ML20096D667
| ML20096D667 | |
| Person / Time | |
|---|---|
| Site: | Three Mile Island  |
| Issue date: | 12/21/1995 |
| From: | GENERAL PUBLIC UTILITIES CORP. |
| To: | |
| Shared Package | |
| ML20096D620 | List: |
| References | |
| NUDOCS 9601190216 | |
| Download: ML20096D667 (80) | |
Text
!
FORM NIS-1 OWNERS' DATA REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules Metropolitan Edison Company l
- 1. Owner 2800 Pottsville Pike, Reading, Pennsylvania !
ThreeMileIslandNuIffa*r*"deIer'aY[nht'a' tion-
- 2. Plang Route 441 South, Middletown, Pennsylvania (Name and Address of Plant)
- 3. Plant Unit Unit 1 4. Owner Certificate of Authorization (if required) NA
- 5. Commercial Service Date 09/02/74 6. National Board Number for Unit Reactor Vessel N-109 l
- 7. Components inspected See Table 1 Manufacturer Component or Manufacturer or Installer State or National Appurtenance or installer Serial No. Province No. Board No.
N l N :
N N
N ,
N ' .
l N/A L i
+.
i..
~
\ .s
\
\
w
\
N l
Note: Supplemental sheets in form of lists, sketches, or drawings may be used provided (1) size is 8% in. x 11 in., i (2) information in items 1 through 6 on this data report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
This form (E00029) rnay be obtained from the Order Dept., ASME, 345 E. 47th St., New York, N.Y. 10017 f 1'
9601190216 960111 PDR ADOCK 05000219 G PDR l
f FORM NIS-1 (back) f l
l from _1991 -to _2001
- 9. Inspection Interva
- 8. Examination Dates _10-17-93 __ to _10-11-95 i t s of work required
- 10. Abstract of Examinations. Include a list of examinations and a statement concern ng st for current interval. See Table 1.
Interval are approximately 49% complete.
- 11. Abstract of Conditions Noted See Table 2
- 12. Abstract of Corrective Measures Recommended and Taken See Table 2 d corrective mea-We certify that the statements made in this report are correct and the examinations an sures taken conform to the rules of the ASME Code,Section XI.
2L 19 Sf__ Signed RM NO WUy /
Date __ DEA Owner NA NA _ Expiration Date _
Certificate of Authorization No. (if applicable)
CERTIFICATE OF INSERVICE INSPECTION l d Pressure Vessel 1 Co.
1, the undersigned, holding a valid commission issued by the National Board of Boi er an_ a Inspectors and/or the State or Province of __ PAhave inspected the components described in MMIEceb . CT _ to _jo
- H*9 5 _. and state that to the best of my knowledge and belief, the Owner in accordance 10-8143 has performed examinations and taken corrective measures described in this Owners' Da:a with the requirements of the ASME Code,Section XI. d or implied, By signing this certificate neither the inspector nor his employer makes any warranty, expre concerning the exa:ninations and corrective measures fdescribed inlinjury t or property damage neither the inspector nor his employer shall be liable in any manner or any persona or a loss of any kind arising from or connected with this inspection.
Date D3D oll 19 Y N 4 6D O bl.hN) PA 1887
_ Commissions National Board, State Province and No.
/ Inspector's Sign 3ure
FORM NIS 1 (back)
- 8. Examination Dates 10-17-93 to 10-11-95 9. Inspection Interval from 1991 to 2001
- 10. Abstract of Examinations. Include a list of examinations and a statement concerning status of work required for current interval. See Table 1. The Inservice Inspections required for the Second Interval are approximately 49% complete.
- 11. Abstract of Conditions Noted See Table 2
- 12. Abstract of Corrective Measures Recommended and Taken See Table 2 We certify that the statements made in this report are correct and the examinations and corrective mea-sures taken conform to the rules of the ASME Code,Section XI.
Date JE(., M 19 ST Signed RAM NOMMBy owner gf 67 Certificate of Authorization No. (if applicable) NA Expiration Date NA CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province of PA and employed b> Hartford Sigtam BoileroEhI Co.
