Latest revision as of 23:37, 10 January 2025

Text

Addendum to the Beaver Valley Power Station, Unit No. 1, Near-Term Task Force Recommendation 2.3 Seismic Walkdown Report
	ML14028A263
Person / Time
Site:	Beaver Valley
Issue date:	01/27/2014
From:	Emily Larson; FirstEnergy Nuclear Operating Co
To:	; Document Control Desk, Office of Nuclear Reactor Regulation
References
	L-13-376
	Download: ML14028A263 (88)
	v • d • e

{{#Wiki_filter:FENOC' FirstEnergy Nuclear Operating Company Eric A. Larson Site Vice President January 27, 2014 L-13-376 ATTN: Document Control Desk U.S. Nuclear Regulatory Commission 11555 Rockville Pike Rockville, MD 20852

SUBJECT:

Beaver Valley Power Station, Unit No. 1 Docket No. 50-334, License No. DPR-66 Beaver Valley Power Station P.O. Box 4 Shippingport, PA 15077 724-682-5234 Fax: 724-643-8069 10 CFR 50.54(f) Addendum to the Beaver Valley Power Station, Unit No. 1, Near-Term Task Force Recommendation 2.3 Seismic Walkdown Report On March 12, 2012, the Nuclear Regulatory Commission (NRG) issued a letter titled, "Request for Information Pursuant to Title 10 of the Code of Federal Regulations 50.54(f) Regarding Recommendations 2.1, 2.3, and 9.3 of the Near-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident," to all power reactor licensees and holders of construction permits in active or deferred status. Enclosure 3 of the 10 CFR 50.54(f) letter contains specific Requested Actions, Requested Information, and Required Responses associated with Recommendation 2.3 for Seismic Walkdowns. By letter dated November 27, 2012, FirstEnergy Nuclear Operating Company (FENOC) submitted the 180-day response to the 10 CFR 50.54(f) letter. The required seismic walkdown reports were provided for Beaver Valley Power Station, Unit No. 1; Beaver Valley Power Station, Unit No. 2; Davis-Besse Nuclear Power Station; and Perry Nuclear Power Plant. During the seismic walkdowns, certain plant areas were inaccessible due to conditions expected during normal power operation. FENOC committed to submit a supplemental report documenting the results of the additional seismic walkdowns performed during a specified refueling outage. As committed for Beaver Valley Power Station, Unit No. 1, the additional seismic walkdowns were completed during the fall 2013 refueling outage. FENOC hereby submits the enclosed addendum to the Beaver Valley Power Station, Unit No. 1, Near-Term Task Force Recommendation 2.3 Seismic Walkdown Report.

Beaver Valley Power Station, Unit No. 1 L-13-376 Page 2 There are no regulatory commitments contained in this letter. If there are any questions or if additional information is required, please contact Mr. Thomas A. Lentz, Manager-Fleet Licensing, at 330-315-6810. I declare under penalty of perjury that the foregoing is true and correct. Executed on January ;;>+, 2014. Sincerely, t: Ci;/~ Eric A. Larson

Enclosure:

Addendum to Beaver Valley Power Station Unit 1 Near-Term Task Force Recommendation 2.3 Seismic Walkdown Report, Revision 1 cc: Director, Office of Nuclear Reactor Regulation (NRR) (w/o Enclosure) NRC Region I Administrator (w/o Enclosure) NRC Resident Inspector (w/o Enclosure) NRR Project Manager (w/o Enclosure) Director BRP/DEP (w/o Enclosure) Site BRP/DEP Representative (w/o Enclosure)

Addendum to Beaver Valley Power $tation Unit 1 Near-Terun Task Force Hec$mffiendation 2'3 Seismic Walkdown Repsrto Rev 1 Dated $eptember 4,201 3 November 1, 2013 Prepared by: Reviewed by: Approved by: FirstEnergy Nuclear Operating Gompany (FHNOC)

Purpose:

In response to the NRC Letter 50.54(0 Section 2.3, FirstEnergy Nuclear Operating Company (FENOC) submitted its response to the Nuclear Regulatory Commission (NRC) in Novemb er 2012 for its Beaver Valley Power Station (BVPS) Unit 1. Additionally, the Revision 0 repofi was revised in September2Ol3 based on the feedback received from NRC audit at BVPS conducted in July 2013. Pages 248 & 291 of the submittal report Table 6-3 identified 13 components that were not accessible during the time initial walkdowns were performed while the plant was in operation. A commitment was added in the report stating that these 13 items will be walked down during the next refueling outage. The purpose of this addendum to the report is to document the findings of those 13 components that were walked down during the September/October 2013 (IR22) refueling outage. Attachments: Revised page 284, Section 6.1 to identify the 13 inaccessible components that were walked down during the September/October 2013 refueling outage and also to indicate three additional components that were walked down. Also adds reference to additional Table 6-5 mentioned in item 3 below. Revised page 291 and292Table 6-3 and TabIe6-4 to include the additional 3 components walked down during the September/October 2013 refueling outage. Added page 292A to include an additional Table 6-5 to identify areas walked by inside the Containment Building during the September/October 2013 refueling outage. Seismic Walkdown Checklists for l3 components that were identified as inaccessible in the original submittal report and also for 3 additional components walked down. Area Walk-By Checklists associated with the components stated in item 4 above. Findings: No potentially adverse findings were identified for these components and in the associated rooms. The findings are documented in the attached Seismic Walkdown Checklists (SWC) and the associated Area Walk-By Checklists (AWC). 1. 2. 3. 4. 5.

6-5 and Table 6-6. The tables document "potential" issues that would be adverse to quality. In general, they are a documentation of varying degrees of experience and use of engineering judgments. The basis for excluding an issue from being a condition report is documented in the walkdown checklist to ensure retrievability. 6.0

SUMMARY

OF THE WALKDOWN RESULTS Wam DowN Irnus AND Wllr-Bv Anpa,s 6.1 The SWEL 1 included a total of I 13 components, and SWEL 2 included a total of 8 components. From this totalof 12I components, 108 components were walked down and 13 components were inaccessible and will require walkdown during the next plant's refueling outage. Notification No. 600788346 was generated to have these walkdowns performed during the next refueling outage. (These 13 components were walked down during the September/October 2013 refueling outage as indicated in the footnote to Table 6-3 on page 291.) Three additional components (PCV-IIA-117, PT-IRC-402, and MOV-1CH-310) were walked down during the September/October 2013 Refueling Outage as they were located in the same vicinity of the area of scheduled walk downs. Table 6-1 and Table 6-2 rdentify the walkdown items and walk-by areas, respectively, and Table 6-3 presents a list of items on the SWEL which are inaccessible while the plant is in operation. Three motor operated valves MOV-1QS-1018, MOV-15I-8608, and MOVE-15I-862A were part of the SEL components to be walked down. As noted on their respective checklists, the valves themselves were inaccessible, but the operators were accessible. The operators were walked down, but the in line valves were not. The areas walk-by and the walkdown items are cross correlated on the respective SWCs and AWCs. TabLe 6-4 provides the list of equipment that was walked down, by EPRI equipment class. Table 6-5 identifies the walk-by areas in the Containment Building which are inaccessible while the plant is in operation. Table 6-1: Beaver Valley 1 NTTF 2.3 Walkdown Items (SWEL I+2) Equipment ID No Equip. Class BIdg Floor EI Area Description ICC-E-1A

