ML15303A014: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:10/26/2015 U.S. Nuclear Reeulatorv Commission Overations Center Event | {{#Wiki_filter:10/26/2015 U.S. Nuclear Reeulatorv Commission Overations Center Event RevortI Part 21 (PAR) Event# 51496 Rep Org: CRANE NUCLEAR, INC. Notification Date/ITime: | ||
10/23/2015 18:28 (EDT)Supplier: | 10/23/2015 18:28 (EDT)Supplier: | ||
CRANE NUCLEAR, INC. Event Date / Time: 08/26/2015 (CDT)Last Modification: | CRANE NUCLEAR, INC. Event Date / Time: 08/26/2015 (CDT)Last Modification: | ||
10/23/2015 Region: 3 Docket #:City: BOLINGBROOK Agreement State: | 10/23/2015 Region: 3 Docket #: City: BOLINGBROOK Agreement State: Yes County: License #: State: IL NRC Notified by: JASON KLEIN Notifications: | ||
MEL GRAY | MEL GRAY R1DO HQ Ops Officer: DONG HWA PARK PART 2 1/50.55 REACTORS EMAIL Emergency Class: NON EMERGENCY 10 CFR Section: 21.21(d)(3)(i) | ||
DONG HWA PARK PART 2 1/50.55 REACTORS | DEFECTS AND NONCOMPLIANCE PART 21 REPORT -PRESSURE SEAL VALVE NONCOMPLIANCE The following is a summary of a submitted facsimile: "Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs."Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, provides guidance for appropriate material and NDE [Non Destructive Test] requirements for processing valve and valve part orders. The procedure is based on the ASME Code Case N-62, which is ASME B&PV Section III, 2015 Edition, Non-Mandatory Appendix HH 'Rules for Valve Internal and External Items'."A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section II, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination specified."Limited to (1) CNI [Crane Nuclear, INC.] SO# 069000408, Dominion, Millstone. | ||
DEFECTS AND NONCOMPLIANCE PART 21 REPORT -PRESSURE SEAL VALVE NONCOMPLIANCE The following is a summary of a submitted facsimile: | P.O. 954282 and Purchase Req.No. N90136 Quantity shipped = 1, Crane, 8", Fig. 55009-12CF8M-WE, Class 900, ASME Class 1, 1986 Ed."Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630)226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940" OCT. 23.,20i5 5:18PM N01 765 P. 1..... ....TELEPHONE (630) 226-4900 NUCLEAR CRANE NUCLEAR, INC. 860 REMINGTON BOULEVARD BOLINGBROOK, IL. 60440 Date: October 23, 2016 Atln: Document Control Desk U.S. Nuclear Regulatory Commission Washington, D.C. 20655-001 | ||
"Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs."Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, provides guidance for appropriate material | |||
"Limited to (1) CNI [Crane Nuclear, INC.] SO# 069000408, | |||
P.O. 954282 and Purchase Req.No. N90136 Quantity shipped = 1, Crane, 8", Fig. 55009-12CF8M-WE, Class 900, ASME Class 1, 1986 Ed."Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630)226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940" OCT. 23.,20i5 5: | |||
==Subject:== | ==Subject:== | ||
10 CFR Part 21 Investigation Report Notification of Pressure Seal Valve Segment Ring Material Compliance | |||
10 CFR Part 21 Investigation | |||
==Dear Sir or Madam:== | ==Dear Sir or Madam:== | ||
This letter provides notification of the Crane Nuclear, Inc. investigation into ASME Boiler and | This letter provides notification of the Crane Nuclear, Inc. investigation into ASME Boiler and Pressure Vessel Section ]II Code design Pressure Seal Valve orders with segment ring material compliance. | ||
The information required for this notification is provided below:(9 Name and address of the individual or individuals in forming the Commission. | The information required for this notification is provided below: (9 Name and address of the individual or individuals in forming the Commission. | ||
