Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• ML18313A069  + (Request for Relief I4R-01 Related to the Inservice Inspection Program for Class 3 Buried High Density Polyethylene Piping)
• ML15064A125  + (Request for Relief I4R-01 from ASME Code Requirements for Replacement of Class 3 Essential Service Water Buried Piping with High Density Polyethylene Piping, for the Fourth 10-year Inservice Testing Interval)
• ML19291A018  + (Request for Relief I4R-07, Utilize Code Case N-513-4 - Evaluation Criteria for Temporary Acceptance of Flaws in Moderate Energy Class 2 or 3 Piping of American Society of Mechanical Engineers Boiler and Pressure Code Section XI)
• ML18283A049  + (Request for Relief I4R-6 from ASME Code Visual Examination Requirements for Reactor Vessel Head Penetration Nozzle Weld Specified by Code Case N-729-4)
• ML073390442  + (Request for Relief ISI-2007-1, to Use a Later Edition and Addenda of the ASME Code for Third 10-Year Inservice Inspection Interval - Repair/Replacement, Pressure Testing, and NDE Activities)
• ML073240437  + (Request for Relief ISI-3-28 - Approval to Use Alternatives to the Requirements of ASME Code for Repair/Replacement Activities Re Performance of Structural Weld Overlays (Tac Nos. MD6256 & MD6257))
• ULNRC-05064, Request for Relief Inservice Inspection Program, Ref. ULNRC-05024, 07/06/2004  + (Request for Relief Inservice Inspection Program, Ref. ULNRC-05024, 07/06/2004)
• ML18053A209  + (Request for Relief No. 03 Proposed Use of Alternative Requirements for Nozzle Inner Radius and Nozzle-to-Shell Weld Inspection for Fifth Inservice Inspection Interval (CAC No. MF9374; EPID L-2017-LLR-0110))
• ML042730334  + (Request for Relief No. 04-ON-008)
• ML051080093  + (Request for Relief No. 05-ON-003)
• ML082210392  + (Request for Relief No. 07-001-SS Regarding the Fourth 10-Year Interval Inservice Inspection Visual Examination of the Reactor Vessel Support Skirt)
• ML082890566  + (Request for Relief No. 08-CN-001, Limited Weld Examinations During the End-of-Cycle 15 Refueling Outage)
• ML021580448  + (Request for Relief No. 12 for the Unit 2 Third 10-Year Interval Inservice Inspection Program)
• ML021610508  + (Request for Relief No. 12 for the Unit 2 3rd 10-Year Interval Inservice Inspection Program)
• ML083260099  + (Request for Relief No. 13R-03 for the Third 10-Year Inservice Inspection Interval Regarding the System Pressure Test)
• ML083260136  + (Request for Relief No. 13R-04 for the Third 10-Year Inservice Inspection Interval Regarding System Pressure Testing of Class 1 Systems (Tac MD8744))
• L-PI-03-118, Request for Relief No. 14, Revision 1 for the Third 10-Year Interval Inservice Inspection Program  + (Request for Relief No. 14, Revision 1 for the Third 10-Year Interval Inservice Inspection Program)
• L-PI-04-005, Request for Relief No. 16, Revision 0 for the Third 10-Year Interval Inservice Inspection Program  + (Request for Relief No. 16, Revision 0 for the Third 10-Year Interval Inservice Inspection Program)
• ML110200700  + (Request for Relief No. 17 Regarding Examination of Reactor Pressure Vessel Shell Circumferential Welds)
• L-PI-05-012, Request for Relief No. 17, Revision 0, for the Plant 3rd 10-year Interval Inservice Inspection Program  + (Request for Relief No. 17, Revision 0, for the Plant 3rd 10-year Interval Inservice Inspection Program)
• ML18016A178  + (Request for Relief No. 17-CN-001, Regarding Category B-J Pressure Retaining Welds for the Third 10-Year Inservice Testing Interval (CAC Nos. MF9807 and MF9808; EPID L-2017-LLA-0032))
• L-PI-04-039, Request for Relief No. 19, Revision 0, for Units 1 & 2 3rd Ten Year Inservice Inspection Interval  + (Request for Relief No. 19, Revision 0, for Units 1 & 2 3rd Ten Year Inservice Inspection Interval)
• L-PI-05-083, Request for Relief No. 2-RR-4-6, for the Unit 2 4th 10-Year Interval Inservice Inspection Program  + (Request for Relief No. 2-RR-4-6, for the Unit 2 4th 10-Year Interval Inservice Inspection Program)
