ML21040A471

Revised Form ES-301-5 (Regional Audit Corrective Action)(Folder 1)

ML21040A471
Person / Time
Site:	Limerick
Issue date:	02/09/2021
From:	Brian Fuller Operations Branch I
To:	Byers T Exelon Nuclear Generation Corp
Shared Package
ML18116A036	List: IR 05000352/2018301 ML18116A054 ML19050A365 ML19050A374 ML19065A066 ML19065A077 ML19065A224 ML19065A230 ML19066A204 ML19066A214 ML19092A047 ML20115E461 ML21040A471 ML21040A483 ML21050A181 ML21050A227 ML21062A195
References
CAC 000500
Download: ML21040A471 (1)

Text

ES-301 Transient and Event Checklist Form ES-301-5 Facility: LIMERICK Date of Exam: 11/26/2018 Operating Test No.: 001 A

P P

L I

C A

N T

E V

E N

T T

Y P

E Scenarios (1) 3005E (2) 4058E (3) 6221E (4) 2016 S T

O T

A L

M I

N I

M U

M(*)

CREW POSITION CREW POSITION CREW POSITION CREW POSITION S

R O

A T

C B

O P

S R

O A

T C

B O

P S

R O

A T

C B

O P

S R

O A

T C

B O

P R

I U

SRO-U (1)

RX 0

1 1 0 NOR 0*

1 1 1 I/C 1,2,3 4,5,6 8,9 8

4 4 2 MAJ 7

1 2

2 1 TS 1,2 2

0 2 2 SRO-U (2)

RX 1

1 1

1 0 NOR 0*

1 1 1 I/C 2,3,4 5,7,8 6

4 4 2 MAJ 6

1 2

2 1 TS 2,4 2

0 2 2 SRO-I (1)

RX 3

1 1

1 0 NOR 0*

1 1 1 I/C 1,2,3 4,5,6 8,9 3,4,5, 7,8 5,6,8 16 4

4 2 MAJ 7

6 7

3 2

2 1 TS 1,2 2

0 2 2 SRO-I (2)

RX 1

3 2

1 1 0 NOR 1

1 1

1 1 I/C 1,2, 3,6 2,5 2,4,5 6,8,9 12 4

4 2 MAJ 7

6 7

3 2

2 1 TS 2,4 2

0 2 2

ES-301 Transient and Event Checklist Form ES-301-5 Instructions:

1.

Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2.

Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.

3.

Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.

4.

For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.

ES-301 Transient and Event Checklist Form ES-301-5 Facility: LIMERICK Date of Exam: 11/26/2018 Operating Test No.: 001 A

P P

L I

C A

N T

E V

E N

T T

Y P

E Scenarios (1) 3005E (2) 4058E (3) 6221E (4) 2016 S T

O T

A L

M I

N I

M U

M(*)

CREW POSITION CREW POSITION CREW POSITION CREW POSITION S

R O

A T

C B

O P

S R

O A

T C

B O

P S

R O

A T

C B

O P

S R

O A

T C

B O

P R

I U

SRO-I (3)

RX 1

1 1

1 0 NOR 0*

1 1 1 I/C 3,4,5 2,3,4 5,7,8 9

4 4 2 MAJ 7

6 2

2 2 1 TS 2,4 2

0 2 2 RO-(1)

RX 1

1 1

1 0 NOR 0*

1 1 1 I/C 1,2, 3,6, 8,9 2,5 8

4 4 2 MAJ 7

6 2

2 2 1 TS 0

0 2 2 RO-(2)

RX 0*

1 1 0 NOR 1

1 1

1 1 I/C 3,4,5 3,4,5, 7,8 2,4,9 11 4

4 2 MAJ 7

6 7

3 2

2 1 TS 0

0 2 2 Instructions:

1.

Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs (SRO-I) must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an SRO-I additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.

2.

Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional I/C malfunctions on a one-for-one basis.

3.

Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.

4.

For new reactor facility licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.