Browse wiki

ASME Section XI +  and ASME Section III +

Strontium +, Iodine +, Carbon +, Lead +, Tellurium +, Barium +  and Cerium +

10 CFR 50.49 +  and 10 CFR 50 Appendix B +

05200040  +  and 05200041  +

GDC 23 +, GDC 2, Design bases for protection against natural phenomena +, GDC 4, Environmental and dynamic effects design bases +  and GDC 1, Quality standards and records +

ML19003A363 +, ML19003A363 +, ML19003A363 +, ML19003A363 +, ML19003A363 +, ML19003A363 +, ML19003A363 +, ML19003A363 +, ML19003A363 +  and ML19003A363 +

5.787037e-4 d (0.0139 hours, 8.267196e-5 weeks, 1.9025e-5 months)  +, 0.00116 d (0.0278 hours, 1.653439e-4 weeks, 3.805e-5 months)  +, 2.314815e-5 d (5.555556e-4 hours, 3.306878e-6 weeks, 7.61e-7 months)  +, 3.472222e-5 d (8.333333e-4 hours, 4.960317e-6 weeks, 1.1415e-6 months)  +, 0.00112 d (0.0269 hours, 1.603836e-4 weeks, 3.69085e-5 months)  +, 2.777778e-4 d (0.00667 hours, 3.968254e-5 weeks, 9.132e-6 months)  +, 4.62963e-5 d (0.00111 hours, 6.613757e-6 weeks, 1.522e-6 months)  +, 8.333333e-4 d (0.02 hours, 1.190476e-4 weeks, 2.7396e-5 months)  +, 0.0212 d (0.509 hours, 0.00303 weeks, 6.966955e-4 months)  +  and 0.00515 d (0.124 hours, 7.357804e-4 weeks, 1.693225e-4 months)  +

IEEE 344-1987 +, IEEE 383 +, IEEE 344 +, IEEE 382 +, IEEE 323 +, IEEE 323-1974 +, IEEE 382-1996 +, IEEE 603-1991 +, IEEE C37 +, IEEE 383-1974 +, IEEE 308 +, IEEE 741-1997 +, IEEE 344-1971 +, IEEE 382-1972 +, IEEE 317 +, IEEE 317-1983 +, IEEE 535 +, IEEE 100 +, IEEE 381-1977 +, IEEE 535-1986 +, IEEE 572-1985 +, IEEE 627 +, IEEE 100-1996 +, IEEE 741-1986 +, IEEE 494-1974 +, IEEE 627-1980 +, IEEE 420-1982 +, IEEE 308-1991 +, IEEE 572 +, IEEE 650-1990 +...

NUREG/CR-2157 +, NUREG/CR-2156 +, NUREG/CR-3156 +, NUREG-1465, Provides Commission W/Results & Findings of Evaluation of Impact of Implementing Revised Source Term Described in NUREG-1465, Accident Source Terms for Light-Water Npps, for Operating Reactors +  and NUREG-0588, Responds to 870709 Request for NRR Assistance in Determining Adequacy of Two Test Repts Re Acceptance Criteria of NUREG-0588,Category I.Qualification of Kulka Terminal Blocks Demonstrated & Not Used in Instrumentation Circuits +

Regulatory Guide 1.183 +, Regulatory Guide 1.97 +, Regulatory Guide 1.180 +, Regulatory Guide 1.63 +, Regulatory Guide 1.33 +, Regulatory Guide 1.100 +, Regulatory Guide 1.92 +, Regulatory Guide 1.61 +, Regulatory Guide 1.122 +, Regulatory Guide 1.89 +, Regulatory Guide 1.18 +, Regulatory Guide 1.73 +, Regulatory Guide 1.156 +, Regulatory Guide 1.158 +  and Regulatory Guide 1.131 +

3D-1 +, 3D-2 +, 3D-3 +, 3D-17 +, 3D-78 +, 3D-79 +, 3D-90 +, 3D-99 +, 3D-4 +, 3D-5 +, 3D-100 +, 3D-6 +, 3D-101 +, 3D-7 +, 3D-8 +, 3D-9 +, 3D-10 +, 3D-11 +, 3D-12 +, 3D-13 +, 3D-14 +, 3D-15 +, 3D-16 +, 3D-41 +, 3D-65 +, 3D-42 +, 3D-43 +, 3D-44 +, 3D-45 +, 3D-46 +...

Ohio +, New Jersey +  and New York +

Reactor Coolant System +, Feedwater +, HVAC +, Residual Heat Removal +, Automatic Depressurization System +, Main Steam +  and Containment Spray +

Safe Shutdown +, Boric Acid +, Safe Shutdown Earthquake +, Operating Basis Earthquake +, High Energy Line Break +, Earthquake +, Loctite +  and Flow Induced Vibration +