• L-PI-04-069, Request for Relief No. 20 (Addendum 1), Revision 1 Prairie Island Nuclear Generating Plant Units 1 and 2 3rd Ten Year Inservice Inspection Interval  + (Request for Relief No. 20 (Addendum 1), Revision 1 Prairie Island Nuclear Generating Plant Units 1 and 2 3rd Ten Year Inservice Inspection Interval)
• L-PI-04-044, Request for Relief No. 20, Revision 0, for Units 1 & 2, 3rd Ten Year Inservice Inspection Interval  + (Request for Relief No. 20, Revision 0, for Units 1 & 2, 3rd Ten Year Inservice Inspection Interval)

• ML060450464  + (Request for Relief No. 2006-ON-001)

• ML060870447  + (Request for Relief No. 2006-ON-001, Revision 1)
• ML061210495  + (Request for Relief No. 2006-ON-01, Revision 1)
• L-PI-05-082, Request for Relief No. 21, for the Plant 3rd 10-Year Interval Inservice Inspection Program  + (Request for Relief No. 21, for the Plant 3rd 10-Year Interval Inservice Inspection Program)
• ML073330001  + (Request for Relief No. 2ISI-32-1 Through 2ISI-32-20 for the Second 10-Year Inservice Inspection Program Interval and Withdrawal of 2ISI-32-21)
• ML031070077  + (Request for Relief No. 3-29(S) Regarding Visual Examination of Snubbers. Terminated Review of Request for Relief No. 29)
• ML060520051  + (Request for Relief No. 37. Revision 1, Regarding the Duties of the Authorized Nuclear Inservice Inspector)
• ML070590175  + (Request for Relief No. 3ISI-07 for the Third 10-year Inservice Inspection Interval Program)
• ML083220206  + (Request for Relief No. 3ISI-08 for the Third 10-Year Inservice Inspection Program Interval)
• ML090790588  + (Request for Relief No. 3ISI-09 for the Third 10-Year Inservice Inspection Program Interval)
• ML092870544  + (Request for Relief No. 43 for the Second 10-Year Inservice Inspection Program Interval)
• ML020590181  + (Request for Relief No. 5 Related to Snubber Testing (Tac Nos. MB3763, MB3764 and MB3765))
• ML041840169  + (Request for Relief No. 55 from ASME Code Repair Requirements for ASME Code Class 3 Service Water System Piping)
• ML023290578  + (Request for Relief No. 9 for the Unit 2 Third 10-Year Interval Inservice Inspection Program)
• ML13179A110  + (Request for Relief No. ANO1-ISI-021, from ASME Volumetric Requirements for Full Penetration Welded Nozzles in Vessels - Inspection Program B; Fourth 10-Year ISI Interval)
• ML080430662  + (Request for Relief No. B-4 from Certain Requirements of ASME Code, Section XI for Implementation of the EPRI-PDI Supplement 11 Program and Application of Weld Overlays)
• ML070650651  + (Request for Relief No. C-1 for Second 10-Year Inservice Inspection Interval Class 2 Excess Letdown Heat Exchanger Head-to-Flange Weld)
• ML063520318  + (Request for Relief No. ISI-35 for Second 10-year Inservice Inspection Interval)
• ML021000690  + (Request for Relief No. PR-12 Associated with the Third 10 - Year Interval Inservice Testing Program for Pumps and Valves at Calvert Cliffs Nuclear Power Plant, Units 1 and 2)
• ML102220449  + (Request for Relief No. RI-04 for the Fourth 10-Year Inservice Inspection Interval Regarding Inspection of Reactor Vessel Nozzle-to-Vessel Shell Welds)
• ML100970687  + (Request for Relief No. RI-06 for the Fourth 10-Year Inservice Inspection Interval Regarding Inspection of Reactor Vessel Longitudinal Welds)
• ML080230288  + (Request for Relief No. RI-29, Revision 1, for Fourth 10-Year Inservice Inspection Volumetric Examination of Reactor Pressure Vessel Circumferential Shell Welds)
• ML17353A682  + (Request for Relief No. RR 01, Regarding Extension of Permanent Relief from Ultrasonic Examination of Reactor Pressure Vessel Circumferential Shell Welds for the Renewed Operating License Term)
• ML021990299  + (Request for Relief No. RR-29 from the American Society of Mechanical Engineers Boiler and Pressure Vessel Code Requirements)
• ML070360418  + (Request for Relief No. RR-38 Regarding Pressure Testing of Drain, Vent, Test, and Fill Lines within the Reactor Coolant Pressure Boundary)
• ML031070429  + (Request for Relief No. RR-48 Concerning Inservice Inspection Requirements for the Class 1 Reactor Vessel Nozzles)