ML19270G934
ML19270G934 | |
Person / Time | |
---|---|
Site: | Davis Besse ![]() |
Issue date: | 06/15/1979 |
From: | Roe L TOLEDO EDISON CO. |
To: | Reid R Office of Nuclear Reactor Regulation |
References | |
515, NUDOCS 7906210218 | |
Download: ML19270G934 (123) | |
Text
-
t.
TOLEDO June 15, 1979 Docket No. 50-346 LOWELL E. ROE v.c. pr.....a License No. NPF-3 ace. o . ...=
(4191 259-5242 Serial No. 515 Director of Nuclear Reactor Regulation Attention: M r. Robert N. Reid, Chief Operating Reactors Branch No. 4 Division of Operating Reactors United States Nuclear Regulatory Commission Washington, D. C. 20555
Dear Mr. Reid:
This letter is to summarize Toledo Edison's response to the Nuclear Regulatory Commission Order addressed to Davis-Besse Nuclear Power Station, Unit 1 (DB-1) dated May 16, 1979. Davis-Besse Unit I has provided several submittals in response to the May 16, 1979 Order as well as in response to the additional items of your letter of May 18, 1979.
In the attachment to this letter, Davis-Besse actions related to the seven items in section IV (1) of the Order are referenced or sunmarized. In addition, your staff has visited the Davis-Besse 1 site to evaluate the implenentation of our commitments and training effort. Ue believe that with this letter Toledo Edison has fulfilled all of its short term design, procedural and training commitments to support operation of the Davis-Besse Nuclear Power Station, Unit 1, without undue risk to the health and safety of the public.
Yours very truly, I
d7nt".Z/Q. --Oe LER:TJM Scw Attachment 2239 110 cc:
Guy Vissing Operating Reactors Branch No. 4 Division of Operating Reactors U. S. Nuclear Regulatory Connission 00 Washington, D. C. 20555 h
\
I 7 9 0 6 210 2 l2 THE TCLEDO EDISON CCVPANY ECtSCN PLAZA 300 MACISON AVENUE TOLECO OH!O 43652
s e June 15,1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 U. S. NRC ORDER DATED May 16, 1979 Item IV (1)(a)
Review all aspects of the safety grade auxiliary feedwater system to further upgrade couponents for added reliability and performance. Present modification will include che addition of dynamic braking on the auxiliary feedpump turbine speed changer and provision of means for control room verification of the auxiliary feedwater flow to the steam generators. This means of verification will be provided for one steam generator prior to startup from the p~ resent maintenance outage and for the other steam generator as soon as vendor-supplied equipment is available (estimated date is June 1, 1979). In addition, the licensees will review and verify the adequacy of the auxiliary feedwater system capacity.
Response
Toledo Edison has provided its review of the overall reliability of the auniliary feedwater system installed at Davis-Besse Nuclear Power Station, Unit 1 (DB-1) with regard to its operating history and associated design improvements in Enclosure 1 to our letter of May 23, 1979 (Serial No. 508). This assessment, combined with past reliability improvements, the safety grade redundant train design and the safety grade control of steam generator level independent of the integrated control system (ICS), shows that the system is fully capable of performing its required function. Toledo Edison recognizes the importance of this system for DB-1 and will continue its review as part of our longer term commitment of April 27,1979 (Serial No. 497) and later documented by the May 16, 1979 Order.
The auxiliary feedwater turbine dynamic braking resistors, as described in Attachment A of our submittal of May 19, 1979 (Serial No. 505) have been installed.
We have also installed the auxiliary feedwater flow indicators on both auxiliary feedwater lines with control room readouts. These two modifications are described in Toledo Edison's letter of May 22, 1979 (Serial No. 507). Enclosed in this transmittal are the testing procedures on both modifications for your review.
With regard to the final portion of this item, Toledo Edison has completed its review of the capacity of the auxiliary feedwater system and verified the adequacy of the DB-1 system to deliver well over the minimum flowrate to a steam generator.
A minimum auxiliary feedwater flowrate of 550 gpm was established for DB-1 from analysis of the loss of feedwater and loss of offsite power transients for general FSAR accident applicability.
2239 111 e .
June 13, 1979 Docket No. 50-346 License Wo. NPF-3 Serial No. 515 Item IV (1)(a) Response (continued)
The Auxiliary feedwater (AFW) flow is established to cne or both steam generators within 40 seconds of an accident when required. The most severe overheating events requiring AFW are loss of main feedwater flow, main feedwater line breaks and loss of offsite power accidents. For these events, the peak reactor coolant system (RCS) pressures and temperatures will cccur at the time the reactor is tripped. After the reactor is tripped, the RCS temperatures and pressures will go down using the steam generators stored inventory as the heat sink. When AFW flow is started, the RCS rapidly cools down due to the cold AFW flow until the desired steam generator (SG) level is obtained and the SG secondary water tempera-ture has heated up to 550 F (saturation temperature for the code safety valve setpoint of 1050 psig). The mininum auxiliary feedwater flowrate prevents pressurizer fill and saturation conditions in the core and hot legs by limiting RCS overheating.
For auxiliary feedwater flow requirements under small break conditions, Toledo Edison's submittal of May 23, 1979 (Serial No. 508) discussed the model utilization of auxiliary feedwater flow in the small break analysis. This led to your staff's concern that r.he apparent required flowrate capacity was in excess of minimum available for the 700 to 770 second time frane. Figure 1 attached represents the sensitivity of steam generator level to AFW flow capacity and illustrates that, although steam generator level recovery is affected for varying flowrates, only the time to level stabilization is changed. At no time is the heat removal capa-bility of the steam generator impaired.
Figure 1 illustrates a two steam generator feed example of 275 gpm auxiliary feed-water flow per generator, when required, to recover level. Asymetric cooling via one steam generator results in some alteration of system parameters. These are illustrated in section 6.2.4 of Volume I of B&W's report of " Evaluation of Transient Behavior and Small Reactor Coolant System Breaks in the 177 Fuel Assembly Plant" (dated May 7,1979) as not significant with respect to loss of heat removal capability of the steam generator.
2239 112 f .
. FIGURE 1
~~ ~
i LIQUID LEVEL OF STEAM
/ GENERATOR SEC0!OARY SIDE
/ . IN BROKEti LOOP VS. TIME -
RAISED LOOP SMALL SPIAK
- 18. -- ,
(
s i 16. - . .
j .
b -
t % -
1 ~
0
)
.J -
J Id 900 GPM AFW
. i,,- - _ _ _ _ _ _ _
300 c,. p u a v u.) b j # - _ _ __ n g GPM R " d-
'4.
i o.
3
- - ~)
0
)3 -
in -
3 J ;
1 i 3
1 .
2239.113 l s !
- t. i m -
Y i
\ !
10 #
[)9 j
t
. \ 1
\i
\l 2 8. - .
V 14 ,
y -
,j . .
- - g' O_ 5,000 c c,co o ( s.o 20,o o 25,00 30,0o di TIM G K 10 d
W 5 t June 15,1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 Item IV (1)(b)
Revise operating procedures as necessary to eliminate the option of using the Integrated Control System as a backup means for controlling the auxiliary feed-water system.
Response
The Davis-Besse Nuclear Power Station, Unit 1 (DB-1) design incorporates two safety grade level control systems, one manual and one " Auto-essential" (fully automatic). The facility operates with the " Auto-essential" mode selected, so that whenever an event requires auxiliary feedwater (AFW), the initial response is automatic. A third level control system available by the original design is the integrated control system (ICS). Toledo Edison has removed this mode of operation administratively by prohibiting the use of ICS level control for auxiliary feedwater. Additionally, mechanical stops have been installed on the AFW level control mode selector switches in the control room, allowing only the use of " Auto-essential" and manual modes of operation.
2 9 llk s .
June 15, 1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 Item IV (1)(c)
Implement a hard-wired control-grade reactor trip that would be actuated on loss of main feedwater and/or turbine trip.
Response
The design and description of the control grade interim reactor trip system for Davis-Besse Nuclear Power Station, Unit 1 (DB-1) was supplied in our letter of May 11, 1979 (Serial No. 501). The installation of this system has been completed. A copy of the appropriate test procedure is also enclosed. The
. " stem incorporates reactor trips on both turbine trip and loss of all main feedwater flow. To indicate the comparative effectiveness of the reactor trip upon turbine trip, the DB-1 design previously provided for automatic runback upon ICS power-demand mismatch to preclude any reactor trip resulting in opera-tion on the turbine bypass valves and main steam code safety valves. The new reactor trip system provides a direct reactor trip upon turbine trip which circumvents any runback attempt.
The interim reactor trip for loss of feedwater is generated by reverse dif fer-ential pressure across the main feedwater check valves, indicating loss of feedwater flow to both steam generators. The DB-1 design insulates the main feedwater pumps (MFP) from upstream condensate and feedwater system pert.urbations by the use of stored inventory in the full flow deaerator storage tanks. As noted in Table 4 of NU1EG-0560, " Staff Report on the Generic Assessment of Feedwater Transients in Pressurized Water Reactors Designed by the Babcock &
Wilcox Company", there are no common MFP trips utilized or required. The loss of flow to both steam generators from any cause will be sensed by the interim system and provide a reactor trip signal within 1 second.
This interim system provides reactor trip protection not available previously in the incipient stages of transients related to turbine trip and loss of main feedwater flow.
The cabinet housing the low power turbine trip bypass switch will be locked with the station shift foreman retaining the key in his key locker.
2239 115 June 15, 1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 Item IV (1)(d)
Complete analyses for potential small breaks and develop and implement operating instructions to define operator action.
Response
Analyses for potential small breaks have been provided generically by B&W in their May 7, 1979 report, " Evaluation of Transient Behavior and Small Reactor Coolant System Breaks in the 177 Fuel Assembly Plants, Volumes I & II". Addition-ally, to provide more detailed operational guidelines, a Volume III of this report was developed to relate directly to the Davis-Besse Nuclear Power Station, Unit 1, configurations and design details. Volume III was submitted on May 22, 1979 (Serial No. 506). Procedures developed from these analyses were submitted for your review on May 23, 1979 (Serial No. 509) .
2239 116
. r June 15,1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 Item IV (1)(e)
All licensed reactor operators and senior reactor operators will have completed the Three Mile Island Unit No. 2 simulator training at B&W.
Response
All licensed reactor operators and senior reactor operators stationed at Davis-Besse Nuclear Power Station, Unit 1 have completed TMI-2 event simulator training.
Additionally, Toledo Edicon conducted extensive post-TMI-2 operator training previously described in Attachment A of our May 26,1979 (Serial No. 512) letter. The results of that training has been audited on-site by NRC representatives from both Nuclear Reactor Regulation and Office of Inspection and Enforcement.
Those operators who scored less than 90% on the initial evalcation examination or who were unavailable when it was administered, will be administered a new exam developed, reviewed and approved using the same guidelines as the first exam.
All of these persons must complete this exam with a minimum 90% grade before being permitted to assume license duties in Mode 1.
Prior to this second examination the Davis-Besse Training Staff will be responsi-ble for administering additional training. For those operators who were un-available for the previous exam the initial training effort as described in our letter of May 26, 1979 (Serial No. 512) would be administered. Those who did not achieve 90% or better on the first exam will be required to complete a shift reading program consisting of plant change and procedure revisions. Additionally, a four-hour review of prior training will be required followed by on-shif t operator oral examinations conducted on emergency procedures.
Training shall be provided for those procedures revised to include additional guidance as a result of NRC review by utilizing on-shift reviews of procedures and oral walk-throughs.
2239 117 June 15, 1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 Item IV (1)(f)
Submit a re-evaluation of the TEco analysis of the need for automatic or admin-istrative control of steam generator level setpoints during auxiliary feedwater system operation previously submitted by TECo letter dated December 22, 1978, in light of the Three Mile Island No. 2 incident.
Response
Toledo Edison's re-evaluation of the need and desirability for a steam generator dual level setpoint was provided by our letter of May 19, 1979 (Serial No. 505).
As a result of subsequent discussions with your staff further explanation is provided here to illustrate the adequacy of this control at the Davis-Besse Nuclear Power Station, Unit 1 (DB-1).
Following reactor trip the DB-1 reactor is designed for feedwater inventory level control in its steam generators. If the reactor trip is followed by a Steam and Feedwater Rupture Control System (SFRCS) actuation, a 35-inch level control setpoint is established to provide for adequate decay heat removal without overcooling the RCS. The 35 inch level control setpoint also provides adequate RCS natural circulation if forced coolant flow is lost. This level setpoint is applicable when no incident level 2 (<-1600 psig, small break) actuation of SFAS has occurred.
Auxiliary feedwater (AFW) flow is established to one or both steam generators within 40 seconds when auxiliary feedwater is required and the peak reactor coolant system (RCS) pressures and temperatures will occur prior to 40 seconds at the time the reactor is tripped. The most severe overheating events requiring AFW are loss of main feedwater flow, main feedwater line breaks and loss of offsite power accidents. After the reactor is tripped, the RCS temperatures and pressures will go down using the steam generators as the heat sink. When AFW flow is started, the RCS rapidly cools down due to the cold AFW flow until the desired steam generator (SG) level is obtained and the SG secondary water temperature has heated up to 550 F (saturation temperature for the code safety valve setpoint of 1050 psig) .
The effect of this level control on the RCS following reactor trip is to reduce and maintain RCS temperature with normal or auxiliary feedwater consistent with the saturation pressure of the steam generators. This results in a RCS temperature of about 5500F under steady state conditions. Since level control is adequate to provide decay heat removal capability via the steam generator following reactor trip, all RCS parameters (including system pressures) are maintained within their normal pressure-temperature operating ranges. Therefore, the 35-inch level control has no adverse effect on the DB-1 FSAR accident analyses.
2239 118 June 15, 1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 Item IV (1)(f) Response (continued)
In the event that forced RC flow is lost, the 35-inch level control setpoint is established by auxiliary feedwater addition to the steam generators within 40 seconds following the loss of RC pumps. The effectiveness of the 35-inch control level in promotion and maintenance of adequate natural circulation conditions in the RCS has been demonstrated in tests conducted at DB-1. These tests confirm the flow requirements for natural circulation stated in DB-1 FSAR Table 15.2.5-4 for the loss of forced reactor coolant flow accident evaluation.
Thus, the control of the AFW at 35-inches does not change previous analyses for peak temperature and pressure.
In cases such as small RCS breaks the Davis-Besse 1 AFW control system provides control of the SG level to 35-inches prior to SFAS actuation and control to 120 inches following SFAS actuation. The impact of the dual level control system on small break transients has been examined and was found acceptable.
Small break analyses performed in the Topical Report BAR-10075A, Rev. 1, and the letter report, J. H. Taylor to R. J. Fbttson, dated May 7,1979, cover a break size range of 0.01 f t.2 through 0.5 ft2 For all of these breaks, SFAS actuation occurs prior to the SG level decreasing to 120 inches. Thus, the dual level control will be set to 120 inches prior to AFW delivery and the small break analyses remain valid.
For breaks smaller than 0.01 ft2 , it is possible that the SG level control setpoint will initially be at 35-inches and then will be raised to 120 inches following the actuation of the SFAS. The interim period of control at 35 inches will have no effect on the transient. As demonstrated by the 0.01 ft2 break case, presented in section 6.2.5 of the May 7 report, the reactor coolant system will remain solid with a pressurizer bubble until the system depressurizes to 1400 psia causing flashing in the primary system. Since this is lower than the SFAS trip signal (41650 psig), the dual level control will be set to 120 inches prior to saturation in the primary system. Prior to actuation of SFAS, the SG level will be controlled to 35-inches and will maintain natural circulation. As documented in Appendix I of the reference, natural circulation tests performed at Dsvis-Besse 1 demonstrate the ability of the 35-inch level to maintain natural circulation and decay heat removal via the steam generators. Thus, the dual level control system will not adversely affect the capability of the ECCS system to control very small breaks.
2239 119 June 15, 1979 Docket No. 50-346 License No. NPF-3 Serial No. 515 Item IV (1)(g)
Submit a review of the previous TECo evaluation of the September 24, 1977 event involving equipment problems and depressurization of the primary system at Davis-Besse 1 in light of the Three Mile Island Unit No. 2 incident.
_ Response A review of the September 24, 1977 event at the Davis-Besse Nuclear Power Station, Unit I was supplied in Toledo Edison's letter of May 18, 1979 (Serial No. 503) .
22 e=
, . . OlS RIB UTION
. Original, Responsible Section Head Action
_ File Copy, Master File COPIES TO BE MOQlFIED FOR IMMEDI ATE IMPLEMENTATION DAVIS-BESSE NUCLEAR POWER STATION . UNIT 1
' TEMPORARY MODIFICATION REOUEST ED 6926 SECTION 1 PROCEDURE TITLE AND NUMBER htils h m heduanke v. % stem flod%\q Test
$ 750*?I . o l REASON FOR CHAbGE
% Test. C.hane)c 5 made. tw F C R, 7 7. '2. t l 3nd To fcot f he Me d Flo w a nd c.ator in da11 ed m Fct 7 9- 166
- ^""
A3 pv Arrcc.ked 2239 121 i
IS PROCEDURE REVISION REQUIRED y ,, , , , _,, ,,, _, ,, ,,,_ ,, ,,,,, _,, g g pg g g gg{*
n . - n TeS t t'd-PREPARED BY DATE ,
APPROVED BY / DATE
[
APPROVED 8Y QJ~Wm SUBMITTED BY (Seebon Heed)
DATE DATE s/28h9 RECOMMENDED BY (SRS ChairUan) V DATE 3 b, O. k '
9 b!3\ b QA APPROVED BY (Manager of Quality Assurance) '# DATE DATE rojy/PPROVED BY (Station Superintencent)w Aw w-
< 4 /< h 1
- I OI7l71
This test is to be performed on AFPT (1-1, 1-2) (Circle appropriate AFP).
Before Step 6.1:
- 1. Select Manual on HIS 520B (HIS 521B) .
. Verified
- 2. Hold HIS 520A (HIS 521A) in the lower Position for 25 seconds.
Verified -
- 3. Connect an Oscillose' ope and pulse generator to the AFPT l-1 (1-2) speed changer motor.
Verified
- 4. Identify how the Oscilloscope and pulse generator is connected to pulse the Speed Changer Motor in both the High Speed Stopsdirection and Low Speed Stop(Lss) direction. Attach this to the test. (N55)
Verified
- 5. Adjust the pulse generator to pulse the speed changer motor for 60 milli-seconds with at least a five (5) second pause between each pulse.
Verified
- 6. Use the Pulse generator to pulse the Speed Changer towards the High Speed stop.
Verified
- 7. Count the number of pulses necessary to rotate the Speed Changer Motor 5 turns.
No. of Pulses Verified
- 8. Continue to rotate the Speed Changer Motor two (2) more turns toward the High Speed Stop to assure the Speed Changer is at HSS. -
Verified
- 9. Use the Pulse generator to pulse the Speed Changer Motor toward the Low Speed Stop.
Verified
- 10. Count the number of pulses necessary to rotate the Speed Changer Motor 5b turns. r No. of Pulses Verified
- 11. Continue to rotate the Speed Changer Motor two (2) more turns toward the Low Speed stop to assure the Speed Changer is at LSS.
Verified 2239 122
, .. 2.-
- 12. Adj ust the Pulse generator to pulse the Speed Changer Motor for 100 milli-seconds with at least a five (5) second pause between each pulse.
Verified
- 13. Repeat steps 6, 7, 8, 9, 10, and 11.
Verified Step 6 Verified step 7 Verified .
No. of Pulses Step 8 Verified Step 9 Verified Step 10 Verified No. of Pulses Step 11 Verified
- 14. Adjust the Pulse generator to Pulse the Speed Changer Motor for 150 milli-seconds with at least a five (5) second pause between each pulse.
~
Verified
- 15. Repeat steps 6, 7, 8, 9, 10, and 11.
Verified Step 6 Verified '
Step 7 Verified No. of Pulses I Step 8 Verified Step 9 Vertfied Step 10 Verified
,- No. of Pulses Step 11 Verified
- 16. Adjust the Pulse generator to pulse the Speed Changer Motor for 200 milli-seconds with at least a five (5) second pause between each pulse.
Verified 2239 123 P
3
- 17. Repeat steps 6, 7, 8, 9, 10, and 11.
Verified S,tep 6 Verified Step 7 Verified No. of Pulses Step 8 Verified :
s .
Step 9 Verified Step 10 Verified No. of Pulses Step 11 Verified
- 18. Using a continuous pulse, record below the time required to go from the low speed stop to the high speed stop and from the high speed stop to the low speed stop.
Low speed to high speed: seconds High speed to low speed: seconds Ver;C de d -
- 19. Disconnect the Dynamic Braking Resistor from the Speed Changer Motor circuit.
Verified
- 20. Identify the wire (s) lif ted to disconnect the Dynamic Braking resistor and attach it to the procedure.
Verified ,
- 21. Adjust the pulse generator to pulse the Speed Changer Motor for 60 milli-seconds with at least a five (5) second pause between each pulse.
-7
~
Verified
- 22. Repeat steps 6, 7, 8, 9, 10,-and 11.
Step 6 Verified Step 7 Verified No. of Pulses Step 8 Verified Step 9 Verified Step 10 Verified No. of Pulses}O / 2f Step 11 Verified t
if
- 23. Adj ust the Pulse generator to pulse the Speed Changer Motor for 100 milli-seconds with at least a five (5) second pause between each pulse.
Verified-
- 24. Repeat steps 6, 7, 8, 9, 10, and 11.
Verified Step 6 Verified
' Step 7 Verified l No. of Pulses Step 8 Verified Step 9 Verified Step 10 Verified No. of Pulses Step 11 Verified 25 . Adjust the Pulse generator to pulse the Speed Changer Motor for 150 milli-seconds with at least a five (5) second pause between each pulse. ,
Verified 16 Repest ste p s 6,7 ,8 ,9 ,10 24 3 - Y* '" Step 6 Verified Step 7 Verified No. of Pulses . Step 8 Verified Step 9 Verified I-Step 10 Verified No. of Pulses 4 Step 11 Verified 27 Adjust the Pulse generator to pulse the Speed Changer Motor for 200 milli-seconds with at least a five (5) second pause between each pulse. Verified - 2239 125 9 a
28 Repeat steps 6, 7, 8, 9, 10, and 11. Verified Step 6 Verified Step 7 Verified No. of Pulses Step 8 Verified . s . Step 9 Verified Step 10 Verified - No. of Pulses Step 11 Verified 29 Using a continuous pulse, record below the time required to go from the low speed stop to the high speed stop and from the high speed stop to the low speed stop. Lov speed to high speed: seconds High speed to low speed: seconds Verified 30 Reconnect the Dynamic Braking Resistor to the Speed Changer Motor circuit. Verified This step must be independently verified. , Independent Verification
- 31. Disconnect the Oscilloscope and Pulse generator. ;
Verified
- 32. Forward th'is completed test to TECo Power Engineering and Bechtel Engineering.
Verified ACCEPTANCE CRITERIA:
- 1. More Pulses are required to turn the Speed Changer Motor 5 ' turns when the dynamic braking resistor is installed las co= pared to the same type of pulse when the resistor is removed.
Verified 2239 126 9
,- 6 Add to Limits and Precautions: .
4.6 Observe the Limits and Precautions of PP 1101,01 for Secondary Side Filling of a Steam Generator. Add to Prerequisites: . 5.7 brain Steam Generator 1-1 (1-2) to 450 inches on the Full Range Level Indi-cation per SP 1106.08, Steam Geners. tor Secondary Side Fill, Drain, and Layup. Verified 5.8 'This test is to be run on AFP (1-1, 1-2) (Circle appropriate p' ump). Change Step 9.1.1 to read: 9.1.1 The startup section of SP 1106.06, Auxiliary Feedwater System, Section 4, has been completed for the AFW System to be tested, except:
- 1. The following breakers listed in step 4.2.3 of SP 1106.06 for the pump being tested should be open
- ca-w d 4% a s s o c i' 4s 4 v a l "'*cl* Sad .
, DISCONNECT MCC BREAKER NAME VLV NO. SWITCH CA3. INITIAL E-11-C BE-llS4 AFFT l-1 Mn Stn Inlet Iso Viv MS-106 CDE-ll-C E-ll-E BE-1146 AFP l-1 Disch to SG l-2 Viv AF-3869 CDE-llB-2 __ _ _
E-12-3 BE-1271 SG l-2 to AFFT l-1 In Stm Viv MS-106A CDE-12-B - F-ll-A 3F-ll24 AFFT l-2 Mn Stm In Iso Viv HS-107 CDF-ll-A F-ll-B BF-ll88 SG l-1 to AFFT 1-2 In Sem Viv MS-107A CD F-il-3 - F-12-A BF-1201 AFP l-2 Disch to SG l-1 AF-3871 CDF-12-A
~ ~
E-12-A BE-1218 SW 1382 SW to AFP 1-1 SW-1382 CDE-12A-1 T-~ F-il-C BF-il77 SW 1383 SW to AFP l-2 SW-1383 CDF-11-C _~
- 2. AF 608 (AF 599) S/G l-1 (1-2) AFW Stop Valve is open. '.
After Step 9.18 (rev. 10) Add:
- 1. Open AF 3870 (AF 3872). Verified -
- 2. Adjus,t HIS 520A (HIS 521A) to fill the Steam Generator at a constant flow rate.
NOTE: AF 360 (AF 388) will not open automatically until 2800 RPM is reached. It may be necessary to open these valves from the Control Room to fill the Steam Generator at a lower pump speed. Verified 2239 127
~ } g.r e.
- 3. Measure the rate of Steam Generator level increase. OsAS ' O c L*el '"
N2 Srop wa4c.h
- kke O (eve { ne, reg Verified
- 4. Record the following parameters:
AFPT Speed SI 815 (SI 816) RPM AFP Discharge Pressure PI 505 (PI 509) PSI SG AFW Flow FI 4521 (FI 4522) GPM w . Verified
- 5. Close AF 3870 (AF 3872). Verified
- 6. Adjust AF 23 and HIS 520A (HIS 521B) until the same RPM and Pressure as Step 4 above is obtained.
Verified
- 7. Record pu=p flow on PDI 2658.
"HO2 Verified
- 8. Close AF 23. Verified
- 9. Proceed to Step 9.19. -
Verified Add Step 9.39: 9.39 Fill the Steam Generator as per the Shift Foreman's discretion. Verified Add to the Acceptance Criteria: [ 10.7 The flow indication seen on FI 4521 (FI 4522) is within 2 25% of the actual flow.
. Verified . 2239 128
( : r.$~
.$; ).#
' 57 .*:71.01 Davis-Eesse Nuclear Pcwer Sta:ica fl E C E l V E D . Unit No. 1 MAY 71979 : Auxiliar/ Teedvater Systen Men:hly Tes: PUulR EHG. l Surveillance Test ST 3071.01 ,
~T AJ F~l %~~ M l- 1 EC N . _ .__
a c s . , __ _i _ - j_
- ~-'- 'WCA ,: nm ..{ - -
nvoi((_- t.AH !
. _{ j_ .;
D M D h w a s i._ . _ . i - $ !, - - -- g(D j ( a c n o _ _. ; _ _. g g. g u, nas i, , _ . . _ Record of Approval and Changes v r.t , L j_ _ .'. - sc; ; I. -- ;
.{' ..__ I mo; i. _ ; _.i ._ __ _{ -
T. Lehnan, R. Clark, L. Sterline, and R. C~nesk: Aso 10 /717 5f -- - ' - Prepared by ~ c u.i Date l
.3 0 t f ! 'L4 . l __.. i --
J KW ' I Subnitted by
- c:1:n Headij w- Ca:e , --
Reco:= ended by /4 L / 8 *' / - S?3 Chairman MW' Oa:e r i c s ', _. q l __ _ . I,- ! QA Approved b -~~ ^2'T I ' ' - -' F.an t.g a - c M uality Assurance TM1 Cafe , i
/ C1 -
Approved by / 5:st::n Superintendent f 'l ^ ^ .Da:e -- i ,
.__I /' TWH
_'J%p [-- l - ---- l c#.wf}{L l c ,M G _ Revision SP3 QA 5:a 2 6C J- -
?
No. Recensendation Date Approved Date 1.;; JMM hu _. { ( f.',.'iy?
