LIC-13-0070, Engineering Report EA12-021, Revision 1, Seismic Walkdown Submittal Report for Resolution of Fukushima Near-Term Force Recommendation 2.3: Seismic. Part 1 of 2: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
 
(Created page by program invented by StriderTol)
 
(3 intermediate revisions by the same user not shown)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:LIC-13-0070 Attachment Page 1 EA12-021, Revision 1 Updates Pages or Attachments Updated in EAl 2-021, Revision 1 (Provided in Enclosure 1): Pages 1 though 42 Attachment 11.1, Page 28 of 30 Attachment 11.2 Attachment 11.4 Attachment 11.5 Attachment 11.7 Not Provided (No Changes from Revision 0): Attachment 11.3 Attachment 11.6 LIC-1 3-0070 Enclosure 1 Page 1 EA12-021, Seismic Walkdown Submittal Report, Revision 1 OMAHA PUBLIC POWER DISTRICT FORT CALHOUN NUCLEAR STATION SEISMIC WALKDOWN SUBMITTAL REPORT for Resolution of Fukushima Near-Term Task Force Recommendation 2°3: Seismic Engineering Repodt Type;~Li ', ion EG No. N/A LNo Prepared by: Kevin Bessell (ENERCON)Date: 4:Th12013 (Pnnt NeIS~prt)Re viei eby: Laura Macl yNERCONt_0 (Pin r (2 Jim Carison Peer I metSign)gerj(int NameitS Jan Bostelmnak.
{{#Wiki_filter:LIC-13-0070 Attachment Page 1 EA12-021, Revision 1 Updates Pages or Attachments Updated in EAl 2-021, Revision 1 (Provided in Enclosure 1):
al5 (~k Approved by:~'t~ ~1 Other (Print NamefSign)
Pages 1 though 42 1.1, Page 28 of 30 1.2 1.4 1.5 1.7 Not Provided (No Changes from Revision 0): 1.3 1.6
I wENGINEERING REPORT NO. EA1 2-021 Fu. hm E E Na ERCO N 2.3 S OF 1IAE2 F4 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
LIC-1 3-0070 Page 1 EA12-021, Seismic Walkdown Submittal Report, Revision 1
Walkdown TABLE OF CONTENTS Section Paqe LIST OF TABLES 3 1.0 SCOPE AND OBJECTIVE 4 2.0 SEISMIC LICENSING BASIS  
 
OMAHA PUBLIC POWER DISTRICT FORT CALHOUN NUCLEAR STATION SEISMIC WALKDOWN SUBMITTAL REPORT for Resolution of Fukushima Near-Term Task Force Recommendation 2°3: Seismic Engineering Repodt Type; N',*ew ~Li        ', ion EG No. N/A LNo Prepared by:    Kevin Bessell (ENERCON)                              Date: 4:Th12013 (Pnnt NeIS~prt)
Re viei eby:    Laura Macl yNERCONt_
0      (Pin    r Jim Carison (2
Peer I                            metSign) gerj(int NameitS Approved by:    Jan Bostelmnak.                al5
(~k                    ~'t~  ~1 Other (Print NamefSign)
I
 
wENGINEERING                                      REPORT NO. EA1 2-021 Fu. hm        EE Na  ERCO N
              *"**'*"*'*,*':*c*,,7*;;*,*,REVISION      2.3 S 1IAE2              F4 OF Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown TABLE OF CONTENTS Section                                                                     Paqe LIST OF TABLES                                                                   3 1.0 SCOPE AND OBJECTIVE                                                         4 2.0 SEISMIC LICENSING BASIS  


==SUMMARY==
==SUMMARY==
7 2.1 SAFE SHUTDOWN EARTHQUAKE 7 2.2 DESIGN CODES, STANDARDS, AND METHODS 10 3.0 SEISMIC WALK-DOWN PROGRAM IMPLEMENTATION APPROACH 12 4.0 PERSONNEL QUALIFICATIONS 14 4.1 SEISMIC WALK-DOWN TEAM 15 4.2 PEER REVIEW TEAM 20 5.0 IPEEE VULNERABILITIES REPORTING 21 6.0 SEISMIC WALK-DOWN EQUIPMENT LIST DEVELOPMENT 24 6.1 SAMPLE OF REQUIRED ITEMS FOR THE FIVE SAFETY FUNCTIONS 25 6.2 SPENT FUEL POOL (SFP) ITEMS 27 7.0 SEISMIC WALK-DOWNS AND AREA WALK-BYS 30 8.0 LICENSING BASIS EVALUATION 32 8.1 LICENSING BASIS EVALUATIONS 32 8.2 CORRECTIVE ACTON PROGRAM ENTRIES 33 8.3 PLANT CHANGES 34 9.0 PEER REVIEW 35 9.1 PEER REVIEW PROCESS 35 9.2 PEER REVIEW RESULTS  
7 2.1 SAFE SHUTDOWN EARTHQUAKE                                                 7 2.2 DESIGN CODES, STANDARDS, AND METHODS                                     10 3.0 SEISMIC WALK-DOWN PROGRAM IMPLEMENTATION APPROACH                         12 4.0 PERSONNEL QUALIFICATIONS                                                   14 4.1 SEISMIC WALK-DOWN TEAM                                                   15 4.2 PEER REVIEW TEAM                                                         20 5.0 IPEEE VULNERABILITIES REPORTING                                           21 6.0 SEISMIC WALK-DOWN EQUIPMENT LIST DEVELOPMENT                               24 6.1 SAMPLE OF REQUIRED ITEMS FOR THE FIVE SAFETY FUNCTIONS                   25 6.2 SPENT FUEL POOL (SFP) ITEMS                                               27 7.0 SEISMIC WALK-DOWNS AND AREA WALK-BYS                                       30 8.0 LICENSING BASIS EVALUATION                                                 32 8.1 LICENSING BASIS EVALUATIONS                                             32 8.2 CORRECTIVE ACTON PROGRAM ENTRIES                                         33 8.3 PLANT CHANGES                                                             34 9.0 PEER REVIEW                                                               35 9.1 PEER REVIEW PROCESS                                                       35 9.2 PEER REVIEW RESULTS  


==SUMMARY==
==SUMMARY==
37  
37


==10.0 REFERENCES==
==10.0 REFERENCES==
39 11.0 ATTACHMENTS                                                              42


39 11.0 ATTACHMENTS 42 400* ENGINEERING REPORT NO. EA12-021 lt!Tn ýtnUENERCON Fukushima N ear-Term;Task ForceRecommendREVISION 2 PAGE 3 OF 42 Fukushima Near-Term Task Force Recommendation  
400*                                       ENGINEERING REPORT NO. EA12-021 lt!Tn ýtnUENERCON Fukushima N     ear-Term;Task ForceRecommendREVISION 2       PAGE 3 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown LIST OF FIGURES Page Figure 1                                                                           9 Figure 2                                                                         239 1 LIST OF TABLES Page Table 1 - Personnel Function                                                     14 Table 2 - Summary of Peer Reviewed Checklists                                   38
 
===2.3 Seismic===
Walkdown LIST OF FIGURES Page Figure 1 Figure 2 9 9 23 1 LIST OF TABLES Table 1 -Personnel Function Table 2 -Summary of Peer Reviewed Checklists Page 14 38 ENGINEERING REPORT NO. EA12-021 JENERCON...... .. ..... Lc:.,- E al REVISION I PAGE 4 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
ENGINEERING REPORT NO. EA12-021 JENERCON Lc:.,-  E  aldo*./*      REVISION I            PAGE 4 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 1.0 SCOPE AND OBJECTIVE This report documents the results of the seismic walkdown effort at the Omaha Public Power District (OPPD) Fort Calhoun Nuclear Station, for resolution of the Fukushima Near Term Task Force (NTTF) Recommendation 2.3: Seismic.
Walkdown 1.0 SCOPE AND OBJECTIVE This report documents the results of the seismic walkdown effort at the Omaha Public Power District (OPPD) Fort Calhoun Nuclear Station, for resolution of the Fukushima Near Term Task Force (NTTF) Recommendation 2.3: Seismic.The objective of the walkdown effort is to provide response to the Title 10 of the Code of Federal Regulations, Section 50.54(f) letter (10 CFR 50.54(f))
The objective of the walkdown effort is to provide response to the Title 10 of the Code of Federal Regulations, Section 50.54(f) letter (10 CFR 50.54(f)) issued by the Nuclear Regulatory Commission (NRC) on March 12, 2012 (Reference [10.1]). US nuclear power plants are "required to perform seismic walkdowns to identify and address degraded, non-conforming or unanalyzed conditions and to verify the current plant configuration with respect to the current seismic licensing basis". The Nuclear Energy Institute (NEI), through the Electric Power Research Institute (EPRI), prepared industry guidance to assist licensees in responding to this NRC request. During the walkdowns, a sample of components and areas of the plant are examined to identify potentially adverse seismic conditions, within the guidelines and parameters provided in the EPRI report 1025286 "Seismic Walkdown Guidance for Resolution of Fukushima Near-Term Task Force Recommendation 2.3: Seismic", dated June 2012 (Reference [10.2]) and endorsed by the NRC on May 31, 2012. This report will be referred to as the "EPRI Guidance"for the remainder of this document. Omaha Public Power District (OPPD)
issued by the Nuclear Regulatory Commission (NRC) on March 12, 2012 (Reference  
Fort Calhoun Nuclear Station (FCNS) has committed to using this NRC endorsed guidance as the basis for the walkdowns and this report.
[10.1]). US nuclear power plants are "required to perform seismic walkdowns to identify and address degraded, non-conforming or unanalyzed conditions and to verify the current plant configuration with respect to the current seismic licensing basis". The Nuclear Energy Institute (NEI), through the Electric Power Research Institute (EPRI), prepared industry guidance to assist licensees in responding to this NRC request. During the walkdowns, a sample of components and areas of the plant are examined to identify potentially adverse seismic conditions, within the guidelines and parameters provided in the EPRI report 1025286 "Seismic Walkdown Guidance for Resolution of Fukushima Near-Term Task Force Recommendation 2.3: Seismic", dated June 2012 (Reference  
The sample of components selected for walkdown inspection must be suitably diverse, be located in a variety of environments, include items needed to safely shutdown the reactor, maintain containment integrity, and avoid unanticipated rapid drain-down of the spent fuel pool. The walkdowns primarily focus on equipment anchorage, seismic spatial interaction, seismically induced fire and seismically induced flood.
[10.2]) and endorsed by the NRC on May 31, 2012. This report will be referred to as the "EPRI Guidance" for the remainder of this document.
Omaha Public Power District (OPPD)Fort Calhoun Nuclear Station (FCNS) has committed to using this NRC endorsed guidance as the basis for the walkdowns and this report.The sample of components selected for walkdown inspection must be suitably diverse, be located in a variety of environments, include items needed to safely shutdown the reactor, maintain containment integrity, and avoid unanticipated rapid drain-down of the spent fuel pool. The walkdowns primarily focus on equipment anchorage, seismic spatial interaction, seismically induced fire and seismically induced flood.
16I00- EN CENGINEERING REPORT NO. EA12-021f- ,
daiREVISION 1 PAGE 5 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
16I00-EN              CENGINEERING            REPORT NO. EA12-021 f-, .'ev-f-,qPC*.erl*
Walkdown Section 6.0 describes the equipment and component selection process. The selected sample of components constitutes the Seismic Walkdown Equipment List (SWEL). In addition to seismic equipment/component walkdowns (SWD), "area walk-bys" were performed to ensure that there were no other potentially adverse seismic conditions in an approximate 35 foot radius surrounding each component on the SWEL. The seismic walkdown teams consisted of two seismic walkdown engineers (SWE). In cases where multiple SWEL items were located in the same room/area of the plant, a single area walk-by was conducted for those items.The results of the seismic walkdowns and walk-bys are documented on the Seismic Walkdown Checklists (SWC) and Area Walk-by Checklists (AWC). Any potentially adverse seismic conditions discovered during the walkdowns and identified on the SWC's or AWC's, that could not readily be shown to meet the Current Licensing Basis (CLB), were entered into the plant's Corrective Action Program (CAP) for documentation, evaluation and resolution.
Ef**                daiREVISION    1          PAGE 5 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Section 6.0 describes the equipment and component selection process. The selected sample of components constitutes the Seismic Walkdown Equipment List (SWEL). In addition to seismic equipment/component walkdowns (SWD), "area walk-bys" were performed to ensure that there were no other potentially adverse seismic conditions in an approximate 35 foot radius surrounding each component on the SWEL. The seismic walkdown teams consisted of two seismic walkdown engineers (SWE). In cases where multiple SWEL items were located in the same room/area of the plant, a single area walk-by was conducted for those items.
Description of the walkdown process is provided in more detail in Section 7.0; results are provided in Attachments 11.2, 11.3, 11.4.Licensing Basis Evaluations (LBEs) were performed as part of the resolution of the Condition Reports (CR) that were initiated to document potentially adverse seismic conditions.
The results of the seismic walkdowns and walk-bys are documented on the Seismic Walkdown Checklists (SWC) and Area Walk-by Checklists (AWC). Any potentially adverse seismic conditions discovered during the walkdowns and identified on the SWC's or AWC's, that could not readily be shown to meet the Current Licensing Basis (CLB), were entered into the plant's Corrective Action Program (CAP) for documentation, evaluation and resolution. Description of the walkdown process is provided in more detail in Section 7.0; results are provided in Attachments 11.2, 11.3, 11.4.
The LBE process is described in more detail in Section 8.0; results of the evaluations are summarized in Attachment 11.4.A Peer Review team was formed to review all aspects of the effort, including the development of the SWEL, the consideration of vulnerabilities identified in the 1990's under the Individual Plant Examination of External Events (IPEEE) program, the performance of SWEs during walkdowns and area walk-bys, the Licensing Basis Evaluation process, and this Submittal Report. The Peer Review process is described in more detail in Section 9.0; results are included in Attachments 11.6 and 11.7.  
Licensing Basis Evaluations (LBEs) were performed as part of the resolution of the Condition Reports (CR) that were initiated to document potentially adverse seismic conditions. The LBE process is described in more detail in Section 8.0; results of the evaluations are summarized in Attachment 11.4.
,-. .~~~ NRC N ENGINEERING REPORT NO. EA1 2-021... .. ...
A Peer Review team was formed to review all aspects of the effort, including the development of the SWEL, the consideration of vulnerabilities identified in the 1990's under the Individual Plant Examination of External Events (IPEEE) program, the performance of SWEs during walkdowns and area walk-bys, the Licensing Basis Evaluation process, and this Submittal Report. The Peer Review process is described in more detail in Section 9.0; results are included in Attachments 11.6 and 11.7.
I PAGE 6 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
                        ,-.NRC
Walkdown In accordance with the EPRI Guidance, the following topics are addressed in the subsequent sections of this report:* Seismic Licensing Basis Summary* Personnel Qualifications
                              . ~~~    N        ENGINEERING REPORT NO. EA1 2-021
* Selection of Systems, Structures and Components (SSCs)* Seismic Walkdowns and Area Walk-bys" Licensing Basis Evaluations
            ...  ..  ...  ,c**c**,*'*;*.4,*REVISION      I          PAGE 6 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown In accordance with the EPRI Guidance, the following topics are addressed in the subsequent sections of this report:
* IPEEE Vulnerabilities Resolution Report* Peer Review  
* Seismic Licensing Basis Summary
.1 iENGINEERING REPORT NO. EA12-021 NI ENERCON.. ..' .REVISION 1 PAGE 7 OF 42 Fukushima Near-Term Task Force Recommendation
* Personnel Qualifications
* Selection of Systems, Structures and Components (SSCs)
* Seismic Walkdowns and Area Walk-bys
    "   Licensing Basis Evaluations
* IPEEE Vulnerabilities Resolution Report
* Peer Review


===2.3 Seismic===
              .1    iENGINEERING                              REPORT NO. EA12-021 NI ENERCON
Walkdown 2.0 SEISMIC LICENSING BASIS  
                          .. ' .. .                REVISION 1            PAGE 7 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 2.0 SEISMIC LICENSING BASIS  


==SUMMARY==
==SUMMARY==
2.1 SAFE SHUTDOWN EARTHQUAKE The Fort Calhoun Station is a pressurized water reactor (PWR) located on the west bank of the Missouri river, .approximately 19.4 miles north of Omaha, Nebraska.
The plant site is underlain by 65 to 75 feet of unconsolidated alluvial and glacial deposits, largely loose to moderately compact silty sand, and denser sands and gravels resting on sedimentary rock. The plant buildings are supported by a system of pipe piles driven to bedrock. The soil around the piles under Seismic Category I structures was compacted by vibroflotation to prevent liquefaction under Maximum Hypothetical Earthquake (Safe Shutdown Earthquake) loading.The foundation mat for the Containment and Auxiliary buildings is an integral unit supported on piles. The Intake Structure and Turbine Building are on separate foundations, each supported on piles. The plant grade elevation is 1004 feet.The primary sources of the plant's seismic licensing basis information are the Updated Safety Analysis Report (USAR), Appendix F (Reference
[10.3]), and the Plant Level Design Basis Document (PLDBD), PLDBD-CS-51 (Reference
[10.4]). The USAR describes the Design Earthquake (DE), also referred to as Operating Basis Earthquake (OBE), and the Maximum Hypothetical Earthquake (MHE), also referred to as Safe Shutdown Earthquake (SSE) and Design Basis Earthquake (DBE).FCNS was licensed in accordance with the draft criteria set forth in the 70 General Design Criteria for Nuclear Power Plant Construction, published for comment in the Federal Register (32 FR 10213) on July 11,1967.The Safe Shutdown Earthquake (SSE) for the site is 0.17g acting in the horizontal direction and two-thirds of 0.17g acting in the vertical direction simultaneously, in combination with the primary steady state stresses.
Total stresses are limited so that
_405,0RCONENGINEERING REPORT NO. EA12-021 U ENERCON REVISION I PAGE 8 OF 42 Fukushima Near-Term Task Force Recommendation
===2.3 Seismic===
Walkdown the function of Class 1 SSC's is not impaired in a manner that would prevent a safe and orderly shutdown of the plant.The ground response spectrum of the SSE (MHE) is shown in Figure 1. The spectrum conforms to the average spectra developed by Housner (Reference
[10.11]) for frequencies higher than about 0.33 Hz. The spectra for frequencies lower than about 0.33 Hz were prepared utilizing data presented by Newmark (Reference
[10.12]).The damping factors (percent of critical) that were used in the design of SSC's range from 0.5% for vital piping systems to 7% for framed concrete structures.
Damping ratio for bolted steel assemblies and for concrete structures supporting the reactor vessel or steam generator was 2%.
S E N E R CO N ,ENGINEERING REPORT NO. EA12-021 m N r Ts FREVISION 1 PAGE 9 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
2.1 SAFE SHUTDOWN EARTHQUAKE The Fort Calhoun Station is a pressurized water reactor (PWR) located on the west bank of the Missouri river, .approximately 19.4 miles north of Omaha, Nebraska. The plant site is underlain by 65 to 75 feet of unconsolidated alluvial and glacial deposits, largely loose to moderately compact silty sand, and denser sands and gravels resting on sedimentary rock. The plant buildings are supported by a system of pipe piles driven to bedrock. The soil around the piles under Seismic Category I structures was compacted by vibroflotation to prevent liquefaction under Maximum Hypothetical Earthquake (Safe Shutdown Earthquake) loading.
Walkdown_ Z~FYK ,rU~ it.7r<7'~~ ,7"ra ~ 1-1 4--~jvj 361WO M -31A ,QA N? W TI, FPO UM= STrO= -UU NO 1 36759 RESPONSE SPECTRA FIG F-2 MAXIMUM HYPOTHETICAL EARTHQUAKE Figure 1 ENGINEERING REPORT NO. EAI2-021 N'ENERCON 1 PAGE 10 OF 42 01 W -fft D I I I Fukushima Near-Term Task Force Recommendation
The foundation mat for the Containment and Auxiliary buildings is an integral unit supported on piles. The Intake Structure and Turbine Building are on separate foundations, each supported on piles. The plant grade elevation is 1004 feet.
The primary sources of the plant's seismic licensing basis information are the Updated Safety Analysis Report (USAR), Appendix F (Reference [10.3]), and the Plant Level Design Basis Document (PLDBD), PLDBD-CS-51 (Reference [10.4]). The USAR describes the Design Earthquake (DE), also referred to as Operating Basis Earthquake (OBE), and the Maximum Hypothetical Earthquake (MHE), also referred to as Safe Shutdown Earthquake (SSE) and Design Basis Earthquake (DBE).
FCNS was licensed in accordance with the draft criteria set forth in the 70 General Design Criteria for Nuclear Power Plant Construction, published for comment in the Federal Register (32 FR 10213) on July 11,1967.
The Safe Shutdown Earthquake (SSE) for the site is 0.17g acting in the horizontal direction and two-thirds of 0.17g acting in the vertical direction simultaneously, in combination with the primary steady state stresses. Total stresses are limited so that


===2.3 Seismic===
_405,0RCONENGINEERING                                      REPORT NO. EA12-021 U ENERCON 01-A**.'**e-;*):*.E./                            REVISION I           PAGE 8 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown the function of Class 1 SSC's is not impaired in a manner that would prevent a safe and orderly shutdown of the plant.
Walkdown 2.2 DESIGN CODES, STANDARDS, AND METHODS All Class I systems, structures and components (SSC's) at FCS have been designed to withstand stresses resulting from the response to the Design Earthquake (ground acceleration of 0.08g horizontal and two-thirds of 0.08g vertical, acting simultaneously), in combination with the primary steady-state stresses.
The ground response spectrum of the SSE (MHE) is shown in Figure 1. The spectrum conforms to the average spectra developed by Housner (Reference [10.11]) for frequencies higher than about 0.33 Hz. The spectra for frequencies lower than about 0.33 Hz were prepared utilizing data presented by Newmark (Reference [10.12]).
Total stresses are maintained within the allowable working stress limits accepted as good practice and, where applicable, set forth in the appropriate design standards, such as the ASME Boiler and Pressure Vessel Code, USAS B31.1 (1967), USAS B31.1 (1955) for Reactor Coolant loop piping, and B31.7 (1968) Codes for Pressure Piping, ACI 318-63 Building Code Requirements for Reinforced Concrete, and AISC Specification for the Design and Erection of Structural Steel for Buildings.
The damping factors (percent of critical) that were used in the design of SSC's range from 0.5% for vital piping systems to 7% for framed concrete structures. Damping ratio for bolted steel assemblies and for concrete structures supporting the reactor vessel or steam generator was 2%.
In addition, Class I SSC's have been designed such that seismic stresses resulting from the response to the Maximum Hypothetical Earthquake (ground acceleration of 0.17g horizontal and two-thirds of 0.17g vertical, acting simultaneously), in combination with the primary steady-state stresses, are limited so that the function of the SSC's is not impaired in a manner that would disrupt the safe and orderly shutdown of the plant. Seismic qualification of Class I electrical equipment conforms to IEEE 344-1975.
Components of the Reactor Protective System and the Engineered Safeguards Actuation System are qualified per IEEE 344-1971"Guide for Seismic Qualification of Class 1 E Electrical Equipment for Nuclear Power Generation Stations".
The general Method of analysis for Class 1 SSC's can be described as follows: " Determine the natural frequency of vibration of the structure or component* Select the appropriate Amplified Floor Response Spectrum (ARS, currently called In-Structure-Response-Spectrum, or ISRS) or Ground Spectrum, depending on support elevation and/or location
,E NERC0N ,ENGINEERING REPORT NO. EA12-021.
1 PAGE 11 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
S ENERCO N                                ,ENGINEERINGREPORT NO. EA12-021 m  N      r   Ts      FREVISION                        1          PAGE 9 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown
Walkdown* Select the appropriate damping ratio of component and, from the corresponding spectral curve and at the natural frequency of vibration of the component, read the response acceleration of the component* Stresses resulting from the combination of Design Earthquake acceleration and other applicable loads are checked against limits imposed by design standards* Responses resulting from the combination of Maximum Hypothetical Earthquake acceleration and other applicable loads are checked to ensure that stresses would not produce rupture and deflections would not prevent the functional performance of the component ENGINEERING REPORT No. EA12-021 ,, r REVISION I PAGE 12 OF 42 Fukushima Near-Term Task Force Recommendation  
_      Z~FYK                ,rU
                                    ~ it.7r
                                <7'~~                                    ,7 "ra ~ 1 4- -1
                                                                      -~jvj
                                    -31A 361WO    M N? W
                          ,QA            TI, FPO UM=  STrO=-UU NO1          36759 RESPONSE SPECTRA MAXIMUM HYPOTHETICAL EARTHQUAKE FIG F-2 Figure 1


===2.3 Seismic===
ENGINEERING REPORT NO. EAI2-021 N'ENERCON
Walkdown 3.0 Seismic Walk-down Program Implementation Approach OPPD has committed to conduct and document seismic walkdowns for resolution of NTTF Recommendation 2.3: Seismic, in accordance with the EPRI Guidance.
                * =*** *, *,.::*-*;*j*;:.'0*:j01REVISION    1          PAGE 10 OF 42 01 W-fft D    I                            I                    I Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 2.2 DESIGN CODES, STANDARDS, AND METHODS All Class I systems, structures and components (SSC's) at FCS have been designed to withstand stresses resulting from the response to the Design Earthquake (ground acceleration of 0.08g horizontal and two-thirds of 0.08g vertical, acting simultaneously),
OPPD contracted with ENERCON Services, Inc., for supplementary engineering and management resources.
in combination with the primary steady-state stresses. Total stresses are maintained within the allowable working stress limits accepted as good practice and, where applicable, set forth in the appropriate design standards, such as the ASME Boiler and Pressure Vessel Code, USAS B31.1 (1967), USAS B31.1 (1955) for Reactor Coolant loop piping, and B31.7 (1968) Codes for Pressure Piping, ACI 318-63 Building Code Requirements for Reinforced Concrete, and AISC Specification for the Design and Erection of Structural Steel for Buildings. In addition, Class I SSC's have been designed such that seismic stresses resulting from the response to the Maximum Hypothetical Earthquake (ground acceleration of 0.17g horizontal and two-thirds of 0.17g vertical, acting simultaneously), in combination with the primary steady-state stresses, are limited so that the function of the SSC's is not impaired in a manner that would disrupt the safe and orderly shutdown of the plant. Seismic qualification of Class I electrical equipment conforms to IEEE 344-1975. Components of the Reactor Protective System and the Engineered Safeguards Actuation System are qualified per IEEE 344-1971 "Guide for Seismic Qualification of Class 1E Electrical Equipment for Nuclear Power Generation Stations".
A team of individuals, Mr. Marvin Morris and Mr. Steve Skubey, equipped with knowledge of plant systems and components, were selected to develop the Seismic Walkdown Equipment List (SWEL). Two SWELs were developed:
The general Method of analysis for Class 1 SSC's can be described as follows:
SWEL 1 and SWEL 2.SWEL 1 consists of a sample of equipment related to safe shutdown of the reactor and maintaining containment integrity; SWEL 2 consists of items related to the Spent Fuel Pool, as described in the EPRI Guidance.Personnel responsible for performing the walkdowns and AWCs successfully completed training for the NTTF Recommendation 2.3: Seismic. The Seismic Walkdown Engineers who are certified by SQUG were not required to complete the NTTF training, but were trained on the differences between the USI A-46 and NTTF 2.3: Seismic programs.
    " Determine the natural frequency of vibration of the structure or component
The team of Seismic Walkdown Engineers (SWEs) who performed the walkdowns were Mr.Kevin Bessell, Mr. Alex Smerch, and Mr. John Kao. The majority of the walkdowns were performed by Mr. Smerch and Mr. Kao. Mr. Bessell took over the role left vacant by Mr. Kao to complete the remaining walkdowns with Mr. Smerch. Plant personnel, namely Russ Placke, Ashwin Patel and Jim Carlson, also assisted in performing walkdowns.
* Select the appropriate Amplified Floor Response Spectrum (ARS, currently called In-Structure-Response-Spectrum, or ISRS) or Ground Spectrum, depending on support elevation and/or location
All SWEs have some if not extensive experience in seismic design and qualification of nuclear power plant SSC's. It was considered important to the project to ensure that any given walkdown team would be comprised with an experienced seismic engineer and one less experienced engineer.
Qualifications of the seismic walkdown team members are provided in Section 4.0.
OENGINEERING REPORT No. EA 2-021.... .. .. I -, Ew doi REVISION I PAGE 13 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
                  ,E  NERC0N                                REPORT NO.
Walkdown Seismic Walkdown Checklists (SWC's) and Area Walk-by Checklists (AWC's) were prepared in advance of the walkdowns.
                                                    ,ENGINEERING        EA12-021
Packages were assembled into folders that included related information, such as location of equipment, anchorage drawings, in-structure response spectra information, calculations, and previously performed qualifications under earlier programs (refer to Section 5.0), if available.
          * . *,     *,*'.,*:*,,jp:;.**.r*a/REVISION    1           PAGE 11 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown
Walkdowns were performed for all accessible components on the combined SWEL (SWEL 1 + SWEL 2). During the walkdowns, SWC's were completed for each component on the SWEL, and AWC's were completed for each area within an approximate 35 foot radius of the component.
* Select the appropriate damping ratio of component and, from the corresponding spectral curve and at the natural frequency of vibration of the component, read the response acceleration of the component
Walkdowns were tracked by component number and AWC's by location.
* Stresses resulting from the combination of Design Earthquake acceleration and other applicable loads are checked against limits imposed by design standards
Details of the SWC's and AWC's are provided in Section 7.0.The SWCs and AWCs were given one of three status marks "Y" for Yes (walkdown is completed), "N" for No (walkdown has not been performed), or "U" for Uncertain (walkdown has been performed however more information is required and item has been deferred).
* Responses resulting from the combination of Maximum Hypothetical Earthquake acceleration and other applicable loads are checked to ensure that stresses would not produce rupture and deflections would not prevent the functional performance of the component
When feasible, inaccessible items were replaced by alternate, accessible items, and the SWEL was revised accordingly.
Such changes were reviewed by the SWEs, Equipment Selection Personnel and the Peer Review team.Potentially adverse seismic conditions that were identified in the walkdowns were either evaluated under a Licensing Basis Evaluation or entered directly into the plant's corrective action program (CAP) for further evaluation.
A summary of the potentially adverse seismic conditions is provided in Attachment 11.4.A Peer Review was conducted for each activity, including this submittal report. The Peer review activity is described in detail in Section 9.0. Qualifications of the Peer Review team are provided in Section 4.0.
40&#xfd;0"ENGINEERING REPORT No. EA12-021 U ENERCONo REVISION E PAGE 14 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
ENGINEERING REPORT  No. EA12-021
Walkdown 4.0 Personnel Qualifications Qualifications and experiences of personnel participating in the NTTF Seismic Walkdown effort are provided in this section. Training certificates for the SWEs are provided in Attachment 11.8.Name of Equipment Plant Seismic Licensing IPEEE Peer Personnel Selection Operations Walkdown Basis Reviewer Reviewer Marvin X X Morris Steve X Skubey Kevin X X X (LBE)Bessell Alex X Smerch John Kao X Don Pier X X (SWEL)Ashwin X X (SWD, Patel SWEL)Ryan X Rymarczyk David X X (SWD)Haas Russell X Placke Laura X X Maclay Jim X X Carlson Table 1 -Personnel Function
                            ,,      r            REVISION I            PAGE 12 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 3.0 Seismic Walk-down Program Implementation Approach OPPD has committed to conduct and document seismic walkdowns for resolution of NTTF Recommendation 2.3: Seismic, in accordance with the EPRI Guidance. OPPD contracted with ENERCON Services, Inc., for supplementary engineering and management resources.
__NERrN ENGINEERING REPORT NO. EA12-021 U ENERCON".. ... -,. .REVISION I PAGE 15 OF 42 Fukushima Near-Term Task Force Recommendation
A team of individuals, Mr. Marvin Morris and Mr. Steve Skubey, equipped with knowledge of plant systems and components, were selected to develop the Seismic Walkdown Equipment List (SWEL). Two SWELs were developed: SWEL 1 and SWEL 2.
SWEL 1 consists of a sample of equipment related to safe shutdown of the reactor and maintaining containment integrity; SWEL 2 consists of items related to the Spent Fuel Pool, as described in the EPRI Guidance.
Personnel responsible for performing the walkdowns and AWCs successfully completed training for the NTTF Recommendation 2.3: Seismic. The Seismic Walkdown Engineers who are certified by SQUG were not required to complete the NTTF training, but were trained on the differences between the USI A-46 and NTTF 2.3: Seismic programs. The team of Seismic Walkdown Engineers (SWEs) who performed the walkdowns were Mr.
Kevin Bessell, Mr. Alex Smerch, and Mr. John Kao. The majority of the walkdowns were performed by Mr. Smerch and Mr. Kao. Mr. Bessell took over the role left vacant by Mr. Kao to complete the remaining walkdowns with Mr. Smerch. Plant personnel, namely Russ Placke, Ashwin Patel and Jim Carlson, also assisted in performing walkdowns. All SWEs have some if not extensive experience in seismic design and qualification of nuclear power plant SSC's. It was considered important to the project to ensure that any given walkdown team would be comprised with an experienced seismic engineer and one less experienced engineer. Qualifications of the seismic walkdown team members are provided in Section 4.0.


===2.3 Seismic===
OENGINEERING                REPORT No. EA 2-021
Walkdown 4.1 SEISMIC WALK-DOWN TEAM" Marvin Morris B.S. Mathematics, University of Texas, Pan American, 1968 M.S. Physics, Sam Houston State University, 1974 Mr. Marvin Morris is the Supervisor of Safety Analysis in ENERCON's NYSIS Division.
....   .. .. I            -,   Ew doi          REVISION I            PAGE 13 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Seismic Walkdown Checklists (SWC's) and Area Walk-by Checklists (AWC's) were prepared in advance of the walkdowns. Packages were assembled into folders that included related information, such as location of equipment, anchorage drawings, in-structure response spectra information, calculations, and previously performed qualifications under earlier programs (refer to Section 5.0), if available.
Mr. Morris has over 30 years of experience in the nuclear industry in areas of design, analysis, licensing and operations support. His more recent experience has been involved with the development of Combined License (COL) applications for Bellefonte, Grand Gulf Nuclear Station, William States Lee and Comanche Peak Nuclear Power Plant new plant projects.* John Kao, S.E., P.E.B.S. Civil Engineering, University of Illinois at Urbana-Champaign, 1976 M.S. Civil Engineering, University of Illinois at Urbana-Champaign, 1977 MBA Illinois State University, 2003 Mr. John Kao is a Civil/Structural Engineer, sub-contracted by ENERCON, with over 34 years of work experience, the majority of which has been in nuclear.John has expertise in diverse areas of structural analysis and design, as well as some areas of civil engineering.
Walkdowns were performed for all accessible components on the combined SWEL (SWEL 1 + SWEL 2). During the walkdowns, SWC's were completed for each component on the SWEL, and AWC's were completed for each area within an approximate 35 foot radius of the component. Walkdowns were tracked by component number and AWC's by location. Details of the SWC's and AWC's are provided in Section 7.0.
Over the past 9 years at a utility company, Mr.Kao has served as a manager for small transmission and substation projects as well as performed the engineering for these projects.
The SWCs and AWCs were given one of three status marks "Y" for Yes (walkdown is completed), "N" for No (walkdown has not been performed), or "U" for Uncertain (walkdown has been performed however more information is required and item has been deferred). When feasible, inaccessible items were replaced by alternate, accessible items, and the SWEL was revised accordingly. Such changes were reviewed by the SWEs, Equipment Selection Personnel and the Peer Review team.
John has been the lead structural engineer for a leading consulting firm in the power industry and was responsible for the analysis and design of structural steel structures, pipe supports, writing design criteria and coordinating field work. Mr. Kao is an EPRI trained SQUG Seismic Capability Engineer.
Potentially adverse seismic conditions that were identified in the walkdowns were either evaluated under a Licensing Basis Evaluation or entered directly into the plant's corrective action program (CAP) for further evaluation. A summary of the potentially adverse seismic conditions is provided in Attachment 11.4.
He is a licensed structural engineer and professional engineer in the state of Illinois.
A Peer Review was conducted for each activity, including this submittal report. The Peer review activity is described in detail in Section 9.0. Qualifications of the Peer Review team are provided in Section 4.0.
ENGINEERING REPORT NO. EA12-021~ 2 ~ENERCON 5.. 4...7 '- 4 REVISION 1 PAGE 16 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
REPORT    No. EA12-021 U ENERCON 40&#xfd;0"ENGINEERING E o E,*P,*-*          REVISION                PAGE 14 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 4.0 Personnel Qualifications Qualifications and experiences of personnel participating in the NTTF Seismic Walkdown effort are provided in this section. Training certificates for the SWEs are provided in Attachment 11.8.
Walkdown" Kevin Bessell, S.E., P.E.B.S. Civil Engineering, University of Illinois at Urbana-Champaign, 2000 Mr. Kevin Bessell is the Lead Civil/Structural Engineer in ENERCON's Naperville, Illinois office. He has over 12 years of experience, of which 4 years are in the nuclear industry.
Name of     Equipment      Plant        Seismic    Licensing      IPEEE        Peer Personnel    Selection  Operations    Walkdown      Basis      Reviewer    Reviewer Marvin          X                                                    X Morris Steve          X Skubey Kevin                                    X            X                    X (LBE)
Mr. Bessell recently completed the seismic analysis of the Fuel Handling Building at Zion Nuclear Power Station in support of the upgrade of the overhead bridge crane. In addition, he provided oversight for the cask set down safe load path evaluations and stack-up seismic restraint design. Mr. Bessell has experience in linear time history and response spectrum dynamic analyses as well as equivalent static method analysis of decoupled subsystems.
Bessell Alex                                    X Smerch John Kao                                    X Don Pier                    X                                              X (SWEL)
Mr. Bessell is an EPRI trained Fukushima NTTF Recommendation
Ashwin                                    X                                  X (SWD, Patel                                                                        SWEL)
Ryan                                                  X Rymarczyk David                      X                                                X (SWD)
Haas Russell                                    X Placke Laura                                                  X                        X Maclay Jim                                    X                                      X Carlson Table 1 - Personnel Function


===2.3 Seismic===
__NERrN                                      ENGINEERING REPORT NO. EA12-021 U ENERCON      .                REVISION  I          PAGE 15 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 4.1 SEISMIC WALK-DOWN TEAM
Walkdown Engineer and has trained over 30 individuals.
    "    Marvin Morris B.S. Mathematics, University of Texas, Pan American, 1968 M.S. Physics, Sam Houston State University, 1974 Mr. Marvin Morris is the Supervisor of Safety Analysis in ENERCON's NYSIS Division. Mr. Morris has over 30 years of experience in the nuclear industry in areas of design, analysis, licensing and operations support. His more recent experience has been involved with the development of Combined License (COL) applications for Bellefonte, Grand Gulf Nuclear Station, William States Lee and Comanche Peak Nuclear Power Plant new plant projects.
He is a licensed structural engineer in the state of Illinois and a licensed professional engineer in the state of Illinois and Wisconsin.
* John Kao, S.E., P.E.
* Alex Smerch B.S. Civil Engineering, Marquette University, Milwaukee, WI, 2008 Mr. Alex Smerch is a Civil/Structural Engineer in ENERCON's Naperville, Illinois office and is the lead Seismic Walkdown engineer for the project. He has over 3 years of experience performing structural analysis and design in the power and industrial industries.
B.S. Civil Engineering, University of Illinois at Urbana-Champaign,1976 M.S. Civil Engineering, University of Illinois at Urbana-Champaign,1977 MBA Illinois State University, 2003 Mr. John Kao is a Civil/Structural Engineer, sub-contracted by ENERCON, with over 34 years of work experience, the majority of which has been in nuclear.
His experience includes developing and analyzing finite element models using a variety of software to aid the design of numerous structural components and systems. He is experienced in preparing design calculations and analysis of concrete and steel structures, conducting dynamic analyses of structures to resist seismic and hydrodynamic loads, designing various structural support systems to comply with regulations and restrictions at nuclear facilities, and performing computer programming to post-process and expedite the analysis results from software based design aids. Mr.
John has expertise in diverse areas of structural analysis and design, as well as some areas of civil engineering. Over the past 9 years at a utility company, Mr.
4 0 ENERCNENGINEERING REPORT NO. EA12-021 E ~N ENER CONREOT ....
Kao has served as a manager for small transmission and substation projects as well as performed the engineering for these projects. John has been the lead structural engineer for a leading consulting firm in the power industry and was responsible for the analysis and design of structural steel structures, pipe supports, writing design criteria and coordinating field work. Mr. Kao is an EPRI trained SQUG Seismic Capability Engineer. He is a licensed structural engineer and professional engineer in the state of Illinois.
I PAGE 17 OF 42 O ift"Pwi I II Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
ENGINEERING REPORT NO. EA12-021 5.. 4...7
Walkdown Smerch is an EPRI trained Fukushima NTTF Recommendation  
        ~    2      ~ENERCON 4              '-                      REVISION 1          PAGE 16 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown
  "      Kevin Bessell, S.E., P.E.
B.S. Civil Engineering, University of Illinois at Urbana-Champaign,2000 Mr. Kevin Bessell is the Lead Civil/Structural Engineer in ENERCON's Naperville, Illinois office. He has over 12 years of experience, of which 4 years are in the nuclear industry. Mr. Bessell recently completed the seismic analysis of the Fuel Handling Building at Zion Nuclear Power Station in support of the upgrade of the overhead bridge crane. In addition, he provided oversight for the cask set down safe load path evaluations and stack-up seismic restraint design. Mr. Bessell has experience in linear time history and response spectrum dynamic analyses as well as equivalent static method analysis of decoupled subsystems. Mr. Bessell is an EPRI trained Fukushima NTTF Recommendation 2.3 Seismic Walkdown Engineer and has trained over 30 individuals. He is a licensed structural engineer in the state of Illinois and a licensed professional engineer in the state of Illinois and Wisconsin.
* Alex Smerch B.S. Civil Engineering, Marquette University, Milwaukee, WI, 2008 Mr. Alex Smerch is a Civil/Structural Engineer in ENERCON's Naperville, Illinois office and is the lead Seismic Walkdown engineer for the project. He has over 3 years of experience performing structural analysis and design in the power and industrial industries. His experience includes developing and analyzing finite element models using a variety of software to aid the design of numerous structural components and systems. He is experienced in preparing design calculations and analysis of concrete and steel structures, conducting dynamic analyses of structures to resist seismic and hydrodynamic loads, designing various structural support systems to comply with regulations and restrictions at nuclear facilities, and performing computer programming to post-process and expedite the analysis results from software based design aids. Mr.


===2.3 Seismic===
4 0 E ~N ENER CONREOT ENERCNENGINEERING                    REPORT NO.. EA12-021
Walkdown Engineer and has trained over 15 individuals." Steve Skubey B.S. Civil Engineering, University of Tennessee, Knoxville, TN Mr. Steve Skubey is a Civil/Structural Engineer in ENERCON's Overland Park, Kansas office. He has over 4 years of experience in the nuclear industry.
          !*,*!**i
He has been involved with the TVA Watts Bar Nuclear Unit 2 completion as an employee with Bechtel Power Corporation.
            .        ..  *:.,c.-*,p**-*/*REVISION        I            PAGE 17 OF 42 Oift"Pwi        I                          II Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Smerch is an EPRI trained Fukushima NTTF Recommendation 2.3 Seismic Walkdown Engineer and has trained over 15 individuals.
His primary role was a pipe support design engineer performing design analyses, material testing and hazard evaluations.
"   Steve Skubey B.S. Civil Engineering, University of Tennessee, Knoxville, TN Mr. Steve Skubey is a Civil/Structural Engineer in ENERCON's Overland Park, Kansas office. He has over 4 years of experience in the nuclear industry. He has been involved with the TVA Watts Bar Nuclear Unit 2 completion as an employee with Bechtel Power Corporation. His primary role was a pipe support design engineer performing design analyses, material testing and hazard evaluations.
* Ryan Rymarczyk B.S., Nuclear Engineering, University of Illinois Urbana-Champaign, 2007 Mr. Ryan Rymarczyk is a Nuclear Engineer in ENERCON's Naperville, Illinois office. In this position, he has performed various mechanical analyses and design for commercial nuclear power plants including River Bend, Perry, Point Beach, St. Lucie and Palisades Nuclear Stations.
* Ryan Rymarczyk B.S., Nuclear Engineering,University of Illinois Urbana-Champaign,2007 Mr. Ryan Rymarczyk is a Nuclear Engineer in ENERCON's Naperville, Illinois office. In this position, he has performed various mechanical analyses and design for commercial nuclear power plants including River Bend, Perry, Point Beach, St. Lucie and Palisades Nuclear Stations. Mr. Rymarczyk was also involved in developing an economic feasibility study for a next-generation mid-western nuclear power station.
Mr. Rymarczyk was also involved in developing an economic feasibility study for a next-generation mid-western nuclear power station." David Haas B.S. Engineering Technology, University of Nebraska, 1977 Mr. David Haas has over 33 years of experience as a former senior mechanical design engineer in the Design Engineering Group at OPPD; 22 years of nuclear experience at Fort Calhoun Station; performed walkdowns for concrete anchor inspection and anchor pull-testing for the NRC I&E Bulletin 79-02 in the late 70's and early 80's; also performed pipe support walkdowns for related I&E Bulletin 79-14; wrote specifications, installation and repair procedures, 4050140ENGINEERING REPORT No. EAI 2-021.... ....
  "   David Haas B.S. Engineering Technology, University of Nebraska, 1977 Mr. David Haas has over 33 years of experience as a former senior mechanical design engineer in the Design Engineering Group at OPPD; 22 years of nuclear experience at Fort Calhoun Station; performed walkdowns for concrete anchor inspection and anchor pull-testing for the NRC I&E Bulletin 79-02 in the late 70's and early 80's; also performed pipe support walkdowns for related I&E Bulletin 79-14; wrote specifications, installation and repair procedures,
* EENERCON E -2 ikrO' ,'-6E ..ERCN REVISION 1 PAGE 18 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
    .... ....*4050140ENGINEERING EENERCON                                  REPORT    E      -2 No. EAI 2-021 ikrO'                      ERCN
Walkdown performed ASME code reconciliations, qualified various welding procedures and served as alternate welding engineer." Ashwin Patel B.S. Mechanical Engineering, University of Idaho B.S. Electrical Engineering, University of Idaho Mr. Patel is a senior engineer at OPPD. He has performed stress analyses and equipment qualifications of various power plant components based on SQUG methodology at General Electric, Union Carbide (Reprocessing Nuclear Fuel)and TVA; performed testing of equipment, seismic test reports, prepared modifications, evaluated relays and quality relays at OPPD. He holds the following certifications:
                        ,'-6E  ..              REVISION  1          PAGE 18 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown performed ASME code reconciliations, qualified various welding procedures and served as alternate welding engineer.
SQUG Walkdown Engineer; SQUG NARE; SQUG Relay Evaluation.
  "   Ashwin Patel B.S. MechanicalEngineering, University of Idaho B.S. ElectricalEngineering, University of Idaho Mr. Patel is a senior engineer at OPPD. He has performed stress analyses and equipment qualifications of various power plant components based on SQUG methodology at General Electric, Union Carbide (Reprocessing Nuclear Fuel) and TVA; performed testing of equipment, seismic test reports, prepared modifications, evaluated relays and quality relays at OPPD. He holds the following certifications: SQUG Walkdown Engineer; SQUG NARE; SQUG Relay Evaluation.
* Don Pier B.S., Thomas Edison State University Mr. Pier is a licensed Senior Reactor Operator at Fort Calhoun Nuclear Station.He has been the project manager for the Steam Generator Replacement and Extended Power Uprate. He holds the following qualifications:
* Don Pier B.S., Thomas Edison State University Mr. Pier is a licensed Senior Reactor Operator at Fort Calhoun Nuclear Station.
Shift Manager;Control Room Supervisor; Shift Technical Advisor; Reactor Operator; Test Engineer." Russ Placke, P.E.B.S. Civil Engineering, University of Nebraska, Lincoln, 1995 Mr. Placke has over 17 years of experience as a Civil/Structural Design engineer.
He has been the project manager for the Steam Generator Replacement and Extended Power Uprate. He holds the following qualifications: Shift Manager; Control Room Supervisor; Shift Technical Advisor; Reactor Operator; Test Engineer.
Much of this experience has been in the power and industrial field in the design of steel and concrete structures such as buildings, pipe racks, pipe supports, building foundations and equipment foundations.
  "   Russ Placke, P.E.
A portion of this experience has been as a field engineer for the construction of (3) combined r y ENGINEERING REPORT NO. EA12-021~~DENERCON.
B.S. Civil Engineering, University of Nebraska, Lincoln, 1995 Mr. Placke has over 17 years of experience as a Civil/Structural Design engineer. Much of this experience has been in the power and industrial field in the design of steel and concrete structures such as buildings, pipe racks, pipe supports, building foundations and equipment foundations. A portion of this experience has been as a field engineer for the construction of (3) combined
I PAGE 19 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
ry                                        ENGINEERING REPORT NO. EA12-021
Walkdown cycle power plants where he was responsible for the resolution of structural issues encountered during the construction.
            ~~DENERCON      'jp*:o.r/4REVISION
The past two years have been as a design engineer -nuclear at OPPD's Fort Calhoun Power Station where he has been extensively involved in the plant recovery efforts such as the reconstitution of the containment internal structure design calculations.
        *' . :,*,*  * ,**:*.,                          I          PAGE 19 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown cycle power plants where he was responsible for the resolution of structural issues encountered during the construction. The past two years have been as a design engineer - nuclear at OPPD's Fort Calhoun Power Station where he has been extensively involved in the plant recovery efforts such as the reconstitution of the containment internal structure design calculations. Mr.
Mr.Placke has also completed OPPD's one year training program for design engineers and also the Seismic Qualification Utility Group (SQUG) training.Laura Maclay B.S. Structural Engineering, Drexel University Ms. Maclay has over five years of experience as a structural engineer, three years with Enercon Services and is a qualified Seismic Walkdown Engineer as stated on her EPRI training certificate dated July 26, 2012. Her tasks have ranged from assisting with the development and preparation of design change packages to performing design calculations and markups, comment resolutions, and drawing revisions.
Placke has also completed OPPD's one year training program for design engineers and also the Seismic Qualification Utility Group (SQUG) training.
Ms. Maclay spent a year on site at Turkey Point Nuclear Plant preparing structural evaluations of SSC's for an Extended Power Uprate (EPU). Her work included designing safety related supports for computer and electrical equipment for the Turbine Digital Controls Upgrade package and other similar packages.
Laura Maclay B.S. Structural Engineering,Drexel University Ms. Maclay has over five years of experience as a structural engineer, three years with Enercon Services and is a qualified Seismic Walkdown Engineer as stated on her EPRI training certificate dated July 26, 2012. Her tasks have ranged from assisting with the development and preparation of design change packages to performing design calculations and markups, comment resolutions, and drawing revisions. Ms. Maclay spent a year on site at Turkey Point Nuclear Plant preparing structural evaluations of SSC's for an Extended Power Uprate (EPU). Her work included designing safety related supports for computer and electrical equipment for the Turbine Digital Controls Upgrade package and other similar packages. Ms. Maclay's responsibilities also included the review of calculations, drawings and vendor documentation for the seismic evaluation of the Unit 3 Palfinger Crane inside containment and new platforms in the High Pressure Turbine enclosure.
Ms. Maclay's responsibilities also included the review of calculations, drawings and vendor documentation for the seismic evaluation of the Unit 3 Palfinger Crane inside containment and new platforms in the High Pressure Turbine enclosure.
Recent work includes Fukushima flooding walkdowns at Limerick Generating Station and seismic walkdowns at Plant Farley and Pilgrim Nuclear Generating Station. Ms. Maclay was the lead engineer for the Pilgrim seismic walkdowns, prepared the final report for issue to the NRC and was the reviewer for the final seismic report for Fitzpatrick.
Recent work includes Fukushima flooding walkdowns at Limerick Generating Station and seismic walkdowns at Plant Farley and Pilgrim Nuclear Generating Station. Ms. Maclay was the lead engineer for the Pilgrim seismic walkdowns, prepared the final report for issue to the NRC and was the reviewer for the final seismic report for Fitzpatrick.
I E'JEN E CONENGINEERING REPORT NO. EA12-021..... N ENERCON E -2 I PAGE 20 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
      .....        N ENERCON I E'JEN E CONENGINEERING                  REPORT NO.
Walkdown James Carlson B.S. Mechanical Engineering, North Dakota State University Mr. Carlson has over thirty years of experience in the HVAC industry.
E      -2 EA12-021
His expertise includes seismic restraint design of non-structural components for commercial and nuclear facilities.
            * =,*        Lc*.:*-*.t*::*.'*r*/REVISION    I            PAGE 20 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown James Carlson B.S. Mechanical Engineering, North Dakota State University Mr. Carlson has over thirty years of experience in the HVAC industry. His expertise includes seismic restraint design of non-structural components for commercial and nuclear facilities. James is a certified seismic evaluation engineer (SQUG), identified by the Department of Energy Professional Engineering. He is responsible for the original preparation of the ASHRAE Seismic Restraint Design chapter published in the 1991 Applications Handbook and recent revision and served as the Principle Investigator of the "Manuals for Seismic Installation of Electrical and Mechanical Equipment" project contracted with ASCE (
James is a certified seismic evaluation engineer (SQUG), identified by the Department of Energy Professional Engineering.
He is responsible for the original preparation of the ASHRAE Seismic Restraint Design chapter published in the 1991 Applications Handbook and recent revision and served as the Principle Investigator of the "Manuals for Seismic Installation of Electrical and Mechanical Equipment" project contracted with ASCE (


==Reference:==
==Reference:==
FEMA contract EMW-2001-CO-0379).
FEMA contract EMW-2001-CO-0379).
4.2 PEER REVIEW TEAM* Kevin Bessell (ENERCON)* Laura Maclay (ENERCON)* Don Pier (OPPD)* Ashwin Patel (OPPD Lead Peer Reviewer)* David Haas (OPPD)* Jim Carlson (OPPD) e-0 -ENGINEERING REPORT NO. EA12-021~~FE ENERCON REVISION I PAGE 21 OF 42 Fukushima Near-Term Task Force Recommendation
4.2 PEER REVIEW TEAM
* Kevin Bessell (ENERCON)
* Laura Maclay (ENERCON)
* Don Pier (OPPD)
* Ashwin Patel (OPPD Lead Peer Reviewer)
* David Haas (OPPD)
* Jim Carlson (OPPD)


===2.3 Seismic===
e-0      -                                    ENGINEERING REPORT NO. EA12-021
Walkdown 5.0 IPEEE Vulnerabilities Reporting During the IPEEE program in response to NRC Generic Letter 88-20 (Reference  
                ~~FE    ENERCON                    REVISION I            PAGE 21 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 5.0 IPEEE Vulnerabilities Reporting During the IPEEE program in response to NRC Generic Letter 88-20 (Reference [10.5]),
[10.5]), plant-specific seismic vulnerabilities were identified at many plants. In this context,"vulnerabilities" refers to conditions found during the IPEEE program related to seismic anomalies, outliers, or other findings.IPEEE Reviewers (see Section 4.0) reviewed the IPEEE Report (Reference  
plant-specific seismic vulnerabilities were identified at many plants. In this context, "vulnerabilities" refers to conditions found during the IPEEE program related to seismic anomalies, outliers, or other findings.
[10.25])and supporting documentation to identify items determined to present a seismic vulnerability by the IPEEE program. IPEEE Reviewers then reviewed additional plant documentation to identify the eventual resolutions to those seismic vulnerabilities not resolved by the completion of the IPEEE program.During the 1980's, the NRC initiated an Unresolved Safety Issue (USI) A-46 under Generic Letter No. 87-02 (Reference  
IPEEE Reviewers (see Section 4.0) reviewed the IPEEE Report (Reference [10.25])
[10.6]), to review the seismic adequacy of equipment in certain operating nuclear power plants with respect to seismic criteria not in use at the time when these plants were licensed.
and supporting documentation to identify items determined to present a seismic vulnerability by the IPEEE program. IPEEE Reviewers then reviewed additional plant documentation to identify the eventual resolutions to those seismic vulnerabilities not resolved by the completion of the IPEEE program.
FCNS was identified as one of the A-46 plants which must be reviewed.
During the 1980's, the NRC initiated an Unresolved Safety Issue (USI) A-46 under Generic Letter No. 87-02 (Reference [10.6]), to review the seismic adequacy of equipment in certain operating nuclear power plants with respect to seismic criteria not in use at the time when these plants were licensed. FCNS was identified as one of the A-46 plants which must be reviewed. The vulnerabilities that were then identified under the IPEEE program were also incorporated as outliers under the USI A-46 program.
The vulnerabilities that were then identified under the IPEEE program were also incorporated as outliers under the USI A-46 program.OPPD joined the Seismic Qualification Utility Group (SQUG) which published the Generic Implementation Procedure, Revision 2 (GIP-2) (Reference  
OPPD joined the Seismic Qualification Utility Group (SQUG) which published the Generic Implementation Procedure, Revision 2 (GIP-2) (Reference [10.17]) for evaluating these plants and equipment. The NRC accepted the SQUG procedure for resolving USI A-46 in Supplementary Safety Evaluation Report No.2 (SSER No.2)
[10.17]) for evaluating these plants and equipment.
(Reference [10.18]). OPPD used GIP-2 in its entirety, including the clarifications, interpretations and exceptions identified in SSER No.2, as clarified by the August 21, 1992 SQUG letter (Reference [2.19]), to evaluate the seismic adequacy of selected safe shutdown equipment in the Fort Calhoun Station (Reference [2.20]).
The NRC accepted the SQUG procedure for resolving USI A-46 in Supplementary Safety Evaluation Report No.2 (SSER No.2)(Reference  
[10.18]).
OPPD used GIP-2 in its entirety, including the clarifications, interpretations and exceptions identified in SSER No.2, as clarified by the August 21, 1992 SQUG letter (Reference  
[2.19]), to evaluate the seismic adequacy of selected safe shutdown equipment in the Fort Calhoun Station (Reference  
[2.20]).
ENGINEERING REPORT NO. EA12-021...... EENERCON-',, -,.' I--
REVISION 17 PAGE 22 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
ENGINEERING REPORT NO. EA12-021
Walkdown The NRC issued a Safety Evaluation Report to OPPD on July 30, 1998, which accepted the results of the USI A-46 program for FCNS, including the approach used to resolve all outliers and vulnerabilities (Reference  
  - -,.' I--
[2.21]).As discussed in the letter in the following figure, there are no IPEEE vulnerabilities to report, because all "outliers" have been resolved and incorporated into the plant design (see Figure 2 below for closeout of USI A-46, TAC No. M69447).
EENERCON      ,__;*.r/o          REVISION 17        PAGE 22 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown The NRC issued a Safety Evaluation Report to OPPD on July 30, 1998, which accepted the results of the USI A-46 program for FCNS, including the approach used to resolve all outliers and vulnerabilities (Reference [2.21]).
jj~ ir IE~ N ERCONENGINEERING REPORT No. EAI 2-021 E;F3 ENERCON-~ -~ -EVIIION I -AGE, G 23 OF 42 Fukushima Near-Term Task Force Recommendation
As discussed in the letter in the following figure, there are no IPEEE vulnerabilities to report, because all "outliers" have been resolved and incorporated into the plant design (see Figure 2 below for closeout of USI A-46, TAC No. M69447).


