Text

Inservice Inspection Report
	ML022630288
Person / Time
Site:	Calvert Cliffs
Issue date:	09/17/2002
From:	Katz P; Constellation Energy Group
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	Download: ML022630288 (165)
	v • d • e

Peter E. Katz Vice President Calvert Cliffs Nuclear Power Plant Constellation Generation Group, LLC 1650 Calvert Cliffs Parkway Lusby, Maryland 20657 410 495-4455 410 495-3500 Fax Constellation Energy Group September 17, 2002 U. S. Nuclear Regulatory Commission Washington, DC 20555 ATTENTION:

SUBJECT:

Document Control Desk Calvert Cliffs Nuclear Power Plant Unit No. 1; Docket No. 50-317 Inservice Inspection Report Please find enclosed the Inservice Inspection Report for the Calvert Cliffs Nuclear Power Plant Unit 1.

This inspection fulfilled the intentions and requirements stated in our program plan and our commitment to comply with American Society of Mechanical Engineers Code Section XI Inservice Inspection Requirements.

Should you have questions regarding this matter, we will be pleased to discuss them with you.

Very truly yours, PEK/TWG/bjd

Enclosures:

(1)

(2)

ASME Boiler & Pressure Vessel Code Section XI, Form NIS-1 ASME Boiler & Pressure Vessel Code Section XI, Form NIS-2 cc:

Mr. Craig Lowry (Without Enclosures)

R. S. Fleishman, Esquire J. E. Silberg, Esquire Director, Project Directorate I-1, NRC D. M. Skay, NRC H. J. Miller, NRC Resident Inspector, NRC R. I. McLean, DNR IN

ENCLOSURE (1)

ASME BOILER & PRESSURE VESSEL CODE SECTION XI, FORM NIS-1 Calvert Cliffs Nuclear Power Plant September 17, 2002

NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS (As required by the Provisions of the ASME Code Rules)

1. Owner Constellation Energy, P.O. Box 1475, Baltimore, MD 21203 (Name and Address of Owner)

2. Plant Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 Page 1 of 2 (Name and Address of Plant)

3. Plant Unit 4 Owner Certificate of Authorization (if required)

5. Commercial Service Date 6 National Board Number for Unit

7. Components Inspected I

N/A 5/08/1975 20911 Component or Manufacturer or Manufacturer or Installer State or National Board No Appurtenance Installer Serial No Province No Reactor Pressure Vessel Combustion Engineering CE-67107 14000NV 20911 Pressurizer Combustion Engineering CE-67602 14000NV 20915 Steam Generator #11 Combustion Engineering CE-67504 14000NV 20922 Steam Generator #12 Combustion Engineering CE-67505 14000NV 20923 Reactor Coolant Pipe Combustion Engineering N/A N/A N/A Safety Injection Bechtel N/A N/A NIA Pioin/Sunoorts Pressurizer Spray Bechtel N/A N/A N/A Pioine/Sunoorts Shutdown Cooling Bechtel N/A N/A N/A PioinO/SuDoorts Main Steam Bechtel N/A N/A N/A Pinin*/Sunnorts Charging Piping/Supports Bechtel N/A N/A N/A Letdown Piping/Supports Bechtel N/A N/A N/A Pressurizer Safety & Relief Bechtel N/A N/A NIA Pioing/Sunoorts Feedwater Piping/Supports Bechtel N/A N/A N/A

8. Examination Dates 4/28/2000 to 6/19/2002

9. Inspection Period Identification:

1999 to 2002

10. Inspection Interval Identification: 1999 to 2009

11. Applicable Edition of Section XI 1998 Addenda None

12. Date/Revision of Inspection Plan: CCNPP Units I & 2 Third Interval ISI Plan, Revision 0

13. Abstract of Examinations and Tests Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan.

NIS-1 Page 2 of 2 The examinations reported herein constitute the fifteenth report of Inservice Inspections performed at Calvert Cliffs Unit 1, and the second report within the first period of the third interval of commercial operation. The examinations for this inspection period, as required by the Third Interval Plan for Calvert Cliffs Units 1 & 2, were performed in accordance with the 1998 Edition of ASME Code Section XA with No Addenda. Nondestructive examination data and procedures are available at the site for review.

14. Abstract of Results of Examinations and Tests A visual inspection of component 6-SI-1214-R-1 revealed a loose bolt at the pipe clamp on snubber 1-52-60.

15. Abstract of Corrective Measures The deficiency found on 6-S1-1214-R-1 was corrected, and four additional inspections were performed; no other problems were identified.

Steam Generators # 11 and #12 lower assemblies were replaced with new units manufactured by B&W Canada.

We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code,Section XI, and c) corrective measures taken conform to the rules of the ASME Code,Section XI.

Certificate of Authorization No (if applicable)

N/A Expiration Date Date 9/3/2002 Signed Constellation Energy By Keith M. Hoffman Owner CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectores and the State or provinces of MARYLAND and employed by FACTORY MUTUAL INSURANCE COMPANY of JOHNSTON, RI have inspected the components described in this Owner's Report during the peroid 4/28/2000 to 6/1912002

, and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the inspection plan and as required by the ASME Code,Section XI By signing this certificate neither the Inspector nor his employer makes and any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection R. W. Lawrence

/

Commissions s(ja 67ZX_.

Mb. 6

-lb Inspector's Signature National Board, State, Province, and Endorsements Date Zoo Z-.

ATTACHMENT 1 Inservice Inspection Report 3-1-2 Constellation Ener-gy, P 0. Box 1475, Baltimore, MD 21203

2. Plant:

Calv 3 Plant Unit 1

4. Owner Certificate of Authorization( If Req.)

N/A 5 Commercial Service Date:

5/08

6. National Board Number for Unit:

2091 EXAM CATEGORY I ITEM NUMBER:

--I Reactor Coolant System I Reactor Vessel Head ert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657

/1975 11 Summary/ID No 140000 Component ID Head Penetrations 1-74 Component Description Reactor Vessel Head CRDM, ICI & Vent Line Penetrations Comments This examination was performed in response to NRC Bulletin 2002-01. The exam was performed by Framatome ANP personnel with CCNPP Level II and Level III oversight. Pictures are located at CCNPP for review Exam Results-VARIOUS Summary/ID No 170000 Exam Results, 170200 Exam Results 170100 2002VE002 Accept Component ID BACI CNTMT Mode 3 PS Component Descnption MODE 3 POST SHUTDOWN WALKDOWN 2002BV134 Accept BACI AUX BLDG Mode 5/6 MODE 5/6 AUXILLARY BUILDING WALKDOWN 2002BV145 Accept BACI CNTMT Mode 5/6 MODE 5/6 CONTAINMENT WALKDOWN Comments Exams performed per NRC Generic Letter 88-05 & MN 3-301 (Boric Acid Program); all components with boric acid build-up listed in IR3-076-465, IR3-076-466, and IR3-076-467. No active leakage was noted Exams per NRC GL 88-05 & MN-3-301 (Boric Acid Program) IR3-080-634 written due to active leakage on 1-cvc-210q in the 5' VCT Rm IR3-080-635 wntten for various components with boric acid build-up No active leakage seen under this MO.

Exams per NRC GL 88-05 & MN-3-301(Boric Acid Program). Lower RPV head examined remotely.

Videotape with report. Htr pen. examined with insulation removed lAW requ for a VT-1 exam. New S/G manway studs with new S/G. No Boric Acid seen in these areas.

Exam Results-2002BV139 Accept

1. Owner:

Page 1 of 19

Page 2 of 19 ATTACHMENT I Inservice Inspection Report 3-1-2

1. Owner:

Constellati

2. Plant.

Calvert Cli

3. Plant Unit:

1 4 Owner Certificate of Authorization( If Req)

N/_A

5. Commercial Service Date:

510811975

6. National Board Number for Unit:

20911 EXAM CATEGORY I ITEM NUMBER:

AUGMT MAIN STEAM on Energy, P 0 Box 1475, Baltimore, MD 21203 ffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 Summary/ID No 422000 Exam Results' 427600 Exam Results 427700 Exam Results:

427650 Exam Results, 431750 Exam Results*

431900 Component ID 36-MS-1201-3LU 2002BU034 Accept 2002BM052 Accept 34-MS-1202-13LU 2002BU036 Accept 2002BM062 Accept 34-MS-1202-13LD 2002BM036 Accept 2002BU037 Accept 34-MS-1202-13 2002BM034 Accept 2002BU035 Accept 6-MS-1208-1 ON 2002BU027 Accept 2002BM038 Accept 6-MS-1208-11N Component Description LONGITUDINAL SEAM LONGITUDINAL SEAM LONGITUDINAL SEAM PIPE TO PIPE PIPE TO PIPE Comments Allocated in accordance with CCNPP Augmented Inservice Examination Program.

Allocated in accordance with CCNPP Augmented Inservice Examination Program.

Allocated in accordance with CCNPP Augmented Inservice Examination Program Allocated in accordance with CCNPP Augmented Inservice Examination Program Allocated in accordance with CCNPP Augmented Inservice Examination Program PIPE TO VALVE 1-CV-4071 Allocated in accordance with CCNPP Augmented Inservice Examination Program. Single side access due to configuration. Weld preparation prevented complete coverage of far side. This item may be considered for relief.

Exam Results*

2002BU028 Accept 2002BM039 Accept I..---

Page 3 of 19 ATTACHMENT 1 Inservice Inspection Report 3-1-2

1. Owner.

Constellation E

2. Plant.

Calvert Cliffs IN 3 Plant Unit 1

4 Owner Certificate of Authorization( If Req)

N/A

5. Commercial Service Date.

5108/1975

6. National Board Number for Unit.

20911 EXAM CATEGORY I ITEM NUMBER:

B-A l B1.40 REACTOR PRESSURE VESSEL Enerp.qy P 0 Box 1475, Baltimore, MD 21203 Juclear Power Plant, 1650 Calvert Cliffs Pk. Lusby, MD 20657 Summary/ID No.

002350 Component ID 6-209A Component Description HEAD TO FLANGE WELD Comments

Weld metal examined 100%; base metal exam limited due to support lugs.

"Flange configuration, welded lugs, insulation support nng, and weld transition area prevented full exam coverage This item may be considered for relief.

Exam Results' 2002BU025 Accept 2002BM071 Accept EXAM CATEGORY / ITEM NUMBER:

REACTOR PRESSURE VESSEL B-G-1 I B6.10 Summary/ID No 003550 Component ID 1-54 Component Description RPV NUTS 1-54 Comments VT of Rx Head Nuts 1 thru 18, minor mechanical damage, surface nicks, hammer marks. Nuts #1, 4, 15, and 16 showing a higher degree of mechanical damage.

Areas of mechanical damage of the 18 nuts showed no degradation.

Exam Results 2002BV022 Accept EXAM CATEGORY I ITEM NUMBER:

REACTOR PRESSURE VESSEL B-G-1 I B6.30 Summary/ID No 003500 Exam Results Component ID Component Description STUD NUMBERS 1 THROU RPV STUDS 2002BM068 Accept 2002BM056 Accept 2002BU038 Accept 2002BU039 Accept 2002BM067 Accept EXAM CATEGORY I ITEM NUMBER:

REACTOR PRESSURE VESSEL Comments Examined RPV Stud numbers 1 through 18 B-G-1 I B6.50 Summary/ID No 003600 Exam Results' Component ID Component Description WASHER NUMBERS I THR RPV WASHERS 1-54 Comments Washers 1 thru 18 examined, the inner diameter face area of all 18 washers showed minor (small) pitting with no degradiation 2002BV023 Accept

ATTACHMENT 1 Inservice Inspection Report 3-1-2

1. Owner:

Constellati

2. Plant:

Calvert Cli

3. Plant Unit 1

4 Owner Certificate of Authonzation( If Req)

N/A

5. Commercial Service Date:

5108/1975

6. National Board Number for Unit 20911 EXAM CATEGORY I ITEM NUMBER:

PRESSURIZER SPRAY on Ener-gy, P.O. Box 1475, Baltimore, MD 21203 ffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 B-J I B9.11 Summary/ID No 118150 Exam Results' 118100 Exam Results:

Component ID 4-PS-i 003M-6 2002BP067 Accept 2002BU032 Accept 4-PS-1003M-5 Component Description ELBOW TO PIPE PIPE TO ELBOW 2002BU031 Accept 2002BP061 Accept SAFETY INJECTION Summary/ID No 117200 Exam Results.

117300 Exam Results' 117550 Exam Results' 114350 Exam Results' 117350 Component ID 6-SI-1002-29 2002BU066 Accept 2002BP257 Accept 6-S I-1002-31 2002BP157 Accept 2002BU068 Accept 6-S I-1003-23 2002BU070 Accept 2002BP256 Accept 12-SI-1009-16 2002BU077

'Accept 2002BP296 Accept 6-SI-1002-32 Component Descnrption ELBOW TO PIPE Comments ELBOW TO PIPE ELBOW TO PIPE NOZZLE TO SAFE END PIPE TO BRANCH CONNECTION

The PDI austenitic UT procedure not qualified to detect flaws on far side of single side access welds; 50% coverage is max credit allowed Far side of weld examined to max extent possible by approved PDI techniques Item may be considered for relief.

2002BU069 Accept 2002BP259 Accept 6-SI-1002-28 2002BP158 Accept 2002BU065 Accept 6-S1-1002-30 2002BU067 Accept PIPE TO ELBOW PIPE TO ELBOW Comments Exam Results' 117150 Exam Results' 117250 Exam Results' Page 4 of 19

ATTACHMENT 1 Inservice Inspection Report 3-1-2

1. Owner:

Con*

2. Plant:

Calv

3. Plant Unit 1

4. Owner Certificate of Authonzation( If Req)

NIA

5. Commercial Service Date:

6. National Board Number for Unit 2002BP258 Accept SHUTDOWN COOLING stellation Energy. P.O Box 1475, Baltimore, MD 21203 ert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk. Lusby, MD 20657 5/0811975 20911 Summary/ID No 111350 Exam Results' 113000 Exam Results:

111750 Exam Results' 112500 Exam Results' Component ID 14-SC-1004-5 2002BU062 Accept 2002BP154 Accept 14-SC-1 004-29 2002BU029 Accept 2002BP060 Accept 14-SC-1004-10 2002BU063 Accept 2002BP156 Accept 14-SC-1004-20 2002BP155 Accept 2002BU064 Accept Component Description ELBOW TO PIPE ELBOW TO PIPE PIPE TO ELBOW PIPE TO ELBOW Comments Page 5 of 19

1. Owner:

2. Plant:

3. Plant Unit:

4. Owner Certificate of Authorization( If Req) 5 Commercial Service Date:

6 National Board Number for Unit:

EXAM CATEGORYI ITEM NUMBER:

CHARGING (CVCS)

Summary/ID No Component ID 128250 2-CV-1004-6B Exam Results:

2002BP247 Accept 128350 2-CV-1004-6D Exam Results*

2002BP249 Accept 131050 2-CV-1006-14N Exam Results, 2002BP244 Accept 130450 2-CV-1005-29 Exam Results 2002BP304 Accept 128300 2-CV-1004-6C Exam Results*

2002BP248 Accept 131000 2-CV-1006-13N Exam Results*

2002BP243 Accept 131150 2-CV-1006-15N Exam Results 2002BP240 Accept 128100 2-CV-1004-5N Exam Results*

2002BP246 Accept 129100 2-CV-1 005-9N Exam Results, 2002BP241 Accept 129250 2-CV-1005-10B Exam Results*

2002BP242 Accept PRESSURIZER SPRAY Summary/ID No.

Component ID 118550 3-PS-1001-1 Exam Results' 2002BP303 Accept 120350 3-PS-1002-1 Exam Results" 2002BP300 Accept REACTOR COOLANT DRAINS Summary/ID No Component ID ATTACHMENT 1 Inservice Inspection Report 3-1-2 Constellation Energy, P 0 Box 1475, Baltimore, MD 21203 Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk. Lusby, MD 20657 1

N/A 5/0811975 20911 B-J I B9.21 Component Description ELBOW TO PIPE ELBOW TO PIPE ELBOW TO PIPE NOZZLE TO SAFE END PIPE TO ELBOW PIPE TO ELBOW PIPE TO TEE TEE TO PIPE TEE TO PIPE TEE TO PIPE Component Description NOZZLE TO SAFE END NOZZLE TO SAFE END Comments Comments Component Description Comments Page 6 of 19

Page 7of 19 ATTACHMENT 1 Inservice Inspection Report 3-1-2

1. Owner.

Constellation Energy,

2. Plant:

Calvert Cliffs Nuclear

3. Plant Unit 1

4. Owner Certificate of Authonzation( If Req)

NIA

5. Commercial Service Date, 5/08/1975

6. National Board Number for Unit.

20911 131500 2-DR-1004-1 NOZZLE TO SAFE END Exam Results*

2002BP301 Accept EXAM CATEGORY I ITEM NUMBER:

B-J I B9.32 REACTOR COOLANT Summary/ID No Component ID Component Description 101900 30-RC-1 1 A-5/2-DR-1 003 2-IN BRANCH CONNEC Exam Results 2002BM445 Accept 102600 30-RC-11A-10/2-CV-1005 2-IN. BRANCH CONNEC Exam Results, 2002BM448 Accept 104150 30-RC-IB-5/2-DR-1004 2-IN BRANCH CONNEC Exam Results 2002BM446 Accept 104850 30-RC-1IB-10/3-PS-1002 2-IN. BRANCH CONNEC Exam Results 2002BM450 Accept 107050 30-RC-12A-5/2-LD-1004 2-IN. BRANCH CONNEC Exam Results 2002BM447 Accept 102700 30-RC-11A-1013-PS-1001 3-IN. BRANCH CONNEC Exam Results 2002BM449 Accept P 0 Box 1475, Baltimore, MD 21203 Power Plant. 1650 Calvert Cliffs Pk. Lusbv. MD 20657 Comments TION TION TION TION TION TION

Page 8 of 19 ATTACHMENT I Inservice Inspection Report 3-1-2

1. Owner:

Constellation

2. Plant Calvert Cliffs r, 3 Plant Unit:

1

4. Owner Certificate of Authonzation( If Req)

NI._A

5. Commercial Service Date:

5/08/1975

6. National Board Number for Unit:

20911 EXAM CATEGORY I ITEM NUMBER:

B-J / B9.40 CHARGING (CVCS)

Summary/ID No Component ID Component Descr 127300 2-CV-1003-33 COUPLING-TO-P Exam Results, 2002BP293 Accept 126100 2-CV-1003-8D PIPE TO VALVE Exam Results' 2002BP254 Accept 126000 2-CV-1003-8B PIPE TO VALVE Exam Results 2002BP252 Accept 125950 2-CV-1003-8A TEE TO PIPE Exam Results:

2002BP251 Accept 125800 2-CV-1003-5 VALVE 1-CV-517 Exam Results 2002BP294 Accept 126050 2-CV-1003-8C VALVE 1-CVC-38 Exam Results 2002BP253 Accept LETDOWN LINES (CVCS)

Summary/ID No Component ID Component Desci 125550 2-LD-1004-8C PIPE TO TEE Exam Results 2002BP308 Accept 125450 2-LD-1004-8A PIPE TO VALVE Exam Results:

2002BP306 Accept 125500 2-LD-1004-8B VALVE 1-CVC-39 Exam Results*

2002BP307 Accept REACTOR COOLANT DRAINS Summary/ID No.

Component ID Component Desci 131550 2-DR-1004-1A SAFE END TO PI Exam Results 2002BP302 Accept Ener.qy, P 0 Box 1475, Baltimore, MD 21203 Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 Comments 1ption IPE 1 -CVC-185 1-CVC-389 TO PIPE 9 TO PIPE Comments 1-CVC-397 7 TO PIPE Comments nptEon IPE iption

Page 9 of 19 ATTACHMENT 1 Inservice Inspection Report 3-1-2

1. Owner:

2. Plant 3 Plant Unit.

4 Owner Certificate of Authorization( If Req.)

5. Commercial Service Date.

6. National Board Number for Unit:

EXAM CATEGORY I ITEM NUMBER:

SAFETY INJECTION Summary/ID No Component ID 135650 1-SI-217 Exam Results:

2002BV112 Accept EXAM CATEGORY I ITEM NUMBER:

REACTOR COOLANT Summary/ID No Component ID 138650 PRESSURE RETAINING C Exam Results" 2002BV178 Accept EXAM CATEGORY IITEM NUMBER:

PRESSURIZER Summary/ID No Component ID 138750 PRESSURE RETAINING C Exam Results 2002BV179 Accept EXAM CATEGORY I ITEM NUMBER:

STEAM GENERATOR Summary/ID No Component ID 138850 PRESSURE RETAINING C Exam Results, 2002BV180 Accept EXAM CATEGORY I ITEM NUMBER:

RCS SI CVCS Summary/ID No Component ID 139050 PRESSURE RETAINING C Exam Results:

2002BV182 Accept EXAM CATEGORY I ITEM NUMBER:

REACTOR COOLANT Summary/ID No Component ID 139150 PRESSURE RETAINING C Exam Results 2002BV183 Accept Constellation Energy, P 0. Box 1475, Baltimore, MD 21203 Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Pk. Lusbv. MD 20657 1

NIA 5/08/1975 20911 B-M-2 I B12.50 Component Descnption VALVE BODIES GROUP 5 B-P I B15.10 Component Description REACTOR PRESSURE VESSEL B-P I B15.20 Component Description PRESSURIZER B-P / B15.30 Component Description STEAM GENERATORS B-P I B15.50 Component Description PIPING B-P I B15.60 Component Description PUMPS Comments Comments Comments Comments Comments Comments

1. Owner.

2. Plant:

3. Plant Unit

4. Owner Certificate of Authorization( If Req.)

5. Commercial Service Date:

6. National Board Number for Unit:

ATTACHMENT 1 Inservice Inspection Report 3-1-2 Constellation Energy, P 0 Box 1475, Baltimore, MD 21203 Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Pk. Lusbv. MD 20657 1

NIA 5/08/1975 20911 EXAM CATEGORY I ITEM NUMBER:

SI CVCS Summary/ID No Component ID 139250 PRESSURE RETAINING C Exam Results' 2002BV184 Accept EXAM CATEGORY I ITEM NUMBER:

SAFETY INJECTION Summary/ID No Component ID 302750 18-SI-1203-H-2, R-1 Exam Results' 2002BP071 Accept 304950 18-S1-1204-H-10, R-6 Exam Results*

2002BP073 Accept 309300 14-SI-1211-H-9 Exam Results, 2002BP035 Accept 310800 12-SI-1214-H-8 Exam Results, 2002BP019 Accept 315500 10-SI-1206-R-4 Exam Results' 2002BP059 Accept 316050 10-S1-1207-R-18 Exam Results:

2002BP292 Accept 319150 8-SI-1221-H-4 Exam Results' 2002BP025 Accept 331150 6-SI-1213-A-1 Exam Results:

2002BP234 Accept 332650 6-S1-1214-R-1 Exam Results' 2002BP318 Accept B-P I B15.70 Component Descnption VALVES C-C I C3.20 Component Description INTEGRAL ATTACHMENT INTEGRAL ATTACHMENT INTEGRAL ATTACHMENT INTEGRAL ATTACHMENT INTEGRAL ATTACHMENT Comments Comments

Pipe attachment in way of examination area.

TWO STANCHIONS ATTACHED TO 10" HC-3-1006 180 DEGREES FROM EACH OTHER INTEGRAL ATTACHMENT INTEGRAL ATTACHMENT INTEGRAL ATTACHMENT INTEGRAL ATTACHMENT Page 10 of 19

Page 11 of 19 ATTACHMENT I Inservice Inspection Report 3-1-2

1. Owner:

Constellation En

2. Plant:

Calvert Cliffs Nuc

3. Plant Unit:

1

4. Owner Certificate of Authoonzation( If Req.)

N/._A 5 Commercial Service Date*

5/08/1975

6. National Board Number for Unit 20911 EXAM CATEGORY I ITEM NUMBER:

C-F-1 I C5.11 SAFETY INJECTION Summary/ID No Component ID Component Descript 310650 12-S1-1214-12 ELBOW TO VALVE er.y, P 0 Box 1475, Baltimore, MD 21203 clear Power Plant, 1650 Calvert Cliffs Pk. Lusby, MD 20657 ion 1-SI-306 Comments

The PD1 procedure Is not qualified to detect defects on the far side of single side access Austenitic welds The inaccessable side has been examined with approved PDI techniques.

- This item may be considered for relief.

Exam Results 20021BU002 Accept 2002BP018 Accept

ATTACHMENT 1 Inservice Inspection Report 3-1-2 Constellation Energy, P.O. Box 1475, Baltimore, MD 21203

2. Plant.

Calvert Clr

3. Plant Unit.

1

4. Owner Certificate of Authorization( If Req.)

N/A

5. Commercial Service Date:

5/0811975

6. National Board Number for Unit:

20911 ffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 EXAM CATEGORY I ITEM NUMBER:

SAFETY INJECTION Summary/ID No 307500 Component ID 14-SI-1201-3 C-F-1 I Exempt Component Description ELBOW TO FLANGE Comments

Exam elbow side only due to configuration The PDI procedure not qualified to detect defects on far side of single side access welds. The far side has been examined to max extent achievable by approved PDI techniques May be considered for relief.

20021BU011 Accept 2002BP030 Accept 18-SI-1204-2 2002BU060 Accept 2002BP076 Accept 10-S I-1207-3 20021BU019 Accept 2002BP036 Accept 8-SI-1220-6 20021BU005 Accept 2002BP021 Accept 8-S1-1221-3 20021 BU008 Accept 2002BP024 Accept 6-SI-1203-11 2002BU024 Accept 2002BP053 Accept 6-SI-1211-14 2002BP034 Accept 20021BU018 Accept 12-SI-1214-15 2002BP020 Accept 20021BU004 Accept 6-SI-1003-10 ELBOW TO PIPE ELBOW TO PIPE ELBOW TO PIPE ELBOW TO PIPE ELBOW TO REDUCER ELBOW TO REDUCER ELBOW TO TEE Exam Results, 304750 Exam Results, 316000 Exam Results 317350 Exam Results 319100 Exam Results 321200 Exam Results, 328700 Exam Results*

310850 Exam Results 321150 Exam Results

PDI procedure not qualified to detect defects on the far side of single side access welds; far side examined to maximum extent achievable by approved PDI techniques. This item may be considered for relief.

2002BP052 Accept 2002BU023 Accept

1. Owner.

FLANGE TO ELBOW Page 12 of 19

ATTACHMENT I Inservice Inspection Report 3-1-2 Constellation Energy. P.O. Box 1475, Baltimore, MD 21203 Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657

3. Plant Unit' 1

4. Owner Certificate of Authorization( If Req)

N!A

5. Commercial Service Date*

5/08/1975

6. National Board Number for Unit 20911 FLANGE TO ELBOW

PDI procedure not qualified to detect defects on the far side of single side access welds; far side examined to maximum extent achievable by approved PDI techniques This item may be considered for relief.

2002BP032 Accept 20021BU016 Accept 10-SI-1203-5 FLANGE TO PIPE

Examined Pipe side only due to configuration. The exam volume on opposite side examined by PDI techniques, but credit cannot be taken for this exam since PDI procedure is not qualified for this volume.

This item may be considered for relief 2002BU026 Accept 2002BP047 Accept 18-S1-1203-1 2002BU059 Accept 2002BP075 Accept 18-S I-1203-7 2002BP135 Accept 20021BU013 Accept 12-SI-1213-6 20021BU010 Accept 2002BP029 Accept 8-SI-1220-16 2002BP022 Accept 20021BU006 Accept 8-SI-1220-18 2002BP023 Accept 20021BU007 Accept 6-SI-1211-2 2002BP044 Accept 2002BU021 Accept 10-SI-1202-3 PIPE TO ELBOW PIPE TO ELBOW PIPE TO ELBOW PIPE TO ELBOW PIPE TO ELBOW PIPE TO ELBOW Exam Results' 302200 Exam Results:

302800 Exam Results' 309750 Exam Results' 318150 Exam Results' 318250 Exam Results' 328000 Exam Results' 312850

Since PDI Aust Pipe Procd not qual'd to detect defects on far side of single sided welds, max coverage claimed can be 50%. Additional constraint of branch connection lowers coverage to 47%.

Far side examined to max extent possible with PDI techniques.

Exam Results' 20021BU015 Accept 2002BP026 Accept

1. Owner:

2. Plant:

Page 13 of 19 324050 6-SI-1206-11 Exam Results' 313450 PIPE TO FLANGE

ATTACHMENT I Inservice Inspection Report 3-1-2

1. Owner.

Constellatic

2. Plant:

Calvert Clif

3. Plant Unit 1

4. Owner Certificate of Authorization( If Req)

N/A

5. Commercial Service Date:

5108/1975 6 National Board Number for Unit.

20911 on Energy. P.O Box 1475, Baltimore, MD 21203 ffs Nuclear Power Plant, 1650 Calvert Cliffs Pk. Lusby, MD 20657 10-SI-1206-10 2002BP048 Accept 6-S1-1211-10 2002BP033 Accept 20021BU017 Accept 12-SI-1216-7 20021BU003 Accept 2002BP017 Accept 10-SI-1206-12 2002BU022 Accept 2002BP045 Accept 18-SI-1204-6 2002BP074 Accept 2002BU061 Accept 18-SI-1203-3 315650 Exam Results:

328500 Exam Results' 312700 Exam Results' 315750 Exam Results' 305000 Exam Results' 302550 Exam Results 312800 Exam Results 323300 Exam Results*

320650 PIPE TO FLANGE PIPE TO FLANGE

PDI procedure not qualified to detect defects on the far side of single side access welds, far side examined to maximum extent achievable by approved PDI techniques. This item may be considered for relief.

PIPE TO REDUCER PIPE TO REDUCER PIPE TO VALVE 1-SI-4146 PIPE TO VALVE MOV-4143 The PDI procedure not qualified to detect defects on far side of single side access welds. The far side has been examined to max extent achievable by approved PDI techniques May be considered for relief.