4hetEpab. C7- have inspected the components described in this owners' Data Report during the period 10 -1"I 4 .3 to 10 - H 9 5 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners' Data Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owners' Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Date DJ tt oil 19 3,7,___,
Commissions N % 6D (1) (N) EA IS 8'I
/ Inspector's Sign (ture National Board, State, Province and No.
)
i
+
TABLE OF CONTENTS Form NIS-1 Owners Data Report 1 Page (2-Sided)
Terms and Definitions 3 Pages NIS-1 Table 1 (abstract of examinations) 19 Pages NIS-1 Table 1 (abstract of pressure testing examinations) 2 Pages NIS-1 Table 2 (abstract of corrective actions) 1 Page -
l NIS-2 Reports (documentation of repairs / replacements) 31 Pages (2-Sided) !
28 Reports ,
I l
e
% . . - - - ~ - .
i NIS-1 TERMS AND DEFINITIONS I. Explanation of Columnar Information A .- Exam No. - Provides a unique identification number for each examination generated.
B. Item No. - Provides the assigned item number per Section XI C. Exam Cat. - ProVides the assigned category number per Section XI.
D. Identification - Provides a unique identification for every component /subcomponent in the schedule. Tag number, suffix (when ,
used), and code are all used to make up a unique identification for all components.
- 1. Tao Number - This provides the highest level of identification for components.
- 2. Suffix - Major components such as a steam generator have to be broken down to a subcomponent level in order to identify such things as specific welds. Suffix provides this further breakdown if necessary.
- 3. Code - Provides the mechanical component code per Technical Functions procedure EP-035.
Several examples of identification are shown below:
1 Tao Number Suffix fd2dg RC-T 0001 RV-0012 Weld Identification t t Weld Number Component t for the Reactor for a Specific Code for Vessel (RV) Location on the RV Welds I
Tao Number Suffix CQ.dg RC-P-0001A 001MFM (See Note 1) Bolt Reactor Coolant t t Main Flange Component t Pump 1A Bolt 1 Code for Bolts Tao Number Suffix Code RC-0001 Wald Identification t t Not used for Component t for a nozzle items which are Code for to pipe weld not part of a Welds major component Note 1: M & Q is the designator used for Bolts and Nuts. l l
-. _.- - . - . . . . . . . . _ . . .. - - ._ ~ _ . - . - - - . . - . - .,- . ~_... _ .~ -.
t t
i E. ISI Isa==tric No. - Provides the drawing on which the component can !
be. located. l F. Syst. -
Provides an abbreviation for the system in which the component is located. See the listing below.
?
Abbreviation System i BS Reactor Building Spray '
CF Core Flood .
CO Condensate 1 1
DC Decay ' Heat Closed Cooling DH Decay Heat Removal I
EF Emergency Feedwater. i i
I HP Hydrogen Purge MS Main Steam '
t MG Make-up and Purification
{
i NS Nuclear Services Closed Cooling j RC Reactor Coolant ,
RR Reactor Building Emergency Cooling RW River Water -
G. Exam Meth - Lists the examination method applicable to each examination number. See the listing below.
VIS Visual examination i MT Magnetic particle examination P
PT Liquid penetrant examination A
RT Radiographic examination i UT Ultrasonic examination i I
h
--. . . . . . ~ . . . . - . . - . .- - . . - - . . -
1 H. Reason - Provides the reason that the component was examined.
ISI The examination was performed as part of normal inspection schedule required by IWB-2420, IWC-2420, IWD-2400, or,IWF-2420. ,
EXP The examination was performed as part of an expanded sample as required by IWB-2430, IWC-2430, IWD-2430, or IWF-2430.
FOL The examination was a follow up examination per IWB-2420, IWC-2420, or IWF-2420.
