ML20153G751
| ML20153G751 | |
| Person / Time | |
|---|---|
| Site: | San Onofre  |
| Issue date: | 09/22/1998 |
| From: | SOUTHERN CALIFORNIA EDISON CO. |
| To: | |
| Shared Package | |
| ML20153G723 | List: |
| References | |
| NUDOCS 9809300211 | |
| Download: ML20153G751 (18) | |
Text
& #Wau d
- ass.-el.2,e as-.
J.wM a h em 466-4d-@ 6. 4 had 44 4 -.4d Aa w.@ M h_
m e
-.4 3
,_%4..Ag.hp.44d48A-es4 m AA a
^--
-MM5MM-4-+.ahmb.A.-W-@4._,-i.LSM-.i_.&A.s4,w.
.J.sh M J Amae, dEMai.4e_AM 46_.5 L MaM M_m_
O
'I 9
4 s
I 1
)
ATTACHMENT A EXISTING TECHNICAL SPECIFICATION TABLE 3.3.1-1 SAN ONOFRE UNIT 2 Y
M T
9809300211 980922 PDR ADOCK 05000361 P
PDR u.
-A W-':
t-v-ye -
y
,e i.,--.
-mr-w rw--
-r-,-
- - - - - -r
- - -ww*e--
e
+.+m--.+
.-~'se
l RPS Instrumentation-Operating 3.3.1 Table 3.3.1 1 (page i of 2)
Reactor Protective System Instrumentation APPLICABLE MODES OR
' OTHER SPECIFIED SURVE1LLANCE FUNCTION CONDITIONS REQUIREMENTS ALLOWABLE VALUE i;
1.
Linear Power Level - High-1,2 SR 3.3.1.1 s 111.0% RTP SR 3.3.1.4 SR 3.3.1.6 i
SR 3.3.1.8 SR 3.3.1.9 i
SR 3.3.1.13 2.
Logarithmic Power Level - High(a) 2(b)
SR 3.3.1.1 s.93% RTP j
SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 3.
Pressurizer Pressure - High 1,2
.SR 3.3.1.1 s 2385 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 4.
Pressurizer Pressure - Low (C}
1,2 SR 3.3.1.1
> 1700 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 i
5.
Containment Pressure - High 1,2 SR 3.3.1.1 s 3.4 psig SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 6.'
Steam Generator 1 Pressure. Low 1,2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 SR 3.3.1.9 i
SR 3.3.1.13 7.
Steam Generator 2 Pressure. Low 1,2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 (continued)
(a)' strip may be bypassed when THERMAL POWER is > 1E-4% RTP. Bypass shall be automatically removed when THERNAL POWER is 5 1E.4% RTP. Trip may be manually bypassed during physics testing pursuant to LCO 3.1.12.
(b) When any RTCB is closed.
(c) The setpoint may be decreased to a minimum value of 300 psia, a's pressurizer pressure is reduced, provided the margin between pressurizer pressure end the setpoint is maintained s 400 psia. Trips may be bypassed when j
pressurizer pressure is < 400 psia. Bypass shall be automatically removed before pressurizer pressure exceeds 500 psia (thecorrespondingbistableallowablevalueiss472 psia).
SAN ON0FRE--UNIT 2 3.3-8 Amendment No. 127 v
~y
.v
--m.
..~. _ _ _._..._..._._ _. _. _.. _. _ _ _..... _ _ - _
RPS Instrumentation-Operating L
3.3.1 l
1 l
Table 3.3.1 1 (page 2 of 2)
Reactor Protective Syste:n Instrumentation APPLICABLE MODES OR OTHER SPECIFIED SURVEILLANCE FUNCTION-CONDITIONS REQUIREMENTS ALLOWABLE VALUE l
- 8. ~ Steam Generator 1 Level - Low 1.2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 9.
Steam Generator 2 Level - Low 1,2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 10, Reactor Coolant Flow - Low (d) 1,2 SR 3.3.1.1 Ramp: s 0.231 psid/sec.
SR 3.3.1.7 Floor: a 12.1 psid SR 3.3.1.9 Step: s 7.25 psid SR 3.3.1.12 SR 3.3.1.13 11.'
local Power Density - High(d) 1,2 SR 3.3.1.1 s21.0kW/ft SR 3.3.1.3 SR 3.3.1.4 SR 3.3.1.7 j.-
SR 3.3.1.9 r L.