Jason | Jason Klein Engineering Manager Rosalie Nava Director Safety and Quality Crane Nuclear 860 Remington Blvd Bolinigbrook, IL 60440 ((9i)Identification of the basic component supplied for such facility or such activity within the United States which may fail to comply or contains a potential defect Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs.(iii) Identification of the firm supplying the basic component which fails to comply or contains a defect.Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (iv) Nature of the defect or failure to comply and the safety hazard which is created or could be created by such defeat or failure to comply.Crane Nuclear "Classification of Valve Parts", Procedure 03-107, provides guidance for appropriate material and NDE requirements for processing valve and valve part orders. Th~e procedure is based on the ASME Code Case N-62, which is ASME B&PV Section I11, 2015 Edition, Non-Mandatory Appendix HH "Rules for Valve Internal and External Items".A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section 1i, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination speoified. | ||
Page 1 of 2 OCT. 23. 2Q15 5:18PM NO. 765 P. 2~CR~ gJ (630) | Page 1 of 2 OCT. 23. 2Q15 5:18PM NO. 765 P. 2~CR~ gJ (630) | ||
' www.oranenuclear,¢orn CRANE NUCLEAR, INC. $60 REMINGTON BOULEVARD BOLINOBROOK, IL. 60440(v) The date on which the information of such defect or failure to comply was obtained. | ' www.oranenuclear,¢orn CRANE NUCLEAR, INC. $60 REMINGTON BOULEVARD BOLINOBROOK, IL. 60440 (v) The date on which the information of such defect or failure to comply was obtained.August 26" 2015 (vi) In the case of a basic component which contains a defect or fails to comply, the number and location of these components in use at, supplied for, being supplied for, or may be supplied for, manufactured, or being manufactured for one or more fadilities or activities subject to the regulations in this part.Unmited to (1) CNI SO# 069000408, Dominion 1 Millstone, P.O. 954282 and Purchase Req. No.N90136-D1-Quantity shipped = I, Crane, B", Fig. 56009-l2CFBM-WE, Class 900, AS E Class 1, 1986 Ed. F (vii) The corrective action which has been, is being, or will be taken; the name of the individua( or organization responsible for the action; and the length of time that has been or will be taken to comnp ete the action.Training was held for engineers involved in classification of components for pressure seal designs (integral yoke, retaining rings, and segment rings) completed 8/1 0/156.A "where-used" was determined for all pressure seal valve design orders and completed 8/23/'15.Crane also conducted a dual path search of the CNI drawing database to validate the order search.Revised Crane Nuclear Procedure 03-107 to add figures reflecting configurations and clarify classifications completed 8/24/16. The segment ring classification was clarified as pressure retaining material with this revision.CNI Design Report. Reconciliation of the segment ring material for the order identified was completed 10/23/15.(viii) Any advice related to the defect or failure to comply about the facility, activity, or basic component that has been, is being, or will be given to purchasers or licensee's. | ||
August 26" 2015(vi) In the case of a basic component which contains a defect or fails to comply, the number | Crane Nuclear has notified the customer of the issue identified.(ix) In the case of an early site permit, the entities to whom an early site permit was transferred. | ||
Crane also conducted a dual path search of the CNI drawing database to validate the order search.Revised Crane Nuclear Procedure 03-107 to add figures reflecting configurations and | |||
The segment ring classification was clarified as pressure retaining material with this revision. | |||
CNI Design Report. Reconciliation of the segment ring material for the order identified was completed 10/23/15. | |||
(viii) Any advice related to the defect or failure to comply about the facility, | |||
Crane Nuclear has notified the customer of the issue identified. | |||
(ix) In the case of an early site permit, the entities to whom an early site permit was transferred. | |||
Not applicable. | Not applicable. | ||
Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630) 226-4953 or Rosalie Naya, Director of Safety and Quality at (630) 226-4940. | Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630) 226-4953 or Rosalie Naya, Director of Safety and Quality at (630) 226-4940.Regards, Nuclea, inc."Jason Klein of Engineering | ||