4 l
1 I
l l
\
NIS-1 OWNERS DATA REPORT FOR INSERVICE INSP M ION DATE: 12/20/95 PAG 2: 0001
- 1. OWNERS Metropolitan Edison Cotapany, 2000 Pottsv1110 Piks, Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE llR TABLE 1 ll IDENTIFICATION l l l l
l EXAM . l ASME l ASME TAG NUMBER NDE DATE/ FROM DIAM./l CAT l ITEM NOl SUFFIX CODE DESCRIPTION SYST lHETH REASON TO DIAM. l REMARKS B-B lB2.70 lMU-C-0001A MANIFOLD LONG SEAM MU lUT l 091595 4.000 lMU-1034L WELD WELD l LISI . 4.000 D-B B2.70 lMU-C-0001A MANIFOLD LONG SEAM WELD MU UT 091595 4.000 MU-1035L WELD ISI 4.000 092595 3-F B5.130 RC-0024BM PIPE TO PIPE WELD RC PT 28.000 WELD ISI 28.000 2-F B5.130 RC-0024BM PIPE TO PIPE WELD RC UT 092495 28.000 WELD ISI 28.000 B-F B5.140 '
MU-0907BM l VALVE TO SAFE END WELD MU PT 091395 2.5001 WELD ISI 2.500i S-F B5.140 MU-0908BM SAFE END TO NOZ2LE WELD MU PT 091395 3.5001 l WELD ISI 3.500l D-F l B5.140 RC-0186BM l SAFE END TO ELBOW WELD RC PT 092395 1.5001 l WELD ISI 1.5001 3-F B5.140 i RC-0252BM NO22LE TO SAFE END WELD RC PT 092395 1.500l WELD ISI 1.500 B-F .B5.140 RC-0253BM NOZZLE TO SAFE END WELD RC PT 092195 1.500 l WELD I ISI 1.500 B-F lB5.140 RC-0288BM SAFE END TO ELBOW WELD RC PT 093095 1.500 PSI OF NEW WELD.
1 ,
WELD PSI 1.500 l D-G-1 B6.10 iRC-T-0001 ' HEAD STUD AND NUT RC MT 092695 6.500 ITEM NO. B6.10 IS INDICATIVE OF THE RH-0021M&Q BOLT ISI REACTOR VESSEL CLOSURE HEAD NUTS.
B-G-1 B6.10 RC-T-0001 HEAD STUD AND NUT RC MT 092695 6.500 l
RH-0022M6Q BOLT ISI B-G-1lB6.10 RC-T-0001 HEAD STUD AND NUT RC MT '
092595 6.500 l l RH-0023MsQ BOLT ISI B-G-1lB6.10 RC-T-0001 HEAD STUD AND NUT RC MT 092595 6.500 RH-0024MsQ BOLT lISI B-G-1 B6.10 RC-T-0001 HEAD STUD AND NUT RC MT 092595 6.500 RH-0025M&Q BOLT ISI B-G-1 B6.10 RC-T-0001 HEAD STUD AND NUT 1 RC MT 092695 6.500 RH-0026M&Q BOLT ISI B-G-1 B6.10 1 RC-T-0001 HEAD STUD AND NUT RC MT 092695 6.500 RH-0027M&Q BOLT 'ISI B-G-1 B6.10 RC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 RH-0028M60 BOLT ISI B-C-1l'B6.10 RC-T-0001 l HEAD STUD AND NUT RC MT 092795 6.500 RH-0029M&Q BOLT l l lISI l l B-G-1 B6.10 RC-T-0001 l HEAD STUD AND NUT RC MT N092795 : 6.500l RH-0030M&O BOLT l ISI l B-G-1 B6.10 RC-T-0001 l HEAD STUD AND NUT RC MT 092795 6.500 l IRH-0031M&Q BOLT l .ISI l B-G-1lE6.10 lRC-T-0001 l HEAD STUD AND NUT l RC MT '0926951 6.500 l lRH-0032MsQ BOLT l l lISI l
NIS-1 OWitERS DATA REPORT FOR INSERVIC3 INSPECTION DATE: 12/20/95 PAGE: 0002
- 1. OWNER: Metropo11tst Ediron Company, 2000 Pottsv1110 Piks, .