21. Tanks and Heat Exchangers AXLB 735 Primary Aux. Blde 735'6" IEE-EG-1

17. Eneine Generators DGBX 735 DG Room Train A IEE-EG-2

17. Eneine Generators DGBX 735 DG Room Train B IFC-E-1A

21. Tanks and Heat Exchansers FULB 735 Fuel Buildine Rev 1 pg:284 l

Table 6-2: Beaver Vallev 1 NTTF 2.3 Walk-Bv Areas* Area Bldq Floor El Prim. Aux. Bldg. 735'6 AXLB 735 QS-AFW Pump Room SFGB 735 Relay Room AXLB 713 Service Building Floor 725' SRVB 725 Valve Pit 688' SFGB 747 West Cable Vault - SE Corner SFGB 735

Does not include areas in Containment Building. (For areas in Containment Building see Table 6-5 on pg292l\\)

Note: Equipment located in either SFG or MSCV are all designated to be in SFGB. Table 6-3: Beaver Valley I NTTF 2.3Inaccessible Items on SWELI+Z* Equip. ID Description Blde BI Area Description GN-TK-18 NITROGEN ACCUMULATOR TANK GN-TK-IB RCBX 767 REACTOR CONTAINMENT BUILDING LT-1FW-475 SG1A BIP NARROW RANGE LEVEL TRANSMITTER LT-I FW-415 RCBX 718 OUTSIDE 1A STEAM GEN CUBICLE MOV-1RC-535PORV BLOCK VALVE MOV-RC-535 RCBX 767 PRESSURIZER CUBICLE PCV-IRC-455D PZR PORV PCV-RC-455D RCBX 767 PRESSURIZER CUBICLE PCV-CC-101 CNMT AIR COMPR CHILLED WATER SUP PRESS CONT RCBX 718 REACTOR CONTAINMENT BUILDING PT-I RC-403 REACTOR COOLANT WIDE RANGE PRESSURE, PT-RC-403 RCBX 692 701 KEYWAY WALL RH-P-1A RHR PUMP RH-P-IA RCBX 707 RHR PLATFORM RS-E-1D RECIRC SPRAY HEAT EXCHANGER RS-E-ID RCBX 718 RECIRC SPRAY CLRS RS-P-1A INSIDE RECIR. PUMP RS-P-IA RCBX 692 AT CNMT SUMP SI-24 LOOP 2 COLD LEG SI SUP CHECK VALVE ST-24 RCBX 718 AT 18 LOOP CUB SOV-1RC-103B SOV-RC-103B RCBX 767 ON PZR CUBICLE OUTSIDE WALL TV-1CC-107 A RCP 1A THERM BARR CCR OUT ISOL.TV-CC-107A RCBX 718 -A RCP PP CUBICLE-TI-1CC-131C CNMT RECIRC AIR COOLERS INLET LOOP #3 RCBX 692 REACTOR CONTAINMENT BUILDING (690) Rev 1 pg:29l

Table 6-3: Beaver Valley I NTTF 2.3 Inaccessible Items on SWELI+2* Equip. ID Description Blde EI Area Description PCV-1IA-II7 PRESS CONTROL VALVE RCBX 767 RCBX 767 OUTSIDE CRANE WALL PT-IRC-402 REACTOR COOLANT WIDE RANGE PRESURE RCBX 718 RCBX 718 OUTSIDE CRANE WALL MOV-ICH-310 REGEN HX CHG HDR OUT ISOL. NORMAL CHARGIN VALVE RCBX 692 BASEMENT

These components were walked down during the September/October 2013 refueling outage.

Table 6-4: Beaver Valley I NTTF 2.3 Components Categorizedby EPRI Classes EPRI Cat No. Equipment Description Components Walked Down 0 Other 7 I Motor Control Centers and Wall-Mounted Contactors 7 2 Low Voltage Switcheear and Breaker Panels 3 3 Medium Voltage, Metal-Clad Switchgear 2 4 Transformers 4 5 Horizontal Pumps 10 6 Vertical Pumps 4 7 Pneumatic-Operated Valves 15 8 Motor-Operated and Solenoid-Operated Valves I7 9 Fans 2 10 Air Handlers I ll Chillers 0 L2 Air Compressors 0 13 Motor Generators 0 I4 Distribution Panels and Automatic Transfer Switches 6 l5 Battery Racks 2 I6 Battery Chargers and Inverters 6 L7 Engine Generators 2 18 Instrument (on) Racks 8 r9 Temperature Sensors 2 20 Instrumentation and Control Panels t7 2l Tanks and Heat Exchangers 9 Rev 1 pg:292

Table 6-5: Beaver Valley I NTTF 2.3 Walk-By Containment Building. Areasin the Area Blde Floor El Basement RCBX 692 Pressurizer Cubicle RCBX 767 PRT Cubicle RCBX 718 RCBX 767 Ottside Crane Wall RCBX 767 RCBX 718 Outside Crane Wall RCBX 718 RCBX "A" Cubicle RCBX 718 RCBX "B" Cubicle RCBX tr8 RHR Platform RCBX 707 Rev 1 pg:2924

Sheet I of56 Paul C. Riuzo Assrrciatcs. Inr:. [:..(,lfifLlti tr Ll,]N!l jI 1\\\\1\\ Seismic Walkdown Checklist (SWC) Equipment ID No. GN-TK-IB Equip. Class 21. Tanks and Heat Exchangers Equipment Description NITROGEN ACCUMULATOR TANK GN-TK.IB Location: Bldg. RCBX Floor El. 767 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one of the 50o/o of SWEL items requiring such verification)?

GN-TK-L8 consists of a -4ft tall, -18 inch diameter tank mounted to an adjacentwall via a horizontal tube section. This tube section is directly welded to a steel plate which is anchored to the wall via 4-1" diameter anchors.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Tank and anchoragefound in good condition.

4. Is the anchorase free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50o/o for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

X X X X X X

Sheet 2 of56 Patrl C. Rizzo Assor:iatcs, Irr{:. ls(;lNt t_ltt.rr { rl}i\\t :t1.\\\\1.\\ Seismic Walkdown Checklist (SWC) Equipment ID No. GN-TK-IB Equip. Class 21. Tanks and Heat Exchangers Equipment Description NITROGEN ACCUMULATOR TANK GN-TK.IB Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? N/A N/A

8. Are overhead equipment, distribution and masonry block walls not likely to

systems, ceiling tiles and lighting, collapse onto the equipment?

N/A

9. Do attached lines have adequate flexibility to avoid damage?

Attached piping identified with adequate flexibility.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

X X X X Other Adverse Conditions I l. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: t0n0t20t3

-ffi,//&&

Date: Eddie M. Guerra etfu Brian A. Lucarelli r0lr0l20t3 X

Sheet 3 of56 Paul C. Rizso Associates, Inc. Seismic Walkdown Checklist (SWC) Equipment ID No. gN{K-lB Status: Equip. Class 21. Tanks and Heat Exchangers U N Equipment Description NITROGEN ACCUMULATOR TANK GN-TK-IB File Name: l-67-934jpg

== Description:== Component ID Tag Other supporting or relevant documents and photos (if*?ny): File Name: l-68-934jpg

== Description:== General View of Component

Sheet 4 of56 Paul C. Rizzo Associatcsr lrrc. EIi(;INEERS {i C{}NST !LTAIfI5 Seismic Walkdown Checklist (SWC) Equipment ID No. GN-TK-IB Status: Equip. Class 21. Tanks and Heat Exchangers Equipment Description NITROGEN ACCUMULATOR TANK GN-TK-IB File Name: l-69-935 jpg

== Description:== View of Component Anchorage

pc-tt? Paul c. Rizz. Associ*rcs, Inc-l:,\\(.lt(Lt_Rs \\ { LIN\\ltLr,\\\\t} Seismic Walkdown Checklist (SWC) Equipment ID No. LT-IFW-475 Equipment Description SGIA BIP NARROW RANGE LEVEL TRANSMITTER LT-IFW-475 Location: Bldg. RCBX Floor El. 718 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Sheet 5 of56 Status: N U Equip. Class l8. Instrument (on) Racks Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?