Regards,Nuclea, inc."Jason Klein of Engineering | ;Page 2 of 2 10/26/2015 U.S. Nuclear Reeulatorv Commission Overations Center Event RevortI Part 21 (PAR) Event# 51496 Rep Org: CRANE NUCLEAR, INC. Notification Date/ITime: | ||
;Page 2 of 2 10/26/2015 U.S. Nuclear Reeulatorv Commission Overations Center Event | |||
10/23/2015 18:28 (EDT)Supplier: | 10/23/2015 18:28 (EDT)Supplier: | ||
CRANE NUCLEAR, INC. Event Date / Time: 08/26/2015 (CDT)Last Modification: | CRANE NUCLEAR, INC. Event Date / Time: 08/26/2015 (CDT)Last Modification: | ||
10/23/2015 Region: 3 Docket #:City: BOLINGBROOK Agreement State: | 10/23/2015 Region: 3 Docket #: City: BOLINGBROOK Agreement State: Yes County: License #: State: IL NRC Notified by: JASON KLEIN Notifications: | ||
MEL GRAY | MEL GRAY R1DO HQ Ops Officer: DONG HWA PARK PART 2 1/50.55 REACTORS EMAIL Emergency Class: NON EMERGENCY 10 CFR Section: 21.21(d)(3)(i) | ||
DONG HWA PARK PART 2 1/50.55 REACTORS | DEFECTS AND NONCOMPLIANCE PART 21 REPORT -PRESSURE SEAL VALVE NONCOMPLIANCE The following is a summary of a submitted facsimile: "Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs."Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, provides guidance for appropriate material and NDE [Non Destructive Test] requirements for processing valve and valve part orders. The procedure is based on the ASME Code Case N-62, which is ASME B&PV Section III, 2015 Edition, Non-Mandatory Appendix HH 'Rules for Valve Internal and External Items'."A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section II, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination specified."Limited to (1) CNI [Crane Nuclear, INC.] SO# 069000408, Dominion, Millstone. | ||
DEFECTS AND NONCOMPLIANCE PART 21 REPORT -PRESSURE SEAL VALVE NONCOMPLIANCE The following is a summary of a submitted facsimile: | P.O. 954282 and Purchase Req.No. N90136 Quantity shipped = 1, Crane, 8", Fig. 55009-12CF8M-WE, Class 900, ASME Class 1, 1986 Ed."Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630)226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940" OCT. 23.,20i5 5:18PM N01 765 P. 1..... ....TELEPHONE (630) 226-4900 NUCLEAR CRANE NUCLEAR, INC. 860 REMINGTON BOULEVARD BOLINGBROOK, IL. 60440 Date: October 23, 2016 Atln: Document Control Desk U.S. Nuclear Regulatory Commission Washington, D.C. 20655-001 | ||
"Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs."Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, provides guidance for appropriate material | |||
"Limited to (1) CNI [Crane Nuclear, INC.] SO# 069000408, | |||
P.O. 954282 and Purchase Req.No. N90136 Quantity shipped = 1, Crane, 8", Fig. 55009-12CF8M-WE, Class 900, ASME Class 1, 1986 Ed."Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630)226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940" OCT. 23.,20i5 5: | |||
==Subject:== | ==Subject:== | ||
10 CFR Part 21 Investigation Report Notification of Pressure Seal Valve Segment Ring Material Compliance | |||
10 CFR Part 21 Investigation | |||
==Dear Sir or Madam:== | ==Dear Sir or Madam:== | ||
This letter provides notification of the Crane Nuclear, Inc. investigation into ASME Boiler and | This letter provides notification of the Crane Nuclear, Inc. investigation into ASME Boiler and Pressure Vessel Section ]II Code design Pressure Seal Valve orders with segment ring material compliance. | ||
The information required for this notification is provided below:(9 Name and address of the individual or individuals in forming the Commission. | The information required for this notification is provided below: (9 Name and address of the individual or individuals in forming the Commission. | ||