I Reading, Pennsylvania
- 2. PLANT: Three Mlle Island Nuclear Generating Station- ;
Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1 7
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 ;
OUTAGE 11R TABLE 1 I
IDENTIFICATION l l EXAM ASME ASME TAG NUMBER NDE l DATE/ FROM DIAM./
CAT ITEM NO SUFFIX CODE DESCRIPTION SYST METHlREASON TO DIAM. REMARKS B-G-1lB6.10 lRC-T-0001 ' HEAD STUD AND NUT ] RC lMT 092695 6.500 l lRH-0033MsQ BOLT l ISI B-G-1: B6.10 l RC-T-0001 HEAD STUD AND NUT RC MT 092695 6.500 .
RH-0034M60 BOLT ISI i
092695 B-G-1 B6.10 RC-T-0001 NEAD STUD AND NUT RC MT 6.500 RH-0035MsQ BOLT LISI B-G-1 B6.10 RC-T-0001 HEAD STUD AND NUT RC MT '092795 6.500 ISI !
RH-0036M60 BOLT l B-G-1 B6.10 RC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 0 RH-0037Ms0 BOLT ISI G-C-1 B6.10 RC-T-0001 NEAD STUD AND NUT RC MT 092795 6.500 RH-003 ems 0 BOLT ISI ,
B-G-1 B6.10 RC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 RH-0039MsQ BOLT ISI [
B-G-1 ,B6.10 lRC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 RH-0040Ms0 BOLT ISI B-G-1 (B6.30 RC-T-0001 - HEAD STUD AND NUT RC MT 092695 6.500 ITEM NO. B6.30 IS INDICATIVE OF THE BOLT ISI REACTOR VESSEL STUDS, REMOVED. ,
RH-0021Ms0 '
B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092695 6.500 BOLT ISI f RH-0021Ms0 .
B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC MT 092695 6.500 RH-0022M60 BOLT : ISI B-G-1 B6.30 RC-T-0001 NEAD STUD AND NUT RC UT .092695 6.500 t RH-0022MsQ BOLT ISI B-G-1 B6.30 RC-T-0001 NEAD STUD AND NUT RC MT 092595 6.500 t RH-0023MsQ BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092695 6.500 RH-0023M60 BOLT ISI
- r B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC WT 092595 '
6.500 RH-0024MsQ BOLT ISI B-G-1 B6.30 '
RC-T-0001 HEAD STUD AND NUT RC UT 092695l 6.500
! RH-0024MsQ BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC MT 092595 6.500 RH-0025Ms0 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092695 6.500 t RH-0025Ms0 BOLT I ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC MT 092695 6.500 RH-0026Ms0 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092695 6.500 RH-0026Ms0 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD Am NUT RC MT 092695' 6.500 RH-0027M60 BOLT l ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC lUT l092695 6.500 lRH-0027MsQ BOLT l 1 l !ISI
[ )
MIS-1 OWNERS DATA E.EPORT FOR INSERVICE INSPECTION DATE: 12/20/95 PAGE: 0003
- 1. OMNER: Metropolitsa Editon CompaIy, 2000 Pottsville Pikh Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Statiora Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE llR TABLE 1 l IDENTIFICATION EXAM ASME ASME TAG NUMBER NDE DATE/ FROM DIAM./
CAT ITEM NO SUFFII CODE DESCRIPTION SYST METH REASON TO DIAM. REMARES B-G-1 B6.30 RC-T-0001 i HEAD STUD AND NUT RC MT 092795 6.5001 RH-0028MEQ BOLT ISI D-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092795 6.500 RH-0028M60 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092795 6.500 RH-0029MEQ BOLT ISI B-G-1 B6.30 lRC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 RH-0029M60 BOLT ISI B-G-1 B6.30 RC-T-0001 -