REDUCER TO PIPE TEE TO PIPE

PDI procedure not qualified to detect defects on the far side of single side access welds; far side examined to maximum extent achievable by approved PDI techniques This Item may be considered for relief.

VALVE 1-SI-401 TO PIPE

The PDI austenibc UT procedure not qualified to detect flaws on far side of single side access welds; 50% coverage is max credit allowed Far side of weld examined to max extent possible by approved PDI techniques Item may be considered for relief.

Exam Results' 2002BP058 Accept 2002BU071 Accept 2002BP072 Accept 2002BU051 Accept 10-S1-1202-2 2002BP027 Accept 20021BU014 Accept 6-SI-1206-1 2002BP043 Accept 2002BU020 Accept 6-SI-1203-1 Page 14 of 19

ATTACHMENT 1 Inservice Inspection Report 3-1-2 Constellation Energy. P 0 Box 1475, Baltimore, MD 21203 Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 3 Plant Unit:

1

4. Owner Certificate of Authorization( If Req.)

N/A

5. Commercial Service Date:

5/08/1975

6. National Board Number for Unit.

20911 2002BU030 Accept 6-SI-1206-7 2002BP031 Accept 20021BU012 Accept 14-S1-1201-1 VALVE 1-SI-411 TO PIPE VALVE SI-441 TO TEE

PDI procedure not qualified to detect defects on the far side of single side access welds: far side examined to maximum extent achievable by approved PDI techniques This item may be considered for relief.

The PDI austenitic UT procedure not qualified to detect flaws on far side of single side access welds; 50% coverage is max credit allowed. Far side of weld examined to max extent possible by approved PDI techniques. Item may be considered for relief Exam Results' 20021BU009 Accept 2002BP028 Accept 2002BU073 Accept EXAM CATEGORY / ITEM NUMBER:

MAIN STEAM Summary/ID No 422050 Exam Results' Component ID 36-MS-1201-3 2002BM032 Accept 2002BU033 Accept EXAM CATEGORY I ITEM NUMBER:

MAIN STEAM C-F-2 / C5.51 Component Description PIPE TO VALVE 1-CV-4043 C-F-2 / C5.81 Summary/ID No 422300 Exam Results' 421350 Exam Results' Component ID 36-MS-1202-1/6-RV-4000 2002BP264 Accept 36-MS-1 201-1/6-RV-3992 2002BM033 Accept EXAM CATEGORY I ITEM NUMBER:

Containmen t Structures Component Description 6-IN. BRANCH CONNECTION BRANCH CONNECTION E-A I E1.11 Summary/ID No A10000 Exam Results' Component ID Liner Component Description All accessible areas Comments Overall Gen Visual Exam of Liner shows no evidence of damage or degradation. Areas identified are from mechanical means which have chipped/peeled coating not exposing the substrate.

2002VE001

1. Owner:

2. Plant:

Page 15 of 19 323850 Exam Results:

307400 Comments Comments

ATTACHMENT 1 Inservice Inspection Report 3-1-2

1. Owner:

Constellati

2. Plant:

Calvert Chf

3. Plant Unit:

1

4. Owner Certificate of Authonzation( If Req.)

N/A

5. Commercial Service Date:

5/08/1975

6. National Board Number for Unit.

20911 EXAM CATEGORY / ITEM NUMBER:

F-A / Fl.

SAFETY INJECTION on Energy, P.O Box 1475, Baltimore, MD 21203 fs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 10 Summarn/ID No 602500 Exam Results' 601600 Exam Results*

Component ID 12-SI-1011-R-8 2002BV128 Accept 12-SI-1009-R-4 2002BV129 Accept Component Description COMPONENT SUPPORT-SNUBBER COMPONENT SUPPORT-SNUBBER-C THERMAL Comments THIS EXAM WAS DONE AS AN ADDITIONAL EXAM DUE THE FAILURE OF LTP# 710200 (REF. REPORT NO 2002BV118)

THIS EXAM WAS DONE AS AN ADDITIONAL EXAM DUE TO THE FAILURE OF LTP# 710200 (REF.

REPORT NO.2002BV1 18)

Page 16 of 19

ATTACHMENT 1 Inservice Inspection Report 3-1-2 Constellation Energ.q, P 0 Box 1475. Baltimore, MD 21203 Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657 1

4 Owner Certificate of Authorizabon( If Req)

N/._A

5. Commercial Service Date:

5/0811975

6. National Board Number for Unit.

20911 F-A I F1.20 Summary/ID No 710150 Exam Results*

710250 Exam Results 709550 Exam Results*

710200 Exam Results, 705550 Exam Results:

703750 Exam Results-713350 Exam Results 701800 Exam Results 703325 Component ID 6-SI-1214-H-1 2002BV126 Accept 6-SI-1214-R-2 2002BV127 Accept 6-SI-1212 -R-9 2002BV117 Accept 6-SI-1214-R-1 2002BV1 18 Reject 10-SI-1206-H-6 2002BV020 Accept 14-SI-1211-H-9 2002BV013 Accept 3-SI-1201-H-12 2002BV133 Accept 18-SI-1203-H-2, R-1 2002BV100 Accept 14-SI-1204-R-1 Component Description COMPONENT SUPPORT COMPONENT SUPPORT-SNUBBER COMPONENT SUPPORT-SNUBBER; C THERMAL COMPONENT SUPPORT-SNUBBER;C THERMAL COMPONENT SUPPORT-SPRING; C THERMAL COMPONENT SUPPORT-SPRING;C THERMAL COMPONENT SUPPORT-SPRING,C THERMAL COMPONENT SUPPORT; A-ONE DIR COMPONENT SUPPORT; A-ONE DIR Comments THIS EXAM WAS DONE AS AN ADDITIONAL EXAM DUE TO THE FAILURE OF LTP# 710200.

(REF. REPORT NO. 2002BV118)

THIS EXAM WAS DONE AS AN ADDITIONAL EXAM DUE TO THE FAILURE OF LTP# 710200 (REF.

REPORT NO.2002BV1 18)

Snubber 1-52-60 has loose bolt at the pipe clamp. IR3 071-565 was written to address the problem; the loose bolt was corrected on the spot by snubber mechanic Additional exams were performed on LTP #s 601600, 602500, 710150, 710250.

BOTH SPRING CANS (COMPONENT SUPPORT)

SHOW 825# IN THE AS FOUND CONDITION THE +I 5% OF THE 825# IS WITHIN THE REFERENCE VALUE OF 800#.

Northeast side of component support shows misalignment; was measured with angle finder & found to be 40 off center. LEVEL II NOTE-Per engineenng the misalignment is acceptable.

Spacers on bottom section of restraint found to be installed on outside of clevis. IR3-076-471 written to address problem. Problem corrected under MO #

1200200946. Reinspected restraint after corrective action - Satisfactory Exam Results

1. Owner.

2. Plant:

3. Plant Unit:

Page 17of 19 EXAM CATEGORY I ITEM NUMBER:

SAFETY INJECTION

1. Owner.

2 Plant:

3. Plant Unit.

4. Owner Certificate of Authionzation( If Req) 5 Commercial Service Date:

6. National Board Number for Unit 2002BV017 Reject ATTACHMENT I Inservice Inspection Report 3-1-2 Constellation Energy. P.O Box 1475, Baltimore, MD 21203 Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk. Lusby, MD 20657 1

N/A 5/08/1975 20911 12-SI-1214-H-8 2002BV135 Accept 10-SI-1207-R-18 704100 Exam Results:

705700 Exam Results' 706400 Exam Results 703800 Exam Results*

705600 Exam Results*

706700 Exam Results*

708450 Exam Results 716100 Exam Results, 716150 Exam Results*

716200 Exam Results, 716250 Exam Results*

716350 Exam Results*

716500 Exam Results, COMPONENT SUPPORT; A-ONE DIR COMPONENT SUPPORT; A-ONE DIR Spring can setting is not within 5% of reference setting IR3-070-374 written. Spring can setting adjusted under MO#11200201709 and verified setting at 4250# on 5/21/2002.

OBSERVED CONCRETE SPALLING ON CEILING NEAR ATTACHMENT PLATE EAST SIDE, APPEARED TO BE PREVIOUS EXISTING CONDITION AS IT WAS PAINTED.

COMPONENT SUPPORT, A-ONE DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT, B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR COMPONENT SUPPORT; B-MULTI DIR Page 18 of 19 2002BV005 Accept 8-SI-1220-H-13 2002BV146 Accept 14-Sl-1211-R-7 2002BV012 Accept 10-SI-1206-R-4 2002BV021 Accept 8-SI-1221-H-4 2002BV147 Accept 6-SI-1210-A-1 2002BV116 Accept 2-SI-1212-S-1 2002BV007 Accept 2-SI-1212-S-2 2002BV008 Accept 2-SI-1212-S-3 2002BV010 Accept 2-SI-1212-S-4 2002BV009 Accept 2-SI-1215-S-1 2002BV003 Accept 2-SI-1215-S-4 2002BV006 Accept

ATTACHMENT 1 Inservice Inspection Report 3-1-2

1. Owner:

Constellation Enermy, P.O Box 1475, Baltimore, MD 21203

2. Plant:

Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Pk, Lusby, MD 20657

3. Plant Unit:

1

4. Owner Certificate of Authonzation( If Req)

N/A

5. Commercial Service Date.

5/0811975

6. National Board Number for Unit.

20911 702600 18-SI-1204-R-6, H-10 COMPONENT SUPPORT;A-ONE DIR Exam Results*

2002BV099 Accept 708700 6-SI-1211-H-17 COMPONENT SUPPORT;A-ONE DIR Exam Results 2002BV011 Accept 709700 6-SI-1213-A-1 COMPONENT SUPPORT;A-ONE DIR Exam Results 2002BV113 Accept 708800 6-SI-1211-R-13 COMPONENT SUPPORT;B-MULTI DIR Exam Results 2002BV014 Accept 710450 6-SI-1217-R-9 COMPONENT SUPPORT;B-MULTI DIR Exam Results*

2002BV131 Accept 713400 3-SI-1201-R-10 COMPONENT SUPPORT;B-MULTI DIR Exam Results 2002BV132 Accept 716400 2-SI-1215-S-2 COMPONENT SUPPORT,B-MULTI DIR Exam Results 2002BV004 Accept Page 19 of 19

ENCLOSURE (2)

ASME BOILER & PRESSURE VESSEL CODE SECTION XI, FORM NIS-2 Calvert Cliffs Nuclear Power Plant September 17,2002

2002-1 Class 1 and 2 NIS-2's Completed I MWO No.

R&R Number -

" UEI',,- *

Class,". Review Date 1199701954 98-1-186 lCKVSI-217 One 7/12/2002 1200001584 2000-1-077a 1CKVCVC-185 One 8/12/2002 1200001460 2000-1-104 1CV100E One 8/8/2002 1200005063 2001-1-010 1CV618 One 7/19/2002 1200005064 2001-1-011 1CV628 One 7/19/2002 1200004019 2001-1-012 1iCV638 One 7/19/2002 1200005065 2001-1-013 1CV648 One 7/19/2002 1200101169 2001-1-017 1RV469 One 7/17/2002 0199902341 2001-1-027 1#EB6-1008,R5 & H30 Two 7/15/2002 1200002465 2001-1-028 1HVMS-101 Two 7/1912002 1199900767 2001-1-031a 1HVSI-425 Two 8/8/2002 1199900767 2001-1-031b 1#DC2-1003 Two 8/8/2002 1200103259 2001-1-042 1PUMPRC11A(s)

One 7/31/2002 1200002904 2001-1-047 1#GC5-1008 Two 7/17/2002 1200003521 2001-1-049 1 PUMPRC1 1 B(s)

One 8/15/2002 1200003048 2001-1-054 1 HVRC-1 180 One 7/19/2002 1200104120 2001-1-056 1#GC7-1003 Two 6/26/2002 1200001173 2001-1-059a 1#EB-12 Two 8/9/2002 1200001173 2001-1-059b 1#EB-12 Two 8/8/2002 1200103157 2001-1-060 1#CC5-1003,A7 One 7/16/2002 1200003361 2001-1-064a 1HVSI-709 One 8/9/2002 1200003361 2001-1-064b 1HVSI-710 One 8/9/2002 1200003361 2001-1-064c 1#CC14-1004 One 7/19/2002 1200100808 2001-1-069 1CV3938 Two 7/15/2002 1200100809 2001-1-070 1CV3939 Two 7/12/2002 1200103303 2001-1-072 1CKVFW-130 Two 7/18/2002 1200101396 2001-1-075 1RV200 One 7/18/2002 1200101398 2001-1-076 1RV201 One 7/18/2002 1200101781 2001-1-077 1PZVRX11 One 7118/2002 1200000999 2001-1-079 lCKVSI-114 Two 7/31/2002 1200000998 2001-1-080 1CKVSI-124 Two 7/12/2002 1200000997 2001-1-081 1CKVSI-144 Two 7/17/2002 1199802485 2001-1-082 lCKVSI-227 One 7/17/2002 1200103149 2001-1-083 1CKVSI-237 One 7/17/2002 1200103150 2001-1-084 lCKVSI-247 One 7/15/2002 1200002340 2002-1-002a 1CKVCVC-186 One 7/25/2002 1200002340 2002-1-002b 1#CC5-1004 One 7/19/2002 1200200048 2002-1-003 1#EB6-1007 Two 7/16/2002 1199804734 2002-1-009 1CKVFW-133 Two 8/8/2002 1200201261 2002-1-017 1SYS083 Two

.7/19/2002 1200001375 2002-1-019a 1MOV4145 Two 8/8/2002 1200001375 2002-1-019c 1#HC3-1001,H13/RI2 Two 8/8/2002 1200201762 2002-1-024 1CV4150 Two 7/18/2002 S199601526 SG-1-001a 1HXRC1I1 One & Two 8/5/2002 S199601526 SG-1-001b 1#CC-1 One 811/2002 S199601526 SG-1-001c 1#DB-1/EB-1, -5 & -6 Two 8/1/2002 S199601526 SG-1-001d 1#CC-9, 1" & under One 8/1/2002 S199601526 SG-1-001e 1HXRC11SUP One & Two 8/1/2002 3199601526 SG-1-002a 1HXRC12 One & Two 8/1/2002 S199601526 SG-1-002b 1#CC-1 One 8/112002 S199601526 SG-1-002c 1#DB-1/EB-1, -5 & -6 Two 8/2/2002 S199601526 SG-1-002d 1#CC-9, 1" & under One 8/1/2002 S199601526 SG-1-002e IHXRC12SUP One & Two 8/1/2002 S199601526 SG-1-003 1#CC-9. 1" & under One 8/1/2002 SNUB POOL SNUB-0-002 *Snubber Pool 1, 2, & 3 6/21/2002 EPU Reference No. 2002-47-22-3292

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASIME Code Section Xl Calvert Cliffs Nuclear Power Plant, inc.

(name) 1650 Calvert Cliffs Parkway; Lusby,-MD 20657

-Date:

-7115/2002-Sheet I of 2 (address)

2. Plant:

C

'- -- caIvert Cliffs-Nuclear-Power P]ant'

__Uni (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 98-1-186, MWO No. 1199701954 (address)

(P.O. no,job noetc.)

D~it

Tye Code Symbol Stamp: N/A

-Calvert Cliffs Nuclear Power, Plant Dept.:- Tuth-oraioib*oa.r-P' N/A

3. Work Performed by:

-Clet(ae Author-ization tNoý.: N/A (name)

Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 SectionXI Class:

One (address)

4. Identification of System:

SystemNumber 052 System Name:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B16".5, 1968 Edition, Steel Pipe Flanges and Flanged Fittings NPS 1/2"-t 24"& Case N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Componet Manufacturer Valve Velan Enginnering Co.

Disc Velan Valve Corporatlon Manufacturers Serial Number SN: 0039 404387 SN: 7557 National Board No.

Other Identification I

NIA

1IA Reactor Coolant Loop Safety Injection Inlet Check Valve N/A Disc, Velan, 12 In. 1500 lb. Check Valve, ASME SA-182,Tp. F316, Drwg. 12124-0001, Item H3 ASME

Repaired, Code (ear Replaced, or Stamped luilt Replacement (Yes or No) 1975 Repalred/Repi_

No aced C

2002 Replacement No

7. Description of Work:

This plan was for rebuilding 1-CKVSI-217, and replacing valve disc.

8. Tests Conducted:

Hydrostatice[]

PneumaticZ Pressure:

N/.IA psi.

Nominal Operating Pressure.

Inservice' 0 Leakage: D Functional:[]

Test Temperature:

N/_.A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

.=

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

The replacement valve wedcqe/pluql/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp.

N/A Certificate of Authorization No.: N/A Expiration Date N/A Charles H Ballard Signed:

Engineering Technician Date:

7/15/2002 S-

"Owned/oi*wn-er's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

/

to

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report m accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

NatonlComissions:

1J3d2, Stat,7.'. En m e Inspeco'/intr National Board, State~and Endorsements Date _

200Z_

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

-bL" ier-

.~--Calvert Cliffs Nuclear Power Plant,-Inc.?,

b 8 /12 /2 00 2 S.

~ ~(name) 1650 Calvert Cliffs Parkway;m LusbyMD 20657 Sheet 1 of-2 (address)

2. Plant:

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power-Plant Dept.

- (name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address) -

Unit:

One R&R No. 2000-1-077a, MWO No. 1200001584 (P.O no,job no, etc.)

Type Code Symbol Stamp:.N/A

-Authorization No.:- N/A Exp Date: N/A Section XI Class:

One

-4. Identification of System:" SystemNumber " 041 Sys'temName:

Chemical Volume Conitrol ystem Name

5. (a) Applicable Construction Code and Class:

ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970 Add; Class One-(b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name bf Name of Componet Manufacturer Manufacturers Serial Number National Board No.

1998 Edition

, Other Identification ASME

Repaired, Code Year: Replaced, oi Stamped Built-Replacemen (Yes or No)

Bechtel Valve Velan Engineering Co.

2091-NI 90585-GX SN:

951037-2 NIA N11 Regen. Heat Exch. Check Valve to #11 Pressurizer Aux.

Spray N/A Valve, Check, 2 in. SA-182, Tp F1316, 2680 Ib.,Socketweld, Velan Dwg 12968-0138 JYi"

epairewepi x es Jyja I RepaireduRepi

,aced 1994 Replacement

7. Description of Work:

This plan was for the work that replaced 1-CKVCVC-1 85, #11 Regenerative Heat Exchanger Check Valve to

11 Pressurizer Auxiliary Spray.

8. Tests Conducted:

Hydrostatic.r"]

PneumaticcI Pressure:

2250 psi.

Nominal Operating Pressure-Inservice" E]

Leakage. RJ Functional E]

Test Temperature:

530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Valve N es No

Sheet 2 of 2 FORM NIS-2 -(Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section Xl'required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Recq.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReplacement conforns to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineehiig Technician Date:

8/12/2002 Owner orOwner`

Ttle Certificate of Iniservice Ins pection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z-- /3-

_.Z-to d--

o -

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

S By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

_,26 4

-L n

t g

rt BCommissions:

/1 3 8Z2

, AAJZ S

a ld E

9do eme InspNational Board, State, a~d Endorsements D a

,200-Z..

- C DATA PACKAGE NO.

951037 P.6 FORM NPV-I.CER-I ICATE HOLDERS' DATA -REPO UCLEAR-PUMPS OR VALVES,

1. Manufactured and certified by-VELAN INC. 2125 WARD AVE, MTL. CANAA

-A (name and address of N Certficate Holder)

2. Manufactured for

-',BALTIMORE GAS & ELECTRIC 'P.O.

BOX 1472 BALTIMOREyMD. -21203 (name and address of purchaser).

3.--Locati-on of-nstaliio-n CALVERT CLIFFSNUJCLEAR PLANT NORTH OF LUSBY, MD.

20657 S........

~~~~~(name and address).

4. Model No., Series No., or Type: PS.CHECK Drawing P1-76800-N28 Rev D

CRN N/A S.-ASME Code,Section III, Division 1:.

1989 ------- NONE 1

N/A (edition)

(addenda date)

(class)

(Code Case no

6.

Pump or valve VALVE Nominal inlet size 2"

Outlet size 2"

7. Material:-Body--SA-182,F316-Bonnet SA-182;*F316"-Disk-COLMONOY 4 Bolting-_NA..

(a) -...

Cert.

Holder's

-Serial No.-

951037-1 951037-2 951037-3 (b)

(c)

Nat'l

-.Body Board

-Serial

,No No.

N/A F

(d)

Bonnet

Seri al.

No.-

H/C: CH H/C: 1lARA It

_ t It I

(e)

Disk

.- -Serial No. -

'H/C:

2072

'7 It

= = =-~=====-

. =

Supple-menal information in form of listsa,-sketche~s, or drawings rra*, be used provided (1) size is 8 112 x 11., (2) inform'ation in item's I thruough 4 on this-Data Report is included on each sheet, (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

(12188)

This form (E00037) may be obtained from the Order Dept., ASME, 22 LAW DRIVE< BOX 2300 Fairfield, NJ 07007-2300.

-1 1

- I I

FORM NPV-1 (Back--

Pg. 2 of 2

)

7 P.7-,

8. Design-conditions 6430 psi 100 OF or valve pressure class 2680 (1)

(pressure)

(temperatuire 9.-Cold working pressure 6430-psir at 100*F.

10. Hydrostatic test 10050 psi. Disk differential test pressure 7375 psi

11. Remarks:

MATERIALS MEET ASME SECTION II EDITION: 1989 ADDENDA:

NONE CERTIFICATE OF DESIGN Design Specification certified by J.M.

FARREL P'.E. State QUE Reg. no.

30039 Design report certified by S.

ISBITSKY P.E. State CUE Reg. no.

22115 CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this piump or valve conforms to the rules for construction of the ASMECode,Section III, Division 1.

N Certificate of Authorization-No.

N-2797-1 M

2,98 Date MAY 2 6 1995 Name VELAN INC.

Signed

~(N Certificate Holder)

(aubo resematve)

"CERTIFICATE OF INSPECTION I,

the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of QUEBEC and employed by PROVINCE of QUEBEC have-inspected the pump, or valve, described in this Data Report on Y,(-e-l/-

, and state that-to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or

valve, in accordance with the ASME Code, Section-III, Division 1.

By signing this certificate, neither the inspector nor his employer makes any warrenty, expressed or

implied, concerning the component described in this Data Report.

Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Date 9S-O.-

signed7s omisn S(Nat'l.

Bd. (inc. endorsments) and state or prov. and no.)

(1) For manually operated valves only.

PAYMON. LAUZON

G'. -U EATJ]YENT Du OUt1EC

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner:

-Calvet Cliffs-Nuclear-Power Plant, Inc.'

(name)

Date:-

81812002.

Q:h~a t,*f 0 IrJU %AjIVtI L

a-1I11I r

IFVV43, Cal

.'-(address)s

-,Calvert Cliffs -NucledrPd*er Plant....

.t-.

-One 0

-e.

--II'59 iClvertcliffs Pa.rkway-; Lusby,-MD 20657 R&R No. 200b:1'l-d4, ;'MWO No:,1200O01460 -:--,

(address)

(P.O. no ;job no, etc.)

3. -Work Performe by: -Calvert Cliffs Nuclear-Power Plant Dept Type.Code Synb Stamp: N/A (nme

-Wr Proreib.thorizationiNo6::

N/AK-

-~~(name)

Exp Date: N/A 1R165 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

One (address)

-4. Identification of System:

System Number 064 SystemName:

Re actor-Coolant Systemi 5.(a) Applicable Construction Codeand Class:

ASME B31.1.0 1967.Editioni CCases N-2,-N-1 0 -"_..'-

--(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufacturer Manufacturers Serial Number National "Other Board No.

Identification ASME

Repaired, Code Year -Replaced, o0 'Stamped Built "Replacemen (Yes or No)

Valve ITT Hammel Dahl 69-4126-001 Flowserve 400322 SN; D909A Corporation 1-2 Pipe Cap DuBose National Energy Services Inc.

Plug Neles Jamesbury 10486-GX Heat Code: HTK 82350-GX Ht.

B7722H N/A

IA Pressurizer Spray Control 1975 Valve NIA Bonnet, Bellows, 3 In. 1500 lb.

2000 ITT Hammel-Dahl Angle Valve, Drwg. #12121-0006, Item #2

- N/A Cap, Pipe, 112 in., 3000 lb. SW, 1996 ASME SA-182, Tp. 316 N/A Plug for 3 in. 1500 lb. ITT 1993 Hammel-Dahl Angle Valve, Drwg.

12121-0006, Item #6

7. Description of Work:

This plan was for the rebuilding and replacement of the Bonnet and Plug on 1-CV-1ODE, which is #11A Pressurizer Spray Control Valve.

8. Tests Conducted:

Hydrostatic:"]

Pneumatic Pressure:

2250 psi.

Nominal Operating Pressure-Inservice. 0 Leakage: R Functional:[]

Test Temperature:

530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Bonnet RepaIred/Rep!

No Repaired/Repl

- aced Replacement Replacement Replacement No No No No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

A Section XI Surface Examination of the affected component was performed to satisy SectioriXI Pre-Service Requirements.

Applicable Manufacturer's Data Reports to be Attached ert ate ofComphance....

We certify that the statements made in this report are correct and that this RepiirIReplacement conforms to the rules ofthe ASME Code, SectionXI.....

- Type Code Symbol Stamp:- -N/A..

Certificate of Authorization No.: N/A Expiration late:

N/A Charles H. Ballard Signed:

Engineering Technician Date:

8/8/2002 Oner's Designee, Title Certificate'of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components descnbed in this Owner's Report during the period iZ-/7-t0/

to 7-/11*,i02-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described m this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

l Inspector'Signature National Board, State, and Endorsements Dat x

1 200 _-

I

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions o'f the ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

Date:-.719/2002 (name) 1650 Calvert Cliffs Parkway;, Lusby, MD, 20657

.(address)..

2. Plant:

Calvert Cliffs Nuclear Power Plant.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performedby:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657, Sheet 1 of 2 Unit:

. One R&R No. 2001-1-010, MWO No. 1200005063 (P.O. no,job no., etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:

One (address)

I

4. Identification of System:

System Number 052 SystemName:

Safety Injection

5. (a) Applicable Construction Code and Class:

ASME B31.1.0 1967 Edition, CCases N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement

.1998 Edition

6. Identification of Components Repaired or Replacediand Repla~cement Components:

ASME

Repaired, Code I Name of Name of.

Manufacturers, National -

Other Year Replaced, oi :Stamped' Componet Manufacturer Serial Number Board No.

Ideritification Built Replacemen (Yes or No)

Valve ITT Hammel-Dahl H5624 N/A

11A Safety Injection Tank,

- 1974 Repaired/RepI No Plug Assembly Flowserve Corporation 400322 Ht.#: 724770 Reactor Safeguards Check Valve leakage drain CV to R.W.T.

N/A Plug & Stem Ass. 1 In. 1500 lb.

2000 ITT Hammel-Dahl Unbalanced Globe Valve, Drwg. #12121-0013, Item #6 acedmen Replacement No

7. Description of Work:

This plan was for the rebuilding of 1-CV-618, #11A Safety Injection Tank, Reactor Safeguards Check-Valve leakage drain to R.W.T.

8. Tests Conducted:

Hydrostatic.[]

Pneumaticl]

Pressure:

N/A psi.

Nominal Operating Pressure:

Inservice: M Leakage. E]

Functional E]

Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

The replacement valve wedge/plug/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A SCharles H. Ballard Signed:

_Engineering Technician Date:

7/19/2002

¢"'Owner or Owner's Disifne, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period /.-/O-'/

to G--2.) -Q')..

and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

XCommiissions:

/23 e8Z2-rf

)

-AJ AI1 W-6 7 Im~pbs-SignaureNational Board, State, and fndorsements Date:*:LZ_

2002_

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Ownr:

Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 S..(address)

.'2.- Plant'

',Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 "Date: -"7/19/2002 Sheet 1 of 2 Unit:

One

_ -,u-;-- -

R&R No. 2001-1-011, MWO No. 1200005064 (address)

3. WorkPerformedby.

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (P.O no,job no, etc)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:

One (address)

4. Identification of System:

System Number 052

.,SystemName:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B31.1.0 1967 Edition, CCases N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components R6epaired or Replaced an'd Replacement Components:

Name of Name of, Componet Manufacturer Manufacturers National Serial Number,'

Board No.

"Identification ASME "Repaired, Code Year Replaced, oi Stamped Built Replacemen (Yes or No)

Valve ITT Hammel-Dahl SN: 83839D1A004 Flowserve 400322 H1.#: 724770 Corporation

ý I N/A

11B Safety Injection Tank, Reactor Safeguards Check Valve leakage drain CV to R.W.T..

N/A Plug & Stem Ass. 1 In. 1500 lb.

ITT Hammel-Dahl Unbalanced Globe Valve, Drwg. #12121-0013, Item #6 1974 Repalred/Repl aced 2000 Replacement

7. Description of Work:

This plan was for the rebuilding of 1-CV-628, #11 B Safety Injection Tank, Reactor Safeguards'Check Valve leakage drain to R.W.T.

8. Tests Conducted-Hydrostatic--]

Pneumaticl" Pressure:

N/A psi.

Nominal Operating Pressure.

Inservice: [J Leakage: E]

Functional: E]

Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Plug Assembly No No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

The replacement valve wedcqe/pluqldiscltrim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance.

We certify that the statementf made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

NIA Certificate of Authorization No.: N/A Expiration Date:

N/A

- - S*/Charles H. Ballard Signed:

Engineering Technician Date:

7/19/2002 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period /.-/d

-0/

to S-e..7-O7_

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

(i

~

~~~Commissions: Atý'822c6,+A 1'z

,,1~~*

Inspector's Signature National Board, State, and Endorsements DteS 200 -..

I/

X-

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

"--Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)--

2. Plant:

--- -Calvert Cliffs Nuclear PowerPlant:

(name) -

1650 Calvert Cliffs Parkway; Lusby, MD 20657

--Date: -711912002 "Sheet I of 2 Unit:

- One R&R No. 2001-1-012, MWO No. 1200004019 (address)

-, (P.O no., job no., etc )

Calvert Cliffs Nuclear Power Plant Dept.