===2.3 Seismic===
jj~IE~
Walkdown REWT) AUG 41i998 UNI1TED STATUSNkc-9?-I
E;F3 ENERCON ir      NERCONENGINEERING                                        REPORT      No. EAI 2-021
.2 NUCLEAR REGULATORY COMMISSION C ~WASHIINGTON, 01C. 2CBSCOW1 July 30. 199$Mr. 6 K. Gambhir POSMCN =EQUUaED Division Manager -Engineering  
  -~    -~  -EVIIION                      -AGE,                                        I                      G  23 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown REWT) AUG       41i998 UNI1TED STATUSNkc-9?-I
& Operations Support PER 10 CPR 19.]!, 214 or 50.7 Omaha Pubic Power DLstrict Fr. Calhoun Station FC-2-4 Adm. Y -__ ' c Post Office Box 399 Hwy. 16 -Norln of Fort Calhoun Z _W BY Fc'&#xb6; Calhoun, Nebraska 68023-0399 1
                      . 2               NUCLEAR REGULATORY COMMISSION C                 ~WASHIINGTON, 01C. 2CBSCOW1 July 30. 199$
Mr. 6 K. Gambhir                                                           POSMCN         =EQUUaED Division Manager - Engineering & Operations Support                     PER 10 CPR 19.]!, 214 or 50.7 Omaha Pubic Power DLstrict Fr. Calhoun Station FC-2-4 Adm.                                                 Y     -
__           'c Post Office Box 399 Hwy. 16 - Norln of Fort Calhoun                                   .REW*    Z         BY
_W 1
Fc'&#xb6; Calhoun, Nebraska 68023-0399


==SUBJECT:==
==SUBJECT:==
FORT CALHOUN STATION. UNIT NO. I -CLOSEOUT OF UNRESOLVED SAFETY ISSUE A-46 (TAC NO. M69447)
FORT CALHOUN STATION. UNIT NO. I - CLOSEOUT OF UNRESOLVED SAFETY ISSUE A-46 (TAC NO. M69447)
 
Dear Mr. Gambhir-Tlw slaf[ has reviewed Omaha Public Power District's (OPPD) respoise to Generic Letter (GU'.1 37-r)2 whitl, Pstahlished the USI A-46 program for the Fort Calhoun Station. Unit No. 1. The slatt conCludea tat your US? A-46 implementation program ias met the purpose arc intent of the criteria ina the Generic Implerner.tation Procedlure, Revision 2 -CGIP-2)and the staff's SupplemenlaW Safety Evoaluation Reporl No. 2 (SSER No. 2) for the resolution of USI A-46. Thc             -
==Dear Mr. Gambhir-Tlw slaf[ has reviewed Omaha Public Power District's (OPPD) respoise to Generic Letter (GU'.1 37-r)2 whitl,==
staff has determined that yoir corrective actions and comnleted physical rrodifications for             ,r resolution of outliers ,esulted in safety enhanczrrwnts. In certain aspects, that are beyond the origiial I censing       ,1308lF and as a rneult, provide sufficient. :ais to close the US] A-416 review at   V tho Facility. The stall concludes that yo.r Implemmntalion programto resoDIVe USI A-46 an the Facility nas odeqgLately addressed the purpose of the 10 CFR 50.64(fi reqUest Your aclIvItles related to the USI A-46 implementation are subject NoNRC irspectlon.
Pstahlished the USI A-46 program for the Fort Calhoun Station. Unit No. 1. The slatt conCludea tat your US? A-46 implementation program ias met the purpose arc intent of the criteria ina the Generic Implerner.tation Procedlure, Revision 2 -CGIP-2) and the staff's SupplemenlaW Safety Evoaluation Reporl No. 2 (SSER No. 2) for the resolution of USI A-46. Thc -staff has determined that yoir corrective actions and comnleted physical rrodifications for ,r resolution of outliers ,esulted in safety enhanczrrwnts.
Sincerely, L. Raynard Wharton, Projeot Manager Project Directorate IV-2 Division of Reaclrt Prujects - IIIVIV Office of Nuclear Reactor Regulti ion Docket No. 50-286
In certain aspects, that are beyond the origiial I censing ,1308lF and as a rneult, provide sufficient.  
:ais to close the US] A-416 review at V tho Facility.
The stall concludes that yo.r Implemmntalion programto resoDIVe USI A-46 an the Facility nas odeqgLately addressed the purpose of the 10 CFR 50.64(fi reqUest Your aclIvItles related to the USI A-46 implementation are subject No NRC irspectlon.
Sincerely, L. Raynard Wharton, Projeot Manager Project Directorate IV-2 Division of Reaclrt Prujects -IIIVIV Office of Nuclear Reactor Regulti ion Docket No. 50-286  


==Enclosure:==
==Enclosure:==
Sa'ety Evaluation c wiencls: See next page WGCates, DJucobberjer. Sk(:anibhi*.                RLPhivlps. JIVChase, MATesarr JMSolyniossy, lIL.Jw.ur,.kE. PJLourwbcxrry. R2We.tcutt. IL[tIli%. DRPodc.tI, MJiLucht. JWTIIts. BtHnansher, TCfwvEtthews. flFSpire,. JMKtIhr. DPGalIe, ltDe. ,rtin. JGKoppl*cr. JH..acKLnnori,.                        Taylur.
.,Ancjus,        TJPi-ni-sano, WI-IFujimoto. HFConwy,, FlLF COPY (Joazn Figure 2


Sa'ety Evaluation c wiencls: See next page WGCates, DJucobberjer.
ENGINEERING REPORT NO. EA12-021 N'...ENERCON
RLPhivlps.
                          .     **:**:'-*.*Tp*;*,1a*REVISION    1          PAGE 24 OF 42 0*A    crttfb"V      IIII Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 6.0 Seismic Walk-down Equipment List Development The process used to select the items to be included in the seismic walkdown equipment list (SWEL) is described in detail in the EPRI Guidance, Section 3: Selection of SSCs. In general, the Ft. Calhoun SWEL is comprised of two groups of items, one of which is a sample of components from the USI A-46 safe shutdown equipment list (SSEL), the Ft.
JIVChase, MATesarr JMSolyniossy, lIL.Jw.ur,.kE.
Calhoun IPEEE list, insights from the Ft. Calhoun PRA, and review of plant modifications completed since the USI A-46 report was completed (termed SWEL 1) and the other is a sample of components associated with the spent fuel pool (termed SWEL 2).
PJLourwbcxrry.
The equipment list used as a starting point for development of the SWEL 1 is the base list, or BL 1. The base list used at FCNS is the Safe Shutdown Equipment List (SSEL) that was developed to address the NRC Unresolved Safety Issue (USI) A-46, "Seismic Qualification of Equipment in Operating Plants" which employed the guidance provided in Revision 2 of the Generic Implementation Procedure (GIP) and NRC Supplemental Safety Evaluation Report No. 2. The SSEL was developed in the 1990's and, to ensure that the safe shutdown paths used as a basis for the list remained valid, a review of the Design Basis Documents (DBDs) for safe shutdown systems was performed to identify changes to the systems since the SSEL was developed. Any new or changed equipment was added to BL 1.
R2We.tcutt.
The selection of equipment for the seismic walkdown is based on the USI A-46 Safe Shutdown Equipment List from EA 96-017(Reference [2.26]) and the IPEEE Component List from the IPEEE Report (Reference [2.25]). Screening of these lists is based on the requirements provided in the EPRI Guidance. In accordance with the EPRI Guidance, Seismic Category I structures, containment penetrations, and Seismic Category I piping systems were not included in the SSC bucket from which the SWEL 1 components were selected. This selection process is intended to comply with the request in the NRC
IL[tIli%.
DRPodc.tI, MJiLucht.
JWTIIts. BtHnansher, TCfwvEtthews.
flFSpire,.
JMKtIhr. DPGalIe, ltDe. ,rtin.
JH..acKLnnori,.
Taylur..,Ancjus, TJPi-ni-sano, WI-IFujimoto.
HFConwy,, FlLF COPY (Joazn Figure 2 ENGINEERING REPORT NO. EA12-021 N' ENERCON.... ....
1 PAGE 24 OF 42 0*A crttfb"V IIII Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
      .....              ENERCON                ENGINEERING REPORT NO. EAI 2-021
Walkdown 6.0 Seismic Walk-down Equipment List Development The process used to select the items to be included in the seismic walkdown equipment list (SWEL) is described in detail in the EPRI Guidance, Section 3: Selection of SSCs. In general, the Ft. Calhoun SWEL is comprised of two groups of items, one of which is a sample of components from the USI A-46 safe shutdown equipment list (SSEL), the Ft.Calhoun IPEEE list, insights from the Ft. Calhoun PRA, and review of plant modifications completed since the USI A-46 report was completed (termed SWEL 1)and the other is a sample of components associated with the spent fuel pool (termed SWEL 2).The equipment list used as a starting point for development of the SWEL 1 is the base list, or BL 1. The base list used at FCNS is the Safe Shutdown Equipment List (SSEL)that was developed to address the NRC Unresolved Safety Issue (USI) A-46, "Seismic Qualification of Equipment in Operating Plants" which employed the guidance provided in Revision 2 of the Generic Implementation Procedure (GIP) and NRC Supplemental Safety Evaluation Report No. 2. The SSEL was developed in the 1990's and, to ensure that the safe shutdown paths used as a basis for the list remained valid, a review of the Design Basis Documents (DBDs) for safe shutdown systems was performed to identify changes to the systems since the SSEL was developed.
_      ,                  ,.-ENERCON            REVISION 1            PAGE 25 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 50.54(f) Letter (Reference [10.1]), under the "Requested Actions" section, to "verify current plant configuration with the current license basis."
Any new or changed equipment was added to BL 1.The selection of equipment for the seismic walkdown is based on the USI A-46 Safe Shutdown Equipment List from EA 96-017(Reference
6.1 SAMPLE OF REQUIRED ITEMS FOR THE FIVE SAFETY FUNCTIONS The selection of equipment for the seismic walkdown was based on the five safety functions identified in the EPRI Guidance:
[2.26]) and the IPEEE Component List from the IPEEE Report (Reference
: 1. Reactor reactivity control
[2.25]). Screening of these lists is based on the requirements provided in the EPRI Guidance.
: 2. Reactor coolant pressure control
In accordance with the EPRI Guidance, Seismic Category I structures, containment penetrations, and Seismic Category I piping systems were not included in the SSC bucket from which the SWEL 1 components were selected.
: 3. Reactor coolant inventory control
This selection process is intended to comply with the request in the NRC ENGINEERING REPORT NO. EAI 2-021.....ENERCON_ , ,.-ENERCON REVISION 1 PAGE 25 OF 42 Fukushima Near-Term Task Force Recommendation
: 4. Decay heat removal
: 5. Containment function The SWEL 1 was developed by applying the following five sample selection attributes, defined in the EPRI Guidance, Section 3, to BL 1. The method of application is summarized below for each attribute:
* A variety of types of systems Sample items are selected to represent a broad range of frontline and support systems included on the SSEL.
* Maior new and replacementequipment A review of the system DBDs was performed to identify major new or replacement equipment installed within the last 20 years. A sample of these items is included on SWEL 1.
    "      A variety of types of equipment At least one item from each of the classes of equipment listed in EPRI Guidance, Appendix B: Classes of Equipment was included in SWEL 1 to


===2.3 Seismic===
        ....                ENERCON                ENGINEERING REPORT NO. E    -2 EA12-021
Walkdown 50.54(f) Letter (Reference
  ........             E        C.-,a                REVISION 1           PAGE 26 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown provide a sample selection of a variety of equipment types. No items are specifically listed in the Ft. Calhoun SSEL for Classes 11, 12, and 13. For these three classes no items are included on SWEL 1.
[10.1]), under the "Requested Actions" section, to "verify current plant configuration with the current license basis." 6.1 SAMPLE OF REQUIRED ITEMS FOR THE FIVE SAFETY FUNCTIONS The selection of equipment for the seismic walkdown was based on the five safety functions identified in the EPRI Guidance: 1. Reactor reactivity control 2. Reactor coolant pressure control 3. Reactor coolant inventory control 4. Decay heat removal 5. Containment function The SWEL 1 was developed by applying the following five sample selection attributes, defined in the EPRI Guidance, Section 3, to BL 1. The method of application is summarized below for each attribute:
* A variety of environments Sample items were selected from different locations in the plant to include various environments (hot, cold, dry, wet) and inside and outside installations.
* A variety of types of systems Sample items are selected to represent a broad range of frontline and support systems included on the SSEL.* Maior new and replacement equipment A review of the system DBDs was performed to identify major new or replacement equipment installed within the last 20 years. A sample of these items is included on SWEL 1." A variety of types of equipment At least one item from each of the classes of equipment listed in EPRI Guidance, Appendix B: Classes of Equipment was included in SWEL 1 to ENGINEERING REPORT NO. EA12-021.... ENERCON E -2........ E C.-,a REVISION 1 PAGE 26 OF 42 Fukushima Near-Term Task Force Recommendation
* Equipment enhanced due to vulnerabilitiesidentified during the IPEEE program The IPEEE program documentation was reviewed to determine equipment that had been modified or otherwise enhanced to reduce IPEEE vulnerabilities. A sample of these items is included on SWEL 1.
An additional consideration for the development of SWEL 1 is the equipment availability for inspection due to protected train restrictions during plant operation. The SWEL 1 items were selected from a single train (train A, where possible) and the walkdowns were scheduled to be accomplished within a single week to ensure accessibility. To ensure that risk significant items were included, insights from the Ft. Calhoun Probabilistic Risk Assessment (PRA) were considered.
The Fort Calhoun Station Probabilistic Risk Assessment (PRA) model includes only simplified modeling of a potential seismic initiating event. The simplified seismic model is used to support plant configuration risk assessments. It is not equivalent to a seismic PRA, and does not meet Regulatory Guide 1.200 (Reference [2.27]) with respect to modeling of seismic events. The simplified seismic model is based on a hypothetical seismic event (nominally 0.1g) that is assumed to result in failure of selected equipment that is susceptible to failure at or near the assumed g-level. The model assumes that the seismic event results in unrecoverable loss of off-site power, failure of equipment in the Turbine Building (including Auxiliary Feedwater Pump FW-54), failure of the diesel-


===2.3 Seismic===
      ~F13 evIo-sNvEoCO ENERCON                  ENGINEERING REPORT  No. EA1 2-021
Walkdown provide a sample selection of a variety of equipment types. No items are specifically listed in the Ft. Calhoun SSEL for Classes 11, 12, and 13. For these three classes no items are included on SWEL 1.* A variety of environments Sample items were selected from different locations in the plant to include various environments (hot, cold, dry, wet) and inside and outside installations.
              ...  ..  . ....&#xa3;*E.=**-f,*;E~r*iREVISION      1           PAGE 27 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown driven fire pump in the Intake Structure and failure of all makeup sources to the Emergency Feedwater Storage Tank (EFWST) except Raw Water.
* Equipment enhanced due to vulnerabilities identified during the IPEEE program The IPEEE program documentation was reviewed to determine equipment that had been modified or otherwise enhanced to reduce IPEEE vulnerabilities.
Using the existing PRA model, a list of potential seismic event accident sequences (i.e.,
A sample of these items is included on SWEL 1.An additional consideration for the development of SWEL 1 is the equipment availability for inspection due to protected train restrictions during plant operation.
cut-sets) was generated. The list of importance measures for basic events appearing in the seismic event cut-sets were sorted based on the "Risk Achievement Worth, RAW" importance measure. The equipment with the highest importance according to this approach is listed below:
The SWEL 1 items were selected from a single train (train A, where possible) and the walkdowns were scheduled to be accomplished within a single week to ensure accessibility.
    "    Diesel Generators (including inlet/exhaust dampers and fuel oil transfer pumps)
To ensure that risk significant items were included, insights from the Ft. Calhoun Probabilistic Risk Assessment (PRA) were considered.
* Station Batteries
The Fort Calhoun Station Probabilistic Risk Assessment (PRA) model includes only simplified modeling of a potential seismic initiating event. The simplified seismic model is used to support plant configuration risk assessments.
* Various 4160V Breakers
It is not equivalent to a seismic PRA, and does not meet Regulatory Guide 1.200 (Reference
* Air-Operated Auxiliary Feedwater Valves
[2.27]) with respect to modeling of seismic events. The simplified seismic model is based on a hypothetical seismic event (nominally 0.1g) that is assumed to result in failure of selected equipment that is susceptible to failure at or near the assumed g-level. The model assumes that the seismic event results in unrecoverable loss of off-site power, failure of equipment in the Turbine Building (including Auxiliary Feedwater Pump FW-54), failure of the diesel-evI o-sNvEoCO ENGINEERING REPORT No. EA1 2-021~F13 ENERCON... .. .....
* 480V Buses
1 PAGE 27 OF 42 Fukushima Near-Term Task Force Recommendation
* Auxiliary Feedwater Pumps FW-10 & FW-6 (including associated equipment) 6.2 SPENT FUEL POOL (SFP) ITEMS A base list (BL 2) was developed by reviewing the spent fuel pool (SFP) cooling and inventory related systems for all safety-related, Seismic Category I equipment and reviewing the systems whose failure could result in rapid drain-down of the SFP to within 10' above the stored fuel. Rapid drain-down is defined as lowering of the water level to the top of the spent fuel assemblies within 72 hours after an earthquake. A sample of the Seismic Category I systems components were selected for inspection consistent with the SWEL 1 methods defined previously to create SWEL 2.
The method for selection of SWEL 2 SFP rapid drain-down items described in the EPRI Guidance is difficult to implement. When rapid drain-down items are identified, it is not clear what actions are required particularly if items are placed on SWEL 2. Rapid drain-


===2.3 Seismic===
E-     N R ONENGINEERING                   REPORT NO. EA12-021
Walkdown driven fire pump in the Intake Structure and failure of all makeup sources to the Emergency Feedwater Storage Tank (EFWST) except Raw Water.Using the existing PRA model, a list of potential seismic event accident sequences (i.e., cut-sets) was generated.
                              ,-REVISION                     I           PAGE 28 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown down would typically involve piping failure; however, the walkdown guidance does not include piping in the scope. In addition, the rapid drain-down considerations in the EPRI Guidance, such as pool sloshing evaluations, boil-off, leak size, etc., are not sufficiently defined for implementation as part of the walkdown / SWEL development process.
The list of importance measures for basic events appearing in the seismic event cut-sets were sorted based on the "Risk Achievement Worth, RAW" importance measure. The equipment with the highest importance according to this approach is listed below: " Diesel Generators (including inlet/exhaust dampers and fuel oil transfer pumps)* Station Batteries* Various 4160V Breakers* Air-Operated Auxiliary Feedwater Valves* 480V Buses* Auxiliary Feedwater Pumps FW-10 & FW-6 (including associated equipment)
SWEL 1 and SWEL 2 items were combined to form the SWEL. Generally speaking, all major components (e.g., tanks, heat exchangers, and pumps) needed for safe shutdown, following a seismic event and accompanied by a loss of offsite power (LOOP), were selected.
 
The SWEL was developed in the form of a spreadsheet, which allowed for manipulation/sorting of data and cross-referencing to build summary tables. The SWEL spreadsheet includes the following information:
===6.2 SPENT===
: 1. Sequential item number (used to develop the SWC ID #)
FUEL POOL (SFP) ITEMS A base list (BL 2) was developed by reviewing the spent fuel pool (SFP) cooling and inventory related systems for all safety-related, Seismic Category I equipment and reviewing the systems whose failure could result in rapid drain-down of the SFP to within 10' above the stored fuel. Rapid drain-down is defined as lowering of the water level to the top of the spent fuel assemblies within 72 hours after an earthquake.
: 2. A-46 Equipment Box (where provided)
A sample of the Seismic Category I systems components were selected for inspection consistent with the SWEL 1 methods defined previously to create SWEL 2.The method for selection of SWEL 2 SFP rapid drain-down items described in the EPRI Guidance is difficult to implement.
: 3. Component ID
When rapid drain-down items are identified, it is not clear what actions are required particularly if items are placed on SWEL 2. Rapid drain-E- N R ONENGINEERING REPORT NO. EA12-021 ,-REVISION I PAGE 28 OF 42 Fukushima Near-Term Task Force Recommendation  
: 4. Equipment Class (from GIP)
 
: 5. Item Description
===2.3 Seismic===
Walkdown down would typically involve piping failure; however, the walkdown guidance does not include piping in the scope. In addition, the rapid drain-down considerations in the EPRI Guidance, such as pool sloshing evaluations, boil-off, leak size, etc., are not sufficiently defined for implementation as part of the walkdown / SWEL development process.SWEL 1 and SWEL 2 items were combined to form the SWEL. Generally speaking, all major components (e.g., tanks, heat exchangers, and pumps) needed for safe shutdown, following a seismic event and accompanied by a loss of offsite power (LOOP), were selected.The SWEL was developed in the form of a spreadsheet, which allowed for manipulation/sorting of data and cross-referencing to build summary tables. The SWEL spreadsheet includes the following information:
: 1. Sequential item number (used to develop the SWC ID #)2. A-46 Equipment Box (where provided)3. Component ID 4. Equipment Class (from GIP)5. Item Description
: 6. System Designator
: 6. System Designator
: 7. Location (Room)8. Floor Elevation 9. Equipment Location 10. Power source (if applicable)
: 7. Location (Room)
The associated lists from the spreadsheet, BL 1, BL 2, and the combined SWEL can be found in Attachment 11.1. It shall be noted that the information (equipment description, elevation, location, etc.) provided in the base lists (BL1, BL2) is what is provided exactly  
: 8. Floor Elevation
.EENGINEERING REPORT NO. EA12-021 F1 ENERCON , ,.REVISION 1 PAGE 29 OF 42 Fukushima Near-Term Task Force Recommendation
: 9. Equipment Location
: 10. Power source (if applicable)
The associated lists from the spreadsheet, BL 1, BL 2, and the combined SWEL can be found in Attachment 11.1. It shall be noted that the information (equipment description, elevation, location, etc.) provided in the base lists (BL1, BL2) is what is provided exactly


===2.3 Seismic===
F1 EENGINEERING                            REPORT NO. EA12-021 ENERCON
Walkdown on the SSEL. The information provided in the SWEL is based on current information provided in the document management system utilized by Fort Calhoun Nuclear Station, Asset Suite. As such, the information from one list to the other may vary slightly, and has no effect on the implementation of the walkdowns performed at FCNS.  
        ,                ,.REVISION                        1          PAGE 29 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown on the SSEL. The information provided in the SWEL is based on current information provided in the document management system utilized by Fort Calhoun Nuclear Station, Asset Suite. As such, the information from one list to the other may vary slightly, and has no effect on the implementation of the walkdowns performed at FCNS.
, ENGINEERING REPORT NO. EA12-021 F3 ENERCON~ ~ ;:
REVISION I PAGE 30 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
                      ,                            ENGINEERING REPORT NO. EA12-021
Walkdown 7.0 Seismic Walk-downs and Area Walk-Bys Subsequent to the development of the SWEL, the SWE's prepared walkdown packages which consisted of the SWCs, AWCs, plant documentation showing the anchorage for at least 50% of the items on the SWEL and in-structure response-spectra, if available.
        **,*      ~
F3 ENERCON
                          ~      ;: Em'-i***.*.,r*  REVISION I          PAGE 30 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 7.0 Seismic Walk-downs and Area Walk-Bys Subsequent to the development of the SWEL, the SWE's prepared walkdown packages which consisted of the SWCs, AWCs, plant documentation showing the anchorage for at least 50% of the items on the SWEL and in-structure response-spectra, if available.
Having obtained assurance from the SWEL development team and the Peer Review team that the SWEL attributes contained in the EPRI Guidance were not compromised, a small number of components that were inaccessible were either removed from the SWEL or replaced by alternate components.
Having obtained assurance from the SWEL development team and the Peer Review team that the SWEL attributes contained in the EPRI Guidance were not compromised, a small number of components that were inaccessible were either removed from the SWEL or replaced by alternate components.
The initial set of walkdowns were conducted from August 1 3 th through August 2 9 th, 2012, and focused on anchorages, seismic spatial interactions, and other potentially adverse seismic conditions, such as bolts in degraded or non-conforming conditions, extensive corrosion, absence of, or, inadequate hardware, cracked concrete, corrosion of weld and/or base metal, etc. Remaining walkdowns of deferred items which are discussed in Revision 0 were concluded on March 2 9 th, 2013.In addition to the general inspection requirements, at least 50% of SWEL items with anchorage were required to be verified that their anchorage is consistent with plant documentation.
The initial set of walkdowns were conducted from August 13 th through August     2 9 th, 2012, and focused on anchorages, seismic spatial interactions, and other potentially adverse seismic conditions, such as bolts in degraded or non-conforming conditions, extensive corrosion, absence of, or, inadequate hardware, cracked concrete, corrosion of weld and/or base metal, etc. Remaining walkdowns of deferred items which are discussed in Revision 0 were concluded on March       2 9 th, 2013.
A total of 96 items were identified on the SWEL for inspection.
In addition to the general inspection requirements, at least 50% of SWEL items with anchorage were required to be verified that their anchorage is consistent with plant documentation. A total of 96 items were identified on the SWEL for inspection. Of the 96 items on the SWEL, 68 items had anchorage that was not considered in-line.
Of the 96 items on the SWEL, 68 items had anchorage that was not considered in-line.Anchorage configuration verification was performed on 39 items, which is greater than 50% of the items with anchorage not considered in-line. There are 96 SWCs provided in Attachment 11.2. It shall be noted that the information provided on the SWCs relative to equipment identification, location, description and floor elevation was input as provided in the FCNS document management system, Asset Suite.Area Walk-Bys were performed in conjunction with the walkdowns of each item. All areas/rooms containing equipment on the SWEL were included in the AWCs. Since E.odEJ EEN RGI 0ENERING RPORTNO. E'2-021... -..
Anchorage configuration verification was performed on 39 items, which is greater than 50% of the items with anchorage not considered in-line. There are 96 SWCs provided in Attachment 11.2. It shall be noted that the information provided on the SWCs relative to equipment identification, location, description and floor elevation was input as provided in the FCNS document management system, Asset Suite.
I PAGE 31 OF 42 Fukushima Near-Term Task Force Recommendation
Area Walk-Bys were performed in conjunction with the walkdowns of each item. All areas/rooms containing equipment on the SWEL were included in the AWCs. Since


===2.3 Seismic===
E.odEJEENRGI 0ENERING                    RPORTNO. E'2-021
Walkdown certain areas contained more than one SWEL item, the number of total area walk-bys conducted is less than the number of seismic walkdowns.
            ...  -    .. .E~c:*:-*:*,;*.*E:**!REVISION    I          PAGE 31 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown certain areas contained more than one SWEL item, the number of total area walk-bys conducted is less than the number of seismic walkdowns. A total of 33 area walk-bys were performed and the associated AWCs are provided in Attachment 11.3. It shall be noted that the floor elevation identified on the AWCs corresponds to the elevation from which the inspections were performed.
A total of 33 area walk-bys were performed and the associated AWCs are provided in Attachment 11.3. It shall be noted that the floor elevation identified on the AWCs corresponds to the elevation from which the inspections were performed.
In cases where the SWEs identified a potentially adverse seismic condition, the condition was identified on the SWC and/or AWC and a Licensing Basis Evaluation was performed.
In cases where the SWEs identified a potentially adverse seismic condition, the condition was identified on the SWC and/or AWC and a Licensing Basis Evaluation was performed.  
"-,&#xfd; ,--ENGINEERING REPORT NO. EA12-021 H E N E RCO N..
1PAGE 32 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
      "-,&#xfd;            ,--ENGINEERING                          REPORT NO. EA12-021 H EN ERCO N
Walkdown 8.0 Licensing Basis Evaluation
                            ,c:*c4":.s'c~r*/REVISION        1PAGE              32 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 8.0 Licensing Basis Evaluation 8.1 LICENSING BASIS EVALUATIONS Potentially adverse seismic conditions identified as part of the NTTF 2.3 Seismic Walkdown program may be evaluated by comparison to the current licensing basis of the plant as it relates to the seismic adequacy of the equipment in question, as is described in Section 5 of the EPRI Guidance. If the identified condition is consistent with existing seismic documentation associated with that item, then no further action is required. Ifthe identified condition cannot easily be shown to be consistent with existing seismic documentation, or no seismic documentation exists, then the condition is entered into the CAP.
Of the 70 identified potentially adverse seismic conditions, 70 LBEs were performed.
Each LBE performed is documented consistently, and included in Attachment 11.5. The results of these LBEs with respect to the associated potentially adverse seismic conditions are summarized in Attachment 11.4. A total of 21 potentially adverse seismic conditions evaluated using a LBE were dispositioned and require no further action, whereas 49 required CAP entry. It shall be noted that some of the potentially adverse seismic conditions are provided on the same CAP entry. The LBEs that were dispositioned were the result of inadequate anchorage configuration documentation at the time of the inspections. The SWE team documented as-built anchorage information as sketches on the checklists for further verification against plant documents.
The following Licensing Basis Evaluations provided below are worth noting. Refer to specific LBEs provided in Attachment 11.5 for more information on the condition.


===8.1 LICENSING===
ENGINEERING REPORT No.      EAI2-021 7j EENERCON* n-,jp ;rt  i            REVISION I            PAGE 33 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown LB-2 Condition:          Missing clamp attaching unistrut and pipe for FCV-1 369 (SWC-38). The unistrut holds the instrument line.
Evaluation:        CR 2012-10198 was initiated to resolve the condition.
LB-28 Condition:          Block wall lateral restraint is not in contact with block wall and is possibly not restraining block wall in current state. A potential seismic interaction concern with nearby pumps AC-5A and AC-5B.
Evaluation:        CR 2012-10915 was initiated to resolve the condition.
8.2 CORRECTIVE ACTON PROGRAM ENTRIES Conditions identified during the seismic walkdowns and area walk-bys that required further resolution were entered into the plant's Corrective Action Program (CAP) for further review and disposition in accordance with the plant's existing processes and procedures. Conditions entered into the CAP included three types of unusual conditions identified:
Seismically insignificant unusual conditions
* Potentially adverse seismic condition that does not pass a LBE
* Potentially adverse seismic condition that bypasses a LBE A total of 36 CRs were written relative to potentially adverse seismic conditions identified. The CR numbers, current status, and resolution (where applicable and available) are summarized for these potentially adverse seismic conditions in 1.4.


BASIS EVALUATIONS Potentially adverse seismic conditions identified as part of the NTTF 2.3 Seismic Walkdown program may be evaluated by comparison to the current licensing basis of the plant as it relates to the seismic adequacy of the equipment in question, as is described in Section 5 of the EPRI Guidance.
t-*          .ENGINEERING                              REPORT NO. EA12-021 ENENERCON              .      RVSO
If the identified condition is consistent with existing seismic documentation associated with that item, then no further action is required.
                                                    .REVISION 1          PAGE 34 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 8.3 PLANT CHANGES There were no immediately implemented plant changes warranted by the results of the NTTF 2.3 Seismic Walkdown program. Resolutions of the CRs for seismically insignificant unusual conditions and potentially adverse seismic conditions identified will determine if future modifications to the plant are required. While no plant modifications have been identified as a result of the seismic walkdowns and walk-bys, various cases were found where repairs were required or housekeeping issues needed to be addressed. Current status and resolutions (where applicable and available) for CRs related to potentially adverse seismic conditions are provided in Attachment 11.4.
If the identified condition cannot easily be shown to be consistent with existing seismic documentation, or no seismic documentation exists, then the condition is entered into the CAP.Of the 70 identified potentially adverse seismic conditions, 70 LBEs were performed.
 
Each LBE performed is documented consistently, and included in Attachment 11.5. The results of these LBEs with respect to the associated potentially adverse seismic conditions are summarized in Attachment 11.4. A total of 21 potentially adverse seismic conditions evaluated using a LBE were dispositioned and require no further action, whereas 49 required CAP entry. It shall be noted that some of the potentially adverse seismic conditions are provided on the same CAP entry. The LBEs that were dispositioned were the result of inadequate anchorage configuration documentation at the time of the inspections.
                        " ENERCON NENERCON                    ENGINEERING REPORT NO. EA12-021
The SWE team documented as-built anchorage information as sketches on the checklists for further verification against plant documents.
....   .. 1,'.,4,**;,r*
The following Licensing Basis Evaluations provided below are worth noting. Refer to specific LBEs provided in Attachment 11.5 for more information on the condition.
              ..                                     REVISION I           PAGE 35 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 9.0 Peer Review 9.1 PEER REVIEW PROCESS The Peer Review for the NTTF Recommendation 2.3: Seismic walkdowns was performed in accordance with Section 7 of the EPRI Guidance. The following activities were peer reviewed:
ENGINEERING REPORT No. EAI2-021 7j EENERCON.... .. ... n-,jp ;rt i REVISION I PAGE 33 OF 42 Fukushima Near-Term Task Force Recommendation  
* selection of SSC's for the SWEL
* sample of the checklists prepared for the seismic walkdowns and area walk-bys
* licensing basis evaluations
* decisions for entering the potentially adverse conditions into the CAP process
* submittal report
      "    results of the peer review process in the submittal report The selection of items for the SWEL was peer reviewed in accordance with Section 3 of the EPRI Guidance. The peer review team members independently provided comments to the personnel who prepared the SWEL. Peer review comments were resolved and incorporated into the final SWEL, ensuring that all recommendations of the EPRI Guidance have been met. The final SWEL contains a diverse sample of equipment required to perform the five safety functions specified in the EPRI Guidance, which are:
      "    Reactor reactivity control
      "    Reactor coolant pressure control
* Reactor coolant inventory control
* Decay heat removal
* Containment integrity


===2.3 Seismic===
E NENGINEERING                          REPORT NO. EA12-021
Walkdown LB-2 Condition:
              * ,0rJ;**,*.=n*-E'*'p:*~a*REVISION            I          PAGE 36 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown In addition, the peer review process verified that SWEL items included major new and replacement items, a variety of environments, equipment enhanced based on findings of the IPEEE (if any), and risk insight considerations.
Evaluation:
The peer review team confirmed that the SWE walkdown team performed the seismic walkdowns and area walk-bys as described in Section 4 of the EPRI Guidance. A minimum of 10-25% of the SWCs and AWCs were reviewed for consistency and accuracy. The majority of the peer reviews occurred at the start of the walkdowns, and the reviewers were able to provide comments at the early stages of the process. This helped to ensure consistency and confirm that walkdowns were being performed in accordance with all the requirements of the EPRI Guidance.
Missing clamp attaching unistrut and pipe for FCV-1 369 (SWC-38).
All potentially adverse seismic conditions were entered into the plant's CAP program for further review and disposition. The review team verified the decisions for identifying such conditions as sound, and the dispositions were conducted in accordance with the plant's current license basis (CLB).
The unistrut holds the instrument line.CR 2012-10198 was initiated to resolve the condition.
A peer review was completed of the licensing basis evaluations provided in Attachment 11.5. Within these licensing basis evaluations, CRs were generated for maintenance issues to replace missing bolts, nuts or remove items for housekeeping issues, or to provide further, detailed resolution of the potentially adverse seismic condition. The remaining licensing basis evaluations were created to document potentially adverse seismic conditions that were immediately entered into the CAP for detailed evaluation and investigation. The peer review of these LBEs ensured that all the information provided from the walkdown team to the licensing basis evaluation team member provided enough detail for accurate and timely resolution.
LB-28 Condition:
The peer review team was provided with an early draft of this submittal report for peer review. The peer review team verified that the submittal report met the objectives and requirements of Enclosure 3 to the 50.54(f) Letter, and documented the NTTF 2.3
Block wall lateral restraint is not in contact with block wall and is possibly not restraining block wall in current state. A potential seismic interaction concern with nearby pumps AC-5A and AC-5B.Evaluation:
CR 2012-10915 was initiated to resolve the condition.


===8.2 CORRECTIVE===
      ....          :.ENERCON
                            ----                  ENGINEERING REPORT        E    -2 No. EAI 2-021
        ,                ,:.NERCON          .      REVISION I          PAGE 37 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Seismic Walkdown program performed in accordance with the EPRI Guidance. The peer review team provided the results of review activities to the SWE team for consideration. The SWE team satisfactorily addressed all peer review comments in the final version of the submittal report. The signature of the Peer Review Team Leader provides documentation that all elements of the peer review as described in Section 6 of the EPRI Guidance were completed.
9.2 PEER REVIEW RESULTS


ACTON PROGRAM ENTRIES Conditions identified during the seismic walkdowns and area walk-bys that required further resolution were entered into the plant's Corrective Action Program (CAP) for further review and disposition in accordance with the plant's existing processes and procedures.
==SUMMARY==
Conditions entered into the CAP included three types of unusual conditions identified:
 
Seismically insignificant unusual conditions
Peer Review of the seismic walkdowns and area walk-bys were conducted by Ashwin Patel and David Haas, who have extensive experience in seismic engineering as applied to nuclear power plants. The peer review team reviewed the walkdown packages (checklists, photos, drawings etc.) and ensured that the SWCs and AWCs were completed in accordance with the EPRI Guidance. The checklists were selected at random and 25 out of 96 SWC forms (26% of total) and 20 of 33 AWC forms (61% of total) were reviewed.
* Potentially adverse seismic condition that does not pass a LBE* Potentially adverse seismic condition that bypasses a LBE A total of 36 CRs were written relative to potentially adverse seismic conditions identified.
The table below summarizes the checklists that were reviewed:
The CR numbers, current status, and resolution (where applicable and available) are summarized for these potentially adverse seismic conditions in Attachment 11.4.  
Equipment ID          SWC No. AWC No.
.ENGINEERING REPORT NO. EA12-021 ENENERCON
(from SWEL) 1              FT-1368                52          1 2          YCV-871 H-20                4          2 3                DG-2                  51          4 4              FO-2-2                62          4 5              FO-4A-2                21          4 6              EE-8A                  48          5 7              EE-4S                  15          7
.RVSO.REVISION 1 PAGE 34 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
4ENGINEERING                                  REPORT NO. EA12-021 E3  .ENERON          REVISION I         PAGE 38 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Equipment ID    SWC No. AWC No.
Walkdown 8.3 PLANT CHANGES There were no immediately implemented plant changes warranted by the results of the NTTF 2.3 Seismic Walkdown program. Resolutions of the CRs for seismically insignificant unusual conditions and potentially adverse seismic conditions identified will determine if future modifications to the plant are required.
(from SWEL) 8          T1B-3C          16          7 9            FP1 B          76        10 10          AC-12B-M          2          11 11            AI-41A          45          14 12          LT-1183          53          16 13          RW-262          96          16 14          HCV-478          91          18 15            CH-172          73          19 16            AC-1A          59        20 17          HCV-484          27        20 18            AC-102          66        21 19          HCV-2893          35        22 20            AC-4B          60        23 21          HCV-240          36        25 22            SI-6A          89        26 23          HCV-2918          83        29 24          B/PT-913        55        30 25            AC-7          94        33 Table 2 - Summary of Peer Reviewed Checklists
While no plant modifications have been identified as a result of the seismic walkdowns and walk-bys, various cases were found where repairs were required or housekeeping issues needed to be addressed.
Current status and resolutions (where applicable and available) for CRs related to potentially adverse seismic conditions are provided in Attachment 11.4.
ENERCON ENGINEERING REPORT NO. EA12-021" NENERCON.... .. ..
REVISION I PAGE 35 OF 42 Fukushima Near-Term Task Force Recommendation  


===2.3 Seismic===
4640WEECENGINEERING                      REPORT NO. EA1 2-021
Walkdown 9.0 Peer Review 9.1 PEER REVIEW PROCESS The Peer Review for the NTTF Recommendation 2.3: Seismic walkdowns was performed in accordance with Section 7 of the EPRI Guidance.
          * ,,,,  ,*  .*:.::**.*'*~a;=**r/aREVISION    I          PAGE 39 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 10.0 References
The following activities were peer reviewed:* selection of SSC's for the SWEL* sample of the checklists prepared for the seismic walkdowns and area walk-bys* licensing basis evaluations
: 1. 10 CFR 50.54(f) Letter "Request for Information Pursuant to Title 10 of the Code of Federal Regulations 50.54(f) Regarding Recommendations 2.1, 2.3 and 9.3 of the Near Term Task Force Review of Insights from the Fukushima Dai-Ichi Accident", dated March 12, 2012
* decisions for entering the potentially adverse conditions into the CAP process* submittal report" results of the peer review process in the submittal report The selection of items for the SWEL was peer reviewed in accordance with Section 3 of the EPRI Guidance.
: 2. EPRI 1025286, Seismic Walkdown Guidance for Resolution of Fukushima Near-Term Task Force Recommendation 2.3: Seismic, June 2012
The peer review team members independently provided comments to the personnel who prepared the SWEL. Peer review comments were resolved and incorporated into the final SWEL, ensuring that all recommendations of the EPRI Guidance have been met. The final SWEL contains a diverse sample of equipment required to perform the five safety functions specified in the EPRI Guidance, which are: " Reactor reactivity control" Reactor coolant pressure control* Reactor coolant inventory control* Decay heat removal* Containment integrity E NENGINEERING REPORT NO. EA12-021 I PAGE 36 OF 42 Fukushima Near-Term Task Force Recommendation
: 3. OPPD Fort Calhoun Power Station Updated Safety Analysis Report (USAR).
Revision 4, Issued 04-15-2011
: 4. OPPD Fort Calhoun Station Plant Level Design Basis Document (PLDBD)
: 5. Generic Letter No, 88-20, Supplement 4, Individual Plant Examination of External Events (IPEEE) for Severe Accident Vulnerabilities
: 6. Generic Letter No, 87-02, Verification of Seismic Adequacy of Mechanical and Electrical Equipment in Operating Reactors, Unresolved Safety Issue (USI) A-46
: 7. Seismic Qualification Utility Group (SQUG) Procedure: Generic Implementation Procedure (GIP) for Seismic Verification of Nuclear Power Plant Equipment, Revision 3A, December 2001
: 8. NRC-98-129 "Fort Calhoun Station, Unit No.1 - Closeout of Unresolved Safety Issue A-46 (TAC No. M69447)", dated July 30, 1998
: 9. U.S. Nuclear Regulatory Commission, "Endorsement of Electric Power Research Institute (EPRI) document 1025286, "Seismic Walkdown Guidance",
May 31, 2012....


===2.3 Seismic===
      ~7!.**j*,*EENERCON II  ENGINEERING REPORT  No. EAE2-021
Walkdown In addition, the peer review process verified that SWEL items included major new and replacement items, a variety of environments, equipment enhanced based on findings of the IPEEE (if any), and risk insight considerations.
                    **t'**
The peer review team confirmed that the SWE walkdown team performed the seismic walkdowns and area walk-bys as described in Section 4 of the EPRI Guidance.
                    ,*.:**-,*p;*,**tREVISION          I          PAGE 40 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown
A minimum of 10-25% of the SWCs and AWCs were reviewed for consistency and accuracy.
: 10. U.S. Nuclear Regulatory Commission, "Recommendations for Enhancing Reactor Safety in the 2 1 st Century - The Near-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident," July 12, 2011
The majority of the peer reviews occurred at the start of the walkdowns, and the reviewers were able to provide comments at the early stages of the process. This helped to ensure consistency and confirm that walkdowns were being performed in accordance with all the requirements of the EPRI Guidance.All potentially adverse seismic conditions were entered into the plant's CAP program for further review and disposition.
: 11. Nuclear Reactors and Earthquakes, TID-7024, Division of Licensing and Regulation, AEC, Washington, D.C., August, 1963
The review team verified the decisions for identifying such conditions as sound, and the dispositions were conducted in accordance with the plant's current license basis (CLB).A peer review was completed of the licensing basis evaluations provided in Attachment 11.5. Within these licensing basis evaluations, CRs were generated for maintenance issues to replace missing bolts, nuts or remove items for housekeeping issues, or to provide further, detailed resolution of the potentially adverse seismic condition.
: 12. Design Criteria for Nuclear Reactors Subjected to Earthquake Hazards, Newmark, N.M., Department of Civil Engineering, University of Illinois (presented in Tokyo, 1968)
The remaining licensing basis evaluations were created to document potentially adverse seismic conditions that were immediately entered into the CAP for detailed evaluation and investigation.
: 13. Report to AEC Regulatory Staff, Adequacy of the Structural Criteria for Fort Calhoun Station - Unit No.1, Omaha Public Power District (Docket No. 50-285),
The peer review of these LBEs ensured that all the information provided from the walkdown team to the licensing basis evaluation team member provided enough detail for accurate and timely resolution.
by N.M. Newmark, W.J. hall and A.J. Hendron, January 12, 1968
The peer review team was provided with an early draft of this submittal report for peer review. The peer review team verified that the submittal report met the objectives and requirements of Enclosure 3 to the 50.54(f) Letter, and documented the NTTF 2.3
: 14. USNRC Safety Evaluation Report of Alternate Seismic Criteria and Methodologies- Fort Calhoun Station, April 16, 1993, TAC No. M71408 (NRC-93-0150)
---- ENGINEERING REPORT No. EAI 2-021.... :.ENERCON E -2 , ,:.NERCON
: 15. EA-FC-94-003, Alternate Seismic Criteria and Methodologies, Rev.0
.REVISION I PAGE 37 OF 42 Fukushima Near-Term Task Force Recommendation
: 16. USNRC Safety Evaluation Report, Fort Calhoun Station Unit No.1 - Request for Relief from Modifying Pipe Supports SIS-63/65, SIH-3 and RCH-13 (TAC-No. M5547), OPPD Tracking No. NRC-96-188
: 17. Generic Implementation Procedure (GIP) for Seismic Verification of Nuclear Power Plant Equipment, Revision 2, Corrected 02/14/98, Seismic Qualification Utility Group (SQUG), February 1992
: 18. NRC letter to SQUG Members dated May 22, 1992, Supplemental No.1 to Generic Letter 87-02 transmitting Supplemental Safety Evaluation Report No.2 (SSER No.2) on SQUG Generic Implementation Procedure, Revision 2, Corrected February 14, 1992 (GIP-2)


===2.3 Seismic===
ENGINEERING REPORT    No. EA12-021
Walkdown Seismic Walkdown program performed in accordance with the EPRI Guidance.
__,__*-E-,pt*E                            1          REVISION I            PAGE 41 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown
The peer review team provided the results of review activities to the SWE team for consideration.
: 19. SQUG Letter to NRC dated August 21, 1992, SQUG Response to Generic Letter 87-02, Supplement 1 and Supplemental Safety Evaluation Report No.2 on the SQUG GIP
The SWE team satisfactorily addressed all peer review comments in the final version of the submittal report. The signature of the Peer Review Team Leader provides documentation that all elements of the peer review as described in Section 6 of the EPRI Guidance were completed.
: 20. EA-FC-93-085, NRC USI A-46 and Seismic IPEEE Resolution
9.2 PEER REVIEW RESULTS
: 21.      NRC Letter to OPPD dated July 30, 1998, Fort Calhoun Station Unit No.1 -
Closeout of Unresolved Safety Issue A-46 (TAC No. M69447), OPPD Tracking No. NRC-98-129
: 22. Generic Implementation Procedure for Seismic Verification of Nuclear Power Plant Equipment, Revision 3, Updated 05/16/97 (GIP-3), Seismic Qualification Utility Group (SQUG), May 1997
: 23. NRC letter for SQUG dated December 4, 1997, Supplemental Safety Evaluation Report No.3 (SSER No. 3) on the Review of Revision 3 to the Generic Implementation Procedure for Seismic Verification of Nuclear Power Plant Equipment, Updated May 16, 1997 (GIP-3)
: 24. Fort Calhoun Station Calculation FC06945 (AREVA NP Inc., Document 32-5028554-01, FCS RSG - RCS Structural Evaluation) FCS RSG - RCS Structural Analysis
: 25. SL-4910, Individual Plant Examinations for External Events Seismic Margin Assessment Final Technical Report, March 1994, Revision 0
: 26. EA 96-017, SQUG Program Document Update, Revision 1
: 27. USNRC Regulatory Guide 1.200, An Approach for Determining the Technical Adequacy of Probabilistic Risk Assessment Results for Risk-Informed Activities, Revision 2


==SUMMARY==
I-'tJ ENRCON                ENGINEERING REPORT NO. EA12-021
Peer Review of the seismic walkdowns and area walk-bys were conducted by Ashwin Patel and David Haas, who have extensive experience in seismic engineering as applied to nuclear power plants. The peer review team reviewed the walkdown packages (checklists, photos, drawings etc.) and ensured that the SWCs and AWCs were completed in accordance with the EPRI Guidance.
          ... =**  **;*-*;
The checklists were selected at random and 25 out of 96 SWC forms (26% of total) and 20 of 33 AWC forms (61% of total) were reviewed.The table below summarizes the checklists that were reviewed: Equipment ID SWC No. AWC No.(from SWEL)1 FT-1368 52 1 2 YCV-871 H-20 4 2 3 DG-2 51 4 4 FO-2-2 62 4 5 FO-4A-2 21 4 6 EE-8A 48 5 7 EE-4S 15 7 4ENGINEERING REPORT NO. EA12-021 E3 .ENERON REVISION I PAGE 38 OF 42 Fukushima Near-Term Task Force Recommendation
                    ...     .. ;*REVISION          I          PAGE 42 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 11.0 Attachments ATTACHMENT 11.1 - SEISMIC WALKDOWN EQUIPMENT LISTS ATTACHMENT 11.2 - SEISMIC WALKDOWN CHECKLISTS ATTACHMENT 11.3 - AREA WALK-BY CHECKLISTS ATTACHMENT 11.4 - POTENTIALLY ADVERSE SEISMIC CONDITIONS ATTACHMENT 11.5 - LICENSING BASIS EVALUATION FORMS ATTACHMENT 11.6 - PEER REVIEW CHECKLISTS FOR SWEL ATTACHMENT 11.7 - SEISMIC WALKDOWN ENGINEER TRAINING CERTIFICATES


===2.3 Seismic===
EA12-021, Rev. 1 ATTACHMENT 11.1 PAGE 28 OF 30 SEISMIC WALKDOWN EQUIPMENT LIST (SWEL)
Walkdown Equipment ID SWC No. AWC No.(from SWEL)8 T1B-3C 16 7 9 FP1 B 76 10 10 AC-12B-M 2 11 11 AI-41A 45 14 12 LT-1183 53 16 13 RW-262 96 16 14 HCV-478 91 18 15 CH-172 73 19 16 AC-1A 59 20 17 HCV-484 27 20 18 AC-102 66 21 19 HCV-2893 35 22 20 AC-4B 60 23 21 HCV-240 36 25 22 SI-6A 89 26 23 HCV-2918 83 29 24 B/PT-913 55 30 25 AC-7 94 33 Table 2 -Summary of Peer Reviewed Checklists 4640W EECENGINEERING REPORT NO. EA1 2-021,,,,
ASSEL SWEL Item    BOX    Associated Safe CLASS DESCRIPTION                                                    SYSTEM  ROOM  ELEV    LOCATION    Safety Functions SFP Item    Comments Number              Shutdown List 1      AC-12B      AC-12B        0  RAW WATER STRAINER                                              AC-RW  INTK 0994 13W'BB-16N'104          4 2      AC-12B      AC-12B-M      0  RAW WATER STRAINER AC-12B MOTOR                                  AC-RW  INTK 0999 13W'BB-16N'104          4 3    YCV-871H    YCV-871H      0  DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER                VA    MISL 1024  1OW'K-11S'IA    1,2, 3, 4,5 4    YCV-871H    YCV-871H-20    0  DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID            VA    MISL 1020  1W'K-11S'1A    1, 2, 3,4, 5 5    MCC-3B1    MCC-3B1-C2R      1  VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER                EE-5    57  1013    MCC-3B1            5 6        113A        1B3A        2  480 VOLT BUS 1B3A (EE-4F)                                        EE-4B    56  1011  10W'C-21N'5B    1,2,3,4,5      SFP 7        1B3B        1B3B        2  480 VOLT BUS 1B3B (EE-4H)                                        EE-4B    56  1011  1OWC'-9N'5B      1,2,3,4,5      SFP 8       1B3C        1B3C        2  480 VOLT BUS 1B3C (EE-4K)                                        EE-48    56  1011  1OW'C-10N'4A          1,2 9       1B4A        1B4A        2  480 VOLT BUS 1B4A (EE-4G)                                        EE-4B  56  1011  10E'D-15S'SD    1.2,3,4,5      SFP 10       1B4B        1B4B        2  480 VOLT BUS 1949 (EE-4J)                                        EE-4B    56  1011  1OE'D-12N'5B      1,2,3,5 11       1B4C        1B4C        2  480 VOLT BUS 1B4C (EE-4L)                                        EE-4B    56  1011  15W'C-4N'4A      1,2,3,4,5      SFP 12        1A4        1A4-11       3  EREAKER UNIT FEEDER FOR RAW WATER PUMP AC-1OB                    EE-4A    56  1011      1A4                4        SFP 13         1A3          1A3        3  4.16KV BUS (EE-4C)                                                EE-4A  56  1016  11W'C-18N'1A    1,2,3,4,5      SFP 14         1A4          1A4        3  4.16KV BUS (EE-4D)                                                EE-4A  56  1016  16W'C-18N'lA    1,2.3.4,5      SFP 15       EE-4S        EE-4S        4  INVERTER #1, EE-8P BYPASS TRANSFORMER                              EE    56  1011  OW'C-11N'6D          none 16       T1B-3C      T1B-3C        4  4160/480 TRANSFORMER BUS 113C                                      EE    56  1011  7W'C-17N'4A          1,2 17      AC-3C        AC-3C        5  COMPONENT COOLING WATER PUMP                                    AC-CCW    69  1027  1W'N-3N'BA          3,4        SFP 18      AC-3B        AC-3B        5  COMPONENT COOLING WATER PUMP                                    AC-CCW    69  1027    W'N-4'S8A          3,4        SFP 19      CH-1A        CH-1A       5  CHARGING PUMP                                                      CH      6  0991    5E'U-4N'6E        1,2,3 20       DG-2      FO-17-2      5  DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP      FO-DG    64  1010  20WF-22N'1A      1,2,3,4,5 21       DG-2      FO-4A-2      5  D2 FUEL OIL TRANSFER PUMP #1                                    FO-DG    64  1012  3W'K-6S'2B      1,2.3,4,35 22       FW-10        FW-10        5  AUXILIARY FEEDWATER PUMP (TURBINE-DRIVEN)                      FW-AFW    19  0991  3W'C-1N'3A            4 23        FW-6        FW-6        5  AUXILIARY FEEDWATER PUMP (MOTOR-DRIVEN)                        FW-AFW    19  0992  4W'C-5S'4A            4 24      AC-10B      AC-108        6  RAW WATER PUMP                                                  AC-RW  INTK 0994  1E'CC-1N'103          3.4        SFP 25      AC-10D      AC-10D        6  RAW WATER PUMP                                                  AC-RW  INTK 0994  1E'CC-IN'104          3,4        SFP 26      HCV-474      HCV-474      7  SI-IA&B,2AB&CISI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE AC-CCW    6  0992  9WrT-2N'6E          none        SEP 27      HCV-484      HCV-484      7  SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE                AC-CCW    4  0993  2E'E-22N'5B            4 28    HCV-489B    HCV-489B      7  COMP COOLING HT EXCH AC-lA CCW OUTLET VALVE                    AC-CCW    4  0992  1OW'D-1N'6D          4,5 29     HCV-497      HCV-497      7  COMP CLG HT EXCHS AC-IA-D CCW BYPASS LINE ISOLATION VALVE      AC-CCW    4  0991    2E'E-S'7A          4.5 30     TCV-893      TCV-893      7  AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE    AC-CCW    72  1037  8WJ1-12N'7A          none 31    HCV-2874A  HCV-2874A      7  RAW WATER PUMPS DISCH HEADER ISOLATION VALVE                    AC-RW  INTK 1001  6E'CC-4S'103          4,5        SFP 32    HCV-2875A    HCV-2875A      7   RAW WATER PUMPS DISCH HEADER ISOLATION VALVE                    AC-RW  INTK 1001  6E'CC-7N'103          4,5        SFP 33     HCV-2877A    HCV-2877A      7  COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE    AC-RW    18  0993  13E'D-12S'6D          4,5        SFP 34    HCV-2880A    HCV-2880A      7  COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE                AC-RW    18  0994  13E'D-6S'6D          4,5        SFP 35    HCV-2893    HCV-2893      7  RAW WATER TO CCW ISOLATION VALVE                                AC-RW    18  0993  13E'D-19S'6D          4,5        SFP 36      HCV-240      HCV-240      7  PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE                      CH  CONT  1045  14W'DD-6N'Il            5 37    LCV-218-3    LCV-218-3      7  CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ &BORIC ACID SUPPLY VLV    CH      7  0992  45W'T-2N'7B          1,2.3
I PAGE 39 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 1 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NI I UD--
Walkdown 10.0 References
Seismic Walkdown Checklist (SWC)                    SWC- 1 Equipment ID No.        AC-12B                    Equip. Class, 0. Other Equipment Description Raw Water Strainer Location: Bldg. Intake              Floor El. 994'          Room, Area Intake Structure, 13W'BB-16N'104 Manufacturer, Model, Etc. (optional but recommended)
: 1. 10 CFR 50.54(f) Letter "Request for Information Pursuant to Title 10 of the Code of Federal Regulations 50.54(f) Regarding Recommendations 2.1, 2.3 and 9.3 of the Near Term Task Force Review of Insights from the Fukushima Dai-Ichi Accident", dated March 12, 2012 2. EPRI 1025286, Seismic Walkdown Guidance for Resolution of Fukushima Near-Term Task Force Recommendation 2.3: Seismic, June 2012 3. OPPD Fort Calhoun Power Station Updated Safety Analysis Report (USAR).Revision 4, Issued 04-15-2011
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. OPPD Fort Calhoun Station Plant Level Design Basis Document (PLDBD)5. Generic Letter No, 88-20, Supplement 4, Individual Plant Examination of External Events (IPEEE) for Severe Accident Vulnerabilities
Anchorage
: 6. Generic Letter No, 87-02, Verification of Seismic Adequacy of Mechanical and Electrical Equipment in Operating Reactors, Unresolved Safety Issue (USI) A-46 7. Seismic Qualification Utility Group (SQUG) Procedure:
: 1. Is the anchorage configuration verification required (i.e., is the item one    YO NDl of the 50% of SWEL items requiring such verification)?
Generic Implementation Procedure (GIP) for Seismic Verification of Nuclear Power Plant Equipment, Revision 3A, December 2001 8. NRC-98-129 "Fort Calhoun Station, Unit No.1 -Closeout of Unresolved Safety Issue A-46 (TAC No. M69447)", dated July 30, 1998 9. U.S. Nuclear Regulatory Commission, "Endorsement of Electric Power Research Institute (EPRI) document 1025286, "Seismic Walkdown Guidance", May 31, 2012....
: 2. Is the anchorage free of bent, broken, missing or loose hardware?              YDl NO U-- N/AD-Strainerbase has four 1.25" diameteranchorbolts to concrete, all of which have a lack of thread engagement to their nuts (varies from 3/8" to 1"). Also, nut seems bent. CR 2012-10553 initiated.
I ENGINEERING REPORT No. EAE 2-021~7 EENERCON I I PAGE 40 OF 42 Fukushima Near-Term Task Force Recommendation
: 3. Is the anchorage free of corrosion that is more than mild surface              YO NDI    UD1 N/AD]
oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the                YM NDI UD1 N/AD anchors?
IEnter the equipment class name from Appendix B: Classes of Equipment.