HEAD STUD AND NUT RC MT 092795 6.500 RH-0030M&Q BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092795 6.500 RM-0030MsQ BOLT ISI B-G-1 B6.30 RC-T-0001 NEAD STUD AND NUT RC MT 6.500 RH-0031M60 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092795 6.500 RH-0031M&O BOLT ISI B-G-1 B6.30 RC-T-0001 NEAD STUD AND NUT RC MT 092695 6.500 RH-0032M60 BOLT ISI B-G-1 l B6. 30 RC-T-0001 HEAD STUD AND NUT RC UT 092695 6.500 ll RH-0032Ms0 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT l RC MT 092695 6.500 RM-0033M&Q BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC tit 092695 6.500 RH-0033M&Q BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC MT 092695 6.500 RH-0034M&O BOLT ISI D-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092695 6.500 RH-0034M60 BOLT ISI D-C-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC Ifr 092695 6.500
- sdi-0035M6Q BOLT ISI B-G-1 B6.30 'RC-T-0001 HEAD STUD AND NUT RC UT 092695 6.500 RH-0035M60 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 RM-0036M&Q BOLT ISI D-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092795 6.500 RH-0036Ms0 BOLT l ISI D-G-1
- B6.30 RC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 RH-0037Ms0 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092795 6.500 RH-0037Ms0 BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC MT. 092795 6.500 RH-0038M6Q BOLT ISI B-G-l' B6.30 RC-T-0001 HEAD STUD AND NUT L RC UT 092795 6.500 l :RH-0038M&Q BOLT l ISI l l
CIS-1 OWNERS DATA REPORT FOR INSERVICE INSPECTION DATE: 12/20/95 PAGE: 0004
- 1. OWNERS Metropolitan Edison Company, 2000 Pottsville Pike, Reading, Pennsylvania
- 2. PLANTS Three Mlle Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNITS 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE llR TABLE 1 IDENTIFICATION EXAM ASME ASME TAG NUMBER NDE , DATE/ l FROM DIAM./
CAT l ITEM NO SUFFIX CODE DESCRIPTION SYST METH. REASON l TO DIAM. REMARKS D-C-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC MT 092795 6.500 RM-0039MsQ BOLT ISI B-G-1 B6.30 RC-T-0001 HEAD STUD AND NUT RC UT 092795 6.500 RH-0039H&Q BOLT ISI B-G-1 B6.30 RC-T-0001 . HEAD STUD AND NUT RC MT 092795 6.500 JRH-0040M&Q BOLT ISI 3-G-1 l B6. 3 0 [RC-T-0001 HEAD STUD AND NUT RC UT 092795:l 6.500 l lRH-0040M&Q BOLT ISI l B-G-l' B6.40 lRC-T-0001 FLANGE LIGAMENTS RC UT 100695 6.500 RH-0021F FLANGE ISI B-G-1 B6.40 RC '.*-0001 FLANGE LIGAMENTS RC UT 100695 6.500 RM-0023F FLANGE ISI 9-G-1 B6.40 RC-T-0001 FLANGE LIGAMENTS RC UT 100695 6.500 RH-0026F FLANGE ISI D-C-1 B6.40 RC-T-0001 FLANGE LIGAMENTS RC UT 100695 6.500 RH-0031F FLANGE ISI E-G-1 B6.40 RC-T-0001 FLANGE LIGAMENTS RC UT 100695 6.500 RH-0036F FLANGE :ISI B-G-1 B6.40 RC-T-0001 FLANCE LIGAMENTS RC UT 100695 6.500 l RH-0039F FLANGR ISI l B-G-llB6.40 RC-T-0001 FLANGE LIGAMENTS RC UT 100695 6.500 RH-0040F FLANGE ISI RC [vIS 092595 2-G-1 B6.50 .RC-T-0001 SPHERICAL WASHERS 6.500 RH-0021W BOLT l ISI "
RC lVIS D-C-1 B6.50 RC-T-0001 SHPERICAL WASHERS 092595 6.500 RH-0022W BOLT l ISI B-G-1 B6.50 BC-T-0001 SHPERICAL WASHERS RC VIS 092595 6.500 RH-0023W BOLT ISI B-G-1 B6.50 RC-T-0001 SPHERICAL WASHERS RC - VIS 092595 6.500 RH-0024W BOLT ISI B-G-1 B6.50 RC-T-0001 SPHERICAL WASHERS RC VIS 092595 6.500 RH-0025W BOLT ISI B-G-1 B6.50 RC-T-0001 SPHERICAL WASHERS RC VIS 092595 6.500 RH-0026W BOLT ISI B-C-1 'B6.50 RC-T-0001 SPHERICAL WASHERS RC I VIS 092695 6.500 RH-0027W BOLT l ISI.