SR 3.3.1.10 p
SR 3.3.1.13 p
- 12. Departure From Nucl ate Boiling 1,2 SR 3.3.1.1 a 1.31 Ratio (DNBR) LowI SR 3.3.1.2 1
~'
SR 3.3.1.4 SR 3.3.1.5 SR 3.3.1.7 SR 3.3.1.9
- SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 SR 3.3.1.13 (d) Trip may be bypassed when THERMAL POWER is < IE 4% RTP. Bypass shall be automatically removed when THERMAL POWER 15 a 1E 4% RTP. During testing pursuant to LCO 3.1.12, trip may be bypassed below 5% RTP. Bypass shall
. be automatically removed when THERMAL POWER is a 5% RTP.
t
. SAN ONOFRE--UNIT-2 3.3-9 Amendment No. 127 i
i
- ~
l ATTACIIMENT U EXISTING TECIINICAL SPECIFICATION TAllLE 3.3.1-1 SAN ONOFRE UNIT 3 l
1 l
6 I
m_.
RPS Instrumentation-Operating 3.3.1 Table 3.3.1-1 (page 1 of 2)
. Reactor Protective System Instrumentation n.
APPLICABLE MODES OR J
OTHER SPECIFIED SURVEILLANCE FUNCTION.
CONDITIONS REQUIREMENTS ALLOWABLE VALUE
- 1.. Linear Power Level - High 1.2 SR 3.3.1.1 s 111.0% RTP
' SR 3.3.1.4 SR 3.3.1.6 SR 3.3.1.7 SR 3.3.1.8 SR 3.3.1.9 SR 3.3.1.13 2 Logarithmic Power level - High(a) 2 ID)
SR 3.3.1.1 s.93% RTP SR 3.3,1.7 SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 3.
Pressurizer Pressure - High 1.2 SR 3.3.1.1 s 2385 psia l
)
SR 3.3.1.9 SR 3.3.1.13
)
4.
Pressurizer Pressure - Low (C) 1.2 SR 3.3.1.1 a 1700 psia SR 3.3.1.7 j
SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 4
5.
Containment Pressure High 1.2 SR 3.3.1.1.
s 3.4 psig j
SR 3.3.1.7 SR 3.3.1.9 i
SR 3.3.1.13 i
I i
- 6.. Steam Generator 1 Pressure-Low 1.2 SR 3.3.1.1 a 729 psia j
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 j
7.
Steam Generator 2 Pressure-Low 1.2 SR 3.3.1.1 a 729 psia tR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 (continued) i i-(a) Trip may be bypassed when THERMAL POWER is > IE.4% RTP. Bypass shall be automatically removed when THERMAL POWER is s 1E-4% RTP, Trip may be manually bypassed during physics testing pursuant to LCO 3.1.12.
(b) When any RTCB is closed.
-(c) The setpoint may be decreased to a minimum value of 300 psia, as pressurizer pressure is reduced, provided the margin between pressurizer pressure and the setpoint is maintained s 400 psia. Trips may be bypassed when pressurizer pressure is < 400 psia. Bypass shall be automatically removed before pressurizer pressure -
exceeds 500 psia (the corresponding bistable allowable value is s 472 psia).
e l-
- ? SAN ON0FRE--UNIT.3 3.3-8 Amendment No. 116 1
6
--9,-y y-c.
,m--
w.c a--
a
-p.,
-g-gm--
r-twr r
.. - -. -.... =.
l RPS Instrumentation-Operating
[
3.3.1 l.
' Table 3.3.1-1(page2of2)
Reactor Protective System Instrumentation APPLICABLE MODES OR OTHER SPECIFIED SURVEILLANCE FUNCTION CONDITIONS REQUIREMENTS ALLOWABLE VALUE
- 8.. Steam Generator ! Level - Low 1,2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 9.
Steam Generator 2 Level - Low 1,2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 10.
Reactor Coolant Flow - Low (d) 1,2 SR 3.3.1.1 Ramp: s 0.231 psid/sec.
SR 3.3.1.7 Floor: > 12.1 psid SR 3.3.1.9 Steps s 7.25 psid SR 3.3.1.12 SR 3.3.1.13 11.