/a/'yY. A% >
f ,, > "r2 /hlQ pt ,f z y' 6'::O 7 /1r b, W% _ b. 9* I h!h '
.3 g&V2? o V &,_zo f/ 3/7' L p pg p /2 *i /7 7 j;j; , ,7 . f af 3 f,7 e a N -s '/ e/ ? e . C '. .-
t 't- :- m, ,j,(7
- 3 2 - m/ 3 r+m C.l u i ? :
a /j-) y N $5djf "
.: o 6f.z.1/73 ,p p,4t ,1/5-bie --r :: 4 , "l' / ) ? "hetn q f.?A'M ~ '~
f M-w/" /WA/ us > o.. -
- u. / nn t' p,&. 2239 129 y ///A~r
1 ST 5071.01.6 .
- 1. OBJECTIVE 1.1 The objective of this test is to verify that the auxiliary feed systems are operable in codes 1, 2, and 3 by at least ence per 31 days on a staggered test basis: .
j 1.1.1 Verifying that each steam turbine driven pu=p develops a dif fer- > ential pressure of 2t1070 paid on recirculation flow when the (TS4.7.3.2) secondarv steam supply pressure is greater than 800 psia as meas- i ured on @I SP12B for Pump 1-1 and PI SP12A for pump 1-7. i 1.1.2 Verifying that each valve (canual, power operated, or automa-tic) in the flow path that is not locked, sealed, or otherwise secured in position, is in its correct position. 1.2 The pumps cust be tested in accordance with the technical specifica-tions. This requires the following test quantities to be ceasured at least once per conth: Speed Inlet Pressure Differential Pump Pressure Flow Race Vibration A=plitudes Proper lubricant level or pressure (observe) This also requires at least once per year a test for bearing stabili- j zation temperature, where the pump cust be run until three successive readings taken at ten minute intervals do not vary by core than three percent. j l 1.3 A valve test cust be perfor=ed at least once every three =onths in l accordance with the Technical Sp.ecifications. I 1.4 This test is also used to satisfy T.S. 4.3.3.6 for Auxiliary Feedwater CIS) 6 Status Monthly Channel Check.
- 2. REFERENCES
( TS) 2.1 Technical Specification 3.7.1.2; Auxiliary Feedwater Systems, Limit-ing Conditions for Operation ( TS) 2.2 Technical Specification 4.7.1.2; Auxiliary Feedwater Systems, Surveil-lance Require ents ( TS) 2.3 Technical Specification L.0.5; Surveillance Requirecents for Inservice Inspcction and Testing of ASIE Code Class 1, 2, and 3 Co=ponents-2.4 SP 1106.06, Auxiliary Feedwater System 2.5 AD 1836.00, Surveillance and Periodic Test Program 2.6 Plant Limits and Precautions, Section 1.3.2, Once Through Steas Genera-tors 2.7 P&ID M003, Main Steam and Reheat Systen 2239 130
2 ST 5071.01. 9 2.8 P&ID M006A, Condensate System g2 V 2.9 P&ID M006B, Feedwater System - 2.10 P&ID M007, Steam Generator Secondary System 2.11 P&ID M041, Service Water System ! TS) 2.12 Davis-Besse Unit 1 Technical Specification 3/4.3.3.6 ,'
- 3. REOUIRED EQUIPMENT l
3.1 If needed vibration detector FMC Model No. 206 or IRD Model No. 350 ' or equivalent. Record ID No on Data Sheet. 3.2 Tachometer. Record ID No. on Data Sheet.
- 4. PRECAUTIONS AND LIMITATIONS l 4.1 Observe the li=its and precautions of SP 1106.06, Auxiliary Feedvater ,
System. . ! 4.2 The auxiliary feed pumps can be operated on Auxiliary Steam but the pump performance data required to meet Technical Specification Sur- ! veillance Requirements can only be taken af ter steam generator pressure j is greater than 800 psia. ' NOTE: If 800 psia steam is not available, this test should be run
\* /
conthly on auxiliary steam (Section 4) to assure operability, but the test cannot be used to meet the surveillance test schedule require =ents. 4.3 Auxiliary Feed Pumps and Turbine bearing =etal temperature maximum is 210 F. 4.4 b~ hen at least one 100~. capacity flow path is NOT available, the reactor shall be made suberitical (Mode 3) within one hour and the facility placed in a shutdown cooling mode (Mode 4) which does NOT rely on steas generators for cooling within 12 hours or at the maxi =u= saf e shutdown rate. 9 4.5 DURING THE PERFOPl!ANCE OF THIS ST, THE TRAIN FOR k'HICH THE ST IS EEING PERFORMED WILL NOT PERFORM ITS SAFETY FC;CTION. 17 THE SYSTEM IS NEEDED FOR SAFETY FL7iCTIONS, IT IS THE RESPONSIBILITY OF THE OPEFATOR PERFORMING THE ST TO RESTORE THE SYSTEM TO NORMAL. 2239 131 v 9
3 ST 5071.01 S
- 5. PREREQUISITES 9 (TS) 5.1 If Technical Specifications require at least one train to be operable, a visual inspection of the redundant tr'in cust be perforced according to AD 1839.00. .
NOTE: Requirements of AB 1839.02, Operation and Control of Locked Valves, must be satisfied in the performance of this test. 5.2 Perform valve lineup per Section 4 of SP 1106.06 if required by ST schedule. 5.3 Verify within the last 11 conths a bearing test run has been done or note that it =ust ba done in th.is test. 5.4 Verify that within the last two previous pump runs the valve test associated with the pu=p being tested has been done or note that it must be done in this test (required every 92 days) . 5.5 Notify Maintenance that vibration readings are required and should be recorded on attached Data Sheets. 5.6 The Shif t Fore =an has given his permission to conduct the test on the AW Pt=ip 1-1 (1-2) . L 2239 132
4 ST 5071.01.3 PHASE 1 h 6. PUMP TEST WITH 800 LB STEMi . NOTE: Signoffs for this section are on " Procedure Signoff Sheet". NOTE: Circle valves for auxiliary feed pu=p being tested. Valves for Auxiliary Feed Pu=p 1-2 are in parenthesis. NOTE: If Valve Test is due, cc=plete Valve Data Sheet 3 (4) and ICS 38B (A) during pu=p test as these valves require pu=p run to test. 6.1 Ensure that AF 3870 (AF 3872), Aux Feed Pu=p 1-1 (1-2), to S/G l-1 (1-2) Stop Valve and AF 3869 ( AF 3871), Aux Feed Pu=p 1-1 (1-2)', to l S/G 1-2 (1-1) Stop Valves are closed. 8; 6.1.1 Perfor= Phase 6 6.2 Ensure that CD 167 (CD 168).Ccds Strg Tk 1-1 (1-2) supply to Aux Start-up Suction Header, is open and CD 168 (CD 167) Cnds Strg Tk 1-2 (1-1) supply to Aux Startup Suction Header, is closed. NOTE: Either CST =ay be used for either pu=p. 6.3 Ensure that CD 170, Cnds Strg Tks to FW Iso Vlv, is open and at least 20 feet of water is available in the lined up Cads Strg Tk.. Check suction pressure on AFW Pu=p to be tested > 18 psig (PI 503/PI 507). 6.4 Open AF 21 (AF 22), Aux Feed Pu=p 1-1 (1-2) Recirculation Line Stop '% / Valve. 6.5 Check closed AF 50 and AF 51, Aux Feed Pu=p Discharge and Deaerator Drain to the condensate storage tanks. 6.5.1 Check, AF 59 open. 6.6 Place Auxiliary Feed Pu=p 1-1 (1-2) ISC Speed Controller ICS 333 (38A) in hand at =ini=u= stop and put HIS 5203 (HIS 5213) in the ICS Mode. Verify cc=puter alar = Z001 (2002), 1-1 (1-2) AFW Pu=p trouble. 6.7 Prepare for starting the pu=p as follows: 6.7.1 Assign the f ollowing to an operator group and begin group trend at 1 minute intervals: NOTE: If this is a bearing test run, place T001 (T003), .T002 (T004), T006 (T016), and TC07 (T017) on a co=puter trend also. 2239 133 v 8
, i. ' > ?
- f' 5 ST 5071.01.8 AFV Pu=o 1-1 AFW Pu=o 1-2 w/ Pump Thrust Brng OT T001 T003 Pe=p Turb End Brng MT T002 T004 Turbine 0/B Brng MT T006 T016 Turbine Pu=p End Brng Mr T007 T017 Pu=p Speed S008 S018 Pu=p Disch Press P001 P004 1-1 CST Level, or L164 Ll64 1-2 CST Level Ll65 L165 6.7.2 Verify that the AFW Pump vibration panel is energized and in operation.
6.7.3 Station an operator near the pump to be started and perform and initial the following:
- 1. Check the governor oil level
- 2. Check governor gear box oil level
- 3. Check both turbine bearing oil levels
- 4. Check both AFP bearing oil levels NOTE
- Proper oil level for the above items is within the marks on tne signe glass.
P
- 5. Ensure turbine casing drain valves and governor valve .
{ g above and below seat drains are only cracked open. Cracked open means - just barely of f the seat to prevent filling the room with steam when the pumps are started. 6.7.4 Record on pu=p data sheet 1 (2) initial set of readings. 6,8 Perform Phase 5 of this procedure at this time. 6.9 Start 1-1 (1-2) AFW Pump bi opening MS 106 (MS 107), Main Steam Line 1-1 (1-2) to Auxiliary Feed Pu=p Turbine 1-1 (1-2) Inlet Header Isola-tion Valve with HIS 106A (HIS 107A). 6.9.1 If Check Valve Flev Testing is to be performed during this test, start AW Pu=p 1-1 (1-2) by opening MS 106A (MS 107A), Main Steam Line 1-2 (1-1) cross-connect to AFPT l-1 (1-2) Inlet Header Iso-lation Valve with HIS 106E (HIS 107E) . Complete Valve Data Sheet for Valves AFl (AF2), AFIS (AF16) and !$73' (15735). NOTE: Check Valve Tests are to be conducted every 92 days. 8 6.9.2 Once the AFPT drains stops draining water and starts to blow steam, close AFPT casing drains, governor valve above and below seat drains on running pump as soon as possible. 2239 134
6 ST 5071.01.5 V 6.10 With ICS H/A Control Station ICS 38B (38A) in hand, slowly increase turbine speed to N 3600 rps. At w2800 rps AF 360 (AF 338), Aux Feed 9 Pu=p 1-1 (1-2) Discharge Isolation Valve should open. 6.10.1 Adjust Auxiliary Feed Pump speed to the High Speed Stop. 6.10.2 Record on the Data Sheet the RPM at which AF 360 (AF 388) opened.
- 6. 11 Slowly throttle open AF 23 until .> 100 GPM is indicated on PDI 2658.
If a Valve Test is required co=plete Valve Data Sheet for Valve AF 19 (AF 20). 6.12 Reduce speed to -1500 RPM to minimize valve vibration while operating AF 17 (AF 13). 6.13 Shut minicum recirc valve AF 17 (AF 18). The Handwheel should be Wit " 5 above the yoke. 6.14 Readjust speed to 3600 2 25 RPM as verified on the Maintenance Tach. 6.15 Readj us t flow to 150 1 6 in. H O2 (813 CPM). NOTE: This test is perfor=ed by adjusting flow to a given value and verifying the resultrant pump differential pressure. V 6.16 Continue recirculation for a minimum of 30 =inutes. Record data on Data Sheet 1 (2) at five minute intervals. Within this 30 minutes have Maintenance take vibration and have an operator visually observe operation of the Auxiliary Feed Pump and Turbine under test for vibration. Check all pu=p and turbine bearings and seals. List any abnormal conditions on Pu=p Data Sheet. If Valve Test is required cc:plete Valve Data Sheet for Valve AF 11 (AF 12). 5 NOTE: Only one set of panel vibration readings is necessary.
, 6.17 Open minimus Recirc Valve AF 17 (AF 18).
6.18 If this is a bearing test run, continue to take bearing data until bearing te=perature on each bearing for three successive readings at 10 minute intervals do not vary by = ore than 3%. 5 6.19 With ICS H/A Control Station ICS 38B (38A) in hand, decrease' Turbine speed to nini=um stop then increase speed to maxinus stop. 6.20 Slowly decrease turbine speed to N1500 in preparation for shutting down the turbine. 6.21 Close MS 106 (MS 107). If valve testing, close MS 106A (MS 107A) . 6.22 AtM 1100 RPM AF 360 (AF 388) should close. At this point throttle AF 23 down until shut. V 6.22.1 Record on the Data Sheet the RFM in which AF 360 (AF 388) closed. 6.22.2 AF 23 shut. 2239 135
.h' ?r -
[ 7 ST 5071.01.7 I 6.23 Run ICS H/A Control Station ICS 38B (3SA) to mini =um stop. 6.24 Place HIS 5203 (HIS 521B) to Manual. . 6.25 Close AF 21 (AF 22). ' 6.26 Stop recording data from co=puter. Properly identify and attach computer data to pu=p data sheet 1 (2). 6.27 If valve test does not have to be done, proceed to Phase 3 of procedure. PHASE 2
- 7. VALVE TESTING NOTE: Co=plete Valve Data Sheets 1 & 3 for System 1 (2 & 4 for System 2) when valve test is required by co=puter schedule.
NOTE: Data Sheet 3 (4) and ICS 38B (A) are to be co=pleted during running of Phase 1 or 4 Pu=p Test, as these valves require a pu=p run to test. CAUTION: Stroking of some valves may upset plant conditions due to leaking check valves. 7.1 Valves to be tested are: MS 106 (MS 107) AF 360 (AF 388) AF 19- (AF 20) MS 106A (MS 107A) AF 3869 (AF 3871) AF 11 (AF 12) FJ 786 (PJ 790) AF 3870 (AF 3872) AF 15 (AF 16) ICS 383 (ICS 3SA) AF 1 (AF 2) MS 734 (MS 735) 7.2 Valve Prerequisites: .
- 1. MS730 (MS729) cust be closed prior to testing MS106 and MS106A (MS107 and MS107A)
- 2. Prior to stroking either AF3870 or AF3871, vent AF38 to relieve any high pressure condition on the SG side of these valves.
- 3. Prior to stroking either AF3872 or AF3869, vent AF42 to relieve any high pressure condition on the SG side of these valves.
7.3 Valve Procedure - Using control roca handswitch, cycle the valve through one full cycle of travel. Measure and record on the Valve Data Sheet the opening and closing times using the indicating lights. Return the valve to the position found. _ NOTE: Due to the low pressure interlock function on Auxiliary Feed Pu=p Steam Inlet Isolation Valves M5106, MS106A, MS107 and MS107A, the 7 associated valve cotor controllers will require resetting af ter operation. The resets are located in the Auxiliary Building on Elevatica 585 near MCC E-ll-C for MS106 and MS106A and in #2 Electrical Penetration Roos by MCC F-ll-A f or MS107 and MS107A.
., .) . . . .
7.4 Valve Prerequisite Restoration - None except MS 730 (MS 729) must be Sefore opened af ter testing MS 106 and MS 106A (MS lQ7 and MS 107A) . opening ensure that there is no pressure between MS 730 (MS 729) and MS 106 (MS 107), 2,39 2 136
8 ST 5071.01.9 Q
~
PHASE 3
- 8. RESTORATION OF AUXILIARY FEEDWATER SYSTEM TO NOR_AL OPERATION NOTE: Signoff for this section is on " Procedure Signoff Sheet".
8.1 To meet the independent verification criteria, a different operator must complete Valve Verification List A. 8.2 Verify a total co=bined condensate and feedvater availability of 250,000 gallons of water. 8.3 Verify the following local-remote select hand switches at the Shut-down Panel are in the "RE:0TE" position. 8.3.1 AFPT l-1 Gov Control Viv HS-ICS-3SB. 8.3.2 Service Water Inlet Iso Valve HS-13323. 8.3.3 AFPT l-2 Gov Control Valve HS-ICS-3SA. 8.3.4 Service Water Inlet Iso Valve HS-13833. 8.4 Place Turbine at high speed stop using HIS 520A (HIS 521A). 8.5 Place HIS 5203 (HIS 5213) in the " AUTO-ESSE?TIAL" position. 8.6 Place ICS-3SA (ICS-383) in the "ACT0" position. 8.7 Another operator must verify: 8.7.1 The Turbine is at the high speed stop using HIS 520A (HIS 521A). 8.7.2 HIS 520B (HIS 5213) is in " AUTO ESSE?TI4L" position. 8.7.3 ICS-38A (ICS 383) is in the "ACT0" position. 8.3 Notify the Shift Fore =an the test is co=plete and the System is returned for nor=al operation. 9 8.9 Verify that all locked valves have been returned to their proper position as per AD 1839.02. PHASE 4
- 9. PUMP TEST USING AUXILIARY STEAM NOTE: This Section is to assure operability, but the test cannot be used 9
to meet Surveillance recuire=ents. This test cust be used caly in Modes 4, 5 or 6. It =ay NOT be used in !bdes 1, 2 or 3 (This it=itation is due to incomplete restoration lineups necessitated by plant conditions in Modes 4, 5 and 6). 9.1 Prerequisites 9.1.1 The Startup Section of SP 1106.06, Auxiliary Feedvater System, j has been co=pleted for the afb' Systen to be tested except:
- 1. The breakers listed in 4.2.3 of SP 1106.06 for the pu=p being tested are OPEN.
- 2. AF 599, S/G l-2 Auxiliary Feedvater Stop Valve and AF 608, S/G l-1 Auxiliary Feedvater Stop Valve are CLOSED.
2239 13J7
2 e ft' 9 9 ST 5071.01.7 f 9.1.2 The auxiliary boiler is operating in th? power code and the 235 PSIC header pressure is >>150 PSIG , 9.1.3 Section 5 is ce=plete. 9.2 Ensure that AF 3870 (AF 3872), Aux Feed Pu=p 1-1 (1-2), to SG 1-1 (1-2) Stop Valve and AF 3869 (AF 3871), Aux Feed Pu=p 1-1 (1-3, to S/G l-2 (1-1) Stop Valves are CLOSED. 9.3 Ensure that CD 167 (CD 168) Cads Strg Tk 1-1 (1-2) supply to Aux Startup Suction Header, is OPEN and CD 168 (CD 167) Cads Strg Tk 1-2 (1-1) supply to Aux Startup Suction Header, is CLOSED. NOTE: Either CST may be used for either pump. 9.4 Ensure that CD 170, Cnds Strg Tks to FW Iso Valve, is OPEN and at least 20 feet of water is available in the lined up Cn.s Strg Tk. Check suction pressure on the AFW Pump to be tested is > 13 PSIG. (PI 503/PI 507) 9.5 Open AF 21 (AF 22), Aux Feed Pump 1-1 (1-2) Recirculation.Line Stop Valve. 9.6 Check closed AF 50 and AF 51, Auf Feed Pump Discharge and Deaerator Drain to the Condensate Storage Tanks. 9.7 Check AF 59 open AFP retur= to Cads Scrg Tk Flush Connection. 9.8 Place Auxiliary Feed Pu=p 1-1 (1-2) ICS Speed Controller ICS 3SB (38A) in hand a.t mini =u= stop and put HIS 520B (HIS 5213) in the ICS Mode. Verify Computer Alar = ZC01 (2002),1-l (1-2) AFW pu=p trouble. 7 9.9 Deleted 9.10 Assign the follcuing to an operator special su==ary and trend the su==ary at 1 tinute intervals. ' AFW PUMP 1-1 Am PDCJ 1-2 Pump Thrust Brg OT TOOL T003 Pu=p Turbine End Brg Mr T002 TOO4 Turbine 0/B Brg MT T006 T016 Turbine Pump End Brg MT T007 T017 Pu=p Speed S008 S018 Pump Disch Press P001 P004 1-1 CST Level, or L164 L154 1-2 CST Level Ll65 Ll65 NOTE: If this is a bearing test run, place T001 (T003), T002 (T004), 7 T006 (T016), and TC07 (T017) on a co=puter trend also. 9.11 Verify that the AFW Pu=p Vibration Panel is energized and in operation.
\ ,/ 9.12 Perform the following checks on the pu=p to be tested:
- 1. Check the Governor oil level. .
- 2. Check the governor gear box oil level. 2239 3b;
10 ST 5071.01.8
- 3. Check both turbine bearing oil levels, h 4. Check both AFP bearing oil levels.
NOTE: Proper oil level for above ite=s is within the = arks on the sight glass. 8 5. Ensure turbine casing drain valves and governor valve above and below teat drains are only crackad open. Cracked open =eans - just barely off the seat to prevent filling the roos with steas when the pe:ps are started. 9.13 Record on the Pump Data Sheet the initial set of readings. 9.14 Verify MS 728, MS 733 and AS 273 are CLOSED. 9.15 Start the appropriate pump by perfor=ing the following:
- 1. To start AFPT 1-1 OPEN AS.273 Secondary Iso Viv fras 235 PSIG Aux Steam Hdr to AFPT.
- 2. To start AFPT l-2 CLOSE MS 730 Sts Inlet Iso Vlv to AFPT l-1 and OPEN AS 273 Secondary Iso viv fres 2350 Aux St= Edr to AFPT, >$ 733 and MS 728 AFPT Stm Inlet Edr X-coccect Iso Vlv.
8 3. Once the AFPT drains stops draining vater and starts to blev steam, close AFPT casing drains, governor valve above and below
\/% seat drains on running pump as soon as possible.
9.16 If Check Valve Flow Testing is to be perforced during this test, complete Valve Data Sheet for AF 1 ( AF 2) , AF 15 ( AF A6) , and ICS 38B (38A). NOTE: MS 734 and MS 735 cannot be tested with Auxiliary Steam. - 9.17 With ICS H/A Control Station ICS 383 (33 A) in hand, slowly increase turbine speed to ~3600 PSM. At
- 2800 PJM AF 3 60 ( AF 338) , AFP l-1 (1-2) Discharge Iso Viv should open.
9.17.1 Adjust AFP speed to the high speed stop. 9.17.2 Record on the Data Sheet the RPM at which AF 360 (AF 388) opened. 9.18 Slowly throttle open AF 23 until.. 3 100 GPM is indicated on FBI 2658 If a valve test is required , cceplete '.'alve Data Sheet for AF 19 (AF 20). 9.19 Reduce pu=p speed to -'2500 RPM to =inini:e valve vibration while operating AF 17 (AF 18). 9.20 Shut miniswa recirc valve AF 17 (AF 18) . The handwheel should beev k" above the yoke. 9.21 Readjust speed to 3600 1 25 RPM as verified on the }bintenance Tach or
\- ' to the high speed stop if 3600 RPM cannot be obtained.
9.22 Readj us t flow toes'150 6 in H O2 (313 GFM) . }}}} )[h NOTE: This test is perfor=ed by adjusting flow to a given valve and verifying the resultant pe=p diff. press.
11 ST 5071.01.9 - 9.23 Continue recirculation for a minimum of 30 minutes. Record data on Data Sheet 1 (2) at five minute intervals. Within this 30 minutes have Maintenance take vibration readings and visually observe operation
, of the AFP for vibration. Check all pump and turbine bearings and seals.
List any abnormal conditions on the pump data sheet. If a valve test is-required, complete Valve Data Sheet for Valve AF 11 (AF 12). NOTE: Only one set of Panel Vibration readings is necessary. 9.24 Open minimum recire valve AF 17 (AF 18). 9.25 If this is a bearing test run, continue to take bearing data until bearing temperatures en each bearing for three successive readings at 10 minute intervals do not vary by more than 37.. 9.26 With ICS H/A Control Station ICS 383 (38A) in hand, decrease turbine speed to minimum stop then increase speed to caximum stop. 9.27 Slowly decrease turbine speed to ^-1500 RPM in preparation for shutting down the turbine. 9.28 Shut AS 273, MS 728 and >S 733. 9.29 Atsa /1100 RPM AF 360 (AF 388) should close. At this point throttle AF 23 down until shut. 9.29.1 Record on the Data Sheet the RPM at which AF 360 (AF 388) closed. 9.29.2 AF 23 shut. 9.30 Run ICS H/A Control Station ICS 38B (38A) to minimum stop. 9.31 Place HIS 5203 (HIS 5213) to MANUAL. 9.32 Close AF 21 (AF 22). 9.33 Stop recording data from the computer. Properly identify and attach cc:aputer data to pump data sheet 1 (2). 9 9.34 Reclose the breakers listed in Step 4.2.3 of SP 1106.06. PHASE 5
- 10. AUXILIARY FEEDUATER SL'CTION PRESSURE I'TTERLOCKS AND INLET STEAM PRESSURE INTE2LCCKS CE?CC:EL E!CTICNE TEST IIOTE: This Phase is to be run bef cre Step 6.9 of Phase I of this procedure.
10.1 Close SUS (St:6) 2239 140
12 ST 50 71.01. 9 10.2 Close MS730 (MS729). ~ 10.3 V Isolate PSL4928A and B (PSL6929A and B) and simulate a Icv pressure.
- 10TE:
If valve testing is required in S" 1322 (Me 1332) Joe ST 5072.02, Service Water Systes Refueling Tast, record the data on the va.lve sheet of . . 5Fi.12. 10.4 r.asure that FW786 (FW790) closes automatically. 10.5 Ensure . hat SW1382 (SW1383) opens succest.ically. 10.6 Place PSL4928A and B (PSL4929A and B) back in service. 10.7 Ensure that SW1382 (SW1383) closes automatically. 10.8 Ensure that FW736 (FW790) opens aucc=atically. 10.9 Isolate PSL4930A and B (PSL4931A and B) and simulate a low pressure. 10.10 Open MS106 (MS107) and ensure that !!S106 (!S107) recloses i=ediately. 10.11 Open MS106A (MS107A) and ensure that MS106A (!!S107A) closes i=::2ed ia t ely. 10.12 Place PSL4930 A and B (PSL4931A and B) back in service. 10.13 Open MS106 (MS107) and ensure that !!S106 (MS107) recloses af ter approxi-mately 25 seconds ti=e delay. ' (Time delay starts af ter valve is full V open). It uill ;,e necessary to recet lo" nressure s.iitc'.tes after auto closure of the first staan suppb valve as low pressur: interlock
- closes both steam valves to the AFPT.
- 10.14 Open MS10cA (MS107A) and ensure that :! SIC 6A (MS107A) recloses after approximately 25 second time delay. (Time delay starts after valve is full open).
10.15 Reset MS106 (MS106A) next to MCC E-11-C (Auxiliary Euildin;; 535') and reset !S107 (MS107A) next (Independent verification required)to MCC F-il-A (:!2 Electrical Penetration Rocm). 10.16 Open Sul (SW2) to insure that S*.*1382 (SW1383) is not leaking by at all. (Watch for at least 5 minutes). 10.17 Open SWS (SU6). (Independent verification required) 10.18 Open MS730 (MS729). 9f !:0TE: AFPT will roll. NOTE: Return to Step 6.9 of Phase 1 of this procedure. .
- 11. ACCEPTA'!CE CRITERLA 11.1 The Auxiliary Feed Pump 1-1 (1-2) develops a diff erential pressure of 1070 PSID on recirculation flow.
11.2 The Acceptance Criteria for each valve on the Valve Data Sheet has been cet. 2239 I41
13 ST 5071.01.3 . 11.3 Each valve (manual, power operated or auteratic) in the flowpath that N==# is not locked, sealed, or otherwise secured in positics, is in its correct position. 11.4 The average of the dacq taken f alls within the following rauge: VALVE RANCE Suction Pressure Within cperating procedure limits Differential Pump Pressure .93 SL* to 1.02 3L* Flow Rate .94 SL* to 1.02 3L*
. Vibration: See Data Sheet Turbine & Pump Bearing Temperature < 2100F NOTE: BL* is baseline data value for that partneter.
