ML18100A819: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
| issue date = 12/31/1993 | | issue date = 12/31/1993 | ||
| title = Monthly Operating Rept for Dec 1993 for Salem Generating Station Unit 2.W/940112 Ltr | | title = Monthly Operating Rept for Dec 1993 for Salem Generating Station Unit 2.W/940112 Ltr | ||
| author name = | | author name = Heller R, Shedlock M, Vondra C | ||
| author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY | | author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY | ||
| addressee name = | | addressee name = | ||
Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:Pub'lic Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038 Salem Generating Station January 12, 1994 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555 | {{#Wiki_filter:.PS~G* | ||
Pub'lic Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038 Salem Generating Station January 12, 1994 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555 | |||
==Dear Sir:== | ==Dear Sir:== | ||
MONTHLY OPERATING REPORT SALEM NO. 2 DOCKET NO. 50-311 In compliance with Section 6.9.1.6, Reporting Requirements for the Salem Technical Specifications, the original copy of the monthly operating reports for the month of December 1993 are being sent to you. | |||
*I DAILY UNIT POWER Docket No.: 50-311 Unit Name: Salem #2 Date: 01-10-94 Completed by: Mark Shedlock Telephone: | MONTHLY OPERATING REPORT SALEM NO. 2 DOCKET NO. 50-311 In compliance with Section 6.9.1.6, Reporting Requirements for the Salem Technical Specifications, the original copy of the monthly operating reports for the month of December 1993 are being sent to you. | ||
339-2122 Month December 1994 Day Average Daily Power Level Day Average Daily Power Level (MWe-NET) (MWe-NET) 1 1064 17 0 2 1117 18 0 3 949 19 0 4 0 20 0 5 0 21 0 6 0 22 0 7 0 23 0 8 0 24 0 9 0 25 0 10 0 26 0 11 0 27 0 12 0 28 0 13 0 29 0 14 0 30 0 15 0 31 0 16 0 P. 8.1-7 R1 OPERATING DATA REPORT Docket No: 50-311 Date: 01/10/94 Completed by: Mark Shedlock Telephone: | Average Daily Unit Power Level Operating Data Report Unit Shutdowns and Power Reductions Safety Related Maintenance 10CFR50.59 Evaluations Operating Summary Refueling Information Salem Operations RH:pc cc: Mr. Thomas T. Martin Regional Administrator USNRC Region I 631 Park Avenue King of Prussia, PA 19046 Enclosures 8-l-7.R4 The Energy__People 9401210133 6g655~11 95-2189 (10M) 12-89 | ||
339-2122 Operating Status 1. Unit Name Salem No. 2 Notes 2. Reporting Period December 1993 3. Licensed Thermal Power (MWt) 3411 4. Nameplate Rating (Gross MWe) 1170 5. Design Electrical Rating (Net MWe) 1115 6. Maximum Dependable Capacity(Gross MWe) 1149 7. Maximum Dependable Capacity (Net MWe) 1106 8. If Changes Occur in Capacity Ratings (items 3 through 7) since Last Report, Give Reason NA 9. Power Level to Which Restricted, if any (Net MWe) N/A 10. Reasons for Restrictions, if any | ~DR ADOCK PDR | ||
~ERAGE L~ | |||
*I DAILY UNIT POWER Docket No.: 50-311 Unit Name: Salem #2 Date: 01-10-94 Completed by: Mark Shedlock Telephone: 339-2122 Month December 1994 Day Average Daily Power Level Day Average Daily Power Level (MWe-NET) (MWe-NET) 1 1064 17 0 2 1117 18 0 3 949 19 0 4 0 20 0 5 0 21 0 6 0 22 0 7 0 23 0 8 0 24 0 9 0 25 0 10 0 26 0 11 0 27 0 12 0 28 0 13 0 29 0 14 0 30 0 15 0 31 0 16 0 P. 8.1-7 R1 | |||
OPERATING DATA REPORT ~ | |||
Docket No: 50-311 Date: 01/10/94 Completed by: Mark Shedlock Telephone: 339-2122 Operating Status | |||
JANUARY 10, 1994 R. HELLER (609)339-5162 | : 1. Unit Name Salem No. 2 Notes | ||
VALVE | : 2. Reporting Period December 1993 | ||
: 3. Licensed Thermal Power (MWt) 3411 | |||
- | : 4. Nameplate Rating (Gross MWe) 1170 | ||
: 5. Design Electrical Rating (Net MWe) 1115 | |||
: 6. Maximum Dependable Capacity(Gross MWe) 1149 | |||
: 7. Maximum Dependable Capacity (Net MWe) 1106 | |||
: 8. If Changes Occur in Capacity Ratings (items 3 through 7) since Last Report, Give Reason NA | |||
: 9. Power Level to Which Restricted, if any (Net MWe) N/A | |||
: 10. Reasons for Restrictions, if any ~~~~N--=A=--~~~~~~~~~~~~~~- | |||
I This Month Year to Date Cumulative | |||
: 11. Hours in Reporting Period 744 8760 107113 | |||
: 12. No. of Hrs. Rx. was Critical 71.85 5513.96 69279.56 | |||
: 13. Reactor Reserve Shutdown Hrs. 0 0 0 | |||
: 14. Hours Generator On-Line 71.85 5331.06 66889.52 | |||
