ML18101A705: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
| issue date = 04/30/1995 | | issue date = 04/30/1995 | ||
| title = Monthly Operating Rept for Apr 1995 for Salem Unit 1.W/ 950512 Ltr | | title = Monthly Operating Rept for Apr 1995 for Salem Unit 1.W/ 950512 Ltr | ||
| author name = | | author name = Phillips R, Summers J | ||
| author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY | | author affiliation = PUBLIC SERVICE ELECTRIC & GAS CO. OF NEW JERSEY | ||
| addressee name = | | addressee name = | ||
Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter: | {{#Wiki_filter:e PS~G Public Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038-0236 Nuclear Business Unit May 12, 1995 U. S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555 Attn.: Document Control Desk MONTHLY OPERATING REPORT SALEMNO. 1 DOCKET NO: 50-272 In compliance with Section 6.9.1.6, Reporting Requirements for the Salem Technical Specifications, the original copy of the monthly operating reports for the month of April are being sent to you. | ||
339-2735 | Sincerely yours, John C. Summers General Manager - | ||
Salem Operations RH:vls Enclosures C Mr. Thomas T. Martin Regional Administrator USNRC, Region I 631 Park Avenue King of Prussia, PA 19046 8-1-7.R4 r- ... 9505180218 950430- . . . . ._, | |||
PDR ADOCK. 0.5000272 R PDR. | |||
: | The power is in yom hands. | ||
95-2168 REV. 6/94 L | |||
* 20. Unit Availability Factor | |||
tlERAGE DAILY UNIT POWER LE~ | |||
B-Maintenance or Test C-Refuel ing | Docket No.: 50-272 Unit Name: Salem #1 Date: 05/10/95 Completed by: Robert Phillips Telephone: 339-2735 Month APRIL 1995 Day Average Daily Power Level Day Average Daily Power Level (MWe-NET) (MWe-NET) 1 1004 17 1059 2 1044 18 1059 3 1050 19 1059 4 1055 20 1043 5 1075 21 1085 6 1037 22 1000 7 1030 23 1066 8 1050 24 1036 9 1049 25 1057 10 1051 26 1049 11 1051 27 1113 12 1046 28 986 13 1046 29 1084 14 1054 30 1018 15 1054 31 16 1050 P. 8.1-7 Rl L | ||
H-Other (Explain) | |||
e OPERATING DATA REPORT e Doc.ket No: 50-272 Date: 05/10/95 Completed by: Robert Phillips Telephone: 339-2735 Operating status | |||
: 1. J, t Uni Name S a 1 em N o. | |||
The | * 1 Notes | ||
: 2. Reporting Period April 1995 | |||
: 3. Licensed Thermal Power (MWt) 3411 | |||
: 4. Nameplate Rating (Gross MWe) 1170 | |||
: 5. Design Electrical Rating (Net MWe) 1115 | |||
: 6. Maximum Dependable Capacity(Gross MWe) 1149 | |||
: 7. Maximum Dependable Capacity (Net MWe) 1106 | |||
: 8. If Changes Occur in Capacity Ratings (items 3 through 7) since Last Report, Give Reason~~N--=A~~~~~~~~~~~~~~~~~~~~~~~~ | |||
: 9. Power Level to Which Restricted, if any (Net MWe) N/A | |||
: 10. Reasons for Restrictions, if any ~~~~~~~N~A=-~~~~~~~~~~~ | |||
This Month Year to Date cumulative | |||
Therefore, operation of the transformer without fans is acceptable. | : 12. Hours in Reporting Period 719 2879 156336 | ||
There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035) "Salem Service Water Expansion Joint Bolting Material" Rev. 0 -This evaluation addresses concerns pertaining to bolting used in the Salem Service Water discharge line. Attachment I identified six (6) concerns relating to the use of potentially inappropriate bolting in the Salem Service Water System (SWS). Four (4) of the concerns dealt with the bolting on four of the pump discharge expansion joints adjacent to the SWS pumps Nos. 13, 24 and 25. The other two (2) dealt with the small diameter chlorination injection line flanged connection bolting. The potential for stress related bolt failure in these areas exists. As outlined in Attachment 1, the concern evolves around the use of 10CFR50.59 EVALUATIONS MONTH: APRIL 1995 | : 12. No. of Hrs. Rx. was Critical 719 2273.6 103993.15 | ||
R. HELLER 609-339-5162 stainless steel bolting (ASTM Al 93 Gr. B8 -Type 304 or equivalent) instead of the specified carbon steel bolting (ASTM A913 Gr B7) and the potential exists for overstressing of the lower strength B8 material. | : 13. Reactor Reserve Shutdown Hrs. 0 0 0 | ||
All of the concerns identified are for some type of pipeline flange connections and, as such, are not normally wetted by system fluid. Additionally, the above six concerns are normally wetted by system fluid. Additionally, the above six concerns are isolation to SWS Intake Structure Bays 1 and 4 only. All six concerns have been evaluated by Engineering. | : 14. Hours Generator On-Line 71-9 2246.06 100002.24 | ||
There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035) "POPS-Mass Addition of an ECCS Pump and PD Pump" Rev. 0 -The current Bases for TS 3.4.9.3 (Unit 1) and UFSAR Section 7.6.3.3 states that POPS has adequate relieving capability to protect the RCS from overpressurization when the transient is limited to either (1) the start of an idle RCP with the secondary water temperature of the steam generator less than or equal to 50°F above the RCS cold leg temperatures or (2) the start of a high head safety injection pump and its injection into a water solid RCS. Because of re-analysis associated with mass addition transients (performed as a result of Westinghouse letter dated 3/15/93 -Ref. LER 94-017), the Bases of this TS was changed on February 8, 1995, to reflect a mass addition transient associated with the injection of a high head safety injection pump only. This change reflected actual mass addition transient assumptions based on plant operating procedures and administrative controls for preventing the injection of an intermediate head safety injection pump into a water solid RCS or the injection of a high head safety injection pump in conjunction with an operating Positive Displacement (PD) pump for Unit 1. This change was also made to UFSAR Section 7.6.3.3 for the POPS Design Evaluation. | : 15. Unit Reserve Shutdown Hours 0 0 0 | ||