11.5 Auxiliary Feed Pump 1-1 (1-2) Discharge Isolaties valve AF 360 (AF 388) opened at approximately 2S00 RPM and closed at approxt:stely 1100 RPM turbine speed. 11.6 Speed changes using ICS 383 (38A) were unifern. (i.e., no hangups or sudden changes). Step 6.19 or 9.26. 11.7 FU786 (FU790) closes aute=atically and S'.*1352 (S*a*1",d3) opens aucc=ari-cally when pressure is bled frc: PSL4923 A and 3 (PSL'929 A and 3). 11.3 MS106 (MS107) and MS106A (MS107A) close t= adiately after fully cpening when pressure is bled frc= PSL4930A and 3 (?FL;931A and B). 11.9 MS106 (MS107) and MS106A (MS107A) close apprezi=ately 25 seconds af ter fully opening when MS730 (:!S729) is closed. S 11.10 The Sodine Motor in the AFFT Governor, d::.e in the proper direction when AF 3870 (AF3372) was opened. 11.11 The Bodine Motor on the AFPT Governor, dro7e in the. proper direction when AF 3369 (AF 3871) was opened.
. 2239 142 C.
s
14 ST 5071.01.8 PHASE 6
- 12. TESTI!!C THE AFPT STEAM CE!;ERATOR LEVEL CO:ITROL SYSTE}t Q
110TE: Signof fs for this Section are on " Procedure Signof f Sheet". 12.1 Record the level of the 1-1 and 1-2 Steam Generator in the Startup Range on Procedure Signoff Sheets. 12.2 Vent AF 33 (AF 42) to relieve and High Pressure. 12.3 Open AF 3870 (AF 3872). 12.4 If the Steas Generator level is greater than 96 inches on the Startup Range; Verify the Bodine !!ator on the AFPT governor drives in the decrease direction (CCW) . If the Steam Generator level is less than 96 inches on the Startup Range; Verify the Bodine Motor in the AFFT governor drives in the increase direction (CU) . Record direction on Procedure Signoff Sheet. 12.5 Close AF 3370 (AF 3872) . 12.6 Vent AF 42 (AF 38) to relieve any High Pressure condition. 12.7 Open AF 3869 (AF 3871) . 12.8 If the Steam Generator level is greater than 96 inches on the Startup Range; Verify the Ecdine !!ator in the AFPT governor drives in the de~ crease direction (CCW). If the Steam Generator level is less chan V 96 inches on the Startup Range; Verify the Bodine >totor on the AFPI governor drives in the increase direction (CW) . Record direction on Procedure Signoff Sheet. 12.9 Close AF 3869 (AF 3871) . 2239 143
,..aI * . . ,./,
8 a m_ p;o e-.. . .. ; p.-
. n . . . . . . ... . .. /.' / . - - - --
ST 5071.01.2
- g. ,
. . - - -a -- ,t - . --
__ . ,l _. __) . 8 V:. t-
- l. ___: . _ .~. . ' l . = . : 5.-3_.. .
- --_ h __ _ __ 3 l L. _
l .. . _........__ . ... . . _. _. . ._ ._ . .._..____..__._._.t___ 8
- . . . _ ._.____.t_...._.__. ._. . . . _ .._. _ .. _, . . . ._ . _ _ . _ ._
r_.... _.____._._____i.. ._______i
. _ _ . ..._..__i.
___%,_______. __ _.__9
, _ _ _ _ i . -- -_ _1.-- : e j i ~n ~ ~n R Vr_-s - Msi :~-@ - - : 'r_r. == -s --i:15 5 -_- ' : - ! _ T . 1_;.- i
- c. 6=:_.- . _ - . . - .._....::_---. _- - .} _: - -; =- .- -- y-== - -: _. :::= =:=: a: * : _=- - _:: =_ .=._=_ .;.=- . _ . = :-- .._:_._- ._i
=:r - _ n. _ = .a . . __ _ _ _ _ _ . _ . _ _ _ . _._ .. _. ___ __.__ - . . . _________.r.___.___.__t_____._..
__.__.__...___._.._..__._.__._t
.__. _ _.___ _ . l
__ ._.a _7._-__.._. _ _ . ,
- p. . _.. .___._. __ _ _ ,__ _._ .. . . _ , _ _ _ . - - . _ _ -
g- - i ' .
, , 9 ; L_ ,________,,
6- . 7 ,. _. --__ j 1 i i i i . 1 , i _t i __J . i
/
i t
/ i i ,
l
- g. . I e 1 : i ./ .
i .I . ' ~~' p Q -. . _ W . _:_ :. . _:x _ y._ :w .= _ t =.- -- .:.--; --i f- _ .-- _: _ - ..- a. .- - . = = . . _ - ~ ;_ . r .- ' _ ~.= . D t _.
?:_ -. . , - ; : == =_O _d ; -- _ - .= := =_ _: - . f. =- - . . -- . =-- . ===--W M. -- - u -
na -
-- -^
_,A g __-.-w=----..=__._w._...-._.------.--.=/::.__=.:_.___=.--=:____;:.._::=_=__._.-... _ _ _ _ . . ._ : = _1
- ----.___ .::--- - = - - -
_-- m- [
%.s g .=. .,. ___-- .__-.____ . - __;r. .: _ = _ - ^
_. _: . __ = .- r_ ._: .___ - _ .: . __. _- .=.__ .: _ - - _ _ y_ :. .__.
~~.'~'~y
_ l_;_ . . - - __. _. p e- ,____.
.- _ . __ . _ . _ _ . _ _____.._ _ m .__ _ _ _ . _ ._
___J
.._ +_ __.. . _ _ _
g_ h ._ ___. .___. . . . .. . _ l - --- = _ ..='- -.~5. _E~ . _ D. _-/_ :- _" . . - . _-T i "- _ : . - ".E 9J -; - W. - '- E. _ _ . i
-- --- ----------__.._=..:_.-
1 .. L_ f=.. : - - - -____ = __.__
=. _. ._ __ r._ : _.
_ . _ _ _ _ __ /_. . ...._ .. l___ _:= = _ -_._-/_:_.__.-----. __ _ _ . _ . _ _ _ _ . ---*:.____.:_-=_"_._._.-.-.._._ ___..__._.L. - _ __ _ __ ._ _ _... . ._._..___...1 y, _ - - $__ _ , . . . e.n , __ o, a
' . -_ w_ _ _ - _ _ . _ _ . - __
o. _ _ __.. .. ...._i x. l ,
--I _m. --VT-- 6. S-- 8 d - -- -- t
_i . i
\ , . - - _ . , _ . _ . ._ , o ., . -*-., __.___, !s 3 I
_.d. .e t . _. * . l . # .J -
-/ -.---*t. : . -- -. _ _ _1 i !
u =. I \ . i I \ . .- _
-.<,i ..A (: - t.
i I 3:
._ 2 $. g I ! & I i f 9t . ._. _-._.__s . z-. .=--i;=.-- . .- . . _ . - - . . = . - ---
__j.- i r. . 4 ._ ._. . : ; . . ._ ..j_.;_c.- _- _ _ _
, t .; . . ;
S$i
~ ;:. 7 ,G= _ . _ _= . _= - .'__: ___$.'~ . _ _ . _ . _ _'. _ _E _ . _. . n -'_ =b _ . . _ _^=.~ __=.__'= - . i-~-^-_ ^_= _~. -- _6 _=
( : , :, , 'ib s b g - ' ! _ __ _..___._._-__ ~f~B
-i__..___.___.__.___ . _ _- _._ ._ _ _ , . _..__ _. __...
_..__t__.__.._-_...__ y _ t- __ __ ___ 3 ____...l__________. ___.1....__ _.._____t _.i.___ . __ __ .___..._____.. 4_ , _ _
.___..l m._. _. - . . _- i . =_E _ . .__. . . _.: ' _ =_: _ : . : __n. .u.__ 2 -- _ _. - 1: 1 =_ br__-_ -- . . _ . :_ : . _: =. _. _ _. . . __: =._ r. ,? _ - -
x.__. _- - _ :=. . ; -_ _ : : . :. =_ ; .
-- 4 3 l . . =_- _ _ . =__ .: : - : _ = ---. - _ - .--:.__.-- -- --~~_- = - - . ._=-.:.--._:-. : - -- .
- = . _: ._ r - - - -- _ = : - - - - z - - :..-
- . =:- ~2l
_..:___,. _ _ _ _ ., . . . _ . . _ . . _ _ . _ _ _ . _.__.._.._...._.__l_._.__.
.L- _ ._ _._L___.._._.__. __..__._.._.. . -_. _ , . . _ ._6...__,,__.._r____!
t__.._._ _ . . _ _ - a . __ .. . .. _ _ . . _ _ _ . , . . ....___g. ._._ _ _ e ..,____i._.,_ _ _ . _ . _ a
.a i.....
_e __ _ t_
. _ _ .___...,_.__.9._..__y. . _ _ _ . _ _ . . _
_.y . ...,_ _. _ . . _ . _ . . _._ ____._. .._i 4 i_ - _-._ ),.7 _-.._.-. ___ . . _ __. _.J *
._.-ig 4..
_, ._..I
,.__...e.___._.____i . .
_q. ,
, .- _ p ]._.__. .._._.___..j -,ii6 ._ _ . __ l . . ._ .i - i -._.__ .. _I_
L i.iiiei . : i . i ie i i .
- l. i 1.00 Lt C C, (Cc SC WO h f
RN "
}fg
] BAq Wmm%_ }}}}
ST 5071.01.3
. 0/y /r ".) ry *m i_.1. .s _2 . -
O O 3 -G ., 3 m.s .o. sa g 3. 5. .+ n .O . s,
.v, r.n , , d. ,g4 s y %d "O.-J' M d'DT M H M ,. .L p.J. w . j./ gg ry . - _ __..._-
_.._...-...__.n_.._.- . .-. _.
=
9 q 4 .. 5 C 0. p,....... 0 '
- n. n%
m_.4
- v. .
.. _... .. .. O y . .. N . .. . .
1.. .
. .J 3 e.
e. s . . . . 1 ( . i 1u ..
... ... . . - . . . . ,. . .. _ . . . . . . . g .c . . . . .-. ...._ _ _ . .,.) ,>. % s. . . . ..=. .. .. _ . . _ e. ua9 s o .s I. ... Q . . _ . . . . . _ . . .. . . . .. . . .a n .e.s (f. 4 iU
- r. ..
$..__..~..._....C . . . . . . . . . . _ . _ . . . _ t,
_ e
.- .: . - m 2 g .' =- - e
- A
... . .?/ ... . . . . . _ .. . . . . _ . .... . -. . . _ . . . . . . . > ~ o ..
y e, y-
. ) c., s ,J, . . .- ..s. .._ .... s .y. .J g ,. .3 s
n
. . . . _....n.._._..._._.. , . .. __.. . . ...o _-._.... .. .I>. . _., . _ .. .- . s ..r.. . _....
I. .
...._.... _.t.._.__...._. . - . . . _ _ --.~c . _ . .. ._.. ..>. _. _ . .- .... . ..
_. .. e.a _. . . . . _ . . _ _ . - . t s .. _ , . .._..
- . . _ . . \/ .T. . .. .- , t . . . l . j . (, ,V . = .N.\s =g=*8 % _... * ...__._...,..._.L .._. . s,)
L C* l....._. ... . .. . .. . . . . . _. . .l- d. g
._l._ .. s . ... _ . . - . . . .. .. , ._.. . . .1... ... ...._ ..w_ . . . . , _.,_ ...- .. _. . .. _ ....
er .4, 4 . ...\ . h,,p ., y e
\i .. . [- ..
g f% w\ ..
... e . __ . . g k - , U.
6.. . . ,I, . z. . . . .- ._ .t . . T
. _ _ ., ss . .. d ,,. . .o 1 -_ ._.
a .- . . .'._. .
... _.... . . ..._f.,",',-..,... . , . . . _ . -
J, I O, . _ . ws
. - . . . .__..e..._
S G - . ... .. ._ . .4. .. . .. .T .
..~.
p . _. ..
.... . . . . . . . .. . p g . . . . __ .. . . - .. . _. .. . . ... . . .O C_. )
t = 0 . . . .
. . .....N -f .1 ,.l ._ . ..... . . _ . . . _ . _ . -. -_ .. .... _ .. _ . . _ _ . .
gj. m . p. I,
. A . .\ . _ .. . ,. N ... ..-- - .....a. ..' d.
g . . . n
.-.3 .... . . . . . .e _ . _ _ _ _ . . . . - _ . _._ . ..._..s s, _
e
* .. . .. . o . .. , (l .. . d ss .s Q .. . - -.. . . . p' . _. .
3 m .. _.._. _ ., ._ _ 3 . v . % __ _
. . _ _s .. n%.
- _. . . . ... . . . . . . .
,q .. . . . s, 3, .p, . . . ... ~.. .. . . . .. , Qi . q
- s. . ..
(%
.= ~ . : . Q ..v..___.. .. . - .fl._.._.. '~
i . N - [ 3
.s . . . .
I , , c.' e w 3 v s ( i o .i . .s) O v O
, : c- t 6 a Q. z- N .
N._. - _. hSd 2 D/ C ~
'I ~-M .
ATTACHMEh~T 2 I i I ' Sheet 1 of 2
-....t....._.._ . - - . - ...i....... . - . . . . . . . .
o"og P M{f w = 2239 145
Il SI $0/1.01.3 0/ s ./. rN u > t -f. .1 J O ^
. .) , , "3 * , ')
m.,., w O.
. . . ). ..
o ei O s .T, s cn e%
, 1 -
9
" enc 3 'D 5 D 0 H m %d J 3.'M_, . vo . .l. .' c4-ry
- O
..g.. ._ . .. . _ . _ _.
4 e v.._. . O. W,
.__.. g .O , h, . . n. _. . pa ......
m . .. g .. rn
.. N .-
N (f) . .6 .
.; i
( ___a s. . .. ~2 d
.... j ,o. .. .. .... .. .. . 3 ,2 '.s
_.............._.q...
. .._ q .),, q rs .( _ .a. V .. . .. . . . es ... ..... _.. ._.4 , . . . . o i, - . . . .d cb -.f._._... . ,a_ . .V. .q(.
_ e_
. . . . y 2 ._ . . \ C ,
g
._..._ _..._ . ~. ... O > . . ..i 4 s,,;.i., w,
- :. . . . _ . . _ .. . w s . .
. e, .. 5 . .. . . . _ . . . . .. . . . . O 3 4, .g g g ,. ,,s.., s, .
l,.. . .. . .. ....._..r,, _..s. . .n. _-_ .
- e. .._
... _. J .. .__._......1.. _. ... .. ._. . ..... ... ..... .. ..._.._. ._..._ . . . _ . .. _. _.i.t. g .....__d ._ _ . . . . _ . . . .....-............_. .--_t. ,, ......._a .
_._.t......_.._.__ . _. _c r*.. . ___._. . __.. ...-- ...... . . _. . ._
. . . . .._......Q.s...._.._ -. ._ .. 1 . _. . --
y y . /x ....
. ~ . . . . ... . t.. . . .. .. _. .. . . . _ . _ . . . ......_._.__._.L_._.. . . . . - t.q ..-. _ . _.. .. _ .._ .. .....b..>. _..._... - <4 . . . . . _
y _. . . . . .
.t .3,_......_-._.. .. .._._. . . . _. . _ . ._._.__... _. _. .. _. ......_...._.._.. ._.. ._. _._. _.___..a ._ _
O. ,_
- _..4 . . .. g ~1 ., C' .. ., . . .
_. . . . . . . ... ,_.s.
-.......s,, .
e , s . . .. . ._ .. . . . . . .. s
- 0. ,. . _ s. , _ .. .
5
. - .- qq q.
z .
.t<.'- ~ -* %s C ... ._ _. .__. ... _ . . . _ . _ . _ _ . , . _.3,........ ..s. .t O, l'1 ,__ . . _
_..t.,._._.... _.. u. _ J,1 y ... __ ..
. . .____ .. I. ..,
y) _.. . . _ . . _ . _ . . .-. . . _ ._.
.3 . .. .. . . .= _ . . ... ... .._.. .. . . _. _ . . I
_9 O
. . _.,_.. .\...........t_-._
Q. ;..._...
., , : .... . . . . _ . . . . ... . ... .s, c.-_.. ,. a . _ .. .. .. .. . ) . _ _ .
i .. y 9't ... _.. ... .. ..._._.... ._. __. .. . . , _ . . . . . . Q. . . 1.1) (<1 3 ..
... .vt g . . . _ . _
s, ..
.....v..._ ... . . . . . . s,
., o ,. a ... .
. . v 6 ... . .Li _.._.._..._. . .. .. . .. . . _. q Q ,, . .. ..__.n, ... . . . . ._. . 61 . _ . . ..>-,s _- . s. .,3,.. .. . . s.s ..., s,,. .
t .. . - .
..._.s. .
. I ._ k I w._.. Q
) .
__. ._. . _ . . . . . _ _ . _ _ . _ _ _ _ . . . . . . . _ . ,. .s eJ f C
. ', .. _v 9 . .
g o , Q d.3 y 6 d o-4.e v s s- , (/Fg .3 ?lt45'Ul/(f *_-f.-f /Q ATTACEST 2 ] Sheet 2 of 2 , _...._...y" om ,
" %. %. t k AC 9 "
m 2239 146
10 ST 50 71.01. 7 , '3 0022 THE TOLEDO EDISON COMPANY ' POWER PP.CDL*CTION DEPT. i TEST READINGS Sheet No. 1 , .:ag Davis-Pesse cr 1 rest of IIo.1 Aux Feed P:p . Pa e No. l Observers rest No. ST 5C71.01 1 1 Au'x Feed Pu=p Jate rice
' SIh5A ' Maint. Once ,
1st' No* Lon1 ' PIS01 PI2659 ' PD C265S PISP123 PI305 PI2561 FI2L21 w onh-Speed;Pu:p Pu:p Diff. Test Stm Gen Tu b. Turb. T=b. Equip, oil Lvl Indit;.Su t. Disch. Pu:p F10v 1 Chest Inlet Exhaust No. Between ter , Press Press Pres s . D.P . Outlet press Press Press ! , , Marks 3 REMARKS l Time o c-Q20 Sts_Pree n.c 75 7 32 0
, IQSL2e3600 20 7 1130 150 _375 910 __._ . .3 3600 NA __21se ti e Data
- 1200
' ! ors 13GP'd Before Startin: ~ ' ~ < i r g i e t
3 l ! i i __ 8 g: N P Avg = (Outlet Pressure) Avg - (Inlet Pressure) Avg = PSI GPM Avg = E3733acy tent _gq, _1 Acceotance Criteria
- 1. The Auxiliary Feed Pu=o 1-1 develoos a dif ferential pressure of > 1070 psid en Verified Date recirculation flow.
- 2. The average of the data taken falls within the following _
range: ALEET RA?! gel LO'.1 VALUE HICH VALL*E VALUE ACCEPTABLE RANCE Sqqtion Pressure Wi t n i n._Op.ef a t in g Procedure Limits D1.f f a tgn t ial._Pjatp__. If 04 to 1215 Pressure 1097 to 12 04 10 62 to 1097
'~ '
F1cv Ra:e 764 to 830 732 to 764 830 to 838_ VihIari;n Sca._ Data _.She C
' . Veri fie d Date -i ,
Speed Changes were uniform. Verified Date AF 360 Cicsed at AF 360 Opened at RP'! RPM h'. Ifuntil deviation f alls within the Alert Range, the frequency of testing shall be doubled - t the cause of the deviatica is determined..and the._ condition corrected. , I I i Pericr ed_.Byl_ _Date_! _ _ _ _ _ _ i 1 2239 147
. u to co22 ST 5071.015 THE TOLEDO EDISON COMPANY .
POWER PRODUCTION DEPT.
" Davis-Besse TEST RZADINGS Sheet No.
N . 1 Aux Feed Pu=p cr Te Test No. ST 5071.01
- 1-1 Aux Feed Pu=p
^
Date TIce fY 4Y Z'l ZY . Int. No. 817B2 ! 817A2 ' 619A2 619B2 l i Turb Turb iPump Pu p - g /B0 PepEnd.Turb 0/B l i i Brg Brg }End Brg i REMARKS T!=e i V1B iBrgVl3 VlB V1B i ; , I i tBaseline Data . 1.0 1.0 0.6 1.0
- i i i i iBefore Startir i ! i i i !
3 l i i i i ! i i i : i ' i . I I i l 1 i 1 , i I i i i i i . i I t ! l i i e i I 6 I I I i 6 i l i , . .
. . i i i i i i I ' i 3 i , 1 i i i . i h t i - ! i e i i t i I , I i i
- i I i !
t , I I i l I i
, , 6 i i i
i i t i . i i a i l i i ! i ! i
! I i 3 '
NOTE: This is baseline data and not licits. I i
. 'Only one set of data needs to be taken. I i I I i i ~ ' ! I l I i l l 1 I i i ! ! I i ' ' I i i t I i l i . i l I I i ! I i l i i ! i , I . i , I l t j t l i e i i i l l l l l ! i ' i i l i i i . . i 6 '
n . 2239 148
ST 5011.01 T,,, 20 D^r e
- Feed Pu:
Auxiliary STATION 1-1 R POWER l
'* W E*. 565' l l v Feed Puc O AVIS.BESSE RECORO NUCLE l l lAl l IuN$11ar Vl8 RATION l l
- y[2$[ ' 'rauuest gem ,. so.
to 6 703 l ms l l ll l l l l lI l l
' ' I l l l l 1
vis a a rio.3
##""# # " ascoao , , ,...
l g gl . ,,,,,,
- V l ;
l l Notes , .. . u m " * "- ' ' ' - g i C I Pump! 1j D j l ***'"' t ll l i } j A l "darb lh i i li lo ; l l I . II l i ll l 1ll Ii lI l I1Il ll ll i l I ll l i l I l lIIl l suao _ l Ii 4. m t l[ .~uomi a ("Jl',f;;" 5;; u,, ,,, i ll III v.v ,m., r,trea *l5jc l c, . cru l *l55 c l vec me surcs ,,tr aa cur c,u l cru l*;55c l l s m,sec l cru lm l l l l { i l AV l t i . l l l H l l l A l i l l evH l l I l l V A l l i l l 1 3l cvH l
}
i I l l i i l A l l I l i ovH { l l l i I i i l l l I i i Al I l
' I I l i I l V! . _ah 0.18 ab a !V is C-e* e oint 1 ils NO value fo'r ce ce$ O.0i.5 t$1.0 double l Bas'eline mils l l Accentable Ran1 0! to Ran~e: ei ingssnl i f Ale t I 3
Pu: G_ s.Aall_hg_daqla. l ne_ _ I
- } i ! l h l i i I
[ l I i i i l I I I g I I :Y s *t'e t aEVf EWie SV 40 ATE cCM MENrs.
* %fN dY
91 ST 5071.01.7 to CC22
~
THE TOLEDO EDISON COMPANY , POWER PP.ODUCTION DEPT. Davis _Besse TEST RCADINGS Shet No. 2 3 ... CF - Test of ::o. 2 Aux Feed Pu:p Pap No. 1 Test No. ST5071.01 Chemn 1.2 Aux Feed Pu:P Date Tice
=_.
A "aint Chee Int. No.3I PDI2658 PISP12A PI310 PI2563 FI2555 " Tach [ only Lc:al PI507 PI2660 S,eed r Pu:p Pu P Liff. Test h y Iurb. Turb . Turb. Equip . 011 g Indica Suct. Dis"- C' p F_cw let Chest Inlet I f.aust N' o ' Levels' tor Press Press Press D.P. S t:2 Press Press Press Between REMARKS Tine EEi PSILP.SM P CD_ r M 0 _ Press ~g, ~ pg G PS ; rks
' 3460 20 1280 1255 150 or 3'20 930 . .5 3600 'A u ts , t 4 ~ Data S13 GPM . g } u.c-.. -.4--
i 1 I f . g:
.- A F Avg = (Gutlet Fressure) Avg - (Inlet Pressure) Avg = P31 GPM Av8 * "g M 3 2.cb eat '!c . 1 Acceptance Criteria
- 1. The Auxiliarv 7eed Pu=o 1-2 develoos a differential cressure of > 1070 osid on recirculation flow. Verified Date
- 2. The average of the data taken falls within the following range:
VALUE ACCEPT 13LE FX;GE ALERT PE:CEl Suetion Pressure 'li t"in 0:e ra t in t
- LOW V w?E HTCH VALL'E Pro.gis Ki_Llatts Differential Puco ll67, to 1280 1129 to 1167 1280 t o 1293 Pressure ? lev ?. ate 764 to 330 _
732,to,764 330 to S38 Vibrati:n C2a ' C"cer Verified Date Speed changes were unifor=. Verified Date AF 3SS Opened at RPM AF 3GS Closed at RPM
- 1. If deviation falls within the Alert Range, the frequency of testing shall be doubled until the cause of the deviatica is deter ined and the conditinn corrected.
l !
' _Qage Perfo med_.37 -
22 $! 5371.01.5
- E O Co22 THE TOLEDO EDISON COMP.ANY POWER PRODUCTION DEPT.
St- a Davir-Besse TEST RZADI GS SWt No. 2 A No. 1 Aux Feed Pu=p cr ' Q{ Fa p No. 9 . _ Test No. ST 5071.01 Obie nirs g Date , _T!=e ZY ZY l t Int. No.! lZT 818B? lIY ' 621 A 2 62132 ' l 818A2 l Turb 'P=p ,Pu=p furb O/B Pu=p Turb ,0/3 l Time Brg End ,End iBrg REMARKS 114 E; gym;gylA_t'14 l
! l i + - i 3aseline vata
[I i 2 i 1 i 0.5 0.5 a i 6 i i Before Starti.c j l i i I e 1 : i l i I i i l l l I e l } l e i I l l l I l 1 . l l l ' l l l 1 1 I i i ! l i e l i I i I
! i l i i
_l 1 ' i V I i
- i I i I i ! i !
6 e I i I i a l i i i 1 I l i l i l i l i I . I i i ! i l i i I . , 1 I j i i i i i i l I l ! i i
! l ! , !
I i i i I I i i i ! l e i t i ' l i l i 1 ! l I i ! i i , i l l l i i l I t i i I I i i e i i I l . I i I i 6 l t i 1 5 = :;0TE: IllIS IS A BASELI:;E DATA idiD liOT LIMITS. 1 i 3 i ,0nly one set of data needs to be taken. i ' t i 4 l l l !
! I t 1 l l 1 i i i i i . #
2239 151
32 ST 5071.01. 8 FACE 3 of 3 ' 10.1 Verified
%=/ 10.2 Verified .
10.3 Verified , 10.4 Verified i 10.5 Verified 10.6 Verified 10.7 Verified ' 10.8 Verified 10.9 Verified 10.10 Ve rif ied i 10.11. Verified l 10.12 Verified l 10.13 Ver if ied 10.14 Verified 10.15 Verified Independent Verified 10.16 Verified l 10.17 Verified Independent Verified . I 10.18 Verified 11.1 Verified 11.2 Verified 11.3 Verified I 11.4 Verified 11.5 Verified 11.6 Verified 11.7 Verified 11.3 Verified 11.9 Verified \P"# 11.10 Verified 11.11 Verified PHASE 6 12.1 inches (1-1) inches (1-2) 12.2 Verified 12.3 Verified 12.4 The Bodine Motor drove in the direction Verified 12.5 Verified 12.6 Verified 12.7 Verified 12.3 The Bodine Motor drove in the direction. Verified 12.9 Verified 2239 152 O END
DAVIS CESSE NUCLEAR PCWER STATION 23
- VIBR ATION RECORD :4 s riva E O 6703 A % P \'
I I I I I I I I I l l l l 1 I l :Y d . 555', Auxiliarv Peeenumo Roc = l I l t l i l i l i l i l l l l l l l l l- ~ Auk.....[f-i 1 reed pu 3 1_2 I I I I IL I I !ii!l l '= m w :- l l [l 4}l l l l1 l v.a a a T :s . s sT = .v a .; z :.>. so. 0** A l Turb l lB 'C l Ph=p! D ! l l W {l l *l l> l scTas. =t::=: 1 : . .- a s T :ss = Arics At cATa
. . . . : :- 2 : . i.-s no.w .- : : . v: . - i. ::
l l l l l l I II I II I II I I I I I I I I I I I l l 1 i fIl l I I II l l l l l MACHINE SKETCH V Vertical H-Horizontal A A m.as !FEIO RPM FILTER CUT FILT5 9 l'. ( , ,'[ , ," ,, , , , ,
)
iN/s t e Cru wts cru INeSEc
,ts CPM l',,3 08V ,, g =
C=M ' "{ ,$g3 CPM A-V l l l i l I H l l ! A l l l , B-V l l l i l l H l l ,
! l A l l ! I l l 3l c-v i I I i ! i H l l l l l A l l l l l l D-V l l l t l I H l l l l i i
Al l l l l l l l l i I l ! I i l l l I I l l l l !
