ZS-2018-0077, Submittal of ZS-QA-10, Quality Assurance Project Plan, Revision 10
ML18276A086 | |
Person / Time | |
---|---|
Site: | Zion File:ZionSolutions icon.png |
Issue date: | 10/01/2018 |
From: | Gerard van Noordennen ZionSolutions |
To: | Document Control Desk, Office of Nuclear Material Safety and Safeguards |
References | |
ZS-2018-0077, ZS-QA-10, Rev. 9 | |
Download: ML18276A086 (45) | |
Text
. ~
~~~~~~-----~ZIONSOLUTIOlVSi-u--~----------~ An EnergySo/utions Company 10 CFR 50.54(a) 10 CFR 50.71(e) 10 CFR 71.106(b)
October 1, 2018 ZS-2018-0077 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555-0001 Zion Nuclear Power Station, Units 1 and 2 Facility Operating License Nos. DPR-39 and DPR-48 NRC Docket Nos. 50-295 and 50-304
Subject:
Submittal of ZS-QA-10, Quality Assurance Project Plan, Revision 10
Reference:
- 1) Gerard van N oordennen, ZionSolutions, letter to U. s*. Nuclear Regulatory Commission, "Proposed Revision to Quality Assurance Project Plan," dated October 1, 2016.
In accordance with the requirements of 10 CFR 50.54(a)(3), and 10 CFR 71.106(b),
ZionSolutions, LLC is submitting Revision 10 of ZS-QA-10, Quality Assurance Project Plan (QAPP) for the Zion Nudear Power Station (ZNPS). In accordance with 10 CFR 50.71(e)(4),
and 10 CFR 71.106(b), the QAPP update is being submitted within 24 months of the previous QAPP revision 8 submitted in Reference 1.
ZionSolutions concluded that the changes in Revision 9 and Revision 10 of the QAPP, included in this Revision 10 submittal, do not result in a reduction in commitment requiring prior NRC approval.
Attachment 1 contains a summary of the QAPP changes made in Revision 9 and Revision 10.
These represent all changes since the Revision 8 submittal on October 1, 2016. Attachment 2 contains the ZS-QA-10 Quality Assurance Project Plan, Zion Station Restoration Project, Revision 10 (current).
There are no regulatory commitments contained in this letter. If you should have any questions regarding this submittal, please contact me at (860) 462-9707.
Respectfully, Gerard van Noordennen Vice President Regulatory Affairs 101 Shiloh Boulevard, Zion* IL 60099 (224) 789-4016
- Fax: (224) 789-4008
- www.zionsolutionscompany.com
ZionSolutions, LLC ZS-2018-0077 Page 2 of2 Attachments:
- 1) Summary of Changes (ZS-QA-10, Revision 9 and Revision 10)
- 2) ZS-QA-10, Quality Assurance Project Plan (QAPP), Zion Station Restoration Project, Revision 10 cc: John Hickman, U.S. NRC Senior Project Manager Service List
Zion Nuclear Power Station, Unit 1 and 2 License Transfer Service List cc:
Ken Robuck Regional Administrator Group President Disposal and U.S. NRC, Region III Decommissioning 2443 Warrenville Road EnergySolutions Lisle, IL 60532-4352 299 South Main Street, Suite 1700 Salt Lake City, UT 84111 Steven A. Reynolds Manager, Nuclear Facility Inspection John Sauger Division of Nuclear Safety Executive VP & Chief Nuclear Officer Illinois Emergency Management Agency ReactorD &D 245 W. Roosevelt Road, Units 55 & 56 EnergySolutions West Chicago, Illinois 60185 121 W. Trade Street, Suite 2700 Charlotte, NC 28202 Kelly F. Grahn Decommissioning and Field Office Manager Bruce Hinkley Bureau of Radiation Safety General Manager Illinois Emergency Management Agency ZionSolutions, LLC 245 W Roosevelt Road, Building 8, Suite 55 2701 Deborah Avenue West Chicago, IL 60185 Zion, IL 60099 William P. Mazzeno Gerard van N oordennen Emergency Management Coordinator VP Regulatory Affairs Lake County Emergency Management EnergySolutions Agency 121 W. Trade Street, Suite 2700 1303 N. Milwaukee Avenue Charlotte, NC 28202 Libertyville, IL 60048-1308 Jerry Houff John E. Matthews Decommissioning Plant Manager Morgan, Lewis & Bockius LLP ZionSolutions, LLC 1111 Pennsylvania A venue, NW 2701 Deborah Avenue Washington, DC 20004 Zion, IL 60099 Russ Workman General Counsel EnergySolutions 299 South Main Street, Suite 1700 Salt Lake City, UT 84111 Regional Administrator
ZionSolutions, LLC ZS-2018-0077: Attachment 1 Page 1 of 3 Summary of Changes ZS-QA-10, Revision 9:
Change No 1:
The Executive Vice President - Chief Nuclear Officer (EVP-CNO) position was added to the Table of Contents, Section 2.4, and Figure 1. This in tum resulted in adjustments to the General Manager (GM) and Decommissioning Plant Manager (DPM) responsibilities in Sections 2.1.1, 2.2.1 (b ), 2.5 and 2.11. In the aggregate, no responsibilities were eliminated or reduced, and.the independence of persons and organizations performing quality assurance functions from cost and schedule was not affected.
Basis of concluding no reduction in commitment:
This change can be characterized as "Organizational revisions that ensure that persons and organizations performing quality assurance functions continue to have the requisite authority and organizational freedom, including sufficient independence from cost and schedule when opposed to safety considerations." under 10 CFR 50.54(a)(3)(vi), and does not represent a reduction in commitment requiring prior NRC approval.
Change No 2:
The NOTE following Section 2.0 and Figure 1 were revised to clarify that in addition to Generic Titles, the QAPP uses a simplified reporting structure that may not include intermediate reporting relationships Basis of concluding no reduction in commitment:
This change can be characterized as "The use of generic organizational charts to indicate functional relationships, authorities, and responsibilities ... " under 10 CFR 50.54(a)(3)(iv), and does not represent a reduction in commitment requiring prior NRC approval.
ZS-QA-10, Revision 10:
Changes No. 1 and 2:
Change Page Section Change Summary Currently the EVP-CNO and GM are two separate Cover 1 1 individuals. This necessitated separating the two signature page signatures on the cover.
Statement of .Combined President and CEO title to align with 2 2 Policy corporate organization change.
Currently the EVP-CNO and GM are two separate individuals. In QAPP rev. 10, this necessitated separating the two signatures on the cover. The President and CEO titles were combined in a June 2018 corporate organization change. In QAPP rev. 10, the titles are combined on the "Statement of Quality Assurance Policy" page.
ZionSolutions, LLC ZS-2018-0077: Attachment 1 Page 2 of3 Basis of concluding no reduction in commitment:
In the aggregate, no responsibilities were eliminated or reduced, and the independence of persons and organizations performing quality assurance functions from cost and schedule was not affected. These changes can be characterized as "Organizational revisions that ensure that persons and organizations performing quality assurance functions continue to have the requisite authority and organizational freedom, including sufficient independence from cost and schedule
- when opposed to safety considerations." under 10 CFR 50.54(a)(3)(vi), and does not represent a reduction in commitment requiring prior NRC approval. '
Changes No. 3 through 10:
Change Page Section Change Summary Removed reference to liquid effluents, and instrument
~ppendix B-alarm and trip setpoints with the termination of liquid 3 34 Administrative discharges and the decommissioning of the WWTF &
5.6.1.a Liquid Radwaste Monitor (PR04).
Appendix B-Removed reference to liquid effluents and setpoint 4 35 Administrative determination with removal of both.
5.6.2.a Appendix B-Deleted 5.6.2.b removing reference to liquid effluents and 5 35 Administrative concentration limits with termination ofliquid discharges.
5.6.2.b Appendix B-Removed reference to liquid effluents with removal of 6 35 Administrative liquid discharges.
5.6.2.c Appendix B- Deleted 5.6.2.d removing reference to liquid effluents and 7 35 Administrative dose commitment/limits with termination ofliquid 5.6.2.d discharges.
Deleted 5.6.2.f which discussed liquid and gaseous Appendix B- treatment system~ which no longer exist or are necessary at 8 35 Administrative this final stage of decommissioning with the significantly 5.6.2.f reduced source term on site and effluent and dose results back to 2016.
Appendix B- Removed reference to "each unit" as these no longer exist -
9 36 Administrative releases are from the construction site and no longer from 5.6.2.h individual reactor units.