Loca'l Power Density - High(d) 1,2 SR 3.3.1.1 s 21.0 kW/ft SR 3.3.1.3 SR 3.3.1.4 SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 SR 3.3.1.13 i
t
- 12. Departure From Nuc(1 ate Boiling 1,2 SR 3.3.1.1 a 1.31 Ratio (DNBR) - Low SR 3.3.1.2 SR 3.3.1.3 SR 3.3.1.4 SR 3.3.1.5 SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 SR 3.3.1.13 (d) Trip may be bypassed when THERMAL POWER is < IE-4% RTP. Bypass shall be automatically removed when THERMAL POWER is a IE-4% RTP. During testing pursuant to LCO 3.1.12, trip may be bypassed below 5% RTP. Bypass shall be automatically removed when THERMAL POWER is a 5% RTP.
l L
SAN ONOFRE--UNIT 3 3.3-9 Amendment No. 116
.w
l l
ATTACIIMENT C l'ROPOSED TECIINICAL SPECIFICATION TABLE 3.3.1-1 SAN ONOFRE UNIT 2 (REDLINE AND STRIKEOUT) l I
l l
m.
RPS Instrumentation-0perating 3.3.1 i
l Table 3.3.11 (page 1 of 2) l-Reactor Protective System Instrumentation t
t APPLICABLE MODES OR-OTHER SPECIFIED SURVEILLANCE FUNCTION CONDITIONS REQUIREMENTS ALLOWABLE VAIUE l
--1. ' Linear Power Level - High 1,2 SR 3.3.1.1 s 111.0% RTP SR 3.3.1,4 SR 3.3.1.6 SR 3.3.1.7 i
SR 3.3.1.9 SR 3.3.1.13 2.
Logarithmic Power Level - High(a) 2(b)
$g 3,3,3,g
-s.93% WTP SR 3.3.1.7 SR 3.3.1.9
.)
)
3.
Pressuriger Pressure - High 1,2 SR 3.3.1.1 s 2385 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 4.
Pressuriter Pressure - Low (C) 1,2 SR 3.3.1.1 a 1700' psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 5.
Containment Pressure - High 1,2 SR 3,3.1.1 s 3.4 psig SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13-6.
Steam Generator 1 Pressure-Low 1,2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 7.
Steam Generator 2 Pressure-Low 1,2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 (continued)
(a) 1 Trip may be bypassed when ' :""", !O:" logarithmic power is > IE-4% RTP. Bypass shall be automatically removed when MRMAt-+0WE4 logarithmic power is s 1E-4% RTP. Trip may be manually bypassed during physics testing
~
pursuant to LCO 3.1.12.
(b) When'any RTCB is closed.
(c) The setpoint may be decreased to a minimum value of 300 psia, as pressurizer pressure is reduced, provided the l
margin between pressurizer pressure and the setpoint is maintained s 400 psia. Trips may be bypassed when pressurizer pressure is < 400 psia. Bypass shall be automatically removed before pressurizer pressure
(-
exceeds 500 psia (the corresponding bistable allowable value is s 472 psia).
-SAN ON0FRE--UNIT 2-3.3-8 Amendment No. 127
RPS Instrumentation-Operating 3.3.1 Table 3.3.1-1 (page 2 of 2) j
. Reactor Protective System Instrumentation L
l-APPLICABLE MODES OR l
OTHER SPECIFIED SURVEILLANCE FUNCTION.
CONDITIONS REQUIREMENTS ALLOWABLE VALUE 8
h
- 8. - Steam Generator 1 Level - Low 1,2 SR 3.3.1.1 a 20%
l SR 3.3.1.7 i
SR 3.3.1.9 SR 3.3.1.13 9.
Steam Generator 2 Level - Low 1.2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3,3.1.9
+
SR 3.3.1.13
- 10. Reactor Coolant flow - Low (d) 1.2 SR 3.3.1.1 Ramp: s0.231psid/sec.
SR 3.3.1.7 Floor: a 12.1 psid SR 3.3.1.9 Step: s 7.25 psid l
- 11.. Local Power Density - High(d) 1.2 SR 3.3.1.1 s 21.0 kW/ft SR 3.3.1.3 SR 3.3.1.4 i
[,
SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 l
SR 3.3.1.13 12.