===2.3 Seismic===
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 2 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE] UE]
Walkdown 10. U.S. Nuclear Regulatory Commission, "Recommendations for Enhancing Reactor Safety in the 2 1 st Century -The Near-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident," July 12, 2011 11. Nuclear Reactors and Earthquakes, TID-7024, Division of Licensing and Regulation, AEC, Washington, D.C., August, 1963 12. Design Criteria for Nuclear Reactors Subjected to Earthquake Hazards, Newmark, N.M., Department of Civil Engineering, University of Illinois (presented in Tokyo, 1968)13. Report to AEC Regulatory Staff, Adequacy of the Structural Criteria for Fort Calhoun Station -Unit No.1, Omaha Public Power District (Docket No. 50-285), by N.M. Newmark, W.J. hall and A.J. Hendron, January 12, 1968 14. USNRC Safety Evaluation Report of Alternate Seismic Criteria and Methodologies-Fort Calhoun Station, April 16, 1993, TAC No. M71408 (NRC-93-0150)15. EA-FC-94-003, Alternate Seismic Criteria and Methodologies, Rev.0 16. USNRC Safety Evaluation Report, Fort Calhoun Station Unit No.1 -Request for Relief from Modifying Pipe Supports SIS-63/65, SIH-3 and RCH-13 (TAC-No. M5547), OPPD Tracking No. NRC-96-188
Seismic Walkdown Checklist (SWC)                    SWC- 1 Equipment ID No.         AC-12B                    Equip. Class2 0, Other Equipment Description Raw Water Strainer
: 17. Generic Implementation Procedure (GIP) for Seismic Verification of Nuclear Power Plant Equipment, Revision 2, Corrected 02/14/98, Seismic Qualification Utility Group (SQUG), February 1992 18. NRC letter to SQUG Members dated May 22, 1992, Supplemental No.1 to Generic Letter 87-02 transmitting Supplemental Safety Evaluation Report No.2 (SSER No.2) on SQUG Generic Implementation Procedure, Revision 2, Corrected February 14, 1992 (GIP-2)
: 5. Is the anchorage configuration consistent with plant documentation?          YZ NE] UE] N/All (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
ENGINEERING REPORT No. EA12-021 1  REVISION I PAGE 41 OF 42 Fukushima Near-Term Task Force Recommendation
The anchorageconfigurationis consistent with drawing 12545, Rev. 8 (File# 12107).
: 6. Based on the above anchorage evaluations, is the anchorage free of            YE] NZ UE]
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?        Y[  NE] UE-] N/AE]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     Y[  NEI  uF- N/All]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                  YZ NE] Ul-- N/A[-]
: 10. Based on the above seismic interaction evaluations, is equipment free        YN NE] UE of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.


===2.3 Seismic===
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 3 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NFD    U--
Walkdown 19. SQUG Letter to NRC dated August 21, 1992, SQUG Response to Generic Letter 87-02, Supplement 1 and Supplemental Safety Evaluation Report No.2 on the SQUG GIP 20. EA-FC-93-085, NRC USI A-46 and Seismic IPEEE Resolution
Seismic Walkdown Checklist (SWC)                    SWC- 1 Equipment ID No.         AC-12B                    Equip. Class3 0, Other Equipment Description Raw Water Strainer Other Adverse Conditions
: 21. NRC Letter to OPPD dated July 30, 1998, Fort Calhoun Station Unit No.1 -Closeout of Unresolved Safety Issue A-46 (TAC No. M69447), OPPD Tracking No. NRC-98-129
: 11. Have you looked for and found no other seismic conditions that could    Y[    N[D ULi adversely affect the safety functions of the equipment?
: 22. Generic Implementation Procedure for Seismic Verification of Nuclear Power Plant Equipment, Revision 3, Updated 05/16/97 (GIP-3), Seismic Qualification Utility Group (SQUG), May 1997 23. NRC letter for SQUG dated December 4, 1997, Supplemental Safety Evaluation Report No.3 (SSER No. 3) on the Review of Revision 3 to the Generic Implementation Procedure for Seismic Verification of Nuclear Power Plant Equipment, Updated May 16, 1997 (GIP-3)24. Fort Calhoun Station Calculation FC06945 (AREVA NP Inc., Document 32-5028554-01, FCS RSG -RCS Structural Evaluation)
Comments (Additional pages may be added as necessary)
FCS RSG -RCS Structural Analysis 25. SL-4910, Individual Plant Examinations for External Events Seismic Margin Assessment Final Technical Report, March 1994, Revision 0 26. EA 96-017, SQUG Program Document Update, Revision 1 27. USNRC Regulatory Guide 1.200, An Approach for Determining the Technical Adequacy of Probabilistic Risk Assessment Results for Risk-Informed Activities, Revision 2 I-' tJ ENRCON ENGINEERING REPORT NO. EA12-021... ... ..
V-4-0 Evaluated by: John Kao                                                            Date: 8/17/2012 Alex Smerch          _                                                8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
I PAGE 42 OF 42 Fukushima Near-Term Task Force Recommendation


===2.3 Seismic===
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 4 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN    NE] UD--
Walkdown 11.0 Attachments ATTACHMENT 11.1 -SEISMIC WALKDOWN EQUIPMENT LISTS ATTACHMENT 11.2 -SEISMIC WALKDOWN CHECKLISTS ATTACHMENT 11.3 -AREA WALK-BY CHECKLISTS ATTACHMENT 11.4 -POTENTIALLY ADVERSE SEISMIC CONDITIONS ATTACHMENT 11.5 -LICENSING BASIS EVALUATION FORMS ATTACHMENT 11.6 -PEER REVIEW CHECKLISTS FOR SWEL ATTACHMENT 11.7 -SEISMIC WALKDOWN ENGINEER TRAINING CERTIFICATES EA12-021, Rev. 1 ATTACHMENT 11.1 PAGE 28 OF 30 SEISMIC WALKDOWN EQUIPMENT LIST (SWEL)ASSEL SWEL Item BOX Associated Safe CLASS DESCRIPTION SYSTEM ROOM ELEV LOCATION Safety Functions SFP Item Comments Number Shutdown List 1 AC-12B AC-12B 0 RAW WATER STRAINER AC-RW INTK 0994 13W'BB-16N'104 4 2 AC-12B AC-12B-M 0 RAW WATER STRAINER AC-12B MOTOR AC-RW INTK 0999 13W'BB-16N'104 4 3 YCV-871H YCV-871H 0 DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER VA MISL 1024 1OW'K-11S'IA 1,2, 3, 4,5 4 YCV-871H YCV-871H-20 0 DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID VA MISL 1020 1W'K-11S'1A 1, 2, 3,4, 5 5 MCC-3B1 MCC-3B1-C2R 1 VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER EE-5 57 1013 MCC-3B1 5 6 113A 1B3A 2 480 VOLT BUS 1B3A (EE-4F) EE-4B 56 1011 10W'C-21N'5B 1,2,3,4,5 SFP 7 1B3B 1B3B 2 480 VOLT BUS 1B3B (EE-4H) EE-4B 56 1011 1OWC'-9N'5B 1,2,3,4,5 SFP 8 1B3C 1B3C 2 480 VOLT BUS 1B3C (EE-4K) EE-48 56 1011 1OW'C-10N'4A 1,2 9 1B4A 1B4A 2 480 VOLT BUS 1B4A (EE-4G) EE-4B 56 1011 10E'D-15S'SD 1.2,3,4,5 SFP 10 1B4B 1B4B 2 480 VOLT BUS 1949 (EE-4J) EE-4B 56 1011 1OE'D-12N'5B 1,2,3,5 11 1B4C 1B4C 2 480 VOLT BUS 1B4C (EE-4L) EE-4B 56 1011 15W'C-4N'4A 1,2,3,4,5 SFP 12 1A4 1A4-11 3 EREAKER UNIT FEEDER FOR RAW WATER PUMP AC-1OB EE-4A 56 1011 1A4 4 SFP 13 1A3 1A3 3 4.16KV BUS (EE-4C) EE-4A 56 1016 1 1W'C-18N'1A 1,2,3,4,5 SFP 14 1A4 1A4 3 4.16KV BUS (EE-4D) EE-4A 56 1016 16W'C-18N'lA 1,2.3.4,5 SFP 15 EE-4S EE-4S 4 INVERTER #1, EE-8P BYPASS TRANSFORMER EE 56 1011 OW'C-1 1N'6D none 16 T1B-3C T1B-3C 4 4160/480 TRANSFORMER BUS 113C EE 56 1011 7W'C-17N'4A 1,2 17 AC-3C AC-3C 5 COMPONENT COOLING WATER PUMP AC-CCW 69 1027 1W'N-3N'BA 3,4 SFP 18 AC-3B AC-3B 5 COMPONENT COOLING WATER PUMP AC-CCW 69 1027 W'N-4'S8A 3,4 SFP 19 CH-1A CH-1A 5 CHARGING PUMP CH 6 0991 5E'U-4N'6E 1,2,3 20 DG-2 FO-17-2 5 DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP FO-DG 64 1010 20WF-22N'1A 1,2,3,4,5 21 DG-2 FO-4A-2 5 D2 FUEL OIL TRANSFER PUMP #1 FO-DG 64 1012 3W'K-6S'2B 1,2.3,4,35 22 FW-10 FW-10 5 AUXILIARY FEEDWATER PUMP (TURBINE-DRIVEN)
Seismic Walkdown Checklist (SWC)                   SWC- 1 Equipment ID No.         AC-12B                    Equip. Class4 0, Other Equipment Description Raw Water Strainer Photographs Note: Equipment.                                                   Note: Lack of anchorthread engagement.
FW-AFW 19 0991 3W'C-1N'3A 4 23 FW-6 FW-6 5 AUXILIARY FEEDWATER PUMP (MOTOR-DRIVEN)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
FW-AFW 19 0992 4W'C-5S'4A 4 24 AC-10B AC-108 6 RAW WATER PUMP AC-RW INTK 0994 1E'CC-1N'103 3.4 SFP 25 AC-10D AC-10D 6 RAW WATER PUMP AC-RW INTK 0994 1E'CC-IN'104 3,4 SFP 26 HCV-474 HCV-474 7 SI-IA&B,2AB&CISI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE AC-CCW 6 0992 9WrT-2N'6E none SEP 27 HCV-484 HCV-484 7 SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE AC-CCW 4 0993 2E'E-22N'5B 4 28 HCV-489B HCV-489B 7 COMP COOLING HT EXCH AC-lA CCW OUTLET VALVE AC-CCW 4 0992 1OW'D-1N'6D 4,5 29 HCV-497 HCV-497 7 COMP CLG HT EXCHS AC-IA-D CCW BYPASS LINE ISOLATION VALVE AC-CCW 4 0991 2E'E-S'7A 4.5 30 TCV-893 TCV-893 7 AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE AC-CCW 72 1037 8WJ1-12N'7A none 31 HCV-2874A HCV-2874A 7 RAW WATER PUMPS DISCH HEADER ISOLATION VALVE AC-RW INTK 1001 6E'CC-4S'103 4,5 SFP 32 HCV-2875A HCV-2875A 7 RAW WATER PUMPS DISCH HEADER ISOLATION VALVE AC-RW INTK 1001 6E'CC-7N'103 4,5 SFP 33 HCV-2877A HCV-2877A 7 COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE AC-RW 18 0993 13E'D-12S'6D 4,5 SFP 34 HCV-2880A HCV-2880A 7 COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE AC-RW 18 0994 13E'D-6S'6D 4,5 SFP 35 HCV-2893 HCV-2893 7 RAW WATER TO CCW ISOLATION VALVE AC-RW 18 0993 13E'D-19S'6D 4,5 SFP 36 HCV-240 HCV-240 7 PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE CH CONT 1045 14W'DD-6N'Il 5 37 LCV-218-3 LCV-218-3 7 CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ &BORIC ACID SUPPLY VLV CH 7 0992 45W'T-2N'7B 1,2.3 EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 1 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NI I UD--Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class, 0. Other Equipment Description Raw Water Strainer Location:
 
Bldg. Intake Floor El. 994' Room, Area Intake Structure, 13W'BB-16N'104 Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 5 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: Y[    NR UI-Seismic Walkdown Checklist (SWC)                   SWC- 2 Equipment ID No.       AC-12B-M                  Equip. Class, 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Location: Bldg. Intake             Floor El. 999'           Room, Area Intake Structure, 13W'BB-16N'104 Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
Anchorage
YO NDl 2. Is the anchorage free of bent, broken, missing or loose hardware?Strainer base has four 1.25" diameter anchor bolts to concrete, all of which have a lack of thread engagement to their nuts (varies from 3/8" to 1"). Also, nut seems bent. CR 2012-10553 initiated.
: 1. Is the anchorage configuration verification required (i.e., is the item one     Y-I NZ of the 50% of SWEL items requiring such verification)?
: 3. Is the anchorage free of corrosion that is more than mild surface oxidation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?               YN NE] UEi N/A[:I
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YDl NO U-- N/AD-YO NDI UD1 N/AD]YM NDI UD1 N/AD IEnter the equipment class name from Appendix B: Classes of Equipment.
: 3. Is the anchorage free of corrosion that is more than mild surface               YN NDl ULi N/ADl oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 2 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE] UE]Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class2 0, Other Equipment Description Raw Water Strainer 5. Is the anchorage configuration consistent with plant documentation?
: 4. Is the anchorage free of visible cracks in the concrete near the                 YD ND U[:      N/As anchors?
YZ NE] UE] N/All (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
IEnter the equipment class name from Appendix B: Classes of Equipment.
The anchorage configuration is consistent with drawing 12545, Rev. 8 (File# 12107).6. Based on the above anchorage evaluations, is the anchorage free of YE] NZ UE]potentially adverse seismic conditions?
 
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 6 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ     NE-- UF-Seismic Walkdown Checklist (SWC)                   SWC- 2 Equipment ID No.         AC-12B-M                  Equip. Class2 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR
: 5. Is the anchorage configuration consistent with plant documentation?           YE-- NEI U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of             YZ NEi U-I potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y-I NEI- U-] N/AZ Not a soft target YE* NE I U[-- N/Ai    I
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[ NE] UE-] N/AE]Y[ NEI uF- N/All]YZ NE] Ul-- N/A[-]YN NE] UE 2 Enter the equipment class name from Appendix B: Classes of Equipment.
YE NEI    u-    N/A[D
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 3 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NFD U--Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class3 0, Other Equipment Description Raw Water Strainer Other Adverse Conditions
: 9. Do attached lines have adequate flexibility to avoid damage?
: 11. Have you looked for and found no other seismic conditions that could Y[ N[D ULi adversely affect the safety functions of the equipment?
Y[    N[-] u--IE
: 10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 7 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE NF-- UL-Seismic Walkdown Checklist (SWC)                   SWC- 2 Equipment ID No.         AC-12B-M                  Equip. Class3 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could             YN No-] Ui--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao V-4-0 Date: 8/17/2012 Alex Smerch _8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                                     Date: 8/17/2012 8.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 4 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN NE] UD--Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class4 0, Other Equipment Description Raw Water Strainer Photographs Note: Equipment.
                                                          .. z.*    .. :*..=.____8/17/2012 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Note: Lack of anchor thread engagement.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 8 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YIN NE]   U[
Seismic Walkdown Checklist (SWC)                   SWC- 2 Equipment ID No.         AC-12B-M                  Equip. Class4 0. Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Photographs Note: Equipment                                                   Note:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 5 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: Y[ NR UI-Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class, 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Location:
 
Bldg. Intake Floor El. 999' Room, Area Intake Structure, 13W'BB-16N'104 Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 9 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NR UD Seismic Walkdown Checklist (SWC)                   SWC- 3 Equipment ID No.       YCV-871H                  Equip. Class, 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Location: Bldg. MISL            Floor El. 1024'         Room, Area MISL, 10W'K-11S'1A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y-I NZ of the 50% of SWEL items requiring such verification)?
Anchorage
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y-I NZ of the 50% of SWEL items requiring such verification)?
YN NE] UEi N/A[:I 3. Is the anchorage free of corrosion that is more than mild surface YN NDl ULi N/ADl oxidation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NEil U-ij    N/AD
: 4. Is the anchorage free of visible cracks in the concrete near the YD ND U[: N/As anchors?IEnter the equipment class name from Appendix B: Classes of Equipment.
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ NDI UD N/AD--
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 6 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE-- UF-Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class2 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR 5. Is the anchorage configuration consistent with plant documentation?
oxidation?
YE-- NEI U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 4. Is the anchorage free of visible cracks in the concrete near the             YN ND UD N/AD&#xfd; anchors?
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ NEi U-I potentially adverse seismic conditions?
IEnter the equipment class name from Appendix B: Classes of Equipment.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
Not a soft target 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 10 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN    ND UD--
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y-I NEI- U-] N/AZNE I U[-- N/Ai I YE NEI u- N/A[D Y[ N[-] u--IE 2 Enter the equipment class name from Appendix B: Classes of Equipment.
Seismic Walkdown Checklist (SWC)                   SWC- 3 Equipment ID No.         YCV-871H                  Equip. Class2 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 7 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE NF-- UL-Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class3 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Other Adverse Conditions
: 5. Is the anchorage configuration consistent with plant documentation?           Y-I NDI    U[:] N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 11. Have you looked for and found no other seismic conditions that could YN No-] Ui--adversely affect the safety functions of the equipment?
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ NDI    u[:]
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[-- NDl U-'    N/AZ Damper is not a soft Target.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN NDI UD: N/A[:]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[-] N[:  UD-- N/AZ No attached lines.
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[   N[-] UD--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 11 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NDI    UD--
Seismic Walkdown Checklist (SWC)                   SWC- 3 Equipment ID No.         YCV-871H                  Equip. Class3 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could     YN NE] U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/17/2012 Alex Smerch 8.....
Evaluated by: John Kao                                                           Date: 8/14/12 84 LI-   ______- ___--____-__-_-__.------_8/14/12 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.
3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 8 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YIN NE] U[Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class4 0. Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Photographs Note: Equipment Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 12 OF 403 SEISMIC WALKDOWN CHECKLIST FoRM Sheet 4 of 4 Status: YIN ND U-I Seismic Walkdown Checklist (SWC)                   SWC- 3 Equipment ID No.         YCV-871H                 Equip. Class4 0. OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Photographs Note: Equipment.                                                   Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 9 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NR UD Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class, 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. MISL Floor El. 1024' Room, Area MISL, 10W'K-11S'1A Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 13 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NF-     UI-Seismic Walkdown Checklist (SWC)                   SWC- 4 Equipment ID No.       YCV-871H-20               Equip. Class, 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Location: Bldg. MISL               Floor El. 1020'         Room, Area MISL, 1W'K-11S'1A Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y-I NZ of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Anchorage
YZ NEil U-ij N/AD 3. Is the anchorage free of corrosion that is more than mild surface YZ NDI UD N/AD--oxidation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YDI   NO of the 50% of SWEL items requiring such verification)?
: 4. Is the anchorage free of visible cracks in the concrete near the YN ND UD N/AD&#xfd;anchors?IEnter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Y[    NDI UID N/ADl
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 10 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND UD--Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class2 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER 5. Is the anchorage configuration consistent with plant documentation?
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ NDI    uD- N/AD oxidation?
Y-I NDI U[:] N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ NDI u[:]potentially adverse seismic conditions?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Damper is not a soft Target.8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?No attached lines.10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[-- NDl U-' N/AZ YN NDI UD: N/A[:]Y[-] N[: UD-- N/AZ Y[ N[-] UD--2 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 11 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ ND I UD--Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class3 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could YN NE] U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/14/12 Alex Smerch LI-84______- ___--____-__-_-__.------_8/14/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 12 OF 403 SEISMIC WALKDOWN CHECKLIST FoRM Sheet 4 of 4 Status: YIN ND U-I Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class4 0. OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Photographs Note: Equipment.
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 13 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NF- UI-Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class, 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Location:
Bldg. MISL Floor El. 1020' Room, Area MISL, 1W'K-11S'1A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YDI NO of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Mild surface oxidation.
Mild surface oxidation.
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?Y[ NDI UID N/ADl YZ NDI uD- N/AD YZ NDI UD- N/AD I Enter the equipment class name from Appendix B: Classes of Equipment.
: 4. Is the anchorage free of visible cracks in the concrete near the               YZ NDI UD- N/AD anchors?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 14 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ Ni 1 UD Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class2 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID 5. Is the anchorage configuration consistent with plant documentation?
IEnter the equipment class name from Appendix B: Classes of Equipment.
Y-I NEI ULi N/A[(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
 
: 6. Based on the above anchorage evaluations, is the anchorage free of Y[ ND] uLI potentially adverse seismic conditions?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 14 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   Ni 1 UD Seismic Walkdown Checklist (SWC)                   SWC- 4 Equipment ID No.         YCV-871H-20               Equip. Class2 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 5. Is the anchorage configuration consistent with plant documentation?         Y-I NEI   ULi N/A[
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y] NDI UD N/AD-YZ NDI UD1 N/AD YZ ND- U-- N/ADl Y[ NEI UD-2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   ND] uLI potentially adverse seismic conditions?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 15 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y] NFi U-Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class3 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Other Adverse Conditions
Interaction Effects
: 11. Have you looked for and found no other seismic conditions that could YZ NEI U-I adversely affect the safety functions of the equipment?
: 7. Are soft targets free from impact by nearby equipment or structures?         Y] NDI    UD  N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YZ NDI UD1 N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ ND- U-- N/ADl
: 10. Based on the above seismic interaction evaluations, is equipment free       Y[  NEI UD-of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 15 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y] NFi     U-Seismic Walkdown Checklist (SWC)                   SWC- 4 Equipment ID No.         YCV-871H-20               Equip. Class3 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could     YZ NEI     U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao F-Date: 8/14/12 Alex Smerch I L, =-- 8/14/12 3 Enter the equipment class name fiom Appendix B: Classes of Equipment.
Evaluated by: John Kao F-                                                       Date: 8/14/12 8
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 16 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Nn U-Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class4 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Photographs Note: Equipment.
                                      -  */1'-m- =--                                 8/14/12 Alex Smerch I L, 3 Enter the equipment class name fiom Appendix B: Classes of Equipment.
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment, EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 17 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ NR URi Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class, 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Location:
 
Bldg. AUX Floor El. 1013' Room, Area 57, MCC-3B1 Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 16 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Nn U-Seismic Walkdown Checklist (SWC)                   SWC- 4 Equipment ID No.         YCV-871H-20               Equip. Class4 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Photographs Note: Equipment.                                                   Note:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
4 Enter the equipment class name from Appendix B: Classes of Equipment,
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
 
YD-- NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 17 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[   NR URi Seismic Walkdown Checklist (SWC)                   SWC- 5 Equipment ID No.       MCC-3B1-C2R               Equip. Class, 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Location: Bldg. AUX                 Floor El. 1013'         Room, Area 57, MCC-3B1 Manufacturer, Model, Etc. (optional but recommended)
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YO NDi U[-D N/AD-]YN ND] UnL N/AD YE] ND] UE] N/AN IEnter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 18 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NiD U-IF Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class2 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER 5. Is the anchorage configuration consistent with plant documentation?
Anchorage
YDI NI U-] N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 1. Is the anchorage configuration verification required (i.e., is the item one   YD--  NO of the 50% of SWEL items requiring such verification)?
: 6. Based on the above anchorage evaluations, is the anchorage free of Y[ NDI U[-D potentially adverse seismic conditions?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO NDi      U[-D N/AD-]
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 3. Is the anchorage free of corrosion that is more than mild surface             YN ND] UnL        N/AD oxidation?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 4. Is the anchorage free of visible cracks in the concrete near the               YE] ND] UE] N/AN anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YN ND: U[:] N/AD-YN ND] U[:] N/AD I YN NIL U-I N/AD YN N[ DU[-]2 Enter the equipment class name from Appendix B: Classes of Equipment.
IEnter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 19 OF 403 SEISMIC WALKIDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NF1 UD1 Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class3 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Other Adverse Conditions
 
: 11. Have you looked for and found no other seismic conditions that could YN NrD U-I adversely affect the safety functions of the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 18 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   NiD U-IF Seismic Walkdown Checklist (SWC)                   SWC- 5 Equipment ID No.         MCC-3B1-C2R               Equip. Class2 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER
: 5. Is the anchorage configuration consistent with plant documentation?           YDI NI     U-] N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   NDI U[-D potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YN ND: U[:] N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN ND] U[:] N/AD I and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN NIL U-I N/AD
: 10. Based on the above seismic interaction evaluations, is equipment free         YN N[DU[-]
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 19 OF 403 SEISMIC WALKIDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NF1 UD1 Seismic Walkdown Checklist (SWC)                     SWC- 5 Equipment ID No.         MCC-3B1-C2R               Equip. Class3 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN NrD   U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch Date: 8/16/2012 John Kao W-8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch                                                           Date: 8/16/2012 John Kao               W-                                               8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 20 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NF-- Ut Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class4 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 20 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NF--   Ut Seismic Walkdown Checklist (SWC)                   SWC- 5 Equipment ID No.         MCC-3B1-C2R               Equip. Class4 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Photographs Note: Equipment.                                                   Note:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 21 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND-- UD-Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. AUX Floor El. 1011' Room, Area 56, 1OW'C-21N'5B Manufacturer, Model, Etc. (optional but recommended)
 
GE Type AKD-5 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 21 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND-- UD-Seismic Walkdown Checklist (SWC)                   SWC- 6 Equipment ID No.       1B3A                     Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 1OW'C-21N'5B Manufacturer, Model, Etc. (optional but recommended)             GE Type AKD-5 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YO NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?5. Is the anchorage configuration consistent with plant documentation?(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 1. Is the anchorage configuration verification required (i.e., is the item one   YO NO of the 50% of SWEL items requiring such verification)?
YO NO UD N/AD YN NI UrII N/AD-YO ND UD N/AD YO ND UD N/A[IEnter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO NO UD N/AD
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 22 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YM N[- U-I Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3A (EE-4F)6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface             YN NI UrII N/AD-oxidation?
YE NDO U Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 4. Is the anchorage free of visible cracks in the concrete near the               YO ND UD N/AD anchors?
YN NDI U[-] N/A[-]8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NO UrII N/AD and masonry block walls not likely to collapse onto the equipment?
: 5. Is the anchorage configuration consistent with plant documentation?           YO ND UD N/A[
: 9. Do attached lines have adequate flexibility to avoid damage?YM ND U[-- N/AD 10. Based on the above seismic interaction evaluations, is equipment free YZ ND U-of potentially adverse seismic interaction effects?Other Adverse Conditions
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 11. Have you looked for and found no other seismic conditions that could YZ NDI UZ adversely affect the safety functions of the equipment?
IEnter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 22 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YM N[-     U-I Seismic Walkdown Checklist (SWC)               SWC- 6 Equipment ID No.     1B3A                   Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3A (EE-4F)
: 6. Based on the above anchorage evaluations, is the anchorage free of         YE NDO U potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?       YN NDI U[-] N/A[-]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NO UrII N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?               YM ND U[-- N/AD
: 10. Based on the above seismic interaction evaluations, is equipment free     YZ ND U-of potentially adverse seismic interaction effects?
Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ NDI     UZ adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
The following items are not a seismic concern but were noted on the walkdowns:
The following items are not a seismic concern but were noted on the walkdowns:
Terminations 13, 14, 15 on 1B3A-101 (not coming in from side) see photo.(B) Silver oxide outside cable connection missing (not part of contact surface) in 1B3A-103.(A, B, C) Silver oxide outside cable connection missing (not part contact surface).
Terminations 13, 14, 15 on 1B3A-101 (not coming in from side) see photo.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 23 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[ ND UR-I Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3A (EE-4F)Evaluated by: .Russ Placke Ashwin Patel Date: 10/17/2012 10/17/2012 EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 24 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YN N-- UD Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)Note: View showing wiring for terminations 13, 14 and 15 not coming in from the side on 1B3A-101, Re. vn&w U1i Ifll (JUPwriul Uri EA12-021, Rev. I ATTACHMENT 11.2 PAGE 25 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YZ ND- UL-I Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)Note: wiiver oxiae missing on b Tor pane I Note: wiiver oxiae missing on A, b, u Tor IB3A-103.
(B) Silver oxide outside cable connection missing (not partof contact surface) in 1B3A-103.
panel IB3A-104.
(A, B, C) Silver oxide outside cable connection missing (not partcontact surface).
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 26 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: YZ NFD UFI Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. 1B3B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)Location:
 
Bldg. AUX Floor El. 1011' Room, Area 56, IOWC'-9N'5B Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 23 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[   ND   UR-I Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A                 Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3A (EE-4F)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Evaluated by: .Russ Placke                                             Date: 10/17/2012 Ashwin Patel                                                  10/17/2012
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
 
Y[i NM 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 24 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YN N--     UD Seismic Walkdown Checklist (SWC)       SWC- 6 Equipment ID No. 1B3A             Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?5. Is the anchorage configuration consistent with plant documentation?(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Re. vn&w U1iIfll (JUPwriul Uri                    Note: View showing wiring for terminations 13, 14 and 15 not coming in from the side on 1B3A-101,
YN ND-] U- N/Ar-Y[ NDi UD N/AFD Y[Z NDi UD- N/A[-]YI- NDi uID N/A[K I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 27 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND- UD-Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. IB3B Equip. Class 1 2, LOW VOLTAGE SWlTCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3B (EE-4H)6. Based on the above anchorage evaluations, is the anchorage free of YX N[il UD-potentially adverse seismic conditions?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 25 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YZ   ND- UL-I Seismic Walkdown Checklist (SWC)       SWC- 6 Equipment ID No. 1B3A               Equip. Class 1 2.LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Note: wiiver oxiae missing on b Tor pane     I     Note: wiiver oxiae missing on A, b, u Tor IB3A-103.                                           panel IB3A-104.
Y[ NE-] U[:I N/AD-]8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NEl UDI N/A--and masonry block walls not likely to collapse onto the equipment?
 
: 9. Do attached lines have adequate flexibility to avoid damage? Y[ ND] UD] N/AD]10. Based on the above seismic interaction evaluations, is equipment free YZ ND UDl of potentially adverse seismic interaction effects?Other Adverse Conditions
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 26 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: YZ NFD UFI Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. 1B3B                             Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)
: 11. Have you looked for and found no other seismic conditions that could YZ NDI uD-adversely affect the safety functions of the equipment?
Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, IOWC'-9N'5B Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[i NM of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YN ND-] U-      N/Ar-
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[    NDi  UD N/AFD oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the               Y[Z NDi UD- N/A[-]
anchors?
: 5. Is the anchorage configuration consistent with plant documentation?           YI- NDi uID N/A[K (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
IEnter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 27 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND- UD-Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. IB3B                         Equip. Class 1 2, LOW VOLTAGE SWlTCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3B (EE-4H)
: 6. Based on the above anchorage evaluations, is the anchorage free of       YX N[il UD-potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?     Y[   NE-] U[:I N/AD-]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[   NEl UDI N/A--
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?             Y[   ND] UD] N/AD]
: 10. Based on the above seismic interaction evaluations, is equipment free     YZ ND UDl of potentially adverse seismic interaction effects?
Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could     YZ NDI uD-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Danger tags noted on cubicle 300B and ground lug remains on frame although wire has been cut and abandoned in place.Danger tags noted on cubicle 303F.
Dangertags noted on cubicle 300B and ground lug remains on frame although wire has been cut and abandonedin place.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 28 OF 403 SEISMIC WALKDON CHECKUST FORM Sheet 3 of 5 Seimic Waikdovn Checklist (SWC) SWCo 7 Equipmet ID No. ___ Equip Class PANELS Equipmet Desr~tio 80V BUS 1P. --4Hjt Evetuted by: A i aelz tu~: YM 1'~J U 1 ThLYQLT~ SW~j~ B AKER_______ 11/13/2012 EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 29 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ N-] UI-I Seismic Walkdown Checklist (SWC) SWC- 7 Eq'uipment ID No. IB3B Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)Photographs Nowe: uanger tags snown uispiayeu in rront or cubicle 300.
Dangertags noted on cubicle 303F.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 30 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN NEI- U--Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. 1B3B Equip. Class 1 2 LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)Note: Exterior view of all cubicles.Note: Back of cubicle 301.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 31 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 6 Status: Y] NEil Ur--Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)Location:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 28 OF 403 SEISMIC WALKDON CHECKUST FORM Sheet 3 of 5 tu~: YM 1'~J U1 Seimic Waikdovn Checklist (SWC)   SWCo 7 Equipmet ID No.     ___         Equip Class 2*
Bldg. AUX Floor El. 1011' Room, Area 56, 1OW'C-ION'4A Manufacturer, Model, Etc. (optional but recommended)
ThLYQLT~      SW~j~      B        AKER PANELS Equipmet Desr~tio   80V   BUS 1P. 4Hjt Evetuted by:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Ai aelz
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YZ NOi-of the 50% of SWEL items requiring such verification)?
_______        11/13/2012
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 29 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ N-] UI-I Seismic Walkdown Checklist (SWC) SWC- 7 Eq'uipment ID No. IB3B               Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)
Photographs Nowe: uangertags snown uispiayeu in rrontor cubicle 300.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 30 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN NEI-   U--
Seismic Walkdown Checklist (SWC)       SWC- 7 Equipment ID No. 1B3B               Equip. Class1 2 LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)
Note: Exterior view of all cubicles.               Note: Back of cubicle 301.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 31 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 6 Status: Y] NEil Ur--
Seismic Walkdown Checklist (SWC)                   SWC- 8 Equipment ID No.       1B3C                     Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)
Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 1OW'C-ION'4A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
: 1. Is the anchorage configuration verification required (i.e., is the item one   YZ NOi-of the 50% of SWEL items requiring such verification)?
IEnter the equipment class name from Appendix B: Classes of Equipment.
IEnter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 32 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 6 Status: YN NF] U-i Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class' 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)2. Is the anchorage free of bent, broken, missing or loose hardware?
 
Y[ NEil Ut-] N/Ai-I Anchorage consists of welds between the bus frame and a metal plate embedded in the concrete floor on both the front and back sides of the bus. Each cubicle has 2 plug welds on the front side and 3 plug welds on the back side with the exception of the 2 center cubicles which have no welds in the back. Upon examination it was observed that for some of the welds there was not complete penetration or there were gaps between the weld material and the base of the bus. Portions of the base of the cabinent were not completely observable due to a fire resistant coating obstructing view. Below is a summary of the deficient welds for each cubicle: Cubicle 500 -50% of contact with bus in one of the back welds.Cubicle 502 -70% of contact with bus in one of the back welds.Cubicle 503 -50% of contact with bus in one of the front welds.Cubicle 503 -Back of cubicle is covered by fire-resistant coating, but SEWS for IB3C shows that there is no anchorage existing underneath.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 32 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 6 Status: YN NF] U-i Seismic Walkdown Checklist (SWC)             SWC- 8 Equipment ID No. 1B3C                   Equip. Class' 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)
Cubicle 504 -30% of contact with bus in one of the front welds.Cubicle 504 -Back of cuble is covered by fire-resistant coating, but SEWS for 1B3C shows that there is no anchorage existing underneath.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?         Y[   NEil Ut-] N/Ai-I Anchorage consists of welds between the bus frame and a metal plate embedded in the concrete floor on both the front and back sides of the bus. Each cubicle has 2 plug welds on the front side and 3 plug welds on the back side with the exception of the 2 center cubicles which have no welds in the back. Upon examination it was observed that for some of the welds there was not complete penetrationor there were gaps between the weld material and the base of the bus. Portions of the base of the cabinent were not completely observable due to a fire resistantcoating obstructing view. Below is a summary of the deficient welds for each cubicle:
Cubicle 506 -95% of contact with bus in front left weld.Cubicle 506 -50% of contact with bus in front right weld.Cubicle 506 -Unknown amount of weld in back cubicle as it is covered by fire-resistant coating.Review of SEWS package for IB3C noted that the quality of welds were inspected by a weld specialist as cross referenced in the SEWS package of 1A3. Therefore the welds are judged to be acceptable.
Cubicle 500 - 50% of contact with bus in one of the back welds.
The welds that are not visible are judged to be adequate based on the consistency of welds observed in the remaining cubicles and as noted in the SEWS report.3. Is the anchorage free of corrosion that is more than mild surface YX Nt] Ut] N/At]oxidation?
Cubicle 502 - 70% of contact with bus in one of the back welds.
There appears to be mild oxidation on some of the welds but no loss of material.4. Is the anchorage free of visible cracks in the concrete near the Y[ Nt:] Ut] N/At]anchors?There were no cracks observed on the concrete surface.
Cubicle 503 - 50% of contact with bus in one of the front welds.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 33 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 6 Status: YZ Nni- U-Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3C (EE-4K)5. Is the anchorage configuration consistent with plant documentation?
Cubicle 503 - Back of cubicle is covered by fire-resistantcoating, but SEWS for IB3C shows that there is no anchorageexisting underneath.
YN NEI- Ur-I N/AL-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Cubicle 504 - 30% of contact with bus in one of the front welds.
Anchorage was verified against SEWS Package for IB3C Rev. 0 6. Based on the above anchorage evaluations, is the anchorage free of YZ N[] UD]potentially adverse seismic conditions?
Cubicle 504 - Back of cuble is covered by fire-resistantcoating, but SEWS for 1B3C shows that there is no anchorage existing underneath.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Cubicle 506 - 95% of contact with bus in front left weld.
Y[K N[] U-I N/AD--The only nearby equipment is a transformer which is connected to the bus and therefore could not move out of phase with the bus and cause damage during an earthquake.
Cubicle 506 - 50% of contact with bus in front right weld.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEI UDI N/ADl and masonry block walls not likely to collapse onto the equipment?
Cubicle 506 - Unknown amount of weld in back cubicle as it is covered by fire-resistantcoating.
Review of SEWS package for IB3C noted that the quality of welds were inspected by a weld specialistas cross referenced in the SEWS package of 1A3. Therefore the welds are judged to be acceptable.
The welds that are not visible arejudged to be adequate based on the consistency of welds observed in the remaining cubicles and as noted in the SEWS report.
: 3. Is the anchorage free of corrosion that is more than mild surface         YX Nt] Ut] N/At]
oxidation?
There appears to be mild oxidation on some of the welds but no loss of material.
: 4. Is the anchorage free of visible cracks in the concrete near the         Y[   Nt:] Ut] N/At]
anchors?
There were no cracks observed on the concrete surface.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 33 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 6 Status: YZ Nni- U-Seismic Walkdown Checklist (SWC)                 SWC- 8 Equipment ID No.       1B3C                   Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3C (EE-4K)
: 5. Is the anchorage configuration consistent with plant documentation?         YN NEI- Ur-I N/AL-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage was verified against SEWS Package for IB3C Rev. 0
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ N[] UD]
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?       Y[K N[] U-I N/AD--
The only nearby equipment is a transformerwhich is connected to the bus and therefore could not move out of phase with the bus and cause damage during an earthquake.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YZ NEI     UDI N/ADl and masonry block walls not likely to collapse onto the equipment?
All overhead equipment inlcuding lighting and cable trays are well supported.
All overhead equipment inlcuding lighting and cable trays are well supported.
: 9. Do attached lines have adequate flexibility to avoid damage? Y[ NF-] UD- N/AD All attached lines either have nearby 90 degree elbows giving them flexibility or are flexible cables themselves.
: 9. Do attached lines have adequate flexibility to avoid damage?               Y[   NF-] UD- N/AD All attached lines either have nearby 90 degree elbows giving them flexibility or are flexible cables themselves.
: 10. Based on the above seismic interaction evaluations, is equipment free Y[ NiD UFD of potentially adverse seismic interaction effects?Other Adverse Conditions
: 10. Based on the above seismic interaction evaluations, is equipment free       Y[   NiD UFD of potentially adverse seismic interaction effects?
: 11. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment?
Other Adverse Conditions
There were some sheet metal screws observed that were not screwed to anything but a single piece of sheet metal and therefore not providing any function, but these were deemed not to be a seismic concern as they have negligible mass.YN NEI UD EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 34 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 6 Status: YV N] U[:71 Seismic Walkdown Checklist SWC SWCy 8 Equipment ID No, 13C EquipL C 2ass RAND"FAKEREquipment Description A LT8Bi1B3j&
: 11. Have you looked for and found no other seismic conditions that could       YN NEI UD adversely affect the safety functions of the equipment?
7 K C. n2m (Additional pages may te added as necesa y)E~aIuated by: Ao ______________________Dte  
There were some sheet metal screws observed that were not screwed to anything but a single piece of sheet metal and therefore not providing any function, but these were deemed not to be a seismic concern as they have negligible mass.
>2 7/27C'h2 n'aCal, n_ _/y .... ...... ... 2 ... .... .....
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 35 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 6 Status: Y] N-i Ur-i Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3C (EE-4K)-""" Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 34 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 6 Status: YV N] U[:71 Seismic Walkdown Checklist SWC                     SWCy 8 Equipment ID No,   13C                         EquipLC      2ass                         RAND"FAKER PANEL*
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 36 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 6 of 6 Status: YZ NF- Ui-Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)Note:
Equipment Description A         LT8Bi1B3j&     7         K C. n2m   (Additional   pages may te added as necesa y)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 37 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: Y[ NOI- UL-]Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. IB4A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)Location:
E~aIuated by: Ao                 ______________________Dte                             >2 7/27C'h2 n'aCal, n_     _
Bldg. AUX Floor El. 1011' Room, Area 56, IOE'D-15S'6D Manufacturer, Model, Etc. (optional but recommended)
                                          /y                       .... ...... ...     *J        2 ... .... .....
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 35 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 6 Status: Y]   N-i Ur-i Seismic Walkdown Checklist (SWC)       SWC- 8 Equipment ID No. 1B3C               Equip. Class1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3C (EE-4K)
Y[-1 NO 2. Is the anchorage free of bent, broken, missing or loose hardware?Only able to visibly identify 2 plug welds in the front of cubicle 205. All remaining anchor point plug welds are covered by cabinet plating. The cabinet had been refurbished in 2012 and seismic calculations have been performed by NLI. A corresponding SQUG walkdown had been performed as stated by Jim Carlson of OPPD, therefore, the remaining cubicles are judged to be adequate.3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Note:
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 36 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 6 of 6 Status: YZ NF- Ui-Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C               Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)
Note:
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 37 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: Y[   NOI- UL-]
Seismic Walkdown Checklist (SWC)                   SWC- 9 Equipment ID No.       IB4A                     Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)
Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, IOE'D-15S'6D Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-1 NO of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO NEI U-i N/A-]
Only able to visibly identify 2 plug welds in the front of cubicle 205. All remaining anchorpoint plug welds are covered by cabinet plating. The cabinet had been refurbished in 2012 and seismic calculationshave been performed by NLI. A correspondingSQUG walkdown had been performed as stated by Jim Carlson of OPPD, therefore, the remaining cubicles arejudged to be adequate.
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ NEI U-I N/AD--
oxidation?
Refer to question #2. Of the welds that were visible, there was no evidence of corrosion.
Refer to question #2. Of the welds that were visible, there was no evidence of corrosion.
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?There were no cracks identified in the floors surrounding the equipment.
: 4. Is the anchorage free of visible cracks in the concrete near the               YOr'NEI UL- N/AD-anchors?
: 5. Is the anchorage configuration consistent with plant documentation?(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
There were no cracks identified in the floors surrounding the equipment.
N/A YO NEI U-i N/A-]YZ NEI U-I N/AD--YOr' NEI UL- N/AD-YD-] N-- uM N/A[Enter the equipment class name from Appendix B: Classes of Equipment.
: 5. Is the anchorage configuration consistent with plant documentation?             YD-] N--  uM N/A[
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 38 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y9 NR-] UL-I Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)6. Based on the above anchorage evaluations, is the anchorage free of YZ Niln U[I potentially adverse seismic conditions?
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Refer to question #2.Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
N/A Enter the equipment class name from Appendix B: Classes of Equipment.
YZ NDi Ur N/AD: There are overhead light fixtures in the vicinity with uncaged fluorescent bulbs. The light fixture is well overhead and does not pose a credible interaction with the equipment.
 
The light bulb is not a signficant source since it is brittle with an extremely small mass relative to the cabinet.The light fixtures also have open S-hooks, however the S-hooks have a wire tieing them closed, therfore providing redundancy.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 38 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y9 NR-] UL-I Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A                         Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ Niln U[I potentially adverse seismic conditions?
Refer to question #2.
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YZ NDi   Ur   N/AD:
There are overhead light fixtures in the vicinity with uncaged fluorescent bulbs. The light fixture is well overhead and does not pose a credible interaction with the equipment. The light bulb is not a signficant source since it is brittle with an extremely small mass relative to the cabinet.
The light fixtures also have open S-hooks, however the S-hooks have a wire tieing them closed, therfore providing redundancy.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YX NDI UD N/AD and masonry block walls not likely to collapse onto the equipment?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YX NDI UD N/AD and masonry block walls not likely to collapse onto the equipment?
Cable tray is supported overhead.
Cable tray is supportedoverhead. The cable tray supports are well supportedand there is sufficient vertical clearancebetween the top of the cabinet and the bottom of the cable tray support. There is also piping overhead which is well supported and brace.
The cable tray supports are well supported and there is sufficient vertical clearance between the top of the cabinet and the bottom of the cable tray support. There is also piping overhead which is well supported and brace.9. Do attached lines have adequate flexibility to avoid damage? YZ ND] UD-- N/AD-Flexible cables feed into the top of the cabinet Conduit is also connected to the top of the cabinet and contains multiple bends to promote flexibility.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ ND] UD-- N/AD-Flexible cables feed into the top of the cabinet Conduit is also connected to the top of the cabinet and contains multiple bends to promote flexibility.
: 10. Based on the above seismic interaction evaluations, is equipment free YN ND&#xfd; UDl of potentially adverse seismic interaction effects?Other Adverse Conditions
: 10. Based on the above seismic interaction evaluations, is equipment free       YN ND&#xfd; UDl of potentially adverse seismic interaction effects?
: 11. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment?
Other Adverse Conditions
Interconnecting bolts were missing which connect panels on IB4A with 69/1IB4A.
: 11. Have you looked for and found no other seismic conditions that could         YEK NEI UD&#xfd; adversely affect the safety functions of the equipment?
It appears as if the bolts were there once. There are 3 bolts one side and 4 the other side remaining, and the stability and connection is judged to be adequate.
Interconnectingbolts were missing which connect panels on IB4A with 69/1IB4A. It appears as if the bolts were there once. There are 3 bolts one side and 4 the other side remaining,and the stabilityand connection is judged to be adequate. CR 2013-07194 was issued to resolve the issue.
CR 2013-07194 was issued to resolve the issue.YEK NEI UD&#xfd; EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 39 OF 403 SEISMIC WAL~DOWN CHECKLiST FORM Sh 3of5 ot m~cW I down Chockliol E3nuQrnent di) N~ ___________
 
Equipfm~nt U sc~ip~on 4~ VC4 ot~tU12 '~ __ N~J U~2~(2 Comments (Addt 2ora p~; m~T be ade :o s &~i pro vidh tg interconnnechbn the tLI4A-~4 some einpty holes tnt &rtercarin angles were pPmvdled w,# manyt tmore OOJtK Cubkcie BTof34A was eel opened sdn oasod on obsecvahons of renaining cubi Ea at lb :~c ye es ______________
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 39 OF 403 SEISMIC WAL~DOWN CHECKLiST FORM Sh     3of5 ot~tU12    '~ __  N~J U~
it (all ~' 4.7.3 ~e,7Q~$)
ot m~cW I down Chockliol                           2 E3nuQrnent di) N~     ___________                                 ~(2 Equipfm~nt U sc~ip~on       4~ VC4 Comments (Addt2ora p~;             m~T be ade
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 40 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ NFi- U[-]Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4A (EE-4G)Photouraphs Note: Back view of equipment Note: Front view of equipment.
:o     s
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 41 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN N-Il Ui-Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)
                                                &~i pro vidh tg interconnnechbn ur*d the e*nec~r tLI4A-~4 *ed some einpty holes tnt &rtercarin angles were pPmvdled w,# manyt tmore OOJtK Cubkcie BTof34A was eel opened sdn*,>e; oasod on obsecvahons of th*e renaining cubi Ea   at lb   :~c ye     es                         ______________                               7 it   (all         ~' 4*.                                             .3 ~e,7Q~$)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 42 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: YX N-I U--i Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. 1B4B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)Location:
 
Bldg. AUX Floor El. 1011' Room, Area 56, 10E'D-12N'5B Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 40 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ NFi-   U[-]
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Seismic Walkdown Checklist (SWC)       SWC- 9 Equipment ID No. 1B4A             Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4A (EE-4G)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
Photouraphs Note: Back view of equipment                       Note: Front view of equipment.
YO NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
 
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?5. Is the anchorage configuration consistent with plant documentation?(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 41 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN N-Il Ui-Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A                 Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)
YO NEI UD N/AD YEK ND UD N/AD YO ND ui- N/A-YD-- ND- UD-- N/A[n Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 43 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND-1 UD Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. IB4B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)6. Based on the above anchorage evaluations, is the anchorage free of YE ND UD-potentially adverse seismic conditions?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 42 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: YX N-I U--i Seismic Walkdown Checklist (SWC)                   SWC- 10 Equipment ID No.       1B4B                     Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 10E'D-12N'5B Manufacturer, Model, Etc. (optional but recommended)
Y[ ND] U[] N/AD]8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YE N[-] U[LI N/A[--and masonry block walls not likely to collapse onto the equipment?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 9. Do attached lines have adequate flexibility to avoid damage? Y[ ND] UD] N/AD-10. Based on the above seismic interaction evaluations, is equipment free Y[ ND: UD]of potentially adverse seismic interaction effects?Other Adverse Conditions
Anchorage
: 11. Have you looked for and found no other seismic conditions that could YZ ND] UD1 adversely affect the safety functions of the equipment?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YO NO of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO NEI UD N/AD
: 3. Is the anchorage free of corrosion that is more than mild surface             YEK ND UD N/AD oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the               YO ND ui-        N/A-anchors?
: 5. Is the anchorage configuration consistent with plant documentation?           YD--  ND- UD-- N/A[n (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 43 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND-1 UD Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. IB4B                       Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)
: 6. Based on the above anchorage evaluations, is the anchorage free of         YE ND UD-potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?     Y[   ND] U[] N/AD]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YE N[-] U[LI N/A[--
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?             Y[   ND] UD] N/AD-
: 10. Based on the above seismic interaction evaluations, is equipment free     Y[   ND:   UD]
of potentially adverse seismic interaction effects?
Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ ND] UD1 adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Danger tags noted in cubicle 404F. This has no adverse impact on the equipment.
Dangertags noted in cubicle 404F. This has no adverse impact on the equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 44 OF 403 11/13/2012-s ''2.-A.qhwin Patel EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 45 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ NI D UDl Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. 1B4B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)Nowe:
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 46 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YZ ND I UD Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. 1B4B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4B (EE-4J)
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 44 OF 403
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 47 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ Nr-] UI-Seismic Walkdown Checklist (SWC) SWC- 11 Equipment ID No. 1B4C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)Location:
              -s ''2.-
Bldg. AUX Floor El. 1011' Room, Area 56, 15W'C-4N'4A Manufacturer, Model, Etc. (optional but recommended)
A.qhwin Patel         11/13/2012
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[ Ni--of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 45 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ NI D UDl Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. 1B4B                 Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Nowe:
YN NE] U[I- N/Al[I Anchorage consists of welds between the bus frame and a metal plate embedded in the concrete floor on both the front and back sides of the bus. Each cubicle has 2 plug welds on the front side and 3 plug welds on the back side with the exception of the end cubicles which have only 1 back weld. Upon examination it was observed that for some of the welds that there was not complete penetration or there were gaps between the weld material and the base of the bus. Below is a summary of the deficient welds for each cubicle: Cubicle 600 -95% of contact with bus in one of the front welds.Cubicle 602 -70% of contact with bus in one of the front welds.Cubicle 602 -60% of contact with bus in one of the back welds.Cubicle 603 -20% of contact with bus in one of the back welds.Cubicle 604 -95% of contact with bus in one of the front welds.Review of SEWS package for 1B4C noted that the quality of welds were inspected by a weld specialist as cross referenced in the SEWS package of 1A3. Therefore the welds are judged to be acceptable.
 