Jason | Jason Klein Engineering Manager Rosalie Nava Director Safety and Quality Crane Nuclear 860 Remington Blvd Bolinigbrook, IL 60440 ((9i)Identification of the basic component supplied for such facility or such activity within the United States which may fail to comply or contains a potential defect Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs.(iii) Identification of the firm supplying the basic component which fails to comply or contains a defect.Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (iv) Nature of the defect or failure to comply and the safety hazard which is created or could be created by such defeat or failure to comply.Crane Nuclear "Classification of Valve Parts", Procedure 03-107, provides guidance for appropriate material and NDE requirements for processing valve and valve part orders. Th~e procedure is based on the ASME Code Case N-62, which is ASME B&PV Section I11, 2015 Edition, Non-Mandatory Appendix HH "Rules for Valve Internal and External Items".A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section 1i, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination speoified. | ||
Page 1 of 2 OCT. 23. 2Q15 5:18PM NO. 765 P. 2~CR~ gJ (630) | Page 1 of 2 OCT. 23. 2Q15 5:18PM NO. 765 P. 2~CR~ gJ (630) | ||
' www.oranenuclear,¢orn CRANE NUCLEAR, INC. $60 REMINGTON BOULEVARD BOLINOBROOK, IL. 60440(v) The date on which the information of such defect or failure to comply was obtained. | ' www.oranenuclear,¢orn CRANE NUCLEAR, INC. $60 REMINGTON BOULEVARD BOLINOBROOK, IL. 60440 (v) The date on which the information of such defect or failure to comply was obtained.August 26" 2015 (vi) In the case of a basic component which contains a defect or fails to comply, the number and location of these components in use at, supplied for, being supplied for, or may be supplied for, manufactured, or being manufactured for one or more fadilities or activities subject to the regulations in this part.Unmited to (1) CNI SO# 069000408, Dominion 1 Millstone, P.O. 954282 and Purchase Req. No.N90136-D1-Quantity shipped = I, Crane, B", Fig. 56009-l2CFBM-WE, Class 900, AS E Class 1, 1986 Ed. F (vii) The corrective action which has been, is being, or will be taken; the name of the individua( or organization responsible for the action; and the length of time that has been or will be taken to comnp ete the action.Training was held for engineers involved in classification of components for pressure seal designs (integral yoke, retaining rings, and segment rings) completed 8/1 0/156.A "where-used" was determined for all pressure seal valve design orders and completed 8/23/'15.Crane also conducted a dual path search of the CNI drawing database to validate the order search.Revised Crane Nuclear Procedure 03-107 to add figures reflecting configurations and clarify classifications completed 8/24/16. The segment ring classification was clarified as pressure retaining material with this revision.CNI Design Report. Reconciliation of the segment ring material for the order identified was completed 10/23/15.(viii) Any advice related to the defect or failure to comply about the facility, activity, or basic component that has been, is being, or will be given to purchasers or licensee's. | ||
August 26" 2015(vi) In the case of a basic component which contains a defect or fails to comply, the number | Crane Nuclear has notified the customer of the issue identified.(ix) In the case of an early site permit, the entities to whom an early site permit was transferred. | ||
Crane also conducted a dual path search of the CNI drawing database to validate the order search.Revised Crane Nuclear Procedure 03-107 to add figures reflecting configurations and | |||
The segment ring classification was clarified as pressure retaining material with this revision. | |||
CNI Design Report. Reconciliation of the segment ring material for the order identified was completed 10/23/15. | |||
(viii) Any advice related to the defect or failure to comply about the facility, | |||
Crane Nuclear has notified the customer of the issue identified. | |||
(ix) In the case of an early site permit, the entities to whom an early site permit was transferred. | |||
Not applicable. | Not applicable. | ||
Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630) 226-4953 or Rosalie Naya, Director of Safety and Quality at (630) 226-4940. | Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630) 226-4953 or Rosalie Naya, Director of Safety and Quality at (630) 226-4940.Regards, Nuclea, inc."Jason Klein of Engineering | ||
Regards,Nuclea, inc."Jason Klein of Engineering | |||
;Page 2 of 2}} | ;Page 2 of 2}} |
Revision as of 20:44, 8 July 2018
ML15303A014 | |
Person / Time | |
---|---|
Site: | Millstone |
Issue date: | 10/26/2015 |
From: | Klein J Crane Nuclear |
To: | Document Control Desk, Office of Nuclear Reactor Regulation |
References | |
51496 | |
Download: ML15303A014 (3) | |
Text
10/26/2015 U.S. Nuclear Reeulatorv Commission Overations Center Event RevortI Part 21 (PAR) Event# 51496 Rep Org: CRANE NUCLEAR, INC. Notification Date/ITime:
10/23/2015 18:28 (EDT)Supplier:
CRANE NUCLEAR, INC. Event Date / Time: 08/26/2015 (CDT)Last Modification:
10/23/2015 Region: 3 Docket #: City: BOLINGBROOK Agreement State: Yes County: License #: State: IL NRC Notified by: JASON KLEIN Notifications:
MEL GRAY R1DO HQ Ops Officer: DONG HWA PARK PART 2 1/50.55 REACTORS EMAIL Emergency Class: NON EMERGENCY 10 CFR Section: 21.21(d)(3)(i)
DEFECTS AND NONCOMPLIANCE PART 21 REPORT -PRESSURE SEAL VALVE NONCOMPLIANCE The following is a summary of a submitted facsimile: "Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs."Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, provides guidance for appropriate material and NDE [Non Destructive Test] requirements for processing valve and valve part orders. The procedure is based on the ASME Code Case N-62, which is ASME B&PV Section III, 2015 Edition, Non-Mandatory Appendix HH 'Rules for Valve Internal and External Items'."A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section II, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination specified."Limited to (1) CNI [Crane Nuclear, INC.] SO# 069000408, Dominion, Millstone.
P.O. 954282 and Purchase Req.No. N90136 Quantity shipped = 1, Crane, 8", Fig. 55009-12CF8M-WE, Class 900, ASME Class 1, 1986 Ed."Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630)226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940" OCT. 23.,20i5 5:18PM N01 765 P. 1..... ....TELEPHONE (630) 226-4900 NUCLEAR CRANE NUCLEAR, INC. 860 REMINGTON BOULEVARD BOLINGBROOK, IL. 60440 Date: October 23, 2016 Atln: Document Control Desk U.S. Nuclear Regulatory Commission Washington, D.C. 20655-001
Subject:
10 CFR Part 21 Investigation Report Notification of Pressure Seal Valve Segment Ring Material Compliance
Dear Sir or Madam:
This letter provides notification of the Crane Nuclear, Inc. investigation into ASME Boiler and Pressure Vessel Section ]II Code design Pressure Seal Valve orders with segment ring material compliance.
The information required for this notification is provided below: (9 Name and address of the individual or individuals in forming the Commission.
Jason Klein Engineering Manager Rosalie Nava Director Safety and Quality Crane Nuclear 860 Remington Blvd Bolinigbrook, IL 60440 ((9i)Identification of the basic component supplied for such facility or such activity within the United States which may fail to comply or contains a potential defect Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs.(iii) Identification of the firm supplying the basic component which fails to comply or contains a defect.Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (iv) Nature of the defect or failure to comply and the safety hazard which is created or could be created by such defeat or failure to comply.Crane Nuclear "Classification of Valve Parts", Procedure 03-107, provides guidance for appropriate material and NDE requirements for processing valve and valve part orders. Th~e procedure is based on the ASME Code Case N-62, which is ASME B&PV Section I11, 2015 Edition, Non-Mandatory Appendix HH "Rules for Valve Internal and External Items".A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section 1i, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination speoified.