Departure From Nuc(l ate Boiling 1.2 SR 3.3.1.1 a 1.31 Ratio (DNBR) - Low SR 3.3.1.2 SR 3.3.1.3 SR 3.3.1.4' SR 3.3.1.5 SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 SR 3.3.1.13 (d) Trip may be bypassed when '":"'" ^%::Jogarithmic power is < IE-4% RTP. Bypass shall be automatically removed when '":"'"A " :" logarithmic' power.is a IE-4% RTP. During testing pursuant to LCO 3.1.12. trip may be bypassed below 5% RTP. Bypass shall be automatically removed when MMMAL-POWRiogarithmic power is a 5% RTP.
~
i s
l.
SAN.0NOFRE--UNIT 2' 3.3-9 Amendment No. 127 l
ATTACIIMENT D PROPOSED TECIINICAL SPECIFICATION TABLE 3.3.1-1 SAN ONOFRE UNIT 3 (REDLINE AND STRIKEOUT)
m. __ _.. _. _..._. _ _ -_._ _ _. _ _._
\\
RPS Instrumentation-Operating E
3.3.1-l Table 3.3.1-1 (page 1 of 2)
Reactor Protective System Instrumentation APPLICABLE MODES OR OTHER SPECIFIED SURVEILLANCE I
IUNC1104 CONDITIONS REQUIREMENTS ALLOWABLE VALUE-1r ' Linear Power Level - High 1,2
$R 3.3.1.1 s 111.0% RTP SR 3.3.1.4 SR 3.3.1.6 SR 3.3.1.7 SR 3.3.1.8 SR 3.3.1.9 SR 3.3.1.13 2.
Logarithmic Powe r Level - High(a) 2(b)
SR 3.3.1.1 s.93% RTP
. SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 3.
Pressurirer Pressure - High 1,2
$R 3.3.1.1 s 2385 psia SR 3.3.1.7
$R 3.3.1.9 SR 3.3.1.13
-4.
Pressurtier Pressure - LowICI-1,2
'SR 3.3.1.1 a 1700 psia j
SR 3.3.1,9
)
SR 3.3.1.12 i
SR 3.3.1.13
. 5.
Containment Pressure - High 1,2
$R 3.3.1.1 s 3.4 psig SR 3.3.1.7
$R 3.3.1.9
$R 3.3.1.13 I
6.
Steam Generator 1 Pressure-Low 1,2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 7.
Steam Generator 2 Pressure-Low 1,2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 i
)
$R 3.3.1.13 i
I (continued)
(al Trip may be bypassed when '":""'t F= logarithmic power is > IE-4% RTP. Bypass shall be automatically removed when MHMAt-POWE41ogarithmic' power is s IE 4% RTP. Trip may be manually bypassed during physics testing pursuant to LCO 3.1.12.
(b) ' When any RTCB is closed.
(c) The setpoint may'be decrease'd to a minimum value of 300 psia, as pressurizer pressure is reduced, provided the margin between pressurizer pressure and the setpoint is maintained s 400 psia. Trips may be bypassed when pressurizer pressure is < 400 psia. Bypass shall be automatically removed before pressurifer pressure exceeds 500 psia (the corresponding bistable allowable value is s 472 psia).
1;
' SAN ON0FRE--UNIT 3'
'3.3-8 Amendment No. 116 l
i, n
.a.
.. - _.m RPS Instrumentation-Operating 3.3.1 l.
' Table 3.3.1 1 (page 2 of 2)
Reactor Protective System Instrumentation
-o APPLICABLE MODES OR OTHER SPECIFIED SURVE!LLANCE FUNCTION CONDITIONS REQUIREMENTS ALLOWABLE VALUE 8.
Steam Generato'r 1 Level - Low 1.2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 9.
Steam Generator 2 Level - Low 1.2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3.3.1.9 i
l.
SR 3.3.1.13
- 10. Reactor Coolant Flow-Low (d) 1.2 SR 3.3.1.1 Ramp: s0.231psid/sec.
SR 3.3.1.7 Floor: i l2.1 psid SR 3.3.1.9 Steps s 7.25 psid
-SR 3.3.1.12 SR 3.3.1.13 11.
Local Power Density - HighId) 1.2 SR 3.3.1.1 s 21.0 kW/ft j
)
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3.3.1.11 SR 3.3.'l.12 SR 3.3.1.13 12.