Appendix B - .
10 37 Administrative Removed reference to liquid effluents.
5.7.3
ZionSolutions, LLC ZS-2018-0077: Attachment 1 Page 3 of3 Basis of concluding no reduction in commitment:
The July 2018 revision to the Zion Station Decommissioning Safety Analysis Report (DSAR) was subjected to 10 CPR 50.59 assessment. Rev. 11 to the Zion Station Off-Site Dose Calculation Manual (ODCM) was subjected the Qualified Technical Review process. These two
- changes eliminated liquid effluent processing and discharge SSCs and processes no longer applicable to the Zion site. The QAPP rev. 10 changes 3 through 10 are administrative housekeeping, to remove these no longer applicable SSCs and processes.
ATTACHMENT 2 Zion Station Restoration Project ZS-QA-10 Quality Assurance Project Plan, Revision 10
' .~,.' '.
'* I!
,**(***:
- ~
ZlONSiJLti!i'IOivSic
. . :\:; >;*. :::,_,;,<,~*~~~.~iii.*/,';*;, . **
i**
dualitY
~ - '.
ASsuranCe Proj8Ctf>1an ' ' ' * * ! *
- Zi:oriS0/utio.i1s .;L.:Lc:
- i.i~n *$tati()~ Re,ti>r~tlbn Pf<>.ject
' c. ** * . ' * ' . . . . ' , ;\ ; *
- Aevision*-to*
.Author:
.,.*.*.*.~~*~
AM:Q.Y$t.l6, :2Qt8 -
- . *. o~Appre>va1;*
- ... Jo~rf$*,. ;e ~:Ex~c°'ev1ce~P.~s1~enfan~'eli1et~uc1ear~Offl.~if* o~ie**
r
ZS-QA-10 Revision 10 Information Use ZiONSOLUTIONS LLC ZION STATION RESTORATION PROJECT STATEMENT OF QUALITY ASSURANCE POLICY This Quality Assurance Project Plan JQAPP) defines the ZionSo!utions LLC Quality Assurance Program to be implemented during the Zion Stati_on Restoration Project at the Zion Nuclear Power Station (ZNPS) site. This QAPP is designed to meet the requirements. of Title 1a.of the Code of Federal Regula_tions, Part 50 Appendix B, "Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants,"
Part 71, Subpc1rt H, "Quality Assurance Requirements for Packaging and Transportation of Radioactive Waste" and Part 72, Subpart G, "Quality Assurance Requirements for the Independent Storage of Spent Nuclear Fuel, High Level Radioac:::tive Waste, and .
Reactor-Related Greater Than Clas~ C Waste."
- Implementation of the requirements of the QAPP are done in a graded approach commensurate with an item or activities importance to s~fety. This graded approach is responsive to NRC Regulatory Guide 7.10.
The QA Manager has been delegated the authority to implement and revise the provisions of this QAPP, and to regularly c1ssess the scope; status, implementation and
- effectiveness of this QAPP.
The QAPP applies to all activities associated with structures, systems, and components (SSCs) which are important to safety (10 CFR 72). The QAPP also applies to transportation packages licensed by the NRC under 10 CFR 71. The applicability of the requirements of the QAPP to other items and activities is determined on a case-by-case basis.
2
ZS-QA-10 Revision 10 Information Use TABLE OF CONTENTS Page
1.0 INTRODUCTION
5 1.1 Project Quality Assurance Program 5 1.2 Scope 6 2.0 QUALITY RESPONSIBILITIES 7 2.1 Responsibility 7 2.2 Organization 7 2.3 President . 8 2.4 Executive Vice President- Chief Nuclear Officer 8 2.5 General Manager 8 2.6 Licensing Manager 8 2.7 Quality Assurance Manager 8 2.8 Training Manager 9 2.9 Engine,ering Manager 9 2.10 ISFSI Manager 9 2.11 Decommissioning Plant Manager 9 2.12 Radiation Protection Manager 9 3.0 QUALITY ASSURANCE REQUIREMENTS 10 3.1 Organization 10 3.2 QAProgram 10 3.3 Design Control 13 3.4 Procurement Document Control 15 3.5 Instructions, Procedures and Drawings 16 3.6 Document Control 16 3.7 Control of Purchased Material, Equipment and Services 17 3.8 Identification* and Control of Materials, Parts and Components 19 3.9 Control of Special Processes 19 3.10 Inspection 19 3.11 Test Control 21 3.12 Control of Measuring and Test Equipment 21 3.13 Handling, Storage and Shipping 22 3.14 Inspection, Test, and Operating Status 23 3.15 Nonconforming Materials, Parts or Components 23 3.16 Corrective Action 24 3.17 Quality Assurance Records 25 3.18 Audits 28 3
ZS-QA-10 Revision 10 Information Use TABLE OF CONTENTS
4.0 REFERENCES
30
- FIGURES Figure 1 ZionSolutions Organization Chart 31 APPENDICES Appendix A
- Important-To-Safety Structures, Systems and Components 32 Appendix B Administrative Controls 34 4
ZS-QA-10 Revision 10 Information Use 1.0 Introduction The Zion Nuclear Power Station (ZNPS) located in Zion, Illinois, prior to September 1, 2010, was being maintained in a SAFSTOR condition by Exelon Corporation.
Effective September 1, 2010, Energy Solutions entered into an agreement with Exelon under which ZionSo/utions, a wholly-owned subsidiary of EnergySolutions, assumed ownership of the facility, took possession of the licenses, and has undertaken decommissioning activities, conducted by EnergySolutions and affiliated companies.
The nuclear fuel stored in the Spent Fuel Pool (SFP) was placed in Dry Cask Storage (DCS) casks and stored in an Independent Spent Fuel Storage Installation (ISFSI), a secured storage pad on the ZNPS site. The ISFSI is also being used to store Greater than Class C (GTCC) waste.
1.1 Project Quality Assurance Program The Quality Assurance Project Plan (QAPP) provides a consolidated overview of the quality program controls which govern the decommissioning of the Zion Nuclear Plant and operation and maintenance of the Independent Spent Fuel Storage Installation (ISFSI).
The QAPP describes the quality assurance organizational structure, functional responsibilities, levels of authority and interfaces. QA programmatic requirements within this QAPP are based on, and meet, all applicable quality assurance requirements stipulated in 10 CFR 50, Appendix B, 10 CFR 71, Subpart H, and 10 CFR 72, Subpart G. In addition, the guidance in NRG Regulatory Guide 7.10 has been incorporated.
The ZionSo/utions QAPP is considered a QA Project Plan under the EnergySolutions QA Program (QAP). The EnergySolutions QAP commits to the requirements of 10 CFR 50, Appendix B, 10CFR71, Subpart H, 10CFR72, Subpart G, and ANSI/ASME NQA-1.
The QAPP is implemented through the use of approved procedures (i.e., policies, directives, procedures, manuals, instructions, or other documents) which provide written guidance for the control of important to safety items and activities and provides for the development of documentation to demonstrate objective evidence of compliance with stated requirements.
5
ZS-QA-10 Revision 10 Information Use 1.2 Scope The QAPP applies to all activities associated with structures, systems, and components (SSCs) which are important to safety (10 CFR 72) as listed in Appendix A of this QAPP.
The QAPP also applies to transportation packages licensed by the NRC under 10 CFR 71.
The QAPP applies to decommissioning activities (10 CFR 50, Appendix B) in a graded approach commensurate with an item or activities importance to safety, as stipulated below:
- Applicable portions of Sections 3.1, 3.2, 3.16, 3.17 and 3.18 of this QAPP apply to decommissioning activities.
- Appendix B of this QAPP applies to decommissioning activities.
The applicability of the requirements of the QAPP may be extended to other activities as designated by the General Manager. Decommissioning activities are otherwise controlled by procedures, processes and policies deemed adequate by the management responsible for the successful completion of those activities.
6
ZS-QA-10 Revision 10 Information Use 2.0 QUALITY RESPONSIBILITIES This section defines the responsibilities of key project members accountable for implementation of the QAPP. Functions and actions can be delegated; however, the responsibility remains with the designated individual.
Note: This QAPP uses Generic Titles, and simplified reporting structure.
Alignment between these Generic Titles and actual titles, and between the simplified reporting structure and actual reporting structure, are maintained current in approved company documents. Actual reporting structure may include intermediate positions not shown on the QAPP organization chart; however, the responsibilities remain as shown on the QAPP organization chart.