! i l l I I i l i l I I i I i I l ! ! I l l I ,
NOTE: Acc'bp t an ce! Crit. r'ia for 'C- V! above l ! l I Baseline v'alue f$r point C- '7 is ". % 111s as of 7/22/77 ! I uder,81 % r,, .I 0. 0 to 1.0 riis - _ _ l I I l Alebt Ranke: .0 to '1.5 mils - d ruble t es:1. g_f n recuencv l l Puch shall. be declared inoperable 1 1 : -41s l 1 i , I . i i COMME N TS. UATA TAKEN dY OATE iH E VI E W s 0 SV *
.e- t'e :e : , ee . _ ATE ??39 15'
i VALVE DATA SitEET NO 1
- ST 5071.01 REV 4 WSS OF yAyyg y3tyg ACCEgerANCE CRITER STROKE VALVE VERIFICATIO!I OF C0!! Tit 0L STROKE TitAVEL By STit0KE TIME IWER RET'D t It E.R Eg TIME MUST BE WITillH
- VAINE g.gg.
OPERA. TO ORIC it ts tonti. NUtful'R SUIICII REO g,g , , l'OSITIOtl STEM I - TION (l'ANEL) :gr gg,y,e ll TIAL FULL gg 3s org Eu 014.tl CI.0SE tilSIO6A *1 *2 NA ItS106 gg57y7) NA NA NA I 36 see
*2 Histo 6E Al **
HS106A (C5717) HA NA NA NA Sym, 1115786 1U786 (C5709) NA NA NA NA NA NA f. 4g see lit S360 l
- NA NA NA NA 3 46 mec AFV 0 (CY/0)) HA NA lilS31L*) j N
At4F69 (C'f/(6) flA NA l NA NA NA NA f. 34 see
, Ill:J3ti/O f AF3870 (Cy/u6) tiA NA NA NA NA NA $ 34 see , ,
III S ICS3811 l IIA l 13A fia 13^ flA tu fia (1) ICS38B (C5709 L 11A ACCITTANCE 1:I TI'H l / has bi AccegEceCri}eria fue each .v.alve inn the v itve da 'a shec en met. . Tlic I l M:rified Date , u NOTE: All spaces next to valve no. must be filled with an initial or N/A (not applicable) Q t H
- List in comment s methoit useat in itetermininE valve t rav.:1 ~ '
o C0!Naurs (1) This valve must be stroked while AFPT is running and oil pressure is developed. O Stroke will be trom low speed stop to hip,h speed stop. U
*1 This va lve must be reset pr ior t o operation as indiented in Steo 7.3 o 7 A2 Tnis valve must be reset to assure Aux 17eed Punip operability.
PEltF0llHED BY REVIEWED BY DATE a N. ult lill11 AL DATE 7 ** Independent Verification Required. O O - . - . . .
VALVC DATA SitEET t0 2 ST '2071.01 REV 4 VALVt. VEftll'ICATION OF l.0SS OF VALVE yAtyt ACCEL'TANCC CRITERI A STit0EE L M,.OE
. VALVE CO g.3g g , TitAVEL 11Y STit0KE T!!!C POWElt itET' D t'It E-fll; TlHC t10ST ltC tJirilitt tJLf:113ER nl:o '
opritA_ TO OMIC tr.Stoght (PANEL) I'A R - I N!). l'OSITI Ota
- opgg.g . U ,;7gg OPI.tl CLOSE f!ON TI Al. l' Ult. ,
.l CIITS OTiltit !!!Gl07A ,
1t1107 (CY(17) tJA TJA IA NA <. 40 acc 7
- 11101071: 43 *2 f til O7A (CY/l?) flA NA NA flA 5 34 acc 11 ! O 7 9 )
}V/ so (Cy/8N) NA IJA NA NA FIA NA 6 46 mec til:13ful ,.
AF #fl gg)} NA NA ! NA NA _ NA NA d 44 nec I!!n31t'/1 A13671 (CY(06) NA flA fl4 i;A NA NA 6 33 nec y s.n ll!U3ft/2
, AF3U72 ( C'/(OIs) NA flA , NA NA NA NA g 34 eice Ills ICS 38A i NA l
(I) ICS 3fla (C5709) 1 NA 1 NA NA NA NA NA NA . ACCI:l'TArtCI: CIWi t..s A l I* s i
'llie Asiept. noe C T,,.rla isr eacl{ valve im the salve dsta aihr t liau I,een met Verftle i Date f ,
NJ fl01 C: All spacca next ,o v.nlve no. mn:;t lie filled with an initial or N/A (not applicatale)
- g g . un "3
,
- Li st in conwnents met i.od used in determining valve travel.
- C0tMElfrS (1) This va ve must be st roked while AFPT is running and oil pressure is developed. k & Stroke all be from low :; peed ; top to hi 'h l. sticed st op. F t71 *1 Thir, v.il v e i..Sti t lie reset prior to operation ar.- indicated in Step 7.3 o *2 This valve i ...s t be reset to assure nux Feed l'tuap operability. C PERFOldlED IlY 4 itEVIEUED BY DATE ,
flAi!E 1.itTIAL IuTE
- Independent verif .ation Required 7l ,
3 VAINC 11ATA 51'.CCf Nt) ftLV 3 - - , ST 5071.01 _ VAINE I VALyn ' ACCUI'! At4CC CitI1CRI A f __f.OSS lufttt Ol' KCT' D .,;(c.ggg
- I f V L1:ll'ICAT I O:1 0F T :Avgt g;y STROKE TittE 01'CRA.
l'O OlttC tLL t0;ttg y3tyg " " TIW ' EM COT 11:0L PitE- 01 Et3 VAINC ngg l ' JCLOSC S'JITCtl , S~*'l2I .l f TS J OTICR
- ttitCR 1]AL ; yt
- 1,L . Forvard Flow Observed NA *) 20:ll'L' l j NA
-f (1) )
NA NA
- NA !!A NA l NA flA l I Forward Flow Observed ALL I NA e l (2) 11A NA i NA , < NA 1 ; I HA j tlA ,
tiA NA , Forward Flow Observed AF19 j tlA j (3)I NA NA j NA j l NA j N f NA fi NA ,
!!A t NA I Forvurd Flow Observed -
m NA 4 i I (1) f NA f!A i AFIL l I I IIA
! l NA 3 NA ' NA l NA Forward Fla,w Observed ,
IIA i l NA NA IIA j
- Al15 * ,
NA (4)i l NA NA t I NA I NA j
)
j NA e NA i l J l'
!!S734 ( l I
f l I
)
- j I l '.
i f I l I I 8 j l t 8 l j j i j _ N Data Stad las l>jen rnet,tute j l ; N ~ ;MU3*rN!Cn duTEftIAe Criteria for each r Vcrifial v.nlve ce l tic vplve' u. 11c Acceptm
- l g
1 h an initial or N/A (not oppitcable) All stuces next to valve no. must be filled utt . ~ NOTP.: i i g valve travel. ]0, g , u Ch 5 Liat in coueents wettiod used in determ n n ion. CO:rEf.TS (1) Observation of of flow from flush linef low tud f rat e.1 on l'ul 26hfl.d ucal temperatter Ob r.c r v a t t on (2) Olu.c r vat i on of naa m.al be.n t n},,.in1, ()[ Succcu:.tul un'erutton on Aru rump 1 . _ CATE ltCVillCD fly
,,g ,,g g f4) ' ~
O I:AtlC 1.i!TtAL idTJ e e
C *e* i 4 VAINC !)ATA Slu:CT NO REV 3 ST $071.01 VALyr ACCE1"TAtlCC CRITLitI A h.OSS OF l V AINC ' J l@CR RET'D PRE-REQ VLKIF:CA110!! OF SUOG TIE ,TO 0111C (Estoutt l l ygtyg} ,TM
" T W EL 3Y Ol' ERA. -
CO:2 TROL pag. ' c IION l - OPLH ,CLOSE 4 VAINE 51J1'1011 I f( [S m in.R - (PA!;EL) .: gt te l (f . l FUI.L , (1)
~ l I HA Foruntd Flou Obe.crved r
J NA NA NA NA t1A i IIA '. f4A - Forward Flow Ohnerved AF2 ; NA I (2) NA NA I HA / i . f j tlA \ I NA i NA > I
' NA ' NA Fo ward Ffou Observed }
AF20 flA ] ' (3) NA J 'NA I NA } NA NA l u NA l NA 1 NA , Forward Finu Observed
~
AF12 l N A,,,, ,,, , 8 (1) NA NA NA I f I . NA tIA l NA l i [ NA ', 11A i , Forward Flow Observed e' AF16 } NA l (4) l NA llA 14A I i i j g ' UA ;
/ ' NA NA 1 l
i NA l , 11 A e 1 I ItS7 M I NA
- t f j I --
f y f i* , i I . I I Io l l, I
! J 3 j i l
Acu2 Im'E ditimtIM i hau l<en tret.1 - i l p tb valve data da$; Ibte I i , j y,
~ 1N tv:cetit up:e Criteria for c.ich v.i ve <Verifid! l a Ni applicabic) l
[ to valve no, mu:.t 1.c l'illed with an fattial or N/A (not " All 2. paces next W 11011:: valve travel. .O u conwent:. metho.1 u:.c t in eletermiulun
- 1.i s t in
- Cor;;1c:ars (1) Observat Observation of ion flowof f low f rom f lust. If neindic as e d on l'pt 2658.d 1. cal t rgrat ur es N (2)
(3) Obyervation of norm.il bearin[Lan1-2. DATE _(47 'oucccuulul ope ation of AlU l' ump REVIEUED 15y l'ERl'Okl1Cl> GY
~ ]
1.ilT I .'.L IdT.' tu:ri
28 - 1 A ~ ST 5071. 01. 5' 2 ' Auxiliary Feed Pu=p' Systems Waic ce: Ler Lf t ^- - C.- .4. Shifr _ Foreman Prict to I..c:n . c. . - :. ___.7._.... e , ,0 , ,s
. s. , ,
i . . . .
. . . . . . . . . . . . . . . . . . , ' . . . .- ~ * , .. ._.. i L__._.._._--
- l AN RECIRC TO l-1 CST AF50 CLOSED 3
AW RECIRD TO 1-2 CST hCLOSED'
- -l AF51- , _ _ . _ _ . ! AW RECIRC TO DRAIN l -
AF59 l OPEN OPEN AW SUCTION FROM l-1 CST , i CD167 , 5 ',---- --- j- - ct73Q30m ..
~
AFW SUCTION FROM 1-2 CST I t li CDl68 . i OPEN i i l MASTER SUCTION STOP FROM CST l l CD170 l OPEN 3 i l 1-1 A W PQf? SUCTION FROM CST
. i W786 i OPEN i i
L .. . . . _ _ _ . _ _ _ _ . . _ _ _ .
- I i i .
1-2 AW PmfP SUCTICN FRC:t CST ! ! FW790 l OPEN
!u.l-1 AW PU:2 SUCTION FRCM SW .?
SW3 , OPEN V ! I i 1-2 A W PUMP SUCTION FROM SW ; SW6 i OPEN t-..-.......... . _ . _ . l _ . . _ _ _ . . . _ l I l *
; l-1 AW PDT RECIRC STOP ;
i AF9 l OPEN i 1-1 A W PUMP RECIRC THROTTLE .
*' AF17 j OPEN ' . _. _ . __=
I e l 8 1-2 A W PC T RECIRC STOP j l AF10 i OPEN i i . I l-2 AW PCT RECIRC THROTTLE . i i AF18 l OPEN i ..- - - - . . ._ _. - l
! l-1 AW PCT TEST PICIRC l l AF21 '
l CLOSED. __ _. i
. 1-2 AW PDT TEST RECIRC i l AF22 i, CLOSED .n.----__- _ _ . ! l-1 AFW PUMP DISCH ! i AF360 l CLOSED- ,
i i I l
, 1-2 A W PUMP DISCH j AF388 , CLOSED !
I l-1 A W PC T TO l-2 OTSG ; i AF3869 ** CLOSED l -1 AW PC T TO l-1 OTSG i
- AF3370 ** ! CLOSED 5 ! i _ . - _ _._ . I - - _ _ _ . _ ,
I l-2 A W PDT TO l-1 OTSG i l i AF3871 ** ,- CLOSED I
! l-2 AW PDG TO 1-2 OTSC !
l AF3872 ** { CLOSED ,
;- _ _ , .____.7 i A W to 1-2 OTSC :
i AF599 i OPEN ' l.._ _ __._ i i .
;i AW to 1-1 OTSG l l AF608 } OPEN. ,
- AFP's may be lined up to' either CST. Either valve may be opened as long as the 5 oth.r is closed.
2239 158 -
29 ST 5071.01.3 2 . .. 2. _ . . . - . 2.. Auxiliary Feed Pu=p Systees "c r M 7 n . . un L ;'.:. C. W - C c . al'. , Shi f t Fore =an
? :- i - - : .s L . 31:.o 1.. . . . . . .. o i . . . . . . . . . . . . . . ... . . _ .. .. .. ..
_..'.:.-~~
. ' ~ ~ ' ' ' :.- *:---.
l_ _ _ .. __ --- - - . . . - - - .
! MS 106 *
- CLOSED 1.1 OTSG to 1-1 AW PUMP f
I i 1 I MS 106 A*
- CLOSED l
. _ -2 OTSG TO l-1 AFW PU12 l MS107 ** CLOSED '
i_. 1-2 _ . _OTSG. _ . _ _ _TO . _ .1-2 _ _ _ AW _ _ _ .PUMP ... _ . _ i ** i MS107A CLOSED , i 1_1 OTSG TO l-2 A W PCMP
. ___ _ . - - ._ .._ i ' i ' ! MS730 . OPEN l..._l-1 AFP TURB INLET ;
I l i 1-2 AFP TURB INLET g MS729 OPEN i l . . . _ l 1 ' AUX STEAM SUPPLY I l AS273- CLOSED l STEAM CROSSOVER MS733 CLOSED l STEAM CROSSOVER MS728 CLOSED h 8 AFPT l-1 CASING pgay3
. CRACKED MS_746 O P.~r"t_ . . . . _ .
t i CRACKED 1_ . AFFT_ l--2 _CASIN,G 3pg3 ' ifs 747 . O P EN . . _ . _ _ i . CPACKED _ AFP_T l-1 CASING D'qI?.{_ _ _ MS745 _,_,gygJ,__ ,_.,,___ C ?J.CK .D _.. AFF T 1- 2. _C. _A S.I.N.G. ._D__U.. _I.N. . _ MS744 OPE; i 1-2 OTSG Wet Layu.o._.Re_cire Inlet _ _ _ _ . . . _ . .a r 3 9.._ _ pt oSQ. _ _ . . I l-1 OTSG Wet Layup_Recire Inlet i ,J _Ay34 i e inqm __ i Locked Deaer. Stg. Tks. to AFP and SUFP , i FW 85 Close y _. _ . -_. j SW to AFP l-1 Iso Viv '! SW 1382** LIGHT LIT IS ~~
,LTCHT'IS' f
1 LIT
, _ , Sil_to AFP l-2 Iso Viv I SU 13_3)""
i i
** iThe Indicating Light on the Control Roc: Ssitch =ust also be LIT. ,
l . i . i , I CRACKED OPEN MEANS: Just o f f s e a t s_o._;.g.g- f,o e s --- " 11..up_wi-b < tea L shen .. .. . _ turbine starts. , , , l ACCEPTANCE CRITERIA 1 -
; .. 1. Each valve (=anual, power operated or autcratic) in the ficv path, that is not I locked, sealed, or othe:aise secured in oositAcn,.is_in.f,.ts_.cor:gc.c pcsition.
l Verified .Date 1 - 2239 159
ST 5071.01. 8 3 30 PACE 1 0F . PROCEDURE SIGNOFF . Date SHEETS Date Date 1 Verified Verified run. 2 .3 Verified (DOES, DOES NOT) ceed Date to be A Bearing Test , 4 Verified (DOES, DOES NOT) need Date to be run. A Valve Test Date 5.5 Verified PHASE 1 Date 5.6 Shift Foreman 6.1 Verified 6.1 1 Verified Verified 6.2 Verified 6.3 6.4 Verified 6.5 Verified 6.5.1 Verified 6.6 Verified Date 6.7.1 Verified 6.7.2 Verified 6.7.3 Verified o.7.4 Verified 6.8 Verified 6.9 Verified 6.9 1 Verified 6.10.1 Verified Verified 6.10.2 Verified 6.11 Verified 6.12 Verified 6.13 6.14 Verified 6.15 Verified 6.16 Verified 6 .17 verified 6.18 Verified 6.19 Verified 6.20 Verified 6.21 Verif ied Verified 66.22.2
. 22 . '. varified ,
6.23 Verified 6.24 Verified 6.25 Verified 6.26 Verified 6.27 Verified PHASE 2 7.1 Verified 7.2 Verified 7.3 Verified 7.4 Verified V 2239 1gg
~
31 ST 5071.01.7 PROCEDURE SIC:!CFF SHEETS PAGE 2 0F 3 - 8.1 Verified 8.2 Verified 8.3.1 Verified 8.3.2 Verified 8.3.3 Verified 8.3.4 Verified 8.4 Verified 8.5 Verified 8.6 Verified 8.7.1 Verified 8.7.2 Verified 8.7.3 Verified 8.8 Verified PHASE 4 9.1.1 Verified Date 9.1.2 Verified Date 9.1.3 verified __Date 9.2 Verified 9.3 Verified 9.4 Verified 9.5 Verified 9.6 Verified . 9.7 Verified 9.8 Verified 9.9 Verified 9.10 Verified 9.11 Verified 9.12 Verified 9.13 Verified 9.14 Verified 9.15 Verified 9.16 Verified 9.17.1 Verified ' - 9.17.2 Verified 9.13 Verified 9.19 Verified 9.20 Verified 9.21 Verified 9.22 Verified 9.23 Verified 9.24 Verified 9.25 Verified 9.26 Verified 9.27 Verified 9.23 Verified 9.29.1 Verified 9.29.2 Verified 9.30 Verified g 9.31 Verified 2239 161 9.32 Verified (buy / 9.33 verified 9.34 Verified 7
*
- f~ ~
c- ois RieUtton f,gg c......R.....,.........u.,,..
, , s = . m.4 '-- - vu.C..,.v.m ,ra.
Q - CCPIES TO BE MODIFIED PCR iMut01 ATE iMPLEM ENTATION DAVIS.BESSE NUCLEAR POWER STATION UNIT 1 TEMPORARY MODIFICATION REQUEST , E . E, . c
/
SECTION 1 PROCEDURE TITLE ANO NUMSER 5 Y5 n R o . o &- RE ASON F OR CH ANGE WP 5 mwwt v '73TT
/
fpacTiow.9L 7tS7~ OF 99-/'20 y b h Fcf .___ s cs _i_y _. _ . wcn rRM v M,_l_ S 0 M ' q t.A H ! IiI F, D *,D $ WHS. U _I i ! g '
]D ,
I' b.b CRo I i '
- RES 'y_ I TJ M. i l i I I SCJ ' I i I CHANGE HLO I I ' I Q ASO ' _i_
g est A 7T.A CHe .n-;-R ___ sJKW o_m ^ ' I 1 SEL FSM l_l_I_I l j . TEH , i , w fr"ThVM & kK~f~,n,Y: City'.i -; : M Tk 'TWMi i l i I TKR . I l l RCHI * ' l ' MA[ ' 2239 162 "~6, l0 1, I
- i IS PROCEDURE REVISION REQUIREO fy g cg g y
'""^"' "c #;%/_ , ^% & ' # # / OATE APPROVED Sy diEb,.cabjl0m.usu,_ '
c l2 7l99 APPROVED SY
) / [ i DATE / \ /YdvYA A , 4 1 / //
susuiTTEo av is.c,~i- '
~.) oATE
[ v / fik WJ - El 199 RECao oENeco e <sA w ,..;..,r - ~- o.TE / .
- b. a. R L%.+ y.gsp/n GP GI % /
\ )%
cAA,.RovEo.,io. ..,c ..n,A.....,ul OATE
/
A ,, R c v E o . , i s .. .... .. ....-,.~. ,, --- , oATE
=- --
%/ TEST PRCCEDURE FOR THE CO:! TROL GRADE AITTICIPATORY REACTOR TRIP SYSTE'1 FCR 79-176
- 1. PUPPOSE .
The purpose of this procedure is' to functionally test the Control Grade Anticipatory Reactor Trip System (ARTS) FCR 79-176. This tect will also show that there is no degrading of the SFRCS. ST 5030.12, Channel Functional Test of Ex Trip !!cdule logic and CRD Trip Breaker
'and ST 5030.13 Channel Functional Test of Manual Rx Trip will be perfor=ed also to show there is no degradation to the PSS trip function.
- 2. PRECAUTIOiS & LIlf1TATICliS 2.1 During Phase II the SFRCS will be placed in the half trip condition on Channel 2/4.
2.2 Do :ioT exceed the limit of electrically tripping the Reactor Trip Breakers r. ore than once per half hour.
- 3. PREREQUISITES
%s 3.1 The station is in Mode 4 or Mode 5'.
- Verified Date -
3.2 The SFRCS is energized and all applicable lanps are "0!i" for present plant conditions. Phase II only.
. Verified Date 3.3 Circuit 33 in Y3602 has been energi:ed.
Verified Date 3.4 MS 375 is closed. Phase II only. Verified Date 3.5 SP 7A is closed. Phase II only. Verified Date 3.6 MS 100-1 is closed. Phase II only. Verified Date v 22,39 163
e y 3.7 ICS 11A is c1'osed. Phase II only. Verified Date 3.8 The EHC has been si=ulated to the point that it can be reset. Phase III only.
, Verified Dade 3.9 The AC Supply to the CRD has been disconnected in the CRD cabinets for all SCR Croups.
Verified Date 3.10 The Breakers to the CRD systen are capable of being reset. Verified Date 3.11 Verify that both Blower A and Blower B in the Ifotor Return Cabinet are operating. Blower A Verified Date v Blower B Verified Date 3.12 Shif t Fore =an has given permission to run this test. ~ Shift Fore =an Ti=e Verified. - Date
- 4. PROCEDURE The procedure is divided into three (3) phases: I Phase I - Testing of the Test Pushbuttons located in C5741, C5742, C5743, and C5744.
PhaseII - Testing of the Differential Pressure Switches (Loss of Feedwater) Phase III-Testing of the Turbine Trip 4.1 Phase I ? 4.1.1 Place the T/G Block Switch HS NI51 in the "BLCCK" position. Verify Q779 status is " BLOCK". Verified Date V 2,239 164
y 4.1.2 Reset "A", "B", "C" and "0" Breakers. Verify cocputer/ annunciator point Q777 is not ' alarmed. Verified Date
- 4.1.3 In C5741, cc=entarily depress HS NI47 and verify "B" Breaker trips and cocputer/ annunciator point Q777 alar =s. , Verified Date 4.1.4 Reset B Breakers. Verify co=puter/ annunciator point Q777 clears.
Verified D' ate 4.1.5 In C5742, momentarily depress HS NI48. Verify "A" 3reaker I trips and computer / annunciator point Q777 alar =s. Verified Date 4.1.6 Reset "A" Breaker. Verify co :puter/ annunciator point Q777 clears. Verified Date 4.1.7 In C5743, momentarily depress HS NI49'. Verify "D" and "B" v Breakers trip and computer / annunciator point Q777 alarms. , Verified Date 4.1.8 Reset "D" and "B" Breakers. Verify computer / annunciator point Q777 clears. , Verified Date 4.1.9 In C5744, mo=entarily depress HS NI5O. Verify "C" cnd "A"I* Breakers trip and co=puter/ annunciator point 0777 alares. Verified Date 4.1.10 Reset "C" and "A" Breakers. Verify computer / annunciator point Q777 clears. Verified Date
~
4.2 Phase II 4.2.1 Verify HS NI51 is in the " BLOCK" position, Q779 status is
" BLOCK" and co=puter/ annunciator points Q778, Q777 are NOT alarmed.
Verified Date %/ 2239 165
%/
4.2.2. Valve out and equalize PDIS 26853. Vent the lov leg to at=csphere and connect a water test pu=p and test gauge to the high icg. Cicse the equalizing valve. Verified Date 4.2.3 Slowly increase the teot pressure to approx 1=ately 200 paid. Verify a dP trip in Channel 4 STRCS, P702 alar =s and the CRD breakers did NOT trip. Verified Date 4.2.4 Decrease the test pressure to O psid. Verify the SFRCS dP trip resets and P702 clears. . Verified Date 4.2.5 Valve out and equalize PDIS 2686D. Vent the lov leg to at=osphere and connect a water test pu=p and test gauge to the high leg. Close the equalizing valve. Verified Date 4.2.6 Slowly increase the test pressure gauge to apprcxf=stely V 200 psid. Verify a dP trip in Chanr.el 4 STRCS, P701 alar =s' and the CRD breakers did NOT trip. - Verified Date 4.2.7 Again increase the test pressure on PDIS 26853 to apprcxitately 200 paid. Verify computer / annunciator point Q777 is in alarm, and all CRD breakers are tripped. . 7 Verified __Date 4.2.8 Decrease the test pressure in PDIS 26853 and PDIS 2686D to O psid. Valve both.PDIS's back into service. Verify the dP trip in SFRCS Channel 4 has cleared and P701 and P702 have cicarod. Verified Date 4.2.9 Reset "A", "3", "C" and "D" Breakers . Verify computer /annun-ciator point Q777 clears. Verified Date 2239 166
y 4.2.10 Independently verify that PDIS 2685B has been returned to ser/ ice. Independently Verified Date 4.2.11 Independently verify that PDIS 2686D has been returned to ser/ ice. . Indepeddently Verified Date 4.3 Phase III 4.3.1 Reset the turbine. Verified Date 4.3.2 Verify CRD Breakers "A", "B", "C" and "D" are reset. Verified Date 4.3.3 Verify HS NI51 is in the "BLCCK" position, Q779 status is
" BLOCK", and conputer/ annunciator points Q778, Q777 ara y NOT alarned. ,
Verified Date 4.3.4 Trip the turbine and verify that CRD Breakers "A", "B",
"C" and "D" DO, NCrr trip.
Verified Date 4.3.5 Reset the turbine. Verified Date 4.3.6 Remove the 15% block by using ES-NI51. Verify Q779 status is NOT blocked. Verified Date 4.3.7 Trip the turbine. Verify all CRD breakers have tripped and conputer/ annunciator point Q777 is in alarm. Verified Da'te 4.3.8 Place US NI51 in the "3 LOCK" position. Verify Q779 status is " BLOCK" and conputer/ annunciator point Q777 is g alar =ed. Verified Date v 9 2239 167
y 4.3.9 Si=ulate greater than 15% power in the cc=puter. Verify computer / annunciator point Q778 alar =s. Verified Date 4.3.10 Re=ove the "BLCCK" using ES NI51. Verify computer /annun-ciator point Q778 clears.
, Verified Date:
4.3.11 Place HS NI51 in the block position. Verified Date 4.4 Connect the AC Supply in the CRD cabinets to the CRD for all SCR Groups. Verified Date , 4.5 Perform ST 5030.12 on all four (4) RPS Channels. Date completed Verified _ Date
4.6 Perfor
ST 5030.13. V Date completed Verified Date *
- 5. ACCEPTANCE CRITERLA 5.1 The " Test" pushbuttons for the ART 8 operated as designed per
- Phase I.