Injection of only the high 10CFR50.59 EVALUATIONS | : 16. Gross Thermal Energy Generated (MWH) 2325302.4 4952850.8 315004753.6 | ||
R. HELLER 609-339-5162 head SI pump into a water solid RCS would not exceed the PIT limits contained in TS 3.4.9.1 when in Mode 5 (<200°F) (Calculation S-C-RC-MDC-1413, Rev. 1). On February 13, 1995, the NRC approved ASME Code Case N-514 for use by Salem Units 1and2. This Code Case allows an additional 10% margin in the Pressure -Temperature limits contained in TS 3.4.9.1(Unit1) and 3.4.10.1(Unit2). | : 17. Gross Elec. Energy Generated (MWH) 785640 2422010 105033160 | ||
This 10% margin allows the operation of a High Head SI pump in conjunction with an operating positive displacement (PD) pump, or the operation of one Intermediate Head SI pump in Mode 5 without exceeding the PIT limits contained in the Technical Specifications. | : 18. Net Elec. Energy Gen. (MWH) 753981 2307254 99989418 | ||
Analysis of the mass addition transient due to the combined flow from the High Head SI pump and the PD pump bound the transient from the injection of an Intermediate Head SI pump. Therefore, the Unit 1 bases of TS 3.4.9.3 and UFSAR Section 7.6.3.3 for the mass addition is being revised to permit the operation of the PD pump along with the High Head SI pump or one Intermediate Head SI pump when in Mode 5. The margin of safety is not reduced. The change to the most limiting mass addition transient assumption (the injection of a High Head SI pump in conjunction with an operating PD pump into a water solid RCS) continues to ensure that the PIT limits are not exceeded when considering the additional 10% margin allowed by ASME Code Case N-514. The peak pressure from this proposed limiting mass addition transient is well below that allowed by the Code Case. The margin of safety is not reduced. (SORC 95-039) NC.NA-AP.ZZ-0012(Q) "Technical Specification Surveillance Program" Rev. 5 -The purpose of this revision is to change a commitment made in Violation Response NLR-N89176, dated 09106189, for SORC to review amendment readiness prior to 10CFR50.59 EVALUATIONS | : 19. Unit Service Factor | ||
R. HELLER 609-339-5162 implementation. | * 100 78.0 64. 0 | ||
This review is being replaced with a requirement to notify station management of station readiness prior to Technical Specification Amendment implementation. | : 20. Unit Availability Factor 100 78.0 64.0 | ||
There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-037) 5. Deficiency Reports (DR) Use-As-Is PR 950426165 "Salem Unit 1 Service Water Intake Bay Pipe Leak" Rev. 0 -The subject of this evaluation is a small through wall leak* discovered in a thirty inch carbon steel epoxy lined carbon steel Service Water pipe (spool 1-SW-98) during plant operation on | : 21. Unit Capacity Factor (using MDC Net) 94.8 72.5 57.8 | ||
: 22. Unit Capacity Factor (using DER Net) 94.0 71.9 57.4 | |||
The normal type of code repair for this type of problem would involve isolation and direct removal of the affected area of the pipe. The single valve isolation (3 0 inch butterfly valve) is not able to provide adequate isolation. | : 23. Unit Forced Outage Rate 0 22.0 | ||
The 30 inch class 3 moderate energy SW header with the through wall flaw has been demonstrated to be operable based on GL 90-05/GL 91-018 guidelines. | : 24. Shutdowns scheduled over next 6 months (type, date and duration of each) | ||
However the system is not considered to be fully qualified (note a through wall flaw does not meet the acceptance criteria o:f IBW-3600) as required by the ASl\ffi Section XI Code. It has been established that no safety concerns exist with continued operation of the system at this time even with consideration of the single failure criteria. | A 60 day refueling outage scheduled to start 9-9~95. | ||
: 25. If shutdown at end of Report Period, Estimated Date of Startup: | |||
N A. | |||
8-l-7.R2 | |||
UNIT SHUTDOWN AND POWER REDUCTIONS REPORT MONTH APRIL 1995 DOCKET NO. 50-272 UNIT NAME Salem #1 DATE 5-10-95 . . | |||
COMPLETED BY Robert Phillips TELEPHONE 609-339-2735 METHOD OF SHUTTING LICENSE DURATION DOWN EVENT SYSTEM COMPONENT CAUSE AND CORRECTIVE ACTION NO. DATE TYPE 1 (HOURS) REASON 2 REACTOR REPORT # CODE 4 CODE 5 TO PREVENT RECURRENCE | |||
----- NONE ----- | |||
1 2 3 4 5 F: Forced Reason Method: Exhibit G - Instructions Exhibit 1 - Same S: Scheduled A-Equipment Failure (explain) 1-Manual for Preparation of Data Source B-Maintenance or Test 2-Manual Scram Entry Sheets for Licensee C-Refuel ing 3-Automatic Scram Event Report CLER) File D-Requlatory Restriction 4-Continuation of CNUREG-0161) | |||