: 3. Is the anchorage free of corrosion that is more than mild surface YZ NEI U0] N/AE]oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 46 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YZ NDI    UD Seismic Walkdown Checklist (SWC)     SWC- 10 Equipment ID No. 1B4B             Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4B (EE-4J)
There appears to be mild oxidation on some of the welds but no loss of material.I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 48 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND-- UD--Seismic Walkdown Checklist (SWC) SWC- 11 Equipment ID No. 1B4C Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)4. Is the anchorage free of visible cracks in the concrete near the anchors?There were no cracks observed on the concrete surface.5. Is the anchorage configuration consistent with plant documentation?(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 47 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ Nr-]   UI-Seismic Walkdown Checklist (SWC)                   SWC- 11 Equipment ID No.         1B4C                     Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)
Anchorage was verified against SEWS Package for 1B4C Rev. 0 6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?
Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 15W'C-4N'4A Manufacturer, Model, Etc. (optional but recommended)
Y[ ND-] UD1 N/AD1 Y[ ND-- UD1 N/AD:]Y[ ND:] U[--Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
All equipment nearby the bus is well secured and poses no risk of seismic interaction.
Anchorage
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 1. Is the anchorage configuration verification required (i.e., is the item one     Y[   Ni--
of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?               YN NE] U[I- N/Al[I Anchorage consists of welds between the bus frame and a metal plate embedded in the concrete floor on both the front and back sides of the bus. Each cubicle has 2 plug welds on the front side and 3 plug welds on the back side with the exception of the end cubicles which have only 1 back weld. Upon examination it was observed that for some of the welds that there was not complete penetrationor there were gaps between the weld materialand the base of the bus. Below is a summary of the deficient welds for each cubicle:
Cubicle 600 -   95% of contact with   bus in one of the front welds.
Cubicle 602 -   70% of contact with   bus in one of the front welds.
Cubicle 602 -   60% of contact with   bus in one of the back welds.
Cubicle 603 -   20% of contact with   bus in one of the back welds.
Cubicle 604 -   95% of contact with   bus in one of the front welds.
Review of SEWS package for 1B4C noted that the quality of welds were inspected by a weld specialistas cross referenced in the SEWS package of 1A3. Therefore the welds arejudged to be acceptable.
: 3. Is the anchorage free of corrosion that is more than mild surface               YZ NEI U0] N/AE]
oxidation?
There appears to be mild oxidation on some of the welds but no loss of material.
I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 48 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND-- UD--
Seismic Walkdown Checklist (SWC)                 SWC- 11 Equipment ID No.       1B4C                   Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)
: 4. Is the anchorage free of visible cracks in the concrete near the           Y[  ND-] UD1 N/AD1 anchors?
There were no cracks observed on the concrete surface.
: 5. Is the anchorage configuration consistent with plant documentation?         Y[  ND-- UD1 N/AD:]
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage was verified against SEWS Package for 1B4C Rev. 0
: 6. Based on the above anchorage evaluations, is the anchorage free of         Y[   ND:] U[--
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?       Y[Z NDI UD- N/ADl All equipment nearby the bus is well secured and poses no risk of seismic interaction.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   Y[  NDI UD] N/AD:]
and masonry block walls not likely to collapse onto the equipment?
All overhead equipment inicuding lighting and cable trays are well supported.
All overhead equipment inicuding lighting and cable trays are well supported.
: 9. Do attached lines have adequate flexibility to avoid damage?All attached lines either have nearby 90 degree elbows giving them flexibility or are flexible cables themselves.
: 9. Do attached lines have adequate flexibility to avoid damage?               YZ NDI UD- N/AD:
: 10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[Z NDI UD- N/ADl Y[ NDI UD] N/AD:]YZ NDI UD- N/AD: YZ NEI UD EAI2-021, Rev. 1 ATTACHMENT 11.2 PAGE 49 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Seismic Walkdown Checklist  
All attachedlines either have nearby 90 degree elbows giving them flexibility or are flexible cables themselves.
([SWO) SWCo 11 Eq iD No Equip asc 2, 2 RANELS Eq ipmei~ Descripton 480 VoC l US 1842 (FF4! T 0ther Adverse Condttfor 11 Hav yu iooked for and foun nri no other sensrmic ad erselv affect tfhe safety funct ocs of tce eqtrDr ntn?St~tus~L N Jj C~mment (AdditIonal pages may be added as necetsar Ait EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 50 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NR UL-Seismic Walkdown Checklist (SWC) SWC- 11 Equipment ID No. 1B4C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)Photographs Note: Equipment EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 51 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YM NR U-I Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class, 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description BREAKER UNIT FEEDER FOR RAW WATER PUMP AC-10B Location:
: 10. Based on the above seismic interaction evaluations, is equipment free       YZ NEI UD of potentially adverse seismic interaction effects?
Bldg. AUX Floor El. 1011' Room, Area 56, 1A4 Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EAI2-021, Rev. 1 ATTACHMENT 11.2 PAGE 49 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 St~tus~L N      Jj Seismic Walkdown Checklist ([SWO)               SWCo 11 Eq ipmen* iD No       8*4,                              asc Equip *'..... 2, 2 RANELS Eq ipmei~ Descripton       480 VoCl T  US 1842 (FF4!
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
0ther Adverse Condttfor 11 Hav yu iooked for and foun nri no other sensrmic cond~t*
YO NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
ad erselv affect tfhe safety funct ocs of tce eqtrDr ntn?
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?Y[Z ND UDJ N/AD--YO ND UDl N/AD-YO ND U[:] N/AD-IEnter the equipment class name from Appendix B: Classes of Equipment.
C~mment     (AdditIonal pages may be added as necetsar Ait
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 52 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE NEI UD Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B 5. Is the anchorage configuration consistent with plant documentation?
 
YE] NE] U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 50 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NR UL-Seismic Walkdown Checklist (SWC) SWC- 11 Equipment ID No. 1B4C                 Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ NI- UE-potentially adverse seismic conditions?
Photographs Note: Equipment
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 51 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YM NR U-I Seismic Walkdown Checklist (SWC)                   SWC- 12 Equipment ID No.       1A4-11                   Equip. Class, 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description       BREAKER UNIT FEEDER FOR RAW WATER PUMP AC-10B Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 1A4 Manufacturer, Model, Etc. (optional but recommended)
There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
CR 2012-10423 has been initiated.
Anchorage
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YM NE]I UE N/AE]YE-] NO UE] N/AE]YZ NEI UE] N/AE]YEi NO UE]
: 1. Is the anchorage configuration verification required (i.e., is the item one   YO NO of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 53 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN ND1 U--Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B Other Adverse Conditions
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Y[Z ND UDJ N/AD--
: 11. Have you looked for and found no other seismic conditions that could YZ NEI Ui--adversely affect the safety functions of the equipment?
: 3. Is the anchorage free of corrosion that is more than mild surface             YO ND UDl N/AD-oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the             YO ND U[:] N/AD-anchors?
IEnter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 52 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE NEI UD Seismic Walkdown Checklist (SWC)               SWC- 12 Equipment ID No.     1A4-11                 Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B
: 5. Is the anchorage configuration consistent with plant documentation?         YE] NE] U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of         YZ NI- UE-potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?       YM NE]I UE      N/AE]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YE-] NO UE] N/AE]
and masonry block walls not likely to collapse onto the equipment?
There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.
: 9. Do attached lines have adequate flexibility to avoid damage?               YZ NEI UE] N/AE]
: 10. Based on the above seismic interaction evaluations, is equipment free       YEi NO UE]
of potentially adverse seismic interaction effects?
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 53 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN ND1 U--
Seismic Walkdown Checklist (SWC)             SWC- 12 Equipment ID No. 1A4-11                   Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could     YZ NEI     Ui--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch.Anhn Kqn#01 Date: 8/16/2012 8/16/2012 John 8/16/2012 EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 54 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN NF1 ULI Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B Photographs EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 55 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND-- U--Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)Location:
Evaluated by: Alex Smerch                                                       Date: 8/16/2012
Bldg. AUX Floor El. 1016' Room, Area 56, 11W'C-18N'1A Manufacturer, Model, Etc. (optional but recommended)
              .Anhn Kqn#01 8/16/2012 8/16/2012 John
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 54 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN NF1     ULI Seismic Walkdown Checklist (SWC)       SWC- 12 Equipment ID No. 1A4-11             Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B Photographs
Y[-D NO 2. Is the anchorage free of bent, broken, missing or loose hardware?The anchorage consists of 3 rows of 2 plug welds on either side of each cubicle attaching the base of each cubicle to embedded steel in the floor.The plug weld on cubicle 1A3-3 middle row is in poor condition and appears to be missing weld. Review of SEWS documentation for 1A3 confirms that the welds are acceptable based on previous weld inspections.
 
Due to breaker obstruction, only 5 plug welds were visible for cubicles 1A3-5, 6, 7, 9, 10, 11, 12, 13, 15 and 20.Plates were obstructing the view of 4 plug welds in cubicles 1A 1- 1A3 and 1A3-4.Based on information provided in the SEWS package the conditions noted above are judged to be adequate.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 55 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND-- U--
As provided in the SEWS package, the loading conditions are minimal with a lowest safety factor of 4 when analyzed against 5 plug welds. Although only 2 plug welds were visible on 1A 1-13 and 1A 3-4, these welds are judged to be adequate based on the extent and consistency encountered during inspection.
Seismic Walkdown Checklist (SWC)                   SWC- 13 Equipment ID No.       1A3                       Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)
: 3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Location: Bldg. AUX               Floor El. 1016'         Room, Area 56, 11W'C-18N'1A Manufacturer, Model, Etc. (optional but recommended)
Minor oxidation noted in the vicintiy of the plug welds.YO NDI UD N/A[D YO ND-1 ur N/AD--IEnter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 56 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y; NF] U[-Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)4. Is the anchorage free of visible cracks in the concrete near the YZ N[] UD- N/A-anchors?No cracks are noted in the floor.5. Is the anchorage configuration consistent with plant documentation?
Anchorage
YEI NEI U-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-D NO of the 50% of SWEL items requiring such verification)?
N/A 6. Based on the above anchorage evaluations, is the anchorage free of Y[ NE] Uil potentially adverse seismic conditions?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO NDI UD N/A[D The anchorageconsists of 3 rows of 2 plug welds on either side of each cubicle attaching the base of each cubicle to embedded steel in the floor.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
The plug weld on cubicle 1A3-3 middle row is in poor condition and appearsto be missing weld. Review of SEWS documentation for 1A3 confirms that the welds are acceptable based on previous weld inspections.
There are overhead light fixtures in the vicinity with uncaged fluorescent bulbs. The light fixture is well overhead and does not pose a credible interaction with 1A3. The light bulb is not a signficant source since it is brittle with an extremely small mass relative to the cabinet.8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
Due to breaker obstruction,only 5 plug welds were visible for cubicles 1A3-5, 6, 7, 9, 10, 11, 12, 13, 15 and 20.
Cable tray is supported overhead.
Plates were obstructing the view of 4 plug welds in cubicles 1A 1- 1A3 and 1A3-4.
The cable tray supports are well supported and there is sufficient vertical clearance between the top of the cabinet and the bottom of the cable tray support. There is also piping overhead which is well supported and brace.9. Do attached lines have adequate flexibility to avoid damage?Flexible cables feed into the top of the cabinet Conduit is also connected to the top of the cabinet and contains multiple bends to promote flexibility.
Based on informationprovided in the SEWS package the conditions noted above are judged to be adequate. As provided in the SEWS package, the loading conditions are minimal with a lowest safety factor of 4 when analyzed against 5 plug welds. Although only 2 plug welds were visible on 1A 1-13 and 1A 3-4, these welds are judged to be adequate based on the extent and consistency encountered during inspection.
YN NEI U[-I N/AD-YZ NEI U-- N/A--YN N[:] U0 N/AD-1 10. Based on the above seismic interaction evaluations, is equipment free YZ NE] U--of potentially adverse seismic interaction effects?
: 3. Is the anchorage free of corrosion that is more than mild surface             YO ND-1 ur N/AD--
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 57 OF 403 Other-Kevin Bessell. .....
oxidation?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 58 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YN ND 1 UD1 Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)R 07 Equipment Note: Equipment.
Minor oxidation noted in the vicintiy of the plug welds.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 59 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YE NR Ut]Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)ote: Plug weld anchorage.
IEnter the equipment class name from Appendix B: Classes of Equipment.
Note: Poor quality plug weld in 1A3-3.Note: Missing O0lt In non-structurai piate in cubicle 1A3-4.
 
Sheet I of 5 Seismic Walkdown Checklist (SWC) SWC- 14 EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 60 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Status: Y[I NE] Ur-j Equipment ID No. 1A4 Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)Location:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 56 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y; NF] U[-
Bldg. AUX Floor El. 1016' Room, Area 56, 16WC-18N'1A Manufacturer, Model, Etc. (optional but recommended)
Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3                         Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
: 4. Is the anchorage free of visible cracks in the concrete near the           YZ N[] UD- N/A-anchors?
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
No cracks are noted in the floor.
Y[K NE 2. Is the anchorage free of bent, broken, missing or loose hardware?The anchorage of the bus consists welds between the bus frame and an embedded metal plate in the concrete floor. All 21 cubicles have at minimum six -1/2" welds between the frame and the embed plate, with the exception of cubicles IA4-2 and 1A4-7 having only 4 welded points.3. Is the anchorage free of corrosion that is more than mild surface oxidation?
: 5. Is the anchorage configuration consistent with plant documentation?         YEI   NEI U-- N/AZ (Note: This question only applies ifthe item is one of the 50% for which an anchorage configuration verification is required.)
There appears to be mild oxidation on some of the welds but no loss of material.4. Is the anchorage free of visible cracks in the concrete near the anchors?There were no cracks observed on the concrete surface.5. Is the anchorage configuration consistent with plant documentation?(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
N/A
Anchorage was verified against SEWS Package for 1A4 Rev. 0.Only 2 welds in cubicle 1A4-21 were visible but given that the SEWS Package conservatively excludes some of the welds from its anchorage analysis and still has significant margin for the seismic analysis, this was not deemed to be a concern.YO NE! U[] N/A[]YO NO! ur] NIAEJ YZ NEI U-] N/A'-YZ NE- ur] N/Ar-' EntCT the cquipment class name from Appendix B: Classes of Equipmcnt.
: 6. Based on the above anchorage evaluations, is the anchorage free of         Y[   NE] Uil potentially adverse seismic conditions?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 61 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YN NEI- UI"-J Seismic Walkdown Checklist (SWC) SWC- 14 Equipment ID No. 1A4 Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?
Interaction Effects
YN N[]U0 Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 7. Are soft targets free from impact by nearby equipment or structures?       YN NEI U[-I N/AD-There are overhead light fixtures in the vicinity with uncaged fluorescent bulbs. The light fixture is well overhead and does not pose a credible interaction with 1A3. The light bulb is not a signficant source since it is brittle with an extremely small mass relative to the cabinet.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YZ NEI    U--  N/A--
and masonry block walls not likely to collapse onto the equipment?
Cable tray is supported overhead. The cable tray supports are well supportedand there is sufficient vertical clearance between the top of the cabinet and the bottom of the cable tray support. There is also piping overhead which is well supported and brace.
: 9. Do attached lines have adequate flexibility to avoid damage?               YN N[:] U0 N/AD-1 Flexible cables feed into the top of the cabinet Conduit is also connected to the top of the cabinet and contains multiple bends to promote flexibility.
: 10. Based on the above seismic interaction evaluations, is equipment free      YZ NE] U--
of potentially adverse seismic interaction effects?
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 57 OF 403 Other-Kevin Bessell. . . . . .
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 58 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YN ND 1   UD1 Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3                 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)
R 07 Equipment                                   Note: Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 59 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YE NR Ut]
Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3                 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C) ote: Plug weld anchorage.
Note: Poor qualityplug weld in 1A3-3.               Note: Missing O0lt In non-structuraipiate in cubicle 1A3-4.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 60 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: Y[I NE] Ur-j Seismic Walkdown Checklist (SWC)                    SWC- 14 Equipment ID No.         1A4                     Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)
Location: Bldg. AUX                 Floor El. 1016'         Room, Area 56, 16WC-18N'1A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[K NE of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO NE! U[] N/A[]
The anchorageof the bus consists welds between the bus frame and an embedded metal plate in the concrete floor. All 21 cubicles have at minimum six -1/2" welds between the frame and the embed plate, with the exception of cubicles IA4-2 and 1A4-7 having only 4 welded points.
: 3. Is the anchorage free of corrosion that is more than mild surface             YO NO! ur] NIAEJ oxidation?
There appearsto be mild oxidation on some of the welds but no loss of material.
: 4. Is the anchorage free of visible cracks in the concrete near the             YZ NEI U-] N/A'-
anchors?
There were no cracks observed on the concrete surface.
: 5. Is the anchorage configuration consistent with plant documentation?           YZ NE- ur] N/Ar-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage was verified againstSEWS Package for 1A4 Rev. 0.
Only 2 welds in cubicle 1A4-21 were visible but given that the SEWS Package conservatively excludes some of the welds from its anchorage analysisand still has significantmargin for the seismic analysis, this was not deemed to be a concern.
' EntCT the cquipment class name from Appendix B: Classes of Equipmcnt.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 61 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YN NEI-   UI"-J Seismic Walkdown Checklist (SWC)                SWC- 14 Equipment ID No.       1A4                    Equip. Class1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)
: 6. Based on the above anchorage evaluations, is the anchorage free of         YN N[]U0 potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?       Y ] N[-] U[-] N/A["]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ N[-] U-] N/AL]
and masonry block walls not likely to collapse onto the equipment?
There were overhead lights and cable trays which were well supported.
There were overhead lights and cable trays which were well supported.
: 9. Do attached lines have adequate flexibility to avoid damage?All attached lines were either flexible cable or had 90 degree elbows giving them flexibility.
: 9. Do attached lines have adequate flexibility to avoid damage?               YN N[E] U[-  N/Afl All attachedlines were either flexible cable or had 90 degree elbows giving them flexibility.
: 10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y ] N[-] U[-] N/A["]YZ N[-] U-] N/AL]YN N[E] U[- N/Afl YO NEI UI-Other Adverse Conditions
: 10. Based on the above seismic interaction evaluations, is equipment free       YO NEI UI-of potentially adverse seismic interaction effects?
: 11. Have you looked for and found no other seismic conditions that could YZI N[] U[-]adversely affect the safety functions of the equipment?
Other Adverse Conditions
In the back of cubicle 1A4-21 there were missing bolts holding up an interior plate inside of the cabinent.
: 11. Have you looked for and found no other seismic conditions that could       YZI N[] U[-]
But since the interior plate was not part of or connected to the structural system of the cabinent it was not judged to be a seismic concern.Comments (Additional pages may be added as necessary)
adversely affect the safety functions of the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 62 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: NI::] U[-j Seismic Walkdown Checklist (SWC) SWC- 14 Equipment ID No. 1A4 Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)Evaluated by: James Carilson ( Date: 12/27/2012 Alex Smerch 12/27/2012 EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 63 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YED NM- UE-Seismic Walkdown Checklist (SWC) SWC- 14 Equipment ID No. tA4 Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)Photouranhs I Note:
In the back of cubicle 1A4-21 there were missing bolts holding up an interiorplate inside of the cabinent. But since the interiorplate was not part of or connected to the structuralsystem of the cabinent it was not judged to be a seismic concern.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 64 OF 403 SEISMIC WALKDOWN CHECKUST FORM Sheet 5 of 5 Status: Nr"J ULI Seismic Walkdown Checklist (SWC) SWC- 14 Equipment ID No. 1A4 Equip. Class' 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)te: Back panel showing no anchorage.
Comments (Additional pages may be added as necessary)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 65 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NI I UDl Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class, 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Location:
 
Bldg. AUX Floor El. 1011' Room, Area 56,0W'C-11N'6D Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 62 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[* NI::] U[-j (SWC)   SWC- 14 Seismic Walkdown Checklist Equipment ID No. 1A4               Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Evaluated by: James Carilson (                                         Date: 12/27/2012 Alex Smerch                                                   12/27/2012
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
 
YM ND 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 63 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YED NM- UE-Seismic Walkdown Checklist (SWC)       SWC- 14 Equipment ID No. tA4               Equip. Class1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YN ND U-I N/AD--YZ ND UD- N/AD--YO NDI UD N/ADl Enter the equipment class name from Appendix B: Classes of Equipment.
I Photouranhs Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 66 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NR] Ut-Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class2 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER
 
: 5. Is the anchorage configuration consistent with plant documentation?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 64 OF 403 SEISMIC WALKDOWN CHECKUST FORM Sheet 5 of 5 Status: Y[* Nr"J ULI (SWC)     SWC- 14 Seismic Walkdown Checklist Equipment ID No. 1A4                 Equip. Class' 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D) te: Back panel showing no anchorage.
Y-] NO Ut] N/At](Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
 
No documentation identified.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 65 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NI I   UDl Seismic Walkdown Checklist (SWC)                   SWC- 15 Equipment ID No.         EE-4S                     Equip. Class, 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56,0W'C-11N'6D Manufacturer, Model, Etc. (optional but recommended)
Anchor layout shown in sketches below.Further license basis evaluation required.6. Based on the above anchorage evaluations, is the anchorage free of Y[t] NZ Ut]potentially adverse seismic conditions?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Anchorage
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YM ND of the 50% of SWEL items requiring such verification)?
There are fluorescent lights located overhead nearby that are not caged which could cause a potentially adverse seismic condition with nearby equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YN ND U-I N/AD--
CR 2012-10423 has been initiated.
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ ND UD- N/AD--
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y] Nt] Ut] N/At]YtI NO Ut] N/At]YO Nt] Ut] N/At]Y[--] NO U 2 Enter the equipment class name from Appendix B: Classes of Equipment.
oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 67 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NR ULI Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class3 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Other Adverse Conditions
: 4. Is the anchorage free of visible cracks in the concrete near the               YO NDI     UD N/ADl anchors?
: 11. Have you looked for and found no other seismic conditions that could YN NEil U-I adversely affect the safety functions of the equipment?
Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 66 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   NR] Ut-Seismic Walkdown Checklist (SWC)                   SWC- 15 Equipment ID No.         EE-4S                     Equip. Class2 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER
: 5. Is the anchorage configuration consistent with plant documentation?           Y-] NO Ut] N/At]
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
No documentation identified. Anchor layout shown in sketches below.
Furtherlicense basis evaluation required.
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[t] NZ Ut]
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y] Nt] Ut] N/At]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YtI NO Ut] N/At]
and masonry block walls not likely to collapse onto the equipment?
There are fluorescent lights located overhead nearby that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YO Nt] Ut] N/At]
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[--] NO U of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 67 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[   NR ULI Seismic Walkdown Checklist (SWC)                     SWC- 15 Equipment ID No.         EE-4S                     Equip. Class3 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN NEil U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/16/2012 Alex Smerch 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                             Date: 8/16/2012 8/16/2012 Alex Smerch 1/*'
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 68 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NF1 UI1 Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class4 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Photographs Plan W6 6" 30" 1/" anchor bolt (typ.) l 6"Elev~Elev.Note: Equipment is attached to two W6's, which are anchored to concrete wall Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
* 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 69 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nt]1 Ut]Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class, 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 183C Location:
 
Bldg. AUX Floor El. 1011' Room, Area 56, 7W'C-17N'4A Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 68 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NF1   UI1 Seismic Walkdown Checklist (SWC)                     SWC- 15 Equipment ID No.         EE-4S                     Equip. Class4 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Photographs Plan W6 6"
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
30" 1/" anchor bolt (typ.)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YN Nt-]of the 50% of SWEL items requiring such verification)?
l 6"Elev
: 2. Is the anchorage free of bent, broken, missing or loose hardware?The transformer is welded to embed channels.3. Is the anchorage free of corrosion that is more than mild surface oxidation?
          ~Elev.
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YZ NtI Ut] N/At-]YZ Nt] Ut] N/At]YM ND] ULt N/At]' Enter the equipment class name from Appendix B: Classes of Equipment.
Note: Equipment is attached to two W6's,                           Note:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 70 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND UD Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class2 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 1B3C 5. Is the anchorage configuration consistent with plant documentation?
which are anchoredto concrete wall 4 Enter the equipment class name from Appendix B: Classes of Equipment.
YZ NDI ULi N/ADl (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
 
The anchorage configuration is consistent with drawing A-5438 (File#43610).6. Based on the above anchorage evaluations, is the anchorage free of Y[ ND] UD potentially adverse seismic conditions?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 69 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nt]1 Ut]
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Seismic Walkdown Checklist (SWC)                     SWC- 16 Equipment ID No.       T1B-3C                   Equip. Class, 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 183C Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 7W'C-17N'4A Manufacturer, Model, Etc. (optional but recommended)
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment.
Anchorage
CR 2012-10423 has been initiated.
: 1. Is the anchorage configuration verification required (i.e., is the item one   YN Nt-]
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YO ND:] uD-] N/AD-YD NZ UD- N/AD-YDI ND-] UD- N/AO Y-I NO UiD 2 Enter the equipment class name from Appendix B: Classes of Equipment.
of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 71 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ ND-- UF-1 Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class3 4, TRANSFORMERS Equipment Description 41601480 TRANSFORMER BUS 1B3C Other Adverse Conditions
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NtI    Ut] N/At-]
: 11. Have you looked for and found no other seismic conditions that could YZ NEI UrF--adversely affect the safety functions of the equipment?
The transformeris welded to embed channels.
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ Nt] Ut] N/At]
oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the               YM ND] ULt     N/At]
anchors?
' Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 70 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND     UD Seismic Walkdown Checklist (SWC)                   SWC- 16 Equipment ID No.         T1B-3C                   Equip. Class2 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 1B3C
: 5. Is the anchorage configuration consistent with plant documentation?           YZ NDI     ULi N/ADl (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The anchorage configuration is consistent with drawing A-5438 (File#
43610).
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   ND] UD potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YO ND:] uD-] N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YD NZ UD- N/AD-and masonry block walls not likely to collapse onto the equipment?
There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YDI  ND-] UD- N/AO
: 10. Based on the above seismic interaction evaluations, is equipment free         Y-I NO UiD of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 71 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[   ND-- UF-1 Seismic Walkdown Checklist (SWC)                   SWC- 16 Equipment ID No.         T1B-3C                   Equip. Class3 4, TRANSFORMERS Equipment Description 41601480 TRANSFORMER BUS 1B3C Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ NEI     UrF--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Alex Smerch Date: 8/16/2012 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                             Date: 8/16/2012 Alex Smerch                                                              8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 72 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM N[-- U-II Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class4 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 1B3C Photographs Note: Equipment.
 
cage.4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 72 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM N[--   U-II Seismic Walkdown Checklist (SWC)                   SWC- 16 Equipment ID No.         T1B-3C                   Equip. Class4 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 1B3C Photographs Note: Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 73 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ NE] U--Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class, 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Location:
cage.
Bldg. AUX Floor El. 1027' Room, Area 69, 1W'N-3N'8A Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[ N[D]of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 73 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[   NE] U--
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Seismic Walkdown Checklist (SWC)                   SWC- 17 Equipment ID No.       AC-3C                     Equip. Class, 5, HORIZONTAL PUMPS Equipment Description       COMPONENT COOLING WATER PUMP Location: Bldg. AUX                 Floor El. 1027'         Room, Area 69, 1W'N-3N'8A Manufacturer, Model, Etc. (optional but recommended)
YN NE] UE] N/AE]3. Is the anchorage free of corrosion that is more than mild surface YN NDl UD- N/ADl oxidation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. Is the anchorage free of visible cracks in the concrete near the Y[ NDJ U-I N/AD--anchors?IEnter the equipment class name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 74 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND I U--Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class2 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP 5. Is the anchorage configuration consistent with plant documentation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[   N[D]
YZ NDi UD- N/ADl (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
of the 50% of SWEL items requiring such verification)?
The anchorage is consistent with drawing 11405-S-53, Rev. 6 (File#16438).6. Based on the above anchorage evaluations, is the anchorage free of YZ ND] UDJ potentially adverse seismic conditions?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YN NE] UE] N/AE]
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 3. Is the anchorage free of corrosion that is more than mild surface             YN NDl UD- N/ADl oxidation?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 4. Is the anchorage free of visible cracks in the concrete near the             Y[   NDJ U-I N/AD--
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YED ND] UD- N/A[Y[Z ND] UD] N/AD: Y[O NDI UD: N/AD I Y[ NDi U--1 2 Enter the equipment class name from Appendix B: Classes of Equipment.
anchors?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 75 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NFi- U--Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class3 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Other Adverse Conditions
IEnter the equipment class name from Appendix B: Classes of Equipment.
: 11. Have you looked for and found no other seismic conditions that could YZ NE] U-I adversely affect the safety functions of the equipment?
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 74 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND I U--
Seismic Walkdown Checklist (SWC)                   SWC- 17 Equipment ID No.         AC-3C                     Equip. Class2 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP
: 5. Is the anchorage configuration consistent with plant documentation?           YZ NDi     UD- N/ADl (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The anchorageis consistent with drawing 11405-S-53, Rev. 6 (File#
16438).
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ ND] UDJ potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YED ND] UD- N/A[
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     Y[Z ND] UD] N/AD:
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[O NDI UD: N/ADI
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[  NDi U--1 of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 75 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NFi-   U--
Seismic Walkdown Checklist (SWC)                   SWC- 17 Equipment ID No.         AC-3C                     Equip. Class3 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ NE] U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/21/2012 Alex Smerch 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                             Date: 8/21/2012 Alex Smerch                                                             8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 76 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ Nn U-Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class4 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Photographs Note: Equipment Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 77 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ N[i- U--Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class, 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Location:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 76 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[   Nn U-Seismic Walkdown Checklist (SWC)                   SWC- 17 Equipment ID No.       AC-3C                     Equip. Class4 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Photographs Note: Equipment                                                   Note:
Bldg. AUX 1027' Room, Area 69, 1W'N-4'S8A Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 77 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[   N[i- U--
YM NDl 2. Is the anchorage free of bent, broken, missing or loose hardware?In-line valve.YN ND_ UID N/AD--3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Seismic Walkdown Checklist (SWC)                     SWC- 18 Equipment ID No.         AC-3B                     Equip. Class, 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Location: Bldg.     AUX                       1027'         Room, Area 69, 1W'N-4'S8A Manufacturer, Model, Etc. (optional but recommended)
In-line valve.4. Is the anchorage free of visible cracks in the concrete near the anchors?YN ND_1 U[- N/ADJ YZ NO uD1 N/AD-I Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 78 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN Nt] Ut]Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class2 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP 5. Is the anchorage configuration consistent with plant documentation?
Anchorage
YZ Nti ULi N/ALi (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 1. Is the anchorage configuration verification required (i.e., is the item one   YM NDl of the 50% of SWEL items requiring such verification)?
In-line valve.6. Based on the above anchorage evaluations, is the anchorage free of YN NEI Ut]potentially adverse seismic conditions?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YN ND_     UID N/AD--
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
In-line valve.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 3. Is the anchorage free of corrosion that is more than mild surface             YN ND_1 U[-    N/ADJ oxidation?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Yt-] NEI Ut] N/AZ YM NEI Ut:] N/At]I YN NEI Ut] N/At]YM NFI Ut]2 Enter the equipment class name from Appendix B: Classes of Equipment.
In-line valve.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 79 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NI Uni-Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class3 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Other Adverse Conditions
: 4. Is the anchorage free of visible cracks in the concrete near the               YZ NO uD1 N/AD-anchors?
: 11. Have you looked for and found no other seismic conditions that could Y[ NEil U-I adversely affect the safety functions of the equipment?
I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 78 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN Nt]     Ut]
Seismic Walkdown Checklist (SWC)                   SWC- 18 Equipment ID No.         AC-3B                     Equip. Class2 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP
: 5. Is the anchorage configuration consistent with plant documentation?           YZ Nti   ULi N/ALi (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
In-line valve.
: 6. Based on the above anchorage evaluations, is the anchorage free of             YN NEI   Ut]
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Yt-] NEI Ut] N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YM NEI Ut:] N/At]I and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN NEI Ut] N/At]
: 10. Based on the above seismic interaction evaluations, is equipment free         YM NFI Ut]
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 79 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NI     Uni-Seismic Walkdown Checklist (SWC)                   SWC- 18 Equipment ID No.           AC-3B                   Equip. Class3 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   NEil U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluaed b :Joh a V-"o Alex ... .I Alex Smerch Date: 8/21/2012 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
V-"o Evaluaed b   :Joh       a                                                       Date: 8/21/2012
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 80 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NR U-II Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class4 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Photographs Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
                      ... Smerch l*
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 81 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ ND- UD-1 Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class, 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Location:
Alex Alex          I *  .                                                  8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. AUX Floor El. 991' Room, Area 6, 5E'U-4N'6E Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 80 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NR U-II Seismic Walkdown Checklist (SWC)                     SWC- 18 Equipment ID No.         AC-3B                     Equip. Class4 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Photographs Note:
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[ ND of the 50% of SWEL items requiring such verification)?
4 Enter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
 
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YN NEI ULI N/AD1 YZ NDI UD1 N/AD-YN NDI ui N/A--IEnter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 81 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[   ND- UD-1 Seismic Walkdown Checklist (SWC)                   SWC- 19 Equipment ID No.       CH-1A                     Equip. Class, 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Location: Bldg. AUX                 Floor El. 991'           Room, Area 6, 5E'U-4N'6E Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 82 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ ND-- UD--Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class2 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP 5. Is the anchorage configuration consistent with plant documentation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YZ ND UDl N/ALi (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage
The anchorage configuration is consistent with drawing 11405-S-48, Rev. 7 (File# 16433) and 11405-S-69, Rev. 5 (File# 16454).6. Based on the above anchorage evaluations, is the anchorage free of Y[ NIl ULi potentially adverse seismic conditions?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[   ND of the 50% of SWEL items requiring such verification)?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YN NEI ULI      N/AD1
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ NDI UD1 N/AD-oxidation?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YZ ND U-I N/AF-]YN NDI UD-- N/AD YN NDI UD N/ADl YN NO U-2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 4. Is the anchorage free of visible cracks in the concrete near the             YN NDI     ui   N/A--
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 83 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NR U-Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class3 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Other Adverse Conditions
anchors?
: 11. Have you looked for and found no other seismic conditions that could Y] NE] UL-I adversely affect the safety functions of the equipment?
IEnter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 82 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   ND-- UD--
Seismic Walkdown Checklist (SWC)                   SWC- 19 Equipment ID No.         CH-1A                     Equip. Class2 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP
: 5. Is the anchorage configuration consistent with plant documentation?           YZ ND UDl N/ALi (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The anchorageconfiguration is consistent with drawing 11405-S-48, Rev. 7 (File# 16433) and 11405-S-69, Rev. 5 (File# 16454).
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   NIl   ULi potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YZ ND U-I N/AF-]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN NDI UD-- N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN NDI UD N/ADl
: 10. Based on the above seismic interaction evaluations, is equipment free         YN NO U-of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 83 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[   NR U-Seismic Walkdown Checklist (SWC)                   SWC- 19 Equipment ID No.         CH-1A                     Equip. Class3 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y]   NE] UL-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Alex Smerch x'--Date: 8/20/12 8/20/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                               Date: 8/20/12 Alex Smerch              x'--                                            8/20/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 84 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Ni-- U-Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class4 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 84 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Ni--   U-Seismic Walkdown Checklist (SWC)                   SWC- 19 Equipment ID No.         CH-1A                     Equip. Class4 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Photographs Note: Equipment.                                                   Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 85 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YM ND-1 Un Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class, 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. AUX Floor El. 1010' Rc Manufacturer, Model, Etc. (optional but recommended) om, Area 64, 20W'F-22N'1A Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 85 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YM ND-1 Un Seismic Walkdown Checklist (SWC)                     SWC- 20 Equipment ID No.         FO-17-2                   Equip. Class, 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Location: Bldg. AUX                 Floor El. 1010'         Rc om, Area 64, 20W'F-22N'1A Manufacturer, Model, Etc. (optional but recommended)
Y[-- NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YZ NEI- U-- N/A[-]YZ N--1 ULI-I N/AD-YEI NEIl U[- N/A]' Enter the equipment class name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 86 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND U-Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class2 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP 5. Is the anchorage configuration consistent with plant documentation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-- NO of the 50% of SWEL items requiring such verification)?
YE] NEI U-I N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NEI- U-- N/A[-]
: 6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ N--1 ULI-I N/AD-oxidation?
YN NEIUE Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 4. Is the anchorage free of visible cracks in the concrete near the               YEI NEIl U[-   N/A]
Y[ NE] U0 N/AiD-8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEI UD- N/A--and masonry block walls not likely to collapse onto the equipment?
anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?YZ Nr- UD1 N/A[l 10. Based on the above seismic interaction evaluations, is equipment free YZ NEI UDl of potentially adverse seismic interaction effects?2 Enter the equipment class name from Appendix B: Classes of Equipment.
' Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 87 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM NEI U[-1 Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class3 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Other Adverse Conditions
 
: 11. Have you looked for and found no other seismic conditions that could YN NE] UI--adversely affect the safety functions of the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 86 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN   ND U-Seismic Walkdown Checklist (SWC)                   SWC- 20 Equipment ID No.         FO-17-2                   Equip. Class2 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP
: 5. Is the anchorage configuration consistent with plant documentation?           YE] NEI   U-I N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YN NEIUE potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[   NE] U0 N/AiD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NEI     UD- N/A--
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ Nr-     UD1 N/A[l
: 10. Based on the above seismic interaction evaluations, is equipment free         YZ NEI     UDl of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 87 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM NEI U[-1 Seismic Walkdown Checklist (SWC)                   SWC- 20 Equipment ID No.         FO-17-2                   Equip. Class3 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN NE] UI--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch___ ._-:_-_-_-_-_-_-_-._-------_
Evaluated by: Alex Smerch                    ___._-:_-_-_-_-_-_-_-._-------_       Date: 8/15/2012 John Kaoff             &#xfd;"~                                               8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Date: 8/15/2012 John Kaoff &#xfd;"~ 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 88 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN Nr- UL]Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class4 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Photographs Note: Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 88 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN Nr-   UL]
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
Seismic Walkdown Checklist (SWC)                   SWC- 20 Equipment ID No.         FO-17-2                   Equip. Class4 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Photographs Note: Equipment.                                                   Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 89 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YM NL-- URI--Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class, 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. AUX Floor El. 1012' Room, Area 64, 3W'K-6S'2B Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 89 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YM NL--   URI--
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
Seismic Walkdown Checklist (SWC)                     SWC- 21 Equipment ID No.         FO-4A-2                   Equip. Class, 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Location: Bldg. AUX                 Floor El. 1012'         Room, Area 64, 3W'K-6S'2B Manufacturer, Model, Etc. (optional but recommended)
YZ NDl 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YZ NDI UDJ N/AD YZ Nn UD-- N/AD YO NO UD N/AZ' Enter the equipment class name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 90 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YM ND] UDl Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class2 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 5. Is the anchorage configuration consistent with plant documentation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YZ NDl of the 50% of SWEL items requiring such verification)?
YO NDI U0- N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NDI UDJ N/AD
The anchorage configuration is consistent with drawing 303. 18-IC-01, Rev. 2 (File# 55108).6. Based on the above anchorage evaluations, is the anchorage free of Y[ ND] UD]potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ Nn UD-- N/AD oxidation?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 4. Is the anchorage free of visible cracks in the concrete near the               YO NO UD N/AZ anchors?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
' Enter the equipment class name from Appendix B: Classes of Equipment.
Fan overhead possibly missing tie down clips. Could be out of licensing basis or may not require all clips to be attached.
 
CR 2012-10367 has been initiated.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 90 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YM ND]     UDl Seismic Walkdown Checklist (SWC)                   SWC- 21 Equipment ID No.         FO-4A-2                   Equip. Class2 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YO N[D- UD1 N/AD1 YDI N[I UD N/AD: YO NDI UD- N/AD Yr- NO U--2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 5. Is the anchorage configuration consistent with plant documentation?           YO NDI     U0- N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 91 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[l NF- Ur--Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class3 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Other Adverse Conditions
The anchorageconfiguration is consistent with drawing 303. 18-IC-01, Rev. 2 (File# 55108).
: 11. Have you looked for and found no other seismic conditions that could YZ NEI U-I adversely affect the safety functions of the equipment?
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   ND] UD]
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YO N[D- UD1 N/AD1
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YDI N[I UD N/AD:
and masonry block walls not likely to collapse onto the equipment?
Fan overhead possibly missing tie down clips. Could be out of licensing basis or may not requireall clips to be attached. CR 2012-10367 has been initiated.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YO NDI UD- N/AD
: 10. Based on the above seismic interaction evaluations, is equipment free         Yr-  NO U--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 91 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[l NF-   Ur--
Seismic Walkdown Checklist (SWC)                     SWC- 21 Equipment ID No.       FO-4A-2                   Equip. Class3 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ NEI U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/15/12 Alex Smerch 8/15/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                             Date: 8/15/12 Alex Smerch                                                             8/15/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 92 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YX NR U-II Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class4 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Photographs Note: Equipment.
 
Note: Fan shield above equipment with holes for additional bolts.4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 92 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YX NR U-II Seismic Walkdown Checklist (SWC)                   SWC- 21 Equipment ID No.         FO-4A-2                   Equip. Class4 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Photographs Note: Equipment.                                                   Note: Fan shield above equipment with holes for additionalbolts.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 93 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NR UI-Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class' 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEED WA TER PUMP (TURBINE-DRIVEN)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Location:
 
Bldg. AUX Floor El. 991' Room, Area 19, 3W'C-1N'3A Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 93 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NR UI-Seismic Walkdown Checklist (SWC)                     SWC- 22 Equipment ID No.         FW-1O                     Equip. Class' 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (TURBINE-DRIVEN)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Location: Bldg. AUX                 Floor El. 991'           Room, Area 19, 3W'C-1N'3A Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y] ND of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?One anchor was inspected to find that the nut was not flush with the baseplate, upon further inspection of the configuration drawings it was found that this anchor in question was not required, and was most likely just used for leveling for installation.
Anchorage
: 3. Is the anchorage free of corrosion that is more than mild surface oxidation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y] ND of the 50% of SWEL items requiring such verification)?
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YE NDI u- N/AD YZ NDl UDl N/AD:-YIN NDI UD1 N/ADl I Enter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YE NDI u-      N/AD One anchorwas inspected to find that the nut was not flush with the baseplate, upon further inspection of the configuration drawings it was found that this anchorin question was not required, and was most likely just used for leveling for installation.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 94 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ N[-- U[--Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class2 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEED WA TER PUMP (TURBINE-DRIVEN)
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ NDl UDl N/AD:-
: 5. Is the anchorage configuration consistent with plant documentation?
oxidation?
YN ND] U[I N/AlI (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 4. Is the anchorage free of visible cracks in the concrete near the               YIN NDI   UD1 N/ADl anchors?
The anchorage configuration is consistent with drawing 11405-S-47, Rev. 14 (File#16432) and 11405-S-69, Rev. 5 (File# 16454).6. Based on the above anchorage evaluations, is the anchorage free of YN NEIl UD potentially adverse seismic conditions?
I Enter the equipment class name from Appendix B: Classes of Equipment.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
Pump not soft target.8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 94 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ N[-- U[--
Unistrut nearby appears to be missing clamp but its failure would not damage pump as it is a non significant threat.9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[-1 NDI UD- N/AZ YN NDJ U[-I N/A[--YN ND-] UD-- N/AD--YZ NE] U[--2 Enter the equipment class name from Appendix B: Classes of Equipment.
Seismic Walkdown Checklist (SWC)                   SWC- 22 Equipment ID No.         FW-1O                     Equip. Class2 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (TURBINE-DRIVEN)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 95 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N-- UD--Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class3 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEED WA TER PUMP (TURBINE-DRIVEN)
: 5. Is the anchorage configuration consistent with plant documentation?         YN ND] U[I N/AlI (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The anchorage configuration is consistent with drawing 11405-S-47, Rev. 14 (File#16432)and 11405-S-69, Rev. 5 (File# 16454).
: 6. Based on the above anchorage evaluations, is the anchorage free of           YN NEIl UD potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[-1 NDI  UD- N/AZ Pump not soft target.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YN NDJ U[-I N/A[--
and masonry block walls not likely to collapse onto the equipment?
Unistrut nearby appears to be missing clamp but its failure would not damage pump as it is a non significantthreat.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN ND-] UD-- N/AD--
: 10. Based on the above seismic interaction evaluations, is equipment free       YZ NE] U[--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 95 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N-- UD--
Seismic Walkdown Checklist (SWC)                   SWC- 22 Equipment ID No.         FW-1O                     Equip. Class3 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (TURBINE-DRIVEN)
Other Adverse Conditions
Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could YZ NEI U-il adversely affect the safety functions of the equipment?
: 11. Have you looked for and found no other seismic conditions that could       YZ NEI     U-il adversely affect the safety functions of the equipment?
Nearby scaffolding anchored at only 1 point would be blocked by pipe supports if seismic motion occured and would not contact pump.Comments (Additional pages may be added as necessary)
Nearby scaffolding anchored at only 1 point would be blocked by pipe supports if seismic motion occured and would not contact pump.
Evaluated by: Alex Smerch_ _ _ _ _ _ Date: 8/13/12 John Kao 1/-" 8/13/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Comments (Additional pages may be added as necessary)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 96 OF 403 ATTACHMENT  
Evaluated by: Alex Smerch                _      _       _       _   _   _       Date: 8/13/12 1/-"
John Kao                                                                  8/13/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 96 OF 403 ATTACHMENT       9.6                                                              SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NE]    UI--
Seismic Walkdown Checklist (SWC)                    SWC- 22 Equipment ID No.        FW-1O                    Equip. Class4 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP(TURBINE-DRIVEN)
Photographs Note: Equipment.                                                  Note: Anchorage showing bolts between skid and skid and foundation and pump and skid.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 97 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 3 Status: Y] NiD UD--
Seismic Walkdown Checklist (SWC)                  SWC- 23 Equipment ID No.        FW-6                      Equip. Class 1 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP(MOTOR-DRIVEN)
Location: Bldg. AUX                Floor El. 992'          Room, Area 19, 4W'C-5S'4A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
: 1. Is the anchorage configuration verification required (i.e., is the item one  YO NDl of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?            YE NDI    UD-- N/A[--
The anchorageof the equipment consists of 6, 1" diametercast in place anchorbolts through an equipment skid.
: 3. Is the anchorage free of corrosion that is more than mild surface            YZ NDI UD- N/AD:]
oxidation?
The skid and anchorbolts are painted red. There was no corrosion noted.
: 4. Is the anchorage free of visible cracks in the concrete near the              YZ NDI    U[-] N/AD1 anchors?
The equipment is mounted on a pedestal that is attached to the reinforced concrete floor. The pedestal and floor are epoxy coated.
There were no cracks observed in the pedestal or the floor.
: 5. Is the anchorage configuration consistent with plant documentation?          Y[9 NDI  UiD  N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The anchorageconfigurationis consistent with 11405-S-69, Rev. 5.
: 6. Based on the above anchorage evaluations, is the anchorage free of            YZ NDJ UED potentially adverse seismic conditions?
'Enter the equipment class name from Appendix B: Classes of Equipment.


===9.6 SEISMIC===
WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NE] UI--Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class4 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEED WA TER PUMP (TURBINE-DRIVEN)
Photographs Note: Equipment.
Note: Anchorage showing bolts between skid and skid and foundation and pump and skid.4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 97 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 3 Status: Y] NiD UD--Seismic Walkdown Checklist (SWC) SWC- 23 Equipment ID No. FW-6 Equip. Class 1 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (MOTOR-DRIVEN)
Location:
Bldg. AUX Floor El. 992' Room, Area 19, 4W'C-5S'4A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
YO NDl 2. Is the anchorage free of bent, broken, missing or loose hardware?The anchorage of the equipment consists of 6, 1" diameter cast in place anchor bolts through an equipment skid.3. Is the anchorage free of corrosion that is more than mild surface oxidation?
The skid and anchor bolts are painted red. There was no corrosion noted.4. Is the anchorage free of visible cracks in the concrete near the anchors?The equipment is mounted on a pedestal that is attached to the reinforced concrete floor. The pedestal and floor are epoxy coated.There were no cracks observed in the pedestal or the floor.5. Is the anchorage configuration consistent with plant documentation?(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The anchorage configuration is consistent with 11405-S-69, Rev. 5.6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?
YE NDI UD-- N/A[--YZ NDI UD- N/AD:]YZ NDI U[-] N/AD1 Y[9 NDI UiD N/AD-YZ NDJ UED'Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 98 OF 403 1K Interaction Effects Other Adverse Conditions Other Adverse Conditions Kevin Bessel!
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 98 OF 403 1K Interaction Effects Other Adverse Conditions Other Adverse Conditions Kevin Bessel!
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 99 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 3 Status: YE ND- U[-I Seismic Walkdown Checklist (SWC) SWC- 23 Equipment ID No. FW-6 Equip. Class' 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (MOTOR-DRIVEN)
 
PhotoQraDhs Note: I1I4Uv-- IVidlIIId lIa.OU equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 99 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 3 Status: YE ND- U[-I Seismic Walkdown Checklist (SWC)     SWC- 23 Equipment ID No.       FW-6         Equip. Class' 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (MOTOR-DRIVEN)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 100 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nn UnI Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class, 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Location:
PhotoQraDhs I1I4Uv-- IVidlIIId lIa.OU                         Note:
Bldg. INTAKE Floor El. 994' Room, Area INTAKE, 1E'CC-1N'103 Manufacturer, Model, Etc. (optional but recommended)
equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[-] No of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 100 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nn UnI Seismic Walkdown Checklist (SWC)                   SWC- 24 Equipment ID No.         AC-10B                   Equip. Class, 6, VERTICAL PUMPS Equipment Description         RAW WATER PUMP Location: Bldg.     INTAKE         Floor El. 994'           Room, Area INTAKE, 1E'CC-1N'103 Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YZ ND: ULi N/AD-Welded.3. Is the anchorage free of corrosion that is more than mild surface Y[ ND UiE N/AD--oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the YN ND-] UD-- N/AD--anchors?I Enter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-] No of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 101 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE]1 UE]Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class2 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ ND: ULi N/AD-Welded.
YE] NE] UI- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[   ND UiE   N/AD--
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ N[-] UE--potentially adverse seismic conditions?
oxidation?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 4. Is the anchorage free of visible cracks in the concrete near the               YN ND-] UD--   N/AD--
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YE] NE:] UE] N/AZ YN NEI UE] N/AE]YN NE] UE] N/A[-]Y[ N] U--2 Enter the equipment class name from Appendix B: Classes of Equipment.
I Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 102 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Nn U-II Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class3 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Other Adverse Conditions
 
: 11. Have you looked for and found no other seismic conditions that could YN NE] U-I adversely affect the safety functions of the equipment?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 101 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE]1 UE]
Seismic Walkdown Checklist (SWC)                     SWC- 24 Equipment ID No.         AC-10B                   Equip. Class2 6, VERTICAL PUMPS Equipment Description         RAW WATER PUMP
: 5. Is the anchorage configuration consistent with plant documentation?           YE] NE] UI- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ N[-] UE--
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YE] NE:] UE] N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YN NEI UE] N/AE]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN NE] UE] N/A[-]
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[  N] U--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 102 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Nn U-II Seismic Walkdown Checklist (SWC)                     SWC- 24 Equipment ID No.       AC-10B                   Equip. Class3 6, VERTICAL PUMPS Equipment Description         RAW WATER PUMP Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN NE] U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch &#xfd;&#xfd;, I-________-----__Date:
Evaluated by: Alex Smerch &#xfd;&#xfd;,I-         ________-----__Date:                             8/17/2012 John Kao~"-'                                                             8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
8/17/2012 John Kao~"-' 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 103 OF 403 SEISMIC WALKOOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NEI UI Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class4 6. VERTICAL PUMPS Equipment Description RAW WATER PUMP Photographs Note: Equipment Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 103 OF 403 SEISMIC WALKOOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NEI     UI Seismic Walkdown Checklist (SWC)                   SWC- 24 Equipment ID No.       AC-10B                     Equip. Class4 6. VERTICAL PUMPS Equipment Description         RAW WATER PUMP Photographs Note: Equipment                                                   Note:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 104 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nt-] Ut-]Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Classi 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. INTAKE Floor El. 994' Room, Area INTAKE, 1E'CC-1N'104 Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 104 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nt-] Ut-]
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
Seismic Walkdown Checklist (SWC)                     SWC- 25 Equipment ID No.         AC-10D                   Equip. Classi 6, VERTICAL PUMPS Equipment Description         RAW WATER PUMP Location: Bldg. INTAKE               Floor El. 994'           Room, Area INTAKE, 1E'CC-1N'104 Manufacturer, Model, Etc. (optional but recommended)
Y[-] NO 2. Is the anchorage free of bent, broken, missing or loose hardware?Welded.3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YO Nt-] Ut-] N/At]YN N] UtI] N/At-]YN Nt] Ut] N/At]Enter the equipment class name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 105 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ N--1 U[--Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Class2 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP 5. Is the anchorage configuration consistent with plant documentation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-] NO of the 50% of SWEL items requiring such verification)?
YOI NI U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO Nt-] Ut-] N/At]
: 6. Based on the above anchorage evaluations, is the anchorage free of YN NOi- UI-potentially adverse seismic conditions?
Welded.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 3. Is the anchorage free of corrosion that is more than mild surface             YN N] UtI] N/At-]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
oxidation?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YD ND UD N/AZ YZ ND UD N/AD YZ ND I U-- N/AD YN N- U-2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 4. Is the anchorage free of visible cracks in the concrete near the               YN Nt] Ut] N/At]
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 106 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YO ND-] U[--Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Class3 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Other Adverse Conditions
anchors?
: 11. Have you looked for and found no other seismic conditions that could YE NRi U-I adversely affect the safety functions of the equipment?
Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 105 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   N--1 U[--
Seismic Walkdown Checklist (SWC)                   SWC- 25 Equipment ID No.         AC-10D                   Equip. Class2 6, VERTICAL PUMPS Equipment Description         RAW WATER PUMP
: 5. Is the anchorage configuration consistent with plant documentation?         YOI NI U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YN NOi-   UI-potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YD ND UD N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YZ ND UD N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ NDI U-- N/AD
: 10. Based on the above seismic interaction evaluations, is equipment free       YN N- U-of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 106 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YO ND-] U[--
Seismic Walkdown Checklist (SWC)                     SWC- 25 Equipment ID No.         AC-10D                   Equip. Class3 6, VERTICAL PUMPS Equipment Description         RAW WATER PUMP Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YE NRi     U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch/it  
Evaluated by: Alex Smerch/it /                 --                                   Date: 8/17/2012 John Kaowi-                                                              8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
/ --John Kaowi-Date: 8/17/2012 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 107 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Nn U-Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Class4 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Photographs Note: Equipment Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 107 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Nn U-Seismic Walkdown Checklist (SWC)                   SWC- 25 Equipment ID No.       AC-10D                   Equip. Class4 6, VERTICAL PUMPS Equipment Description         RAW WATER PUMP Photographs Note: Equipment                                                   Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 108 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y] NDl UD--Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. ClassI 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2A,B&C/SI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. AUX Floor El. 992' Room, Area 6, 9W'T-2N'6E Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 108 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y] NDl     UD--
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y-I NO of the 50% of SWEL items requiring such verification)?
Seismic Walkdown Checklist (SWC)                   SWC- 26 Equipment ID No.       HCV-474                   Equip. ClassI 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2A,B&C/SI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Location: Bldg. AUX                 Floor El. 992'           Room, Area 6, 9W'T-2N'6E Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YO N-- U[- N/ADl 3. Is the anchorage free of corrosion that is more than mild surface Y[ NDI UlI N/AD oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the YZ NDI UlI N/AD anchors?IEnter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y-I NO of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 109 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NF1 U--Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/SI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO N-- U[-     N/ADl
YEI ND- UiI N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[   NDI   UlI N/AD oxidation?
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ ND] ULI potentially adverse seismic conditions?
: 4. Is the anchorage free of visible cracks in the concrete near the               YZ NDI UlI N/AD anchors?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
IEnter the equipment class name from Appendix B: Classes of Equipment.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
 