-Type Code Symbol Stamp: N/A

3. Work Performed by:

(Authorization No.: N/A (m--,,

-ExpDate:'N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657

\\SectionXI Class:

One (address)

4. Identification of System:

System Number 052 System Name:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B31.1.0 1967 Edition, CCases N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification'of Components Repaired or Replaced ard Replacernent Components:

-f Name of I Name of Componet

'Manufacturer Manutacturers Serial Number IN ational Board No.

u.ner Identification Siear

.Built S"

ASME Repaired,,

Code "Replaced, oi Stamped Replacemen (Yes or No)

Valve ITT Hammel-Dahl SN: 83839-005 Plug Assembly Flowserve Corporation 400322 Ht.#: 724770 N/A t#12A Safety Injection Tank, 1974 Reactor Safeguards Check Valve leakage drain CV to R.W.T.

N/A Plug & Stem Ass. 1 In. 1500 lb.

2000 ITT Hammel-Dahl Unbalanced Globe Valve, Drwg. #12121-0013, Item #6 Repalred/Repi

'No acedc Replacement No

7. Descnption of Work:

This plan was for the rebuilding of the #12A Safety Injection Tank, Reactor Safeguards Check Valve leakage drain 1-CV-638 to R.W.T.

8. Tests Conducted:

Hydrostatic:[]

Pneumatic']

Pressure:

N/.._A psi.

Nominal Operating Pressure:

Inservice- ]

Leakage:E]

Functional LI Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

The replacement valve wedqe/pluQfdisc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this -Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

N Engineering Technician Date:

7/19/2002 Owner or Owneres De'indr Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described mn this Owner's Report during the period /2-10 -6/

to S--_.)-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Ieos SinaueNtoaBarComEissions:

AAor>

Inspe ~or's Signature National Board, State, and Endorsements Date Z5 200.Z-

/6/

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of tIhe-ASME Code Section XI

1. Owner:

§'-

CalVert Cliffs-N'uclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657.

(address)

,, r,=.:'

Calvert Cliffs Nuclear Power Plant L.

ri

.L" (name)

R&F 1650 Calvert Cliffs Parkway; Lusby, MD 20657

-.Date: -, 711912002

,- Sheet 1 of 2

--_Unit: "* One Z No. 2001-1-013, MWO No. 1200005065 (address)

3. WorkPerformedby:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (P 0. no,job no, etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A "1Exp Date: N/AA Section XI Class:

One (address)

4. Identification of System:

System Number 052 SystemName:

Safety Injection

5. (a) Applicable Construction Code and Class:

ASME B331.1.0 1967 Edition, CCases N-2, N-1 0 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998-Edition

6. Identification of Components Repaired or Replaced and Replacement Components:!

Name of

_Name of Componet Manufacturer Manufacturers Serial Number

-National Board No.

'Other Identification ASME Yer

Repaired, Code

--yer -Replaced,ol "Stamped "Built Replacemen (Yes or No)

Valve ITT Hammel-Dahl Flowserve Corporation 1-CV-648 400322 Ht.#: 724770 N/A

'112B Safety Injection Tank, 1974 Reactor Safeguards Check Valve leakage drain CV to R.W.T.

N/A Plug & Stem Ass. 1 In. 1500 lb. __

2000 ITT Hammel-Dahl Unbalanced Globe Valve, Drwg. #12121-0013, Item #16

7. Description of Work:

This plan was for the rebuilding of 1-CV-648, #12B Safety Injection Tank, Reactor Safeguards Check Valve leakage drain to R.W.T.

8. Tests Conducted:

Hydrostatic']

Pneumatic]

Pressure:

N/_A psi.

Nominal Operating Pressure.

Inservice" I]

Leakage: El Functional: El Test Temperature:

N/_A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Plug Assembly Repalredr*ep,

-aced Replacement

'N, No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section X1 Pre-Service NDE was performed in support of this activity.

The replacement valve wedge/plug/disc/trim received a Construction Code Surface Examination at the request of the resident ANJI.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A 7/JI Charles H. Ballard Signed:

Engineering Technician Date:

7/19/2002 Owner or Ownirs Lresignee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

/ 2--/A

-0) /

to

--0 2

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

s S

Naý o

ssiont onal oaZr, 4xa-:r and*do4re Inspecto/s Signature National Board, State, and Endorsements Date:

L4,+.ZS-200 Z.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.-

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Date:

711712002 Sheet I of 2 (address)

2. Plant:

Calvert Cliffs Nuclear Power Plant-unit:

-One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2001-1-017, MWO No. 1200101169 (address)

(P.O. no,job no., etc)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

Type Code Symbol Stamp: N/A (name)

Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XIClass:_

- One (address)

4. Identification of System:

SystemNumber 052 SystemName:

Safety Injection

5. (a) Applicable Construction Code and Class:

ASME B&PV Code Sect. Iii, 1971 Edition, Class One (b) Applicable Sect XU Ed. for Repairs/Replacement

,1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturers National Other Componet' Manufacturer, Serial Number-B6oad No.'

Identification ASME

'Repaired,

-Code Year 'Replaiced, oi Stamped Built Replacemen (Yes or No)

Crosby Valve &

SN: N55296-01-0032 Gage Co.

BGE CCNPP Shops 1199804699 SN:

N55296-01-0009 N/A:'

Shutdown'Cooling Containment - - 1973 Side Return Header Relief Valve N/A Valve, Relief, Nozzle Type, 3/4 In.

2000 X I In., Style JR-WR-S Type B,--

Item on Drwg.#12791-0007.

"Unlt#1 Repaired/Repl aced+

Replacement Yes Yes

7. Description of Work:

This plan was for-the replacement of 1-RV-469 which is the Shutdown Cooling Containment Side-Return i Header Relief Valve.

8. 'Tests Conducted:

Hydrostatic-[]

PneumaticOl Pressure:

4 psi.

Nominal Operating Pressure:

Inservice: El Leakage: 2 Functional:E]

Test Temperature:

83-Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Valve Valve, Relief

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditlons listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineenng Technician Date:

7/17/2002 Owner or Owner's'Desgn ee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period 6,- /-OL to

,-.ZS-CZ..-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

)t aNtnoCommissions: A/-3 St ae' aAZ E1ren 4 '

Inspector Srigature National Board, State, adtd Endorsements Date:G "

I 200 Z.

I-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

(name),

1650 Calvert Cliffs Parkway; Lusby, MD 20657 --

(address)

SCalvert Cliffs Nuclear Power Plant

2. Plantm I

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

Work Performed by:Calvert Cliffs Nuclear Power Plant D

3. Wr efre y

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Date:

711512002 Sheet I of 2 Unit:

. One R&R No. 2001-1-027, MWO No. 0199902341 i

I (P.O no job no, etc) ept.

Type Code Symbol Stamp: N/A Authorization No.: N/A "Ecp Dite: N/A Section XIClass:

Two (address)

4. Identification of System:

SystemNumber 083

-System Name:

Main Steam & SG Blowdown I

5.(a) Applicable Construction Code and Class:

ASME B31.1.0 '1967 Edition, 1972 Add (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification -f Comporiehts Repaired or Re'placed and Replacement Cornponents-:

Name of Name of

- Manufacturers National Other.

Componet

- Mafiufacturer -.

Serial Number Board No. -

Identification 998 Edition

Repaired, Year Replaced, or Built Replacement 1#EB-6-1008,RS &

H30 N/A

12 Steam Generator Bottom Blowdown Piping 1975 Repaired/Repl I aced

7. Description of Work:

This Repair Plan was for the work that was required to correct a problem that was dicovered between an as built and an as analyzed state of 2"EB-6-1008, which isthe #12 Steam Generator Bottom Blowdogvh Piping:

Because of these findings, it was necessary for the supports at location 30 and location 5 be corrected to match design doc.FSK-MP-0655 REV. 10.

8. Tests Conducted:

Hydrostatic:[-]

PneumaticS]

Pressure:

N/.A psi.

Nominal Operating Pressure:

Inservice []

Leakage: []

Functional LI Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Pipe Support Bechtel ASME Code Stamped (Yes or No)

No

.~

I

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was Performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineering Technician Date:

7/15/2002 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components descnbed in this Owner's Report during the period &-/1

-01 to S,--"Z.-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described m this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

A 4&aCommissions:

Boar, SteJ, a P*nr 92e7t sp~tes e iv~treý

ýNational Board, State, and t~ndorsements; S~200 Z..

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

- Calvert Cliffs Nuclear Power Plant, Inc.,

1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

Calvert Cliffs Nuclear Power Plant (name)

2. Plant:

1650 Calvert Cliffs Parkway; Lusby, MD 20657

-Date.

7/19/2002 Sheet 1 of 2 Unit:

One "RFi&R No. 2001-1-0228, MWO No. 1200002465 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power (name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (P.O. no,job no, etc) r Plant Dept.

Type Code Symbol Stamp: N/A Auth6rization No." N/A Exp Date: N/A Section XI Class:

Two (address)

4. Identification of System:'

SystemNumber 083,-

SystemName:'

Main Steam & SG Blowdown 5.(a) Applicable Construction Code and Class:

ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970

-Add; Class Two, CCase 1427 A,

4 (b) Applicable Sect XI Ed.,for Re'pairs/Replacement

-1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name'of Name of Manufacturers National -

th Componet Manufacturer Serial Number Board No.

Identifi ASME

Repaired, Code "Year Replaced, oi, Stamped Built -ReplacemenT (Yes or No) er cation Valve Velan Englnnering Co.

1268 N/A'

- #11 Steam Generator -

" 1975

.-Atmospheric Dump Manual Isolation Valve Repaired/Repi No aced

7. D'escription 6fWork:

This plan was for the replair work to the steam cUtsthat were on the sealing surfaces of the bonnet of 1 HVMS-101, #11 Steam Generator Atmospheric Dump Manual Isolation Valve'. -

I

8. Tests Conducted:

Hydrostatic--

Pneumati-l Nominal Operating Pressure: -

iseirvie I l Leakage:

Funtional Pressure:

880 psi.

Test Temperature:

530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Re-g.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A SACharles H. Ballard Signed:

Engineenng Technician Date:

7/19/2002

'~Owner or Ow-niers Dfi-inee, titl Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period 6-/0-0/2 to 7-/17-0 Z.

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section X.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

nspectors S/naurNtn Commissions:

/,

St and EdrZ ments Inspector's Signature National Board, State, and 6dorsemnents Date2 200 Z-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

.-Calrert Cliffs Nuclear-P6wer P lant, Inc.

-- Date'

-- 8/812002

"(name).

1650 Caliv'ert Cliffs Parkway; Lusby, MD 20657:

Sheet I f2

-6 (address)

2. ;Pan""

-Calvert-Cliffs Nuclear Power Plaht OUnitn:.One (name)~---------------

1650 Calvert'Cliffs Parkway; Lusby, MD 20657 R&R No. 2001-1-031a. MWO No. 1199900767

""-(address)

(P.O. no,job no, etc)

3. Work Performedb :Calvert Cliffs Nuclear Power Plant Dept.--

Type Code Symbol Stamp: N/A (n ame)

PefrmAuthorization No.: --N/A

~ ~~~(name)

Exp Date" N/A:

1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

Two

-(address)

4. Identification of System:

SystemNumber 052 -

SystemName:

Safety_ ectin" 5.(a) Applicable Construction Code and Class:

ASME B&PV Code Sect. III, 1989 Edition, Class One (b) Applicable Sect XI Ed. for Repairs/Replacement

°1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of N

Name of Comnponet Manufacturer Manufacturers Serial Number National Board No.

"Other

-Identification "'

ASME

Repaired, Code Y'ear Replaced, oi Stamped

'Built Replacemen (Yes or No)

Valve Velan Englnnering 1568 Co.'

Globe valve ' Velan Engineering Co.

90585-GX SN:

941143-2 N/A

13 TIPSI Pumlp Mini Flow Isolation Valve N/A

,Valve, Globe, 2 In, 1690 lb.,

ASME SA-182 Tp. F316, per Drawing 12968-0134, Item 129.

1991 Repaired/Repl Yes aced 1994 Replacement Yes

7. Description of Work:

This plan is for the replacement of I-HVSI 425, #13 HPSI Pump Mini Flow Isolation Valve.

8. Tests Conducted:

Hydrostatic E]

PneumaticZi]

Nominal Operating Pressure:

Inservice. ED Leakage. R Functional LI Pressure:

1300 psi.

Test Temperature:

8.2 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Reg.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineering Technician Date:

8/8/2002 Owner or Ownrs Dsgnee,Tie Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period,/6-ZV-to 7- / 7-d Z.-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

&Commissions:

A1LA 2Z,&4 4/A.'-

A6 K4ý'

Inspector's Signature National Board, State, Snd Endorsements Da2e 2O0

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

. Owner::

Caliert CliffsNuclar Pcwe-r P

-lantnc.

Date

.81812002 i --.

.` (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2

.t-.

.4, P a t -

.C a lv e rt C h ff s uc e

a r P o w e -r -P la n t

. n

-- "-2. Plant:Z~

C. v nt..-ne<

17:

(name) 1650Calvert Cliffs Parkway;-Lusby, MD 20657 R&R No2001--31b MWO No. 1199900767 (address)

(P.O. no., job no, etc)

"-"Calvert Cliffs Nuclear Power Plant Dept.

-Type-

-e...b Stamp: NI A

3. Work Performed by.

Authorization No.: N/A (name)

Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

Two

-.L.

(address) 4.' Identification of System: SystemNumber. 052 - :SystemNaie": -"-'Safety Ifijection 5.(a) Applicable'Construction Code and Class:

ASME B331.7-1969 Edition; Summer 1971 Add; Class Two, - -.

(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: -

Name of Name of Componet Mamifacturer Manufacturers Serial Number National Board No.

Other Identification ASME

Repaired, Code

'Year Replaced, ot Stamped Built "Replacemen (Yes or No)

Bechtel 2"DC-2-1003 N/A Sa'ndvik Steel Inc.

F-5630 Heat#496481 N/A Reducing Insert DuBose National Energy Services Inc.-

Coupling DuBose National Energy Services Inc.

54906-GX Heat Code: FTY 54906-GX Heat Code: FUY

13 HPSI Pump Mini Flow'piping " 1975 Repaired/Repl aced

-Pipe, 2 in. Sch. 80, Stainless Steel, 1977 SA-376, TP-304 Reducer Insert, 2 in. X 1 in.,

1992 30001b, Socketweld, SA-182, F304 Coupling, 2 in., 3000 lb.,ASME 1992 SA-182, Tp. F304, Socketweld Replacement Replacement Replacement

7. D eiscript-ion of Work:

This plan was for the support work and material needed to replace I-HVSI 425, #13 HPSI Pump Mini Flow Isolation Valve.

8. Tests Conducted:

Hydrostatic [

Pneumatics]

Pressure:

1300 psi.

Nominal Operating Pressure:

Inservice" []

Leakage:2]

Functional:f]

Test Temperature:

L2 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Piping System Pipe No No No No No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Re-q.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date: N/A

~

Charles H. Ballard Signed:

~

4JEngineering Technician Date:

8/8/2002 Owner or Owner's 1-*eignee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

/-

to 7-/ 7-0 Z-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

"k ý In to'sgt Commissions-AIR ona aAS.Z, nd 6

Edrmn Inspectlor's Signature National Board, State, and Endorsements Date 200 7-

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the, ASME Code Section XI

".-Ow"er:'

Calvdrt'Cliffs Nucilear'Power Plant, Inc.

"(name)

"1650 Calvert Cliffs Parkway; -Lusby, MD-20657:

2. Plant:

Calvert Cliffs Nuclear Power Plant (name)

"Date:

7/3112002.

Sheet1 lof 2

- Unit:"

One" 1650'Calvert Cl'iffs Parkvv`y; Lusby, MD -20657 R&R (address)

Calvert Cliffs Nuclear Power Plant Dept.

3. Work Performed by:

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 No. 2001-1-042, MWO No. 1200103259 (P.O. no,job no, etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Cla ss:

One (address)

-4.-Identifiition'ofSystem:.

SystemNumber 064

.SystemName:

Reactor Coolant System 5.(a) Applicable Construction Code and Class:

ASME B&PV Code Sect. III, 1983 Edition, Summer 1983 Add; Adc 1998 Edition e"

(b) Applicable Sect XI Ed. for Repairs/Replacement 199....io

6. Identification 6f Components Repaired or Replaced and Replacement Components:

-Name of Componet Name of Manufacturers.

National Manufacturer Serial Number Board No.

, Other Identification

'Repaired, Year Replaced, oi Built Replacemen RCP Seal Sulzer Bingham Inc.

Seal

_BGE CCNPP Shops IC866 1199700104 SN:

1C872 NB 1238

11AReactor Coolant Pump 1988 Mechanical Seal.

NB 1239 Seal, Cartridge Assembly (RCP) 2000 "875B-3V Complete Sulzer Blngham per FCR87-0074

7. Description of Work:

This-plah Was for the-replacementof the mechanical seal on #11 A ReactorCoolant Pump.-

8. Tests Conducted:

Hydrostatic'-

Pneumatic[

Pressure:

2250 psi.

Nominal Operating Pressure:

Inservice: []

Leakage:&]

Functional:E]

Test Temperature:

530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

ASME Code Stamped (Yes or No)

Repaired/RepI Yes

" Repaired/Repi aced Replacement Yes Yes

I Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A

- 'e I

Charles H. Ballard Signed:

c Engineenng Technician Date:

7/31/2002 ner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period c5-/ 4/- dl to 7-/1-O2-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures descnbed in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

" -- t inaCommissions:

Natna Bard

.,n Edrm

ýn~s~to~s SgnaureNational Board, State, 'and Endorsements S

y 7

200 Z.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

Date:

711712002

- -(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Unit:

One R&RNo. 2001-1-047, MWO No. 1200002904 (address)

(P.O no,job no, etc)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

Type Code Symbol Stamp: N/A Authorization No.: -N/A (name)

"Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

Two (address)

4. Identification of System:

System Number 052-1 SystemiName:

-. SafetyI njection

5. (a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class Two (b) Applicable Sect XI Ed. for Repairs/Replacement

'1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name'of Componet ' Manufacturer

-Manufacturers'

-'National Serial Number Board No.

Other Identification I --

A S M E

Repaired, Code Year Replaced, oi Stamped

'Built Replacemen (Yes or No)

Piping System '

Bechtel Pipe Energy & Process 99 Corporation Reducer, 2" X DuBose National 5490 3/4" Energy Services Inc.

Tee, 2", SA-182

'DuBose National 549 Energy Services Inc.

2"GC5-1008 N/A Shutdown Cooling Header Vent 1975 Repaired/Repl Assembly aced 883-GX Ht#

N/A Pipe, 2 ln. Sch.40, ASME SA-

.1995' Replacement 438523 376, TP-304 06-GX Ht# FNJ N/A Reducer, Insert, 2" X 3/4", ASME 1992 Replacement SA-182, F304, Socket Weld,

3000, Class 1,ANSI B16.11, 06-GX Ht# NN NIA Tee, 2", ASME SA-182, F304, 11992

-Replacement Socket Weld, #3000, Class 1, ANSI B16.11

7. Description ofWork:---

This plan was for the installation of a new Shutdown Cooling Header Vent/Valve Assembly on the'2" GC-5 1008.

8. Tests Conducted:

Hydrostatic.]

Pneumatic]

Pressure:

102 psi.

Nominal Operating Pressure Inservice: E]

Leakage W Functional: L Test Temperature:

.8 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

2. Plant:

No No No No No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section Xl required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Req.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Fe-Engineenng Technician Date.

7/17/2002 Owner or Owners Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described m this Owner's Report during the period Z6 - / - Q /

to

' -- '- 0?-, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report m accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, conceming the examinations and corrective measures described m this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

AA2 1A.)

t ns ure National Board, Statt, and Endorsements S200 L.

FORM NIS-2 OWNER'S REPORT-FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the AS ME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

(name)

Dat:

8/1512002 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)..

2. Plant:

"Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)

Unit:

One R&R No. 2001-1-049, MWO No. 1200003521 (P.O. no.,job no,etc.)

"- Type Code Symbol Stamp: N/A Authorization No.: N/A

,Exp Date: N/A Section XI Class:

One

4. Identification of System: _ System Number - 064 SystemName:

Reactor Coolant System 5.(a) Applicable Construction Code and Class:

ASME B&PV Code Sect. III, 1983 Edition, Summer 1983 Add;

-. Class One -.....

(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufacturer

-.Manufacturers' Serial Number National Board No.

Other Identification'

"-ASME "Repaired, Code Year 'Replaced, 01' Stamped Built. Replacemen (Yes or No)

RCP Seal Sulzer Blngham 1C863 Inc.

Seal BGE CCNPP Shops 0199602107 SN:

I, I-1 C870 NB 1249 11B Reactor Coolant Pump Mechanical Seal.

N/A Seal, Cartridge Assembly (RCP) 875B-3V Complete Sulzer Bingham per FCR 87-0074 1988 Repaired/RepI Yes 1988 Repaired/Repl aced

-- 2001

, ReplaCement

7. Description of Work:

This plan was for the replacement of the mechanical seal on #11 B Reactor Coolant Pump.`_

8. Tests Conducted:

Hydrostatic:[:]

Pneumatic{Zl Pressure:

2250 psi.

Nominal Operating Pressure Inservice: []

Leakage R Functional [

Test Temperature:

53.

Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

Yes Yes

9I Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliancee We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

NIA Certificate of Authorization No.: N/A Expiration Date:

N/A Signed:*

Charles H. Ballard Signed:

Engineering Technician Date:

8/15/2002 Owner or Ow~ner's De'i-grie, Tit e Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

?- zo

- O ( to 7_-,__-o_

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described m this Owner's Report in accordance with the requhiements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Inspet/or's Signature National Board, Stat,* and Endorsements Date "11.12,

-200Z-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner:

Calvert Cliffs Nucle-arPPower Plant, Inc.

Date: --7/19/2002-1650 Calvert Cliffs Parkway; -Lusby, MD -20657

- (address)

Calvert Cliffs Nuclear Power Plant

2. Plant:

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. WorkPerformedby:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway,- Lusby, MD 20657 (address)

Sheet I of -2 unit: '--One R&R No. 2001-1-054, MWO No. 1200003048 I ", - - (P.O. no., job no,etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:

One

4. Identification of System:

System Number 064

, System Name:, Reactor Coolant System 5.(a) Applicable Construction Code and Class:

Bechtel Spec 6750-M-285A Small Stainless Steel Instrument Gate, Globe & Check Valves (b)i *Applicable Sect XI Ed. fýorRepairs/Replacement "1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Compoinent-s:

Name of.

Name of Componet Manufacturer Manufacturers National Serial Number Board No.

Other Identification ASME

_ Repaired, Code Year Replaced, oi Stamped Built Replacemen (Yes or No)

Whitey Research Tool Co.

Baltimore Valve &

Fitting Co.

1-HVRC-1180 & 1181 400172 N/A First DralnValve ofofol-LT-1975 110X, wetsideof#11 Pressurizer N/A

-Valve, Globe',3/4 in. Whitey MlK

'2001 2100, ASTM A479 Tp 316, P/N:

12NBS12GLESHW2OW22, Swagelok Comp. Ends Repaired/Repl aced Replacement

7. Description of Work:

This plan was for the replacement of 1-HVRC-1 180 and 1-HVRC-1 181, drain valves off of the wet side of #11 Pressurizer Instrument 1-LT-1I OX.

8. Tests Conducted:

Hydrostatic'-]

Pneumatic]

Pressure:

N/...A psi.

Nominal Operating Pressure.

Inservice. L]

Leakage: LI Functional: L]

Test Temperature:

N/.A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Valve Whitey Globe Valve No No

-No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: NIA Expiration Date:

N/A W

Charles H. Ballard Signed:

Engineering Technician Date:

7/19/2002 Owner or Owner's fesignmeeTile Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period 19 "-3-01 to 6 -1'*--? 2

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind ansing from or connected with this inspection.

aNCommissions:

-a' c

aZ 2

d d

ate.ad L

Inspector's Signature National Board, State, and Endorsements Date:**

200 1-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of'the ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657, Date:

612612002 Sheet Iof 2 (address)

2. Plant:

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, -Lusby, MD 20657' (address)

Unit:

One R&R No. 2001-1-056, MWO No. 1200104120 (P.O. no.,job no, etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp'Date: N/A;

-Section XI Class:

Two

4. Identification of System:

System Numnber 052 SystemN e-Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class Two (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Componet

- Manufacturer Manufacturers Serial Number National Board No.

Other Identification ASME

Repaired, Code Year Replaced, or Stamped Built Replacement (Yes or No)

Bechtel DuBose National Energy Services Inc.

Cardinal Ind.

Products 2" GC-7-1003 404338 88627-GX N/A

I1 Containment Spray Pump 1975 Repaired/Repl Recirc. to refueling water tank aced N/A Nut, Heavy Hex, 5/8 In. X 11 TPI, 2001 Replacement SA-194 Gr. 2H N/A Rod, Alithread, 5/8 In. X 11 TPI, 1994 Replacement SA-193 Gr. B7

7. Description of Work:

This plan was for the replacement of fastener material for 1-FO-4146, which is the mini flow for #11 Containment Spray Pump.

8. Tests Conducted:

Hydrostatic E]

Pneumatic*]

Pressure:

NIA psi.

Nominal Operating Pressure:

Inservice: LI Leakage:[]

Functional E]

Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

Piping System Nut Rod No No No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A 7

,-Charles H. Ballard Signed:

/-

niern Technician Date:

6/26/2002 Z

wner or Owners Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

/0 j*

t to 6, -

,-OaZ-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

_'__gnaureNatonlardSCommissions:

kat5ZZe AaZ n En0 9!5C7 insp~eo'sSignature National Board, State, and Endorsements Date:

e:-1A LS 2002-.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner:-

Calvert Cliffs Nuclear Power Plant, Inc.*

Date:

8912002 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of (address)

2. Plant:

-.Calvert Cliffs Nuclear Power Plant Unit:

One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2001-1-059a, MWO No. 1200001173 (address)

(P.O. no,job no, etc)

3. W*ork Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

Type Code Symbol Stamp: N/A (nam)

-Authorization No.: N/A*

(name)

I.+

Exp Date: N/A 1650 Calvert Cliffs Parkway. Lusbv. MD 20657 Section XI Class:

Two frn44r

aJ

4. Identification of System:- System Number 083 SýstemName:

Main Steam &SG Blowdown 5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class Two (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of

- Manufacturers National Manufacturer Serial Number Board No.

Other Identification ASME

Repaired, Code Year Replaced, oi Stamped Built Replacemen (Yes or No)

Piping System Bechtel Elbow DuBose National Energy Services Inc.

Pipe Energy & Process Corporation Coupling DuBose National Energy Services Inc.

Half Coupling

-- Consolidated Power Supply Pipe Tioga Pipe Supply Co. Inc.

Pipe Cap Tioga Pipe Supply Co. Inc.

1-DR-5

'400430 Ht. Code:

75187 99883-GX Ht. #:

40007, 54906-GX Ht Code:

026D & 073C 87523-GX Ht. Code:

088F 404716 Ht.#:

A02824 404716 Ht#: LS4HA N/A Main Steam Piping and Drains between liner plate and MSIV's "N/A Elbow, Pipe, 2 In.'90 deg. 3000 lb.

ASME SA-105 N/A Pipe, 2 in. Sch. 80, ASME SA-106 Gr.B' N/A Coupling, 1-1/2 in., 3000 Lb.,

ASME SA-105, Socket Weld

__-N/A --

Coupling Hair, 2 In, 3000 lb.,

ASME SA-105, Socket Weld N/A Pipe, 4 In. Sch. 40, Carbon Steel, ASME SA-106 Grade B N/A Cap, Pipe, 4 In., Sch. 40, Buttweld, ASME SA-234, Gr.

NNPB 1975 Repaired/Repi aced 2001 Replacement 1995 Rellacement 1992 Replacement

-1994

,Replacement 2001 Replacement 2001 Replacement

7. Description of Work:

This plan was for the replacement of 1-DR-5, which is the last drain pot that comes off upstream of #12 MSIV. The drain pot UEI is 4"EB-12-1023 and the piping to 1-MOV-6611 is 2"EB-12-1024.

8. Tests Conducted:

Hydrostatic:[]

PneumaticCl Pressure:

886 psi.

Nominal Operating Pressure Inservice: ED Leakage R]

Functional [

Test Temperature:

529 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

No No No No

-- No No No

Sheet J.of 2-FORM NIS-2 (Back)

9. Remarks:

A Section X1 System Leakaqe Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Req.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code, Section XU.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: NIA Expiration Date:

N/A Charles H..Ballard Signed:

'dZ4

/EngJineenng Technician Date:

8/9/2002 "Ownier or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

//-

8-6>/

to 7-/7-0 Z-.

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures descnbed in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

-A44Z I iaN arCommissions:

X&,Lge Z*

r.

A tizI aee I~k~

S-ignaureNational Board, State', and Endorsements D*

/.

200L

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner':-

Calver't Cliffs Nuclear Power Plant, Inc.

- Date:

'8/8/2002 (name) -

1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

Sheet I of 2-

2. Plant: -

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant DE (name)

I i

Unit: -One R&R No. 2001-1-059b, MWO No. 1200001173 (P.O no.,job no, etc.)

ept.

T>ype Code Syrmbol Stamp: N/A Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

Two

-(address)_

4. Identification of System:

SystemNumber --083 System Name:

Main Steam & SG Blowdown 5.(a) Applicable Con-stiuctioinC6odeanid Class:,

ASME B3317 1969 Edition, Summer 1971 Add; Class Two (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of --

Name of Componet Manufacturer manufacturers National Serial Number - Board No.,

,Other Identification

Repaired, Code Year, Replaced, oi Stamped Built Replacemen (Yes or No)

Piping System

.Bechtel Elbow DuBose National Energy Services Inc.

Pipe Energy & Process Corporation Coupling DuBose National Energy Services Inc.

Half Coupling Consolidated Power Supply Pipe Tioga Pipe Supply Co. Inc.

