY                          PAGE:  60 OF 63 SURRY UNIT 2                                REVISION: 03
* SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM* VALVE TABLE NC ISO        REL  COLD ALT VALVE    DRAIJING        SHEET DRIJG VALVE            VALVE    ASME        TEST VALVE TEST REC  SHUT TEST NUMBER  NUMBER          NUMBER COOR TYPE              SIZE      CLASS  CAT POS  TYPE  TYPE V*  CSV- VNC-2-VA-001 11548*CBM-083B  3 OF 3 F-3    MAN GATE          2.00  2
* AE  C    CIV  LT VENT LINE FROM PRIMARY VENT POT, OUTSIDE CONTAINMENT ISOLATION VALVE 2-VA-009 11548*CBM-083B  3 OF 3 F-4    MAN GATE          2.00  2      AE  C    CIV  LT VENT LINE FROM PRIMARY VENT POT, INSIDE CONTAINMENT ISOLATION VALVE
*
* VIRGINIA POWER COMPANY                              PAGE:    61 OF 63 SURRY UNIT 2                                    REVISION: 03
* SECOND INSPECTION INTERVAL                            DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO            REL  COLD ALT VALVE            DRAWING          SHEET  DRWG VALVE            VALVE    ASME        TEST  VALVE  TEST    REQ  SHUT TEST NUMBER          NUMBER          NUMBER  COOR TYPE            SIZE    CLASS  CAT  POS  TYPE  TYPE    v-    csv- VNC-2*VG*TV-209A    11548-CBH-083B  1 OF 3 E-3    AO GATE          2.00  2      A    C    CIV    EV FS LT ST      34 VP VENT LINE !SOL FROM PRIMARY DRAINS TRANSFER TANK TO GAS STRIPPERS, INSIDE CONT !SOL VLV
  --------------------------------------------------------------------------------------------------------------* -----------
2*VG-TV-209B    11548-CBH-083A  2 OF 2 F-3    AO GATE          2.00  2      A    C    CIV    EV FS LT ST      34 VP VENT LINE !SOL FROM PRIMARY DRAINS TRANSFER TANK TO GAS STRIPPERS, OUTSIDE CONT !SOL VLV
*
* VIRGINIA POYER COMPANY                          PAGE:  62 OF 63 SURRY UNIT 2                                REVISION: 03
* SECOND INSPECTI~ INTERVAL                        DATE: 3/19/92 INSERVICE TESTING PROGRAM - VALVE TABLE NC ISO        REL COLD ALT VALVE  DRAWING          SHEET DRWG VALVE              VALVE    ASHE        TEST VALVE TEST REQ SHUT TEST NUMBER NUMBER          NUMF,ER COOR TYPE            SIZE    CLASS CAT POS    TYPE  TYPE V- - CSV* VNC*
1154S-CBM-066A  2 OF 3 F-4    CHECK VALVE      6.00  2      AC  C    CIV  CV  44 LT
          ---------------------------------------------
CONDENSER AIR REMOVAL DISCHARG TO CONTAINMENT INSIDE CONTAIN ISOLATION CHECK VALVE
-*
* VIRGINIA POWER COMPANY                          PAGE:  63 OF 63
* SURRY UNIT 2                                REVISION: 03 SECOND INSPECTION INTERVAL                        DATE: 3/19/92 INSERVICE TESTING. PROGRAM - VALVE TABLE NC ISO      REL  COLD ALT VALVE          DRAWING          SHEET DRWG VALVE              VALVE    ASHE        TEST VALVE TEST REQ  SHUT TEST NUMBER          NUMBER          NUMBER COOR TYPE              SIZE    CLASS CAT PCS TYPE    TYPE v-  csv- VNC*
2-VS-HOV-200A  11548-CBB-006A  1 OF 2 C-7    MO BFLY          36.00  2      AE  C    CIV  LT  39 VP CONTAINMENT PURGE SUPPLY, INSIDE CONTAINMENT ISOLATION VALVE 2-VS-HOV-200B  11548-CBB-006A  1 OF 2 C-8    MO BFLY          36.00  2      AE  C    CIV  LT  39 VP CONTAINMENT PURGE SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 2-VS-HOV-200C  11548-CBB-006A  1 OF_2 D-7    MO BFLY          36.00  2      AE  C    CIV  LT  39 VP CONTAINMENT PURGE EXHAUST, INSIDE CONTAINMENT ISOLATION VALVE 2-VS-HOV-2000  11548-CBB-006A  1 OF 2 D-8    MO BFLY          36.00  2      AE  C
* CIV  LT  39 VP
                  . CONTAINMENT PURGE EXHAUST, OUTSIDE CONTAIN-MENT ISOLATION VALVE 2-VS-HOV-201    11548*CBB-006A  1 OF 2 D-7    MO BFLY            8.00  2      AE  C    CIV  LT  39
* VP CONTAINMENT PURGE BYPASS, OUTSIDE CONTAINMENT ISOLATION VALVE
  . 2-VS*HOV-202    11548-CBB-006A  1 OF 2 C-7    MO BFLY          18.00  2      AE  C    CIV  LT  39 VP CONTAINMENT VACUUM BREAKER
* 4.5 VALVE TEST PROGRAM RELIEF REQUEST Relief Requests identify code requirements which-are impractical for Surry Unit 2 _and provide justification for the requested exception. Where appropriate, alternate testing to be performed in lieu of code requirements is proposed .
*
* S2PV-5R3 4-7 Rev. 3 March 19, 1992
* System Valve(s):
Various RELIEF REQUEST V-1 All safety and relief valves category:
Class
  *Function:
Section XI Code Requirement For Which Relief Is Requested Safety and relief valve setpoints are tested in accordanc~ with PTC-25.3-1976 as directed by IWV..,;3512.
Section XI Code Requirement For Which Relief Is Requested Safety and relief valve setpoints are tested in accordanc~ with PTC-25.3-1976 as directed by IWV..,;3512.
Basis For Request The American National Standard, ANSI/ASME OM 1981, Requirements for Inservice Performance Testing of Nuclear Power Plant Pressure Relief Devices, is approved for use in the 1986 Edition of ASME Section XI, Subsection IWV. OM-1.represents
Basis For Request The American National Standard, ANSI/ASME OM 1981, Requirements for Inservice Performance Testing of Nuclear Power Plant Pressure Relief Devices, is approved for use in the 1986 Edition of ASME Section XI, Subsection IWV.
* current industry practices for tesiing relief valves and is a better standard for setpoint testing than PTC-25.3-1976.
OM-1.represents current industry practices for tesiing relief valves and is a better standard for setpoint testing than PTC-25.3-1976.
Alternate Testing-Proposed Safety and relief valves will be tested in accordance with ANSI/ASME OM 1981 .
Alternate Testing-Proposed Safety and relief valves will be tested in accordance with ANSI/ASME OM 1981.
* S2PV-5R3 4-8 Rev. 3 March 19, 1992
4-8 S2PV-5R3 Rev. 3 March 19, 1992  
* RELIEF REQUEST V-2 Replaced by Cold Shutdown Justification CSV-1 RELIEF REQUEST V-3 Replaced by Cold Shutdown Justification CSV-2 RELIEF REQUEST V-4 Replaced by Cold Shutdown Justification CSV-4
 
*
S2PV-5R3 RELIEF REQUEST V-2 Replaced by Cold Shutdown Justification CSV-1 RELIEF REQUEST V-3 Replaced by Cold Shutdown Justification CSV-2 RELIEF REQUEST V-4 Replaced by Cold Shutdown Justification CSV-4 4-9 Rev. 3 March.19, 1992  
* S2PV-5R3 4-9 Rev. 3 March.19, 1992
 
* RELIEF REQUEST V-5 System     Feedwater Valve(s):   2-FW-10 2-FW-41 2-FW-72 category:   c Class       2 Function:   Main Feedwater check valves at Containment Penetrations.
RELIEF REQUEST V-5 System Feedwater Valve(s):
2-FW-10 2-FW-41 2-FW-72 category:
c Class 2
Function:
Main Feedwater check valves at Containment Penetrations.
Section XI Code Requirement For Which Relief Is Requested Exercise valve every three months.
Section XI Code Requirement For Which Relief Is Requested Exercise valve every three months.
Basis For Request Clos.ure of these valves during power operation would require securing feedwater which would result in reactor trip. Cold
Basis For Request Clos.ure of these valves during power operation would require securing feedwater which would result in reactor trip.
* shutdown testing of valves using flow to verify closure is inconclusive due to the inability to establish adequate differential pressure across the valve disc.
Cold shutdown testing of valves using flow to verify closure is inconclusive due to the inability to establish adequate differential pressure across the valve disc.
A test was conducted in an effort to verify whether closure of these valves can be determined using flow. Because there is no isolation boundary between the steam generators and the valves, the test volume must include the steam generators. A steam generator was pressurized with a nitrogen blanket to approximately 5 psig. The 0.75 inch drain valve just upstream of the check valve was opened and flow was observed. The 14 inch check valve did not stop the back flow through the vent. It was concluded that the flow was inadequate to seat the check valve completely. Just a small gap between the disc and the seat was sufficient to create a flow area equa+ to or greater than the flow area through the drain. T}1erefore, the pressure differential associated with the back flow is being created across the drain valve and not the disc of the check valve.
A test was conducted in an effort to verify whether closure of these valves can be determined using flow.
The above test proved to be inconclusive because of the inability to establish a sufficient .differential pressure across the disc.
Because there is no isolation boundary between the steam generators and the valves, the test volume must include the steam generators.
The only way to increase the differential pressure is to increase the flow area from the test volume. However, this is not*
A steam generator was pressurized with a nitrogen blanket to approximately 5 psig.
achievable for the existing configuration. Immediately upstrea~
The 0.75 inch drain valve just upstream of the check valve was opened and flow was observed.
of the drain valve is another 14 inch check valve, so the only
The 14 inch check valve did not stop the back flow through the vent.
* available flow area from the test volume is the drain valve .
It was concluded that the flow was inadequate to seat the check valve completely. Just a small gap between the disc and the seat was sufficient to create a flow area equa+ to or greater than the flow area through the drain.
4-10 S2PV-5R3                                             Rev. 3 March 19, 1992
T}1erefore, the pressure differential associated with the back flow is being created across the drain valve and not the disc of the check valve.
* RELIEF REQUEST V-5 (Cont.)
The above test proved to be inconclusive because of the inability to establish a sufficient.differential pressure across the disc.
Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled every reactor refueling. A different valve will be disassembled every reactor refueling .
The only way to increase the differential pressure is to increase the flow area from the test volume.
*
However, this is not*
* S2PV-5R3 4-11 Rev. 3 March 19, 1992
achievable for the existing configuration.
* RELIEF REQUEST V-6 Relief Request Withdrawn RELIEF REQUEST V-7 Replaced by Cold Shutdown CSV-5 RELIEF REQUEST V-8 Replaced by Cold Shutdown Justification CSV-6 RELIEF REQUEST V-9
Immediately upstrea~
* Replaced by Cold Shutdown Justification CSV-20 RELIEF REQUEST V-10 Replaced by Cold Shutdown Justification CSV-23 RELIEF REQUEST V-11 Replaced by Cold Shutdown Justification CSV-8
of the drain valve is another 14 inch check valve, so the only available flow area from the test volume is the drain valve.
* S2PV-5R3 4-12, Rev. 3 March 19, 1992
4-10 S2PV-5R3 Rev. 3 March 19, 1992  
* RELIEF REQUEST V-12 Replaced by Cold Shutdown Justification CSV-9 RELIEF REQUEST V-13 Replaced by Cold Shutdown Justification csv-10
 
*
RELIEF REQUEST V-5 (Cont.)
* S2PV-5R3 4-13 Rev. 3 March 19, 1992
Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled every reactor refueling.
* system Valve(s}:
A different valve will be disassembled every reactor refueling.
:
4-11 S2PV-5R3 Rev. 3 March 19, 1992  
RELIEF REQUEST V-14 Chemical and Volume Control 2-CH-258 2-CH-267 2-CH-276 category:   c Class   :  2 Function:   Charging Pump Discharge Check Valve Section XI Code Requirement For Which Relief Is Requested Exercise valves every three moriths.
 
Basis- For Request With present plant design, these valves can only be partial stroke exercised during power operation because the charging     .
RELIEF REQUEST V-6 Relief Request Withdrawn RELIEF REQUEST V-7 Replaced by Cold Shutdown CSV-5 RELIEF REQUEST V-8 Replaced by Cold Shutdown Justification CSV-6 RELIEF REQUEST V-9 Replaced by Cold Shutdown Justification CSV-20 RELIEF REQUEST V-10 Replaced by Cold Shutdown Justification CSV-23 RELIEF REQUEST V-11 Replaced by Cold Shutdown Justification CSV-8 4-12, S2PV-5R3 Rev. 3 March 19, 1992  
pumps cannot achieve design accident flow when pumping into the
 
* Reactor Coolant System at operating pressure. The only available flow path t.o test these valves is into the reactor coolant system. During cold shutdown, stroke exercising these valves could result in an overpressurization of the Reactor Coolant System and could force a safety system to function.
RELIEF REQUEST V-12 Replaced by Cold Shutdown Justification CSV-9 RELIEF REQUEST V-13 Replaced by Cold Shutdown Justification csv-10 4-13 S2PV-5R3 Rev. 3 March 19, 1992  
Alternate.Testing Proposed These valves will be partially stroked every three months and full flow tested each refueling .
 
* S2PV-5R3 4-14 Rev. 3 March 19, 1992
RELIEF REQUEST V-14 system Chemical and Volume Control Valve(s}:
* RELIEF REQUEST V-15 Replaced by Cold Shutdown Justification CSV-11 RELIEF REQUEST V-16 Replaced by Cold Shutdown Justification CSV-12 RELIEF REQUEST V-17 Replaced by Cold Shutdown Justification CSV-13 RELIEF REQUEST V-18
2-CH-258 2-CH-267 2-CH-276 category:
* Replaced by Cold Shutdown Justification CSV-15 RELIEF REQUEST V-19 Replaced by Cold Shutdown Justification CSV-16
c Class 2
-. S2PV-5R3 4-15 Rev. 3 March 19, 1992
Function:
* system Valve(s): 2-SI-56
Charging Pump Discharge Check Valve Section XI Code Requirement For Which Relief Is Requested Exercise valves every three moriths.
                        . RELIEF REQUEST V-2 0 Safety Injection 2-SI-47 category: c Class     2 Function: Low Head Safety Injection Pump suction from Containment Sump Check Valve Section XI Code Requirement   .
Basis-For Request With present plant design, these valves can only be partial stroke exercised during power operation because the charging pumps cannot achieve design accident flow when pumping into the Reactor Coolant System at operating pressure.
For Which Relief Is Requested Exercise valves every three months.
The only available flow path t.o test these valves is into the reactor coolant system.
During cold shutdown, stroke exercising these valves could result in an overpressurization of the Reactor Coolant System and could force a safety system to function.
Alternate.Testing Proposed These valves will be partially stroked every three months and full flow tested each refueling.
4-14 S2PV-5R3 Rev. 3 March 19, 1992  
 
RELIEF REQUEST V-15 Replaced by Cold Shutdown Justification CSV-11 RELIEF REQUEST V-16 Replaced by Cold Shutdown Justification CSV-12 RELIEF REQUEST V-17 Replaced by Cold Shutdown Justification CSV-13 RELIEF REQUEST V-18 Replaced by Cold Shutdown Justification CSV-15 RELIEF REQUEST V-19 Replaced by Cold Shutdown Justification CSV-16 4-15 S2PV-5R3 Rev. 3 March 19, 1992  
 
. RELIEF REQUEST V-2 0 system Safety Injection Valve(s):
2-SI-56 2-SI-47 category:
c Class 2
Function:
Low Head Safety Injection Pump suction from Containment Sump Check Valve Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.
Basis For Request To partial or full flow test these valves requires taking suction from the reactor containment sump which contains untreated water.
Basis For Request To partial or full flow test these valves requires taking suction from the reactor containment sump which contains untreated water.
This water should not be introduced into the system.
This water should not be introduced into the system.  
~ Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling.
~
A different valve will be disassembled every reactor refueling .
Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling.
* S2PV-5R3 4-16 Rev. 3 March 19, 1992
A different valve will be disassembled every reactor refueling.
* System Valve(s):
4-16 S2PV-5R3 Rev. 3 March 19, 1992  
:
 
RELIEF REQUEST V-21 Safety Injection Valves affected by this request are identified in Table F.
RELIEF REQUEST V-21 System Safety Injection Valve(s):
Category:
Valves affected by this request are identified in Category:
Class Function:
Class Function:
Table F.
Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.
Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.
Basis For Request These valves cannot be full stroke exercised during plant power operation. The only full flow path is into the Reactor Coolant System and Low Head Safety -Injection pumps cannot overcome Reactor Coolant System operating pressure. These valves will be
Basis For Request These valves cannot be full stroke exercised during plant power operation.
* partially stroked every three months through the pump recirculation line. During cold shutdown, the Reactor Coolant System pressure still prevents full flow testing of the ch~ck valve. During cold* shutdown, the charging flow could cause an
The only full flow path is into the Reactor Coolant System and Low Head Safety -Injection pumps cannot overcome Reactor Coolant System operating pressure.
These valves will be partially stroked every three months through the pump recirculation line.
During cold shutdown, the Reactor Coolant System pressure still prevents full flow testing of the ch~ck valve.
During cold* shutdown, the charging flow could cause an
* overpressurization condition.
* overpressurization condition.
Testing valves 2-SI-50 and 327 to the closed position requires isolating.the suction lines to the low head safety injection pumps, venting on the upstream side of the valve being tested, starting the pump on the other path, checking for leakage and then repeating the process for the other valve. This test can take up to a hour to complete and places the unit into a LCO per Technical Specification 3.3 if performed during normal operation.
Testing valves 2-SI-50 and 327 to the closed position requires isolating.the suction lines to the low head safety injection pumps, venting on the upstream side of the valve being tested, starting the pump on the other path, checking for leakage and then repeating the process for the other valve.
This test can take up to a hour to complete and places the unit into a LCO per Technical Specification 3.3 if performed during normal operation.
Alternate Testing Proposed These valves will be partially stroked every three months and full stroked every refueling.
Alternate Testing Proposed These valves will be partially stroked every three months and full stroked every refueling.
Valves 2-SI-50 and 327 will be tested to the closed position every cold shutdown .
Valves 2-SI-50 and 327 will be tested to the closed position every cold shutdown.
* S2PV-5R3 4-17 Rev. 3 March 19, 1992
4-17 S2PV-5R3 Rev. 3 March 19, 1992  
* Valve RELIEF REQUEST V-21 (Cont.)
 
Category TABLE F Class Function 2-SI-46A,B  C          2      Low Head Safety Injection Pump Suction from Refueling Water Storage Tank Check 2-SI-50    C          2      Low Head Safety Injection 2-SI-327                      Pump Discharge Check
Valve 2-SI-46A,B 2-SI-50 2-SI-327 S2PV-5R3 RELIEF REQUEST V-21 (Cont.)
*
TABLE F Category C
* S2PV-5R3 4-18 Rev. 3 March 19, 1992
C Class Function 2
* RELIEF REQUEST V-22 Replaced by Cold Shutdown Justification CSV-17 RELIEF REQUEST V-23 Replaced by Cold Shutdown Justification CSV-25 RELIEF REQUEST V-24 Replaced by Cold Shutdown Justification CSV-18 RELIEF REQUEST V-25
Low Head Safety Injection Pump Suction from Refueling Water Storage Tank Check 2
* Relief Request Withdrawn
Low Head Safety Injection Pump Discharge Check 4-18 Rev. 3 March 19, 1992  
* S2PV-6R3 4-19 Rev. 3 March 19, 1992
 
* System Valve(s):   2-SI-107 RELIEF REQUEST V-26 Safety Injection 2-sI..:109 2-SI-128    2-SI-130 2-SI-145    2-SI-147 category:  C Class      1 Function: Accumulator Discharge Check Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.
RELIEF REQUEST V-22 Replaced by Cold Shutdown Justification CSV-17 RELIEF REQUEST V-23 Replaced by Cold Shutdown Justification CSV-25 RELIEF REQUEST V-24 Replaced by Cold Shutdown Justification CSV-18 RELIEF REQUEST V-25 Relief Request Withdrawn 4-19 S2PV-6R3 Rev. 3 March 19, 1992  
Basis For Request These valves cannot be partial or full flow tested during normal operation because the accumulator pressure (600 t9 650 psig) is below Reactor Coolant System pressure and the injection of
 
** borated water would upset the reactor coolant chemistry. During cold shutdown, the RCS pressure still prevents full flow testing.
RELIEF REQUEST V-26 System Safety Injection Valve(s):
To achieve full flow*through the valves during reactor refueling, the accumulator would have to be discharged from an initial pressure of 600 psig. Discharging the accumulator from this pressure would stress the piping system and inject nitrogen into the RCS. *Nitrogen in the RCS has been linked to gas binding of the RHR pumps.
2-SI-107 2-SI-128 2-SI-145 category:
Alternate Testing Proposed To verify that these valves will stroke to the open position, they will be placed into two groups. Valves 2-SI-130 and 147 are in one group and.valves 2-SI-107, 109, 128 and 145 are in the other group. Because 2-SI-130 and 147 are downstream from where RHR connects to the SI line, they experience different service conditions than the other valves.
C Class 1
2-sI..:109 2-SI-130 2-SI-147 Function:
Accumulator Discharge Check Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.
Basis For Request These valves cannot be partial or full flow tested during normal operation because the accumulator pressure (600 t9 650 psig) is below Reactor Coolant System pressure and the injection of borated water would upset the reactor coolant chemistry.
During cold shutdown, the RCS pressure still prevents full flow testing.
To achieve full flow*through the valves during reactor refueling, the accumulator would have to be discharged from an initial pressure of 600 psig.
Discharging the accumulator from this pressure would stress the piping system and inject nitrogen into the RCS. *Nitrogen in the RCS has been linked to gas binding of the RHR pumps.
Alternate Testing Proposed To verify that these valves will stroke to the open position, they will be placed into two groups.
Valves 2-SI-130 and 147 are in one group and.valves 2-SI-107, 109, 128 and 145 are in the other group.
Because 2-SI-130 and 147 are downstream from where RHR connects to the SI line, they experience different service conditions than the other valves.
One valve from the group of four valves (2-SI-107, 109, 128 and 145) will be disassembled and inspected every refueling outage.
One valve from the group of four valves (2-SI-107, 109, 128 and 145) will be disassembled and inspected every refueling outage.
These valves will be partial flow tested every reactor refueling .
These valves will be partial flow tested every reactor refueling.
* S2PV-6R3 4-20 Rev. 3 April 15, 1992
4-20 S2PV-6R3 Rev. 3 April 15, 1992  
* RELIEF REQUEST V-26 (Cont.)
 
Partial flow can be established through valves 2-SI-130 and 147 using RHR pump flow since these valves are downstream of where the two RHR lines discharge into the cold leg safety injection lines. Testing experience has shown that the flow from both RHR pumps can drive the disk of valves 2-SI-130 and 147 to the back seat. This impact event will be recorded using acoustic monitoring instrumentation for both valves each reactor refueling. The data will be analyzed to show that the disk struck the back seat, thus verifying that the disk stroked to the full open position *
RELIEF REQUEST V-26 (Cont.)
*
Partial flow can be established through valves 2-SI-130 and 147 using RHR pump flow since these valves are downstream of where the two RHR lines discharge into the cold leg safety injection lines.
* S2PV-6R3 4-21 Rev. 3 April 15, 1992
Testing experience has shown that the flow from both RHR pumps can drive the disk of valves 2-SI-130 and 147 to the back seat.
* System Valve(s):
This impact event will be recorded using acoustic monitoring instrumentation for both valves each reactor refueling.
RELIEF REQUEST V-27 Safety Injection Valves affected by this request are identified in*
The data will be analyzed to show that the disk struck the back seat, thus verifying that the disk stroked to the full open position
* 4-21 S2PV-6R3 Rev. 3 April 15, 1992  
 
RELIEF REQUEST V-27 System Safety Injection Valve(s):
Valves affected by this request are identified in*
Category:
Class Functiqn:
Table G.
Table G.
* Category:
* Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.
Class Functiqn:
Basis For Request The valves on the high head injection lines cannot be partial or full stroke exercised during power operation because flow through these valves would thermal shock the injection system and.cause unnecessary plant transients. *Flow cannot be established in the low head injection lines during power operation.
Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.
During cold shutdown,*the Reactor coolant System pressure still prevents full design flow.
Basis For Request The valves on the high head injection lines cannot be partial or full stroke exercised during power operation because flow through these valves would thermal shock the injection system and .cause unnecessary plant transients. *Flow cannot be established in the
Also, a partial or full stroke test could cause an overpres~urization of the Reactor Coolant System and force a safety system to.function.
* low head injection lines during power operation. During cold shutdown,*the Reactor coolant System pressure still prevents full design flow. Also,     a partial or full stroke test could cause an overpres~urization of the Reactor Coolant System and force a safety system to .function.
To verify closure, valves 2-SI-79, 82, 85, 241, 242 and 243 must be vented *upstream and a leakage test performed.
To verify closure, valves 2-SI-79, 82, 85, 241, 242 and 243 must be vented *upstream and a leakage test performed. Per Technical Specification Table 4.1-2A, periodic leakage testing on each valve shall be accomplished prior to entering power operation condition after each time the plant is placed in the cold shutdown condition for refueling and after each time the plant is placed in cold shutdown condition for 72 hours *if testing has not been accomplished in the proceeding 9 months. No significant increase in safety will be realized by performing the leakage tests every cold shutdown.
Per Technical Specification Table 4.1-2A, periodic leakage testing on each valve shall be accomplished prior to entering power operation condition after each time the plant is placed in the cold shutdown condition for refueling and after each time the plant is placed in cold shutdown condition for 72 hours *if testing has not been accomplished in the proceeding 9 months.
Alternate Testing Proposed There is no installed instrumentation that can measure individual
No significant increase in safety will be realized by performing the leakage tests every cold shutdown.
  .flow rates for valves 2~SI-79, 82, 85, 88, 91, 94, 238, 239, 240, 241, 242 and 243. Full flow through the hot leg safety injection valves (2-SI-88, 91, 94, 238, 239 and 240) will be verified using clamp on ultrasonic flow instrumentation .
Alternate Testing Proposed There is no installed instrumentation that can measure individual  
* S2PV-6R3 4-22 Rev. 3 April 15, 1992
.flow rates for valves 2~SI-79, 82, 85, 88, 91, 94, 238, 239, 240, 241, 242 and 243.
* RELIEF REQUEST V-27 (Cont.)
Full flow through the hot leg safety injection valves (2-SI-88, 91, 94, 238, 239 and 240) will be verified using clamp on ultrasonic flow instrumentation.
Using low head pump flow, the cold leg injection valves (2-SI-79, 82, 85, 241, 242 and 243) will be acoustically monitored for the disk striking the back seat every reactor refueling. The data will be analyzed to show that the disk struck the back seat, 'thus verifying that the disk stroked to the full open position.
4-22 S2PV-6R3 Rev. 3 April 15, 1992  
 
RELIEF REQUEST V-27 (Cont.)
Using low head pump flow, the cold leg injection valves (2-SI-79, 82, 85, 241, 242 and 243) will be acoustically monitored for the disk striking the back seat every reactor refueling.
The data will be analyzed to show that the disk struck the back seat, 'thus verifying that the disk stroked to the full open position.
Valves 2-SI-224, 225, 226, 227, 228, 229, 235, 236 and 237 will be full stroke exercised with flow every reactor refueling.
Valves 2-SI-224, 225, 226, 227, 228, 229, 235, 236 and 237 will be full stroke exercised with flow every reactor refueling.
Valves 2-SI-79, 82, 85, 241, 242 and 243 will be tested to the closed position every reactor refueling per Technical Specification Table 4.1-2A.
Valves 2-SI-79, 82, 85, 241, 242 and 243 will be tested to the closed position every reactor refueling per Technical Specification Table 4.1-2A.
Valves 2-SI-88, 91, 94, 238, 239 and 240 are confirmed closed by monitoring leakage from the Reactor Coolant System per Technical Specifications 3.1.C and 4.3. Individual valve verification to the closed position is not possible with the current line configurations.
Valves 2-SI-88, 91, 94, 238, 239 and 240 are confirmed closed by monitoring leakage from the Reactor Coolant System per Technical Specifications 3.1.C and 4.3.
The remaining valves need only to open .
Individual valve verification to the closed position is not possible with the current line configurations.
* Valve 2-SI-88, 91 2-SI-94, 238 Category C
The remaining valves need only to open.
TABLE G Class 1
TABLE G Valve Category Class Function 2-SI-88, 91 C
Function Safety Injection to RCS Hot Legs 2-SI-239, 240 2-SI-235           C         1       High Head Safety Injection 2-SI-236                               to RCS Cold Legs 2-SI-237 2-SI-241           AC         1       Low Head Safety Injection 2-SI-242                               to RCS Cold Legs 2-SI-243 2-SI-224, 225       C         2       High Head Safety Injection 2-SI-226, 227                         Check Valve at Containment Penetrations 2-SI-228, 229       C         2       Low Head Safety Injection Check Valves at Containment Penetrations
1 Safety Injection to RCS 2-SI-94, 238 Hot Legs 2-SI-239, 240 2-SI-235 C
**
1 High Head Safety Injection 2-SI-236 to RCS Cold Legs 2-SI-237 2-SI-241 AC 1
2-SI-79, 82, 85     AC         i       Safety Injection to RCS Cold Legs 4.:.23 S2PV-6R3                                             Rev. 3 April 15, 1992
Low Head Safety Injection 2-SI-242 to RCS Cold Legs 2-SI-243 2-SI-224, 225 C
* system Valve(s):   2-SI-25 RELIEF REQUEST V-28 RWST Cross Tie 2-SI-400 Category:   C Class       2 Function:   Charging Pump Suction from RWST Cross Tie Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
2 High Head Safety Injection 2-SI-226, 227 Check Valve at Containment Penetrations 2-SI-228, 229 C
Basis For Relief Exerci$ing these valves during power operation would require the charging pump suctions to be aligned with the refueling water storage tank. This would cause a sudden increase in reactor coolant boron inventory .
2 Low Head Safety Injection Check Valves at Containment Penetrations 2-SI-79, 82, 85 AC i
* Full.flow for the charging system can only be established during reactor refueling when the RCS is depressurized.
Safety Injection to RCS Cold Legs 4.:.23 S2PV-6R3 Rev. 3 April 15, 1992  
Valve 2-SI-25 must close to preserve inventory from the Unit 1 RWST when *the cross tie lines are opened. There are no vents or pressure instrumentation upstream of the valve; therefore, the valve cannot be backseat tested with flow.
 
RELIEF REQUEST V-28 system RWST Cross Tie Valve(s):
2-SI-25 2-SI-400 Category:
C Class 2
Function:
Charging Pump Suction from RWST Cross Tie Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
Basis For Relief Exerci$ing these valves during power operation would require the charging pump suctions to be aligned with the refueling water storage tank.
This would cause a sudden increase in reactor coolant boron inventory.
Full.flow for the charging system can only be established during reactor refueling when the RCS is depressurized.
Valve 2-SI-25 must close to preserve inventory from the Unit 1 RWST when *the cross tie lines are opened.
There are no vents or pressure instrumentation upstream of the valve; therefore, the valve cannot be backseat tested with flow.
Alternate Testing Proposed These valves will partial flow tested during every cold shutdown and full flow tested during every reactor refueling.
Alternate Testing Proposed These valves will partial flow tested during every cold shutdown and full flow tested during every reactor refueling.
Valve 2-SI-25 will be disassembled and inspected every other
Valve 2-SI-25 will be disassembled and inspected every other  
  .refueling outage to verify valve closure. Per the guidelines of Generic Letter 89-04, this valve is the only one in the sample group and is therefore subject to disassembly every outage.
.refueling outage to verify valve closure.
However, disassembling this valve every outage represents excessive intrusive maintenance.* If inspection results indicate degradation, the disassembly interval will be increased t6 once every refueling outage .
Per the guidelines of Generic Letter 89-04, this valve is the only one in the sample group and is therefore subject to disassembly every outage.
* S2PV-6R3 4-24 Rev. 3 March 19, 1992
However, disassembling this valve every outage represents excessive intrusive maintenance.* If inspection results indicate degradation, the disassembly interval will be increased t6 once every refueling outage.
* RELIEF REQUEST V-29 Replaced by Cold Shutdown Justification CSV-21 RELIEF REQUEST V-30 Relief Request Withdrawn
4-24 S2PV-6R3 Rev. 3 March 19, 1992  
*
 
* S2PV-6R3 4-25 Rev. 3 March 19, 1992
RELIEF REQUEST V-29 Replaced by Cold Shutdown Justification CSV-21 RELIEF REQUEST V-30 Relief Request Withdrawn 4-25 S2PV-6R3 Rev. 3 March 19, 1992  
* System Valve(s):
 
RELIEF REQUEST V-31 Reactor Coolant 2-RC-SOV-200A-l
RELIEF REQUEST V-31 System Reactor Coolant Valve(s):
            *2-RC-SOV-200A-2 2-RC-SOV-200B-1 2-RC-SOV-200B-2 Category:   B Class       1 Function:   Head Vent for Reactor Vessel Section XI Code Requirements For Which Relief Is Requested Exercise valves and perform fail-safe testing_ every three months.
2-RC-SOV-200A-l  
Basis For Request These valves isolate the reactor vessel from containment
*2-RC-SOV-200A-2 2-RC-SOV-200B-1 2-RC-SOV-200B-2 Category:
* atmosphere. Partial or full stroke exercising the valves during normal operation or during cold shutdowns where the reactor coolant system is pressurized could result in the release of uncontrolled contamination to containment.
B Class 1
Alternate Testing Proposed Exercise for operability during cold shutdowns when the reactor coolant system is not pressurized (but not more frequently than once per three months) .
Function:
* S2PV-6R3 4-26 Rev. 3 March 19, 1992
Head Vent for Reactor Vessel Section XI Code Requirements For Which Relief Is Requested Exercise valves and perform fail-safe testing_ every three months.
* RELIEF REQUEST V-32 Replaced by Cold Shutdown Justification CSV-22 RELIEF REQUEST V-33 Relief Request Withdrawn
Basis For Request These valves isolate the reactor vessel from containment atmosphere.
*
Partial or full stroke exercising the valves during normal operation or during cold shutdowns where the reactor coolant system is pressurized could result in the release of uncontrolled contamination to containment.
* S2PV-6R3 4-27 Rev. 3 March 19, 1992
Alternate Testing Proposed Exercise for operability during cold shutdowns when the reactor coolant system is not pressurized (but not more frequently than once per three months).
* System Valve(s):
4-26 S2PV-6R3 Rev. 3 March 19, 1992  
Various RELIEF REQUEST V-34 Valves affected by this request are identified in
 
              *Table J.
RELIEF REQUEST V-32 Replaced by Cold Shutdown Justification CSV-22 RELIEF REQUEST V-33 Relief Request Withdrawn 4-27 S2PV-6R3 Rev. 3 March 19, 1992  
 
RELIEF REQUEST V-34 System Various Valve(s):
Valves affected by this request are identified in  
*Table J.
Category:
Category:
Class Function:
Class Function:
Section XI Code Requirement For Which Relief Is Requested Section XI, IWV-3417(a) "Corrective Action" Basis For Request These valves have a normal stroke time of 2 seconds or less; therefore, they could be considered rapid acting valves.
Section XI Code Requirement For Which Relief Is Requested Section XI, IWV-3417(a) "Corrective Action" Basis For Request These valves have a normal stroke time of 2 seconds or less; therefore, they could be considered rapid acting valves.
Alternate Testing Proposed
Alternate Testing Proposed Whenever. the stroke time of these valves exceeds 2 seconds, IWV-3417(b) will be applied.
* Whenever. the stroke time of these valves exceeds 2 seconds, IWV-3417(b) will be applied.
Note: The list of valves in Table J may change due to maintenance activities which affect valve performance.
Note: The list of valves in Table J may change due to maintenance activities which affect valve performance. An updated list of rapid acting valves will be maintained by ISI site personnel .
An updated list of rapid acting valves will be maintained by ISI site personnel.
* S2PV-6R3 4-28 Rev. 3 March 19, 1992
4-28 S2PV-6R3 Rev. 3 March 19, 1992  
* Valve RELIEF REQUEST V-34 (Cont.)
 
Category TABLE J Class  Function 2-MS-TV-210         B        2    Main steam Drain to Blowdown 2-CC-TV-207         B        3      Component Cooling from RCP 2-SS-TV-200.A,B     A        1    *Pressurizer Liquid Space Sample 2-SS-TV-201A,B     A        1      Pressurizer Vapor Space Sample 2-SS-TV-206A,B     A        1      Primary Coolant Hot Leg Sample 2-SS-TV-202A,B     A        1      Primary Coolant Cold Leg Sample 2-SS-TV-204A,B     A         2     Pressurizer Relief Tank Gas
RELIEF REQUEST V-34 (Cont.)
                                      -Space Sample 2-DA-TV-200A,B     A        2     Reactor Containment Sump Pump
TABLE J Valve 2-MS-TV-210 2-CC-TV-207 2-SS-TV-200.A,B 2-SS-TV-201A,B 2-SS-TV-206A,B 2-SS-TV-202A,B 2-SS-TV-204A,B 2-DA-TV-200A,B 2-DA-TV-203A,B Category B
* 2-DA-TV-203A,B 2-VG-TV-209A,B A
B A
A A
A A
A A
2-VG-TV-209A,B A
2-LM-TV-200A-H A
2~cv,;,_TV-250A-D A
2-RC-PCV-2456 BC 2-RC-PCV-2455C BC 2-RC-SOV-200A-1,-2 B
2-RC-SOV-200B-1,-2 S2PV-6R3 Class Function 2
3 1
1 1
1 2
2 2
2 2
2 1
1 1
Main steam Drain to Blowdown Component Cooling from RCP
*Pressurizer Liquid Space Sample Pressurizer Vapor Space Sample Primary Coolant Hot Leg Sample Primary Coolant Cold Leg Sample Pressurizer Relief Tank Gas
-Space Sample Reactor Containment Sump Pump Discharge Isolation Post Accident Sample Ret&#xb5;rn Line*
Gas Vent Header Isolation Leakage Monitoring System Isolation Containment Vacuum Pump Suction Isolation Pressurizer Power Operated Relief Valve Pressurizer Power Operated Relief Valve Reactor Vessel Head Vent 4-29 Rev. 3 March 19, *1992
 
Valve 2-CH-TV-2204B 2-GW-TV-200-207 2-GW-TV-211A,B 2-BD-TV-200A-F 2-RM-TV-200A,B,C 2-DG-TV-208B 2-IA-TV-200 2-IA-TV-201B 2-SI-TV-200 2-SI-TV-201B S2PV-6R3 RELIEF REQUEST V-34 (Cont.)
TABLE J Category A
A A
B A
A A
A A
A 2
A 2
2 Discharge Isolation Post Accident Sample Ret&#xb5;rn Line*
2 2
Gas Vent Header Isolation 2-LM-TV-200A-H      A        2     Leakage Monitoring System Isolation 2~cv,;,_TV-250A-D  A        2     Containment Vacuum Pump Suction Isolation 2-RC-PCV-2456      BC        1      Pressurizer Power Operated Relief Valve 2-RC-PCV-2455C      BC        1      Pressurizer Power Operated Relief Valve 2-RC-SOV-200A-1,-2  B        1    Reactor Vessel Head Vent 2-RC-SOV-200B-1,-2
2 2
* S2PV-6R3 4-29 Rev. 3 March 19, *1992
2 2
* Valve RELIEF REQUEST V-34 (Cont.)
2 2
Category TABLE J Class   Function 2-CH-TV-2204B    A        2    RCS Letdown Isolation Trip Valves 2-GW-TV-200-207  A        2    Suction/Discharge Line to Hydrogen Analyzer 2-GW-TV-211A,B    A        2    Containment Grab Sample 2-BD-TV-200A-F    B        2    Steam Generator Blowdown Isolation 2-RM-TV-200A,B,C  A        2    Isolation on Monitor Return Line 2-DG-TV-208B      A        2    Primary Drain Transfer Pump Discharge Isolation 2-IA-TV-200      A        2    Instrument Air Supply to
2 Class Function RCS Letdown Isolation Trip Valves Suction/Discharge Line to Hydrogen Analyzer Containment Grab Sample Steam Generator Blowdown Isolation Isolation on Monitor Return Line Primary Drain Transfer Pump Discharge Isolation Instrument Air Supply to Containment Isolation Instrument Air Suction from Containment Isolation Nitrogen Supply to Accumulators Containment Isolation Accumulators to Waste Gas Charcoal Filters Containment Isolation 4-30 Rev. 3 March 19, 1992  
* Containment Isolation 2-IA-TV-201B      A        2    Instrument Air Suction from Containment Isolation 2-SI-TV-200      A        2    Nitrogen Supply to Accumulators Containment Isolation 2-SI-TV-201B      A        2    Accumulators to Waste Gas Charcoal Filters Containment Isolation
 
* S2PV-6R3 4-30 Rev. 3 March 19, 1992
RELIEF REQUEST V-35 Replaced by Cold Shutdown Justification CVS-7 4-31 S2PV-6R3 Rev. 3 March 19, 1992  
* RELIEF REQUEST V-35 Replaced by Cold Shutdown Justification CVS-7
 
*
System EE Valve (s) :.
* S2PV-6R3 4-31 Rev. 3 March 19, 1992
1-EE-SOV-102 1-EE-SOV-103 1-EE..;.SOV-104 Category:
* System   :
B Class NC RELIEF REQUEST V-36 Function:
Valve (s) :.
Diesel Fuel Oil Pump Discharge Valves Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
EE 1-EE-SOV-102 RELIEF REQUEST V-36 1-EE-SOV-103 1-EE..;.SOV-104 Category:   B Class       NC Function:   Diesel Fuel Oil Pump Discharge Valves Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
Basis For Request These valves are small {l"), fast acting solenoid operated gate
Basis For Request These valves are small {l"), fast acting solenoid operated gate
* valves with no position indication lights and no iocal visual means of determining stroke time. Valve operability can only be
* valves with no position indication lights and no iocal visual means of determining stroke time.
* indirectly observed by verifying system operability .
Valve operability can only be indirectly observed by verifying system operability.
Also, these valves are interlocked with the pumps to open and close upon pump startup and shutdown.
Also, these valves are interlocked with the pumps to open and close upon pump startup and shutdown.
Alternate Testing Proposed These solenoid   valves will be stroke tested quarterly by observing that   the solenoid valves perform their intended function (fuel   oil is flowing to the day tank after the solenoid valve has been   opened) .
Alternate Testing Proposed These solenoid valves will be stroke tested quarterly by observing that the solenoid valves perform their intended function (fuel oil is flowing to the day tank after the solenoid valve has been opened).
* S2PV-6R3 4-32 Rev. 3 March 19, 1992
4-32 S2PV-6R3 Rev. 3 March 19, 1992  
* RELIEF REQUEST V-37 system     EG Valve(s)   2-EG-S0V-200A 2-EG-SOV-200B Category   B Class       NC Function: Diesel Air Start System Solenoid Valves Section XI Code Requirement For Which Relief Is Requested Section XI, IWV-3413 "Power Operated Valves" Basis For Request These valves have actuation times considerably under a second and there is no visual reference on the solenoid valve when it has stroked; therefore, the stroke time cannot be measured.
 