E-Operator Training & License Examination Previous Outage F-Administrative 5-Load Reduction G-Operational Error (Explain) 9-0ther H-Other (Explain) | |||
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/f0/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 The following items were evaluated in accordance with the provisions of the Code of Federal Regulations 10CFR50.59. The Station Operations Review Committee has reviewed and concurs with these evaluations. | |||
: 1. Design Change Packages (DCP) lEC-3239, Pkg. 1 "Service Water to the Station Air Compressors" Rev. 2 - | |||
The proposed changes replace piping and valves for the non-safety related portion of the service water (SW) system in the turbine building that provides cooling water to the three station air compressor (SAC) units. The valves within the piping replacement boundary will be replaced with valves of upgraded material and are compatible with the replacement piping material. Some valves are relocated from their original location without altering original function and flow direction. In addition to replacement valves, three new valves are being added to the system. The existing automatic isolation ST5 and ST6 air operated valves for each SAC will be replaced with Fisher Vee Ball valves with Fisher air operators. The Technical Specification has no applicability to Service Water in the Turbine Building nor is there any applicability to the station air system. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035) | |||
: 2. Temporary Modifications (T-Mod) 94-072 "Temporary Valve Tagging of 1ST2T and 1ST14T" Rev. 1 | |||
- The purpose of this temporary modification is to relabel/retag the existing old valves 1ST2 and 1ST14 as temporary valves 1ST2T and 1ST14T to facilitate implementation of the service water piping (for station air compressors) upgrades under DCP lEC-3239. Double valves (new permanent valves as part of the piping | |||
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 upgrades) will be installed directly adjacent to the existing valves under Phase 2 ofDCP lEC-3239. This will provide a boundary for piping replacement and ensure uninterrupted service water supplies to the station air compressors. There are no Technical Specifications associated with the Station Air or Control Air systems. This T-Mod has no impact on the bases section for the Service Water system. The Technical Specification basis for the required operability of at least two independent service water loops in Modes 1 to 4 is not affected by the proposed change. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035) 94-073 "Installation of Temporary SW Supply and Return Headers for SA Compressors" Rev. 1 - The purpose of this temporary modification is to supply service water to the Station Air Compressors (SACs) located in Unit 1 Turbine Building to support implementation ofDCP lEC-3239 which will replace the existing SAC service water piping with permanent 6% molybdenum upgraded piping as part of the overall service water upgrade project. There are no Technical Specifications associated with the Station Air or Control Air systems. This T-Mod has no impact on the bases section for the Service Water system. The Technical Specification basis for the required operability of at least two independent service water loops in Modes 1 to 4 is not affected by the proposed change. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035) | |||
: 3. Safety Evaluations (S/E) | |||
QA/NSR Procedures & "Section 13, Conduct of Operations; Section 17.2 Quality Functions Described in Assurance During the Operation Phase" - The purpose of Salem UFSAR this evaluation is to address the reorganization of QA/NSR. | |||
The reorganization of QA affects only personnel titles with respect to applicable Technical Specifications and Section | |||
IOCFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM I DATE: 05/10/95 COMPLETED BY: R.HELLER TELEPHONE: 609-339-5162 17.2 of the SAR. There is no reduction of QA functions described in the FSAR. The reorganization of NSR affects only personnel titles with respect to applicable Technical Specifications and Sections 13.1.1.2.1.4 and 13.4.4 of the SAR. There is no reduction of NSR functions described in the FSAR. There is no reduction in the margin of safety as described in the bases for any Technical Specifications. | |||
(SORC 95-028) | |||
S-1-460-ESE-0850 "Operation of lB 480 Volt Transformer Without Fans" Rev. 0 - The modification befog evaluated is the operation of the lB 4160-480 volt transformer without the availability of the fans that provide the necessary cooling for the transformer's FA rating of 13 33 KVA. This transformer is rated at 1000/1333 KVA per DCP lEC-3264, Pkg. 2. Per calculation ES-8.005 "4160-480 Volt Transformer Vital Loading" the worst case transformer loading occurs during normal plant operation and is 93 2.1 KVA. This worst case loading is within the AA rating of 1000 KVA and verifies that the fans are not required to support the existing loads on this transformer. Therefore, operation of the transformer without fans is acceptable. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035) | |||