: 15. Unit Reserve Shutdown Hours 0 0 0 | |||
: 16. Gross Thermal Energy Generated (MWH) 230541. 6 17367249.6 162462939.4 Gross Elec. Energy Generated (MWH) 78460 5839030 70546518 | |||
: 18. Net Elec. Eriergy Gen. (MWH) 63068 5541301 67127277 | |||
: 19. Unit Service Factor 9.7 60.9 62.4 | |||
: 20. Unit Availability Factor 9.7 60.9 62.4 | |||
: 21. Unit Capacity Factor (using MDC Net) 7.7 57.2 56.7 | |||
: 22. Unit Capacity Factor (using DER Net) 7.6 56.7 56.2 | |||
: 23. Unit Forced outage Rate 90.3 20.4 22.7 | |||
: 24. Shutdowns scheduled over next 6 months (type, date and duration of each) | |||
NONE | |||
: 25. If shutdown at end of Report Period, Estimated Date of Startup: | |||
January 5, 1994. | |||
8-l-7.R2 | |||
UNIT SHUTDOWN AND POWER REDUCTIONS REPORT MONTH DECEMBER 1993 DOCKET NO. 50-272 UNIT NAME Salem #2 DATE 01-10-94 COMPLETED BY Mark Shedlock TELEPHONE 339-2122 METHOD OF SHUTTING LICENSE 1 | |||
DURATION DOWN EVENT SYSTEM COMPONENT CAUSE AND CORRECTIVE ACTION NO. DATE TYPE (HOURS) REASON 2 REACTOR REPORT # CODE 4 CODE 5 TO PREVENT RECURRENCE 0053 12-03-93 F 672.15 A 1 --------- EE GENERA OTHER AC INSTRUMENT POWER PROBLEMS 1 2 3 4 5 F: Forced Reason Method: Exhibit G - Instructions Exhibit 1 - Same S: Scheduled A-Equipment Failure (explain) 1-Manual for Preparation of Data Source B-Maintenance or Test 2-Manual Scram Entry Sheets for Licensee C-Refuel ing 3-Automatic Scram Event Report CLER) File D-Requlatory Restriction 4-Continuation of CNUREG-0161) | |||
E-Operator Training & License Examination Previous Outage F-Administrative 5-Load Reduction G-Operational Error (Explain) 9-0ther H-Other (Explain) | |||
SAF~TY RELATED MAINTEN.E MONTH: - DECEMBER 1993 DOCKETttO: | |||
UNIT NAME: | |||
The Station Operations Review Committee has reviewed and concurs with these evaluations. | 50-311 SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 WO NO UNIT EQUIPMENT IDENTIFICATION 930510124 2 VALVE 2CC160 FAILURE DESCRIPTION: VALVE NEEDS REPACK 931023099 2 24 ACCUMULATOR TANK LEVEL ALARM FAILURE DESCRIPTION: NO ALARM INDICATION - INVESTIGATE | ||
ITEM | & CORRECT 931206134 2 22 STEAM GENERATOR LEVEL INDICATION FAILURE DESCRIPTION: 23 S/G NARROW RANGE LEVEL INDICATION READS 5%> THE REST - | ||
INVESTIGATE 931211129 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: LEFT SIDE JACKET WATER LEAK - | |||
REWORK 931221135 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: INLET JACKET.WATER PUMP HEATER STARTUP CONTROL SWITCH ARCING - | |||
TROUBLESHOOT 931223059 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: PANEL 2PNL11833 ALARMING, UNABLE TO RESET - REWORK 931223098 2 23 ACCUMULATOR FAILURE DESCRIPTION: LEVEL CHANNEL DISCREPANCY - | |||
INVESTIGATE 931223146 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: LOW OIL PRESSURE TRIP ALARM NOT INDICATING - TROUBLESHOOT 931223147 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: MECHANICAL OVERSPEED LIMIT SWITCH NOT MAKING UP - INVESTIGATE | |||
e SAFETY RELATED MAINTENANCE e | |||
DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (Cont'd) | |||
WO NO UNIT EQUIPMENT IDENTIFICATION 931225121 2 VALVE 22SW54 FAILURE DESCRIPTION: VALVE OPERATOR CHATTERS - REPLACE 931227086 2 SSPS TRAIN B FAILURE DESCRIPTION: TRAIN B FAILED SLAVE RELAY TEST - | |||
REWORK 931227096 2 24 LOOP DELTA T INDICATION FAILURE DESCRIPTION: 24 LOOP DELTA T INDICATION DRIFTING - REWORK 931227117 2 2SWE76 EXPANSION JOINT FAILURE DESCRIPTION: FLANGE GASKETS LEAK - REPLACE 931227119 2 2SWE79 EXPANSION JOINT FAILURE DESCRIPTION: FLANGE GASKETS LEAK - REPLACE 931227135 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: LEFT SIDE ROCKER ARM CHECK VALVE LEAKS - REPAIR 931228088 2 VALVE 22SW76 FAILURE DESCRIPTION: VALVE OPERATOR CHATTERS - REPLACE 931228089 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: PRELUBE PUMP MOTOR OUTPUT FLOW CONTROL SWITCH NOT FUNCTIONING - | |||
REWORK OR REPLACE 931229107 2 2R41 SAMPLE PUMP FAILURE DESCRIPTION: SAMPLE PUMP LOW FLOW - | |||
INVESTIGATE | |||
* SAF.~TY RELATED MAINTEN,CE MONTH: - DECEMBER 1993 DOCKE~O: | |||
UNIT NAME: | |||
50-311 SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (Cont'd) | |||
WO NO UNIT EQUIPMENT IDENTIFICATION 931229128 2 VALVE 2RH2 FAILURE DESCRIPTION: VALVE WILL NOT OPEN - | |||