* Alternate Testing Proposed These solenoid valves will be stroke tested quarterly by observing that the solenoid valves perform their intended function, which is to start the diesel engines. Adequate performance of the valves will be verified by reco~ding the time it takes for the diesel engines to reach a predetermined RPM and comparing.the time to an acceptance criterion.
RELIEF REQUEST V-37 system EG Valve(s) 2-EG-S0V-200A 2-EG-SOV-200B Category B
Also, the failure of these valves to open or close will promptly give a diesel engine trouble alarm. Further investigation would identify problems with the operability of these valves .
Class NC Function:
* S2PV-6R3 4-33 Rev. 3 March 19, 1992
Diesel Air Start System Solenoid Valves Section XI Code Requirement For Which Relief Is Requested Section XI, IWV-3413 "Power Operated Valves" Basis For Request These valves have actuation times considerably under a second and there is no visual reference on the solenoid valve when it has stroked; therefore, the stroke time cannot be measured.
* RELIEF REQUEST V-38 Relief Request Withdrawn
Alternate Testing Proposed These solenoid valves will be stroke tested quarterly by observing that the solenoid valves perform their intended function, which is to start the diesel engines.
*
Adequate performance of the valves will be verified by reco~ding the time it takes for the diesel engines to reach a predetermined RPM and comparing.the time to an acceptance criterion.
* S2PV-6R3 4-34 Rev. 3 March 19, 1992
Also, the failure of these valves to open or close will promptly give a diesel engine trouble alarm.
Further investigation would identify problems with the operability of these valves.
4-33 S2PV-6R3 Rev. 3 March 19, 1992  
 
RELIEF REQUEST V-38 Relief Request Withdrawn 4-34 S2PV-6R3 Rev. 3 March 19, 1992  


~                       RELIEF REQUEST V-39 System     Various Valve(s): Valves affected by this request are identified by Table K Category:
~
RELIEF REQUEST V-39 System Various Valve(s):
Valves affected by this request are identified by Table K Category:
Class Function:
Class Function:
Section XI Code Requirement For Which Relief Is Requested Leakage rate measurements shall be compared with the permissible leakag~ rates specified by the plant owner for~ specific valve.
Section XI Code Requirement For Which Relief Is Requested Leakage rate measurements shall be compared with the permissible leakag~ rates specified by the plant owner for~ specific valve.
Basis For Request The piping configurations for some containment penetrations do not allow for the individual leakage testing of the containment isolation valves which isolate the penetrations.
Basis For Request The piping configurations for some containment penetrations do not allow for the individual leakage testing of the containment isolation valves which isolate the penetrations.
* Alternate Testing Proposed In cases where containment isolation valves cannot be individually leakage tested, the containment isolation valves are grouped based on the configuration restraints and the groups are assigned permissible leakages. The valve groups are subject to the acceptance criteria described in IWV-3426 and 3427 .
Alternate Testing Proposed In cases where containment isolation valves cannot be individually leakage tested, the containment isolation valves are grouped based on the configuration restraints and the groups are assigned permissible leakages.
* S2PV-6R3 4-35 Rev. 3 March 19, 1992
The valve groups are subject to the acceptance criteria described in IWV-3426 and 3427.
4-35 S2PV-6R3 Rev. 3 March 19, 1992
 
i Valve 2-SI-150 2-SI-MOV-2867C 2-SI-MOV-2867D.
2-SI-174 2-SI-MOV-2869A 2-SI-MOV-2860A 2-SI-MOV-2860B 2-SI-321, 322 2-IA-TV-200 2-IA-704 2-LM-TV-200A 2-LM-TV-200C 2-LM-TV-200E 2-LM-TV-200G 2--LM-TV-200B 2-LM-TV-200D 2-LM-TV-200F 2-LM-TV-200H 2-CS-MOV-201A 2-CS-MOV-201B 2-CS-MOV-201C 2-CS-MOV-201D 2-RS-MOV-255A 2-RS-MOV-255B 2-RS-46, 53 2-VS-MOV-200C 2-VS-MOV-200D 2-VS-MOV-201 S2PV-6R3 RELIEF REQUEST V-39 (Cont.)
Table K Category AE A
A AE A
.A AE A
AE A
A A
A A
AE AE Class Function 2
Boron Injection Tank Isolation 2
High Head Safety Injection to Reactor Coolant System 2
2 2
2 2
2 2
2 4-36 Low Head Safety Injection Pump Suction from Containment sump Instrument Air Discharge to Containment
.Leakage Monitoring System Isolation Leakage Monitoring System Isolation Containment Spray Pump Discharge Containment Spray Pump Discharge**
Recirculation Spray Pump Suction from Containment Sump Containment Purge Exhaust Isolation Rev. 3 March 19, 1992
 
RELIEF REQUEST V-39 (Cont.)
TABLE K Valve Category Class Function 2-VS-MOV-200A AE 2
Containment Purge Supply 2-VS-MOV-200B Isolation 2-VS-MOV-202 2-RL-3 AE 2
Reactor Cavity 2-RL-5 Purification Return Line 4-37 S2PV-6R3 Rev. 3 March 19, 1992
___J


i
RELIEF REQUEST V-40 Relief Request Withdrawn 4-38 S2PV-6R3 Rev. 3 March 19, 1992  
* Valve RELIEF REQUEST V-39 (Cont.)
 
Category Table K Class  Function 2-SI-150        AE        2      Boron Injection Tank 2-SI-MOV-2867C  A                  Isolation 2-SI-MOV-2867D. A 2-SI-174        AE        2      High Head Safety Injection 2-SI-MOV-2869A  A                  to Reactor Coolant System 2-SI-MOV-2860A  .A          2      Low Head Safety Injection 2-SI-MOV-2860B                      Pump Suction from 2-SI-321, 322    AE                Containment sump 2-IA-TV-200      A          2      Instrument Air Discharge 2-IA-704        AE                to Containment 2-LM-TV-200A    A          2      .Leakage Monitoring System 2-LM-TV-200C                        Isolation 2-LM-TV-200E 2-LM-TV-200G
System Valve(s)
* 2--LM-TV-200B 2-LM-TV-200D 2-LM-TV-200F 2-LM-TV-200H A          2      Leakage Monitoring System Isolation 2-CS-MOV-201A    A          2      Containment Spray Pump 2-CS-MOV-201B                      Discharge 2-CS-MOV-201C    A          2      Containment Spray Pump 2-CS-MOV-201D                      Discharge**
FW 2-FW-144 2-FW-148 Category C
2-RS-MOV-255A    A          2      Recirculation Spray Pump 2-RS-MOV-255B                      Suction from Containment 2-RS-46, 53      AE                Sump 2-VS-MOV-200C    AE        2      Containment Purge Exhaust 2-VS-MOV-200D                      Isolation 2-VS-MOV-201
Class 3
** S2PV-6R3 4-36 Rev. 3 March 19, 1992
RELIEF REQUEST V-41 2-FW-159 2-FW-163 2-FW-174 2-FW-178 Function Auxiliary Feedwater Pump Recirc Line and Pump Oil Cooler Check Valves Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
* Valve RELIEF REQUEST V-39 (Cont.)
Basis For Relief These check valves cannot be partial or full flow tested because instrumentation is not installed to measure flow or differential pressure.
Category TABLE K Class  Function 2-VS-MOV-200A  AE        2      Containment Purge Supply 2-VS-MOV-200B                    Isolation 2-VS-MOV-202 2-RL-3        AE        2      Reactor Cavity 2-RL-5                          Purification Return Line
There is no other indirect means to verify full flow for these valves with the current configuration.
*
Alternate Testing Proposed Valves 2-FW-144, 159, and 174 will be grouped together; valves 2-FW-148, 163, and 178 will be grouped-together and one valve from each group will be disassembled and inspected every reactor refueling:
* S2PV-6R3 4-37 Rev. 3 March 19, 1992
A different valve from each group will be disassembled every reactor refueling.
___J
These valves will be part stroke exercised every three months.
* RELIEF REQUEST V-40 Relief Request Withdrawn
4-39 S2PV-6R3 Rev. 3 March 19, 1992  
*
 
* S2PV-6R3 4-38 Rev. 3 March 19, 1992
System MS Valve(s) :
* System Valve(s)
2-MS-176 2-MS-178 2-MS-182 Category C
FW 2-FW-144 RELIEF REQUEST V-41 2-FW-159   2-FW-174 2-FW-148  2-FW-163  2-FW-178 Category    C Class    :  3 Function   Auxiliary Feedwater Pump Recirc Line and Pump Oil Cooler Check Valves Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
Class 2
Basis For Relief These check valves cannot be partial or full flow tested because instrumentation is not installed to measure flow or differential pressure. There is no other indirect means to verify full flow
RELIEF REQUEST V-42 Function Main steam Header Supply Check Valves To Turbine Driven Auxiliary Feedwater Pump Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability to the closed position every three months.
* for these valves with the current configuration .
Basis For Relief These check valves cannot be exercised to the closed position during normal operation because this test would require the venting of process steam while verifying the closed position.
Alternate Testing Proposed Valves 2-FW-144, 159, and 174 will be grouped together; valves 2-FW-148, 163, and 178 will be grouped-together and one valve from each group will be disassembled and inspected every reactor refueling: A different valve from each group will be disassembled every reactor refueling. These valves will be part stroke exercised every three months .
* S2PV-6R3 4-39 Rev. 3 March 19, 1992
* System Valve(s)
:
:
MS 2-MS-176 RELIEF REQUEST V-42 2-MS-178 2-MS-182 Category   C Class       2 Function   Main steam Header Supply Check Valves To Turbine Driven Auxiliary Feedwater Pump Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability to the closed position every three months.
Basis For Relief These check valves cannot be exercised to the closed position
* during normal operation because this test would require the venting of process steam while verifying the closed position.
Venting of process steam would endanger the test personnel.
Venting of process steam would endanger the test personnel.
Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling~
Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling~
A different valve will be disassembled every reactor refueling.
A different valve will be disassembled every reactor refueling.
The valves will be full flow tested every three months .
The valves will be full flow tested every three months.
* S2PV-6R3 4-40 Rev. 3 March 19, 1992
4-40 S2PV-6R3 Rev. 3 March 19, 1992  
* system Valve(s):
 
cs 2-cs-104 RELIEF REQUEST V-43 2-cs~13   2-Rs-11 2-CS-105 2-CS-24 2-RS-17 Category: AC (2-CS-13,24 and 2-RS-11,17) and C (2-CS-104,105)
RELIEF REQUEST V-43 system cs Valve(s):
Class       2 Function: Containment Spray Pump Discharge Check Valves Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
2-cs-104 2-cs~13 2-Rs-11 2-CS-105 2-CS-24 2-RS-17 Category:
Basis For Relief These check valves cannot be partial or full *flow exercised during normal operation because this test would introduce containment spray to containment. These valves cannot be locally exercised during normal operation because they are located inside
AC (2-CS-13,24 and 2-RS-11,17) and C (2-CS-104,105)
* containment .
Class 2
These valves are located upstream of the spray nozzles. Fo.r valves 2-CS-13 and 24, and 2-RS-11 and 17, the only way to perform a test (partial open or closed) is to install a blank flange downstream and local!~ perform an partial open and close test using air. The small increase in safety gained by performing this test every cold shutdown does not justify the burden of installing the blank flange and locally back seat     ,
Function:
testing the valves at the increased cold shutdown test frequency.
Containment Spray Pump Discharge Check Valves Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.
There are no blank flanges installed downstream for valves 2-CS-104 and 105. .Therefore, a back seat test or a partial open test cannot be performed on these valves with the current piping configuration. These valves have no external lever arms. The only means to exercise valves 2~CS-104 and 105 to the open and closed positions is by di~assembly.
Basis For Relief These check valves cannot be partial or full *flow exercised during normal operation because this test would introduce containment spray to containment.
Valves 2-CS-13 and 24, and 2-RS-11 and 17 do have weight-loaded lever arms, however, the weight position and lever arm angle are subject to adjustment to ensure that the valves open when a pressure differential using air is applie~ every 1S months as required by T. s. 4.5.C. Therefore, torque measurements would not be repeatable .
These valves cannot be locally exercised during normal operation because they are located inside containment.
* S2PV-6R3 4-41 Rev. 3 March 19, .1992
These valves are located upstream of the spray nozzles.
                                                                      . I I
Fo.r valves 2-CS-13 and 24, and 2-RS-11 and 17, the only way to perform a test (partial open or closed) is to install a blank flange downstream and local!~ perform an partial open and close test using air.
* RELIEF REQUEST V-43 (Cont.)
The small increase in safety gained by performing this test every cold shutdown does not justify the burden of installing the blank flange and locally back seat testing the valves at the increased cold shutdown test frequency.
Alternate Testing Proposed For testing to the open and closed positions, valves 2-CS-104 and 105 will be grouped together and one valve from the group will be disassembled and inspected every reactor refueling. A different valve will be disassembled every reactor refueling. A partial open test cannot be performed on valves 2-CS-104 and 105 with the current piping configuration.
There are no blank flanges installed downstream for valves 2-CS-104 and 105.  
.Therefore, a back seat test or a partial open test cannot be performed on these valves with the current piping configuration.
These valves have no external lever arms.
The only means to exercise valves 2~CS-104 and 105 to the open and closed positions is by di~assembly.
Valves 2-CS-13 and 24, and 2-RS-11 and 17 do have weight-loaded lever arms, however, the weight position and lever arm angle are subject to adjustment to ensure that the valves open when a pressure differential using air is applie~ every 1S months as required by T. s. 4.5.C.
Therefore, torque measurements would not be repeatable.
4-41 S2PV-6R3 Rev. 3 March 19,.1992  
 
RELIEF REQUEST V-43 (Cont.)
Alternate Testing Proposed For testing to the open and closed positions, valves 2-CS-104 and 105 will be grouped together and one valve from the group will be disassembled and inspected every reactor refueling.
A different valve will be disassembled every reactor refueling.
A partial open test cannot be performed on valves 2-CS-104 and 105 with the current piping configuration.
For testing to-the full open position; valves 2-CS-13 and 24 will be grouped together; and valves 2-RS-11 and 17 will be grouped_
For testing to-the full open position; valves 2-CS-13 and 24 will be grouped together; and valves 2-RS-11 and 17 will be grouped_
together and one valve from each group will be disassembled and inspected every reactor refueling. A different valve from each group will be disassembled every reactor refueling.
together and one valve from each group will be disassembled and inspected every reactor refueling.
Technical Specifications Paragraph 4.5.C. requires verification that valves 2-CS-13 and 24, and 2-RS-11 and 17 open when the discharge line of the pump is pressurized with air and seat when a vacuum is applied. This test partially strokes the valves open . .Valves 2-CS-13 and 24, and 2-RS-11 and 17 are containment isolation valves and are tested to the closed position each refueling outage as part of the Appendix J leak testing program .
A different valve from each group will be disassembled every reactor refueling.
*
Technical Specifications Paragraph 4.5.C. requires verification that valves 2-CS-13 and 24, and 2-RS-11 and 17 open when the discharge line of the pump is pressurized with air and seat when a vacuum is applied.
* S2PV-6R3 4-42 Rev. 3 March 19, 1992
This test partially strokes the valves open..
* System Valve(s):
Valves 2-CS-13 and 24, and 2-RS-11 and 17 are containment isolation valves and are tested to the closed position each refueling outage as part of the Appendix J leak testing program.
Various RELIEF REQUEST V-44 Valves affected by this justification are identified by Table L.
4-42 S2PV-6R3 Rev. 3 March 19, 1992  
Category:
 
RELIEF REQUEST V-44 System Various Valve(s):
Valves affected by this justification are identified Category:
Class Function:
Class Function:
by Table L.
Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability to the closed position every three months.
Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability to the closed position every three months.
Basis For Relief These check valves must seat upon reversal of flow in order to fulfill their safety functions. The only way to verify closure is to perform a local leak rate/back pressure test. Since the
Basis For Relief These check valves must seat upon reversal of flow in order to fulfill their safety functions.
* valves are located inside containment, they cannot be tested quarterly.
The only way to verify closure is to perform a local leak rate/back pressure test.
These valves are containment isolation valves and are subject to leak testing every reactor refueling outage per the requirements of the Appendix J leak testing program and Section XI IWV-3426 and 3427. The leak tests not only.verify that the valves close adequately as does a normal back pressure test, but the tests also reveal the condition of the valve seating surfaces. As required by IWV-3426 and IWV-3427, the leak tests include acceptance criteria for the maximum allowed leakage.
Since the valves are located inside containment, they cannot be tested quarterly.
These valves are containment isolation valves and are subject to leak testing every reactor refueling outage per the requirements of the Appendix J leak testing program and Section XI IWV-3426 and 3427.
The leak tests not only.verify that the valves close adequately as does a normal back pressure test, but the tests also reveal the condition of the valve seating surfaces.
As required by IWV-3426 and IWV-3427, the leak tests include acceptance criteria for the maximum allowed leakage.
Performing a back seat test every cold shutdown does not provide enough increase in safety to justify the burden of back seat testing on a more frequent basis.
Performing a back seat test every cold shutdown does not provide enough increase in safety to justify the burden of back seat testing on a more frequent basis.
Alternate Testing Proposed Exercise to the closed position every reactor refueling .
Alternate Testing Proposed Exercise to the closed position every reactor refueling.
* S2PV-6R3 4-43 Rev. 3 March 19, 1992
4-43 S2PV-6R3 Rev. 3 March 19, 1992  
* Valve RELIEF REQUEST V-44 (Cont.)
 
Category TABLE L Class Function 2-IA-864  AC        2      Instrument Air Containment 2-IA-868                    Isolation 2-RC-160  AC        2      Primary Grade Water to Pressurizer Relief Tank 2-RM-3    AC        2      Isolation on Monitor Return Line 2-SI-304  AC        2      Nitrogen Accumulators N2 Supply 2-VP-12  AC*        2      Condenser Air Removal Discharge to Containment
Valve 2-IA-864 2-IA-868 2-RC-160 2-RM-3 2-SI-304 2-VP-12 S2PV-6R3 RELIEF REQUEST V-44 (Cont.)
*
TABLE L Category AC AC AC AC AC*
** S2PV-6R3 4-44 Rev. 3 March 19, 1992
Class Function 2
* system Valve(s): 2-CC-94 RELIEF REQUEST V-45 Component Cooling 2-CC-555 2-CC-95        2-CC-556 2-CC-592      2-CC-55_7 Category: c Class     3 Function: Component Cooling Supply to RCP Thermal Barrier Isolation Section XI Code Requirement_
Instrument Air Containment Isolation 2
Primary Grade Water to Pressurizer Relief Tank 2
Isolation on Monitor Return Line 2
Nitrogen Accumulators N2 Supply 2
Condenser Air Removal Discharge to Containment 4-44 Rev. 3 March 19, 1992  
 
RELIEF REQUEST V-45 system Component Cooling Valve(s):
2-CC-94 2-CC-555 2-CC-556 2-CC-55_7 2-CC-95 2-CC-592 Category:
c Class 3
Function:
Component Cooling Supply to RCP Thermal Barrier Isolation Section XI Code Requirement_
For Which Relief Is Requested Exercise valves for operability to the closed position every three months.
For Which Relief Is Requested Exercise valves for operability to the closed position every three months.
Basis For Relief These check valves must seat upon reversal of flow in order to
Basis For Relief These check valves must seat upon reversal of flow in order to fulfill their safety function to prevent gross-leakage.
* fulfill their safety function to prevent gross-leakage. For the following reasons, it is not practical to test the thermal barrier check valves quarterly or at cold shutdown:
For the following reasons, it is not practical to test the thermal barrier check valves quarterly or at cold shutdown:
1.) the valves are inside a locked radiation area located inside containmeDt; therefore, they are not accessible during normal operation, 2.) the valves are inaccessible for about 24 hours after cold shutdown ~ue to deconta~ination activities which must be performed before entry intd the are~,
1.)
3.) the reactor cooling pump(s) may be running with the reactor cooling system temperature less than 200 OF if an RHR loop is unavailable (in this case the valves and thus cooling to the thermal barriers would normally not be isolated) and 4.) the valves have soft seats that are replaced every five years and using pressure to back seat these valves on the more frequent cold shutdown frequency may accelerate the degradation of the soft seats.
the valves are inside a locked radiation area located inside containmeDt; therefore, they are not accessible during normal operation, 2.)
These valves will be exercised only during refueling outages because the small increase in safety gained by performing this
the valves are inaccessible for about 24 hours after cold shutdown ~ue to deconta~ination activities which must be performed before entry intd the are~,
* test every cold shutdown does not justify the burden of performing a local back pressure test.
3.)
4-45 S2PV-6R3                                           Rev. 3 March 19, 1992
4.)
* RELIEF REQUEST V-45 (Cont.)
the reactor cooling pump(s) may be running with the reactor cooling system temperature less than 200 OF if an RHR loop is unavailable (in this case the valves and thus cooling to the thermal barriers would normally not be isolated) and the valves have soft seats that are replaced every five years and using pressure to back seat these valves on the more frequent cold shutdown frequency may accelerate the degradation of the soft seats.
Alternate Testing Proposed Exercise to the closed position every reactor refueling *
These valves will be exercised only during refueling outages because the small increase in safety gained by performing this test every cold shutdown does not justify the burden of performing a local back pressure test.
*
4-45 S2PV-6R3 Rev. 3 March 19, 1992  
* S2PV-6R3 4-46 Rev. 3.
 
March 19, 1992
RELIEF REQUEST V-45 (Cont.)
* system Valve(s):   2-SW-247
Alternate Testing Proposed Exercise to the closed position every reactor refueling
                          .RELIEF REQUEST V-46 Service Water 2-SW-251 2-SW-249      2-SW-253 category:  C Class    :  3 Function:   Recirculation Spray Heat Exchanger Service water Supply Vent Valves Section XI Code Requirement For Which Relief Is Reguested Exercise valves for operability to the open position every three months.
* 4-46 S2PV-6R3 Rev. 3.
Basis For Relief These check valves must open to provide an effective vent path to
March 19, 1992  
* ensure that the service water headers are filled and flow through
 
  .the recirculation spray heat exchangers is quickly.established .
.RELIEF REQUEST V-46 system Service Water Valve(s):
2-SW-247 2-SW-249 category:
C Class 3
2-SW-251 2-SW-253 Function:
Recirculation Spray Heat Exchanger Service water Supply Vent Valves Section XI Code Requirement For Which Relief Is Reguested Exercise valves for operability to the open position every three months.
Basis For Relief These check valves must open to provide an effective vent path to ensure that the service water headers are filled and flow through  
.the recirculation spray heat exchangers is quickly.established.
There is no instrumentation to measure flow or differentail.
There is no instrumentation to measure flow or differentail.
pressure across the valves. The valves are inaccessible and cannot be manually manipulated without disassembly. The valves can .be partial stroked open only when service water is sent through t~e recirculation spray heat exchangers. The recirculation spray heat exchangers are maintained dry to avoid fouling. With*the current piping configuration, there is no means to partial stroke test these valves without fouling the heat exchangers.
pressure across the valves.
The valves are inaccessible and cannot be manually manipulated without disassembly.
The valves can.be partial stroked open only when service water is sent through t~e recirculation spray heat exchangers.
The recirculation spray heat exchangers are maintained dry to avoid fouling.
With*the current piping configuration, there is no means to partial stroke test these valves without fouling the heat exchangers.
Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling.
Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling.
A different valve will be disassembled every reactor refueling .
A different valve will be disassembled every reactor refueling.
* S2PV-6R3 4-47 Rev. 3 March 19, 1992
4-47 S2PV-6R3 Rev. 3 March 19, 1992  
* System Valve(s):
 
Various RELIEF REQUEST V-47 Valves affected by this relief request are identified by Table M.
RELIEF REQUEST V-47 System Various Valve(s):
Category:
Valves affected by this relief request are identified Category:
Class Function:
Class Function:
by Table M.
Section XI Code Requirement For Which Relief Is Requested IWV-3417(a) - If, for power operated valves, an increase in stroke time of 25% or more from the previous test for valves with full stroke time greater than 10 sec or 50% or more for valves with full stroke time less than or equal to 10 sec is observed, test frequency shall be increased to once each month until corrective action is taken.
Section XI Code Requirement For Which Relief Is Requested IWV-3417(a) - If, for power operated valves, an increase in stroke time of 25% or more from the previous test for valves with full stroke time greater than 10 sec or 50% or more for valves with full stroke time less than or equal to 10 sec is observed, test frequency shall be increased to once each month until corrective action is taken.
Basis For Relief
Basis For Relief The valves listed in Table M typically exhibit stroke time data scatter from test to test that exceeds the 25% and 50% required by IWV-3417(a).
* The valves listed in Table M typically exhibit stroke time data scatter from test to test that exceeds the 25% and 50% required by IWV-3417(a). These valves .either have no remote indication and/or no remote control, or no remote open/close control, or the test requires that the power source be interrupted at the valve and not at the switch. Therefore, applying the r~quirements of IWV-3417(a) in these cases is not practical~
These valves.either have no remote indication and/or no remote control, or no remote open/close control, or the test requires that the power source be interrupted at the valve and not at the switch.
Therefore, applying the r~quirements of IWV-3417(a) in these cases is not practical~
Valve 2-CC-LCV-201 maintains the water level in the seal cooling water tank for component cooling to charging pump cooling system.
Valve 2-CC-LCV-201 maintains the water level in the seal cooling water tank for component cooling to charging pump cooling system.
Because this valve is being added to the IST Program, there is currently no stroke time data. However, this valve has no.remote indication or manual position switch. The valve can be exercised by manipulating the tank level signal and timed by locally observing stem movement. Differences in interpreting when the valve stem starts and stops will affect the repeatability of the stroke time measurements.
Because this valve is being added to the IST Program, there is currently no stroke time data.
The position of valves 2-MS-RV-201A, Band c is controlled by a potentiometer. Although the valves have remote position _
However, this valve has no.remote indication or manual position switch.
indication, there is no open/closed switch. The speed at which the valve goes open or closed depends upon the speed at which the operator turns the potentiom~ter knob, which in turn affects the repeatability of the stroke time measurements .
The valve can be exercised by manipulating the tank level signal and timed by locally observing stem movement.
* S2PV-6R3 4-48 Rev. 3 March 19, 1992
Differences in interpreting when the valve stem starts and stops will affect the repeatability of the stroke time measurements.
* RELIEF REQUEST v~47 (Cont.)
The position of valves 2-MS-RV-201A, Band c is controlled by a potentiometer.
Although the valves have remote position _
indication, there is no open/closed switch.
The speed at which the valve goes open or closed depends upon the speed at which the operator turns the potentiom~ter knob, which in turn affects the repeatability of the stroke time measurements.
4-48 S2PV-6R3 Rev. 3 March 19, 1992  
 
RELIEF REQUEST v~47 (Cont.)
Valves 2-RH-FCV-2605 and 2-RH-HCV-2758 have no remote indication.
Valves 2-RH-FCV-2605 and 2-RH-HCV-2758 have no remote indication.
The stroke time is measured by locally.observing stem movement.
The stroke time is measured by locally.observing stem movement.
Differences in interpreting when the valve stem starts and stops affect the repeatability of the stroke time measurements.
Differences in interpreting when the valve stem starts and stops affect the repeatability of the stroke time measurements.
Valves 2-SW-TCV-208A, Band C control the flow of service water to the charging pump lube oil coolers. Because these valves are being added to the IST Program, there is currently no stroke time data. However, there is no remote indication or manual position switch. Valve position is controlled by lube oil temperature.
Valves 2-SW-TCV-208A, Band C control the flow of service water to the charging pump lube oil coolers.
The valves can be locally manipulated and timed by observing stem movement. Differences in interpreting when the valve stem starts and stops will affect the repeatabiiity of the stroke time measurements.
Because these valves are being added to the IST Program, there is currently no stroke time data.
Alternate Testing Proposed Maximum .stroke times will be established in accordance with IWV-3417(b). However, the ranges described in IWV-3417(a) will not be applied .
However, there is no remote indication or manual position switch.
*
Valve position is controlled by lube oil temperature.
* S2PV-6R3 4-49 Rev. 3 March 19, 1992
The valves can be locally manipulated and timed by observing stem movement.
* Valve RELIEF REQUEST V-47 (Cont.)
Differences in interpreting when the valve stem starts and stops will affect the repeatabiiity of the stroke time measurements.
Category TABLE M Class   Function 2-CC-LCV-201      *B         3       Charging Pump Seal Cooling Surge Tank Level Control
Alternate Testing Proposed Maximum.stroke times will be established in accordance with IWV-3417(b).
  .2-MS-RV-201A, B, C  B          2       Main steam Header Discharge to Atmosphere PORV 2-RH-FCV-2605      B         2       RHR Heat Exchanger Bypass Flow Control Valve 2-RH-HCV-2758      B         2     .RHR Heat Exchanger Discharge Flow Control Valve 2-SW-TCV-208A,B,C  B          3       Service Water to Charging Pump Lube Oil Cooler Temperatur~ Control Valves
However, the ranges described in IWV-3417(a) will not be applied.
*
4-49 S2PV-6R3 Rev. 3 March 19, 1992  
* S2PV-6R3 4-50 Rev'. 3 March 19, 1992
 
* INTERIM RELIEF REQUEST V-48 System     Main* Steam Valve_(s): 2-MS-NRV-201A 2-MS-NRV-201B 2-MS-NRV-201C Category:   C Class       2 Function:   Main Steam Non-Return Valves Section XI Code Requirement For Which Interim Relief Is Requested Exercise valve for operability to the closed position every three months.
Valve 2-CC-LCV-201
Basis For Interim Relief These stop check valves ara currently verified closed by driving the stem down onto the disk using the motor ope~ator after the
.2-MS-RV-201A, B, C 2-RH-FCV-2605 2-RH-HCV-2758 2-SW-TCV-208A,B,C S2PV-6R3 RELIEF REQUEST V-47 (Cont.)
* main steam system has been isolated during plant shutdown. Full stroke or part stroke exercising of these valves during power
TABLE M Category Class Function  
*B 3
Charging Pump Seal Cooling Surge Tank Level Control B
2 Main steam Header Discharge to Atmosphere PORV B
2 RHR Heat Exchanger Bypass Flow Control Valve B
2  
.RHR Heat Exchanger Discharge Flow Control Valve B
3 Service Water to Charging Pump Lube Oil Cooler Temperatur~ Control Valves 4-50 Rev'. 3 March 19, 1992  
 
INTERIM RELIEF REQUEST V-48 System Main* Steam Valve_(s):
2-MS-NRV-201A 2-MS-NRV-201B 2-MS-NRV-201C Category:
C Class 2
Function:
Main Steam Non-Return Valves Section XI Code Requirement For Which Interim Relief Is Requested Exercise valve for operability to the closed position every three months.
Basis For Interim Relief These stop check valves ara currently verified closed by driving the stem down onto the disk using the motor ope~ator after the main steam system has been isolated during plant shutdown.
Full stroke or part stroke exercising of these valves during power
* operation could result in a turbine and reactor trip.
* operation could result in a turbine and reactor trip.
Closure testing of stop check valves was initially addressed in response to Question 25 in the original meeting minutes to Generic Letter 89-04. The question and response are as follows:
Closure testing of stop check valves was initially addressed in response to Question 25 in the original meeting minutes to Generic Letter 89-04.
The question and response are as follows:
Question 25:
Question 25:
Previous to this,     it was permissible to verify closure of stop check valves simply by operation of the stem ( shaft) . Is this acceptable instead of reverse flow testing?
Previous to this, it was closure of stop check valves the stem
( shaft).
Is this reverse flow testing?  


===Response===
===Response===
Verification of closure capability of stop check valves by using the handwheel meets the ASME Code requirements. This, however, is not the pref erred method of test. The NRC staff considers reverse flow testing to be a more reliable indication of valve operability .
permissible to verify simply by operation of acceptable instead of Verification of closure capability of stop check valves by using the handwheel meets the ASME Code requirements.
* S2PV-6R3 4-51 Rev. 3 March 19, 1992
This, however, is not the pref erred method of test.
* INTERIM RELIEF REQUEST V-48 (Cont.)
The NRC staff considers reverse flow testing to be a more reliable indication of valve operability.
However, Item c in the NRC letter dated September 26, 1991 entitled, "Supplement to Minutes of the Public Meetings on Generic Letter 89-04," provided the following revision to the Question 25 response:
4-51 S2PV-6R3 Rev. 3 March 19, 1992  
 
INTERIM RELIEF REQUEST V-48 (Cont.)
However, Item c in the NRC {{letter dated|date=September 26, 1991|text=letter dated September 26, 1991}} entitled, "Supplement to Minutes of the Public Meetings on Generic Letter 89-04," provided the following revision to the Question 25 response:
If a prompt closure of these valves on cessation or reversal of flow is required to accomplish a safety-related function, closure must be verified by reve_rse flow testing or such other positive means as acoustic monitoring or radiography.
If a prompt closure of these valves on cessation or reversal of flow is required to accomplish a safety-related function, closure must be verified by reve_rse flow testing or such other positive means as acoustic monitoring or radiography.
Surry Power station interpreted the original Question 25 response to mean that driving the stem down onto the disk is a valid ASME Code closure test for stop check valves. However, Item C in the revision to the Question 25 response indicates that this test method is not adequate and that reverse flow testing or some other positive means as described above be used.
Surry Power station interpreted the original Question 25 response to mean that driving the stem down onto the disk is a valid ASME Code closure test for stop check valves.
It is not practical to perform a reverse flow test at power for the reason previously stated. It is not practical to perform a reverse flow test during shutdown because it would require that the valve stems remain in the open position during plant
However, Item C in the revision to the Question 25 response indicates that this test method is not adequate and that reverse flow testing or some other positive means as described above be used.
* shutdown. To ensure double valve isolation during a normal shutdown, the secondary plant piping is isolated from the steam source by driving the stem of the stop check valves onto the disk.
It is not practical to perform a reverse flow test at power for the reason previously stated. It is not practical to perform a reverse flow test during shutdown because it would require that the valve stems remain in the open position during plant shutdown.
To ensure double valve isolation during a normal shutdown, the secondary plant piping is isolated from the steam source by driving the stem of the stop check valves onto the disk.
After the plant is shutdown, back seat testing these valves with air would require pressurizing over the disk to verify closure.
After the plant is shutdown, back seat testing these valves with air would require pressurizing over the disk to verify closure.
Given the.mass of the 30" diameter disk and the large volume of pipe involved,*lifting the disk off the seat to show free movement is not practicable. Disassembly and inspection or other visual inspection techniques would be meaningless because the disk could have been driven to the seat during normal shutdown; therefore, the inspection would not prove verification that the disk went freely to its seat after cessation of flow.
Given the.mass of the 30" diameter disk and the large volume of pipe involved,*lifting the disk off the seat to show free movement is not practicable.
Another test method identified in Item C is radiography. This inspection technique suffers the same limitations as the visual inspection techniques discussed above. Also, given the size of these valves (30 11 nominal pipe size diameter) and internal surface irregularities, radiograph resolution would be poor.
Disassembly and inspection or other visual inspection techniques would be meaningless because the disk could have been driven to the seat during normal shutdown; therefore, the inspection would not prove verification that the disk went freely to its seat after cessation of flow.
Another test method identified in Item C is radiography.
This inspection technique suffers the same limitations as the visual inspection techniques discussed above.
Also, given the size of these valves (30 11 nominal pipe size diameter) and internal surface irregularities, radiograph resolution would be poor.
The other test method identified in Item c is acoustic monitoring.* Virginia and Electric Power Company is reviewing in-house and vendor capabilities to acoustically monitor the valves.
The other test method identified in Item c is acoustic monitoring.* Virginia and Electric Power Company is reviewing in-house and vendor capabilities to acoustically monitor the valves.
during shutdown .
during shutdown.
* S2PV-6R3 4-52 Rev. 3 March 19, 1992
4-52 S2PV-6R3 Rev. 3 March 19, 1992  
* INTERIM RELIEF REQUEST V-48 (Cont.)
 
INTERIM RELIEF REQUEST V-48 (Cont.)
Interim Alternate ~esting Proposed During the Surry Unit 2, 1993 refueling outage, one or more test*
Interim Alternate ~esting Proposed During the Surry Unit 2, 1993 refueling outage, one or more test*
methods will be evaluated in the field to determine their practicality. If a test method, as described in Item C,* can be developed, it will be implemented at Surry Power Station Unit 2 during the next refueling outage following the Unit 2 1993 refueling outage.
methods will be evaluated in the field to determine their practicality.
If a test method, as described in Item C,* can be developed, it will be implemented at Surry Power Station Unit 2 during the next refueling outage following the Unit 2 1993 refueling outage.
Until the new test methods are implemented, Surry Power Station will continue to test these stop check valves to the closed position by driving the stem to the disk every cold shutdown.
Until the new test methods are implemented, Surry Power Station will continue to test these stop check valves to the closed position by driving the stem to the disk every cold shutdown.
This test will be adequate to demonstrate that the disk can be properly positioned on the seat.* Also, free movement of the disk from the seat to the full open position is demonstrated when steam flow is established in the mainsteam lines and 100% power is achieved .
This test will be adequate to demonstrate that the disk can be properly positioned on the seat.* Also, free movement of the disk from the seat to the full open position is demonstrated when steam flow is established in the mainsteam lines and 100% power is achieved.
*
(.
(.
* S2PV-6R3 4-53 Rev. 3 March 19, 1992
4-53 S2PV-6R3 Rev. 3 March 19, 1992  
* System Valve(s):
 
Various RELIEF REQUEST V-49 All Valves Subject to Appendix J Leakage Testing (Category A CIV Valves) category: A and AC Class   : Various Function: Limit Leakage to a Specific Maximum Amount Section XI Code Requirement For Which Relief Is Requested IWV-3427(b) - Specifies corrective actions in addition-to IWV-3427(a) for valve sizes of six inches and larger if a leakage rate exceeds the rate determined by the previous test by an amount that reduces the margin between measured leakage rate and the maximum permissible rate by 50%. Also, corrective actions are required if a projection based on thre.e or more tests indicates that the leakage rate of the next scheduled test will exceed the maximum permissible leakage rate by greater than 10%.
RELIEF REQUEST V-49 Various System Valve(s):
Basis For Relief Most valves that are leak rate tested are tested in the "as found" condition, subject to maintenance and retested in the !las left" condition. The valve maintenance is -performed on.a routine basis and it effectively resets the leakage to a small amount.
All Valves Subject to Appendix J Leakage Testing (Category A CIV Valves) category:
A and AC Class Various Function:
Limit Leakage to a Specific Maximum Amount Section XI Code Requirement For Which Relief Is Requested IWV-3427(b) - Specifies corrective actions in addition-to IWV-3427(a) for valve sizes of six inches and larger if a leakage rate exceeds the rate determined by the previous test by an amount that reduces the margin between measured leakage rate and the maximum permissible rate by 50%.
Also, corrective actions are required if a projection based on thre.e or more tests indicates that the leakage rate of the next scheduled test will exceed the maximum permissible leakage rate by greater than 10%.
Basis For Relief Most valves that are leak rate tested are tested in the "as found" condition, subject to maintenance and retested in the !las left" condition.
The valve maintenance is -performed on.a routine basis and it effectively resets the leakage to a small amount.
Therefore; basing corrective actions on previous test results or projections serves no useful function.
Therefore; basing corrective actions on previous test results or projections serves no useful function.
Alternate Testing Proposed.
Alternate Testing Proposed.
The requirements of IWV-3427(a) will be applied; however, the requirements of IWV-3427(b) will not be implemented. The alternate testing presented in this Relief Request conforms to NRC Generic Letter 89-04, Attachment 1, Item 10 .
The requirements of IWV-3427(a) will be applied; however, the requirements of IWV-3427(b) will not be implemented.
* S2PV-6R3 4-54 Rev. 3 March 19, 1992
The alternate testing presented in this Relief Request conforms to NRC Generic Letter 89-04, Attachment 1, Item 10.
* 4.6 VALVE TEST PROGRAM COLD SHUTDOWN JUSTIFICATION Section XI, Paragraphs IWV-3412 and IWV-3522 all---owfor the full stroke exercising of valves during Cold Shutdown (but not more frequently than every three months) if the valves cannot be exercised during normal operation. Therefore, no request for relief from
4-54 S2PV-6R3 Rev. 3 March 19, 1992  
          .testing every three months is necessary.
 
However, the code does require that these .valves be specifically id'entified by the owner. The cold shutdown justifications identify and provide the technical basis for valves exercised during cold shutdown but not during normal operation .
4.6 VALVE TEST PROGRAM COLD SHUTDOWN JUSTIFICATION S2PV-6R3 Section XI, Paragraphs IWV-3412 and IWV-3522 all---owfor the full stroke exercising of valves during Cold Shutdown (but not more frequently than every three months) if the valves cannot be exercised during normal operation.
*
Therefore, no request for relief from  
* S2PV-6R3 4-55 Rev. 3 March 19, 1992
.testing every three months is necessary.
* system Valve{s):
However, the code does require that these.valves be specifically id'entified by the owner.
COLD SHUTDOWN JUSTIFICATION CSV-1 Main steam 2-MS-TV-201A 2-MS-TV-201B 2-MS-TV-201C Category:   B Class       2 Function: Main Steam Line Trip Valves Cold Shutdown Justification Full stroke or part stroke exercising of these valves during power operation could result in a turbine and reactor trip.
The cold shutdown justifications identify and provide the technical basis for valves exercised during cold shutdown but not during normal operation.
Note: The technical specification acceptance* criteria are more limiting than the standard Section XI test criteria because the technical specification requires the measurement of elapsed time from the manual initiation of steam line isolation to initiation of main trip valve
4-55 Rev. 3 March 19, 1992  
**        motion {must be less than or equal to 4.0 seconds) and the measurement of elapsed time from full open to full closed
 
{must be less than or equal to 5.0 seconds). If either of the limiting times are exceeded, the valve fails the test.
COLD SHUTDOWN JUSTIFICATION CSV-1 system Main steam Valve{s):
Section XI requires the measurement of elapsed time from initiation of steam line isolation to full valve closure, which is a less conservative test .
2-MS-TV-201A 2-MS-TV-201B 2-MS-TV-201C Category:
* S2PV-6R3 4-56 Rev. 3 March 19,* 1992
B Class 2
* COLD SHUTDOWN JUSTIFICATION CSV-2 Replaced by Interim Relief Request V-48 COLD SHUTDOWN JUSTIFICATION CSV-3 Cold Shutdown Justification Withdrawn .
Function:
*
Main Steam Line Trip Valves Cold Shutdown Justification Full stroke or part stroke exercising of these valves during power operation could result in a turbine and reactor trip.
* S2PV-6R3 4-57 Rev. 3 March 19, 1992
Note:
* System Valve(s):
The technical specification acceptance* criteria are more limiting than the standard Section XI test criteria because the technical specification requires the measurement of elapsed time from the manual initiation of steam line isolation to initiation of main trip valve motion {must be less than or equal to 4.0 seconds) and the measurement of elapsed time from full open to full closed
COLD SHUTDOWN JUSTIFICATION CSV-4 Auxiliary Feedwater Valves affected by this justification are identified by Table A.
{must be less than or equal to 5.0 seconds).
If either of the limiting times are exceeded, the valve fails the test.
Section XI requires the measurement of elapsed time from initiation of steam line isolation to full valve closure, which is a less conservative test.
4-56 S2PV-6R3 Rev. 3 March 19,* 1992  
 
COLD SHUTDOWN JUSTIFICATION CSV-2 Replaced by Interim Relief Request V-48 COLD SHUTDOWN JUSTIFICATION CSV-3 Cold Shutdown Justification Withdrawn.
4-57 S2PV-6R3 Rev. 3 March 19, 1992  
 
System Valve(s):
Category:
Category:
Class Function:
Class Function:
Cold Shutdown Justification Partial or full opening these valves during power operation .would introduce cold auxiliary feedwater to the. steam generators resulting in thermal stress and possible steam generator tube degradation.
COLD SHUTDOWN JUSTIFICATION CSV-4 Auxiliary Feedwater Valves affected by this justification are identified by Table A.
To test valves 2-FW-142, 157 and 172 to the closed position, flow must be established to the steam generators in order to back seat the valves on the discharge side of the non-running pumps. This test would also introduce cold auxiliary feedwater to the steam
Cold Shutdown Justification Partial or full opening these valves during power operation.would introduce cold auxiliary feedwater to the. steam generators resulting in thermal stress and possible steam generator tube degradation.
* gerierators if performed during nor~al operation .
To test valves 2-FW-142, 157 and 172 to the closed position, flow must be established to the steam generators in order to back seat the valves on the discharge side of the non-running pumps.
* S2PV-6R3
This test would also introduce cold auxiliary feedwater to the steam gerierators if performed during nor~al operation.  
                                    . 4-58 Rev. 3 March 19, 1992*
. 4-58 S2PV-6R3 Rev. 3 March 19, 1992*  


** .Valve COLD SHUTDOWN JUSTIFICATION CSV-4 (Cont.)
.Valve 2-FW-27 2-FW-58 2-FW-89 2-FW-131 2-FW-133 2-FW-136 2-FW-138 2-FW-142 2-FW-157 2-FW-172 2-FW:-272 2-FW-273 2-FW-e305 2-FW-306 S2PV-6R3 COLD SHUTDOWN JUSTIFICATION CSV-4 (Cont.)
Category TABLE A Class  Function 2-FW-27           C          2      Auxiliary Feedwater Header 2-FW-58                             Check at Main Feedwater 2-FW-89                             Header Valves 2-FW-131         C          2      Auxiliary Feedwater Header 2-FW-133                             Check Valves at 2-FW-136                             Containment Penetration 2-FW-138 2-FW-142         C          3      Auxiliary Feedwate:t Pump 2-FW-157                             Discharge *Check Valves 2-FW-172 2-FW:-272         C         2       Check Valves at 2-FW-273                            Containment Penetration (Cross-Connect for Unit 1 Aux. Feed. from Unit 2)
TABLE A Category Class Function C
* 2-FW-e305        C         2       Check Valves at 2-FW-306                            Containment Penetration (Cross-Connect for Unit 1 Aux. Feed. from Unit 2)
2 Auxiliary Feedwater Header Check at Main Feedwater Header Valves C
* S2PV-6R3 4-59 Rev. 3 March 19, 1992
2 Auxiliary Feedwater Header Check Valves at Containment Penetration C
* system Valve(s):
3 Auxiliary Feedwate:t Pump Discharge *Check Valves C
COLD SHUTDOWN JUSTIFICATION CSV-5 Component Cooling Valves affected by this justifica~ion are identified by Table B Category:
2 Check Valves at Containment Penetration (Cross-Connect for Unit 1 Aux. Feed. from Unit 2)
C 2
Check Valves at Containment Penetration (Cross-Connect for Unit 1 Aux. Feed. from Unit 2) 4-59 Rev. 3 March 19, 1992  
 
system Valve(s):
Category:
Class Function:
Class Function:
Cold Shutdown Justification These valves are.located in the containment and may be normally open or closed depending on system lineup. A containment entry and manipulation of other system valves are necessary to test these valves to either the open or closed position. This is*
COLD SHUTDOWN JUSTIFICATION CSV-5 Component Cooling Valves affected by this justifica~ion are identified by Table B Cold Shutdown Justification These valves are.located in the containment and may be normally open or closed depending on system lineup.
A containment entry and manipulation of other system valves are necessary to test these valves to either the open or closed position.
This is*
considered impractical during power operation.
considered impractical during power operation.
* TABLE B Valve               Category  Class  Function 2-CC-176           C         3       Component Cooling to RHR 2-CC-177                              Heat Exchanger Check Valves 2-CC-242            C         3       Component Cooling to 2-CC-233                              Reactor Containment Air
Valve 2-CC-176 2-CC-177 2-CC-242 2-CC-233
* 2-CC-224                              Recirculation Coolers
* 2-CC-224 S2PV-6R3 Category C
* S2PV-6R3 4-60 Rev. 3 March 19, 1992
C TABLE B Class Function 3
* system Valve (s) :
Component Cooling to RHR Heat Exchanger Check Valves 3
COLD SHUTDOWN JUSTIFICATION CSV-6 Component Cooling
Component Cooling to Reactor Containment Air Recirculation Coolers 4-60 Rev. 3 March 19, 1992
                .Valves affected by this justification are identified by Table C.
 