S-C-SW-MSE-0849 "Salem Service Water Expansion Joint Bolting Material" Rev. 0 - This evaluation addresses concerns pertaining to bolting used in the Salem Service Water discharge line. | |||
Attachment I identified six (6) concerns relating to the use of potentially inappropriate bolting in the Salem Service Water System (SWS). Four (4) of the concerns dealt with the bolting on four of the pump discharge expansion joints adjacent to the SWS pumps Nos. 13, 24 and 25. The other two (2) dealt with the small diameter chlorination injection line flanged connection bolting. The potential for stress related bolt failure in these areas exists. As outlined in Attachment 1, the concern evolves around the use of | |||
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COI\1PLETED BY: R. HELLER TELEPHONE: 609-339-5162 stainless steel bolting (ASTM Al 93 Gr. B8 - Type 304 or equivalent) instead of the specified carbon steel bolting (ASTM A913 Gr B7) and the potential exists for overstressing of the lower strength B8 material. All of the concerns identified are for some type of pipeline flange connections and, as such, are not normally wetted by system fluid. Additionally, the above six concerns are normally wetted by system fluid. Additionally, the above six concerns are isolation to SWS Intake Structure Bays 1 and 4 only. All six concerns have been evaluated by Engineering. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. | |||
(SORC 95-035) | |||
TS Bases 3.4.9.3 "POPS-Mass Addition of an ECCS Pump and PD Pump" Rev. 0 - The current Bases for TS 3.4.9.3 (Unit 1) and UFSAR Section 7.6.3.3 states that POPS has adequate relieving capability to protect the RCS from overpressurization when the transient is limited to either (1) the start of an idle RCP with the secondary water temperature of the steam generator less than or equal to 50°F above the RCS cold leg temperatures or (2) the start of a high head safety injection pump and its injection into a water solid RCS. Because of re-analysis associated with mass addition transients (performed as a result of Westinghouse letter dated 3/15/93 - Ref. LER 94-017), the Bases of this TS was changed on February 8, 1995, to reflect a mass addition transient associated with the injection of a high head safety injection pump only. This change reflected actual mass addition transient assumptions based on plant operating procedures and administrative controls for preventing the injection of an intermediate head safety injection pump into a water solid RCS or the injection of a high head safety injection pump in conjunction with an operating Positive Displacement (PD) pump for Unit 1. | |||
This change was also made to UFSAR Section 7.6.3.3 for the POPS Design Evaluation. Injection of only the high | |||
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05110195 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 head SI pump into a water solid RCS would not exceed the PIT limits contained in TS 3.4.9.1 when in Mode 5 | |||
(<200°F) (Calculation S-C-RC-MDC-1413, Rev. 1). On February 13, 1995, the NRC approved ASME Code Case N-514 for use by Salem Units 1and2. This Code Case allows an additional 10% margin in the Pressure - | |||
Temperature limits contained in TS 3.4.9.1(Unit1) and 3.4.10.1(Unit2). This 10% margin allows the operation of a High Head SI pump in conjunction with an operating positive displacement (PD) pump, or the operation of one Intermediate Head SI pump in Mode 5 without exceeding the PIT limits contained in the Technical Specifications. | |||
Analysis of the mass addition transient due to the combined flow from the High Head SI pump and the PD pump bound the transient from the injection of an Intermediate Head SI pump. Therefore, the Unit 1 bases of TS 3.4.9.3 and UFSAR Section 7.6.3.3 for the mass addition is being revised to permit the operation of the PD pump along with the High Head SI pump or one Intermediate Head SI pump when in Mode 5. The margin of safety is not reduced. The change to the most limiting mass addition transient assumption (the injection of a High Head SI pump in conjunction with an operating PD pump into a water solid RCS) continues to ensure that the PIT limits are not exceeded when considering the additional 10% margin allowed by ASME Code Case N-514. The peak pressure from this proposed limiting mass addition transient is well below that allowed by the Code Case. The margin of safety is not reduced. (SORC 95-039) | |||
: 4. Procedures NC.NA-AP.ZZ-0012(Q) "Technical Specification Surveillance Program" Rev. 5 - | |||
The purpose of this revision is to change a commitment made in Violation Response NLR-N89176, dated 09106189, for SORC to review amendment readiness prior to | |||
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 implementation. This review is being replaced with a requirement to notify station management of station readiness prior to Technical Specification Amendment implementation. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. | |||
(SORC 95-037) | |||
: 5. Deficiency Reports (DR) Use-As-Is PR 950426165 "Salem Unit 1 Service Water Intake Bay Pipe Leak" Rev. 0 | |||
- The subject of this evaluation is a small through wall leak* | |||