2.1 Responsibility 2.1.1 The General Manager (GM) shall be responsible for overall plant operations and shall delegate in writing the succession to this responsibility during his absence. The GM or designee shall approve, prior to implementation, each proposed test, experiment, or modification to systems or equipment that affect the safe storage of nuclear fuel.
2.2 Organization 2.2.1 General Organizational Requirements - Onsite and offsite organizations shall be established for station and corporate management, respectively. The onsite and offsite organizations shall include the positions for activities affecting the safe storage of nuclear fuel.
- a. Lines of authority, responsibility, and communication shall be established and defined for the highest management levels through intermediate levels to and including all operating organization positions. These relationships shall be documented and updated, as appropriate, in the form of organization charts, functional descriptions of departmental responsibilities and relationships, and job descriptions for key personnel positions, or in equivalent forms of documentation.
- b. The GM shall be responsible for overall plant safety and shall have control over those on site activities necessary for safe storage of nuclear fuel.
- c. The President, Zion Solutions, shall have corporate responsibility for the safe storage of nuclear fuel and shall take any measures needed to ensure acceptable performance of the staff in operating, maintaining, and providing technical support to the plant to ensure the safe storage of nuclear fuel.
- d. The individuals who carry out health physics and quality assurance functions may report to an appropriate onsite manager; however, they 7
ZS-QA-10 Revision 10 Information Use shall have sufficient organizational freedom to ensure their ability to perform their assigned functions.
2.3 President, ZionSolutions The President manages the operation of EnergySo/utions stewardship projects at U.S.
Reactor sites, and assures that the ZionSo/utions project receives timely and effective support from EnergySo/utions corporate groups. The President meets periodically with the GM and other key managers to review the operation of the Zion ISFSI and of decommissioning and to address project management, quality, and related issues.
2.4 Executive Vice President - Chief Nuclear Officer (EVP-CNO) ZionSolutions This executive provides direct oversight of the project, and other selected tasks, to ensure the project is properly planned, staffed and executed. The EVP-CNO has overall authority and responsibility for the establishment and effective implementation of the QAPP. The EVP-CNO has periodic meetings with the management team to review plans and progress and to address stakeholder, quality, and project management issues.
2.5 General Manager (GM) ZionSo/utions The GM has overall responsibility for all decommissioning activities, including fire protection and industrial safety activities at the decommissioning site. The GM shall have authority over those on site activities necessary for safe storage of nuclear fuel.
The GM retains authority for each proposed test, experiment, or modification to systems or equipment that affect the safe storage of nuclear fuel. The GM delegates to the management team the day-to-day responsibilities for the ISFSI and decommissioning by approved documents, respectively.
2.6 Licensing Manager (LM)
The LM is responsible for the day-to-day licensing activities, interfaces with the Nuclear Regulatory Commission (NRC) and Exelon, and is the Single Point of Contact for licensing and regulatory matters and concerns. The LM is responsible for assessing QAPP changes for determining compliance with licensing basis requirements, and for managing submittals to the NRC.
- 2. 7 Quality Assurance Manager (QAM)
The QAM reports to the GM, and has access to the EnergySolutions Corporate QA Director for quality matters. The QAM is responsible for establishing and maintaining the QAPP, monitoring the project's quality objectives through overview and inspection activities, and providing feedback to management on the effectiveness of the QAPP.
8
ZS-QA-10 Revision 10 Information Use The QAM evaluates, accepts, and performs oversight of supplier and subcontractor Quality Assurance Programs.
The QAM provides orientation and training on applicable quality requirements to the ZionSolutions organization. The QAM periodically provides reports on project quality activities to the GM, and the management team.
2.8 Training Manager (TM)
The TM is responsible for overview and management of the project training program.
The TM shall periodically evaluate and report the status of the training program and effectiveness of the training process to the GM.
2.9 Engineering Manager (EM)
The EM is responsible for the engineering of ISFSI and decommissioning activities, and ensuring adequate technical review is applied to changes, tests and experiments.
2.10 ISFSI Manager (IM)
The IM is responsible for overseeing all ISFSI activities, including Security Plan and Emergency Plan activities for the ISFSI.
2.11 Decommissioning Plant Manager (DPM)
The DPM is responsible for implementing decommissioning operations activities, including fire protection activities and industrial safety activities, for the entire decommissioning site. The DPM is also responsible for the functions described in Appendix B of this QAPP.
2.12 Radiation Protection Manager (RPM)
The RPM is responsible for all radiation protection, environmental protection, site closure, and waste shipping activities at the entire site.
9
ZS-QA-10 Revision 10 Information Use 3.0 QUALITY ASSURANCE REQUIREMENTS 3.1 Organization The Zion Restoration Project organization, authority, duties, responsibilities, and interface requirements are addressed in QAPP Section 2.0, Quality Responsibilities.
These activities include performing activities affecting the functions of structures, systems, and components which are important to safety, those associi;lted with attaining quality objectives, and the QA functions.
The QAM position shall be responsible for verifying the proper establishment and effective execution of the QAPP and shall have no assigned responsibilities that would preclude appropriate attention to Quality Assurance matters.
Quality Assurance staff shall have sufficient independence from cost and schedule considerations and shall have the access to work areas and organizational freedom to effectively identify quality problems, initiate, recommend or provide solution to quality problems through designated channels, verify implementation of solutions; and assure that further processing, delivery, installation, and use are controlled until proper disposition of a nonconformance, deficiency, or unsatisfactory condition has occurred.
The QAM has the authority to stop work when significant conditions adverse to quality warrant such action.
In the case where differences of opinion involving the QAPP requirements exist, they shall be brought to the attention of the GM for resolution. If necessary, the QAM also has the ability to elevate the item to the Corporate QA Director for resolution.
The responsibility for achieving and maintaining quality resides with those performing the work. Personnel or organizations not directly responsible for performance of the work can verify quality achievement of that work.
3.2 QA Program The Zion Solutions Quality Assurance Project Plan (QAPP) consists of those planned and systematic actions necessary to assure that activities will be conducted in a satisfactory manner and that equipment and material will perform satisfactorily in service. The system is based on the concept that work performance is a process that can be planned, executed, assessed, and improved. Management is responsible for these ongoing activities. Since all work is accomplished using people, equipment, and procedures as directed by management, management is responsible for fostering an attitude of support and encouraging personnel to complete their work in a quality manner. All employees are responsible for identifying non-compliant work or areas for improvement. Management is responsible for identifying (both internal and external) project needs and expectations. Meeting these needs and expectations is a measure of quality and success. *
- 10
ZS-QA-10 Revision 10 Information Use 3.2.1 QAPP Application Procedures describe how ZionSolutions implements the requirements of the QAPP. These procedures document methods for planning, reviewing, implementing, controlling, and verifying that activities subject to this QAPP are performed in accordance with the applicable requirements from these documents:
- 10CFRSO, Appendix B
- 10CFR71, Subpart H
- 10CFR72, Subpart G
- NRC Regulatory Guide 7.10 3.2.2 Quality Achievement, Management, and Verification The achievement of quality is the responsibility of all employees and is led by management. The QAPP provides for a systematic approach at various levels for oversight and assessment to assure the adequacy and effectiveness of implementation of the QAPP and implementing procedures.
A tiered approach to verification and assessment includes self-checking by the individuals performing the work, supervision and oversight by management, independent inspection, and surveillance and verification to confirm adequacy and effectiveness of results. Managers are required to assess the effectiveness of their own operations and implementation of their portion of the QAPP. QA personnel perform independent audits, surveillances, and inspections as necessary to verify the effectiveness of the QAPP.
3.2.3 Personnel Qualification and Certification 3.2.3.1 Training and Indoctrination The requirements and responsibilities established for the project Team ensure that management assess their organizations' training needs and assure that all personnel performing activities affecting quality are indoctrinated, trained, and qualified according to their level of responsibility and assigned functions. This includes training on appropriate procedures, processes and policies and any special skill training required for the performance of job activities.
Qualification is completed prior to performing work, unless qualification is based upon demonstration of job skills under the supervision of a qualified person. The extent of such training is commensurate with the scope, nature, and complexity of the activity, as well as the education, experience, and abilities of the 11
ZS-QA-10 Revision 10 Information Use individual. Training scopes, objectives, and methods of implementation are included in approved procedures.
Indoctrination and training are conducted as necessary to assure suitable proficiency is achieved and maintained. Project personnel shall be trained in the applicable procedures and project-specific documents.