Verified Date ? 5.2 The Loss of Feedvater Differential Pressure Switch circuit cperated as designed per Phase II. Verified Date 5.3 The Turbine Trip circuit and the " Block" function operated as designed per Phase III. Verified Date 2239 168 om v 9
OlST R 18 U TI O's
;'.. Otisanal, Responsitale Section Head Actiott
_ Pile Copy. Master File V. COPIES TO 8E MODIPIED POR .MMEDI ATE IMPLEMENTATION DAVIS-BESSE NUCLEAR POWER STATION . UNIT 1 / gj,// /6 ,.- Gj y ' 4 t.4c re. C f,,ir TEMPORARY MODIFICATION REQUEST EO 6929
/ c.,,/n/ 4.,,,,
2 *(e., tec j foe, q,j ,[ f ja SECTION 1 PROCECURE TITLE ANO NUMSWR RPS P101/ TWL Y ' S T* C 0 3 0. D 2 RE ASON POR CH ANGE 0Ol455O l$ C $ lll hll . DCl6"$ $ $A? ?"'I"?, $$4 h l" C h. ($ '5f
- il0 u n. h t;;e:Lt ro z 2u.v ::.;; g;; e , s.i. y , a . , ,z n o e 2 29Ce4 = 71STV00 C (+A lt C.R STEP (,./0 2. TOAm ^S ' MM bet. 0 W A
ll_ ] INIT CATE eCn t JES I l WC R_ h4 l LR]LIII Ll l CHANGE - w STCP 6./0.2 ro ( rans awtatc sa v uo Oli &CRD$5GV0'o rSC' ' i , l
- 0 0 3 5' st o s no w e artniCS Pw a S n AW R CS I4 t W 'EkGU'Ref ' N f f* *~ /*
{ TJ M '- l l ' OF L 2 9c.1 t 0.c 0 - 2. 8 0 PS /C . N ort ri+ng_t i S iq Hl.O . i i l b CC 01 O%MC2 u.to 714 r.S 2. 2 -l AS THG Tits P Sor r MWT IL 2 2130u c SI C-JHC , bid r t< E A L. L. C W O L.G *)A s. J c S $ z3 of psi ckM . _ BB . l , . J K,W e 3 , S El. . . i i l P'9M l il g y- (.B ([ "#3 ; t, EH I I _ w w l O ~ k - AST # . IS PROCEDURE REVISION REQUIRED TWM' : Y es l No if no, tnis rnod;ficadort i y f ttuntW- - PREPARED 8Y i>A@ . / . b d 0 u 5 i Ar 0 M A7__' h 7 YY
"" " Q [ Q 3 _l '~ ~ %,gfj',9 Q!
dWK [l ,Y= ?f APPROVED BY . - j
/ ntwsv s_ $y ~
SU8MITTED SY (S DATE - G RECOMMENCEO SY (SRS ChMan) OATE QA APPROVED SY (Manager of C AWW # kssurancel [ O AT 6[/r/[79
/ / # #d OATE A PROV E D BY L$tation SwDerintencent) nw , ano?
7(" 2239 169
a e
- OISTRIBUTION 8 h Original, Responsible Section Head Action File Cooy, Master Film COPIES TO BE MOOlFIED FOR IMMEDI ATE IMPLEMENTATION 1 AVIS-BESSE NUCLEAR POWER STATION UNIT 1 IEMPORARY MODIFICATION REQUEST ~ ~J. % .. - ---
ED 6926 b SECTION 1 ! l PROCEDURE TITLE AND NUMBER { ( # s ) i, [ , *g [,'.,t g } ,
$ Y .S 0 3 0 . {\ Z ff.$ e)?f / '
F1 C /0M '" ' RE ASON FOR CHANGE h fffMjf 0ftai'f //0Y* 9 l*l3 YlO/l E VS.* l* Gr:y C. Y O!!! '!IY . 0lY S f if}!j7 / fa blC (O kha h f/71f /19O /k C/?C* j'fpf t*thfg* fpy ( g (g* kfppye Jse1 do <::* ucde/t sit fde sorver//en fc t'es6 fo r ris Er.<>ra.f'e,-r 7)s: p,// ; /ar7pirra N i'J /' l V 5 i C /1 0 '*"l' j '~Y Y'M C crestdifrct:s ,,'/t*C i Y '-
- h. tY/Nf fk/3 d f. 3of &sc} d'. 9 0l 7~- 3 '/'d$~ f' S e/ tw// f** l'
(deln .eus do z% eurn + p e rious a &s
& Ylt'f *kt'/1rj'co *:.. y shC S t-j 'f / S <*' C '7'~- Jf'T CHANGE $ g* g* G Atbt OCf i f.$ .-
e%lf 'f'< t' $ /fst 8 Osf G , 29 ., l } j A
, l I l l\
i 't l , i l (
~f +j
_.I ' i ! l' f ., ', f .l l ] ~ ., ~ ~' e r ..; 1 , ; {i .. I I lh! j ; , , g l l . o A fhk* ...,'$N Ob 0052 l ,y _[
~~**'*>*w.d.,,*,',,b-y e
i? IS PROCEDURE REVISION REQUIRED ! < // '[ I'" , ' :/ Yes No / if no, this modification is valid until s# 2 '.- ' ' - PREPARED BY DATE APPROVED BY LA A' N.u/- / DATE 2-&-77
/
r u **<. r S t.o t* 9 APPROVED SY DATE / SUBMITTE D BY (Sed,4f m ('3c ^
/.
OATE // dhp #
- f. f ?!~/
4ECOMMENCE-O BY (SRB Churmin) DATE [ /
'l jh 9 f //3 ))
QA APPROVED BY (Manager of Quality Assurance) OATE
,1 ' / / .e /'ff=* ' # ( [.) ,*. T .~ 'a'"Q V'*D 0Y .i.t. m i.4,rmt.'s- "si y,
,n f' -. . . . . . - . . .
-~~~f G A'~~. -- - = s m ...t-;-.--. .- ,)..= - . . _ . . . . . = - - . - .
l ~, l / > ! "/ ,, 2239 170
e h I 2 SECTION I l MEN TS COM 3 SECTION FSAR. i cribed n the W cility as des R REviE i the FS A . SA FETY R cha n ge in the f a r res as desc ibed n NS he procedu R faFCR. No@ n i he FSA . thisis part o Y es O NSR cha ge in t described n t ed,u nless u witho t ent not be made No G experim shallbe perform cannot atio ns. n t he cha nge NS R test or a Y es O hnical Specific V Safety Evalu tio No Q nI his is "Y es", Cha n gein theTec ** e sectio Plan if t Yes C n til are "Y es , lSecur ity No @ l Y es C above Sectioif applicab e). e ness of ht eindustria 4 nt t-if any of the No. h effectiv atimpo rta (FCR e in trren e c. e SECTION me NOTE: Os creas ncu n of equir NRC co nctio No @ maifu he Safet* nt or usly in t e Y es C of aaaccidereas d. y be inc aluated previo eaces any ev c onisau r r tne alyses Repo re t nma t ty pe t ahn e UATION of occurrenceo he Saf ety An n of a diffe reduc d. without e Y EV AL toi n is SA FET ab iittv i nctio be made The proo evaluated n nt r malfu Technlist Specl*!ca sl cannot pr eviou y ccide t o es for any change No O for an a as nd the created. h l ed a i Yes O A possibilityReport s defined may be nQu estio t e nb "isinvo v No O of safety a Safety FOR AO mar gin w ed MITTED Yes O The **Unrevie l SUS n if applicab e) 5 MUST SE No C V is "Y es, e SECTION OlFIC ATION nI Y es C ANo. MO If en y of Sectiorrence. (F C concu RES,A TEMPORARY NOT E: U OCED OF PR ONS n submitted COITI OR A ICA BLE. Modificatio ETtONS PPL mporar y DEL1833.00,lF A Te n submitted LUATI-FOR 1805.02 EV A OR AD AO r Modificatio 6 GSAFETY Tempora y No G SECTION RE QUIRIN Y es O AO 1838.00 TIONS OtFICA No C ND MO TIONS, A Yes O MOOlFIC A S, NSR Date ETION NS,OEL DITIO FOR AD NSRCHANGES. nts:. 7 DATE t mme SECTION SRf1 'a n Reco mme ndatio : SAS TEN CENT APPROVAL ST A TION SU PERIN 39 m m. .. .. . : ON: m% c: it .. _._ CISIBISt/TI u.s
V df $d S &np<rs tLie I n s tec. m m t. (a L w ns,r.l s o n \ [ s 9/. Cont 7t l the Dvm 2o H e. -/n " 6. .s 4 g c.e l< e n d1e riir airef ieceed 5 M i<> </ e<k . C rL D m
% ola inel.eaie_ ~ so. oo 6 /c.'ci oac'.) If noW w i4c.i,,
to leier..e c , p e r fc>r m n < E ess c ' ~) b er el. c%I. b c.M e P#e 6 c ; i .- % L>el & sfrue &cs /7hsas.l
?
Au leva d v o c. Oa i: e nd cu n. s<aku oa ;:a.e G< mal T 4 s/no As left - voc C 9 z. Ocrnect t4<. D o rn &c tl.e "Ex ?c7 6es f f c,.c{u o n kl e-Te er,pe.cs f. ore. G gncJ. ec,w e, k e (mbile
&(;a9 b n b-Q .n ard. r 6, te-;t t L.e.
G.9 3 ?ctr"ccm che fa llcwin 5 s6ees ' lirico.ru 6'y af the Am<ar 3<,afe o. s ci e / tA c- inc n es. ben =
& s 1 o e ic le f a> i ( Y d < ri;p e t o f ,r e. = <r, 's,3
- i. A%~ 76,1, e e. ,. ac /+you,,,3 es,,p &< ,n..t 4 S *,Cett. Ch 4.'i ff Eb c: 5,"~.5 _ (! A cas7ne /
/ "?) . 7' : S d'sf 0 b 1 ** f7:/ T 7 .'. / /
Ver,fr.eid ID fe. -
.7. s.. ua c.J H.e . tric fer L u ' e c. la c , a _.
T mp .,c.6<, S 7 . C ; - u r f ,< ( 4 1 us ,, ss m W ' Ya m p pc& bson \/c 1. [~s e. E , Ye _ oisu nc + c.4 ccWsJivorn t e in m a is c ,-z e, a ,,a v p a . - 0 $ Oe Terar!4 !.Sec:i.sl /'^('c NCf a / /cyenir /- / -/c -y'
" w, .cer./ - .z ( c _ . JL oj . J] A m ' ' l u - , , , , . ,. m .,. <. ,, ,
l- 'l, a .,i, ,, . , . . < r- t! . , l (i. 2239 172
. s 6, re , , , ,,J, e c.~,J 7 us,h h / 4.. c M 3.Y ha< Bo 5 Nre[e[ c be
- f. hac! 4. (*e si s [4 nee of a'/0/.72 m/L. on I/c de. c.f r (3 e x Gnd recerA &Le Dvm rea i...y. T L r ' c u d.n3 s L aula L e 0 Cco ec ? o. Occ3f v od.
D V YM v oC uwMi3 - cn Y. h t Secde 50 %
. _ . . . f. . ht& l C (* s a bA nte- o f Al T . / b~ J'L-c.rd r e ce e d. 6be D vm reds'ng . 'Ils /dg 51..vlO k s 00500 : C. C003.T V OC.
Dvm Q ensiix, voa ea e f.e. Dee A h 7 D a.I c c.c, 6.n,.e o f 2.t c . 2. 9 n_ 6-h k f e c.c rd. b k c. D V T/l rec 8. sng , 7'A e (cwdartg S Aci;r/cb b e C. tco co Z o.>co E voc.. Vyn k E 60 lu te - v.3 C-
- e. Co met cAa Dvm to & r mp cs hut &sf g c.ek.n
% de.qu6.a = q. na i ecn <cr 6-r md v le . Eewa tl.s.
cenhy. bvin bvm SetAn n y ' voe CJn A L &4 k44eam; *. X
- C Dvm <<<2,og c f +.9 3 7) s ( ice-)
K (. _) x (-/co) = vo c_. x s un -p.I m % cc l.ny ce c.7.s e = c. c i= -o c_ w,;,4 Lt c _ 7 D'v.\ c. Ca. : o druv..e of 'Z t s , i s x e .n %e J'?. c.c, C . v ik c..,A ,c o.,. . < t L.< d v <. . .s o I . 3 D"* *D 3' pa n v ,,, acn em o : 17 aW w W .d... ;2 c.t. e c,n a .-: 2239 173
U (. 9 3. f Xs /. 0 vr4 peu&,, o f- c .9. 3 6 ) x (- r e ) K= c_ T * ( - < ccd = vc e. X s Levia .egoc. l f Le Ovm < col s, g o /' c . 9. s. 9 .1 no <s see v'eI.f'cD bu+c . co. 9 3. to D id c. rasshe,ee o f so Y. 92 _n os de b ee-.h Sox c.n i. cc.ee ca etc D e ceuh'6 _ _ . . . . . . . D 1/ rn. Reading _ vo c. Oc lev We t h fe Howinb '- X =- ( Dvin < ca hy o f 6 9 3. s') &ic o ) X - ( ') = (-eco) = _ vec Y % [cv]l\ ? goo l the D vtro recAs.1y C f 4.9 Lto t c.cin oc. L/4 <s Es.ed da Ye V c . <> . 2.11 D,seco,,eek tlse b e cake. a e s c nd. i e eo n n ed cl.e Icals J , ce nn echef in s Ecp 4 2 s. .s
- . . . - . v'a . n ce l . bdc.
O s vene. & S o , v el //< nee T,_ t ta r s.e c r se s G . 9. V 4 h0 /
~
, ., .n ST 5030.02 Devis-Dess e: S c'icar Po'cer Statica *~. w. . . . , _ , , , , , , _ __ l ' '-lf ii: 6nt Unit 50, 1 ' ' '2 " l l l grj - -~ v: , j W.;.t I ' -~-l Survef.11ance Test ST 5030.02 , u,., . ,' -,-- l RPS Monthly Functional Test nvu . , / uso l , ; f [/ ' , -- li '- was; l i ~ ,,
~~ - '"i(E'd E i E/ 'E c m !,f. ,' [, - ;3 . - _ _ . ,u , , ~ ~
7 f> " i t~ ~ ' ~ MI\Y 3 i 1979 sc; i ; ~,----,--
,C )) D ][ {.j"l ,.Q ~
POWER ENG. l I
.iUULUli! O!!ilbl ill.Ui!LL ~ _
s , ao , , aw; ",- ,
" ! ' '~ ~
Record of Approval and Changes S C L-
,. s g l !l -
n:,i , _; j - - i ---- Prepared by Terry Hu=phreys e c '_. ... 5/6/77 - ;
, ) l -- Data l
Subnittcd by ' -,rw C. $ (h /b/)h "'I r fld/j 7 $ U Scenica .ic.ad ,sh-f-, Date Recot= ended by /_ h ,O b h m [, - N/C [~/ ~J "SRS Chairuan J ' cua c j.g ; ,
,Date i ' ~
QA Approved -- _ Aic-" '~~ l
~ r ---- ;.,r 4 Quclit7 A=suranca Date Approved by_ [/ M..Station /* ~
_N Superintendtnt e Date poorg 9 g Tl - 5 S.b- 3 Revision SP2 QA Sta, Sept. No. Reco:cecdation Date Approved Data' Appofe4 Dcte. O f'
' ~
g N7 M -
) ,,1997 f/77 iU/? - ~ S P/9/77 3 y sep/77 ,()J ' J W/w ' !' "
4 Yor % 7 /nt7e n @- An~-~0 7luio & O f~ (, sfd8& gfM9f $3/7f V"/??
}l$' *&
W 'bl. d lN Please Returu Previous Revision to the Davis 4 Besse Ot!!ce Supervi:cr, Stop 2103 2239 175
4
'. n 1 ST 5030.02.4
- 1. OBJECTTVE (TS) 1.1 on-line testing of the Reactor Protection System protection chan-nels is required conthly'and will be performed on a weekly rota-tional basis.
1.2 To verify that the functional performance and accuracy of the RPS channel being tested through the use of the channel test modules and codule indications. This test is also used to satisfy TS 4.3.3.6 for RC loop outlet tem-1.3 (73) Perature and RPS status, monthly channel check. 4
- 2. REFERENCES 4 (TS) 2.1 Technical Specifications - Sections 2.2.1, 4.3.1.1.1 and 3/4 3.3.6 2.2 Davis-Besse Unit 1, FSAR Section 7.0 2.3 Station Limits and Precautions, PP 1101.01, Beactor Core, Section 1.1 2.4 Station Setpoints, PP 1101.02, Reactor Protection System, Section 6.1 2.5 Bailey Meter Co. Drawings 2.5.1 Analog Logic Drawing, Nuclear Instrumentation System, gep/ E8047534 2.5.2 880 Nuclear Instrumentation and Protection System Digital Logic, D8047535, 36, and 37 2.5.3 External Connection Diagrams, Nuclear Instrumentation and Protection System, D8047538, 39, 40, 41, 42, 43, 44, 45, and 46 2.5.4 880 System Cabinet Layout, D SO47547, 48, 49, 50, 51, 52, 53 and 54 2.5.5. Legend and Drawing Reference, Nuclear Instrumentation Reactor Protection System, D8047555 2.5.6 Sche =atic Diagrams, Reactor Protection System Channel 2 (Subasse=bly A), D8047556, 57, 58, 59, 60, 61, 62, 63, 64 and 65 2.5.7 Schematic Diagrams, Reactor Protection System Char.nel 1 (Subassembly 3), D8047566, 67, 68, 69, 70, 71, 72, 73, 74 and 75 2.5.8 Schematic Diagrams, Reactor Protection System Channel 4 (Subasse=bly C) , D8007576, 77, 73, 79, 80, 81, 82, 83,
\g,/ 84 and 85 2239 176
2 ST 5030.02.3 D 2.5.9 Schematic Diagrams, Reactor Protection System, Channel 3, (Subassembly D), D8047536, 87, 88, 89, 90, 91, 92, 93, 94, 95.and 96 3. 2.5.10 Cabinet Door Open Logic, Nuclear Instrumentation Reactor Protection System, DSO47597 2.5.11 Schematic Diagram, Auctioneered Average Power, D8047559 2.5.12 RPS Equipment List, Bailey Meter Ccmpany, Davis-Besse Drawing File 1355 2.6 RPS Technical Manual (Bailey Meter Co.)
- 3. REOUIRED ECUIPMENT 3.1 Digital Volt =eter (DVM) readable to 0.0001 volts with an input impedance of at least 100 cegohms and accuracy of 0.01". or better.
Equipment No. 3.2 The RPS cabinet keys and the RPS channel bypass key must be obtained from the Shift Foreman. Verified Date ( ,j 4 PRECAUTIONS AND LIMITATIONS 4.1 For on-line testing, the key operated " CHANNEL BYPASS" switch, associated with the RPS channel being tested, shall be used to codify the respective logic to a two (2) out of three (3) code. 4.2 "0N TEST" lamp on test circuits should be DIM in the "0PERATE" position. In all other positions, the "0N TEST" la=p should be BRIGHT. All other lamp indications are DIM for NCRMAL and SRIGHT for TRIPPED or AB"0RMAL (except the la=ps on the Contain=ent Pressure Buff er Amp which are OUT for normal, ON for abnor=al) . 3 4.3 The test selector switch has a cechanical stop between the " TEST OPERATE" position and the "0PERATE" position. To cove the switch out of the " TEST OPERATE" position into the "0PERATE" position, it is necessary to push the knob and hold it while turning CCW. It is not necessary to push the knob when switching between any other positions. 4.4 Before testing any codule in the RPS, it should be energized for at least 30 minutes. 4.5 RPS location for all codules is given as follows: (loc. 1-2-3) 3 1.e. the location is cabinet number ~., row number 2, codule ( j location 3 (location is identified f::om lef t to right). 2239 177
~
3 ST 5030.02.3 4.6 RPS codule locations are posted inside the channel cabinet doors. [M 4.7 If this procedure is run at a power level < 107. full power, the testing of the Intermediate Range Channels will result in a
=ocentary SUR Rod Withdrawal Inhibit.
4.8 All bistables have two lamps on their face: " OUTPUT FEMORY" and
" OUTPUT STATE". The "CUTPUT STATE" lamp is bright when the bista-ble is in the tripped state. The " OUTPUT MEMORY" la=p is bright when the bistable is or has been in the tripped state. The following occurs when a bistable trips and cust be reset.
4.8.1 Trip Bistable (one that provides a reactor trip function)
- 1. When the input parameter reaches setpoint, the trip bistable trips. Both the " OUTPUT }EMORY" and " CUT-PUT STATE" la=ps go from dim to bright.
- 2. When the input paraceter no longer exceeds the set-point, the " OUTPUT >EMORY" and " OUTPUT STATE" lamps re=ain BRIGHI,
- 3. The trip bistable may now be reset by depressing the "0LTIPUT STATE" reset toggle. The " OUTPUT STATE" lamp will go DIM.
- 4. The "0 M PUI MEMORY" lamp is reset by depressing the "OUIPUT >IMORY" reset toggle. The "CUTPlTr MEMORY" lacp will go DIM.
4.8.2 Bistables providing protective functions other than trip-ping the Reactor Trip Podule.
- 1. When the input parameter reaches setpoint, the bista-ble trips and both the " OUTPUT !EMORY" and " OUTPUT STATE" la=ps go from DIM to ERIGHT.
- 2. When the input parameter reaches the reset setpoint, the " OUTPUT STATE" lamp will go DIM.
- 3. The " OUTPUT >EMORY" lamp is reset by depressing the OUTPUT >EMORY" reset toggle. The "OUTPLII >$MORY" la=p will go DEM.
S. PREREOUISITES 5.1 Check computer points R799 and R808 m determine which RPS Power Averager the ICS is accepting for control. The averager with the highest value will be used for ICS control. If the ICS is con-trolling frcm the averager associated by the channel being tested, notify the operator there may be a bump when the PRIti is in " TEST OPERATE". This prercquisite is not applicable if power is in the source range. Verified Date 2239 178
s 4 ST 5030.02.4 S.2 The Reactor Protection System must be in operation. Verified Date 5.3 Obtain Shift Foreman's permission and log the start and stop times of the test in the Control Room Log. Start Ti=e Verified Date NOTES: 1. This procedure is written to incorporate all four (4) channels. Perform only the appropriate steps for the channel being tested.
- 2. Throughout this procedure, various steps have voltage and parameters indicated. The only reading required is that which is indicated below the step.
- 3. A computer point which reads SSSS at zero (0) and one 4 hundred (100) percent, but reads correctly at all other inputs is not a deficiency.
v e-2239 179 - lb :.
i
~
5 ST 5030.02. 6
- 6. PROCEDURE Circle channel being tested 1 2 3 4 6.1 open the cabinet doors of the channel being tested. Verify that the annunciator window in Control Roo: "RPS, SFAS or SFRCS Cabinet Door Open" and computer point ZS40 are alar =ed.
Verified Date 6.2 Place the channel being tested in a " Channel Bypass" condition by use of the key operated " Manual Bypass" switch located on the REACTOR TRIP MODULE. Verify annunciator window alar =s. RPS CH 1 BYPASSED & 2/3 MODE ' RPS CH 2 BYPASSED & 2/3 MODE (check appropriate space) RPS CH 3 BYPASSED & 2/3 MODE RPS CH 4 BYPASSED & 2/3 MODE Verified Date Also verify co=puter point below is alar =ed. Q809 Ch 1 Q817 Ch 2 (check appropriate space) Q825 Ch 3 QS33 Ch 4 Verified Date 6.3 Connect DVM to " OUTPUT" test jack on the +15 volt Syste= Power Supply. Record reading below. The DVM should indicate +15.000 + 6 0.010 VDC. If the voltage is out of tolerance adjust the output , pot on the front of the power supply until it is within tolerance. Also, record ac=eter indication. DVM (as found) VDC Was adjust =ent perfor=ed? yes / no DVM (as lef t) VDC Installed volt =eter reading VDC Installed ac=eter reading _a=ps verified Date 6.4 Repeat Step 6.3 for the -15 volt syste= power supply. Q DVM (as found) VDC 2239 180
6 ST 5030.02.3 Was adjustment performed? yes / no DVM (as lef t) DVM Installed voltmeter reading VDC Installed a==eter reading amps Verified Date
. 6.5 Intermediate Range (channel 3 (NI4), channel 4 (NI3))
Verify 0:E of the following conditions is met: IF REACTOR PGER IS > 157. FP ON ALL POWER RANGE CHANNELS , INFOMI THE SHIFT FCREMAN AND CONTROL ROOM OPERATCR THAT I: ITER!EDIATE RANGE TESTING IS IN PROGRESS AND PRIOR TO A PCf4ER DECREASE BELOW 127. FP THE I:TIERIEDIATE RANCE CHAN:EL U::CER TEST MUST BE RETUR:ED TO SERVICE TO PREVENT E:ERGIZATION OF BOTH SOURCE RANGE CHANNELS. Tice Verified Date OR . V IF REACTCR POWER IS <.157. FP ON ANY POER RANGE CHANNEL BlTr ABOVE 4 x 10-9 AMPS ON BOTH I:iTEMEDIATE RANGES, DO NOT TEST EITHER INTEMEDIATE RA:;GE CHANNEL. PROCEED WITH OTHER RPS TESTING. Time Verified Date OR IF REACTOR PGER IS BELOR 5 x 10-10 amps ON BOTH INTERIEDIATE RANGES A:iD BOIH SOURCE RANGES ARE ENERGIZED, INFORI THE SHIFT FOREMAN AND CONTROL ROOM OPERATCR THAT INTER 1EDIATE RANGE TESTING IS IN PROGRESS AMD THAT PGER LEVEL CAN';0T BE RAISED ABOVE 5 x 10-10 amps. PRIOR TO RAISING PCUER LEVEL ABOVE 5 x 10-10 a=ps THE I! TIER!EDIATE RANGE CHANNEL UNDER TEST MUST BE RETURNED TO SERVICE. Time Verified Date 6.5.1 Place the IRTM Test Selector in the TEST /0PERATE position. The CN TEST lamp should go from DIM to BRIGHT. Ch. 4, MI-3 Verified Date Ch. 3, NI-4 Verified Date y 2239 181
n ld .
.i .