discovered in a thirty inch carbon steel epoxy lined carbon steel Service Water pipe (spool 1-SW-98) during plant operation on Salem Unit 1. The system location is Intake Bay #3 downstream ofvalve 1SW17. UT examination has confirmed that it is localized corrosion. The local area of wall reduction is contained in approximately a 1.5 square inch grid on the 30 inch diamter pipe. The remaining areas of the pipe wall adjacent to the defect identify a significant margin in wall thickness above the minimum required value. | |||
For this situation, the code repair within the time frame of the applicable system LCO (3.7.4) would not be possible without adequate preparation. The normal type of code repair for this type of problem would involve isolation and direct removal of the affected area of the pipe. The single valve isolation (3 0 inch butterfly valve) is not able to provide adequate isolation. The 30 inch class 3 moderate energy SW header with the through wall flaw has been demonstrated to be operable based on GL 90-05/GL 91-018 guidelines. However the system is not considered to be fully qualified (note a through wall flaw does not meet the acceptance criteria o:f IBW-3600) as required by the ASl\ffi Section XI Code. It has been established that no safety concerns exist with continued operation of the system at this time even with consideration of the single failure criteria. | |||
Appropriate corrective actions in regard to performing a | Appropriate corrective actions in regard to performing a | ||
R. HELLER 609-339-5162 Code modification are being actively pursued with this effort and are expected to be completed promptly. | ~ 50-272 I 10CFR50.59 EVALUATIONS DOCKET NO: | ||
All of the conclusions of the licensing basis safety analysis remain valid, and thus the margin of safety is not reduced. (SORC 95-041) | I I MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 (Cont'd) | ||
REFUELING INFORMATION | Code modification are being actively pursued with this effort and are expected to be completed promptly. All of the conclusions of the licensing basis safety analysis remain valid, and thus the margin of safety is not reduced. | ||
(SORC 95-041) | |||
NO X Scheduled date for next refueling: | |||
September 9, 1995 Scheduled date for restart following refueling: | REFUELING INFORMATION DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R.HELLER TELEPHONE: 609-339-5162 MONTH : APRIL 1995 Refueling information has changed from last month: YES~NO X Scheduled date for next refueling: September 9, 1995 Scheduled date for restart following refueling: November 7, 1995 | ||
November 7, 1995 a. Will Technical Specification changes or other license amendments be required? | : a. Will Technical Specification changes or other license amendments be required? | ||
YES _A_ NO | YES _A_ NO ___ | ||
YES NO_,X_ Ifno, when is it scheduled? | NOT DETERMINED TO DATE | ||
September 1995 Scheduled date(s) for submitting proposed licensing action: | : b. Has the reload fuel design been reviewed by the Station Operating Review Committee? | ||
YES NO_,X_ | |||
Ifno, when is it scheduled? September 1995 Scheduled date(s) for submitting proposed licensing action: ---~NIA._ __ | |||
Important licensing considerations associated with refueling: | |||
Number of Fuel Assemblies: | Number of Fuel Assemblies: | ||
: a. Incore b. In Spent Fuel Storage Present licensed spent fuel storage capacity: | : a. Incore 193 | ||
Future spent fuel storage capacity: | : b. In Spent Fuel Storage 732 Present licensed spent fuel storage capacity: _1632_ _ | ||
Date oflast refueling that can be discharged to the spent fuel pool assuming the present licensed capacity: | Future spent fuel storage capacity: 1632 Date oflast refueling that can be discharged to the spent fuel pool assuming the present licensed capacity: September 2008 8-l-7.R4 | ||
8-l-7.R4 | |||
SALEM GENERATING STATION MONTHLY OPERATING | |||
==SUMMARY== | ==SUMMARY== | ||
-UNIT 1 APRIL 1995 SALEM UNIT NO. I The Unit continued to operate at 94% power throughout the entire of the period.}} | - UNIT 1 APRIL 1995 SALEM UNIT NO. I The Unit continued to operate at 94% power throughout the entire of the period.}} |
Latest revision as of 05:44, 3 February 2020
ML18101A705 | |
Person / Time | |
---|---|
Site: | Salem ![]() |
Issue date: | 04/30/1995 |
From: | Phillips R, Summers J Public Service Enterprise Group |
To: | NRC OFFICE OF INFORMATION RESOURCES MANAGEMENT (IRM) |
References | |
NUDOCS 9505180218 | |
Download: ML18101A705 (13) | |
Text
e PS~G Public Service Electric and Gas Company P.O. Box 236 Hancocks Bridge, New Jersey 08038-0236 Nuclear Business Unit May 12, 1995 U. S. Nuclear Regulatory Commission Document Control Desk Washington, DC 20555 Attn.: Document Control Desk MONTHLY OPERATING REPORT SALEMNO. 1 DOCKET NO: 50-272 In compliance with Section 6.9.1.6, Reporting Requirements for the Salem Technical Specifications, the original copy of the monthly operating reports for the month of April are being sent to you.
Sincerely yours, John C. Summers General Manager -
Salem Operations RH:vls Enclosures C Mr. Thomas T. Martin Regional Administrator USNRC, Region I 631 Park Avenue King of Prussia, PA 19046 8-1-7.R4 r- ... 9505180218 950430- . . . . ._,
The power is in yom hands.