Pipe Cap Tioga Pipe Supply Co. Inc.

1-DR-6

-N/A 400430 Ht. Code:

N/A 75187 99883-GX Ht. #:

N/A

, '-40007 54906-GX Ht Code:

N/A 026D & 073C 87523-GX -Ht. Code: ---

N/A 088F 404716 Ht.#:

N/A A02824 404716 Ht#: LS4HA N/A Main Steam Piping and Drains-between liner plate and MSIV's Elbow, Pipe, 2 in. 90 deg. 3000 lb.

ASME SA-105 Pipe, 2 In. Sch. 80, ASME SA-106 Gr.B Coupling, 1-1/2 In., 3000 Lb.,

ASME SA-105, Socket Weld

- Coupling Half, 2 in., 3000 lb.,

ASME SA-105, Socket Weld Pipe, 4 In. Sch. 40, Carbon Steel, ASME SA-106 Grade B Cap, Pipe, 4 In., Sch. 40, Buttweld, ASME SA-234, Gr.

WPB I97,

Repatred/Kepi 1975

-2001

'Rep alredfRepi aced Replacement 1995 Replacement 1992 Replacement 1994 Replacement 2001 Replacement 2001 Replacement

7. Description of Work:

This plan was for the replacement of 1-DR-6, which is the last drain pot that comes off upstream of #11 MSIV. The drain pot UEI is 4"EB-12-1029 and the piping to 1-MOV-6612 is 2"EB-12-1030.

8. Tests Conducted:

Hydrostatic.[

PneumaticG Pressure:

886 psi.

Nominal Operating Pressure.

Inservice E]

Leakage. ]

Functional E3 Test Temperature:

529 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

No No No No "No No No

Sheettof 0.

FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Reg.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

NIA Certificate ofAuthorizationNo.: N/A Expiration Date:

N/A Charles H..Ballard Signed:

Engineering Technician Date:

8/8/2002 Owner or Ownr's-Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components descnbed in this Owner's Report during the period //-8-o/

to 7-17-0 7...

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

-t -gnatureCommissions:

atoa EZ2Bo Ar,1i Sta), A'70 Inspecdors Signature National Board, State, and Endorsemen'ts 200

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section X1 Calvert Cliffs Nuclear Power Plant, Inc.

Date:

7116/2002

1. Owner:

(ae (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of,.

(address)

2. Plant:

Calvert Cliffs Nuclear Power Plant Uni (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No.

(address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

Ty (name)

Aul ExI 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Sec (address) t:- -One 2001-1-060, MWO No. 1200103157 (P.O. no., job no, etc.)

e Code Symbol Stamp: N/A horization No.: N/A pDate: N/A

tion XI Class:

One

4. Identificatibn of System:

SystemNumber 041 SystemName:

Chemical Volume Control 5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class One (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufacturers Manufacturer -

Serial Number National Board No.

Other Identification Year Built 1998 EdiSMo ASIME

Repaired, Code Replaced, oi Stamped Replacemen (Yes or No)

Pipe Support Bechtel DuBose National Energy Services "Inc.

DuBose National Energy Services Inc. '

Allied Nut & Bolt 184

- Co. Inc.

DuBose National 3

Energy Services Inc.

Grinnell "Corporation Grinnell Corporation Cardinal Ind.

Products 2"CC-5-1003,A7 400428 Ht. #:

J1008823 406428 Hft.:

D04009 426-GX Ht. Code

-- 214 14557 Ht. Code.

B37679 79546-GX Ht. #

K5105 47477LNP 88627-GX DuBose National 400428 Ht.# M06240 Energy Services Inc.

N/A

'Anchor separating the Main and 1975 Repaired/Repl Aux. Spray piping systems for H11 aced "Pressurizer N/A Plate,-Steel 318 in. ASME SA-36 2001 Replaci'erent N/A -

Plate, Steel, 3/4 In. ASME SA_-36

'-2001.

Replacement

NIA, Nut, Heavy Hex, 1/2 In. X 13 TPI, 1996 SA-194Gr. 2H N/A Tube Steel, Square, 4 In. X 4 In. X '1999 1/4 In.; ASTM A-500 Grade B N/A Clamp, Pipe Anchor, 2 in. for PG-1993 411 PG.43,perDrwg.# FSK-MP-0571SH0003 & 0005, Part# 1.

N/A Clamp, Pipe Anchor Base, 2 In.

1994 for PG-41 / PG-43 per Drwg.#

. FSK-MP-0571SH0003 & 0005, Part# 5.

N/A Bolt, Heavy Hex. Head, 1/2 In. X 2 1994 In. X 13 TPI, ASME SA-1 93, Gr.

B7 NIA Plate, Steel, I In. ASME SA-36 2001 Replacement Replacement Replacement Replacement Replacement Replacement

7. Description of Work:

This plan was to modify anchor 2"CC-5-1003,A7 so that it is strong enough to accommodate the new design Plate Plate Nut Tube Steel Pipe Clamp Pipe Clamp Base Bolt Plate No

-No No No No No No No S...

i

Sheet 1. of I-FORM NIS-2 (Back)

8. Tests Conducted:

Hydrostatic'"]

PneurnaticS]

Nominal Operating Pressure:

Inservice: [I Leakage: El Functional: El Pressure:

N/A psi.

Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

9. Remarks:

A Section Xl VT-3 Visual Examination of the affected component support was performed prior to the system beinq returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authonzation No.: N/A ExpirationDate:

N/A ec?~/~~

4 Charles H. Ballard Signed:

z yz LsEnginerin Technician

_Date:

7/16/2002 SOwner or Owner's Designee, Title F

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period //-...--O to 4-ý -,1-

) 2, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the AS1v2 Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

~ Commissions:

4j,3gZ_ý7.

I~E

/flj_

Ik Inspeceaor'sSignature National Board, State, and Endorsements Date:9-Z,,

71 200 Z.-

V/

SFORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl Calvert Cliffs Nuclear Power Plant, Inc.

Date:

81912002 knam¶ ),

1650 Calvert Cliffs Parkway; -Lusby, MD 20657 Sheet I of 2 (address)-

"2. Plant:'

Calvert Cliffs Nuclear Power Plant Unit:

One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2001-1-064a, MWO No.-1200003361 (address)

(PO.no;jobno,Cetc.)

" 3Typ-eCode Symbol Stamp: N/A"

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.'T (name)

--Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657

'SectionXI Class:

'One (address)

4. Identification of System:

System Number.052 SystemName:

Safetylrijection 5.(a) Applicable Construction Code and Class:-

ASME B&PV Codeý Sect.'lll, 1989 Edition, Class One (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification' of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of-Manufacturers Manufacturer Serial Number "National Board No.

7 Ii Other dentification

.ASME

Repaired, Code "Year -'Replaced, oi Stamped "Built - Replacemen (Yes or No)

, Valve BG&E 1-HVSI-709 Gate Valve Framatome ANP 400425 SN:001024 Inc.

19 N/A Shutdown Cooling Header First 2001 Isolation Drain Valve r

N/A Valve, Gate, 314 in, 1690 lb.,

2001 ASME SA-182 Tp. F316, per Drawing 12968-0132, Item 116.

7. Description of Work:

Thisplan was for the modification to install a new drain valve, 1-HVSI-7090on the Shutdown Cooling piping, 14"CC-14-1004.

8. Tests Conducted:

Hydrostatic.I--

PneumaticOd Pressure:

N/A psi.

Nominal Operating Pressure:

lnservice" E]

Leakage: E]

Functional El Test Temperature:

N/..A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

Repaired/Repi Yes Repaired/Repl R eedle

-Riplaeement.

Yes Yes

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H Ballard Signed:

X Engineenng Technician Date:

8/9/2002 "Owne"-'r or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period /--/O-01 to 8

- 'Y -02__

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

+/-Commissions:

1J86 8 Z M06-7 Inspectors Signature National Board, State, and Endorsements Data_.¢/Z"-ý C3 200 2..

DATA PACKAGE NO.

00O1024 FORMf NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUJMPS OR VALVES*

As Required by the Provisions of the ASME Code, Section 111, Division I

~Pg. 1 of

1. Manufactur~ed and.certified by' VRr1 AN INC. 2125 WARD AVXZMON'~rRAL.0UEM2C CANADlA H4N2Z6 (name and address of N Certificate Holder)

2. Manufactnxred for 17RAMATO~ TZCM;OLCGIRS *3315- -O;LD -FORNST-RD.-LYNCH~tTRG.,VA.UrSA 24501

3. Loction f izisallio.

(name and address of purchaser).

(name and address)

4. Model No., Series No. i or_ Type: -GTý Drawing PI-76 00-X22 Rev-x H

r.

_5. As2ma code, Secto -_111, 19i~o 8~-

9 NONE W

S-~~e~tfn)

(addendadate)

(Class)

(CO&cue tso.)

6. 7ump or valve VALV9 Ncominal inlet size...XLOutlet size M

00.

7. Malterial.>Body, SA-182,17316 DozmetSA-182F316

'Dink SA-351,CPSBM Bolting §A-l94.aM SA-7564,630E1100 (a)

(d)

.I,

-_)

(ci (e)-"

cert.

Nat?1 -.

Body Bonat--

Disk Holder' a-

-Board Serial Serial Serial

Serial No.

NO.

No.

ITO.

00L024 NJA H/C.:A-SV x

Y7H/C:

Tr 001024-2 A-SV FL?

Q01024-3 HBX______

-V________

TT 003.024-4 HE TT 001-024 ________A-TV F

TT 001024-6

_________A-TV

-M TT 001024-7

________A-TV PLY TT 001024-B

________A-TV

-EEO

=_________

001024-9

-A-TV FL

'TT

--001024-10, J7AI ESE TT 001024-11 7AX HEX T

003,024-12 L________

AI HEM 003.024 -JI-ZE24 TT 001024-14

________IA EXO 001024-15 TiFLF 001024-16

________JAI REM_____

001024-18__

JAI la' T7_____

001024-19

'-.JZ PYT

_001(124-20

________?

~

Supp~eteata1 infoxv~don Info= qf sWsketches, or drawings may be used provided (1) siz4 L7 lIx 11, (2) information En items 1 through 4 on thIs Data Report is~ aiued 'n each heet,(3) e

-itIsnumbered and the number of sheets is recorded at the top of this form.

(12/88)

Thts form (ED0037) inai' be obtained from the Order DepL, ASNIE, 22 LAW DRZVE< BOX 2300 FAirfieldNJ 07007.2300.

A UP 5UP

\\y~..GEA

FORM NPV-1 (Back - Pg.

2 of 2

)

Certificate -Holder' s Serial No.

001024 S. Design conditions 4055 psi 100 OF or valve pressure class 1690 (1)

(pressur)e (te=peratuxe)

9.

Cold working pressure 4055 psi at 100"F

10. Hydrostatic test 6350 psi. Disk differential test pressure

__4650 psi

11. Re=arks:

MAT3RIALS M3M ASMM SECTIO

-I RDITI0N-1989 ADDENDA-NONM CERTIPICATS OF DESIGN Design Specification certified by

.TLav' ne P.X. State

_7 Reg. no.

Design report certified by S. ITSBTSXY P.Z. State

.Q Reg. \\no. _22315 CERTIXICATE OF COMPLZANCE We certify that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASMH Code,. Section lIZ, Division 1.

N Certificate of Authorization No.

IT-2797-1 V 2,2001 Date SEP 2 6 20 Name y

=C.

siigned (N CertlEicte Holder)

(uh CERT7ZCAZH OF INSPECTIONT 1, the undersigned, holding a valid commissibn issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of OB'MRC

'_ and employed by MllI D]J 3ATflK1q ofg have inspected the pump, or valve, desc=ibed.'

in t*is Data Report on and state that to the best of my knowledge s

id belief, the Cert*ficate Hol er has consnrucEed this pump, or valve, in-accordance with--Mi ASX3 Code,. Section XIl,

.Di'ision 1.

By signing thi.* certificati, neiter the *inspector nor his employer makes any warrenty, expressed or implied, concerning the component described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or propert ge or a loss f any kind arising from or connected with this inspection.

J.MARCHAND QC8T4 Date p

o signee d Comissions _tMB=

torized Inspector)

(N21'L Bd. CmLUMt AJ"TmDu OutBEC sute or pray. and no.1 (1) ?r manually operated valves only.M

'oiL 732S3AGE

==9

° FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Requiredi by the Prrovisions of th'eA'SMiE Code Section XI

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

Date:

8/912002 (name) 1650 Calvert Cliffs Parkway; Lusby, MD,20657.........

Sheet I of.2.

(address).

2. Plant:" :---..Calvert Cliffs Nuclear _Power Plant.

- Unt:

. One (name)

-1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&RNo. 2001-1-064b, MWO-No. 1200003361-

4" (address)

(P.O no,jobno,etc)

Calvert Cliffs Nuclear Power Plant Dept.

Type-Code Symbol Stamp: N/A

3. Work Performed by:

Authorization No..-NiA

-(name)

PDe Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657'Section XI Class:

--One (address)

4. Identification of System:

System Number _052 System Name:,

Safety Injection

5. (a),Applicable Construction Code and Class: -ASME B&PV Code Sect. Ill, 1989 Edition', Class One (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

-ASME

Repaired,

'Code Name of Name of Manufacturers National Other Year, Replaced, o Stamped Componet Manufacturer Serial Number.-

Board No.

Identification Built Replacemen (Yes or No)

Valve BG & E 1-HVSI-710 N/A Shutdown Cooling Header Second 2001 Repaired/Repl Yes 1

Isolation Drain Valve aced Gate Valve

-Framatome ANP 400425 SN: 001024-

NIA Valve, Gate, 314 in, 1690 lb.,

2001 Replacement Yes Inc.

20 ASME SA-182 Tp. F316, per Drawing 12968-0132, item 116.

7. Description of Work:

This'plan was for the modification to install a new drain valve-1-HVSl-710, on the Shutdown Cooling piping, 14"CC-14-1004.

8. Tests Conducted:

Hydrostatic []

Pneumaticd Nominal Operating Pressure:

Inservice []

Leakage: [] Functional'[]

Pressure:

N/_A psi.

Test Temperature:

NI/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

L____

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No: N/A Expiration Date" N/A P//

Charles H Ballard Signed.

Engineering Technician Date:

8/9/2002 Ow~ner orOwmner's [

ine.-Ti Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period / Z-/d-d/

to 6-7-6-7-.

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

NaonloadSa,,Commissions:

/nd Endrsement Inspect s Signature National Board, State, frid Endorsements at 200 el

DATA PACKAGE NO.

0010O24 FORM NPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES*

As Required by the Provisions of the ASME Code, Section 111, Division 1

.Pg~of

-2

1. Xanufactu~red and certified by

-VLAfýZ,-22 WflAHMONTREAL. OUEBSCCANADA 1H4X1%6_

(name and addrms of NZ Certificatte Holder)

~

~

-- 2.- Manufac tured for PR MTOMETECE1OLOGZB.ý *3315 -A ODD FORE T RD. LY

ýUIG. VA.MA7 24 501

3.

~

- istallien-

-(namie and address of purcbaser)

(name and address)

4. MXodel No.1, Series Noz' -or-Type:'Gz

-D;Zia

-P76a ba-N22 3tev-

___N pj

5.

2SXH Code,--Section~Z II; Div~ision 1.:

JIML~----NN

-~~

-. (edition) -

~~... (added date)

( s)

(Cd Cae o.

6. Pump or vatlve VALVZ NmiL~ail, izilet size...XLOutlet size X....~L....

-7. Hat:erial:tBodyl, SA-1 2,F316 BonnetSA-182,F316 Diskc SA-251,CPSM

- BoltIng 6L-194.8M SA-5 64, 630E1100 Cert.>

H at-1 Body!

Bonnet Ds

Holderla

'Board Serial Serial serial

Seirial No.

NO.

N.-

O.

o 001024-2 001024-3 601024-4 001-024-5 001024-6 001024-7 0010 24-8 001024-90 001024-10 001024-11 001024-12 001024-31S4 00 024-14 001024-15

¶ 001021-16 001024-17

061024-20

'ATI A-,SV A-S B-MB A-TV A-TV A-TV A-TV J7AI JAI JAI

'ml

'm OAT

--JAI tu=== =n W/C: FLY rEM HEM HEBX EBM 33MX HEM1 FLF MEN EMN H/C: TT TT TT TT TT TI' TI' Trr TI' Supplepenala hinorzndon in foam 9f Yits, sketches, or drawings may be used provided (1) siz*44 ý U/2x 21, (2) Information In Items 1 -through 4 ou Wii Data *eort.

is iud'ue~t~nech iheeQ.3) eiath-i'bett Is numbered and the number of'shietts is recorded at the top of thls form.

(12/88)

'Tlds form (ED00037) =2y be obtai ned from the Order Dept., ASMI, 22 LAW DRIVE< BOX 2300 FafrfieldTrU 07007-2300.

TI

I FORM NPV-1 (Back -

Pg. 2 of 2

)

Certificate'Holder.s Serial No.

O9L1_24

8. Design conditions 4055 psi I00

P or valve pressure class_1690 (1)

(pressturo (temperatue)

9. Cold working pressure 4055 psi at 1000F

10. Hydrostatic test 6350 psi. Disk differential test pressure 4650 psi

11. Remarks:

MATEXRXALS M

.*M SECTION I EDITZO-1989 ADDENDA.

NONE CERTI-ICAT3 OF DESIGN Desig Specification certified by ML.L, ae P.-.

State.*

Reg-no: 40052 Deslg*

~

rpr etie S

SX*SY P.N. State --

UE_ Reg. \\no. _21 CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this pmp or valve conforms to the rules for construction of the ASME Code,.Section III, Division 1.

H Certificate of Authorization No.

M-2797-1 RY 2200l Data' SEP 2 6 MOMO Name V".

=C, C.

Sig=ed (N Cerdtkate Holder)

(Sutbl*t CXRTF'*CATZ OF XNSPRCTION I,

the undersigned, holding'a va-lid co=minsibn issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of QUEBEC 2

and employed by "MiE MI D3ATWMot of ha-e inspected the p.....

or v7alve, described.

in thi. Data Report on an

d state that to the best of my knowledge aznd

belief, t~he Certificate Nolmer bas ccnstrucEfd this pump, or valve, in-accordance withL-Ue ASNI Code,Section III, Division 1.

By signing thi.i certificati,.neiter the 'inspector nor bis employer makes any warrenty, expressed or implied, concerning the component described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or propert damage or a loss I any kind arising from or connected with this inspection.

Date4

'LZ I

J.MARCHAND QC #87* 4 Dt signed.

Cormissions OUEBEC thorized Inspertor)

(Nat'L Bd. CaocLAV~i2T0U QUtBEC state or pra. amd no.)

(1) For manually operated valves only.

. P.PAGE :-.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of th6 ASME Code Section XI Calvert Cliffs Nuclear.Power Plant,- Inc.

(name)

,Date:

' 7119/2002 1650 Calvert Cliffs Parkway; Lusby, MD -20657 Sheet of :.

2- -

-t:..

a.. e_. Cliff Nuclear.P.,

er Plant-1-addr ess ni One 2."ln:-Calvert Cliffs.Nuclear.P~oWer Plant-.....

OUeit:

ant.~ -Uni e

(name) 1650 Calvert Cliffs Parkway; Lusby,- MD 20657

.

,R&R No. 2001-1-064c, MWO No. 1200003361 (addreis)

-z7.:

(P.O no,job no;etc.)

3." Work Performedb Calvert.Cliffs Nuclear Pdwer Plat Dept.

p Tye Code..Sybol Stamp: N/A --

Wk P e b-

'Authorization No.: -N/A

.-Exp Date: N/A, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

One.

(address)

4. Identification of System:

System Number

-064 SystemName:-

Reactor Coolant System 5.(a) Applicable Construction Codeand Class:

ASME B31:7 1969 Edition6, Summer* 1971'Add; Class One (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Compofients Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufacturers Manufacturer Serial Number

--National.

Other -..

Board No.

Identification ASME

Repaired, Code Year Replaced, oi - Stamped Built Replacemen (Yes or No)

Piping System Bechtel CC14-1004 Pipe Tioga Pipe Supply 404796 Ht.#A30014" Co. Inc.

Nut Allied Group 23106 Trace Code:

Q58 Half Coupling Tioga Pipe Supply % 20441-GX Heat

-Co. Inc.Z Code: EEH Anchor Clamp Grinnell 85611-GX Heat Corporation Code: PL084

,Base Clamp

'Grinnell

- C orporatio n_

Bolt 54500-GX Heit Code: PL-097 Allied Group 41695 Ht. #: 63888 Tube Steel DuBose National 400428 Hr.#:

Energy Services 843D68110 Inc.

Pipe Clamp Anvil International 404967 Inc.

Tube Steel DuBose National 400428 HtJ# GF0413 Energy Services Inc.

N/A Shutdown Cooling Piping "Through Containment to Isolation Valves

",N/A Pipe, 3/4 In. Sch 80, ASME SA-S.....

376,TP-316.

N/A Nut, Heavy Hex, 3/8 in. X 16 TPI, S

ASME SA-194 Gr. 2H1 SN/A'

Coupling, Half, 3/4 in, 3000 Lb.,

"ASME SA-182,Tp. F316, Socket

Weld 1975 Repalred/Repi No 1975 Repalired/Repi No aced 2001 Replacement

,1998 Replacement 1991 Replacement N/A Clamp, Anchor, 314 in. Part# 1 of 1993 Replacement PG-41142/43 on Drwg.# FSK-MP 0571SH0003, 0005 & 0006 N/A--

! Clamp, Restraint Base, 3/4,in. -

1991 Replacement Part# 5 of PG-41/43 on Drwg.#

FSK-MP-0571SH 0005 N/A Bolt, Hex. Head, 3/8 in. X 1 114 In.,- 2001 -

Replacement X 16 TPI, ASME SA-193, Gr. B7 N/A Tube, Steel, 2 In. X 2 In. X 1/4 In.,

2001 Replacement ASTM A-500 Gr. B N/A Clamp, Pipe, 14 in., Medium, Grinnell Fig. 212N, with Bolting N/A Tube, Steel, 3 In. X 3 in. X 1/4 in.,

ASTM A-500 Gr. B 2001 Replacement 2001 Replacement No No No No No No No No

7. Description of Work:

This plan was for the new piping, fittings and hanger support material to be used on the modification to install a new set of drain valves, 1-HVSI-709 and 710, on the Shutdown Cooling piping, 14"CC-14-1004.

1. Owner:

Sheet X-of X*

FORM NIS-2 (Back)

8. Tests Conducted:

Hydrostatic El PneumaticC]

Nominal Operating Pressure:

Inservice" E3 Leakage, [I Functional Ej Pressure:

N/A psi.

Test Temperature:

NLA Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

9. Remarks:

No Section X! Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance S

_Rp__________

We certify that the statements made in this report are correct and that this Repair/Rep acement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

gneenng Technician Date:

7/19/2002 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components descnbed in this Owner's Report during the period /Z-16.-'O(

to 8-C--OZ.

,. and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

L Commissions: AJ*

o 2e AAJj w--l.

Inspector's Signature National Board, State, and Endorsements Date 2007._

6'

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the AS M-E Code Section Xl

1. Owner:

1650 Calvert Cliffs Parkway; Lusby, MD.20657

(

1

2. Plant:

"Date:

711512002 Sheet I of 2 (address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power (name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Unit:

I One (P.O no,job no, etc.)

r Plant Dept.

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date:. N/A Section XI Class:

Two (address)

4. Identification of System:

System Number 083 SystemName:. Main Steam & SG Blowdown 5.(a) Applicable Construction Code and Class:

ASME B16.5, 1968 Editini, Steel Pipe Flanges and Flanged F'inihgs NPS 1/2" thru 24" & CCase N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of*'

Manufacturer Manufacturers Serial Number National Other Board No.

Identification 1998 Edition

Repaired, Year -Replaced, or Built Replacement

Valve Copes Vulcan Inc.

Plug Assembly Copes-Vulcar Inc.

7010-95030-1-1 402259 SN:01-1 N/A

11 Main Steam Header I

Atmospheric Dump Valve N/A Trim, Plug Ass., Valve, 5 Inch, 6001b., press. retaining parts; Plug, #145380, Inner Plug #145381 C....

,i t

75b Repairewm~epi aced 2002

-. Replacement

7. Description of Work:

This plan was for rebuilding 1-CV-3938, Atmospheric dump Valve.

8. Tests Conducted:

Hydrostatic fl Pneumatici]

Pressure:

N/A psi.

Nominal Operating Pressure:

Inservice: L]

Leakage. E]

Functional: LI Test Temperature:

N/..A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Calvert Cliffs Nuclear Power Plant, Inc.

R&R No. 2001-1-069, MWO No. 1200'100808 Narme of Comnonet ASME Code Stamped

.(Yes or No)

No

?-

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section X1 Pre-Service NDE was performed in Support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Reparr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineering Techncian Date:

7/15/2002 Owner or OCwner's fesignee, title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z--oZ.._.

to 6-' -/69 -0Z_-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described m this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

,//

/3'z C-

omniissions:

112,g-, Z _

A l/,

n,2 7

"Inspector's Signature National Board, State, andEndorsements D*

200

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Prdisi-ons of thle ASME Code Section XI

.._ Oer:

Calvert Cliffs Nuclear Power Plant, Inc.

bate:

7/1212002.

1n. mOnr e

1650 Calvert Cliffs Parkway; Lusby, MD 20657.-

-.- Sheet'1 of 2'

2. Plant:

(address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name)

Unit:

--One, R&R No. 2001-1-070, MWO No. 1200100809

-, - -(P.O. no,job no, etc.)

Type Code Symbol.Stamp: N/A Authorization No.: N/A

" Thrn Dante: NIA 1650 Calvert Cliffs Parkway, Lusby,'MD 20657 Section XI Class:

Two (address)

_4. Identification of System:

SystemNumber 083 -

systemName: K Main-ste-i-& SG BloidownV

5. (a) Applicable Construction Code and Class:

ASME B16.5,'1968 Edition, Steel Pipe Flanges and Flanged Fittings NPS 112" thru 24" & CCase N (b) Applicable Sect XI Ed.-for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of : : Manufacturers Componet Manufacturer Serial Number

.National Board No.

Other Identification 1998 Edition

Repaired, Year Replaced, or Built Replacement Valve Copes Vulcan Inc.

7010-95030-1-2 Plug Assembly Copes-Vulcan Inc.

- 402259-SN: 01-2 N/A

12 Main Steam Header I

Atmospheric Dump Valve N/A Trim, Plug Ass., Valve, 5 Inch, 6001b., press. retaining parts; Plug, #145380, Inner Plug #145381 975 Repaired/Repl No aced 2002 Replacement

7. Description of Work:

This plan was for the rebuilding of 1-CV-3939, Atmospheric dump Valve.

8. Tests Conducted:

Hydrostatlc:r-I Pneumatic]

Pressure:

N/.A psi.

Nominal Operating Pressure:

Inservice- []

Leakage. E Functional E]

Test Temperature:

N!/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

ASME Code Stamped (Yes or No)

No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section X! Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in tius report are correct and that this Reopair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineenng Technician Date:

7/12/2002 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z--

)

O to

',-/,9-C'Z._

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

NIation BoarJ AIte and E em

ý/sopc esX~gau'reNational Board, State,'and Endorsements 6/

Dat

-200 Z...

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD,20657 (address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. WorkPerformedby:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lu-sby, MD 20657-

- (address)

Date:

7/18/2002 Sheet I of 2" "Unit:

One R&R No. 2001-1-072, MWO No. 1200103303

.(PO.no,jobno,etc)

ýType Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:

Two

4. Identification of System: - SystemNumber 045 System Name:.. Feedwater 5.(a) Applicable Construction Code and Class:

ASME B31.1.0 1967 Edition, 1972 Add (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufactureis National Oth Componet Manufacturer Serial Number' Board No.

Identifi, 1998 Edition' ASME

Repaired, Code Year Replaced, 01 Stamped Built Replacemen (Yes or No)!

er cation Valve Rockwell SN: E5711-28 International Screw Edward Valves Inc.

400813 Heat Code:

1031 Retainer Edward Valves Inc.

12001 SN: 26970-3 Cover Edward Vogt Valve 405740 Heat Code:

Co.

72355 NIA

12 Steam Generator Feedwater 1975 Repalred/Repl Supply Check Valve aced N/A Screw, Hvy Hex Hd,16 in. Check 2000 Replacement Valve, Edwards Fig. 970Y, A-193 CGr. B7,Drwg.12399-0002/0022 Item #12 N/A Retainer, Hinge Pin,16 In. Check 1997 Replacement Valve, Edwards Fig. 970Y, SA

...182, Gr. FI1, Drwg.12399-0022 Item #13 NIA Cover, Pressure Seal, 16 In. Check 2002 Replacement Valve, A-216, Gr.WCB or SA 182, Gr. FIl, Drvg.12399-0022 Item #3

7. Description of Work:

This plan was for the work that was performed to 1-CKVFW-130, #12 Steam Generator Feedwater Check Valve.

8. Tests Conducted:

Hydrostatic:[]

PneumaticO]

Pressure:

N/.A psi.

Nominal Operating Pressure.

Inservice [I Leakage" ]

Functional E]

Test Temperature:

N/.A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

2. Plant:

No No No No

{ l

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RePair/Rep lacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed:

Technician Date:

7/18/2002 0 we's U esi e,

-Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z--'

Q Z...

to 6-z/--/

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described m this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

)

-~2.'to Sn Cmmsio*Nationa oar Satoai n

ptor's signature National Board, State, and Endorsements Date AJI

ý,Td200 Z V

k¢l

"FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657' S..

(address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Date:

7/1812002 Sheet 1 of 2 Unit:

-One R&R No. 2001-1-075, MWO No. 1200101396 (address)

(P.O no, job no, etc.) -

3. WorkPerformedby:

Calvert Cliffs Nuclear Power Plant Dept.'