This is a lighnueigfu e5 b), wall-mounted transmitter. The wall mounting consists of a steel plate welded to a steel tube which is attached to the wall via I -3/8" diameter anchor bolts.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Y N X Y N U N/A Y N U N / A X Y N U N i A X Y N U N / A X Y N U X X

ry Paul c. Riu. Associatcs, I'r:. h*(;lN[E_R5 s ( (']N]1,rt-LrNl 5 Seismic Walkdown Checklist (SWC) Equipment ID No. LT-lFW-475 Equipment Description SGIA BIP NARROW RANGE LEVEL TRANSMITTER LT-IFW-475 Sheet 6 of56 Status: Equip. Class 18. Instrument (on) Racks Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

A nached I ines identffie d w ith adequate fl exibility.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

X X X X Other Adverse Conditions I l. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: ffi/,w Eddie M. Guerra tuful Brian A. Lucarelli r0lt0l2013 r0/10/2013 X

Sheet 7 of 56 Patrl C. Rizeo Assoc:iatc.s, Inr:. []"{;lNttltl il ( t}N!1rLfASl! Seismic Walkdown Checklist (SWC) Equipment ID No. LT-lFW-475 Status: Equip. Class 18. Instrument (on) Racks Equipment Description SGIA BIP NARROW RANGE LEVEL TRANSMITTER LT-IFW-475 File Name: l-68-885 jpg

== Description:== General View of Component Other supporting or relevant documents and photos (if File Name: l-67-885 jpg

== Description:== Component ID Tag I 88s jpe

Sheet 8 of56 Paul C. Riz.zo Asscrciatcs, Inc. tNGtNET.RS &, {:0N5t rt-TAs-I5 Seismic Walkdown Checklist (SWC) Equipment ID No. LT-lFW-475 Status: Equip. Class 18. Instrument (on) Racks U N Equipment Description SGIA BIP NARROW RANGE LEVEL TRANSMITTER LT-IFW-475 File Name: l-69-885jpe

== Description:== View of Component Mounting Configuration

pc\\? Paul c. Ilizro Ass*ciares, ['r:. l N(;lNf I Rt s L r,lNll.j t_ IAr'I-\\ Seismic Walkdown Checklist (SWC) Equipment ID No. MOV-lRC-535 Equip. Class 8a. Motor-Operated Valves Equipment Description PORV BLOCK VALVE MOV.RC-535 Location: Bldg. RCBX Floor El. 767 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50o/o of SWEL items requiring such verification)?

This MOV is in line with a very well-supported insulated pipe. P&lD RM-00378 indicates pipe diameter is 3". Yoke was observed to be sfficiently strong to prevent shaft binding.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Valvefound in good condition.

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50oh for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Sheet 9 of56 X X X X X X

f" Parrl c-. Rizz. Ass.t:iarcs, [nc. ISr;f Xrf.fr'l u (l:'i>fT'l rlfr Seismic Walkdown Checklist (SWC) Equipment ID No. MOV-1RC-535 Equipment Description PORV BLOCK VALVE MOV-RC-535 Sheet l0 of56 Equip. Class 8a. Motor-Operated Valves Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

Attached lines identified with adequate flexibility.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

X X X X Other Adverse Conditions

11. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment?

Comments (Additional pages may be added as necessary) Evaluated bv: Eddie M. Guerra t0tr0t20r3 er# Brian A. Lucarelli t0lt0l20l3 X

Patrl C. Rirzo Assor:iatcs, Inr:. [\\..(;lN[tRS.\\ r r)){!tII IA}-Ii Sheet I I of56 Seismic Walkdown Checklist (SWC) Equipment ID No. MOV-lRC-535 Status: Equip. Class 8a. Motor-Operated Valves Equipment Description PORV BLOCK VALVE MOV-RC-535 Other supporting or relevant documents and File Name: l-68-963 jpg

== Description:== Component ID Tag t-67 -e63 jpe File Name: l-67-963jpg

== Description:== General View of Component

Sheet 12 of56 Paul C. Rizzo Assot:iatr:s, Irrc" t l'-(;lNuf.tts s Lilfilt rl 1..r.\\Is Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-lRC-455D Equip. Class 7. Pneumatic-Operated Valves Equipment Description Location: Bldg. RCBX PZR PORV PCV-RC-455D Floor El. 767 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50%o of SWEL items requiring such verification)?

This valve has a 3 ft toll actuator and is in line with a 3" pipe. l/ertical and lateral supports are provided near the valve body.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Valve found in good condition.

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50%ofor which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

X X X X X X

Paul C. Rizzo Assor:iatcs, Inc. I s(;tf(t:F.Rs -! r il\\it rt I^\\1\\ Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-lRC-455D Status:

7. Pneumatic-Operated Valves N

Equip. Class Equipment Description PZR PORV PCV-RC-455D Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? L Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

Attached lines identified with adequate flexibility.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

U N Y U N U N U N Y X X X X Other Adverse Conditions I 1. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment? U N Comments (Additional pages may be added as necessary) Evaluated bv: Eddie M. Guerra r0n0t20t3 6*/fu Brian A. Lucarelli Date: Date: r0n0t20t3 X

Sheet 14 of56 Paul C. Rizzo Assor:iatr:s, Inc:. tli(;lN[ F.Rs s ( {}Nst :l.L\\N-I'5 Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-lRC-455D Equipment Description PZR PORV PCV-RC-455D Status: Equip. Class 7. Pneumatic-Operated Valves U N File Name: l-67-943jpg

== Description:== General View of Component Other supporting or relevaqt documents and

pC-? Paul-c. Ri;r* Ass'ciarcs, Irrr:. tN(:lN[ f.li: tr i.t]lisl :l-tt\\*l t Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-CC-101 Sheet 15 of56 Equipment Description Equip. Class 7. Pneumatic-Operated Valves CNMT AIR COMPR CHILLED WATER SUP PRESS CONT Location: Bldg. RCBX Floor El. 718 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50o/o of SWEL items requiring such verification)?

This valve is covered in insulation. The pipe supporting PCV-CC-l0l is laterally supported to an adjacent frame which is mounted to a grating platform at elevation 7 18.

2. Is the anchorage free of bent, broken, missing or loose hardware?

Y N/A N/A

3. Is the anchorage free of corrosion that oxidation?

is more than mild surface

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50o/o for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

X X X X X X

pc-e Patrl C. Rirz* Ass.r:iatcs, Inei [\\t;lfil t_RS s { r!fi!l.:t,I.\\\\] } Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-CC-101 Equipment Description CNMT AIR COMPR CHILLED WATER SUP PRESS CONT Sheet Status: Equip. Class 7. Pneumatic-Operated Valves Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

Y X Y X Y X Y X Other Adverse Conditions I 1 Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guerua 1012512013 fu{fu Brian A. Lucarelli Date: Date: r0l2sl2013 Y X

W Paul c. Riez* Assrrr:iatcs, Inr:. t ti(;tNlr.R5 L, ( rlNlt :l-T,\\Ilt Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-CC-l0l Equipment Description CNMT AIR COMPR CHILLED WATER SUP PRESS CONT Other supporting or relevant documents and photos (if any): Sheet l7 of 56 Status: Equip. Class 7. Pneumatic-Operated Valves File Name:

== Description:== I 00_04s0jpe General View of Component File Name:

== Description:== I 00_0454jpe General View of Component Area

PCef".,r c.nl"r" n"".' IN{il:\\i[L_[tS & ['f]l\\]i.:t.l\\51 i Seismic Walkdown Checklist (SWC) Equipment ID No. PT-lRC-403 Sheet l8 of56 Status: Equip. Class 18. Instrument (on) Racks Equipment Description REACTOR COOLANT WIDE RANGE PRESSURE. PT-RC-403 Location: Bldg. RCBX Floor El. 692 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50Vo of SWEL items requiring such verification)?