3.2.3.2 Inspection and Test Personnel Inspection and test personnel have experience commensurate with the scope of work and the complexity of the activity and are selected and trained in accordance with approved procedures. The job performance of inspection and test personnel is reevaluated at periodic intervals not to exceed three (3) years. Certification or qualifications that are revoked for deficient job performance will result in the reevaluation of items inspected or tested by the individual.
Personnel performing nondestructive examinations are qualified in accordance with the American Society of Nondestructive Testing recommended practice, or as otherwise commensurate with the NDE requirements.
Certification documentation shall be maintained in accordance with approved procedures.
3.2.3.3 Lead Auditors and Inspectors Quality Assurance (QA) Lead Auditors are qualified and certified by ZionSolutions or by approved suppliers. Lead Auditors are qualified in accordance with established procedures, and records are maintained. Proficiency evaluations are performed annually and documented for individuals performing audit activities and appropriate certification renewal or re-qualification actions are taken.
Personnel performing inspection activities are qualified and certified in accordance with established procedures.
Auditor and Inspector certification documentation shall be maintained in accordance with approved procedures.
12
ZS-QA-10 Revision 10 Information Use 3.2.4 Independent Management Assessment Independent Management Assessments are periodically performed to monitor overall performance and confirm that activities affecting quality comply with the QAPP and that the QAPP is effectively implemented. Independent Management Assessment is performed by individual(s) designated by the President, independent of activities assessed and who provide the appropriate level of expertise in the activities assessed. The Independent Management Assessment results are communicated in an understandable form and in a timely fashion to a level of management having the authority to effect corrective action. In addition, these results are reported in a timely fashion to the GM.
3.3 Design Control Design Control procedures ensure that the design meets applicable regulatory requirements, and that design activities are carried out in a planned and controlled manner. Procedures describe responsibilities for design interface, control, verification, and change. Approved procedures govern translation of applicable project and regulatory requirements and design bases into design, procurement, and procedural documents, as well as controlling the design documents and design document distribution.
These design controls are intended to apply to those ISFSI or site SSCs that may impact the important-to safety SSCs at the ISFSI.
3.3.1 Design Control Program The program will ensure that the activities associated with the design of structures, systems and components and modifications thereto, are executed in a planned, controlled, and orderly manner.
The program utilizes the guidance of NUREG/CR-6407 to classify structures, systems and components such that appropriate quality requirements are identified and documented on drawings, component lists, or procurement documents, as applicable.
The program includes provisions to control design inputs, processes, outputs, changes, interfaces, records, and organizational interfaces.
Design inputs (e.g., performance, conditions of the facility license, quality, and quality verification requirements) shall be correctly translated into design outputs (e.g., specifications, drawings, procedures, and instructions).
The final design output shall relate to the design input in sufficient detail to permit verification.
13
ZS-QA-10 Revision 10 Information Use The design process shall ensure that materials, parts, equipment and processes ar~ selected and independently verified consistent with their importance to safety to ensure they are suitable for their intended application.
Changes to final designs (including field changes and modifications) and dispositions of non-conforming items to either use-as-is or repair shall be subjected to design control measures commensurate with those applied to the original design and approved by the organization that performed the original design or a qualified designee.
Interface controls (internal and external between participating design organizations and across technical disciplines) for the purpose of developing, reviewing, approving, releasing, distributing, and revising design inputs and outputs shall be defined in procedures.
Design documentation and records, which provide evidence that the design and design verification process was performed in accordance with the QAPP, shall
- be collected, stored, and maintained in accordance with documented procedures. This documentation includes final design documents, such as drawings, and specifications, and revisions thereto and documentation which identifies the important steps, including sources of design inputs that support the final design.
3.3.2 Design Verification The program will verify the acceptability of design activities and documents for the design of items. The selection and incorporation of design inputs and processes, outputs and changes are verified.
Verification methods include, but are not limited to, design reviews, alternative calculations, and qualification testing. The extent of this verification will be a function of the importance to safety of the item, the complexity of the design, the degree of standardization, the state of the art, and the similarity with previously proven designs. Standardized or previously proven designs will be reviewed for applicability prior to use.
When a test program is used to verify the acceptability of a specific design feature, the test program will demonstrate acceptable performance under conditions that simulate the most adverse design conditions that are expected to be encountered.
Independent design verification is to be completed before design outputs are used by other organizations for design work and before they are used to support other activities such as procurement, manufacture, or construction. When this timing cannot be achieved, the unverified portion of the design is to be identified 14 i
ZS-QA-10 Revision 10 Information Use and controlled. In all cases, the design verification is to be completed before relying on the item to perform its Important to safety function.
Individuals or groups responsible for design reviews or other verification activities shall be identified in procedures and their authority and responsibility shall be defined and controlled. Design verification shall be performed by any competent individuals or groups other than those who performed the original design but who may be from the same organization. The designer's immediate supervisor or manager may perform the design verification provided:
- 1. The supervisor or manager is the only technically qualified individual capable of performing the verification.
- 2. The need is individually documented and approved in advance by the
- supervisor's or managers management, and
- 3. The frequency and effectiveness of the supervisors or managers use as a design verifier is independently verified to guard against abuse.
Design verification procedures are to be established and implemented to ensure that an appropriate verification method is used, the appropriate design parameters to be verified are chosen, the acceptance criteria is identified, the verification is satisfactorily accomplished and the results are properly recorded.
3.4 Procurement Document Control Controls for procured items and services are established in approved programs and procedures. These programs and procedures require the technical, quality, regulatory, and administrative requirements applicable to the procurement to be specified in procurement documents. To the extent necessary, procurement documents require suppliers to adequately implement a quality program consistent with the type and use of the item or service being purchased.
Management is responsible for supplying personnel to perform the procurement process and ensuring that project-specific requirements for procurement documents are documented.
Procurement documents shall include the following as applicable: the scope of work; technical and regulatory requirements; quality criteria for items and services; quality requirements for suppliers and sub-tier suppliers; documentation requirements; quality record maintenance and retention; right of access for audit or inspection; requirements for reporting and approving supplier generated nonconformance's; and identification of spare and replacement parts.
15
ZS-QA-10 Revision 10 Information Use Technical, safety, and quality personnel who have an understanding of the requirements and intent of the procurement, shall review the procurement documents.
Procurement documents are reviewed, approved, and documented prior to award.
QA shall review all Important to Safety (ITS) procurements for the appropriate Quality Assurance requirements prior to issuance.
Changes to procurement documents receive the same level of review and approval as the original.
- 3.5 Instructions, Procedures and Drawings Management is responsible for ensuring that ITS activities are described in instructions, procedures, or drawings, which are prepared and approved prior to commencing
- activities. All project personnel are responsible to perform their activities in accordance with the requirements of these documents. These documents include appropriate quantitative and qualitative acceptance criteria to verify that the activity has been satisfactorily accomplished.
Management is responsible for maintaining these documents current to reflect actual work practice. Instructions, procedures, work instructions and drawings are prepared, reviewed, issued, and controlled in accordance with approved procedures.
3.6 Document Control The Document Control System ensures that all documents are properly identified, distributed, and retained as specified in approved procedures. Documents are reviewed for adequacy and approved for release by authorized personnel prior to issuance.
Documents are issued to and used at the location where the activity is performed as specified in project procedures. Document changes are reviewed and approved in accordance with project procedures. Project documents, including changes, shall be identified, prepared, reviewed, approved, maintained, revised, and controlled in accordance with the requirements of this QAPP.
Documents will be controlled based upon their revision date and specific project distribution lists. Management is responsible for assigning personnel to originate and process project documents, for review and approval, and assure that correct documents are being used.
Management is responsible for identifying documents to be controlled and for their distribution. Controls are established in approved procedures that define responsibility, authority, issue, use, and revision of controlled documents. Management ensures that documents are reviewed for adequacy, completeness, and correctness prior to issue.
16
ZS-QA-10 Revision 10 Information Use Document changes are reviewed and approved in accordance with project procedures.
Minor changes such as inconsequential editorial corrections do not require the same review cycle as the original document. Approved procedures define the types of changes considered minor and the persons who are permitted to make these changes.
- 3. 7 Control of Purchased Materials, Equipment and Services ZionSo/utions procurement controls establish measures to ensure those procured items and services for ITS applications are clearly and adequately specified in procurement documents. Items and services are provided by suppliers and subcontractors who are capable of producing items and furnishing services that conform to procurement document requirements. These procurement methods are controlled by procedures for supplier evaluation, review of procurement requirements, and audit/surveillance of supplier's facilities.
