ML21137A196
ML21137A196 | |
Person / Time | |
---|---|
Site: | Davis Besse |
Issue date: | 02/18/2021 |
From: | Gregory Roach NRC/RGN-III/DRS/OLB |
To: | FirstEnergy Nuclear Operating Co |
Roach G | |
Shared Package | |
ML20136A251 | List: |
References | |
L-20-236 | |
Download: ML21137A196 (2) | |
Text
ES-301 Transient and Event Checklist Form ES-301-5 Facility Davis-Besse Nuclear Power Station Date of Exam 2/1/2021 to 2/5/2021 Operating Test No DB1LOT21 A E Scenarios P V 1 2 3-SPARE M P E T I L N CREW POSITION CREW POSITION CREW POSITION CREW POSITION O N T
I T I C T A M A Y S A B S A B S A B S A B L U N P R T O R T O R T O R T O M(*)
T E O C P O C P O C P O C P R I U RX 1 1 0 2 2 5 5 4 4 M
NOR 1 1 1 A 1 1 1 1 S I/C 1 4 4 2 T 3 2 2 2 2 1 4 4 3 3 5 E 5 7 5 4 4 3 5 6
2 R 7 7 6 7 7 7 7
MAJ 2 2 1 6 6 6 6 6 6 5 5 5 TS 2 0 2 2 3 1 4
5 3 5
RX 2 1 1 0 2 5 SRO U-1 NOR 1 1 1 1 1
I/C 3 7 4 4 2 2
4 4
5 7
7 MAJ 2 2 2 1 6 6 TS 3 2 0 2 2 5
RX 2 1 1 0 2 5 SRO U-2 NOR 1 1 1 1 1
I/C 2 6 4 4 2 4 3 7 4 7
MAJ 2 2 2 1 6 6 TS 2 3 0 2 2 4
5 NUREG-1021, Revision 11 Page 1 of 2 Rev. 1
ES-301 Transient and Event Checklist Form ES-301-5 Facility Davis-Besse Nuclear Power Station Date of Exam 2/1/2021 to 2/5/2021 Operating Test No DB1LOT21 A E Scenarios P V 1 2 SPARE M P E T I L N CREW POSITION CREW POSITION CREW POSITION CREW POSITION O N T
I T I C T A M A Y S A B S A B S A B S A B L U N P R T O R T O R T O R T O M(*)
T E O C P O C P O C P O C P R I U RX 2 1 1 0 2 5 SRO U-3 NOR 1 1 1 1 1
I/C 3 7 4 4 2 2
4 4
5 7
7 MAJ 2 2 2 1 6 6 TS 3 2 0 2 2 5
RX 2 1 1 0 2 5 SRO U-4 NOR 1 1 1 1 1
I/C 2 6 4 4 2 4 3 7 4 7
MAJ 2 2 2 1 6 6 TS 2 3 0 2 2 4
5 Instructions:
- 1. Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2. Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.
- 3. Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4. For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
NUREG-1021, Revision 11 Page 2 of 2 Rev. 1