B-G-1lB6.50 RC-T-0001 l SPHERICAL WASHERS RC VIS '
092795 6.500 l RH-0028W BOLT l ISI B-G-1 B6.50 lRC-T-0001 ' SPHERICAL WASHERS RC VIS 092795 6.500 lRH-0029W BOLT ISI B-G-1 B6.50 lRC-T-0001 SPHERICAL WASHERS RC lVIS 092795 6.500 lj lRH-0030W BOLT ISI B-C-1]B6.50 lRC-T-0001 SPHERICAL WASHERS i RC VIS 092795! 6.500 i
l lRH-0031W BOLT ll ll l ISI l
~
l i
NIS-1 OWNERS DATA REPORT FC3 INSERVICE INSPCCTION DAT::: 12/20/95 PAGE: 0005
! 1. OWNER: Netropolitan Edison Company, 2000 Pottsville Pike, i Reading, Pennsylvania
- 2. PLANT: Three Mlle Island Nuclear Generating Station l- Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None t
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT Reactor Vessel N-109 OUTAGE llR TABLR 1 i
IDENTIFICATION I EXAM ASME ASME TAG NUMBER NDE , DATE/ FROM DIAM./
CAT ITEM NO SUFFIX CODE DESCRIPTION "SYST METH REASON TO DIAM. REMARKS D-G-1: B6.50 .
RC-T-0001 : SPHERICAL WASHERS l RC VIS 092695 6.500i RH-0032W BOLT I ISI B-G-1 B6.50 RC-T-0001 SPHERICAL WASHERS RC VIS - 092695 6.500 ,
i
( RN0033W BOLT ISI B-G-1 B6.50 RC-T-0001 SPHERICAL WASHERS RC VIS 092695 6.500 RH-0034W BOLT ISI B-G-1 B6.50 RC-T-0001 SPHERICAL WASHERS RC VIS 092795 6.500 g f
RH-0035W BOLT l lISI B-C-l ' B6.50 RC-T-0001 l SPHERICAL WASHERS RC VIS 092695 .
6.500 ,
RH-0036W BOLT l -
ISI l B-G-1 B6.50 RC-T-0001 SPHERICAL WASHERS RC VIS 092795 6.500 RH-0037W BOLT ISI B-G-1 ;B6.50 RC-T-0001 SPHERICAL WASHERS RC VIS 092795' 6.500 l RH-0038W BOLT 1 ISI B-G-llB6.50 RC-T-0001 SPHERICAL WASHERS RC VIS 092795 6.500 ;
I .
RH-0039W BOLT ISI B-G-1]B6.50 .
RC-T-0001 SPHERICAL WASHERS RC VIS 092795 6.500 l RH-0040W BOLT ISI B-G-2]B7.20 RC-T-0002 RC-RV-2 INLET FLANGE BOLT RC VIS 092295 1.125 PSI OF NEW BOLTING.
I RC-0274-BT FLANGE ING PSI B-G-21B7.30 RC-H-0001B LOWER PRIMARY HANDHOLE BO RC VIS 092895 2.000 PSI OF NEW BOLTING.
LPH-BT BLTNG LTING l PSI B-C-2 B7.50 lMU-0611BT FLANGE BOLTING MU VIS l 091895 i 1.120 .
B-G-2l B7.50 RC-P-0001B SEAL INJECTION FLANGE BOL RC .VIS : 091895 1.125 l ISI l MUO588BT FLANGE TING B-G-2 B7.60 RC-P-0001B LOWER SEAL HOUSING RC VIS 091195 .