COLD SHUTDOWN JUSTIFICATION CSV-6 system Component Cooling Valve (s) :
.Valves affected by this justification are identified by Table C.
category:
Class
. Function:
Cold.Shutdown Justification To perform an operability or a fail-safe test, the component cooling lines must be isolated, thereby stopping the flow of cooling water to the Reactor Coolant Pumps.
Loss of cooling water to these pumps can be damaging, even for short periods of time.
Valve 2-cc-1 2-CC-58 2-CC-59 2-CC-TV-205A 2-CC-TV-205B 2-CC-TV-205C S2PV-6R3 Category C
B TABLE C Class Function 3
Component Cooling to Reactor Coolant Pumps 3
Component Cooling from Reactor Coolant Pumps 4-61 Rev. 3*
March 19, 1992
 
COLD SHUTDOWN JUSTIFICATION CSV-7 System Reactor Coolant Valve(s):
2-RC-PCV-2456 2-RC-PCV-2455C Category:
BC Class 1
Function:
Pressurizer Power Operated Relief Valves Cold Shutdown Justification These pressurizer power operated relief valves have shown a high probability of sticking open while being exercised during power operation.
Also, these valves are not required for overpressure protection unless the primary system temperature is under 350 degre~s F per Technical Specification Paragraph 3.1.G.1.b(3).
These valves will be tested on approach to Cold Shutdown and testing shall not be deferred.
4-62 S2PV-6R3.
Rev. 3 March 19, 1992
 
COLD SHUTDOWN JUSTIFICATION CSV-8 System Residual Heat Removal Valve(s):
2-RH-5 2-RH-11 2-RH-47 Category:
C Class 1 (2-RH-47), 2 (2-RH-5 and 11)
Function:
RHR Pump Discharge Check Valve Cold* Shutdown Justification*
These valves can only be partial or full stroke exercised to the open position and verified closed during the testing of RHR pumps 2-RH-P-lA and lB (refer to Relief Request P-7).
The low pressure pumps take suction.from and discharge to the reactor coolant system which operates at 2235 psig.
This pressure is well above the operating pressure of the pumps; therefore, testing during normal operation is not possible.
4-63 S2PV-6R3 Rev. 3 March 19, 1992
 
COLD SHUTDOWN JUSTIFICATION CSV-9 System Residual Heat Removal Valve(s):
2-RH-MOV-2700 2-RH-MOV-2701 category:
B Class 1
Function:
RHR suction form Reactor Coolant System Cold Shutdown Justification These valves are interlocked with Reactor Coolant System pressure such that the valves cannot be opened at elevated reactor coolant system pressure.
Overpressurization of the suction line may cause a LOCA.
The interlocks cannot be bypassed with normal control-circuits.
4-64
,S2PV-6R3 Rev. 3 March 19, 1992  
 
COLD SHUTDOWN JUSTIFICATION CSV-10 System Residual Heat Removal Valve(s):
2-RH-MOV-2720A 2-RH-MOV-2720B Category:
B Class 1
Function:
RHR Discharge to Reactor Coolant System Cold Shutdown Justification With the MOV* shut and if its respective check valve is leaking, there is no way to determine whether or not an-overpressure condition exists before opening the MOV.
If the MOV was opened and an overpressure condition did exist between the MOV and the RCS, the primary pressure of 2235 psig will be released on the Residual Heat Removal System with a relief valve setting of 700 psig.
This would be an unnecessary challenge to the Residual Heat *Removal System.
Since the MOV is also part of the discharge piping of an accumulator, there is a possibility of discharging an accu~ulator.
into the RHR system and disabling it.
The accumulators are maintained at *pressure above the normal operating or shutdown pressure o_f the Residual Heat Removal System.
Opening of these valves wo~ld dump accumulator water into the Residual Heat Removal System.
This will dilute the boron concentration of the accumulator as well as lower its level and pressure, which is a violation of Technical Specifications.
4-65 S2PV-6R3 Rev. 3 March 19, 1992
 
System Valve(s):
Category:
COLD SHUTDOWN JUSTIFICATION CSV-11 Chemical and Volume Control 2-CH-LCV-2115C 2-CH-LCV-2115E B
Class 2
Function:* Charging Pump Suction from Volume Control Tanks Cold Shutdown Justification Partial or full stroke exercising these valves during power operation would require the charging pump suctions to be aligned with the refueling water storage tank.
This would cause a sudden increase in Reactor Coolant System boron inventory, which would cause a plant transient.
4-66 S2PV-6R3 Rev. 3 March 19, 1992
 
COLD SHUTDOWN JUSTIFICATION CSV-12 Cold Shutdown Justification Withdrawn 4-67*
S2PV-6R3 Rev. 3 March 19, 1992
 
System Valve(s):
Category:
Class
*Function:
COLD SHUTDOWN JUSTIFICATION CSV-13 Chemical and Volume Control 2-CH-MOV-2381 A
2 Reactor Coolant Pump Seal Water Return Cold Shutdown Justification:
Closure of this valve with Reactor Coolant Pumps in operation will cause a loss of seal flow resulting in possible pump seal damage.
4-68 S2PV-6R3 Rev. 3 March 19, 1992
 
System Valve(s):
category:
category:
Class
Class Function:
  . Function:
COLD SHUTDOWN JUSTIFICATION CSV-14 Residual Heat Removal 2-RH-FCV-2605 2-RH-HCV-2758 B
Cold.Shutdown Justification To perform an operability or a fail-safe test, the component cooling lines must be isolated, thereby stopping the flow of cooling water to the Reactor Coolant Pumps. Loss of cooling water to these pumps can be damaging, even for short periods of time.
2 Residual Heat Removal Exchanger flow control Cold Shutdown Justification These valves have no remot~ position indication and are located inside containment.
* Valve 2-cc-1 Category C
The valves can only be exercised (partial or full stroke) and timed by locally observing stern movement.
TABLE C Class 3
Because a containment entry is required to perform the exercise and fail-safe tests, it will be conducted every cold shutdown.
Function Component Cooling to 2-CC-58                                  Reactor Coolant Pumps 2-CC-59 2-CC-TV-205A          B          3      Component Cooling from 2-CC-TV-205B                            Reactor Coolant Pumps 2-CC-TV-205C
4-69 S2PV-6R3 Rev. 3 March 19, 1992  
* S2PV-6R3 4-61 Rev. 3*
March 19, 1992
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-7 Reactor Coolant 2-RC-PCV-2456 2-RC-PCV-2455C Category:  BC Class    : 1 Function:  Pressurizer Power Operated Relief Valves Cold Shutdown Justification These pressurizer power operated relief valves have shown a high probability of sticking open while being exercised during power operation. Also, these valves are not required for overpressure protection unless the primary system temperature is under 350 degre~s F per Technical Specification Paragraph 3.1.G.1.b(3).
These valves will be tested on approach to Cold Shutdown and testing shall not be deferred .
*
* S2PV-6R3.
4-62 Rev. 3 March 19, 1992
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-8 Residual Heat Removal 2-RH-5 2-RH-11 2-RH-47 Category:  C Class      1 (2-RH-47), 2 (2-RH-5 and 11)
Function:  RHR Pump Discharge Check Valve Cold* Shutdown Justification*
These valves can only be partial or full stroke exercised to the open position and verified closed during the testing of RHR pumps 2-RH-P-lA and lB (refer to Relief Request P-7). The low pressure pumps take suction.from and discharge to the reactor coolant system which operates at 2235 psig. This pressure is well above the operating pressure of the pumps; therefore, testing during normal operation is not possible .
*
* S2PV-6R3 4-63 Rev. 3 March 19, 1992
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-9 Residual Heat Removal 2-RH-MOV-2700 2-RH-MOV-2701 category:  B Class    : 1 Function:  RHR suction form Reactor Coolant System Cold Shutdown Justification These valves are interlocked with Reactor Coolant System pressure such that the valves cannot be opened at elevated reactor coolant system pressure. Overpressurization of the suction line may cause a LOCA. The interlocks cannot be bypassed with normal control-circuits .
*
* ,S2PV-6R3 4-64 Rev. 3 March 19, 1992
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-10 Residual Heat Removal 2-RH-MOV-2720A 2-RH-MOV-2720B Category:  B Class      1 Function:  RHR Discharge to Reactor Coolant System Cold Shutdown Justification With the MOV* shut and if its respective check valve is leaking, there is no way to determine whether or not an-overpressure condition exists before opening the MOV.
If the MOV was opened and an overpressure condition did exist between the MOV and the RCS, the primary pressure of 2235 psig will be released on the Residual Heat Removal System with a relief valve setting of 700 psig. This would be an unnecessary challenge to the Residual Heat *Removal System .
** Since the MOV is also part of the discharge piping of an accumulator, there is a possibility of discharging an accu~ulator.
into the RHR system and disabling it. The accumulators are maintained at *pressure above the normal operating or shutdown pressure o_f the Residual Heat Removal System. Opening of these valves wo~ld dump accumulator water into the Residual Heat Removal System. This will dilute the boron concentration of the accumulator as well as lower its level and pressure, which is a violation of Technical Specifications .
* S2PV-6R3 4-65 Rev. 3 March 19, 1992
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-11 Chemical and Volume Control 2-CH-LCV-2115C 2-CH-LCV-2115E Category:  B Class    : 2 Function:* Charging Pump Suction from Volume Control Tanks Cold Shutdown Justification Partial or full stroke exercising these valves during power operation would require the charging pump suctions to be aligned with the refueling water storage tank. This would cause a sudden increase in Reactor Coolant System boron inventory, which would cause a plant transient .
*
* S2PV-6R3 4-66 Rev. 3 March 19, 1992
* COLD SHUTDOWN JUSTIFICATION CSV-12 Cold Shutdown Justification Withdrawn
*
* S2PV-6R3 4-67*
Rev. 3 March 19, 1992
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-13 Chemical and Volume Control 2-CH-MOV-2381 Category:  A Class      2
  *Function:  Reactor Coolant Pump Seal Water Return Cold Shutdown Justification:
Closure of this valve with Reactor Coolant Pumps in operation will cause a loss of seal flow resulting in possible pump seal damage .
*
* S2PV-6R3 4-68 Rev. 3 March 19, 1992
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-14 Residual Heat Removal 2-RH-FCV-2605 2-RH-HCV-2758 category:    B Class        2 Function:    Residual Heat Removal Exchanger flow control Cold Shutdown Justification These valves have no remot~ position indication and are located inside containment. The valves can only be exercised (partial or full stroke) and timed by locally observing stern movement.
Because a containment entry is required to perform the exercise and fail-safe tests, it will be conducted every cold shutdown .
*
* S2PV-6R3 4-69 Rev. 3 March 19, 1992


** -systein Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-15  
COLD SHUTDOWN JUSTIFICATION CSV-15 Chemical and Volume Control 2-CH-TV-2204A       2-CH-LCV-2460A 2-CH-TV-2204B      2-CH-LCV-2460B category:    A (2-CH-TV-2204A, B) and B {2-CH-LCV-2460A, B)
-systein Chemical and Volume Control Valve(s):
Class    . . 1 {2-CH-LCV-2460A, B) and_ 2 (2-CH-TV-2204A, B)
2-CH-TV-2204A 2-CH-LCV-2460A 2-CH-LCV-2460B category:
Function:    Reactor Coolant system Letdown Isolation Trip and Level Control Valves Cold Shutdown Justification Exercising these valves during power operation interrupts letdown flow from the reactor coola_nt system (RCS) to the volume control tank. If the valves should fail closed, reactor coolant inventory control would be lost.
Class Function:
* The pressurizer level control program controls reactor coolant inventory by regulating the operation of the charging flow control valve so that the charging input flow to the RCS and
2-CH-TV-2204B A (2-CH-TV-2204A, B) and B {2-CH-LCV-2460A, B) 1 {2-CH-LCV-2460A, B) and_ 2 (2-CH-TV-2204A, B)
* reactor coolant pump seal injection flow into the RCS matches letdown flow.
Reactor Coolant system Letdown Isolation Trip and Level Control Valves Cold Shutdown Justification Exercising these valves during power operation interrupts letdown flow from the reactor coola_nt system (RCS) to the volume control tank.
If the valves should fail closed, reactor coolant inventory control would be lost.
* The pressurizer level control program controls reactor coolant inventory by regulating the operation of the charging flow control valve so that the charging input flow to the RCS and reactor coolant pump seal injection flow into the RCS matches letdown flow.
Also, exercising these valves during normal operation will interrupt letdown flow through the regenerative heat exchanger.
Also, exercising these valves during normal operation will interrupt letdown flow through the regenerative heat exchanger.
This flow interruption would allow a slug of relatively cool charging water to thermal shock the nozzle connecting the 3 11 charging line to the 27" loop 2 cold leg injection line.
This flow interruption would allow a slug of relatively cool charging water to thermal shock the nozzle connecting the 3 11 charging line to the 27" loop 2 cold leg injection line.
The valve controllers do not allow for a part stroke exercise test .
The valve controllers do not allow for a part stroke exercise test.
* S2PV-6R3 4-70 Rev. 3 March 19, 1992
4-70 S2PV-6R3 Rev. 3 March 19, 1992  
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-16 Chemical and Volume Control 2-CH-MOV-2289A 2-CH-MOV-2289B Category:  A (2-CH-MOV-2289A) and B (2-CH-MOV-2289B)
Class    . 2 Function:  Normal Charging Header Isolation Cold Shutdown Justification Failure of these valves*in the closed position during exercising would cause a loss of charging flow and could result in an inability to maintain reactor coolant inventory .
*
* S2PV-6R3 4-71 Rev. 3 March 19, 1992
* Syste~
Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-17 Safety Injection 2-SI-MOV-2890C Category:  A Class    : 2 Function:  Low Head Safety Injection to Reactor Coolant System Cold Legs Cold Shutdown Justification In accordance with Technical Specification 3.3.A.8, during power operation; the A.C. power shall be removed from 2-SI-MOV-2890C.
with the valve in the open position. If this valve was stroked during power operation and failed in the closed position, the Low Head Safety Injection System would be rendered inoperable .
*
* S2PV-6R3 4-72 Rev. 3 March 19, 1992


COLD SHUTDOWN JUSTIFICATION CSV-16 System Chemical and Volume Control Valve(s):
2-CH-MOV-2289A 2-CH-MOV-2289B Category:
A (2-CH-MOV-2289A) and B (2-CH-MOV-2289B)
Class 2
Function:
Normal Charging Header Isolation Cold Shutdown Justification Failure of these valves*in the closed position during exercising would cause a loss of charging flow and could result in an inability to maintain reactor coolant inventory.
4-71 S2PV-6R3 Rev. 3 March 19, 1992
COLD SHUTDOWN JUSTIFICATION CSV-17 Syste~
Safety Injection Valve(s):
2-SI-MOV-2890C Category:
A Class 2
Function:
Low Head Safety Injection to Reactor Coolant System Cold Legs Cold Shutdown Justification In accordance with Technical Specification 3.3.A.8, during power operation; the A.C. power shall be removed from 2-SI-MOV-2890C.
with the valve in the open position.
If this valve was stroked during power operation and failed in the closed position, the Low Head Safety Injection System would be rendered inoperable.
4-72 S2PV-6R3 Rev. 3 March 19, 1992
COLD SHUTDOWN JUSTIFICATION CSV-18 System Safety Injection Valve(s):
2-SI-MOV-2867C 2-SI-MOV-2867D Category:
A Class 2
Function:
High Head Safety Injection Isolation Cold Shutdown Justification These valves cannot be partial or full stroke exercised during power operation.
Opening these valves would allow excess charging flow into the Reactor Coolant System causing a reactivity transient.
4-73 S2PV-6R3 Rev. 3 March 19, 1992*
I~
I~
* System Valve(s):
COLD SHUTDOWN JUSTIFICATION CSV-18 Safety Injection 2-SI-MOV-2867C 2-SI-MOV-2867D Category:  A Class      2 Function:  High Head Safety Injection Isolation Cold Shutdown Justification These valves cannot be partial or full stroke exercised during power operation. Opening these valves would allow excess charging flow into the Reactor Coolant System causing a reactivity transient .
*
* S2PV-6R3 4-73 Rev. 3 March 19, 1992*


l:".'!11
COLD SHUTDOWN JUSTIFICATION CSV-19 System Chemical and Volume Control Valve(s):
* System Valve(s):
2-CH-225 2-CH-227 2-CH-MOV-2350 2-CH-228 2-CH-229 Category:
COLD SHUTDOWN JUSTIFICATION CSV-19 Chemical and Volume Control 2-CH-225         2-CH-228 2-CH-227        2-CH-229 2-CH-MOV-2350 Category: B (2-~H-MOV-2350, 2-CH-228) and C (2~CH-225,227,229)
B (2-~H-MOV-2350, 2-CH-228) and C (2~CH-225,227,229)
Class     2 Function: Emergency and Manual Emergency Boration Line Isolation Valves Cold Shutdown Justification To achieve full flow through Check valves and 2-CH-225, 227 and 229, the boric acid transfer pumps must be set at high speed, which could inject enough boric acid into the reactor coolant system to cause a reactor power transient. Under.normal plant operating conditions or when the plant is shutdow~, yalve 2-CH-MOV-2350 can be full stroke exercised and valves 2-CH-225, 227
Class 2
* and 229 can be part stroked exercised with the boric acid transfer pumps.set on low speed to minimize the amount of boric acid injected into the reactor coolant system. However, during power operation when the concentration of boric acid in the reactor coolant system is low, the addition of boric acid will produce an und_esirable transient in reactor power.
Function:
Emergency and Manual Emergency Boration Line Isolation Valves Cold Shutdown Justification To achieve full flow through Check valves and 2-CH-225, 227 and 229, the boric acid transfer pumps must be set at high speed, which could inject enough boric acid into the reactor coolant system to cause a reactor power transient.
Under.normal plant operating conditions or when the plant is shutdow~, yalve 2-CH-MOV-2350 can be full stroke exercised and valves 2-CH-225, 227 and 229 can be part stroked exercised with the boric acid transfer pumps.set on low speed to minimize the amount of boric acid injected into the reactor coolant system.
However, during power operation when the concentration of boric acid in the reactor coolant system is low, the addition of boric acid will produce an und_esirable transient in reactor power.
* Low concentrations of boric acid occur* near the end of the fuel cycle.
* Low concentrations of boric acid occur* near the end of the fuel cycle.
Manual valve 2-CH-228 will be stroked open when the alternate boration path is established every cold shutdown. The increased level of safety gained be exercising this valve every quarter does not justify the added burden of performing a separate test just for the manual valve.
Manual valve 2-CH-228 will be stroked open when the alternate boration path is established every cold shutdown.
* Valve 2-CH-MOV-2350 will be full stroke exercised and check valves 2-CH-225, 227 and 229 will be part stroked exercised every quarter during normal operation when the reactor coolant boric acid concentration is above 100 ppm. Check valves 2-CH-225, 227 and 229, and manual valve 2-CH-228 will be full stroked exercised every cold shutdown .
The increased level of safety gained be exercising this valve every quarter does not justify the added burden of performing a separate test just for the manual valve.
* S2PV-6R3 4-74 Rev. 3 March 19, 1992
Valve 2-CH-MOV-2350 will be full stroke exercised and check valves 2-CH-225, 227 and 229 will be part stroked exercised every quarter during normal operation when the reactor coolant boric acid concentration is above 100 ppm.
* System Valve(s):
Check valves 2-CH-225, 227 and 229, and manual valve 2-CH-228 will be full stroked exercised every cold shutdown.
          ..
4-74 S2PV-6R3 Rev. 3 March 19, 1992 l:".'!11
COLD SHUTDOWN JUSTIFICATION CSV-20 Chemical and Volume Control 2-CH-309                                               1 category:   AC Class     : 2 Function:   Normal Charging Isolation Check Valve Cold Shutdown Justification Closure testing of 1-CH-309 cannot be performed during power operation because the*test would interrupt the normal charging flow path .
 
*
System..
* S2PV-6R3 4-75 Rev. 3 March 19, 1992
COLD SHUTDOWN JUSTIFICATION CSV-20 Chemical and Volume Control Valve(s):
* System Valve(s):
2-CH-309 category:
COLD SHUTDOWN JUSTIFICATION CSV-21 steam Generator Blowdown 2-BD-TV-200A       2-BD-TV-200D 2-BD-TV-200B      2-BD-TV-200E 2-BD-TV-200C      2-BD-TV-200F Category:  B Class    :  2 Function:   steam Generator Blowdown Isolation Cold Shutdown Justification Closing these valves during power operation causes the downstream piping to become empty due to drainage and water flashing to steam. When the valves reopen, a flow surge could occur which automatically isolates the inner valves due to high flow. Then a
AC Class 2
  .containment entry is necessary to reset these valves and ~pon reopening the process may occur.again *
Function:
*
Normal Charging Isolation Check Valve Cold Shutdown Justification Closure testing of 1-CH-309 cannot be performed during power operation because the*test would interrupt the normal charging flow path.
* S2PV-6R3 4-76 Rev. 3 March 19, 1992
4-75 S2PV-6R3 Rev. 3 March 19, 1992 1
* COLD SHUTDOWN JUSTIFICATION CSV-22 Cold Shutdown Justification Withdrawn COLD SHUTDOWN JUSTIFICATION CSV-23 Replaced by Relief Request V-43 COLD SHUTDOWN JUSTIFICATION CSV-24 Cold Shutdown Justification Withdrawn
 
*
COLD SHUTDOWN JUSTIFICATION CSV-21 System steam Generator Blowdown Valve(s):
* S2PV-6R3 4-77 Rev. 3 March 19, 1992
2-BD-TV-200A 2-BD-TV-200B 2-BD-TV-200C Category:
* System Valve(s):
B Class 2
COLD SHUTDOWN JUSTIFICATION CSV-25 Safety Injection 2-SI-MOV-2842 2-SI-MOV-2869A 2-SI-MOV-2869B Category:   A Class       2 Function:   High Head Safety*Injection to reactor Coolant System Cold Shutdown Justification These.valves cannot ~e partial or full stroke exercised during power operation. Opening these valves would allow excess charging-flow into the Reactor Coolant System causing a reactivity transient and possible thermal shock to the High Head Safety _Injection System.
2-BD-TV-200D 2-BD-TV-200E 2-BD-TV-200F Function:
* Also, according to Technical Specification 3.3.A.9, A. C. power shall be removed with the valves in the closed position during
steam Generator Blowdown Isolation Cold Shutdown Justification Closing these valves during power operation causes the downstream piping to become empty due to drainage and water flashing to steam.
* power operation ..
When the valves reopen, a flow surge could occur which automatically isolates the inner valves due to high flow.
* S2PV-6R3 4-78 Rev. 3 March 19, 1992
Then a  
* System Valve(s):
.containment entry is necessary to reset these valves and ~pon reopening the process may occur.again
COLD SHUTDOWN JUSTIFICATION CSV-26 Component Cooling 2-CC-181 2-CC-185 Category: B (manual)
* 4-76 S2PV-6R3 Rev. 3 March 19, 1992  
Class     3 Function: Component Cooling Supply/Return to/from RHR Heat Exchanger Isolation Valves Cold Shutdown Justification A containment entry is required to exercise these manual butterfly valves. Therefore, they will be exercised every cold shutdown .
 
*
COLD SHUTDOWN JUSTIFICATION CSV-22 Cold Shutdown Justification Withdrawn COLD SHUTDOWN JUSTIFICATION CSV-23 Replaced by Relief Request V-43 COLD SHUTDOWN JUSTIFICATION CSV-24 Cold Shutdown Justification Withdrawn 4-77 S2PV-6R3 Rev. 3 March 19, 1992  
                                                                    '!
 
* S2PV-6R3 4-79 Rev. 3 March 19, 1992
COLD SHUTDOWN JUSTIFICATION CSV-25 System Safety Injection Valve(s):
* System Valve(s):
2-SI-MOV-2842 2-SI-MOV-2869A 2-SI-MOV-2869B Category:
COLD SHUTDOWN JUSTIFICATION CSV-27 Component Cooling 2-CC-TV-207 2-CC-TV-220A 2-CC-TV-220B 2-CC-TV-220C category: B Class   :  3 Function: Component Cooling Return from Reactor Coolant Pump Thermal Barrier Isolation Valves Cold Shutdown Justification Exercising these valves during normal operation would isolate.*
A Class 2
component cooling water to the reactor coolant pump thermal barriers. Cooling water m&#xb5;st be available to the reactor coolant pump thermal barriers when the reactor coolant system temperature is above 200 &deg;F. Col&deg;d shutdown is entered when the reactor
Function:
* coolant system temperature drops below 200 &deg;F. The valve controllers do not allow for a part stroke exercise test.
High Head Safety*Injection to reactor Coolant System Cold Shutdown Justification These.valves cannot ~e partial or full stroke exercised during power operation.
These valves will be full stroke tested every cold shutdown .
Opening these valves would allow excess charging-flow into the Reactor Coolant System causing a reactivity transient and possible thermal shock to the High Head Safety _Injection System.
* S2PV-6R3 4-80 Rev. 3 March 19, 1992
Also, according to Technical Specification 3.3.A.9, A. C. power shall be removed with the valves in the closed position during power operation..
* system Valve(s):
4-78 S2PV-6R3 Rev. 3 March 19, 1992  
COLD SHUTDO~ JUSTIFICATION CSV-28 Feedwater 2-FW-FCV-2478     2-FW-FCV-255A 2-FW-FCV-2488      2-FW-FCV-255B 2-FW-FCV-2498      2-FW-FCV-255C Category:  B Class    : NC Function: Main Feedwater Regulating and Regulating Bypass Isolation Valves Cold Shutdown Justification These valves are in positions required to sustain power operation. Full stroke exercising the valves would result in a reactor trip. The main feedwater regulating valves 2-FW-FCV-2478, 2488 and 2498 move during normal operation as they perform their regulating function. The bypass valves 2-FW-FCV-255A, B and C remain closed during power operation.
 
* These valves will be part stroke exercised every three months and full stroke exercised every cold shutdown .
COLD SHUTDOWN JUSTIFICATION CSV-26 System Component Cooling Valve(s):
* S2PV-6R3 4-81 Rev. 3 March 19, 1992
2-CC-181 2-CC-185 Category:
* System V_alve (s):
B (manual)
COLD SHUTDOWN JUSTIFICATION CSV-29 Safety Injection 2-SI-109 2-SI-130 2-SI-147 Category:   C Class       1 Function:   SI Accumulator Discharge Isolation Check Valve Cold Shutdown Justification These check valves are located inside containment and are back seat tested using the installed sampling system. To ensure that all of the leakage that could pass by the check valves is collected, the accumulator discharge motor operated valves (2-SI-MOV-2865A, Band C) must be closed. However, these motor operated valves must be open and de-energized when the reactor coolant system pressure is above 1000 psig according to Technical
Class 3
** Specification Paragraph 3.3.A.10. Therefore, the accumulator check valves will be tested to the closed position every cold shutdown .
Function:
* S2PV-6R3 4.,..a2 Rev. 3 March 19, 19,92
Component Cooling Supply/Return to/from RHR Heat Exchanger Isolation Valves Cold Shutdown Justification A containment entry is required to exercise these manual butterfly valves.
* System Valve(s):
Therefore, they will be exercised every cold shutdown.
          .
4-79 S2PV-6R3 Rev. 3 March 19, 1992  
COLD SHUTDOWN JUSTIFICATION CSV-30 Component Cooling 2-CC-806 category: C Class     3 Function: Charging Pump Seal Cooling Surge Tank Makeup Valve Cold Shutdown Justification This valve must open to provide a flow path from the component cooling water system to the charging pump seal water surge tank as a supply of makeup water to the surge tank.* There is no flow instrumentation to verify partial or full flow for the check valve.
 
There is level instrumentation on the surge tank. The surge tank can be isolated, dr,ained down and refilled. However, the surge tank provides the NPSH for the charging pump cooling water pumps and it should not be isolated from the system during normal
COLD SHUTDOWN JUSTIFICATION CSV-27 System Component Cooling Valve(s):
* operation when component cooling.water for the charging pumps is required.
2-CC-TV-207 2-CC-TV-220A 2-CC-TV-220B 2-CC-TV-220C category:
This valve will be tested to the full open position every cold shutdown .
B Class 3
* S2PV-6R3 4-83 Rev. 3 March 19, 1992
Function:
* System Valve(s):
Component Cooling Return from Reactor Coolant Pump Thermal Barrier Isolation Valves Cold Shutdown Justification Exercising these valves during normal operation would isolate.*
COLD SHUTDOWN JUSTIFICATION CSV-31 Component Cooling 2-CC-LCV-201 Category: B Class     3 Function: Charging Pump Seal Cooling Surge Tank Level Control Valve Cold Shutdown Justification This valve must open to maintain the level in the charging.pump seal water surge tank and must close to prevent overflowing the surge tank and potentially draining the surge tank through the over flow line. The valve fails closed on lose of operating air.
component cooling water to the reactor coolant pump thermal barriers.
Valve position is determine solely from tank level. In order to manipulate the valve for testing, the surge tank must be isolated. However, the surge tank providei the NPSH for the charging pump cooling water pumps and it should not be isolated
Cooling water m&#xb5;st be available to the reactor coolant pump thermal barriers when the reactor coolant system temperature is above 200 &deg;F.
* from the system during normal operation when component cooling water for the charging pumps is required.
Col&deg;d shutdown is entered when the reactor coolant system temperature drops below 200 &deg;F.
This valve will be exercise to the open_and closed positions every cold shutdown .
The valve controllers do not allow for a part stroke exercise test.
* S2PV-6R3 4-84 Rev. 3 March 19, 1992
These valves will be full stroke tested every cold shutdown.
* 4.7   ALTERNATIVE TESTING FOR NON-CODE VALVES According to the minutes of public meeting on Gen~-c Letter 89-04, "Paragraph (g) of lOCFR 50.55a requires the use of Section XI of the-ASME Code for inservice testing of components covered by the Code. For other components important to safety, the licensee also has the burden of demonstrating their continued operability." The minutes go on to state that, "The Code-required IST program is a reasonable vehicle to provide a periodic demonstration of the operability of pumps and valves not covere4 by the Code. If non-Code components are included in the ASME Code IST program (or some other licensee-developed inservice testing program) and certain Code provisions cannot be met, the Commission regulations (10 CFR 50.55a) do not require a
4-80 S2PV-6R3 Rev. 3 March 19, 1992  
            'request for relief' to be submitted to the staff.
 
Nevertheless, documentation that provides assurance. of the continued operability of the non-Code components through the performed tests should be available at the plant site." Non-Code components are components that are important to safety but are not in systems or portions of systems that are classified ASME Class 1, 2 or 3.
COLD SHUTDO~ JUSTIFICATION CSV-28 system Feedwater Valve(s):
* Surry Power Station*has elected to include certain non-Code components in the ASME IST program. Where the Code provisions cannot be met for non-Code components, alternative testing is performed that is adequate to ensure continued operability. The alternate testing is described in this section. There may be other deviations from Code provisions that are not described
2-FW-FCV-2478 2-FW-FCV-2488 2-FW-FCV-2498 Category:
* in this section. For these cases, documentation is available at the plant site.
B Class NC 2-FW-FCV-255A 2-FW-FCV-255B 2-FW-FCV-255C Function:
As indicated in the minutes of public,meeting on Generic Letter 89-04, a 'request for relief' need not be submitted for non-Code components. Therefore, the alternative tests described in this section are not
Main Feedwater Regulating and Regulating Bypass Isolation Valves Cold Shutdown Justification These valves are in positions required to sustain power operation.
            'requests for relief' but are provided for information.
Full stroke exercising the valves would result in a reactor trip.
The procedure of providing alternative testing descriptions instead of requests for relief for non-Code components begins with Revision 3. Requests for relief that were approved by the NRC in Revision 2 for non-Code components will remai~ in place .
The main feedwater regulating valves 2-FW-FCV-2478, 2488 and 2498 move during normal operation as they perform their regulating function.
* S2PV-6R3 4-85 Rev. 3 March 19, 1992
The bypass valves 2-FW-FCV-255A, B and C remain closed during power operation.
* System Valve(s):
These valves will be part stroke exercised every three months and full stroke exercised every cold shutdown.
NON-CODE ALTERNATIVE TESTING VNC-1 Instrument Air 2-IA-381       2-IA-396 2-IA-384      2-IA-947 2-IA-395      2-IA-948 category:  c Class      NC Function:   Bottled Air system Supply/Isolation Section XI Code Requirements Which Cannot Be Met Measure flow to verify full stroke.
4-81 S2PV-6R3 Rev. 3 March 19, 1992  
 
System COLD SHUTDOWN JUSTIFICATION CSV-29 Safety Injection V_alve (s):
2-SI-109 2-SI-130 2-SI-147 Category:
C Class 1
Function:
SI Accumulator Discharge Isolation Check Valve Cold Shutdown Justification These check valves are located inside containment and are back seat tested using the installed sampling system.
To ensure that all of the leakage that could pass by the check valves is collected, the accumulator discharge motor operated valves (2-SI-MOV-2865A, Band C) must be closed.
However, these motor operated valves must be open and de-energized when the reactor coolant system pressure is above 1000 psig according to Technical Specification Paragraph 3.3.A.10.
Therefore, the accumulator check valves will be tested to the closed position every cold shutdown.
4.,..a2 S2PV-6R3 Rev. 3 March 19, 19,92  
 
COLD SHUTDOWN JUSTIFICATION CSV-30 System.
Component Cooling Valve(s):
2-CC-806 category:
C Class 3
Function:
Charging Pump Seal Cooling Surge Tank Makeup Valve Cold Shutdown Justification This valve must open to provide a flow path from the component cooling water system to the charging pump seal water surge tank as a supply of makeup water to the surge tank.* There is no flow instrumentation to verify partial or full flow for the check valve.
There is level instrumentation on the surge tank.
The surge tank can be isolated, dr,ained down and refilled.
However, the surge tank provides the NPSH for the charging pump cooling water pumps and it should not be isolated from the system during normal operation when component cooling.water for the charging pumps is required.
This valve will be tested to the full open position every cold shutdown.
4-83 S2PV-6R3 Rev. 3 March 19, 1992  
 
COLD SHUTDOWN JUSTIFICATION CSV-31 System Component Cooling Valve(s):
2-CC-LCV-201 Category:
B Class 3
Function:
Charging Pump Seal Cooling Surge Tank Level Control Valve Cold Shutdown Justification This valve must open to maintain the level in the charging.pump seal water surge tank and must close to prevent overflowing the surge tank and potentially draining the surge tank through the over flow line.
The valve fails closed on lose of operating air.
Valve position is determine solely from tank level.
In order to manipulate the valve for testing, the surge tank must be isolated.
However, the surge tank providei the NPSH for the charging pump cooling water pumps and it should not be isolated from the system during normal operation when component cooling water for the charging pumps is required.
This valve will be exercise to the open_and closed positions every cold shutdown.
4-84 S2PV-6R3 Rev. 3 March 19, 1992  
 
4.7 ALTERNATIVE TESTING FOR NON-CODE VALVES S2PV-6R3 According to the minutes of public meeting on Gen~-c Letter 89-04, "Paragraph (g) of 10CFR 50.55a requires the use of Section XI of the-ASME Code for inservice testing of components covered by the Code.
For other components important to safety, the licensee also has the burden of demonstrating their continued operability."
The minutes go on to state that, "The Code-required IST program is a reasonable vehicle to provide a periodic demonstration of the operability of pumps and valves not covere4 by the Code.
If non-Code components are included in the ASME Code IST program (or some other licensee-developed inservice testing program) and certain Code provisions cannot be met, the Commission regulations (10 CFR 50.55a) do not require a  
'request for relief' to be submitted to the staff.
Nevertheless, documentation that provides assurance. of the continued operability of the non-Code components through the performed tests should be available at the plant site."
Non-Code components are components that are important to safety but are not in systems or portions of systems that are classified ASME Class 1, 2 or 3.
Surry Power Station*has elected to include certain non-Code components in the ASME IST program.
Where the Code provisions cannot be met for non-Code components, alternative testing is performed that is adequate to ensure continued operability.
The alternate testing is described in this section.
There may be other deviations from Code provisions that are not described
* in this section.
For these cases, documentation is available at the plant site.
As indicated in the minutes of public,meeting on Generic Letter 89-04, a 'request for relief' need not be submitted for non-Code components.
Therefore, the alternative tests described in this section are not  
'requests for relief' but are provided for information.
The procedure of providing alternative testing descriptions instead of requests for relief for non-Code components begins with Revision 3.
Requests for relief that were approved by the NRC in Revision 2 for non-Code components will remai~ in place.
4-85 Rev. 3 March 19, 1992  
 
NON-CODE ALTERNATIVE TESTING VNC-1 System Instrument Air Valve(s):
2-IA-381 2-IA-384 2-IA-395 category:
c Class NC 2-IA-396 2-IA-947 2-IA-948 Function:
Bottled Air system Supply/Isolation Section XI Code Requirements Which Cannot Be Met Measure flow to verify full stroke.
Exercise valves every three months.
Exercise valves every three months.
Basis For Alternate Testing
Basis For Alternate Testing Valves 2-IA-381-, 384 and 947 must close to ensure that bottled air is available to actuate the.main valves (2-RC-PCV~2455C, 2-RC-PCV-2456 1 and 2-MS-SOV-202A and B).
* Valves 2-IA-381-, 384 and 947 must close to ensure that bottled air is available to actuate the.main valves (2-RC-PCV~2455C, 2-RC-PCV-2456 1 and 2-MS-SOV-202A and B). Valves 2-IA-395, 396 and 948. must open to allow bottled air to reach the main valves.
Valves 2-IA-395, 396 and 948. must open to allow bottled air to reach the main valves.
There is no direct means to measure the flow of air through the check valves.
There is no direct means to measure the flow of air through the check valves.
However, after the instrument air system is isolated and the lines vented, the stroke times of the main valves are measured and compared to acceptance criteria. Measuring the stroke times provides indirect eVidence that valves 2-IA-395, 396 and 948 open properly and that valves 2-IA-381, 384 and 947 close properly.
However, after the instrument air system is isolated and the lines vented, the stroke times of the main valves are measured and compared to acceptance criteria.
Measuring the stroke times provides indirect eVidence that valves 2-IA-395, 396 and 948 open properly and that valves 2-IA-381, 384 and 947 close properly.
The performance of this test renders the main valves inoperable; therefore~ the tests cannot be performed during normal operation.
The performance of this test renders the main valves inoperable; therefore~ the tests cannot be performed during normal operation.
After stroking the main valves with the air bottles, the air bottles must be replaced. The safety gained in testing the valves every cold shutdown versus every reactor refueling does not justify the burden of replacing the air bottles on the more frequent basis .
After stroking the main valves with the air bottles, the air bottles must be replaced.
* S2PV-6R3 4-86 Rev. 3 March 19, 1992
The safety gained in testing the valves every cold shutdown versus every reactor refueling does not justify the burden of replacing the air bottles on the more frequent basis.
* NON-CODE ALTERNATIVE TESTING VNC-1 (Cont.)
4-86 S2PV-6R3 Rev. 3 March 19, 1992  
Alternative Testing Valves 2-IA-381, 384 and 947 will be tested closed and valves 2-IA-395, 396 and 948 will be tested open by isolating and venting the instrument air lines, and then stroking the main valves with the bottled air. fhe stroke times of the main valves will be measured and compared to acceptance criteria. This test will be performed every reactor refueling .
 
