ML20214W921
| ML20214W921 | |
| Person / Time | |
|---|---|
| Site: | Palisades  |
| Issue date: | 05/28/1986 |
| From: | Fobes R CONSUMERS ENERGY CO. (FORMERLY CONSUMERS POWER CO.) |
| To: | Morley F MICHIGAN, STATE OF |
| Shared Package | |
| ML20214W851 | List: |
| References | |
| NUDOCS 8612100462 | |
| Download: ML20214W921 (2) | |
Text
,
e
<s Consumets
! Power Company 1
(h D f
General Offices: 212 West Michigen Avenue, Jacteon MI 49201 * (517) 788 466o J
May 28, 1986 Mr Fred Morley District Supervisor Michigan Department of Natural Resources I
Plainwell District Office Building L_
621 North Kent Street PO Box 355 Plainwell, MI 49080 FILE NO: P10.2.1 UFI 950/72*40*05/3 Years INCIDENT NO: PAL-86-05-NC124 This is in regard to NPDES Permit No MI 0001457 for the Company's Palisades i
Plant. In accordance with Part II, A4, the attached " NPDES Notification,"
Incident No PAL-86-05-NC124 is submitted as a report of an apparent difference from the daily maximum effluent limitations for this facility.
If you have any questions regarding the attached report, please contact this
- office, bJ I
R L Fobes Senior Environmental Advisor CC USEPA, Enforcement Division, Region V BCC KFBieszke, T-242A TCBordine, P-24-608 SFPierce, Palisades JRSchepers, Palisades ATUdrys, M-1023 8612100462 861201 PDR ADOCK 05000255 PDR S
OC0586-0045A-EN01
(
File No P10.2.1 Incident No: PAL-86-05-NC124 NPDES NOTIFICATION Apparent Difference From Daily Maximum Limitation Plant: Palisades Permit No: MI 0001457 Outfall
Description:
Turbine Sump Oil Outfall Code No: 800218 Separator (001/00F)
Parameter: Oil and Grease Parameter Code No: 00556 1.
Date of Incident: May 19, 1986 (1000 Hours) 2.
Identification of specific effluent limitation or monitoring requirement affected:
Exceeded daily maximum limit 20 mg/L oil and grease 3.
Description of Incident:
A sample of the turbine sump oil separator tank (T-41) on 5/19/86 (1000 hours0.0116 days <br />0.278 hours <br />0.00165 weeks <br />3.805e-4 months <br />) was reported on 5/22/86 to be 33.0 mg/L.
4.
Apparent Cause:
Oil / water separator apparently did not adequately remove influent oil to the system.
5.
If not immediately corrected, the anticipated time the condition is expected to continue:
N/A 6.
Corrective Action - The following corrective action was taken or will be taken to reduce, eliminate and prevent recurrence:
The oil / water separator M-18 was cleaned by A&B Industrial Co. on 5/24/86.
Accumulated oil and grease were removed from the separator components to improve its efficiency.
7.
Additional Comments:
A visual check of the mixing basin discharge showed no visible oil in the discharge or lake.
\\ en [
8.
Signed:
-y' Ronald L Fobes RP0586-0004A-EN01