This is a lighnueight C5 lb), wall-mounted pressure transmitter. The wall mounting consists of a steel plate welded to a steel tube which is attqched to the wall via 4 -3/8" diameter anchor bolts.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50Yofor which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Y Y Y Y N/A Y X X X X X X

Sheet 19 of56 Paul C. Rizro Assot:iatc,r, fnr:. [ \\{.;tN[LR5 tr ({}lr!LiLL{S I i Seismic Walkdown Checklist (SWC) Equipment ID No. PT-1RC-403 Equipment Description Equip. Class 18. Instrument (on) Racks REACTOR COOLANT WIDE RANGE PRESSURE, PT.RC-403 Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? N o interaction c oncerns identified.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

A ttac hed I ines identified w ith adequate fl exibil ity.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A X X X X Other Adverse Conditions I 1. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated bv: Eddie M. Guerra G*J# Brian A. Lucarelli 10125120t3 r0t25t20t3 X

Patrl C. ltizzu Associar(:$, [nq:. t N(ilNt:t lt5 {r l,'t!}iSt ;t l,\\}1\\ Sheet 20 of 56 U Status: Equip. Class 18. Instrument (on) Racks N Seismic Walkdown Checklist (SWC) Equipment ID No. PT-I RC-403 Equipment Description REACTOR COOLANT WIDE RANGE PRESSURE, PT-RC-403 Other supporting or relevant documents and photos (if any): File Name: 100_0423jpg

== Description:== General View of Component File Name: 100_0425jpg

== Description:== View of Anchorage

Sheet 2l of 56 Paul C. Rizzo Associatcsr Inc. Seismic Walkdown Checklist (SWC) Status: Equip. Class I E. Instrument (on) Racks Equipment ID No. PT-IRC-403 Equipment Description REACTOR COOLANT WIDE RANGE PRESSLJRE, PT-RC-403 File Name: 100_0426.1pg

== Description:== General View of Component Area N

pcle-Paul C. Risz. Ass.ciittcs, ['r:. [:a(;ll\\ilIltts s i c]N\\l :t_I.rl-t.s Seismic Walkdown Checklist (SWC) Equipment ID No. RH-P-IA Equipment Description Location: Bldg. RCBX Sheet 22 of 56 Equip. Class 6. Vertical Pumps RHR PUMP RH-P.IA Ffoor El. 707 Manufacturer. Model. Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one of the 50o/o of SWEL items requiring such verification)?

The motorfor this vertical pump extends around 7 ftfrom the pipe center line. The pipe in line with the pump is directly bolted to adjacent wide flanges located near the pump.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Anchorage for the pump to the supporting pipe was identified in good condition

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50o/o for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

X X X X X X

pC? Paul C. Rizzo Ass.r:iatcs, Itrr:. I N(.lfit f.H! ar I tfNll l.f.{.\\.. l ! Seismic Walkdown Checklist (SWC) Equipment tD No. RH-P-IA Equipment Description RHR PUMP RH.P-IA Sheet 23 of56 Equip. Class 6. Vertical Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? No interaction concerns identffied in the vicinity of this pump.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

Pumps N/A r0/r0/2013 t0lt0l20r3 X X X X Other Adverse Conditions I l. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guerra fu{ful Brian A. Lucarelli X

Sheet 24 of 56 Paul C. Riszo Associatcs, Inc. rlic lNEr.Rs & clfNst rtT.4"lrTs Status: Seismic Walkdown Checklist (SWC) Equipment ID No. RH-P-lA Equip. Class 6. Vertical Pumps Equipment Description RHR PUMP RH-P-IA Other supporting or relevant documents and File Name: I 881 jpg

== Description:== Component ID Plate File Name: I 881 jpg

== Description:== General View of Pump Motor

Sheet 25 of 56 Seismic Walkdown Checklist (SWC) Equipment ID No. RH-P-lA Equip. Class 6. Vertical Pumps Equipment Description RHR PUMP RH-P-IA File Name: I 881 jpg

== Description:== General View of Base Connection File Name: I 881jpg

== Description:== View of Component Anchorage

PC)" Il.,l C. Riiz'Associatc-s, Inc. t,\\i;llitr.R! {r Lr,}N!I.,:LL{rTS Seismic Walkdown Checklist (SWC) Equipment ID No. RS-E-lD Equip. Class 21. Tanks and Heat Exchangers Equipment Description RECIRC SPRAY HEAT EXCHANGER RS-E-ID Location: Bldg. RCBX Floor El. 718 Manufacturer. Model. Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?

This vertical heat exchanger is around 30ft tall and runs through Elevations 692 and 7 I8. It is supported at El. 692 by a rigid steel tube frame. At El. 7 I 8, it is supported by four stffined legs anchored via 2-I " diameter bolts to the floor.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Mild surface corrosion identified at the bottom plate of the heat exchanger. judged not to be a seismic/structural concern.

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Sheet 26 of 56 X X N/A N/A N/A X X x X

PC? Paul C. Riat* Associatcs, Inc:. t:..t,tXffffi Seismic Walkdown Checklist (SWC) Equipment ID No. RS-E-ID Equip. Class 21. Tanks and Heat Exchangers Equipment Description RECIRC SPRAY HEAT EXCHANGER RS-E-ID Sheet 27 of56 Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?

!;Z:#

scaffolding at El. 692 is well braced andiudged not to present an interaction

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

X X X X Other Adverse Conditions I L Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guena 6*{fu Brian A. Lucarelli t0tr0t20t3 t0n0t2013 X

Sheet 28 of 56 Patrl C. Riczo Associatcs, Inc. E l*C I NFt RS dr CONSU I-T.{NTS Seismic Walkdown Checklist (SWC) Equipment ID No. RS-E-lD Equipment Description Status: Equip. Class 21. Tanks and Heat Exchangers RECIRC SPRAY HEAT EXCHANGER RS-E-ID Other supporting or relevant documents and photos (if an File Name: l-67-891 jpg

== Description:== General View of Component from Elevation6g2 File Name:

== Description:== (Picture is for RS-E-lC which has identical support condition as RS-E-ID) I 8e0 jpe View of Support at El. 692

Paul C. RiEro Assoc:iatcs, Irrt:. tsr;lNttRt e ( f t N t t i L T A t i l s Seismic Walkdown Checklist (SWC) Status: Equip. Class 2l. Tanks and Heat Exchangers N Sheet 29 of 56 U Equipment ID No. RS-E-lD Equipment Description RECIRC SPRAY HEAT EXCHANGER RS-E-ID File Name: I 890 jpg

== Description:== General View of Component from Elevation 718 (Picture is for RS-E-I C which has identical support condition as RS-E-r D) File Name: l-72-890jpg

== Description:== View of Anchorage at El. 718 (Picture is for RS-E-I C which has identical support condition as RS-E-I D)

Sheet 30 of 56 Paul C, Rizzo Associatcs. Inc. lN{iltift Rt ti ( rlNtt

1 T.{\\-t t Seismic Walkdown Checklist(swc)

Equipment ID No. RS-P-lA Equip. Class 6. Vertical Pumps Equipment Description INSIDE RECIR. PUMP RS-P-IA Location: Bldg. RCBX Manufacturer, Model, Etc. Floor El. 692 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is of the 50%o of SWEL items requiring such verification)?