*
NON-CODE ALTERNATIVE TESTING VNC-1 (Cont.)
* S2PV-6R3 4-87 Rev. 3 March 19, 1992
Alternative Testing Valves 2-IA-381, 384 and 947 will be tested closed and valves 2-IA-395, 396 and 948 will be tested open by isolating and venting the instrument air lines, and then stroking the main valves with the bottled air.
* System Valve(s):
fhe stroke times of the main valves will be measured and compared to acceptance criteria.
NON-CODE ALTERNATIVE TESTING VNC-2 Circulating Water 2-CW-117 Category: B (manual)
This test will be performed every reactor refueling.
Class   : NC Function: Discharge Tunnel Vent Valve Section XI Code Requirements Which Cannot Be Met Exercise valve every three months.
4-87 S2PV-6R3 Rev. 3 March 19, 1992  
Basis For Alternate Testing This valve is located on a line. from the discharge tunnel to the discharge canal. The valve is opened.following*the initiation of an event to reduce the vacuum in the discharge tunnel which reduces the flow rate through the essential heat exchangers. By
 
* reducing the flow rater cooling water in~entory is conserved in the intake canal. Full or partial opening of this valve during normal operation or during cold shutdown will reduce cooling to the component cooling system and the bearing cooling system which will disrupt plant operations.
NON-CODE ALTERNATIVE TESTING VNC-2 System Circulating Water Valve(s):
Alternative Testing This valve will be exercised every reactor refueling .
2-CW-117 Category:
* S2PV-6R3 4-88 Rev. 3 March 19, 1992
B (manual)
* System Valve(s):
Class NC Function:
NON-CODE ALTERNATIVE TESTING VNC-3 Emergency Generator 2-EG-43       2-EG-45 2-EG-44       2-EG-46 Category: B (2-EG-43,44)
Discharge Tunnel Vent Valve Section XI Code Requirements Which Cannot Be Met Exercise valve every three months.
Basis For Alternate Testing This valve is located on a line. from the discharge tunnel to the discharge canal.
The valve is opened.following*the initiation of an event to reduce the vacuum in the discharge tunnel which reduces the flow rate through the essential heat exchangers.
By reducing the flow rater cooling water in~entory is conserved in the intake canal.
Full or partial opening of this valve during normal operation or during cold shutdown will reduce cooling to the component cooling system and the bearing cooling system which will disrupt plant operations.
Alternative Testing This valve will be exercised every reactor refueling.
4-88 S2PV-6R3 Rev. 3 March 19, 1992  
 
NON-CODE ALTERNATIVE TESTING VNC-3 System Emergency Generator Valve(s):
2-EG-43 2-EG-44 Category:
B (2-EG-43,44)
C (2-EG-45,46)
C (2-EG-45,46)
Class   : NC*
Class NC*
Function:   2-EG-43,44 EOG Starting Air/Drive Air Control/Relay Valves 2-EG-45,46 EOG Air start Pressure Equalizing Check Valves Section Xi Code Requirements Which cannot Be Met For valves 2-EG-43,44, measure stroke time.
2-EG-45 2-EG-46 Function:
For valves 2-EG-45,46, measure flow to verify full open
2-EG-43,44 EOG Starting Air/Drive Air Control/Relay Valves 2-EG-45,46 EOG Air start Pressure Equalizing Check Valves Section Xi Code Requirements Which cannot Be Met For valves 2-EG-43,44, measure stroke time.
* Basis For Alternate Testing Valves 2-EG-43 and 44 are air pilot valves that open to supply drive air to the EDG air starting motors. These valves have actuation times considerably under a second and there is no visual reference on the valve to observe the stroke; therefore, the stroke time cannot be measured.
For valves 2-EG-45,46, measure flow to verify full open Basis For Alternate Testing Valves 2-EG-43 and 44 are air pilot valves that open to supply drive air to the EDG air starting motors.
Valves 2-EG-45 and 46 are check valves that close to prevent opening the air start valves before the air motor pinion gears are fully engaged. They open to ensure that the air motor pinions remain engaged (hold-in feature) when the air motors are operating. The only indication of the proper operation of the check valves is the proper operation of the pinion gears. The.
These valves have actuation times considerably under a second and there is no visual reference on the valve to observe the stroke; therefore, the stroke time cannot be measured.
air pilot valves and the check valves work in concert with the air start solenoid valves to start the emergency diesels upon demand within the required time.               *
Valves 2-EG-45 and 46 are check valves that close to prevent opening the air start valves before the air motor pinion gears are fully engaged.
* S2PV-6R3 4-89 Rev. 3 March 19, 1992
They open to ensure that the air motor pinions remain engaged (hold-in feature) when the air motors are operating.
* NON-CODE ALTERNATIVE TESTING VNC-3 (Cont.)
The only indication of the proper operation of the check valves is the proper operation of the pinion gears.
Alternative Testing These valves will be stroke tested quarterly by observing that the valves perform their intended function, which is to start the diesel engines. Adequate performance of the valves will be verified by recording the time it takes for the diesel engines to reach a predetermined RPM and comparing the time to an acceptance criterion.
The.
Also, the failure of these valves to perform will promptly give a diesel engine trouble alarm. Further investigation would identify problems with the operability of these valves .
air pilot valves and the check valves work in concert with the air start solenoid valves to start the emergency diesels upon demand within the required time.
*
4-89 S2PV-6R3 Rev. 3 March 19, 1992  
* S2PV-6R3 4-90 Rev. 3 March 19, 1992
 
* 5.0 REPORTING OF INSERVICE TEST RESULTS 5.1 PUMP INSERVICE PROGRAM Records of Pump Inservice Tes*t Results will be in accordance with the intent of Article IWP~6000. Files will be established for each pump and will include:
NON-CODE ALTERNATIVE TESTING VNC-3 (Cont.)
: 1) Pump identification by equipment number, manufacturer and serial number.
Alternative Testing These valves will be stroke tested quarterly by observing that the valves perform their intended function, which is to start the diesel engines.
: 2) The record of test shall include:
Adequate performance of the valves will be verified by recording the time it takes for the diesel engines to reach a predetermined RPM and comparing the time to an acceptance criterion.
a)   date of test, b)   measured and observed quantities, c)   identification of instruments used, d)   comparison with allowable ranges of test valves and analysis of deviations, e)   requirements for corrective actions, and f)   conducting and analyzing the test
Also, the failure of these valves to perform will promptly give a diesel engine trouble alarm.
: 3) Inservice test plans. ~his may be by surveillance test procedure by which the pump is tested with reference drawing.
Further investigation would identify problems with the operability of these valves.
* 4) summaries of corrective action some by maintenance report_ number, etc.
4-90 S2PV-6R3 Rev. 3 March 19, 1992  
The Pump Inservice Test Program, associated surveillance test procedures and results will be kept at Surry Power Station. They will be available for audit by the Authorized Nuclear Inservice Inspector and
 
          *the NRC.
5.0 REPORTING OF INSERVICE TEST RESULTS 5.1 PUMP INSERVICE PROGRAM Records of Pump Inservice Tes*t Results will be in accordance with the intent of Article IWP~6000.
5.2 VALVE INSERVICE PROGRAM Records of Valve Inservice Test Results will be in accordance with the intent of Article IWV-6000, files will be established for each valve and will include:
Files will be established for each pump and will include:
: 1) Valve identification by equipment number, manufacturer, size, valve type, actuator type.
: 1)
: 2) The record of test*shall include:
Pump identification by equipment number, manufacturer and serial number.
a)   date of test, b)   measured and observes quantities where applicable, c)   identification of instruments used where
: 2)
* applicable, 4-91 S2PV-6R3                                             Rev. 3
The record of test shall include:
                                '                    March 19, 1992
a) date of test, b) measured and observed quantities, c) identification of instruments used, d) comparison with allowable ranges of test valves and analysis of deviations, e) requirements for corrective actions, and f) conducting and analyzing the test
: 3)
Inservice test plans.  
~his may be by surveillance test procedure by which the pump is tested with reference drawing.
: 4) summaries of corrective action some by maintenance report_ number, etc.
The Pump Inservice Test Program, associated surveillance test procedures and results will be kept at Surry Power Station.
They will be available for audit by the Authorized Nuclear Inservice Inspector and  
*the NRC.
5.2 VALVE INSERVICE PROGRAM S2PV-6R3 Records of Valve Inservice Test Results will be in accordance with the intent of Article IWV-6000, files will be established for each valve and will include:
: 1)
Valve identification by equipment number, manufacturer, size, valve type, actuator type.
: 2)
The record of test*shall include:
a) date of test, b) measured and observes quantities where applicable, c) identification of instruments used where applicable, 4-91 Rev. 3 March 19, 1992
 
S2PV-6R3  
.d) comparisons with allowable ranges of test valves and analysis of deviations, e) maintenance history, and f) signature of the person or persons responsible for conducting and analyzing the test.
: 3) summaries of maintenance history may be maintenance report numbers, etc.
The Valve Inservice Test Program, associated surveillance test procedures and results will be kept at Surry Power station.
They will be available for audit by the Authorized Nuclear*
Inservice Inspector and the NRC.
4-92 Rev. 3.
March 19, 1992  


*            .d) e)
6.0 QUALITY ASSURANCE PROGRAM The Pump and Valve Inservice Test Program activities will be conducted in accordance with the Nuclear Operat~ons Department Standards Manual and Technical Specifications for Surry Power Station.
f) comparisons with allowable ranges of test valves and analysis of deviations, maintenance history, and signature of the person or persons responsible for conducting and analyzing the test.
4-93 S2PV-6R3 Rev. 3 March 19, 1992}}
: 3)  summaries of maintenance history may be maintenance report numbers, etc.
The Valve Inservice Test Program, associated surveillance test procedures and results will be kept at Surry Power station. They will be available for audit by the Authorized Nuclear*
Inservice Inspector and the NRC.    *
*
* S2PV-6R3 4-92 Rev. 3.
March 19, 1992
* 6.0 QUALITY ASSURANCE PROGRAM The Pump and Valve Inservice Test Program activities will be conducted in accordance with the Nuclear Operat~ons Department Standards Manual and Technical Specifications for Surry Power Station .
*
* S2PV-6R3 4-93 Rev. 3 March 19, 1992}}

Latest revision as of 20:04, 5 January 2025

Rev 3 to Surry Power Station,Unit 2 Inservice Testing Program Plan for Pumps & Valves,Second Insp Interval 821222-921222
ML18151A371
Person / Time
Site: Surry  
Issue date: 03/19/1992
From:
VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.)
To:
Shared Package
ML18151A309 List:
References
PROC-920319, NUDOCS 9208040072
Download: ML18151A371 (192)
v • d • e


Text

VIRGINIA ELECTRIC AND POWER COMPANY SURRY POWER STATION UNIT 2 INSERVICE TESTING PROGRAM PLAN FOR PUMPS AND VALVES SECOND INSPECTION INTERVAL MAY 1, 1983 -

MAY 1, 1993 REVISION 3 ADDRESSES:

VIRGINIA ELECTRIC AND POWER COMPANY P. 0. BOX 26666 RICHMOND, VIRGINIA 23261 SURRY POWER STATION P. 0. BOX 315 SURRY, VIRGINIA 23883 S2PV-iR3 Rev. 3

l.

9208040072 9207.24- -------- -,

~DR ADOCK 050002SO

'l.lli PDR March 19, 1992

TABLE OF CONTENTS INSERVICE TESTING PROGRAM PLAN FOR PUMPS AND VALVES i.O INTRODUCTION 2.0 PROGRAM DESCRIPTION 3.0 PUMP INSERVICE TEST PROGRAM DESCRIPTION 3.1

3. 2.

3.3 3.4 3.5 3.6 3.7 Program Development Philosophy Program Implementation Program Administration Pump Reference List Pump Inservice Test Tables Pump Test Program Relief Request Alternative Testing for Non-Code Pumps 4.0 VALVE INSERVICE TEST PROGRAM DESCRIPTION Program Development Philosophy Program Implementation Program Administration Valve Inservice Test Table Valve Test Pr*ogram Relief Request 4.1 4.2 4.3 4.4 4.5 4.6 4.7 Valve Test Program Cold Shutdown Justification Alternative Testing for Non-Code Valves 5.0 REPORTING OF INSERVICE TEST RESULTS 5.1 Pump Inservice Program 5.2 Valve Inservice Program 6.0 QUALITY ASSURANCE PROGRAM ii S2PV-1R3 Rev. 3 March 19, 1992

INSERVICE TESTING PROGRAM FOR PUMPS AND VALVES

1.0 INTRODUCTION

This Pump and Valve Inservice Test Program Plan is applicable to the Surry Power Station Unit 2 which began commercial operation on May 1, 1973.

This program plan is comprised of two independent subprograms - the Pump Inservice Test Program and the Valve Inservice Test Program.

The development, implementation and administration of these two programs are detailed in subsequent sections.

Surry Power Station received a Safety Evaluation Report (SER) for the IST Program in August of 1990.

Certain program anomalies were identified in the SER. *Surry Power Station submitted updates to Revision 2 of the IST Program on November 28 and 30, 1990 in part to correct these anomalies.

The updates are included in this program revision.

1-1 S2PV-1R3 Rev. 3 March 19, 1992

2.0 PROGRAM DESCRIPTION This Inservice Testing Program for ISI Class 1, 2, 3 and NC pumps and valves meets the requirements of Subsections IWP and IWV of Section XI of the ASME Boiler and Pressure Vessel Code, 1980 Edition through the Winter 1980 Addendum.

Where these requirements are determined to be impractical, specific requests for relief have been written and included in the program plan attached

3.0 PUMP INSERVICE TEST PROGRAM DESCRIPTION 3.1 PROGRAM DEVELOPMENT PHILOSOPHY 3.2 S2PV-1R3 Highly reliable safety-grade equipment is a vital consideration in the operation of a nuclear generating station.

To help assure operability, the,surry Power Station Unit 2 Pump Inservice Test Program has been developed.

The Program is designed to detect and evaluate significant hydraulic or mechanical changes in the operating parameters of vital pumps and to initiate corrective action when necessary.

The Program is based on the requirements of the ASME Boiler and Pressure Vessel Code (B&PV),Section XI, Subsection IWP.

To the maximum extent practical, the Program complies with the specifications of ASME B&PV Code,Section XI, Subsection IWP, 1980 Edition with Addendum through Winter.of 1980; 10CFR50.55a(g); and NRC Staff guidelines for complying with certain provisions of 10CFR50.55a(g) "Inservice Inspection Requirements."

The Nuclear Regulatory Commission and Code Committee recognized that design differences among plants may render impractical certain Code requirements.

Where such impracticalities exist, they have been substantiated as exceptions as allowed by the Code.

. Alternate testing requirements have been proposed when warranted.

PROGRAM IMPLEMENTATION Surveillance testing is performed to detect equipment malfunction or degradation and to initiate corrective action.

Since the safeguards pumps are normally in standby mode, periodic testing of this equipment is especially important.

The Surry Power Station Unit*2 Inservice Test Program provides a schedule for testing safety-grade pumps and will be implemented as part of normal periodic surveillance testing.

R~ference data will be gathered during initial surveillance tests.

In most cases, test parameters

_will be measured with normal plant instrumentation.

This approach will simplify the.test program and will promote timely completion of periodic surveillance testing.

When permanently installed instrumentation is not available, portable instrumentation will be used to record the required parameters.

3-1 Rev. 3 March 19, 1992

S2PV-1R3 During subsequent surveillance tests, flow rate will normally be selected as the independent test parameter and will be set up* to match the reference flow rate.

Other hydraulic and mechanical performance parameters will be measured and evaluated against the appropriate reference values.

The resuits of such evaluations will determine whether or not corrective action is warranted.

Each pµmp in the Pump Inservice Test Program will be tested according to a detailed test procedure.

The procedure* will include, as minimum:.

1)

References:

This section will identify references applicable to Technical Specifications and other necessary material as drawings.

2)

Purpos*e:

This section will identify test objectives.

3)

Initial Conditions:

Each procedure should identify those independent actions or procedures which shall be completed and station conditions which shall exist prior to use.

4)

Precautions:

Precautions should be established to alert the individual performing the task to those situations in which important measures should be taken early or where extreme care should be used to protect equipment and personnel.

Cautionary notes applicable to specific steps in the procedure should be included in the main body of the procedure as appropriate and should be identified as such.

5)

Instructions:

The main body*of a procedure should contain step by step instructions in the degree of detail necessary for performing a required test.

6)

Acceptance Criteria:* The ranges within which test data will be considered acceptable will be established and included in the test procedure.

In the event that data fall outside the acceptable range, operator action will be governed by approved station procedures~

Finally, it is recognized that the Pump Inservice Test Program sets forth minimum testing requirements.

Additional testing will be performed, as required, after pump maintenance or as determined necessary by personnel at Surry Power Station.

3-2 Rev. 3 March 19, 1992

3.3 PROGRAM ADMINISTRATION The operations and engineering staffs at Surry Power station are responsible for administration and execution of the Pump Inservice Test Program.

The Program was officially implemented on May 1, 1983 and will govern pump testing for a 120 month period.

Prior to the end of the 120 month period, the Program will be r~viewed and upgraded to assure continued compliance with 10CFR50.55a(g) (4).

The Program will be updated a minimum*of at least once every 40 ~onths for new*

systems, relief request, etc.

3.4 PUMP REFERENCE LIST S2PV-1R3 This list gives a brief description of*each pump identified in the. Pump Inservice Test Program.

The pump's ASME Code Classifications are specified in "PUMP INSERVICE TEST TABLES".

2-CH-P-lA 2-CH-P-1B 2-CH-P-1C High Head Safety Injection or Charging Pumps provide high pressure flow for the Safety Injection System and during normal operation, maintain pressurizer level and seal water injection to the Reactor Coolant Pumps.

See drawing 11548-CBM-SSB, Sheet 2.

2-SI-P-lA 2-SI-P-lB Low Head Safety Injection Pumps provides low pressure safety injection to the core for long term cooling and as a backup to accumulators.

See drawing 11548-CBM-89A, Sheet 1.

2-CS-P-lA 2-CS-P-lB Containment Spray Pumps provide a cooled, chemically treated, borated spray to reduce containment pressure following a loss of coolant accident.

See drawing 11548-CBM-84A, Sheet 2

  • 3-3 Rev. 3 March 19, 1992

S2PV-1R3 2-RS-P-2A 2-RS-P-2B Outside Recirculation Spray Pumps aid the Containment Spray System in reducing containment pressure rapidly following a loss of coolant accident.

See drawing 11548-CBM-84B, Sheet 2.

2-RS-P-1A 2-RS-P-1B Inside Recirculation Spray Pumps aid the containment spray system in reducing containment pressure rapidly following a loss of coolant accident.

See drawing 11548-CBM-84B, Sheet 1.

2-FW-P-3A 2-FW-P-3B 2-FW-P-2 Auxiliary Feedwater Pumps supply the steam generator with feedwater in the event of a complete loss of n_ormal feedwater.

See drawing 11548-CBM-GBA, Sheet 3.

2-RH-P-1A 2-RH-P-1B The function of Residual Heat Removal Pumps is to remove heat energy from the core when the Reactor Coolant System is below 3so°F.

See drawing 11548-CBM-87A, Sheet 1.

1-CC-P-lC 1-CC-P-lD Component Cooling Water Pumps are used to supply water to remove heat from the Residual Heat Removal System.

See drawing 11448~CBM-72D, Sheet 1.

1-CH-P-2C 1-CH-P-2D Boric Acid Transfer Pumps supply boric acid to suction of charging pumps via normal coolant boron concentration and emergency makeup.

See drawing 11448-CBM-BSA, Sheet 1.

3-4 Rev. 3 March 19, 1992

S2PV-1R3 2-CC-P-2A 2-CC-P-2B Charging Pump Cooling Water Pumps provide water to transfer heat from the charging pump mechanical seals.

See drawing 11548-CBM-71B, Sheet 2.

2-SW-P-10A 2-SW-P-10B Charging Pump Service Water Pumps provide cooling water for Charging Pump Cooling Water Systems.

See drawing 11548-CBM-71B, Sheet 1.

1-EE-P-1B 1-EE-P-lC 1-EE-P-1E Fuel Oil Pumps supply fuel oil to emergency diesel generators wall mounted tank.

See drawing 11448-CBB-JSA, Sheet 2

  • 3-5 Rev. ~3 March 19, 1992

3.5 PUMP INSERVICE TEST TABLES S2PV-1R3 This tabulation identifies the pumps to be tested, code classes, required test quantities and frequencies.

Relief from test requirements is reguested in cases where test requirements have been determined to be impractical.

Where relief is requested, technical justification is provided along with alternative test methods when applicable.

For non-Code pumps, a request for relief is not necessary when provisions of the Code cannot be met.

Section 3.7 contains a discussion of the testing requirements for non-Code pumps and descriptions of alternative testing in cases where the provisions of the Code cannot be met.

To aid the reader in interpreting the Pump Inservice Test Table, brief explanations of the table headings and abbreviations are provided below.

1)

Pump Number - Each pump in the plant has a unique "tag" number which identifies the system to which the pump belongs.

2)

Code Class -

ASME Code Class of each pump as per 10CFR50.55a and Regulatory Guide 1.26.

Note:

NC is for non-Code pumps.

These pumps are important to safety but are not in systems that are classified ASME Class 1, 2 or 3.

'3)

System Resist - Either FIX for a test loop with a fixed system resistance or VAR for a test loop with a system resistance that can be varied.

4)

The required Section XI test quantities of Inlet Pressure, Differential Pressure (Discharge Pressure is not a required test quantity but is listed for clarity), Flow Rate, Vibration, Bearing Temperature, Pump Speed and.Lubrication Level/Pressure are given as column headings.

The following abbreviations are used to describe the test status:

Q - the test will be performed on a quarterly basis CSD - the test will be performed every cold shutdown.

A relief request explains the need for*

deviating from Section XI test frequency requirements 3-6 Rev. 3 March 19, 1992

S2PV-1R3 NA - the test is not applicable, see corresponding relief request RR - the test will be performed every reactor refueling.

A relief request explains the need for deviating from Section XI test frequency requirements.

  • 2Y - the test will be performed every 24 months Under pump speed, NA applies to constant speed pumps which do not require the measurement of speed.

Therefore, no relief is necessary.

Under Lubrication Level/Pressure, NA applies to pumps that have a lubrication system with no level or pressure indication.

No relief is necessary.

3-7 Rev. 3 March 19, 1992

PUMP IN SERVICE TEST TABLE Pump ASME System Inlet Disch Diff Flow Bearing Pump Lubrication Relief

!dent.

Class Resist Press Press Press Rate Vibration Temperature Speed Level/Pressure Request 2-CH-P-lA 2

VAR 0

0 0

0 0

NA NA 0

1 2-CH-P-*lB 2

VAR 0

0 0

0 0

NA NA 0

1 2-CH-P-lC 2

VAR 0

0 0

0 0

NA NA 0

1 2-SI-P-lA 2

FIX 0

0 0

0 0

NA NA NA 1

2-SI-P-*lB 2

FIX 0

0 0

0 0

NA NA NA 1

2-CS-P-lA 2

FIX 0

Q Q

0 0

NA NA Q

1 2-CS-P-lB 2

FIX 0

0 0

0 0

NA NA 0

1 2-RS-P-2A 2

FIX 2Y 2Y 2Y 2Y 2Y NA

. NA NA 1,4 2-RS-P-2B 2

FIX 2Y 2Y 2Y 2Y 2Y NA NA NA 1,4 2-RS-P-lA 2

VAR RR RR RR RR RR NA NA NA 1,5,15 2-RS-P-lB 2

VAR RR RR RR RR RR NA NA NA 1, 5, 15 2-FW-P-JA 3

VAR 0

0 0

0 0

NA NA 0

1 2-FW-P-JB 3

VAR 0

0 0

0 0

NA NA 0

1 2-FW-P-2 3

VAR 0

0 0

0 0

NA 0

'Q 1

2-RH-P-lA 2

VAR CSD CSD CSD CSD CSD NA NA NA 1.7,15 2-RH-P-lB 2

VAR CSD CSD CSD CSD CSD NA NA NA 1.7,15 1-CC-P-lC 3

VAR 0

0 0

0 0

NA NA 0

1.16 1-CC-P-lD 3

VAR 0

0 0

0 0

NA.

NA 0

1.16 3-8 S2PV-2R3 Rev. 3 May 18, 1992

PUMP INSERVICE TEST TABLE Pump ASME System Inlet Disch Diff Flow Bearing Pump Lubrication Relief

!dent.

Class Resist Press Press Press Rate Vibration Temperature Speed Level/Pressure Request 1-CH-P-2C 2

VAR Q

Q Q

Q Q

NA NA NA 1.18 1-CH-P-2D 2

VAR Q

Q Q

Q Q

NA NA NA 1.18 2-CC-P-2A 3

VAR Q

Q Q

Q Q

NA NA NA 1

2-CC-P-2B 3

VAR Q

Q Q

Q Q

NA NA NA 1

2-SW-P-lOA 3

VAR Q

Q 0

0 0

NA NA NA 1

2-SW-P-lOB 3

VAR Q

0 Q

Q 0

NA NA NA 1

1-EE-P-lB NC FIX NA Q

NA 0

Q NA NA NA 1,PNC-1 1-EE-P-lC NC FIX NA 0

NA Q

0 NA NA NA 1,PNC-1 1-EE-P-lE NC FIX NA Q

NA 0

Q NA NA NA 1,PNC-1 Note:

PNC-1 is not a request for relief but a description of alternative testing for non-Code pumps.

Refer to Section 3. 7.

3-9 S2PV-2R3 Rev. 3 May 1, 1992

3.6 PUMP TEST PROGRAM RELIEF REQUEST S2PV-4R3 Relief Requests identify code requirements which are impractical for Surry Unit 2 and provide justification for the requested exception.

Where appropriate, alternate testing to be performed in lieu of the code requirements is proposed.

3-10 Rev. 3 March 19, 1992

RELIEF REQUEST P-0 Relief Request Withdrawn 3-11 S2PV-4R3 Rev. 3 March 19, 1992

RELIEF REQUEST P-1 systems:

Various Pump(s):

IWP Progra.m Pumps.

See PUMP INSERVICE TEST TABLE.

ClassSection XI Code Requirements For Which Relief Is Requested Measure pump bearing temperatures and vibration in mils.

Basis For Request Pump vibration and bearing temperature measurements are used to detect changes in the mechanical characteristics -of a pump.

Regular testing. should detect developing problems, thus repairs can be initiated prior to a pump becoming inoperable.

The ASME Section XI minimum standards require measurements of the vibration amplitude displacement in mils every three months and bearing temperatures once per year.

Our proposed program is based on vibration readings in velocity units rather than-vibration amplitude in mils displacement.

This technique is an industry accepted method which is more sensitive to small changes that are indicative of developing mechanical problems and hence more meaningful.

Velocity measurements detect not only high amplitude vibrations that indicate a major mechanical problem, but also the equally harmful low amplitude high frequency vibrations due to misalignment in balance, or bearing wear that usually go undetected by simple displacement measurements.

In addition, these readings go far beyond the capabilities of a bearing temperature monitoring program.

A bearing will be seriously degraded piior to the detection of increased heat at the bearing housing.

Quarterly vibration velocity readings should achieve a much higher probability of detecting developing problems than the once per year reading of bearing temperatures.

Bearing temperature tests present problems which include the following:

1.

Certain systems have no recirculation test loops and a limited source of water.

An enforced thirty minute run time would deplete the source.

3-12 S2PV-4R3 Rev. 3 March 19, 1992

2.

RELIEF REQUEST P-1 (Cont.)

The lubrication fluid for some pumps is taken from the~*

process water, which can change te~perature depending on ambient conditions.

Data trending for these cases is not meaningful.

Therefore, the detection of possible bearing failure by a yearly temperature measurement is extremely unlikely.

The small probability of detection of a bearing failure by temperature measurement does not justify the additional pump operating time required to obtain the measurements.

In addition, it is impractical to measure bearing temperatures on many pumps.

Alternate Testing Proposed Pump vibration measurements will be taken in vibration velocity (in/sec).

The evaluation of the readings will be per the attached table.

The ranges of Test parameters given in the attached table were taken from ANSI/ASME OM (Part 6), An American National Standard In-Service Testing of Pumps.

3-13 S2PV-4R3 Rev. 3 March 19, 1992

RELIEF REQUEST P-1 (cont.)

RANGES OF TEST PARAMETERS (1)

PUMP PUMP TEST ACCEPTABLE ALERT REQUIRED.

TYPE SPEED PARAMETER RANGE RANGE ACTION RANGE Centrifugal

-<600 rpm Va 52.5 Vr

>2.5Vr to 6Vr

>6 Vr And Vertical Line Shaft but not >10.5 mils but not >22 mils

~600 rpm Vv 52.5 V (2) r

>2.5 Vr to 6Vr

>6 Vr but not >0.325 in/sec but not >0.70 in/sec Reciprocating

_>2.5 Vr to 6Vr

>6 Vr Note:

(1)

Vr is the vibration reference value in the selected units Vd is vibration displacement measured peak-to-peak, unfiltered Vv is vibration velocity measured peak, unfiltered (2)

Small-values for Vr will produce small acceptable ranges for pump operation.

Based on a small acceptable range, an adequately anq smoothly running pump.could be subject

To avoid this situation, a minimum value for Vr of 0.05 in/sec has been established for velocity measurements.

Pumps with a measured reference value below 0.05 in/sec shall have subsequent test results compared to an acceptable range based on 0.05 in/sec *.

Use of a minimum value for Vr is allowed for a three year period which ends in August, 1993.

This interim period.is discussed in the Surry Safety Evaluation Report received in August of 1990 (Serial No~.90-546).

3-14 Rev. 3 March 19, 1992

RELIEF REQUEST P-2 Relief Request Withdrawn RELIEF REQUEST P-3 Relief Request Withdrawn 3-15 S2PV-4R3 Rev. 3 March 19, 1992

System:

Pump(s):

Class RELIEF REQUEST P-4 Recirculation Spray 2-RS-P-2A 2-RS-P-2B 2

Section XI Code Requirements For Which Relief Is Requested

1. An inservice test shall be run on each pump nominally every 3 months during normal plant operation.
2. Each pump shall be run at least five minutes under conditions as stable as the system permits prior to measuring the test quantities.
3. Measure inlet pressure and differential pressure.

Basis For Request

1. The outside recirculation pumps take suction from the containment sump and discharge to the containment spray arrays.

To test these deep draft pumps, the pump pit and the recirculation test loop must be filled with primary grade water and vented.

The filling and venting process takes approximately 3 hours3.472222e-5 days <br />8.333333e-4 hours <br />4.960317e-6 weeks <br />1.1415e-6 months <br />.

After the test is completed, the pump pit and recirculation piping must be slowly drained to avoid floodi~g the basement.

Testing is the only source of operational based degradation for the pumps.

During normal operation, the outside recirculation spray system lacks fluid inventory except for some primary grade water trapped in the bottom of the pump pit.

The portions of the pump exposed to this standing water are made of stainless steel and not subject to corrosion.

Considering the complexity of testing these pumps described above, the exposure to degradation caused by frequent testing and the lack fluid inventory during normal operation, there is no compensating increase in safety achieved by testing these pumps every three months.

This position is supported by ANSI/ASME OM (Part 6), An American Standard In-Service Testing of Pumps, Paragraph 5.5, which states, "Pumps lacking required fluid inventory, (e.g.,

pumps in dry sumps) need not be tested in accordance with this Part every 3 months.

These pumps shall be tested at least once every 2 years except as provided in para. 5.4.

The required fluid* inventory shall be provided during this test."

3-16 S2PV-4R3 Rev. 3 March 19, 1992

RELIEF REQUEST P-4 (Cont.)

Paragraph 5.4 discribes the testing frequency of pumps in systems which are declared inoperable or not required for service.

2. The test loop for these pumps contains a small volume of water.

A four inch test recirculation line branches off the ten inch pump discharge line a short distance from the pump.

The recirculation line discharges into the pump pit which is a cylinder approximately 50 feet deep and two feet in diameter.

Because of the small volume in the test loop, the hydraulic parameters stabilize quickly.

Therefore, a five minute stabilization period is not necessary to achieve repeatable test results.

In addition, if the pump is run for too long of a period, the water will heatup due to the limited water volume.

This heatup can lead to excessive pressures in the test loop.*

3. Inlet pressure instrumentation is not installed. *However, the outside recirculation spray pumps obtain flow through a suction bell immersed in the pump casing.

During testing, a casing level is established by filling the casing with PG water to provide NPSH to the pump.

Flow is recirculated through the pump, recirculation line, and back to the casing.

By establishing a casing level and maintaining it constant for the tests, any variation in pump differential pressure would be directly indicated by monitoring pump discharge pressure.

The static inlet pressure will be calculated and subtracted from t~e discharge pressure to yield a differential pressure.

Alternate Testing Proposed These pumps will be flow tested on their recirculation paths at least once every two years.

Maintaining a constant pump casing water level from test to test by filling the casing with PG water will yield the same suction pressure for each-test.

The static inlet pressure will be calculated and subtracted from the discharge pressure to yield a differential pressure.

After a two minute stabilization period, static inlet pressure, differential pressure as determined from the calculated static inlet pressure and measured discharge pressure, flow rate and vibration measurements will be taken.

3-17 S2PV'-4R3 Rev. 3 March 19, 1992

System:

Pump(s):

Class RELIEF REQUEST P-5 Recirculation Spray 2-RS-P-lA 2-RS-P-lB 2

Section XI Code Requirements For Which Relief Is Requested Measure test quantities every quarter.

Measure inlet pressure and differential pressure.

Basis For Request These pumps are located inside containment, therefore, flow testing cannot be performed during plant operation.

Flow testing of these pumps requires the installation of a temporary recirculation line and the erection of a temporary dike to contain the recirculated water.

Approximately five to six days are needed to set up, perform the test, and return the system to its normal configuration.

Testing on a cold shutdown fr~quency would not allow enough time to plan for and perform a five to six day flow test.

Because these pumps are designed to take suction from a *sump, measurement of inlet pressure is not practical.

Also, the sump level canriot vary more than one foot during testing because of the limitations in the test dike design and the requirements for NPSH.

Therefore, inlet pressure will be calculated from sump level.

Alternate Testing Proposed These pumps will be bump tested to verify operability every quarter.

Each pump-is equipped with a sensor to detect pump rotation which alarms in the control room.

This alarm will be observed during each pump test.

A flow test which includes vibration measurement will be performed every reactor refueling.

Differential pressure will be determined from the measured-discharged pressure and the calculated inlet pressure.

3-18 S2PV-4R3 Rev. 3 March 19, 1992

RELIEF REQUEST P-6 Relief Request Withdrawn 3-19 S2PV-4R3 Rev. 3 March 19, 1992

RELIEF REQUEST P-7 System:

Residual Heat Removal Pump(s):

Class 2-RH-P-lA 2-RH-P-lB 2

.Section XI Code Requirements For Which Relief Is Requested Frequency.of Pump Test.

Measure inlet pressure.

Basis For Request The low pressure RHR pumps take suction from and discharge to the reactor coolant system which operates at 2235 psig.

This is well above the operating pressure for the RHR pumps.

Therefore, testing.during normal operation is not possible.

The use of permanent inlet and discharge pressure* instrumentation for determining differential pressure is not feasible because the inlet pressure can vary between 20 and 200 psig depending upon plant conditions.

Therefore, ranges for the inlet and discharge pressure gauges must vary from test to test.

The current method is to install temporary inlet and discharge gauges.

Properly matching the ranges of the temporary instrumentation to existing plant con~itions has proved to be difficult.

To eliminate this difficulty, differential pressure gauges will be installed during the next refueling outage., With the installation of the differential pressure gauges, the measurement of inlet pressure will no longer be necessary to trend pump performance.

The new ASME Code for pump testing, Section IST, Subsection ISTB, Inservice Testing of Pumps in Light-Water Reactor Power Plants, does not require the measurement of inlet pressure if differential pressure gauges are used

RELIEF REQUEST P-7 (Cont.)

Also, the installation of the temporary gauges result in a high dose (approximately 70 to 100 mrem per gauge).

Because measurement of inlet pressure presents a hardship in terms of dose and does not add meaningful information for trending pump performance, inlet pressure will not be measured after the installation of the differential pressure gauges.

Alternate Testing Proposed Pumps will be tested each cold shutdown (but not more frequently than every three months).

Differential pressure will be measured directly after the installation of the differential pressure gauges during the next refueling outage (first quarter, 1993).

At this time, inlet pressure will no longer be measur~d.

3-21 S2PV-4R3 Rev. 3 March 19, 1992

S2PV-4R3 RELIEF REQUEST P-8 Relief Request Withdrawn RELIEF REQUEST P-9 Relief Request Withdrawn RELIEF REQUEST P-10 Relief Request Withdrawn RELIEF REQUEST P-11 Relief Request Withdrawn RELIEF REQUEST P-12 Relief Request Withdrawn RELIEF REQUEST P-13 Relief Request Withdrawn RELIEF REQUEST P-14 Relief Request Withdrawn 3-22 Rev. 3 March 19, 1992

system:

INTERIM RELIEF REQUEST P-15 Residual Heat Removal Inside Recirculation Spray Pump(s):

2-RH-P-lA 2-RH-P-lB 2-RS-P-lB 2-RS-P-lA Class 2

Section XI Code Requirements For Which Interim Relief Is Requested Measure Flow Rate Within an Accuracy of+ 2 Percent.

Basis For Request On May 30, 1991, personnel at Surry Power station determined that flow instrumentation used for testing pumps in the Surry Units 1 and 2 ASME Section XI Inservice Testing Programs may have flow instrument loop accuracies that are not within+ 2 % as required by the Code because certain calibration requirements may not have been met prior to using the instruments.

An evaluation* was performed to determine if the decreased instrument accuracies affected the operable status of the pumps.

The last measured flow rates for the affected pumps were adjusted to compensate for the uncertainty in the decreased instrument accuracies.

The adjustment factor (FA) in gpm was determined as follows:

FA= FS*(CSA -

2) where FS = the full range of the instrument in gpm CSA= the revised loop accuracy in percent For test procedures that compare the measured flow to the ASME acceptance range, the adjustment factor was subtracted from the last measured flow rate.

The adjusted flow rate was then compared to the acceptance criteria

INTERIM RELIEF REQUEST P-15 (Cont.)

For test procedures that set flow to a reference value and then measure differential pressure, the pump curve must be used to determine the adjusted differential pressure.

In these cases, FA was added to the recorded reference flow rate which results in an adjusted differential pressure as determined from the pump curve that is lower than the original test value.

The adjusted differential pressure was then compared to the acceptance criteria.

The evaluation showed that the Section XI pumps have adequate operational margin after the affects of the decreased instrument accuracies were factored into the comparison of test results to the Section XI acceptance criteria.

Alternate Testing Proposed Pumps 2-RH-P-1A and Bare tested every cold shutdown.

For thesa pumps, the necessary instrument calibrations will be performed by the first required (cold shutdown) test after September 30, 1991 to ensure that the flow instrument accuracies are within+ 2.0 %.

The flow transmitters for these pumps are located inside containment, which is a subatmospheric design, and are inaccessible during normal operation

  • Pumps 2-RS-P-1A and Bare tested every reactor refueling per relief request P-5.

For these pumps, the necessary instrument calibrations will be performed with accuracies within+ 2.0 % and the pumps retested during the next scheduled refueling outage when a temporary dike can be installed in containment to support the pump testing

. RELIEF REQUEST P-16 System:

Component Cooling Pump(s):

1-CC-P-lC 1-CC-P-lD Class 3

Section XI Code. Requirements For Which Relief Is Requested ASME Section XI, Subarticle IWP-3110 requires reference values to be one or more fixed set of measured values.

All subsequent test results shall be compared to these reference values.

Basis For Request During testing of the component cooling.water pumps, flow is adjusted to the reference flow rate using an 18 inch butterfly valve.

The butterfly valve is a crude throttling device and does not provide the fine tuning that is required to duplicate the reference flow rate from test to test.

Consequently, throttling to the same reference flow rate during each test is not practical.

Alternate Testing Proposed Two reference *points of flow versus differential pressure will be established from the reference test for each pump.

A straight line approximation will be used to determine differential pressure reference points as a function of flow between the two test points.

By keeping the difference between two test points small, the straight line is a good approximation of the pump curve within the two test points.

During the subsequent tests, test flow will be throttled as close as practic_al to the reference flow value.

The test flow must fall between the two reference points used to establish the straight line approximation.

The test flow and the corresponding differential pressure will be compared to either graphical and/or tabular acceptance criteria based on the straight line approximation of the reference pump curve based on the straight line approximation of the reference pump curve.

3-25 S2PV-4R3 Rev. 3 March 19, 1992

RELIEF REQUEST P-16 (Cont.)

For example, given the straight line equation determined from the two.reference points for flow and differential pressure:

Prdif f = a + b*Q where

  • Prdiff = the reference differential pressure based on the test value for flow (Q) recorded during subsequent tests and, a and bare constants, the acceptance criteria for the flow (Q) would be as follows:

Upper Upper Lower Lower Required.Action= l.03*Prdiff Alert

= 1.02*Prdiff Alert

= 0.93*Prdiff Required Action= 0.90*Prdiff The multipliers on Prdiff are taken from Table IWP-3100-2 in Section XI.

The actual recorded differential pressure (Padiff) will then be compared to the acceptance criteria determined from Prdiff*

Also, the tests results can be trended from test to test by normalizing Padiff to Prdiff*

For acceptable operation, the ratio of Padiff/Prdiff must fall between 0.93 and 1.02.

A decrease in the ratio from test t6 test would indicate a steady.

degradation in.pump performance.*

3-26 S2PV-4R3 Rev. 3 March 19, 1992

RELIEF REQUEST P-17 System:

Various Pump(s):

IWP Program Pumps.

See PUMP INSERVICE TEST TABLE.

ClassSection XI Code Requirements For Which Relief Is Requested Pump inlet pressure shall be measured before starting a pump and during the test (Table IWP-3100-1)

Basi~ For Request If the pump being tested is in operation as a result of plant or system needs, it is unreasonable to reconfigure system lineups just to provide for the measurement of static inlet pressure.

Inlet pressure prior to pump startup is not a significant*

parameter needed for evaluating pump performance or condition.

Alternate Testing Proposed When performing a test on a pump that is already in operation, inlet pressure will only be measured during pump operation.

3-27 S2PV-4R3 Rev. 3 March 19, 1992

system:

Pump(s):

Class RELIEF REQUEST P-18 Chemical and Volume Control l-CH-P-2C l-CH-P-20 2

Section XI Code Requirements For Which Relief Is Requested The full-scale range of each instrument shall be three times the reference value or less (IWP-4120).

Basis For Request The inlet pressure gauges for the boric acid transfer pumps have a full scale range of o to 15 psig.

These instruments were sized by evaluating the static pressures present at the suction side of the pumps and applying the three times rule of IWP-4120.

The static pressures range from 6 to 7 psig.

When the pumps are started, the pressure at the suction side of the pumps drops to approximately 2 psig; therefore, the inlet pressure gauges do not meet the three times rule for dynamic inlet pressure.

Using a lower range pressure gauge (i.e. o to 5 psig) would meet the three times rule for dynamic inlet pressure; however, the lower range gauge could not measure static inlet pressure and the lower range gauges would be repeatedly exposed to an overrange condition (static pressures in excess of 5 psig) which would damage the instruments.

Using a lower range temporary gauge on a quarterly basis presents a hardship because the process fluid contains boric acid and is contaminated.

If contaminated, the temporary instruments would probably become waste material.

However, with the current Oto 15 psig inlet pressure gauges, a differential pressure can be determined that exceeds the accuracy requirements for differential pressure.

Each boric acid transfer pump inlet pressure gauge (Oto 15 psig range) and discharge pressure gauge (0 to 150 psig range) has an instrument loop accuracy of 1.59%.

Computing the maximum error for differential pressure using the current instrument configuration yields an error of 2.6 psid.

3-28 S2PV-4R5 Rev. 3 May 1, 1992

RELIEF REQUEST P-18 (Cont.)

Computing the Code allowed error for differential pressure for an inlet pressure gauge with a 2% accuracy and a Oto 5 psig range and a discharge pressure instrument with a 2% accuracy and a Oto 150 psig range yields an error of 3.1 psid.

With the current instrument configuration, the loop accuracy of each pressure instrument could be as high as 1.8%, which equates to a 2.97 psid error, and still be within the Code allowed error of 3.1 psid for differential pressure.

Therefore, for purposes of trending pump degradation using differential pressure and flow, the current instrument is adequate as long as the pressure instrument loop accuracies remain at or below 1.8%.

Alternate Testing Proposed The inlet pressure gauges with a full scale range of o to 15 psig will be used to measure both static and dynamic inlet pressures.

Also, the loop accuracies for the inlet and discharge pressure gauges will be maintained at or below an accuracy of 1.8% to ensure that the differential pressure error is below that the differential pressure error allowed by the Code.

3-29 S2PV-4R5 Rev. 3 May 1, 1992

3.7 ALTERNATIVE TESTING FOR NON-CODE PUMPS S2PV-4R3 According to the minutes of public meeting on Generic Letter 89-04, "Paragraph (g) of 10CFR 50.55a requires the use of Section XI of the ASME Code for inservice testing of components covered by the Code.

For other components important to safety, the licensee also has the burden of demonstrating their continued operability."

The minutes go on to state that, "The Code-required IST program is a reasonable vehicle to provide a periodic demonstration of the operability of pumps and valves not covered by the Code.

If non-Code.

components are included in the ASME Code IST program (or some other licensee-developed inservice testing program) and certain Code provisions cannot be met, the Commission regulations (10 CFR 50.55a) do not require a

'request for relief' to be submitted to the staff.

Nevertheless, documentation that provides assurance of the continued operability of the non-Code components through the performed tests should be available at the plant site."

Non-Code components are components that are important to safety but are not in systems or portions of systems that are classified ASME Class 1, 2 or 3.

Surry Power Station has elected to include certain non-Code components in the ASME IST program.

Where the Code provisions cannot be met for non-Code components, alternative testing is performed that is adequate to ensure continued operability.

The alternate testing is described in this section.

There may be other deviations from Code provisions that are not described in this section.

For these cases, documentation is available at the plant site.

As indicated in the minutes of public meeting on Generic Letter 89-04, a 'request for relief' need not be submitted for non-Code components.

Therefore, the alternative tests described in this section are not

'requests for relief' but are provided for information.

The procedure of providing alternative testing descriptions instead of requests for relief for non-Code components begins with Revision 3.

Requests for relief that were approved by the NRC in Revision 2 for non-Code components will remain in place.

3-30 Rev. 3 March 19, 1992

System:

Pump(s):

Class NON-CODE ALTERNATIVE TESTING PNC-1 Fuel Oil 1-EE-P-1B 1-EE-P-1C 1-EE-P-1E NC Section XI Code Requirements Which Cannot Be Met Measure test quantities after the pump has been running for five minutes.

Measure pump bearing temperatures and vibration in mils.

Measure Inlet and differential pressure.

Basis For Alternate Testing The pump operating time is limited due to operational restraints.

While the diesels are running, these pumps start automatically when the fuei oil level in the day tank reaches the low level switch, and stop when the level reaches the high level switch.

The pump run time can vary depending upon the diesel load and the resulting fuel consumption rate. If the pumps are allowed to run for five minutes prior to measuring the test quantities and the fuel consumption rate is low, not enough time is available to gather all of the required Section XI test data.

The basis for alternative testing for vibration and temperature is described in Relief Request P-1.

The diesel fuel oil transfer pumps are positive displacement pumps.

One characteristic of positive displacement pumps is that the discharge pressure is independent of inlet pressure.

Therefore, to determine pump degradation, only discharge pressure need be measured and compared to the acceptance criteria.