Commercial grade items may be procured and dedicated for ITS applications. Qualified project personnel shall identify the critical characteristics and the method(s) (e.g.,
special tests and inspections, commercial supplier survey, source verification, and/or acceptable supplier/item performance record) to be used to dedicate commercial grade items. Dedication of commercial grade items shall be accomplished in accordance with approved procedures.
3.7.1 Supplier Evaluation Project technical, procurement, and QA personnel participate, as appropriate, in evaluation of potential procurement sources for ITS-A / ITS-8. Supplier evaluations include elements of the QA Program applicable to the purchased item or services.
Once selected, QA shali evaluate the supplier and if acceptable, add the supplier to the ZionSo/utions approved supplier list. In addition, documented evaluation is required annually for suppliers maintained on the supplier list.
Supplier audits, when required, shall be conducted at least once every thirty-six (36) months in accordance with the audit section of this document. A third party review of an audit performed or accepted by EnergySolutions may be performed to add the supplier to the list. This review shall be documented.
3.7.2 Procurement Requirements Requirements to be met by the supplier are detailed in the procurement documents, which may include procurement specifications. Procurement specifications detail the supplier QA requirements such as inspection reports, provisions for inspection, equipment calibration prior to use, and provisions for inspection after component repair.
17
ZS-QA-10 Revision 10 Information Use 3.7.3 Supplier Surveillance QA is responsible for conducting and documenting supplier surveillance activities. Surveillance activities may include:
- Witnessing tests, inspections, nondestructive examinations, and various
- special process operations.
- Monitoring heat treatment, welding, cleaning, preserving, and packaging activities.
- Verifying material identification and traceability control.
- Verifying control and calibration of measuring and test equipment.
Documentation packages for purchased items, if required, are reviewed by QA or their qualified designee prior to*release of the items for use. This documentation may include material test reports, inspection and test reports, NOE reports, and applicable code data reports.
3.7.4 Receiving Inspection Receiving inspection shall be performed for purchased items that are ITS (including spare or replacement parts) to ensure that:
- Items are properly identified and correspond to the receiving documentation.
- Inspection records and certificates of conformance attesting to the acceptance of the items are available.
- Items accepted and released are identified as to their inspection status prior to forwarding them to a controlled storage area or releasing them for installation or further work.
- Physical attributes comply with specified requirements.
Records of such inspections and documentary evidence that material, equipment, and services conform to procurement specifications and documents shall be retained or be available prior to installation or use of the item, material, equipment or service, for the life of the package, and for the life of the ITS SSC as applicable. Nonconforming conditions or discrepancies identified during a receipt inspection shall be documented or, Condition Report (CR).
When used, post installation test requirements and acceptance criteria shall be established with input from the supplier, if appropriate.
18
ZS-QA-10 Revision 10 Information Use The controls used for procuring items or services include the requirement that the suppliers/subcontractors are required to implement their QA Program that meets the applicable requirements of this QAPP for the requested item or service for important-to-safety category A and B. These supplier/subcontractor QA programs must be reviewed and accepted by ZionSo/utions QA prior to use including technical and quality assurance program changes that result from bid evaluations or negotiations.
Subcontractors will be evaluated to pre-established technical and quality assurance requirements.
- 3. 7.5 Use of Commercial Grade Calibration and Testing Services Suppliers providing commercial grade calibration and testing services who are accredited by a nationally recognized accrediting body, as described in Nuclear Energy Institute (NEI) 14-05 guidelines, may be used without additional qualification, provided the conditions of the associated NRC Safety Evaluation are met. Controls shall be established in applicable procedures to ensure the requirements of the NRC Safety Evaluation are satisfied prior to acceptance.
3.8 Identification and Control of Materials, Parts and Components Controls are established in approved procedures to assure that only correct and accepted items are used or installed. Identification is maintained either on the items or in documents traceable to the item. Identification of each item is maintained throughout fabrication, shipping and handling, erection, installation, and use so that the item can be traced to its documentation. Traceability is maintained to an extent consistent with the item's importance to safety.
3.9 Control of Special Processes Special processes that control or verify quality are performed by qualified personnel using qualified procedures. Personnel, equipment, and procedures used to perform special processes are qualified in accordance with specified requirements. Qualified procedures for special processes include required conditions such as proper equipment, controlled parameters, and calibration requirements. Documentation of personnel, equipment, and process qualifications is maintained in accordance with procedures.
3.10 Inspection Quality Assurance, engineering, and technical support personnel are responsible for ensuring that inspections required to verify conformance of an item or activity to specified requirements are planned, executed, and documented by qualified personnel according to approved procedures.
19
ZS-QA-10 Revision 10 Information Use Equipment modifications, repairs, and replacement are inspected in accordance with the original design and inspection requirements unless an approved alternative exists.
3.10.1 Personnel Inspection personnel are independent of those who performed the work being inspected. Personnel who verify conformance of work for acceptance are qualified to perform the inspection in accordance with approved procedures. Personnel in training for qualification as an inspector by on-the-job training are directly supervised by a qualified person who verifies the inspection results until qualification is achieved.
3.10.2 Inspection Hold Points Responsibilities for identifying and specifying hold points are established in
- approved procedures. Quality Assurance, Engineering / technical support representatives are responsible for identifying inspection hold points in appropriate documents to ensure that no further work is performed until a certain inspection has been completed. Work does not proceed beyond hold points without consent from the organization that established them.
This consent is recorded prior to continuation of work.
3.10.3 Inspection Planning Inspection procedures, instructions, or checklists identify the characteristics and activities to be inspected:
- acceptance criteria;
- responsible organization for performing inspection;
- and, provide for recording objective evidence of inspection results.
Planning also includes identification of hold or witness points;
- approval of data by supervisors to ensure that all inspection prerequisites and requirements have been.satisfied, including operator and equipment qualifications;
- and, if applicable, establishment of sampling methods based on recognized standard practices, in accordance with approved procedures or project plans.
3.10.4 Inspection Records Inspection records contain, at a minimum, identification of the item inspected, date of inspection, inspector name, type of observation, 20
ZS-QA-10 Revision 10 Information Use acceptance and rejection criteria, results or acceptability, and reference to nonconformances.
- 3.11 Test Control Testing to verify conformance of processes, equipment, and products to specified requirements and to demonstrate satisfactory performance is planned and performed by qualified personnel in accordance with approved procedures. Tests required to collect data are planned, executed, documented, and evaluated.
3.11.1 Test Requirements Engineering / technical support representatives are responsible to ensure that test requirements and acceptance criteria are developed and incorporated into appropriate test plans, procedures, or checklists. The test methods and acceptance criteria are based on specified requirements contained in design or other technical documents. As appropriate, test plans are established, procedures developed, and results documented on checklists or other suitable records.
Modification, repairs, or replacements shall be in accordance with the original design and test requirements or acceptable alternatives approved in the same, or equivalent, manner as the original.
3.11.2 Test Results Test results are documented and evaluated by a responsible authority to assure the test requirements were satisfied. Records include as a minimum the item tested, date of test, name of the tester, environmental conditions, observations, acceptance and rejection criteria, results and acceptability, action taken for deviations noted, and name of the person evaluating results.
3.12 Control of Measuring and Test Equipment Measuring and Test Equipment (M&TE) used for important-to-safety activities is controlled to ensure accuracy. The calibration process assures that all measuring instruments used in the acceptance of material, equipment, and assemblies are calibrated and properly adjusted at specified intervals to maintain accuracy within pre-determined limits. Engineering / technical support representatives specify the devices to be controlled, the controlling and calibration methods, and calibration intervals to maintain accuracy within the necessary limits.
Management is responsible for selecting the appropriate type, range, accuracy, and tolerance of M&TE to verify conformance to specified requirements.
21
ZS-QA-10 Revision 10 Information Use M&TE is calibrated, adjusted, and maintained at scheduled intervals against certified equipment or standards having known valid relationships to nationally recognized standards, derived from accepted values for natural physical constants or by the ratio type of self-calibration. If no national standard exits, the basis of calibration is documented. The method and interval of calibration for each item is based on the type of device, stability characteristics, required accuracy, purpose, frequency of usage, and environment where it will be used.