This vertical pump is bolted to skidwith 4 - I"diameter bolts. the motor to the pipe center line is about 10ft. the item one The distance from top of

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50oh for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

N/A X X X X X X

Sheet 3l of56 Patrl C. Riaztr Associarcs, Irrc. [ ]-{iINtf,Rt

s. r{l:\\51

l_I-/\\fij l Seismic Walkdown Checklist (SWC)

Equipment ID No. RS-P-lA Equip. Class 6. Vertical Pumps Equipment Description INSIDE RECIR. PUMP RS-P-IA X Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? Pump motor is in close proximity to steelframe (-2" gap) This is judged not to be a seismic concern since relative motor displacement at this level of the structure will be minimal under seismic action.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A X X X Other Adverse Conditions

11. Have you looked for and adverselv affect the safetv found no other seismic conditions that could functions of the equipment?

Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guerra r0lr0l20r3 6*/fu t0lr0l2013 X Brian A. Lucarelli

Sheet 32 of 56 Paul C. Rizzo Associatcsr Inc. ENG I NEERS & CONSU LTAFTTS Status: Seismic Walkdown Checklist (SWC) Equipment ID No. RS-P-lA Equip. Class 6. Vertical Pumps Equipment Description INSIDE RECIR. PUMP RS-P-IA File Name: l-67 -864.5pg

== Description:== General View of Component File Name: l-69-865 jpe

== Description:== View of Anchorage (Picture is for RS-P-I B which has identical support condition as RS-P-I A) Other supporting or relevant documents and

Sheet 33 of 56 Patrl C. Riezo Associatcs, Inc. E NG I NEE RS {i ('{.)NSLI LTJIIfT,T Seismic Walkdown Checklist (SWC) Equipment ID No. RS-P-lA Equipment Description Status: U N Equip. Class 6. Vertical Pumps INSIDE RECIR. PUMP RS-P-IA File Name: l-7l-865 jpg

== Description:== View of Steel Frame in Vicinity of Pump Motor (Picture is for RS-P-I B which has same configuration as RS-P-r A)

pc-\\e Patrl c. Rizz* A.ss.ciatcs, [*r:. t r..(;lNtLRS.! l (!:{!l.rI_IA}AS Seismic Walkdown Checklist (SWC) Equipment ID No. Sl-24 Equip. Class 0d. Other Check or Manual Valve Equipment Description LOOP 2 COLD LEG SI SUP CHECK VALVE SI-24 Location: Bldg. RCBX Ffoor El. 718 Manufacturer, Model, Etc. lnstructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage l Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)? This valve is covered in insulation and is in-line with an -8" pipe. The segment of the pipe running through elevation 738 is laterally supported about 6ftfrom the valve's location.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Sheet 34 of 56 X X X X N/A X X

pc\\te Paul cl. Rizz. Associarss, Inc:. [\\(; tt\\it F_tts $. ( rtNs1.,L'Ii1II.i Seismic Walkdown Checklist (SWC) Equipment ID No. Sl-24 Equip. Class 0d. Other Check or Manual Valve Equipment Description LOOP 2 COLD LEG SI SUP CHECK VALVE SI-24 Sheet 35 of56 Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A N/A N/A X X X X Other Adverse Conditions I l. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated bv: t0lzsl2013 1012s12013 X Eddie M. Guerra Brian A. Lucarelli

Sheet 36 of 56 Paul C. Rizao Associatcsr Inc. Seismic Walkdown Checklist (SWC) Equipment ID No. Sl-24 Status: Equip. Class 0d. Other Check or Manual Valve File Name: 100_0463 jpe

== Description:== General View of Component (Below Grating) Equipment Description LOOP 2 COLD LEG SI SUP CHECK VALVE SI-24 File Name:

== Description:== I SI 24 Uninsulatedjpg General View of Component (Picture from Valve Team Documentation Provided by Plant Personnel) Other supporting or relevant documents and

pc-tte Paul c. Rizz. Assor:iatcs, Ir*:. t N{:tfilt_tis e, coN$.rLr.{NTs Seismic Walkdown Checklist (SWC) Equipment ID No. SOV-lRC-1038 Equip. Class 88. Solenoid Valves Equipment Description SOV.RC.I03B Location: Bldg. RCBX Floor El. 767 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?

This SOV is approximately I ft tall and is in line with a well supported l " diameter pipe Piping is supported to the wall about 2 ftfrom the valve in one direction and about 5 ft from the valve in the other direction by double-angle supports.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Valvefound in good condition.

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Sheet 37 of 56 X X X X X X

Sheet 38 of56 Paul C. Rizzo Asscrt:iatcs, lnr:. t s{ilfit}.Rt & l L}N!t_r f _r.{\\-I \\ Seismic Walkdown Checklist (SWC) Equipment ID No. SOV-lRC-103B Equipment Description SOV-RC-I03B Equip. Class 88. Solenoid Valves X Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? Gap between solenoid operator andwall is approximately 2 inches. The lateral restraint provided by the pipe supports is judged to be sfficient to prevent impact between operator and w all.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

Attached lines identified with adequate flexibility.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A N/A NiA X X X Other Adverse Conditions I l. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guerra r0n0t2013 6*/fu X Brian A. Lucarelli t0/r012013

Sheet 39 of 5b Paul C. Rizzo Associatcs, Int:. E.r..( ; I Ntf. RS $, uilNsl

t_l,rrNt t Status:

Equipment Description Seismic Walkdown Checklist (SWC) Equipment ID No. SOV-lRC-103B Equip. Class 8B. Solenoid Valves SOV-RC-I 03B Other supporting or relevant documents File Name: l-67-966jpg

== Description:== General View of Component Area File Name: l 966.5pe

== Description:== View of Component and ID Tag l e66 j pe

Sheet 40 of 56 Paul C. Rizzo Asrociatcs, Int:. Eli{ilNtt-Rs s r'oN51,:Lr.{sI.i Seismic Walkdown Checklist (SWC) Equipment ID No. TV-lCC-107A Equip. Class 7. Pneumatic-Operated Valves Equipment Description RCP IA THERM BARR CCR OUT ISOL.TV.CC-IO7A Location: Bldg. RCBX Floor El. 718 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage L Is the anchorage configuration verification required (i.e., is the item one of the 50o/o of SWEL items requiring such verification)? This AOV is about 4ft tall and is in line with a well supported -2" diameter pipe. It is also laterally supportedfrom adjacent wall.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3.ls the anchorage free of corrosion that is more than mild surface oxidation? Valvefound in good condition.

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

N/A X X X X X X

Sheet 4l of 56 Paul C. Riezo Assot:iatcs. f nc. [],1(;ll.ilf tis r\\ t'1--]N!1.,1.L1$t ! Seismic Walkdown Checklist (SWC) Equipment ID No. TV-I CC-107 A Equip. Class 7. Pneumatic-Operated Valves Equipment Description RCP IA THERM BARR CCR OUT ISOL.TV-CC.IO7A Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures?

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

A t t ac he d I i ne s i de nt ffi e d w it h adeq uate Jl exi b i I ily.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

X X X X Other Adverse Conditions I l. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by:

-ffi,twpL Eddie M. Guerra 6*/M Brian A. Lucarelli Date:

Date: t0lt0l20l3 rclr0l20r3 X

ryPaul

c. Rizzo Associatcs, Inc.