The ASME OM Code-1990, Subsection ISTB, Table ISTB 5.2-1, which is replacing Section XI, Subsection IWP, requires that only discharge pressure need be measured for positive displacement pumps.

3-31 S2PV-4R3 Rev. 3 March 19, 1992

NON-CODE ALTERNATIVE TESTING PNC-1 (Cont.)

Alternate Testing The measurement of Section XI quantities will begin when the pump automatically starts on a low tank level signal.

The alternative testing for vibration and temperature is described in Relief Request P-1.

Inlet pressure will not be measured.

Discharge pressure, flow and vibration will be measured at least once every three months in accordance with Section XI requirements.

The acceptance criteria for flow and discharge pressure will be based on the criteria given in ASME OM Code-1990, Subsection ISTB, Table ISTB 5.2-2b.

The acceptance criteria for vibration is addressed in Relief Request P-1.

3-32 S2PV-4R3 Rev. 3 March 19, 1992

4.0 VALVE INSERVICE TEST PROGRAM DESCRIPTION 4.1 PROGRAM DEVELOPMENT PHILOSOPHY S2PV-5R3 Surry Power station Unit 2 is* a Pressurized Water Reactor being operated in compliance with the ASME Boiler and Pressure Vessel Code.

The qode requires*

periodic testing of certain safety related valves in order to verify their operability and physical integrity.

The Surry Unit 2 Val.ve Inservice Test Program satisfies thes~ requirements.

The program will detect potentially adverse changes in the mechanical condition of valves within the scope of Section XI, Subsection IWV of the Code.

This includes all valves "which are required to perform a specific function in shutting down a reactor to the cold shutdown condition or in mitigating the consequences of' an accident." It is important to note that the scope of ASME Section XI and the Surry Inservice Testing Program for its implementation includes many valves which are not required to operate to meet FSAR license condition of hot shutdown nor limiting conditions in the plant Technical Specifications.

In these cases, the requirements of Section XI shall be met except where relief has been granted.

To generate the Surry Unit 2 Valve Program, ASME Class 1, 2 and 3 valves were analyzed to determine their required type and frequency of testing.

The valves to be tested under Section XI, Subsection IWV commitments

.are listed by system and drawing in the Valve Test

  • Tables.

Surry Unit 2 is committed to meeting the leak rate testing requirements of:

1) 10CFRSO, Appendix J for containmerit isolation valves and
2)

Section XI for other valves for which seat leakage is limited to a specific maximum amount (i.e.

pressure isolation valves) unless relief is specifically requested from Section XI requirements.

Valves subject to leak testing per Appendix J will be tested to the requirements of Section XI, Paragraphs IWV-3426 and 3427.

Appendix J satisfies the testing requirements of Section XI, Paragraphs IWV-3421 to 3425.

4-1 Rev. 3

  • March 19, 1992 I

The Code recognizes that certain of its requirements may be impractical for a specific plant and contains provisions for requesting relief from impractical requirements.

The relief requests for the Valve Inservice Test Program identify testing impracticalities, provide technical basis for the request and propose alternate testing where warranted.

The stroke times of solenoid controlled, air operated valves is both extremely rapid and subject to considerable variation.

Exception is taken to complying with stroke time variations defined by Paragraph IWV-3417(a).

The Surry Unit 2 Valve Inservice Test Program complies with the intent of the applicable codes, regulations and guidelines and it will make a positive contribution to the safe operation of the plant._

4.2 PROGRAM IMPLEMENTATION The Valve Inservice Test Program will be executed as part of the normal plant surveillance routine.

Three types of tests will be conducted as part of the Valve Test Program:*

S2PV-5R3

1)

Valve Operability Tests,

2)

Valve Leakage Tests and

3)

Safety Valve Tests "The Operability Tests will verify that:

1) the valve responds to control commands,
2) the valve stroke time is within specific limits and
3) remote position indication accurately reflects the observed valve position.

Remote valve position indication will be verified every two years.

Fail safe valves will be tested by observing the valve operation upon loss of actuating power.

In most cases, this can be accomplished using normal control circuits.

The follo~ing clarification shall apply to those valves which are scheduled to be exercised during cold shutdown:

"Valve testing shall coiilmence not later than 48 hours5.555556e-4 days <br />0.0133 hours <br />7.936508e-5 weeks <br />1.8264e-5 months <br /> after reaching cold shutdown and continue until complete or unit is ready to return to power.

Completion of the valve 4-2 Rev. 3 March 19, 1992

S2PV-5R3 testing is not a prerequisite to return to power.

Any testing not completed at*one cold shutdown should be performed during the subsequent scheduled cold shutdowns to meet the code specified testing frequency."

Valve Leakage Tests will verify that valves are leak tight in accordance with Appendix J or ASME Section XI.

Relief and Safety valves are not required to be leak rate tested (IWV-3512) and are not included as valves to be leak tested.

Certain valves cannot be full stroke exercised during normal operation following maintenance.

These valves are described in the relief requests and cold shutdown justifications. If maintenance cannot be deferred to a shutdown condition, then an engineering evaluation must be performed prior to the maintenance to determine the effect of the maintenance on valve performance.

If the evaluation shows that performance will not be affected, then no post mainten*ance testing will be required.

A partial stroke test will be performed if possibler To test check vaives to the full open position, the maximum required accident condition flow must be measured through the valve.

In certain cases, this flow cannot be practically established or verified.

Aqcording to Generic Letter 89-04, disassembly and inspection of the check valves on a sampling basis is an acceptable alternative testing method.

_As described in Generic Letter 89-04, the sample disasse~bly and inspection program involves grouping similar valves and testing one valve in each group during each refueling outage.

The sampling technique requires that each valve in the group be the same design (manufacturer, size, model number, and materials of construction) and have the same service conditions including valve orientation. -The group size cannot exceed four valves.

Additionally, at each disassembly it must be verified that the disassembled valve is capable of full-stroking and that the internals of the valve are structurally sound.

Also, to verify the full stroke capability of the valve, the disk should be manually exercised.

A different valve of each group is required to be disassembled, inspected, and manually full stroked exercised at each successive refueling outage, until the entire group has been tested.

If the disassembled valve is not capable of being full stroked exercised or 4-3 Rev. 3 March.19, 1992

4.3 4.4 S2PV-5R3 there is binding or failure of valve internals, the remaining valves in that group must be disassembled, inspected, and manually full stroked exercised during the same outage.

PROGRAM ADMINISTRATION The operations and engineering staffs at Surry Power Station are responsible for administration and execution of the Valve Inservice Test Program.

The program was officially implemented on May 1~ 1983 and governs vaive testing for a 120 month period.

Prior the to end of the 120 month period, the program will be reviewed and upgraded to assure continued compliance with 10CFR50.55a(g) (4).

The program will be updated a minimum of at least once every 40 months or for a new system, relief request, etc.

VALVE INSERVICE TEST TABLES The Valve Inservice Test Tables are the essence of the Valve Program to meet ASME Section XI, Subsection IWV requirements.* The tables reflect the positions taken in support of the relief requests~

To aid the reader in the inter*pretation of the tables, brief explanations of the table headings and-abbreviations are provided.

For non-Code valves, a request for relief is not necessary when provisions of the Code cannot be met.

Section 4.7 contains a discussion of the testing requirements for non-Code valves and descriptions of alternative testing in cases where the provisions of

  • the Code cannot be met.
1)
2)
3)
4)

Valve Number -

Each valve in the plant has a unique "tag" number which identifies the system to which the equipment belongs and type of equipment~

Drawing Location -

The specific coordinates of each valve are supplied to facilitate location of the valves on the flow diagrams provided.

Function -

A brief description of the function of the valve.

Code Class -

ASME Code Class of each valve as per 10 CFR 50.55a and Regulatory Guide 1.26.

NOTE:

NC is for non-Code valves.

These valves are important to safety but are not in systems that are classified ASME Class 1, 2 or 3.

4-4 Rev. 3 March 19, 1992

S2PV-5R3

5)

Category - Categories are defined by ASME Section XI, Subsection IWV.

Each valve has specific testing requirements which are determined by the category to which it belongs.

Valves marked with an "E" are passive valves.

6)

Size -

Nominal pipe diameter to which valve connects is given in inche~.

7)

Valve Type -

A brief description of the actuator and valve type.

The following abbreviations are used to describe actuator types.

Valves may be actuated in more than one way.

MO

- Motor Operated AO Pneumatic (Air Operated)

MAN - Manually Operated so

- Electronic s9lenoid Operated Valves

8)

Isolation Valve Type - Valves that are assigned a maximum leakage.

The following abbreviations are used to describe the isolation valve types:

CIV -

Containment Isolation Valve subject to Appendix J. leakage testing.

PIV - Pressure Isolation Valve *which protects low pressure safety related piping from RCS pressure.

Technical Specification Section 3.1.C specifies the pressure isolation valves that are tested in accordance with this program.

9)

Test Position - The following abbreviations are used to describe normal valve positions to which the valves are tested (including the valve safety position):

o -

Open C -

Closed oc -

Open and Closed

10) Test Required - Testing r~quirementi identified for the valves are identified here.

ST - *stroke times shall be measured per Section XI, Subsubarticle IWV-3410 or as modified by a specific relief request.

4-5 Rev. 3 March 19, 1992

S2PV-5R3 EV -

Exercise valve for operability at least once every 3 months per Section XI, Subsubarticle IWV-3410* or as modified by a specific relief request or cold shutdown justification.

LT -

Leak test shall be performed per Section XI~

Subsubarticle IWV-3420 or as modified by specific relief request.

CV -

Check valves shall be exercised at least once every 3 months per section XI, Subsubarticle IWV-3520 or as modified by a specific relief request or cold shutdown justification.

VP -

Valve position indication shall be verified per Section XI, Subsubarticle IWV-3300 or as modified by a specific relief request.

SP -

Set points of safety and relief valves shall be tested per Section IX, Subsubarticle IWV-3510 or as modified by a specific relief request.

FS - Valves with fail-safe actuators shall be tested by observing the operation of the valves upon loss of the actuator power at least once every 3 months per Section XI, Subsubarticle IWV-3415 or as modified by a specific relief request or cold shutdown justification.

4-6 Rev. 3 March 19; 1992

VALVE NUMBER 2-BD-TV-200A 2-BD-TV-200B 2-BD-TV-200C 2-BD-TV-200D 2-BD-TV-200E 2-BD-TV-200F VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-124A 1 OF 4 C-7 AO GATE "A" STEAM GENERATOR BLOWDOWN, OUTSIDE CON-TAINMENT ISOLATION VALVE 11548~CBM-124A 1 OF 4 C-6 AO GATE "A" STEAM GENERATOR BLOWDOWN, INSIDE CON-TAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 C-7 AO GATE "B" STEAM GENERATOR BLOWDOIJN, OUTSIDE CON-TAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 C-6 AO GATE 11811 STEAM GENERATOR SLOWDOWN, INSIDE CON-TAINMENT ISOLATION VALVE 11548-CBM-124A 3 OF 4 C-7 AO GATE 11C11 STEAM GENERATOR BLOWDOIJN, OUTSIDE CON-TAINMENT ISOLATION VALVE 11548*CBM-124A 3 OF 4

TAINMENT ISOLATION VALVE VALVE.

ASME SIZE CLASS CAt 3.00 2

B 3.00 2

B 3.00 2

B 3.00 2

B 3.00 2

B 3.00 2

B TEST POS C

C C

C C

C ISO VALVE TYPE TEST TYPE EV FS ST VP EV FS ST VP EV FS ST VP EV FS ST VP EV FS ST VP EV FS ST VP PAGE:

1 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-34 34 34 34 34 34 COLD SHUT csv-21 21 21 21 21 21 21 21 21 21 21 21 NC ALT TEST VNC*

VALVE NUMBER 1-CC-569 1 *CC-578 2-cc-001 2-CC-058 VIRGINIA POl,/ER.COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL

  • 1NSERVICE TESTING PROGRAM - VALVE TABLE DRA\\JING SHEET DR\\JG VALVE NUMBER NUMBER COOR TYPE 11448-CBM-OnD 1 OF 5 B-5 CHECK VALVE 11011 COMPONENT COOLING PUMP DISCHARGE CHECK VALVE 11448-CBM-072D.* 1 OF 5 B-5 CHECK VALVE 11C" COMPONENT COOLING PUMP DISCHARGE CHECK VALVE 11548-CBM-072A 2 OF 7 F-7 CHECK VALVE CC SUPPLY TO "A" RC PUMP LO, STATOR SHROUD &

THERM BARRIER COOLERS, ISOL CHECK VLV 11548-CBM-072A 3 OF 7 F-7 CHECK VALVE CC SUPPLY TO 11811 RC PUMP LO, STATOR SHROUD &

THERM BARRIER COOLERS, ISOL CHECK VLV VALVE ASME SIZE CLASS CAT 18.00 3

C 18.00 3

C 6.00' 3 C

6.00 3

C ISO TEST VALVE TEST PCS TYPE TYPE oc CV oc CV C

CV C

CV PAGE:

2 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-

. csv-VNC-6 6

2-CC-059 2-CC-094 2-CC-095 11548-CBM-072A 4 OF 7 F-7 CHECK VALVE CC SUPPLY TO 11C11 RC PUMP LO, STATOR SHROUD &

THERM BARRIER COOLERS, !SOL CHECK VLV 11548-CBM-072A*

2 OF 7 C-6 CHECK VALVE COMPONENT COOLING \\JATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-072A 3 OF 7 C-6 CHECK VALVE COMPONENT COOLING \\JATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 2.0. 3 2.0 3

C C

CV 6

C C

CV 45 C

C CV 45

*----------------~--------

2-CC-176 2-CC-177 11548-CBM-072A 1 OF 7 F-7 CHECK VALVE CC SUPPLY TO RHR HEAT EXCHANGER CHECK VALVE 11548-CBM-072A 1 OF 7 F-7 CHECK VALVE CC SUPPLY TO RHR HEAT EXCHANGER CHECK VALVE 18.00 3

C 18.00 3

C oc CV 5

oc CV 5

2-CC-181 2-CC-185 11548-CBM-072A 1 OF 7. E-2 MANUAL BFLY CC RETURN FROM RHR HEAT EXCHANGER MANUAL ISOLATION VALVE 11548-CBM-072A 1 OF 7 C-2 MANUAL BFLY CC RETURN FROM RHR HEAT EXCHANGER MANUAL ISOLATION VALVE 18.00 3

18.00 3

B oc EV 26 B

oc EV 26

.2-CC-224

'11548-CBM-0728 1 OF 3 D-2 CHECK VALVE CC SUPPLY TO 11C11 RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT ISOLATION CHECK VALVE 6.00 3

C C

CV 5

(

VALVE.

NUMBER 2-CC-233 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAIJING SHEET DRIJG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-0728 1 OF 3 D-6 CHECK VALVE 6.00 3

C CC SUPPLY TO 11811 RECIRC AIR COOLING COILS, ClJTSIDE CONTAINMENT ISOLATION CHECK VALVE ISO TEST VALVE TEST PCS TYPE TYPE C

CV PAGE:

3 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-5 2-CC-242 2-CC-329 2-CC-555 2-CC-556 11548-CBM-0728 1 OF 3 D-8 CHECK VALVE CC SUPPLY TO "A"RECIRC AIR COOLING COILS, ClJTSIDE CONTAINMENT ISOLATION CHECK VALVE 11548-CBM-0718 2 OF 2 D-3 CHECK VALVE CHARGING PUMP COOLING IJATER PUMP DISCHARGE CHECK VALVE 11548-CBM-072A 2 OF 7 C-6 CHECK.VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-072A 3 OF 7 C-6 CHECK VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 6.00 3

C 2.00 3

C 2.0 3

C 2.0 3

C C

CV 5

oc CV C

CV 45 C

CV 45 2-CC-557 2-CC-592 2-CC-764 11548-CBM-072A 4 OF 7 C-6 CHECK VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-072A 4 OF 7 C-6 CHECK VALVE COMPONENT COOLING IJATER TO RCP THERMAL BARRIER ISOLATION CHECK VALVE 11548-CBM-0718 2 OF 2 C-7 CHECK VALVE CHARGING PUMP COOLING IJATER PUMP DISCHARGE CHECK VALVE 2.0 3

2.0 3

2.00 3

C C

CV 45 C

C CV 45 C

oc CV 2-CC-806 2-CC*LCV-201 2*CC*RV-212A 11448-CBMo072E 1 OF 2 C-5 CHECK VALVE CHARGING PUMP SEAL COOLING SURGE TANK MAKEUP CHECK VALVE 11548-CBM-0718 2 OF 2 D-5 AO GATE CHARGING PUMP SEAL COOLING SURGE TANK LEVEL CONTROL/ISOLATION VALVE 11548-CBM-0728 1 OF 3 C-7 RELIEF VALVE REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 1.00 3

1.00 3

0.75 3

C 0

B oc C

0 CV EV FS ST SP 47 30 31 31

VALVE NUMBER 2-CC*RV-2128 2-CC*RV-212C 2-CC*RV-219A 2-CC*RV-219B 2-CC*RV-224 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE.

ISO DRAWING SHEET DRWG NUMBER NUMBER COOR VALVE TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-Ons 1 OF 3 c-s RELIEF VALVE REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 11548-CBM-OnB 1 OF 3 C-3 RELIEF VALVE REACTOR CONTAINMENT AIR RECIRCULATION COOLER RELIEF VALVE 11548-CBM-OnA 1 OF 7 E-3 RELIEF VALVE 11A11 RHR HEAT EXCHANGER COMPONENT COOLING RELIEF VALVE 11548-CBM-OnA 1 OF 7 0-3 RELIEF VALVE 11811 RHR HEAT EXCHANGER COMPONENT COOLING RELIEF VALVE 11548-CBM-OnA 5 OF 7 F-6 RELIEF VALVE COMPONENT COOLING PIPING RELIEF o_.75 3

C 0

SP 0.75 3

C 0

SP 1.50 3

C 0

SP 1.50 3

C 0

SP 0.75 3

C 0

SP PAGE:

4 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-

. -------------------~--

2-CC-RV-238A 2-CC*RV-238B 2-CC-RV-238C 11548-CBM-OnA 2 OF 7 F-6 RELIEF VALVE REACTOR SHROULD COOLING COIL RELIEF VALVE 11548-CBM*OnA 3 OF 7 F-6 RELIEF VALVE REACTOR SHROULD COOLING COIL RELIEF VALVE 11548*CBM-072A 4 OF 7 F-6 RELIEF VALVE REACTOR SHROULD COOLING COIL RELIEF_ VALVE.

0.75 3

0.75 3

0.75 3

C 0

SP C

0 SP C

0 SP 2-CC*RV-250 2*CC*TV-205A 2*CC*TV-205B 11548-CBM-OnA 1 OF 7 E-7 RELIEF.VALVE CC RETURN HEADER RELIEF VALVE 11548-CBM*OnA 2 OF 7 B-4 AO BALL CC RETURN FROM "A" RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VAL-VE 11548-CBM-OnA 3 OF 7 B-4 AO BALL CC RETURN FROM 11811 RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VALVE 3

6.00 3

6.00 3

C B

B

- ---~-- -- ---- -- - ----- ----- ------

0 C

C SP EV FS ST VP EV FS ST VP 6

6 6

6

VALVE NUMBER 2*CC*TV*205C DRAWING SHEET NUMBER NUMBER 11548*CBM*072A 4 OF 7 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT B-4 AO BALL 6.00 3

B CC RETURN FROM "C" RC PUMP LO,STATOR & SHROUD COOLERS, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C

EV FS ST VP PAGE:

5 *OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*

6 6

Z*CC*TV-207 11548*CBM*072A 1 OF 7 D-7 AO.GLOBE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIERS, OUTSIDE CONTAINMENT ISOLATION VALVE 2.50 3

B C

EV FS ST VP 34 27 27 2*CC*TV*209A 11548*CBM*072A 1 OF 7 B-7 AO BFLY CC RETURN FROM 11A" RHR HEAT EXCHANGER, OUT*

SIDE CONTAINMENT ISOLATION VALVE 18.00 3

B oc EV FS ST VP 2*CC*TV*209B 2*CC*TV*210A 2*CC*TV*210B 11548-CBM*O?ZA 1 OF 7 C-7 AO BFLY 18.00 3

CC RETURN FROM "B" RHR HEAT EXCHANGER, OUT*

SIDE CONTAINMENT ISOLATION VALVE 11548*CBM*072B 1 OF 3 E-7 AO BFLY CC RETURN FROM "A" RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*072B 1 OF 3 E*S AO BFLY CC RETURN FROM "B" RECIRC AIR COOLING COILS,.

OUTSIDE CONTAINMENT ISOLATION VALVE 6.00 3

6.00 3

B OC B

C B

C EV FS

  • ST VP EV FS ST VP EV FS ST VP 2*CC*TV*210C 11548*CBM*072B 1 OF 3 E-4 AO BFLY CC RETURN FROM "C" RECIRC AIR COOLING COILS, OUTSIDE CONTAINMENT iSOLATION VALVE 6.00 3

B C

EV FS ST VP

.-----------------------------------------------------------------~ ------------------------* --------------

VALVE NUMBER 2-CC-TV-220A 2-CC-TV-220B 2-CC-TV-220C VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM-072A 2 OF 7 C-5 AO GATE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE 11548-CBM-072A 3 OF 7 C-5 AO GATE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE 11548-CBM-072A 4 OF 7 C-5 AO GATE CC RETURN FROM REACTOR COOLANT PUMP THERMAL BARRIER ISOLATION VALVE VALVE SIZE 1.50 ASME CLASS 3

1.50 3

1.50 3

CAT B

B B

ISO TEST VALVE POS TYPE C

C C

TEST TYPE EV ST VP EV ST VP EV ST VP PAGE:

6 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-27 27 27

VALVE NUMBER 1-CH-109 1-CH-116 2-CH-225 2-CH-227 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL.

INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11448-CBM-OBBA 1 OF 4 C-5 CHECK VALVE 11C11 BORIC ACID TRANSFER PUMP DISCHARGE CHECK VALVE 11448*CBM-088A 1 OF 4 C-4 CHECK VALVE 11011 BORIC ACID TRANSFER PUMP DISCHARGE CHECK VALVE 11548-CBM-0888 1 OF 2 D-3 CHECK VALVE MANUAL EMERGENCY BORATION PATH CHECK VALVE 11548-CBM-0888 1 OF 2 B-5 CHECK VALVE MAIN EMERGENCY BORATION LINE TO CHARGING PUMP SUCTION CHECK VALVE VALVE

  • ASME SIZE CLASS CAT 2.00 2

C

-~-DO 2

  • C 1.0 2

C 2.00 2

C ISO TEST VALVE TEST POS TYPE TYPE 0

CV 0

CV 0

CV 0

CV PAGE:

7 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-19 19 l

2-CH-228 2-CH-229 2-CH-230 11548-CBM-0888 1 OF 2 B-4 MANUAL GATE MANUAL EMERGENCY BORATION PATH MANUAL VALVE 11548-CBM-0888 1 OF 2 B-4 CHECK VALVE MANUAL EMERGENCY BORATION PATH CHECK VALVE 11548-CBM-0888 1 OF 3 C-6 CHECK VALVE CHARGING PUMP *suPPLY FROM VOLUME CONTROL TANK DISCHARGE CHECK VALVE 1.0 2

1.0 2

4.00 2

B 0

EV 19 C

0 CV 19 C

0 CV 2-CH-256 2-CH-258 2*CH-265 11548-CBM-0888 2 OF 2 D-7 CHECK VALVE 11A11 CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE 11548-CBM-0888 2 OF 2 D-7 CHECK VALVE 11A11 CHARGING PUMP DISCHARGE CHECK VALVE 11548-CBM-0888 2 OF 2 D-6 CHECK VALVE 11811 CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE 2.00 2

C 3.00 2

C 2.00 2

C 0

CV oc CV 14 0

CV

~------- *-------------------------------* ----------------------------------- ---------------------------------------

2-CH-267 11548-CBM-0888 2 OF 2 0*6 CHECK VALVE 11811 CHAR.GING PUMP DISCHARGE CHECK VALVE 3.00. 2 C

oc CV 14

*-----------------------~---------.-------------------------------------------------------------------

2-CH-274 11548-CBM-0888 2 OF 2 D-4 CHECK VALVE 2.00 2

C

0.

CV I

"C" CHARGING PUMP DISCHARGE RECIRC LINE CHECK VALVE

VALVE NUMBER 2-CH-276 DRA\\IING SHEET NUMBER NUMBER 11548-CBM-0888 2 OF 2 VIRGINIA PO'.IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DR\\IG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT D-4 CHECIC VALVE 3.00 2

C 11C11 CHARGING PUMP DISCHARGE CHECIC VALVE TEST POS OC 2-CH-309 11548-CBM*OSSC

  • 1 OF 2 D-4 CHECIC VALVE 3.00 2

AC C

MAIN CHARGING SUPPLY HEADER, INSIDE CONTAIN*

MENT ISOLATION CHECIC VALVE 2-CH*FCV-2113A 11548-CBM-OSSB 1 OF 2 C-3 AO GLOBE MANUAL EMERGENCY BORATION PATH FLOIJ CONTROL VALVE

,.o 2

B 0

ISO VALVE TYPE CIV TEST TYPE CV CV LT EV FS ST VP PAGE:

8 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-14 20 2-CH-FCV*2113B 11548-CBM-OSSB 1 OF 3 b-5 AO GATE MAKEUP TO CHARGING PUMP SUCTION LINE ISOLATION VALVE 2*CH*FCV*2114A 11548-CBM*OSSB 1 OF 2 D-4 AO GLOBE

~-----

PRIMARY GRADE \\IATER SUPPLY TO BORIC ACID BLENDER ISOLATION VALVE 2-CH*FCV-2114B 11548-CBM-OSSB 1 OF 3 0-5 AO GATE 2-CH*FCV-2160 PRIMARY GRADE \\IATER TO VCT LINE ISOLATION VALVE 11548-CBM*OSSC 1 OF 2 B-4 AO GLOBE CHARGING FLO\\I CONTROL TO LOOP FILL HEADER, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CH*LCV*2115B 11548-CBM-OSSB 2 OF 2 B*8 MO GATE CHARGING PUMP SUPPLY ISOLATION VALVE FROM REFUELING \\IATER STORAGE TANK 2.00 2

2.0 2

2.00 2

2.00 8.00 2

B C

B C

B C

AE C

B oc CIV EV FS ST VP EV FS ST VP EV FS ST VP LT VP EV ST VP

VALVE NUMBER DRAWING NUMBER VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE SHE.ET

. DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASHE CLASS CAT 2*CH*LCV-2115C 11548*CBM*088B 1 OF 2 C-6 MO GATE 4.00 2

B CHARGING PUMP SUPPLY ISOLATION FROM VOLUME CONTROL TANK ISO TEST VALVE POS

  • TYPE C

TEST TYPE EV ST VP PAGE:

9 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V*

CSV*

VNC*

11 2*CH*LCV-2115D 11548*CBM-088B 2 OF. 2 C-8 MO GATE CHARGING PUMP SUPPLY ISOLATION VALVE FROM REFUELING WATER STORAGE TANK 2*CH*LCV*2115E 11548*CBM*088B 1 OF 2 C-6 MO GATE CHARGING PUMP SUPPLY ISOLATION VALVE, FROM VOLUME CONTROL TANK 8.00 - 2 4.00 2

B oc B

C EV ST VP EV ST VP 11 2-CH*LCV-2460A 11548*CBM-088C OF 2 F-7 AO GLOBE NORMAL LETDOWN TO REGENERAHVE HEAT EXCHANGER ISOLATION VALVE 2.00 B

C EV FS ST VP 15 15 2*CH*LCV*2460B, 11548*CBH*088C 1 OF 2 F-7 AO GLOBE NOR~L LETDOWN TO REGENERATIVE HEAT EXCHANGE.R ISOLATION VALVE 2*CH*HOV-2267A 11548*CBH*088B 2 OF 3 C-7 HO GATE CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP 2*CH*MOV*2267B 1154S*CBM-088B 2 OF 3 B-7 MO GATE LO'J HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 2*CH*MOV*2269A 11548*CBH-088B 2 OF 3 C-5 MO GATE CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP 2.00 6.00 2

6.00 2

6.00 2

B C

B oc E

0 B

oc EV FS ST VP EV ST VP VP EV ST VP 15 15

VALVE NUMBER 2*CH*MOV-2269B DRAWING SHEET NUMBER NUMBER 11548-CBM*088B 2 OF 3 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRWG VALVE COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE B*S MO GATE 6.00 2

E 0

VP LOW HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 2*CH*MOV-2270A 11548-CBM-088B 2 OF 3 C-3 MO GATE 6.00 2

B oc EV ST VP CHARGING PUMP SUCTION ISOLATION VALVE FROM RWST, VCT AND LHSI PUMP PAGE:

10 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ, SHUT TEST V*

CSV*

VNC*

2*CH*MOV*2270B 11548*CBM*088B 2 OF 3 B-3 MO GATE LOW HEAD SI PUMP TO CHARGING PUMP SUCTION ISOLATION VALVE 6.00 2

E 0

VP

. 2*CH*MOV*2275A 11548*CBM*088B 2 OF 2 D-7 MO GATE "A" CHARGING PUMP MINIMUM RECIRCULATION ISO*

LATION VALVE 2-CH*MOV-2275B 11548*CBM-088B 2 OF 2 D-5 MO GATE "B" CHARGING PUMP MINIMUM RECIRCULATION ISO*

LATION VALVE 2*CH*MOV*2275C 11548*CBM*088B 2 OF 2 D-3 MO GATE 11c11 *cHARGING PUMP MINIMUM RECIRCULATION ISO*

LATION VALVE 2*CH*MOV*2286A 11548*CBM*088B 2 OF 2 E-7 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 2*CH*MOV*2286B 11548*CBM-088B 2 OF 2 E-6 MO GATE CHARGING PUMP MAIN D.ISCHARGE ISOLATION VALVE 2.00 2

2.00 2

2.00 2

3.0 2

3.0 2

B oc B

oc B

oc B

oc B

oc EV ST VP EV ST VP EV ST VP EV ST VP EV ST VP 2*CH*MOV*2286C 11548-CBM-0888 2 OF 2 E-4 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 3.0 2

B oc EV ST VP

VALVE NUMBER DRAWING NUMBER VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE.

ASHE CLASS CAT 2*CH*MOV-2287A 11548-CBM*OSSB 2 OF 2 D-7 MO GATE 3.0 2

B CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE TEST POS oc ISO VALVE TEST TYPE TYPE EV ST VP PAGE:

11 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-CH-MOV-2287B 11548-CBM-088B 2 OF 2 D-6 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 3.0 2

B oc EV ST VP 2-CH-MOV-2287C 11548*CBM-088B 2 OF 2 0-4 MO GATE CHARGING PUMP MAIN DISCHARGE ISOLATION VALVE 2-CH-MOV-2289A 11548-CBM*OSSC 1 OF 2 B-4 MO GATE MAIN CHARGING HEADER ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*CH-MOV-2289B 11548-CBM*OSSC 1 OF 2 B-3 MO GATE 2-CH-MOV-2350 2-CH-MOV-2373 2-CH*MOV-2381 MAIN CHARGING HEADER ISOLATION VALVE, OUTSIDE CONTAINMENT 11548-CBM-088B 1 OF 2 B-5 MO GATE.

EMERGENCY BORATION TO CHARGING PUMP SUCTION 11548-CBM*OSSB 2 OF 2. E-7. MO GATE CHARGING PUMP RECIRCULATION HEADER ISOLATION VALVE 11548-CBM*OSSB 1 OF 2 C-8 MO GATE.

REACTOR COOLANT PUMP SEAL WATER RETURN, OUT*

SIDE CONTAINMENT ISOLATION VALVE 3.0 2

3.00 2

3.00 2

2.00 2

3.00 2

3.00 2

B oc A

C B

C B

0 B

0 A.

C CIV CIV EV ST VP EV LT ST VP EV ST VP EV ST VP VP EV LT ST VP 16 16 19 13

VALVE NUMBER 2-CH-RV-2203 2-CH**RV-2382A 2-CH-RV-2382B 2-CH-TV-2204A 2-CH-TV-2204B VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAWING SHEET DRWG NUMBER NUMBER COOR VALVE TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-OSSC

1. OF 2 F-4 RELIEF VALVE LETDOWN RELIEF VlV DOWNSTREAM OF REGEN HX, RV DISCHARGE TO PRESSURIZER RELIEF TANK 11548-CBM-OSSC 2 OF 2 F-5 RELIEF VALVE REACTOR COOLANT PUMP SEAL WATER RELIEF VALVE, RV DISCHARGE TO PRESSURIZER RELIEF TANK 11548-CBM-OSSB 1 OF 2 C-7 RELIEF VALVE SEAL WATER HEAT EXCHANGER RELIEF VALVE, RV DISCHARGE TO VOLUME CONTROL TANK 11548-CBM-OSSC 1 OF 2 D-3 AO GATE

. LETDOWN CONTROL FROM REGEN HX, INSIDE CONTAINMENT ISOLATION VALVE 11548°CBM-088A 4 OF 4 D-3 AO GATE LETDOWN CONTROL FROM REGEN HX, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2

C 2.00 2

C 2.00 2

C 2.0 2*

B 2.0.

2 B

0 0

0 C

C SP SP SP CIV

12 OF 63 REVISION: 03 DATE: 3/19/92 NC REL

_COLD ALT REQ SHUT TEST V-CSV-VNC-34 15 15 15 15

VALVE NUMBER 2-CS-013 2-CS-024 2-CS-104 VIRGINIA PO~ER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO ORA~ING NUMBER SHEET OR~G VALVE NUMBER COOR TYPE VALVE

8.00 2

8.00 2

AC OC AC OC C

oc CIV CIV CV LT CV LT CV PAGE:

13 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLO ALT REQ SHUT TEST V-CSV-VNC-43 43 43

J 2-CS-105 11548-CBM-084A 2 OF 3 E-3 CHECK VALVE 8.00. 2 C

OC CV 43 2-CS-MOV-200A 2-CS-MOV-200B 2-CS-MOV-201A 2*CS-MOV*201B 2*CS*MOV*201C CONTAINMENT SPRAY PUMP DISCHARGE CHECK VALVE 11548*CBM*084A 2 OF 3 B*7 MO GATE CONTAINMENT SPRAY PUMP SUCTION ISOLATION VALVE 11548*CBM*084A 2 OF 3 A*7 MO GATE CONTAINMENT SPRAY PUMP SUCTION ISOLATION VALVE 11548*CBM*084A 2 OF 3 F*S HO GATE "A" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*084A 2 OF 3 F*S MO GATE "A" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*084A 2 OF 3 E*S HO GATE "B" CONT SPRAY PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 12.00 2

12.00 2

8.00 2

8.00 2

8.00 2

B 0

B 0

A oc A

oc A

oc CIV CIV CIV EV ST VP EV ST VP EV LT ST VP EV LT ST VP EV LT ST VP 39 39 39

VALVE NUMBER 2-CS-MOV*201D DRAWING SHEET NUMBER NUMBER 11548-CBM-084A 2 OF 3 VIRGINIA PO\\lER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT E-5 MO GATE 8.00 2

A "B" CONT SPRAY -PUMP DISCHARGE ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE

_DC CIV EV LT ST VP PAGE:

14 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-39 2*CS-MOV-202A 2*CS-MOV-202B 11548-CBM-084A 3 OF 3 C-6 MO GATE CHEMICAL ADDITION TANK DISCHARGE TO.RWST ISOLATION VALVE 11548-CBM-084A 3 OF 3 B-6 MO GATE CHEMICAL ADDITION TANK DISCHARGE TO RWST ISOLATION VALVE

  • 6.00 2

6.00 2

B B

0 0

EV ST VP EV ST VP

~----------------------------------------------------------------------------------'

VALVE NUMBER 2-cv-002 2-CV-HCV-200 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRA\\,/ING NUMBER SHEET DR\\,/G VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM*OSSA 1 OF 2 D-4 MAN GATE CONTAINMENT VACUUM EJECTOR SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*OSSA 1 OF 2 D-3 AO GATE CONTAINMENT VACUUM EJECTOR, INSIDE CONTAIN*

MENT ISOLATION VALVE 8.00 2

8.00 2

AE C

CIV AE C

CIV LT LT VP PAGE:

15 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V-CSV-VNC-2-CV*TV-250A 2-CV-TV-250B 2-CV*TV*250C 2*CV*TV*250D 11548-CBM*OSSA 2 OF 2 E-4 AO GATE "A" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*OSSA 2 OF 2 E-5 AO GATE "A" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT* ISOLATION VALVE 11548-CBM*OSSA 2 OF 2 D-4 AO GATE "B" *coNTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM-085A 2 OF 2 D-5 AO GATE "B" CONTAINMENT VACUUM PUMP SUCTION ISOLATION VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2

2.00 2

2.00 2

2.00 2

A C

CIV A

C CIV A

C CIV A

C CIV EV FS LT ST 34 VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP 34 34 34

VALVE NUMBER 2-CW-117 2-CW-MOV-200A VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-071A 2 OF 3 F-3 MANUAL BFLY 12.00 NC 8

DISCHARGE TUNNEL VENT VALVE 11548-CBM-071A 2 OF 3 F*7 MO BFLY 96.00 NC 8

CONDENSER DISCHARGE ISOLATION VALVE TEST POS 0

C ISO VALVE TYPE TEST

  • TYPE EV EV ST VP PAGE:

16 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2

~--------------------------. ----------------------------------------------------------------------------- -

2-CW-MOV-200B 11548-CBM-071A 2 Of 3 F-7 MO BFLY 96.00 NC CONDENSER DISCAHRGE ISOLATION VALVE 2-CW-MOV-200C 11548-CBM-071A 2 OF 3 F-6 MO BFLY 96.00 NC CONDENSER DISCHARGE ISOLATION VALVE 8

C B

C EV ST VP EV ST VP

*-----*-----~-------. -------------------------------------------------~--------------------

2-CW-MOV-200D 11548*CBM-071A 2 OF 3 F-5 MO BFLY CONDENSER DISCHARGE ISOLATION VALVE 2-CW-MOV-206A 11548-CBM*071A 2 OF 3 D-7 MO BFLY CONDENSER INLET ISOLATION VALVE 2-CW-MOV-206B 11548-CBM-071A 2 OF 3 D-7 MO BFLY CONDENSER INLET ISOLATION VALVE 2-CW-MOV-206C 1154S*CBM-071A 2 OF 3 0-5 MO BFLY CONDENSER INLET ISOLATION VALVE 2*CW-MOV*206D 11548*CBM*071A 2 OF 3 D-5 MO BFLY CONDENSER INLET ISOLATION VALVE 96.00 NC B

96.00. 3 8

96.00 3

8 96.00. 3 8

96.00 3

8 C

C C

C C

EV ST VP EV ST VP EV ST VP EV ST VP EV ST VP

VALVE NUMBER 2-DA*TV-200A DRAWING SHEET NUMBER NUMBER 11548-CBM-083B 3 OF 3 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE

.DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT B-3 AO GATE 2.00 2

A REACTOR CONTAINMENT SUMP PUMPS DISCHARGE, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C

CIV EV FS LT ST VP PAGE:

17 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2-DA*TV-200B 2-DA-TV-203A 11548-CBM-083A 1 OF 2 E-3 AO GATE REACTOR CONTAINMENT SUMP PUMPS DISCHARGE, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-083B 3 OF 3 E-3 AO GATE POST ACCIDENT SAMPLE SYSTEM RETURN, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2

2.00 2

A C

CIV A

C CIV EV FS LT ST VP EV FS LT ST VP 34 34 2-DA-TV-203B 11548-CBM-083B 3 OF 3 E-3 AO GATE POST ACCIDENT SAMPLE SYSTEM RETURN, OUTSIDE CONTAINMENT TRIP VALVE.

2.00 2

A C

CIV EV FS LT ST VP 34

VALVE NUMBER 2-DG-TV-208A DRAWING SHEET NUMBER NUMBER 11548-CBM-083B 1 Of 3 VIRGINIA POl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT B-2 AO GATE 2.00 2

A PRIMARY DRAIN TRANSFER PUMPS DISCHARGE, INSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C

.CIV EV FS LT ST VP PAGE:

18 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-DG-TV-2088 11548-CBM-083A 2 OF 2 C-3 AO GATE PRIMARY DRAIN TRANSFER PUMPS DISCHARGE, OUT*

SIDE CONTAINMENT ISOLATION VALVE 2.00 2

A C

CIV EV FS LT ST VP 34

,I I

VALVE NUMBER 1-EE-013 1-EE-019 1-EE-031 1-EE-RV-104 1-EE-RV-105 1-EE*RV-107 1-EE*SOV-102 1-EE-SOV-103 1-EE-SOV-104 VIRGINIA PO\\.IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAWING NUMBER SHF.ET DRI.IG VALVE NUMBER COOR TYPE VALVE.

ASME TEST VALVE TEST SIZE CLASS CAT POS TYPE TYPE 11448-CBB*038A 2 OF 3 D-7 CHECK VALVE DIESEL EMERGENCY GENERATOR FUEL OIL PUMP DISCHARGE CHECK VALVE 11448-CBB-038A 2 OF 3 F-7 CHECK VALVE DIESEL EMERGENCY GENERATOR FUEL OIL PUMP DISCHARGE CHEC~ VALVE 11448-CBB-038A 2 OF 3 D-6 CHECK VALVE DIESEL EMERGENCY GEIIERATOR FUEL OIL PUMP DISCHARGE CHECK VALVE 11448-CBB-038A 2 OF 3 D-7 RELIEF VALVE DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 11448-CBB-038A 1 OF 3 F-7 RELIEF VALVE DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 11448-CBB-038A 2 OF 3 D-6 RELIEF VALVE DIESEL FUEL OIL PUMP DISCHARGE RELIEF VALVE 11448-CBB*038A 2 OF 3 D-4 SO GATE DIESEL FUEL OIL PUMP DISCHARGE VALVE 11448-CBB*038A 2 OF 3 D-4 SO GATE DIESEL FUEL OIL PUMP DISCHARGE VALVE 11448-CBB-038A 2 OF 3 F-4 SO GATE DIESEL FUEL OIL PUMP DISCHARGE VALVE 1.50 NC 1.50 NC 1.50 NC 0.50 NC 0.50 NC 0.50 NC 1.00 NC 1.00 NC 1.00 NC C

0 CV C

0 CV C

0 CV C

0 SP C

0 SP C

0 SP B

0 EV B

0 EV B

0 EV PAGE:

19 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT

.REQ SHUT TEST V-CSV*

VNC-36 36 36

VALVE NUMBER 2-EG-040' VIRGINIA POl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11448-CBB-046B 1 OF 2 B-8 CHECK VALVE DIESEL GENERATOR COMPRESSOR DISCHARGE CHECK VALVE VALVE SIZE 0.75 ASME CLASS CAT NC AC TEST POS C

ISO VALVE TEST TYPE TYPE CV LT PAGE:

20 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT

. REQ SHUT TEST v-csv-VNC*

~-----------------------------------------------------------------------------------------

2-EGs042 2-EG-043 2*-EG-044 11448-CBB-046B 1 OF 2 B-4 CHECK VALVE

-DIESEL GENERATOR COMPRESSOR DISCHARGE* CHECK VALVE 11448-CBB-046B 1 OF 2 E-7 AIR PILOT EMERGENCY DIESEL GENERATOR STARTING AIR/DRIVE AIR CONTROL/RELAY VALVE 11448-CBB-046B 1 OF 2 E-3 AIR *PILOT EMERGENCY DIESEL GENERATOR STARTING AIR/DRIVE AIR CONTROL/RELAY VALVE 0.75 NC AC C

NC B

0 NC B

0 CV LT EV ST

_EV ST 3

3 2-EG-045 11448-CBB-046B 1 OF 2 E-7 CHECK VALVE EMERGENCY DIESEL GENERATOR START PRESSURE EQUALIZING CHECK VALVE NC c

  • oc*

3

. ----------------------------------~-----------------------------------------------*-------------------. -------------------

2-EG-046 2-EG*SOV-200A 2-EG*SOV-200B 11448*CBB-046B. 1 OF 2 E-4 CHECK VALVE EMERGENCY DIESEL GENERATOR START PRESSURE EQUALIZING CHECK VALVE 11448-CBB-046B 1 OF 2 0-7 SO GATE DIESEL AIR START SYSTEM SOLENOID VALVE 11448-CBB-046B 1 OF 2 0-4 SO GATE DIESEL AIR START SYSTEM SOLENOID VALVE NC C

1.00 NC B

1.00 NC B

oc oc oc CV EV ST EV*

ST 3

37 37

VALVE NUMBER 2-FP-151 2-FP-152 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASME NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11448-CBB-0478 1 OF 3 D-4 MAN BALL 4.00 2

AE FIRE PROTECTION SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE TEST POS C

11448-CBB-0478 1 OF 3 D-5 MAN BALL FIRE PROTECTION SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 4.00 2

AE C

ISO VALVE TEST TYPE TYPE CIV LT CIV LT PAGE:

21 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST v-csv-VNC-

VALVE NUMBER 2*FW*010 2*FW*027 VIRGINIA PO'JER COMPANY

C 3.00 2

C ISO TEST VALVE POS TYPE C

0 TEST TYPE CV CV PAGE:

22 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*

CSV*

VNC*

5 4

2*FW*041 11548-CBM*068A 1 OF 4 D*6 CHECK VALVE 118" MAIN FEEDWATER HEADER SUPPLY, INSIDE CONTAINMENT PENETRATION CHECK VALVE 14.00 2

C C

CV 5

2-FW-058 11548*CBM*068A 1 OF 4 C*6 CHECK VALVE "B" AUXILIARY FEEDWATER HEADER CHECK VALVE AT MAIN FEEDWATER HEADER 3.00 2

C 0

CV 4

2* FW-072 11548*CBM*068A 1 OF 4 C-6 CHECK VALVE "C" MAIN FEEDWATER SUPPLY, I.NS IDE CONTAINMENT

. PENETRATION CHECK VALVE 14.00 2

C C

CV 5

2-FW-089 2-FW-131 11548-CBM-068A 1 or 4 B-7 CHECK VALVE 11C" AUXILIARY FEEDIJATER HEADER CHECK VALVE AT.

