Pages that link to "Control rod 26-19"
Jump to navigation
Jump to search
The following pages link to Control rod 26-19:
Displayed 35 items.
- ML13057A103 (← links)
- ML13042A425 (← links)
- ML100880261 (← links)
- ML073040388 (← links)
- IR 05000341/2018004 (← links)
- ML17081A543 (← links)
- ML17081A537 (← links)
- IR 05000341/2019001 (← links)
- ML17214A214 (← links)
- ML19257B495 (← links)
- ML19323D332 (← links)
- ML19350A900 (← links)
- ML19323G418 (← links)
- ML20010H874 (← links)
- ML031130318 (← links)
- ML20070J699 (← links)
- ML20083K314 (← links)
- ML20072S578 (← links)
- ML20125D678 (← links)
- ML20125D569 (← links)
- ML20202F619 (← links)
- ML20207B261 (← links)
- ML20238A104 (← links)
- ML20245L284 (← links)
- JAFP-83-0934, Monthly Operating Rept for Aug 1983 (← links)
- ML20241A246 (← links)
- IR 05000324/1982005 (← links)
- ML23012A136 (← links)
- 05000440/LER-1991-018, :on 911006,control Rod 46-23 Exceeded Max Scram Time to Position 43 & Max Scram Insertion Time to Position 43.Caused by Contaminated Valve Disc & Seats.Valves Replaced W/New Valves from Two Other Lots (← links)
- 05000440/LER-1991-017, :on 911002,high Pressure Core Spray Pump Declared Inoperable Due to Motor Bearing Oil Reservoir Drain Plug Failure.Caused by Design Deficiency.Drain Plugs Will Be Replaced W/Ball Valve Arrangement (← links)
- 05000325/LER-1983-032-03, /03L-0:on 830824,25 & 29 During Shutdown,Startup & Power Operation,Control Rods Had No Indications at Identified Positions.Caused by Failure of Control Rod Position Indication Probe Connectors (← links)
- 05000324/LER-1983-056-03, /03L-0:on 830605,while Withdrawing Control Rods to Increase Reactor Power Level,Control Rod 26-19 Did Not Have RTGB Position Indication as Required.Caused by Faulty Position Indication Probe (← links)
- 05000325/LER-1981-076-03, /03L-0:on 811220,control Rod Driveline Accumulator Low Pressure/High Level Annunciator for Control Rod 26-19 Was Received.Caused by Valve Packing Leak on Nitrogen Charging Inlet Isolation Valve.Packing Readjusted (← links)
- 05000333/LER-1980-045-03, /03L-0:on 800429,during Normal Operation,Rod to Block Monitor a Became Inoperable When Control Rod 26-19 Was Selected Due to Inadequate Number of Low Power Range Monitor Inputs.Caused by Age.Monitor Strings Will Be Replaced (← links)
- IR 05000259/1992301 (← links)