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[-- NDJ UiD N/AZ Y[ NElI UEL N/AD Y[ NDI UD- N/AD YZ Nn UD 2 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 109 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   NF1 U--
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 110 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ N U-il Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/Sl-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Other Adverse Conditions
Seismic Walkdown Checklist (SWC)                   SWC- 26 Equipment ID No.         HCV-474                   Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/SI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE
: 11. Have you looked for and found no other seismic conditions that could Y[ NE] U-I adversely affect the safety functions of the equipment?
: 5. Is the anchorage configuration consistent with plant documentation?           YEI ND- UiI N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ ND] ULI potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[-- NDJ UiD N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     Y[  NElI UEL N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[  NDI UD- N/AD
: 10. Based on the above seismic interaction evaluations, is equipment free         YZ Nn UD of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 110 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[   N   U-il Seismic Walkdown Checklist (SWC)                   SWC- 26 Equipment ID No.         HCV-474                   Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/Sl-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   NE] U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/20/2012 Alex Smerch I 8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                             Date: 8/20/2012 Alex Smerch I                                                           8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 111 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND U--Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/Sk-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 111 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND U--
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 112 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN NR Ut]-1 Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE Location:
Seismic Walkdown Checklist (SWC)                   SWC- 26 Equipment ID No.         HCV-474                   Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/Sk-3A-C BRG CLRS                   CCW INLET HEADER ISOLATION VALVE Photographs Note: Equipment.                                                   Note:
Bldg. AUX Floor El. 993' Room, Area 4, 2E'E-22N'5B Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Yt] NN of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 112 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN NR     Ut]-1 Seismic Walkdown Checklist (SWC)                     SWC- 27 Equipment ID No.       HCV-484                   Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE Location: Bldg. AUX                 Floor El. 993'           Room, Area 4, 2E'E-22N'5B Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YEI NE]I Ut] N/AN 3. Is the anchorage free of corrosion that is more than mild surface YE] NE] Ut] N/AZ oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the Y[] Nt] Ut] N/AZ anchors?' Enter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   Yt] NN of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 113 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE N] UI-Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YEI NE]I Ut] N/AN
Y-- Nil ULI N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             YE] NE] Ut] N/AZ oxidation?
: 6. Based on the above anchorage evaluations, is the anchorage free of Y[ NFi- UI-potentially adverse seismic conditions?
: 4. Is the anchorage free of visible cracks in the concrete near the               Y[] Nt] Ut] N/AZ anchors?
In-line valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
' Enter the equipment class name from Appendix B: Classes of Equipment.
Not a soft target 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
 
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[-- NE:] U-- N/AM YN NE] UrI N/A[D]Y; NE] U0 N/AD: YN NE] UEI 2 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 113 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE N] UI-Seismic Walkdown Checklist (SWC)                   SWC- 27 Equipment ID No.         HCV-484                   Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 114 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Nn Ut]Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE Other Adverse Conditions
: 5. Is the anchorage configuration consistent with plant documentation?           Y-- Nil ULI N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 11. Have you looked for and found no other seismic conditions that could Y[ Nt] Ut]adversely affect the safety functions of the equipment?
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   NFi-   UI-potentially adverse seismic conditions?
In-line valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[-- NE:] U--    N/AM Not a soft target
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN NE] UrI N/A[D]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y;  NE] U0 N/AD:
: 10. Based on the above seismic interaction evaluations, is equipment free         YN NE] UEI of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 114 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Nn Ut]
Seismic Walkdown Checklist (SWC)                     SWC- 27 Equipment ID No.         HCV-484                   Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could         Y[   Nt] Ut]
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/20/2012 Alex Smerch IdLl_-- _ __ __---__ __8/20/2012
Evaluated by: John Kao                                                               Date: 8/20/2012 Alex Smerch IdLl_       --   _   __       __---__         __8/20/2012
:3 Enter the equipment class name from Appendix B: Classes of Equipment.
:3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 115 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM ND-- URi-Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A COW OUTLET VALVE Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 115 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM ND-- URi-Seismic Walkdown Checklist (SWC)                   SWC- 27 Equipment ID No.         HCV-484                   Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A COW OUTLET VALVE Photographs Note: Equipment.                                                   Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 116 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: Y] NR URII Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. AUX Floor El. 992' Room, Area 4, 10W'D-lN'6D Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 116 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: Y] NR URII Seismic Walkdown Checklist (SWC)                   SWC- 28 Equipment ID No.         HCV-489B                 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Location: Bldg. AUX                 Floor El. 992'           Room, Area 4, 10W'D-lN'6D Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[-] NZ of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Anchorage
Y-I NEI- U-II N/AZ 3. Is the anchorage free of corrosion that is more than mild surface YEI NEI- U-- N/AZ oxidation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-] NZ of the 50% of SWEL items requiring such verification)?
: 4. Is the anchorage free of visible cracks in the concrete near the YLI NEIl UL- N/AZ anchors?Enter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Y-I NEI- U-II N/AZ
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 117 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND] U-I Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 3. Is the anchorage free of corrosion that is more than mild surface             YEI NEI- U--   N/AZ oxidation?
Y[-] NDi UL N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 4. Is the anchorage free of visible cracks in the concrete near the               YLI NEIl UL- N/AZ anchors?
: 6. Based on the above anchorage evaluations, is the anchorage free of YM N[] UL potentially adverse seismic conditions?
Enter the equipment class name from Appendix B: Classes of Equipment.
In-line valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 117 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND]     U-I Seismic Walkdown Checklist (SWC)                   SWC- 28 Equipment ID No.         HCV-489B                 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YZ NDi UI[ N/AD-YZ NO U-- N/AD-I YN NDI UED N/AD-Y ; N-- U--2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 5. Is the anchorage configuration consistent with plant documentation?           Y[-] NDi UL     N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 118 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NE] U7]Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Other Adverse Conditions
: 6. Based on the above anchorage evaluations, is the anchorage free of           YM N[] UL potentially adverse seismic conditions?
: 11. Have you looked for and found no other seismic conditions that could YZ NE] UE--adversely affect the safety functions of the equipment?
In-line valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YZ NDi    UI[  N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NO U--      N/AD-I and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN NDI    UED N/AD-
: 10. Based on the above seismic interaction evaluations, is equipment free         Y ; N--    U--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 118 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NE] U7]
Seismic Walkdown Checklist (SWC)                    SWC- 28 Equipment ID No.        HCV-489B                  Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could          YZ NE] UE--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao                                                                Date: 8/20/2012 8//
Alex Smerch I'LI-r                      *"'--'--'..8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 119 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM ND UD Seismic Walkdown Checklist (SWC)                    SWC- 28 Equipment ID No.        HCV-489B                  Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Photographs Note: Equipment.                                                  Note:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 120 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NDI U-I Seismic Walkdown Checklist (SWC)                    SWC- 29 Equipment ID No.        HCV-497                  Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Location: Bldg. AUX                  Floor El. 991'          Room, Area 4, 2E'E-8S'7A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
: 1. Is the anchorage configuration verification required (i.e., is the item one  Y[I NEK of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?            Y[I- N[l ULi N/AZ
: 3. Is the anchorage free of corrosion that is more than mild surface            YEi NiD ULi N/AZ oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the              YD NE] UD N/AZ anchors?
I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 121 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN NR U-I Seismic Walkdown Checklist (SWC)                    SWC- 29 Equipment ID No.        HCV-497                  Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE
: 5. Is the anchorage configuration consistent with plant documentation?          YFj NE] UD-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of            YZ ND U0-I potentially adverse seismic conditions?
In-line valve.
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?          YE] N-- UD]      N/A[Z
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,    YO-'  NI U0] N/AZ and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                  YDI    NEI UD- N/A[Z
: 10. Based on the above seismic interaction evaluations, is equipment free        YZ NI U-of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 122 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Ni I    U--
Seismic Walkdown Checklist (SWC)                   SWC- 29 Equipment ID No.         HCV-497                  Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN    NE] U-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/20/2012 Alex Smerch I 'LI-r 8//
Evaluated by: John Kao                                                             Date: 8/20/2012 Alex Smerch / *-                                                         8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 119 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM ND UD Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Photographs Note: Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 123 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN N[--    UL-Seismic Walkdown Checklist (SWC)                   SWC- 29 Equipment ID No.       HCV-497                  Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Photographs 4 Enter the equipment class name from Appendix B: Classes of Equipment.
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 120 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ ND I U-I Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Location:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 124 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE NR UD Seismic Walkdown Checklist (SWC)                     SWC- 30 Equipment ID No.         TCV-893                  Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Location: Bldg. AUX                 Floor El. 1037'         Room, Area 72, 8W'JI-12N'7A Manufacturer, Model, Etc. (optional but recommended)
Bldg. AUX Floor El. 991' Room, Area 4, 2E'E-8S'7A Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Anchorage
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[I NEK of the 50% of SWEL items requiring such verification)?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YE] NO of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Y[-- ND:] UDJ N/AZ
Y[I- N[l ULi N/AZ 3. Is the anchorage free of corrosion that is more than mild surface YEi NiD ULi N/AZ oxidation?
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[-] ND-] u[-] N/AZ oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the YD NE] UD N/AZ anchors?I Enter the equipment class name from Appendix B: Classes of Equipment.
: 4. Is the anchorage free of visible cracks in the concrete near the               Y--  ND- U0 N/AM anchors?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 121 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN NR U-I Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
I Enter the equipment class name from Appendix B: Classes of Equipment.
YFj NE] UD-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
 
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ ND U0-I potentially adverse seismic conditions?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 125 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN NI- U--
In-line valve.Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Seismic Walkdown Checklist (SWC)                   SWC- 30 Equipment ID No.         TCV-893                  Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 5. Is the anchorage configuration consistent with plant documentation?         YOI NEI    UOi N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YE] N-- UD] N/A[Z YO-' NI U0] N/AZ YDI NEI UD- N/A[Z YZ NI U-2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[  NI- u--
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 122 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Ni I U--Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Other Adverse Conditions
potentially adverse seismic conditions?
: 11. Have you looked for and found no other seismic conditions that could YN NE] U-adversely affect the safety functions of the equipment?
In-line valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YOI  NDI  UD N/A[
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YN NEI Ui      N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ ND UD N/AZ
: 10. Based on the above seismic interaction evaluations, is equipment free       YX NO UD of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 126 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NR UL-I Seismic Walkdown Checklist (SWC)                   SWC- 30 Equipment ID No.         TCV-893                  Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could         YZ N[:    UI--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/20/2012 Alex Smerch / 8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                               Date: 8/18/2012 Alex Smerch       Ll-    __ _      __---_              __ _ _  _8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 123 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN N[-- UL-Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Photographs 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 124 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE NR UD Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Location:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 127 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[   Nn] Ut]
Bldg. AUX Floor El. 1037' Room, Area 72, 8W'JI-12N'7A Manufacturer, Model, Etc. (optional but recommended)
Seismic Walkdown Checklist (SWC)                     SWC- 30 Equipment ID No.       TCV-893                  Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Photographs Note: Equipment.                                                  Note:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
 
YE] NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 128 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y9 N-- U--
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?Y[-- ND:] UDJ N/AZ Y[-] ND-] u[-] N/AZ Y-- ND- U0 N/AM I Enter the equipment class name from Appendix B: Classes of Equipment.
Seismic Walkdown Checklist (SWC)                     SWC- 31 Equipment ID No.         HCV-2874A                Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description         RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Location: Bldg.     INTAKE          Floor El. 1001'         Room, Area INTAKE, 6E'CC-4S'103 Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 125 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN NI- U--Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE 5. Is the anchorage configuration consistent with plant documentation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YOI NEI UOi N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage
: 6. Based on the above anchorage evaluations, is the anchorage free of Y[ NI- u--potentially adverse seismic conditions?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YLI NE of the 50% of SWEL items requiring such verification)?
In-line valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Yi-] NE]l Ui-] N/A In-line valve.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 3. Is the anchorage free of corrosion that is more than mild surface             YEll N ll UI--  N/AZ oxidation?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YOI NDI UD N/A[YN NEI Ui N/AD YZ ND UD N/AZ YX NO UD 2 Enter the equipment class name from Appendix B: Classes of Equipment.
In-line valve.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 126 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NR UL-I Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Other Adverse Conditions
: 4. Is the anchorage free of visible cracks in the concrete near the               YEll NEl UI- N/AZ anchors?
: 11. Have you looked for and found no other seismic conditions that could YZ N[: UI--adversely affect the safety functions of the equipment?
In-line valve.
I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 129 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN   ND- UD--
Seismic Walkdown Checklist (SWC)                   SWC- 31 Equipment ID No.         HCV-2874A                Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description         RAW WATER PUMPS DISCH HEADER ISOLATION VALVE
: 5. Is the anchorage configuration consistent with plant documentation?           YOI ND UD N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ ND UD--
potentially adverse seismic conditions?
N/A In line valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YO NDI uD N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN ND UD" N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[  ND UD N/AD
: 10. Based on the above seismic interaction evaluations, is equipment free         YN ND-- UD-1 of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 130 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM NFi-    UI-Seismic Walkdown Checklist (SWC)                   SWC- 31 Equipment ID No.         HCV-2874A                Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description         RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN N[il URI-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/18/2012 Alex Smerch Ll-__ _ __---_ __ _ _ _8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch 11L'                                                      Date: 8/17/2012 John Kao                                                                8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 127 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ Nn] Ut]Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 131 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Ni1 UI--
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 128 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y9 N-- U--Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Location:
Seismic Walkdown Checklist (SWC)                   SWC- 31 Equipment ID No.         HCV-2874A                Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description         RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Photographs Note: Equipment.                                                   Note:
Bldg. INTAKE Floor El. 1001' Room, Area INTAKE, 6E'CC-4S'103 Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YLI NE of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 132 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YE NFi      ULI Seismic Walkdown Checklist (SWC)                   SWC- 32 Equipment ID No.       HCV-2875A                Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Location: Bldg. INTAKE             Floor El. 1001           Room, Area INTAKE, 6E'CC-7N'103 Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Yi-] NE]l Ui-] N/A In-line valve.3. Is the anchorage free of corrosion that is more than mild surface YEll N ll UI-- N/AZ oxidation?
Anchorage
In-line valve.4. Is the anchorage free of visible cracks in the concrete near the YEll NEl UI- N/AZ anchors?In-line valve.I Enter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   YO- NO of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 129 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND- UD--Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YEI  Ni    UEi N/AN In-line valve.
YOI ND UD N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[-] NOI-  UI- N/A[
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ ND UD--potentially adverse seismic conditions?
oxidation?
N/A In line valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
In-line valve.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 4. Is the anchorage free of visible cracks in the concrete near the             Y[-] NFO uLI- N/A[
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YO NDI uD N/AZ YN ND UD" N/AD Y[ ND UD N/AD YN ND-- UD-1 2 Enter the equipment class name from Appendix B: Classes of Equipment.
anchors?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 130 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM NFi- UI-Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Other Adverse Conditions
In-line valve.
: 11. Have you looked for and found no other seismic conditions that could YN N[il URI-adversely affect the safety functions of the equipment?
Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 133 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE] ULI Seismic Walkdown Checklist (SWC)                   SWC- 32 Equipment ID No.         HCV-2875A                Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE
: 5. Is the anchorage configuration consistent with plant documentation?           YE]- NEI  ULi N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
In-line valve.
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ NE] UE]
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YE] NE] UE] N/AN
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YE NE] UE] N/AE]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ NE] UE] N/AE-]
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[    NE] UE of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 134 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE Ni D U--
Seismic Walkdown Checklist (SWC)                   SWC- 32 Equipment ID No.         HCV-2875A                Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ NE] U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch 1 1L'John Kao Date: 8/17/2012 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch Al              _ _    _    __-,_              _  _    Date: 8/17/2012 John Kao                                                                8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 131 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Ni1 UI--Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 135 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM Ni I    UD Seismic Walkdown Checklist (SWC)                     SWC- 32 Equipment ID No.         HCV-2875A                Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Photographs Note: Equipment Tag.                                               Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 132 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YE NFi ULI Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment
Bldg. INTAKE Floor El. 1001 Room, Area INTAKE, 6E'CC-7N'103 Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 136 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YX NR U[*
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YO- NO of the 50% of SWEL items requiring such verification)?
Seismic Walkdown Checklist (SWC)                     SWC- 33 Equipment ID No.         HCV-2877A                Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Location: Bldg.     AUX                      993'          Room, Area 18, 13E'D-12S'6D Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YEI Ni UEi N/AN In-line valve.3. Is the anchorage free of corrosion that is more than mild surface Y[-] NOI- UI- N/A[oxidation?
Anchorage
In-line valve.4. Is the anchorage free of visible cracks in the concrete near the Y[-] NFO uLI- N/A[anchors?In-line valve.Enter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   YOI  NZ of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 133 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE] ULI Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
In-line valve.
YE]- NEI ULi N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Y[:] NF] UL    N/A]
In-line valve.6. Based on the above anchorage evaluations, is the anchorage free of YZ NE] UE]potentially adverse seismic conditions?
In-line valve.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[-] N[-] U[-] N/AZ oxidation?
YE] NE] UE] N/AN 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YE NE] UE] N/AE]and masonry block walls not likely to collapse onto the equipment?
In-line valve.
: 9. Do attached lines have adequate flexibility to avoid damage?YZ NE] UE] N/AE-]10. Based on the above seismic interaction evaluations, is equipment free Y[ NE] UE of potentially adverse seismic interaction effects?2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 4. Is the anchorage free of visible cracks in the concrete near the               YE] Ni[] LID N/AZ anchors?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 134 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE Ni D U--Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Other Adverse Conditions
In-line valve.
: 11. Have you looked for and found no other seismic conditions that could YZ NE] U-I adversely affect the safety functions of the equipment?
' Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 137 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ N--    U[--
Seismic Walkdown Checklist (SWC)                   SWC- 33 Equipment ID No.         HCV-2877A                Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE
: 5. Is the anchorage configuration consistent with plant documentation?           Y[-] NDi  ULI N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
In-line valve.
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y Z NE[-I ULFI potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YDI NDl uiD N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     Y[  NE   UI-] N/ADI and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[K ND] Ur-    N/AD-I
: 10. Based on the above seismic interaction evaluations, is equipment free         YM ND UD of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 138 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[    NF1 U-1 Seismic Walkdown Checklist (SWC)                     SWC- 33 Equipment ID No.       HCV-2877A                Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ NO UD adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch Al_ _ _ __-,_ _ _ Date: 8/17/2012 John Kao 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch /[*-           _   _     _     _     _   _ _ _   _   Date: 8/21/2012 John Kao                                                                 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 135 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM Ni I UD Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Photographs Note: Equipment Tag.Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 136 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YX NR Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Location:
 
Bldg. AUX 993' Room, Area 18, 13E'D-12S'6D Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 139 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ   N-II UD-Seismic Walkdown Checklist (SWC)                   SWC- 33 Equipment ID No.         HCV-2877A                 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Photographs Note: Equipment.                                                   Note:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YOI NZ of the 50% of SWEL items requiring such verification)?
 
In-line valve.2. Is the anchorage free of bent, broken, missing or loose hardware?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 140 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YE N-i     ULI Seismic Walkdown Checklist (SWC)                     SWC- 34 Equipment ID No.         HCV-2880A                 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Location: Bldg. AUX                           994'           Room, Area 18, 13E'D-6S'6D Manufacturer, Model, Etc. (optional but recommended)
Y[:] NF] UL N/A]In-line valve.3. Is the anchorage free of corrosion that is more than mild surface Y[-] N[-] U[-] N/AZ oxidation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
In-line valve.4. Is the anchorage free of visible cracks in the concrete near the YE] Ni[] LID N/AZ anchors?In-line valve.' Enter the equipment class name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 137 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ N-- U[--Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YE] NZ of the 50% of SWEL items requiring such verification)?
Y[-] NDi ULI N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YE] NE]   U-II N/AZ In-line valve.
In-line valve.6. Based on the above anchorage evaluations, is the anchorage free of Y Z NE[-I ULFI potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface             YE] N--   UEl N/AZ oxidation?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
In-line valve.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 4. Is the anchorage free of visible cracks in the concrete near the               YE] NE] UE] N/AN anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YDI NDl uiD N/AZ Y[ NE UI-] N/AD I Y[K ND] Ur- N/AD-I YM ND UD 2 Enter the equipment class name from Appendix B: Classes of Equipment.
In-line valve.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 138 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NF1 U-1 Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Other Adverse Conditions
Enter the equipment class name from Appendix B: Classes of Equipment.
: 11. Have you looked for and found no other seismic conditions that could adversely affect the safety functions of the equipment?
 
YZ NO UD Comments (Additional pages may be added as necessary)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 141 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NI- U--
Evaluated by: Alex Smerch _ _ _ _ _ _ _ _ _ Date: 8/21/2012 John Kao 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Seismic Walkdown Checklist (SWC)                     SWC- 34 Equipment ID No.         HCV-2880A                 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 139 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ N-II UD-Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Photographs Note: Equipment.
: 5. Is the anchorage configuration consistent with plant documentation?         Y-I NE] U[-] N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
In-line valve.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 140 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YE N-i ULI Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Location:
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ NEi     Ur]
Bldg. AUX 994' Room, Area 18, 13E'D-6S'6D Manufacturer, Model, Etc. (optional but recommended)
potentially adverse seismic conditions?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
In-line valve.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YE] NZ of the 50% of SWEL items requiring such verification)?
Interaction Effects
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
: 7. Are soft targets free from impact by nearby equipment or structures?         YE] NE]1 uE] N/AN
YE] NE] U-II N/AZ In-line valve.3. Is the anchorage free of corrosion that is more than mild surface YE] N-- UEl N/AZ oxidation?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   Y[  NEi UE- N/AE]
In-line valve.4. Is the anchorage free of visible cracks in the concrete near the YE] NE] UE] N/AN anchors?In-line valve.Enter the equipment class name from Appendix B: Classes of Equipment.
and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 141 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NI- U--Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[9 NE] urE- NIAE]
Y-I NE] U[-] N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[  N[] UE]
In-line valve.6. Based on the above anchorage evaluations, is the anchorage free of YZ NEi Ur]potentially adverse seismic conditions?
of potentially adverse seismic interaction effects?
In-line valve.Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
 
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YE] NE]1 uE] N/AN Y[ NEi UE- N/AE]Y[9 NE] urE- NIAE]Y[ N[] UE]2 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 142 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE NI-D   UL--
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 142 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE NI-D UL--Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Other Adverse Conditions
Seismic Walkdown Checklist (SWC)                     SWC- 34 Equipment ID No.         HCV-2880A                 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could Y[ NE] U--adversely affect the safety functions of the equipment?
: 11. Have you looked for and found no other seismic conditions that could       Y[   NE] U--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch A ---John Kao Date: 8/21/2012 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch       /*<      A ---                                     Date: 8/21/2012 John Kao                                                                8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 143 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NF] UL--Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Photographs Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 144 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ Nl U-II Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO CCW ISOLATION VALVE Location:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 143 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NF]     UL--
Bldg. AUX 993' Room, Area 18, 13E'D-19S'6D Manufacturer, Model, Etc. (optional but recommended)
Seismic Walkdown Checklist (SWC)                   SWC- 34 Equipment ID No.         HCV-2880A                 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Photographs Note:
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[-] NO of the 50% of SWEL items requiring such verification)?
 
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 144 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[   Nl U-II Seismic Walkdown Checklist (SWC)                   SWC- 35 Equipment ID No.       HCV-2893                 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO CCW ISOLATION VALVE Location: Bldg. AUX                     993'           Room, Area 18, 13E'D-19S'6D Manufacturer, Model, Etc. (optional but recommended)
YEI N] U[i-I N/A 3. Is the anchorage free of corrosion that is more than mild surface Y[-] N[D UD] N/A[oxidation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. Is the anchorage free of visible cracks in the concrete near the YLI NiD UDl N/AZK anchors?IEnter the equipmentclass name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 145 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NR] UI-Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO COW ISOLATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-] NO of the 50% of SWEL items requiring such verification)?
YEI NEI UiI N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YEI N] U[i-I N/A
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ NEi Ut]potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[-] N[D UD] N/A[
In-line valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
oxidation?
Not a soft target 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 4. Is the anchorage free of visible cracks in the concrete near the               YLI NiD UDl N/AZK anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YE] NE] Ut] N/AZ YN NEI U-- N/At:]Y[ NEI u0- N/At-]YN NEI Ut]2 Enter the equipment class name from Appendix B: Classes of Equipment.
IEnter the equipmentclass name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 146 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NF] UM Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO CCW ISOLATION VALVE Other Adverse Conditions
 
: 11. Have you looked for and found no other seismic conditions that could YN N[I] UI-adversely affect the safety functions of the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 145 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NR] UI-Seismic Walkdown Checklist (SWC)                   SWC- 35 Equipment ID No.         HCV-2893                 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO COW ISOLATION VALVE
: 5. Is the anchorage configuration consistent with plant documentation?           YEI NEI   UiI N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ NEi     Ut]
potentially adverse seismic conditions?
In-line valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YE] NE] Ut] N/AZ Not a soft target
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN NEI U-- N/At:]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[  NEI u0- N/At-]
: 10. Based on the above seismic interaction evaluations, is equipment free         YN NEI Ut]
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 146 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NF] UM Seismic Walkdown Checklist (SWC)                   SWC- 35 Equipment ID No.         HCV-2893                 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO CCW ISOLATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN N[I] UI-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch /'- A L'John Kao F*Date: 8/21/2012 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch /'-             A L'                                     Date: 8/21/2012 John Kao F*                                                            8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 147 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NEI UDl Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO 0CW ISOLATION VALVE Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 147 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NEI     UDl Seismic Walkdown Checklist (SWC)                   SWC- 35 Equipment ID No.         HCV-2893                 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO 0CW ISOLATION VALVE Photographs Note: Equipment.                                                   Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 148 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE NiD UI-Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. CONT Floor El. 1045' Room, Area CONT, 14W'DD-6N'II Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 148 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE NiD UI-Seismic Walkdown Checklist (SWC)                   SWC- 36 Equipment ID No.       HCV-240                   Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Location: Bldg. CONT           Floor El. 1045'         Room, Area CONT, 14W'DD-6N'II Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YO-- NN of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Anchorage
YE] NEI- u-I N/A[3. Is the anchorage free of corrosion that is more than mild surface Y[I- N[ll U[i N/AZ oxidation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YO-- NN of the 50% of SWEL items requiring such verification)?
: 4. Is the anchorage free of visible cracks in the concrete near the YO-- NEl U[-] N/A anchors?IEnter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YE] NEI- u-I N/A[
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 149 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND UD-1 Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[I- N[ll U[i N/AZ oxidation?
YE] NE] U-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 4. Is the anchorage free of visible cracks in the concrete near the               YO-- NEl U[-] N/A anchors?
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ NE] ULII potentially adverse seismic conditions?
IEnter the equipment class name from Appendix B: Classes of Equipment.
In Line Valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
Not a soft target 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonryblock walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 149 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND UD-1 Seismic Walkdown Checklist (SWC)                   SWC- 36 Equipment ID No.         HCV-240                   Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YD] ND J UD-- N/AZ YN NE] U-I N/AD I YN ND] UD! N/AD-]YZ NDl UDl 2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 5. Is the anchorage configuration consistent with plant documentation?           YE] NE] U--     N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 150 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ ND U[-Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Other Adverse Conditions
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ NE] ULII potentially adverse seismic conditions?
: 11. Have you looked for and found no other seismic conditions that could Y[ NE] U--adversely affect the safety functions of the equipment?
In Line Valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YD] NDJ UD-- N/AZ Not a soft target
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN NE] U-I N/ADI and masonryblock walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN ND] UD! N/AD-]
: 10. Based on the above seismic interaction evaluations, is equipment free         YZ NDl UDl of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 150 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ ND U[-
Seismic Walkdown Checklist (SWC)                    SWC- 36 Equipment ID No.        HCV-240                  Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could      Y[    NE] U--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary) k~Zo Evaluated by: John Kao                                                              Date: 8/22112 Alex Smerch'ilL          /1*                                            8/22112 3 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 151 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[    NF U-Seismic Walkdown Checklist (SWC)                    SWC- 36 Equipment ID No.        HCV-240                  Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Photographs Note: Equipment.                                                  Note:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 152 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[    N--1 U--1 Seismic Walkdown Checklist (SWC)                    SWC- 37 Equipment ID No.        LCV-218-3                Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Location: Bldg. AUX                  Floor El. 992'          Room, Area  7, 45W'T-2N'7B Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Anchorage
: 1. Is the anchorage configuration verification required (i.e., is the item one  Y[    NO of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?              YN Nr      U-- N/A[:
: 3. Is the anchorage free of corrosion that is more than mild surface              YN N-      U[I N/AD--
oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the              Y[    N-  U[: N/AD-anchors?
I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 153 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND-- U-I Seismic Walkdown Checklist (SWC)                    SWC- 37 Equipment ID No.        LCV-218-3                Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV
: 5. Is the anchorage configuration consistent with plant documentation?            YO NN    U-I N/AD (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Needs plant documentation to verify. See sketch in photos section.
Licensing Basis Evaluation is required.
: 6. Based on the above anchorage evaluations, is the anchorage free of            YD--  NN UD potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?          YN ND UDl N/A[-]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,    Y[  ND UDi N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                  YZ ND UD N/AD
: 10. Based on the above seismic interaction evaluations, is equipment free        YN ND UD--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 154 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NiI    UFi--
Seismic Walkdown Checklist (SWC)                   SWC- 37 Equipment ID No.         LCV-218-3                Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1AB&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   NEil UI--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao k~Zo Date: 8/22112 Alex Smerch' ilL8/22112 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch JIL'                                                      Date: 8/20/12 Va"o John Kao                                                                 8/20/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 151 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ NF U-Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 155 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[   NE] UE-Seismic Walkdown Checklist (SWC)                   SWC- 37 Equipment ID No.         LCV-218-3                Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A.B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Photographs
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 152 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ N--1 U--1 Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Location:
                                                                              -7 Note: Equipment.                                                   Note: Sketch of plan view of vertical I-beam support anchorage.
Bldg. AUX Floor El. 992' Room, Area 7, 45W'T-2N'7B Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 156 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NR U-Seismic Walkdown Checklist (SWC)                     SWC- 38 Equipment ID No.         FCV-1369                  Equip. Class, 7. PNEUMATIC-OPERATED VALVES Equipment Description         TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Location: Bldg. AUX                 Floor El. 991'           Room, Area 19, 3W'C-7N'3AA Manufacturer, Model, Etc. (optional but recommended)
Y[ NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YN Nr U-- N/A[: YN N- U[I N/AD--Y[ N- U[: N/AD-I Enter the equipment class name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 153 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND-- U-I Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV 5. Is the anchorage configuration consistent with plant documentation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YOI  NM of the 50% of SWEL items requiring such verification)?
YO NN U-I N/AD (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YEI NE] ULi N/A[
Needs plant documentation to verify. See sketch in photos section.Licensing Basis Evaluation is required.6. Based on the above anchorage evaluations, is the anchorage free of YD-- NN UD potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[I-  N[Il U[I- N/AN oxidation?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 4. Is the anchorage free of visible cracks in the concrete near the               YF-] N[:] UL-] N/AN anchors?
YN ND UDl N/A[-]8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ ND UDi N/AD and masonry block walls not likely to collapse onto the equipment?
I Enter the equipment class name from Appendix B: Classes of Equipment.
: 9. Do attached lines have adequate flexibility to avoid damage?YZ ND UD N/AD 10. Based on the above seismic interaction evaluations, is equipment free YN ND UD--of potentially adverse seismic interaction effects?2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 154 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NiI UFi--Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1AB&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Other Adverse Conditions
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 157 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y] NR UR Seismic Walkdown Checklist (SWC)                   SWC- 38 Equipment ID No.         FCV-1369                  Equip. ClasS2 7, PNEUMATIC-OPERATED VALVES Equipment Description         TURB-DRIVEN AUX FEED PUMPFW-10 RECIRCULATION VALVE
: 11. Have you looked for and found no other seismic conditions that could Y[ NEil UI--adversely affect the safety functions of the equipment?
: 5. Is the anchorage configuration consistent with plant documentation?         Y-I NEI    ULi N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YO ND-] UD-potentially adverse seismic conditions?
N/A Inline Valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y-I NE:l UiD N/A[
Valve is not a soft target.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YD- NZ Ul N/AD and masonry block walls not likely to collapse onto the equipment?
Unistrut above missing clamp and just resting on support. Could fall.
CR 2012-10198 has been initiated.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ NEil UD- N/AD-]
There are multiple elbows for attached line showing flexibility.
: 10. Based on the above seismic interaction evaluations, is equipment free       YDI NZ u-D of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 158 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[Z Ni-- UP Seismic Walkdown Checklist (SWC)                   SWC- 38 Equipment ID No.         FCV-1369                  Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description         TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could         Y[   NEil Ui-adversely affect the safety functions of the equipment?
There is a chain attached. This item is not seen as a credible source as it does not have much mass.
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch JIL'John Kao Date: 8/20/12 Va"o 8/20/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch 1U,            "    _        _._                _      Date: 8/13/12 John Kao                                                                  8113/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 155 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ NE] UE-Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A.B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Photographs
 
-7 Note: Sketch of plan view of vertical I-beam support anchorage.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 159 OF 403 SEISMIC WALKDOWN CHECKLIST FoRM Sheet 4 of 4 Status: YIN ND-- U-]
Note: Equipment.
Seismic Walkdown Checklist (SWC)                   SWC- 38 Equipment ID No.         FCV-1369                  Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Photographs Note: Unistrut Missing Clamp.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 156 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NR U-Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. Class, 7. PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Location:
 
Bldg. AUX Floor El. 991' Room, Area 19, 3W'C-7N'3AA Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 160 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NI 1 UD-1 Seismic Walkdown Checklist (SWC)                   SWC- 39 Equipment ID No.         HCV-1 107A               Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Location: Bldg. CONT                 Floor El. 1050'         Room, Area CONT, 15W'BB-9N'II Manufacturer, Model, Etc. (optional but recommended)
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YOI NM of the 50% of SWEL items requiring such verification)?
Anchorage
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[I NO of the 50% of SWEL items requiring such verification)?
YEI NE] ULi N/A[3. Is the anchorage free of corrosion that is more than mild surface Y[I- N[Il U[I- N/AN oxidation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NEI    UD- N/AD-
: 4. Is the anchorage free of visible cracks in the concrete near the YF-] N[:] UL-] N/AN anchors?I Enter the equipment class name from Appendix B: Classes of Equipment.
: 3. Is the anchorage free of corrosion that is more than mild surface             YN ND I UJ N/AD oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 157 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y] NR UR Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. ClasS2 7, PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-10 RECIRCULATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 4. Is the anchorage free of visible cracks in the concrete near the               YN ND--   UD-- N/AD--
Y-I NEI ULi N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
anchors?
: 6. Based on the above anchorage evaluations, is the anchorage free of YO ND-] UD-potentially adverse seismic conditions?
I Enter the equipment class name from Appendix B: Classes of Equipment.
N/A Inline Valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
Valve is not a soft target.Y-I NE:l UiD N/A[8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 161 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   NR U-Seismic Walkdown Checklist (SWC)                     SWC- 39 Equipment ID No.         HCV-1107A                 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE
Unistrut above missing clamp and just resting on support. Could fall.CR 2012-10198 has been initiated.
: 5. Is the anchorage configuration consistent with plant documentation?           Y-I NEI   U-] N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 9. Do attached lines have adequate flexibility to avoid damage?There are multiple elbows for attached line showing flexibility.
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ N[-] U[-D potentially adverse seismic conditions?
: 10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YD- NZ Ul N/AD YZ NEil UD- N/AD-]YDI NZ u-D 2 Enter the equipment class name from Appendix B: Classes of Equipment.
Interaction Effects
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 158 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[Z Ni-- UP Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Other Adverse Conditions
: 7. Are soft targets free from impact by nearby equipment or structures?         YZ ND] UF- N/ADl
: 11. Have you looked for and found no other seismic conditions that could Y[ NEil Ui-adversely affect the safety functions of the equipment?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NEIl UD N/AD1 and masonry block walls not likely to collapse onto the equipment?
There is a chain attached.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ NDI U-- N/AD
This item is not seen as a credible source as it does not have much mass.Comments (Additional pages may be added as necessary)
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[   ND] UL-of potentially adverse seismic interaction effects?
Evaluated by: Alex Smerch 1U," _ _._ _ Date: 8/13/12 John Kao 8113/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
2 Enter tie equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 159 OF 403 SEISMIC WALKDOWN CHECKLIST FoRM Sheet 4 of 4 Status: YIN ND-- U-]Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Photographs Note: Unistrut Missing Clamp.4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 160 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NI 1 UD-1 Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1 107A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Location:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 162 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[     NFI U-Seismic Walkdown Checklist (SWC)                   SWC- 39 Equipment ID No.         HCV-1107A                 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Other Adverse Conditions
Bldg. CONT Floor El. 1050' Room, Area CONT, 15W'BB-9N'II Manufacturer, Model, Etc. (optional but recommended)
: 11. Have you looked for and found no other seismic conditions that could       YN NE[] U-I adversely affect the safety functions of the equipment?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[I NO of the 50% of SWEL items requiring such verification)?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YZ NEI UD- N/AD-YN ND I UJ N/AD YN ND-- UD-- N/AD--I Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 161 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NR U-Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1107A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE 5. Is the anchorage configuration consistent with plant documentation?
Y-I NEI U-] N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?
YZ N[-] U[-D Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
YZ ND] UF- N/ADl 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEIl UD N/AD1 and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?YZ NDI U-- N/AD 10. Based on the above seismic interaction evaluations, is equipment free Y[ ND] UL-of potentially adverse seismic interaction effects?2 Enter tie equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 162 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NFI U-Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1107A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could YN NE[] U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/22/2012 Alex Smerch 'L-8/
Evaluated by: John Kao                                                             Date: 8/22/2012 8/
3 Enter the equipment class name from Appendix B: Classes of Equipment.
                                  'L-                   "/*/"--m..*8/22/2012 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 163 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND-- UD--Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1107A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Photographs No photographs were able to be taken of the item.Note: Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 164 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND I Ui-Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Location:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 163 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ   ND-- UD--
Bldg. AUX Floor El. 1038' Room, Area 81, OW'H-4N'3A Manufacturer, Model, Etc. (optional but recommended)
Seismic Walkdown Checklist (SWC)                     SWC- 39 Equipment ID No.         HCV-1107A                 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Photographs No photographs were able to be taken of the item.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Note:                                                             Note:
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YE NFI of the 50% of SWEL items requiring such verification)?
4 Enter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
 
YN ND] ULi N/A[-D 3. Is the anchorage free of corrosion that is more than mild surface Y[ NDl UI- N/A--oxidation?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 164 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND     IUi-Seismic Walkdown Checklist (SWC)                   SWC- 40 Equipment ID No.       HCV-1107B                 Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Location: Bldg. AUX                 Floor El. 1038'         Room, Area 81, OW'H-4N'3A Manufacturer, Model, Etc. (optional but recommended)
: 4. Is the anchorage free of visible cracks in the concrete near the YN ND] UDl N/AD anchors?Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 165 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND U--I Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE 5. Is the anchorage configuration consistent with plant documentation?
Anchorage
YEI NN UD N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 1. Is the anchorage configuration verification required (i.e., is the item one   YE NFI of the 50% of SWEL items requiring such verification)?
Needs plant documentation to verify anchorage.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YN ND] ULi N/A[-D
See sketch in photos section. Licensing Basis Evaluation is required.6. Based on the above anchorage evaluations, is the anchorage free of YEI NM U-I potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[   NDl UI- N/A--
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
oxidation?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 4. Is the anchorage free of visible cracks in the concrete near the               YN ND] UDl N/AD anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YZ NDl UD- N/AD-YZ NDI uDl N/ADl Y[ NDI UDl N/AD-YZ NiDI UDl 2 Enter the equipment class name from Appendix B: Classes of Equipment.
Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 166 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: YZ NE] U--Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Other Adverse Conditions
 
: 11. Have you looked for and found no other seismic conditions that could YZ NE] UI-adversely affect the safety functions of the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 165 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ   ND U--I Seismic Walkdown Checklist (SWC)                     SWC- 40 Equipment ID No.         HCV-1107B                 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE
: 5. Is the anchorage configuration consistent with plant documentation?           YEI NN UD N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Needs plant documentation to verify anchorage.See sketch in photos section. Licensing Basis Evaluation is required.
: 6. Based on the above anchorage evaluations, is the anchorage free of           YEI NM U-I potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YZ NDl UD- N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NDI uDl      N/ADl and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[  NDI UDl N/AD-
: 10. Based on the above seismic interaction evaluations, is equipment free         YZ NiDI UDl of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 166 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: YZ NE] U--
Seismic Walkdown Checklist (SWC)                     SWC- 40 Equipment ID No.         HCV-1107B                 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YZ NE] UI-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch Al Date: 8/18/2012 John Kao U 8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch Al                                                       Date: 8/18/2012 John Kao       U                                                       8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 167 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YX NL-1 U-Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1 107B Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Photographs Note: Equipment and supports.Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 168 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YO N-- U-Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Classw 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Note: Vertical Support Footprint.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 167 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YX NL-1 U-Seismic Walkdown Checklist (SWC)                     SWC- 40 Equipment ID No.         HCV-1 107B               Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Photographs Note: Equipment and supports.                                     Note:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 168 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YO N--     U-Seismic Walkdown Checklist (SWC)                     SWC- 40 Equipment ID No.         HCV-1107B                 Equip. Classw 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Note:     Vertical Support Footprint.
5 Enter the equipment class name from Appendix B: Classes of Equipment.
5 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 169 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN NF] U--Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Location:
 
Bldg. AUX Floor El. 1039' Room, Area 81,22E'D-21N'5B Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 169 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN NF] U--
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Seismic Walkdown Checklist (SWC)                     SWC- 41 Equipment ID No.         HCV-1384                 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Location: Bldg. AUX                 Floor El. 1039'         Room, Area 81,22E'D-21N'5B Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y[:] NN of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Anchorage
Y[] N[l UL-I N/A 3. Is the anchorage free of corrosion that is more than mild surface YEi N[l U[I] N/AZ oxidation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[:] NN of the 50% of SWEL items requiring such verification)?
: 4. Is the anchorage free of visible cracks in the concrete near the YE- NE U[:] N/AN anchors?I Enter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Y[] N[l UL-I N/A
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 170 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NEI U-I Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 3. Is the anchorage free of corrosion that is more than mild surface             YEi N[l U[I] N/AZ oxidation?
YOI N- UO-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 4. Is the anchorage free of visible cracks in the concrete near the               YE- NE     U[:] N/AN anchors?
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ N[--i U-I potentially adverse seismic conditions?
I Enter the equipment class name from Appendix B: Classes of Equipment.
In-line valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 170 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   NEI U-I Seismic Walkdown Checklist (SWC)                   SWC- 41 Equipment ID No.         HCV-1384                 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YO ND UD N/AZ YN ND UD N/AD YZ NDI UD N/A[D YN N[D U--2 Enter the equipment class name from Appendix B: Classes of Equipment.
: 5. Is the anchorage configuration consistent with plant documentation?         YOI N-   UO-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 171 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N- ULIM Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Other Adverse Conditions
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ N[--i U-I potentially adverse seismic conditions?
: 11. Have you looked for and found no other seismic conditions that could Y[ N[I Ui-adversely affect the safety functions of the equipment?
In-line valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YO ND UD N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   YN ND UD N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ NDI UD N/A[D
: 10. Based on the above seismic interaction evaluations, is equipment free       YN N[D U--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 171 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N-     ULIM Seismic Walkdown Checklist (SWC)                   SWC- 41 Equipment ID No.         HCV-1384                 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   N[I   Ui-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Alex Smerch &#xa3; " Date: 8/18/2012 8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                             Date: 8/18/2012 Alex Smerch     &#xa3;         "                                             8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 172 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ ND1 UD Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Photographs I 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 173 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN ND-- UD Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Location:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 172 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[   ND1 UD Seismic Walkdown Checklist (SWC)                   SWC- 41 Equipment ID No.         HCV-1384                 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Photographs I
Bldg. AUX Floor El. 1008' Room, Area 64, 3W'F-28N'1A Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YO-- NZ of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 173 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN ND-- UD Seismic Walkdown Checklist (SWC)                   SWC- 42 Equipment ID No.       SA-193                   Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Location: Bldg. AUX                 Floor El. 1008'         Room, Area 64, 3W'F-28N'1A Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Y[:] NEI U[I: N/AZ 3. Is the anchorage free of corrosion that is more than mild surface Y[-] N[-] UD- N/AZ oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the Y-I NE] U0i N/AZ anchors?IEnter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   YO-- NZ of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 174 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ Ni 1 UFD Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             Y[:] NEI U[I: N/AZ
YEI N-I U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[-] N[-] UD- N/AZ oxidation?
: 6. Based on the above anchorage evaluations, is the anchorage free of Y[ N[il U[-potentially adverse seismic conditions?
: 4. Is the anchorage free of visible cracks in the concrete near the             Y-I NE] U0i N/AZ anchors?
N/A, In-line valve Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
IEnter the equipment class name from Appendix B: Classes of Equipment.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
 
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[] ND_1 UFD N/AZ YZ NDI UD- N/AD-Y[K NDl UD- N/AD-YN ND] UD 2 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 174 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ Ni 1 UFD Seismic Walkdown Checklist (SWC)                   SWC- 42 Equipment ID No.         SA-193                   Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 175 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ Nn Ut]Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Other Adverse Conditions
: 5. Is the anchorage configuration consistent with plant documentation?           YEI N-I U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 11. Have you looked for and found no other seismic conditions that could Y[ NEI- U-]adversely affect the safety functions of the equipment?
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   N[il U[-
potentially adverse seismic conditions?
N/A, In-line valve Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[] ND_1 UFD N/AZ
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NDI    UD- N/AD-and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[K NDl UD- N/AD-
: 10. Based on the above seismic interaction evaluations, is equipment free         YN ND] UD of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 175 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ Nn Ut]
Seismic Walkdown Checklist (SWC)                   SWC- 42 Equipment ID No.         SA-193                   Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   NEI- U-]
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch _ &I-,_ _ _ _ _ _ Date: 8/15/2012 John Kao 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch _&I-               ,_         _     _       _ _ _     Date: 8/15/2012 John Kao                                                                 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 176 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM NR Ui--Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 176 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM NR Ui--
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 177 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE ND 1 UDl Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class, 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Location:
Seismic Walkdown Checklist (SWC)                   SWC- 42 Equipment ID No.         SA-193                   Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Photographs Note: Equipment.                                                   Note:
Bldg. CONT Floor El. 1060' Room, Area CONT, OW'BB-24N'III Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YO-- NO of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 177 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE ND1 UDl Seismic Walkdown Checklist (SWC)                     SWC- 43 Equipment ID No.         VA-15B                   Equip. Class, 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Location: Bldg.     CONT           Floor El. 1060'         Room, Area CONT, OW'BB-24N'III Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YO ND UD- N/ADl 3. Is the anchorage free of corrosion that is more than mild surface Y[ NDl U[-] N/AI-I oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the YE ND UD-- N/AD anchors?Enter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   YO--   NO of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 178 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND-- UD--Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class2 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO ND UD- N/ADl
Y-I NEI U-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[     NDl U[-] N/AI-I oxidation?
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ NDl UiD potentially adverse seismic conditions?
: 4. Is the anchorage free of visible cracks in the concrete near the               YE ND UD--       N/AD anchors?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Enter the equipment class name from Appendix B: Classes of Equipment.
Large metal housing structure.
 
Y[] NEI UDl N/AZ 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 178 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND-- UD--
Adequately supported polar crane overhead.9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YZ N[-] UrI N/AD-1 YDI NEI UD- N/AZ YZ NLiI U--2 Enter the equipment class name from Appendix B: Classes of Equipment.
Seismic Walkdown Checklist (SWC)                     SWC- 43 Equipment ID No.         VA-15B                   Equip. Class2 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 179 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N-- UMli Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class3 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Other Adverse Conditions
: 5. Is the anchorage configuration consistent with plant documentation?           Y-I NEI   U-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 11. Have you looked for and found no other seismic conditions that could Y[ NE] UD-]adversely affect the safety functions of the equipment?
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ NDl UiD potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[] NEI UDl N/AZ Large metal housing structure.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ N[-] UrI N/AD-1 and masonry block walls not likely to collapse onto the equipment?
Adequately supportedpolar crane overhead.
: 9. Do attached lines have adequate flexibility to avoid damage?                 YDI  NEI UD- N/AZ
: 10. Based on the above seismic interaction evaluations, is equipment free         YZ NLiI U--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 179 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ   N-- UMli Seismic Walkdown Checklist (SWC)                   SWC- 43 Equipment ID No.         VA-15B                   Equip. Class3 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   NE] UD-]
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch Kevin Bessell Date: 8/27/12 8/27/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch                                                           Date: 8/27/12 Kevin Bessell                                                            8/27/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 180 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND UL-I Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class4 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Photographs Note: Equipment (large housing).Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 181 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN Ni 1 ULI Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class, 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Location:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 180 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND     UL-I Seismic Walkdown Checklist (SWC)                   SWC- 43 Equipment ID No.         VA-15B                   Equip. Class4 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Photographs Note: Equipment (large housing).                                   Note:
Bldg. AUX Floor El. 1036 Room, Area 72, 8W'JI-12N'7A Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one Y-I NN of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 181 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN Ni 1   ULI Seismic Walkdown Checklist (SWC)                   SWC- 44 Equipment ID No.       VA-46A                   Equip. Class, 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Location: Bldg. AUX               Floor El. 1036           Room, Area 72, 8W'JI-12N'7A Manufacturer, Model, Etc. (optional but recommended)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YN N[D] U[] N/AD--3. Is the anchorage free of corrosion that is more than mild surface YN NDl UD-] N/AD oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the YZ ND: UDl N/AD anchors?'Enter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y-I NN of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 182 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE]1 U--1 Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class2 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YN N[D] U[] N/AD--
YE] No] UEZ N/A[(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             YN NDl UD-] N/AD oxidation?
: 6. Based on the above anchorage evaluations, is the anchorage free of Y[ NE]1 UiI potentially adverse seismic conditions?
: 4. Is the anchorage free of visible cracks in the concrete near the               YZ ND:     UDl N/AD anchors?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
'Enter the equipment class name from Appendix B: Classes of Equipment.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
 
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YEI NE] UE] N/A[YZ NEI UE] N/AE]Y[ NEI UE] N/A[-]YN N[] UE 2 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 182 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE]1 U--1 Seismic Walkdown Checklist (SWC)                   SWC- 44 Equipment ID No.         VA-46A                   Equip. Class2 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 183 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ N1 UL--Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class3 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Other Adverse Conditions
: 5. Is the anchorage configuration consistent with plant documentation?           YE] No] UEZ N/A[
: 11. Have you looked for and found no other seismic conditions that could YN NE] ULi adversely affect the safety functions of the equipment?
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y[   NE]1 UiI potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YEI NE] UE] N/A[
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NEI UE] N/AE]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[  NEI UE] N/A[-]
: 10. Based on the above seismic interaction evaluations, is equipment free         YN N[] UE of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 183 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[   N1 UL--
Seismic Walkdown Checklist (SWC)                   SWC- 44 Equipment ID No.         VA-46A                   Equip. Class3 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN NE] ULi adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8121/2012 Alex Smerch 11 L--8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                               Date: 8121/2012 Alex Smerch 11 L--                                                       8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 184 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN N-] UD Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class4 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Photographs
 
'V"A-w46A CONRO ROO AIRMBDTINWUEI Note: Equipment Tag.Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 184 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN N-] UD Seismic Walkdown Checklist (SWC)                   SWC- 44 Equipment ID No.         VA-46A                   Equip. Class4 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Photographs
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 185 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE ND 1 U[--Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description PANEL BOARD Location:
                          'V"A-w46A CONRO ROO AIRMBDTINWUEI Note: Equipment Tag.                                             Note:
Bldg. AUX Floor El. 1036' Room, Area 77, AI-41A Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 185 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE ND1 U[--
: 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Seismic Walkdown Checklist (SWC)                   SWC- 45 Equipment ID No.       DC-BUS-AI-41A             Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description       PANEL BOARD Location: Bldg. AUX                 Floor El. 1036'         Room, Area 77, AI-41A Manufacturer, Model, Etc. (optional but recommended)
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YE- NO YO ND] UD- N/A[D-YO ND] UD- N/AD-YE] ND] UID N/AZ I Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 186 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YM NR U--i Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description PANEL BOARD 5. Is the anchorage configuration consistent with plant documentation?
Anchorage
YOI Ni UOi- N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 1. Is the anchorage configuration verification required (i.e., is the item one   YE- NO of the 50% of SWEL items requiring such verification)?
: 6. Based on the above anchorage evaluations, is the anchorage free of YM NE] UDJ potentially adverse seismic conditions?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO ND] UD- N/A[D-
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 3. Is the anchorage free of corrosion that is more than mild surface             YO ND] UD- N/AD-oxidation?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 4. Is the anchorage free of visible cracks in the concrete near the             YE] ND] UID N/AZ anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?YZ ND UD N/AD Y[ NDI U- N/AD YM ND UM N/A[D 10. Based on the above seismic interaction evaluations, is equipment free YN ND- UDl of potentially adverse seismic interaction effects?2 Enter the equipment class name from Appendix B: Classes of Equipment.
IEnter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 187 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NR U[--Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description PANEL BOARD Other Adverse Conditions
 
: 11. Have you looked for and found no other seismic conditions that could Y[ NE] UFI--adversely affect the safety functions of the equipment?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 186 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YM NR U--i Seismic Walkdown Checklist (SWC)                   SWC- 45 Equipment ID No.         DC-BUS-AI-41A             Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description         PANEL BOARD
: 5. Is the anchorage configuration consistent with plant documentation?           YOI Ni     UOi- N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YM NE] UDJ potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YZ ND UD N/AD
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     Y[  NDI U-    N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YM ND UM N/A[D
: 10. Based on the above seismic interaction evaluations, is equipment free         YN ND- UDl of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 187 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NR U[--
Seismic Walkdown Checklist (SWC)                   SWC- 45 Equipment ID No.         DC-BUS-AI-41A             Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description         PANEL BOARD Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could         Y[   NE] UFI--
adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Alex Smerch Date: 8/18/2012 8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                               Date: 8/18/2012 Alex Smerch                                                                8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 188 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE Nn UL-]Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class4 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description PANEL BOARD Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 188 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE Nn UL-]
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 189 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN NDl U-]Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Location:
Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A                     Equip. Class4 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description       PANEL BOARD Photographs Note: Equipment.                                                   Note:
Bldg. AUX Floor El. 1011' Room, Area 56, 9W'C-ON'7A Manufacturer, Model, Etc. (optional but recommended)
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
 
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 189 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN NDl U-]
Y[-i NO 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Seismic Walkdown Checklist (SWC)                     SWC- 46 Equipment ID No.         EE-8F                     Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description         125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 9W'C-ON'7A Manufacturer, Model, Etc. (optional but recommended)
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YO ND I U[I N/ADl Y[ N--II UL-- N/AF-D Y[ NE] U[i N/AD&#xfd;I Enter the equipment class name from Appendix B: Classes of Equipment.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 190 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NE] UE]Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL 5. Is the anchorage configuration consistent with plant documentation?
Anchorage
YEI NE] UI- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 1. Is the anchorage configuration verification required (i.e., is the item one   Y[-i    NO of the 50% of SWEL items requiring such verification)?
: 6. Based on the above anchorage evaluations, is the anchorage free of YO NEI U-I potentially adverse seismic conditions?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YO ND I U[I N/ADl
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 3. Is the anchorage free of corrosion that is more than mild surface             Y[      N--II  UL-- N/AF-D oxidation?
: 4. Is the anchorage free of visible cracks in the concrete near the               Y[     NE] U[i     N/AD&#xfd; anchors?
I Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 190 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   NE] UE]
Seismic Walkdown Checklist (SWC)                   SWC- 46 Equipment ID No.         EE-8F                     Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description         125V DC NUMBER 1 MAIN DISTRIBUTION PANEL
: 5. Is the anchorage configuration consistent with plant documentation?           YEI NE] UI- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YO NEI     U-I potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[] NO uE-] N/AE:]
There is only a 3/8" gap between this equipment and other safety related equipment (EE-8C) nearby, raising the possibility of out of phase displacement between these different pieces of equipment, and banging against each other. CR 2012-10427 has been initiated.
There is only a 3/8" gap between this equipment and other safety related equipment (EE-8C) nearby, raising the possibility of out of phase displacement between these different pieces of equipment, and banging against each other. CR 2012-10427 has been initiated.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NEi UE] N/AE]-
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[] NO uE-] N/AE:]YZ NEi UE] N/AE]-Y] NE] UE:] N/AE-]YE] NO UE-]2 Enter the equipment class name from Appendix B: Classes of Equipment.
and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 191 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ Ni D UD--Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Other Adverse Conditions
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y] NE] UE:] N/AE-]
: 11. Have you looked for and found no other seismic conditions that could Y[ NE] Ur-L adversely affect the safety functions of the equipment?
: 10. Based on the above seismic interaction evaluations, is equipment free         YE] NO UE-]
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 191 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[   Ni D UD--
Seismic Walkdown Checklist (SWC)                     SWC- 46 Equipment ID No.         EE-8F                     Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description         125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could         Y[   NE] Ur-L adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch Date: 8/16/2012 John Kao W4-o 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch                                                           Date: 8/16/2012 W4-o John Kao                                                                  8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 192 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ NFI- UI]Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class4 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Photographs Note: Equipment.
 