Type Code Symbol Stamp: N/A Authorization No.: N/A (name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657, S(address)

4. Identification of System:

System Number 064 Exp Date: N/A "Section XI Class:

O0 System Name:

Reactor Coolant System 5.(a) Applicable Construction Code and Class:,

ASME B&PV Code Sect. i11, 1968 Edition, Winter 1968 Add; Class A, CCases N-2, N-10.

(b)'Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Componet Manufacturer Valve Dresser Industrial Valve Co.

Relief Valve Dresser Industries Inc.

Manufacturers National

- Serial Number "Board No.

SN: BM-07953 400078 SN:BN 04373 Other

'Identification N/A Unit One Pressurizer Safety Relief Valve NIA Valve, Consolidated Closed Bonnet Maxlflow Safety; 2-1/2 in.

Model 31739A, only for RV 200 location.

Year Built

,1977 ASME Repaired,'

Code Replaced, oi Stamped Replacemen (Yes or No)

Repalred/Repl Yes aced

7. Description of Work:

This plan was for the replacement of Unit-1 Pressurizer Safety Valve, 1-RV-200.

8. Tests Conducted:

Hydrostatic [-

Pneumatic"]

Pressure:

2250 psi.

Nominal Operating Pressure.

Inservice: ]

Leakage* R Functional [1 Test Temperature:

53.

Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

2. Plant:

le S2001 Replacement-"'..

Yes

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakaqe Test of the affected component was performed durinq the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A S/75 Charles H. Ballard Signed:

g Technician Date:

7/18/2002 Ovwner r**rwneurs es'inee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid conmmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z,.-6 to 7-1(

?-O., and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examnations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

/ýýksi naturmmissions-4jý Z

1A11D12 6 56i Int pe National Board, State, and Endorsements Date:

200Z

FORM NVR-1 REPORT OF REPAIR [

MODIFICATION D-OF NUCLEAR PRESSURE RELIEF DEVICES

1. Work performed by Dresser Valve Divisioh; Dresser Equipment Group, Inc.

( name of organizaton )

Intersection Hwy. 167 @ 3225 North, Alexandria, Louisiana 71309

( address )

2. Work performed for Baltimore Gas & Electric Co. 1650 Calvert Cliffs Parkway Lusby, Maryland 20657 (name and address)

3. Owner Baltimore Gas & Electric Co. 1650 Calvert Cliffs Parkway Lusby, Maryland 20657 (name)

4. Name, address and identification of nuclear power plant 1650 Calvert Cliffs Parkway Lusby, Maryland 20657 (address)

(Baddress )

Baltimore Gas & Electric Co. Calvert Cliffs Nuclear Station

5.

a: Repaired pressure relief device:

Safety Valve b: Name of manufacturer Same as item 1 above c: Identifying'nos.

31739A BN-04373 N/A STEAM 2-1/2" 1977

( type)

( mf's senal no.)

(Natl. Bd. No.)

( service )

(size)

(yearbuilt) d: Construction Code ASME Section I11 1971 Summer 1972 NIA 1

(namelsection/divwslon )

(edition)

(addenda)

(Code case(s))

(Code Class)

6. ASME Code Section XI applicable for in service inspection:

1983 SL (edition)

7. ASME Code Section XI used for repairs, modifications, or replacements:

1983 (edition)

8. Construction Code used for repairs, modifications, or replacements:

1971

( edition)

9. Design responsibility Same as item 1 above immer 1983 (addenda)

Summer 191 (addenda)

Summer 1972 (addenda)

N/A (code Case(s) )

33 N/A (Code Case(s))

N/A (Code Case(s))

10. Opening pressure:

2485 PSIG Blowdown made at:

Wyle Laboratories, Huntsville, Alabama (if applicable)

N/A

%. Set pressure and blowdown adjustment Using Steam

"(location)

(test medium)

11. Description of work: (include name and identifying number of replacement parts)

Valve Was Disassembled, Nozzle Torqued, Seat Lapped, Assembled, & Tested. Parts Replaced: Guide/Support Plate Gaskets PIN 3831018N, Cotter Pins PIN 2220219, &

Adj. Ring Pin Gaskets PIN 3610508.

12. Remarks:

CERTIFICATE OF INSPECTION I, /erY"'/ VI,,

, certify that to the best of my knowledge and belief the statements made In this report are Correct and'the repair, modification or replacement of the pressure relief devices described above conforms to Section XI of the ASME Code and the National Board Inspection Code "VR" and "NR" rules.

National Board Certificate of Authorization No.

VR-70,95,97-118 & 120-124 to use the "VR" stamp expires National Board Certificate of Authorization No.

NR-45 to use the "NR' stamp expires Date 1/-,-

00 Same as Item 1 above.

Signed

4 (name of certificate holder) 1poo

-representative) 6-29-2001 6-30-2002 Quality Engineer CERTIFICATE OF INSPECTION 5/'*

, holding a valid commission issued by The National Board of Boiler and Pressure Vessel Inspectors and certificate of competency issued by the jurisdiction of Louisiana and employed by Hartford Steam Boiler Inspection and Insurance Co.

of Hartford, CT have inspected the repair, modification or replacement described In this report on 4,6 and state that to the best of my knowledge and belief, this repair, modification or replacement has been completed in ac ordance with Section XI of the ASME Code and the National Board Inspection Code "VR" and "NR" rules.

By signing this certificate, neither the undersigned nor my employer makes any warranty, expressed or implied, concerning the repair modification or replacement described in this report. Furthermore, neither the undersigned nor my employer shall be liable in any manner for any personal injury, property damagrlsso k

ing from or connected with this inspection.

Date Signed C

s Naional Board (Cinc.

eden-Jurisdiction, and no.)

OR REPLACEMENT Z 400078 01-27420-0 (P.O. no., job no., etc)

(Uile)

"-FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASýME Code Section XI Calvert Cliffs Nuclear Power Plant,']nc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Date: - 711812002.

-Sheet Iof 2 (address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Unit:

One R&R No. 2001-1-076, MWO No. 1200101398 (address)

(P.O no.,job no., etc.)

Tp CodeSyblSapN/

3. Work Performed by.

Calvert Cliffs Nuclear Power Plant Dept.

Symbol Stamp: N/A Perfre bAuthorization No.: N/A (name)

Exp Date: N/A 1650 CalvertCliffs Parkway, Lusby, MD 20657 SectionXI Class:

One (address)

4. Identification of System: -.System Number 064 System Name:

Reactor Coolant System 5.(a) Applicable Construction Code and Class:

ASME B&PV Code Sect. Il, 1968 Edition, Winter 1968 Add; Class A, CCases N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Manufacturer Manufacturers Serial Number National" Board No.

1998 Edition Other Identification ASME "Repaired, Code Year Replaced, oi Stamped Built Replacemen (Yes or No)

Valve Dresser Industrial Valve Co.

'Relief Valve Dresser Industries I Inc.

SN: BM-07948 400743 SN: BM S 07952 N/A Unit One Pressurizer Safety 19 Relief Valve N/A Valve, Consolidated Closed "20 Bonnet Maxiflow Safety; 2-1/2 In.

Model 31739A, only for RV 201 location.

77 Repaired/RepI Yes 77, RepairedfRepl aced 00 Replacement

7. Description of Work:

This plan was for the replacement of Unit-1 Pressurizer Safety Valve, 1-RV-201.

8. Tests Conducted:

Hydrostatic.[-]

PneumaticSi Pressure:

2250 psi.

Nominal Operating Pressure Test Temperature:

Inservice: El Leakage.l-]

Functional: []

5 3_0 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

2. Plant:

Name of' Componet Yes Yes 1998 Edition

Sheet 2 of 2 -

FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached C ertificate of C om pliance Repar/R plac men We certify that the statements made in this report are correct and that this RearRelacement forms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate ofAuthonzationNo.:

N/A Expiration Date: N/A

/

Charles H. Ballard Signed:

Engineering Technician Date:

7/18/2002 Owner or Owner's Ddsignee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

/-5 8-0

_.. to //- 0 2.-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

nns sg r

"Commossions: B2 rS A

nJ z

d A10m 6n Crnp/o's` S ign ature National Board, State, and-Endorsements Date: Q4

,30 E200.,

s--- FORM IMVL*-

RFPORT OF REPAIR {

MODIFICATION El f

NJUCLEAR PRESSURE RELIEF DEVICE

1. Work performed by Dresser Valve Division; Dresser Equipment Group, Inc.

( name of organization)

I,4,-m Wv 1R7 ny 3225 North. Alexandria. Louisiana 71309 OR REPLACEMENT Z 400743 U1-t3-1 (P.O. no, job no.* etc)

(address )

2. Work performed for Baltimore Gas & Electric Co. 1650 Calvert Cliffs Parkway Lusby, Maryland 20657

( name and address )

3. Owner Baltimore Gas & Electric Co. 1650 Calvert Cliffs Parkway Lusby, Maryland 20657 (name)

(address )

4. Name, address and identification of nuclear power plant Baltimore Gas & Electric Co. Calvert Cliffs Nuclear Station 1650 Calvert Cliffs Parkway Lusby, Maryland 20657

5.

a: Repaired pressure relief device:

Safety Valve b: Name of manufacturer Same as item 1 above c: Identifying nos.

31739A BM-07952.

NIA STEAM 2-1/2" 1977

( typem)

(m senal no )

( Natl Bd. No )

( service )

(saze)

(year buitt) d: Construction Code ASME Section II!

1971 Summer 1972 NIA 1

(namelsection/dMvislon)

(edition)

(addenda)

(Code case(s))

(Code Class)

6. ASME Code Section XI applicable for in service inspection:

1983 Summer 1983 (edition)

(addenda )

7. ASME Code Section XI used for repairs, modifications, or replacements:

1983 Summer 1983 (edition)

( addenda )

8. Construction Code used for repairs, modifications, or replacements:

1971 Summer 1972 (edition)

(addenda)

9. Design responsibility Same as item I above N/A (Code Case(s))

N/A (Code Case(s))

10. Opening pressure:

2550 PSIG Blowdown (if applicable)

N/A

%. Set pressure and blowdown adjustment Using Steam m d iocaon )

(test medium)

11. Description of work: (include name and identifying number of replacement parts)

Valve Was Disassembled, Nozzle Torqued, Seat Lapped, Assembled, & Tested. Parts Replaced : Guide/Support Plate Gaskets PIN 3831018N, Cotter Pins P/N 2220219, &

Adj Ring Pin Gaskets P/N 3610508.

12. Remarks:

CERTIFICATE OF INSPECTION 1,

rv-V 1/.

, certify that to the best of my knowledge and belief the statements made in this report are Correct andi{he repair, modification or replacement of the pressure relief devices described above conforms to Section Xl of the ASME Code and the National Board Inspection Code "VR" and "NR" rules.

National Board Certificate of Authorization No.

VR-70,95,97-118 & 120-124 to use the "VR" stamp expires National Board Certificate of Authorization No.

Date //_

to. go Same as Item 1 (name of certificate NR-45 to use the 'NR" stamp expires above.

Signed_*

z/..

.k) holder )

iAuthorped representative J 6-30-2002 Quality Engineer (title)

/*,,,

/

CERTIFICATE OF INSPECTION I,

holding a valid commission issued by The National Board of Boiler and Pressure Vessel Inspectbrs and certificate of competency issued by the jurisdiction of Louisiana and employed by Hrtford Steam Boiler Inspection ane Insurance Co.

of Hartford, CT have inspected the repair, modification or replacement descnbed in this report on

. 4a6 AT and state that to the best of my knowledge and belief, this repair, modification or replacement has been compl&te in-accordance with Section Xl of the ASME Code and the National Board Inspection Code "VR" and "NR" rules.

By signing this certificate, neither the undersigned nor my employer makes any warranty, expressed or implied, concerning the repair modification or replacement described in this report. Furthermore, neither the undersigned nor my employer shall be liable in any manner for an personal injury, property dama or Ioss ny kin0rising from or connected with this inspection.

Date J4L Signed 4

~

L~

Commissions_

(National Board (ncl endorsements), aYd Iunsdiction, and no) 6-29-2001 e holder) 400743 01-27388-1

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI 1 Owrer:

Calvert Cliffs Nuclear Powv Praitl'Inc.Date:

/1812-02 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1of 2 (address)

SCalvert Cliffs Nuclear Power Plant'--,

"'Unit:

One 0

2. Plant: _

(name)'

1650 Calvert Cliffs Parkway;' Lusby, MD 20657 (address)

3. Work Performedby:

Calvert Cliffs Nuclear Power Plant (name)

~ j~m~z~

~I k

"ri ')flr.7 R&R No. 2001-1-077,-MWO No. 1200101781 (P.O. no,job no., etc)

Type Code Symbol Stamp: N/A Authorizaiion No.: N/A Exp Date: N/A Qýpt;nn Y T Class:

nn a 1iooU CalVerL tIlllb roll hWczy,

LULaii, wyi-us.

(address)

4. Identifictilon of Sytem:

SystemNumber 064 'S"ystemName:

_,Reactor Coolant System

5. (a) Applicable Construction Code and Class:

ASME B&PV Code Sect. I11, 1965 Edition, Winter 1967 Add; Class

()-

Appi-bCCases: 1335-2, 1336, 1359-1

A p,.

R e l (b

plcable Sect XI Ed. forRej is/Rpacem~nt -Q 1998 Edition iL.

6. Identification of Components Repaired or Replaced and Replacement Co Name of Name of Componet Manufactudrer Manufacturers Serial Number' National Board No.'

nponents:

ASME

Repaired,

-Code Other Year Replaced,'of Stamped Identificatioii

-Built 'Replacemen (Yes or No)

Pressure Vessel Plug "Combustlon Engineering BGE CCNPP Shops Vessel SN: 67107 20911 Head SN: 67207 0200101511 405132/

N/A 001 thru 009 Unit One Reactor Vessel and Head 1971 Plug, Incore Detection Seal, Dwg.

2001 12148-03,ASTM-A276, Ty316 SS

7. Description of Worlc This plan was for the installation of dummy stainless steel ICI plug(s) into Unit #1 Reactor Vessel In Core Instrumentation Flanges.

8. Tests Conducted:

Hydrostatic:[]

PneumaticOl Pressure:

2250 psi.

Nominal Operating Pressure:

Inservice: fl Leakage RJ Functional. El Test Temperature:

530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Repaired/Repi Yes Repalred/Repl

-1 aced Replacement Yes No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl VT-1 Visual Examination of the replacement threaded fasteners was performed to satisfy Section XI Pre-Service NDE Requirements.

A Section XI System Leakaqe Test of the affected component was performed durinq the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard

.Ce~tifi-c-atf

-of Iniw'ice-Inspe ction I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period /- 4"-0d..-

to 7-2'--0. Z

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

ns g2tuN n

&or,

/tt,MdE Ing't/spe igatr National Board, State, and Endorsements 9ýE 1

200oZ_

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Ownfer:....

Calvert Cliffs Nuclear Power Plant, Inc.

te

- 7/2002 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet1 of'2 '

--(address)

2. Plant:

Calvert Cliffs Nuclear Power'Plant' nit:

One (name) 1

-7 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2001-1-079, MWO No.' 1200000999 (address)

Calvert Cliffs Nuclear Power Plant Dept.

3. Work Performed by(

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657

" (P.O. no., job no, etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: 'N/A "Section XI Class:'

Two (address)

4. Identificaition of System:

SystemNumber 052

.SystemName:

Safety Injection-".

5.(a) Applicable Construction Code and Class:

ASME B16.5, 1968 Edition, Steel Pipe Flanges and Flanged

-Fittings NPS--7 thru 24"&-CCase N-10 -* :."

(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition,

6. Identification of Componefits Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufacturer Manufacturers Serial Number National Board No.

S-Other Identification ASME

Repaired, Code Year "Replaced, oi Stamped Built "Replacemen (Yes or No)

SN: P34753-2 Nova Machine 38612 Heat Code:

Products Corp.

FSD' Velan Valve 405030 SN: 7569 Corporation N/A

IIA Low Pressure Safety 1975 Injection to Reactor Coolant Loop NIA Nut, Heavy Hex, 1114 In.X 8 1999 TPI, ASME SA-194 Gr. 7' N/A Disc, Velan, Item No. 3 Dwg.

2001 12124-0002, SA-182 F-316 S.S. for Velan 6"/15001b. Check Valve

epaarewepi Repaired/Repl aced Replacement Replacement

7. Description of Work:

This plan was for the maintenance work on I-CKVSI-1 14, #1 1A Low Pressure Safety Injection to Reactor Coolant Loop, replace valve disc and nuts.

8. Tests Conducted:

Hydrostatic []

PneumaticC]

Pressure:

N/__.A psi.

Nominal Operating Pressure:

Inservice:I]

Leakage. E]

Functional E]

Test Temperature:

N/..A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Valve Velan Enginnering Co.

Nut Disc i- 0 INo No No

I Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

The replacement valve wedqe/plup/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date-N/A Charles H Ballard Signed:

Engineering Technician Date:

7/31/2002 Owner or Owner's besignee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z-ZI -o to 7-19--0 Z-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures descnbed in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

NatiaCommissions:

oa&dZ-2

,S A anJ d *ndors LAIns tosSgaueNational Board, State, an~d Endorsements 96aý5 200.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Ow*ner: '

Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657-

2. Plant:

S..

(ad dress)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by.

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)

"* Date:,

-711212002 SSheet I of 2 Unit:

One R&R No. 2001-1-080, MWO No. 1200000998 (P.O. no, jobno., etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:

Two

4. Identification of System:, System Number 052 SystemName:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B16.5, 1968 Edition, Steel Pipe Flanges and Flanged Fittings NPS 1/2" thru 24" & CCase N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement

'I19

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of

--Name of "

Manufacturers Componet.

Manufacturer Serial Number

'National Board No.

.,. Other Identification Edition ASME "Repaired,

'Code

-Year Replaced, or Stamped Built Replacement

' (Yes or No)

Valve Velan Enginnering Co.

Nut Nova Machine Products Corp..

Rod Nova Machine Products Corp.

Rod Allied Group Disc Velan Valve Corporation SN: 0627 38612 Heat Code:

- FSD 38454 Heat Code:

NBW 27260 Heat Code:

P35 405030 SN:7570 N/A

1iB Low Pressure Safety 1975 - I Injection to Reactor Coolant Loop N/A Nut, Heavy Hex, 11/4 In. X 8 1999 "TPI, ASME SA-194 Gr. 7 - ---

N/A Rod, Allthread, 11/4 In. X 8 TPI, 1999 ASME SA-193 Gr. B7 N/A Rod, Allthread, 11/4 In. X 8 TPI, 1998

-- ASME SA-193 Gr. B7 N/A Disc, Velan, Item No. 3 Dwg.

2001 12124-0002, SA-182 F-316 S.S. for Velan 6"11500[b. Check Valve tepaired/Repi Yes epared/Repl need Replacement

-Replacement Replacement Replacement

7. Description of Work:

This plan was for rebuilding 1-CKVSI-124, #11B Low Pressure Safety Injection to Reactor Coolant Loop, and replacing valve disc and fasteners.

8. Tests Conducted:

Hydrostatic:[--

Pneumatict]

Pressure:

N/.A psi.

Nominal Operating Pressure:

Inservice: I]

Leakage:E]

Functional [L Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Yes No No No No

-_____I--

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

The replacement valve wedqe/lplu/qdisc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReoplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineenng Technician Date:

7/12/2002 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

/-

7--/

to a-/?--OZ_.

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described m this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

,2)

/

Inspu National Board, State, and Endorsements Dat

/4, 200 Z..-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI 1Calvert Cliffs Nuclear Power Plant, Inc.-

-Dt

711712002

1. Owner:Mae (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657

2. Plant:

,-Sheet 1 of 2 Unit:

One R&R No. 2001-1-081, MWO No. 1200000997 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)

- (P.O. no job no., etc.)

SType Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A SSection XI Class:

Two

4. Identification of System:

System Number 052 SystemNName:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B16. 5, 1968 Edition-, Steel Pipe Flanges and Flanged Fittings NPS 11/2" thru 24" & CCase N-I0 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet

-Name of Manufacturer Manufacturers Serial Number National Boar'd No.

Other Identification I-... -_

ASME

"- Repaired, Code Year Replaced, oi -Stamped

"-Built Replacemen (Yes or No)

Valve Velan Enginnering Co.

Disc Velan Valve Corporation UEI: 1-CKVSI-144 405030 SN:7568 N/A

12B Low Pressure Safety 1975 Repaired/Repi Injection to Reactor Coolant Loop -

aced N/A Disc, Velan, Item No. 3 Dwg.

2001' Replacement 12124-0002, SA-182 F-316 S.S. for Velan 6"/15001b. Check Valve

7. Description of Work:

This plan was for the maintenance work on 1-CKVSI-144, #12B Low PressureSafety Injection to Reactor Coolant Loop, replace valve disc.

8. Tests Conducted:

Hydrostatic-[:]

Pneumatic-]

Pressure:

N/A psi.

Nominal Operating Pressure:

Inservice E]

Leakage:E]

Functional:[D Test Temperature:

N/.AM Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I 1 in.,

(2) inf6iiiiio t-i-niFerns hrough 6 on this report is included on each-she-et, an-d-(3)-each-l-et-inmb-e-red-an-th-e number of sheets is recorded at the top of this form.

No No No t,

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

The replacement valve wedge/plug/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A

_L_*'/

/'*

"/'*

J/ECharles H. Ballard Signed:

Engineering Technician Date:

7/17/2002 or Owners Designee, Title r

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

-Z-Z 1 --0 Z to

& -Z.* -o K.., and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Inspecto__SgnaturCommi-ssions:

A NatZZio -oard ec,)

E em Inspector's Signature National Board, Stateý' and Endorsements Date

/

200 Z.

I

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI Calvert Cliffs NuclearPower Plant, Inc.

-Date:

7117/2002 (name) 1650 Calvert Cliffs-Parkway; -Lusby, MD-20657--.-, -

-Sheet-I of :- -

2. Plant:

S..

.(address)

Calvert Cliffs Nuclear PowerPlant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 unit:.

One R&R No. 2001-1-082, MWO No. 1199802485 (address)

(P.O. no. job no, etc.)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.'

Tye Code Symbol Stamp: N/A (nme WrPAuthorization No.: N/A

(

Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Glass: -

One (address)

4. Identification of System:

System Number 052 SystemName:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B16.5, 1968 Edition, Steel Pipe Flanges and Flanged Fittings NPS 1/2" thru 24" & CCase N-10 (b) Applicable Sect.XI Ed. for Repairs/Replacement,

6. Identification of Components Repaired or Replaced and Replacement Components:

"Name of Manufacturer Manufacturers Serial Number National Board No.

Otiiear "Identification 998 Edition Year Built ASME

Repaired,

-Code Replaced, oi' Stamped Replacemen (Yes or No)

Velan Enginnering Co.

Velan Valve SCorporatlon SN: 903234 N/A

11B Reactor Coolant Loop Sarety Injection Inlet Check Valve 404387 SN: 7560 N/A Disc, Velan, 12 In. 1500 lb. Check "Valve, ASME SA-1 82, Tp. F316, Drwg. 12124-0001, Item #3 1975 RepaIred/Rep!

No 1975 -Repalred/Repl aced

-2002 Replacement i

7. Description of Work:

This plan was for the maintenance work on 1-CKVSI-227; replace valve disc.

8. Tests Conducted:

Hydrostatic:[]

Pneumatic]"

Pressure:

N/A psi.

Nominal Operating Pressure:

Inservice: E]

Leakage [] Functional: E]

Test Temperature:

N/._AA Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the numiber of sheets is recorded-aft e to-p-orthisform.

1. Owner: ' '

Name of Componet Valve Disc No

No 998 Edition

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

The replacement valve wedge/plug/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A ExpirationDate:

N/A Charles H. Ballard Signed:

Engineering Technician Date:

7/17/2002 Owner or Ownees Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period to and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

SCommissions:

e/ ?.2_e Ad, -. /

6/ /7 Inspector's Signature National Board, State, and Endorsements Date:`Q4u L

200Q

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

C-calvert Cliffs Nuclear Power Plant, lnc.

(name) 1650-Calvert Cliffs Parkway; Lusby, MD 20657 (address)

2. Plant: -

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address) 3 WorkPerformedby:.Calvert Cliffs Nuclear Power Plant Dept.

3. Wr efre y

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)

Date:

7117/2002 Sheet I of 2

.Unit: --- One R&R No. 2001-1-083, MWO No. 1200103149 (P.O no.,job no, etc)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:

One

4. Identification of System:

SystemNumber 052

- SystemName:

- Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B16.5, 1968.Edition,-Steel Pipe Flanges and Flanged Fittings NPS 1/2" thru 24" & CCase N-a (b) Applicable Sect XI Ed. for Repairs/Replacement S.

1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturers, Nationl-"

Other Componet Manufacturer Serial Number Board No. -,

Identification ASME

Repaired, Code Year Replaced, ol Stamped Built Replacemen (Yes or No)

Valve Velan Enginnering Co.

Disc Velan Valve Corporation Stud Velan Engineering Co.

404 105 Nut Velan Engineering 90247-GX Heat Co.

Code: VS0 SN: 9903234 N/A

12A Reactor Coolant Loop.

1975 Safety Injection Inlet Check Valve 387 SN: 7561 N/A Disc, Velan, 12 In. 1500 lb. Check 2002 Valve, ASME SA-182, Tp. F316, -.

Drwg. 12124-0001, Item #3 523-GX Heat N/A Stud, Cover, 17/81n.XSTPI, 1995 Code: F3 ASME SA-193 Gr.B7, 12 In. 1500 lb. Check, Drwg. 12124-0001, item

18

-t N/A

"'Nut, Hex, Cover, 17/8 In. X 8

- - 1994 Replacement TPI, SA-194 Gr7, 12 in, 1500 lb.

Check, Drwg. 12124-0001, Item

17

7. Description of Work:

This plan was to cover maintenance work on 1-CKVSI-237; replace valve disc and bolting.

8. Tests Conducted:

Hydrostatic

Pneumatic{j Pressure:

N/..A psi.

Nominal Operating Pressure.

Inservice" [] Leakage:E]

Functional: E Test Temperature:

N/.A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

RepaIred/Rep!

.Repaired/Repi aced.

"Replacement

-Replacement No No No

-No-...

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl VT-1 Visual Examination of the "NEW" threaded fasteners was performed prior to installation to satisfy Section Xl Pre-Service NDE Requirements. (LTP: 137800)

The replacement valve wedqe/pluq/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A S/

Charles H. Ballard Signed:

Engineering Technician Date:

7/17/2002 6w-r or Owneers Designe&e, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period 2-- //--

--- to 4. "- Zý-- 2.

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

gntrCommissions:

NatiZ4al, ArdL S

ata Edrmn lnspeto s-Signature National Board, State, and Endorsements Date:

200 Z-..

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions ofthe ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

Calvert Cliffs Nuclear Power Plant (name)

2. Plant:

Date:

711512002 Sheetlof 2 Unit:

One 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 R&R No. 2001-1-084, MWO No. 1200103150

" (P.O. no,job no, etc.)

"Type Code Symbol Stamp: N/A Authorization No.: N/A

Exp Date: N/A Section XI Class:

One (address)

4. Identification of System:

System Number 052 SystemName:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B16.5, 1968 Edition, Steel Pipe Flanges and Flanged Fittings NPS l/2"-thru 24" & CCase N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of I Name of Componet Manufacture Valve Velan Enginnering Co.

Disc Velan Valve Corporation "Manufacturers xr Serial Number 1-CKVSI-247 404387 SN: 7558 National.

Board No.

Other Identification N/A

12B Reactor Coolant Loop Safety Injection Inlet CheckValve N/A Disc, Velan, 12 In. 1500 lb. Check Valve, ASME SA-182, Tp. F316, Drwg. 12124-0001, Item #3 1998 Edition

Repaired, Year Replaced, or

- Built Replacement 1975 Repaired/Repi aced 2002 Replacemer ASME' Code' Stamped (Yes or No)

No nt No

7. Description of Work:

This plan was'for the replacement of the disc on 1-CKVSI-247, #12B Reactor Coolant Loop Safety Injection Inlet Check Valve.

8. Tests Conducted:

Hydrostatic E]

PneumatieO Pressure:

N/.A psi.

Nominal Operating Pressure:

Test Temperature:

Inservice" I]

Leakage: E]

Functional. []

NIA Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (I) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner: '

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was oerformed in suVoort of this activity.

The reolacement valve wedae/olua/disc/trim received a Construction Code Surface Examination at the reauest of the resident ANII.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Signed:

j Charles H. Ballard Engineering Technician Owýner orOwner's Designee, Title Date:

7/15/2002 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z - /, 1-0.

to

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report m accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

I&4f*--I?-

Commissions:

4~/~eA/Mr A-iZ A17 Date:rstgatr Naioa 2oard Ztt5adEnosmns National Board, State, and Endorsements I&ipcto' Signature'

JFORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions'of the ASM4E Code Section XI S..

Calvert Cliffs Nuclear Power Plant, Inc.

1. Owner:

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

2. Plant:

"---Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657" Date: -. 712512002 Sheet I of 2 Unit:-

-one R&R No. 2002-1-002a, MWO No. 1200002340 (address)

(P.O. no job no, etc.)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

Type Code Symbol Stamp: N/A Authorization No.: N/A (name)

Exp Date: N/A -,

1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

One

4. Identification of System: "System Number 041 System Name:

Chemical Volume Control 5.(a) Applicable Construction Code and Class:.. ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970 SAdd; Class -One (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of -

Manufacturers National

-0t Componet Manufacturer Serial Number Board No.

Identifi 1998 Edition er Year cation' z Built ASME

-Repaired,

--, Code I

,Replaced, oi Stamped Replacemefn (Yes or No)

Valve Bechtel Check Valve Velan Engineering Co.

SN: 2093 L10041NP SN:

961027-1 "N/A

11 Regen.Heat Exch. Check '

. 1975 Valve to #12B RCS Cold Leg Loop N/A Valve, Check, 2 in. 2680 lb.,Butt 1996 Weld, ASME SA-182, T p F316, Velan Dwg 12968-0138

7. Description ofWork:

This plan was for the replacement of 1 -CKVCVC-1 86, #11 Regenerative Heat Exchanger Check Valve to

121 Reactor Coolant Loop.

8. Tests Conducted:

Hydrostatic L-Pneumatic-]

Pressure:

2250 psi.