MAIN FEEDWATER HEADER 11548*CBM*068A 1 OF 4 8*4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* INSIDE 3.00 2

6.00 2

C 0

CV 4

C 0

CV 4*

2-FW-133 11548*CBM*068A 1 OF 4 8*4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* OUTSIDE 6.00.

2 C

0 CV 4

2-FW* 136 2-FW* 138 11548*CBM*068A 1 OF 4 A-4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT CONTAINMENT PENETRATION* INSIDE 11548*CBM*068A 1 OF 4 A-4 CHECK VALVE AUXILIARY FEEDWATER HEADER CHECK VALVE AT.

CONTAINMENT PENETRATION* OUTSIDE 6.00 2

6.00 2

C 0

CV 4

C 0

CV 4

---. ------------------------------------. --------------------~-----------* ------------------------------------------------

2-FW-142 11548*CBM*068A 3 OF 4 D-8 CHECK VALVE TURBINE_DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE 6.00 3

C oc CV 4

2*FW*144 11548*CBM*068A 3 OF 4 D-7 CHECK VALVE TURBINE DRIVEN AUXILIARY FEEDWATER PUMP RECIRC LINE CHECK VALVE 1.00 3

C 0

CV 41

VALVE NUMBER 2-F.W-148 2-FW-157 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-068A 3 OF 4 E-7 CHECK VALVE

~-------------------

AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 11548-CBM-068A 3 OF 4 D-6 CHECK VALVE "A" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE VALVE ASME SIZE CLASS CAT 1.00 3

C C

ISO TEST VALVE POS TYPE 0

oc TEST TYPE CV CV PAGE:

23 OF 63 REVISION: 03 DATE: 3/19/92 NC

  • REL COLD ALT REQ SHUT TEST V-CSV-VNC-41 4

2:;~:;;~---------;;;4a:~;;:o~---i-~;-4--~:6---~~~~~-~~~~~-------;~oo---i------~----~------------~~------;;;--------------

~

2-FW-163 2-FW-172 2-FW-174 2-FW-178 2-FW-272 "A" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP RECIRC LINE. CHECK VALVE 11548-CBM-068A 3 OF 4 E-6 CHECK VALVE AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 11548-CBM-068A 3 OF 4 D-5 CHECK VALVE "B" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP DISCHARGE CHECK VALVE 11548-CBM-068A.

3 OF 4 D-5 CHECK VALVE 11B" MOTOR DRIVEN AUXILIARY FEEDWATER PUMP

.RECIRC LINE CHECK VALVE 11548-CBM-068A 3 OF 4 E-4 CHECK VALVE AUXILIARY FEEDWATER TO PUMP OIL COOLER CHECK VALVE 11548-CBM-068A 1 OF 4 A-8 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 1.00 3

6.00 3

1.00 3

1.00 3

6.00 2

C

  • 0 CV 41 C

QC CV 4

C 0

CV 41 C

0 CV 41 C

0 CV 4

2-FW-273 2-FW-305 2-FW-306 11548-CBM-068A 1 OF 4 A-7 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 11548-CBM-068A 1 OF 4 A-5 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 11548-CBM-068A 1 OF 4 A-5 CHECK VALVE CHECK VALVE AT CONT PENE (CROSS - CONNECT FOR UNIT 1 AUX FEED FROM UNIT 2) 6.00 2

C 6.00 2

C 6.00 2

C 0

CV 4

0 CV 4

0 CV 4

2-FW*FCV-2478 11548-CBM-068A 1 OF 4 E-4 AO GATE 14.00 NC MAIN FEEDWATER REGULATING VALVE B

C EV FS ST VP 28

.. 28

VALVE NUMBER 2-FW-FCV-2488 2-FW-FCV-2498 2-FW*HCV*255A 2*FW*HCV*255B 2*FW*HCV*255C VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-068A 1 Of 4 D-4 AO GATE 14-00 NC B

MAIN FEEDWATER REGULATING VALVE 11548-CBM*068A 1 OF 4 B-4 AO GATE 14.00 NC B

MAIN FEEDWATER REGULATING VALVE 11548-CBM-068A 1 OF 4 F-3 AO GATE 4.00 NC B

  • MAIN FEEDWATER REGULATING VALVE BYPASS VALVE 11548-CBM~068A 1 OF 4 D-3 AO GATE 4.00 NC B

MAIN FEEDWATER REGULATING VALVE BYPASS VALVE 11548-CBM*068A 1 OF 4 C-3 AO GATE 4.00 NC B

MAIN FEEDWATER REGULATING VALVE BYPASS VALVE ISO TEST VALVE POS TYPE C

C C

C C

TEST TYPE EV FS ST VP EV FS.

ST VP EV*

FS ST

. VP EV FS.

ST VP EV FS ST VP PAGE:

24 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-COLD SHUT csv-28 28 28 28 28 28 28 28 28 28 NC ALT TEST VNC*

2*FW*MOV*251A 2-FW*MOV-251B 11548-CBM*068A 1 OF 4 B-7 MO GLOBE NORMAL AUXILIARY FEEDWATER SUPPLY TO "C" STEAM GENERATOR 11548*CBM*068A 1 OF 4 B-7 MO GLOBE STANDBY AUXILIARY FEEDWATER SUPPLY TO 11C11 STEAM GENERATOR 3.00 2

3.00 2

B oc B

oc EV ST VP EV ST VP 2-FW*MOV*251C 11548-CBM-068A 1 OF 4 B-6 MO GLOBE STANDBY AUXILIARY FEEDWATER SUPPLY TO "B" STEAM GENERA TOR 3.00 2

B oc EV ST VP

VALVE NUMBER 2-FW-MOV-251D VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE

. DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM-068A 1 OF 4 B-6 MO GLOBE NORMAL AUXILIARY FEEDWATER SUPPLY TO "B" STEAM GENERATOR VALVE.

SIZE ASHE CLASS CAT 2

B TEST P.OS oc ISO VALVE TEST TYPE TYPE EV ST VP PAGE:

25 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-FW-MOV-251E 2-FW-MOV-251F 2-FW-MOV-260A 2-FW-MOV-260B 11548-CBM-068A 1 OF 4 B-6 MO GLOBE STANDBY AUXILIARY FEEDIJATER SUPPLY TO "A" STEAM GENERATOR, 11548-CBM-068A 1 OF 4 B-5 MO GLOBE STANDBY AUXILIARY FEEDWATE.R SUPPLY TO 11A11 STEAlil GENERATOR 11448-CBM-068A 3 OF 4 F-7 MO GLOBE CROSS - CONNECT FOR UNIT 1 AUXILIARY FEED-WATER FROM UNIT 2 11448-CBM-068A 3 OF 4 F-7 MO GLOBE CROSS - CONNECT FOR UNIT 1 AUXILIARY FEED-WATER. FROM UNIT 2 3.00 2

3.00 2

6.00 3

6.00 3

B oc B

oc B

0 B

o EV ST VP EV ST VP EV ST VP EV ST VP

VALVE NUMBER 2-GW*TV-200 2-GW*TV-201 2-GW*TV-202 2*GW*TV*203 2-GW*TV*204 2*GW*TV*205 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASME NUMBER NUMBER COOR TYPE SIZE CLASS 11448*CBM*090C 1 OF 1 C-4 SO GATE 0.375 2

SUCTION LINE TO HYDROGEN ANALYZER* UNIT 1 l1448*CBM-090C 1 OF 1 C-4 SO GATE 0.375 2

SUCTION LINE TO HYDROGEN ANALYZER* UNIT 1 11448*CBM-090C 1 OF 1 B-4 SO GATE 0.375 2

DISCHARGE LINE TO HYDROGEN ANALYZER* UNIT 1 11448*CBM-090C 1 OF 1 B-4 SO GATE 0.375 2

DISCHARGE LINE TO HYDROGEN ANALYZER* UNIT 1 11448*CBM-090C 1 OF 1 E-4 SO GATE 0.375 2

SUPPLY TO UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 11448*CBM-090C 1 OF 1 E-4. SO GATE SUPPLY TO UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 2

CAT A

A A

A A

A ISO TEST VALVE POS TYPE C

CIV C

CIV C

CIV C

CIV C

CIV C

CIV TEST TYPE EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP PAGE:

26 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD AP REQ SHUT TEST v-csv-VNC*

34 34 34 34 34 34 2-GW*TV-206 11448-CBM*090C 1 OF 1 D-4 SO GATE RETURN FROM UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 2

A C

CIV EV FS LT ST VP 34 I

VALVE NUMBER 2-GW-TV-207 2-GW*TV-211A 2-GW-TV-2118 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYP.E 11448-CBM-090C 1 OF 1 D-4 SO GATE RETURN FROM UNIT 2 HYDROGEN ANALYZER, OUTSIDE CONTAINMENT ISOLATION VALVE 11448*CBM-090C 1 OF 1 F-3 SO GATE UNIT 1 SAMPLE LINE TO AIR SAMPLE PANEL, INSIDE CONTAINMENT ISOLATION VALVE 11448-CBM-090C 1 OF 1 F-3 SO GATE UNIT 1 SAMPLE LINE TO AIR SAMPLE PANEL, OUTSIDE CONTAINMENT ISOLATION VALVE VALVE ASHE SIZE CLASS CAT 0.375 2

A 0.375 2

A 0.375 2

A TEST POS C

C

c.

ISO VALVE TEST TYPE TYPE CIV EV FS LT ST VP CIV

LT ST VP PAGE:

27 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*

34 34 34

~---------------*----------------------------------------------------------------------* ---

I

VALVE NUMBER 2-IA-381 2-IA-384 2-IA-395 2-IA-396 2-IA-446 2-IA-704 2-IA-864 2-IA-868 2-IA-947 VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG. VALVE NUMBER COOR TYPE 11548-FM -075C 2 OF 2 B-6 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2456 ISOLATION CHECK VALVE 11548-FM -075C 2 OF 2 B-5 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2455C ISOLATION CHECK VALVE 11548-FM -075C 2 OF 2. B-6 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2456 SUPPLY CHECK VALVE 11548-FM -075C 2 OF 2 B-5 CHECK VALVE BOTTLED AIR SUPPLY TO 2-RC-PCV-2455C SUPPLY CHECK VALVE 11448-CBM-075C 1 OF 4 D-7 MAN GATE BACKUP INSTRUMENT AIR TO CONTAINMENT FROM UNIT 2 11548-CBM-075B 2 OF 2 C-3 MAN.GATE BACKUP INSTRUMENT AIR TO CONTAINMENT FROM UNIT 2 11548-CB~-075C 1 OF 2 E-3 CHECK VALVE INS1RUMENT AIR SUPPLY TO CONTAINMENT, INSIDE CONTAINMENT ISOLATION CHECK VALVE 11548-CBM-075C 1 OF 2 E-3 CHECK VALVE INSTRUMENT AIR SUPPLY TO CONTAINMENT, INSIDE CONTAINMENT ISOLATION CHECK VALVE 11548-FM -0750 1 OF 1 B-7 CHECK VALVE BOTTLED AIR SUPPLY TO 2-MS-SOV-202A,B ISOLATION CHECK VALVE VALVE SIZE 0.75 ASHE CLASS NC 0.75 NC 0.75 NC O. 75 NC 2.00

2.

2.00 2

2.00 2

2.00 2

0.5 NC TEST CAT POS AC C

AC C

C 0

C 0

AE C

AE C

AC C

AC C

AC C

ISO VALVE TYPE CIV CIV CIV CIV TEST TYPE CV LT CV LT CV CV LT LT CV LT CV LT CV LT PAGE:

28 OF.63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-39 44 44 2-IA-948 2-IA-RV-210 11548-FM -075D 1 OF 1 9-8 CHECK VALVE BOTTLED AIR SUPPLY TO 2-MS-SOV-202A,B SUPPLY CHECK VALVE 11548-CBM-075C 2 OF 2 B-6 RELIEF VALVE BOTTLED AIR SUPPLY TO PORV'S RELIEF VALVE 0.5 NC NC C

0 CV C

  • VALVE NUMBER 2-IA-RV-211 2-IA-TV-200 2-IA-TV-201A 2-IA-TV*201B VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE.TESTING PROGRAM - VALVE TABLE DRAIJING SHEET DRIJG VALVE NUMBER NUMl!ER COOR TYPE 11548-CBM-075C 2 OF 2 B-5 RELIEF VALVE BOTTLED AIR SUPPLY TO PORV'S RELIEF VALVE 11548-CBM,075B 2 OF 2 B-3 AO GATE INSTRUMENT AIR SUPPLY TO CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-075J 1 OF 1 A-3 AO GATE INSTRUMENT AIR SUCTION FROM CONTAINMENT 11548-CBM-075J 1 OF 1 A-3 AO GATE INSTRUMENT AIR SUCTION FROM CONTAINMENT VALVE ASME SIZE CLASS CAT NC C

2.00 2

A 3.00 2

A 3.00 2

A ISO TEST VALVE POS TYPE 0

C CIV C.

CIV C

CIV TEST TYPE SP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP PAGE:

29 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-39 34 34 NC COLD ALT SHUT TEST csv-VNC-

VALVE NUMBER 2-LM-TV-200A 2-LM*TV*200B 2-LM-TV-200C 2-LM*TV-200D VIRGINIA PQ',/ER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRA\\JING SHEET DR\\JG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-OBSA 1 OF 2 B-6 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-6 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA

  • 1 OF 2 B-5 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-5 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE VALVE ASME SIZE CLASS CAT 0.375 2

A 0.375 2

A 0.375 2

A 0.375 2

  • A ISO TEST VALVE POS TYPE C

CIV C

CIV C

CIV C

CIV TEST TYPE EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP PAGE:

30 OF 63 REVISION: 03 DATE: 3/19/92 REL REQ v-39 34 39 34 39 34 39 34 NC COLD ALT SHUT TEST csv-VNC-2-LM*TV-200E 2-LM-TV-200F 2*LM*TV-200G 11548-CBM-OBSA 1 OF 2 B-4 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-5 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-OBSA 1 OF 2 B-6 AO GATE CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 2

A 0.375 2

A 0.375 2

A C

CIV C

CIV C

CIV EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP 39 34 39 34 39 34

  • VALVE NUMBER 2*LM-TV-200H DRAIJING SHEET NUMBER NUMBER 11548-CBM*OBSA 1 OF 2 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRIJG VALVE VALVE.

ASME COOR TYPE SI_ZE CLASS CAT B-7 AO GATE 0.375 2

A CONTAINMENT LEAKAGE MONITORING OPEN SYSTEM SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C

CIV EV FS LT ST VP PAGE:

31 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V*

CSV*

VNC-39 34

VALVE NUMBER 2-MS-087 VIRGINIA Pa.lER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAIJING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-064A 1 OF 6 C-6 MANUAL GATE MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP ISOLATION VALVE 4.0 2

B C

EV PAGE:

32 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV*

VNC-2-MS-120 11548-CBM-064A 2 OF 6 C-6 MANUAL GATE MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP ISOLATION VALVE 4.0 2

B C

EV 2-MS-158 2-MS-176.

2-MS-178 11548-CBM-064A 3 OF 6 C-6 MANUAL GATE MAIN STEAM LINE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP iSOLATION VALVE 11548*CBM-064A 4 OF 6 C-7 CHECK VALVE "A" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 11548*CBM-064A 4 OF 6 D-7 CHECK VALVE 118" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 4.0 2

3.00 2

3.00 2

B C

EV C

oc CV 42 C

QC CV 42 2-MS-182 11548-CBM*064A 4 OF 6 D-7 CHECK VALVE "C" MAIN STEAM HEADER SUPPLY CHECK VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 3.00 2

C QC CV 42 2*MS*NRV-201A 2-MS*NRV-2018 2-MS*NRV-201C 2-MS-PCV-202A 11548-CBM-064A 1 OF 6 E-4 MO STOP CHECK "A" MAIN STEAM HEADER NON-RETURN VALVE 11548-CBM-064A 2 OF 6 D-3 MO STOP CHECK 11811 MAIN STEAM HEADER NON-RETURN VALVE 11548-CBM-064A 3 OF 6 D-3 MO STOP CHECK "C" MAIN STEAM HEADER NON-RETURN VALVE 11548-CBM-064A 4 OF 6 C-4 AO GATE MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDIJATER PUMP 30.00 2

30.00 2

30.00 2

3.00 2

C C

C C

C C

B QC CV VP CV VP CV VP EV FS ST VP 48 48 48

VALVE NUMBER 2-MS-PCV-2028 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL JNSERVJCE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548*CBM-064A 4 OF 6 D*S AO GATE MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDWATER PUMP VALVE SIZE 3.00 ASME CLASS CAT 2

B TEST POS oc ISO VALVE TEST TYPE TYPE EV FS ST VP PAGE:

33 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-MS-RV-201A 2-MS-RV-201B 2-MS-RV-201C 2-MS-SV-201A 2-MS-SV-201B 2-MS-SV-201C 11548-CBM-064A 1 OF 6 E-5 AO ANGLE "A" MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 11548-CBM-064A 2 OF 6 E-6 AO ANGLE 11911 MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 11548-CBM-064A 3 OF 6 E-5 AO ANGLE "C" MAIN STEAM HEADER DISCHARGE TO ATMOSPHERE POWER OPERATED RELIEF VALVE 11548-CBM-064A 1 OF 6 E-6 SAFETY VALVE "Au MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 2 OF 6 D-6 SAFETY VALVE 11911 MAIN STEAM HEADER SAFETY VALVE, SY DISCHARGE TO ATMOS 11548-CBM-064A 3 OF 6 D-6 SAFETY VALVE "C" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 4.00 2

4.00 2

4.00 2

4.00 2

4.00 2

4.00 2

B oc B

oc B

oc C

0 C

0 C

0

. EV FS ST VP EV FS ST VP EV FS ST VP SP SP SP 47 47 47 2-MS-SV-202A 2-MS-SV-2028 11548-CBM-064A 1 OF 6 E-6 SAFETY VALVE "Au MAIN STEAM HEADER SAFETY VALVE, SY DISCHARGE TO ATMOS 11548-CBM-064A 2 OF 6 D-5 SAFETY VALVE 11811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 6.00 2

6.00 2

C 0

SP C

0 SP

VALVE NUMBER 2_*MS*SV*202C 2*MS*SV-203A 2*MS*SV*203B 2*MS*SV-203C 2*MS*SV-204A 2*MS*SV*204B

  • 2*MS*SV*204C 2-MS*SV-205A.

2*MS*SV*205B 2*MS*SV*205C 2*MS*TV-201A VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO

-DRAWING SHEET DRWG NUMBER NUMBER COOR VALVE TYPE VALVE SIZE ASME TEST VALVE TEST CLASS.CAT POS TYPE TYPE 11548*CBM*064A 3 OF 6 D-6 SAFETY VALVE 11C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 1 OF 6 E-6. SAFETY VALVE 11A11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO.ATMOS 11548-CBM*064A 2 OF 6 D-6 SAFETY VALVE 11811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGEE TO ATMOS 11548*CBM-064A 3 OF 6 D-6 SAFETY VALVE 11C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 1 OF 6 E-6 SAFETY VALVE 11A11 MAiN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM-064A 2 OF 6 D-6 SAFETY VALVE 11811 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548*CBM*064A 3 OF 6 D-6 SAFETY VALVE "C" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548*CBM*064A 1 OF 6 E-5 SAFETY VALVE 11A" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548-CBM*D64A 2 OF 6 D-5 SAFETY VALVE 118" MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 11548~CBM*D64A 3 OF 6 D-5 SAFETY VALVE 11C11 MAIN STEAM HEADER SAFETY VALVE, SV DISCHARGE TO ATMOS 6.00 2

6.00 2

6.00 2

6.00 2

6.00 2

6.00 2

6.00 2

6.00 2

6.00 2

6.00 2

11548-CBM*D64A 1 OF 6 0*4 AO CHECK VALVE 30.00 2

11A11 MAIN S.TEAM HEADER TRIP VALVE C

0 C

0 C

0 C

0 C

0 C

0 C

0 C

0 C

0 C

0 B

C SP SP SP SP SP SP SP SP SP SP EV ST VP PAGE:

34 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*

CSV*

VNC-

VALVE NUMBER 2-MS-TV-201B 2-MS-TV-201C 2-MS-TV-209 2-HS-TV-210 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMaER COOR TYPE VALVE SIZE ASME CLASS 11548-CBM-064A 2 OF 6 C-4 AO CHECK VALVE 30.00 2

11B" MAIN STEAM HEADER TRIP VALVE 11548-CBM-064A 3 OF 6 C-4 AO CHECK VALVE 30.00 2

11C11 MAIN STEAM HEADER TRIP VALVE 11548-CBM-064A 4 OF 6 F-5 AO GATE

2.00 2

CAT B

B B

B ISO TEST VALVE POS TYPE C

C C

C TEST TYPE EV ST VP EV ST VP EV FS ST VP EV FS ST VP PAGE:

35 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2-MS-TV-220 11548-CBM-064A 4 OF 6 C-4 AO GATE MAIN STEAM SUPPLY TRIP VALVE TO TURBINE DRIVEN AUXILIARY FEEDWATER PUMP 3

B 0

EV ST VP

VALVE NUMBER 2-RC-160 VIRGINIA POWER COMPANY SURRY UNI.T 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRAWING NUMBER SHEET, DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASHE TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBM-0868 2 OF 3 D-7 CHECK. VALVE*

PRIMARY GRADE WATER SUPPLY TO PRESSURIZER RELIEF TANK 3.00 2

AC C

CIV CV LT PAGE:

36 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLO ALT REQ SHUT TEST v-csv-VNC*

44 2*RC*HCV*2556A 11548-CBM*086A 1 OF 3 E-8 AO PLUG LOOP FILL BOUNDARY VALVE 2.0.0 E

C VP 2-RC*HCV-2556B 11548*CBM-086A 2 OF 3 D-8 (10 PLUG LCX>P FILL BOUNDARY VALVE 2*RC*HCV-2556C

.11548-CBM-086A 3 OF 3 D-3 AO PLUG LOOP FILL BOUNDARY VALVE 2-RC*MOV-2535

  • 11548*CBM-086B 1 OF 3 E-4 MO GATE BLOCK VALVE FOR PRESSURIZER Poi.lER OPERATED RELIEF VALVE 2.00 1

2.00 3.00 E

C E

C B

. OC VP VP.

EV ST VP 2-RC*MOV-2536 11548*CBM-086B 1 OF 3 D-4 MO GATE BLOCK VALVE FOR PRESSURIZER POIJER OPERATED RELIEF VALVE 3.00 B

oc EV ST VP 2*RC*PCV*2455C 11548-CBM*086B 1 OF 3 D-3 AO PLUG PRESSURIZER POWER OPERATED PRESSURE CONTROL VALVE DISCHARGE TO PRESSURIZER RELIEF TANK 3.00 BC OC EV FS ST VP 34 7

7 2*RC*PCV*2456 11548*CBM-086B 1 OF 3 E-3 AO PLUG PRESSURIZER POWER OPERATED PRESSURE CONTROL VALVE DISCHARGE *TO PRESSURIZER RELIEF TANK 2*RC*SOV-200A1 11548-CBM-086A 3 OF 3 B-5 SO GATE REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY 3.00 1.00 BC.

OC B

OC EV FS ST VP EV FS ST.

VP 34 31 31

~4 7

7

VALVE NUMBER 2-RC*SOV-200A2 DRAWING SHEET NUMBER NUMBER 11548-CBM-086A 3 OF 3 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE*

ASME COOR TYPE SIZE CLASS CAT A-5 SO GATE 1.00 8

REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY ISO TEST VALVE POS TYPE oc TEST TYPE EV FS ST VP PAGE:

37 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC*

31 31 34 2-RC-SOV-200B1 11548-CBM-086A 3 OF 3 8-5 SO GATE REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY 1.00 B

oc EV FS ST VP 31 31 34 2-RC-SOV-20082 11548-CBM-086A 3 OF 3 A-5 SO GATE 2-RC-SV-2551A REACTOR VESSEL VENT LINE ISOLATION VALVE TO REFUELING CAVITY 11548-CBM-0868 1 OF 3 E-6 SAFETY VALVE PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK 1.00 6.00 B

oc C

0 EV FS ST VP SP 31 31 34 2-RC-SV*2551B 11548-CBM-0868 1 OF 3 E-5 SAFETY VALVE PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK 6.00 C

0 SP 2*RC-SV*2551C 11548-CBM-0868 1 OF 3 E-5 SAFETY VALVE PRESSURIZER SAFETY VALVE, SV DISCHARGE TO PRESSURIZER RELIEF TANK 6.00 C

  • 0 SP 2-RC*TV*2519A 11548-CBM-0868 2 OF 3 D-7 AO GATE PRIMARY GRADE WATER SUPPLY TO PRT*#2 RCP SEAL STANDPIPES & FLUSH CONNECT, OUT CONT ISO VLV 3.00 2

A C

CIV EV FS LT ST VP

VALVE NUMBER 2-RH-005 DRAIJING SHEET NUMBER NUMBER 11548-CBM-087A 1 OF 2 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRIJG VALVE VALVE ASHE

  • TEST COOR TYPE SIZE CLASS CAT* POS E*S CHECK VALVE 10.00 2

C QC "B" RHR PUMP DISCHARGE CHECK VALVE ISO VALVE TEST TYPE TYPE CV PAGE:

38 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ.SHUT TEST V-CSV-VNC-8 2-RH-011 2-RH-047 2-RH-FCV-2605 2-RH*HCV-2758 2-RH*MOV-200 11548-CBM-087A. 1 OF 2 E-7 CHECK VALVE "A" RHR PUMP DISCHARGE CHECK VALVE 11548-CBM-087A 2 OF 2 C-3 CHECK VALVE RHR DISCHARGE TO LOOP 2 COLD LEG CHECK VALVE 11548-CBM~087A 2 OF 2 C-7 AO BFLY RHR HEAT EXCHANGERS BYP~SS FLOIJ CONTROL VALVE 11548-CBM-087A 2 OF 2 C-5 AO BFLY RHR HEAT EXCHANGERS DISCHARGE FLOIJ CONTROL VALVE 11548*CBM-087A. 2 OF 2 E-3 MO GATE RHR SUPPLY ISOLATION TO REFUEL IJATER STORAGE TANK, OUTSIDE CONTAINMENT ISOLATION VALVE

  • 10.00 2

10.00 1

12.00 2

12.00 2

6.00 2

C QC C

0 B

C B

0 AE C

CIV CV CV EV FS ST EV FS ST LT 47 47 8

8 14 14 14 14 2-RH*MOV-2700 2-RH-MOV-2701 115~8-CBM-087A 1 OF 2 A-5 MO GATE RHR PUMP SUPPLY ISOLATION FROM RC LOOP 1 HOT LEG 11548-CBM-087A 1 OF 2 A-4 MO GATE RHR PUMP SUPPLY ISOLATION FROM RC LOOP 1 HOT LEG 2*RH*MOV-2720A 11548-CBM-087A 2 OF 2 C-3 MO GATE RHR RETURN ISOLATION TO 118 11 ACCUMULATOR DISCHARGE LINE 2-RH*MOV-2720B 11548-CBM-087A 2 OF 2 B-3 MO GATE RHR RETURN ISOLATION TO 11C11 ACCUMULATOR DISCHARGE LINE 14.00 14.00 10.00 10.00 B

0 B

0 B

0 B

0 EV ST VP EV ST VP EV ST VP EV ST VP 9

9 10 10

VALVE NUMBER 2-RH-RV-2721 DRAWING SHEET NUMBER NUMBER 1154S-CBM-087A 2 OF 2 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG

  • VALVE VALVE COOR TYPE SIZE D-4 RELIEF VALVE 3 *. 00 ASME CLASS 2

ISO TEST VALVE TEST CAT PCS TYPE TYPE C

0 SP RHR SYSTEM RELIEF VALVE PAGE:

39 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-

VALVE NUMBER 2-RL-003 2-RL-005 2-RL-013 2-RL-015 VIRGINIA PO\\JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11448-CBM-118A 3 OF 3 D-7 MAN DIAPHRAGM REFUELING PURIFICATION FROM RP PUMPS TO REACTOR CAVITY, OUTSIDE CONT ISOLATION VALVE 11448-CBM-118A 3 OF 3 D-6 MAN DIAPHRAGM REFUELING PURIFICATION FROM RP PUMPS TO REACTOR CAVITY, INSIDE CONT ISOLATION VALVE 11448-CBM-118A 3 OF 3 B-7 MAN DIAPHRAGM REFUELING PURIFICATION FROM REACTOR CAVITY TO RP PUMPS, INSIDE CONT ISOLATION VALVE 11448-CBM-118A 3 OF 3 B-7 MAN DIAPHRAGM REFUELING PURIFICATION FROM REACTOR *CAVITY TO RP PUMPS, OUTSIDE CONT ISOLATION VALVE VALVE ASME TEST SIZE CLASS CAT POS 3.00 2

AE C

3.00 2

AE C

3.00 2

AE C

3.00 2

AE C

ISO VALVE TYPE CIV CIV CIV CIV TEST TYPE LT LT LT LT PAGE:

40 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-39 39

VALVE NUMBER 2-RM-003 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAIJING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548-CBP-014B 1 OF 1 B-5 CHECK VALVE RETURN TO CONTAINMENT FROM RADIATION MONITOR-ING CABINET, INSIDE CONT !SOL CHECK VALVE 0.75 2

AC C

CIV CV LT PAGE:

41 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-44 2-RM-TV-200A 2-RM-TV-200B 11548-CBP-014B 1 OF 1 B-4 AO GATE RETURN ISOLATION FROM AIR RADIATION MONITOR TO CONTAINMENT, OUTSIDE CONT ISOLATION VALVE 11548-CBP-014B OF F-8 AO GATE SUPPLY !SOL TO AIR RAD MONITOR FROM CONTAIN-MENT VENT DUCT, OUTSIDE CONT ISOLATION VALVE 0.75 2

A C

0.75. 2 A*

C CIV CIV EV FS LT ST VP EV FS LT ST VP 34 34 2-RM-TV-200C 11548-CBP-014B 1 OF 1 E-8 AO GATE SUPPLY !SOL TO AIR RAD MONITOR FROM.CONTAIN-MENT VENT DUCT, l~SIDE CONT ISOLATION VALVE 0.75 2

A C*

CIV EV FS LT ST VP 34

VALVE NUMBER 2-RS-011 2-RS-017 VIRGINIA POl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMBER COOR TYPE SIZE CLASS CAT 11548-CBM-0848 2 OF 2 E-5 CHECK VALVE 10.00 2

AC "B" OUTSIDE RECIRC SPRAY PUMP INSIDE CONTAINMENT ISOLATION CHECK VALVE TEST POS oc 11548-CBM-084B 2 OF 2 D-5 CHECK VALVE 10.00 2

AC OC "A" OUTSIDE RECIRC SPRAY PUMP INSIDE CONTAINMENT ISOLATION CHECK VALVE ISO VALVE TYPE CIV CIV TEST TYPE CV LT CV LT PAGE:

42 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-43 43 2-RS-046 2-RS-053 11548-CBM-084B 2 OF 2 A-6.

MAN GATE OUTSIDE RECIRC SPRAY PUMP*SUCTION BYPASS LINE ISOLATION VALVE 11548-CBM-0848 2 OF 2 B-6 MAN GATE OUTSIDE RECIRC SPRAY PUMP SUCTION BYPASS LINE ISOLATION VALVE 2

AE C

2 AE C

CIV LT 39 CIV LT 39 2-RS*MOV-255A 2-RS*MOV*255B 2-RS*MOV-256A 2-RS*MOV*256B 11548-CBM-084B 2 OF 2 B-6 MO PLUG "A" OUTSIDE RECIRC SPRAY PUMP SUCTION ISOLAT VALVE FROM CONTAINMENT SUMP 11548-CBM-084B 2 OF 2 B-6 MO PLUG "B". OUTSIDE REC I RC SPRAY PUMP SUCTION ISOLAT VALVE FROM CONTAINMENT SUMP 11548-CBM-084B 2 OF 2 D-6 MO BFLY 11A11 OUTSIDE RECIRC SPRAY PUMP DISCHARGE ISO*

LATION, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*0S4B 2 OF 2 E-6 MO BFLY "A" OUTSIDE RECIRC SPRAY PUMP DISCHARGE ISO*

LATION, OUTSIDE CONTAINMENT ISOLATION VALVE 12.00 2

12.00 2

10.00 2

10.00 2

A CC A

CC A

CC A

CC CIV EV LT ST VP CIV EV CIV CIV LT ST

. VP EV LT ST VP EV LT ST VP 39 39 1

VALVE NUMBER 2-RT-02 2-RT-06 2-RT-21 2-RT-25 2-RT-40 2-RT-44 VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAlollNG NUMBER SHEET DRlolG VALVE NUMBER COOR TYPE VALVE.

ASME TEST VALVE TEST SIZE CLASS CAT POS TYPE TYPE 11548-CBM-124A 1.OF 4. E-7 MANUAL GLOBE STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 1 OF 4 E-6 MANUAL GLOBE STEAM GENERATOR RECIRCULATION OUTSIDE

,CONTAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 E-7 MANUAL GLOBE STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 2 OF 4 E-6 MANUAL GLOBE

'STEAM GENERATOR RECIRCULATION OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 3 OF 4 E-7 MANUAL GLOBE STEAM GENERATOR RECIRCULATION INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-124A 3 0: 4 E-6 MANUAL GLOBE STEAM GENERATOR RECIRCULATION OUTSIDE CONTAINMENT ISO~ATION VALVE 3_00 2

AE C

LT 3.00 2

  • AE C

LT 3.00 2

AE C

LT 3.00 2

AE C

LT 3.00 2

AE C

LT 3.00 2

AE C

LT PAGE:

43 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V-CSV-VNC-

VALVE NUMBER 2-SA-081 2-SA-082 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM-075E 1 OF 1 B-6 MAN GATE SERVICE AIR SUPPLY TO UNIT 1 CONTAINMENT, INSIDE CONTAINMENT ISOLATION VALVE VALVE SIZE*

2.00 ASHE CLASS CAT 2

AE TEST POS C

11548-CBM-O?SE 1 OF*1 B-6 MAN GATE SERVICE AIR SUPPLY TO UNIT 1 CONTAINMENT, OUTSIDE CONTAINMENT ISOLATION VALVE 2.00 2

AE C

ISO VALVE TEST TYPE TYPE CIV LT CIV LT PAGE:

44 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-

VALVE NUMBER 2-SI-025 DRAWING SHEET NUMBER NUMBE~

11548-CBM*089A 1 OF 3 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COQR TYPE SIZE CLASS CAT E-5 CHECK VALVE 8.00 2

C RWST SUPPLY CHECK VALVE TO CHARGING PUMP SUCTION HEADER ISO TEST VALVE TEST POS TYPE TYPE oc CV

. PAGE:

45 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-28 2-Sl-032 2-Sl-046A 2-Sl-046B 11548-CBM-0898 1 OF 4 E-3 MAN GLOBE ACCUMULATOR MAKEUP LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*089A 1 OF 3 A-3 CHECK VALVE RWST SUPPLY CHECK VALVE TO 11A11 LOW HEAD SI PUMP SUCTION 11548*CBM*089A 1 OF 3 B-3 CHECK VALVE RWST SUPPLY CHECK VALVE TO "B" LOW HEAD SI PUMP SUCTION 1.00 2

12.00 2

12.00 2

AE C

CIV LT C

0 CV 21 C

0 CV 21 2-Sl-047 2-Sl~OSO 2*Sl*053 11548-CBM-089A 1 OF 3 B-5 CHECK VALVE 11811 LOIJ HEAD SI PUMP SUCTION CHECK VALVE FROM CONTAINMENT SUMP 11548*CBM*089A 1 OF 3 C-4 CHECK VALVE 11811 LO'J HEAD_ SI PUMP DISCHARGE CHECK VALVE 11548-CBM-089A 2 OF 3 8*4 CHECK VALVE NBN LO'J HEAD SI PUMP MINIMUM FLOW/TEST LINE DISCHARGE CHECK VALVE 12.00 2

10.00 2

_ 2.00 2

C 0

CV 20 C

oc

  • CV 21 C

0 CV 2*Sl*OS6 2-Sl-061 2*Sl*073 2-SI -079 -

11548*CBM*089A 1 OF 3 B-7 CHECK VALVE "A" LOW HEAD SI PUMP SUCTION CHECK VALVE FROM CONTAINMENT SUMP 11548*CBM*089A 2 OF 3 8*5 CHECK VALVE "A" LO'J.HEAD SI PUMP MINIMUM FLOW/TEST LINE DISCHARGE CHECK VALVE 11548*CBM*089A. 2 OF 3 E*7 MAN GLOBE ACCUMULATOR TEST LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*089B 4*0F 4 F-7 CHECK VALVE RC_S COLD LEG SI ADMISSION CHECK VALVE 12.00 2

2.00 2

0.75 2

6.00 1

C 0

C 0

AE C

CIV AC OC PIV CV CV LT CV LT 20 27

VALVE NUMBER 2-SI-082 2-SI-085 DRAWING SHEET NUMBER NUMBER 11548-CBM-089B 4 OF 4 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT E-7 CHECK VALVE 6.00 AC RCS COLD LEG SI ADMISSION CHECK VALVE TEST POS oc 11548-CBM-089B 4 OF 4. D-7 CHECK VALVE 6.00 AC OC RCS COLD LEG SI ADMISSION CHECK VALVE ISO VALVE TYPE PIV PIV TEST TYPE CV LT CV LT PAGE:

46 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-27 27

*-----------------------------------------------------------------------------------*-**--* 1 2-SI-088 11548-CBM-089B 4 Of 4 D-7 CHECK VALVE 6.00 C

OC CV 27 RCS HOT LEG SI ADMISSION CHECK VALVE I

2-SI-091 2-SI-094.

2-SI-107 2-SI-109 2*SI-128 2-SI-130 11548-CBM-089B 4 OF 4 C-7 CHECK VALVE RCS HOT LEG SI ADMISSION CHECK VALVE 11548-CBM-089B 4 OF 4 B-7 CHECK VALVE RCS HOT LEG SI ADMISSION CHECK VALVE 6.00 6.00 11548-CBM-089B 1 OF 4 B-7 CHECK VALVE 12.00 "A" ACCUMULATOR DISCHARGE CHECK VALVE 11548-CBM-0898 1 OF 4 B-8 CHECK VALVE "A" ACCUMULATOR COLD LEG ADMISSION CHECK VALVE 11548-CBM-089B 2 OF 4 B-6 CHECK VALVE 11811 ACCUMULATOR DISCHARGE CHECK VALVE 11548-CBM-089B 2 OF 4 B-7 CHECK VALVE 11811 ACCUMULATOR COLD LEG ADMISSION CHECK VALVE 12.00 12.00 12.00 C

oc CV 27 C

oc CV 27 C

0 CV 26 C

oc CV 26 29 C

0 CV 26 C

oc CV 26 29 2*SI*145 11548-CBM-089B 3 OF 4 B-5 CHECK VALVE "C" ACCUMULATOR DISCHARGE CHECK VALVE "C" ACCUMULATOR COLD LEG ADMISSION CHECK VALVE 12.00 C

0 CV 26

VALVE NUMBER 2-SI-150 DRAWING SHEET NUMBER NUMBER 11548-CBM*OS9A 3 OF 3 VIRGINIA POIJER COMPANY.

SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE

. DRWG VALVE VALVE ASHE COOR TYPE SIZE CLASS CAT F-6 MAN GLOBE

  • 0.75 2

AE BORON INJECTION TANK BYPASS LINE ISOLATION VALVE - TO RCS COLD LEG ISO TEST VALVE pos TYPE C

CIV TEST TYPE LT PAGE:

47 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV*

VNC*

39

~-------------------------------------------------------

2-SI-174 11548-CBM*089A. 3 OF 3 D-6 MAN GLOBE HIGH HEAD SAFETY INJECTION TO RCS 0.75 2

AE C

CIV LT 39 2-SI~201 11548-CBM-089A 1 OF 3 C-7 CHECK VALVE RWST SUPPLY CHECK VALVE TO LHSI PUMP SEALS 0.75 2

C C

CV 2-Sl-207 1154S*CBM-089A 1 OF 3 C-5.

CHECK VALVE RWST SUPPLY CHECK VALVE TO LHSI PUMP SEALS 0.75 2

C.

C CV 2-Sl *224 2-Sl-225 11548-CBM-089B 4 OF 4 F-3 CHECK VALVE HIGH HEAD SI FROM CHARGING PUMPS TO.RCS COLD LEGS, INSIDE CONT CHECK VALVE 11548-CBM-089B 4 OF 4 E-3 CHECK VALVE HIGH HEAD SI FROM.CHARGING* PUMPS TO RCS COLD.

LEGS, INSIDE CONT CHECK VALVE 3.00

.2 3.00 2

C 0

CV

. 27 C

0 CV

27.

2-Sl-226 2-Sl-227 2-Sl-228 2-SI-229 1154S*CBM-089B 4 OF 4 C-3 CHECK VALVE HIGH HEAD SI FROM CHARGING PUMPS TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 11548-CBM*OS9B 4 OF 4 C-3 CHECK VALVE HIGH HEAD SI FROM CHARGING PUMPS TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 11548-CBM*OS9B 4 OF 4 B-3 CHECK VALVE LOW HEAD SI FROM LHSI PUMP TO RCS HOT LEGS, INSIDE CONT CHECK VA~VE 11548-CBM-089B 4 OF 4 B-3 CHECK VALVE LOW HEAD SI FROM LHSI PUMP TO RCS HOT LEGS, INSIDE CONT CHECK VALVE 3.00 2

3.00 2

6.00 2

6.00 2

C 0

CV 27 C

0 CV 27 C

0 CV 27 C

0 CV 27 2:;;:23s*---* -*--;;s4~:~;~:c;~9;** -4*c;;*4 ** ;:;** ~~~~~-~~~~~----* **2:c;c;** -------- ~ ---*c; * -----------~~-----* 2; * -------------I.*

2-Sl-236 HIGH HEAD SI TO RCS COLD LEG, INSIDE MISS.ILE BARRIER CHECK VALVE 11548-CBM-089B 4 OF 4 E-7 CHECK VALVE HIGH HEAD SI TO RCS COLD LEG, INSIDE MISSILE BARRIER CHECK VALVE 2.00 C

0 CV 27

-VALVE NUMBER 2-SI-237 2-SI-238 2-Sl-239 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE ISO DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548*CBM-089B 4 OF 4 D*7 CHECK-VALVE HIGH HEAD SI TO RCS COLD LEG, INSIDE MISSILE BARRIER CHECK VALVE 11548-CBH*089B 4 OF 4 D-7 CHECK VALVE LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 11548-CBH-089B 4 OF 4 C-7 CHECK VALVE LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 2.00 6.00 6.00 C

C C

0 CV OC CV QC CV PAGE:

48 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-CSV-VNC-27 27 27 2-SI-240 2-SI-241 2-SI-242 2-SI-243 2-Sl-304 11548-CBH-089B 4 OF 4 B-7 CHECK VALVE LOW HEAD SAFETY INJECTION SUPPLY CHECK VALVE TO RCS HOT LEG 11548-CBH-089B 4 OF 4 F-7 CHECK VALVE LOW HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 11548-CBM-089B 4 OF 4 E-7 CHECK VALVE LOW HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 11548-CBM-089B 4 OF 4 D-7 CHECK VALVE LOW.HEAD SI TO RCS COLD LEG ISOLATION CHECK VALVE 11548-CBH*089B 1 OF 4 F-3 CHECK VALVE NITROGEN SUPPLY TO ACCUMULATORS, INSIDE CONTAINMENT ISOLATION CHECK VALVE 6.00 6.00 6.00 1

6.00 1.00 2

c OC AC OC AC OC AC OC AC C

PIV PIV CV CV LT CV LT PIV CV CIV

. LT CV LT 27 27 27 27 44 2-SI-321 2-SI *322 2-SI-327.