7 ST 5030.02 6 6.5.2 Connect the DVM to the +10 V test jack on the front panel of IRTM. Record the DVM reading. It should be 10.000 tolerance, 6 1 0.010 V DC. If the reading is out of perfor= the necessary-bench calibration per the Bailey Product Instruction Manual. Ch. 4, NI-3 DVM (as found) VDC Was Ch. 4, NI-3 IRTM bench calibration perfor=ed? yes/no Ch. 4, NI-3 DVM (as left) VDC Ch. 4, NI-3 Verified Date Ch. 3, NI-4 DVM (as found) VDC Was Ch. 3, NI-4 IRTM bench calibration perfor=ed? yes/no Ch. 3, NI-4 DVM (as lef t) VDC Ch. 3, NI-4 Verified Date 6.5.3 Place the IRTM test selector in the BALANCE position. Connect the DVM to the BALANCE test jack on the front plate of the Logarith=ic A=plifier (LA). Record the DVM reading. It should be 0.000 1 0.001 VDC. If the reading is 6 out of tolerance, adjust the BALANCE pot on the front or the Log A=p to bring in tolerance. Ch. 4, MI-3 BALANCE DVM (as found) VDC LA balance adjust =ent perfor=ed? yes / no Ch 4, NI-3 BALANCE DVM (as lef t) VDC Ch. 4, NI-3 Verified Date Ch. 3, NI-4 BALANCE DVM (as found) VDC LA balalnce adjustment perfor=ed? yes / no Ch. 3, NI-4 BALANCE DVM (as left) VDC Ch. 3, NI-4 Verified Date 6.5.4 Place the IRTM Test Selector in the 10-6 position and con-nect the DVM to the OUTPUT test jack on the front plate of the Log A=p. Record the following readings: DVM reading should be 6.250 1 0.010 VDC. All Log Amp readings should be within 7.0 x 10-7 to 1.5 x 10-6 a=ps. 2239 182
t, . - , 8 ST 5030.02. 4 V 4 Ch. 4 RPS Indications: Ch. 4, NI-3 DVM VDC Log Amp Indication Amps Control Room Indications: NI-NI3 Log Meter Amps Amps NR-NI3-1 Recorder NR-nil,3 Recorder A=ps Computer point R818 Log Amps Convert R818 reading to amps using the following formula: NI-3 amps = (10)R818 = Amps Channel 4, NI-3 Verified Date 4 Ch. 3 RPS Indications: VDC V Ch. 3, NI-4 DVM Log Amp Indication A=ps Control Room Indications: NI-NI4 Log Meter Amps NR-NI2,4 Recorder - Amps Computer point R812 Log Amps Convert RS12 to amps using the following for=ula: NI-4 A=ps = (10)R812 . Amps Channel 3, NI-4 Verified Date Place the IRTM test selector la the 10-3 position. Record 6.5.5 the following readings: DVM reading should be 10.000 : 0.100 VDC. All Log Amp readings should be within 7.0 x 10-* to 1.5 x 10-3 a=ps. 4 Ch. 4 RPS Indications: VDC V Ch 4, NI-3 DVM Amps Log Amp Indication 2239 183
l' 9 ST 5030.02. 4 Control Room Indications: NI-NI3 Log Meter Amps NR-NI3-1 Recorder A=ps NR-nil,3 Recorder Amps Computer point R818 Log Amps Convert RS18 reading to amps using the following formula:
- NI-3 Amps = (10)R818 = A=ps Ch. 4, NI-3 Verified Date 4 Ch. 3 RPS Indications:
Ch. 3, NI-4 DVM VDC Log Acp Indication Amps Control Room Indications: NI-NI4 Log Meter Amps NR-NI2,4 Recorder Amps
. Computer point R812 kg A=ps Convert R812 reading to amps using the following formula:
NI-4 Amps = (10)R812 = Amps Channel 3, NI-4 Verified Date 6.5.6 Place the IRTM test selector in the 10-11 position. Record the following readings: DVM should indicate 0.000 2 0.100 VDC. All Log A=p readings should be within 7.0 x 10-12 to 1.5 x 10-11 amps. 4 Ch. 4 RPS Indications: Ch. 4, NI-3 DVM VDC Log Amp Indication Amps Control Room Indications: NI-NI3 Log Meter A=ps NR-NI3-1 Recorder A=ps 2239 184
10 ST 5030.02,4 D NR-NI1,3 Recorder A=ps Computer Point R818 Log Amps Convert R818 to amps using the following formula: NI-3 Amps = (10)R818 = Amps Channel 4, NI-3 Verified Date
. 4 Ch. 3 RPS Indications:
Ch. 3, NI-4 DVM _VDC Log Amp Indication A=ps Control Room Indications: NI-NI4 Log Meter Amps NR-NI2,4 Recorder A=ps Computer point R812 Log Amps Convert RS12 reading to amps using the following formula: NI-4 amps = (10)R812 = Amps Channel 3, NI-4 Verified Date 6.5.7 Place the IRTM Test Selector in the (Log A=p) CAL OUT posi-tion and connect the DVM to the INPUT test jack of the Source Range Bypass /HIGH VOLT CUTOFF BISTABLE. Rotate the CALIBRATION OUTPUT pot on the IRTM full CCW. Reset the SR Bypass /HVC0 BISTABLE and verify bistable la=ps are dim. Channel 4, NI-3 Verified Date Channel 3, NI-4 Verified Date 6.5.8 Rotate the Cal. Output pot on the IRTM until the SR Bypass /HVC0 bistable just trips as indicated by BRIGHT state lamps. Record the trip voltage reading which should be 2.500 : 0.005 VDC. Ch. 4, NI-3 DVM VDC Ch. 4, NI-3 Verified Date Ch. 3, NI-4 DVM VDC Ch. 3, NI-4 Verified Date 2239 185
11 ST 5030.02.3 kbgpl 6.5.9 Rotate the Cal output pot on the IRTM CC'J until the SR Bypass /HVC0 bistable just resets (output state lamp DIM). Record the DVM reading. It should be 2.124 : 0.005 VDC. Ch. 4, NI-3 DVM VDC Ch. 4, NI-3 Verified 'Date Ch. 3, NI-4 DVM VDC Ch. 3, NI-4 Verified Date 6.5.10 Place the IRTM test selector in the "0 DPM" position and connect the DVM to the " OUTPUT" jack on the I.R. Rate of Change A=p (R of CA). Record the following readings. The DVM should read 0.909 : 0.002 VDC while the R of CA =eter and the computer point should read 0.00 t 0.22 DPM, and the Control Roos meter should read 0.00 1 0.11 DPM. Ch. 4, NI-3 RPS Indications: Ch. 4, NI-3 DVM VDC NI-3 R of CA meter DPM 4EF Control Room Indications: NYl-MI3 meter DPM A871 DPM Channel 4, NI-3 Verified Date Ch. 3, NI-4 RPS indications: Ch. 3, NI-4 DVM VDC NI-4 R of CA meter DPM Control Room Indications: NYl-NI-4 =eter DFM A864 DPM Ch. 3, NI-4 Verified Date 2239 186 V
12 ST 5030.02.3 (,,j 6.5.11 Place the IRTM test selector in the "10 DFM" position. With the DVM connected to the " OUTPUT" Jack on the IR R of CA record the following readings. The DVM should indicate 10.000 3 0.007 VDC, the computer point and the R of CA =eter should read 10.0 t 0.22 DPM and the control room indication should saturate above +5.0 DPM. NOTE: The 10 DEM signal is developed by a ramp generator with a period of approxi=ately 45 seconds. Record readings after stable conditions are verified on the DVM. Disregard intermittent SUR Rod Withdrawal Inhibit Alarms as this function will be verified later in this procedure. Channel 4, NI-3 RPS Indications: , Ch. 4, NI-3 DVM VDC NI-3 R of CA meter DPM Control Room Indications: NY1 - NI3 meter DPM A871 DFM V Channel 4, IG-3 verified Date _ ,_ Channel 3, NI-4 RPS Indications: Ch. 3, NI-4 DVM VDC NI-4 R of CA =eter DFM Control Room Indications: NY1 - NT4 meter DFM A864 DFM Channel 3, NI-4 verified Date 6.5.12 Place the IRTM in the " Rate-of-Change Amplifier CAL CUT" position and rotate the " CAL CUT" pot full CCW. Ch. 4, NI-3 verified Date Ch. 3, NI-4 verified Date q,,j 6,5.13 Reset the SUR Rod Withdrawal Inhibit 31 stable (SUR RWI). Verify the annunciator window - RPS SUR RCD WITHDRAWAL 2239 187
13 ST 5030.02 6 kggy/ INHIBIT - is reset. Ch. 4, NI-3 verified Date Ch. 3, NI-4 verified Date 6.5.14 Verify the OUT INHIBIT lamp at the Diamond Station in the Control Room is OFF. Ch. 4, NI-3 verified Date Ch. 3, NI-4 verified Date 6.5.15 Connect the DVM to the INPUT test jack on the SUR RWI Bistable. Rotate the CAL OUT pot on the IRTM clockwise until the SUR RWI Bistable just trips as indicated by output and memory state la=ps bright. Record the DVM reading; it should read 3.636 + 0.020 VDC. If the reading 6 is out of tolerance, adjust the SETPOINT pot to bring the trip point within tolerance. Ch. 4, NI-3 DVM as found VDC Was adjust =ent performed? yes / no , kqgp/ Ch. 4, NI-3 DvM as left VDC Channel 4, NI-3 verified _Date Ch. 3, NI-4 DVM as found VDC Wa adjustment perfor=ed? yes / no Ch. 3, NI-4 DVM as lef t VDC Channel 3, NI-4 verified Date 6.5.16 With the SUR RWI Bistable still tripped, verify the annun-ciator window RPS SUR R0D WITHDRAWAL INHIBIT is alarmed. Also, verify the OUT INHIBIT la=p at the Diamond Station is ON and computer point Q841 is alarmed. 6 NOTE: These three indications will NOT alarm if > 107. FP. If power is ?>107. FP, record as N/A. Ch. 4, NI-3 verified Date Ch. 3, NI-4 verified Date _ \,,p/ 6.5.17 Slowly rotate the CAL OUT pot on the IRTM until the SUR RWI Bistable just resets as indicated by the' output state lamp dim. Record the DVM reading; it should be 1.818 + 2239 188
14 ST 5030.02.6 I5.,/ 0.070 VDC. If the reading is out of tolerance adjust @E ' the DEADBAND pot to bring the reset point within toler-ance. Ch. 4, NI-3 DVM as found VDC Was adjust =ent performed? yes / no Ch. 4, NI-3 DVM as lef t _VDC Channel 4, NI-3 verified Date Ch. 3, ' NI-4 DVM as found VDC Was adjustment performed? yes / no Ch. 3, NI-4 DvM as lef t VDC Channel 3, NI-4 verified Date 6.5.18 With the SUR RWI Bistable reset, verify the alarms and indications of Step 6.5.16 are clear. Record N/A if
) 10% FP.
\%- / Ch. 4, NI-3 verified Date f Ch. 3, NI-4 verified Date 6.5.19 Place the IRTM in the " TEST OPERATE" position. Ch. 4, NI-3 verified Date Ch. 3, NI-4 verified Date 6.5.20 Reset the SUR RKI bistable if tripped - verify both state la=ps are dim. Ch. 4, NI-3 verified Date Ch. 3, NI-4 verified Date 6.5.21 Reset the SR Bypass /HVC0 Bistable - verify both state lamps are dim. NOTE: This bistable vill be tripped if reactor power is greater than approxicately 5 x 10-10 amps. Record N/ A if this is the case. \- / Ch. 4, NI-3 verified Date Ch. 3, NI
- verified Date 2239 189
15 ST 5030.02.5 6.5.22 Place the IRTM in the ".0PERATE" position. The "0M TEST" lamp should be DIM. Ch. 4, trI-3 Verified Date Ch. 3, NI-4 Verified Date 6.5.23 Conneer the DvM to the "OUIPUT + 1000" Jack on the Detec-tor Power Supply. Record the DVM reading, the Detector Power Supply meter reading and the applicable computer point. The DVM should indicate 0.600 t 0.036 VDC. The meter and computer point should indicate 600 g 36 VDC. Ch. 4, ITI3 DVM VDC Ch. 4, NI3 Meter VDC CHANNEL 4 Ch. 4, NI3 E833 VDC Ch. 4, NI3 Verified Date Ch. 3, NI4 DVM VDC Ch. 3, NI4 Meter VDC Ch. 3, trI4 E826 VDC Ch. 3, NI4 Verified Date 6.5.24 Connect the DVM to the " OUTPUT + 100" jack on the Auxil-iary Power Supply (Compensation Voltage). Record the DVM reading, the Auxiliary Pouer Supply reading and the applicable computer point. The DVM should indicate 0.250 1 0.030 VDC. The meter and co=puter point should indi-cate 25 3 VDC and -25 : 3 VDC respectively. 5l Ch. 4, NI3 DVM VDC Ch. 4, NI3 Meter VDC CFRI'IEL 4 VDC Ch. 4, NI3 E832 Ch. 4, t(I3 Verified Date Ch. 3, NI4 DVM VDC ~' Ch. 3, NI4 Meter VDC CFXniEL 3 Ch. 3, NI4 E825 VDC Ch. 3, NI4 Verified Date 2239 190
16 ST 5030.02.6 , 6.6 Power Range 6.1.1 Place the Power Range Test Module (PRTM) test selector switch in the " TEST /0PERATE" position. The "0N TEST" lamp shculd go
**/ bright. Remove from scan the computer points associated with the RPS channel being tested, and inform the Control Roca 6 Operator that the points will NOT update.
Ch.1: R794, R795, F722, F729, F859 Verified Ch 2: R803, RSO4, F723, F728, F861 Ch 3: R813, R814, F724, F731, F863 Date
, Ch 4: R819, RS20, F725, F730, F864 The " TEST TRIP" lamp on the Reactor Trip Module should go bright.
Verified Date 6.6,2 Place all four Siculated Contact switches on the Contact Monitor Test Module (CMIM) in the "0N" position. Verified Date 6.6.3 Place the CMTM test selector switch in the " SIMULATED INFUT" position. The "0N TEST" la=p should go bright. Verified Date 6.6.4 Place the Flow Test Module (FTM) test selector switch in ss,,f the "1007." position. The "0N TEST" lacp should go bright. Verified Date 6.6.5 Place the FRTM test selector switch in the "IER0" position. NOTE: Some of the following steps will trip various bistables associated with the Power Range. Unless the bistable is being specifically tested, dis-regard. Verified Date 6.6.6 The Top Linear .,p Meter should indicate 0 2.57 power. __7. power Verified Date
- 1. Connect the DVM to the " OUTPUT" test jack of the Top Linear Amp and record voltage. It should be 0.0000 1 0.0001 VDC. (Adjust "ZER0" pot of the Top Linear Amp if necessary. Record "as found" & "as left" =
below.) As found VDC a ( ,j Was adjustment perfor=ed? yes / no As left VDC Verified Date 2239 191
e 17 ST 5030.02. 6 6.6.7 Record the Bottom Linear Amp Meter reading; it should indicate 0 1 2.57. power.
- 7. Power Verified Date
- 1. Connect the DVM to the "OUTPITr" test jack of the Bottom Linear Amp and record voltage. It should be 0.0000 0.0001 VDC. (Adjust "ZER0" pot of the Bottom Linear Amp if necessary. Record "as found & "as left" below.)
As found VDC Was adjustment performed: yes / no As left VDC Verified Date 6.6.8 Record the Total Flux Su= ming Amp ceter reading. It should indicate 0 2.57. power.
- h. Power' Verified Date
- 1. Connect the DVM to the following test jacks on the Total Flux Su==ing A=p and record the voltage.
Acceptable values are shown in parenthesis.
"El" (less than +0.0005 VDC) VDC "E2" (less than +0.0005 VDC) VDC "E3" (less than +0.0001 VDC) VDC "E4" (less than +0.0001 VDC) VDC "E OUT" (0.0000 3 0.0002 VDC)
As found VDC Was adjust =ent perfor=ed? yes / no As left VDC NOTE: If "El", "E2", "E3" and "E4" readings are in 6 tolerance and "E OUI" is out of tolerance, adjust the
" BALANCE" pot on the Total Flux Su= ming A=p.
Record the "as found" and "as left" readings.
" SCALED OUT" (0.0001 0.001 VDC) VDC Verified Date 6.6.9 Record the Scaled Difference Amp ceter reading. It should indicate 0 3 2.57. i= balance.
- 7. Imbalance Verified Date
- 1. Connect the DVM to the follcwing test jacks on the .
2239 192
18 ST 5030.02.6 Scaled Difference Amp and record the voltage. Acceptable values are shown in parenthesis.
"E1" (less than +0.0005 VDC) VDC "E2" (les s than +0.0005 VDC) VDC "E01" (-5.00010.002 VDC)
As found VDC Was adjustment perfor=ed? yes / no As left VDC NOTE" If "E1" and "E7" readings are in tolerance 6 and "E01" is. out of tolerance, adjus c the " BIAS" pot on the Scaled Difference Amp. Record "as found" and "as left" readings. Verified Date 6.6.10 Place the PRDI in the " RANGE" position and connect the DVM to the "OUTPtTr" test jack of the Top Linear Amp. Adjust 6 " TEST INPUT 1" pot for a DVM reading of +11.520 3 0.010 VEC. Record DVM reading and the =eter reading. The meter should read 72 i 2 . 57. . Repeat for Bottom Linear A=p using
" TEST INPtTr 2" pot. " OUTPUT" Top DVM VDC Top Meter 7. Power " OUTPUT" Bottom DVM VDC Bottom Meter 7. Power Verified Date 6.6.11 With the PRnf in the " RANGE" position and the DVM connected to the "E1" test jack on the Total Flux Su==ing A=p, adjust the " TEST IN?tTE 1" pot on the PRnt for a DVM indication of approxi=ately 10.000 VDC. Repeat with the DVM connected to the "E2" test Jack and adjusting the " TEST INPUT 2" pot.
El DVM VDC E2 DVM VDC Verified Date 6.6.12 Connect the DVM to the "E OUT" test jack on the Total Flux Su==ing A=p. The DVM should read , El + E2 j' O.005 VDC.
' l-Calculated VDC s Actual VDC U Verified Date 2239 193
19 ST 5030.02.5 6.6.13 Cannect the DVM to the " SCALED OUT" test jack on the Total Flux Su==ing A=p. The DVM should indicate the voltage (sign reversed) from Step 6.6.12 2 0.005 VDC. Verified Date VDC 6.6.14 The Total Flux Su= sing'A=p =eter should indicate 125 1 2.5% Power. Verified Date
% Power 6.6.15 Connect the DVM to the "El" test jack on the Scaled Dif ference Amp and adjust the " TEST INPUT 1" pot on the PRTM for a DVM reading of approximately 1.0 VDC.
Verified Date - El = VDC 6.6.16 Connect the DVM to the "E2" test jack on the Scaled Dif ference Amp and adjust the " TEST INPUT 2" pot on the PRTM for a DW1 reading of approximately 0 VDC. Date E2 = VDC Verified 6.6.17 Connect the DVM to the "E01" test jack on the Scaled Dif f erence A=p and record the voltage. It should be: 0.005 VDC E01 = [-K (El - E2) - 5 VDC] : (Adjustment of the " FINE GAIM" pot may be necessary) VDC kggp/ E01 Calculated As Found VDC Was adjustment perfor=ed? yes / no As left VDC Verified Date NOTE: Check the latest co=pleted copy of ST 5030.02 or TP 800.18 to find a value of "K". The latest setting is K = 1.7535 for Ch. 5 1,1.730 for Ch. 2,1.7525 for Ch. 3, and 1.7365 for Ch. 4. 6.6.18 Record the Scaled Difference Amp =eter reading. It should be: Scaled Diff A=p Meter % = E01 (Calc. in 6.6.17) x 125 - 62.5 : 2.5%
-10 VDC i= balance.
5
% Calculated % I= balance Date Verified 6.6.19 Connect the DVM to the "El" test jack on the Scaled Dif f erence Amp and adjust the " TEST INPUT 1" pot on the PRTM for a DVM indication of approximately 0 VDC.
Date El = VDC Verified 6.6.20 Connect the DVM to the "E2" test jack on the Scaled Difference A=p and adjust the "' JEST INPUT 2" pot on the PRT.I for 2239 194
20 ST 5030.02 6
, a DVM indication of approxi=ately 1.0 VDC.
E2 = VDC Verified Date 6.6.21 Connect the DVM to the "E01" test jack on the Scaled Differ-ence k:rp and record the voltage. It should be: E01 = 0.005 VDC
-K (El - E2) - 5 VDC]
E01 Calculated VDC E01 VDC
, Verified Date Record the Scaled Difference A=p =eter reading. It should be:
6.6.22 Scaled Diff A=p Meter % = E01 (Cale in 6.6.21) x 125 - 62.5 : 2.5% i= balance. -10 VDC
% Calculated % Imbalance Verified Date 6.6.23 Place the PRTM test selector switch in the " CAL OUT" posi-tion and rotate the " SUM" pot full CCW. Adjust the " DIFFER-ENCE" pot for an indication of approxi=ately 07. i= balance on the Scaled Difference A=p.
Verified Date 6.6.24 Reset the Flux > 107. bistable as necessary. Verified Date 6.6.25 Connect the DVM to the " INPUT" test jack on the Flux > 107, bistable. Verified Date 6.6.26 Adjust the " SUM" pot on the PRTM clockwise until the Flux
> 107, bistable trips. Record the DVM indication. It should be +0.800 0.080 VDC (corresponds to 10 1 1.07.
6 Power). If the reading is out of tolerance adjust the "SETPOI!TI" pot to bring the trip point within toler-ance. As found VDC Was adjustment perfor=ed? yes / no As left VDC Verified Date 6.6.27 Verify that the Flux > 107. Aux Relay la=ps are bright (top three lights only). Verified Date 2239 195
~
21 ST 5030.02 6 - 6.6.28 Adjust the "Sm!" pot on the PRn! CCU until the Flux > 107, bistable resets. Record the DVM indication. It should be
+0.400 0.080 VDC (corresponds to 5 17. Power). If the 6 reading is out of tolerance, adjust the "DEADBAND" pot to bring the reset point within tolerance.
As found VDC Was adjustment perfor=ed? yes / no As left VDC Verified Date 6.6.29 Verify that all four lamps on the Flux > 107. Aux Relay are dim. Verified Date 6.6.30 Reset the Power /I=bal / Flow Trip Bistable if necessary. Verified Date 6.6.31 Adjust the "Smi" pot on the PRD1 full CCW. Verified ,,Date 6.6.32 Reset the Overpower Trip Bistable if necessary. Verified Date 6.6.33 Connect the DVM to the " INPUT" test jack on the Overpower Trip Bistable. Verified Date 6.6.34 Adjust the "Sm!" pot on the PRT:t CW until the Overpower Trip Bistable trips. Record the DVM indication. It should be +8.38 +0.00, -0.060 Vrc (corresponds to 104.75
+0.00, -0. 757. Power) .
VDC Verified Date NOTE: This setpoint is for normal operatior. Certain plant conditions require other setpoints. There-fore, verify the proper setpoint from the Shift Fore =an. Tolerance is +0.000, -0.060 VDC. 6.6.35 Verify the following for the applicable channel. Annunciator alarm "RPS HI FLUX TRI?" alarmed Verified Date Computer alarm R793,Ch 1 Cocputer alarm R802, Ch 2 Cceputer alars RS11,ch 3 Computer alar: RS17, Ch 4 Verified Date 2239 196
.. - 22 ST 5030.02 6 .
Thei " Channel Trip" la=p on the Reactor Trip Module is bright. Verified Date
/ 6.6.36 Adj ust the " SUM"' pot on the PRni full CCW. The Overpower 6 Trip Bistable should remain in thr tripped state.
Verified Date 6.6.37 Reset the Overpower Trip Bistable. Verified Date _ 6.6.38 Verify that the " CHANNEL TRIP" lamp on the Reactor Trip Module is DIM. Verified Date 6.6.39 Connect the DW1 to the "X1 OUTPUT" test jack on the Total Flow Buffer A=p. Verified Date 6.6.40 Place the FTM Test Sele ctor Switch in the " CAL OUT" position. Verified Date 6.6.41 Adjust the " CAL OUT" pot on the FTM for a DWi indication of: Ch. 1 -9.3391 .017 VDC (Corresponds to 149.4256 : 3.3 MPPH) Ch. 2 -9.3323 .017 VDC (Corresponds to 149.3243 : 3.3 MPPH) 6 Ch. 3 -9.3342 : .017 VDC (Corresponds to 149.3472 : 3.3 MPPH) Ch. 4 9.3211 : .017 VDC (Corresponds to 149.1376 : 3.3 MPPH) VDC Verified Date V 6.6.42 Connect the DVM to the "E01" test jack on the Scalled Difference A=p. Verified Date G.6.43 Adjust the " DIFFERENCE" pot on the PRTM for a DW1 indication of -5.000 2 0.017 VDC (corresponds to 0 2 0.5% I= balance). VDC Verified Date NOTE: If the Power /I= balance / Flow Trip Bistable is tripped, reset che bistable. 6.6.44 Connect the DWi to the " SCALED OUT" test jack on the Total Flux Su==ing Amp. Verified Date 6.6.45 Adj ust the " SUM" pot on the PRTM until the Power /I= balance / Flow Trip Bistacle trips, at a DVM indication of 8.40 1 0.020 VDC (corresponds to 105 : 0.257. Full Power). Veri 2239 197 v $
23 ST 5030.02.6 f I g ify that the applicable RPS FI.UX 1 FLUX - FI.CU Trip and computer point has alar =ed in the Control Room. VDC Verified Date Co=puter alarm A850,Ch 1 Computer alarm A856,Ch 2 Computer alarm A862,Ch 3 Co=puter alarm A869,Ch 4 Verified Date NOTE: The Overpower Trip Bistable should also trip. 6.6.46 Adjust the " SUM" pot on the PRTM for a DVM indication of 0.000 t 0.017 VDC (corresponds to 0.000 0.57. Power); The Power /Imbal/ Flow Trip Bistable should remain in the 6 tripped state. VDC Verified Date 6.6.47 Reset the Power /Imbal/ Flow Trip Bistable. Verified Date 6.6.48 Reset the Overpower Trip 31 stable. Verified Date 6.6.49 Adjust the " SUM" pot on the PRTM for a DVM indication of
+8.000 0.020 VDC (corresponds to 100 i 0.257. Full Power). . VDC Verified Date Ensure the Total Flow "X1" re=ains at -9.3391 : .017 VDC Ch. 1, 6.6.50 -9.3323 : .017 VDC Ch. 2, -963342 : .017 VDC Ch. 3, -9.3211 : .017 VDC Ch 4.as in Step 6.6.41. (DVM connecped at "X1" output at Total Flow Buffer Amp.)
VDC Verified Date 6.6.51 Connect the DvM to the "E01" test jack on the Scaled Dif-ference Amp. Verified Date 6.6.52 Adjust the " DIFFERENCE" pot CCW on the PRTM until the Power / I=bal/ Flow Trip Bistable trips, at a DVM indication of
-6.16 1 0.020 VDC (corresponds to +14.5 + 0.25% I= balance).
Verify control Room alarms as in Section 6.6.45. VDC Verified Date 6.6.53 Adjust the " SUM" pot until the Total Flux Su= ming Amp ceter indicates appro:umately 07. power. (DVM connected to " SCALED OLTI" on Total Flux A=p.) Verified Date 2239 198
24 ST 5030.02.5 g 6.6.54 Reset the Overpower Trip Bistable if tripped. Verified Date 6.6.55 Check the Reactor Trip Module to verify the Power /Imbal/ Flow Trip Bistable did trip the channel. Channel trip la=p BRIGHT Verified Date 6.6.56 Connect the DVM to the "E01" test jack on fue Scaled Dif-ference Amp and adjust the " DIFFERENCE" pot on the PRn1 for a DVM indication of approximately -5.0C VDC (corres-ponds to 07. I= balance). Verified Date 6.6.57 Reset the Power /Icbal/ Flow Trip Bistable. Verified Date 6.6.58 Adjust the " SUM" pot on the PRni for a DVM indication of
+8.000 0.020 VDC (corresponds to 100 t 0.257. Full Power).
(DVM connected to the " SCALED OUI" on the Total Flux Amp.) V VDC Verified Date 6.6.59 Connect the DVM to the "E01" test jack on the Scaled Dif-ference A=p. Verified Date 6.6.60 Adjust the " DIFFERENCE" pot C'J on the PRni until the Power / Imoal/ Flow Trip 31 stable trips at a DW1 indication of
-2.9334 1 0.020 VDC (corresponds to-25.7710.25'; Imbalance).
Verify Control Room alarms as in Section 6.6.45. VDC Verified Date 6.6.61 Adjust the " DIFFERENCE" pot on the PRDI for a DW1 indica-tion of approxicately -5.000 VDC. Verified Date 6.6.62 Reset the Power /Imbal/ Flow Trip 31 stable. Verified Date 6.6.63 Ensure the Total Flow, "X1" remains at -9.3391 : .017 VDC Ch. 1,
-9.3328 : .017 VDC Ch. 2, -9.3342 : .017VDC Ch. 3, -9.3211 : .017 VDC Ch. 4 as in Step 6.6.41. (DVM connected at "X1" V output on Total Flow Buffer A=p.) ,
VDC Verified Date 2239 199
N, f '). '
- y.-
i - 25 ST 5030.02.5 6.6.64 Connect the DVM to the " SCALED OUT" test jack on the Total Flux Su=ning A=p. Verified Date 6.6.65 Adjust the " SUM" pot on the PRI?! for a DVM indication of
+4.800 t 0.017 VDC (corresponds to 60 t 0.2". Full Power) .
VDC Verified Date 6.6.66 Connect the DVM to the "E01" test jack on the Scaled Dif-ference A=p. Verified Date 6.6.67 Adjust the " DIFFERENCE" pot CW on the PRD! until the Power / Isbal/ Flow Trip Histable trips at a DVM indication of
-1.840 0.020 VDC (corresponds to -39.5 3 0 25 Imbalance).
Verify Control Room alarms as in Section 6.6.45. Verified Date 6.6.68 Return the " DIFFERENCE" pot for a DVM indication of approxi-mately -5.000 VDC (corresponds to 07. Imbalance) . Verified Date INN 6.6.69 Reset the Power /Imbal/ Flow Trip Bistable. Verified Date Ensure the Total Flow "X1" re=ains at -9.3391 t .017 VDC Ch. 1, 5 6.6,70 -9.3328 : .017 VDC Ch. 2, -9.3342 : .017 VDC Ch. 3, -9.3211 :
.017 VDC Ch. 4 as in Step 6.6.41. (DVM connected at "X1" output on Total Flow Buffer A=p.