Note: Gap between pieces of equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 192 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[   NFI- UI]
Seismic Walkdown Checklist (SWC)                   SWC- 46 Equipment ID No.         EE-8F                     Equip. Class4 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description         125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Photographs Note: Equipment.                                                   Note: Gap between pieces of equipment.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 193 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ N-- U--Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description BUS Location:
 
Bldg. AUX Floor El. 1036' Room, Area 77, AI-40A Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 193 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ N-- U--
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Seismic Walkdown Checklist (SWC)                   SWC- 47 Equipment ID No.       I-BUS-A                   Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description       BUS Location: Bldg. AUX                 Floor El. 1036'         Room, Area 77, AI-40A Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
YE-- NEI 2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
Anchorage
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?YZ NDI UD- N/AD1 YN ND UD- N/AD-]YD- ND- uLI N/AZ I Enter the equipment class name from Appendix B: Classes of Equipment.
: 1. Is the anchorage configuration verification required (i.e., is the item one   YE-- NEI of the 50% of SWEL items requiring such verification)?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 194 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ ND U--Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description BUS 5. Is the anchorage configuration consistent with plant documentation?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NDI    UD- N/AD1
YEI NE-] U-I N/A[(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 3. Is the anchorage free of corrosion that is more than mild surface             YN ND UD- N/AD-]
: 6. Based on the above anchorage evaluations, is the anchorage free of YZ No U--potentially adverse seismic conditions?
oxidation?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 4. Is the anchorage free of visible cracks in the concrete near the             YD- ND- uLI N/AZ anchors?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
IEnter the equipment class name from Appendix B: Classes of Equipment.
: 9. Do attached lines have adequate flexibility to avoid damage?YN NEI U0 N/AD-YZ N[-] U-- N/AL]YZ NEI U-- N/A[-]10. Based on the above seismic interaction evaluations, is equipment free Y[O NEI UEi of potentially adverse seismic interaction effects?2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 195 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ Ni D UDJ Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description BUS Other Adverse Conditions
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 194 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[   ND U--
: 11. Have you looked for and found no other seismic conditions that could Y] NE] UI-adversely affect the safety functions of the equipment?
Seismic Walkdown Checklist (SWC)                   SWC- 47 Equipment ID No.         I-BUS-A                   Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description         BUS
: 5. Is the anchorage configuration consistent with plant documentation?           YEI NE-] U-I N/A[
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ No U--
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         YN NEI    U0 N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ N[-] U-- N/AL]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YZ NEI   U-- N/A[-]
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[O NEI   UEi of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 195 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NiD UDJ Seismic Walkdown Checklist (SWC)                     SWC- 47 Equipment ID No.       I-BUS-A                   Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description         BUS Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y] NE]     UI-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao ?Alex Smerch " Date: 8/18/2012 8/18/2012 3 Enter the equipment class name fromn Appendix B: Classes of Equipment.
Evaluated by: John Kao ?                                                             Date: 8/18/2012 Alex Smerch              "                                                8/18/2012 3 Enter the equipment class name fromn Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 196 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NFD U--i Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Classw 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description BUS Photographs Note: Equipment.
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 196 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NFD     U--i Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A                           Equip. Classw   14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description       BUS Photographs Note: Equipment.                                                   Note:
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 197 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN Nn U-Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class, 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Location:
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Bldg. AUX Floor El. 1012' Room, Area 54, 9W'C-15N'7B Manufacturer, Model, Etc. (optional but recommended)
 
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 197 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN Nn U-Seismic Walkdown Checklist (SWC)                   SWC- 48 Equipment ID No.       EE-8A                     Equip. Class, 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Location: Bldg. AUX             Floor El. 1012'         Room, Area 54, 9W'C-15N'7B Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YN NDI of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Anchorage
YZ NE] U-I N/AD--3. Is the anchorage free of corrosion that is more than mild surface YZ ND] UD:] N/AD-]oxidation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YN NDI of the 50% of SWEL items requiring such verification)?
: 4. Is the anchorage free of visible cracks in the concrete near the YZ ND] UDJ N/ADl anchors?'Enter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?               YZ NE] U-I N/AD--
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 198 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE ND-- UD--Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class2 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 5. Is the anchorage configuration consistent with plant documentation?
: 3. Is the anchorage free of corrosion that is more than mild surface               YZ ND] UD:] N/AD-]
YEI NN UiI N/A[-](Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
oxidation?
There is no anchorage documentation.
: 4. Is the anchorage free of visible cracks in the concrete near the               YZ ND] UDJ N/ADl anchors?
Anchorage pattern attached in photos below. Licensing Basis Evaluation is required.6. Based on the above anchorage evaluations, is the anchorage free of YD NZ UI--potentially adverse seismic conditions?
'Enter the equipment class name from Appendix B: Classes of Equipment.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
 
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 198 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE ND-- UD--
: 9. Do attached lines have adequate flexibility to avoid damage?No attached lines.Y[ N[D] UD-- N/AD-YZ NDI UEl N/AD YDI NEI UD- N/As 10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[9 N[D] UD--2 Enter the equipment class name from Appendix B: Classes of Equipment.
Seismic Walkdown Checklist (SWC)                   SWC- 48 Equipment ID No.         EE-8A                     Equip. Class2 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 199 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM ND-- U-Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class3 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Other Adverse Conditions
: 5. Is the anchorage configuration consistent with plant documentation?           YEI NN UiI N/A[-]
: 11. Have you looked for and found no other seismic conditions that could Y[ NEil UI-adversely affect the safety functions of the equipment?
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
There is no anchoragedocumentation. Anchorage pattern attachedin photos below. Licensing Basis Evaluation is required.
: 6. Based on the above anchorage evaluations, is the anchorage free of           YD NZ UI--
potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[  N[D] UD-- N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YZ NDI    UEl N/AD and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YDI NEI UD- N/As No attachedlines.
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[9 N[D] UD--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 199 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM ND--     U-Seismic Walkdown Checklist (SWC)                   SWC- 48 Equipment ID No.         EE-8A                     Equip. Class3 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could         Y[   NEil UI-adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao Date: 8/15/12 Alex Smerch 84.8/15/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                               Date: 8/15/12 84
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 200 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM Nil U-il Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class4 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Photographs 35 34 6446 64 35 34 No photo was able to be taken for 4 44 45 45 component.
                                                        "*'-".            .8/15/12 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.
34 34 IShower (Ref.)Above Is a plan sketch of the 16 anchor bolts foi the Batneiy Racks.All DIhensIons alse In Inches.All anchoi dianieleis ame 35-Note: Field measured anchor dimensions for battery rack (require LB verification).
 
Note: 4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 200 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM Nil   U-il Seismic Walkdown Checklist (SWC)                   SWC- 48 Equipment ID No.                 EE-8A             Equip. Class4 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Photographs 35                     34 6446                   64 35                       34 No photo was able to be taken for 4       44             45       45                                             component.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 201 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YN ND- U--Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class' 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 Location:
34                           34 IShower (Ref.)
Bldg. AUX Floor El. 1011' Room, Area 56, 9W'C-13N'6D Manufacturer, Model, Etc. (optional but recommended)
Above Is a plan sketch of the 16 anchor bolts foi the Batneiy Racks.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
All DIhensIons alse In Inches.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one of the 50% of SWEL items requiring such verification)?
All anchoi dianieleis ame 35-Note: Field measured anchor dimensions for                         Note:
YN NE]2. Is the anchorage free of bent, broken, missing or loose hardware?3. Is the anchorage free of corrosion that is more than mild surface oxidation?
battery rack (requireLB verification).
: 4. Is the anchorage free of visible cracks in the concrete near the anchors?Some surface pitting of the concrete, not near embedded plates.YZ NDI UiE N/A[D YZ N: U-IE] N/A-]YE NEI Ui] N/AD Enter the equipment class name from Appendix B: Classes of Equipment.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 202 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y[ Nil UEi-Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class2 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 5. Is the anchorage configuration consistent with plant documentation?
 
Y-I NO U0I- N/AFiI (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 201 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YN ND-     U--
Needs plant documentation.
Seismic Walkdown Checklist (SWC)                     SWC- 49 Equipment ID No.         EE-8C                     Equip. Class' 16, BATTERY CHARGERS AND INVERTERS Equipment Description         125V DC BATTERY CHARGER NUMBER 1 Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 9W'C-13N'6D Manufacturer, Model, Etc. (optional but recommended)
See sketch in photo's section. Licensing Basis Evaluation is required.6. Based on the above anchorage evaluations, is the anchorage free of YI- N[ UI-potentially adverse seismic conditions?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Anchorage
There exists a between a 0"and 3/8" gap between EE-8C and EE-8F.These are two independently anchored pieces of equipment which during out of phase seismic motion could come into contact. CR 2012-10427 has been initiated.
: 1. Is the anchorage configuration verification required (i.e., is the item one   YN NE]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
of the 50% of SWEL items requiring such verification)?
There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NDI UiE N/A[D
CR 2012-10423 has been initiated.
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ N: U-IE] N/A-]
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[I NO ULI N/AD-]YDI NZ U[-- N/AD-Y-I ND ULI N/AZ Y[-- NO UD--2 Enter the equipment class name from Appendix B: Classes of Equipment.
oxidation?
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 203 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[ NR UR Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class3 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 Other Adverse Conditions
: 4. Is the anchorage free of visible cracks in the concrete near the               YE NEI Ui] N/AD anchors?
: 11. Have you looked for and found no other seismic conditions that could YN NEi U-I adversely affect the safety functions of the equipment?
Some surface pitting of the concrete, not near embedded plates.
Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 202 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y[   Nil UEi-Seismic Walkdown Checklist (SWC)                   SWC- 49 Equipment ID No.         EE-8C                     Equip. Class2 16, BATTERY CHARGERS AND INVERTERS Equipment Description         125V DC BATTERY CHARGER NUMBER 1
: 5. Is the anchorage configuration consistent with plant documentation?           Y-I NO U0I-     N/AFiI (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Needs plant documentation. See sketch in photo's section. Licensing Basis Evaluation is required.
: 6. Based on the above anchorage evaluations, is the anchorage free of           YI- N[     UI-potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[I NO ULI N/AD-]
There exists a between a 0"and 3/8" gap between EE-8C and EE-8F.
These are two independently anchoredpieces of equipment which during out of phase seismic motion could come into contact. CR 2012-10427 has been initiated.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YDI  NZ U[-- N/AD-and masonry block walls not likely to collapse onto the equipment?
There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y-I ND ULI N/AZ
: 10. Based on the above seismic interaction evaluations, is equipment free         Y[-- NO UD--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 203 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[   NR UR Seismic Walkdown Checklist (SWC)                   SWC- 49 Equipment ID No.         EE-8C                     Equip. Class3 16, BATTERY CHARGERS AND INVERTERS Equipment Description         125V DC BATTERY CHARGER NUMBER 1 Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       YN NEi     U-I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch " D"___________________Date:
D
8/16/12 John Kan V-"O 8/16/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
                                          "___________________Date:                       8/16/12 Evaluated by: Alex Smerch            "
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 204 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YE N[-i UI-Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class4 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 Photographs rl&#xfd;. I I 71, Note: Sketch of Anchorage Note: 3/8" Gap Between EE-8C and EE-8F.4 Enter the equipment class name from Appendix B: Classes of Equipment.
V-"O John Kan                                                                8/16/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 205 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YM N[-- U-I Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class5 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 5 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 206 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ Nn U F1 Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class, 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" Location:
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 204 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YE N[-i   UI-Seismic Walkdown Checklist (SWC)                     SWC- 49 Equipment ID No.         EE-8C                     Equip. Class4 16, BATTERY CHARGERS AND INVERTERS Equipment Description         125V DC BATTERY CHARGER NUMBER 1 Photographs rl&#xfd;.I I
Bldg. AUX Floor El. 1011' Room, Area 56, 7W'C-6N'6D Manufacturer, Model, Etc. (optional but recommended)
71, Note: Sketch of Anchorage                                         Note: 3/8" Gap Between EE-8C and EE-8F.
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YZ NEI of the 50% of SWEL items requiring such verification)?
 
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 205 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YM N[--   U-I Seismic Walkdown Checklist (SWC)                     SWC- 49 Equipment ID No.         EE-8C                     Equip. Class5 16, BATTERY CHARGERS AND INVERTERS Equipment Description         125V DC BATTERY CHARGER NUMBER 1 5 Enter the equipment class name from Appendix B: Classes of Equipment.
YN ND:] UD- N/AD-3. Is the anchorage free of corrosion that is more than mild surface YZ NDl UD-I N/AD--oxidation?
 
: 4. Is the anchorage free of visible cracks in the concrete near the YZ ND] UD] N/ADl anchors?'Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 206 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ Nn U F1 Seismic Walkdown Checklist (SWC)                   SWC- 50 Equipment ID No.       EE-8H                     Equip. Class, 16, BATTERY CHARGERS AND INVERTERS Equipment Description         INSTRUMENT BUS "A" INVERTER "A" Location: Bldg. AUX                 Floor El. 1011'         Room, Area 56, 7W'C-6N'6D Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 207 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y[ Nn U n Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class2 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" 5. Is the anchorage configuration consistent with plant documentation?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
Y-I NE U-I N/A--(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage
Anchorage attachment drawings to Plant floor could not be found. A licensing basis evaluation is required.6. Based on the above anchorage evaluations, is the anchorage free of Y-I No U-I potentially adverse seismic conditions?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YZ NEI of the 50% of SWEL items requiring such verification)?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 2. Is the anchorage free of bent, broken, missing or loose hardware?               YN ND:] UD- N/AD-
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 3. Is the anchorage free of corrosion that is more than mild surface               YZ NDl UD-I N/AD--
Fluorescent light bulbs overhead that are not caged which could cause a potentially adverse seismic condition with nearby equipment.
oxidation?
CR 2012-10423 has been initiated.
: 4. Is the anchorage free of visible cracks in the concrete near the               YZ ND] UD] N/ADl anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[ NDI UM N/AD]YDI NZ UD-] N/AD[Y[ ND:- Ur- N/AD-YDI NZ UD--2 Enter the equipment class name from Appendix B: Classes of Equipment.
'Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 208 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[K ND-1 U []Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class3 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" Other Adverse Conditions
 
: 11. Have you looked for and found no other seismic conditions that could Y[ NDl U--I adversely affect the safety functions of the equipment?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 207 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y[   Nn U n Seismic Walkdown Checklist (SWC)                   SWC- 50 Equipment ID No.         EE-8H                     Equip. Class2 16, BATTERY CHARGERS AND INVERTERS Equipment Description         INSTRUMENT BUS "A"INVERTER "A"
: 5. Is the anchorage configuration consistent with plant documentation?           Y-I NE U-I N/A--
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Anchorage attachment drawings to Plant floor could not be found. A licensing basis evaluation is required.
: 6. Based on the above anchorage evaluations, is the anchorage free of           Y-I No U-I potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[  NDI  UM N/AD]
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YDI  NZ UD-] N/AD[
and masonry block walls not likely to collapse onto the equipment?
Fluorescentlight bulbs overhead that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[  ND:- Ur-  N/AD-
: 10. Based on the above seismic interaction evaluations, is equipment free         YDI NZ UD--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 208 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[K ND-1 U []
Seismic Walkdown Checklist (SWC)                   SWC- 50 Equipment ID No.         EE-8H                     Equip. Class3 16, BATTERY CHARGERS AND INVERTERS Equipment Description         INSTRUMENT BUS "A" INVERTER "A" Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   NDl U--I adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch_ _ _ __-_ _ Date: 8/16/2012 John Kao 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch                _     _     _      __-_           _     Date: 8/16/2012 John Kao                                                                   8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 209 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: Y[ Nil1 U IF Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class4 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" Photographs Note: Equipment Tag Note: F-lu overhead.4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 210 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: Y[ ND I U[--I Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class5 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" Mounting base (typ.) I Note: Anchorage configuration sketch.Note: s Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 209 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: Y[   Nil1 U IF Seismic Walkdown Checklist (SWC)                   SWC- 50 Equipment ID No.         EE-8H                     Equip. Class4 16, BATTERY CHARGERS AND INVERTERS Equipment Description         INSTRUMENT BUS "A" INVERTER "A" Photographs Note: Equipment Tag                                               Note: F-lu overhead.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 211 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN ND-1 UF-]Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class, 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR  
4 Enter the equipment class name from Appendix B: Classes of Equipment.
#2 Location:
 
Bldg. AUX Floor El. 1010' Room, Area 64, 3E'F-7S'2B Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 210 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: Y[   ND I U[--I Seismic Walkdown Checklist (SWC)                   SWC- 50 Equipment ID No.         EE-8H                     Equip. Class5 16, BATTERY CHARGERS AND INVERTERS Equipment Description         INSTRUMENT BUS "A"INVERTER "A" Mounting base (typ.)       I Note: Anchorage configuration sketch.                             Note:
GM Electromotive 20-645-E4 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
s Enter the equipment class name from Appendix B: Classes of Equipment.
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YN NE]of the 50% of SWEL items requiring such verification)?
 
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 211 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN ND-1 UF-]
YZ N[I U[I N/ALR 3. Is the anchorage free of corrosion that is more than mild surface YZ NEI ULI N/AF-D oxidation?
Seismic Walkdown Checklist (SWC)                   SWC- 51 Equipment ID No.       DG-2                     Equip. Class, 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2 Location: Bldg. AUX                 Floor El. 1010'         Room, Area   64, 3E'F-7S'2B Manufacturer, Model, Etc. (optional but recommended)             GM Electromotive 20-645-E4 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 4. Is the anchorage free of visible cracks in the concrete near the YZ NEJ UEl N/AD--anchors?IEnter the equipment class name from Appendix B: Classes of Equipment.
Anchorage
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 212 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE NE-- Ur]Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class2 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR  
: 1. Is the anchorage configuration verification required (i.e., is the item one     YN NE]
#2 5. Is the anchorage configuration consistent with plant documentation?
of the 50% of SWEL items requiring such verification)?
Y[ N[il U-I N/AL](Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
: 2. Is the anchorage free of bent, broken, missing or loose hardware?               YZ N[I   U[I N/ALR
The anchorage is consistent with drawing 11405-S-52, Rev. 6 (File#16437).6. Based on the above anchorage evaluations, is the anchorage free of YZ Ni-- U-il potentially adverse seismic conditions?
: 3. Is the anchorage free of corrosion that is more than mild surface               YZ NEI   ULI N/AF-D oxidation?
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
: 4. Is the anchorage free of visible cracks in the concrete near the               YZ NEJ UEl N/AD--
Not a soft target Y[E] NR] U[E] N/A[A 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
anchors?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?Y[ NE] UM] N/A[L]Y[ NE] U[-] N/AL]Y[K N[-] UE--2 Enter the equipment class name from Appendix B: Classes of Equipment.
IEnter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 213 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE ND I U[-Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class3 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR  
 
#2 Other Adverse Conditions
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 212 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE NE-- Ur]
: 11. Have you looked for and found no other seismic conditions that could Y[-] No UI--adversely affect the safety functions of the equipment?
Seismic Walkdown Checklist (SWC)                   SWC- 51 Equipment ID No.         DG-2                     Equip. Class2 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2
Insulation of piping on top of generator may have not been included in original seismic analysis.
: 5. Is the anchorage configuration consistent with plant documentation?         Y[   N[il U-I N/AL]
CR 2012-10369 has been initiated.
(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
The anchorageis consistent with drawing 11405-S-52, Rev. 6 (File#
16437).
: 6. Based on the above anchorage evaluations, is the anchorage free of           YZ   Ni-- U-il potentially adverse seismic conditions?
Interaction Effects
: 7. Are soft targets free from impact by nearby equipment or structures?         Y[E] NR] U[E] N/A[A Not a soft target
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,   Y[  NE] UM] N/A[L]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 Y[  NE] U[-] N/AL]
: 10. Based on the above seismic interaction evaluations, is equipment free       Y[K N[-] UE--
of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 213 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE ND I   U[-
Seismic Walkdown Checklist (SWC)                   SWC- 51 Equipment ID No.         DG-2                     Equip. Class3 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2 Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[-] No UI--
adversely affect the safety functions of the equipment?
Insulation of piping on top of generatormay have not been included in originalseismic analysis. CR 2012-10369 has been initiated.
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: Alex Smerch._ _ _ _ _ _ Date: 8/15/2012 John Kao 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: Alex Smerch                     ._       _     _       _ _ _       Date: 8/15/2012 John Kao                                                                 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 214 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NiI ULi Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class4 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR  
 
#2 Photographs Note: Equipment Note: Insulated line on top of generator.
EA12-021, Rev. I ATTACHMENT 11.2 PAGE 214 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NiI     ULi Seismic Walkdown Checklist (SWC)                   SWC- 51 Equipment ID No.         DG-2                     Equip. Class4 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2 Photographs Note: Equipment                                                   Note: Insulated line on top of generator.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
4 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 215 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YN NF] U--Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class, 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Location:
 
Bldg. AUX Floor El. 993' Room, Area 19, IW'C-4S'4A Manufacturer, Model, Etc. (optional but recommended)
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 215 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YN NF] U--
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings.
Seismic Walkdown Checklist (SWC)                     SWC- 52 Equipment ID No.         FT-1368                   Equip. Class, 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Location: Bldg. AUX                 Floor El. 993'           Room, Area 19, IW'C-4S'4A Manufacturer, Model, Etc. (optional but recommended)
Additional space is provided at the end of this checklist for documenting other comments.Anchorage 1. Is the anchorage configuration verification required (i.e., is the item one YZ NEI of the 50% of SWEL items requiring such verification)?
Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?
Anchorage
YZ NEil U[-I N/A[ID 3. Is the anchorage free of corrosion that is more than mild surface YZ Nil U0I N/AI-I oxidation?
: 1. Is the anchorage configuration verification required (i.e., is the item one   YZ NEI of the 50% of SWEL items requiring such verification)?
: 4. Is the anchorage free of visible cracks in the concrete near the YN N[:] U[I N/AD--anchors?I Enter the equipment class name from Appendix B: Classes of Equipment.
: 2. Is the anchorage free of bent, broken, missing or loose hardware?             YZ NEil U[-I N/A[ID
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 216 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ NFil U-1 Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class2 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER
: 3. Is the anchorage free of corrosion that is more than mild surface             YZ Nil U0I N/AI-I oxidation?
: 5. Is the anchorage configuration consistent with plant documentation?
: 4. Is the anchorage free of visible cracks in the concrete near the               YN N[:] U[I N/AD--
Y-I NZ U-- N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
anchors?
Drawing 3143K10-058, Sh. 1, Rev. 10 (File# 9906) is used for anchorage configuration verification.
I Enter the equipment class name from Appendix B: Classes of Equipment.
Item anchorage may not be consistent with Plant documentation since anchor angle plate is rotated flipped (see photo below and reference drawing).
 
Note on drawing states to see drawing 11405-M-54, Sh. 20 for field configuration.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 216 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ NFil U-1 Seismic Walkdown Checklist (SWC)                   SWC- 52 Equipment ID No.         FT-1368                   Equip. Class2 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMPFW-6 SUCTION FLOW TRANSMITTER
More information is needed and a Licensing Basis Evaluation is required.6. Based on the above anchorage evaluations, is the anchorage free of YD] NZ U0-potentially adverse seismic conditions?
: 5. Is the anchorage configuration consistent with plant documentation?           Y-I NZ U--     N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
Interaction Effects 7. Are soft targets free from impact by nearby equipment or structures?
Drawing 3143K10-058, Sh. 1, Rev. 10 (File# 9906) is used for anchorage configuration verification. Item anchoragemay not be consistent with Plant documentation since anchorangle plate is rotated flipped (see photo below and reference drawing). Note on drawing states to see drawing 11405-M-54, Sh. 20 for field configuration. More information is needed and a Licensing Basis Evaluation is required.
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?
: 6. Based on the above anchorage evaluations, is the anchorage free of           YD] NZ U0-potentially adverse seismic conditions?
: 9. Do attached lines have adequate flexibility to avoid damage?10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?YZ ND:] uD:- N/ADl YN NDi uD- N/AD-]YN ND] UD-- N/AD--YO Nr- UFD 2 Enter the equipment class name from Appendix B: Classes of Equipment.
Interaction Effects
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 217 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[ ND! U-I Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class3 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Other Adverse Conditions
: 7. Are soft targets free from impact by nearby equipment or structures?         YZ ND:] uD:- N/ADl
: 11. Have you looked for and found no other seismic conditions that could Y[ NE Ui-J adversely affect the safety functions of the equipment?
: 8. Are overhead equipment, distribution systems, ceiling tiles and lighting,     YN NDi    uD- N/AD-]
and masonry block walls not likely to collapse onto the equipment?
: 9. Do attached lines have adequate flexibility to avoid damage?                 YN ND] UD-- N/AD--
: 10. Based on the above seismic interaction evaluations, is equipment free         YO Nr-    UFD of potentially adverse seismic interaction effects?
2 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 217 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[   ND!U-I Seismic Walkdown Checklist (SWC)                     SWC- 52 Equipment ID No.         FT-1368                   Equip. Class3 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Other Adverse Conditions
: 11. Have you looked for and found no other seismic conditions that could       Y[   NE Ui-J adversely affect the safety functions of the equipment?
Comments (Additional pages may be added as necessary)
Comments (Additional pages may be added as necessary)
Evaluated by: John Kao V-"~Date: 8/13/12 A8 Alex Smerch ['- / ------- 8113112 3 Enter the equipment class name from Appendix B: Classes of Equipment.
V-"~
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 218 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: Y[ NO UD-Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class4 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Photographs Note: Side view of equipment showing its mounting bracket flipped from configuration drawing.Note: Equipment close to combustibles.(Acceptable for maintenance area under SO-G-91)4 Enter the equipment class name from Appendix B: Classes of Equipment.
Evaluated by: John Kao                                                             Date: 8/13/12 A8 Alex Smerch ['-           /   -------                                   8113112 3 Enter the equipment class name from Appendix B: Classes of Equipment.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 219 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN NR ULI Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class5 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Note: Equipment.
 
Note: Equipment Wall anchorage.
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 218 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: Y[   NO   UD-Seismic Walkdown Checklist (SWC)                   SWC- 52 Equipment ID No.         FT-1368                   Equip. Class4 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMPFW-6 SUCTION FLOW TRANSMITTER Photographs Note: Side view of equipment showing its                           Note: Equipment close to combustibles.
5 Enter the equipment class name from Appendix B: Classes of Equipment.}}
mounting bracket flipped from configuration                        (Acceptable for maintenance area under SO-drawing.                                                          G-91) 4 Enter the equipment class name from Appendix B: Classes of Equipment.
 
EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 219 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN NR ULI Seismic Walkdown Checklist (SWC)                   SWC- 52 Equipment ID No.       FT-1368                   Equip. Class5 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Note: Equipment.                                                 Note: Equipment Wall anchorage.
5Enter the equipment class name from Appendix B: Classes of Equipment.}}

Latest revision as of 04:21, 6 February 2020

Engineering Report EA12-021, Revision 1, Seismic Walkdown Submittal Report for Resolution of Fukushima Near-Term Force Recommendation 2.3: Seismic. Part 1 of 2
ML13193A238
Person / Time
Site: Fort Calhoun Omaha Public Power District icon.png
Issue date: 04/26/2013
From: Bessell K
Enercon Services
To:
Office of Nuclear Reactor Regulation
References
LIC-13-0070 EA12-021, Rev 1
Download: ML13193A238 (264)
v • d • e


Text

LIC-13-0070 Attachment Page 1 EA12-021, Revision 1 Updates Pages or Attachments Updated in EAl 2-021, Revision 1 (Provided in Enclosure 1):

Pages 1 though 42 1.1, Page 28 of 30 1.2 1.4 1.5 1.7 Not Provided (No Changes from Revision 0): 1.3 1.6

LIC-1 3-0070 Page 1 EA12-021, Seismic Walkdown Submittal Report, Revision 1

OMAHA PUBLIC POWER DISTRICT FORT CALHOUN NUCLEAR STATION SEISMIC WALKDOWN SUBMITTAL REPORT for Resolution of Fukushima Near-Term Task Force Recommendation 2°3: Seismic Engineering Repodt Type; N',*ew ~Li ', ion EG No. N/A LNo Prepared by: Kevin Bessell (ENERCON) Date: 4:Th12013 (Pnnt NeIS~prt)

Re viei eby: Laura Macl yNERCONt_

0 (Pin r Jim Carison (2

Peer I metSign) gerj(int NameitS Approved by: Jan Bostelmnak. al5

(~k ~'t~ ~1 Other (Print NamefSign)

I

wENGINEERING REPORT NO. EA1 2-021 Fu. hm EE Na ERCO N

  • "**'*"*'*,*':*c*,,7*;;*,*,REVISION 2.3 S 1IAE2 F4 OF Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown TABLE OF CONTENTS Section Paqe LIST OF TABLES 3 1.0 SCOPE AND OBJECTIVE 4 2.0 SEISMIC LICENSING BASIS

SUMMARY

7 2.1 SAFE SHUTDOWN EARTHQUAKE 7 2.2 DESIGN CODES, STANDARDS, AND METHODS 10 3.0 SEISMIC WALK-DOWN PROGRAM IMPLEMENTATION APPROACH 12 4.0 PERSONNEL QUALIFICATIONS 14 4.1 SEISMIC WALK-DOWN TEAM 15 4.2 PEER REVIEW TEAM 20 5.0 IPEEE VULNERABILITIES REPORTING 21 6.0 SEISMIC WALK-DOWN EQUIPMENT LIST DEVELOPMENT 24 6.1 SAMPLE OF REQUIRED ITEMS FOR THE FIVE SAFETY FUNCTIONS 25 6.2 SPENT FUEL POOL (SFP) ITEMS 27 7.0 SEISMIC WALK-DOWNS AND AREA WALK-BYS 30 8.0 LICENSING BASIS EVALUATION 32 8.1 LICENSING BASIS EVALUATIONS 32 8.2 CORRECTIVE ACTON PROGRAM ENTRIES 33 8.3 PLANT CHANGES 34 9.0 PEER REVIEW 35 9.1 PEER REVIEW PROCESS 35 9.2 PEER REVIEW RESULTS

SUMMARY

37

10.0 REFERENCES

39 11.0 ATTACHMENTS 42

400* ENGINEERING REPORT NO. EA12-021 lt!Tn ýtnUENERCON Fukushima N ear-Term;Task ForceRecommendREVISION 2 PAGE 3 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown LIST OF FIGURES Page Figure 1 9 Figure 2 239 1 LIST OF TABLES Page Table 1 - Personnel Function 14 Table 2 - Summary of Peer Reviewed Checklists 38

ENGINEERING REPORT NO. EA12-021 JENERCON Lc:.,- E aldo*./* REVISION I PAGE 4 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 1.0 SCOPE AND OBJECTIVE This report documents the results of the seismic walkdown effort at the Omaha Public Power District (OPPD) Fort Calhoun Nuclear Station, for resolution of the Fukushima Near Term Task Force (NTTF) Recommendation 2.3: Seismic.

The objective of the walkdown effort is to provide response to the Title 10 of the Code of Federal Regulations, Section 50.54(f) letter (10 CFR 50.54(f)) issued by the Nuclear Regulatory Commission (NRC) on March 12, 2012 (Reference [10.1]). US nuclear power plants are "required to perform seismic walkdowns to identify and address degraded, non-conforming or unanalyzed conditions and to verify the current plant configuration with respect to the current seismic licensing basis". The Nuclear Energy Institute (NEI), through the Electric Power Research Institute (EPRI), prepared industry guidance to assist licensees in responding to this NRC request. During the walkdowns, a sample of components and areas of the plant are examined to identify potentially adverse seismic conditions, within the guidelines and parameters provided in the EPRI report 1025286 "Seismic Walkdown Guidance for Resolution of Fukushima Near-Term Task Force Recommendation 2.3: Seismic", dated June 2012 (Reference [10.2]) and endorsed by the NRC on May 31, 2012. This report will be referred to as the "EPRI Guidance"for the remainder of this document. Omaha Public Power District (OPPD)

Fort Calhoun Nuclear Station (FCNS) has committed to using this NRC endorsed guidance as the basis for the walkdowns and this report.

The sample of components selected for walkdown inspection must be suitably diverse, be located in a variety of environments, include items needed to safely shutdown the reactor, maintain containment integrity, and avoid unanticipated rapid drain-down of the spent fuel pool. The walkdowns primarily focus on equipment anchorage, seismic spatial interaction, seismically induced fire and seismically induced flood.

16I00-EN CENGINEERING REPORT NO. EA12-021 f-, .'ev-f-,qPC*.erl*

Ef** daiREVISION 1 PAGE 5 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Section 6.0 describes the equipment and component selection process. The selected sample of components constitutes the Seismic Walkdown Equipment List (SWEL). In addition to seismic equipment/component walkdowns (SWD), "area walk-bys" were performed to ensure that there were no other potentially adverse seismic conditions in an approximate 35 foot radius surrounding each component on the SWEL. The seismic walkdown teams consisted of two seismic walkdown engineers (SWE). In cases where multiple SWEL items were located in the same room/area of the plant, a single area walk-by was conducted for those items.

The results of the seismic walkdowns and walk-bys are documented on the Seismic Walkdown Checklists (SWC) and Area Walk-by Checklists (AWC). Any potentially adverse seismic conditions discovered during the walkdowns and identified on the SWC's or AWC's, that could not readily be shown to meet the Current Licensing Basis (CLB), were entered into the plant's Corrective Action Program (CAP) for documentation, evaluation and resolution. Description of the walkdown process is provided in more detail in Section 7.0; results are provided in Attachments 11.2, 11.3, 11.4.

Licensing Basis Evaluations (LBEs) were performed as part of the resolution of the Condition Reports (CR) that were initiated to document potentially adverse seismic conditions. The LBE process is described in more detail in Section 8.0; results of the evaluations are summarized in Attachment 11.4.

A Peer Review team was formed to review all aspects of the effort, including the development of the SWEL, the consideration of vulnerabilities identified in the 1990's under the Individual Plant Examination of External Events (IPEEE) program, the performance of SWEs during walkdowns and area walk-bys, the Licensing Basis Evaluation process, and this Submittal Report. The Peer Review process is described in more detail in Section 9.0; results are included in Attachments 11.6 and 11.7.

,-.NRC

. ~~~ N ENGINEERING REPORT NO. EA1 2-021

... .. ... ,c**c**,*'*;*.4,*REVISION I PAGE 6 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown In accordance with the EPRI Guidance, the following topics are addressed in the subsequent sections of this report:

  • Seismic Licensing Basis Summary
  • Personnel Qualifications
  • Selection of Systems, Structures and Components (SSCs)
  • Seismic Walkdowns and Area Walk-bys

" Licensing Basis Evaluations

  • IPEEE Vulnerabilities Resolution Report
  • Peer Review

.1 iENGINEERING REPORT NO. EA12-021 NI ENERCON

.. ' .. . REVISION 1 PAGE 7 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 2.0 SEISMIC LICENSING BASIS

SUMMARY

2.1 SAFE SHUTDOWN EARTHQUAKE The Fort Calhoun Station is a pressurized water reactor (PWR) located on the west bank of the Missouri river, .approximately 19.4 miles north of Omaha, Nebraska. The plant site is underlain by 65 to 75 feet of unconsolidated alluvial and glacial deposits, largely loose to moderately compact silty sand, and denser sands and gravels resting on sedimentary rock. The plant buildings are supported by a system of pipe piles driven to bedrock. The soil around the piles under Seismic Category I structures was compacted by vibroflotation to prevent liquefaction under Maximum Hypothetical Earthquake (Safe Shutdown Earthquake) loading.

The foundation mat for the Containment and Auxiliary buildings is an integral unit supported on piles. The Intake Structure and Turbine Building are on separate foundations, each supported on piles. The plant grade elevation is 1004 feet.

The primary sources of the plant's seismic licensing basis information are the Updated Safety Analysis Report (USAR), Appendix F (Reference [10.3]), and the Plant Level Design Basis Document (PLDBD), PLDBD-CS-51 (Reference [10.4]). The USAR describes the Design Earthquake (DE), also referred to as Operating Basis Earthquake (OBE), and the Maximum Hypothetical Earthquake (MHE), also referred to as Safe Shutdown Earthquake (SSE) and Design Basis Earthquake (DBE).

FCNS was licensed in accordance with the draft criteria set forth in the 70 General Design Criteria for Nuclear Power Plant Construction, published for comment in the Federal Register (32 FR 10213) on July 11,1967.

The Safe Shutdown Earthquake (SSE) for the site is 0.17g acting in the horizontal direction and two-thirds of 0.17g acting in the vertical direction simultaneously, in combination with the primary steady state stresses. Total stresses are limited so that

_405,0RCONENGINEERING REPORT NO. EA12-021 U ENERCON 01-A**.'**e-;*):*.E./ REVISION I PAGE 8 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown the function of Class 1 SSC's is not impaired in a manner that would prevent a safe and orderly shutdown of the plant.

The ground response spectrum of the SSE (MHE) is shown in Figure 1. The spectrum conforms to the average spectra developed by Housner (Reference [10.11]) for frequencies higher than about 0.33 Hz. The spectra for frequencies lower than about 0.33 Hz were prepared utilizing data presented by Newmark (Reference [10.12]).

The damping factors (percent of critical) that were used in the design of SSC's range from 0.5% for vital piping systems to 7% for framed concrete structures. Damping ratio for bolted steel assemblies and for concrete structures supporting the reactor vessel or steam generator was 2%.

S ENERCO N ,ENGINEERINGREPORT NO. EA12-021 m N r Ts FREVISION 1 PAGE 9 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown

_ Z~FYK ,rU

~ it.7r

<7'~~ ,7 "ra ~ 1 4- -1

-~jvj

-31A 361WO M N? W

,QA TI, FPO UM= STrO=-UU NO1 36759 RESPONSE SPECTRA MAXIMUM HYPOTHETICAL EARTHQUAKE FIG F-2 Figure 1

ENGINEERING REPORT NO. EAI2-021 N'ENERCON

  • =*** *, *,.::*-*;*j*;:.'0*:j01REVISION 1 PAGE 10 OF 42 01 W-fft D I I I Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 2.2 DESIGN CODES, STANDARDS, AND METHODS All Class I systems, structures and components (SSC's) at FCS have been designed to withstand stresses resulting from the response to the Design Earthquake (ground acceleration of 0.08g horizontal and two-thirds of 0.08g vertical, acting simultaneously),

in combination with the primary steady-state stresses. Total stresses are maintained within the allowable working stress limits accepted as good practice and, where applicable, set forth in the appropriate design standards, such as the ASME Boiler and Pressure Vessel Code, USAS B31.1 (1967), USAS B31.1 (1955) for Reactor Coolant loop piping, and B31.7 (1968) Codes for Pressure Piping, ACI 318-63 Building Code Requirements for Reinforced Concrete, and AISC Specification for the Design and Erection of Structural Steel for Buildings. In addition, Class I SSC's have been designed such that seismic stresses resulting from the response to the Maximum Hypothetical Earthquake (ground acceleration of 0.17g horizontal and two-thirds of 0.17g vertical, acting simultaneously), in combination with the primary steady-state stresses, are limited so that the function of the SSC's is not impaired in a manner that would disrupt the safe and orderly shutdown of the plant. Seismic qualification of Class I electrical equipment conforms to IEEE 344-1975. Components of the Reactor Protective System and the Engineered Safeguards Actuation System are qualified per IEEE 344-1971 "Guide for Seismic Qualification of Class 1E Electrical Equipment for Nuclear Power Generation Stations".

The general Method of analysis for Class 1 SSC's can be described as follows:

" Determine the natural frequency of vibration of the structure or component

  • Select the appropriate Amplified Floor Response Spectrum (ARS, currently called In-Structure-Response-Spectrum, or ISRS) or Ground Spectrum, depending on support elevation and/or location

,E NERC0N REPORT NO.

,ENGINEERING EA12-021

  • . *, *,*'.,*:*,,jp:;.**.r*a/REVISION 1 PAGE 11 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown
  • Select the appropriate damping ratio of component and, from the corresponding spectral curve and at the natural frequency of vibration of the component, read the response acceleration of the component
  • Stresses resulting from the combination of Design Earthquake acceleration and other applicable loads are checked against limits imposed by design standards
  • Responses resulting from the combination of Maximum Hypothetical Earthquake acceleration and other applicable loads are checked to ensure that stresses would not produce rupture and deflections would not prevent the functional performance of the component

ENGINEERING REPORT No. EA12-021

,, r REVISION I PAGE 12 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 3.0 Seismic Walk-down Program Implementation Approach OPPD has committed to conduct and document seismic walkdowns for resolution of NTTF Recommendation 2.3: Seismic, in accordance with the EPRI Guidance. OPPD contracted with ENERCON Services, Inc., for supplementary engineering and management resources.

A team of individuals, Mr. Marvin Morris and Mr. Steve Skubey, equipped with knowledge of plant systems and components, were selected to develop the Seismic Walkdown Equipment List (SWEL). Two SWELs were developed: SWEL 1 and SWEL 2.

SWEL 1 consists of a sample of equipment related to safe shutdown of the reactor and maintaining containment integrity; SWEL 2 consists of items related to the Spent Fuel Pool, as described in the EPRI Guidance.

Personnel responsible for performing the walkdowns and AWCs successfully completed training for the NTTF Recommendation 2.3: Seismic. The Seismic Walkdown Engineers who are certified by SQUG were not required to complete the NTTF training, but were trained on the differences between the USI A-46 and NTTF 2.3: Seismic programs. The team of Seismic Walkdown Engineers (SWEs) who performed the walkdowns were Mr.

Kevin Bessell, Mr. Alex Smerch, and Mr. John Kao. The majority of the walkdowns were performed by Mr. Smerch and Mr. Kao. Mr. Bessell took over the role left vacant by Mr. Kao to complete the remaining walkdowns with Mr. Smerch. Plant personnel, namely Russ Placke, Ashwin Patel and Jim Carlson, also assisted in performing walkdowns. All SWEs have some if not extensive experience in seismic design and qualification of nuclear power plant SSC's. It was considered important to the project to ensure that any given walkdown team would be comprised with an experienced seismic engineer and one less experienced engineer. Qualifications of the seismic walkdown team members are provided in Section 4.0.

OENGINEERING REPORT No. EA 2-021

.... .. .. I -, Ew doi REVISION I PAGE 13 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Seismic Walkdown Checklists (SWC's) and Area Walk-by Checklists (AWC's) were prepared in advance of the walkdowns. Packages were assembled into folders that included related information, such as location of equipment, anchorage drawings, in-structure response spectra information, calculations, and previously performed qualifications under earlier programs (refer to Section 5.0), if available.

Walkdowns were performed for all accessible components on the combined SWEL (SWEL 1 + SWEL 2). During the walkdowns, SWC's were completed for each component on the SWEL, and AWC's were completed for each area within an approximate 35 foot radius of the component. Walkdowns were tracked by component number and AWC's by location. Details of the SWC's and AWC's are provided in Section 7.0.

The SWCs and AWCs were given one of three status marks "Y" for Yes (walkdown is completed), "N" for No (walkdown has not been performed), or "U" for Uncertain (walkdown has been performed however more information is required and item has been deferred). When feasible, inaccessible items were replaced by alternate, accessible items, and the SWEL was revised accordingly. Such changes were reviewed by the SWEs, Equipment Selection Personnel and the Peer Review team.

Potentially adverse seismic conditions that were identified in the walkdowns were either evaluated under a Licensing Basis Evaluation or entered directly into the plant's corrective action program (CAP) for further evaluation. A summary of the potentially adverse seismic conditions is provided in Attachment 11.4.

A Peer Review was conducted for each activity, including this submittal report. The Peer review activity is described in detail in Section 9.0. Qualifications of the Peer Review team are provided in Section 4.0.

REPORT No. EA12-021 U ENERCON 40ý0"ENGINEERING E o E,*P,*-* REVISION PAGE 14 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 4.0 Personnel Qualifications Qualifications and experiences of personnel participating in the NTTF Seismic Walkdown effort are provided in this section. Training certificates for the SWEs are provided in Attachment 11.8.

Name of Equipment Plant Seismic Licensing IPEEE Peer Personnel Selection Operations Walkdown Basis Reviewer Reviewer Marvin X X Morris Steve X Skubey Kevin X X X (LBE)

Bessell Alex X Smerch John Kao X Don Pier X X (SWEL)

Ashwin X X (SWD, Patel SWEL)

Ryan X Rymarczyk David X X (SWD)

Haas Russell X Placke Laura X X Maclay Jim X X Carlson Table 1 - Personnel Function

__NERrN ENGINEERING REPORT NO. EA12-021 U ENERCON . REVISION I PAGE 15 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 4.1 SEISMIC WALK-DOWN TEAM

" Marvin Morris B.S. Mathematics, University of Texas, Pan American, 1968 M.S. Physics, Sam Houston State University, 1974 Mr. Marvin Morris is the Supervisor of Safety Analysis in ENERCON's NYSIS Division. Mr. Morris has over 30 years of experience in the nuclear industry in areas of design, analysis, licensing and operations support. His more recent experience has been involved with the development of Combined License (COL) applications for Bellefonte, Grand Gulf Nuclear Station, William States Lee and Comanche Peak Nuclear Power Plant new plant projects.

  • John Kao, S.E., P.E.

B.S. Civil Engineering, University of Illinois at Urbana-Champaign,1976 M.S. Civil Engineering, University of Illinois at Urbana-Champaign,1977 MBA Illinois State University, 2003 Mr. John Kao is a Civil/Structural Engineer, sub-contracted by ENERCON, with over 34 years of work experience, the majority of which has been in nuclear.

John has expertise in diverse areas of structural analysis and design, as well as some areas of civil engineering. Over the past 9 years at a utility company, Mr.

Kao has served as a manager for small transmission and substation projects as well as performed the engineering for these projects. John has been the lead structural engineer for a leading consulting firm in the power industry and was responsible for the analysis and design of structural steel structures, pipe supports, writing design criteria and coordinating field work. Mr. Kao is an EPRI trained SQUG Seismic Capability Engineer. He is a licensed structural engineer and professional engineer in the state of Illinois.

ENGINEERING REPORT NO. EA12-021 5.. 4...7

~ 2 ~ENERCON 4 '- REVISION 1 PAGE 16 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown

" Kevin Bessell, S.E., P.E.

B.S. Civil Engineering, University of Illinois at Urbana-Champaign,2000 Mr. Kevin Bessell is the Lead Civil/Structural Engineer in ENERCON's Naperville, Illinois office. He has over 12 years of experience, of which 4 years are in the nuclear industry. Mr. Bessell recently completed the seismic analysis of the Fuel Handling Building at Zion Nuclear Power Station in support of the upgrade of the overhead bridge crane. In addition, he provided oversight for the cask set down safe load path evaluations and stack-up seismic restraint design. Mr. Bessell has experience in linear time history and response spectrum dynamic analyses as well as equivalent static method analysis of decoupled subsystems. Mr. Bessell is an EPRI trained Fukushima NTTF Recommendation 2.3 Seismic Walkdown Engineer and has trained over 30 individuals. He is a licensed structural engineer in the state of Illinois and a licensed professional engineer in the state of Illinois and Wisconsin.

  • Alex Smerch B.S. Civil Engineering, Marquette University, Milwaukee, WI, 2008 Mr. Alex Smerch is a Civil/Structural Engineer in ENERCON's Naperville, Illinois office and is the lead Seismic Walkdown engineer for the project. He has over 3 years of experience performing structural analysis and design in the power and industrial industries. His experience includes developing and analyzing finite element models using a variety of software to aid the design of numerous structural components and systems. He is experienced in preparing design calculations and analysis of concrete and steel structures, conducting dynamic analyses of structures to resist seismic and hydrodynamic loads, designing various structural support systems to comply with regulations and restrictions at nuclear facilities, and performing computer programming to post-process and expedite the analysis results from software based design aids. Mr.

4 0 E ~N ENER CONREOT ENERCNENGINEERING REPORT NO.. EA12-021

!*,*!**i

. .. *:.,c.-*,p**-*/*REVISION I PAGE 17 OF 42 Oift"Pwi I II Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Smerch is an EPRI trained Fukushima NTTF Recommendation 2.3 Seismic Walkdown Engineer and has trained over 15 individuals.

" Steve Skubey B.S. Civil Engineering, University of Tennessee, Knoxville, TN Mr. Steve Skubey is a Civil/Structural Engineer in ENERCON's Overland Park, Kansas office. He has over 4 years of experience in the nuclear industry. He has been involved with the TVA Watts Bar Nuclear Unit 2 completion as an employee with Bechtel Power Corporation. His primary role was a pipe support design engineer performing design analyses, material testing and hazard evaluations.

  • Ryan Rymarczyk B.S., Nuclear Engineering,University of Illinois Urbana-Champaign,2007 Mr. Ryan Rymarczyk is a Nuclear Engineer in ENERCON's Naperville, Illinois office. In this position, he has performed various mechanical analyses and design for commercial nuclear power plants including River Bend, Perry, Point Beach, St. Lucie and Palisades Nuclear Stations. Mr. Rymarczyk was also involved in developing an economic feasibility study for a next-generation mid-western nuclear power station.

" David Haas B.S. Engineering Technology, University of Nebraska, 1977 Mr. David Haas has over 33 years of experience as a former senior mechanical design engineer in the Design Engineering Group at OPPD; 22 years of nuclear experience at Fort Calhoun Station; performed walkdowns for concrete anchor inspection and anchor pull-testing for the NRC I&E Bulletin 79-02 in the late 70's and early 80's; also performed pipe support walkdowns for related I&E Bulletin 79-14; wrote specifications, installation and repair procedures,

.... ....*4050140ENGINEERING EENERCON REPORT E -2 No. EAI 2-021 ikrO' ERCN

,'-6E .. REVISION 1 PAGE 18 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown performed ASME code reconciliations, qualified various welding procedures and served as alternate welding engineer.

" Ashwin Patel B.S. MechanicalEngineering, University of Idaho B.S. ElectricalEngineering, University of Idaho Mr. Patel is a senior engineer at OPPD. He has performed stress analyses and equipment qualifications of various power plant components based on SQUG methodology at General Electric, Union Carbide (Reprocessing Nuclear Fuel) and TVA; performed testing of equipment, seismic test reports, prepared modifications, evaluated relays and quality relays at OPPD. He holds the following certifications: SQUG Walkdown Engineer; SQUG NARE; SQUG Relay Evaluation.

  • Don Pier B.S., Thomas Edison State University Mr. Pier is a licensed Senior Reactor Operator at Fort Calhoun Nuclear Station.

He has been the project manager for the Steam Generator Replacement and Extended Power Uprate. He holds the following qualifications: Shift Manager; Control Room Supervisor; Shift Technical Advisor; Reactor Operator; Test Engineer.

" Russ Placke, P.E.

B.S. Civil Engineering, University of Nebraska, Lincoln, 1995 Mr. Placke has over 17 years of experience as a Civil/Structural Design engineer. Much of this experience has been in the power and industrial field in the design of steel and concrete structures such as buildings, pipe racks, pipe supports, building foundations and equipment foundations. A portion of this experience has been as a field engineer for the construction of (3) combined

ry ENGINEERING REPORT NO. EA12-021

~~DENERCON 'jp*:o.r/4REVISION

  • ' . :,*,* * ,**:*., I PAGE 19 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown cycle power plants where he was responsible for the resolution of structural issues encountered during the construction. The past two years have been as a design engineer - nuclear at OPPD's Fort Calhoun Power Station where he has been extensively involved in the plant recovery efforts such as the reconstitution of the containment internal structure design calculations. Mr.

Placke has also completed OPPD's one year training program for design engineers and also the Seismic Qualification Utility Group (SQUG) training.

Laura Maclay B.S. Structural Engineering,Drexel University Ms. Maclay has over five years of experience as a structural engineer, three years with Enercon Services and is a qualified Seismic Walkdown Engineer as stated on her EPRI training certificate dated July 26, 2012. Her tasks have ranged from assisting with the development and preparation of design change packages to performing design calculations and markups, comment resolutions, and drawing revisions. Ms. Maclay spent a year on site at Turkey Point Nuclear Plant preparing structural evaluations of SSC's for an Extended Power Uprate (EPU). Her work included designing safety related supports for computer and electrical equipment for the Turbine Digital Controls Upgrade package and other similar packages. Ms. Maclay's responsibilities also included the review of calculations, drawings and vendor documentation for the seismic evaluation of the Unit 3 Palfinger Crane inside containment and new platforms in the High Pressure Turbine enclosure.

Recent work includes Fukushima flooding walkdowns at Limerick Generating Station and seismic walkdowns at Plant Farley and Pilgrim Nuclear Generating Station. Ms. Maclay was the lead engineer for the Pilgrim seismic walkdowns, prepared the final report for issue to the NRC and was the reviewer for the final seismic report for Fitzpatrick.

..... N ENERCON I E'JEN E CONENGINEERING REPORT NO.

E -2 EA12-021

  • =,* Lc*.:*-*.t*::*.'*r*/REVISION I PAGE 20 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown James Carlson B.S. Mechanical Engineering, North Dakota State University Mr. Carlson has over thirty years of experience in the HVAC industry. His expertise includes seismic restraint design of non-structural components for commercial and nuclear facilities. James is a certified seismic evaluation engineer (SQUG), identified by the Department of Energy Professional Engineering. He is responsible for the original preparation of the ASHRAE Seismic Restraint Design chapter published in the 1991 Applications Handbook and recent revision and served as the Principle Investigator of the "Manuals for Seismic Installation of Electrical and Mechanical Equipment" project contracted with ASCE (

Reference:

FEMA contract EMW-2001-CO-0379).

4.2 PEER REVIEW TEAM

  • Kevin Bessell (ENERCON)
  • Laura Maclay (ENERCON)

e-0 - ENGINEERING REPORT NO. EA12-021

~~FE ENERCON REVISION I PAGE 21 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 5.0 IPEEE Vulnerabilities Reporting During the IPEEE program in response to NRC Generic Letter 88-20 (Reference [10.5]),

plant-specific seismic vulnerabilities were identified at many plants. In this context, "vulnerabilities" refers to conditions found during the IPEEE program related to seismic anomalies, outliers, or other findings.

IPEEE Reviewers (see Section 4.0) reviewed the IPEEE Report (Reference [10.25])

and supporting documentation to identify items determined to present a seismic vulnerability by the IPEEE program. IPEEE Reviewers then reviewed additional plant documentation to identify the eventual resolutions to those seismic vulnerabilities not resolved by the completion of the IPEEE program.

During the 1980's, the NRC initiated an Unresolved Safety Issue (USI) A-46 under Generic Letter No. 87-02 (Reference [10.6]), to review the seismic adequacy of equipment in certain operating nuclear power plants with respect to seismic criteria not in use at the time when these plants were licensed. FCNS was identified as one of the A-46 plants which must be reviewed. The vulnerabilities that were then identified under the IPEEE program were also incorporated as outliers under the USI A-46 program.

OPPD joined the Seismic Qualification Utility Group (SQUG) which published the Generic Implementation Procedure, Revision 2 (GIP-2) (Reference [10.17]) for evaluating these plants and equipment. The NRC accepted the SQUG procedure for resolving USI A-46 in Supplementary Safety Evaluation Report No.2 (SSER No.2)

(Reference [10.18]). OPPD used GIP-2 in its entirety, including the clarifications, interpretations and exceptions identified in SSER No.2, as clarified by the August 21, 1992 SQUG letter (Reference [2.19]), to evaluate the seismic adequacy of selected safe shutdown equipment in the Fort Calhoun Station (Reference [2.20]).

ENGINEERING REPORT NO. EA12-021

- -,.' I--

EENERCON ,__;*.r/o REVISION 17 PAGE 22 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown The NRC issued a Safety Evaluation Report to OPPD on July 30, 1998, which accepted the results of the USI A-46 program for FCNS, including the approach used to resolve all outliers and vulnerabilities (Reference [2.21]).

