ML20128L017
| ML20128L017 | |
| Person / Time | |
|---|---|
| Site: | Comanche Peak  |
| Issue date: | 07/19/1985 |
| From: | Counsil W TEXAS UTILITIES ELECTRIC CO. (TU ELECTRIC) |
| To: | Noonan V NRC - COMANCHE PEAK PROJECT (TECHNICAL REVIEW TEAM) |
| References | |
| TXX-4512, NUDOCS 8507240272 | |
| Download: ML20128L017 (7) | |
Text
-..
q Log # TXX-4512 File # 10010 TEXAS UTILITIES GENERATING COMPANY MMYWAY TelW Eli
- 44HD NOH Til OLIVE hTH EET, L.fi, M1
- DALLAM, TEF AM 73201
" ' I0' I900 L'22"&?2?."l,%
Director of Nuclear Reactor Regulation Attention: Mr. Vincent S. Noonan, Director Comanche Peak Project Division of Licensing U. S. Nuclear Regulatory Commission Washington, D.C.
20555
SUBJECT:
COMANCHE PEAK STEAM ELECTRIC STATION (CPSES)
DOCKET NOS. 50-445 AND 50-446 FSAR AMENDMENT 55 DESCRIPTION
Dear Mr. Noonan:
Attached is a table providing the description of Amendment 55, dated July 19, 1985 to the CPSES FSAR.
Sincerely kSVlA W. G. Counsil DRW/grr Attachment 8507240272 850719
{DR ADOCK 05000445 PDR 0$h a mvuusox or rnw run.orsen ru.rcruuc couraxv 4e
CPSES/FSAR AMENDMENT 55 DESCRIPTION Section Description of Change 1A(N)
Editorial correction.
Update to R.G. 1.84 and R.G. 1.85 discussion to describe how code cases are used and documented.
lA(B)
Revision to restore the original commitment to ANSI N18.7-1976 for temporary changes to procedures.
Revision to the classification of coatings inside containment.
Update to R.G. 1.84 and R.G. 1.85 discussion to describe how code cases are used and documented.
Update to response to 312.27 and system description of volumetric leak rates for the control room.
3.1 Revision to include a statement on documentation of code cases.
3.3 Update to tornado venting and description.
T3.3-1 3.7B Editorial correction.
3.8 Addition of " Visual Weld Acceptance and Criteria".
3.8A T3.9N-10 Update to NSSS Active Valve List.
T3.9N-14 Update to reflect latest revision thru of the stress report for RCS T3.9N-19 equipment supports.
T3.9B-8 Update to B0P Active Valve List.
and T3.9B-10 3.11B Update to the IEEE 450 reference to the 1980 version. -
CPSES/FSAR Section Description of Change 4.3 Correction to identify reactivity T4.3-3A parameters in the FSAR as typical and rather than design values.
T4.3-3B 5.2 Clarification of the designation of the austenitic stainless steel weld metal analysis.
Update to the inservice inspection description to reference q later edition of the Section XI' code.
5.4 Revision to the steam generator and tube inspection description to be T5.4-18 consistent with technical specifications.
6.lB Revision to the classification of and coatings inside containment.
T6.18-3 6.2 Revision to the classification of coatings inside containment.
Correction of reference from ANSI N45.2 to N45.4.
Update to description of containment integrated leakage rate test to reflect previous commitments.
T6.2.4-1 Update to tables for containment T6.2.4-3 isolation valves.
and T6.2.4-5 T6.2.4-2 Update note 3 to indicate pressure test performed at pressure "P "-
a T6.2.5-2 Update to Electric Hydrogen Recombiner typical parameters.
6.4 Delete reference to pressure measurement of outside airflow through the emergency pressurization unit.
6.4 Update to response to 312.27 and and system description of volumetric T6.4-4 leak rates for the control room. -
CPSES/FSAR Section Description of Change 6.6 Update to the edition of the ASME code used for Inservice Inspection.
7.2 Commitment to submit N-16 Transit Time Flow Meter performance data.
Clarification of periodic testing performed on NIS.
Revised the reference for setpoints to the Technical Specifications and the I&C Equipment List.
T7.3-4 Update to the table of equipment T7.3-5 actuated by safety signals.
and T7.3-6 7.4 Update to Alternate and Safe T7.4-1 Shutdown description to reflect as T7.4-2 built design.
and T7.4-3 T8.3-1A Update to correct the rating for T8.3-1B the Control Room Evergency and Pressurization Heater.
T8.3-2 T9.2-9 Update to reflect water chemistry requirements on Demineralized Water.
9.3 Delete reference to SG Blowdown and Samples pH monitors and add T9.3-4 reference to specific conductivity monitors.
10.2 Update to make ISI for the Turbine Generator consistent with the technical specifications.
10.3 Update to the edition of the ASME Code used for Inservice Inspection.
T10.3-10 Changes to SG water chemistry to concur with EPRI SG Owners Group recommendations for PWR's.
10.4 Delete reference to turbine-driven
(
auxiliary feedwater pump low suction and low lube oil pressure trips. -
~
CPSES/FSAR Section Description of Change 10.4 Update to reflect water chemistry T10.4-1 requirements on SG Blowdown, and Makeup Water, and Turbine Plant T10.4-15 Cooling Water lystems.
11.3 Update to alarm setpoint for Catalytic Hydrogen Recombiner to reflect as-built conditions.
11.4 Update to description of containers used for shipment and disposal of radioactive wastes.
12.1 Editorial corrections.
12.5 Update to reflect that the TLD readers have been relocated from the OSC to the personnel dosimetry processing facility.
Update to allow the use of General Access Permits in certain High Radiation Areas.
13.1 Update to provide a description of Radwaste Transportation Coordinator.
13.1 Update to reflect TUGC0 and organizational changes.
F13.1-2 13.2 Update to general station training.
Update to maintenance training due to personnel changes.
1 Update to operation support training due to personnel changes.
13.4 Update to the descriptions of 50RC and ORC to reflect organizational changes and to match the technical specifications.
13.5 Update of administrative procedures to reflect present organization and method for handling temporary procedure changes..
N t
CPSES/FSAR Section
[escription of Change Update to personnel responsible for preparing and maintaining Emergency Preparedness Procedures.
17.1 Update to QA section to reflect new F17.1-2 organization and clarification of F17.1-3 equipment calibration and code case F17.1-5 descriptions, and F17.1-6 17.2 Update to clarify responsibility for approval of procedures and instructions.
Editorial correction.
Clarification of the description of QA reviews of safety related plant procedures.
Update to reflect current QA,
organization.
Addition to insert a paragraph inadvertently deleted in a previous amendment.
T17A-1 Clarification to several items on list of Quality Assured Structures, Systems and Components.
Update to quality classification of containment purge supply and exhaust, and pressure relief components.
x Revision to the classification of coatings inside containment.
Q&R Index update.
032 Insert response to 032.95 which was inadvertently dropped by Amendment 33.
140 Response to NRR questions (140.1) on main steam line break outside containment.
L
CPSES/FSAR i>
Section Description of Change Update to allow background readings
'233 for the Loose Parts Monitoring System to be taken during startup-
. testing.instead of after fuel load.
281 Revised classification.of coatings inside containment.
Update to response to 312.27 and system description of volumetric leak rates for the control room, e.
i i
e f
I l,
-.