Departure From Nucl ate Boiling 1,2 SR 3.3.1.1 a 1.31-Ratio (DNBR) - LowI SR 3.3.1.2 i
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 SR 3.3.1.13 4
(d)1 Trip may be bypassed when MRMM.-POWEAlogarithmic power is c.1E-4% RTP. Bypass shall be automatically removed when +MRMAt-MWEAlogarithmic powr is a 1E-4% RTP. During testing pursuant to LCD 3.1.12. trip may be bypassed j-below 5% RTP. Bypass shall be automatically removed when ' T^l P02:F. logarithmic power is a 5% RTP.
l i
. SAN ONOFRE--UNIT 3 3.3-9 Amendment No. 116
4 ATTACIIMENT E PROPOSED TECIINICAL SPECIFICATION TABLE 3.3.1-1 SAN ONOFRE UNIT 2
)
lJ RPS Instrumentation-Operating 3.3.1-TaV e 3.3.1-1 (page 1 of 2) r1
[
Reactor P jtective System Instrumentation p
i APPLICABLE MODES OR OTHER SPECIFIED SURVEILLANCE FUNCTION.
CON 0!TIONS REQUIREMENTS ALLOWABLE VALUE j
1.
Linear Power Level - High.
1,2
. SR 3.3.1.1 s 111.0% RTP SR 3.3.1.4 I
S'i 3.3.1.6.
SR 3.3.1.8 SR 3.3.1.9 SR 3.3.1.13 2.
Logarithmic Power Level - HighI8) 2(b)
SR 3.3.1.I' s.93% RTP SR 3.3.1.7 SR 3.3.1.9 l
SR 3.3.1.12 I
SR 3.3.1.13 3.
Pressurizer Pressure - High 1,2 SR 3.3.1.1 s 2385 psia I
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 4.
Pressurizer Pressure - Low (C) 1,2 SR 3.3.1.1 a 1700 psia SR 3.3.1.7 i
Sk 3,3.1.9 SR 3.3.1.12 SR 3.3.1.13 5.
Covainment Pressure - High 1,2 SR 3.3.1.1 s 3.4 psig SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 6.
Steam Generator 1 Pressure Low 1,2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 7.
Steam Generator 2 Pressure-Low 1,2 SR 3.3.1.1 2 729 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 (continued)
(a) Trip may'be bynassed when logarithmic power is > IE-4% RTP. Bypass shall be automatically removed when
. logarithmic power is s IE-4% RTP. Trip may be manually bypassed during physics testing pursuant to LCO 3.1.12.
(b) ' When any RTCB is closed.
~
(c) The setpoint may be decreased to a minimum va'ue of 300 psia, as pressurizer pressure is reduced, provided the
. margin between pressur'rer pressure and the setpoint is maintained s 400 psia. Trips may be bypassed when pressurizer pressure is < 400 psia. Bypass shall be automatically removed before pressurizer pressure exceeds $00 psia (the corresponding bistable allowable value is s 472 psia).
j; L
s 7
SAN ONOFRE--UNIT 2 3.3-8 Amendment No. 127
RPS Instrumentation-Operating 3.3.1 Table 3.3.11 (page 2 of 2)
Reactor Protective System Instrumentation APPLICABLE MODES OR OTHER SPECIFIED SURVEILLANCE FUNC110N CONDITIONS REQUIREMENTS ALLOWABLE VALUE 8.
Steam Generator 1 Level - Low -
1.2 SR 3.3.1.1 a 20%
SR 3.3.1,7 SR 3.3.1.9 SR 3.3.1.13 9.
Steam Generator 2 Level. Low
- 1.2 SR 3.3.1.1 a 20%
SR 3.3.1.7 SR 3.3.1.9
.j SR 3.3.1.13 10.'
Reactor Coolant flow - Low (d) 1.2 SR 3.3.1.1 Ramp: s0.231psid/sec.
SR 3.3.1.7 Floor; a 12.1 psid j
SR 3.3.1.9 Step: s 7.25 psid 1
Local Power Density - High(d) 1.2 SR 3.3.1.1-s 21.0 kW/ft SR 3.3.1.3 i~
SR 3.3.1.4 SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3,3,1,11 SR 3.3.1.12 l
SR 3.3.1.13 l
DepartureFromNucigateBoiling 1.2 SR 3.3.1.1 a 1.31 12.
. Ratio (DNBR) - LowI SR 3.3.1.2
!~
jr SR 3.3.1.5 i
SR 3.3.1.12 SR 3.3.1.13 (d)' Trip may be bypassed when loparithmic power is < IE 4% RTP. Bypass shall be automatically removed when logarithmic power is a 1E.4% RTP. During testing pursuant to LCO 3.1.12. trip may be bypassed below 5% RTP.