As discussed in the letter in the following figure, there are no IPEEE vulnerabilities to report, because all "outliers" have been resolved and incorporated into the plant design (see Figure 2 below for closeout of USI A-46, TAC No. M69447).

jj~IE~

E;F3 ENERCON ir NERCONENGINEERING REPORT No. EAI 2-021

-~ -~ -EVIIION -AGE, I G 23 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown REWT) AUG 41i998 UNI1TED STATUSNkc-9?-I

. 2 NUCLEAR REGULATORY COMMISSION C ~WASHIINGTON, 01C. 2CBSCOW1 July 30. 199$

Mr. 6 K. Gambhir POSMCN =EQUUaED Division Manager - Engineering & Operations Support PER 10 CPR 19.]!, 214 or 50.7 Omaha Pubic Power DLstrict Fr. Calhoun Station FC-2-4 Adm. Y -

__ 'c Post Office Box 399 Hwy. 16 - Norln of Fort Calhoun .REW* Z BY

_W 1

Fc'¶ Calhoun, Nebraska 68023-0399

SUBJECT:

FORT CALHOUN STATION. UNIT NO. I - CLOSEOUT OF UNRESOLVED SAFETY ISSUE A-46 (TAC NO. M69447)

Dear Mr. Gambhir-Tlw slaf[ has reviewed Omaha Public Power District's (OPPD) respoise to Generic Letter (GU'.1 37-r)2 whitl, Pstahlished the USI A-46 program for the Fort Calhoun Station. Unit No. 1. The slatt conCludea tat your US? A-46 implementation program ias met the purpose arc intent of the criteria ina the Generic Implerner.tation Procedlure, Revision 2 -CGIP-2)and the staff's SupplemenlaW Safety Evoaluation Reporl No. 2 (SSER No. 2) for the resolution of USI A-46. Thc -

staff has determined that yoir corrective actions and comnleted physical rrodifications for ,r resolution of outliers ,esulted in safety enhanczrrwnts. In certain aspects, that are beyond the origiial I censing ,1308lF and as a rneult, provide sufficient. :ais to close the US] A-416 review at V tho Facility. The stall concludes that yo.r Implemmntalion programto resoDIVe USI A-46 an the Facility nas odeqgLately addressed the purpose of the 10 CFR 50.64(fi reqUest Your aclIvItles related to the USI A-46 implementation are subject NoNRC irspectlon.

Sincerely, L. Raynard Wharton, Projeot Manager Project Directorate IV-2 Division of Reaclrt Prujects - IIIVIV Office of Nuclear Reactor Regulti ion Docket No. 50-286

Enclosure:

Sa'ety Evaluation c wiencls: See next page WGCates, DJucobberjer. Sk(:anibhi*. RLPhivlps. JIVChase, MATesarr JMSolyniossy, lIL.Jw.ur,.kE. PJLourwbcxrry. R2We.tcutt. IL[tIli%. DRPodc.tI, MJiLucht. JWTIIts. BtHnansher, TCfwvEtthews. flFSpire,. JMKtIhr. DPGalIe, ltDe. ,rtin. JGKoppl*cr. JH..acKLnnori,. Taylur.

.,Ancjus, TJPi-ni-sano, WI-IFujimoto. HFConwy,, FlLF COPY (Joazn Figure 2

ENGINEERING REPORT NO. EA12-021 N'...ENERCON

. **:**:'-*.*Tp*;*,1a*REVISION 1 PAGE 24 OF 42 0*A crttfb"V IIII Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 6.0 Seismic Walk-down Equipment List Development The process used to select the items to be included in the seismic walkdown equipment list (SWEL) is described in detail in the EPRI Guidance, Section 3: Selection of SSCs. In general, the Ft. Calhoun SWEL is comprised of two groups of items, one of which is a sample of components from the USI A-46 safe shutdown equipment list (SSEL), the Ft.

Calhoun IPEEE list, insights from the Ft. Calhoun PRA, and review of plant modifications completed since the USI A-46 report was completed (termed SWEL 1) and the other is a sample of components associated with the spent fuel pool (termed SWEL 2).

The equipment list used as a starting point for development of the SWEL 1 is the base list, or BL 1. The base list used at FCNS is the Safe Shutdown Equipment List (SSEL) that was developed to address the NRC Unresolved Safety Issue (USI) A-46, "Seismic Qualification of Equipment in Operating Plants" which employed the guidance provided in Revision 2 of the Generic Implementation Procedure (GIP) and NRC Supplemental Safety Evaluation Report No. 2. The SSEL was developed in the 1990's and, to ensure that the safe shutdown paths used as a basis for the list remained valid, a review of the Design Basis Documents (DBDs) for safe shutdown systems was performed to identify changes to the systems since the SSEL was developed. Any new or changed equipment was added to BL 1.

The selection of equipment for the seismic walkdown is based on the USI A-46 Safe Shutdown Equipment List from EA 96-017(Reference [2.26]) and the IPEEE Component List from the IPEEE Report (Reference [2.25]). Screening of these lists is based on the requirements provided in the EPRI Guidance. In accordance with the EPRI Guidance, Seismic Category I structures, containment penetrations, and Seismic Category I piping systems were not included in the SSC bucket from which the SWEL 1 components were selected. This selection process is intended to comply with the request in the NRC

..... ENERCON ENGINEERING REPORT NO. EAI 2-021

_ , ,.-ENERCON REVISION 1 PAGE 25 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 50.54(f) Letter (Reference [10.1]), under the "Requested Actions" section, to "verify current plant configuration with the current license basis."

6.1 SAMPLE OF REQUIRED ITEMS FOR THE FIVE SAFETY FUNCTIONS The selection of equipment for the seismic walkdown was based on the five safety functions identified in the EPRI Guidance:

1. Reactor reactivity control
2. Reactor coolant pressure control
3. Reactor coolant inventory control
4. Decay heat removal
5. Containment function The SWEL 1 was developed by applying the following five sample selection attributes, defined in the EPRI Guidance, Section 3, to BL 1. The method of application is summarized below for each attribute:
  • A variety of types of systems Sample items are selected to represent a broad range of frontline and support systems included on the SSEL.
  • Maior new and replacementequipment A review of the system DBDs was performed to identify major new or replacement equipment installed within the last 20 years. A sample of these items is included on SWEL 1.

" A variety of types of equipment At least one item from each of the classes of equipment listed in EPRI Guidance, Appendix B: Classes of Equipment was included in SWEL 1 to

.... ENERCON ENGINEERING REPORT NO. E -2 EA12-021

........ E C.-,a REVISION 1 PAGE 26 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown provide a sample selection of a variety of equipment types. No items are specifically listed in the Ft. Calhoun SSEL for Classes 11, 12, and 13. For these three classes no items are included on SWEL 1.

  • A variety of environments Sample items were selected from different locations in the plant to include various environments (hot, cold, dry, wet) and inside and outside installations.
  • Equipment enhanced due to vulnerabilitiesidentified during the IPEEE program The IPEEE program documentation was reviewed to determine equipment that had been modified or otherwise enhanced to reduce IPEEE vulnerabilities. A sample of these items is included on SWEL 1.

An additional consideration for the development of SWEL 1 is the equipment availability for inspection due to protected train restrictions during plant operation. The SWEL 1 items were selected from a single train (train A, where possible) and the walkdowns were scheduled to be accomplished within a single week to ensure accessibility. To ensure that risk significant items were included, insights from the Ft. Calhoun Probabilistic Risk Assessment (PRA) were considered.

The Fort Calhoun Station Probabilistic Risk Assessment (PRA) model includes only simplified modeling of a potential seismic initiating event. The simplified seismic model is used to support plant configuration risk assessments. It is not equivalent to a seismic PRA, and does not meet Regulatory Guide 1.200 (Reference [2.27]) with respect to modeling of seismic events. The simplified seismic model is based on a hypothetical seismic event (nominally 0.1g) that is assumed to result in failure of selected equipment that is susceptible to failure at or near the assumed g-level. The model assumes that the seismic event results in unrecoverable loss of off-site power, failure of equipment in the Turbine Building (including Auxiliary Feedwater Pump FW-54), failure of the diesel-

~F13 evIo-sNvEoCO ENERCON ENGINEERING REPORT No. EA1 2-021

... .. . ....£*E.=**-f,*;E~r*iREVISION 1 PAGE 27 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown driven fire pump in the Intake Structure and failure of all makeup sources to the Emergency Feedwater Storage Tank (EFWST) except Raw Water.

Using the existing PRA model, a list of potential seismic event accident sequences (i.e.,

cut-sets) was generated. The list of importance measures for basic events appearing in the seismic event cut-sets were sorted based on the "Risk Achievement Worth, RAW" importance measure. The equipment with the highest importance according to this approach is listed below:

" Diesel Generators (including inlet/exhaust dampers and fuel oil transfer pumps)

  • Station Batteries
  • Various 4160V Breakers
  • 480V Buses
  • Auxiliary Feedwater Pumps FW-10 & FW-6 (including associated equipment) 6.2 SPENT FUEL POOL (SFP) ITEMS A base list (BL 2) was developed by reviewing the spent fuel pool (SFP) cooling and inventory related systems for all safety-related, Seismic Category I equipment and reviewing the systems whose failure could result in rapid drain-down of the SFP to within 10' above the stored fuel. Rapid drain-down is defined as lowering of the water level to the top of the spent fuel assemblies within 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> after an earthquake. A sample of the Seismic Category I systems components were selected for inspection consistent with the SWEL 1 methods defined previously to create SWEL 2.

The method for selection of SWEL 2 SFP rapid drain-down items described in the EPRI Guidance is difficult to implement. When rapid drain-down items are identified, it is not clear what actions are required particularly if items are placed on SWEL 2. Rapid drain-

E- N R ONENGINEERING REPORT NO. EA12-021

,-REVISION I PAGE 28 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown down would typically involve piping failure; however, the walkdown guidance does not include piping in the scope. In addition, the rapid drain-down considerations in the EPRI Guidance, such as pool sloshing evaluations, boil-off, leak size, etc., are not sufficiently defined for implementation as part of the walkdown / SWEL development process.

SWEL 1 and SWEL 2 items were combined to form the SWEL. Generally speaking, all major components (e.g., tanks, heat exchangers, and pumps) needed for safe shutdown, following a seismic event and accompanied by a loss of offsite power (LOOP), were selected.

The SWEL was developed in the form of a spreadsheet, which allowed for manipulation/sorting of data and cross-referencing to build summary tables. The SWEL spreadsheet includes the following information:

1. Sequential item number (used to develop the SWC ID #)
2. A-46 Equipment Box (where provided)
3. Component ID
4. Equipment Class (from GIP)
5. Item Description
6. System Designator
7. Location (Room)
8. Floor Elevation
9. Equipment Location
10. Power source (if applicable)

The associated lists from the spreadsheet, BL 1, BL 2, and the combined SWEL can be found in Attachment 11.1. It shall be noted that the information (equipment description, elevation, location, etc.) provided in the base lists (BL1, BL2) is what is provided exactly

F1 EENGINEERING REPORT NO. EA12-021 ENERCON

, ,.REVISION 1 PAGE 29 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown on the SSEL. The information provided in the SWEL is based on current information provided in the document management system utilized by Fort Calhoun Nuclear Station, Asset Suite. As such, the information from one list to the other may vary slightly, and has no effect on the implementation of the walkdowns performed at FCNS.

, ENGINEERING REPORT NO. EA12-021

    • ,* ~

F3 ENERCON

~  ;: Em'-i***.*.,r* REVISION I PAGE 30 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 7.0 Seismic Walk-downs and Area Walk-Bys Subsequent to the development of the SWEL, the SWE's prepared walkdown packages which consisted of the SWCs, AWCs, plant documentation showing the anchorage for at least 50% of the items on the SWEL and in-structure response-spectra, if available.

Having obtained assurance from the SWEL development team and the Peer Review team that the SWEL attributes contained in the EPRI Guidance were not compromised, a small number of components that were inaccessible were either removed from the SWEL or replaced by alternate components.

The initial set of walkdowns were conducted from August 13 th through August 2 9 th, 2012, and focused on anchorages, seismic spatial interactions, and other potentially adverse seismic conditions, such as bolts in degraded or non-conforming conditions, extensive corrosion, absence of, or, inadequate hardware, cracked concrete, corrosion of weld and/or base metal, etc. Remaining walkdowns of deferred items which are discussed in Revision 0 were concluded on March 2 9 th, 2013.

In addition to the general inspection requirements, at least 50% of SWEL items with anchorage were required to be verified that their anchorage is consistent with plant documentation. A total of 96 items were identified on the SWEL for inspection. Of the 96 items on the SWEL, 68 items had anchorage that was not considered in-line.

Anchorage configuration verification was performed on 39 items, which is greater than 50% of the items with anchorage not considered in-line. There are 96 SWCs provided in Attachment 11.2. It shall be noted that the information provided on the SWCs relative to equipment identification, location, description and floor elevation was input as provided in the FCNS document management system, Asset Suite.

Area Walk-Bys were performed in conjunction with the walkdowns of each item. All areas/rooms containing equipment on the SWEL were included in the AWCs. Since

E.odEJEENRGI 0ENERING RPORTNO. E'2-021

... - .. .E~c:*:-*:*,;*.*E:**!REVISION I PAGE 31 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown certain areas contained more than one SWEL item, the number of total area walk-bys conducted is less than the number of seismic walkdowns. A total of 33 area walk-bys were performed and the associated AWCs are provided in Attachment 11.3. It shall be noted that the floor elevation identified on the AWCs corresponds to the elevation from which the inspections were performed.

In cases where the SWEs identified a potentially adverse seismic condition, the condition was identified on the SWC and/or AWC and a Licensing Basis Evaluation was performed.

"-,ý ,--ENGINEERING REPORT NO. EA12-021 H EN ERCO N

,c:*c4":.s'c~r*/REVISION 1PAGE 32 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 8.0 Licensing Basis Evaluation 8.1 LICENSING BASIS EVALUATIONS Potentially adverse seismic conditions identified as part of the NTTF 2.3 Seismic Walkdown program may be evaluated by comparison to the current licensing basis of the plant as it relates to the seismic adequacy of the equipment in question, as is described in Section 5 of the EPRI Guidance. If the identified condition is consistent with existing seismic documentation associated with that item, then no further action is required. Ifthe identified condition cannot easily be shown to be consistent with existing seismic documentation, or no seismic documentation exists, then the condition is entered into the CAP.

Of the 70 identified potentially adverse seismic conditions, 70 LBEs were performed.

Each LBE performed is documented consistently, and included in Attachment 11.5. The results of these LBEs with respect to the associated potentially adverse seismic conditions are summarized in Attachment 11.4. A total of 21 potentially adverse seismic conditions evaluated using a LBE were dispositioned and require no further action, whereas 49 required CAP entry. It shall be noted that some of the potentially adverse seismic conditions are provided on the same CAP entry. The LBEs that were dispositioned were the result of inadequate anchorage configuration documentation at the time of the inspections. The SWE team documented as-built anchorage information as sketches on the checklists for further verification against plant documents.

The following Licensing Basis Evaluations provided below are worth noting. Refer to specific LBEs provided in Attachment 11.5 for more information on the condition.

ENGINEERING REPORT No. EAI2-021 7j EENERCON* n-,jp ;rt i REVISION I PAGE 33 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown LB-2 Condition: Missing clamp attaching unistrut and pipe for FCV-1 369 (SWC-38). The unistrut holds the instrument line.

Evaluation: CR 2012-10198 was initiated to resolve the condition.

LB-28 Condition: Block wall lateral restraint is not in contact with block wall and is possibly not restraining block wall in current state. A potential seismic interaction concern with nearby pumps AC-5A and AC-5B.

Evaluation: CR 2012-10915 was initiated to resolve the condition.

8.2 CORRECTIVE ACTON PROGRAM ENTRIES Conditions identified during the seismic walkdowns and area walk-bys that required further resolution were entered into the plant's Corrective Action Program (CAP) for further review and disposition in accordance with the plant's existing processes and procedures. Conditions entered into the CAP included three types of unusual conditions identified:

Seismically insignificant unusual conditions

  • Potentially adverse seismic condition that does not pass a LBE
  • Potentially adverse seismic condition that bypasses a LBE A total of 36 CRs were written relative to potentially adverse seismic conditions identified. The CR numbers, current status, and resolution (where applicable and available) are summarized for these potentially adverse seismic conditions in 1.4.

t-* .ENGINEERING REPORT NO. EA12-021 ENENERCON . RVSO

.REVISION 1 PAGE 34 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 8.3 PLANT CHANGES There were no immediately implemented plant changes warranted by the results of the NTTF 2.3 Seismic Walkdown program. Resolutions of the CRs for seismically insignificant unusual conditions and potentially adverse seismic conditions identified will determine if future modifications to the plant are required. While no plant modifications have been identified as a result of the seismic walkdowns and walk-bys, various cases were found where repairs were required or housekeeping issues needed to be addressed. Current status and resolutions (where applicable and available) for CRs related to potentially adverse seismic conditions are provided in Attachment 11.4.

" ENERCON NENERCON ENGINEERING REPORT NO. EA12-021

.... .. 1,'.,4,**;,r*

.. REVISION I PAGE 35 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 9.0 Peer Review 9.1 PEER REVIEW PROCESS The Peer Review for the NTTF Recommendation 2.3: Seismic walkdowns was performed in accordance with Section 7 of the EPRI Guidance. The following activities were peer reviewed:

  • sample of the checklists prepared for the seismic walkdowns and area walk-bys
  • licensing basis evaluations
  • decisions for entering the potentially adverse conditions into the CAP process
  • submittal report

" results of the peer review process in the submittal report The selection of items for the SWEL was peer reviewed in accordance with Section 3 of the EPRI Guidance. The peer review team members independently provided comments to the personnel who prepared the SWEL. Peer review comments were resolved and incorporated into the final SWEL, ensuring that all recommendations of the EPRI Guidance have been met. The final SWEL contains a diverse sample of equipment required to perform the five safety functions specified in the EPRI Guidance, which are:

" Reactor reactivity control

" Reactor coolant pressure control

  • Containment integrity

E NENGINEERING REPORT NO. EA12-021

  • ,0rJ;**,*.=n*-E'*'p:*~a*REVISION I PAGE 36 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown In addition, the peer review process verified that SWEL items included major new and replacement items, a variety of environments, equipment enhanced based on findings of the IPEEE (if any), and risk insight considerations.

The peer review team confirmed that the SWE walkdown team performed the seismic walkdowns and area walk-bys as described in Section 4 of the EPRI Guidance. A minimum of 10-25% of the SWCs and AWCs were reviewed for consistency and accuracy. The majority of the peer reviews occurred at the start of the walkdowns, and the reviewers were able to provide comments at the early stages of the process. This helped to ensure consistency and confirm that walkdowns were being performed in accordance with all the requirements of the EPRI Guidance.

All potentially adverse seismic conditions were entered into the plant's CAP program for further review and disposition. The review team verified the decisions for identifying such conditions as sound, and the dispositions were conducted in accordance with the plant's current license basis (CLB).

A peer review was completed of the licensing basis evaluations provided in Attachment 11.5. Within these licensing basis evaluations, CRs were generated for maintenance issues to replace missing bolts, nuts or remove items for housekeeping issues, or to provide further, detailed resolution of the potentially adverse seismic condition. The remaining licensing basis evaluations were created to document potentially adverse seismic conditions that were immediately entered into the CAP for detailed evaluation and investigation. The peer review of these LBEs ensured that all the information provided from the walkdown team to the licensing basis evaluation team member provided enough detail for accurate and timely resolution.

The peer review team was provided with an early draft of this submittal report for peer review. The peer review team verified that the submittal report met the objectives and requirements of Enclosure 3 to the 50.54(f) Letter, and documented the NTTF 2.3

....  :.ENERCON

ENGINEERING REPORT E -2 No. EAI 2-021

, ,:.NERCON . REVISION I PAGE 37 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Seismic Walkdown program performed in accordance with the EPRI Guidance. The peer review team provided the results of review activities to the SWE team for consideration. The SWE team satisfactorily addressed all peer review comments in the final version of the submittal report. The signature of the Peer Review Team Leader provides documentation that all elements of the peer review as described in Section 6 of the EPRI Guidance were completed.

9.2 PEER REVIEW RESULTS

SUMMARY

Peer Review of the seismic walkdowns and area walk-bys were conducted by Ashwin Patel and David Haas, who have extensive experience in seismic engineering as applied to nuclear power plants. The peer review team reviewed the walkdown packages (checklists, photos, drawings etc.) and ensured that the SWCs and AWCs were completed in accordance with the EPRI Guidance. The checklists were selected at random and 25 out of 96 SWC forms (26% of total) and 20 of 33 AWC forms (61% of total) were reviewed.

The table below summarizes the checklists that were reviewed:

Equipment ID SWC No. AWC No.

(from SWEL) 1 FT-1368 52 1 2 YCV-871 H-20 4 2 3 DG-2 51 4 4 FO-2-2 62 4 5 FO-4A-2 21 4 6 EE-8A 48 5 7 EE-4S 15 7

4ENGINEERING REPORT NO. EA12-021 E3 .ENERON REVISION I PAGE 38 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown Equipment ID SWC No. AWC No.

(from SWEL) 8 T1B-3C 16 7 9 FP1 B 76 10 10 AC-12B-M 2 11 11 AI-41A 45 14 12 LT-1183 53 16 13 RW-262 96 16 14 HCV-478 91 18 15 CH-172 73 19 16 AC-1A 59 20 17 HCV-484 27 20 18 AC-102 66 21 19 HCV-2893 35 22 20 AC-4B 60 23 21 HCV-240 36 25 22 SI-6A 89 26 23 HCV-2918 83 29 24 B/PT-913 55 30 25 AC-7 94 33 Table 2 - Summary of Peer Reviewed Checklists

4640WEECENGINEERING REPORT NO. EA1 2-021

  • ,,,, ,* .*:.::**.*'*~a;=**r/aREVISION I PAGE 39 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 10.0 References
1. 10 CFR 50.54(f) Letter "Request for Information Pursuant to Title 10 of the Code of Federal Regulations 50.54(f) Regarding Recommendations 2.1, 2.3 and 9.3 of the Near Term Task Force Review of Insights from the Fukushima Dai-Ichi Accident", dated March 12, 2012
2. EPRI 1025286, Seismic Walkdown Guidance for Resolution of Fukushima Near-Term Task Force Recommendation 2.3: Seismic, June 2012
3. OPPD Fort Calhoun Power Station Updated Safety Analysis Report (USAR).

Revision 4, Issued 04-15-2011

4. OPPD Fort Calhoun Station Plant Level Design Basis Document (PLDBD)
5. Generic Letter No, 88-20, Supplement 4, Individual Plant Examination of External Events (IPEEE) for Severe Accident Vulnerabilities
6. Generic Letter No, 87-02, Verification of Seismic Adequacy of Mechanical and Electrical Equipment in Operating Reactors, Unresolved Safety Issue (USI) A-46
7. Seismic Qualification Utility Group (SQUG) Procedure: Generic Implementation Procedure (GIP) for Seismic Verification of Nuclear Power Plant Equipment, Revision 3A, December 2001
8. NRC-98-129 "Fort Calhoun Station, Unit No.1 - Closeout of Unresolved Safety Issue A-46 (TAC No. M69447)", dated July 30, 1998
9. U.S. Nuclear Regulatory Commission, "Endorsement of Electric Power Research Institute (EPRI) document 1025286, "Seismic Walkdown Guidance",

May 31, 2012....

~7!.**j*,*EENERCON II ENGINEERING REPORT No. EAE2-021

    • t'**

,*.:**-,*p;*,**tREVISION I PAGE 40 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown

10. U.S. Nuclear Regulatory Commission, "Recommendations for Enhancing Reactor Safety in the 2 1 st Century - The Near-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident," July 12, 2011
11. Nuclear Reactors and Earthquakes, TID-7024, Division of Licensing and Regulation, AEC, Washington, D.C., August, 1963
12. Design Criteria for Nuclear Reactors Subjected to Earthquake Hazards, Newmark, N.M., Department of Civil Engineering, University of Illinois (presented in Tokyo, 1968)
13. Report to AEC Regulatory Staff, Adequacy of the Structural Criteria for Fort Calhoun Station - Unit No.1, Omaha Public Power District (Docket No. 50-285),

by N.M. Newmark, W.J. hall and A.J. Hendron, January 12, 1968

14. USNRC Safety Evaluation Report of Alternate Seismic Criteria and Methodologies- Fort Calhoun Station, April 16, 1993, TAC No. M71408 (NRC-93-0150)
15. EA-FC-94-003, Alternate Seismic Criteria and Methodologies, Rev.0
16. USNRC Safety Evaluation Report, Fort Calhoun Station Unit No.1 - Request for Relief from Modifying Pipe Supports SIS-63/65, SIH-3 and RCH-13 (TAC-No. M5547), OPPD Tracking No. NRC-96-188
17. Generic Implementation Procedure (GIP) for Seismic Verification of Nuclear Power Plant Equipment, Revision 2, Corrected 02/14/98, Seismic Qualification Utility Group (SQUG), February 1992
18. NRC letter to SQUG Members dated May 22, 1992, Supplemental No.1 to Generic Letter 87-02 transmitting Supplemental Safety Evaluation Report No.2 (SSER No.2) on SQUG Generic Implementation Procedure, Revision 2, Corrected February 14, 1992 (GIP-2)

ENGINEERING REPORT No. EA12-021

__,__*-E-,pt*E 1 REVISION I PAGE 41 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown

19. SQUG Letter to NRC dated August 21, 1992, SQUG Response to Generic Letter 87-02, Supplement 1 and Supplemental Safety Evaluation Report No.2 on the SQUG GIP
20. EA-FC-93-085, NRC USI A-46 and Seismic IPEEE Resolution
21. NRC Letter to OPPD dated July 30, 1998, Fort Calhoun Station Unit No.1 -

Closeout of Unresolved Safety Issue A-46 (TAC No. M69447), OPPD Tracking No. NRC-98-129

22. Generic Implementation Procedure for Seismic Verification of Nuclear Power Plant Equipment, Revision 3, Updated 05/16/97 (GIP-3), Seismic Qualification Utility Group (SQUG), May 1997
23. NRC letter for SQUG dated December 4, 1997, Supplemental Safety Evaluation Report No.3 (SSER No. 3) on the Review of Revision 3 to the Generic Implementation Procedure for Seismic Verification of Nuclear Power Plant Equipment, Updated May 16, 1997 (GIP-3)
24. Fort Calhoun Station Calculation FC06945 (AREVA NP Inc., Document 32-5028554-01, FCS RSG - RCS Structural Evaluation) FCS RSG - RCS Structural Analysis
25. SL-4910, Individual Plant Examinations for External Events Seismic Margin Assessment Final Technical Report, March 1994, Revision 0
26. EA 96-017, SQUG Program Document Update, Revision 1
27. USNRC Regulatory Guide 1.200, An Approach for Determining the Technical Adequacy of Probabilistic Risk Assessment Results for Risk-Informed Activities, Revision 2

I-'tJ ENRCON ENGINEERING REPORT NO. EA12-021

... =** **;*-*;

... .. ;*REVISION I PAGE 42 OF 42 Fukushima Near-Term Task Force Recommendation 2.3 Seismic Walkdown 11.0 Attachments ATTACHMENT 11.1 - SEISMIC WALKDOWN EQUIPMENT LISTS ATTACHMENT 11.2 - SEISMIC WALKDOWN CHECKLISTS ATTACHMENT 11.3 - AREA WALK-BY CHECKLISTS ATTACHMENT 11.4 - POTENTIALLY ADVERSE SEISMIC CONDITIONS ATTACHMENT 11.5 - LICENSING BASIS EVALUATION FORMS ATTACHMENT 11.6 - PEER REVIEW CHECKLISTS FOR SWEL ATTACHMENT 11.7 - SEISMIC WALKDOWN ENGINEER TRAINING CERTIFICATES

EA12-021, Rev. 1 ATTACHMENT 11.1 PAGE 28 OF 30 SEISMIC WALKDOWN EQUIPMENT LIST (SWEL)

ASSEL SWEL Item BOX Associated Safe CLASS DESCRIPTION SYSTEM ROOM ELEV LOCATION Safety Functions SFP Item Comments Number Shutdown List 1 AC-12B AC-12B 0 RAW WATER STRAINER AC-RW INTK 0994 13W'BB-16N'104 4 2 AC-12B AC-12B-M 0 RAW WATER STRAINER AC-12B MOTOR AC-RW INTK 0999 13W'BB-16N'104 4 3 YCV-871H YCV-871H 0 DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER VA MISL 1024 1OW'K-11S'IA 1,2, 3, 4,5 4 YCV-871H YCV-871H-20 0 DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID VA MISL 1020 1W'K-11S'1A 1, 2, 3,4, 5 5 MCC-3B1 MCC-3B1-C2R 1 VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER EE-5 57 1013 MCC-3B1 5 6 113A 1B3A 2 480 VOLT BUS 1B3A (EE-4F) EE-4B 56 1011 10W'C-21N'5B 1,2,3,4,5 SFP 7 1B3B 1B3B 2 480 VOLT BUS 1B3B (EE-4H) EE-4B 56 1011 1OWC'-9N'5B 1,2,3,4,5 SFP 8 1B3C 1B3C 2 480 VOLT BUS 1B3C (EE-4K) EE-48 56 1011 1OW'C-10N'4A 1,2 9 1B4A 1B4A 2 480 VOLT BUS 1B4A (EE-4G) EE-4B 56 1011 10E'D-15S'SD 1.2,3,4,5 SFP 10 1B4B 1B4B 2 480 VOLT BUS 1949 (EE-4J) EE-4B 56 1011 1OE'D-12N'5B 1,2,3,5 11 1B4C 1B4C 2 480 VOLT BUS 1B4C (EE-4L) EE-4B 56 1011 15W'C-4N'4A 1,2,3,4,5 SFP 12 1A4 1A4-11 3 EREAKER UNIT FEEDER FOR RAW WATER PUMP AC-1OB EE-4A 56 1011 1A4 4 SFP 13 1A3 1A3 3 4.16KV BUS (EE-4C) EE-4A 56 1016 11W'C-18N'1A 1,2,3,4,5 SFP 14 1A4 1A4 3 4.16KV BUS (EE-4D) EE-4A 56 1016 16W'C-18N'lA 1,2.3.4,5 SFP 15 EE-4S EE-4S 4 INVERTER #1, EE-8P BYPASS TRANSFORMER EE 56 1011 OW'C-11N'6D none 16 T1B-3C T1B-3C 4 4160/480 TRANSFORMER BUS 113C EE 56 1011 7W'C-17N'4A 1,2 17 AC-3C AC-3C 5 COMPONENT COOLING WATER PUMP AC-CCW 69 1027 1W'N-3N'BA 3,4 SFP 18 AC-3B AC-3B 5 COMPONENT COOLING WATER PUMP AC-CCW 69 1027 W'N-4'S8A 3,4 SFP 19 CH-1A CH-1A 5 CHARGING PUMP CH 6 0991 5E'U-4N'6E 1,2,3 20 DG-2 FO-17-2 5 DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP FO-DG 64 1010 20WF-22N'1A 1,2,3,4,5 21 DG-2 FO-4A-2 5 D2 FUEL OIL TRANSFER PUMP #1 FO-DG 64 1012 3W'K-6S'2B 1,2.3,4,35 22 FW-10 FW-10 5 AUXILIARY FEEDWATER PUMP (TURBINE-DRIVEN) FW-AFW 19 0991 3W'C-1N'3A 4 23 FW-6 FW-6 5 AUXILIARY FEEDWATER PUMP (MOTOR-DRIVEN) FW-AFW 19 0992 4W'C-5S'4A 4 24 AC-10B AC-108 6 RAW WATER PUMP AC-RW INTK 0994 1E'CC-1N'103 3.4 SFP 25 AC-10D AC-10D 6 RAW WATER PUMP AC-RW INTK 0994 1E'CC-IN'104 3,4 SFP 26 HCV-474 HCV-474 7 SI-IA&B,2AB&CISI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE AC-CCW 6 0992 9WrT-2N'6E none SEP 27 HCV-484 HCV-484 7 SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE AC-CCW 4 0993 2E'E-22N'5B 4 28 HCV-489B HCV-489B 7 COMP COOLING HT EXCH AC-lA CCW OUTLET VALVE AC-CCW 4 0992 1OW'D-1N'6D 4,5 29 HCV-497 HCV-497 7 COMP CLG HT EXCHS AC-IA-D CCW BYPASS LINE ISOLATION VALVE AC-CCW 4 0991 2E'E-S'7A 4.5 30 TCV-893 TCV-893 7 AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE AC-CCW 72 1037 8WJ1-12N'7A none 31 HCV-2874A HCV-2874A 7 RAW WATER PUMPS DISCH HEADER ISOLATION VALVE AC-RW INTK 1001 6E'CC-4S'103 4,5 SFP 32 HCV-2875A HCV-2875A 7 RAW WATER PUMPS DISCH HEADER ISOLATION VALVE AC-RW INTK 1001 6E'CC-7N'103 4,5 SFP 33 HCV-2877A HCV-2877A 7 COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE AC-RW 18 0993 13E'D-12S'6D 4,5 SFP 34 HCV-2880A HCV-2880A 7 COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE AC-RW 18 0994 13E'D-6S'6D 4,5 SFP 35 HCV-2893 HCV-2893 7 RAW WATER TO CCW ISOLATION VALVE AC-RW 18 0993 13E'D-19S'6D 4,5 SFP 36 HCV-240 HCV-240 7 PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE CH CONT 1045 14W'DD-6N'Il 5 37 LCV-218-3 LCV-218-3 7 CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ &BORIC ACID SUPPLY VLV CH 7 0992 45W'T-2N'7B 1,2.3

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 1 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NI I UD--

Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class, 0. Other Equipment Description Raw Water Strainer Location: Bldg. Intake Floor El. 994' Room, Area Intake Structure, 13W'BB-16N'104 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO NDl of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YDl NO U-- N/AD-Strainerbase has four 1.25" diameteranchorbolts to concrete, all of which have a lack of thread engagement to their nuts (varies from 3/8" to 1"). Also, nut seems bent. CR 2012-10553 initiated.
3. Is the anchorage free of corrosion that is more than mild surface YO NDI UD1 N/AD]

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YM NDI UD1 N/AD anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 2 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE] UE]

Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class2 0, Other Equipment Description Raw Water Strainer

5. Is the anchorage configuration consistent with plant documentation? YZ NE] UE] N/All (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorageconfigurationis consistent with drawing 12545, Rev. 8 (File# 12107).

6. Based on the above anchorage evaluations, is the anchorage free of YE] NZ UE]

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[ NE] UE-] N/AE]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NEI uF- N/All]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ NE] Ul-- N/A[-]
10. Based on the above seismic interaction evaluations, is equipment free YN NE] UE of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 3 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NFD U--

Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class3 0, Other Equipment Description Raw Water Strainer Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ N[D ULi adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

V-4-0 Evaluated by: John Kao Date: 8/17/2012 Alex Smerch _ 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 4 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN NE] UD--

Seismic Walkdown Checklist (SWC) SWC- 1 Equipment ID No. AC-12B Equip. Class4 0, Other Equipment Description Raw Water Strainer Photographs Note: Equipment. Note: Lack of anchorthread engagement.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 5 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: Y[ NR UI-Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class, 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Location: Bldg. Intake Floor El. 999' Room, Area Intake Structure, 13W'BB-16N'104 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y-I NZ of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN NE] UEi N/A[:I
3. Is the anchorage free of corrosion that is more than mild surface YN NDl ULi N/ADl oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YD ND U[: N/As anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 6 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE-- UF-Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class2 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR

5. Is the anchorage configuration consistent with plant documentation? YE-- NEI U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ NEi U-I potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y-I NEI- U-] N/AZ Not a soft target YE* NE I U[-- N/Ai I
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, and masonry block walls not likely to collapse onto the equipment?

YE NEI u- N/A[D

9. Do attached lines have adequate flexibility to avoid damage?

Y[ N[-] u--IE

10. Based on the above seismic interaction evaluations, is equipment free of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 7 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE NF-- UL-Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class3 0, Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN No-] Ui--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/17/2012 8.

.. z.* .. :*..=.____8/17/2012 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 8 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YIN NE] U[

Seismic Walkdown Checklist (SWC) SWC- 2 Equipment ID No. AC-12B-M Equip. Class4 0. Other Equipment Description RAW WATER STRAINER AC-12B MOTOR Photographs Note: Equipment Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 9 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NR UD Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class, 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Location: Bldg. MISL Floor El. 1024' Room, Area MISL, 10W'K-11S'1A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y-I NZ of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NEil U-ij N/AD
3. Is the anchorage free of corrosion that is more than mild surface YZ NDI UD N/AD--

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YN ND UD N/ADý anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 10 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND UD--

Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class2 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER

5. Is the anchorage configuration consistent with plant documentation? Y-I NDI U[:] N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ NDI u[:]

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[-- NDl U-' N/AZ Damper is not a soft Target.
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NDI UD: N/A[:]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[-] N[: UD-- N/AZ No attached lines.
10. Based on the above seismic interaction evaluations, is equipment free Y[ N[-] UD--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 11 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NDI UD--

Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class3 0, OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NE] U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/14/12 84 LI- ______- ___--____-__-_-__.------_8/14/12 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 12 OF 403 SEISMIC WALKDOWN CHECKLIST FoRM Sheet 4 of 4 Status: YIN ND U-I Seismic Walkdown Checklist (SWC) SWC- 3 Equipment ID No. YCV-871H Equip. Class4 0. OTHER Equipment Description DIESEL GENERATOR DG-1 ROOM FRESH AIR SUPPLY DAMPER Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 13 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NF- UI-Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class, 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Location: Bldg. MISL Floor El. 1020' Room, Area MISL, 1W'K-11S'1A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YDI NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Y[ NDI UID N/ADl
3. Is the anchorage free of corrosion that is more than mild surface YZ NDI uD- N/AD oxidation?

Mild surface oxidation.

4. Is the anchorage free of visible cracks in the concrete near the YZ NDI UD- N/AD anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 14 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ Ni 1 UD Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class2 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID

5. Is the anchorage configuration consistent with plant documentation? Y-I NEI ULi N/A[

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of Y[ ND] uLI potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y] NDI UD N/AD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NDI UD1 N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YZ ND- U-- N/ADl
10. Based on the above seismic interaction evaluations, is equipment free Y[ NEI UD-of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 15 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y] NFi U-Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class3 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NEI U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao F- Date: 8/14/12 8

- */1'-m- =-- 8/14/12 Alex Smerch I L, 3 Enter the equipment class name fiom Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 16 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Nn U-Seismic Walkdown Checklist (SWC) SWC- 4 Equipment ID No. YCV-871H-20 Equip. Class4 0, OTHER Equipment Description DIESEL GENERATOR DG-1 FRESH AIR INTAKE DAMPER: SOLENOID Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment,

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 17 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ NR URi Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class, 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Location: Bldg. AUX Floor El. 1013' Room, Area 57, MCC-3B1 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YD-- NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO NDi U[-D N/AD-]
3. Is the anchorage free of corrosion that is more than mild surface YN ND] UnL N/AD oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YE] ND] UE] N/AN anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 18 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NiD U-IF Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class2 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER

5. Is the anchorage configuration consistent with plant documentation? YDI NI U-] N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of Y[ NDI U[-D potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YN ND: U[:] N/AD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN ND] U[:] N/AD I and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YN NIL U-I N/AD
10. Based on the above seismic interaction evaluations, is equipment free YN N[DU[-]

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 19 OF 403 SEISMIC WALKIDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NF1 UD1 Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class3 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NrD U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch Date: 8/16/2012 John Kao W- 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 20 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NF-- Ut Seismic Walkdown Checklist (SWC) SWC- 5 Equipment ID No. MCC-3B1-C2R Equip. Class4 1, MOTOR CONTROL CENTERS AND WALL-MOUNTED CONTACTORS Equipment Description VA-64-EHTR CONTROL ROOM FILTER VA-64A INLET HEATER Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 21 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND-- UD-Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)

Location: Bldg. AUX Floor El. 1011' Room, Area 56, 1OW'C-21N'5B Manufacturer, Model, Etc. (optional but recommended) GE Type AKD-5 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO NO UD N/AD
3. Is the anchorage free of corrosion that is more than mild surface YN NI UrII N/AD-oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YO ND UD N/AD anchors?
5. Is the anchorage configuration consistent with plant documentation? YO ND UD N/A[

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 22 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YM N[- U-I Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3A (EE-4F)

6. Based on the above anchorage evaluations, is the anchorage free of YE NDO U potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YN NDI U[-] N/A[-]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NO UrII N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YM ND U[-- N/AD
10. Based on the above seismic interaction evaluations, is equipment free YZ ND U-of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NDI UZ adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

The following items are not a seismic concern but were noted on the walkdowns:

Terminations 13, 14, 15 on 1B3A-101 (not coming in from side) see photo.

(B) Silver oxide outside cable connection missing (not partof contact surface) in 1B3A-103.

(A, B, C) Silver oxide outside cable connection missing (not partcontact surface).

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 23 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[ ND UR-I Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3A (EE-4F)

Evaluated by: .Russ Placke Date: 10/17/2012 Ashwin Patel 10/17/2012

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 24 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YN N-- UD Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)

Re. vn&w U1iIfll (JUPwriul Uri Note: View showing wiring for terminations 13, 14 and 15 not coming in from the side on 1B3A-101,

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 25 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YZ ND- UL-I Seismic Walkdown Checklist (SWC) SWC- 6 Equipment ID No. 1B3A Equip. Class 1 2.LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3A (EE-4F)

Note: wiiver oxiae missing on b Tor pane I Note: wiiver oxiae missing on A, b, u Tor IB3A-103. panel IB3A-104.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 26 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: YZ NFD UFI Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. 1B3B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)

Location: Bldg. AUX Floor El. 1011' Room, Area 56, IOWC'-9N'5B Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[i NM of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN ND-] U- N/Ar-
3. Is the anchorage free of corrosion that is more than mild surface Y[ NDi UD N/AFD oxidation?
4. Is the anchorage free of visible cracks in the concrete near the Y[Z NDi UD- N/A[-]

anchors?

5. Is the anchorage configuration consistent with plant documentation? YI- NDi uID N/A[K (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 27 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND- UD-Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. IB3B Equip. Class 1 2, LOW VOLTAGE SWlTCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3B (EE-4H)

6. Based on the above anchorage evaluations, is the anchorage free of YX N[il UD-potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[ NE-] U[:I N/AD-]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NEl UDI N/A--

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[ ND] UD] N/AD]
10. Based on the above seismic interaction evaluations, is equipment free YZ ND UDl of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NDI uD-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Dangertags noted on cubicle 300B and ground lug remains on frame although wire has been cut and abandonedin place.

Dangertags noted on cubicle 303F.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 28 OF 403 SEISMIC WALKDON CHECKUST FORM Sheet 3 of 5 tu~: YM 1'~J U1 Seimic Waikdovn Checklist (SWC) SWCo 7 Equipmet ID No. ___ Equip Class 2*

ThLYQLT~ SW~j~ B AKER PANELS Equipmet Desr~tio 80V BUS 1P. 4Hjt Evetuted by:

Ai aelz

_______ 11/13/2012

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 29 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ N-] UI-I Seismic Walkdown Checklist (SWC) SWC- 7 Eq'uipment ID No. IB3B Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)

Photographs Nowe: uangertags snown uispiayeu in rrontor cubicle 300.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 30 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN NEI- U--

Seismic Walkdown Checklist (SWC) SWC- 7 Equipment ID No. 1B3B Equip. Class1 2 LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3B (EE-4H)

Note: Exterior view of all cubicles. Note: Back of cubicle 301.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 31 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 6 Status: Y] NEil Ur--

Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)

Location: Bldg. AUX Floor El. 1011' Room, Area 56, 1OW'C-ION'4A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YZ NOi-of the 50% of SWEL items requiring such verification)?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 32 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 6 Status: YN NF] U-i Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class' 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)

2. Is the anchorage free of bent, broken, missing or loose hardware? Y[ NEil Ut-] N/Ai-I Anchorage consists of welds between the bus frame and a metal plate embedded in the concrete floor on both the front and back sides of the bus. Each cubicle has 2 plug welds on the front side and 3 plug welds on the back side with the exception of the 2 center cubicles which have no welds in the back. Upon examination it was observed that for some of the welds there was not complete penetrationor there were gaps between the weld material and the base of the bus. Portions of the base of the cabinent were not completely observable due to a fire resistantcoating obstructing view. Below is a summary of the deficient welds for each cubicle:

Cubicle 500 - 50% of contact with bus in one of the back welds.

Cubicle 502 - 70% of contact with bus in one of the back welds.

Cubicle 503 - 50% of contact with bus in one of the front welds.

Cubicle 503 - Back of cubicle is covered by fire-resistantcoating, but SEWS for IB3C shows that there is no anchorageexisting underneath.

Cubicle 504 - 30% of contact with bus in one of the front welds.

Cubicle 504 - Back of cuble is covered by fire-resistantcoating, but SEWS for 1B3C shows that there is no anchorage existing underneath.

Cubicle 506 - 95% of contact with bus in front left weld.

Cubicle 506 - 50% of contact with bus in front right weld.

Cubicle 506 - Unknown amount of weld in back cubicle as it is covered by fire-resistantcoating.

Review of SEWS package for IB3C noted that the quality of welds were inspected by a weld specialistas cross referenced in the SEWS package of 1A3. Therefore the welds are judged to be acceptable.

The welds that are not visible arejudged to be adequate based on the consistency of welds observed in the remaining cubicles and as noted in the SEWS report.

3. Is the anchorage free of corrosion that is more than mild surface YX Nt] Ut] N/At]

oxidation?

There appears to be mild oxidation on some of the welds but no loss of material.

4. Is the anchorage free of visible cracks in the concrete near the Y[ Nt:] Ut] N/At]

anchors?

There were no cracks observed on the concrete surface.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 33 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 6 Status: YZ Nni- U-Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3C (EE-4K)

5. Is the anchorage configuration consistent with plant documentation? YN NEI- Ur-I N/AL-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Anchorage was verified against SEWS Package for IB3C Rev. 0

6. Based on the above anchorage evaluations, is the anchorage free of YZ N[] UD]

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[K N[] U-I N/AD--

The only nearby equipment is a transformerwhich is connected to the bus and therefore could not move out of phase with the bus and cause damage during an earthquake.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEI UDI N/ADl and masonry block walls not likely to collapse onto the equipment?

All overhead equipment inlcuding lighting and cable trays are well supported.

9. Do attached lines have adequate flexibility to avoid damage? Y[ NF-] UD- N/AD All attached lines either have nearby 90 degree elbows giving them flexibility or are flexible cables themselves.
10. Based on the above seismic interaction evaluations, is equipment free Y[ NiD UFD of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NEI UD adversely affect the safety functions of the equipment?

There were some sheet metal screws observed that were not screwed to anything but a single piece of sheet metal and therefore not providing any function, but these were deemed not to be a seismic concern as they have negligible mass.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 34 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 6 Status: YV N] U[:71 Seismic Walkdown Checklist SWC SWCy 8 Equipment ID No, 13C EquipLC 2ass RAND"FAKER PANEL*

Equipment Description A LT8Bi1B3j& 7 K C. n2m (Additional pages may te added as necesa y)

E~aIuated by: Ao ______________________Dte >2 7/27C'h2 n'aCal, n_ _

/y .... ...... ... *J 2 ... .... .....

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 35 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 6 Status: Y] N-i Ur-i Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB3C (EE-4K)

Note:

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 36 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 6 of 6 Status: YZ NF- Ui-Seismic Walkdown Checklist (SWC) SWC- 8 Equipment ID No. 1B3C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B3C (EE-4K)

Note:

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 37 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: Y[ NOI- UL-]

Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. IB4A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)

Location: Bldg. AUX Floor El. 1011' Room, Area 56, IOE'D-15S'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-1 NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO NEI U-i N/A-]

Only able to visibly identify 2 plug welds in the front of cubicle 205. All remaining anchorpoint plug welds are covered by cabinet plating. The cabinet had been refurbished in 2012 and seismic calculationshave been performed by NLI. A correspondingSQUG walkdown had been performed as stated by Jim Carlson of OPPD, therefore, the remaining cubicles arejudged to be adequate.

3. Is the anchorage free of corrosion that is more than mild surface YZ NEI U-I N/AD--

oxidation?

Refer to question #2. Of the welds that were visible, there was no evidence of corrosion.

4. Is the anchorage free of visible cracks in the concrete near the YOr'NEI UL- N/AD-anchors?

There were no cracks identified in the floors surrounding the equipment.

5. Is the anchorage configuration consistent with plant documentation? YD-] N-- uM N/A[

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

N/A Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 38 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y9 NR-] UL-I Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)

6. Based on the above anchorage evaluations, is the anchorage free of YZ Niln U[I potentially adverse seismic conditions?

Refer to question #2.

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ NDi Ur N/AD:

There are overhead light fixtures in the vicinity with uncaged fluorescent bulbs. The light fixture is well overhead and does not pose a credible interaction with the equipment. The light bulb is not a signficant source since it is brittle with an extremely small mass relative to the cabinet.

The light fixtures also have open S-hooks, however the S-hooks have a wire tieing them closed, therfore providing redundancy.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YX NDI UD N/AD and masonry block walls not likely to collapse onto the equipment?

Cable tray is supportedoverhead. The cable tray supports are well supportedand there is sufficient vertical clearancebetween the top of the cabinet and the bottom of the cable tray support. There is also piping overhead which is well supported and brace.

9. Do attached lines have adequate flexibility to avoid damage? YZ ND] UD-- N/AD-Flexible cables feed into the top of the cabinet Conduit is also connected to the top of the cabinet and contains multiple bends to promote flexibility.
10. Based on the above seismic interaction evaluations, is equipment free YN NDý UDl of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YEK NEI UDý adversely affect the safety functions of the equipment?

Interconnectingbolts were missing which connect panels on IB4A with 69/1IB4A. It appears as if the bolts were there once. There are 3 bolts one side and 4 the other side remaining,and the stabilityand connection is judged to be adequate. CR 2013-07194 was issued to resolve the issue.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 39 OF 403 SEISMIC WAL~DOWN CHECKLiST FORM Sh 3of5 ot~tU12 '~ __ N~J U~

ot m~cW I down Chockliol 2 E3nuQrnent di) N~ ___________ ~(2 Equipfm~nt U sc~ip~on 4~ VC4 Comments (Addt2ora p~; m~T be ade

o s

&~i pro vidh tg interconnnechbn ur*d the e*nec~r tLI4A-~4 *ed some einpty holes tnt &rtercarin angles were pPmvdled w,# manyt tmore OOJtK Cubkcie BTof34A was eel opened sdn*,>e; oasod on obsecvahons of th*e renaining cubi Ea at lb  :~c ye es ______________ 7 it (all ~' 4*. .3 ~e,7Q~$)

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 40 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ NFi- U[-]

Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4A (EE-4G)

Photouraphs Note: Back view of equipment Note: Front view of equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 41 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN N-Il Ui-Seismic Walkdown Checklist (SWC) SWC- 9 Equipment ID No. 1B4A Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4A (EE-4G)

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 42 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: YX N-I U--i Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. 1B4B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)

Location: Bldg. AUX Floor El. 1011' Room, Area 56, 10E'D-12N'5B Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO NEI UD N/AD
3. Is the anchorage free of corrosion that is more than mild surface YEK ND UD N/AD oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YO ND ui- N/A-anchors?
5. Is the anchorage configuration consistent with plant documentation? YD-- ND- UD-- N/A[n (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 43 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND-1 UD Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. IB4B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)

6. Based on the above anchorage evaluations, is the anchorage free of YE ND UD-potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[ ND] U[] N/AD]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YE N[-] U[LI N/A[--

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[ ND] UD] N/AD-
10. Based on the above seismic interaction evaluations, is equipment free Y[ ND: UD]

of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ ND] UD1 adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Dangertags noted in cubicle 404F. This has no adverse impact on the equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 44 OF 403

-s 2.-

A.qhwin Patel 11/13/2012

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 45 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YZ NI D UDl Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. 1B4B Equip. Class1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4B (EE-4J)

Nowe:

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 46 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YZ NDI UD Seismic Walkdown Checklist (SWC) SWC- 10 Equipment ID No. 1B4B Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS 1B4B (EE-4J)

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 47 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ Nr-] UI-Seismic Walkdown Checklist (SWC) SWC- 11 Equipment ID No. 1B4C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)

Location: Bldg. AUX Floor El. 1011' Room, Area 56, 15W'C-4N'4A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[ Ni--

of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YN NE] U[I- N/Al[I Anchorage consists of welds between the bus frame and a metal plate embedded in the concrete floor on both the front and back sides of the bus. Each cubicle has 2 plug welds on the front side and 3 plug welds on the back side with the exception of the end cubicles which have only 1 back weld. Upon examination it was observed that for some of the welds that there was not complete penetrationor there were gaps between the weld materialand the base of the bus. Below is a summary of the deficient welds for each cubicle:

Cubicle 600 - 95% of contact with bus in one of the front welds.

Cubicle 602 - 70% of contact with bus in one of the front welds.

Cubicle 602 - 60% of contact with bus in one of the back welds.

Cubicle 603 - 20% of contact with bus in one of the back welds.

Cubicle 604 - 95% of contact with bus in one of the front welds.

Review of SEWS package for 1B4C noted that the quality of welds were inspected by a weld specialistas cross referenced in the SEWS package of 1A3. Therefore the welds arejudged to be acceptable.

3. Is the anchorage free of corrosion that is more than mild surface YZ NEI U0] N/AE]

oxidation?

There appears to be mild oxidation on some of the welds but no loss of material.

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 48 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND-- UD--

Seismic Walkdown Checklist (SWC) SWC- 11 Equipment ID No. 1B4C Equip. Class 1 2. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)

4. Is the anchorage free of visible cracks in the concrete near the Y[ ND-] UD1 N/AD1 anchors?

There were no cracks observed on the concrete surface.

5. Is the anchorage configuration consistent with plant documentation? Y[ ND-- UD1 N/AD:]

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Anchorage was verified against SEWS Package for 1B4C Rev. 0

6. Based on the above anchorage evaluations, is the anchorage free of Y[ ND:] U[--

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[Z NDI UD- N/ADl All equipment nearby the bus is well secured and poses no risk of seismic interaction.
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NDI UD] N/AD:]

and masonry block walls not likely to collapse onto the equipment?

All overhead equipment inicuding lighting and cable trays are well supported.

9. Do attached lines have adequate flexibility to avoid damage? YZ NDI UD- N/AD:

All attachedlines either have nearby 90 degree elbows giving them flexibility or are flexible cables themselves.

10. Based on the above seismic interaction evaluations, is equipment free YZ NEI UD of potentially adverse seismic interaction effects?

EAI2-021, Rev. 1 ATTACHMENT 11.2 PAGE 49 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 St~tus~L N Jj Seismic Walkdown Checklist ([SWO) SWCo 11 Eq ipmen* iD No 8*4, asc Equip *'..... 2, 2 RANELS Eq ipmei~ Descripton 480 VoCl T US 1842 (FF4!

0ther Adverse Condttfor 11 Hav yu iooked for and foun nri no other sensrmic cond~t*

ad erselv affect tfhe safety funct ocs of tce eqtrDr ntn?

C~mment (AdditIonal pages may be added as necetsar Ait

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 50 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NR UL-Seismic Walkdown Checklist (SWC) SWC- 11 Equipment ID No. 1B4C Equip. Class 1 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 480 VOLT BUS IB4C (EE-4L)

Photographs Note: Equipment

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 51 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YM NR U-I Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class, 2, LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description BREAKER UNIT FEEDER FOR RAW WATER PUMP AC-10B Location: Bldg. AUX Floor El. 1011' Room, Area 56, 1A4 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Y[Z ND UDJ N/AD--
3. Is the anchorage free of corrosion that is more than mild surface YO ND UDl N/AD-oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YO ND U[:] N/AD-anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 52 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE NEI UD Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B

5. Is the anchorage configuration consistent with plant documentation? YE] NE] U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ NI- UE-potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YM NE]I UE N/AE]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YE-] NO UE] N/AE]

and masonry block walls not likely to collapse onto the equipment?

There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.

9. Do attached lines have adequate flexibility to avoid damage? YZ NEI UE] N/AE]
10. Based on the above seismic interaction evaluations, is equipment free YEi NO UE]

of potentially adverse seismic interaction effects?

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 53 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN ND1 U--

Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NEI Ui--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch Date: 8/16/2012

.Anhn Kqn#01 8/16/2012 8/16/2012 John

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 54 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN NF1 ULI Seismic Walkdown Checklist (SWC) SWC- 12 Equipment ID No. 1A4-11 Equip. Class 3 Equipment Description 4.16 KV FEEDER BREAKER TO AC-10B Photographs

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 55 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND-- U--

Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)

Location: Bldg. AUX Floor El. 1016' Room, Area 56, 11W'C-18N'1A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-D NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO NDI UD N/A[D The anchorageconsists of 3 rows of 2 plug welds on either side of each cubicle attaching the base of each cubicle to embedded steel in the floor.

