ML18024A393

Updated Final Safety Analysis Report (Ufsar), Amendment 27, Appendix K - Reactor Pressure Vessel Design

ML18024A393
Person / Time
Site:	Browns Ferry
Issue date:	10/05/2017
From:	Tennessee Valley Authority
To:	Office of Nuclear Reactor Regulation
Shared Package
ML18018A778	List: ML18018A780 ML18018A781 ML18018A783 ML18018A784 ML18018A785 ML18018A787 ML18018A788 ML18018A790 ML18018A792 ML18018A793 ML18018A795 ML18018A796 ML18018A797 ML18018A798 ML18018A800 ML18018A801 ML18018A802 ML18018A804 ML18018A806 ML18018A807 ML18022A114 ML18022A115 ML18022A116 ML18022A117 ML18022A118 ML18022A119 ML18022A120 ML18022A121 ML18022A123 ML18022A124 ML18022A125 ML18022A127 ML18022A128 ML18022A129 ML18022A130 ML18022A131 ML18022A132 ML18022A133 ML18022A148 ML18022A155 ML18022A156 ML18022A157 ML18022A158 ML18022A159 ML18022A161 ML18022A162 ML18022A163 ML18022A164 ML18022A165 ML18022A166 ... further results
References
Download: ML18024A393 (2)

Text

BFN-16 APPENDIX K REACTOR PRESSURE VESSEL DESIGN

SUMMARY

REPORT - UNIT 2 K.1 INTRODUCTION During the general update of the FSAR in 1984, the original Appendices J, K, and L were deleted and replaced with short summaries. These appendices were redocketed June 23, 1989 by the reference letter. Section K.2 is an abbreviated summary of the Unit 2 design and fabrication requirements from the redocketed Appendix K.

K.2 DESIGN AND FABRICATION REQUIREMENTS -

SUMMARY

The Browns Ferry reactor vessel, Unit No. 2, was designed, fabricated, inspected and tested in accordance with the American Society of Mechanical Engineers Boiler and Pressure Vessel Code,Section III Nuclear Vessels, 1965 Edition and Addenda to and including Summer 1965 Addenda, and the following additions:

a. Low alloy steel forgings for pressure parts in accordance with ASTM A-508 Cl. 2 material, Code Case 1332-2.

b. Inconel nozzles in accordance with SB-166 material, Code Case 1336, paragraph 1.

c. Nozzle ends for austenitic pipe and flange ends for low alloy steel nozzles in accordance with SA-105 GR. II material, Code Case 1332-1.

d. Studs, nuts, bushings, and washers in accordance with ASTM A-540, GR. B23 or 24 material, Code Case 1335-2, paragraph 4, Class 3 or 5.

e. Shroud support legs, baffle plate, and ring in accordance with SB-168 annealed material, Code Case 1336.

f. Core spray brackets in accordance with ASTM A-276 TP 304 material, Code Case 1334.

K.0-1

BFN-16 The date of the contract between the Buyer, General Electric Company, Atomic Power Equipment Department, San Jose, California, and the Seller, Babcock and Wilcox Company, Barberton, Ohio, was May 5, 1966. There were no deviations from the Code throughout the design, fabrication, inspection, and testing of the reactor vessels.

REFERENCE TVA Letter from M. J. Ray to U. S. Nuclear Regulatory Commission, Browns Ferry Nuclear Plant, Units 1, 2, 3, Original Final Safety Analysis Report (FSAR) Appendix J, K, and L submittals, June 23, 1989.

K.0-2