VDC Verified Date 6.6.71 Connect the DVM to the " SCALED OUT" test jack on the Total Flux Su= ming A=p. Verified Date 6.6.72 Adjust the " SCI" pot on the PRD1 for a DVM indication of t6.000 t 0.020 VDC (corresponds to 75 p.25 Full Power). VDC Verified Date 6.6.73 Connect the DVM to the "E01" test jack on the Scaled Difference A=p. Verified Date i 6.6.74 Adjust the "DIFFERE::CE" pot CC'J on the PRn! until the Power /I=bal/ Flow Trip 31 stable trips, at a DVM indication 2239 200
26 ST 5030.02.5 of -6.560 2 0.020 VDC (corresponds to +19.5 : 0.25% I= balance). Verify Control Room alarms as in Section 6.6.45. VDC Verified Date 6.6.75 Return the "DIFFERE::CE" pot on the PRTM for a DVM indication of -5.000 0.020 VDC (corresponds to 0% Imbalance). VDC Verified Date 6.6.76 Reset the Power /I=bal/ Flow Trip Bistable. Verified Date 6.6.77 Connect the DVM to the " SCALED OUT" test jack on the Total Flux Summing Amp. Verified Date 6.6.78 Adj ust the " SUM" pot on the PRTM for a DVM indication of +8.000 0.005 VDC (corresponds to 100 1 0.06% Full Power). VDC Verified Date 6.6.79 Connect the DVM to the "X1" test jack on the Total Flow Buffer Amp. Verified Date 6.6.80 Adjust the " CAL OUT" pot on the FTM until the Power /Imbal/ Flow Trip Bistable trips, at a DVM indication of: Ch. 1 -8.893 : .020 VDC (corresponds to 142.288 : 3.3 MPPH) g p Ch. 2 -8.887 : .020 VDC (corresponds to 142.192 : 3.3 >OPH) Ch. 3 -8.889 : .020 VDC (corresponds to 142.224 : 3.3 LGPH) Ch. 4 -8.876 : .020 VDC (corresponds to 142.016 : 3.3 MPPH) Verify Control Room alarms as in Section 6.6.45. VDC Vdrified Date 6.6.81 With DVM connected to "X1" jack, return the " CAL OUT" pot on the FTM for a DVM indication of: Ch. 1 -9.3391 : .017 VDC (corresponds to 149.4256 3.3 MPPH) Ch. 2 -9.3328 : .017 VDC (corresponds to 149.3248 : 3.3 MPPH) 5 Ch. 3 -9.3342 : .017 VDC (corresponds to 149.3472 : 3.3 FGPH) Ch. 4 -9.3211 : .017 VDC (corresponds to 149.1376 : 3.3 MPPH) VDC Verified Date 6.6.82 Connect the DVM to the " SCALED OUT" test j ack on the Total Flux Su= ming Amp and adj ust the SUM pot on the PRTM for a DVM indication of 0.000 : 0.020 VDC. VDC Verified Date 6.6.83 Reset the Overpower Trip Bistable. Verified Date v 9 2239 201
s$.'
, 27 ST 5030.02.4
( 6.6.84 Reset the Power /Imbal/ Flow Trip Bistable. Verified Date 6.6.85 Check the Reactor Trip Module to verify the bistable did reset the channel. Channel Trip la=p DIM.. Verified _ _ _ Date . 6.6.86 Return the " SUM" pot on the PRTM to the full CCW position. Verified Date 6.6.87 Perform the following steps in order to cest the tripping of the Power /Puups Trip Bistable.
- 1. Connect the DVM to the " INPUT" test jack on the Power /
Pumps Trip. Bistable. Verified Date
- 2. Place the C>rrM test selector switch in the " CAL OUT" position.
Verified Date
- 3. Adjust the " CAL OUT" pot clockwise on the CMTM until the DVM indicates -8.000, +0.000, -0.005 VDC. Record below.
X= VDC Verified Date 4 Cannect the DVM to the "SETPOINT" test jack on the Power / Pumps Trip bistable. Verified Date
- 5. Place the PRTM test selector switch in the " CAL OUT" position.
Verified Date 6 Adjust the " SUM" pot clockwise on the PRTM until the DVM indicates 7.200 i 0.020 VDC. Record the DVM reading. VDC Verified Date
- 7. Reset the Power / Pumps Trip Bistable.
Verified Date
- 8. Slowly adjust the " SUM" pot clockwise on the PRTM until the Powerc Pu=ps Trip Bistable trips. Record the DVM reading. (The DVM should indicate X + 0.000 VDC, -0.060 VDC. X was determined in Section 6.6.87.3
""-)
2239 202 VDC Verified Da te
ST 5030.02.4 g. 28 . D 9. Verify the following for the appropriate channel: Computer alarm "A851 RPS CH 1 HI FLUX - RCP" is alarmed. Computer alarm "A857 RPS CH 2 HI FLIT.< - RCP" is alarmed. Computer alarm "A863 RPS CH 3 HI FLUX - RCP" is alarmed. Cc=puter alarm "A870 RPS CH 4 HI FLLE< - RCP" is alarmed. Annunciator alarm "RPS HI FLUX /NO RCP ON TRI?" is alarmed. Verified Date
- 10. Adjust the " SUM" pot on the PRTM until the DVM indi-cates 0.00 0.01 VCC. Record the DVM reading.
(This corresponds to 07. Power.) VDC Verified Date
- 11. Reset the Overpower Trip Distable if necessary.
Verified Date
- 12. Check the Reactor Trip Module to verify that the Power / Pumps Trip Bistable did trip this channel as indicated by a ERIGHT channel trip light. .
Verified Date
- 13. Reset the Power /Pu=ps Trip Bistsble.
Verified Date
- 14. Verify the following for the appropriate channel:
Annunciator alarm "RPS HI FLUX /NO RCP ON TRI?" is cleared. Verified Date Computer alarm "A851 RPS CH 1 HI FLUX - RCP" is cleared. Computer alarm "A857 RPS CH 2 HI FLUX - RCP" is cleared. Computer alarm "A863 RPS CH 3 HI FLIT < - RCP" is cleared. Computer alarm "A870 RPS CH 4 HI FLUX - RCP" is cleared. Verified Date
" CHANNEL TRIP" lamp on the Reactor Trip Module is dim.
Verified Date
- 15. Place the CMTM test selector switch in the " SIMULATED INPUT" position.
Verified Date 2239 203
[g!' . * ' 1.- 29 ST 5030.02.6
- 16. Reset the Power /Pu=ps Trip Bistable, if tripped.
Verified Date 6 6.6.88 In order to verify the indications associated with the Power Range Flux, connect the DVM to the " SCALED OITI" jack on the Total Flux Su==ing A=p. Vary the voltage and verify that the desired readings are within tolerance. Voltage is varied by placing the PRTM in the " CAL OUT" and adjusting the "SU:1" pot. Return to scan the computer points associated with the RPS enannel being tested. Ch 1: R795, R794 Ch 2: R804, R803 Ch 3: RS14, RS13 Ch 4: RS20, RS19 Veriff 4 __ Date Channel 1 Control Room Control Rocc Desired VDC NI-NI6 R795 Actual VDC (Tol i 2.57.) (Tel 2. 57.) (Tol 3 0.005) DSR I ACT DSR ACT 0.0 0.0 0.0 N/A 2.500 31.25 31.25 5.000 62.50 62.50 7.500 93.75 93.75 10.000 125.00 125.00 l N/A Channel 2 Control Room Control Room Desired VDC NI-NIS R 804 (Tol 3 0.005) Actual VDC (Tot t 2.57.) (Tol ; 2.57.) DSR I ACT l DSR l ACT 0.0 0.0 0.0 N/A 2.500 31.25 l 31.25 5.000 62.50 62.50 7.500 93.75 93.75 l h, 10.000 '23.00 125.00 I N/A l l . 2239 204
l 30 ST 5030.02.6
- O Channel 3 Control Room Control Room Desired VDC NI-NIS R 814 (Tol 0.005) Actual VDC (Tol 2 . 57.) (Tot 2. 57.) _
DSR I ACT DSR ACT o.o O.o o.o N/A 2.500 31.25 31.25 5.060 62.50 62.50 7.500 93.75 93.75 10.000 125.00 125.00 ! N/A j Channel 4 Control Room Control Room Desired VDC NI-NI7 R 820 Actual VDC (Tol i 2.57.) (Tol 2. 57.) (Tol 1 0.005) DSR I ACT i DSR l ACT 0.0 0.0 0.0 N/A l 2.500 31.25 31.25 5.000 62.50 62.50 7.500 93.75 93.75 10.000 125.00 l125.00 l g/A l 6.6.89 Return the " Sun" Potentiometer on the PRTS1 to the full CC'.J position. Reset the Overpower Trip 31 stable and the Power / I: balance / Flow Trip 31 stable if necessary. 6 Verified Date 6.6.90 Place the PRT>i in the "0PERATE" position. Verified Date G' 2239 205
N' 31 ST 5030.02 6 6.7 Contact Monitor 6.7.1 Connect the DVM to the "t10V" test jack on the Omi and record the DVM reading. (The DVM should, indicate +10.000 ') to 10.010 VDC.) If the reading is ONC ot tolerance, per-form a bench calibration per the applicable Bailey Pro-duct Instruction Manual. As found VLC Was bench calibration perfor=ed? yes / no As left VDC Verified Date
? 6.7.2 Place the Omi test selector switch in the "ZER0" position.
Verified Date 6 . 7'.3 Connect the DVM to the " OUTPUT" test Jack on the 001 and record the DVM reading. (The DVM should _ indicate 0.00 6 +0.00, -0.05 VDC.) If the reading is out of tolerance, perfors bench calibration per Step 6.7.1. As found VDC Was bench calibration perforced? yes / no As left VDC Verified Date 6.7.4 Place the CITM test selecter switch in the " SIMULATED INPUT" position. Verified Date-6.7.5 Complete the following table by placing the " SIMULATED CONTACT" switches on the O m! in the listed position, verifying the "C0hIACT STATE" lights on the C:01 and verify-ing the desired DVM reading. This step verifies the correct voltage input to the Power / Pump Trip Bistable for the various combinations of Reactor Coolant Pumps in operation. Date 2239 206 Verified (TS) NOTE: The folleving is a suc=ary of the li=its of Tech-nical Specification (TS) 2.2.1 for the RPS High Flux /Nu=ber of Reactor Coolant Pumps on Trip. TRIP SET?OINT A1.LO*. A3 LE_.V A._'_ F. l 'JDC 8
. ? 0' : E ?- tVDC I ~ L1 :7, Cne Tump Cpa ating 55 +0.000, f4.40 -0.00.-0.03 1-0.375 g,t.,:,22Nl:i53,:5, In Each Loco Tuo Pa ;s Cperating U.00 -0.00, 0.00 +0.00. -0.03 -0.375 60.0224 6,,0.23 In One Lcop; So
- Pumns in ':he C-her' I j ::c s n en.y } l l-- l
( ( ( . Simulated Contact Contact State I. amps . Voltage - RC linp Switclics 2 3 4 (VDC) 1 Condition 2 3 4 DSR ACT DSR ACT DSR ACT ACT DSR ACT 1 DSR OFF Otl ON ON BRIClir DIM DIM DIM *9.936 One RC linp 0FF
" "" '" " " ~~
O!I ON OFF ON DIt! DI!! IIRIGilT DIM *9.936 - ON ON ON OFF DIM DIM DIM B!tICllT *9.936 OFF ON OFF ON llRICllT DIt! BRIClir DIM *4.288 Two RC I'mps 0 11 0FF OFF ON DIt! BRIClrr - BRIGilT DIM *4.288 OFF , M ON OFF Otl OFF DIt! BRICllT DIM llRI GIIT *4.288 (one in - en, loop) OFF Otl ON OFF BRIGirr DIM DIM BRICirr *4.288 OFF OFF ON ON IIRICirr BRICilT DIM , DIM **0.00 FF in same Igog O!! ON OFF OFF DIM DI M IlltICllT 11RICllT ** 0.00 ON OFF OFF OFF DIt! IIRICllT BRICitT BRICl!T **0.00 Tliree itC linps OFF ON OFF OFF BRICllT DIM BRICirr BRICirr **0.00 0FF y 0FF OFF ON OFF BRICllT BRICitT DIM BRICirr **0.00 m O OFF OFF OFF O!I BRICilT 11RICllT llRICirr DIM **0.00 .o
^ BRICitT BitICllT liRICitT BitICllr F OFF OFF OFF OFF **0.00
Pmps OFF 3 g ON O!I ON ON DIM DIM DIM DIM > 10.00
- Tolerance 40.000 to -0.030 VDC
" Tolerance 40.000 to -0.05 VDC
~ , 2239 2o7 g g .
/ ,7
(. .. ST 5030.02.6 f' 33 6 7.6 Perform the following steps in order to test the Contact Monitor Aux Power Supply.
- 1. Place the "0N-OFF" switch cn the Contact Monitor Aux Power Supply in the "0FF" position.
Verified Date
- 2. Verify the following:
Annunciator alars "RPS RCP DC SCITR VOLT LO" is alar:ed. Verified Date Co=puter alar: E837 RPS RCP DC >SITR VOLT is alar =ed. Verified Date
- 3. Place the "0N-OFF" switch on the Contact Monitor Aux Power Supply in the conitor in the "0N" pcsition.
Verified Date
- 4. Depress the " RESET" switch on the Contact Monitor Aux Power Supply Module.
Verified Date S.' Verify the following: Annunciator alars "RPS RCP DC SCITR VOLT LO" is cleared. Verified Date
- 6. Connect the DVM to the " OUTPUT 100", test jack at the Cont'act Monitor Aux Power Supply and record the DVM reading. (The DVM should indicate -1.250 3 0.009 VDC.) If tne reading is out of tolerance, 6
adjust the output pot on the Aux Power Supply to bring within tolerance. As found VDC Was adjust =ent perfor=ed? yes / no As left VDC Verified Date
- 7. Record the reading on the =eter on the front plate of the Contact Monitor Aux Power Supply Module.
(This reading should be 125 ; 6 VDC.) VDC Verified Date
- 8. Return CMIM to "0PERATE" position.
Verified Date
- 9. Reset the Power /Pu=ps Trip Bistable if necessary.
Verified Date 2239 208
34 ST 5030.02.3 \,,s/ 6.8 Contain=ent Pres sure
)
6.8.1 Depress the " TEST" switch on the high building pressure trip contact buffer. Verified Date 6.8.2 Verify the following:
- 1. Both " INPUT STATE" la=ps on the high building pres-sure trip contact buf fer should be "0:l".
Verified Date
- 2. Annunciator alarm "RPS CTMT HI PRESS TRIP" is alar =ed.
Verified Date 3 Verify one of the following (circle appropriate line): Computer alarm P857 RPS CH 1 CTMT HI PRESS is alar =ed. Cocputer alarm P862 RPS CH 2 CT!C HI PRESS is alarmed. Co=puter alarm PS67 RPS CH 3 CTMT HI PRESS is alar =ed. Co=puter alarm P872 RPS CH 4 CTMT HI PRESS is alarmed. \%,/ Verified Date 4 The " CHANNEL TRIP" lamp on the Reactor Trip Module is BRIGHT. Verified Date 6.8.3 Depress the " RESET" switch on the high building pressure trip contact buffer. Verified Date 6.8.4 Verify the following:
- 1. Both" INPUT STATE" la=ps on the high building pressure trip Contact Buffer should be OUT.
Verified Date 2 Annunciator alarm "RPS CTMr HI PRESS TRIP" is cleared. Verified Date
- 3. Verify one of the following (circle appropriate line):
\s / Computer alarn P857 RPS CH 1 CTMT HI PRESS is cleared. Co=puter alarm PS62 RPS CH 2 CTMT HI PRESS is cleared. Computer alarm PS67 RPS CH 3 CTMT HI PoESS is cleared. Cocputer alarm P372 RPS CH 4 CTSC HI PRESS is cleared. Verified Date 2239 209
, -35 ST 5030.02.6 4 .- The "CHAlmEL TRIP" lamp on the Reactor Trip Module is DIM.
Verified Date IIl 6.9 RCS Temperature Instru=ent 6.9.1 Connect the DVM to the "-10V" test jack on the TTM and record the DVM indication. (The DVM should indicate -10.00 6 to -10.01 VDC.) If the reading is out of tolerance, perform neces-sary bench calibration per Bailey Product Instruction Manual. As found VDC Was bench calibration perfor=ed? yes/no As left VDC 6.9.2 Connect the DVM to the "I:iPUT" test jack on the Temperature Signal Converter Module. Verified Date 6.9.3 Perform the following steps in order to test the linearity of the Linear Bridge and of the indications associated with the temperature string.
- 1. Remove from scan the following computer point associated with the RPS channel being tested.
Ch 1: P 721, T 721 Ch 2: T 730, P 729 Ch 3: P 722, T 722 Ch 4: T 731, P 730 Verified Date kgggf 2. Ensure that the " METER SELECT" switch cn the Te=pera-ture Signal Converter Module is in the " TEMP" post-tion. Verified Date
- 3. Place the TIM test selector switch in the "0%"
position and record the DVM reading. The DVM
' indication should be the sa=e as the indication vric-ten on the linear bridge for the 204 chs resistance + 0.000350 VDC.
Linear Bridge Indication = VDC DVM Reading = VDC
- 4. Place the T711 test selector switch in the "507."
position and record the DVM reading. The DVM indication should be the sa=e as the indication written on the linear bridge for the 214 ohs resis-tance + 0.000350 VDC. . Linear Bridge Indication = VDC DVM Reading = VDC
- 5. Place the T711 tes t selector switch in the "1007."
kgggl position and record the DVM reading. The DVM indi-cation should be the same as the indication writ-2239 210
36 ST 5030.02.5 h ten on the linear bridge for the 224 ch:2 resistance t 0.000350 VDC. Linear Bridge Indication = VDC DVM Reading = VDC
- 6. Connect the DVM to the "TDIP CUTPUT" test jack on the Temperature Signal Converter Module. Record the DW1 Reading.
DVM Reading = VDC Calculate the following: 5l X= (DVM reading of 6.9.3.5) x (-100) X= ( ) x (-100) = VDC 5l X should equal the DWI reading of 6.9.3.6 0.015 VDC. Verified Date
- 7. P1;e the mi test selector switch in the "507." posi-tion and record the DVM reading.
DVM Reading = VDC 5l Y= (DWI reading of 6.9.3.J.) x (-100) Y=( ) x (-100) = VDC 5l Y should equal the DMI reading of 6.9.3.7 0.015 VDC. Verified Date
- 8. Place the mi test selector switch in the "O*/." posi-tion and record the DVM reading.
DVM Reading = VDC Calculate the following: 5l Z= (DVM reading of 6.9.3.3 ) x (-100)
) x (-100) = VDC Z= (
5{ Z should equal the DVM reading of 6.9.3.8 2 0.015 VDC. Verified Date V O 2219 211 W
f, , '
- 37 ST 5030'.02.4 6.9.4 Perform the following steps in order to test the tripping of the High Temperature Trip Bistable.
- 1. Place the PT:t and TTM selector switches in the " CAL OE" position.
Verified Date
- 2. Connect the DVM to the " INPUT" test jack on the Pres-sure/ Temperature Trip Bistable.
Verified Date
- 3. Adjust the " CAL OW " pot CW on the Pnt until the DVM indicates 6.875 1 0.020 VDC. (This corresponds to an RCS pressure of 2250 psig.) Record the DVM reading.
VDC Verified Date 4 Reset the Pressure / Temperature Trip Bistable if necessary. Verified Date
- 5. Reset the High Temperature Trip , Low Pressure Trip and .High Pressure Trip bistables if necessary.
Verified Date
- 6. Connect the DVM to the " INPUT" test jack on the high temperature trip bistable.
Verified Date 2239 212 V
h ,c: i, 38 ST 5030.024 V (TS) 7. Slowly adjust the " CAL OUI" pot on the TTM CW until the high temperature trip bistable trips. Record the DVM reading. (This reading should be
+9.835 +0.000, -0.035 VDC, which corresponds to an RCS high temperature trip setpoint of 618.35 +0.00, -0.350F. Note that this is in accordance with TS 2.2.1 as the trip setpoint is 6190F and the allowable value is 619.08 F.)
VDC Verified Date
. 8. Verify the following for applicable channel:
Computer alarm T856 RPS CH 1 RC HI TEMP is alar =ed. Computer alarm T857 RPS CH 2 RC HI TEMP is alar:ed. Computer alarm T858 RPS CH 3 RC HI TEMP is alarced. Computer alarm T859 RFS CH 4 RC HI TEMP is alar:ed. Verified Date The "CEMCiEL TRIP" lamp on the Reactor Trip Module is BRICKI. Verified Da t e \/
% 9. Slowly adjust the " CAL OUT" pot fully CCW on the TIM. Record the DVM reading.
VDC Verified Date
- 10. Verify that the High Tecperature Trip Bistable remains 6 in the tripped state.
Verified Date
- 11. Slowly adjust the " CAL OUT" pot on the TTM CW until the DVM indicates +9.000 + 0.020 VDC. Record the DVM reading. (This corresponds to an RCS tempera-ture of 6100F.)
VDC Verified Date
- 12. Reset the High Temperature Trip Bistable.
Verified Date
- 13. Verify the following for the appropriate channel:
Annunciator alarm "RPS RC HI TEET TRIP" is cleared. \s / Verified Date The "CRUC;EL TRIP" lamp on the Reactor Trip Module is DIM. Verified Date 2239 213
39 ST 5030.02.6 Computer a.larm T856 RPS CH 1 RC HI TEMP is cleared. Computer alarm T857 RPS CH 2 RC HI TRIP is cleared. Computer alarm T858 RPS CH 3 RC HI TEMP is cleared. Computer alarm T859 RPS CH 4 RC HI TEMP is cleared. Verified Date , (TS) , 6.9.5' Perform the following to verify that the setpoint of the Pressure / Temperature Trip Bistable follows the following equation as found '.n Technical Specification 2.2.1:
, P = 16.25 Tout - 7873 and is within the allowable value of P = 16.25 To ut - 7873.64.
The following steps will verify four points as defined by the above equation.
- 1. Connect the DVM to the "TDIP OUTPUT" test jack on the Temperature Signal Converter Module.
Verifi2d Date
- 2. Slowly adjust the " CAL OITI" pot clockwise on the TTM until the DVM reads +10.000 + 0.010 VDC. Record the DVM reading. (This reading corresponds to a TH of 620 F.)
VC=D VDC Verified Date
- 3. Convert the above voltage to "T H " by using the fol-lowing for=ula:
, VDC 'M" x 100 + 5200F 10.000 Tg = OF Verified Date 4 Convert the above "0F" to a pressure setpoint (PSP) by using the following formula:
NOTE: Determine SP p to three (3) decimal places. Pg7 - 16.25 Tg - 7869.4 psig Verified Date PSP =
- 5. Convert the above "Pgp" to volts DC by using the following for=ula:
P3 p - 1700 VDC " x 10 VDC VDC Verified Date-VDC = 2239 214
a 40 ST 5030.02.4 O 6. Connect the DVM to the "SETPOI:rI" test jack on the Pressure / Temperature Trip Bistable. Verified Date
. 7. Record the DVM reading. This should be VDC t 0.010 VDC. (VDC as deter =ined in Step 6.9.5.5 above.)
VDC Verified Date
- 8. Connect the DVM to the " TEMP CUTPUT" test jack on the temperature Signal Converter Module.
Verified Date
- 9. Slowly adjust the " CAL OtJI" pot CCW on the TTM until 4 the DVM reads +7.5000 0.010 VDC, Record the DVM reading. (This reading corresponds to a TH Of 5950F.)
VDC = VDC Verified Date
- 10. Convert the above voltage to "TH " by using the fol-lowing for=ula:
DC TH"i x 100 + 520 F (10.000 F Verified Date TH=
- 11. Convert the above "0F" to a pressure setpoint (PSP) by using the following for=ula:
NOTE: Deter =ine PSP to three (3) dect=al places. 4 P3 p = 16.25 Tg - 7869.4 Pp= 3 psig Verified Date
- 12. Convert the above "P3 p" to volts DC by using the following for=ula:
VDC = x 10 VDC 800
-VDC Verified Date VDC "
- 13. Connect the DVM to the "SETPOI:TI" test jack on the Pressure /Te=perature Trip Bistable.
Verifiel Date 14 Record the DVM reading. This reading sh'ould be VDC 0.010 VDC. (VCC as deter =ined in Step 6.9.5.12.) VDC Verified Date 2239 215
f' 't ' . . f ' 'bo 41 ST 5030.02.4
- 15. Connect the DVM to the "TE}!? CUTPUT" test jack on the Te:sperature Signal Converter Module.
Verified Date 16 Slowly adjust the " CAL OUI" pot CCW on the E! 4 until the DVM reads +2.500 t 0.010 VDC. Record the DVM reading. (This reading corresponds to a T H f 5450F.) VDC = VDC Verified Date
~
- 17. Convert the above voltage to "T H by using the fol-loving formula:
TH= x 100 + 5100F 10.000 TH= F Verified Date
- 18. Convert the above "0F" to a pressure setpoint (P3p) by using the following formula:
N0frE: Determine 3P p to three (3) decimal places. 4 P3p = 16.25 TH - 7869.4 PSP = psig Verified Date
- 19. Convert the above "P3 p" to volts DC by using the following for=ula:
Pep - 1700
~
VDC " x 10 VDC 800 VDC = VDC Verified Date
- 20. Connect the DVM to the "SETPOI'Tr" test jack on the Pressure / Temperature Trip Bistable.
Verified Date
- 21. Record the DVli reading. This reading should be VDC t 0.010 VDC. (VD C as determined in Step 6.9.5.19 above.)
VDC Verified Date 6.9.6 Perform the following steps in order to test the tripping of the Pressure / Temperature Trip Bistable.
- 1. Connect the DVM to the "TE!!? OLTIPUT" test jack on the Te=perature Signal Convertor 5todule.
Verified Date 2239 216
ST 5030.02.4 42 V 2. Slowly adjust the " CAL OLTI" pot CW on the TTM until ,y the DVM indicates +9.000 1 0.020 VDC. Record the o-DVM reading. (This corresponds to an RCS tempera-ture of 6100F.) VDC Verified Date
- 3. Reset the High Temperature Trip Bistable if necessary.
Verified Date
- 4. Connect the DVM to the "SETPOINT" test jack on the Pressure /Te=perature Trip Bistable.
Verified Date
- 5. Record the reading on the DVM.
Y VDC Verified Date
- 6. Connect the DVM to the " INPUT" test jack on the Pres-sure/Te=perature Trip Bistable.
Verified Date \/
% 7. Slowly adjust the " CAL OUT" pot on the PTM CCW until the Pressure / Temperature Trip Bistable just trips. Record the DVM reading. (The DVM should 4 indica;e Y r_0.010 VDC.)
VDC Verified Date
- 8. Verify the following for the channel being tested:
Annunciator alarm "RPS RC PRESS - TEMP iRI?" is alar =ed. Verified Date Cocputer alarm A852 RPS CH 1 RC PRESS - TEM? is alarced. Computer alarm A858 RPS CH 2 RC PRESS - TEMP is alarmed. Co=puter alarm A865 RPS CH 3 RC PRESS - TEMP is alar =ed. Computer alarm A872 RPS CH 4 RC PRESS - TEMP is alar =ed. Verified Date The "CHAN'iEL TRIP" lamp on the Reactor Trip Module is BRIGitT. Verified Date \s / 9. Slowly adjust the " CAL OUT" pot on the FIM CW until the DVM indicates 10.000 0.050 VDC (correspond.ing to 2500 psig). Record the DVM reading. VDC Verified Date 2239 217
43 ST 5030.02.6
- 10. Slowly adjust the " CAL OUT" pot on the PTM CCW until the DVM indicates t5.688 ; 0.020 VDC.
Record the DVM reading. (This corresponds to an RCS pressure of 2155 psig.) VDC Verified D ite
- 11. Verify that the Pressure / Temperature Trir Bistable remained 6 in the tripped state and reset trips on High Pressure Trip Bistable and Low Pressure Trip Bistable.