The plug weld on cubicle 1A3-3 middle row is in poor condition and appearsto be missing weld. Review of SEWS documentation for 1A3 confirms that the welds are acceptable based on previous weld inspections.

Due to breaker obstruction,only 5 plug welds were visible for cubicles 1A3-5, 6, 7, 9, 10, 11, 12, 13, 15 and 20.

Plates were obstructing the view of 4 plug welds in cubicles 1A 1- 1A3 and 1A3-4.

Based on informationprovided in the SEWS package the conditions noted above are judged to be adequate. As provided in the SEWS package, the loading conditions are minimal with a lowest safety factor of 4 when analyzed against 5 plug welds. Although only 2 plug welds were visible on 1A 1-13 and 1A 3-4, these welds are judged to be adequate based on the extent and consistency encountered during inspection.

3. Is the anchorage free of corrosion that is more than mild surface YO ND-1 ur N/AD--

oxidation?

Minor oxidation noted in the vicintiy of the plug welds.

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 56 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y; NF] U[-

Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)

4. Is the anchorage free of visible cracks in the concrete near the YZ N[] UD- N/A-anchors?

No cracks are noted in the floor.

5. Is the anchorage configuration consistent with plant documentation? YEI NEI U-- N/AZ (Note: This question only applies ifthe item is one of the 50% for which an anchorage configuration verification is required.)

N/A

6. Based on the above anchorage evaluations, is the anchorage free of Y[ NE] Uil potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YN NEI U[-I N/AD-There are overhead light fixtures in the vicinity with uncaged fluorescent bulbs. The light fixture is well overhead and does not pose a credible interaction with 1A3. The light bulb is not a signficant source since it is brittle with an extremely small mass relative to the cabinet.
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEI U-- N/A--

and masonry block walls not likely to collapse onto the equipment?

Cable tray is supported overhead. The cable tray supports are well supportedand there is sufficient vertical clearance between the top of the cabinet and the bottom of the cable tray support. There is also piping overhead which is well supported and brace.

9. Do attached lines have adequate flexibility to avoid damage? YN N[:] U0 N/AD-1 Flexible cables feed into the top of the cabinet Conduit is also connected to the top of the cabinet and contains multiple bends to promote flexibility.
10. Based on the above seismic interaction evaluations, is equipment free YZ NE] U--

of potentially adverse seismic interaction effects?

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 57 OF 403 Other-Kevin Bessell. . . . . .

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 58 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YN ND 1 UD1 Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C)

R 07 Equipment Note: Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 59 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YE NR Ut]

Seismic Walkdown Checklist (SWC) SWC- 13 Equipment ID No. 1A3 Equip. Class 1 3, MEDIUM VOLTAGE, METAL-CLAD SWITCHGEAR Equipment Description 4.16KV BUS (EE-4C) ote: Plug weld anchorage.

Note: Poor qualityplug weld in 1A3-3. Note: Missing O0lt In non-structuraipiate in cubicle 1A3-4.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 60 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 5 Status: Y[I NE] Ur-j Seismic Walkdown Checklist (SWC) SWC- 14 Equipment ID No. 1A4 Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)

Location: Bldg. AUX Floor El. 1016' Room, Area 56, 16WC-18N'1A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[K NE of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO NE! U[] N/A[]

The anchorageof the bus consists welds between the bus frame and an embedded metal plate in the concrete floor. All 21 cubicles have at minimum six -1/2" welds between the frame and the embed plate, with the exception of cubicles IA4-2 and 1A4-7 having only 4 welded points.

3. Is the anchorage free of corrosion that is more than mild surface YO NO! ur] NIAEJ oxidation?

There appearsto be mild oxidation on some of the welds but no loss of material.

4. Is the anchorage free of visible cracks in the concrete near the YZ NEI U-] N/A'-

anchors?

There were no cracks observed on the concrete surface.

5. Is the anchorage configuration consistent with plant documentation? YZ NE- ur] N/Ar-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Anchorage was verified againstSEWS Package for 1A4 Rev. 0.

Only 2 welds in cubicle 1A4-21 were visible but given that the SEWS Package conservatively excludes some of the welds from its anchorage analysisand still has significantmargin for the seismic analysis, this was not deemed to be a concern.

' EntCT the cquipment class name from Appendix B: Classes of Equipmcnt.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 61 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YN NEI- UI"-J Seismic Walkdown Checklist (SWC) SWC- 14 Equipment ID No. 1A4 Equip. Class1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)

6. Based on the above anchorage evaluations, is the anchorage free of YN N[]U0 potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y ] N[-] U[-] N/A["]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ N[-] U-] N/AL]

and masonry block walls not likely to collapse onto the equipment?

There were overhead lights and cable trays which were well supported.

9. Do attached lines have adequate flexibility to avoid damage? YN N[E] U[- N/Afl All attachedlines were either flexible cable or had 90 degree elbows giving them flexibility.
10. Based on the above seismic interaction evaluations, is equipment free YO NEI UI-of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZI N[] U[-]

adversely affect the safety functions of the equipment?

In the back of cubicle 1A4-21 there were missing bolts holding up an interiorplate inside of the cabinent. But since the interiorplate was not part of or connected to the structuralsystem of the cabinent it was not judged to be a seismic concern.

Comments (Additional pages may be added as necessary)

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 62 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[* NI::] U[-j (SWC) SWC- 14 Seismic Walkdown Checklist Equipment ID No. 1A4 Equip. Class 1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)

Evaluated by: James Carilson ( Date: 12/27/2012 Alex Smerch 12/27/2012

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 63 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YED NM- UE-Seismic Walkdown Checklist (SWC) SWC- 14 Equipment ID No. tA4 Equip. Class1 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D)

I Photouranhs Note:

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 64 OF 403 SEISMIC WALKDOWN CHECKUST FORM Sheet 5 of 5 Status: Y[* Nr"J ULI (SWC) SWC- 14 Seismic Walkdown Checklist Equipment ID No. 1A4 Equip. Class' 3. LOW VOLTAGE SWITCHGEAR AND BREAKER PANELS Equipment Description 4.16KV BUS (EE-4D) te: Back panel showing no anchorage.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 65 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NI I UDl Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class, 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Location: Bldg. AUX Floor El. 1011' Room, Area 56,0W'C-11N'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YM ND of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN ND U-I N/AD--
3. Is the anchorage free of corrosion that is more than mild surface YZ ND UD- N/AD--

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YO NDI UD N/ADl anchors?

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 66 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NR] Ut-Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class2 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER

5. Is the anchorage configuration consistent with plant documentation? Y-] NO Ut] N/At]

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

No documentation identified. Anchor layout shown in sketches below.

Furtherlicense basis evaluation required.

6. Based on the above anchorage evaluations, is the anchorage free of Y[t] NZ Ut]

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y] Nt] Ut] N/At]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YtI NO Ut] N/At]

and masonry block walls not likely to collapse onto the equipment?

There are fluorescent lights located overhead nearby that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.

9. Do attached lines have adequate flexibility to avoid damage? YO Nt] Ut] N/At]
10. Based on the above seismic interaction evaluations, is equipment free Y[--] NO U of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 67 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NR ULI Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class3 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NEil U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/16/2012 8/16/2012 Alex Smerch 1/*'

  • 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 68 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NF1 UI1 Seismic Walkdown Checklist (SWC) SWC- 15 Equipment ID No. EE-4S Equip. Class4 4, TRANSFORMERS Equipment Description INVERTER #1, EE-8P BYPASS TRANSFORMER Photographs Plan W6 6"

30" 1/" anchor bolt (typ.)

l 6"Elev

~Elev.

Note: Equipment is attached to two W6's, Note:

which are anchoredto concrete wall 4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 69 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nt]1 Ut]

Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class, 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 183C Location: Bldg. AUX Floor El. 1011' Room, Area 56, 7W'C-17N'4A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YN Nt-]

of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NtI Ut] N/At-]

The transformeris welded to embed channels.

3. Is the anchorage free of corrosion that is more than mild surface YZ Nt] Ut] N/At]

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YM ND] ULt N/At]

anchors?

' Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 70 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND UD Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class2 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 1B3C

5. Is the anchorage configuration consistent with plant documentation? YZ NDI ULi N/ADl (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorage configuration is consistent with drawing A-5438 (File#

43610).

6. Based on the above anchorage evaluations, is the anchorage free of Y[ ND] UD potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO ND:] uD-] N/AD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YD NZ UD- N/AD-and masonry block walls not likely to collapse onto the equipment?

There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.

9. Do attached lines have adequate flexibility to avoid damage? YDI ND-] UD- N/AO
10. Based on the above seismic interaction evaluations, is equipment free Y-I NO UiD of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 71 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ ND-- UF-1 Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class3 4, TRANSFORMERS Equipment Description 41601480 TRANSFORMER BUS 1B3C Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NEI UrF--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/16/2012 Alex Smerch 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 72 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM N[-- U-II Seismic Walkdown Checklist (SWC) SWC- 16 Equipment ID No. T1B-3C Equip. Class4 4, TRANSFORMERS Equipment Description 4160/480 TRANSFORMER BUS 1B3C Photographs Note: Equipment.

cage.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 73 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ NE] U--

Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class, 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Location: Bldg. AUX Floor El. 1027' Room, Area 69, 1W'N-3N'8A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[ N[D]

of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YN NE] UE] N/AE]
3. Is the anchorage free of corrosion that is more than mild surface YN NDl UD- N/ADl oxidation?
4. Is the anchorage free of visible cracks in the concrete near the Y[ NDJ U-I N/AD--

anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 74 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND I U--

Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class2 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP

5. Is the anchorage configuration consistent with plant documentation? YZ NDi UD- N/ADl (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorageis consistent with drawing 11405-S-53, Rev. 6 (File#

16438).

6. Based on the above anchorage evaluations, is the anchorage free of YZ ND] UDJ potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YED ND] UD- N/A[
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[Z ND] UD] N/AD:

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[O NDI UD: N/ADI
10. Based on the above seismic interaction evaluations, is equipment free Y[ NDi U--1 of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 75 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NFi- U--

Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class3 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NE] U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/21/2012 Alex Smerch 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 76 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ Nn U-Seismic Walkdown Checklist (SWC) SWC- 17 Equipment ID No. AC-3C Equip. Class4 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Photographs Note: Equipment Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 77 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ N[i- U--

Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class, 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Location: Bldg. AUX 1027' Room, Area 69, 1W'N-4'S8A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YM NDl of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN ND_ UID N/AD--

In-line valve.

3. Is the anchorage free of corrosion that is more than mild surface YN ND_1 U[- N/ADJ oxidation?

In-line valve.

4. Is the anchorage free of visible cracks in the concrete near the YZ NO uD1 N/AD-anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 78 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN Nt] Ut]

Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class2 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP

5. Is the anchorage configuration consistent with plant documentation? YZ Nti ULi N/ALi (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

In-line valve.

6. Based on the above anchorage evaluations, is the anchorage free of YN NEI Ut]

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Yt-] NEI Ut] N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YM NEI Ut:] N/At]I and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YN NEI Ut] N/At]
10. Based on the above seismic interaction evaluations, is equipment free YM NFI Ut]

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 79 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NI Uni-Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class3 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NEil U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

V-"o Evaluaed b :Joh a Date: 8/21/2012

... Smerch l*

Alex Alex I * . 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 80 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NR U-II Seismic Walkdown Checklist (SWC) SWC- 18 Equipment ID No. AC-3B Equip. Class4 5, HORIZONTAL PUMPS Equipment Description COMPONENT COOLING WATER PUMP Photographs Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 81 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ ND- UD-1 Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class, 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Location: Bldg. AUX Floor El. 991' Room, Area 6, 5E'U-4N'6E Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[ ND of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN NEI ULI N/AD1
3. Is the anchorage free of corrosion that is more than mild surface YZ NDI UD1 N/AD-oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YN NDI ui N/A--

anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 82 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ ND-- UD--

Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class2 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP

5. Is the anchorage configuration consistent with plant documentation? YZ ND UDl N/ALi (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorageconfiguration is consistent with drawing 11405-S-48, Rev. 7 (File# 16433) and 11405-S-69, Rev. 5 (File# 16454).

6. Based on the above anchorage evaluations, is the anchorage free of Y[ NIl ULi potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ ND U-I N/AF-]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NDI UD-- N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YN NDI UD N/ADl
10. Based on the above seismic interaction evaluations, is equipment free YN NO U-of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 83 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NR U-Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class3 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y] NE] UL-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/20/12 Alex Smerch x'-- 8/20/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 84 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Ni-- U-Seismic Walkdown Checklist (SWC) SWC- 19 Equipment ID No. CH-1A Equip. Class4 5, HORIZONTAL PUMPS Equipment Description CHARGING PUMP Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 85 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YM ND-1 Un Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class, 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Location: Bldg. AUX Floor El. 1010' Rc om, Area 64, 20W'F-22N'1A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-- NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NEI- U-- N/A[-]
3. Is the anchorage free of corrosion that is more than mild surface YZ N--1 ULI-I N/AD-oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YEI NEIl U[- N/A]

anchors?

' Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 86 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND U-Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class2 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP

5. Is the anchorage configuration consistent with plant documentation? YE] NEI U-I N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YN NEIUE potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[ NE] U0 N/AiD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEI UD- N/A--

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ Nr- UD1 N/A[l
10. Based on the above seismic interaction evaluations, is equipment free YZ NEI UDl of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 87 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM NEI U[-1 Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class3 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NE] UI--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch ___._-:_-_-_-_-_-_-_-._-------_ Date: 8/15/2012 John Kaoff ý"~ 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 88 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN Nr- UL]

Seismic Walkdown Checklist (SWC) SWC- 20 Equipment ID No. FO-17-2 Equip. Class4 5, HORIZONTAL PUMPS Equipment Description DIESEL GENERATOR DG-2 DC MOTOR DRIVEN FUEL OIL BOOSTER PUMP Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 89 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YM NL-- URI--

Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class, 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Location: Bldg. AUX Floor El. 1012' Room, Area 64, 3W'K-6S'2B Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YZ NDl of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NDI UDJ N/AD
3. Is the anchorage free of corrosion that is more than mild surface YZ Nn UD-- N/AD oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YO NO UD N/AZ anchors?

' Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 90 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YM ND] UDl Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class2 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1

5. Is the anchorage configuration consistent with plant documentation? YO NDI U0- N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorageconfiguration is consistent with drawing 303. 18-IC-01, Rev. 2 (File# 55108).

6. Based on the above anchorage evaluations, is the anchorage free of Y[ ND] UD]

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO N[D- UD1 N/AD1
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YDI N[I UD N/AD:

and masonry block walls not likely to collapse onto the equipment?

Fan overhead possibly missing tie down clips. Could be out of licensing basis or may not requireall clips to be attached. CR 2012-10367 has been initiated.

9. Do attached lines have adequate flexibility to avoid damage? YO NDI UD- N/AD
10. Based on the above seismic interaction evaluations, is equipment free Yr- NO U--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 91 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[l NF- Ur--

Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class3 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NEI U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/15/12 Alex Smerch 8/15/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 92 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YX NR U-II Seismic Walkdown Checklist (SWC) SWC- 21 Equipment ID No. FO-4A-2 Equip. Class4 5, HORIZONTAL PUMPS Equipment Description D2 FUEL OIL TRANSFER PUMP #1 Photographs Note: Equipment. Note: Fan shield above equipment with holes for additionalbolts.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 93 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NR UI-Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class' 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (TURBINE-DRIVEN)

Location: Bldg. AUX Floor El. 991' Room, Area 19, 3W'C-1N'3A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y] ND of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YE NDI u- N/AD One anchorwas inspected to find that the nut was not flush with the baseplate, upon further inspection of the configuration drawings it was found that this anchorin question was not required, and was most likely just used for leveling for installation.
3. Is the anchorage free of corrosion that is more than mild surface YZ NDl UDl N/AD:-

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YIN NDI UD1 N/ADl anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 94 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ N[-- U[--

Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class2 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (TURBINE-DRIVEN)

5. Is the anchorage configuration consistent with plant documentation? YN ND] U[I N/AlI (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorage configuration is consistent with drawing 11405-S-47, Rev. 14 (File#16432)and 11405-S-69, Rev. 5 (File# 16454).

6. Based on the above anchorage evaluations, is the anchorage free of YN NEIl UD potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[-1 NDI UD- N/AZ Pump not soft target.
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NDJ U[-I N/A[--

and masonry block walls not likely to collapse onto the equipment?

Unistrut nearby appears to be missing clamp but its failure would not damage pump as it is a non significantthreat.

9. Do attached lines have adequate flexibility to avoid damage? YN ND-] UD-- N/AD--
10. Based on the above seismic interaction evaluations, is equipment free YZ NE] U[--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 95 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N-- UD--

Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class3 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (TURBINE-DRIVEN)

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NEI U-il adversely affect the safety functions of the equipment?

Nearby scaffolding anchored at only 1 point would be blocked by pipe supports if seismic motion occured and would not contact pump.

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch _ _ _ _ _ _ Date: 8/13/12 1/-"

John Kao 8/13/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 96 OF 403 ATTACHMENT 9.6 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NE] UI--

Seismic Walkdown Checklist (SWC) SWC- 22 Equipment ID No. FW-1O Equip. Class4 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP(TURBINE-DRIVEN)

Photographs Note: Equipment. Note: Anchorage showing bolts between skid and skid and foundation and pump and skid.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 97 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 3 Status: Y] NiD UD--

Seismic Walkdown Checklist (SWC) SWC- 23 Equipment ID No. FW-6 Equip. Class 1 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP(MOTOR-DRIVEN)

Location: Bldg. AUX Floor El. 992' Room, Area 19, 4W'C-5S'4A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO NDl of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YE NDI UD-- N/A[--

The anchorageof the equipment consists of 6, 1" diametercast in place anchorbolts through an equipment skid.

3. Is the anchorage free of corrosion that is more than mild surface YZ NDI UD- N/AD:]

oxidation?

The skid and anchorbolts are painted red. There was no corrosion noted.

4. Is the anchorage free of visible cracks in the concrete near the YZ NDI U[-] N/AD1 anchors?

The equipment is mounted on a pedestal that is attached to the reinforced concrete floor. The pedestal and floor are epoxy coated.

There were no cracks observed in the pedestal or the floor.

5. Is the anchorage configuration consistent with plant documentation? Y[9 NDI UiD N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorageconfigurationis consistent with 11405-S-69, Rev. 5.

6. Based on the above anchorage evaluations, is the anchorage free of YZ NDJ UED potentially adverse seismic conditions?

'Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 98 OF 403 1K Interaction Effects Other Adverse Conditions Other Adverse Conditions Kevin Bessel!

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 99 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 3 Status: YE ND- U[-I Seismic Walkdown Checklist (SWC) SWC- 23 Equipment ID No. FW-6 Equip. Class' 5, HORIZONTAL PUMPS Equipment Description AUXILIARY FEEDWA TER PUMP (MOTOR-DRIVEN)

PhotoQraDhs I1I4Uv-- IVidlIIId lIa.OU Note:

equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 100 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nn UnI Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class, 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Location: Bldg. INTAKE Floor El. 994' Room, Area INTAKE, 1E'CC-1N'103 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-] No of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ ND: ULi N/AD-Welded.
3. Is the anchorage free of corrosion that is more than mild surface Y[ ND UiE N/AD--

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YN ND-] UD-- N/AD--

anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 101 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE]1 UE]

Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class2 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP

5. Is the anchorage configuration consistent with plant documentation? YE] NE] UI- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ N[-] UE--

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YE] NE:] UE] N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NEI UE] N/AE]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YN NE] UE] N/A[-]
10. Based on the above seismic interaction evaluations, is equipment free Y[ N] U--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 102 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Nn U-II Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class3 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NE] U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch ýý,I- ________-----__Date: 8/17/2012 John Kao~"-' 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 103 OF 403 SEISMIC WALKOOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NEI UI Seismic Walkdown Checklist (SWC) SWC- 24 Equipment ID No. AC-10B Equip. Class4 6. VERTICAL PUMPS Equipment Description RAW WATER PUMP Photographs Note: Equipment Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 104 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN Nt-] Ut-]

Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Classi 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Location: Bldg. INTAKE Floor El. 994' Room, Area INTAKE, 1E'CC-1N'104 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-] NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO Nt-] Ut-] N/At]

Welded.

3. Is the anchorage free of corrosion that is more than mild surface YN N] UtI] N/At-]

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YN Nt] Ut] N/At]

anchors?

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 105 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ N--1 U[--

Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Class2 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP

5. Is the anchorage configuration consistent with plant documentation? YOI NI U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YN NOi- UI-potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YD ND UD N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ ND UD N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YZ NDI U-- N/AD
10. Based on the above seismic interaction evaluations, is equipment free YN N- U-of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 106 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YO ND-] U[--

Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Class3 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YE NRi U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch/it / -- Date: 8/17/2012 John Kaowi- 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 107 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Nn U-Seismic Walkdown Checklist (SWC) SWC- 25 Equipment ID No. AC-10D Equip. Class4 6, VERTICAL PUMPS Equipment Description RAW WATER PUMP Photographs Note: Equipment Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 108 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y] NDl UD--

Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. ClassI 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2A,B&C/SI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Location: Bldg. AUX Floor El. 992' Room, Area 6, 9W'T-2N'6E Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y-I NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO N-- U[- N/ADl
3. Is the anchorage free of corrosion that is more than mild surface Y[ NDI UlI N/AD oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YZ NDI UlI N/AD anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 109 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NF1 U--

Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/SI-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE

5. Is the anchorage configuration consistent with plant documentation? YEI ND- UiI N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ ND] ULI potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[-- NDJ UiD N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NElI UEL N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? Y[ NDI UD- N/AD
10. Based on the above seismic interaction evaluations, is equipment free YZ Nn UD of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 110 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ N U-il Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/Sl-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NE] U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/20/2012 Alex Smerch I 8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 111 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND U--

Seismic Walkdown Checklist (SWC) SWC- 26 Equipment ID No. HCV-474 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SI-1A&B,2AB&C/Sk-3A-C BRG CLRS CCW INLET HEADER ISOLATION VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 112 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN NR Ut]-1 Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE Location: Bldg. AUX Floor El. 993' Room, Area 4, 2E'E-22N'5B Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Yt] NN of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YEI NE]I Ut] N/AN
3. Is the anchorage free of corrosion that is more than mild surface YE] NE] Ut] N/AZ oxidation?
4. Is the anchorage free of visible cracks in the concrete near the Y[] Nt] Ut] N/AZ anchors?

' Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 113 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE N] UI-Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE

5. Is the anchorage configuration consistent with plant documentation? Y-- Nil ULI N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of Y[ NFi- UI-potentially adverse seismic conditions?

In-line valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[-- NE:] U-- N/AM Not a soft target
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NE] UrI N/A[D]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y; NE] U0 N/AD:
10. Based on the above seismic interaction evaluations, is equipment free YN NE] UEI of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 114 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Nn Ut]

Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A CCW OUTLET VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ Nt] Ut]

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/20/2012 Alex Smerch IdLl_ -- _ __ __---__ __8/20/2012

3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 115 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM ND-- URi-Seismic Walkdown Checklist (SWC) SWC- 27 Equipment ID No. HCV-484 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SHUTDOWN COOLING HT EXCH AC-4A COW OUTLET VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 116 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: Y] NR URII Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Location: Bldg. AUX Floor El. 992' Room, Area 4, 10W'D-lN'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-] NZ of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Y-I NEI- U-II N/AZ
3. Is the anchorage free of corrosion that is more than mild surface YEI NEI- U-- N/AZ oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YLI NEIl UL- N/AZ anchors?

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 117 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND] U-I Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE

5. Is the anchorage configuration consistent with plant documentation? Y[-] NDi UL N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YM N[] UL potentially adverse seismic conditions?

In-line valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ NDi UI[ N/AD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NO U-- N/AD-I and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YN NDI UED N/AD-
10. Based on the above seismic interaction evaluations, is equipment free Y ; N-- U--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 118 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NE] U7]

Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NE] UE--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/20/2012 8//

Alex Smerch I'LI-r *"'--'--'..8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 119 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM ND UD Seismic Walkdown Checklist (SWC) SWC- 28 Equipment ID No. HCV-489B Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A CCW OUTLET VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 120 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NDI U-I Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Location: Bldg. AUX Floor El. 991' Room, Area 4, 2E'E-8S'7A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[I NEK of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Y[I- N[l ULi N/AZ
3. Is the anchorage free of corrosion that is more than mild surface YEi NiD ULi N/AZ oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YD NE] UD N/AZ anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 121 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN NR U-I Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE

5. Is the anchorage configuration consistent with plant documentation? YFj NE] UD-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ ND U0-I potentially adverse seismic conditions?

In-line valve.

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YE] N-- UD] N/A[Z
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YO-' NI U0] N/AZ and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YDI NEI UD- N/A[Z
10. Based on the above seismic interaction evaluations, is equipment free YZ NI U-of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 122 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM Ni I U--

Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NE] U-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/20/2012 Alex Smerch / *- 8/20/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 123 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN N[-- UL-Seismic Walkdown Checklist (SWC) SWC- 29 Equipment ID No. HCV-497 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D CCW BYPASS LINE ISOLATION VALVE Photographs 4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 124 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE NR UD Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Location: Bldg. AUX Floor El. 1037' Room, Area 72, 8W'JI-12N'7A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YE] NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Y[-- ND:] UDJ N/AZ
3. Is the anchorage free of corrosion that is more than mild surface Y[-] ND-] u[-] N/AZ oxidation?
4. Is the anchorage free of visible cracks in the concrete near the Y-- ND- U0 N/AM anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 125 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN NI- U--

Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE

5. Is the anchorage configuration consistent with plant documentation? YOI NEI UOi N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of Y[ NI- u--

potentially adverse seismic conditions?

In-line valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YOI NDI UD N/A[
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NEI Ui N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YZ ND UD N/AZ
10. Based on the above seismic interaction evaluations, is equipment free YX NO UD of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 126 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NR UL-I Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ N[: UI--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/18/2012 Alex Smerch Ll- __ _ __---_ __ _ _ _8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 127 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ Nn] Ut]

Seismic Walkdown Checklist (SWC) SWC- 30 Equipment ID No. TCV-893 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description AIR CONDITIONER VA-46A CCW SUPPLY TEMPERATURE CONTROL VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 128 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y9 N-- U--

Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Location: Bldg. INTAKE Floor El. 1001' Room, Area INTAKE, 6E'CC-4S'103 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YLI NE of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Yi-] NE]l Ui-] N/A In-line valve.
3. Is the anchorage free of corrosion that is more than mild surface YEll N ll UI-- N/AZ oxidation?

In-line valve.

4. Is the anchorage free of visible cracks in the concrete near the YEll NEl UI- N/AZ anchors?

In-line valve.

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 129 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND- UD--

Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE

5. Is the anchorage configuration consistent with plant documentation? YOI ND UD N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ ND UD--

potentially adverse seismic conditions?

N/A In line valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO NDI uD N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN ND UD" N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? Y[ ND UD N/AD
10. Based on the above seismic interaction evaluations, is equipment free YN ND-- UD-1 of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 130 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM NFi- UI-Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN N[il URI-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch 11L' Date: 8/17/2012 John Kao 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 131 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ Ni1 UI--

Seismic Walkdown Checklist (SWC) SWC- 31 Equipment ID No. HCV-2874A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 132 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YE NFi ULI Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Location: Bldg. INTAKE Floor El. 1001 Room, Area INTAKE, 6E'CC-7N'103 Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO- NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YEI Ni UEi N/AN In-line valve.
3. Is the anchorage free of corrosion that is more than mild surface Y[-] NOI- UI- N/A[

oxidation?

In-line valve.

4. Is the anchorage free of visible cracks in the concrete near the Y[-] NFO uLI- N/A[

anchors?

In-line valve.

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 133 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE] ULI Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE

5. Is the anchorage configuration consistent with plant documentation? YE]- NEI ULi N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

In-line valve.

6. Based on the above anchorage evaluations, is the anchorage free of YZ NE] UE]

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YE] NE] UE] N/AN
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YE NE] UE] N/AE]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ NE] UE] N/AE-]
10. Based on the above seismic interaction evaluations, is equipment free Y[ NE] UE of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 134 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE Ni D U--

Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NE] U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch Al _ _ _ __-,_ _ _ Date: 8/17/2012 John Kao 8/17/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 135 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM Ni I UD Seismic Walkdown Checklist (SWC) SWC- 32 Equipment ID No. HCV-2875A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER PUMPS DISCH HEADER ISOLATION VALVE Photographs Note: Equipment Tag. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 136 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YX NR U[*

Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Location: Bldg. AUX 993' Room, Area 18, 13E'D-12S'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YOI NZ of the 50% of SWEL items requiring such verification)?

In-line valve.

2. Is the anchorage free of bent, broken, missing or loose hardware? Y[:] NF] UL N/A]

In-line valve.

3. Is the anchorage free of corrosion that is more than mild surface Y[-] N[-] U[-] N/AZ oxidation?

In-line valve.

4. Is the anchorage free of visible cracks in the concrete near the YE] Ni[] LID N/AZ anchors?

In-line valve.

' Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 137 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ N-- U[--

Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE

5. Is the anchorage configuration consistent with plant documentation? Y[-] NDi ULI N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

In-line valve.

6. Based on the above anchorage evaluations, is the anchorage free of Y Z NE[-I ULFI potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YDI NDl uiD N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NE UI-] N/ADI and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? Y[K ND] Ur- N/AD-I
10. Based on the above seismic interaction evaluations, is equipment free YM ND UD of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 138 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NF1 U-1 Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NO UD adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch /[*- _ _ _ _ _ _ _ _ _ Date: 8/21/2012 John Kao 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 139 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ N-II UD-Seismic Walkdown Checklist (SWC) SWC- 33 Equipment ID No. HCV-2877A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP CLG HT EXCHS AC-1A-D RAW WATER INLET HDR ISOLATION VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 140 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YE N-i ULI Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Location: Bldg. AUX 994' Room, Area 18, 13E'D-6S'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YE] NZ of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YE] NE] U-II N/AZ In-line valve.
3. Is the anchorage free of corrosion that is more than mild surface YE] N-- UEl N/AZ oxidation?

In-line valve.

4. Is the anchorage free of visible cracks in the concrete near the YE] NE] UE] N/AN anchors?

In-line valve.

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 141 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NI- U--

Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE

5. Is the anchorage configuration consistent with plant documentation? Y-I NE] U[-] N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

In-line valve.

6. Based on the above anchorage evaluations, is the anchorage free of YZ NEi Ur]

potentially adverse seismic conditions?

In-line valve.

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YE] NE]1 uE] N/AN
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NEi UE- N/AE]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[9 NE] urE- NIAE]
10. Based on the above seismic interaction evaluations, is equipment free Y[ N[] UE]

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 142 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE NI-D UL--

Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NE] U--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch /*< A --- Date: 8/21/2012 John Kao 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 143 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NF] UL--

Seismic Walkdown Checklist (SWC) SWC- 34 Equipment ID No. HCV-2880A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description COMP COOLING HT EXCH AC-1A RAW WATER INLET VALVE Photographs Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 144 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ Nl U-II Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO CCW ISOLATION VALVE Location: Bldg. AUX 993' Room, Area 18, 13E'D-19S'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-] NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YEI N] U[i-I N/A
3. Is the anchorage free of corrosion that is more than mild surface Y[-] N[D UD] N/A[

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YLI NiD UDl N/AZK anchors?

IEnter the equipmentclass name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 145 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NR] UI-Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO COW ISOLATION VALVE

5. Is the anchorage configuration consistent with plant documentation? YEI NEI UiI N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ NEi Ut]

potentially adverse seismic conditions?

In-line valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YE] NE] Ut] N/AZ Not a soft target
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NEI U-- N/At:]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[ NEI u0- N/At-]
10. Based on the above seismic interaction evaluations, is equipment free YN NEI Ut]

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 146 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NF] UM Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO CCW ISOLATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN N[I] UI-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch /'- A L' Date: 8/21/2012 John Kao F* 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 147 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NEI UDl Seismic Walkdown Checklist (SWC) SWC- 35 Equipment ID No. HCV-2893 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description RAW WATER TO 0CW ISOLATION VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 148 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE NiD UI-Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Location: Bldg. CONT Floor El. 1045' Room, Area CONT, 14W'DD-6N'II Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO-- NN of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YE] NEI- u-I N/A[
3. Is the anchorage free of corrosion that is more than mild surface Y[I- N[ll U[i N/AZ oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YO-- NEl U[-] N/A anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 149 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND UD-1 Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE

5. Is the anchorage configuration consistent with plant documentation? YE] NE] U-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ NE] ULII potentially adverse seismic conditions?

In Line Valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YD] NDJ UD-- N/AZ Not a soft target
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NE] U-I N/ADI and masonryblock walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YN ND] UD! N/AD-]
10. Based on the above seismic interaction evaluations, is equipment free YZ NDl UDl of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 150 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ ND U[-

Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NE] U--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary) k~Zo Evaluated by: John Kao Date: 8/22112 Alex Smerch'ilL /1* 8/22112 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 151 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ NF U-Seismic Walkdown Checklist (SWC) SWC- 36 Equipment ID No. HCV-240 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description PRESSURIZER RC-4 AUXILIARY SPRAY INLET VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 152 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: Y[ N--1 U--1 Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Location: Bldg. AUX Floor El. 992' Room, Area 7, 45W'T-2N'7B Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[ NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN Nr U-- N/A[:
3. Is the anchorage free of corrosion that is more than mild surface YN N- U[I N/AD--

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the Y[ N- U[: N/AD-anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 153 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ ND-- U-I Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A,B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV

5. Is the anchorage configuration consistent with plant documentation? YO NN U-I N/AD (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Needs plant documentation to verify. See sketch in photos section.

Licensing Basis Evaluation is required.

6. Based on the above anchorage evaluations, is the anchorage free of YD-- NN UD potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YN ND UDl N/A[-]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ ND UDi N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YZ ND UD N/AD
10. Based on the above seismic interaction evaluations, is equipment free YN ND UD--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 154 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NiI UFi--

Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1AB&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NEil UI--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch JIL' Date: 8/20/12 Va"o John Kao 8/20/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 155 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ NE] UE-Seismic Walkdown Checklist (SWC) SWC- 37 Equipment ID No. LCV-218-3 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description CHRG PUMPS CH-1A.B&C SUCT HDR SAFETY INJ & BORIC ACID SUPPLY VLV Photographs

-7 Note: Equipment. Note: Sketch of plan view of vertical I-beam support anchorage.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 156 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YZ NR U-Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. Class, 7. PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Location: Bldg. AUX Floor El. 991' Room, Area 19, 3W'C-7N'3AA Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YOI NM of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YEI NE] ULi N/A[
3. Is the anchorage free of corrosion that is more than mild surface Y[I- N[Il U[I- N/AN oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YF-] N[:] UL-] N/AN anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 157 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y] NR UR Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. ClasS2 7, PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMPFW-10 RECIRCULATION VALVE

5. Is the anchorage configuration consistent with plant documentation? Y-I NEI ULi N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YO ND-] UD-potentially adverse seismic conditions?

N/A Inline Valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y-I NE:l UiD N/A[

Valve is not a soft target.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YD- NZ Ul N/AD and masonry block walls not likely to collapse onto the equipment?

Unistrut above missing clamp and just resting on support. Could fall.

CR 2012-10198 has been initiated.

9. Do attached lines have adequate flexibility to avoid damage? YZ NEil UD- N/AD-]

There are multiple elbows for attached line showing flexibility.

10. Based on the above seismic interaction evaluations, is equipment free YDI NZ u-D of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 158 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[Z Ni-- UP Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NEil Ui-adversely affect the safety functions of the equipment?

There is a chain attached. This item is not seen as a credible source as it does not have much mass.

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch 1U, " _ _._ _ Date: 8/13/12 John Kao 8113/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 159 OF 403 SEISMIC WALKDOWN CHECKLIST FoRM Sheet 4 of 4 Status: YIN ND-- U-]

Seismic Walkdown Checklist (SWC) SWC- 38 Equipment ID No. FCV-1369 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description TURB-DRIVEN AUX FEED PUMP FW-1O RECIRCULATION VALVE Photographs Note: Unistrut Missing Clamp.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 160 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ NI 1 UD-1 Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1 107A Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Location: Bldg. CONT Floor El. 1050' Room, Area CONT, 15W'BB-9N'II Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[I NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NEI UD- N/AD-
3. Is the anchorage free of corrosion that is more than mild surface YN ND I UJ N/AD oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YN ND-- UD-- N/AD--

anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 161 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NR U-Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1107A Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE

5. Is the anchorage configuration consistent with plant documentation? Y-I NEI U-] N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ N[-] U[-D potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ ND] UF- N/ADl
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEIl UD N/AD1 and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YZ NDI U-- N/AD
10. Based on the above seismic interaction evaluations, is equipment free Y[ ND] UL-of potentially adverse seismic interaction effects?

2 Enter tie equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 162 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ NFI U-Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1107A Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NE[] U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/22/2012 8/

'L- "/*/"--m..*8/22/2012 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 163 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND-- UD--

Seismic Walkdown Checklist (SWC) SWC- 39 Equipment ID No. HCV-1107A Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Photographs No photographs were able to be taken of the item.

Note: Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 164 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ ND IUi-Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Class' 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Location: Bldg. AUX Floor El. 1038' Room, Area 81, OW'H-4N'3A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YE NFI of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN ND] ULi N/A[-D
3. Is the anchorage free of corrosion that is more than mild surface Y[ NDl UI- N/A--

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YN ND] UDl N/AD anchors?

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 165 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ ND U--I Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE

5. Is the anchorage configuration consistent with plant documentation? YEI NN UD N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Needs plant documentation to verify anchorage.See sketch in photos section. Licensing Basis Evaluation is required.

6. Based on the above anchorage evaluations, is the anchorage free of YEI NM U-I potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ NDl UD- N/AD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NDI uDl N/ADl and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? Y[ NDI UDl N/AD-
10. Based on the above seismic interaction evaluations, is equipment free YZ NiDI UDl of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 166 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: YZ NE] U--

Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NE] UI-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch Al Date: 8/18/2012 John Kao U 8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 167 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YX NL-1 U-Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1 107B Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Photographs Note: Equipment and supports. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 168 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YO N-- U-Seismic Walkdown Checklist (SWC) SWC- 40 Equipment ID No. HCV-1107B Equip. Classw 7, PNEUMATIC-OPERATED VALVES Equipment Description STEAM GENERATOR RC-2A AUXILIARY FEEDWATER INLET VALVE Note: Vertical Support Footprint.

5 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 169 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN NF] U--

Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Location: Bldg. AUX Floor El. 1039' Room, Area 81,22E'D-21N'5B Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[:] NN of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Y[] N[l UL-I N/A
3. Is the anchorage free of corrosion that is more than mild surface YEi N[l U[I] N/AZ oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YE- NE U[:] N/AN anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 170 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NEI U-I Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE

5. Is the anchorage configuration consistent with plant documentation? YOI N- UO-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ N[--i U-I potentially adverse seismic conditions?

In-line valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO ND UD N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN ND UD N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YZ NDI UD N/A[D
10. Based on the above seismic interaction evaluations, is equipment free YN N[D U--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 171 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N- ULIM Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ N[I Ui-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/18/2012 Alex Smerch £ " 8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 172 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ ND1 UD Seismic Walkdown Checklist (SWC) SWC- 41 Equipment ID No. HCV-1384 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description MAIN AND AUXILIARY FEEDWATER CROSSCONNECT VALVE Photographs I

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 173 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN ND-- UD Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class, 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Location: Bldg. AUX Floor El. 1008' Room, Area 64, 3W'F-28N'1A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO-- NZ of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? Y[:] NEI U[I: N/AZ
3. Is the anchorage free of corrosion that is more than mild surface Y[-] N[-] UD- N/AZ oxidation?
4. Is the anchorage free of visible cracks in the concrete near the Y-I NE] U0i N/AZ anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 174 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ Ni 1 UFD Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class2 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE

5. Is the anchorage configuration consistent with plant documentation? YEI N-I U-I N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of Y[ N[il U[-

potentially adverse seismic conditions?

N/A, In-line valve Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[] ND_1 UFD N/AZ
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NDI UD- N/AD-and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? Y[K NDl UD- N/AD-
10. Based on the above seismic interaction evaluations, is equipment free YN ND] UD of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 175 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ Nn Ut]

Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class3 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NEI- U-]

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch _&I- ,_ _ _ _ _ _ Date: 8/15/2012 John Kao 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 176 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM NR Ui--

Seismic Walkdown Checklist (SWC) SWC- 42 Equipment ID No. SA-193 Equip. Class4 7, PNEUMATIC-OPERATED VALVES Equipment Description SECONDARY STARTING AIR PRESSURE REGULATION VALVE Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 177 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE ND1 UDl Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class, 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Location: Bldg. CONT Floor El. 1060' Room, Area CONT, OW'BB-24N'III Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO-- NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO ND UD- N/ADl
3. Is the anchorage free of corrosion that is more than mild surface Y[ NDl U[-] N/AI-I oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YE ND UD-- N/AD anchors?

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 178 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YN ND-- UD--

Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class2 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING

5. Is the anchorage configuration consistent with plant documentation? Y-I NEI U-- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YZ NDl UiD potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[] NEI UDl N/AZ Large metal housing structure.
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ N[-] UrI N/AD-1 and masonry block walls not likely to collapse onto the equipment?

Adequately supportedpolar crane overhead.

9. Do attached lines have adequate flexibility to avoid damage? YDI NEI UD- N/AZ
10. Based on the above seismic interaction evaluations, is equipment free YZ NLiI U--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 179 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ N-- UMli Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class3 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NE] UD-]

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch Date: 8/27/12 Kevin Bessell 8/27/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 180 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ ND UL-I Seismic Walkdown Checklist (SWC) SWC- 43 Equipment ID No. VA-15B Equip. Class4 10, AIR HANDLERS Equipment Description CONTAINMENT AIR COOL/FILTER UNIT B HOUSING Photographs Note: Equipment (large housing). Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 181 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN Ni 1 ULI Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class, 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Location: Bldg. AUX Floor El. 1036 Room, Area 72, 8W'JI-12N'7A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y-I NN of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN N[D] U[] N/AD--
3. Is the anchorage free of corrosion that is more than mild surface YN NDl UD-] N/AD oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YZ ND: UDl N/AD anchors?

'Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 182 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YZ NE]1 U--1 Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class2 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT

5. Is the anchorage configuration consistent with plant documentation? YE] No] UEZ N/A[

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of Y[ NE]1 UiI potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YEI NE] UE] N/A[
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEI UE] N/AE]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[ NEI UE] N/A[-]
10. Based on the above seismic interaction evaluations, is equipment free YN N[] UE of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 183 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ N1 UL--

Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class3 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NE] ULi adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8121/2012 Alex Smerch 11 L-- 8/21/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 184 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YN N-] UD Seismic Walkdown Checklist (SWC) SWC- 44 Equipment ID No. VA-46A Equip. Class4 10, AIR HANDLERS Equipment Description CONTROL ROOM AIR CONDITIONING UNIT Photographs

'V"A-w46A CONRO ROO AIRMBDTINWUEI Note: Equipment Tag. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 185 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YE ND1 U[--

Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description PANEL BOARD Location: Bldg. AUX Floor El. 1036' Room, Area 77, AI-41A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YE- NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO ND] UD- N/A[D-
3. Is the anchorage free of corrosion that is more than mild surface YO ND] UD- N/AD-oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YE] ND] UID N/AZ anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 186 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YM NR U--i Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description PANEL BOARD

5. Is the anchorage configuration consistent with plant documentation? YOI Ni UOi- N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YM NE] UDJ potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ ND UD N/AD
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NDI U- N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YM ND UM N/A[D
10. Based on the above seismic interaction evaluations, is equipment free YN ND- UDl of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 187 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YN NR U[--

Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description PANEL BOARD Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NE] UFI--

adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/18/2012 Alex Smerch 8/18/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 188 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE Nn UL-]

Seismic Walkdown Checklist (SWC) SWC- 45 Equipment ID No. DC-BUS-AI-41A Equip. Class4 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description PANEL BOARD Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 189 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN NDl U-]

Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Location: Bldg. AUX Floor El. 1011' Room, Area 56, 9W'C-ON'7A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y[-i NO of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YO ND I U[I N/ADl
3. Is the anchorage free of corrosion that is more than mild surface Y[ N--II UL-- N/AF-D oxidation?
4. Is the anchorage free of visible cracks in the concrete near the Y[ NE] U[i N/ADý anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 190 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ NE] UE]

Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL

5. Is the anchorage configuration consistent with plant documentation? YEI NE] UI- N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)
6. Based on the above anchorage evaluations, is the anchorage free of YO NEI U-I potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[] NO uE-] N/AE:]

There is only a 3/8" gap between this equipment and other safety related equipment (EE-8C) nearby, raising the possibility of out of phase displacement between these different pieces of equipment, and banging against each other. CR 2012-10427 has been initiated.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NEi UE] N/AE]-

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y] NE] UE:] N/AE-]
10. Based on the above seismic interaction evaluations, is equipment free YE] NO UE-]

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 191 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: Y[ Ni D UD--

Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NE] Ur-L adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch Date: 8/16/2012 W4-o John Kao 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 192 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: Y[ NFI- UI]

Seismic Walkdown Checklist (SWC) SWC- 46 Equipment ID No. EE-8F Equip. Class4 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description 125V DC NUMBER 1 MAIN DISTRIBUTION PANEL Photographs Note: Equipment. Note: Gap between pieces of equipment.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 193 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YZ N-- U--

Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Class, 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description BUS Location: Bldg. AUX Floor El. 1036' Room, Area 77, AI-40A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YE-- NEI of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NDI UD- N/AD1
3. Is the anchorage free of corrosion that is more than mild surface YN ND UD- N/AD-]

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YD- ND- uLI N/AZ anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 194 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: Y[ ND U--

Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Class2 14, DISTRIBUTION PANELS AND AUTOMA TIC TRANSFER SWITCHES Equipment Description BUS

5. Is the anchorage configuration consistent with plant documentation? YEI NE-] U-I N/A[

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YZ No U--

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YN NEI U0 N/AD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ N[-] U-- N/AL]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ NEI U-- N/A[-]
10. Based on the above seismic interaction evaluations, is equipment free Y[O NEI UEi of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 195 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YZ NiD UDJ Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Class3 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description BUS Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y] NE] UI-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao ? Date: 8/18/2012 Alex Smerch " 8/18/2012 3 Enter the equipment class name fromn Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 196 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YZ NFD U--i Seismic Walkdown Checklist (SWC) SWC- 47 Equipment ID No. I-BUS-A Equip. Classw 14, DISTRIBUTION PANELS AND AUTOMATIC TRANSFER SWITCHES Equipment Description BUS Photographs Note: Equipment. Note:

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 197 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet I of 4 Status: YN Nn U-Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class, 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Location: Bldg. AUX Floor El. 1012' Room, Area 54, 9W'C-15N'7B Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YN NDI of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NE] U-I N/AD--
3. Is the anchorage free of corrosion that is more than mild surface YZ ND] UD:] N/AD-]

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YZ ND] UDJ N/ADl anchors?

'Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 198 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE ND-- UD--

Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class2 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1

5. Is the anchorage configuration consistent with plant documentation? YEI NN UiI N/A[-]

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

There is no anchoragedocumentation. Anchorage pattern attachedin photos below. Licensing Basis Evaluation is required.

6. Based on the above anchorage evaluations, is the anchorage free of YD NZ UI--

potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[ N[D] UD-- N/AD-
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NDI UEl N/AD and masonry block walls not likely to collapse onto the equipment?
9. Do attached lines have adequate flexibility to avoid damage? YDI NEI UD- N/As No attachedlines.
10. Based on the above seismic interaction evaluations, is equipment free Y[9 N[D] UD--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 199 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YM ND-- U-Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class3 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NEil UI-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: John Kao Date: 8/15/12 84

"*'-". .8/15/12 Alex Smerch 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 200 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YM Nil U-il Seismic Walkdown Checklist (SWC) SWC- 48 Equipment ID No. EE-8A Equip. Class4 15, BATTERY RACKS Equipment Description 125 VDC STATION BATTERY NO. 1 Photographs 35 34 6446 64 35 34 No photo was able to be taken for 4 44 45 45 component.

34 34 IShower (Ref.)

Above Is a plan sketch of the 16 anchor bolts foi the Batneiy Racks.

All DIhensIons alse In Inches.

All anchoi dianieleis ame 35-Note: Field measured anchor dimensions for Note:

battery rack (requireLB verification).

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 201 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YN ND- U--

Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class' 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 Location: Bldg. AUX Floor El. 1011' Room, Area 56, 9W'C-13N'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YN NE]

of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NDI UiE N/A[D
3. Is the anchorage free of corrosion that is more than mild surface YZ N: U-IE] N/A-]

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YE NEI Ui] N/AD anchors?

Some surface pitting of the concrete, not near embedded plates.

Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 202 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y[ Nil UEi-Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class2 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1

5. Is the anchorage configuration consistent with plant documentation? Y-I NO U0I- N/AFiI (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Needs plant documentation. See sketch in photo's section. Licensing Basis Evaluation is required.

6. Based on the above anchorage evaluations, is the anchorage free of YI- N[ UI-potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[I NO ULI N/AD-]

There exists a between a 0"and 3/8" gap between EE-8C and EE-8F.

These are two independently anchoredpieces of equipment which during out of phase seismic motion could come into contact. CR 2012-10427 has been initiated.

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YDI NZ U[-- N/AD-and masonry block walls not likely to collapse onto the equipment?

There are fluorescent light bulbs in hallways near equipment that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.

9. Do attached lines have adequate flexibility to avoid damage? Y-I ND ULI N/AZ
10. Based on the above seismic interaction evaluations, is equipment free Y[-- NO UD--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 203 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[ NR UR Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class3 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YN NEi U-I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

D

"___________________Date: 8/16/12 Evaluated by: Alex Smerch "

V-"O John Kan 8/16/12 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 204 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: YE N[-i UI-Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class4 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 Photographs rlý.I I

71, Note: Sketch of Anchorage Note: 3/8" Gap Between EE-8C and EE-8F.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 205 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YM N[-- U-I Seismic Walkdown Checklist (SWC) SWC- 49 Equipment ID No. EE-8C Equip. Class5 16, BATTERY CHARGERS AND INVERTERS Equipment Description 125V DC BATTERY CHARGER NUMBER 1 5 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 206 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YZ Nn U F1 Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class, 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" Location: Bldg. AUX Floor El. 1011' Room, Area 56, 7W'C-6N'6D Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YZ NEI of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YN ND:] UD- N/AD-
3. Is the anchorage free of corrosion that is more than mild surface YZ NDl UD-I N/AD--

oxidation?

4. Is the anchorage free of visible cracks in the concrete near the YZ ND] UD] N/ADl anchors?

'Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 207 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: Y[ Nn U n Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class2 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A"INVERTER "A"

5. Is the anchorage configuration consistent with plant documentation? Y-I NE U-I N/A--

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Anchorage attachment drawings to Plant floor could not be found. A licensing basis evaluation is required.

6. Based on the above anchorage evaluations, is the anchorage free of Y-I No U-I potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[ NDI UM N/AD]
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YDI NZ UD-] N/AD[

and masonry block walls not likely to collapse onto the equipment?

Fluorescentlight bulbs overhead that are not caged which could cause a potentially adverse seismic condition with nearby equipment. CR 2012-10423 has been initiated.

9. Do attached lines have adequate flexibility to avoid damage? Y[ ND:- Ur- N/AD-
10. Based on the above seismic interaction evaluations, is equipment free YDI NZ UD--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 208 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[K ND-1 U []

Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class3 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NDl U--I adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch _ _ _ __-_ _ Date: 8/16/2012 John Kao 8/16/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 209 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: Y[ Nil1 U IF Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class4 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A" INVERTER "A" Photographs Note: Equipment Tag Note: F-lu overhead.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 210 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: Y[ ND I U[--I Seismic Walkdown Checklist (SWC) SWC- 50 Equipment ID No. EE-8H Equip. Class5 16, BATTERY CHARGERS AND INVERTERS Equipment Description INSTRUMENT BUS "A"INVERTER "A" Mounting base (typ.) I Note: Anchorage configuration sketch. Note:

s Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 211 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 4 Status: YN ND-1 UF-]

Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class, 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2 Location: Bldg. AUX Floor El. 1010' Room, Area 64, 3E'F-7S'2B Manufacturer, Model, Etc. (optional but recommended) GM Electromotive 20-645-E4 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YN NE]

of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YZ N[I U[I N/ALR
3. Is the anchorage free of corrosion that is more than mild surface YZ NEI ULI N/AF-D oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YZ NEJ UEl N/AD--

anchors?

IEnter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 212 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 4 Status: YE NE-- Ur]

Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class2 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2

5. Is the anchorage configuration consistent with plant documentation? Y[ N[il U-I N/AL]

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

The anchorageis consistent with drawing 11405-S-52, Rev. 6 (File#

16437).

6. Based on the above anchorage evaluations, is the anchorage free of YZ Ni-- U-il potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y[E] NR] U[E] N/A[A Not a soft target
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NE] UM] N/A[L]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y[ NE] U[-] N/AL]
10. Based on the above seismic interaction evaluations, is equipment free Y[K N[-] UE--

of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 213 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 4 Status: YE ND I U[-

Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class3 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2 Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[-] No UI--

adversely affect the safety functions of the equipment?

Insulation of piping on top of generatormay have not been included in originalseismic analysis. CR 2012-10369 has been initiated.

Comments (Additional pages may be added as necessary)

Evaluated by: Alex Smerch ._ _ _ _ _ _ Date: 8/15/2012 John Kao 8/15/2012 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. I ATTACHMENT 11.2 PAGE 214 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 4 Status: YE NiI ULi Seismic Walkdown Checklist (SWC) SWC- 51 Equipment ID No. DG-2 Equip. Class4 17, ENGINE GENERATORS Equipment Description EMERGENCY DIESEL GENERATOR #2 Photographs Note: Equipment Note: Insulated line on top of generator.

4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 215 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 1 of 5 Status: YN NF] U--

Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class, 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Location: Bldg. AUX Floor El. 993' Room, Area 19, IW'C-4S'4A Manufacturer, Model, Etc. (optional but recommended)

Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YZ NEI of the 50% of SWEL items requiring such verification)?
2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NEil U[-I N/A[ID
3. Is the anchorage free of corrosion that is more than mild surface YZ Nil U0I N/AI-I oxidation?
4. Is the anchorage free of visible cracks in the concrete near the YN N[:] U[I N/AD--

anchors?

I Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 216 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 2 of 5 Status: YZ NFil U-1 Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class2 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMPFW-6 SUCTION FLOW TRANSMITTER

5. Is the anchorage configuration consistent with plant documentation? Y-I NZ U-- N/AD-(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

Drawing 3143K10-058, Sh. 1, Rev. 10 (File# 9906) is used for anchorage configuration verification. Item anchoragemay not be consistent with Plant documentation since anchorangle plate is rotated flipped (see photo below and reference drawing). Note on drawing states to see drawing 11405-M-54, Sh. 20 for field configuration. More information is needed and a Licensing Basis Evaluation is required.

6. Based on the above anchorage evaluations, is the anchorage free of YD] NZ U0-potentially adverse seismic conditions?

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ ND:] uD:- N/ADl
8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YN NDi uD- N/AD-]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YN ND] UD-- N/AD--
10. Based on the above seismic interaction evaluations, is equipment free YO Nr- UFD of potentially adverse seismic interaction effects?

2 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 217 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 3 of 5 Status: Y[ ND!U-I Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class3 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could Y[ NE Ui-J adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

V-"~

Evaluated by: John Kao Date: 8/13/12 A8 Alex Smerch ['- / ------- 8113112 3 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 218 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 4 of 5 Status: Y[ NO UD-Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class4 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMPFW-6 SUCTION FLOW TRANSMITTER Photographs Note: Side view of equipment showing its Note: Equipment close to combustibles.

mounting bracket flipped from configuration (Acceptable for maintenance area under SO-drawing. G-91) 4 Enter the equipment class name from Appendix B: Classes of Equipment.

EA12-021, Rev. 1 ATTACHMENT 11.2 PAGE 219 OF 403 SEISMIC WALKDOWN CHECKLIST FORM Sheet 5 of 5 Status: YN NR ULI Seismic Walkdown Checklist (SWC) SWC- 52 Equipment ID No. FT-1368 Equip. Class5 18, INSTRUMENT RACKS Equipment Description MOTOR-DRIVEN AUX FEED PUMP FW-6 SUCTION FLOW TRANSMITTER Note: Equipment. Note: Equipment Wall anchorage.

5Enter the equipment class name from Appendix B: Classes of Equipment.

Retrieved from "https://kanterella.com/w/index.php?title=LIC-13-0070,_Engineering_Report_EA12-021,_Revision_1,_Seismic_Walkdown_Submittal_Report_for_Resolution_of_Fukushima_Near-Term_Force_Recommendation_2.3:_Seismic._Part_1_of_2&oldid=2456242"