Calibration methods are documented and performed by competent personnel in an environment that does not adversely affect the calibration. Special controls for usage, handling, and storage are documented and applied when they are required for environmental conditions such as temperature, humidity, cleanliness, or radiation to maintain accuracy or operating characteristics of the device.
When M&TE is found out of calibration, previous test results back to the previous acceptable calibration date are validated. Out-of-calibration devices are tagged or segregated until repaired and recalibrated or replaced.
Record of calibration history is maintained and equipment is marked to indicate calibration status. Documentation includes the equipment identification number, next calibration due date, the inspector's or calibrator's signature or initials attesting to the accuracy and validity of the calibration, and the location or work/test activity where the equipment has been used for acceptance.
3~ 13 Handling, Storage and Shipping Materials considered critical, sensitive, perishable, or QA designated are handled, cleaned, stored, packaged, and shipped in accordance with controls identified in codes, standards, regulations, engineering specifications, or project requirements to prevent damage or loss and to minimize deterioration.
3.13.1 Requirements Handling, storage, and shipping processes are conducted in accordance with written procedures, inspection instructions, drawings, specifications, vendor recommendations, or other documents, as appropriate. Information pertaining to shelf life, environment, packaging, temperature, cleaning, preservation, etc., is included, as required, to meet design, regulatory, and project requirements.
When necessary for particular products, special protective environments, such as inert gas atmosphere, and specific moisture content and temperature levels, are specified and provided in applicable documents.
The use of special handling equipment or techniques is addressed in procedures. Special tools and equipment are inspected and tested in
- 22
ZS-QA-10 Revision 10 Information Use accordance with approved procedures that describe the inspection and test methods, time intervals, maintenance methods, and personnel qualifications and training requirements.
3.13.2 USNRC-Licensed Packages Zion Solutions shall meet the requirements of 10CFR71 for restrictions concerning handling, storage, and shipping of NRG Licensed packages.
Transportation cask handling and operation shall conform to the handling and operating procedure for each licensed cask.
Prior to the shipment of a transport cask, conditions of the NRC's Certificate of Compliance (specifications, tests, and inspections) shall be satisfied.
Required shipping papers shall be prepared and shall accompany the shipment in accordance with regulatory requirements and approved procedures.
3.14 Inspection, Test, and Operating Status Methods to indicate the status of inspections, tests, and operating status of systems for important-to-safety items and other selected tasks shall be utilized. Methods used will assure that required inspections and tests are performed and to assure that items which have not passed the required inspections or tests are not inadvertently installed, used or operated and to prevent inadvertent operation of systems. These methods provide for identification of items which have satisfactorily passed the required inspections and tests.
The status of items can be determined at any point throughout an operational process to prevent inadvertent use, installation, or operation of nonconforming or defective items. Status indicators are required to the extent possible to prevent operation of items that are removed from service for test, calibration, maintenance, or repair, and to ensure that required inspections and tests have been performed.
Status is identified by the use of tags, markings, stamps, or travelers. The authority for application and removal of status indicators is identified in approved procedures.*
3.15 Nonconforming Materials, Parts or Components ITS items that do not conform to specified requirements are controlled to prevent inadvertent installation or use in accordance with approved procedures. Procedures include controls. that provide for reporting, identifying, documenting, evaluating, segregating (when feasible), dispositioning nonconforming items, and notifying affected organizations.
23
ZS-QA-10 Revision 10 Information Use All project personnel are responsible for reporting nonconforming conditions.
Management, at all levels, fosters a "no fault" attitude toward the identification of conditions that are adverse to quality, such as failures, malfunctions, nonconformances, a*nd out-of-control processes including the failure to follow procedures. Nonconforming items are identified by using marking, tagging, or other means that do not adversely affect their end use.
To avoid inadvertent use, nonconforming items are segregated in holding areas when feasible, or in the case of large items, marking, or roping designates special storage areas.
Conditions that may be reportable per 10CFR72.242, 10CFR71.95, or 10CFR21 shall be reported in accordance with approved procedures.
Management shall establish and implement a process for identifying, controlling, evaluating, and dispositioning nonconforming conditions. Such items, services or activities shall be documented and controlled to prevent inadvertent installation or use.
Disposition of nonconformances shall be addressed in a timely manner by management. Personnel performing evaluations to determine a disposition shall have demonstrated competence in the specific area they are evaluating, have an adequate understanding of the requirements, and have access to pertinent background information. The disposition of nonconformances is evaluated and approved by QA.
Disposition of a nonconformance, involving repair or use-as-is, is based on documented technical justification to assure continued compliance with design, regulatory, and contractual requirements, and may include provisions for retest or re-inspection to the original acceptance criteria. Any changes to design require the same design controls as those applied to the original design. Accept-as-is dispositions of materials and items require engineering approval. Accepted deviations are reflected in as-built records.
Reports of nonconforming conditions are closed and documented by QA personnel and records are maintained in accordance with approved procedures.
3.16 Corrective Action Conditions adverse to quality (e.g., nonconformances, failures, malfunctions, deficiencies, defective material, etc.) are promptly identified and evaluated to determine corrective action in accordance with established procedures.
Corrective action shall be promptly initiated when it is determined that a condition adverse to quality exists. In cases where it is not possible to accomplish a corrective action immediately, the appropriate management provides a written response describing the cause of the deficiency and the proposed corrective action to be completed within a specified time.
24
ZS-QA-10 Revision 10 Information Use Management shall exercise controls to ensure that conditions adverse to quality are promptly detected and corrected or prevented, and ensure continuous quality improvement in project activities and products. The management control systems established includes problem investigation, evaluation, reporting, and follow-up action taken to verify that corrective action has been thoroughly implemented and such conditions are effectively resolved.
For significant conditions adverse to quality, the condition, the cause of the condition and the corrective action taken is documented and reported to appropriate levels of management. Follow-up action shall be taken to verify effective implementation of the required corrective actions to prevent recurrence and to verify that they are effectively implemented. The GM, or designee, is responsible for reviewing the condition and determining validity. The GM will assure that validated conditions are processed in accordance with the project's corrective action program.
The QAM has the authority to stop wo~k or ensure adequate controls are in place until effective corrective action has been taken and any applicable changes have been incorporated in procedures and communicated to appropriate personnel.
Management will periodically analyze and assess CRs for apparent trends~ The GM, or designee, will evaluate recommendations for consideration to improve or enhance procedures, systems or processes.
3.17 Quality Assurance Records The requirements below do not apply to records. that are determined to be exempt from records keeping requirements in accordance with the terms of any NRG-approved records exemption that may be granted to ZionSolutions for records related to the Zion station.
3.17 .1 Record Management System Quality Records shall be identified, controlled and stored in accordan~e with written procedures.
The record system includes the retention of those design, fabrication, inspection, operation, and surveillance records essential to demonstrate product quality. It provides for the identification of materials and their corresponding manufacturing, installation, inspection, test, and audit results.
Requirements and responsibilities for the transmittal, distribution, retention, maintenance, and disposition of records are specified in approved procedures. QA records shall be protected against damage, deterioration, unauthorized change, or loss. For any work performed, the records to be generated must be identified, along with a means of matching the record to 25
ZS-QA-10 Revision 10 Information Use the item or activity to which it applies. Records must be legible, reproducible, and accurate.
3.17 .2 Authentication Documents shall be considered valid records only if stamped, initialed, or signed and dated by authorized personnel or otherwise authenticated, including the use of electronic approval and authorization. This authentication may take the form of a statement by the responsible individual or organization. Handwritten signatures are not required if the document is clearly identified as a statement by the reporting individual or organization. These records may be originals or reproduced copies.
3.17.3 Index The records indexing system must include records identification, location of
_ the record within the system, and minimum retention time. The records and/or indexing system(s) shall provide sufficient information to permit identification between the record and the items or activities to which it applies.
3.17 .4 Distribution and Control The records shall be distributed, handled, ~nd controlled in accordance with written procedures. Measures shall be established to preclude the entry of unauthorized personnel into the storage area, or the distribution of records to unauthorized personnel. Records maintained by the supplier at their facility or other location shall be accessible to the purchaser or their designated alternate.
3.17 .5 Classification of Records Records shall be classified for retention and storage requirements as either lifetime or non permanent. Records that meet any of the following criteria are designated Lifetime records and must be maintained.
Project lifetime records shall include, as a minimum, design specifications, stress reports or stress calculations, "as-built" and interface control drawings, copies of material test reports, tabulation of materials for "as-built" configuration, NOE reports including examination reports, and nonconformance reports. Lifetime record retention is based on the life of the program, life of the item, life of the facility, or life of the license, as applicable.