Page 1 of 2 OCT. 23. 2Q15 5:18PM NO. 765 P. 2~CR~ gJ (630)
' www.oranenuclear,¢orn CRANE NUCLEAR, INC. $60 REMINGTON BOULEVARD BOLINOBROOK, IL. 60440 (v) The date on which the information of such defect or failure to comply was obtained.August 26" 2015 (vi) In the case of a basic component which contains a defect or fails to comply, the number and location of these components in use at, supplied for, being supplied for, or may be supplied for, manufactured, or being manufactured for one or more fadilities or activities subject to the regulations in this part.Unmited to (1) CNI SO# 069000408, Dominion 1 Millstone, P.O. 954282 and Purchase Req. No.N90136-D1-Quantity shipped = I, Crane, B", Fig. 56009-l2CFBM-WE, Class 900, AS E Class 1, 1986 Ed. F (vii) The corrective action which has been, is being, or will be taken; the name of the individua( or organization responsible for the action; and the length of time that has been or will be taken to comnp ete the action.Training was held for engineers involved in classification of components for pressure seal designs (integral yoke, retaining rings, and segment rings) completed 8/1 0/156.A "where-used" was determined for all pressure seal valve design orders and completed 8/23/'15.Crane also conducted a dual path search of the CNI drawing database to validate the order search.Revised Crane Nuclear Procedure 03-107 to add figures reflecting configurations and clarify classifications completed 8/24/16. The segment ring classification was clarified as pressure retaining material with this revision.CNI Design Report. Reconciliation of the segment ring material for the order identified was completed 10/23/15.(viii) Any advice related to the defect or failure to comply about the facility, activity, or basic component that has been, is being, or will be given to purchasers or licensee's.
Crane Nuclear has notified the customer of the issue identified.(ix) In the case of an early site permit, the entities to whom an early site permit was transferred.
Not applicable.
Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630) 226-4953 or Rosalie Naya, Director of Safety and Quality at (630) 226-4940.Regards, Nuclea, inc."Jason Klein of Engineering
- Page 2 of 2 10/26/2015 U.S. Nuclear Reeulatorv Commission Overations Center Event RevortI Part 21 (PAR) Event# 51496 Rep Org
- CRANE NUCLEAR, INC. Notification Date/ITime:
10/23/2015 18:28 (EDT)Supplier:
CRANE NUCLEAR, INC. Event Date / Time: 08/26/2015 (CDT)Last Modification:
10/23/2015 Region: 3 Docket #: City: BOLINGBROOK Agreement State: Yes County: License #: State: IL NRC Notified by: JASON KLEIN Notifications:
MEL GRAY R1DO HQ Ops Officer: DONG HWA PARK PART 2 1/50.55 REACTORS EMAIL Emergency Class: NON EMERGENCY 10 CFR Section: 21.21(d)(3)(i)
DEFECTS AND NONCOMPLIANCE PART 21 REPORT -PRESSURE SEAL VALVE NONCOMPLIANCE The following is a summary of a submitted facsimile: "Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs."Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, provides guidance for appropriate material and NDE [Non Destructive Test] requirements for processing valve and valve part orders. The procedure is based on the ASME Code Case N-62, which is ASME B&PV Section III, 2015 Edition, Non-Mandatory Appendix HH 'Rules for Valve Internal and External Items'."A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section II, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination specified."Limited to (1) CNI [Crane Nuclear, INC.] SO# 069000408, Dominion, Millstone.