('
Bypass shall be autt,matically removed when logarithmic power is a 5% RTP.
- SAN'0N0FRE--UNIT 2 3.3-9 Amendment No. 127
ATTACIIMENT F PROPOSED TECIINICAL SPECIFICATION TABLE 3.3.1-1 SAN ONOFRE UNIT 3
RPS Instrumentation-Operating 3.3.1 Table 3.3.1-1(page1of2)
Reactor Protective System Instrumentation APPLICABLE MODES OR
. OTHER SPECIFIED SURVEILLANCE FUNCTION CONDITIONS RFQUIREMENTS ALLOWABLE VALUE 1.
Linear Power Level - High 1,2 SR 3.3.1.1 s 111.0% RTP SR 3.3.1.4-J SR 3.3.1.6 SR 3.3.1.7 SR 3.3.1.8 SR 3.3.1.9 SR 3.3.1.13 2.
Logarithmic Power Level - High(a) 2(D)
SR 3.3.1.1 s.93% RTP SR 3.3.1.7 l
SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 3.
. Pressurizer Pressure - High 1,2 SR 3.3.1.1 s 2385 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 4.
Pressuriger Pressure - LowICI 1,2 SR 3.3.1.1 2 1700 psia' SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.12 SR 3.3.1.13 5.
Containment Pressure - High 1,2 SR 3.3.1.1 s 3.4 psig SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 6.
Steam Generator 1 Pressure-Low 1,2 SR 3.3.1.1 a 729 psia l
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 7.
Steam Generator 2 Pressure-tow 1.2 SR 3.3.1.1 a 729 psia SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 (continued)
(a) Trip may be bypassed when logarithmic power 1 > IE-4% RTP. Bypass shall be automatically removed when logarithmic power is s IE-4% RTP. Trip may be manually bypassed during physics testing pursuant to LCO 3.1.12, (b) When any RTCB is closed.
l.
(c)' The setpoint may be decreased to a minimum value of 300 psia, as pressurizer pressure is reduced, provided the margin between pressurizer pressure and the setpoint is maintained s 400 psia. Trips may be bypassed when l
pressurizer pressure is < 400 psia. Bypass shall be automatically removed before pressurizer pressure exceeds 500 psia (the corresponding bistable allowable value is s 472 psia).
f
{
SAN ON0FRE--UNIT 3 3.3-8 Amendment No. 116 l
l r
<w
=
w
=
w
RPS Instrumentation-Operating 3.3.1 Table 3.3.1-1 (page 2 of 2)
Reactor Protective System Instrumentation APPLICABLE MODES OR OTHER SPECIFIED SURVEILLANCE FUNCTION CONDITIONS REQUIREMENTS ALLOWABLE VALUE 8.
Steam Generator 1 Level - Low 1.2 SR 3.3.1.1 2 20%
SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 9.
Steam Generator 2 Level - Low 1.2 SR 3.3.1.1 2 204 SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.13 10.
Reactor Coolant flow - Low (d) 1.2 SR 3.3.1.1 Ramp: s 0.231 psid/sec.
SR 3.3.1.7 Floor: 2 12.1 psid SR 3.3.1.9 Step: s 7.25 psid SR 3.3.1.12 SR 3.3.1.13 11.
Local Power Density - High(d) 1.2 SR 3.3.1.1 s21.0kW/ft SR 3.3.1.3 SR 3.3.1.4 SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 j
SR 3.3.1.13 12.
Departure From Nuc(l ate Boiling 1.2 SR 3.3.1.1
> 1.31 Ratio (DNBR) - Low SR 3.3.1.2 SR 3.3.1.3 SR 3.3.1.4 SR 3.3.1.5 SR 3.3.1.7 SR 3.3.1.9 SR 3.3.1.10 SR 3.3.1.11 SR 3.3.1.12 SR 3.3.1.13 (d) Trip may be bypassed when logarithmic power is < 1E.4% RTP. Bypass shall be automatically removed when logarithmic power is a 1E-4% RTP. During testing pursuant to LCO 3.1.12. trip may be bypassed below 5% RTP.
Bypass shall be automatically removed when logarithmic power is a 5% RTP.
SAN ON0FRE--UNIT 3 3.3-9 Amendment No. 116