Verified Date
- 12. Reset the Pressure /Te=perature Trip Bistable.
Verified Date
- 13. Verify the following for the channel being tested:
Annunciator alarm "RPS RC PRESS - TEMP TRIP" is cleared. Verified Date Computer alarm A852 RPS CH 1 RC PRESS - TEMP is cleared. Co=puter alarm A858 RPS CH 2 RC PRESS - TEMP is cleared. Computer alarm A865 RPS CH 3 RC PRESS - TEMP is cleared. Computer alarm A872 RPS CH 4 RC PRESS - TEMP is cleared. Verified Date The " CHANNEL TRIP" lamp on the Reactor Trip Module is DIM. Verified Date 14 Connect the DVM to the " TEMP OUT" test jack on the Tempc~.ature Signal Converter Module. Verified Date
- 15. Slowly adjus t the " CAL OUT" pot on the TTM CCW until the DVM reads +9.000 + 0.020 VDC. Record the DVM reading. (This corresponds to an RCS temperature of 6100F.)
VDC Verified Date W 2239 218
%v . . '**.c.
44 ST 5030.02 6 6.10 RCS Pressure 6.10.1 Perform the following steps in preparation for testing the High Pressure and. Low Pressure Trip Bistables. *
- 1. Place the PIM and TTM Test Selector Switches in the
" CAL OUT" position.
Verified _Date
- 2. Connect the DVM to the "SETPOINT" test jack on the Pressure / Temperature Trip Bistable.
Verified Date
- 3. Adjust the " CAL OUT" pot on the TIM until the DVM indi-cates +1.251; 0.020 VDC. (This voltage is equiva-lent to a Pressure /Tecperature setpoint of 1831.85 psig corresponding to an RCS Tg of 597 0F.) Record the DVM reading. Adju st PTM " CAL OUT" pot for a pressure ceter reading of approximately 2250 psig.
VDC Verified Date
- 4. Reset the following bistables if tripped:
'*=## Pressure / Temperature Trip Bistable verified High Pressure Trip Bistable h
Verified Low Pressure Trip Bistable Verified Verified Date 6.10.2 Perform the following steps in order to test the tripping of the High Pressure Trip Bistable:
- 1. Connect the DVM to the " INPUT" test jack on the High Pressure Trip Bistable.
Verified Date (TS) 2. Slowly adjust the " CAL OUT" pot on the FrM CW until the High Pressure Trip Bistable trips. Record the DVM reading. (This reading should be +7.455 +0.000,
-0.035 VDC which corresponds to an RCS high pressure 6 setpoint of 2295.4 +0.0, -2.8 psig. Note that this is in accordance with TS 2.2.1 as the Trip Setpoint is $12300 psig and the allowable value is 662301 psig.)
VDC Verified Date
- 3. Verify the following:
Annunciator alarm "RPS RC HI FRESS TRIP" is alarmed. Verified Date 2239 219
.N 45 ST 5030.02. 6 Co=puter alarm PS58 RPS CH 1 RC HI PRESS is alarmed.
Co:puter alarm PS64 RPS CH 2 RC HI PRESS is alarmed. Computer alarm P868 RPS CH 3 RC HI PRESS is alar =ed. Co=puter alarm P873 RPS CH 4 RC HI PRESS is alarmed. Verified Date The "CHAMTEL TRIP" lamp on the Reactor Trip Module is bright. Verified Date
- 4. Slowly adjust the " CAL OUT" pot on the PTM CCW until the DVM indicates +0.000 t 0.010 VDC. Record the DVM reading. (This corresponds to an RCS pres-sure of 1700 psig.)
VDC Verified Date i
- 5. Verify that the High Pressure Trip Bistable remained
> in the tripped state. Verified Date
- 6. Slowly adjust the " CAL OtTI" pot on the PTM 'CW until the DVM indicates +5.688 + 0.020 VDC. Record the DVM reading. (This corresponds to an RCS pressure of 2155 psig.)
VDC Verified Date
- 7. Reset the High Pressure Trip Bistable, Low Pressure Trip Bistable and the Pressure / Temperature Trip Bistable (if tripped).
Verified Date
- 8. Verify the following:
Annunciator alarm "RPS RC HI PRESS TRIP" is cleared. Verified Date Computer alarm P858 RPS CH 1 RC HI PRESS is cleared. Computer alarm PS64 RPS CH 2 RC HI PRESS is cleared. Computer alarm P868 RPS CH 3 RC HI PRESS is cleared. Cocputer alarm PS73 RPS CH 4 RC HI PRESS is cleared. Verifi ed Date 6.10 3 Perform the following steps in order to test the tripping of the Low Pressure Trip Bistable:
- 1. Connect the DVM to the " INPUT" test Jack on the Low Pressure Trip Sistable.
Verified Date 2239 220
, ;;~ ,
C '. .. 1 46 ST 5030.02. 6 (TS) 2 Slowly adjust the " CAL OUT" pot on the PTM CCW until the Low Pressure Trip Bistable trips. Reccrd the DVM reading. (This reading should be +3.6075 +0.125,
-0.000 VDC which corresponds to an RCS low pressure setpoint of 1988.6 +10.0, -0.0 psig. Note that this is in accordance with TS 2.2.1 as the Trip Setpoint is21 1985 psig and the Allowable Value is 2 1984 psig.)
VDC Verified Date
- 3. Verify the following:
Annunciator alarm "RPS RC LO PRESS TRIP" is alarmed. Verified Date computer alarm PS59 RPS CH 1 RC LO PRESS is alarmed. Computer alarm P863 RPS CH 2 RC LO PRESS is alarmed. Computer alarm P869 RPS CH 3 RC LO PRESS is alarmed. Computer alarm P874 RPS CH 4 RC LO PRESS is alarmed. Verified Date The " CHANNEL TRIP" lamp on the Reactor Trip Module is BRIGHT. Verified Date 4 Slowly adjust the " CAL OUT" pot on the PTM CW until the DVM indicates +10.000 t 0.05 VDC. Record the DVM reading. (This corresponds to an RCS pressure of 2500 psig.) VDC Verified Date
- 5. Verify t. hat the Low Pressure Trip 31 stable remained in 6 the tripped state.
Verified Date
- 6. Slowly adjust the " CAL OUT" pot on the PIM CCW until the DVM indicates +5.688 1 0.020 VDC. Record the DVM reading. (This corresponds to an RCS pressure of 2155 psig.)
VDC Verified Date
- 7. Reset the Low Pressure Trip Bistable and the High o^ ^ Pressure Trip 31 stable if necessary.
'" Verified Date 2239 221
47 ST 5030.02.4
- 8. Verify the following for the channel being tested:
Annunciator alars "RPS RC LO PRESS TRIP" is cleared.
~
Verified Date Cc=puter alars P859 RPS CH 1 RC LO PRESS is cleared. Co=puter alars P863 RPS CH 2 RC LO PRESS is cleared. Computer alarm P869 RPS CH 3 RC LO PRESS is cleared. Computer alarm PS74 RPS CH 4 RC LO PRESS is cleared. Verified Date The "CHX mEL TRI?" la=p on the Reactor Trip Module is DIM. Verified Date
- 9. Place the PTM and TTM selector switches in the "0PERATE" position, and return to scan the following ce=puter points associated with the RPS channel being tested.
Pressure Ch. 1: P 721 Te:cerature Ch 1: T721 Ch. 2: P 729 Ch 2: T730 Ch. 3: P 722 Ch 3: T722 Ch. 4: P 730 Ch 4: T731 kgggf Channel 1: 7722, F729, F859 Channel 2: F723, F728, F861 Channel 3: F724, F731, F863 Channel 4: F725, F730, FS64 Verified Date RCS Pressure /Ter.rerature Strine Cheek 6.10. 4 Connect the DVM to the "+10" test jack on the PTM, and record the DVM indication. (The DVM should indicate
+10.00 to +10.01 VDC.)
VDC Verified Date 6.103 Connect the DVM to the " INPUT 2" test jack on the Reactor Coolant Pressure Buf fer Amp. Verified Date 6.10 4 Perfors the following steps in order to test the indica-tions associated with the pressure string.
- 1. Place the PTM selector switch in the ' CAL OUT" posi-kgggl Verified Date
- 2. Adjust the voltage using the " CAL CUT" pot and verify that the readings are within tolerance.
- iOTE: Record data only for the channel being tested.
2239 22?
t 48 ST 5030.02.5 . V Channel 1 Channel 2 Desired Actual Actual Voltage 3 0005VDC Actual Voltage Desired Pressure ejjye Actual Desired voltage Pre s sur e h*yjf* 24 psig 324 ps g 0.0 1700 1700 2.5 1900 , 1900
+ --
5.0 2100 , 2100 7.5 2300 2300 10.0 2500 2500 l Channel 3 l Channel 4 Desired Actual Actual Voltage l Actual Desired g'*}g5 e Actual Desired 10.005VDC Voltage Pressure h* 83 *f' 24 psig: Voltage Pressure 324 psig 0.0 1700 1700 2.5 1900 1900 5.0 2100 2100 7.5 2300 2300 10.0 2500 2500 Verified Date 6.10.7 Connect the DVM to the "-10V" test jack on the TTM and record the DVM indication (the DVM should indicate -10.00 to -10.01 VDC). VDC Verified Date 6.10.3 Perform the following steps in order to test the indications associated with the te=perature string. 5 Connect DVM to " TEMP OUT" test jack on temp. sig. conv.
- 1. Place the TTM selecter switch in the " CAL OUT" position and adjust the " CAL OUT" pct fully CCW.
Verified Date \v 2. Slowly adjust the " CAL OUT" pot on the TTM CW until the DVM indicates 2.500 VDC 1 0.005 VDC. Record the voltage. VDC Verified Date 2239 223
\p - 49 ST 5030.02. 4
- 3. Record the following indications. (All should indi-cate 545 2.50F.)
Tec2perature Signal Converter Meter OF Record the appropriate indications below for the chan-nel being tested: Ch. 1, TI-RC1B2 on the Aux Shutdown Panel F Ch. 2, TI-RCJA4 on the Aux Shutdown Panel F Ch. 3, TI-RC3B4 on Ctra Panel C5705 0F Ch. 4, TI RC3A2 on Ctra Panel C5705 0F Computer Points Ch. 1, T721 0 F Ch. 2, T730 0F i Ch. 3, T722 F 0 Ch. 4 T731 F Verified Date
- 4. Slowly adjust the " CAL CtTr" pot on the It! for a DVM indication of +5.000 3 0.005 VCC. Record the voltage.
VDC Verified ,Date_
- 5. Record the following indications. (All should indi-cate 570 1 2.50F.)
Te=perature Signal Converter Meter F Record the appropriate indications below for the channel being tested: Ch. 1, TI-RC3B2 on the Aux Shutdown Panel 0F Ch. 2, TI-RC3A4 on the Aux Shutdown Panel 0 F Ch. 3, TI-RC3B4 on the Ctra Panel C5705 F Ch. 4, TI-RC3A2 on the Ctra Panel C5705 0 F Computer Points Ch. 1, T721 0F Ch. 2, T730 0F Ch. 3, T722 O _F Ch. 4, T731 0F
- 6. Slowly adjust the " CAL OUT" pot on the TDi for a DVM indication of t9.500 0.005 VDC. Record the voltage.
VDC Verified Date 2239 224
50 ST 5030.02.4 ,
- 7. Record the following indications. (All should read 615 2.50F.)
Q Temperature Signal Converter Meter OF Record the appropriate indications below for the chan-nel being tested: Ch.1, TI-RC3B2 on the Aux Shutdown Panel 0 F Ch. 2, TI-RC3A4 on the Aux Shutdown Panel 0F Ch. 3, TI-RC3B4 on the Ctra Panel C5705 0F Ch. 4, TI-RC3A2 on the Ctro Panel C5705 F Co=puter Points: Ch. 1, T721 0F Ch. 2, T730 0F Ch. 3, T722 0F Ch. 4, T7?1 0F Verified Date 6.11 Perform the following steps in order to test the RCS Flow Instru-ment String of RPS Channel.1. 6.11.1 Connect the DVM to the "+10V" test jack on the FTM and record the DVM indication. (The DVM should indicate +10.00 to +10.01 VDC.) 4 VDC Verified Date 6.11.2 Perform the following steps in order to test the indica- %./ tions associated with the flow string.
- 1. Connect the DVM to the "OUTPtJI" test jack on the Loop A Flow Square Root Extractor (Channels 1 and 2 Loca-tion 1-4-4; Channels 3 and 4 Location 1-5-4) .
Verified Date
- 2. Place the FTM Test Selector Switch in the "ZER0" position and record the DVM reading. (The DVM should indicate 0.000 +0.020, -0.010 VDC.) Wait five (5) minutes before reading the DVM.
VDC Verified Date
- 3. Record the following indications, (These should indicate 0 x 106 lbm/hr 1 3 x 10 0 lbm/hr.)
Meter indication on the Loop A Flow Square Rcot Extractor x 106 lbm/hr Comp Pt. F729 RC LCOP 2 HLG FLO, RPS CH 1 (lePH) x'.106 lba/hr Comp Pt. F728 RC LOOP 2 HLG FLO, RPS CH 2 (lePH), x 10 lbm/hr Camp Pt. F731 RC LOOP 2 HLG FLO, RPS CH 3 (>ePH) x 100 lbm/hr Co=p Pt. F730 RC LOOP 2 HLC FLO, RPS CH 4 (SePH) x 100 lbc/hr Verified Date 2239 225
, . e 51 ST 5030.02.4 4 Connect the DVM to the "Ol'TPUT" test jack on the Loop B Flow Square Root Extractor and record the DVM reading. (The DVM should indicate 0.000 +0.020,
-0.010 VDC (Channels 1 and 2 locacion 1-4-7, Channels 3 and 4 location 1-5-7).
VDC Verified Date
- 5. Record t!.e following indications. (These should indi-6 cate 0.x 10 lbm/hr t 3.x 100 lbm/hr.)
Meter indication on the Loop B Flow Square Root Extractor 0 x 10 lbm/hr Comp Pt. F722 RC LOOP 1 HLG FLO, RPS CH 1 (>9PH) _x 10 6 lbm/hr Comp Pt. F723 RC LOOP 1 HLC FLO, RPS CH 2 (SEPH) x109lbm/hr 0 Comp Pt. F724 RC LOOP 1 HLC FLO, RPS CH 3 (>GPH) x 10 lbm/hr Comp Pt. F725 RC LOOP 1 HLG FLO, RPS CH 4 (19PH)_ x 10 lbm/hr Verified Date
- 6. Connect the DVM to the "X1" test jack on the Total Flow Buffer Amp and record the DVM reading. (The DVM should indicate 0.000 1 0.010 VDC.) (Channels 1 and 2 location 1-4-10, Channels 3 and 4 location 1-5-10.)
VDC Verified Date
- 7. Connect the DVM to the SCALED OITIP1JI" test jack on the Total Flow Buffer Amp and record the DVM reading.
(The DVM should indicate 0.000 1 0.010 VDC.) VDC Verifled Date
- 8. Record the following indications (these should indi-cate 0 x 106 lbm/hr t 3 x 10 lbm/hr).
NOTE: Tolerance for Total Flow Buffer Amp meter indication is t 4.8 x 10 lbm/hr. Meter indication on the Total Flow Buffer Amp is x 106 lbm/hr. Comp Pt. F859 RC HLG TOTAL FLCW, RPS CH 1 (MPPH) x 106 lbm/hr Comp Pt. F861 RC HLG TOTAL FLOW, RPS CH 2 (MPPH) x109lbm/hr Camp Pt. FS63 RC HLG TOTAL FLOW, RPS CH 3 (>ePH) x 10 lbm/hr Comp Pt. F864 RC HLG TOTAL FLOW, RPS CH 4 (>ePH) x 10 lbm/hr Verified Date
- 9. Place the FTM Test Selector Switch in the ."167. INPUT" position.
Verified Date 2239 226
52 ST 5030.02.5
- 10. Connect the DVM to the "INPtTr 1" test jack on the Total Flow Buffer Anp and record the DVM reading. Wait for five (5) minutes before reading the DVM. Record the DVM reading as Erni. (The DVM should read +4.000
+ 0.020 VDC.) ~
VDC Verified Date
- 11. Connect the DVM to the " INPUT 2" test jack on the Total Flow Buffer Amp and record the DVM reading.
Record the DVM reading as E732 (The DVM should read
+4.000 t 0.020 VDC.)
VDC Verified Date
- 12. Calculate the average of EIN1 and Et32 EIN1 + EIN2 ,
2 Verified Date
- 13. Connect the DVM to the " SCALED OUTPUT" test jack on the Teatl Flow Buffer Amp and record the DVM reading.
DVM should read , EIN1 + EIN2 x g 0.010 VDC. 5 K = 0.8990 for Ch. 1, 0.9000 for Ch. 2, 0.8999 for Ch. 3, 0.9011 for Ch. 4. Calculated VDC = VDC Measured VDC = VDC Verified Date
- 14. Record the following indications.
6 (These should indi-6 cate 64 x 10 lbm/hr 1 3 x 10 lbm/hr.) NOTE: Tolerance for Total Flow Buffer Amp meter indi-cation is i 4.8 x 106lbm/hr Meter indication on the Total Flow Buffer Amp x 106 lbm/hr Ccap Pt. F359 RC HLG TOTAL FLOW, RPS CH 1 (MPPH) x 106 lba/hr Comp Pt. F861 RC HLG TOTAL FIDW, RPS CH 2 (MPPH) x 106 lbm/hr Co=p Pt. F863 RC HLG TOTAL FLCW, RPS CH 3 (MPPH) x 100 lbm/hr Comp Pt. F864 RC HLG TOTAL FLOW, RPS CH 4 (MPPH) x 106 lbm/hr Verified _ Date
- 15. Record the following indications.6 (These should indicate 32 x 106 lbm/hr 3 3 x 10 lbm/h r . )
Meter indication on the Loop A Flow Square Root Extractor 6 v x 10 lbm/hr Meter indication on the Loop B Flcw Square Root Extractor x 106 lbm/hr 2239 227
53 ST 5030.02.5 Comp Pt. F729 RC LOOP 2 HLG FLO, RPS CH 1 (>TPH) x 106 lbm/hr Comp Pt. F728 RC LOOP 2 HLG FLO, RPS CH 2 (MPPH) x 10? lbc/hr Comp Pt. F731 RC LOOP 2 HLG FLO, RPS CH 3 (MPPH) x 100 lbm/hr Comp Pt. F730 RC LOOP 2 HLG FLO, RPS CH 4 (MPPH) x 10 lbm/hr Comp Pt. F722 RC LOOP 1 HLG FLO, RPS CH 1 (MPPH) x 106 lbm/hr Comp Pt. F723 RC LOOP 1 HLG FLO, RPS CH 2 (M?FH) x 10 lbc/hr Comp Pt. F724 RC LOOP 1 HLG FLO, RPS CR 3 (MPPH) x 106 lbm/hr Comp Pt. F725 RC LOOP 1 HLG FLO, RPS CH 4 (MPPH) x 106 lbm/hr Verified Date 16 Place the FTM Test Selector Switch in the "1007. INPUT" position. Verified Date
- 17. Connect the DVM to the " INPUT 1" test jack on the Total Flow Buffer Amp and record the DVM reading.
Wait five (5) minutes before reading the DV}i. Record the DVM reading as E731 (The DVM should read
+10.000 t 0.020 VDC.)
EIN1 = VDC Verified Date
- 18. Connect the DVM to the " INPUT 2" test Jack on the Total Flow Buffer Amp and record the DVM reading.
Record the DvM reading as EIN2. (The DVM should read +10.000 t 0.020 VDC.) EIN2 = VDC Verified Date
- 19. Calculate the average of E737 and EIN2-EIN1 + EIN2 =
2 VDC Verified Date
- 20. Connect the DVM to the " SCALED CUTPUT". test jack on the Total Flow Buffer A=o and record the DVM read-E ing. (The DVM should read , IN1 A EIN2 xK: 0.010 VDC.)
2 5 K = 0.8990 for Ch. 1, 0.9000 for Ch. 2, 0.8999 for Ch. 3, 0.9011 for Ch. 4. Calculated VDC VDC Measured VDC VDC
! Verified Date 2239 228
, e
- 54 ST f 030.02. 4 V 21. Record the following 0 indications: 6(These should indicate 160 x 10 lbm/hr 1 3 x 10 lbc/hr.)
NOTE: Tolerance for Total Flow Buf fer Ac:p meter indicator is t 4.8 x 10 6 lbm/hr. Meter indication on the Total Flow Buffer Amp x 106 lbm/hr Comp Pt. F859 RC HLG TOTAL FLCW, RPS CH 1 (MPPH) x 10 lbm/hr Comp Pt. F861 RC HLG TOTAL FLCU, RPS CH 2 (MPPH) x 10 lbm/hr Comp Pt. F863 RC HLG TOTAL FLOW, RPS CH 3 (MPPH) x 10, Ibm /hr Comp Pt. F864 RC HLG TCTTAL FLOW, RPS CH 4 (MP?H) x 10 lbm/hr
- 22. Record the following indications. (These should indi-cate 80 x 106 lbo/hr i 3 x 10D lbm/hr.)
Meter indication on the Loop A Flow Square Root Extractor 10 6 lbm/hr Meter indication on the Loop B Flow Square Root Extractor x 106 lbc/hr Comp Pt. F729 RC LOOP 2 HLG FLO, RPS CH 1 (MPPH) x 106 lbo/hr Comp Pt. F728 RC LOOP 2 HLG FLO, RPS CH 2 (MPPH) x 10 lbs/hr V Comp Pt. F731 RC LOOP 2 HLG FLO, RPS CH 3 (MPPH) x 106 lb=/hr Comp Pt. F730 RC LOOP 2 HLG FLO, RPS CH 4 (MPPH) x 100 lba/hr Comp Pt. F722 RC LOOP 1 HLG FLO, RPS CH 1 (MPPH) x 106 lbm/hr Comp Pt. F723 RC LOOP 1 HLG FLO, RPS CH 2 (MPPH) x 10 lbm/hr Comp Pt. F724 RC LOOP 1 HLG FLO, RPS CH 3 (MPPH) x 106 lbm/hr Comp Pt. F725 RC LOOP 1 HLG FLO, RPS CH 4 (MPPH) x 106 lbm/hr Verified Date
- 23. Place the FTM Test Selector Switch in the "507. INPUT" position.
Verified Date
- 24. Connect the DVM to the " INPUT 1" test jack on the Total Flow Buffer Amp and record the DVM reading.
Wait five (5) =inutes before *eading the DVM. Record the DVM reading as E731 (The DVM should read +7.071 1 0.020 VDC.) EIN1 = WC Verified Date v 2239 229
i .e 55 ST 5030.02.5
- 25. Connect the DVM to the " INPUT 2" test jack on the Total Flow Buffer Amp and record the DVM reading.
Record the DVM reading as EIN2 (The DVM should read +7.071 0.020 VDC.) E IN2 " Verified Date
- 26. Calculate the average of E131 and EIN2' EIN1 + EIN2 ,
2 VDC Verified Date
- 27. Connect the DVM to the " SCALED OUTPUT" test jack on the Total Flow Buffer Amo and record the DVM read-ing. (The DVM should read + E731 EIN2 K: 0.010 VDC.)
5 2 K = 0.8990 for Ch.1, 0.9000 for Ch. 2, 0.8999 for Ch. 3, 0.9011 for Ch. 4 Calculated VDC VDC Measured VDC VDC Verified Date
- 28. Record the fo11owing * '" '
6 - indicate 113.13 x 10 lbm/hr 1 3 x 10 lbm/hr. NME: Tolerance for the Total Flow Buffer Amp meter indication is 1 4.8 x 106 lbm/hr. Meter indication on the Total Flcw Buffer Amp x 10 6 lbm/hr Camp Pt. F859 RC HLG TOTAL FLOW, RPS CH 1 (MPPH) x 100 lbm/hr Comp Pt. F861 RC HLG TEAL FLOW, RPS CH 2 (MPPH) x 10? lbm/hr Comp Pt. F863 RC HLG TOTAL FLOW,- RPS CH 3 (59?H) x 10? lbm/hr Comp Pt. F864 RC HLG TOTAL FLOW, RPS CH 4 (STPH) x 100 lbm/hr Verified Date
- 29. Record the following indications. (These should 6
indicate 56.56 x 10 i 3 x 10 lbc/hr. ) Meter indication on the Loop A Flow Square Root x 10 6 lbs/hr Meter indication on the Loop B Flow Square Root Extractor x 10 lbm/hr 2239 230
56 ST 5030.02. 4 \% ,/ Comp Pt. F729 RC LOOP 2 ELG FLO, RPS CH 1 (MPPH) x 100 lbm/hr Comp Pt. F728 RC LCOP 2 HLG FLO, RPS CH 2 (dePH) x 100 lbm/hr Cocp Pt. F731 RC LOOP 2 HLG FLO, RPS CH 3 (MPPH) x 100 lbm/hr Comp Pt. F730 RC LOOP 2 HLG FLO, RPS CH 4 (MPPH) x 106 lbs/hr Comp Pt. F722 RC LOOP 1 HLG FLO, RPS CH 1 (MPPH) x 106 lbm/hr Comp Pt. F723 RC LOOP 1 HLG FLO, RPS CH 2 (18PH) x 106 lbm/hr Comp Pt. F724 RC LOOP 1 HLG FLO, RPS CH 3 (MPPH) x 100 lbm/hr Comp Pt. F725 RC LOOP 1 HLG FLO, RPS CH 4 (MPPH) x 100 lbm/hr Verified Date
- 30. Place the FTM Test Selector Switch in the "0PERATE" position.
Verified Date 6.12 Verify that all test modules are in the "0PERATE" position and that all "0N TEST" lamps are dim. Verified Date 6.13 Check the " OUTPUT STATE" and ">EF ORY STATE" lamps on all bistables. 6.13.1 Under operating conditions, the Power >107., SD Bypass, \% ,/ Hi Press Trip, and SR Bypass Bistables will be tripped. If any other bistables, or the Hi Bldg. Press Contact Buffer are tripped, reset the appropriate " OUTPUT STATE" and/or ">EMCRY STATE" reset toggles and record which bistables are left in the tripped condition. Bistable Tripped Bistable Tripped Bistable Tripped Verified Date 6.13.2 If Shutdown Bypass is in effect, the following bistables cav be tripped: Power /Imbal/ Flow, if no RCP's running; Power / Pumps - if no RCP's running; Low Pressure; Pres-sure/Te=pe.rature. If any other bistables, or the Hi Bldg Press Contact Buffer are tripped, reset the appro-priate "CUTPUT STATE" and/or " MEMORY STATE" reset toggles and record which bistables are left in the tripped condi-tion. Sistable Tripped Bistable Tripped Bistable Tripped N/ Verified Date 2239 231
w -
, ;.i -
57 ST 3030.02 .6 6.14 Check the Reactor Trip Module to verify the channel is reset and the protective subsystem la=p is di= for the channel being tested.
" CHANNEL TRI?" lamp DIM Verified Date " BREAKER TRIP" la=p D:M Verified Date '.'TESk' TRIP" lamp DIM Verified Date Protective channel, Operate /Si=ulate Trip switches in the " OPERATE" ,
position and " PROTECTIVE CHANNEL" lacp DIM for the channel being ' tested. l Verified Date 6.15 Return the channel to service by placing the key operated " MANUAL BYPASS" switch in the "0PER\TE" position. Verified Date 6.16 Lock RPS cabinet doors. Verified Date 6.17 Check Alarm Typer and I'ine Printer for propcr annunciation during testing. Verified Date 6.18 Notify the Shif t Foreman that the test is complete and che.chan-nel is back in service and return keys. Verified Date ,
. Performed by Date i Date
- 7. ACCEPTANCE CRITERIA '
i 2.2.1 7.1 The RPS functions of Channel were checked and the set-4.3.1.1.1 points are within the Technical Specification li=its. 4.3.3.6) Designated ihviewer Date ; NOTE: Route to Designated Reviewer for sign-off of Acceptance , Criteria prior t.o routing to Shift Fore =cn for acknowledge- [
=ent en the Data Cover Sheet. ~
h d' I D ua 2239'23?
'}}