26
ZS-QA-10 Revision 10 Information Use Nonpermanent records are required to show evidence that an activity was performed in accordance with applicable requirements. Retention times must be established in writing.
In addition., retention periods specified in various governing codes and standards (e.g. 10CFR71, 10 CFR 72) will be included in the retention requirements established in approved procedures for QA records.
For subcontractors/sub-suppliers, the original QA record of the deliverables will be transmitted to ZionSo/utions when applicable.
3.17.6 Storage Requirements The records shall be stored in predetermined location(s) that meet the requirements of applicable standards, codes, and regulatory agencies.
Prior to storage of records, a written storage procedure shall be prepared and responsibility assigned for enforcing the requirements of that procedure.
Records shall be stored to prevent damage from moisture or temperature.
All records maintained in hard copy form shall be firmly attached to binders or placed in folders, envelopes, or boxes for storage in file cabinets or within containers on shelving. Records may be stored in electronic media provided that the process for managing and storing the records are documented in approved procedures. Media used for the retention of records include, but are not limited to, microfilm, compact disks, magnetic media, optical disks or servers. The format used must be capable of producing legible and complete documents during the entire retention period.
Records shall be stored in facilities that minimize the risk of damage or destruction from the following:
- Natural disasters such as wind, flood, or fires;
- Environmental conditions such as high and low temperatures and humidity; and
- Infestation by insects, mold, or rodents.
Records are maintained in accordance with approved procedures.
3.17.7 Disposition Various regulatory agencies have requirements concerning records that are within the scope of the QAPP. The most stringent requirements shall be used in determining the final disposition.
27
ZS-QA-10 Revision 10 Information Use 3.18 Audits Planned internal audits are scheduled and performed per approved procedures or checklists. Elements of the QAPP will be audited at least every 24 months to provide comprehensive, independent verification and evaluation of all aspects of the quality assurance program and to determine its effectiveness. Scheduling, preparation, personnel selection, performance, reporting, response, follow-up action, and records management will be performed in accordance with approved procedures.
Audits of ITS-A/ B suppliers and subcontractors will be conducted as necessary, but not less than once every three years, to assess compliance with applicable requirements of this QAPP.
3.18.1 Scheduling, Preparation, and Performance Internal and external audits are* scheduled based on the status and importance of an activity. Schedules are updated as necessary to ensure that adequate coverage is maintained.
The audit scope shall encompass evaluation of quality system practices and/or procedures and the effectiveness of their implementation, monitoring of operations and activities, and a review of pertinent documents and their control and maintenance.
An audit team, composed of one or more qualified auditors is identified for each audit using personnel who have no direct responsibility for the activity being covered. A lead auditor, as a member of the team, is designated as a team leader.
The key elements of the audit program are:
- Scheduling and notifying management of scope and nature of audit
- Team selection, orientation, and planning
- Entrance conference
- Exit conference
- Reporting and response
- Follow-up action 3.18.2 Reporting, Response, Follow-up.;Action, and Records Audit reports are prepared upon completion of the audit and distributed to .
appropriate management for review and response. Management of the audited organizations provide a response to all identified conditions adverse 28
ZS-QA-10 Revision 10 Information Use to quality that includes corrective actions, including cause and action to prevent recurrence, and a schedule for completion, when applicable. Audit files are retained as quality records in accordance with approved praced ures.
The results of internal audits, surveillances and independent assessments and audits of Subcontractors will be utilized as input into the continuous improvement effort through identification in the CR system. Re-audit of deficient areas will be performed when required.
3.18.3 Surveillance Surveillances are performed and documented when it is determined that it is necessary to monitor or observe an item or activity to verify conformance.
Adequate demonstration of the areas covered by surveillance is a requirement to be considered as part of an effective audit program.
Surveillance must be documented in sufficient detail to identify the activity covered, identify individuals doing surveillance, and to document results and any corrective measures necessary.
29
ZS-QA-10 Revision 10 Information Use
4.0 REFERENCES
Title 10 of the Code of Federal Regulations, Part 21, "Reporting of Defects and Noncompliance."
Title 10 of the Code of Federal Regulations, Part 50 Appendix B, "Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants."
Title 10 of the Code of Federal Regulations, Part 71, Subpart H, "Quality Assurance Requirements for Packaging and Transportation of Radioactive Waste."
Title 10 of the Code of Federal Regulations, Part 72, Subpart G, "Quality Assurance Requirements for the Independent Storage of Spent Nuclear Fuel, High Level Radioactive Waste, and Reactor-Related Greater Than Class C Waste."
NUREG/CR-6407 [INEL-95/0551], Classification of Transportation Packaging and Dry Spent Fuel Storage System Components According to Importance to Safety, February 1996.
Regulatory Guide 7.10, "Establishing Quality Assurance Pro_grams for Packaging Used in the Transport of Radioactive Material," Revision 2, March, 2005.
Nuclear Energy Institute (NEI) NEI 14-05, "Guidelines for the Use of Accreditation in Lieu of Commercial Grade Surveys for Procurement of Laboratory Calibration and Test Services," revision 0, and associated NRC Safety Evaluation dated February 9, 2015.
30
ZS-QA-10 Revision 10 Information Use Figure 1 ZionSolutions Restoration Project Organization Chart (Generic Titles / Simplified Reporting)
President ZionSolutions I
Executive Vice President- Chief Corporate QA Director Nuclear Officer EnergySolutions ZionSo/utions I
I I
I I
I I
Quality Assurance Manager ------- General Manager ZionSo/utions I
I I I I I I Decommissioning Radiation Protection ISFSI Manager Licensing Manager Engineering Manager Training Manager Plant Manager Manager 31
ZS-QA-10 Revision 8 Information Use APPENDIX A IMPORTANT-TO-SAFETY STRUCTURES. SYSTEMS AND COMPONENTS The pertinent quality assurance requirements of 10CFRSO, Appendix B, 10CFR 71 Subpart H and 10 CFR 72 Subpart G will be applied, as a minimum, to all qu~lity activities affecting the Important-to-Safety Structures, Systems and Components (SSCs) associated with spent fuel storage and transportation packages.
NOTE The safety classification of SSCs of the Plant and ISFSI Facility may be revised based on engineering evaluations and a revision to the Zion DSAR during the decommissioning process. These modifications are controlled in accordance with the Design Control process and are not considered a reduction in the commitments to the QAPP.
The safety classification of NRG Licensed ISFSI Dry Fuel Storage Components and Transportation Packages may not be revised using the Zion Design Control process.
These modifications must be made by the NRC Certificate Holder. The Certificate Holder is responsible for design and licensing controls for these components under their NRG approved Quality Assurance Program. Zion utilizes these types of components and packages under the provisions of NRC General License for Radioactive Material Transportation Packages (10 CFR 71) and Spent Fuel Storage (10 CFR 72).
Important-to-Safety SSCs associated with spent fuel storage and radioactive material transportation packages are defined below:
IMPORTANT-TO-SAFTY AS DEFINED BY 10 CFR 71 AND 10 CFR 72 A. Dry Spent Fuel Storage (10 CFR 72)
SSC Quality Design/License Category Responsible Transportable Storage Canister and Fuel ITS-A NAC Intl.
Basket Assembly, Internals Vertical Concrete Cask ITS-B NAC Intl.
ISFSI Pad ITS-C Zion 32
ZS-QA-10 Revision 10 Information Use IMPORTANT-TO-SAFETY. STRUCTURES. SYSTEMS AND COMPONENTS
- 8. Transport of Spent Fuel and GTCC Waste (10 CFR 71)
SSC Quality Design/License Category Responsible Transportable Storage Canisters and Fuel Basket ITS-A NAG Intl.
Assembly Transportable Storage Canister and Basket ITS-B NAG Intl.
Assembly For GTCC Waste Containers MAGNATRAN Transport Cask ITS-A NAG Intl.
C. Radioactive Material Transport Packages (10 CFR 71) .
Radioactive Material Transport Packages subject to the provisions of 10 CFR 71, Subpart C, "General Licenses" are "Important-to-Safety" and subject to the applicable requirements of the QAPP.
NOTES:
- 1. See NAG MAGNASTOR Systems Final Safety Analysis Report (FSAR) and associated NAG specifications for additional classification information.
- 2. See NAG MAGNATRAN Transport Cask Safety Analysis Report and associated NAG specifications for additional classification information.