95-2168 REV. 6/94 L
tlERAGE DAILY UNIT POWER LE~
Docket No.: 50-272 Unit Name: Salem #1 Date: 05/10/95 Completed by: Robert Phillips Telephone: 339-2735 Month APRIL 1995 Day Average Daily Power Level Day Average Daily Power Level (MWe-NET) (MWe-NET) 1 1004 17 1059 2 1044 18 1059 3 1050 19 1059 4 1055 20 1043 5 1075 21 1085 6 1037 22 1000 7 1030 23 1066 8 1050 24 1036 9 1049 25 1057 10 1051 26 1049 11 1051 27 1113 12 1046 28 986 13 1046 29 1084 14 1054 30 1018 15 1054 31 16 1050 P. 8.1-7 Rl L
e OPERATING DATA REPORT e Doc.ket No: 50-272 Date: 05/10/95 Completed by: Robert Phillips Telephone: 339-2735 Operating status
- 1. J, t Uni Name S a 1 em N o.
- 1 Notes
- 2. Reporting Period April 1995
- 3. Licensed Thermal Power (MWt) 3411
- 4. Nameplate Rating (Gross MWe) 1170
- 5. Design Electrical Rating (Net MWe) 1115
- 6. Maximum Dependable Capacity(Gross MWe) 1149
- 7. Maximum Dependable Capacity (Net MWe) 1106
- 8. If Changes Occur in Capacity Ratings (items 3 through 7) since Last Report, Give Reason~~N--=A~~~~~~~~~~~~~~~~~~~~~~~~
- 9. Power Level to Which Restricted, if any (Net MWe) N/A
- 10. Reasons for Restrictions, if any ~~~~~~~N~A=-~~~~~~~~~~~
This Month Year to Date cumulative
- 12. Hours in Reporting Period 719 2879 156336
- 12. No. of Hrs. Rx. was Critical 719 2273.6 103993.15
- 13. Reactor Reserve Shutdown Hrs. 0 0 0
- 14. Hours Generator On-Line 71-9 2246.06 100002.24
- 15. Unit Reserve Shutdown Hours 0 0 0
- 16. Gross Thermal Energy Generated (MWH) 2325302.4 4952850.8 315004753.6
- 17. Gross Elec. Energy Generated (MWH) 785640 2422010 105033160
- 18. Net Elec. Energy Gen. (MWH) 753981 2307254 99989418
- 19. Unit Service Factor
- 100 78.0 64. 0
- 20. Unit Availability Factor 100 78.0 64.0
- 21. Unit Capacity Factor (using MDC Net) 94.8 72.5 57.8
- 22. Unit Capacity Factor (using DER Net) 94.0 71.9 57.4
- 23. Unit Forced Outage Rate 0 22.0
- 24. Shutdowns scheduled over next 6 months (type, date and duration of each)
A 60 day refueling outage scheduled to start 9-9~95.
- 25. If shutdown at end of Report Period, Estimated Date of Startup:
N A.
8-l-7.R2
UNIT SHUTDOWN AND POWER REDUCTIONS REPORT MONTH APRIL 1995 DOCKET NO. 50-272 UNIT NAME Salem #1 DATE 5-10-95 . .
COMPLETED BY Robert Phillips TELEPHONE 609-339-2735 METHOD OF SHUTTING LICENSE DURATION DOWN EVENT SYSTEM COMPONENT CAUSE AND CORRECTIVE ACTION NO. DATE TYPE 1 (HOURS) REASON 2 REACTOR REPORT # CODE 4 CODE 5 TO PREVENT RECURRENCE
NONE -----
1 2 3 4 5 F: Forced Reason Method: Exhibit G - Instructions Exhibit 1 - Same S: Scheduled A-Equipment Failure (explain) 1-Manual for Preparation of Data Source B-Maintenance or Test 2-Manual Scram Entry Sheets for Licensee C-Refuel ing 3-Automatic Scram Event Report CLER) File D-Requlatory Restriction 4-Continuation of CNUREG-0161)
E-Operator Training & License Examination Previous Outage F-Administrative 5-Load Reduction G-Operational Error (Explain) 9-0ther H-Other (Explain)
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/f0/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 The following items were evaluated in accordance with the provisions of the Code of Federal Regulations 10CFR50.59. The Station Operations Review Committee has reviewed and concurs with these evaluations.