ENGINEERS & C1)NSUITAIfT$ Seismic Walkdown Checklist (SWC) Equipment ID No. TV-ICC-I07A Equip. Class 7. Pneumatic-Operated Valves Equipment Description RCP 1A THERM BARR CCR OUT ISOL.TV-CC-IO7A other supporting or relevant documents and photos (if any): File Name:

== Description:== File Name:

== Description:== Sheet 42 of 56 r-67-902.tp9 General View of Component l 902.5p9 View of Additional Lateral Support at Valve Base

pC-? &gl-c. Riezo Associatcs, I rrr,. t Ni;lNIr n( a\\ ( (llt\\t I_IAI..]\\ Seismic Walkdown Checklist (SWC) Equipment ID No. TI-lCC-l3lC Equip. Class 19. Temperature sensors Equipment Description CNMT RECIRC AIR COOLERS INLET LOOP #3 Location: Bldg. RCBX Floor El. 692 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

1. Is the anchorage configuration verification required (i.e.,

of the 50%o of SWEL items requiring such verification)? Small instrument mounted on insulated pipe - 8" diameter. supported. Sheet 43 of56 is the item one Pipe is observed to be well NiA

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50Yofor which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

X X X X X X

PC-? Paul C, Rizztt Ass'r:iatcs, ltrt:. E\\t;llr;[ER! ar I r ]N!1.: I-Lrr}fI.i Seismic Walkdown Checklist (SWC) Equipment ID No. TI-1CC-l3lC Equip. Class 19. Temperature sensors Equipment Description CNMT RECIRC AIR COOLERS INLET LOOP #3 Sheet 44 of 56 Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? No potential interaction concerns were identified in the area.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A N/A X X X X Other Adverse Conditions I l. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guerra 6*J# Brian A. Lucarelli t0lr0l2al3 r0lr0l2013 X

Other supporting or relevant documents and photos (if any): R Pattl c' Rizzo Assoc:iatcs, Inc. [li(; I N[:t_ Rs &. {]{}NSt,r I-TA!\\"I 5 Seismic Walkdown Checklist (SWC) Equipment ID No. TI-I CC-l3 I C Equipment Description CNMT RECIRC AIR COOLERS INLET LOOP #3 Sheet 45 of 56 Status: Equip. Class 19. Temperature sensors File Name:

== Description:== I 85ejpe General View of Component

PCte Paul c, Riezo Assor:iarus, Inr:, I \\(.lNIr.Rl.! r rlti5t-l_r.\\\\Is Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-1 IA-I I 7 Equip. Class 7. Pneumatic-Operated Valves Equipment Description PRESS CONTROL VALVE PCV-IA.I 17 Location: Bldg. RCBX Floor El. 767 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?

This is a small valve in line with a I " diameter pipe. Pipe is well supported to the adjacent wall.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Valvefound in good condition.

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50o/o for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Sheet 46 of 56 X X X X X X

Sheet 47 of 56 Paul C. Riezo Assor:iatcs, Irrc. FS(ilr.;tF_tts s foNst.rI.T'{tiI.i Seismic Walkdown Checklist (SWC) Equipment ID No. PCV-IIA-I l7 Equip. Class 7. Pneumatic-Operated Valves Equipment Description PRESS CONTROL VALVE PCV.IA-I 17 Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? Adjacent scaffolding associated with the outage is temporary but well braced and judged not to present an interaction concern.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A X X X X Other Adverse Conditions I l Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guerra 6*,rful Brian A. Lucarelli t0lr0l20t3 r0lr0l20r3 X

Sheet 48 of 56 Status: Equip. Class 7. Pneumatic-Operated Valves U N Seismic Walkdown Equipment ID No. Checklist (SWC) PCV-I IA-II7 Equipment Description PRESS CONTROL VALVE PCV-IA-I I7 Other supporting or relevant documents and photos (if an File Name: l 9a I jpg

== Description:== General View of Component

pC? Paul C. Rizzo Ass'ciatts,-I'c-tN(,tNIr R\\ $. I r.!lt\\1,' l_I.\\\\l'! Seismic Walkdown Checklist (SWC) Equipment ID No. PT.lRC-402 Equip. Class 18. Instrument (on) Racks Equipment Description REACTOR COOLANT WIDE RANGE PRESSURE. PT.RC-402 Location: Bldg. RCBX Floor El. 718 Manufacturer. Model. Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?

This is a lightweight instrument mounted on a steel rack. The rack is top braced to the wall by a steel angle and is bolted to the steel platform below via 4-l/2" diameter bolts.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

Sheet 49 of 56 X X X X N/A X X

pC-? Paul C. Riezo Ass*ciatcs, Inc:. t: s(;ll.,il f lts s L o:isi. Lr,\\\\-I ! Seismic Walkdown Checklist (SWC) Equipment ID No. PT-1RC-402 Equipment Description REACTOR COOLANT WIDE RANGE PRESSURE, PT.RC-402 Sheet 50 of 56 Status: Equip. Class 18. Instrument (on) Racks X Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures? Small plastic container related to outage activities identified adjacent to instrument rack. Potential interaction is judged to be non-damaging, so this is not a seismic/struc tural c oncer n.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

Attached lines identiJied with adequate Jlexibility.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A N/A X X X Other Adverse Conditions 1 1. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment? Comments (Additional pages may be added as necessary) Evaluated bv: Eddie M. Guerra t0/1012013 C*{fu r0tr0t20t3 X Brian A. Lucarelli

Sheet 5l of56 Paul C. Rizzo Associatcs, Inc. E NGIN EELC & (A)NSU TTA IfTf; Seismic Walkdown Checklist (SWC) Equipment ID No. PT-IRC-402 Status: Equip. Class 18. Instrument (on) Racks Equipment Description REACTOR COOLANT WIDE RANGE PRESSURE, PT-RC-402 Other suppgrti

Sheet 52 of 56 Paul C. Riszo Associatcs, Inc. E&*C I NEf llS &. CONSI.! I.TAlrT$ Seismic Walkdown Checklist (SWC) Equipment ID No. PT-IRC-402 Equip. Class 18. Instrument (on) Racks Equipment Description REACTOR COOLANT WIDE RANGE PRESSURE, PT-RC.4O2

== Description:== View o

Sheet 53 of 56 Paul C. Rizso Associatcsr Inc. Seismic Walkdown Checklist (SWC) Equipment ID No. PT-lRC-402 Equip. Class 18. Instrument (on) Racks Equipment Description REACTOR COOLANT WIDE RANGE PRESSURE, PT-RC-402 N @ounting Configuration

pc\\e Paul c. Riezo Associatcs, I*r:. [!{;lNfLR5 {* { ilNll.:l.I^}irS Seismic Walkdown Checklist (SWC) Equipment ID No. MOV-I CH-3 l0 Equipment Description Location: Blde. RCBX Sheet 54 of56 Equip. Class Status: 8a. Motor-Operated Valves REGEN HX CHG HDR OUT ISOL, NORMAL CHARGING VALVE MOV.CH.3IO Floor El. 692 Manufacturer, Model, Etc. Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. Anchorage

l. Is the anchorage configuration verification required (i.e., is the item one of the 50o/o of SWEL items requiring such verification)?

The distance from the top of the actuator to the pipe center line is -3 ft This MOV has a Limitorque actuator and is laterally supported to an adjacent wall by a steel brace member.

2. Is the anchorage free of bent, broken, missing or loose hardware?

3. Is the anchorage free of corrosion that is more than mild surface oxidation?

Valvefound in good condition.

4. Is the anchorase free of visible cracks in the concrete near the anchors?

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

N/A X X X X X X

pct? Paul c. Iliez* Associarr.s, I'c. t:\\(;lNtltRl s ( oN\\1.:t-I^lil.s Seismic Walkdown Checklist (SWC) Equipment ID No. MOV-I CH-3 l0 Equipment Description REGEN HX CHG HDR OUT ISOL. NORMAL CHARGING VALVE MOV-CH.3IO Sheet 55 of56 Status: Equip. Class 8a. Motor-Operated Valves Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage?

A ttac he d I ine s i de nt ifi e d w it h adeq uat e fl exi b il i ty.

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

N/A X X X X Other Adverse Conditions

11. Have you looked for and adversely affect the safety found no other seismic conditions that could functions of the equipment?