TROUBLESHOOT AND CORRECT 931229151 2 VALVE 22BF13 FAILURE DESCRIPTION: 22 S/G INLET MOV NOT STROKING OPEN - TROUBLESHOOT & REPAIR | |||
.. e e | |||
* 10CFR50.59 EVALUATIONS DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 The following items were evaluated in accordance with the provisions of the Code of Federal Regulations 10CFR50.59. The Station Operations Review Committee has reviewed and concurs with these evaluations. | |||
ITEM | |||
==SUMMARY== | ==SUMMARY== | ||
A. Design Change Packages 2EC-3242 Pkg 1 "Fuel Handling Building Ventilation Upgrade" -This DCP entails modifications to the Unit 2 Fuel Handling Area Ventilation System which are summarized as follows: 1.) Replace backdraft dampers (2VHE505 & 2VHE506); | |||
2.) Replace the inlet guide vanes and their operators on the Fuel Handling Area exhaust fans No. 21 & 22. 3.) Remove the existing control loop instrumentation for the Unit 2 Fuel Handling Area supply fan (2VHE24) inlet guide vanes; 4.) Remove the Unit 2 Fuel Handling Area Truck Bay exhaust fan 2VHE23, damper 2VHE504; 5.) Install gravity type pressure relief damper 2VHE868 and fixed louver 2VHE504 in the truck bay areas; 6.) Replace the adjustable motor sheaves and V-belts for the Unit 2 Fuel Handling Area supply fan (2VHE24); | A. Design Change Packages 2EC-3242 Pkg 1 "Fuel Handling Building Ventilation Upgrade" - This DCP entails modifications to the Unit 2 Fuel Handling Area Ventilation System which are summarized as follows: 1.) Replace backdraft dampers (2VHE505 & 2VHE506); 2.) Replace the inlet guide vanes and their operators on the Fuel Handling Area exhaust fans No. 21 & 22. 3.) Remove the existing control loop instrumentation for the Unit 2 Fuel Handling Area supply fan (2VHE24) inlet guide vanes; 4.) Remove the Unit 2 Fuel Handling Area Truck Bay exhaust fan 2VHE23, damper 2VHE504; 5.) Install gravity type pressure relief damper 2VHE868 and fixed louver 2VHE504 in the truck bay areas; 6.) | ||
7.) Replace the adjustable motor sheaves and V-belts for the No. 21 & 22 Fuel Handling Area exhaust fans 2VHE20 & 2VHE21; 8.) Replace inlet and discharge flexible connections on the Unit No. 2 Fuel Handling Area supply fan (1VHE24) and the No. 21 & 22 Fuel Handling Area exhaust fans 2VHE20 & 2VHE21; 9.) Install new flow and static pressure test ports on fan inlet and discharge ducts; 10.) Install discharge screens on the supply air duct openings; 11.) Replace Fuel Handling Area differential pressure switches; 12.) The Fuel Handling Area humidity monitoring system will be abandoned in place (This was previously evaluated in Safety Evaluation S-C-M941-MSE-234, Rev. O) and the applicable documentation will be revised under this DCP to reflect this abandonment. | Replace the adjustable motor sheaves and V-belts for the Unit 2 Fuel Handling Area supply fan (2VHE24); | ||
These modifidations will not result in any changes to system operating parameters. | 7.) Replace the adjustable motor sheaves and V-belts for the No. 21 & 22 Fuel Handling Area exhaust fans 2VHE20 & 2VHE21; 8.) Replace inlet and discharge flexible connections on the Unit No. 2 Fuel Handling Area supply fan (1VHE24) and the No. 21 & 22 Fuel Handling Area exhaust fans 2VHE20 & 2VHE21; 9.) | ||
Therefore, this proposal will not reduce the margin of safety as defined in the basis for any Technical Specification. (SORC 93-105) | Install new flow and static pressure test ports on fan inlet and discharge ducts; 10.) Install discharge screens on the supply air duct openings; 11.) Replace Fuel Handling Area differential pressure switches; 12.) The Fuel Handling Area humidity monitoring system will be abandoned in place (This was previously evaluated in Safety Evaluation S-C-M941-MSE-234, Rev. O) and the applicable documentation will be revised under this DCP to reflect this abandonment. These modifidations will not result in any changes to system operating parameters. Therefore, this proposal will not reduce the margin of safety as defined in the basis for any Technical Specification. (SORC 93-105) | ||
.. e | |||
* 10CFR50.59 EVALUATIONS MONTH: -DECEMBER 1993 | .. e e | ||
* 10CFR50.59 EVALUATIONS DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (cont'd) | |||
ITEM | |||
==SUMMARY== | ==SUMMARY== | ||