11548-CBM-.089A 1 OF 3 A-5 MAN GLOBE LOW HEAD SI FROM CHARGING HEADER TO RCS COLD LEGS, BYPASS LINE ISOLATION VALVE 11548-CBM-089A 1 or 3 B-7 MAN GLOBE LOW HEAD SI FROM CHARGIN~ HEADER TO RCS COLD LEGS, BYPASS LINE ISOLATION VALVE 11548-CBM-089A 1 OF 3 C-6 CHECK VALVE "A" LOW HEAD SI PUMP DISCHARGE CHECK VALVE 0.75 2

0.75 2

10.00 2

AE C

CIV LT 39 AE C

CIV LT 39 C

oc CV 21

VALVE NUMBER 2-Sl-400 DRAWING SHEET NUMBER NUMBER 11548-CBH-089A 1 OF 3 VIRGINIA POIJER-COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE.

ASME COOR TYPE SIZE

.CLASS CAT E-4 CHECK VALVE 10.00 2

C RWST SUPPLY CHECK VALVE TO CHARGING PUMP SUCTION HEADER ISO TEST VALVE TEST POS TYPE TYPE 0

CV PAGE:

49 OF 63 REVISION: 03 DATE: 3/19/92 NC REL* COLD ALT REQ SHUT TEST v-csv-VNC-28 2-SI-MOV-2842 11548-CBH-089A 3 OF 3 D-7 MO GATE HIGH HEAD SI_ FROM CHARGING HEADER TO RCS COLD LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE 3.Cio 2

  • A OC.

CIV EV LT ST VP 25 r

2-SI-MOV-2860A 11548-CBM-089A 1 OF 3 B-7 MO GATE

~--------------------------------------------

"A" LOW HEAD SI PUMP SUCTION ISOLATION FROM CONTAINMENT SUMP 2-SI-MOV-2860B 11548-CBM-089A 1 OF 3 B-5 MO GATE 11B" LOW HEAD SI PUMP SUCTION ISOLATION FROM CONTAINMENT SUMP 12.00 2

A 12.00 2

A 0

CIV 0

CIV EV LT ST VP EV LT ST VP 39 39 2-SI-MOV~2862A 11548-CBM-089A 1 OF 3 A-3 MO GATE 12.00 2

"A" LOW HEAD SI PUMP SUCTION FROM RWST 2-SI-MOV-2862B 11548-CBM-089A 1 OF 3 B-3 HO GATE 12.00 2

11611 LOW HEAD SI PUMP SUCTION FROM RWST B

C B

C EV ST VP EV

.ST VP 2-Sl*MOV*2863A 11548-CBM-089A 2 OF 3 C-5 HO GATE 11A11 LO',I HEAD SAFETY INJECTION PUMP SUPPLY.

ISOLATION TO CHARGING PUMPS 8.00 2

B oc EV ST VP 2*Sl*HOV*2863B 11548-CBH-089A 2 OF 3 D-3 MO GATE "B" LOW HEAD SAFETY INJECTION PUMP SUPPLY ISOLATION TO CHARGING PUMPS 8.00 2

B oc EV ST VP

VALVE NUMBER DRAWING NUMBER VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASME CLASS CAT 2-SI-MOV-2864A 11548-CBM-089A 2 OF 3 0-6 MO GATE 10.00 2

B "A" LOW HEAD SI PUMP COLD LEG DISCHARGE STOP VALVE TEST POS oc ISO VALVE TEST TYPE TYPE EV ST VP PAGE:

50 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-Sl~MOV-2864B 11548-CBM-089A 2 OF 3 D-4 MO GATE "B" LOW HEAD SI PUMP COLD LEG DISCHARGE STOP VALV!;

2-SI-MOV-2B65A 11548-CBM-089B 1 OF 4 C-7 MO GATE "A" ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 10.00 2

12.00 2

B oc B

oc EV ST VP EV ST VP 2:;;:;~~=2~~;;---;;;~~=~;;:~~~;---2-~;-~--~=~---;;-~;~------- --;2:~~---2------;----~~-----------~~---------------------- I "B" ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 2-SI-MOV-2865C 11548-CBM-089B 3 OF 4 C-5 MO GATE 11C11 ACCUMULATOR DISCHARGE ISOLATION VALVE TO RCS COLD LEG 2-SI-MOV-2867C 11548-CBM-089A 3 OF 3 F-6 MO GATE BORON INJECTION TANK OUTLET TO RCS COLD LEG, OUTSIDE CONTAINMENT ISOLATION VALVE 12.00 2

3.00 2

B oc A

.OC CIV ST VP EV ST VP EV LT ST VP 18 39 2-SI-MOV-28670 11548-CBM-089A 3 OF 3 E-6 MO GATE BORON INJECTION TANK OUTLET TO RCS COLD LEG, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2B69A 11548-CBM-089A 3 OF 3 C-7 MO GATE HIGH HEAD SI FROM CHARGING HEADER TO RCS HOT LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE 3.00 2

A oc 3.00 2

A oc CIV CIV EV LT.

ST VP EV LT ST VP 18 39 25 39

VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE VALVE NUMBER 2-Sl*MOV-28698 DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548-CBM-089A 3 OF 3 E-4 MO GATE HIGH HEAD SI FROH CHARGING HEADER TO RCS HOT LEGS, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2885A 11548-CBM-089A 2 OF 3 B-5 MO GATE "A" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2-SI-MOV*2885B 11548-CBM-089A 2 OF 3 B-4 MO GATE 118" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2-SI-MOV-2885C 11548-CBM-089A 2 OF 3 B-4 MO GATE 11811 LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION 2*SI*MOV-2885D 11548-CBM-089A 2 OF 3 B-5 MO GATE "A" LOW HEAD SI PUMP MINIMUM FLOW/TEST LINE ISOLATION VALVE ASME SIZE CLASS CAT 3.00 2

A 2.00 2

, B 2.00 2

B 2.00 2

B 2.00 2

B TEST POS oc C

C C

C ISO VALVE TYPE CIV TEST TYPE EV LT ST VP EV ST VP EV ST VP EV ST VP EV ST VP PAGE:

51 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-o 25 2-S1*MOV-2890A 11548-CBM-089A 2 OF 3 C-7 MO GATE "A" LOW HEAD SI PUMP HOT LEG DISCHARGE STOP

_ VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2*Sl*MOV*2890B 11548-CBM-089A 2 OF 3 E-7 MO GATE 11811 LOW HEAD SI PUMP HOT LEG DISCHARGE STOP VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 2-SI-MOV-2890C 11548-CW4-089A 2 OF 3 D-7 MO GATE LOW HEAD SI PUMPS COLD LEG DISCHARGE STOP VALVE, OUTSIDE CONTAINMENT ISOLATION VALVE 10.00 2

A 10.00 2

A 10.00 2

A QC CIV QC CIV QC CIV EV LT ST VP EV LT ST VP EV LT ST VP 17

VALVE NUMBER 2*Sl*RV-2845A 2*Sl*RV-2845B 2*Sl*RV*2845C VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548*CBM-089A 2 OF 3 E-6 RELIEF VALVE "A" LOW HEAD SI PUMP DISCHARGE RELIEF VALVE, RV DI SCHA.RGE TO SAFEGUARDS AREA SUMP 11548-CBM-089A 2 OF 3 E-5 RELIEF VALVE LOW HEAD SI HEADER TO COLD.LEG RELIEF VALVE, RV DISCHARGE TO SAFEGUARDS AREA SUMP 1154S*CBM*089A 2 OF 3 E-5 RELIEF VALVE

  • 11811 LOW HEAD SI PUMP DISCHARGE RELIEF VALVE,
  • RV DISCHARGE TO SAFEGUARDS AREA SUMP VALVE ASHE SIZE CLASS CAT I 1.00 2

C 1.00. 2 C

1.00 2

C ISO TEST VALVE TEST POS TYPE TYPE 0

SP 0

SP 0

SP PAGE:

52 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*

csv-VNC*

2*Sl*TV*200 2-Sl*TV*201A 11548*CBM*089A 3 OF 3* 8*7 AO GATE NITROGEN SUPPLY TO ACCUMULATORS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*089B 1 OF 4 C*.3 AO GATE ACCUMULATORS TO WASTE GAS CHARCOAL FILTERS,*

INSIDE CONTAINMENT ISOLATION VALVE 1.00 2

1.00 2

A C

A C

CIV CIV EV FS LT ST VP EV FS LT ST VP 34

. 2*SI *TV*201B 2*Sl*TV-202A 11548*CBM*089B

  • 1 OF 4 B-2 AO GATE ACCUMULATORS TO WASTE GAS CHARCOAL FILTERS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*089k 1 OF 3 E*7 AO GATE UNIT 1 RWST TO UNIT 2 RWST CROSS TIE 1.00 2

8.00 2

A C

B 0

CIV

  • Ev FS LT ST VP EV FS ST VP 34 2*Sl*TV*202B 11548*CBM*089A 1 OF 3 E*7 AO GATE 8.00 2

UNIT 1 RWST TO UNIT 2 RWST CROSS TIE B

0 EV FS

. ST VP

VALVE NUMBER 2*SS*TV-200A

~--

DRAWING SHEET NUMBER NUMBER 11548-CBM-082A 2 OF 3 VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT F-7 SO GATE

<i.375 1

A PRESSURIZER LIQUID SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLAllON VALVE ISO TEST VALVE TEST POS TYPE TYPE C

CIV EV FS LT ST VP PAGE:

53 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2-SS-TV-200B 2-SS-TV-201A 11548-CBM-082A 2 OF 3 F*6 SO GATE PRESSURIZER LIQUID SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 0.375 11548-CBM-082A 2 OF 3 E-7 SO GATE 0.375 PRESSURIZER.VAPOR SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLATION VALVE A

A C

CIV C

CIV EV FS LT ST VP EV FS LT ST VP 34 34

* ------------------~-----------------------------------------------------~-----------------------------

2-SS*TV-201B

  • 2-SS-TV-202A 2*SS*TV*202B 11548-CBM-082A 2 OF 3 E-6 SO GATE PRESSURIZER VAPOR SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOL~TION VALVE 11548-CBM-082A 2 OF 3 D-7 SO GATE REACTOR COOLANT COLD LEGS SAMPLE HEADER, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM-082A 2 OF 3 D-6 SO GATE REACTOR COOLANT COLD LEGS SAMPLE HEADER, OUTSIDE CONTAINMENT ISOLATION VALVE RHR SAMPLE HEADER, INSIDE CONTAINMENT ISOLA*

TION VALVE 0.375 1

0.375

1.

0.375 A

C A

C A

C CIV EV FS LT ST VP CIV EV CIV FS

. LT ST VP EV FS LT ST VP 34 34 34 I

VALVE NUMBER 2-SS*TV-203B 2-SS-TV-204A

  • VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE 11548*CBM*082A 2 OF 3 F-6 SO GATE RHR SAMPLE HEADER, OUTSIDE CONTAINMENT ISOLA-TION VALVE 11548*CBM*082A 2 OF 3 D-.7 SO GATE PRESSURIZER RELIEF tANK GAS SPACE SAMPLE LINE, INSIDE CONTAINMENT ISOLATION VALVE VALVE SIZE 0.375 ASME CLASS 2

0.375 2

CAT AE A

ISO TEST VALVE POS TYPE C

CIV C

CIV TEST TYPE LT VP EV FS LT ST VP PAGE:

54 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*

34

.-------------------------------------~--------------------------------------------------

2*SS*TV-204B 2*SS*TV*206A 2*SS*TV*206B 11548*CBM-082A 2 OF 3 C-6 SO GATE

. PRESSURIZER RELIEF TANK GAS SPACE SAMPLE LINE, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM*082A 2 OF 3 E-7 SO GATE REACTOR COOLANT HOT LEGS SAMPLE HEADER, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBM*082A 2 OF 3 E-6 SO GATE REACTOR COOLANT HOT LEGS SAMPLE HEADER, OUT*

SIDE CONTAINMENT ISOLATION VALVE 0.375 2

A 0.375 A

0.375 A

C CIV C

CIV C

CIV EV FS LT ST VP EV FS LT ST VP EV FS LT ST VP 34 34 34

VALVE NUMBER 2-SV-TV-202A DRAWING SHEET NUMBER NUMBER 11548-CBM-066A. 2 OF 3 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE.

ASME COOR TYPE SIZE CLASS CAT E-4 AO GATE 6.00 2

A CONDENSER AIR REMOVAL DISCHARGE TO CONTAIN-MENT, OUTSIDE CONTAINMENT ISOLATION VALVE ISO TEST VALVE TEST POS TYPE TYPE C

CIV EV FS LT ST VP PAGE:

55 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-

VALVE NUMBER 2-SW-108 2-SW-113 2-SY-130 VIRGINIA PQl,IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAYING NUMBER SHEET DRYG VALVE NUMaER COOR TYPE 11548-CBM-071B 1 OF 2 B-4 CHECK VALVE CHARGING PUMP SERVICE YATER PUMP CHECK VALVE 11548-CBM-071B 1 OF 2 B-7 CHECK VALVE CHARGING PUMP SERVICE WATER PUMP CHECK VALVE 11548-CBM-071B 1 OF 2 D-7 CHECK VALVE CIRCULATING WATER TO DISCHARGE TUNNEL CHECK VALVE VALVE SIZE 2.00 ASME CLASS 3

2.00 3

2.00 3

CAT C

C C

TEST POS oc oc 0

ISO VALVE TEST TYPE TYPE CV CV CV PAGE:

56 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-2-SY-206 11548-CBM-071A 3 OF 3. E-8 MAN GATE CONTAINMENT ISOLATION VALVE FOR SERVICE YATER ORAi NS TO HEAT EXCHAIIGER 2.00 2

AE C

CIV LT 2-SY-208 2-SY-246 2-SY-247 2-SY-248 11548-CBM-071A 3 OF 3 E-8 MAN GATE CONTAINMENT ISOLATION VALVE FOR SERVICE YATER DRAINS TO HEAT EXCHANGER 11548-CBM*071A 3 OF 3 D-8 CHECK VALVE RECIRCULATION SPRAY.HEAT EXCHANGER SERVICE YATER RETURN VENT VALVE 11548-CBM-071A 3 OF 3 D-7 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 11548-CBM*071A. 3 OF 3 D-7 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE YATER RETURN VENT VALVE 2.00 2

3.00 NC 3.00 3

3.00 NC AE C

CIV LT C

0 CV C

0 CV 46 C

0 CV

.------------------------------------------. ----------------------------------------------------------------------~

2-SY-249 2-SY-250 11548-CBM-071A 3 OF 3 D-6 CHECK VALVE RECIRCULATION.SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 11548-CBM-071A

~ OF 3 D-6 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER RETURN VENT VALVE 3.00 3

3.00 NC C

0 CV 46 C

0 CV 2-SY-251 11548-CBM*071A 3*0F 3 D-6 CHECK. VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE

~ATER SUPPLY VENT VALVE 3.00 3

C 0

CV 46 2-SW-252 11548-CBM-071A 3 OF 3 D-5 CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE YATER RETURN VENT V~LVE 3.00 NC C

0 CV

VALVE NUMBER 2*SW*253 2*SW*442 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING SHEET DRWG VALVE NUMBER NUMBER COOR TYPE 11548*CBM*071A 3 OF 3 D*S CHECK VALVE RECIRCULATION SPRAY HEAT EXCHANGER SERVICE WATER SUPPLY VENT VALVE 11548*CBM-071B 1 OF 2 B-4 CHECK VALVE CHARGING PUMP SERVICE WATER PUMP DISCHARGE CHECK VALVE VALVE ASME SIZE CLASS CAT 3.00 3

C 2.00 3

C ISO TEST VALVE TEST POS TYPE TYPE 0

CV 0

CV PAGE:

57 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V*

csv-VNC*

46

*-----------------------------------------------------------------------------------------------------------~

2°SW*445 2*SW-MOV*201A 2*SW*MOV*201B 2-SW*MOV*202A 11548*CBM*071B 1 OF 2 8*6 CHECK VALVE CHARGING PUMP SERVICE WATER PUMP DISCHARGE CHECK VALVE 11548-CBM*071A 3 OF 3 8*4 MO BFLY BEARING COOLING WATER HEAT EXCHANGER

  • ISOLATION VALVE 11548*CBM*071A 3,0F 3 B-4 MO BFLY BEARING COOLING WATER HEAT EXCHANGER ISOLATION VALVE 11548*CBM*071A 2 OF 3 D*6 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO COMPONENT COOLING HEAT EXCHANGERS 2.00 3

C 36.00 3

B 36.00 3

B 42.00 3

B 0

C C

C CV EV ST VP EV ST VP EV ST VP 2*S\\J*MOV*202B 2*SW*MOV*203A 11548*CBM*071A 2 OF 3 D*S MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO COMPONENT COOLING HEAT EXCHANGERS 11548*CBM-071A 3 OF 3 8*8 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 42.00 3

30.00 3

B C

B 0

EV ST VP EV ST VP 2*SW*MOV*203B 11548*CBM*071A 3 OF 3 B*B MO BFLY*

SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 30.00 3

B 0

EV ST VP

VALVE NUMBER 2-SW-MOV-203C 2-SW-HOV-203D 2-SW-HOV-204A VIRGINIA PO\\IER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 1154S-CBM-071A 3 OF 3 B-3 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 1154S-CBM-.071A 3 OF 3 B-2 MO BFLY SERVICE WATER HEADER SUPPLY ISOLATION TO RECIRC SPRAY HEAT EXCHANGERS 1154S-CBM-071A 3 OF 3 D-7 MO BFLY SERVICE WATER SUPPLY TO 11A11 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE VALVE SIZE 30.00 ASME CLASS 3

30.00 3

24.00 3

CAT B

B B

ISO TEST VALVE POS TYPE 0

0 QC TEST TYPE EV ST VP EV ST VP EV ST VP PAGE:

  • sa OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-. VNC-
  • 2-SW-HOV-204B 2-SW-HOV-204C 1154S-CBH-071A 3 OF 3 D-6 MO BFLY SERVICE WATER SUPPLY TO 11B" RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3 OF 3 D-5 MO BFLY SERVICE WATER SUPPLY TO "C" RECIRC SPRAY HEAT EXCHANGER, OUTSID.E CONT ISOLATION VALVE 24.00 3

24.00 3

B QC B

oc EV ST VP EV ST VP 2-SW-HOV-204D 2-SW-HOV-205A 2-SW-HOV-205B 115~8-CBH-071A 3 OF 3 D-4 HO BFLY SERVICE WATER SUPPLY TO 110 11 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3 OF 3 D-8 MO BFLY SERVICE WATER RETURN FROM "Ai, RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3 OF 3 D-7 MO BFLY SERVICE WATER RETURN FROM "B" RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE 24.00 3

B 24.00 3

B 24.00 3

B oc QC oc EV ST VP EV ST VP EV ST VP

VALVE NUMBER 2-SW*MOV-205C 2-SW*MOV-205D VIRGINIA POIJER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE 11548-CBM~071A 3 OF 3 D-6 MO BFLY SERVICE lolATER RETURN FROM 11C11 RECIRC SPRAY HEAT EXCHANGER,*OUTSIDE CONT ISOLATION VALVE 11548-CBM-071A 3-0F 3 D-5 MO BFLY SERVICE WATER RETURN FROM 11011 RECIRC SPRAY HEAT EXCHANGER, OUTSIDE CONT ISOLATION VALVE VALVE SIZE 24.00 ASHE CLASS 3

24.00 3

CAT B

B 2-SW*TCV-208A

.11548-CBM-071B 1 OF 2 E-7 AO GATE 1.5 3

B SERVICE WATER TO CH.ARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE ISO TEST VALVE POS TYPE oc oc 0

TEST TYPE EV ST VP EV ST VP EV FS ST PAGE:

59 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-47 2-SW-TCV-208B 2-SW-TCV-208C 11548-CBM-071B 1 OF 2 E-5 AO GATE SERVICE WATER TO CHARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE 11548-CBM-071B 1 OF 2 E-4 AO GATE SERVICE WATER TO CHARGING PUMP LUBE OIL COOLER TEMPERATURE CONTROL VALVE 1.5 3

1.5 3

B 0

B 0

EV FS ST EV FS ST 47 47

VALVE NUMBER 2-VA-001 2-VA-009 VIRGINIA PO'JER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM* VALVE TABLE ISO DRAIJING NUMBER SHEET DRIJG VALVE NUMBER COOR TYPE VALVE SIZE ASME TEST VALVE TEST CLASS CAT POS TYPE TYPE 11548*CBM-083B 3 OF 3 F-3 MAN GATE VENT LINE FROM PRIMARY VENT POT, OUTSIDE CONTAINMENT ISOLATION VALVE 11548*CBM-083B 3 OF 3 F-4 MAN GATE VENT LINE FROM PRIMARY VENT POT, INSIDE CONTAINMENT ISOLATION VALVE 2.00 2

2.00 2

  • AE C

CIV LT AE C

CIV LT PAGE:

60 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REC SHUT TEST V*

CSV-VNC-

VALVE NUMBER 2*VG*TV-209A DRAWING SHEET NUMBER NUMBER 11548-CBH-083B 1 OF 3 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRWG VALVE VALVE ASME COOR TYPE SIZE CLASS CAT E-3 AO GATE 2.00 2

A VENT LINE !SOL FROM PRIMARY DRAINS TRANSFER TANK TO GAS STRIPPERS, INSIDE CONT !SOL VLV ISO TEST VALVE TEST POS TYPE TYPE C

CIV EV FS LT ST VP PAGE:

61 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC-34 2*VG-TV-209B 11548-CBH-083A 2 OF 2 F-3 AO GATE VENT LINE !SOL FROM PRIMARY DRAINS TRANSFER TANK TO GAS STRIPPERS, OUTSIDE CONT !SOL VLV 2.00 2

A C

CIV EV FS LT ST VP 34

VALVE NUMBER VIRGINIA POYER COMPANY SURRY UNIT 2 SECOND INSPECTI~ INTERVAL INSERVICE TESTING PROGRAM - VALVE TABLE DRAWING SHEET DRWG VALVE VALVE ASHE NUMBER NUMF,ER COOR TYPE SIZE CLASS CAT 1154S-CBM-066A 2 OF 3 F-4 CHECK VALVE 6.00 2

AC CONDENSER AIR REMOVAL DISCHARG TO CONTAINMENT INSIDE CONTAIN ISOLATION CHECK VALVE ISO TEST VALVE POS TYPE C

CIV TEST TYPE CV LT PAGE:

62 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST V-

- CSV*

VNC*

44

VALVE NUMBER 2-VS-HOV-200A 2-VS-HOV-200B 2-VS-HOV-200C 2-VS-HOV-2000 2-VS-HOV-201

  • . 2-VS*HOV-202 VIRGINIA POWER COMPANY SURRY UNIT 2 SECOND INSPECTION INTERVAL INSERVICE TESTING. PROGRAM - VALVE TABLE ISO DRAWING NUMBER SHEET DRWG VALVE NUMBER COOR TYPE VALVE SIZE ASHE TEST VALVE TEST CLASS CAT PCS TYPE TYPE 11548-CBB-006A 1 OF 2 C-7 MO BFLY CONTAINMENT PURGE SUPPLY, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF 2 C-8 MO BFLY CONTAINMENT PURGE SUPPLY, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF_2 D-7 MO BFLY CONTAINMENT PURGE EXHAUST, INSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF 2 D-8 MO BFLY

. CONTAINMENT PURGE EXHAUST, OUTSIDE CONTAIN-MENT ISOLATION VALVE 11548*CBB-006A 1 OF 2 D-7 MO BFLY CONTAINMENT PURGE BYPASS, OUTSIDE CONTAINMENT ISOLATION VALVE 11548-CBB-006A 1 OF 2 C-7 MO BFLY CONTAINMENT VACUUM BREAKER 36.00 2

AE C

36.00 2

AE C

36.00 2

AE C

36.00 2

AE C

8.00 2

AE C

18.00 2

AE C

CIV CIV CIV

63 OF 63 REVISION: 03 DATE: 3/19/92 NC REL COLD ALT REQ SHUT TEST v-csv-VNC*

39 39 39 39 39 39

4.5 VALVE TEST PROGRAM RELIEF REQUEST S2PV-5R3 Relief Requests identify code requirements which-are impractical for Surry Unit 2 _and provide justification for the requested exception.

Where appropriate, alternate testing to be performed in lieu of code requirements is proposed.

4-7 Rev. 3 March 19, 1992

RELIEF REQUEST V-1 System Various Valve(s):

All safety and relief valves category:

Class

  • Function:

Section XI Code Requirement For Which Relief Is Requested Safety and relief valve setpoints are tested in accordanc~ with PTC-25.3-1976 as directed by IWV..,;3512.

Basis For Request The American National Standard, ANSI/ASME OM 1981, Requirements for Inservice Performance Testing of Nuclear Power Plant Pressure Relief Devices, is approved for use in the 1986 Edition of ASME Section XI, Subsection IWV.

OM-1.represents current industry practices for tesiing relief valves and is a better standard for setpoint testing than PTC-25.3-1976.

Alternate Testing-Proposed Safety and relief valves will be tested in accordance with ANSI/ASME OM 1981.

4-8 S2PV-5R3 Rev. 3 March 19, 1992

S2PV-5R3 RELIEF REQUEST V-2 Replaced by Cold Shutdown Justification CSV-1 RELIEF REQUEST V-3 Replaced by Cold Shutdown Justification CSV-2 RELIEF REQUEST V-4 Replaced by Cold Shutdown Justification CSV-4 4-9 Rev. 3 March.19, 1992

RELIEF REQUEST V-5 System Feedwater Valve(s):

2-FW-10 2-FW-41 2-FW-72 category:

c Class 2

Function:

Main Feedwater check valves at Containment Penetrations.

Section XI Code Requirement For Which Relief Is Requested Exercise valve every three months.

Basis For Request Clos.ure of these valves during power operation would require securing feedwater which would result in reactor trip.

Cold shutdown testing of valves using flow to verify closure is inconclusive due to the inability to establish adequate differential pressure across the valve disc.

A test was conducted in an effort to verify whether closure of these valves can be determined using flow.

Because there is no isolation boundary between the steam generators and the valves, the test volume must include the steam generators.

A steam generator was pressurized with a nitrogen blanket to approximately 5 psig.

The 0.75 inch drain valve just upstream of the check valve was opened and flow was observed.

The 14 inch check valve did not stop the back flow through the vent.

It was concluded that the flow was inadequate to seat the check valve completely. Just a small gap between the disc and the seat was sufficient to create a flow area equa+ to or greater than the flow area through the drain.

T}1erefore, the pressure differential associated with the back flow is being created across the drain valve and not the disc of the check valve.

The above test proved to be inconclusive because of the inability to establish a sufficient.differential pressure across the disc.

The only way to increase the differential pressure is to increase the flow area from the test volume.

However, this is not*

achievable for the existing configuration.

Immediately upstrea~

of the drain valve is another 14 inch check valve, so the only available flow area from the test volume is the drain valve.

4-10 S2PV-5R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-5 (Cont.)

Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled every reactor refueling.

A different valve will be disassembled every reactor refueling.

4-11 S2PV-5R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-6 Relief Request Withdrawn RELIEF REQUEST V-7 Replaced by Cold Shutdown CSV-5 RELIEF REQUEST V-8 Replaced by Cold Shutdown Justification CSV-6 RELIEF REQUEST V-9 Replaced by Cold Shutdown Justification CSV-20 RELIEF REQUEST V-10 Replaced by Cold Shutdown Justification CSV-23 RELIEF REQUEST V-11 Replaced by Cold Shutdown Justification CSV-8 4-12, S2PV-5R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-12 Replaced by Cold Shutdown Justification CSV-9 RELIEF REQUEST V-13 Replaced by Cold Shutdown Justification csv-10 4-13 S2PV-5R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-14 system Chemical and Volume Control Valve(s}:

2-CH-258 2-CH-267 2-CH-276 category:

c Class 2

Function:

Charging Pump Discharge Check Valve Section XI Code Requirement For Which Relief Is Requested Exercise valves every three moriths.

Basis-For Request With present plant design, these valves can only be partial stroke exercised during power operation because the charging pumps cannot achieve design accident flow when pumping into the Reactor Coolant System at operating pressure.

The only available flow path t.o test these valves is into the reactor coolant system.

During cold shutdown, stroke exercising these valves could result in an overpressurization of the Reactor Coolant System and could force a safety system to function.

Alternate.Testing Proposed These valves will be partially stroked every three months and full flow tested each refueling.

4-14 S2PV-5R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-15 Replaced by Cold Shutdown Justification CSV-11 RELIEF REQUEST V-16 Replaced by Cold Shutdown Justification CSV-12 RELIEF REQUEST V-17 Replaced by Cold Shutdown Justification CSV-13 RELIEF REQUEST V-18 Replaced by Cold Shutdown Justification CSV-15 RELIEF REQUEST V-19 Replaced by Cold Shutdown Justification CSV-16 4-15 S2PV-5R3 Rev. 3 March 19, 1992

. RELIEF REQUEST V-2 0 system Safety Injection Valve(s):

2-SI-56 2-SI-47 category:

c Class 2

Function:

Low Head Safety Injection Pump suction from Containment Sump Check Valve Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.

Basis For Request To partial or full flow test these valves requires taking suction from the reactor containment sump which contains untreated water.

This water should not be introduced into the system.

~

Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling.

A different valve will be disassembled every reactor refueling.

4-16 S2PV-5R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-21 System Safety Injection Valve(s):

Valves affected by this request are identified in Category:

Class Function:

Table F.

Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.

Basis For Request These valves cannot be full stroke exercised during plant power operation.

The only full flow path is into the Reactor Coolant System and Low Head Safety -Injection pumps cannot overcome Reactor Coolant System operating pressure.

These valves will be partially stroked every three months through the pump recirculation line.

During cold shutdown, the Reactor Coolant System pressure still prevents full flow testing of the ch~ck valve.

During cold* shutdown, the charging flow could cause an

  • overpressurization condition.

Testing valves 2-SI-50 and 327 to the closed position requires isolating.the suction lines to the low head safety injection pumps, venting on the upstream side of the valve being tested, starting the pump on the other path, checking for leakage and then repeating the process for the other valve.

This test can take up to a hour to complete and places the unit into a LCO per Technical Specification 3.3 if performed during normal operation.

Alternate Testing Proposed These valves will be partially stroked every three months and full stroked every refueling.

Valves 2-SI-50 and 327 will be tested to the closed position every cold shutdown.

4-17 S2PV-5R3 Rev. 3 March 19, 1992

Valve 2-SI-46A,B 2-SI-50 2-SI-327 S2PV-5R3 RELIEF REQUEST V-21 (Cont.)

TABLE F Category C

C Class Function 2

Low Head Safety Injection Pump Suction from Refueling Water Storage Tank Check 2

Low Head Safety Injection Pump Discharge Check 4-18 Rev. 3 March 19, 1992

RELIEF REQUEST V-22 Replaced by Cold Shutdown Justification CSV-17 RELIEF REQUEST V-23 Replaced by Cold Shutdown Justification CSV-25 RELIEF REQUEST V-24 Replaced by Cold Shutdown Justification CSV-18 RELIEF REQUEST V-25 Relief Request Withdrawn 4-19 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-26 System Safety Injection Valve(s):

2-SI-107 2-SI-128 2-SI-145 category:

C Class 1

2-sI..:109 2-SI-130 2-SI-147 Function:

Accumulator Discharge Check Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.

Basis For Request These valves cannot be partial or full flow tested during normal operation because the accumulator pressure (600 t9 650 psig) is below Reactor Coolant System pressure and the injection of borated water would upset the reactor coolant chemistry.

During cold shutdown, the RCS pressure still prevents full flow testing.

To achieve full flow*through the valves during reactor refueling, the accumulator would have to be discharged from an initial pressure of 600 psig.

Discharging the accumulator from this pressure would stress the piping system and inject nitrogen into the RCS. *Nitrogen in the RCS has been linked to gas binding of the RHR pumps.

Alternate Testing Proposed To verify that these valves will stroke to the open position, they will be placed into two groups.

Valves 2-SI-130 and 147 are in one group and.valves 2-SI-107, 109, 128 and 145 are in the other group.

Because 2-SI-130 and 147 are downstream from where RHR connects to the SI line, they experience different service conditions than the other valves.

One valve from the group of four valves (2-SI-107, 109, 128 and 145) will be disassembled and inspected every refueling outage.

These valves will be partial flow tested every reactor refueling.

4-20 S2PV-6R3 Rev. 3 April 15, 1992

RELIEF REQUEST V-26 (Cont.)

Partial flow can be established through valves 2-SI-130 and 147 using RHR pump flow since these valves are downstream of where the two RHR lines discharge into the cold leg safety injection lines.

Testing experience has shown that the flow from both RHR pumps can drive the disk of valves 2-SI-130 and 147 to the back seat.

This impact event will be recorded using acoustic monitoring instrumentation for both valves each reactor refueling.

The data will be analyzed to show that the disk struck the back seat, thus verifying that the disk stroked to the full open position

RELIEF REQUEST V-27 System Safety Injection Valve(s):

Valves affected by this request are identified in*

Category:

Class Functiqn:

Table G.

  • Section XI Code Requirement For Which Relief Is Requested Exercise valves every three months.

Basis For Request The valves on the high head injection lines cannot be partial or full stroke exercised during power operation because flow through these valves would thermal shock the injection system and.cause unnecessary plant transients. *Flow cannot be established in the low head injection lines during power operation.

During cold shutdown,*the Reactor coolant System pressure still prevents full design flow.

Also, a partial or full stroke test could cause an overpres~urization of the Reactor Coolant System and force a safety system to.function.

To verify closure, valves 2-SI-79, 82, 85, 241, 242 and 243 must be vented *upstream and a leakage test performed.

Per Technical Specification Table 4.1-2A, periodic leakage testing on each valve shall be accomplished prior to entering power operation condition after each time the plant is placed in the cold shutdown condition for refueling and after each time the plant is placed in cold shutdown condition for 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> *if testing has not been accomplished in the proceeding 9 months.

No significant increase in safety will be realized by performing the leakage tests every cold shutdown.

Alternate Testing Proposed There is no installed instrumentation that can measure individual

.flow rates for valves 2~SI-79, 82, 85, 88, 91, 94, 238, 239, 240, 241, 242 and 243.

Full flow through the hot leg safety injection valves (2-SI-88, 91, 94, 238, 239 and 240) will be verified using clamp on ultrasonic flow instrumentation.

4-22 S2PV-6R3 Rev. 3 April 15, 1992

RELIEF REQUEST V-27 (Cont.)

Using low head pump flow, the cold leg injection valves (2-SI-79, 82, 85, 241, 242 and 243) will be acoustically monitored for the disk striking the back seat every reactor refueling.

The data will be analyzed to show that the disk struck the back seat, 'thus verifying that the disk stroked to the full open position.

Valves 2-SI-224, 225, 226, 227, 228, 229, 235, 236 and 237 will be full stroke exercised with flow every reactor refueling.

Valves 2-SI-79, 82, 85, 241, 242 and 243 will be tested to the closed position every reactor refueling per Technical Specification Table 4.1-2A.

Valves 2-SI-88, 91, 94, 238, 239 and 240 are confirmed closed by monitoring leakage from the Reactor Coolant System per Technical Specifications 3.1.C and 4.3.

Individual valve verification to the closed position is not possible with the current line configurations.

The remaining valves need only to open.

TABLE G Valve Category Class Function 2-SI-88, 91 C

1 Safety Injection to RCS 2-SI-94, 238 Hot Legs 2-SI-239, 240 2-SI-235 C

1 High Head Safety Injection 2-SI-236 to RCS Cold Legs 2-SI-237 2-SI-241 AC 1

Low Head Safety Injection 2-SI-242 to RCS Cold Legs 2-SI-243 2-SI-224, 225 C

2 High Head Safety Injection 2-SI-226, 227 Check Valve at Containment Penetrations 2-SI-228, 229 C

2 Low Head Safety Injection Check Valves at Containment Penetrations 2-SI-79, 82, 85 AC i

Safety Injection to RCS Cold Legs 4.:.23 S2PV-6R3 Rev. 3 April 15, 1992

RELIEF REQUEST V-28 system RWST Cross Tie Valve(s):

2-SI-25 2-SI-400 Category:

C Class 2

Function:

Charging Pump Suction from RWST Cross Tie Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.

Basis For Relief Exerci$ing these valves during power operation would require the charging pump suctions to be aligned with the refueling water storage tank.

This would cause a sudden increase in reactor coolant boron inventory.

Full.flow for the charging system can only be established during reactor refueling when the RCS is depressurized.

Valve 2-SI-25 must close to preserve inventory from the Unit 1 RWST when *the cross tie lines are opened.

There are no vents or pressure instrumentation upstream of the valve; therefore, the valve cannot be backseat tested with flow.

Alternate Testing Proposed These valves will partial flow tested during every cold shutdown and full flow tested during every reactor refueling.

Valve 2-SI-25 will be disassembled and inspected every other

.refueling outage to verify valve closure.

Per the guidelines of Generic Letter 89-04, this valve is the only one in the sample group and is therefore subject to disassembly every outage.

However, disassembling this valve every outage represents excessive intrusive maintenance.* If inspection results indicate degradation, the disassembly interval will be increased t6 once every refueling outage.

4-24 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-29 Replaced by Cold Shutdown Justification CSV-21 RELIEF REQUEST V-30 Relief Request Withdrawn 4-25 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-31 System Reactor Coolant Valve(s):

2-RC-SOV-200A-l

  • 2-RC-SOV-200A-2 2-RC-SOV-200B-1 2-RC-SOV-200B-2 Category:

B Class 1

Function:

Head Vent for Reactor Vessel Section XI Code Requirements For Which Relief Is Requested Exercise valves and perform fail-safe testing_ every three months.

Basis For Request These valves isolate the reactor vessel from containment atmosphere.

Partial or full stroke exercising the valves during normal operation or during cold shutdowns where the reactor coolant system is pressurized could result in the release of uncontrolled contamination to containment.

Alternate Testing Proposed Exercise for operability during cold shutdowns when the reactor coolant system is not pressurized (but not more frequently than once per three months).

4-26 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-32 Replaced by Cold Shutdown Justification CSV-22 RELIEF REQUEST V-33 Relief Request Withdrawn 4-27 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-34 System Various Valve(s):

Valves affected by this request are identified in

  • Table J.

Category:

Class Function:

Section XI Code Requirement For Which Relief Is Requested Section XI, IWV-3417(a) "Corrective Action" Basis For Request These valves have a normal stroke time of 2 seconds or less; therefore, they could be considered rapid acting valves.

Alternate Testing Proposed Whenever. the stroke time of these valves exceeds 2 seconds, IWV-3417(b) will be applied.

Note: The list of valves in Table J may change due to maintenance activities which affect valve performance.

An updated list of rapid acting valves will be maintained by ISI site personnel.

4-28 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-34 (Cont.)

TABLE J Valve 2-MS-TV-210 2-CC-TV-207 2-SS-TV-200.A,B 2-SS-TV-201A,B 2-SS-TV-206A,B 2-SS-TV-202A,B 2-SS-TV-204A,B 2-DA-TV-200A,B 2-DA-TV-203A,B Category B

B A

A A

A A

A A

2-VG-TV-209A,B A

2-LM-TV-200A-H A

2~cv,;,_TV-250A-D A

2-RC-PCV-2456 BC 2-RC-PCV-2455C BC 2-RC-SOV-200A-1,-2 B

2-RC-SOV-200B-1,-2 S2PV-6R3 Class Function 2

3 1

1 1

1 2

2 2

2 2

2 1

1 1

Main steam Drain to Blowdown Component Cooling from RCP

  • Pressurizer Liquid Space Sample Pressurizer Vapor Space Sample Primary Coolant Hot Leg Sample Primary Coolant Cold Leg Sample Pressurizer Relief Tank Gas

-Space Sample Reactor Containment Sump Pump Discharge Isolation Post Accident Sample Retµrn Line*

Gas Vent Header Isolation Leakage Monitoring System Isolation Containment Vacuum Pump Suction Isolation Pressurizer Power Operated Relief Valve Pressurizer Power Operated Relief Valve Reactor Vessel Head Vent 4-29 Rev. 3 March 19, *1992

Valve 2-CH-TV-2204B 2-GW-TV-200-207 2-GW-TV-211A,B 2-BD-TV-200A-F 2-RM-TV-200A,B,C 2-DG-TV-208B 2-IA-TV-200 2-IA-TV-201B 2-SI-TV-200 2-SI-TV-201B S2PV-6R3 RELIEF REQUEST V-34 (Cont.)

TABLE J Category A

A A

B A

A A

A A

A 2

2 2

2 2

2 2

2 2

2 Class Function RCS Letdown Isolation Trip Valves Suction/Discharge Line to Hydrogen Analyzer Containment Grab Sample Steam Generator Blowdown Isolation Isolation on Monitor Return Line Primary Drain Transfer Pump Discharge Isolation Instrument Air Supply to Containment Isolation Instrument Air Suction from Containment Isolation Nitrogen Supply to Accumulators Containment Isolation Accumulators to Waste Gas Charcoal Filters Containment Isolation 4-30 Rev. 3 March 19, 1992

RELIEF REQUEST V-35 Replaced by Cold Shutdown Justification CVS-7 4-31 S2PV-6R3 Rev. 3 March 19, 1992

System EE Valve (s) :.

1-EE-SOV-102 1-EE-SOV-103 1-EE..;.SOV-104 Category:

B Class NC RELIEF REQUEST V-36 Function:

Diesel Fuel Oil Pump Discharge ValvesSection XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.

Basis For Request These valves are small {l"), fast acting solenoid operated gate

  • valves with no position indication lights and no iocal visual means of determining stroke time.

Valve operability can only be indirectly observed by verifying system operability.

Also, these valves are interlocked with the pumps to open and close upon pump startup and shutdown.

Alternate Testing Proposed These solenoid valves will be stroke tested quarterly by observing that the solenoid valves perform their intended function (fuel oil is flowing to the day tank after the solenoid valve has been opened).

4-32 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-37 system EG Valve(s) 2-EG-S0V-200A 2-EG-SOV-200B Category B

Class NC Function:

Diesel Air Start System Solenoid ValvesSection XI Code Requirement For Which Relief Is Requested Section XI, IWV-3413 "Power Operated Valves" Basis For Request These valves have actuation times considerably under a second and there is no visual reference on the solenoid valve when it has stroked; therefore, the stroke time cannot be measured.

Alternate Testing Proposed These solenoid valves will be stroke tested quarterly by observing that the solenoid valves perform their intended function, which is to start the diesel engines.

Adequate performance of the valves will be verified by reco~ding the time it takes for the diesel engines to reach a predetermined RPM and comparing.the time to an acceptance criterion.

Also, the failure of these valves to open or close will promptly give a diesel engine trouble alarm.

Further investigation would identify problems with the operability of these valves.

4-33 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-38 Relief Request Withdrawn 4-34 S2PV-6R3 Rev. 3 March 19, 1992

~

RELIEF REQUEST V-39 System Various Valve(s):

Valves affected by this request are identified by Table K Category:

Class Function:

Section XI Code Requirement For Which Relief Is Requested Leakage rate measurements shall be compared with the permissible leakag~ rates specified by the plant owner for~ specific valve.

Basis For Request The piping configurations for some containment penetrations do not allow for the individual leakage testing of the containment isolation valves which isolate the penetrations.

Alternate Testing Proposed In cases where containment isolation valves cannot be individually leakage tested, the containment isolation valves are grouped based on the configuration restraints and the groups are assigned permissible leakages.

The valve groups are subject to the acceptance criteria described in IWV-3426 and 3427.

4-35 S2PV-6R3 Rev. 3 March 19, 1992

i Valve 2-SI-150 2-SI-MOV-2867C 2-SI-MOV-2867D.