Nominal Operating Pressure Inservnce" []

Leakage:R]

Functional'[

Test Temperature:

530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

RepaIred/Rep!

aes Repaired/Repl aced Replacement Xes Yes P

L I¢

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Reg.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineenng Technician Date:

7/25/2002 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z - _i - 0 Z, to 7-/ 7-, _2

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures descnbed in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind ansing from or connected with this inspection.

National Board, State, an8 Endorsements Date:G _

iS 200Z__

DATA PACKAGE NO.

961027 P.6 FOI4RM IPV-1 CERTIFICATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES *

'As Required by the Provisions of the ASME Code,Section III, Division I

-Pa:o3. 'of I. Manufactured and certified by--

VELAN INC. 2125 WARD AVE-MONTREAL CANADA H4MIT6 (name and address of N Certificate Holder)

2. Manufactured for BALTIMORE-GAS-& ELECTRIC' P.O. -BOX -1472 BALTIM0RE, MD.

21203 2

(name and address of purebaser) -

3. Location of installion IVERT CLIFFS NUCLEAR PLANT-NORTH OF LUSBY.

MD, 20657 (name and address)

4. Model No., Series No., or Type: PS-CHEC Drawing -PI-76800-N28 Rev D

CRXý N/A 5,

ASHE 'Code,Section III, Division 1:

199 NONE 1

N/A (edition)

-,-(addenda date)

(class)_,

(Code Case no.)

6. Pump or valve VALVE

-Nominal-inlet size 2"

Outlet size 2"

( i n.)

.- 1 7*. Material: Body SA-182,F316 Bonnet SA-182,F316 Disk SFA 5.13 RNiCr-A Bolting N/A (c)

(d)

(COL*4 (b)

(C)(d(e Bonnt LJ.bJ Cert.

Holder's Serial-No.

-N at 'lý Board No'.

N/A

', Body Serial

-F No. S H/C: B16 Bonnet UISK Serial.

Serial

- No.

H/C:

lARA H/C:26A...

Supplemental information in form of lists, sketches, or drawings may be used provided (1) size is 8 112 x 11, (2) inforaton in itm I thouh 4 on ths Dat Report "Is included on each sheet, (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1(12188)

This form (E00037) may be obtained from the Order Dept., ASME, 22 LAW DRIVE< BOX 2300 Fairfield, NJ 07007-2300.

NOTE.

DWG-Pl-76800-NS0REV.0 961027-1 I

P.7 FORM NPV-1 (Back - Pg.

2 of 2

)

Certificate Holder's Serial No.

961027

8. Design conditions 6430 psi 100 (pressure)

(temperature)

OF or valve pressure class 2680 (1)

9.

Cold working pressure 6430 psi at 100OF

10. Hydrostatic test 10050 psi. Disk differential test pressure 7375 psi

11. Remarks:

MATERIALS MEET ASME SECTION II EDITION: 1989 ADDENDA:

NONE CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this pump or valve conforms to the rules for construction of the ASME Code,Section III, Division 1.

N Certificate of Authorization No.

N-2797-1 Expires MAY 2,98 Date 41 a

Name VELAN INC.

Signed f*

(N Certificate Holder)

(authorized aprestntative)

CERTIFICATE OF INSPECTION I,

the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of QUEBEC and employed by PROVINCE of OUEBEC have inspected the pump, or valve, described in this Data Report on qf'(ot5/o 5

, and state that to the best of my knowledge and belief, the Certificate Holder has constructed this pump, or valve, in accordance with the ASME Code,Section III, Division 1.

By signing this certificate, neither the inspector nor his employer makes any warrenty, expressed or

implied, concerning the component described in this Data Report.

Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

BEN01-1 FF,,A ATTE Date%* 0),3 signesC41,.1 P A*#-hBN iT1 ETT Ejn Commi sionL,,

W.JV.4 kLI tate or prov. and no.)

(1) For manually operated valves only.

k^UUW PýLr

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Require'd by the'Provisions of the AS-ME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.-,-

- Date 7/19/2002

-- (name) ifs Parkway; Lusby, MD 20657 Sheet I of 2 (address)

2. Plant:

Cal~vert li I..DIII I'UId c

u 0Vw1IjIcIL

~~~(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Wrk erfrmeby:Calvert Cliffs Nuclear Power Plant 1 I

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)

-unit:

-Une R&R No':2002-1-002b, MWO_ No.- 1200002340 (P.O. no., job no, etc.)

)ept.

Type Code Symbol Stamp: N/A

-Authorization No.: N/A Exp Date: N/A Section )G Class:

One

4. Identification of System: -,System Number 041 System Name Chemical Volume Control 5.(a) Applicable Construction Code and Class: _ASME 1331.7 1969 Edition, Summier 1971 Add; Class One (b) Applicable Sect XI Ed. for Repairs/Replacemc t ý t_

- -:ý

-1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufactuýre

-Manufacturers Serial Number' Nationa-Other Boaýrd No:-

Idirtification ASME

Repaired, Code

`Year-Replaced, oi Stamped Built Replacemen EYe's -or No)

Bechtel 2"1CC-5-1004 Consolidated Power Supply 20439 Heatff4471 XBJ N/A From #11 Regen. Heat Exch. to

12B RCS Cold Leg Loop N/A

.Pipe, 2 In. Schedule 160, ASME SA-376 Tp. 316 1975 RepairedfRepi

-aced 1998 Replacement

7. Description of Work:

This plan was for the replacemnemt of piping durning the replacement of 1-CKVCVC-186:

8. T~sts Conducted:

Hydrostatic-[

Pneumatics Nominal Operating Pressure-Inservice E] Leakage:~ Functional. El Pressure: --

250 psi.

Test Temperature: __ 53

__Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owvner:

1650 Calvert Cli Piping System Pipe No

.No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section Xl required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Req.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Roplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A SCharles H. Ballard Signed.

Engineering Technician Date:

7/19/2002

--DCwnero 0

ý.&s Designe-e.Title i

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston. RI have inspected the components described in this Owner's Report during the period Z-Z-( -O Z*.

to 7-

/ 7--o 7.

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection "L

Us-oo trCommissions:

1 at13 Boar, Stat Edrm Inspector's Signature National Board, State, land Endorsements Date ý 200 2_

6'/

I-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

-Date:

7116/2002.

(name) 1650 Calve-t Cliffs Parkway; Lusby, MD 20657 S Sheet I of 0 (address)

Calvert Cliffs Nuclear Power Plant (name)

Unit:

One 1650 Calvert Cliffs Parkway; Lusby, MD 20657

3. Work Performed by:

R&R No. 2002-1-003, MWO No. 1200200048 (P.O no.,job no, etc.)

auurcj Calvert Cliffs Nuclear Power Plant Dept.

Type Code Symbol Stamp: N/A Authorization No.: N/A (name)bx t"

I/

A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Secxp ate: I

/.ClA-Tw

"-Section XI Class:

Two

4. Identification of System:

SystemNumber 041 System Name:

Chemical Volume Control 5.(a) Applicable Construction Code and Class:

ASME B31.1.0' 1967 Edition, 1972 Add (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced anid Replacement Components:

Manufacturers

~.qria1 Number "National Board No.-

S " 'Other

"- "Identification 1998 Edition "Repaired, Year. Replaced, or Built Replacement Piping System Nut Bechtel Mackson Inc.

Pipe Clamp Grinnell Corporation Pipe Clamp Base Bolt Grinnell Corporation 2"EB-6-1007 406241 HL #Y67408 79546-GX Ht.# 5105 47477LNP Cardinal Ind.

88627-GX Heat Products Code:L7 A4 Tube Steel DuBose National Energy Services Inc.

Fiat Bar Energy Steel &

Supply Co.

400428 Heat Code:

13594 402888 Ht.#642767 Compoet Srial um/e N/A

11 Steam Generator Bottom 1975 Repaired/Repl Blowdown to #11 Blowdown Tank aced Nut, Heavy Hex, 1/2 In. X 13 TPI,

_2002 Replacement SA-194 Gr. 2H -

N/A Clamp, Pipe Anchor, 2 in. for PG-1993 41 1 PG-43, per Drwg.# FSK-MP 05715H0003 & 0005, Part# 1.

N/A Ciamp, Pipe An*chor Base, 2 In.

.... 1994 for PG-41 I PG-43 per Drwg.#

FSK-MP-0571SH000 3 & 0005, Part# 5.

N/A Bolt, Heavy Hex. Head, 1/2 in. X 2 In. X 13 TPI, ASME SA-193, Gr.

B7 NIA Tube, Steel, 2 in. X 2 in. X 1/4 in.,

ASTM A-500 Gr. B N/A Bar, Flat, 4 In. X 1/2 In., ASME 2001 SA-36 "Replacement

-Replacement Replacement 2001 Replacement Replacement

7. Description of Work:

This plan was needed to correct the Design deficiencies on Anchor #10 on line 1#EB-6-1007.

8. Tests Conducted:

Hydrostatic'l PneumaticO]

Pressure:

N/..A psi.

Nominal Operating Pressure' Inservice: [] Leakage:E]

Functional:E]

Test Temperature:

N/._AJ Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

2. Plant:

Name of Nar~e of Alfsmir~pr ASME

-Code Stamped (Yes or No)

No No

-No No No No No No N/A 1994

Sheet.of 1L FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforns to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A I

Charles H. Ballard Signed:

Engineering Technician Date:

7/16/2002 Ownr;&or er's oesine!

W/

ngnerngTchica Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z-lO - CZ, to

.-f3--o Z..

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

-Commissions: "J a'

-24'*:

oard. SnD "Ins~or'sSigntureNational Board, State, arnd Endorsements Date-:(%Le.4 /el_ 200.-

l

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the'provisions of the ASME Code Section Xl

1. Ower:

Calvert Cliffs Nuclear Power Plant, Inc.-

Date-:

81812002 (name) 1650 Ca-lVert Cliffs Parkway; Lusby, MD 20657.

.Sheet Io."

-2

-(address)

_ 2..Pla-fl Calvert Cliffs Nuclear.Power Plant Unit:,

One,%i-A J-.,

(name)

"1650 Calvert Cliffs Parkway; Lusby, MD -20657 '.R&R No. 0 (address)

"(P.O. no.,job no, itc.)

Calvert Cliffs Nuclear Power Plant De0t.;T-yinI-aip

/

S-3. Work Performed by:

C AuthorifftNonlNo.- N/A (name)

. r

.ExpDate: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657

- [Section XI Glass:

TWo i

(address)

4.

ystm:_SystemNumber 045Feewtr

4. Identification of System:" "Sse ~ mbr -45 :

.S tri a e'-.

, e dwater....

5.(a) Applicable Construction Code and Class: 'ASMEB31.I;0 :1967 Edition,-1972 Add";

(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

ASME Name of Manufacturer Manufacturers Serial Number National Board No.

'Other' Identification Valve Rockwell 025 International Screw Edward Valves Inc. 400813 Heat Code:

So1031 N/A

11 Steam Generator Feedwater Supply Check Valve NIA Screw, Hvy Hex Hd,16 In. Check Valve, Edwards Fig. 970Y, A-193 Gr. B7,Drwg.12399-0002/0022 Item #12 1975

- RepairedlRepl No 1975

, Repaired/Repl aced "

2000

-Replacement

7. Description of Work:

This plan was to allow the use of the part listed herein to assist in the rebuilding of 1 -CKVFW-1 33, #11 Steam Generator Feedwater Check Valve.

8. Tests Conducted:

Hydrostatic ]

PneumaticG]

Pressure:

N/A psi.

Nominal Operating Pressure:

Inservice" L]

Leakage: E]

Functional: E]

Test Temperature:

N/.A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Name of Componet "Year Built

Repaired, Replaced, o1 Replacemen Code Stamped (Yes or No)

No No

-T

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A ExpirationDate:

N/A Charles H. Ballard Signed:

Engineenng Technician Date:

8/8/2002 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period 3 - ZC-,o 0Z. to

&--/7-/ *.

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report m accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Natioia Zn AAJLr ta4ed Inspecto s Wiatur-e National Board, State'and Endorsements 61 Dat w*

-. q 200 Z_.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the' Provisions-of the ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

(name)......

Date:

711912002 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)

2. Plant:

Calvert Cliffs Nuclear Power Plant Unit:

>,One (name) t 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

SW oCalvert Cliffs Nuclear Power Plant Dept.

3.Work Performed by:

(name)

R&R No. 2002-1-017, MWONo. 1200201261 (P.O. no,job no, etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 SectiohnXI Class:

Two (address)

4. Identification of System:

SystemNumber.083 System Name:

Main Steam & SG Blowdown 5.(a) Applicable Construction Code and Class: 'ASME'B31.7 1969 Editionl, Summer 1971 Add; Class Two.

(b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Componet Manufacturer-Manufacturers

- National Serial Number Board No.

Other, Identific~ation ASME i

Repaired, Code Year Replaced, o i Stamped 1 Built. Replacemen (Yes or No)

Pipe Support BG & E SPlate Plate DuBose National, Energy Services Inc.

DuBose National Energy Services Inc. -

NA 400428 Ht.#:

1106933 400428 Ht.#:

2107091 Plate DuBose National 400428 Ht.#: D04009 Energy Services Inc.

Tube Steel DuBose National 34557 Ht.#: B37679 Energy Services Inc.

N/A N/A Steam generator bottom/surface 1975 blowdown gang support Plate, Steel 1/4 In. ASME SA-36

-2001 Repaired/Repl aced Replacement N/A Plate, Steel 1/2 In. ASME SA-36 2001 Replacement N/A Plate, Steel, 3/4 In. ASME SA-36 2001 Replacement N/A Tube Steel, Square, 4 In. X 4 In. X 1999 114 In.; ASTM A-500 Grade B Replacement No No No No No No

7. Description of Work:

This plan was to add structural steel to modify existing multiple support in accordance with ES199601526 110, ECR 384.

8. Tests Conducted:

Hydrostatic:-]

PneumaticO" Pressure:

NIA psi.

Nominal Operating Pressure:

Inservice' El Leakage E]

Functional [I Test Temperature:

NI..A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

-mia coition

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A

-,/ -7,A R.E. Cantrell Signed:

{

Sr. Engineer Date 7/19/2002 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z-

.9-02_. to

,-IS-C Z-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described m this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

" % U n t Sa-tu-No Commissions:

Aa

NaIr, St1ate, a

/n ndo 6

Inspelctor's Signature National Board, State, and Endorsements Date: 0200 2-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

(name)

Date:

818/2002 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Unit:

'One R&R No. 2002-1-019a, MWO No. 1200001375 (address)

3. WorkPerformedby:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (P.O. no,jobno., etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A

,ExpDate: N/A SSectior XI Class:

Two (address)

4. Identification of System:

SystemNumber 052

_SystemName:_ýSafety Injection 5.(a) Applicable Construction Code and Class:" ASME Draft Code'for Pumps & Valves,'1968 Edition, March 1970 "Add; Class Two I -

(b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

,Nameof Nameeof Componet Manufacturer Manufacturers Serial Number National _

BoardNo.

Other Identificatic 1998 Edition ASME "Repaired, Code Year Replaced, oi Stamped n

Built Replacemen (Yes or No)

Mackson Inc."

407499 Heat Code:

ATX Mackson Inc. - -407499 Heat Code:

ATY N/A Unit #1 Containment Sump WVest 1975 Repaired/Rep Recirculation Header Isolation aced Valve N/A Rod, Allthread, 11/4 In. X 8 TPI, 2002 Replacement ASME SA-193 Gr. B8M, Cis. 2, Strain Hardened "N/A-Nut, Heavy Hex;1 1/4 In. X 8 2002 Replacement TPI, ASME SA-194 Gr. 8M, Strain Hardened

7. Description of Work:

This plan was to allow for all work, including fastener replacement, to rebuild 1-MOV-4145, Unit #1 Containment Sump West Recirculation Header Isolation Valve.

8. Tests Conducted:

Hydrostatic El Pneumaticd Pressure:

N/_.A psi.

Nominal Operating Pressure:

Inservice" E]

Leakage:E]

Functional El Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

2. Plant:

Valve Velan Engineering Co.

Rod Nut Yes Yes No No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xi Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineering Technician Date:

8/8/2002 ner or Owner's signee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components descnbed in this Owner's Report during the period

/--30-0'2.. to and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions: Ie SBBZZneo Boar, te aE em tnspecA'intr National Board, State, and Endorsements Date:

j-200 Z

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

"--Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657--

1 (address).

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Date:

"818/2002 Sheetlof 2 Unit:,

One R&R No. 2002-1-019c, MWO No. 1200001375 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657

\\

(address)

-(P.O. no,job no, etc.)

Type Code Symbol Starnp:,.N/A Authorization No.: N/A

\\

E-.

xp Datý:,_ N/A"

- Section XI Class:",Two

4. Identification of System:

S'stiffmNumber 052 System Name:

Safety Injection 5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class Two (b) Applicable Sect XI Ed. for Repairs/Replacement

".1998 Edition

6. Identification of Components Repaired or Replaced ahd Replacement Components:

Name of

, Name of Componet Manufacturer Manufacturers Serial Number National "Board No.'

Other Identification L

ASME Yea

Repaired, Code Year-Replaced, oi -Stamped Built Replacemen (Yes or No)

N/A Unit #1 Containment Sump West 1975 Recirculation Header Support.

RepairecllKepl iNo Repalred[Repl No aced

7. Description of Work: -

-:- I, This plan was for the work on 24"HC-3-1001; H13 / R12, Unit #1 Containment Sump West'Recirculation Header Support. A portion of the support was removed to allow for X-rays of the Encapsulation then reinstalled.

8. Tests Conducted:

Hydrostatic ]

PneumaticO]

Pressure:

N/.A psi.

Nominal Operating Pressure Inservice.[]

Leakage E]

FunctionalElI Test Temperature:

N/._A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:-`

2. Plant:

Pipe Support Bechtel '

24"HC-3 1001,H131R12

}

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI VT-3 Visual Examination of the affected component support was performed prior to the system being returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance Repar/Rplacmen We certify that the statements made in this report are correct and that this RepairReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineering Technician Date:

8/8/2002

-owner or Owner's Designeetttle" A'

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described m this Owner's Report during the period S-7-0 -...

to Z-,--o

_-, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

/z!I Za-/

tn' -

Commissions:

/UB

? -

2 a AIJ*r A-l,) 6 117 Inspectbs Signature National Board, State, and Endorsements Dat 200 2.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the 1Provisions of the ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc.

1nay

. L..

1650 Calvert Cliffs Parkway;.Lusby, MD,20657 Sheet I of-2 (address)

Calvert Cliffs Nuclear Power Plant (name)

2. Plant:

1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Di (name)

Unit:

ýOne, R&R No. 2002-1-024, MWO No. 1200201762

.P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A

+_

[

Exp Date: N/._AA 1650 Calvert Cliffs Parkway, Lusby, MD 20657 SectionXI Class:

(address)

4. Identification of System:

System Number 061 System Name:

C6ntainmeiit Spray

- Two

5. (a) Applicable' Construction Code and Class:

ASME Draft Code for Pumps & Valves, 1968 Edition, March'1970 Add; Class Two (b) tApplicable Sect XI Ed. for Rep'airs/Replacement 9*

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Componet Manufacturer Manufacturers Serial Number National Board No.

Other Identification'

)8 Edition ASME

Repaired, Code "Year.Replaced, oi Stamped Built Replacemen (Yes or No)

Valve Masoneilan International Inc.

'Valve Plug Masonellan Dresser C/O Eastern Controls H-59104-5 41449.GX SN:

A12421-6 N/A

11 Containment Spray Header-.

Isolation Valve N/A Plug, 8 in. Masoneilan"Valve,"

ASTM A-479, Tp. 316, P/N:

013439-010-1N3

7. DescriptionofW ork:..

This plan was for rebuilding 1-CV-4150, #11 Containment Spray Header Isolation Valve.

8. Tests Conducted:

Hydrostatic-f]

Pneumatic3 Pressure:

N/A psi.

Nominal Operating Pressure-Inservice" D]

Leakage El Functional El Test Temperature:

N/.A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

Date:

7118/2002 1975 RepalredfRepl No 1995 1 990 Repaired/Rep]

aced Replacement No

'No

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance

__Rpar/eplceen We certify that the statements made in this report are correct and that this Repair/Replaement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

I IneenTechncian Date:

7/18/2002 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period S-21 -) 7-_. to 4,-24-01,

.,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures descnbed in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

spc) ors Snu"aa-rCommissions: ALE

St2atr, AJý-

Ano0e4t In'spector's s-ignature National Board, State, A~d Endorsements Date:*)

,ek

?0. 200O.

FORM NIS-2 OWNER'S REPORT FOR REPAIR ! REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI Calvert Cliffs Nuclear Power Plant, Inc."

Date:

.81512002

1. '.JwuuL.

I

(name) 1650 Calvert Cliffs Parkway;. Lusby, MD: 20657 Sheet'I of 2 (address)

Pl

2. Plant:

~Cilve-rt Cliffs Nuclear Power Plant unt*.0 (name)

'ne 1650 Calvert Cliffs Parkway;: Lusby, MD 20657!

" R&R No. SG-1-001a, ESP No. ES199601526 (address)

(P.O. no,job no., etc)

Calvert Cliffs Nuclear Power Plant Dept.

Type Cod6 Symbol Stamp: N/A

3. Work"Performedby Authorization No.: N/A (name)

Exp Date: N/A 1650'Calvert Cliffs Parkway,- Lusby, MD 20657

--,Section XI Class: -One & Two....

"(address)

4. Identification of System:

System Number 64183 SystemName:

Steam Generator Replacement 5.(a) Applicable Construction Code and Class:

ASME B&PV Code Sect. 11l, 1965 Edition, Winter 1967 Add; Class A CCases: 1332-2, 13324359-1 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:.

Name of Name of Manufacturers National Other Conrionet "Manufacturer'

-- SerialNumber BoardNo.-,

-Identificati Pressure Vessel

, Combustion CE 67504 20922

11 Steam Generator Engineering Steam Babcock&

Generator Wilcock Canad:

4621CCNP-21-9000 SN: 7811-01 on Year Built 1970 Repaired/Rep'

" 196 Steam Generator Lower 2001.,

Assembly, Primary Side Head, Tubes and Secondary Shell up to Transition ASME

Repaired, Code' Replaced, ot Stamped Replacemen (Yes or No)

Repaired/Repl Ipacedmn Replacement I

Yes SYes

7. Description of Worc..

This plan was for the replacement of the primary side head, tubes; and secondary side shell u1 to'the transition area of #11 Steam Generator. This also documents the reconfiguration ofithe Feed Nozzle and Surface Blowdown Nozzle.

8. Tests Conducted:

Hydrostatic El Pneumatic--

Nominal Operating Pressure:

Inservice: 0l °,Leakage: R]

Functional: E]

Pres'suire:

890-

.psi.-.:-

TestTemperature:--53 F.:53 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is in6luded on 6achi sheet, and (3) eachsheet is numbered and the number of sheets is recorded at the top of this form.

1970 I

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section X1 VT-1 Visual Examination of the replacement threaded fasteners was performed to satisfy Section XI Pre-Service NDE Requirements.

A Section X1 System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section Xl required pressure tests. Addtional Section III Exarrminations were perforrmed (as applicable) to satisfy Code Case N-416-1 and Reg.Guide 1.147. A Section -XI Surface Examination, Eddy Currefit Examination and Ultrasonic Examination of the affected component was performed to satisfy Section Xl Pre-Service NDE Requirements.

With an approved Relief Request from NRC, we were allowed to use the 1993 Addenda of the 1992 Edition of Section III. This addenda permits the use of wire type IQO's (image Quality Indicators) as an altemative to plaque type IQO's for radiographic examinations. Plaque type IQO's are required by Section III, 1992 Edition which is referenced by Code Case N-416-1 and by the installation code which is Section Ill, 1989 Edition.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date: N/A S7Charles H. Ballard Signed:

Engineering Technician Date:

8/5/2002 OwnLer or Owner's Designee, tie Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the penod Z-- //-) Z-to

-7'- /0-0 Z7_, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in thi Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

'Ž

.d U,5"=

Commissions: /J38*

zZ,. A,&f

/22) 61-7

" nspec-rs Signature National Board, State, a'nd Endorsements D200 1--

FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES As Required by the Provisions of the ASME Code,Section III Not to Exceed One Day'sProduction Pg. I of -4 anufactured and certified by Babcock & Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontario NIR 5V3 (name and addrsss of NPT Certicate Holder)

2. Manufactured for-SGT Ltd. P.O. Box 1219, Lusby, Maryland 20657 (nameand ad=3re*oPurchiser)

3. Location of Instarlation Calvert Cliffs Nuclear Power Plant (CCNPP) Units 1 &2,.LusbV, Mailand 20657-4702 (name wd address),)

4. Type*

7811 001 Rev.6

-" See-attached List #1

-See List #1

... 2001

( whr g no.)

(mn l. spme no.)

(

6 S.Irn't?*)

(CRN)

"year built)

5. ASME Code,Section II, DMslvo 1989:

No Addenda 1

See attached List #2 (editon) -

(addeda date) e(class)

(Code Case no.)

6. Fabricated In accordance with Const. Spec. (Div. 2 only)

Revislon Date (no.)

7. Remarks:

Secondary side hydrotest has not been performed. Post-hydrotest final NDE has hot been performed on" s econdary side. Previous N-2 form for primary head (National Board No. 402) attached.

8. Nom. thtckneis (in.) See List #3 Min. design thl*clness (in.) See List #3 D0a. ID (ft &Vn.) Sea List #3 Length 1vrll (ft & in.) 39'-8 7/16"

9. When eaplicable. Certificate Holders' Data Reports are attached for each Item of this report:

F. Hydro. test pressure See LUst #4 at

!,Ir (when applicable)

National Part orAppurtenance Board No. § Serial Number In Numerical Order (26)

(27)

(28)

(29)

(30)

(31)

(32)

(33)

(34)~

(35)

(36)

(37)

(38)

(39)

(40)__

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

P*.

1f 4

,PG;Ft16 ý2 CCIVI-- I

FORM N-2 (Back-Pg. 2 of 4j Certificate Holder's Serial Nos.

7811-01 through CERTIFICATION OF DESIGN Design spedfications certified by E.S. Broczkowski Jr.

P.E. State MD Reg. no.

12424 "ien appkable)

DesIgn report* certified by L. VIzi P.E. Prov. Ont.

Reg. no. 48244206

when 2;nobll]

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these)

Steam Generator Sub-Assembly (See FiQ. 1) conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No.

N-2791 Expires January.23, 2004-Date

.A" Name Babcock Wicox Canada Signed CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ontario and employed by Technical Standards and Safety Authority of Ontario.

have Inspected these Items described in this Data Report o

, and state that to the best of my knowledge and belief, the Crtificate Holder has fabricated these parts or appurtenances in accordance with the ASME Code, Section Ill, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neitherthe Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment Iscribed in this Data Report. Furthermore,'neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property mage or loss of any kind aq om r nected with this Inspection.

Date /

Signed ions S____,,__

____-,or)

W.____________________n__________,______,

t mtoftad.~spddpo q

(Nan Scl. (ncL enoorerrna,,ts) and sute orprov. and no.]

Attachment to FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES Cer*tcate Holder's'Serial N.os 7811-01 through National Board Nos.

196 through

1. Manufactured and certified by Babcock & Wilcox Canada,.581 Coronation Boulevard,

2. Manufactured for SGT Ltd. P.O. Sox 1219. Lusby, Maryland 20657

3. Locaeon of installation CCNPP Units 1&2, Lusby, Maryland 20657.4702

4. Type:

5.ASME Code:

List #1:

Cambrddae, Ontario Material Specification Tensile Strength

-PrimaryHead SA-508C.3a go ksi Primary Head Inlet Nozzle SA-508 Cl. 3a go ksl Primary Head Outlet Nozzle SA-508 Cl. 3a *90 ksl Base Support Stool SA-533 Type B Cl. 1 80 ksn Tubesheet SA-508 Cl. 3a So ksi Tubes SB-163 N-20-4 (Alloy 690) 80 ksi Secondary Side Shell Cans SA-508 0l. 3a o0 ksi Secondary Side Shell Cone SA-503 Cl. 3a 90 ksl Primary Manway Covers SA-533 Type B Cl. 1 80 ksi Secondary Handhole Covers SA-533 Type B Cl. 1 80 kst Secondary Inspection Port Covers SA-533 Type B Cl. 1 80 ksi Small Nozzles - Primary Side SB-166 N06690 69.9 ksi Small Nozzles-Secondary Side SA-350 LF2 70 ksi Blowdown Nozzles SFA 5.5 E7018-Al Buildup 70 ksi Recirculation Nozzle SFA 5.5 E7018-Al Buildup 70 ksi List #2:

Code Cases:

N-20-4 N-41'1-1 N-474-1 2142-1 2143-1

"__ _N-_4:0-1 4'-11 I N-416-1 List #3:

Nominal Thickness Min. Design Thickness Inner Diameter Primary Head 7"

-7.000" Tubesheet 21.875" 21.500" Secondary Side Shell Cans

1) Shell above Tube-sheet 4.375" 4.25"'

13"3 3116n

2) Remainder of Shell 2.a75" 2.77"

.13'-3 3/16" Secondary Shell Cone

1) Above Secondary Shell Can 5.125" 5.000".

2) Conical Portion 4.625" 4.500" Tubes 0.042" 0.038" 0.666" Norm.

Attachrn ntto FORM N.2 CERTIFICATE HOLDERS' DATA REPORT iOR IDENTICAL Page S of 4 lari --

d e

Attachment to FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES Cert[ficate Holder's Serial Nos.

7811 -01 through National Board Nos.

196 through

1. Manufactured and certified by Babcock & Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontarlo 4"ime aM swr.,4a(NPTCM9UftWtS iler)

2. Manufactured for SGT Ltd. P.O.-Box 1219,.Lusby, Maryland 20657,

3. Location of Installation CCNPP Units 1&2, Lusby, Mavalnd. 2O657-4702'

4. Type:

5.ASME Code:

List #4:

Secondar Side Primar Side Design Pressure 1015 °sa 2500 psia Desi n Temperature 550°F 650TF Hydrotest Pressure 3125 psia Hydrotest Temperature 70'F FIGURE 1 GENERAL ARRANGEMENT Page 4 of 4

JQA-9 9-13 4 ý FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND.APPURTENANCES*

-As Required by the Provisions of the ASME Code, Section lit Not to Exceed One Day's PicodwitIon-

- -- pg. i of -2...

1. Manufacwred and certified by

Japan Steel Worlcs, Ltd.,Hr+/-rcran PLant/4-bat.sU-c'achi, Muroan, Hoklaido,0Sl-8505 Emma and eddress et NPTrConificasa Xaldtrl

2. Manufactured for Elbc G WTi1cox,981 Coronation 11lvd.

XCnrde n~~,1 Vanaf a

¶L71e

2 LU N

riw WWI 01ofl M=1111d,1, Calvert Cliffs Kuclear Poweri Pla'nt unit. 1.

-,2 calvirt.Ccunt3:y;Marylafld 91.-SOS. Cl. Se.

CME'L sped. M.id Czimawand add?.si N17917Re.

itn. Osi rero SA-508Cl.

3 Tvna:

If 2.999 A1AO tA.

.I4 IlL 2V'.AT

1, 1989 Ngo ddendaI

6. Fabricated In accardan~ce with Const. Spec. (Div. 2 onlyl Revision

-Data

, lydrcstatia'test is rat perforaid in The Japan Steel Work~s, Ltd. eadng thi~ckness is min. 0.20" from bae.emetal.

-Cladding materials are SPA-5.4, 1.11 Cl..

30L 16 + Z3fl-an SEr.

304aýIE0L P.O. Nol.a CHf3302064

--JSf Job No. -

Fi-NB-43OS 1Eeat No. a985159-21-2 JSW 11C. NO.:1 S. Nom.thickness (in.)

Min. design -hlaknass rin.

- Dla.10(frit eghvrf~f&i.

'~

a. When applcable, Certificate Holders' Data Reaports are attached for each Item of this report:

-pert or Appurtenance National Serial Numbar Board No.

In Numerical Order

() 1046 402 (21 (31 (14) t7)

(15)

(74)

(161 (20)

(101 (22)

(.231 (24)

(15)

Part or Appurtenance -National Saris! Number Board No.

-in Nurnaricsl Order (27)

(26)

(301 (32)

(33]

(341 (3511)mo lr u

rT0.

(37)

(381

-U1 (411 (43)

(43)

(441 148)1 (471 (48)

(451

10. Deslginpressure IA pal. Temp.

G F. Hydra. test pressure.

wi pAcbi at tamnp.

'Supplemental Informitimi In the form of lists, skatchas, or drawings may be ulad'provided (11)

i.@ I SK~ x 11. (2) informattctIon in tois 2 snd 3 en this Ortilapr Is Included an each sheet. (21 each sheatth numbared and %he number of 3ha~ts Is rcotrded at the ftb of this farm.

(121=81 This lorm (E=01O may be obtained fromn the Order Dept.. ASME, 22 Law Drive, Box 2300, Fairfield, NJ! 07007-2300.

3. Locationi 4.,

Idrawirig uoJ 1.

I I

4.

1you Itanilla siremach)

ICFWI

JOA 134 2

FORM N-2 (Back-Pg. 2of-2

}

Cartificate Holder's Serial Nos.

1046 through CER71FICATION OF DESIGN DesTgn specifications certified by FP.E. State N/A Reg. no, IVA iwhan lUplI=blOl r

Oeslgn'report' cartifled by N/A FP.E.

State NIL Reg. no.

~ ~~(Whin Applic-,tl[]-

.1*

CERTIFICATE OF COMPLIANCE We ceify that the statements made In this report are correct and that this (these)

Part conforms to the rules of construction of the ASME Code,Section III, Division 1.

NFT Certificate of Authcrization No.

N-2725 Expires J01 21 7001

- ~The J7apan Steel Wo-rks, Ltd Date JuTe 25, 1999 Name-Muroran Plant Signed IflPT C=,"fl:al.ecd-(el a\\

+C"(-u

nnm"tad<rff

ft I~a

$.vs)

J.

TAI1RA" CERTIFItATE OF INSPECTION...

Ithe undersigned, holding a valid conrmi'ssion Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of ZLLLNIO£S and employed by,H*LS.I. & I.

Co.

of M TFOfD. CT.

have Inspected these Items described In thrs Dat Report on

,a'.

Y

, and =tae that to the best of my knowledge and belief, the Certificate Holder has fabricated these part4 or appurtenances in accordance with the ASMIS Code,Section III. Divislon 1. Each part Ulsted has been authorized for stamping on the date shown above.

By slgning this certificate. neither the Inspector nor his employer makes any Warranty, expressed or implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any mariner forany personal Tnlury or property damage or loss of any kind arising from or connected with thl spaction.

Date.

,Z Signed

.'...Commissions i'#L0145A.LS.

a /*r+*lp'cll lNn 84. Ibn'c audorem*r ul ad*s taie r oV.; rQo.I

"+A W RAROATA BWC

~

/

~

/7'

~

4

~INCOMING INSPECTION AUG 1999

~

~~

~ AAPPROVED

°.4

1

4.

Ag 4

4.-.44.

'4.

It V

\\*.

I %L 4.-

l.).

I a

4.4

'7 5

'3 I?

4

°

4.......

4..

t !

The Steam Gene0ra6tf Team A Washington rtoup lfematNonal, Inc. /Dke Engineeing & Servlces, Inc. Company Babcock & Wilcox, Canada 581 Coronation Boulevard' Cambridge, Ontario Canada, NIR 5V3 Attention:

Mr. Ganry Astles, Project Manager

Reference:

Subject:

August 15, 2001 LetterNo. 01-0013-BWC Action.Require&d No CCNPP Steam Generator Procurement Purchase Order No. 4621-CCNP-21-9000 CCNPP Unit 1 ASME Design Report

Dear Mr. Astles:

CCNPP and SGT have reviewed ASME Diesign ReportNos. 222-781 1-SR-8.1, Rev. I in accordance with the ASME Boiler and Pressure Vesiel Code Section III, NCA-3260, Division 1, and have determined the report rfieets the owner's requirements per Code.

If you have any questions, please contact me at (704) 382-7148 or David Keen (704) 382 0096.

Action Required:

None Respectfully yours, Kevin J. Connell Rep laIekd &ff S f- -ii Giifd*-Eg-ih

-g M -ae SGT Ltd.

Attachment:

Calculation Cover Sheet for 222-781 1-SR-8.1 Rev. 1 cc w/ attach:

B.R. Rudell T. L. Konerth B. Broczkowski File 13.021.3.

D.D. Crawford

i. B. Wheeler M. C. Scott M.S. Sills K. Wolfcale D. S. Keen A.M. Wolfe T. Helms (File)

P.O. Box 1219.Lusby, MD USA 20657 Phone: (416) 495-8102 Fax: (410) 495-8106

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.'

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

2. Plant:

Calvert Cliffs Nuclear Power Plant (name)

Date:

81112002 Sheet I of 2 Unit:

One R&R No. SG-1-001b,' ESP No. ES199601526 (P.O. no,job no, etc.)

apt.

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section7XI Class:

One 1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by. - Calvert Cliffs Nuclear Power Plant Di (name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)

4. Identification of System:

System Number 064 5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class One (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufacturer Manufacturers Serial Number National Board No.

Othe Identification ASME

Repaired, Code Year Replaced, oi 'Stamped Built Replacemen (Yes or No)

Piping System Combustion 30" & 42" CC-1 Engineering Piping 4nn T

tI...

N/A Reactor Coolant Piping IYV Rtep alre*uaed aced

7. Description of Work:

This plan was for the Reactor Coolant Hot Leg and Cold Leg Pipe welding to support the replacement of #11 Steam-Generator;...

8. Tests Conducted:

Hydrostatic.E-l PneumaticS]

Pressure:

2273 psi.

Nominal Operating -Pressure-Inservice:.

Leakage':

-Functional" E Test Temperature:

0_2 Deg. F I

NOTE: Supplemental sheets in form of lists, sketches, or drawings may be uSed, provided (i) gize is 8-1/2 in. x-1 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

System Name:

Reactor Coolant System egC N/A Reactor Coolant Piping

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure-.

tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Req.Guide 1.147. A Section Xl Surface Examination and Ultrasonic Examination of the affected component was performed to satisfy Section X1 Pre-Service NDE Requirements.

With an approved Relief Request from NRC, we were allowed to meet the 1993 Addenda of the 1992 Edition of Section II1. This addenda permits the use of wire type IQO's (Image Quality Indicators) as an alternative to plaque type IQl's for radiographic examinations. Plaque type IQI's are required by Section III, 1992 Edition which is referenced by Code Case N-416-1 and by the installation code which is Section II1i 1989 Edition.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacernent conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A

"-Or

- 00,Charles H. Ballard Signed:

~t~j( ~~#Ž~7 Engineering Technician Date:

8/1/2002

'Owner oiorhO'eees designee'. Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period 2-(i"-6 ?..

to 6-28-0) 7%., and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor hiý employer makes any warrant, expressed or implied, concirnifig' the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer-shall he l1ihlc in any rnnerb._an.personalinjury.or property damage of a loss of any kind arising from or connected with this inspection.