The system pressure will be monitored by the P-250 computer. | 2EC-3211 Pkg 1 "SGFP/Condensate Pump/Feedwater Heaters System Design Pressure Modification" Rev. 4 - The purpose of this DCP is to provide a high pressure trip setpoint for the 21 and 22 Steam Generator Feedwater Pump (SGFP) turbines at 1620 psig. Two new transmitters will be installed on the discharge piping of each f eedwater pump and by modifying the existing trip circuitry, the feed pump will trip (2/2 logic) on a high feed pump discharge pressure. | ||
High and Low alarm limits will be installed at 1350 psig and 700 psig to notify the operator when conditions have approached a pump trip pressure or a transmitter failure respectively. | The system pressure will be monitored by the P-250 computer. High and Low alarm limits will be installed at 1350 psig and 700 psig to notify the operator when conditions have approached a pump trip pressure or a transmitter failure respectively. | ||
Setpoint corrections of 5000 gpm and 5500 gpm will be made to the 21, 22 and 23 condensate pump recirculation flow control loops to ensure a maximum sustained pressure of approximately 625 psig. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 93-107) "Service Water Pump Upgrade, No. 26 Pump" -The 2SWE6 replacement Service Water Pump will be compatible with brackish river water, able to withstand the high silt flows, and designed for a NPSHa at 76 feet river water level. The replacement pump will be designed to operate in parallel with the existing pumps, and will use the existing motor and floor opening. The new pump will be designed to operate over a wider range of flows based on past plant operating experience. | Setpoint corrections of 5000 gpm and 5500 gpm will be made to the 21, 22 and 23 condensate pump recirculation flow control loops to ensure a maximum sustained pressure of approximately 625 psig. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. | ||
Minor modifications to the Service Water Intake structure are required. | (SORC 93-107) 2EC-3259 Pkg 1 "Service Water Pump Upgrade, No. 26 Pump" - The 2SWE6 replacement Service Water Pump will be compatible with brackish river water, able to withstand the high silt flows, and designed for a NPSHa at 76 feet river water level. The replacement pump will be designed to operate in parallel with the existing pumps, and will use the existing motor and floor opening. The new pump will be designed to operate over a wider range of flows based on past plant operating experience. Minor modifications to the Service Water Intake structure are required. | ||
This includes the removal of the Seismic Restraint on Elevation 70 feet. The installation of a vortex suppressor on elevation 70 feet. The and removal of the existing Service Water Pump's line shaft bearing lubrication supply piping. The replacement pump does not require line shaft bearing lubrication. | This includes the removal of the Seismic Restraint on Elevation 70 feet. The installation of a vortex suppressor on elevation 70 feet. The decommi~sioning and removal of the existing Service Water Pump's line shaft bearing lubrication supply piping. The replacement pump does not require line shaft bearing lubrication. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 93-108) | ||
There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 93-108) | * 10CFR50.59 EVALUATIONS e e DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (cont'd) | ||
* 10CFR50.59 EVALUATIONS | ITEM | ||
==SUMMARY== | ==SUMMARY== | ||
* corrosive environment. | 2EC-3201 Pkg 1 "Circulating Bearing Lube Piping Replacement" - The design change package is summarized as follows: 1.) | ||
There is no reduction in the margin of safety as defined in the basis for any -Technical Specification. (SORC 93-108) | Replace existing CW pump bearing lube water header with ABCO A-150 fiberglass piping (SPS39). Existing piping material is cement-lined carbon steel; 2.) | ||
Replace existing heat tracing with a new Raychem system compatible with the new piping material; 3.) | |||
Install valve 2CW54 in accordance with design drawing; 4.) Replace existing 3/4 11 threaded valves 2CW44, 2CW5 and 2CW902 with new flanged globe valves; 5.) Install 8 new supports, one at each of the bearing lube water strainer discharges (to support valves 21CW4 and 22CW4) and one at each of the header; 6.) Modify existing supports along header line to accommodate new support arrangements for the fiberglass pipe, and 7.) Replace existing insulation with 1n fiberglass and stainless steel lagging. The reason for the above listed changes is to increase system durability under erosive/ | |||