Comments (Additional pages may be added as necessary) Evaluated by: t0lr0l2013 Date: e*{/ Brian A. Lucarelli r0lt0l2013 X Eddie M. Guerua

Sheet 56 of 56 Seismic Walkdown Checklist (SWC) Equipment ID No. MOV-ICH-310 Equipment Description Equip. Class 8a. Motor-Operated Valves REGEN HX CHG HDROUT ISOL. NORMAL CHARGING VALVE MOV-CH.3IO Other supporting or relevant documents and photos (if any):

== Description:== Gen omponent

pc-.e Sheet 1 of24 Pattl C. Riretr Assoc:iatcs. Irrrr. !\\(:tNl_ Ettt ai ( rllisl.rt_1,\\:r..T* Status: Area Walk-By Checklist (AWC) Room Floor El. BASEMENT 692 RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

l. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

Bldg. Y

2. Does anchorage of equipment in the area appear to be free of significant degraded conditions?

Mild surface corrosion identified at base plate of heat exchangers RS-E-IA, and RS-E-lC and judged to not be a seismic/structural concern.

3. Based on a visual inspection from the floor, do the cable/conduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

RS-E-] B, Y

4. Does it appear that the area is free interactions with other equipment lighting)?

of potentially adverse seismic spatial in the area (e.g., ceiling tiles and Related equipment on SWEL for this area: RS-P-IA TI-ICC-I3IC PT-1RC-403 RS-E-ID MOV-ICH-310 X X X X

Parrl C. Riezo Assor:iatcs, Inc. I st,nt rjtr,i r rrs.LLr..rrL* Bldg. Status: N Area Walk-By Checklist (AWC) Room Floor El. BASEMENT 692 RCBX Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the area?

No concerns identffied regardingfire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.9., scaffolding, lead shielding)?

Scaffolding in the area identified to be well braced. Unrestrained drums observed to be temporarily stored in vicinity of I VS-E-I C for outage activities. Any potential interaction is judged to be non-damaging on adjacent piping, therefore this is not a signfficant interaction.

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated bv: Date: Eddie M. Guerra Date: Brian A. Lucarelli N N Y U N Y N t0/10t20r3 r0/t0/2013 X X X X

Sheet 3 of 24 I N(rlNr].Rt.\\ {t}!{st-rl TAFIT Status: N U Area Walk-By Checklist (AWC) Room Floor El. BASEMENT 692 Bldg. RCBX Other supporting or relevant documents and photos (if any): File Name: l-71-853jpg

== Description:== General View of Area File Name: I 853 jpg

== Description:== Barrels Judged not a Significant Interaction

pc'\\e P*trl c. Riiz. Associatcs, I-'ri t \\r. tNL[.lts s I, r]:t\\L. t_L\\N1r Area Walk-By Checklist (AWC) Room Floor El. PRESSURTZER CUBICLE 767 RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

1. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area degraded conditions?

appear to be free of significant

3. Based on a visual inspection from the floor, do the cableiconduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

4. Does it appear that the area is free of potentially adverse seismic spatial interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

Related equipment on SWEL for this area: MOV-lRC-535 PCV.I RC-455D SOV-IRC-I 03B Bldg. Sheet 4 of24 N/A N/A N/A X X X X

pc\\e Patrl C. Riezo Asscrr:iatcs, I'r:. I \\il lNF r_ R5 at {. LlNSl I LT,{:\\--I-s Area Walk-By Checklist (AWC) PRESSURIZER CUBICLE Sheet 5 of24 Room Floor El. 767 Bldg. RCBX X Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the area?

No concerns identified regardingfire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

Several tools and maintenance equipment associatedwith the outage were identified in the area. These did not present a credible or significqnt interaction concern since they were not close enough to the components in the areq.

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guera t0ll0l2013 t0lt0l2013 Brian A. Lucarelli X X X

Sheet 6 of24 Paut C, Riezo Associatc*r, In(:. Eli(;tNIE RS S, r]0NSl. ;Lr,{!f-I 5 Status: N U Area Walk-By Checklist (AWC) Room Floor El. 767 PRESSURIZER CUBICLE Bldg. RCBX Other supporting or relevant documents and photos (if any): File Name: l-67 -964.5p9

== Description:== General View Inside Cubicle File Name: l 95 4.Spg

== Description:== Temporary Equipment and Platform Not Interaction Concerns

pc\\" Paul c. Rirz* Asxrciatcs, Im:. t \\(,lfltI_tls $, I rllilI.

t. r.\\\\I

\\ Area Walk-By Checklist (AWC) Room Floor El. Sheet 7 of24 N/A PRT CUBICLE RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

l. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

4. Does it appear that the area is free of potentially adverse seismic spatial interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

Related equipment on SWEL for this area: RS.E-1D 7 1 8 Bldg. X X X X

PC" Paut C. Rizz. Associatcs, lnr:. E \\-(, I N[l lts -\\ r. t]N51,: I f,ttr't I Area Walk-By Checklist (AWC) Room Floor El. PRT CUBICLE 7 1 8 Bldg. RCBX Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the ared?

No concerns identified regardingfire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.9., scaffolding, lead shielding)?

Scaffolding in area identified to be well braced. Temporary equipment associated with the outage is staged in a laydown area awayfrom components and does not pose an interaction c oncern.

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated by: Date: Eddie M. Guerra Date: Brian A. Lucarelli 8 of24 tOlt0l20r3 r0tr0t20r3 X X X X

Sheet 9 of 24 Paul C. Rizzo Associatcs, Inc. t Nc I NEt lts {i coNSI.t I.TAtfTs PRT CUBICLE Status: Area Walk-By Checklist (AWC) Room Floor El. 7t8 Bldg. RCBX Other supporting or relevant documents and photos (if any): File Name: l-67-976jpg

== Description:== View of Scaffolding in Area File Name: l-68-976jpg

== Description:== Laydown Area Away from Components r-67 -e76 jpe r-68-e76 jpe

Sheet l0 of24 Paul C. Riezo Associatcs. Inc, [ \\{;l}itElti $, t i}li!1,]l-f.r\\ 1! Area Walk-By Checklist (AWC) Room Floor El. RCBX 767 - OUTSIDE CRANE WALL 767 RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. I. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

4. Does it appear that the area is free of potentially adverse seismic spatial interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

Related equipment on SWEL for this area: GN-TK.IB PCV-ll{-r17 Bldg. X X X X

PC\\4 P..l c. Riezo 4::-r:lgl!,.: t\\(,ttitLRt N { iI{!l l_L\\-\\Ii Area Walk-By Checklist (AWC) Room Floor El. RCBX 767. OUTSIDE CRANE WALL 767 Bldg. RCBX Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the area?

No concerns identified regardingfire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.9., scaffolding, lead shielding)?

Scaffolding in area identffied to be well braced. Various temporary equipment staged in areafor outage activities. No significant potential interactions identtfied, as temporary equipment is generally stored along outside wallwhile components are located along inside wall.

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated by: Date: Eddie M. Guerra Date: Brian A. Lucarelli of 24 Status: N/A r0ll0l20r3 r0lr0l20r3 Y X Y X Y X Y X

Sheet 12 of 24 Paul C. Rizeo Associatcs, Inc. EItiG I NEE TT$ & Cf}NSU TTA'liT$ Status: U N Area Walk-By Checklist (AWC) Room Floor El. 767 RCBX 767 - OUTSIDE CRANE WALL Bldg. RCBX Other supporting or relevant documents and photos (if any): File Name: l-67-978jpg

== Description:== General View of Area File Name: l-68-978ipg

== Description:== View of Temporary Equipment Staged for Outage

pce Paut C. llizt* Associatcs, I,.,c-t\\(; IHf ERS e Lt.}Nlt.j I_IAS-I-i Area Walk-By Checklist (AWC) Room Floor El. Sheet 13 of24 RCBX 7I8 - OUTSIDE CRANE WALL RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

l. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

4. Does it appear that the area is free of potentially adverse seismic spatial interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

Related equipment on SWEL for this area: PCV.CC-IOI LT-1FW-475 PT-IRC-402 718 Bldg. X X X X

pc\\? Paul c. Rizzo Associatcs, I'c. [\\i, tNLtR$ {r r]ONiLr f-rA:;1 t Area Walk-By Checklist (AWC) Room Floor El. Sheet l4 of24 RCBX 718 - OUTSIDE CRANE WALL 718 Bldg. RCBX X Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the area?