2.000 PSI OF NEW BOLTING. ;
- LSHBT BLTNG PSI B-G-2 B7.60 RC-P-0001C LOWER SEAL NOUSING BOLTIN RC ' VIS 091995 4.500 lLSHBT BLTNG G ISI ,
l B-G-2lB7.70 CF-V-0005A HINGE PIN RETAINER BOLTS CF VIS 093095 14.000 PSI OF NEW HINGE PIN RETAINER BOLTS I
BOLT PSI '
B-G-2; B7.70 MU-V-Oll3 ,
MU-V-ll3 MU . VIS 050895 2.500 PSI OF NEW BOLTING.
BOLT BONNET BOLTING PSI B-G-2 B7.70 RC-V-0002 BONNET BOLTING RC VIS 091995 2.500 PSI OF NEW BOLTING.
BLTNG . PSI B-G-2' B7.80 RDU-0001 lFLANCE BOITING RC VIS 092095" 1.000 NINOR LEAKAGE REMAINS UNCHANGED '
B-G-2 'B7.80 RDU-0002 l FLANGE BOLTING RC VIS 090995 1.000 PSI OF NEW BOLTING.
1.000 B-G-2: B7.80 RDU-0003 . FLANGE BOLTING RC VIS ; 091595 l !
CRDM-003 FLANGE ISI B-G-2 B7.80 RDU-0003 FLANGE BOLTING RC VIS 052794 1.000 PSI OF NEW BOLTING. l
l
- - - - - - , , - - , - - - - ------:-,.------a- - - _ - - - - - - - - - _ . - - - - - _ _ , _ , _ , _ , , _ - , _ _ - . - - _ _ _ _ _
EIS-1 OWNERS DATA REPORT FOR INSERVICJ INSPECTION DATE: 12/20/95 PAGE: 0006 1 OWNER: MetropolltEn Edison Company, 2000 PottLvilla Pika, Reading Pennsylvania
- 2. PLA2rF Three Mile Island Nuclear Generating Station Ecute 441 South, Middletown, Pennsylvania
- 3. PLANT UNITS 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE llR TABLE 1 IDEN'?IFICATION l l l EXAM ASME ASME TAG RUMBER NDE DATE/ FROM DIAM./
CAT : ITEM NO SUF7IX CODE DESCRIPTION SYSTlMETH REASON TO DIAM. REMARKS D-C-2]B7.80 lRTU-0004 l FLANGE BOLTING l RC VIS l090995ll 1.000l PSI OF NEW BOLTING.
] lCADH-004 FLANGE l l l PSI l RC l VIS l091595 B-G-2lB7.80 l'ADU-0005 l FLANGE BOLTING 1.000 l !CRDM-005 FLANGE l ISI D-G-2lB7.80 lRDU-0006 jFLANGE BOLTING RC VIS 091595 1.000 l lCRDH-006 FLANGE l lISI D-G-2: B7.80 lRDU-0006 [ FLANGE BOLTING RC VIS 052794 1.000 PSI OF NEW BOLTING.
ICRDM-006 FLANGE l PSI B-G-2 B7.86 iRDU-0007 l FLANGE BOLTING RC VTS ' 090995 1.000 PSI OF NEW BOLTING.
l CRDH-007 FLANGE l lPS1 il B-G-2187.30 RDU-0008 FLANGE BOLTING l RC VIS 1090995 1.000 PSI OF NEW BOLTING.
CRDM-008 FLANGE PSI B-G-2 B"/ . 8 0 RDU-0009 FLANGE BOLTING RC VIS 090995 1.000 PSI OF NEW BOLTING.