* corrosive environment. There is no reduction in the margin of safety as defined in the basis for any | |||
-Technical Specification. (SORC 93-108) | |||
SALEM GENERATING STATION MONTHLY OPERATING | |||
==SUMMARY== | ==SUMMARY== | ||
-UNIT 2 DECEMBER 1993 The Unit began the period operating at full power and continued to operate at essentially full power until December 3, 1993, when it was shutdown due to the December 2, 1993 failure of the 2C Emergency Diesel Generator (EDG) 3R cylinder liner. The Unit remained offline throughout the remainder of the month while an extensive investigation of the 2C EDG cylinder liner failure was conducted. | - UNIT 2 DECEMBER 1993 SALEM UNIT NO. 2 The Unit began the period operating at full power and continued to operate at essentially full power until December 3, 1993, when it was shutdown due to the December 2, 1993 failure of the 2C Emergency Diesel Generator (EDG) 3R cylinder liner. The Unit remained offline throughout the remainder of the month while an extensive investigation of the 2C EDG cylinder liner failure was conducted. The repairs and testing of 2C EDG were completed and the period ended with a Unit heatup in progress. | ||
The repairs and testing of 2C EDG were completed and the period ended with a Unit heatup in progress. | |||
- REFUELING INFORMATION MONTH: - DECEMBER 1993 | |||
* DOCKET NO: UNIT NAME: DATE: COMPLETED BY | * DOCKET NO: | ||
UNIT NAME: | |||
: 2. Scheduled date for next refueling: | DATE: | ||
SEPTEMBER 24, 1994 3. Scheduled date for restart following refueling: | COMPLETED BY: | ||
NOVEMBER 22, 1994 4. a) Will Technical Specification changes or other license amendments be required?: | 50-311 SALEM 2 JANUARY 10, 1994 R. HELLER TELEPHONE: (609)339-5162 MONTH DECEMBER 1993 | ||
YES NO NOT DETERMINED TO DATE b) Has the reload fuel design been reviewed by the Station Operating Review Committee?: | : 1. Refueling information has changed from last month: | ||
YES NO If no, when is it scheduled?: | YES X NO | ||
OCTOBER 94 5. Scheduled date(s) for submitting proposed licensing action: N/A 6. Important licensing considerations associated with refueling: | : 2. Scheduled date for next refueling: SEPTEMBER 24, 1994 | ||
: 3. Scheduled date for restart following refueling: NOVEMBER 22, 1994 | |||
: 4. a) Will Technical Specification changes or other license amendments be required?: | |||
YES NO NOT DETERMINED TO DATE ~=X~- | |||
b) Has the reload fuel design been reviewed by the Station Operating Review Committee?: | |||
YES NO ~~X~~ | |||
If no, when is it scheduled?: OCTOBER 94 | |||
: 5. Scheduled date(s) for submitting proposed licensing action: | |||
N/A | |||
: 6. Important licensing considerations associated with refueling: | |||
: 7. Number of Fuel Assemblies: | : 7. Number of Fuel Assemblies: | ||
: a. Incore 193 b. In Spent Fuel storage | : a. Incore 193 | ||
* 492 8. Present licensed spent fuel storage capacity: | : b. In Spent Fuel storage | ||
1170 Future spent fuel storage capacity: | * 492 | ||
: 8. Present licensed spent fuel storage capacity: 1170 Future spent fuel storage capacity: 1170 | |||
March 2003 * -This figure has been corrected. | : 9. Date of last refueling that can be discharged to the spent fuel pool assuming the present licensed capacity: March 2003 | ||
* - This figure has been corrected. | |||
8-l-7.R4}} | 8-l-7.R4}} |
Latest revision as of 06:04, 3 February 2020
ML18100A819 | |
Person / Time | |
---|---|
Site: | Salem ![]() |
Issue date: | 12/31/1993 |
From: | Heller R, Shedlock M, Vondra C Public Service Enterprise Group |
To: | NRC OFFICE OF INFORMATION RESOURCES MANAGEMENT (IRM) |
References | |
NUDOCS 9401210133 | |
Download: ML18100A819 (12) | |
Text
.PS~G*
Pub'lic Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038 Salem Generating Station January 12, 1994 U.S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555
Dear Sir:
MONTHLY OPERATING REPORT SALEM NO. 2 DOCKET NO. 50-311 In compliance with Section 6.9.1.6, Reporting Requirements for the Salem Technical Specifications, the original copy of the monthly operating reports for the month of December 1993 are being sent to you.