P.O. 954282 and Purchase Req.No. N90136 Quantity shipped = 1, Crane, 8", Fig. 55009-12CF8M-WE, Class 900, ASME Class 1, 1986 Ed."Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630)226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940" OCT. 23.,20i5 5:18PM N01 765 P. 1..... ....TELEPHONE (630) 226-4900 NUCLEAR CRANE NUCLEAR, INC. 860 REMINGTON BOULEVARD BOLINGBROOK, IL. 60440 Date: October 23, 2016 Atln: Document Control Desk U.S. Nuclear Regulatory Commission Washington, D.C. 20655-001
Subject:
10 CFR Part 21 Investigation Report Notification of Pressure Seal Valve Segment Ring Material Compliance
Dear Sir or Madam:
This letter provides notification of the Crane Nuclear, Inc. investigation into ASME Boiler and Pressure Vessel Section ]II Code design Pressure Seal Valve orders with segment ring material compliance.
The information required for this notification is provided below: (9 Name and address of the individual or individuals in forming the Commission.
Jason Klein Engineering Manager Rosalie Nava Director Safety and Quality Crane Nuclear 860 Remington Blvd Bolinigbrook, IL 60440 ((9i)Identification of the basic component supplied for such facility or such activity within the United States which may fail to comply or contains a potential defect Pressure Seal Valve orders may potentially have misclassified material and non-destructive examination requirements for segment ring designs.(iii) Identification of the firm supplying the basic component which fails to comply or contains a defect.Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (iv) Nature of the defect or failure to comply and the safety hazard which is created or could be created by such defeat or failure to comply.Crane Nuclear "Classification of Valve Parts", Procedure 03-107, provides guidance for appropriate material and NDE requirements for processing valve and valve part orders. Th~e procedure is based on the ASME Code Case N-62, which is ASME B&PV Section I11, 2015 Edition, Non-Mandatory Appendix HH "Rules for Valve Internal and External Items".A pressure seal valve segment ring requires the material to be purchased Safety Related, ASME B&PV Section 1i, Part D materials, and required NDE (reference Category 3 valve items per N-62). A segment ring may have been processed to material requirements not as pressure retaining material per NX-2000 of the Code resulting in the incorrect material specification and non-destructive examination speoified.
Page 1 of 2 OCT. 23. 2Q15 5:18PM NO. 765 P. 2~CR~ gJ (630)
' www.oranenuclear,¢orn CRANE NUCLEAR, INC. $60 REMINGTON BOULEVARD BOLINOBROOK, IL. 60440 (v) The date on which the information of such defect or failure to comply was obtained.August 26" 2015 (vi) In the case of a basic component which contains a defect or fails to comply, the number and location of these components in use at, supplied for, being supplied for, or may be supplied for, manufactured, or being manufactured for one or more fadilities or activities subject to the regulations in this part.Unmited to (1) CNI SO# 069000408, Dominion 1 Millstone, P.O. 954282 and Purchase Req. No.N90136-D1-Quantity shipped = I, Crane, B", Fig. 56009-l2CFBM-WE, Class 900, AS E Class 1, 1986 Ed. F (vii) The corrective action which has been, is being, or will be taken; the name of the individua( or organization responsible for the action; and the length of time that has been or will be taken to comnp ete the action.Training was held for engineers involved in classification of components for pressure seal designs (integral yoke, retaining rings, and segment rings) completed 8/1 0/156.A "where-used" was determined for all pressure seal valve design orders and completed 8/23/'15.Crane also conducted a dual path search of the CNI drawing database to validate the order search.Revised Crane Nuclear Procedure 03-107 to add figures reflecting configurations and clarify classifications completed 8/24/16. The segment ring classification was clarified as pressure retaining material with this revision.CNI Design Report. Reconciliation of the segment ring material for the order identified was completed 10/23/15.(viii) Any advice related to the defect or failure to comply about the facility, activity, or basic component that has been, is being, or will be given to purchasers or licensee's.
Crane Nuclear has notified the customer of the issue identified.(ix) In the case of an early site permit, the entities to whom an early site permit was transferred.
Not applicable.
Should you have any questions regarding this matter, please contact Jason Klein, Engineering Manager at (630) 226-4953 or Rosalie Naya, Director of Safety and Quality at (630) 226-4940.Regards, Nuclea, inc."Jason Klein of Engineering
- Page 2 of 2