No concerns identified regardingfire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

Temporary scaffolding and equipmentfor outage activities were identified in the area. No significant potential interactions identified, as temporary equipment is generally stored along outside wall while components are located along inside wall.

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated bv: Brian A. Lucarelli r0n0t20r3 r0n0l20t3 X X X

Sheet 15 of 24 Paul C. Rizzo Associatcsr Inc. []a(; I NEt RS {5. f ONstJ LT.{tt"I s 7r8 Status: Area Walk-By Checklist (AWC) Room Floor El. RCBX 718 - OUTSIDE CRANE WALL Bldg. RCBX Other supporting or relevant documents and photos (if any): File Name: l-67 -975 jpg

== Description:== General View of Area File Name: l-68-975 jpg

== Description:== General View of Area r-67 -e7s jpe r-68-97s jpe

Sheet 16of24 Area Walk-By Checklist (AWC) Paul C. Riezo Associatr:s, [ut:, lN(;tl{[r.E! $ L i]N\\t' t r,\\\\]-t RCBX 718 - A CUBICLE Status: Room Floor El. 718 Bldg. RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

l. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment degraded conditions?

in the area appear to be free of significant

3. Based on a visual inspection from the floor, do the cable/conduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

4. Does it appear that the area is free interactions with other equipment lighting)?

of potentially adverse seismic spatial in the area (e.g., ceiling tiles and Related equipment on SWEL for this area: TV-ICC-IO7A X X X X

Sheet Area Walk-By Room Floor El. Paul C. Rizzo Assot:iatcs, Irrc, I N(;llil !_Rt a* ( (lNst ll l-r\\sl\\ Checklist (AWC) RCBX 718 - A CUBICLE 718 Bldg. RCBX Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the area?

No concerns identified regardingJire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

Scaffolding in area identified to be well braced.

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated by: Brian A. Lucarelli 17 of24 N/A N/A lall0/2013 r0ll0l20r3 X X X X Eddie M. Guerra

Sheet l8 of24 Area Walk-By Checklist (AWC) Paul C. Rizeo Associatcs, Inc. E N-C I N EERS e, (a)NSt-! I.TAifTS RCBX 718 - IIAII CUBICLE Status: U N Room Floor El. 7 1 8 Bldg. RCBX Other supporting or relevant documents and photos (if any): File Name: l-67 -977.Spe

== Description:== General View Inside Cubicle File Name: l-68-977.Spg

== Description:== View of Scaffolding in Area

pct? Patrl c. Rizz. Ass'ciatcs, Inc, t\\(.tNI F_R! r\\ LON\\l l.I_\\\\ l ! Area Walk-By Checklist (AWC) RCBX 718. B CUBICLE Status: Sheet 19 of24 U N/A U N/A N/A U NiA N Room Floor El. 7 1 8 Bldg. RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

l. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

4. Does it appear that the area is free of potentially adverse seismic spatial interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

Related equipment on SWEL for this area: sr-24 N N Y N Y N Y X X X X

PC-? laul C. Riez. Ass.t:iatcs, I*t:. []-{;lN[].lit .! l {!N!1.:Lti\\\\1S Area Walk-By Checklist (AWC) RCBX 7I8 - B CUBICLE Sheet 20 of24 Room Floor El. 718 Bldg. RCBX X Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the area?

No concerns identified regardingfire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.9., scaffolding, lead shielding)?

Scaffolding in area identffied to be well braced. Insulation stored in area identified to be properly re strained.

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated by: Date: Eddie M. Guerra Date: Brian A. Lucarelli -r 10t25t2013 t0/2s/2013 X X X

Sheet 2l of 24 Patrl C. Rizzo Associatcs, [nr:. IN(;lNf ERS sa t i]NSt:l-T,{NTl Status: U N Area Walk-By Checklist (AWC) Room Floor El. RCBX 718. B CUBICLE Bldg. RCBX Other supporting or relevant documents and photos (if any): File Name: 100_0435 jpg

== Description:== General View Inside Cubicle File Name: 100_0 437 qpg

== Description:== View of Insulation Storage Area

pc.t? Paul c. Riet. Assqrciatcs, Irrr:. L S{ilNt:r.Rs.! r r}liJt.t t_IA51 5! Area Walk-By Checklist (AWC) Room Floor El. RHR PLATFORM 707 Bldg. RCBX Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments. I. Does anchorage of equipment in the area appear to be free of potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant degraded conditions?

3. Based on a visual inspection from the floor, do the cableiconduit raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

4. Does it appear that the area is free of potentially adverse seismic spatial interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

Related equipment on SWEL for this area: RH.P-IA X Sheet 22 of 24 N/A N/A X X X

PC.'te Patrl c. Riz:' l$ggetrr 1u., [ !i(;lti[ERS $. I r))i\\L: LI\\51 t Area Walk-By Checklist (AWC) Room Floor El. Sheet 23 of24 RHR PLATFORM 707 Bldg. RCBX Interaction Effects

5. Does it appear that the area is free of potentially adverse seismic interactions that could cause flooding or spray in the area?

No concerns identified regardingflood sources.

6. Does it appear that the area is free of potentially adverse seismic interactions that could cause a fire in the area?

No concerns identified regardingfire sources.

7. Does it appear that the area is free of potentially adverse seismic interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary) Evaluated by: Eddie M. Guerra &"tf-li Brian A. Lucarelli X X X X t0lt0l2al3 t0lr0l20t3

Sheet 24 of 24 Paul C. Rizzo Arsociatesr Inc. Area Walk-By Checklist (AWC) Status: Room Floor El. 707 RT{R PLATFORM Bldg. RCBX Other supporting or relevant documents and photos (if any):

== Description:== General View of Heat Exchanger on Platform File Name: l-67-880jpg

== Description:== View of Rigidly Supported Piping File Name: l-69-t79jpg}}

v t e Letter Sequence Other
TAC:MF0092, (Open)
Initiation Acceptance... Administration Questions Answers 10 July 2012 27 November 2012 29 April 2013 29 April 2013 24 September 2013 27 November 2012 Results Approval... Other: L-13-376, Addendum to the Beaver Valley Power Station, Unit No. 1, Near-Term Task Force Recommendation 2.3 Seismic Walkdown Report, ML13135A229, ML13135A230, ML13135A231, ML13135A233, ML13135A234, ML13135A235, ML13135A236, ML13135A237, ML13135A238, ML13135A240, ML13135A241, ML13135A242, ML13135A243, ML13135A244, ML13135A245, ML13135A246, ML13135A247, ML13135A248, ML13135A249, ML13135A251, ML13151A052, ML13295A695, ML14009A089
MONTHYEAR2012-09-28 [Table View]

L-13-376, Addendum to the Beaver Valley Power Station, Unit No. 1, Near-Term Task Force Recommendation 2.3 Seismic Walkdown Report: Difference between revisions

Latest revision as of 23:37, 10 January 2025

Text

SUBJECT:

Enclosure:

Purpose:

SUMMARY

Navigation menu

L-13-376, Addendum to the Beaver Valley Power Station, Unit No. 1, Near-Term Task Force Recommendation 2.3 Seismic Walkdown Report: Difference between revisions

Latest revision as of 23:37, 10 January 2025

Text

SUBJECT:

Enclosure:

Purpose:

SUMMARY

Navigation menu

Search