Average Daily Unit Power Level Operating Data Report Unit Shutdowns and Power Reductions Safety Related Maintenance 10CFR50.59 Evaluations Operating Summary Refueling Information Salem Operations RH:pc cc: Mr. Thomas T. Martin Regional Administrator USNRC Region I 631 Park Avenue King of Prussia, PA 19046 Enclosures 8-l-7.R4 The Energy__People 9401210133 6g655~11 95-2189 (10M) 12-89
~DR ADOCK PDR
~ERAGE L~
- I DAILY UNIT POWER Docket No.: 50-311 Unit Name: Salem #2 Date: 01-10-94 Completed by: Mark Shedlock Telephone: 339-2122 Month December 1994 Day Average Daily Power Level Day Average Daily Power Level (MWe-NET) (MWe-NET) 1 1064 17 0 2 1117 18 0 3 949 19 0 4 0 20 0 5 0 21 0 6 0 22 0 7 0 23 0 8 0 24 0 9 0 25 0 10 0 26 0 11 0 27 0 12 0 28 0 13 0 29 0 14 0 30 0 15 0 31 0 16 0 P. 8.1-7 R1
OPERATING DATA REPORT ~
Docket No: 50-311 Date: 01/10/94 Completed by: Mark Shedlock Telephone: 339-2122 Operating Status
- 1. Unit Name Salem No. 2 Notes
- 2. Reporting Period December 1993
- 3. Licensed Thermal Power (MWt) 3411
- 4. Nameplate Rating (Gross MWe) 1170
- 5. Design Electrical Rating (Net MWe) 1115
- 6. Maximum Dependable Capacity(Gross MWe) 1149
- 7. Maximum Dependable Capacity (Net MWe) 1106
- 8. If Changes Occur in Capacity Ratings (items 3 through 7) since Last Report, Give Reason NA
- 9. Power Level to Which Restricted, if any (Net MWe) N/A
- 10. Reasons for Restrictions, if any ~~~~N--=A=--~~~~~~~~~~~~~~-
I This Month Year to Date Cumulative
- 11. Hours in Reporting Period 744 8760 107113
- 12. No. of Hrs. Rx. was Critical 71.85 5513.96 69279.56
- 13. Reactor Reserve Shutdown Hrs. 0 0 0
- 14. Hours Generator On-Line 71.85 5331.06 66889.52
- 15. Unit Reserve Shutdown Hours 0 0 0
- 16. Gross Thermal Energy Generated (MWH) 230541. 6 17367249.6 162462939.4 Gross Elec. Energy Generated (MWH) 78460 5839030 70546518
- 18. Net Elec. Eriergy Gen. (MWH) 63068 5541301 67127277
- 19. Unit Service Factor 9.7 60.9 62.4
- 20. Unit Availability Factor 9.7 60.9 62.4
- 21. Unit Capacity Factor (using MDC Net) 7.7 57.2 56.7
- 22. Unit Capacity Factor (using DER Net) 7.6 56.7 56.2
- 23. Unit Forced outage Rate 90.3 20.4 22.7
- 24. Shutdowns scheduled over next 6 months (type, date and duration of each)
NONE
- 25. If shutdown at end of Report Period, Estimated Date of Startup:
January 5, 1994.
8-l-7.R2
UNIT SHUTDOWN AND POWER REDUCTIONS REPORT MONTH DECEMBER 1993 DOCKET NO. 50-272 UNIT NAME Salem #2 DATE 01-10-94 COMPLETED BY Mark Shedlock TELEPHONE 339-2122 METHOD OF SHUTTING LICENSE 1
DURATION DOWN EVENT SYSTEM COMPONENT CAUSE AND CORRECTIVE ACTION NO. DATE TYPE (HOURS) REASON 2 REACTOR REPORT # CODE 4 CODE 5 TO PREVENT RECURRENCE 0053 12-03-93 F 672.15 A 1 --------- EE GENERA OTHER AC INSTRUMENT POWER PROBLEMS 1 2 3 4 5 F: Forced Reason Method: Exhibit G - Instructions Exhibit 1 - Same S: Scheduled A-Equipment Failure (explain) 1-Manual for Preparation of Data Source B-Maintenance or Test 2-Manual Scram Entry Sheets for Licensee C-Refuel ing 3-Automatic Scram Event Report CLER) File D-Requlatory Restriction 4-Continuation of CNUREG-0161)
E-Operator Training & License Examination Previous Outage F-Administrative 5-Load Reduction G-Operational Error (Explain) 9-0ther H-Other (Explain)
SAF~TY RELATED MAINTEN.E MONTH: - DECEMBER 1993 DOCKETttO:
UNIT NAME:
50-311 SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 WO NO UNIT EQUIPMENT IDENTIFICATION 930510124 2 VALVE 2CC160 FAILURE DESCRIPTION: VALVE NEEDS REPACK 931023099 2 24 ACCUMULATOR TANK LEVEL ALARM FAILURE DESCRIPTION: NO ALARM INDICATION - INVESTIGATE
& CORRECT 931206134 2 22 STEAM GENERATOR LEVEL INDICATION FAILURE DESCRIPTION: 23 S/G NARROW RANGE LEVEL INDICATION READS 5%> THE REST -
INVESTIGATE 931211129 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: LEFT SIDE JACKET WATER LEAK -
REWORK 931221135 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: INLET JACKET.WATER PUMP HEATER STARTUP CONTROL SWITCH ARCING -
TROUBLESHOOT 931223059 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: PANEL 2PNL11833 ALARMING, UNABLE TO RESET - REWORK 931223098 2 23 ACCUMULATOR FAILURE DESCRIPTION: LEVEL CHANNEL DISCREPANCY -
