Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• ML030280679  + (Relief Request 01-006 Rev. 1, Request for Additional Information)
• ML021210076  + (Relief Request 01-007)
• ML020280368  + (Relief Request 01-009 Addressing Cases of Limited Examination Coverage from Inspections Performed During End of Fuel Cycle 13 for Unit 2)
• ML042030006  + (Relief Request 03-004, Second 10-year Inservice Inspection Interval Extension for Reactor Vessel Examination)
• ML040480394  + (Relief Request 03-GO-011 - Alternative to ASME Section XI (TAC Nos. MB9920, MB9921, MB9923, and MB9926)
• ML041040800  + (Relief Request 04-MN-001, Relief Request from Immediate Containment Spray Piping ASME Code Repair)
• ML083190626  + (Relief Request 04-ON-009, Rev. 1, Regarding Limited Weld Examination Coverage)
• ML060930248  + (Relief Request 05-ON-003)
• ML063490399  + (Relief Request 06-GO-001)
• ML063110575  + (Relief Request 06-GO-001 Commitments)
• ML062620261  + (Relief Request 06-GO-001 Request for Additional Information)
• ML063610218  + (Relief Request 06-GO-001 Response to Request for Additional Information Regarding Stress Analysis)
• ML063410220  + (Relief Request 06-ON-004)
• ML063050534  + (Relief Request 06-ON-004 Request for Additional Information Seeking NRC Approval to Use Alternatives to ASME Code Section XI ISI Requirements for the Plants)
• ML062620234  + (Relief Request 06-ON-004 Request for Additional Information)
• ML082600006  + (Relief Request 07-001-II, Revision 0, Risk Informed Inservice Inspection Program for the Fourth 10-Year Interval)
• 3F0808-03, Relief Request 07-001-SS, Revision 1, Alternate Examination Criteria for the Reactor Vessel Support Skirt to Perform Limited VT-3 Visual Examination on Three Areas 120 Degrees Apart on the Inside Surface  + (Relief Request 07-001-SS, Revision 1, Alternate Examination Criteria for the Reactor Vessel Support Skirt to Perform Limited VT-3 Visual Examination on Three Areas 120 Degrees Apart on the Inside Surface)
• ML073030132  + (Relief Request 07-003-RR Regarding Structural Weld Overlays)
• 3F0507-03, Relief Request 07-003-RR, Revision 0  + (Relief Request 07-003-RR, Revision 0)
• 3F1107-02, Relief Request 07-003-RR, Revision 1, Completion of Regulatory Commitment  + (Relief Request 07-003-RR, Revision 1, Completion of Regulatory Commitment)
• 3F0907-05, Relief Request 07-003-RR, Revision 1, and Response to Request for Additional Information  + (Relief Request 07-003-RR, Revision 1, and Response to Request for Additional Information)
• ML071210249  + (Relief Request 07-GO-0001. Proposed Alternative Approach Supports Application of Full Structural Weld Overlays on Various Pressurizer Nozzle-to-Safe End Welds)
• ML070310367  + (Relief Request 07-GO-001)
• ML073460046  + (Relief Request 07-MN-001, Response to Request for Additional Information Relief Request from Immediate ASME Code Flaw Repair of Charging Pump Discharge Line Valve 1NV-240)
• ML073460903  + (Relief Request 07-ON-004)

• ML090260788  + (Relief Request 08-001-MX)

• ML091970477  + (Relief Request 08-001-MX, Revision 0, Regarding Initial Examination of Tendons Affected by Post-Tensioning System Repair/Replacement Activities)
• 3F0308-04, Relief Request 08-001-RR, Revision 1  + (Relief Request 08-001-RR, Revision 1)
• 3F0508-12, Relief Request 08-001-RR, Revision 1, 60-Day Response, Summary of Analysis Calculations  + (Relief Request 08-001-RR, Revision 1, 60-Day Response, Summary of Analysis Calculations)
• ML081260471  + (Relief Request 08-001-RR, Revision 1, to Install a Weld Overlay on the Dissimilar Metal Weld in the Decay Heat Drop Line)
• 3F0308-07, Relief Request 08-001-RR, Revision 1: Reports of Weld Overlay Examination Results  + (Relief Request 08-001-RR, Revision 1: Reports of Weld Overlay Examination Results)
• ML083360358  + (Relief Request 08-002-RR Regarding Dissimilar Weld Overlay Repair)
• ML083500388  + (Relief Request 08-002-RR, Revision)
• 3F1008-03, Relief Request 08-002-RR, Revision 0  + (Relief Request 08-002-RR, Revision 0)
• 3F0110-05, Relief Request 08-002-RR, Revision 0, Completion of Regulatory Commitment  + (Relief Request 08-002-RR, Revision 0, Completion of Regulatory Commitment)
• 3F1209-02, Relief Request 08-002-RR, Revision 0, Completion of Regulatory Commitments  + (Relief Request 08-002-RR, Revision 0, Completion of Regulatory Commitments)
• ML091910378  + (Relief Request 08-002-RR, Revision 0, Use of Weld Overlay as an Alternative Repair Technique)
• ML081490471  + (Relief Request 08-MN-001)
• ML082950485  + (Relief Request 08-MN-002, Response to Request for Additional Information)
• ML082740304  + (Relief Request 08-MN-002, Supporting Application of Structural Weld Overlay to Reactor Vessel Hot Leg Nozzle-To-Safe End Weld(S))
• ML082600580  + (Relief Request 08-MN-003 for Alternate Depth Sizing Criteria)
• ML082890199  + (Relief Request 08-MN-005)
• ML090620158  + (Relief Request 08-ON-001, Regarding Limited Weld Examination Coverage)
• ML102320010  + (Relief Request 08-ON-002 for Limited Weld Examinations)
• ML100360849  + (Relief Request 09-001-IT, Revision 0, Proposed Alternative for Comprehensive Pump Test)
• 3F1109-07, Relief Request 09-004-II, Revision 0  + (Relief Request 09-004-II, Revision 0)
• ML101050179  + (Relief Request 09-004-II, Revision 0 for the Inservice Inspection Program)
• ML100471112  + (Relief Request 09-GO-001, Regarding Alternatives from Pressure Test Requirements for Buried Piping)
• ML100470359  + (Relief Request 09-GO-001, Regarding Alternatives from Pressure Test Requirements for Buried Piping)
• ML100470045  + (Relief Request 09-GO-001, Regarding Alternatives from Pressure Test Requirements for Buried Piping)
• ML093350526  + (Relief Request 09-MN-003 Request for Additional Information)