~~~~

~ý Commnissions:

/e8ZZt-

,'2 4l Inspector's Signature National Board, State, and Endorsements Date(ý2*

200 Z..

6'

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT, ACTIVITY As Required Required by the Provisions of the ASME Code Section X1-

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

(name).

1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

2. Plant:

'Calvert Cliffs Nuclear Power Plant (name) 1650 CalvertCliffs Parkway; Lusby, MD 20657 R&F (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept._

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657, (address)

4. Identification of System:

System Number Var.

-System Name:

Ma Date:

- 8/1/2002 Sheet I of 3

'Unit:

-One No. SG-1-001c, ESP No. ES199601526 (P.O. no,job no., etc.)

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:-

Two in Steam, BID, FMV, Aux/Feed,'& Recir 5.(a) Applicable Construction Code and Class:

ASME B31.1.0 1967 Edition, 1972 Add (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Manufacturer Bechtel SGT-Aux.

Feedwater SGT-Wet-Layup

'Recirc.

SGT-Wet-Layup Recirc.

SGT-Blowdown SGT-Aux.

Feedwater SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown Nut SGT-Blowdown Manufacturers Serial Number DB-1,"EB-1,-5,& 6 ES199601526-118 ES199601526-111 ES199601526-111 ES199601526-111 ES199601526-110 ES199601526-118 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 National Board No.

Other Identification N/A Main Steam, Feedwater, Blowdown, Wet-Layup Recirc. &

Aux. Feedwater Sys.

N/A Elbow, Pipe, 4 in. 90 deg. Long Rad, Sch.80, Btt Wid, SA-234 Gr.

WPB NIA Valve, 2 in., gate, 800#, ASME SA-105, Mark #19 N/A Pipe, 2 in. Sch. 80, ASME SA-106 Gr.B N/A Flange, 2 in., 150 lb., Raised Face, Sch.40, Socketweld, ASME SA105 N/A Clamp, Pipe Anchor Base, 2 In.

for PG-41 / PG-43 per Drwg.#

FSK-MP-0571SH0003 & 0005, Part# 5.

NIA Pipe, 4 In. Sch. 80, Carbon Steel, ASTM A-106 Grade B N/A Pipe, 2 In. Sch. 80, ASTM A-335 Gr. P22 N/A Pipe, 2 In. Sch. 80, ASTM A-335 Gr. P22 N/A Elbow, Pipe, 2 In. 90 deg. 3000 lb.,

Socketweld; ASTM A-182 Gr. F 22 N/A Coupling, 2 in., 3000 lb.,

Socketweld, ASTM A-182, Tp. F22 NIA Angle, 4 In. X 4 in. X 114 In.,

ASTM A-36 N/A Nut, Hex. Head, 1/2 In. X 13 TPI, SA-194 Gr. 2H ASME

Repaired, Code Year Replaced, or Stamped Built 'Replacemen (Ye's or No) 1975

- Repaired/RepI No aced "2001 Replacement No 2001 2001 2001 2001 2001 2001 2001 2001 2001 2001 Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement 2001 Replacement No No No No No No No No No No No Name of Componet Piping System Elbow valve Pipe Flange Pipe Clamp Base Pipe Pipe Pipe Elbow Coupling Angle

Eye Nut Plate, C.S.

Angle Pipe Clamp Spring Can Fitting Elbow Elbow Angle Tube Steel Radiographic Plug Pipe Elbow Radiographic Plug Concentric Reducer SGT-Blowdown SGT-Blowdowwn SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Maln Steam SGT-Feedwater SGT-Feedwater SGT-Feedwater SGT-Wet-Layup Recirc.

ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-1 10 ES199601526-110 ES199601526-1 10 ES199601526-11O ES199601526-110 ES199601526-110 ES199601526-109 ES199601526-109 ES199601526-109 ES199601526-110 ES199601526-110 N/A Eye Nut, Weldless, 1/2 In.,

Grinnell, Fig. 290N N/A Plate, Steel, 1/2 In. X 48 In. X 96 In., ASTM-A36 N/A Angle, 1 In. X I In. X 1/4 In.,

ATSM A-36 N/A Clamp, Pipe, 2 In., for use on Grinnell Fig. 295N, with Hardware N/A Support, Variable Spring Can, Grinnell Figure # B-268N, Tp. A, Size 000 N/A Lateral, 2 In., 3000 lb.,

Socketweld, ASTM A-182 Gr. F22 NIA Elbow, Pipe, 2 In. 45 deg. 3000 lb.,

Socketweld; ASTM A-182 Gr. F 22 N/A Elbow, Pipe, 2 In. 90 deg. Long Rad, Sch.80, Butt Weld, ASTM A 234 Gr. WP22 N/A Angle, 3 In. X 3 In. X 114 in.,

ASTM A-36 N/A Tube Steel, 3 In. X 3 In. X 1/4 In.,

ASTM A-500 Gr. B N/A Plug, Radiographic, 1 114 In.

ASTM A675, Gr. 80 N/A Pipe, 16 In. Sch. 80, ASME SA 335 Gr. P22 N/A Elbow, Pipe, 16 In. 90 deg. Long Rad, Sch.80, Butt Weld, ASME SA-234 Gr. WP22 N/A Plug, Radiographic, 1 1/4 In.

ASTM A739, Gr. B22,

N/A Reducer, Pipe, Concentric, 3 In. X 2 In., Sch. 80 ASTM A-234, Gr.

WPB 2001 2001 2001 2001 2001 Replacement 2001 2001 2001 2001 2001 2001 2001 2001 2001 2001 Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement

7. Description of Work:

This plan was for the work to be done to the Main Steam, Blowdown, Feedwater, Aux. Feedwater and the Wet-Layup Recirc. lines that are associated with the replacement of #1 1 Steam Generator.

8. Tests Conducted:

Hydrostatic:[]

PneumaticG]

Pressure:

890 psi.

Nominal Operating Pressure:

Inservice: ]

Leakage: 2 Functional: []

Test Temperature:

3.22 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Replacement Replacement Replacement Replacement No No No No No No No No No No No No No No No

Sheet 3 of 3 FORM NIS-2 (Back)

9. Remarks:

A.qr.inna Yl.qv.*l~r Leakaae Test of the affected component was performed durnn the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section Xl required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Req.Guide 1.147. A Section Xl Surface Examination and Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

With an approved Relief Request from NRC, we were allowed to meet the 1993 Addenda of the 1992 Edition of Section II1. This addenda nermits the use of wire type IQI's (Image Quality Indicators) as an alternative to Plaque type IQI's for ra-diographic examinations. Plaque type IQ's are required by Section III, 1992 Edition which is referenced by Code Case N-416-1 and by the installation code which is Section I1l, 1989 Edition.

Applicable Manufacturer's Data Reports to be Attached

" Certificate of Compliance We certify that the statements made in this report are correct and that this rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date: N/A Repair/Replacement conforrns to the Charles H. Ballard

/ýý-,&-'/Engineering Technician Signed:

Date:

8/1/2002

¢L.

Owner or Owner's Drsignee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period

'Z-//- 0 Z to Gz - Z's -1=-

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

IJ1 &6 2-.26-G? A1lJ-",v 1".D

'/"7/

nfsp ctor's Signature National Board, State, and Endorsements Datedf,4y.

2002.=

I Date'(*z*f 5*(

200Z..

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI Calvert Cliffs Nuclear Power'Plant, Inc.-

Date:--'- 81112002 (name) 1650 Calvert Cliffs Parkway; -Lusby, MD 20657 S-

- Sheet I of 3.

(address)

Calvert Cliffs Nuclear Power Plant (name)

Unit: - One 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. SG-1-001d, ESP No. ES199601526 (address)

(P.O no,job no., etc) 3 Calvert Cliffs Nuclear Power Plant Dept.

Type Code Symbol Stamp: N/A

.Work Performd by:

(Authorization No.: N/A (name)

"Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 SectionXI Class:

One (address)

4. Identification of System:

System Number 064 System Name:

Reactor Coolant Systrm...

5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add;Class One (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition 6 Identification of Components Repaired or Replaced and Replacemeht Components:

Name of Componet "Name of, Manufacturer Manufacturers Serial Number

,National Board No.

Other Identificktion f S....ASME

Repaired, Code "Year R"eplaced, oi Stamped Built Replacemen (Yes or No)

Piping System Bechtel Tubing SGT-Reactor Coolant Flow Indication 2D Tubing SGT-Reactor Clamp Coolant Flow Indication Tubing Union SGT-Reactor Coolant Flow Indication Pipe SGT-Reactor Coolant Flow Indication Fitting SGT-Reactor Coolant Flow Indication 1" & under CC-9 ES199601526-112 ES199601526-112 ES199601526-112 ES199601526-112 ES199601526-112 N/A Reactor Cooling Sys.

Instrumentation N/A Tubing, 314 In. X.065 Wall, ASME SA 213, Tp. 316 N/A Clamp, Tube, 3/4 In., 2 Directional, Mark#400, Girard P/N 3/4T-SS-2D, A/SA 276 or 479, Tp. 304/316 N/A Union, Tubing, 3/4 In. Swagelok, P/N SS-12-TSV-6, ASTM/ASME A/SA182 or A/SA479, Tp. 316 N/A Pipe, lin. Sch 80, ASME SA-376, TP-316 1970 Repaired/Repl aced 2001 Replacementt 2001 Replacement 2001 Replacement 2001 NIA Fitting, 1 In. X 314 in. Pipe/Tubing 2001 Connector, Parker, PIN 12-1-ANV Replacement Replacement

7. Description of Work:

This plan was for the Reactor Coolant System Instrumentation Piping/Tubing and supports, one inch and under, work to support the replacement of #11 Steam Generator.

8. Tests Conducted:

Hydrostatic []

Pneumatic-]

Pressure:

N/_A psi.

Nominal Operating Pressure-Inservice: ]

Leakage: ]

Functional: L]

Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

1. Owner:

2. Plant:

No No, No No No No

Sheet Lof t;,

FORM NIS-2 (Back)

.9. Remarks:

No Section X1 Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct aid that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Syinbol Stamp.

N-/A Certificate of Authorization No.: N/A ExpirationDate:

N/A S/.Charles H. Ballard Signed:

On o/,ie./

Desnee,.,

Engineering Technician Date:

8/1/2002 SOwner or-Owner's De~igee, Tit*e IV Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z..-/f-Cl to &,- Z8 0?.

-and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the, Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damag6 of a loss of any kind arising from or connected with this inspection.

nsp-t-sgnCotmmissions:

NAto d 77 re, t

AAJ Z E deeI Inspect r's Signature National Board, State', and Endorsements Da20-a/

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the'Provisions of the ASME Code Section Xl

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

Date:

8/1/2002 (name) 1650 Calvert Cliffs Parkway; Lusby, MD' 20657 Sheet 1 of,"

(address)

2. Plant:

Calvert Cliffs Nuclear Power Plant Unit:

One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. SG-1-001e, ESP No. ES199601526 (address)

(P.O. no.job no., etc)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

Type Code Syr*bol Stamp: N/A Authorization No.: N/A (name)-

Exp Date: N/A 1650 Calvert'Cliffs Parkway,- Lusby, MD 20657 Section XI Class: One & Two (address)

4. Identification 6f System-SystemNumber -64/83 System Name:

Steam Generator Replacement 5.(a) Applicable Construction Code and Class:

A1SC, Manual of Steel Construction, 6th Ed..1963 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Coffiponents:

Ci Con rame of

-Namne of omponet ' Manufacturer rip. Support Combustion Engineering Plate SGT-Steam

-Generator Supports Stud SGT-Steam Generator Supports Nut SGT-Steam Generator Supports Nut SGT-Steam Generator Supports Plate SGT-Steam Generator Supports Plate SGT-Steam Generator Supports Capscrew SGT-Steam Generator Supports Manufacturers Serial Number N/A ES199601526-107 ES199601526-107 ES199601526-107 ES199601526-107 ES199601526-107 ES199601526-107 ES199601526-107 National Board No.

N/A N/A N/A N/A N/A N/A N/A N/A Other Identification

11 Steam Generator Snubber and Sliding Base Plate, Steel 1/4 In. ASME SA-36 Stud, 2 1/4 In. X 14 in. X 4 1/2 TPI, ASTM A-193, Gr. B7 Nut, Heavy Hex, 2 114 in. X 4 1/2 TPI, ASTM A-194 Gr. 7 Washer, 2 1/4 In., Circular Hardened, ASME SA-193 Gr. B7 Plate, 1/2 In., ASTM B-22, Tp. E Plate, Shim, AISI 4140, 125 RIMS Finish, Heat-Treat to RC-40 Capserew, 1/2 in. X 13 TPI, UNC 3A, Socket-Head, Countersunk per ASTM F-835 ASME

Repaired, Code Year -Replaced, oi Stamped Built, Replacemen (Yes or No) 1970 Repaired/Repl No

'aced 2001 Replacement No 2001 Replacement No 2001 Replacement No 2001 Replacement No 2001 Replacement No 2001 Replacement No 2001 Replacement No

7. Description of Work:

This plan was for the work on the Sliding base and the brackets that hold #11 Steam Generator in place.

8. Tests Conducted:

Hydrostatic []

Pneumatic-]

Pressure:

N.A psi.

Nominal Operating Pressure:

Inservice: ]

Leakage. []

Functional: ]

Test Temperature:

N/.AŽ Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

'N Cc Cotr

Sheet A.of L FORM NIS-2 (Back)

.9. Remarks:

A Section Xl VT-3 Visual Examination of the affected component support was performed prior to the system" being returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

Engineering Technician Date:

8/1/2002 Owner or Owner's Designee, Tte Certificate of Inservice Inspection I, the undersigned, holding a'valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z-/1-O to 6-Zd-r".

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any, warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

-Commissions:

AJS - Z Z CA i.4~ A-7.

e InspectorSignature National Board, State, and Endorsements Dat~eý qjkt 82001.

-FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Requied by the Provisions of the ASME Code Section XI

1. On

,r:Calvert Cliffs Nuclear Power Plant, Inc.'!

.Date:

81112002

1. Owner:

811/2002 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657...

Sheet I of 2

"(address)

2. Plant:

Calvert Cliffs Nuclear Power Plant unit:

one (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. SG-1-002a, ESP No. ES199601526

-2 (address)

(P.O. no.,job no., etc.).

-Calvert Cliffs Nuclear Power Plant Dept.

Type Code Symbol Stamhp: N/A

3. WorkPerformedby:

Authorization No.: N/A Exp Date: N/A 1650-Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One & Two (address)

4. Identification of System:

SystemNumber 64183 SystemName:

Steam Generator Replacement 5.(a) Applicable Construction Code and Class:

ASME B&PV Code Sect. III, 1965 Edition, Winter 1967 Add; Class

-C-Cases: 1332,332-4, 1359-f 1

(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of Manufacturers Componet Manufactire Serial Number National Board No.

Other Identification ASME Repaired,'

Code Year Replaced, oi Stamped

- Built -Replacemen (Yes or No)

Pressure Vessel Combustion

.Engineering Steam Babcock &

Generator Wilcock Canada CE 67505 4621CCNP-21-9000 SN: 7811-02 20923

12 Steam Generator 197 Steam Generator Lower Assembly, Primary Side Head, Tubes and Secondary Shell up to Transition 2 needm 2001

' Replacement *.

7. ýDescription of Work:-,

This plan was for the replacement of the primary'side head, tubes, and secondary, side shell up to the transition area-of #12 Steam Generator. This also documents the reconfiguration of the Feed Nozzle and Surface Blowdown Nozzle.

8. Tests Conducted:

Hydrostatic:E-PneumaticS[

Nominal Operating Pressure:

'Pressure:

890 psi.

Test Temperature:

Inservice: El Leakage: 2 532"

-Deg.F NOTE: -Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x,11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3)-ch sli-et is numbered and the number of sheets is recorded at the top of this form.

IWIIp IPnflirPEIfI{flI res Yes Functional. El I10M R

alen-red/Rurn ves

Sheet 2 of 2 FORM NIS-2 (Back),

9. Remarks:

A Section Xl VT-1 Visual Examination of the replacement threaded fasteners was performed to satisfy Section X1 Pre-Service NDE Requirements.

A Section Xl System Leakaqe-Test of the affected component was performed durinq the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Reg.Guide 1.147. A Section Xl Surface Examination, Eddy Current Examination and Ultrasonic Examination of the affected component was performed to satisfy Section Xl Pre-Service NDE Requirements.

With an approved Relief Request from NRC, we were allowed to meet "

the 1993 Addenda of the 1992 Edition of Section III. This addenda permits the use of wire type IQO's (Image Quality Indicators) as an alternative to plaque type IQI's for radiographic examinations. Plaque type IQI's are.

required by Section III, 1992 Edition which is referenced by Code Case N-416-1 and by the installation code which isSection III, 1989 Edition.

Applicable Manufacturer's Data Reports to be Attached "Certificate of Compliance R

We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A 7

6 Charles H. Ballard Signed:

Engineering Technician Date:

8/1/2002 Owner or Owner's ferignee, Titte Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have 'nspected the components described in this Owrner's Report during the period Z.-//-

d 2 to

'7'- / 1- 0 Z..

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirerients of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermiore, neither the Inspector nor his employer shall be liable in any manner for afiy personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

AJIe.IX~

4

/"Z 7 4

InspcdLs Signature National Board, State, and Endorsements DatLe'..

99,f 200 -0

('

FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed One Day's Production Pn. 1 ni dl

1. Manufactured and certified by Babcock & Wilcox Canada, 581 Coronation Boulevard. Cambridge. Ontario NIR 5V3 (name and address of NPT Cartifate Holder)

2. Manufactured for SGT Ltd. P.O. Box 1219, Lusby, Maryland 20657 (name and adresas of Purchaser)

3. Location of Installation Calvert Cliffs Nuclear Powver Plant (CCNPP) Units 1 &2, Lusby, Maryland 20657-4702 (name and address)

4. Type! 7811 E001 Rev. 6

- See attached List #1*-

See LIst #1.......

2001..

(draw-g no)

(marl sper. no.)

(tenlm e strength)

(CRN)

(year buft)

5. ASME Code, Section Ill, Division 1:

1989 No Addenda 1

See attached [

I (edftmon)

(a Iddenda, ate)

(cass)

(Code Case no.)ist#2

6. Fabricated In accordance with Const. Spec. (Div. 2 only)

Revision Date

7. Remarks:

Secondary side hydrotest has not been performed. Post-hydrotest final NDE hias'not been perforrhed on secondary side.

Previous N-2 form for primary head (National Board No. 403) attached.

8. Noam. thickness (in.) See List #3 Min. design thickness (in.) See List #3 DIa. ID (ft & In.) See List #3 Length overall (ft & In.) -39'-8 7/16" 9 When apolicable. Certificate Holders' Data Recorts are attached foreach item of this reoort

10. Design pressure See List #4 psI. Temp. See List #4

°F, Hydro. test pressure See List #4 at temp. °F (when applicable)

Part or Appurtenance Nardonal Seril NuberBoard No.

Seial Number

In Numerical Order (1) 7811-02 197" (2)

(3)

(4)

(6)

(7)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(18)

(17)

(18)

(20)

(21)

(22)

(23)

(24)

(25)

National Part orAppurtenance Board No.

Serial Number in Numerical Order (26)

(27)

(28)

(29)

(30)

(31)

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(39)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

Pei I of 4 I

I

"FORM N-2 (Back-Pg. 2 of.)

Certificate Holder's Serial NoS.

7811-02 through

- CERTIFICATION OF DESIGN Design speclfications certified by E.S. Broczkowski Jr.

P.F_ State MD

_'Reg. no.

12424

-tMena~ ppkeabe)

Deslgn report. certified by L Vzi P.E. Prov. Ont Reg. no. 48244208 bthenap~kabe).

C (1ERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these)

Steam Generator Sub-Assembly (See Fig. 1) conforms to the rules of construction of the ASME Code, Section ill, Divsiron 1.

NPT Certificate of Authorization No..

N-2791, Expires Januar y23, 2004 Date

&iLZ9AI Name Babcock & Wilcox Canada -

Signed

'4 NT Ce"Ctle~.J14arn&'JUR CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or ProvInce of Ontario and employed by Technical Standards and Safety Authority of Ontario have Inspected these items described In this Data Report on4

, and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances in accordance with the ASME Code,Section III, Divislo-n 1. Each part listed has been authorized for stamping on the date shown above.

By slgnirng this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied; conceming the equipment described in this Data Report.- Furthermorea neither the Inspectornorhis employershall be liable In any mannerforany personal Injury or property damage or loss of any kind arising from or connected with this Inspection.