- 1. Design Change Packages (DCP) lEC-3239, Pkg. 1 "Service Water to the Station Air Compressors" Rev. 2 -
The proposed changes replace piping and valves for the non-safety related portion of the service water (SW) system in the turbine building that provides cooling water to the three station air compressor (SAC) units. The valves within the piping replacement boundary will be replaced with valves of upgraded material and are compatible with the replacement piping material. Some valves are relocated from their original location without altering original function and flow direction. In addition to replacement valves, three new valves are being added to the system. The existing automatic isolation ST5 and ST6 air operated valves for each SAC will be replaced with Fisher Vee Ball valves with Fisher air operators. The Technical Specification has no applicability to Service Water in the Turbine Building nor is there any applicability to the station air system. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035)
- 2. Temporary Modifications (T-Mod)94-072 "Temporary Valve Tagging of 1ST2T and 1ST14T" Rev. 1
- The purpose of this temporary modification is to relabel/retag the existing old valves 1ST2 and 1ST14 as temporary valves 1ST2T and 1ST14T to facilitate implementation of the service water piping (for station air compressors) upgrades under DCP lEC-3239. Double valves (new permanent valves as part of the piping
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 upgrades) will be installed directly adjacent to the existing valves under Phase 2 ofDCP lEC-3239. This will provide a boundary for piping replacement and ensure uninterrupted service water supplies to the station air compressors. There are no Technical Specifications associated with the Station Air or Control Air systems. This T-Mod has no impact on the bases section for the Service Water system. The Technical Specification basis for the required operability of at least two independent service water loops in Modes 1 to 4 is not affected by the proposed change. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035)94-073 "Installation of Temporary SW Supply and Return Headers for SA Compressors" Rev. 1 - The purpose of this temporary modification is to supply service water to the Station Air Compressors (SACs) located in Unit 1 Turbine Building to support implementation ofDCP lEC-3239 which will replace the existing SAC service water piping with permanent 6% molybdenum upgraded piping as part of the overall service water upgrade project. There are no Technical Specifications associated with the Station Air or Control Air systems. This T-Mod has no impact on the bases section for the Service Water system. The Technical Specification basis for the required operability of at least two independent service water loops in Modes 1 to 4 is not affected by the proposed change. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035)
- 3. Safety Evaluations (S/E)
QA/NSR Procedures & "Section 13, Conduct of Operations; Section 17.2 Quality Functions Described in Assurance During the Operation Phase" - The purpose of Salem UFSAR this evaluation is to address the reorganization of QA/NSR.
The reorganization of QA affects only personnel titles with respect to applicable Technical Specifications and Section
IOCFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM I DATE: 05/10/95 COMPLETED BY: R.HELLER TELEPHONE: 609-339-5162 17.2 of the SAR. There is no reduction of QA functions described in the FSAR. The reorganization of NSR affects only personnel titles with respect to applicable Technical Specifications and Sections 13.1.1.2.1.4 and 13.4.4 of the SAR. There is no reduction of NSR functions described in the FSAR. There is no reduction in the margin of safety as described in the bases for any Technical Specifications.
(SORC 95-028)
S-1-460-ESE-0850 "Operation of lB 480 Volt Transformer Without Fans" Rev. 0 - The modification befog evaluated is the operation of the lB 4160-480 volt transformer without the availability of the fans that provide the necessary cooling for the transformer's FA rating of 13 33 KVA. This transformer is rated at 1000/1333 KVA per DCP lEC-3264, Pkg. 2. Per calculation ES-8.005 "4160-480 Volt Transformer Vital Loading" the worst case transformer loading occurs during normal plant operation and is 93 2.1 KVA. This worst case loading is within the AA rating of 1000 KVA and verifies that the fans are not required to support the existing loads on this transformer. Therefore, operation of the transformer without fans is acceptable. There is no reduction in the margin of safety as defined in the basis for any Technical Specification. (SORC 95-035)
S-C-SW-MSE-0849 "Salem Service Water Expansion Joint Bolting Material" Rev. 0 - This evaluation addresses concerns pertaining to bolting used in the Salem Service Water discharge line.
Attachment I identified six (6) concerns relating to the use of potentially inappropriate bolting in the Salem Service Water System (SWS). Four (4) of the concerns dealt with the bolting on four of the pump discharge expansion joints adjacent to the SWS pumps Nos. 13, 24 and 25. The other two (2) dealt with the small diameter chlorination injection line flanged connection bolting. The potential for stress related bolt failure in these areas exists. As outlined in Attachment 1, the concern evolves around the use of
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COI\1PLETED BY: R. HELLER TELEPHONE: 609-339-5162 stainless steel bolting (ASTM Al 93 Gr. B8 - Type 304 or equivalent) instead of the specified carbon steel bolting (ASTM A913 Gr B7) and the potential exists for overstressing of the lower strength B8 material. All of the concerns identified are for some type of pipeline flange connections and, as such, are not normally wetted by system fluid. Additionally, the above six concerns are normally wetted by system fluid. Additionally, the above six concerns are isolation to SWS Intake Structure Bays 1 and 4 only. All six concerns have been evaluated by Engineering. There is no reduction in the margin of safety as defined in the basis for any Technical Specification.
(SORC 95-035)
TS Bases 3.4.9.3 "POPS-Mass Addition of an ECCS Pump and PD Pump" Rev. 0 - The current Bases for TS 3.4.9.3 (Unit 1) and UFSAR Section 7.6.3.3 states that POPS has adequate relieving capability to protect the RCS from overpressurization when the transient is limited to either (1) the start of an idle RCP with the secondary water temperature of the steam generator less than or equal to 50°F above the RCS cold leg temperatures or (2) the start of a high head safety injection pump and its injection into a water solid RCS. Because of re-analysis associated with mass addition transients (performed as a result of Westinghouse letter dated 3/15/93 - Ref. LER 94-017), the Bases of this TS was changed on February 8, 1995, to reflect a mass addition transient associated with the injection of a high head safety injection pump only. This change reflected actual mass addition transient assumptions based on plant operating procedures and administrative controls for preventing the injection of an intermediate head safety injection pump into a water solid RCS or the injection of a high head safety injection pump in conjunction with an operating Positive Displacement (PD) pump for Unit 1.
