ML18024A335

Updated Final Safety Analysis Report (Ufsar), Amendment 27, 14.4 Table - Approach to Safety Analysis

ML18024A335
Person / Time
Site:	Browns Ferry
Issue date:	10/05/2017
From:	Tennessee Valley Authority
To:	Office of Nuclear Reactor Regulation
Shared Package
ML18018A778	List: ML18018A780 ML18018A781 ML18018A783 ML18018A784 ML18018A785 ML18018A787 ML18018A788 ML18018A790 ML18018A792 ML18018A793 ML18018A795 ML18018A796 ML18018A797 ML18018A798 ML18018A800 ML18018A801 ML18018A802 ML18018A804 ML18018A806 ML18018A807 ML18022A114 ML18022A115 ML18022A116 ML18022A117 ML18022A118 ML18022A119 ML18022A120 ML18022A121 ML18022A123 ML18022A124 ML18022A125 ML18022A127 ML18022A128 ML18022A129 ML18022A130 ML18022A131 ML18022A132 ML18022A133 ML18022A148 ML18022A155 ML18022A156 ML18022A157 ML18022A158 ML18022A159 ML18022A161 ML18022A162 ML18022A163 ML18022A164 ML18022A165 ML18022A166 ... further results
References
Download: ML18024A335 (3)

Text

BFN-16 TABLE 14.4-1 (Sheet 1)

PLANT SAFETY ANALYSIS

SUMMARY

OF ABNORMAL OPERATIONAL TRANSIENTS Undesired Parameter Event Causing Variation Transient Scram Caused by Nuclear system pressure Generator trip without Turbine control valve increase bypass fast closure Nuclear system pressure Turbine trip without Turbine stop valve increase bypass closure Nuclear system pressure Main steam line isolation Main steam line isolation increase valve closure valve closure Nuclear system pressure Loss of Condenser vacuum Turbine stop valve closure increase Nuclear system pressure Bypass valve malfunction Reactor vessel high pressure increase Nuclear system pressure Pressure regulator Reactor vessel high pressure increase malfunction Reactor water temperature Shutdown cooling malfunction High Neutron flux decrease decrease temperature Reactor water temperature Loss of feedwater heater* None decrease Reactor Water temperature Inadvertent pump start* None decrease Positive reactivity Continuous rod withdrawal None insertion during power range operation*

Positive reactivity Continuous rod withdrawal High neutron flux insertion during reactor startup*

Positive reactivity Control rod removal error High neutron flux insertion during refueling Positive reactivity Fuel assembly insertion High neutron flux insertion error during refueling Coolant inventory decrease Pressure regulator Main steam line isolation failure - open** valve closure Coolant inventory decrease Open main steam relief valve**

Coolant inventory decrease Loss of feedwater flow Reactor vessel low water level

• This transient results in no significant change in nuclear system pressure.

• • This transient results in a depressurization.

BFN-16 TABLE 14.4-1 (Sheet 2)

PLANT SAFETY ANALYSIS

SUMMARY

OF ABNORMAL OPERATIONAL TRANSIENTS Undesired Parameter Event Causing Variation Transient Scram Caused by Coolant inventory decrease Loss of auxiliary power Loss of power to reactor system protection Core flow decrease Recirculation flow control None failure - decreasing flow**

Core flow decrease Trip of one recirculation None pump**

Core flow decrease Trip of two recirculation None pumps**

Core flow increase Recirculation pump flow High neutron flux control failure increasing flow*

Core flow increase Startup of idle recirculation pump* None Excess of coolant Feedwater Controller Turbine stop valve closure inventory failure-maximum demand

• This transient results in no significant change in nuclear system pressure.

• • This transient results in a depressurization.

BFN-17 TABLE 14.4-2 PLANT SAFETY ANALYSIS RESULTS OF DESIGN BASIS ACCIDENTS Percent of Core Design Basis Reaching Cladding Peak Accident Temperature of 2200°F System Pressure Rod Drop Not applicable*** <1375 psig Accident Loss of Coolant 0 Not applicable*

Accident Refueling Accident 0 Not applicable**

Main Steam Line 0 Not applicable*

Break Accident

• This accident results in a depressurization.

• • This accident occurs with the reactor vessel head off.

• • • Peak fuel enthalpy is less than 280 cal/gm.