Date S"

gd$eLig Commissions)-

ialn

.1 (Auftftedrser LNarL B.Jndtenoomrneant.s) and state 0: ploY, and no4

1. Manufactured and certified by Babcock & Wilcox Canada, 581 Coronatio-nBoulevard, Cambrld-goe Ontario

2. Manufactured for SGT Ltd. P.O. Box 1219, Lusby, Ma1ryland 20657.

3. Location of Instalation CCNPP Units 1&2, Lusby, Maryland 20657-4702

4. Type:

5ASME Code:

List #1:

Material Specification Tensile Strength Primary Head SA-508 CI. 3a so ksi PdmaryHead Inlet Nozzle..

SA-508 Ci. 3a.

90 ksi Primary Head Outlet Nozzle SA-508 CL 3a 90 ksi Base Support Stool SA-533 Type B Cl. 1 80 ksl Tubesheet SA-508 Cl. 3a 90 ksl Tubes SB-163 N (Alloy 690) 80 ksl Secondary Side Shell Cans SA-508 Cl. 3a 90 ksi Secondary Side Shell Cone SA-508 Cl. 3a,-

90 ksi Primary Manway Covers SA-533 Type B CI. 1 80 ksi Secondary Handhole Covers SA-533 Type B Cl. 1

-80 ksi

-Secondary-Inspection Port Covers..

- SA-533 Type B C1___-80 ksi.-..

Small Nozzles - Pdmary Side SB-166 N06690 69.9 ksl Small Nozzles-Secondary Side SA-350 LF2 70 ksi Blowdown Nozzles SFA 5.5 E7018-Al Buildup 70 ksi Recirculation Nozzle SFA 5.5 E7018-AI Buildup 70 ksl List #2:

Code Cases:

N-20-4 N-71-15 N-41 1-1 N-474-1 2142-1 2143-1 N-401-1

________"N-416-1 List #3:

Primary Head 7"

7.000" Tubesheet 21.875" 21.500" _

Secondary Side Shell Cans

1) Shell above Tubesheet 4.375" 4.25" 13'-3 3/16"

2) Remainder of Shell 2.875" 2.77" -

13'-3 3/16" Secondary Shell Cone

1) Above Secondary Shell Can 5.125" 5.000"

2) Conical Portion 4.625" 4.500" Tubes 0.042" 0.038" -

0.666" Nom.

Attachment to FORM

-2 CERTIFZ TE HOLDERS DATA REPORT FO R IDENTICAL Page 3 of 4 Attachment to FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES Certificate Holders Serlal Nos. 7811-02 through National Board Nos.

197 -

through

NUCLEAR PARTS AND APPURTENANCES Certificate Holder's Serial Nos.

7811-02 through.

National Board Nos.

197 through

1. Manufactured and certified by Babcock & Wilcox Canada, 581 CoroatILon Boulevard, Cambridge, Ontario

2. Manufactured for SGT Ltd. P.O. Box 1219, Lusby, Maryland 20657

3. Location of Installation - CCNPP Units 1&2, Lusy. Maryland',*

2067470'2

4. Type:

SASME Code:

LUst #4:

Secondary Side Primary Side Desin Pressure 1015 sla 2500 a

Design Temperature 550"F; 6509F Hydrotest Pressure 3125 psia Hydrotest Temperature 70i'F FIGURE 1 GENERAL ARRANGEMENT Page4of4 N

1

..r;

FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by thte Provisions of the ASME Code, Section [if

_Not to Exceed One Day's Production

1. Manufactured and certified by The Japan Steel Works, Ltd. Muroran Plant/4-Chatsu-machi, Muroran, Hokkaido, 051-8so 5 Imam*. Wer addoress of NPT Csrrtdcr1=a I1oIder

,7aoa,,

2. Maj'ulactured for S1CrnioBvd, Cambridge, Ontario, I5V Coda

3. Lorationotinstallatlon* Calvert, Cliffs Nuclear Pow~er Plant Unit I ry 2 Calvprt Contrmy, M;R

[ame vW ddrettUIA t

-4.

Type; 11147951ff, lýeV. 2

-SA-SOS8, Cl. 3a

-Min. S0ksi ls fdeawrg no.)

(zmatl. Spec.nl tde floie t

S~a tfW thl ic~N1 (year bIRF S SICoeSetoIlivso1:

1989 No addenda I1

5. SMSCod.

Sctin II.Divalo 1:*

dde~adate)

(081:.)

Icade case RajI G. Fabricated in accordance with Conat. Spec. jDIv. I. only) 0-.

Revision Data 7 ~Aernae.!

IfYdrostzkUic test is not performed in The Japan Steel Works, Ltd.

Cladding.thickness is mint. 0.2011 from base metal.

Cladding materials are SFA-5.4, AWS Cl. E3OSL-l6 + E308L-16 and SFA-5.9 ER309L +* E)R30BL.

P.O. No. :C153302064 JSW Job No.. :FRE-4305 treat No. -:9SW61-1-1 JSI4 PC. -No.

83. Nom. thic~tness (in.-

7-1/4" Mint. design thick~is s fin.)

7-W" OLID.(ft&in.1) 5 '470..1!.

Length overill If%&

in.) S-ieZ.72"j S. When applicable, Certificate H~olders' Data Reports are attached for each Item of %W1s report:

Part or'Appurtoenace 14alional Serile Number Board No.

In Numericalt Order (281 (27)_

(28)

(311 132) 133)

(34)

(35)

(371 (38)

(391 (401 )v (41)

NUVIN ~8 (42) rn 4n (44) 145)__

Q.G. 16 (471- __________

A (48)

(49)

(501

10. Design pressure -

/IA psi Temp.

VA OF.

H.ydra. test pressure N/&A ittemp. *F wSuppleinental informaiotti n the fonm of lists. skatchas. ot drewtings may be used provided III stza Is SY xA 11I. 121 ftnlornrecon hr Items 2 and 2 on this Oars 114P~rt Is Imcludue en each sheet. (3) acccl sheet is numbered end ml. numbe of aheats Is recardedatithe top of this form.

112/81 Thli form tE200040) mary be obtalned from thle Wree Oept:. ASME, 22 Law Ctive. Box 2300. FaIrfield. NJ 07007-2300.

-Pg. Iof-2 Partor Appurtenance National Social Numbir Board No.'

In Numerical Order*

1047 403 (2)

(3)

14) i5)

(6)

(7)

(101 till (14)

(19) 1201 (221) 1241 (251 JQA-9 9-16 1 a2-

JQA-99-16 i FORM N-2 (Back - Pg.2 of 2__.},

Certificate Holder's Serial Nos.

07 through Design specifIcailons certified by Design report certified by."

CERTIFICATION OF DESIGN

_N/A 4whin appacaea~la (Whi'n lpplkawal "P.S. Scale

/A.

Reg. no.

/

P.E. State

NIA, F/eg. no.

X/A CERTIFICATS OF COMPLIANCE "We certify that the statements made In thisreport are corrc and that thi conforms to the rules of construction of the ASME Code, Section Ill, Divisk (these)

Yart NPT Certificate of Authorization No Data ZuIT 28, 1999 Namea.

1(-2725 The Japan Steel Works, Ltd Muroran Plant IN Pr C a rd hc lt : x et e I 7*S g n e o Expires CECJ1E I21,N2001N

(\\ uthedzd 'SW*stItvtI CERTIFICATE OF INSPECTION.

1, the undersIgned, holding a vaflid commission Issued by the National Board of Boifer and Pressure Vessel inspectors and the State or Province of ILLINOIS and employed by ----.

S-...

a

.Co.

of H'.FOD CT.

have Inspected these Items described In thi Data Report a and state tha tothe best of myknowledge and bellef, the CerritIcEae Holder has fabricated these parts or aPPurtenances/n accordaAce wfti th'e ASMw Coh,Section III, Division 1. Each part listed has been authorlzedc for stamping on the date shown above.

By signing this certificate, neithir the lnspecto'r nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspectot nor his employer shadlb a liable In any manner for any personal injury or propery damage or loss of any kind arising from or'connected with this inspectlon.

DaZL gne

!2

- "-=I Commissions

.nrnz4g 5Z9SC!OSJ H. KISHIDA Na # 10104 N, B'_ A It~%ad-)

94, liic.

fioACM6"t' amtd Xtatt w3PCOY.

W~4 M041 "A" /./,44 7/:

16' BWc INCOMING INSPECTION SEP S-1999 QC. 16

APPROVED

/

KISHIDA

(

,)IIEWED AUG-.1 20M

-set 14 1*5y

2 i

..1

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section XI

1. Owner:

-,Calvert Cliffs Nuclear Power Plant, Inc.

"(name)'

1650 Calvert Cliffs Parkway; Lusby, MD 20657

( (address)

. 'Calvert Cliffs Nuclear Power Plant

2. Plant:

I..

I (name) 1650 Calvert Cliffs Parkway; Lusby, MD '20657-Date::-

81112002 Sheetlof 2 rUnit:

One' SR&R No. SG-1-002b, ESR No. ES199601526 (address)

(P.O. no,job no., etc.)

3. WorkPerformedby: -Calvert Cliffs Nuclear Power Plant Dept.

TyeCode Symbol 3b(name)

Auth6rizati6n N6.: N/A.

Exp Date: N/A iRA C0alv.ert Cliffs Parkway. Lusbv. MD 20657 Section XI Class:

Ore' (address)

4. IdentificationofSystem:

SystemNumber 064 System Name:

Reactor Coolant System.

5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class One (b) Applicable Sect XI Ed. for Repairs/Replacement

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Manufacturer Manufacturers Serial Number 1998 Edition

'National Other Board No.

Identification ASME

Repaired, Code Year Replaced, oi -Staa*id Built Replacemen (Yes or No) 30" & 42" CC-1 Piping N/A Reactor Coolant Piping 1970 Repaired/Repi Yes 1970 -1 Repaired/Rept seed

7. Description of Work:

This plan was for the Reactor Coolant Hot Leg and Cold Leg Pipe 'welding to supp6rt the replacement of #12 Steam Generator.'

8. Tests Conducted:

Hydrostatic:f-l Pneumatic]

Pressure:

2273.

psi.

Nominal Operating Pressure.

Inservice. EL Leakage: ]

Functional E]

Test Temperature:

L3.2 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided (1) size is 8-1/2 in. x 1I in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

'Name of Componet Piping System Combustion Engineering Yes'

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakage Test of the affected component was performed dudnq the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section X1 required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Rea.Guide 1.147. A Section Xl Surface Examination and Ultrasohic Examination of the affected component was performed to satisfy Section Xl Pre-Service NDE Requirements.

With an approved Relief Request from NRC, we were allowed to meet the 1993 Addenda of the 1992 Edition of Section II1. This addenda permits the use of wire type IQO's (Image Quality Indicators) as an alternative to plaque type IQI's for radiographic examinations. Plaque type IQI's are required by Section III, 1992 Edition which is referenced by Code Case N-416-1 and by the installation code which is Section 111,.1989 Edition.

Applicable Manufacturer's Data Reports to be Attached "Certificate of Compliance We certi* that the statements nmade-in this report are correct and that this Reoair/ReoIacemnent conforms to the rules of the ASM-E Code,Section XI.

Type Code Symbol Stamp:

N N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles Hl. Ballard Signed:

,_Engineering Technician Date:

8/1/2002 Owner or Owner's gnee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z-//-O Z to 6 - Z8-0 Z?., and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures descibed in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer inakes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspect6r i6dt hbi' employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

AfrpK,/

LI or, s~i6nure "NtCommissions:iol

oaj,

,,knor Ap-e or's Signature National Board, Statefand Endorsements Date 20 200 I-

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

Calvert CliffsNuclear Power Plant, Inc.

Date:

8/2/2002 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 3

2. Plant:

Calvert Cliffs Nuclear Power Plant Unit:

-One (name) 1650 Calvert Cliffs Parkway; Lusby, MD '20657 R&R No. SG-1-002c, 'ESP No. ES199601526 (address)

(P.O. no., job no., etc.)

I 1

1

,, I

,Type Code Symbol Stamp: N/A

3. Work Performed by:

Calvert Cliffs'Nuce'ar Power Plant Dept.

Authorization No.: N/A (name)

I Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

Two (address)

4. Identification of System:

System Number Var.'*- SystemName:

Main Stearmi, B/D, FIW, Aux/Feed, & Recir 5.(a) Applicable Construction Code and Class:

ASMME B31.1.0 1967 Edition, 1972 Add (b) Applicable Sect XI Ed. for Repairs/Replacement..

1998 Editionh

6. Identification of Compbnents Repaired or Replaced and Replacemeint Components:

Name of Manufacturer Bechtel SGT-Aux.

Feedwater

.SGT-Wet-Layup Reclrc.

SGT-Wet-Layup Recirc.

SGT-Blowdown SGT-Aux.

Feedwater SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown Manufacturers Serial Number DB13, EB-I,-5,& -6 ES199601526-118 ES199601526411 ES199601526-I1l ES199601526-111 ES199601526-110 ES199601526-118 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 National Board No.

Other Identification N/A Main Steam, Feedwater, Blowdown, Wet-Layup Recire. &

Aux. Feedwater Sys.

N/A Elbow, Pipe, 4 in. 90 deg. Long 1Rad, Sch.80, Btt Wld, SA-234 Gr.

WPB N/A Valve, 2 In., gate, 800#, ASME SA-105, Mark#19 N/A

Pipe, 2In. Sch. 80, ASMESA-106 Gr.B_,

N/A Flange, 2 In., 150 lb., Raised Face, Sch.40, Socketweld, ASME SA105 N/A Clamp, Pipe Anchor Base, 2 In.

for PG-41 / PG-43 per Drwg.#

FSK-MP-0571SH0003 & 0005, Part# 5.

N/A Pipe, 4 In. Sch. 80, Carbon Steel, ASTM A-106 Grade B N/A Pipe, 2 In. Sch. 80, ASTM A-335 Gr. P22 NIA Pipe, 2 In. Sch. 80, ASTM A-335 Gr. P22 N/A Elbow, Pipe, 2 In. 90 deg. 3000 lb.,

Socketweld; ASTM A-182 Gr. F 22 N/A Coupling, 2 In., 3000 lb.,

Socketweld, ASTM A-182, Tp. F22 N/A Angle, 4 In. X 4 In. X 114 In.,

ASTM A-36 N/A Nut, Hex. Head, 112 In. X 13 TPI, C2A InA 9--*

-1W ASME

Repaired, Code Year Replaced, oi Stamped Built Replacemen (Yes or No) 1975 Repaired/Rep]

-No aced 2001 Replicement No 2001

,2001 200f 2001 2001 2001 2001 2001 2001 2001 2001 Replacement Replacement, Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement No No No No No No No No No No No Name of Componet Piping System Elbow valve

-Pipe Flange Pipe Clamp Base Pipe Pipe Pipe Elbow Coupling Angle Nut

Eye Nut SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown Spring Can SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Blowdown SGT-Main Steam' SGT-Feedwater SGT-Feedwater SGT-Feedwater, SGT-Wet-Layup Recire.

Plate, C.S.

Angle Pipe Clamp ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 ES199601526-110 "ES199601526-110 ES 199601526-110 ES199601526-110 "ES199601526-110 ES199601526-108 ES199601526-109 ES199601526-109 ES199601526-109 ES199601526-111 2001 Replacement N/A Eye Nut, Weldless, 1/2 In.,

Grinnell, Fig. 290N N/A Plate, Steel, 1/2 In. X 48 In. X 96 In., ASTM-A36 N/A Angle, 1 In. X I In. X 114 In.,

ATSM A-36 N/A"--

Clamp, Pipe, 2 In., for use on Grinnell Fig. 295N, with Hardware N/A Support, Variable Spring Can, Grinnell Figure # B-268N, Tp. A, Size 000 N/A Lateral, 2 In., 3000 lb.,

Socketweld, ASTM A-182 Gr. F22 N/A Elbow, Pipe, 2 In. 45 deg. 3000 lb.,

Socketweld; ASTM A-182 Gr. F 22 N/A Elbow, Pipe, 2 In. 90 deg. Long Rad, Sch.80, Butt Weld, ASTM A 234 Gr. WP22 NIA Angle, 3 In. X 3 In. X 1/4 In, ASTMA.-36 N/A Tube Steel, 3 In. X 3 In. X 1/4 In.,

ASTM A-500 Gr. B N/A Plug, Radlogral'hic, 11/4 In.

ASTM A675, Gr. 80 N/A Pipe, 16 in. Sch. 80, ASME SA 335 Gr. P22 1

NIA Elbow, Pipe, 16 In. 90 deg. Long Rad, Sch.80i Butt Weld, ASME SA-234 GC. WP22 N/A Plug, Radiographic, 11/4 In.

ASTM A739, Gr. B22 NIA Reducer, Pipe, Concentric, 3 In. X 2 In., Sch. 80 ASTM A-234, Gr.

WPB Replacement Replacement Replacement" 2001 Replacement 2001 2001 2001 2001 2001 2001 2001 2001 2001 2001 Replacement Replacement Replacement, Replacement Replacement Replacement,,

Replacement Replacement Replacement Replacement 7: Description ofWork:

This plan was for the work to be done to the Main Steam, Blowdown, Feedwater, Aux. Feedwater and the Wet-Layup Recirc. lines that were associated with the replacement of #12 Steam Generator.

8. Tests Conducted:

Hydrostatic

,l Pneumaticdj Nominal Operating Pressure:

Inservice:EL Leakage.2-Functional:EL-]

Pressure:

890 "psi.

Test Temperature:

Q_2 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this re15ort is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

2001 2001 2001 Fitting Elbow Elbow Angle Tube Steel Radiographic Plug

Pipe, Elbow Radiographic Plug Concentric Reducer No No No No No No No No No No No No No No No

Sheet 3 of 3 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Code Case N-416-1 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-1 and Req.Guide 1.147. A Section X1 Surface Examination and Ultrasonic Examination of the affected component was performed to satisfy Section X1 Pre-Service NDE Requirements.

With an approved Relief Request from NRC, we were allowed to meet the 1993 Addenda of the 1992 Edition of Section Ill. This addenda permits the use of wire type IQI's (lmage Quality Indicators) as an alternative to plaque type IQI's for radiographic examinations. Plaque type IQO's are required by Section III, 1992 Edition which is referenced by Code Case N-416-1 and by the installation code which isSection III, 1989 Edition.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that tUis Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed:

Engineering Technician Date:

8/2/2002 CCA---

O nrdor~iw~nte'ssngznee, Ti ti e Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components descnrbed in this Owner's Report during the period 2-/(-02.-

to r,--.-)

Z-., and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

)seComissions:

/-48 a

Z B" 4t17e an Eorseent InspectoT/s Signature National Board, Stater, and Endorsements Date*

. 200_Z_*

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

Calvert Cliffs Nuclear Powe# Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD.20657 (address)

Calvert Cliffs Nuclear Power Plant (name) -

2. Plant:

1650 Calvert Cliffs Parkway; Lusby, MD 20657 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Date:

81112002 Sheet I of A-.

Unit:

One R&R No. SG-1-002d,.ESP No. ES199601526 S(P.O. no, Job no., etc.).

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class:

One (address)

4. Identification of System:

SystemNumber, 064

_System Name:,

Reactor Coolant System 5.(a) Applicable Construction Code and Class:. ASME B31.7 1969 Editibn,Summer 1971 Add; Class One' (b) Applicable Sect XU Ed. for Repairs/Replacement 1998 Edition

6. identification of Components Repaired or Replaced and Replacement Components:

"Repaired,

-:ASME Code Name of

- Name of I Componet

--Manufacturer Manufacturers Serial Number National Board No..

Identification, Year Replaced, oe Stamped Built Replacemen (Yes or No)

Piping System Bechtel Tubing SGT-Rcactor Coolant Flow Indication 2D Tubing SGT-Reactor Clamp Coolant Flow Indication Tubing Union Pipe Fitting SGT-Reactor Coolant Flow Indication SGT-Reactor Coolant Flow Indication SGT-Reactor Coolant Flow Indication 1" & under CC-9 ES 199601526-112 ES199601526-112 ES199601526-112 ES199601526-112 ES199601526-112 N/A Reactor Cooling Sys.

1970 Instrumentation N/A Tubing, 3/4 in. X.065 Wall, 2001 ASMESA213, Tp. 316 N/A Clamp, Tube, 314 In., 2 2001 Directional, Mark#400, Girard

. P/N 3/4T-SS-2D, A/SA 276 or479, Tp. 3041316 NIA Union, Tubing, 3/4 in. Swagelok, 2001 PIN SS-12-TSW-6, ASTM/ASME A/SA182 or A/SA479, Tp. 316 N/A Pipe, 1In. Sch 80, ASME SA-376, 2001 TP-316 NIA Fitting, 1 in. X 3/4 in. Pipe/iubIng 2001 Connector, Parker, PIN 12-1-AW

7. Description of Work:

This plan was for the Reactor Coolant System Instrumentation Piping/Tubing and supports, one inch and under, work to support the replacement of #12 Steam Generator.

8. Tests Conducted:

Hydrostattc:-

Pneumaticf]

Pressure:

N/A psi.

Nominal Operating Pressure:

Inservice: [3 Leakage E]

Functional El Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the

,,,,,hp-

,'F-,-'pt:

i-c re-rorded at the tot of this form.

Repalred/RepI No Repalred/Repl aced Replacement Replacement Replacement Replacement Replacement No No No No No No

I-Sheet &of ;L FORM NIS-2o (Back)

-9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/KA Certificate of Authorization No.: N/A Expiration Date:

NI/A

,L~ Q /~

2 //Charles H. Ballard Signed:

Engineering Technician Date:

8/1/2002 Owner or Owner's Designee, Title ICertificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston; RI have inspected the components described in this Owner's Report during the period

'2 -

) Z__" to

( 0

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspectionx I

sJ/,

J g-atr Commissions:

Board8,Z(

tatI an

)

Edr t

Inspector's Signature National Board, Stat;. and Endorsements Datea-mz4L4-..

200 Z-I

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required Required by the Provisions of the ASME Code Section Xl

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

Date:

-8/1/2002 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 6f ;.t

-- - (address)

2. Plant:

Calvert Cliffs Nuclear Power Plant

'unit:

One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. SG-1-002e, ESP No. ES199601526 (address)

(P.O.no.,jobno,etc)

Type Code Syinbol Stamp: N/A

3. WorkPerformedby:

Calvert Cliffs Nuclear Power Plan-t Dept.

Authorization No.: N/A (name)

Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XIClass: One & Two (address)

4. Identification of System:

SystemNumber 64/83

..SystemName:., Steam Generator Replacement 5.(a) Applicable Construction Code and Class:

AISC, Manual of Steel Construction, 6th Ed. 1963 (b) Applicable Sect XI Ed. for Repairs/Replacement

. 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Y ASME "R Repaired, Code' Name of Name of Manufacturers' National Other Year Repl-aced, ox Starnpee Componet Manufacturer Serial Number Board No.

Identification Built Replacemen (Yes or No)

Comp. Support Combustion' N/A N/A 012 Steam Generator Snubber

'1970 Repaired/Repi No Engineering and Sliding Base aced Plate SGT-Steam ES199601526-107 N/A Plate, Steel 114 in. ASME SA-36 2001 Replacement No SGenerator Supports Stud

SGT-Steam* ='° ES199601526-107 NIA Stud, 2 1/4 In. X 14 In. X 4 1/2 2001 Repiacement No Generator Supports TPI, ASTM A-193, Gr. B7 Nut SGT-Steam ES199601526-107 N/A Nut, Heavy Hex, 2 1/4 in. X 4 1/2 2001 Replacement No Generator Supports TPI, ASTM A-194 Gr. 7 Nut SGT-Steam ES199601526-107 N/A

-Washer, 2 114 In., Circular 2001 Replacement No Generator Supports Hardened, ASME SA-193 Gr. B7 Plate SGT-Steam ES199601526-107 N/A Plate, 1/2 in., ASTM B-22, Tp. E 2001 Replacement No Generator Supports Plate SGT-Steam ES199601526-107 N/A Plate, Shim, AISI 4140, 125 RMS 2001 Replacement No Generator Supports Finish, Heat-Treat to RC-40 Capscrew SGT-Steam ES199601526-107 NIA Capscrew, 1/2 In. X 13 TPI, UNC 2001 Replacement No Generator Supports 3A, Socket-Head, Countersunk per ASTM F-835

7. Description of Work:

This plan was for the work on the Sliding base and the brackets that hold #12 Steam Generator in place.

8. Tests Conducted:

Hydrostatic-[]

Pneumatic'l Nominal Operating Pressure.

Inservice. El Leakage El Functional.E]

Pressure:

NIA psi.

Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 3.of 0-FORM NIS-2 (Back)

9. Renar's" A Section XA VT-3 Visual Examination of the affected component support was performed prior to the system being returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate-of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A ExpirationDate:

N/A Charles H. Ballard Signed:

Engineering Technician-'

Date:

8/1/2002

""wner or Owner's ~esignee, Tare Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period 2-//-4O 7_-.

to

, -Z -0Z

,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinatioiis and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his "employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

,t{*C'22-A/J

.,flA<4/7 6rrspegor's Signature National Board, Stateland Endorsements Date 2002

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the Provisl6ns of the ASME Code Section XI

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc.

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Date:

81112002 Sheet i of 2 (address)

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Unit:

One, R&R No. SG-1-003, ESP No. ES199601526 (address)

3. Work Performed by:

Calvert Cliffs Nuclear Power Plant Dept.

(name) 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)

4. Identification of System:

System Number 064 (P.O. no job no, etc )

Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A "

Section XI Class:

One System Name:

Reactor Coolant System 5.(a) Applicable Construction Code and Class:

ASME B31.7 1969 Edition, Summer 1971 Add; Class One:

(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Name of

,Componet Manufacturer Piping System Bechtel Manufacturers Serial Number 1" & under CC-9 National Board No.

Other Identification N/A Reactor Cooling Sys.

Instrumentation ASME

Repaired, Code Year Replaced, o0 Stamped "Built Replacemen (Yes or No) 1970-Repaired/Repi No aced

7. Description of W6rk:

This plan was for the Reactor Head Vent Piping/Tubing and supports, one inch and under, work to support the replacement of the Steam Generators.

8. Tests Conducted:

Hydrostatic:E]

Pneumatic[]

Pressure:

N/._A psi.

Nominal Operating Pressure:

Inservice: [:) Leakage: []

Functional: El Test Temperature:

N/_AA Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

2. Plant:

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance Rpropeet on msoh We certify that the statements made in this report are correct and that this Repair/RepIacement conforms to the rules of the ASME Code, Sectioii XI.

"Type Code Symbol Stamp:

N/A Certificate of Authorization No.: N/A Expiration Date:

N/A Charles H. Ballard Signed:

/,

Engineering Technician Date:

8/1/2002 Owner or Owner's Designee, Title I

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Johnston, RI have inspected the components described in this Owner's Report during the period Z-/(-I Z..

to 6-2 0?...

, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions:

Anseersgau AlBar, -

ted os n

lnspe sSintr National Board, State, anid Endorsements Dae J

200 Z

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required Required by the'Provisions of the ASiME Code Section X1

1. Owner:

Calvert Cliffs Nuclear Power Plant,-Inc.

(name) 1650 Calvert Cliffs Parkway;, Lusby, MD. 20657

2. Plant:'

S(address).

Calvert Cliffs Nuclear Power Plant (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Date:

6121/2002 Sheet 1 of 2 Unit: Common R&R No. SNUB-0-002, MWO No. SNUB POOL (address)

(P.O. no,job no., etc.)

3. WorkPerformed by:

Calvert Cliffs Nuclear Power Plant Depti.

Ccie (name)

Authorization No.: N/A I

IExp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class:

1, 2, & 3 (address)

4. Identification of System: - System Number 065B System Name:

Seismic Snubbers 5.(a) Applicable Construction Code and Class:

ASME B31.1.0 1967 Ed, 1972 Add, B31.7 1969 Ed, Sum. 1971 Add. or Combustion Eng. Spec 8067-487-503 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components:

Name of Componet Name of Manufacturer Manufacturers Serial Number National Board No.

Other Identification

.ASME

Repaired, Code Year Replaced, or Stamped Built Replacement (Yes or No)

Grinnell Corporation Grinnell Corporation Snubber Pool 59013-GX SN: 32307 N/A Hydraulic Shock and Sway Suppressor N/A Hydraulic Shock and Sway Suppressor, 2-1/2" Bore by 5" Stroke, Fig. 200 1975 Repaired/Repi aced 1991

- Replacement

7. Description of Work:

This plan was for the continued control of the Snubber Pool and documentation of new components/parts added to the Snubber Pool per Section Xl 1998, IWA-4132, Items Rotated From Stock. This Plan was for all Snubber work from the end of Unit #2, 2001 outage through to the end of Unit #1, 2002 outage.

8. Tests Conducted:

Hydrostatic F1 Pneumaticf' Pressure:

N/A psi.

Nominal Operating Pressure.

Inservice: ]

Leakage: [] Functional" ]

Test Temperature:

N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,

(2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Snubber Pool SSnubber No No t '

Sheet 2 of 2, FORM NIS-2 (Back)

9. Remarks:*

A Section Xl VT-3 Visual Examination of the affected component support was performed prior to the system being returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this' Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp:

N/A Certificate of Authorization No.: NIA Expiration Date:

N/A Signed:

Charles H. Ballard Signed: /.....................

VEngineering Technician Date:

6/21/2(002 Owner oOwnes fesignee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid comrmission issued by the National Board of Boiler and Pressure Vessel InspeIctors and the State of Maryland and employed by Factory Mutual Insurarnce Co'. of Johnston, RI have inspected the components described in this Owner's Report during the period S--Z3-O to 2-1 0

., and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or propetty damage of a loi* of any kind arising from or "connected with this inspection.

~ i

~Commissions:

/d2 89 CT2 s?-6,1

'Z,.

Inspectojs Signature National Board, State, and Endorsements Date:

'ý.20 2002_

L, I

I

ML022630288

Contents

Text

SUBJECT:

Enclosures:

Reference:

Subject:

Dear Mr. Astles:

Attachment:

Navigation menu

ML022630288

Text

SUBJECT:

Enclosures:

Reference:

Subject:

Dear Mr. Astles:

Attachment:

Navigation menu

Search