2-SI-174 2-SI-MOV-2869A 2-SI-MOV-2860A 2-SI-MOV-2860B 2-SI-321, 322 2-IA-TV-200 2-IA-704 2-LM-TV-200A 2-LM-TV-200C 2-LM-TV-200E 2-LM-TV-200G 2--LM-TV-200B 2-LM-TV-200D 2-LM-TV-200F 2-LM-TV-200H 2-CS-MOV-201A 2-CS-MOV-201B 2-CS-MOV-201C 2-CS-MOV-201D 2-RS-MOV-255A 2-RS-MOV-255B 2-RS-46, 53 2-VS-MOV-200C 2-VS-MOV-200D 2-VS-MOV-201 S2PV-6R3 RELIEF REQUEST V-39 (Cont.)

Table K Category AE A

A AE A

.A AE A

AE A

A A

A A

AE AE Class Function 2

Boron Injection Tank Isolation 2

High Head Safety Injection to Reactor Coolant System 2

2 2

2 2

2 2

2 4-36 Low Head Safety Injection Pump Suction from Containment sump Instrument Air Discharge to Containment

.Leakage Monitoring System Isolation Leakage Monitoring System Isolation Containment Spray Pump Discharge Containment Spray Pump Discharge**

Recirculation Spray Pump Suction from Containment Sump Containment Purge Exhaust Isolation Rev. 3 March 19, 1992

RELIEF REQUEST V-39 (Cont.)

TABLE K Valve Category Class Function 2-VS-MOV-200A AE 2

Containment Purge Supply 2-VS-MOV-200B Isolation 2-VS-MOV-202 2-RL-3 AE 2

Reactor Cavity 2-RL-5 Purification Return Line 4-37 S2PV-6R3 Rev. 3 March 19, 1992

___J

RELIEF REQUEST V-40 Relief Request Withdrawn 4-38 S2PV-6R3 Rev. 3 March 19, 1992

System Valve(s)

FW 2-FW-144 2-FW-148 Category C

Class 3

RELIEF REQUEST V-41 2-FW-159 2-FW-163 2-FW-174 2-FW-178 Function Auxiliary Feedwater Pump Recirc Line and Pump Oil Cooler Check ValvesSection XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.

Basis For Relief These check valves cannot be partial or full flow tested because instrumentation is not installed to measure flow or differential pressure.

There is no other indirect means to verify full flow for these valves with the current configuration.

Alternate Testing Proposed Valves 2-FW-144, 159, and 174 will be grouped together; valves 2-FW-148, 163, and 178 will be grouped-together and one valve from each group will be disassembled and inspected every reactor refueling:

A different valve from each group will be disassembled every reactor refueling.

These valves will be part stroke exercised every three months.

4-39 S2PV-6R3 Rev. 3 March 19, 1992

System MS Valve(s) :

2-MS-176 2-MS-178 2-MS-182 Category C

Class 2

RELIEF REQUEST V-42 Function Main steam Header Supply Check Valves To Turbine Driven Auxiliary Feedwater Pump Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability to the closed position every three months.

Basis For Relief These check valves cannot be exercised to the closed position during normal operation because this test would require the venting of process steam while verifying the closed position.

Venting of process steam would endanger the test personnel.

Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling~

A different valve will be disassembled every reactor refueling.

The valves will be full flow tested every three months.

4-40 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-43 system cs Valve(s):

2-cs-104 2-cs~13 2-Rs-11 2-CS-105 2-CS-24 2-RS-17 Category:

AC (2-CS-13,24 and 2-RS-11,17) and C (2-CS-104,105)

Class 2

Function:

Containment Spray Pump Discharge Check ValvesSection XI Code Requirement For Which Relief Is Requested Exercise valves for operability every three months.

Basis For Relief These check valves cannot be partial or full *flow exercised during normal operation because this test would introduce containment spray to containment.

These valves cannot be locally exercised during normal operation because they are located inside containment.

These valves are located upstream of the spray nozzles.

Fo.r valves 2-CS-13 and 24, and 2-RS-11 and 17, the only way to perform a test (partial open or closed) is to install a blank flange downstream and local!~ perform an partial open and close test using air.

The small increase in safety gained by performing this test every cold shutdown does not justify the burden of installing the blank flange and locally back seat testing the valves at the increased cold shutdown test frequency.

There are no blank flanges installed downstream for valves 2-CS-104 and 105.

.Therefore, a back seat test or a partial open test cannot be performed on these valves with the current piping configuration.

These valves have no external lever arms.

The only means to exercise valves 2~CS-104 and 105 to the open and closed positions is by di~assembly.

Valves 2-CS-13 and 24, and 2-RS-11 and 17 do have weight-loaded lever arms, however, the weight position and lever arm angle are subject to adjustment to ensure that the valves open when a pressure differential using air is applie~ every 1S months as required by T. s. 4.5.C.

Therefore, torque measurements would not be repeatable.

4-41 S2PV-6R3 Rev. 3 March 19,.1992

RELIEF REQUEST V-43 (Cont.)

Alternate Testing Proposed For testing to the open and closed positions, valves 2-CS-104 and 105 will be grouped together and one valve from the group will be disassembled and inspected every reactor refueling.

A different valve will be disassembled every reactor refueling.

A partial open test cannot be performed on valves 2-CS-104 and 105 with the current piping configuration.

For testing to-the full open position; valves 2-CS-13 and 24 will be grouped together; and valves 2-RS-11 and 17 will be grouped_

together and one valve from each group will be disassembled and inspected every reactor refueling.

A different valve from each group will be disassembled every reactor refueling.

Technical Specifications Paragraph 4.5.C. requires verification that valves 2-CS-13 and 24, and 2-RS-11 and 17 open when the discharge line of the pump is pressurized with air and seat when a vacuum is applied.

This test partially strokes the valves open..

Valves 2-CS-13 and 24, and 2-RS-11 and 17 are containment isolation valves and are tested to the closed position each refueling outage as part of the Appendix J leak testing program.

4-42 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-44 System Various Valve(s):

Valves affected by this justification are identified Category:

Class Function:

by Table L.

Section XI Code Requirement For Which Relief Is Requested Exercise valves for operability to the closed position every three months.

Basis For Relief These check valves must seat upon reversal of flow in order to fulfill their safety functions.

The only way to verify closure is to perform a local leak rate/back pressure test.

Since the valves are located inside containment, they cannot be tested quarterly.

These valves are containment isolation valves and are subject to leak testing every reactor refueling outage per the requirements of the Appendix J leak testing program and Section XI IWV-3426 and 3427.

The leak tests not only.verify that the valves close adequately as does a normal back pressure test, but the tests also reveal the condition of the valve seating surfaces.

As required by IWV-3426 and IWV-3427, the leak tests include acceptance criteria for the maximum allowed leakage.

Performing a back seat test every cold shutdown does not provide enough increase in safety to justify the burden of back seat testing on a more frequent basis.

Alternate Testing Proposed Exercise to the closed position every reactor refueling.

4-43 S2PV-6R3 Rev. 3 March 19, 1992

Valve 2-IA-864 2-IA-868 2-RC-160 2-RM-3 2-SI-304 2-VP-12 S2PV-6R3 RELIEF REQUEST V-44 (Cont.)

TABLE L Category AC AC AC AC AC*

Class Function 2

Instrument Air Containment Isolation 2

Primary Grade Water to Pressurizer Relief Tank 2

Isolation on Monitor Return Line 2

Nitrogen Accumulators N2 Supply 2

Condenser Air Removal Discharge to Containment 4-44 Rev. 3 March 19, 1992

RELIEF REQUEST V-45 system Component Cooling Valve(s):

2-CC-94 2-CC-555 2-CC-556 2-CC-55_7 2-CC-95 2-CC-592 Category:

c Class 3

Function:

Component Cooling Supply to RCP Thermal Barrier Isolation Section XI Code Requirement_

For Which Relief Is Requested Exercise valves for operability to the closed position every three months.

Basis For Relief These check valves must seat upon reversal of flow in order to fulfill their safety function to prevent gross-leakage.

For the following reasons, it is not practical to test the thermal barrier check valves quarterly or at cold shutdown:

1.)

the valves are inside a locked radiation area located inside containmeDt; therefore, they are not accessible during normal operation, 2.)

the valves are inaccessible for about 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> after cold shutdown ~ue to deconta~ination activities which must be performed before entry intd the are~,

3.)

4.)

the reactor cooling pump(s) may be running with the reactor cooling system temperature less than 200 OF if an RHR loop is unavailable (in this case the valves and thus cooling to the thermal barriers would normally not be isolated) and the valves have soft seats that are replaced every five years and using pressure to back seat these valves on the more frequent cold shutdown frequency may accelerate the degradation of the soft seats.

These valves will be exercised only during refueling outages because the small increase in safety gained by performing this test every cold shutdown does not justify the burden of performing a local back pressure test.

4-45 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-45 (Cont.)

Alternate Testing Proposed Exercise to the closed position every reactor refueling

March 19, 1992

.RELIEF REQUEST V-46 system Service Water Valve(s):

2-SW-247 2-SW-249 category:

C Class 3

2-SW-251 2-SW-253 Function:

Recirculation Spray Heat Exchanger Service water Supply Vent ValvesSection XI Code Requirement For Which Relief Is Reguested Exercise valves for operability to the open position every three months.

Basis For Relief These check valves must open to provide an effective vent path to ensure that the service water headers are filled and flow through

.the recirculation spray heat exchangers is quickly.established.

There is no instrumentation to measure flow or differentail.

pressure across the valves.

The valves are inaccessible and cannot be manually manipulated without disassembly.

The valves can.be partial stroked open only when service water is sent through t~e recirculation spray heat exchangers.

The recirculation spray heat exchangers are maintained dry to avoid fouling.

With*the current piping configuration, there is no means to partial stroke test these valves without fouling the heat exchangers.

Alternate Testing Proposed These valves will be grouped together and one valve from this group will be disassembled and inspected every reactor refueling.

A different valve will be disassembled every reactor refueling.

4-47 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-47 System Various Valve(s):

Valves affected by this relief request are identified Category:

Class Function:

by Table M.

Section XI Code Requirement For Which Relief Is Requested IWV-3417(a) - If, for power operated valves, an increase in stroke time of 25% or more from the previous test for valves with full stroke time greater than 10 sec or 50% or more for valves with full stroke time less than or equal to 10 sec is observed, test frequency shall be increased to once each month until corrective action is taken.

Basis For Relief The valves listed in Table M typically exhibit stroke time data scatter from test to test that exceeds the 25% and 50% required by IWV-3417(a).

These valves.either have no remote indication and/or no remote control, or no remote open/close control, or the test requires that the power source be interrupted at the valve and not at the switch.

Therefore, applying the r~quirements of IWV-3417(a) in these cases is not practical~

Valve 2-CC-LCV-201 maintains the water level in the seal cooling water tank for component cooling to charging pump cooling system.

Because this valve is being added to the IST Program, there is currently no stroke time data.

However, this valve has no.remote indication or manual position switch.

The valve can be exercised by manipulating the tank level signal and timed by locally observing stem movement.

Differences in interpreting when the valve stem starts and stops will affect the repeatability of the stroke time measurements.

The position of valves 2-MS-RV-201A, Band c is controlled by a potentiometer.

Although the valves have remote position _

indication, there is no open/closed switch.

The speed at which the valve goes open or closed depends upon the speed at which the operator turns the potentiom~ter knob, which in turn affects the repeatability of the stroke time measurements.

4-48 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST v~47 (Cont.)

Valves 2-RH-FCV-2605 and 2-RH-HCV-2758 have no remote indication.

The stroke time is measured by locally.observing stem movement.

Differences in interpreting when the valve stem starts and stops affect the repeatability of the stroke time measurements.

Valves 2-SW-TCV-208A, Band C control the flow of service water to the charging pump lube oil coolers.

Because these valves are being added to the IST Program, there is currently no stroke time data.

However, there is no remote indication or manual position switch.

Valve position is controlled by lube oil temperature.

The valves can be locally manipulated and timed by observing stem movement.

Differences in interpreting when the valve stem starts and stops will affect the repeatabiiity of the stroke time measurements.

Alternate Testing Proposed Maximum.stroke times will be established in accordance with IWV-3417(b).

However, the ranges described in IWV-3417(a) will not be applied.

4-49 S2PV-6R3 Rev. 3 March 19, 1992

Valve 2-CC-LCV-201

.2-MS-RV-201A, B, C 2-RH-FCV-2605 2-RH-HCV-2758 2-SW-TCV-208A,B,C S2PV-6R3 RELIEF REQUEST V-47 (Cont.)

TABLE M Category Class Function

  • B 3

Charging Pump Seal Cooling Surge Tank Level Control B

2 Main steam Header Discharge to Atmosphere PORV B

2 RHR Heat Exchanger Bypass Flow Control Valve B

2

.RHR Heat Exchanger Discharge Flow Control Valve B

3 Service Water to Charging Pump Lube Oil Cooler Temperatur~ Control Valves 4-50 Rev'. 3 March 19, 1992

INTERIM RELIEF REQUEST V-48 System Main* Steam Valve_(s):

2-MS-NRV-201A 2-MS-NRV-201B 2-MS-NRV-201C Category:

C Class 2

Function:

Main Steam Non-Return ValvesSection XI Code Requirement For Which Interim Relief Is Requested Exercise valve for operability to the closed position every three months.

Basis For Interim Relief These stop check valves ara currently verified closed by driving the stem down onto the disk using the motor ope~ator after the main steam system has been isolated during plant shutdown.

Full stroke or part stroke exercising of these valves during power

Closure testing of stop check valves was initially addressed in response to Question 25 in the original meeting minutes to Generic Letter 89-04.

The question and response are as follows:

Question 25:

Previous to this, it was closure of stop check valves the stem

( shaft).

Is this reverse flow testing?

Response

permissible to verify simply by operation of acceptable instead of Verification of closure capability of stop check valves by using the handwheel meets the ASME Code requirements.

This, however, is not the pref erred method of test.

The NRC staff considers reverse flow testing to be a more reliable indication of valve operability.

4-51 S2PV-6R3 Rev. 3 March 19, 1992

INTERIM RELIEF REQUEST V-48 (Cont.)

However, Item c in the NRC letter dated September 26, 1991 entitled, "Supplement to Minutes of the Public Meetings on Generic Letter 89-04," provided the following revision to the Question 25 response:

If a prompt closure of these valves on cessation or reversal of flow is required to accomplish a safety-related function, closure must be verified by reve_rse flow testing or such other positive means as acoustic monitoring or radiography.

Surry Power station interpreted the original Question 25 response to mean that driving the stem down onto the disk is a valid ASME Code closure test for stop check valves.

However, Item C in the revision to the Question 25 response indicates that this test method is not adequate and that reverse flow testing or some other positive means as described above be used.

It is not practical to perform a reverse flow test at power for the reason previously stated. It is not practical to perform a reverse flow test during shutdown because it would require that the valve stems remain in the open position during plant shutdown.

To ensure double valve isolation during a normal shutdown, the secondary plant piping is isolated from the steam source by driving the stem of the stop check valves onto the disk.

After the plant is shutdown, back seat testing these valves with air would require pressurizing over the disk to verify closure.

Given the.mass of the 30" diameter disk and the large volume of pipe involved,*lifting the disk off the seat to show free movement is not practicable.

Disassembly and inspection or other visual inspection techniques would be meaningless because the disk could have been driven to the seat during normal shutdown; therefore, the inspection would not prove verification that the disk went freely to its seat after cessation of flow.

Another test method identified in Item C is radiography.

This inspection technique suffers the same limitations as the visual inspection techniques discussed above.

Also, given the size of these valves (30 11 nominal pipe size diameter) and internal surface irregularities, radiograph resolution would be poor.

The other test method identified in Item c is acoustic monitoring.* Virginia and Electric Power Company is reviewing in-house and vendor capabilities to acoustically monitor the valves.

during shutdown.

4-52 S2PV-6R3 Rev. 3 March 19, 1992

INTERIM RELIEF REQUEST V-48 (Cont.)

Interim Alternate ~esting Proposed During the Surry Unit 2, 1993 refueling outage, one or more test*

methods will be evaluated in the field to determine their practicality.

If a test method, as described in Item C,* can be developed, it will be implemented at Surry Power Station Unit 2 during the next refueling outage following the Unit 2 1993 refueling outage.

Until the new test methods are implemented, Surry Power Station will continue to test these stop check valves to the closed position by driving the stem to the disk every cold shutdown.

This test will be adequate to demonstrate that the disk can be properly positioned on the seat.* Also, free movement of the disk from the seat to the full open position is demonstrated when steam flow is established in the mainsteam lines and 100% power is achieved.

(.

4-53 S2PV-6R3 Rev. 3 March 19, 1992

RELIEF REQUEST V-49 Various System Valve(s):

All Valves Subject to Appendix J Leakage Testing (Category A CIV Valves) category:

A and AC Class Various Function:

Limit Leakage to a Specific Maximum Amount Section XI Code Requirement For Which Relief Is Requested IWV-3427(b) - Specifies corrective actions in addition-to IWV-3427(a) for valve sizes of six inches and larger if a leakage rate exceeds the rate determined by the previous test by an amount that reduces the margin between measured leakage rate and the maximum permissible rate by 50%.

Also, corrective actions are required if a projection based on thre.e or more tests indicates that the leakage rate of the next scheduled test will exceed the maximum permissible leakage rate by greater than 10%.

Basis For Relief Most valves that are leak rate tested are tested in the "as found" condition, subject to maintenance and retested in the !las left" condition.

The valve maintenance is -performed on.a routine basis and it effectively resets the leakage to a small amount.

Therefore; basing corrective actions on previous test results or projections serves no useful function.

Alternate Testing Proposed.

The requirements of IWV-3427(a) will be applied; however, the requirements of IWV-3427(b) will not be implemented.

The alternate testing presented in this Relief Request conforms to NRC Generic Letter 89-04, Attachment 1, Item 10.

4-54 S2PV-6R3 Rev. 3 March 19, 1992

4.6 VALVE TEST PROGRAM COLD SHUTDOWN JUSTIFICATION S2PV-6R3 Section XI, Paragraphs IWV-3412 and IWV-3522 all---owfor the full stroke exercising of valves during Cold Shutdown (but not more frequently than every three months) if the valves cannot be exercised during normal operation.

Therefore, no request for relief from

.testing every three months is necessary.

However, the code does require that these.valves be specifically id'entified by the owner.

The cold shutdown justifications identify and provide the technical basis for valves exercised during cold shutdown but not during normal operation.

4-55 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-1 system Main steam Valve{s):

2-MS-TV-201A 2-MS-TV-201B 2-MS-TV-201C Category:

B Class 2

Function:

Main Steam Line Trip Valves Cold Shutdown Justification Full stroke or part stroke exercising of these valves during power operation could result in a turbine and reactor trip.

Note:

The technical specification acceptance* criteria are more limiting than the standard Section XI test criteria because the technical specification requires the measurement of elapsed time from the manual initiation of steam line isolation to initiation of main trip valve motion {must be less than or equal to 4.0 seconds) and the measurement of elapsed time from full open to full closed

{must be less than or equal to 5.0 seconds).

If either of the limiting times are exceeded, the valve fails the test.

Section XI requires the measurement of elapsed time from initiation of steam line isolation to full valve closure, which is a less conservative test.

4-56 S2PV-6R3 Rev. 3 March 19,* 1992

COLD SHUTDOWN JUSTIFICATION CSV-2 Replaced by Interim Relief Request V-48 COLD SHUTDOWN JUSTIFICATION CSV-3 Cold Shutdown Justification Withdrawn.

4-57 S2PV-6R3 Rev. 3 March 19, 1992

System Valve(s):

Category:

Class Function:

COLD SHUTDOWN JUSTIFICATION CSV-4 Auxiliary Feedwater Valves affected by this justification are identified by Table A.

Cold Shutdown Justification Partial or full opening these valves during power operation.would introduce cold auxiliary feedwater to the. steam generators resulting in thermal stress and possible steam generator tube degradation.

To test valves 2-FW-142, 157 and 172 to the closed position, flow must be established to the steam generators in order to back seat the valves on the discharge side of the non-running pumps.

This test would also introduce cold auxiliary feedwater to the steam gerierators if performed during nor~al operation.

. 4-58 S2PV-6R3 Rev. 3 March 19, 1992*

.Valve 2-FW-27 2-FW-58 2-FW-89 2-FW-131 2-FW-133 2-FW-136 2-FW-138 2-FW-142 2-FW-157 2-FW-172 2-FW:-272 2-FW-273 2-FW-e305 2-FW-306 S2PV-6R3 COLD SHUTDOWN JUSTIFICATION CSV-4 (Cont.)

TABLE A Category Class Function C

2 Auxiliary Feedwater Header Check at Main Feedwater Header Valves C

2 Auxiliary Feedwater Header Check Valves at Containment Penetration C

3 Auxiliary Feedwate:t Pump Discharge *Check Valves C

2 Check Valves at Containment Penetration (Cross-Connect for Unit 1 Aux. Feed. from Unit 2)

C 2

Check Valves at Containment Penetration (Cross-Connect for Unit 1 Aux. Feed. from Unit 2) 4-59 Rev. 3 March 19, 1992

system Valve(s):

Category:

Class Function:

COLD SHUTDOWN JUSTIFICATION CSV-5 Component Cooling Valves affected by this justifica~ion are identified by Table B Cold Shutdown Justification These valves are.located in the containment and may be normally open or closed depending on system lineup.

A containment entry and manipulation of other system valves are necessary to test these valves to either the open or closed position.

This is*

considered impractical during power operation.

Valve 2-CC-176 2-CC-177 2-CC-242 2-CC-233

C TABLE B Class Function 3

Component Cooling to RHR Heat Exchanger Check Valves 3

Component Cooling to Reactor Containment Air Recirculation Coolers 4-60 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-6 system Component Cooling Valve (s) :

.Valves affected by this justification are identified by Table C.

category:

Class

. Function:

Cold.Shutdown Justification To perform an operability or a fail-safe test, the component cooling lines must be isolated, thereby stopping the flow of cooling water to the Reactor Coolant Pumps.

Loss of cooling water to these pumps can be damaging, even for short periods of time.

Valve 2-cc-1 2-CC-58 2-CC-59 2-CC-TV-205A 2-CC-TV-205B 2-CC-TV-205C S2PV-6R3 Category C

B TABLE C Class Function 3

Component Cooling to Reactor Coolant Pumps 3

Component Cooling from Reactor Coolant Pumps 4-61 Rev. 3*

March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-7 System Reactor Coolant Valve(s):

2-RC-PCV-2456 2-RC-PCV-2455C Category:

BC Class 1

Function:

Pressurizer Power Operated Relief Valves Cold Shutdown Justification These pressurizer power operated relief valves have shown a high probability of sticking open while being exercised during power operation.

Also, these valves are not required for overpressure protection unless the primary system temperature is under 350 degre~s F per Technical Specification Paragraph 3.1.G.1.b(3).

These valves will be tested on approach to Cold Shutdown and testing shall not be deferred.

4-62 S2PV-6R3.

Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-8 System Residual Heat Removal Valve(s):

2-RH-5 2-RH-11 2-RH-47 Category:

C Class 1 (2-RH-47), 2 (2-RH-5 and 11)

Function:

RHR Pump Discharge Check Valve Cold* Shutdown Justification*

These valves can only be partial or full stroke exercised to the open position and verified closed during the testing of RHR pumps 2-RH-P-lA and lB (refer to Relief Request P-7).

The low pressure pumps take suction.from and discharge to the reactor coolant system which operates at 2235 psig.

This pressure is well above the operating pressure of the pumps; therefore, testing during normal operation is not possible.

4-63 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-9 System Residual Heat Removal Valve(s):

2-RH-MOV-2700 2-RH-MOV-2701 category:

B Class 1

Function:

RHR suction form Reactor Coolant System Cold Shutdown Justification These valves are interlocked with Reactor Coolant System pressure such that the valves cannot be opened at elevated reactor coolant system pressure.

Overpressurization of the suction line may cause a LOCA.

The interlocks cannot be bypassed with normal control-circuits.

4-64

,S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-10 System Residual Heat Removal Valve(s):

2-RH-MOV-2720A 2-RH-MOV-2720B Category:

B Class 1

Function:

RHR Discharge to Reactor Coolant System Cold Shutdown Justification With the MOV* shut and if its respective check valve is leaking, there is no way to determine whether or not an-overpressure condition exists before opening the MOV.

If the MOV was opened and an overpressure condition did exist between the MOV and the RCS, the primary pressure of 2235 psig will be released on the Residual Heat Removal System with a relief valve setting of 700 psig.

This would be an unnecessary challenge to the Residual Heat *Removal System.

Since the MOV is also part of the discharge piping of an accumulator, there is a possibility of discharging an accu~ulator.

into the RHR system and disabling it.

The accumulators are maintained at *pressure above the normal operating or shutdown pressure o_f the Residual Heat Removal System.

Opening of these valves wo~ld dump accumulator water into the Residual Heat Removal System.

This will dilute the boron concentration of the accumulator as well as lower its level and pressure, which is a violation of Technical Specifications.

4-65 S2PV-6R3 Rev. 3 March 19, 1992

System Valve(s):

Category:

COLD SHUTDOWN JUSTIFICATION CSV-11 Chemical and Volume Control 2-CH-LCV-2115C 2-CH-LCV-2115E B

Class 2

Function:* Charging Pump Suction from Volume Control Tanks Cold Shutdown Justification Partial or full stroke exercising these valves during power operation would require the charging pump suctions to be aligned with the refueling water storage tank.

This would cause a sudden increase in Reactor Coolant System boron inventory, which would cause a plant transient.

4-66 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-12 Cold Shutdown Justification Withdrawn 4-67*

S2PV-6R3 Rev. 3 March 19, 1992

System Valve(s):

Category:

Class

  • Function:

COLD SHUTDOWN JUSTIFICATION CSV-13 Chemical and Volume Control 2-CH-MOV-2381 A

2 Reactor Coolant Pump Seal Water Return Cold Shutdown Justification:

Closure of this valve with Reactor Coolant Pumps in operation will cause a loss of seal flow resulting in possible pump seal damage.

4-68 S2PV-6R3 Rev. 3 March 19, 1992

System Valve(s):

category:

Class Function:

COLD SHUTDOWN JUSTIFICATION CSV-14 Residual Heat Removal 2-RH-FCV-2605 2-RH-HCV-2758 B

2 Residual Heat Removal Exchanger flow control Cold Shutdown Justification These valves have no remot~ position indication and are located inside containment.

The valves can only be exercised (partial or full stroke) and timed by locally observing stern movement.

Because a containment entry is required to perform the exercise and fail-safe tests, it will be conducted every cold shutdown.

4-69 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-15

-systein Chemical and Volume Control Valve(s):

2-CH-TV-2204A 2-CH-LCV-2460A 2-CH-LCV-2460B category:

Class Function:

2-CH-TV-2204B A (2-CH-TV-2204A, B) and B {2-CH-LCV-2460A, B) 1 {2-CH-LCV-2460A, B) and_ 2 (2-CH-TV-2204A, B)

Reactor Coolant system Letdown Isolation Trip and Level Control Valves Cold Shutdown Justification Exercising these valves during power operation interrupts letdown flow from the reactor coola_nt system (RCS) to the volume control tank.

If the valves should fail closed, reactor coolant inventory control would be lost.

  • The pressurizer level control program controls reactor coolant inventory by regulating the operation of the charging flow control valve so that the charging input flow to the RCS and reactor coolant pump seal injection flow into the RCS matches letdown flow.

Also, exercising these valves during normal operation will interrupt letdown flow through the regenerative heat exchanger.

This flow interruption would allow a slug of relatively cool charging water to thermal shock the nozzle connecting the 3 11 charging line to the 27" loop 2 cold leg injection line.

The valve controllers do not allow for a part stroke exercise test.

4-70 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-16 System Chemical and Volume Control Valve(s):

2-CH-MOV-2289A 2-CH-MOV-2289B Category:

A (2-CH-MOV-2289A) and B (2-CH-MOV-2289B)

Class 2

Function:

Normal Charging Header Isolation Cold Shutdown Justification Failure of these valves*in the closed position during exercising would cause a loss of charging flow and could result in an inability to maintain reactor coolant inventory.

4-71 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-17 Syste~

Safety Injection Valve(s):

2-SI-MOV-2890C Category:

A Class 2

Function:

Low Head Safety Injection to Reactor Coolant System Cold Legs Cold Shutdown Justification In accordance with Technical Specification 3.3.A.8, during power operation; the A.C. power shall be removed from 2-SI-MOV-2890C.

with the valve in the open position.

If this valve was stroked during power operation and failed in the closed position, the Low Head Safety Injection System would be rendered inoperable.

4-72 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-18 System Safety Injection Valve(s):

2-SI-MOV-2867C 2-SI-MOV-2867D Category:

A Class 2

Function:

High Head Safety Injection Isolation Cold Shutdown Justification These valves cannot be partial or full stroke exercised during power operation.

Opening these valves would allow excess charging flow into the Reactor Coolant System causing a reactivity transient.

4-73 S2PV-6R3 Rev. 3 March 19, 1992*

I~

COLD SHUTDOWN JUSTIFICATION CSV-19 System Chemical and Volume Control Valve(s):

2-CH-225 2-CH-227 2-CH-MOV-2350 2-CH-228 2-CH-229 Category:

B (2-~H-MOV-2350, 2-CH-228) and C (2~CH-225,227,229)

Class 2

Function:

Emergency and Manual Emergency Boration Line Isolation Valves Cold Shutdown Justification To achieve full flow through Check valves and 2-CH-225, 227 and 229, the boric acid transfer pumps must be set at high speed, which could inject enough boric acid into the reactor coolant system to cause a reactor power transient.

Under.normal plant operating conditions or when the plant is shutdow~, yalve 2-CH-MOV-2350 can be full stroke exercised and valves 2-CH-225, 227 and 229 can be part stroked exercised with the boric acid transfer pumps.set on low speed to minimize the amount of boric acid injected into the reactor coolant system.

However, during power operation when the concentration of boric acid in the reactor coolant system is low, the addition of boric acid will produce an und_esirable transient in reactor power.

  • Low concentrations of boric acid occur* near the end of the fuel cycle.

Manual valve 2-CH-228 will be stroked open when the alternate boration path is established every cold shutdown.

The increased level of safety gained be exercising this valve every quarter does not justify the added burden of performing a separate test just for the manual valve.

Valve 2-CH-MOV-2350 will be full stroke exercised and check valves 2-CH-225, 227 and 229 will be part stroked exercised every quarter during normal operation when the reactor coolant boric acid concentration is above 100 ppm.

Check valves 2-CH-225, 227 and 229, and manual valve 2-CH-228 will be full stroked exercised every cold shutdown.

4-74 S2PV-6R3 Rev. 3 March 19, 1992 l:".'!11

System..

COLD SHUTDOWN JUSTIFICATION CSV-20 Chemical and Volume Control Valve(s):

2-CH-309 category:

AC Class 2

Function:

Normal Charging Isolation Check Valve Cold Shutdown Justification Closure testing of 1-CH-309 cannot be performed during power operation because the*test would interrupt the normal charging flow path.

4-75 S2PV-6R3 Rev. 3 March 19, 1992 1

COLD SHUTDOWN JUSTIFICATION CSV-21 System steam Generator Blowdown Valve(s):

2-BD-TV-200A 2-BD-TV-200B 2-BD-TV-200C Category:

B Class 2

2-BD-TV-200D 2-BD-TV-200E 2-BD-TV-200F Function:

steam Generator Blowdown Isolation Cold Shutdown Justification Closing these valves during power operation causes the downstream piping to become empty due to drainage and water flashing to steam.

When the valves reopen, a flow surge could occur which automatically isolates the inner valves due to high flow.

Then a

.containment entry is necessary to reset these valves and ~pon reopening the process may occur.again

COLD SHUTDOWN JUSTIFICATION CSV-22 Cold Shutdown Justification Withdrawn COLD SHUTDOWN JUSTIFICATION CSV-23 Replaced by Relief Request V-43 COLD SHUTDOWN JUSTIFICATION CSV-24 Cold Shutdown Justification Withdrawn 4-77 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-25 System Safety Injection Valve(s):

2-SI-MOV-2842 2-SI-MOV-2869A 2-SI-MOV-2869B Category:

A Class 2

Function:

High Head Safety*Injection to reactor Coolant System Cold Shutdown Justification These.valves cannot ~e partial or full stroke exercised during power operation.

Opening these valves would allow excess charging-flow into the Reactor Coolant System causing a reactivity transient and possible thermal shock to the High Head Safety _Injection System.

Also, according to Technical Specification 3.3.A.9, A. C. power shall be removed with the valves in the closed position during power operation..

4-78 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-26 System Component Cooling Valve(s):

2-CC-181 2-CC-185 Category:

B (manual)

Class 3

Function:

Component Cooling Supply/Return to/from RHR Heat Exchanger Isolation Valves Cold Shutdown Justification A containment entry is required to exercise these manual butterfly valves.

Therefore, they will be exercised every cold shutdown.

4-79 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-27 System Component Cooling Valve(s):

2-CC-TV-207 2-CC-TV-220A 2-CC-TV-220B 2-CC-TV-220C category:

B Class 3

Function:

Component Cooling Return from Reactor Coolant Pump Thermal Barrier Isolation Valves Cold Shutdown Justification Exercising these valves during normal operation would isolate.*

component cooling water to the reactor coolant pump thermal barriers.

Cooling water mµst be available to the reactor coolant pump thermal barriers when the reactor coolant system temperature is above 200 °F.

Col°d shutdown is entered when the reactor coolant system temperature drops below 200 °F.

The valve controllers do not allow for a part stroke exercise test.

These valves will be full stroke tested every cold shutdown.

4-80 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDO~ JUSTIFICATION CSV-28 system Feedwater Valve(s):

2-FW-FCV-2478 2-FW-FCV-2488 2-FW-FCV-2498 Category:

B Class NC 2-FW-FCV-255A 2-FW-FCV-255B 2-FW-FCV-255C Function:

Main Feedwater Regulating and Regulating Bypass Isolation Valves Cold Shutdown Justification These valves are in positions required to sustain power operation.

Full stroke exercising the valves would result in a reactor trip.

The main feedwater regulating valves 2-FW-FCV-2478, 2488 and 2498 move during normal operation as they perform their regulating function.

The bypass valves 2-FW-FCV-255A, B and C remain closed during power operation.

These valves will be part stroke exercised every three months and full stroke exercised every cold shutdown.

4-81 S2PV-6R3 Rev. 3 March 19, 1992

System COLD SHUTDOWN JUSTIFICATION CSV-29 Safety Injection V_alve (s):

2-SI-109 2-SI-130 2-SI-147 Category:

C Class 1

Function:

SI Accumulator Discharge Isolation Check Valve Cold Shutdown Justification These check valves are located inside containment and are back seat tested using the installed sampling system.

To ensure that all of the leakage that could pass by the check valves is collected, the accumulator discharge motor operated valves (2-SI-MOV-2865A, Band C) must be closed.

However, these motor operated valves must be open and de-energized when the reactor coolant system pressure is above 1000 psig according to Technical Specification Paragraph 3.3.A.10.

Therefore, the accumulator check valves will be tested to the closed position every cold shutdown.

4.,..a2 S2PV-6R3 Rev. 3 March 19, 19,92

COLD SHUTDOWN JUSTIFICATION CSV-30 System.

Component Cooling Valve(s):

2-CC-806 category:

C Class 3

Function:

Charging Pump Seal Cooling Surge Tank Makeup Valve Cold Shutdown Justification This valve must open to provide a flow path from the component cooling water system to the charging pump seal water surge tank as a supply of makeup water to the surge tank.* There is no flow instrumentation to verify partial or full flow for the check valve.

There is level instrumentation on the surge tank.

The surge tank can be isolated, dr,ained down and refilled.

However, the surge tank provides the NPSH for the charging pump cooling water pumps and it should not be isolated from the system during normal operation when component cooling.water for the charging pumps is required.

This valve will be tested to the full open position every cold shutdown.

4-83 S2PV-6R3 Rev. 3 March 19, 1992

COLD SHUTDOWN JUSTIFICATION CSV-31 System Component Cooling Valve(s):

2-CC-LCV-201 Category:

B Class 3

Function:

Charging Pump Seal Cooling Surge Tank Level Control Valve Cold Shutdown Justification This valve must open to maintain the level in the charging.pump seal water surge tank and must close to prevent overflowing the surge tank and potentially draining the surge tank through the over flow line.

The valve fails closed on lose of operating air.

Valve position is determine solely from tank level.

In order to manipulate the valve for testing, the surge tank must be isolated.

However, the surge tank providei the NPSH for the charging pump cooling water pumps and it should not be isolated from the system during normal operation when component cooling water for the charging pumps is required.

This valve will be exercise to the open_and closed positions every cold shutdown.

4-84 S2PV-6R3 Rev. 3 March 19, 1992

4.7 ALTERNATIVE TESTING FOR NON-CODE VALVES S2PV-6R3 According to the minutes of public meeting on Gen~-c Letter 89-04, "Paragraph (g) of 10CFR 50.55a requires the use of Section XI of the-ASME Code for inservice testing of components covered by the Code.

For other components important to safety, the licensee also has the burden of demonstrating their continued operability."

The minutes go on to state that, "The Code-required IST program is a reasonable vehicle to provide a periodic demonstration of the operability of pumps and valves not covere4 by the Code.

If non-Code components are included in the ASME Code IST program (or some other licensee-developed inservice testing program) and certain Code provisions cannot be met, the Commission regulations (10 CFR 50.55a) do not require a

'request for relief' to be submitted to the staff.

Nevertheless, documentation that provides assurance. of the continued operability of the non-Code components through the performed tests should be available at the plant site."

Non-Code components are components that are important to safety but are not in systems or portions of systems that are classified ASME Class 1, 2 or 3.

Surry Power Station*has elected to include certain non-Code components in the ASME IST program.

Where the Code provisions cannot be met for non-Code components, alternative testing is performed that is adequate to ensure continued operability.

The alternate testing is described in this section.

There may be other deviations from Code provisions that are not described

  • in this section.

For these cases, documentation is available at the plant site.

As indicated in the minutes of public,meeting on Generic Letter 89-04, a 'request for relief' need not be submitted for non-Code components.

Therefore, the alternative tests described in this section are not

'requests for relief' but are provided for information.

The procedure of providing alternative testing descriptions instead of requests for relief for non-Code components begins with Revision 3.

Requests for relief that were approved by the NRC in Revision 2 for non-Code components will remai~ in place.

4-85 Rev. 3 March 19, 1992

NON-CODE ALTERNATIVE TESTING VNC-1 System Instrument Air Valve(s):

2-IA-381 2-IA-384 2-IA-395 category:

c Class NC 2-IA-396 2-IA-947 2-IA-948 Function:

Bottled Air system Supply/Isolation Section XI Code Requirements Which Cannot Be Met Measure flow to verify full stroke.

Exercise valves every three months.

Basis For Alternate Testing Valves 2-IA-381-, 384 and 947 must close to ensure that bottled air is available to actuate the.main valves (2-RC-PCV~2455C, 2-RC-PCV-2456 1 and 2-MS-SOV-202A and B).

Valves 2-IA-395, 396 and 948. must open to allow bottled air to reach the main valves.

There is no direct means to measure the flow of air through the check valves.

However, after the instrument air system is isolated and the lines vented, the stroke times of the main valves are measured and compared to acceptance criteria.

Measuring the stroke times provides indirect eVidence that valves 2-IA-395, 396 and 948 open properly and that valves 2-IA-381, 384 and 947 close properly.

The performance of this test renders the main valves inoperable; therefore~ the tests cannot be performed during normal operation.

After stroking the main valves with the air bottles, the air bottles must be replaced.

The safety gained in testing the valves every cold shutdown versus every reactor refueling does not justify the burden of replacing the air bottles on the more frequent basis.

4-86 S2PV-6R3 Rev. 3 March 19, 1992

NON-CODE ALTERNATIVE TESTING VNC-1 (Cont.)

Alternative Testing Valves 2-IA-381, 384 and 947 will be tested closed and valves 2-IA-395, 396 and 948 will be tested open by isolating and venting the instrument air lines, and then stroking the main valves with the bottled air.

fhe stroke times of the main valves will be measured and compared to acceptance criteria.

This test will be performed every reactor refueling.

4-87 S2PV-6R3 Rev. 3 March 19, 1992

NON-CODE ALTERNATIVE TESTING VNC-2 System Circulating Water Valve(s):

2-CW-117 Category:

B (manual)

Class NC Function:

Discharge Tunnel Vent Valve Section XI Code Requirements Which Cannot Be Met Exercise valve every three months.

Basis For Alternate Testing This valve is located on a line. from the discharge tunnel to the discharge canal.

The valve is opened.following*the initiation of an event to reduce the vacuum in the discharge tunnel which reduces the flow rate through the essential heat exchangers.

By reducing the flow rater cooling water in~entory is conserved in the intake canal.

Full or partial opening of this valve during normal operation or during cold shutdown will reduce cooling to the component cooling system and the bearing cooling system which will disrupt plant operations.

Alternative Testing This valve will be exercised every reactor refueling.

4-88 S2PV-6R3 Rev. 3 March 19, 1992

NON-CODE ALTERNATIVE TESTING VNC-3 System Emergency Generator Valve(s):

2-EG-43 2-EG-44 Category:

B (2-EG-43,44)

C (2-EG-45,46)

Class NC*

2-EG-45 2-EG-46 Function:

2-EG-43,44 EOG Starting Air/Drive Air Control/Relay Valves 2-EG-45,46 EOG Air start Pressure Equalizing Check Valves Section Xi Code Requirements Which cannot Be Met For valves 2-EG-43,44, measure stroke time.

For valves 2-EG-45,46, measure flow to verify full open Basis For Alternate Testing Valves 2-EG-43 and 44 are air pilot valves that open to supply drive air to the EDG air starting motors.

These valves have actuation times considerably under a second and there is no visual reference on the valve to observe the stroke; therefore, the stroke time cannot be measured.

Valves 2-EG-45 and 46 are check valves that close to prevent opening the air start valves before the air motor pinion gears are fully engaged.

They open to ensure that the air motor pinions remain engaged (hold-in feature) when the air motors are operating.

The only indication of the proper operation of the check valves is the proper operation of the pinion gears.

The.

air pilot valves and the check valves work in concert with the air start solenoid valves to start the emergency diesels upon demand within the required time.

4-89 S2PV-6R3 Rev. 3 March 19, 1992

NON-CODE ALTERNATIVE TESTING VNC-3 (Cont.)

Alternative Testing These valves will be stroke tested quarterly by observing that the valves perform their intended function, which is to start the diesel engines.

Adequate performance of the valves will be verified by recording the time it takes for the diesel engines to reach a predetermined RPM and comparing the time to an acceptance criterion.

Also, the failure of these valves to perform will promptly give a diesel engine trouble alarm.

Further investigation would identify problems with the operability of these valves.

4-90 S2PV-6R3 Rev. 3 March 19, 1992

5.0 REPORTING OF INSERVICE TEST RESULTS 5.1 PUMP INSERVICE PROGRAM Records of Pump Inservice Tes*t Results will be in accordance with the intent of Article IWP~6000.

Files will be established for each pump and will include:

1)

Pump identification by equipment number, manufacturer and serial number.

2)

The record of test shall include:

a) date of test, b) measured and observed quantities, c) identification of instruments used, d) comparison with allowable ranges of test valves and analysis of deviations, e) requirements for corrective actions, and f) conducting and analyzing the test

3)

Inservice test plans.

~his may be by surveillance test procedure by which the pump is tested with reference drawing.

4) summaries of corrective action some by maintenance report_ number, etc.

The Pump Inservice Test Program, associated surveillance test procedures and results will be kept at Surry Power Station.

They will be available for audit by the Authorized Nuclear Inservice Inspector and

  • the NRC.

5.2 VALVE INSERVICE PROGRAM S2PV-6R3 Records of Valve Inservice Test Results will be in accordance with the intent of Article IWV-6000, files will be established for each valve and will include:

1)

Valve identification by equipment number, manufacturer, size, valve type, actuator type.

2)

The record of test*shall include:

a) date of test, b) measured and observes quantities where applicable, c) identification of instruments used where applicable, 4-91 Rev. 3 March 19, 1992

S2PV-6R3

.d) comparisons with allowable ranges of test valves and analysis of deviations, e) maintenance history, and f) signature of the person or persons responsible for conducting and analyzing the test.

3) summaries of maintenance history may be maintenance report numbers, etc.

The Valve Inservice Test Program, associated surveillance test procedures and results will be kept at Surry Power station.

They will be available for audit by the Authorized Nuclear*

Inservice Inspector and the NRC.

4-92 Rev. 3.

March 19, 1992

6.0 QUALITY ASSURANCE PROGRAM The Pump and Valve Inservice Test Program activities will be conducted in accordance with the Nuclear Operat~ons Department Standards Manual and Technical Specifications for Surry Power Station.

4-93 S2PV-6R3 Rev. 3 March 19, 1992

Retrieved from "https://kanterella.com/w/index.php?title=ML18151A371&oldid=4988447"