- 3. For the definition of Quality Categories Important-To-Safety (ITS) A, B, and C, refer to NUREG/CR-6407.
33
ZS-QA-10 Revision 10 Information Use Appendix B 5.0 ADMINISTRATIVE CONTROLS (moved from Technical Specifications -
Technical Specification numbering preserved to facilitate comparison) 5.1 Responsibilities - Incorporated into QAPP Section 2.1.
5.2 Organization - Incorporated into QAPP Section 2.2.
5.3 Facility Staff Qualifications 5.3.1 Staff Qualifications - Each member of the facility staff (including audit/survey, surveillance and inspection personnel) shall have sufficient qualifications to perform their assigned duties. Implementing procedures provide the guidance used for determining and assessing appropriate staff qualifications. ZNPS staff including Health Physics personnel shall continue to meet or exceed ANSI N18.1, March 8, 1971 training and qualification requirements for decommissioning activities including final status surveys.
In addition, either the Manager of the Health Physics Department or the Lead Health Physicist shall meet or exceed the qualifications of .
"Radiation Protection Manager" of Regulatory Guide 1.8, September 1975.
5.5 Procedures 5.5.1 Procedures - Written procedures shall be established, implemented, and maintained covering the following activities:
- b. Fire Protection Program implementation; and
- c. All programs specified in 5.6 (below).
5.6 Programs and Manuals The following programs shall be established, implemented and maintained.
5.6.1 Offsite Dose Calculation Manual (ODCM)
- a. The ODCM shall contain the methodology and parameters used in the calculation of offsite doses resulting from radioactive gaseous effluents, and in the conduct of the radiological environmental monitoring program;
- b. The ODCM shall also contain the radioactive effluent controls and radiological environmental monitoring activities, and descriptions of the information that should be included in the Annual Radiological Environmental Operating and Radioactive Effluent Release Reports required by 5.7.2 and 5.7.3 of this Appendix;
- c. Licensee initiated changes to the ODCM:
- 1. Shall be documented and records of reviews performed shall be retained. This documentation shall contain:
34
ZS-QA-10 Revision 10 Information Use I. Sufficient information to support the change(s) together with the appropriate analyses or evaluations justifying the change(s), and II . A determination that the change(s) will maintain the levels of radioactive effluent control required by 10 CFR 20.1302, 40 CFR 190, 10 CFR 50.36a, and 10 CFR 50. Appendix I, and do not adversely impact the accuracy or reliability of effluent, dose or setpoint calculations:
- 2. Shall become effective after the approval of the Decommissioning Plant Manager or designee; and .
- 3. Shall be submitted to the NRG in the form of a complete, legible copy of the entire ODCM as a part of or concurrent with the Radioactive Effluent Release Report for the period of the report in which any change in the ODCM was made effective. Each change shall be identified by markings in the margin of the affected pages, clearly indicating the area of the page that was changed, and shall indicate the date (i.e., month and year) the change was implemented.
5.6.2 Radioactive Effluent Controls Program - This program conforms to 10 CFR 50.36a for the control of radioactive effluents and for maintaining the doses to members of the public from radioactive effluents as low as reasonably achievable. The program shall be contained in the ODCM, shall be implemented by procedures, and shall include remedial actions to be taken whenever the program limits are exceeded. The program shall include the following elements, as applicable:
- a. Limitations on the functional capability of radioactive gaseous monitoring instrumentation including surveillance tests in accordance with the methodology in the ODCM;
- b. Deleted.
- c. Monitoring, sampling, and analysis of radioactive gaseous effluents in accordance with 10 CFR 20.1302 and with the methodology and parameters in the ODCM;
- d. Deleted.
- e. Determination of cumulative and projected dose contributions from radioactive effluents for the current calendar quarter and current calendar year in accordance with the methodology and parameters in the ODCM at least every 31 days;
- f. Deleted.
35
ZS-QA-10 Revision 10 Information Use
- g. Limitations on the dose rate resulting from radioactive material released in gaseous effluents to areas beyond the site boundary conforming to the following:
- 1. For tritium and for all radionuclides in particulate form with half-lives greater than 8 days: less than or equal to a dose rate of 1500 mrem/yr to any organ;
- h. Limitations on the annual and quarterly doses to a member of the public from tritium and all radionuclides in particulate form with half-lives greater than 8 days in gaseous effluents released to areas beyond the site boundary, conforming to Appendix I to 10 CFR 50; and i* Limitations on the annual dose or dose commitment to any member of the public due to releases of radioactivity and to radiation from uranium fuel cycle sources, conforming to 40 CFR 190.
5.6 Programs and Manuals 5.6.3 Outdoor Storage Tank Radioactivity Monitoring Program - This program provides controls for the quantity of radioactivity contained in unprotected outdoor liquid storage tanks. This program is required if radioactive liquid is contained in unprotected (as defined below) outdoor storage tanks. The liquid radwaste quantities shall be determined in accordance with the ODCM.
The program shall include a surveillance program to ensure that the quantity of radioactivity contained in all outdoor liquid radwaste tanks that are not surrounded by liners, dikes, or walls, capable of holding the tank contents and that do not have tank overflows and surrounding area drains connected to the liquid radwaste treatment system is less than the amount that would result in concentrations less than the limits of 10 CFR 20, Appendix B, Table 2, Column 2, at the nearest potable water supply and the nearest surface water supply in an unrestricted area, in the event of an uncontrolled release of the tank contents.
- 5. 7 Reporting Requirements The following reports shall be submitted in accordance with 10 CFR 50.4 (note that a single submittal may be made for a multiple unit station):
5.7.1 (deleted)
- 5. 7.2 Annual Radiological Environmental Operating Report - The Annual Radiological Environmental Operating Report covering unit activities during the previous calendar year shall be submitted before May 15 of each year. The report shall include summaries, interpretations, and analysis of trends of the results of the Radiological Environmental Monitoring Program for the reporting period. The material provided shall be consistent with the objectives outlined in (1) the ODCM and (2) 36
- --- -------------~
ZS-QA-10 Revision 10 Information Use Sections IV.8.2, IV.B.3, and IV.C of Appendix I of 10 CFR Part 50. In the event that some individual results are not available for inclusion with the report, the report shall be submitted noting and explaining the reasons for the missing results. The missing data shall be submitted in a supplementary report as soon as possible. A single submittal may be made for a multiple unit station.
5.7.3 Radioactive Effluent Release Report- The submittal should combine sections common to all units at the station. The Radioactive Effluent Release Report covering unit activities shall be submitted prior to May 1 of each year in accordance with 10 CFR 50.36a. The report shall include a summary of the quantiti.es of radioactive gaseous effluents and solid waste released from the unit. The material provided shall be (1) consistent with the objectives outlined in the ODCM and Process Control Program and (2) in conformance with 10 CFR 50.36a and Section IV.B.1 of Appendix It to 10 CFR Part 50. A single submittal may be made for a multiple unit station.
5.9 Reviews 5.9.1 Qualified Technical Review - Thorough reviews of the documents specified below shall be conducted by a Qualified Technical Reviewer.
Persons performing these reviews shall be knowledgeable in the subject area being reviewed. Qualified Technical Reviews must be completed prior to implementation of proposed activities.
- a. Qualified Technical Reviewers shall be individuals without direct responsibility for the document under review; these reviewers may be from the same functionally cognizant organization as the individual or group performing the original work.
- b. Qualified Technical Reviewers shall have at least 5 years of professional experience and either a Bachelor's degree in Engineering or the Physical Sciences or shall have equivalent qualifications evaluated on a case by case basis and approved by the Decommissioning Plant Manager. The Decommissioning Plant Manager shall document the appointment of Qualified Technical Reviewers.
- c. The following subjects shall be independently reviewed by a Qualified Technical Reviewer:
- 1. 10 CFR 50.59 and 10 CFR 72.48 evaluations for changes in the facility as described in the DSAR, changes in procedures as described in the DSAR, and tests or experiments not described in the DSAR to verify that such actions do not involve a change to the Technical Specifications or will not require NRG approval pursuant to 10 CFR 50.59 and 10 CFR 72.48; 37
ZS-QA-10 Revision 10 Information Use
- 2. Proposed changes to the programs required by secti.on 5.6 above, and to verify that such changes do not involve a change to the Technical Specifications and will not require NRC approval pursuant to 10 CFR 50.59 and 10 CFR 72.48; and
- 3. Proposed changes to the license or Technical Specifications ..
38