INVESTIGATE 931223146 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: LOW OIL PRESSURE TRIP ALARM NOT INDICATING - TROUBLESHOOT 931223147 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: MECHANICAL OVERSPEED LIMIT SWITCH NOT MAKING UP - INVESTIGATE
e SAFETY RELATED MAINTENANCE e
DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (Cont'd)
WO NO UNIT EQUIPMENT IDENTIFICATION 931225121 2 VALVE 22SW54 FAILURE DESCRIPTION: VALVE OPERATOR CHATTERS - REPLACE 931227086 2 SSPS TRAIN B FAILURE DESCRIPTION: TRAIN B FAILED SLAVE RELAY TEST -
REWORK 931227096 2 24 LOOP DELTA T INDICATION FAILURE DESCRIPTION: 24 LOOP DELTA T INDICATION DRIFTING - REWORK 931227117 2 2SWE76 EXPANSION JOINT FAILURE DESCRIPTION: FLANGE GASKETS LEAK - REPLACE 931227119 2 2SWE79 EXPANSION JOINT FAILURE DESCRIPTION: FLANGE GASKETS LEAK - REPLACE 931227135 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: LEFT SIDE ROCKER ARM CHECK VALVE LEAKS - REPAIR 931228088 2 VALVE 22SW76 FAILURE DESCRIPTION: VALVE OPERATOR CHATTERS - REPLACE 931228089 2 2C DIESEL GENERATOR FAILURE DESCRIPTION: PRELUBE PUMP MOTOR OUTPUT FLOW CONTROL SWITCH NOT FUNCTIONING -
REWORK OR REPLACE 931229107 2 2R41 SAMPLE PUMP FAILURE DESCRIPTION: SAMPLE PUMP LOW FLOW -
INVESTIGATE
- SAF.~TY RELATED MAINTEN,CE MONTH: - DECEMBER 1993 DOCKE~O:
UNIT NAME:
50-311 SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (Cont'd)
WO NO UNIT EQUIPMENT IDENTIFICATION 931229128 2 VALVE 2RH2 FAILURE DESCRIPTION: VALVE WILL NOT OPEN -
TROUBLESHOOT AND CORRECT 931229151 2 VALVE 22BF13 FAILURE DESCRIPTION: 22 S/G INLET MOV NOT STROKING OPEN - TROUBLESHOOT & REPAIR
.. e e
- 10CFR50.59 EVALUATIONS DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 The following items were evaluated in accordance with the provisions of the Code of Federal Regulations 10CFR50.59. The Station Operations Review Committee has reviewed and concurs with these evaluations.
ITEM
SUMMARY
A. Design Change Packages 2EC-3242 Pkg 1 "Fuel Handling Building Ventilation Upgrade" - This DCP entails modifications to the Unit 2 Fuel Handling Area Ventilation System which are summarized as follows: 1.) Replace backdraft dampers (2VHE505 & 2VHE506); 2.) Replace the inlet guide vanes and their operators on the Fuel Handling Area exhaust fans No. 21 & 22. 3.) Remove the existing control loop instrumentation for the Unit 2 Fuel Handling Area supply fan (2VHE24) inlet guide vanes; 4.) Remove the Unit 2 Fuel Handling Area Truck Bay exhaust fan 2VHE23, damper 2VHE504; 5.) Install gravity type pressure relief damper 2VHE868 and fixed louver 2VHE504 in the truck bay areas; 6.)
Replace the adjustable motor sheaves and V-belts for the Unit 2 Fuel Handling Area supply fan (2VHE24);
7.) Replace the adjustable motor sheaves and V-belts for the No. 21 & 22 Fuel Handling Area exhaust fans 2VHE20 & 2VHE21; 8.) Replace inlet and discharge flexible connections on the Unit No. 2 Fuel Handling Area supply fan (1VHE24) and the No. 21 & 22 Fuel Handling Area exhaust fans 2VHE20 & 2VHE21; 9.)
Install new flow and static pressure test ports on fan inlet and discharge ducts; 10.) Install discharge screens on the supply air duct openings; 11.) Replace Fuel Handling Area differential pressure switches; 12.) The Fuel Handling Area humidity monitoring system will be abandoned in place (This was previously evaluated in Safety Evaluation S-C-M941-MSE-234, Rev. O) and the applicable documentation will be revised under this DCP to reflect this abandonment. These modifidations will not result in any changes to system operating parameters. Therefore, this proposal will not reduce the margin of safety as defined in the basis for any Technical Specification. (SORC 93-105)
.. e e
- 10CFR50.59 EVALUATIONS DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (cont'd)
ITEM
SUMMARY
2EC-3211 Pkg 1 "SGFP/Condensate Pump/Feedwater Heaters System Design Pressure Modification" Rev. 4 - The purpose of this DCP is to provide a high pressure trip setpoint for the 21 and 22 Steam Generator Feedwater Pump (SGFP) turbines at 1620 psig. Two new transmitters will be installed on the discharge piping of each f eedwater pump and by modifying the existing trip circuitry, the feed pump will trip (2/2 logic) on a high feed pump discharge pressure.