This change was also made to UFSAR Section 7.6.3.3 for the POPS Design Evaluation. Injection of only the high
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05110195 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 head SI pump into a water solid RCS would not exceed the PIT limits contained in TS 3.4.9.1 when in Mode 5
(<200°F) (Calculation S-C-RC-MDC-1413, Rev. 1). On February 13, 1995, the NRC approved ASME Code Case N-514 for use by Salem Units 1and2. This Code Case allows an additional 10% margin in the Pressure -
Temperature limits contained in TS 3.4.9.1(Unit1) and 3.4.10.1(Unit2). This 10% margin allows the operation of a High Head SI pump in conjunction with an operating positive displacement (PD) pump, or the operation of one Intermediate Head SI pump in Mode 5 without exceeding the PIT limits contained in the Technical Specifications.
Analysis of the mass addition transient due to the combined flow from the High Head SI pump and the PD pump bound the transient from the injection of an Intermediate Head SI pump. Therefore, the Unit 1 bases of TS 3.4.9.3 and UFSAR Section 7.6.3.3 for the mass addition is being revised to permit the operation of the PD pump along with the High Head SI pump or one Intermediate Head SI pump when in Mode 5. The margin of safety is not reduced. The change to the most limiting mass addition transient assumption (the injection of a High Head SI pump in conjunction with an operating PD pump into a water solid RCS) continues to ensure that the PIT limits are not exceeded when considering the additional 10% margin allowed by ASME Code Case N-514. The peak pressure from this proposed limiting mass addition transient is well below that allowed by the Code Case. The margin of safety is not reduced. (SORC 95-039)
- 4. Procedures NC.NA-AP.ZZ-0012(Q) "Technical Specification Surveillance Program" Rev. 5 -
The purpose of this revision is to change a commitment made in Violation Response NLR-N89176, dated 09106189, for SORC to review amendment readiness prior to
10CFR50.59 EVALUATIONS DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 implementation. This review is being replaced with a requirement to notify station management of station readiness prior to Technical Specification Amendment implementation. There is no reduction in the margin of safety as defined in the basis for any Technical Specification.
(SORC 95-037)
- 5. Deficiency Reports (DR) Use-As-Is PR 950426165 "Salem Unit 1 Service Water Intake Bay Pipe Leak" Rev. 0
- The subject of this evaluation is a small through wall leak*
discovered in a thirty inch carbon steel epoxy lined carbon steel Service Water pipe (spool 1-SW-98) during plant operation on Salem Unit 1. The system location is Intake Bay #3 downstream ofvalve 1SW17. UT examination has confirmed that it is localized corrosion. The local area of wall reduction is contained in approximately a 1.5 square inch grid on the 30 inch diamter pipe. The remaining areas of the pipe wall adjacent to the defect identify a significant margin in wall thickness above the minimum required value.
For this situation, the code repair within the time frame of the applicable system LCO (3.7.4) would not be possible without adequate preparation. The normal type of code repair for this type of problem would involve isolation and direct removal of the affected area of the pipe. The single valve isolation (3 0 inch butterfly valve) is not able to provide adequate isolation. The 30 inch class 3 moderate energy SW header with the through wall flaw has been demonstrated to be operable based on GL 90-05/GL 91-018 guidelines. However the system is not considered to be fully qualified (note a through wall flaw does not meet the acceptance criteria o:f IBW-3600) as required by the ASl\ffi Section XI Code. It has been established that no safety concerns exist with continued operation of the system at this time even with consideration of the single failure criteria.
Appropriate corrective actions in regard to performing a
~ 50-272 I 10CFR50.59 EVALUATIONS DOCKET NO:
I I MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R. HELLER TELEPHONE: 609-339-5162 (Cont'd)
Code modification are being actively pursued with this effort and are expected to be completed promptly. All of the conclusions of the licensing basis safety analysis remain valid, and thus the margin of safety is not reduced.
(SORC 95-041)
REFUELING INFORMATION DOCKET NO: 50-272 MONTH: APRIL 1995 UNIT NAME: SALEM 1 DATE: 05/10/95 COMPLETED BY: R.HELLER TELEPHONE: 609-339-5162 MONTH : APRIL 1995 Refueling information has changed from last month: YES~NO X Scheduled date for next refueling: September 9, 1995 Scheduled date for restart following refueling: November 7, 1995
- a. Will Technical Specification changes or other license amendments be required?
YES _A_ NO ___
NOT DETERMINED TO DATE
- b. Has the reload fuel design been reviewed by the Station Operating Review Committee?
YES NO_,X_
Ifno, when is it scheduled? September 1995 Scheduled date(s) for submitting proposed licensing action: ---~NIA._ __
Important licensing considerations associated with refueling:
Number of Fuel Assemblies:
- a. Incore 193
- b. In Spent Fuel Storage 732 Present licensed spent fuel storage capacity: _1632_ _
Future spent fuel storage capacity: 1632 Date oflast refueling that can be discharged to the spent fuel pool assuming the present licensed capacity: September 2008 8-l-7.R4
SALEM GENERATING STATION MONTHLY OPERATING
SUMMARY
- UNIT 1 APRIL 1995 SALEM UNIT NO. I The Unit continued to operate at 94% power throughout the entire of the period.