| | Q | CCA | Title |
|---|
| 05000400/FIN-2010005-06 | 2010Q4 | H.7 | Inadequate Procedural Guidance to Properly Lift/Land Leads |
| 05000400/FIN-2010005-05 | 2010Q4 | H.11
H.12 | Failure to Follow Procedure to Properly Align the MOC Switch Contacts Associated With Breaker 1A-6 Results in Actuation of the B MDAFW Pump |
| 05000400/FIN-2010005-02 | 2010Q4 | H.11
H.12 | Failure to Follow Procedure Results in Emergency Safeguards Sequencer Actuation and Safety Injection Signal (SIS) while the Plant was in Mode 6 |
| 05000400/FIN-2010005-01 | 2010Q4 | H.9
H.2(b) | Failure to Properly Implement Procedural Guidance to Maintain the FHBEES Boundary |
| 05000400/FIN-2010005-04 | 2010Q4 | H.4
H.5 | Inadequate Post Maintenance Test Procedure Results in Deenergization of the B Safety Bus and Loss of Decay Heat Removal |
| 05000400/FIN-2010005-03 | 2010Q4 | H.14 | Failure to comply with the limiting conditions for operation, while the Refueling Water Storage Tank was aligned to the non-seismically qualified Fuel Pool Purification System |
| 05000400/FIN-2011008-09 | 2011Q2 | P.2 | Inadequate Corrective Action Inadvertent Loss of Thermal Barrier HX Flow |
| 05000400/FIN-2011008-10 | 2011Q2 | | Failure to Establish Adequate Preventative Maintenance Procedure for Safety-Related Tornado Dampers |
| 05000400/FIN-2011003-01 | 2011Q2 | | Offsite Power Supply Cables Submerged in Water |
| 05000400/FIN-2011008-01 | 2011Q2 | | Failure to Report Required Information Related to MSIV Failure |
| 05000400/FIN-2011008-08 | 2011Q2 | | Failure to Ensure Adequate Voltage for Safety Related Components |
| 05000400/FIN-2011008-07 | 2011Q2 | | Failure to Test Safety-Related Molded Case Circuit Breakers |
| 05000400/FIN-2011008-06 | 2011Q2 | | Failure to Extend the Design Life for Molded-Case Circuit Breakers |
| 05000400/FIN-2011008-05 | 2011Q2 | | Failure to Control Design Limits for ESCW Flow Balancing |
| 05000400/FIN-2011008-04 | 2011Q2 | | Non-conservative Calculations for Motor Control Center Control Circuit Voltage |
| 05000400/FIN-2011008-03 | 2011Q2 | | Failure to Maintain Environmental Qualification on Steam Generator Power Operated Relief Valves |
| 05000400/FIN-2011008-02 | 2011Q2 | | Inadequate Control of Degraded Voltage Time Delay Settings Two Examples |
| 05000400/FIN-2011003-02 | 2011Q2 | P.5
P.2(b) | Inadequate Procedure for Identifying Accumulated Gas in ECCS Systems |