The system pressure will be monitored by the P-250 computer. High and Low alarm limits will be installed at 1350 psig and 700 psig to notify the operator when conditions have approached a pump trip pressure or a transmitter failure respectively.
Setpoint corrections of 5000 gpm and 5500 gpm will be made to the 21, 22 and 23 condensate pump recirculation flow control loops to ensure a maximum sustained pressure of approximately 625 psig. There is no reduction in the margin of safety as defined in the basis for any Technical Specification.
(SORC 93-107) 2EC-3259 Pkg 1 "Service Water Pump Upgrade, No. 26 Pump" - The 2SWE6 replacement Service Water Pump will be compatible with brackish river water, able to withstand the high silt flows, and designed for a NPSHa at 76 feet river water level. The replacement pump will be designed to operate in parallel with the existing pumps, and will use the existing motor and floor opening. The new pump will be designed to operate over a wider range of flows based on past plant operating experience. Minor modifications to the Service Water Intake structure are required.
This includes the removal of the Seismic Restraint on Elevation 70 feet. The installation of a vortex suppressor on elevation 70 feet. The decommi~sioning and removal of the existing Service Water Pump's line shaft bearing lubrication supply piping. The replacement pump does not require line shaft bearing lubrication. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 93-108)
- 10CFR50.59 EVALUATIONS e e DOCKET NO: 50-311 MONTH: - DECEMBER 1993 UNIT NAME: SALEM 2 DATE: JANUARY 10, 1994 COMPLETED BY: R. HELLER TELEPHONE: (609)339-5162 (cont'd)
ITEM
SUMMARY
2EC-3201 Pkg 1 "Circulating Bearing Lube Piping Replacement" - The design change package is summarized as follows: 1.)
Replace existing CW pump bearing lube water header with ABCO A-150 fiberglass piping (SPS39). Existing piping material is cement-lined carbon steel; 2.)
Replace existing heat tracing with a new Raychem system compatible with the new piping material; 3.)
Install valve 2CW54 in accordance with design drawing; 4.) Replace existing 3/4 11 threaded valves 2CW44, 2CW5 and 2CW902 with new flanged globe valves; 5.) Install 8 new supports, one at each of the bearing lube water strainer discharges (to support valves 21CW4 and 22CW4) and one at each of the header; 6.) Modify existing supports along header line to accommodate new support arrangements for the fiberglass pipe, and 7.) Replace existing insulation with 1n fiberglass and stainless steel lagging. The reason for the above listed changes is to increase system durability under erosive/
- corrosive environment. There is no reduction in the margin of safety as defined in the basis for any
-Technical Specification. (SORC 93-108)
SALEM GENERATING STATION MONTHLY OPERATING
SUMMARY
- UNIT 2 DECEMBER 1993 SALEM UNIT NO. 2 The Unit began the period operating at full power and continued to operate at essentially full power until December 3, 1993, when it was shutdown due to the December 2, 1993 failure of the 2C Emergency Diesel Generator (EDG) 3R cylinder liner. The Unit remained offline throughout the remainder of the month while an extensive investigation of the 2C EDG cylinder liner failure was conducted. The repairs and testing of 2C EDG were completed and the period ended with a Unit heatup in progress.
- REFUELING INFORMATION MONTH: - DECEMBER 1993
- DOCKET NO:
UNIT NAME:
DATE:
COMPLETED BY:
50-311 SALEM 2 JANUARY 10, 1994 R. HELLER TELEPHONE: (609)339-5162 MONTH DECEMBER 1993
- 1. Refueling information has changed from last month:
YES X NO
- 2. Scheduled date for next refueling: SEPTEMBER 24, 1994
- 3. Scheduled date for restart following refueling: NOVEMBER 22, 1994
- 4. a) Will Technical Specification changes or other license amendments be required?:
YES NO NOT DETERMINED TO DATE ~=X~-
b) Has the reload fuel design been reviewed by the Station Operating Review Committee?:
YES NO ~~X~~
If no, when is it scheduled?: OCTOBER 94
- 5. Scheduled date(s) for submitting proposed licensing action:
N/A
- 6. Important licensing considerations associated with refueling:
- 7. Number of Fuel Assemblies:
- a. Incore 193
- b. In Spent Fuel storage
- 492
- 8. Present licensed spent fuel storage capacity: 1170 Future spent fuel storage capacity: 1170
- 9. Date of last refueling that can be discharged to the spent fuel pool assuming the present licensed capacity: March 2003
- - This figure has been corrected.
8-l-7.R4