CRDH-009 FLANGE PSI B-G-2lB7.80 RDU-0010 l FLANGE BOLTING RC VIS l 090995 1.000 PSI OF NEW BOLTING.
i ICRDH-010 FLANGE PSI B-G-2iB7.00 RDU-00ll FLANGE BOLTING , RC VIS 091595 1.000 CRDM-Oll FLANCE l ISI B-6-2 'B7.80 RDU-0012 FLANGE BOLTING l RC LVIS 091595 1.000 ;
CRDM-012 FLANGE l l .ISI l P-G-2 B7.80 RDU-0013 FLANGE BOLTING RC VIS 090995 l 1.000 PSI OF NEW BOLTING.
B-G-2 B7.80 RDU-0014 FLANGE BOLTING RC VIS 091595 l.000 CRDM-014 FLANGE ISI 091595 B-G-2 B7.80 RDU-0015 FLANGE BOLTING RC VIS 1.000 CRDM-015 FLANGE l ISI D-C-2 B7.80 RDU-0016 FLANGE BOLTING RC VIS 091595 1.000 CRDM-016 FLANGE ISI B-G-2 B7.80 RDU-0017 FLANGE BOLTING RC ,VIS 091595 1.000 lCRDM-017 FLANGE 1: ISI i B-G-21B7.80 lRDU-0018 l FLANGE BOLTING RC VIS ' 090995 .
1.000) PSI OF NEW BOLTING.
l lCRDM-018 FLANGE I PSI l B-G-2lB7.80 l RDU-0019 i FLANGE BOLTING l RC VIS 091595' l.000l l CRDM-019 FLANGE l ISI L l B-G-21B7.80 RDU-0020 FLANGE BOLTING l RC VIS .091595 1.000 MINOR LEAKAGE REMAINS UNCHANGED l CRDM-020 FLANGE l ISI FROM PREVIOUS DATA.
B-G-2 B7.80 RDU-0021 FLANGE BOLTING l RC VIS 091595 1.000 ' MINOR LEAKAGE REMAINS UNCHANGED CRDM-021 FLANGE i l ISI l FROM PREVIOUS DATA.
B-G-2 lB7.80 RDU-0022 FLANGE BOLTING l RC . VIS 091595 1.000 l lCRDM-022 FLANGE , l ilSI B-G-2lB7.80 lRDU-0023 l FLANGE BOLTING RC VIS 090995 1.000 PSI OF NEW BOLTING.
] lCRDM-023 FLANGE l PSI l B-G-2lB7.80 lRDU-0024 l FLANGE BOLTING RC .VIS ;0915951 1.000 :
l lCRDH-024 FLANGE l l lISI l l
NIS-1 OWNERS DATA REPORT FOR IECERVICE ILSPECTION DATE: 12/20/95 PAGE: 0007
- 1. ONueR Metrop'11 ten Edicen Coepany, 2810 Pottoapillo Pik3, Reading, Pennsylvania
- 2. PLANT: Three Mlle Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT Reactor Vessel N-109 OUTAGE llR TABLE 1 IDENTIFICATION EXAM ASME ASME TAG NUMBER NDE DATE/ FRdM DIAM./
CAT ITEM NO SUFFIX CODE DESCRIPTION SYST IMETH lR3!lASON I TO DIAM. REMARKS l
, B-G-2lB7.80 ]RDU-0025 FLANGE BOLTING RC l VIS 091595 1.0001 MINOR LEAKAGE REMAINS UNCNANGED l l lCRDM-025 FLANGE ISI FROM PREVIOUS DATA.
B-G-21B7.80 RDU-0026 FLANGE BOLTING RC VIS 090995 1.000 PSI OF NEW BOLTING. SEE TABLE 2.
l CRDM-026 FLANGE PSI B-G-2lB7.80 RDU-0027 FLANGE BOLTING RC VIS 091595: 1.000 l l CRDM-027 FLANGE ISI B-G-2lB7.80 ,RDU-0027 FLANGE BOLTIhG RC VIS 052794 1.000 PSI OF NEW BOLTING.
1 CRDM-027 FLANGE PSI B-G-2lB7.80 RDU-0028 FLANGE BOLTING RC VIS 091595 1.000 MINOR LEAKAGE REMAINS UNCHANGED l CRDM-028 FLANGE ISI FROM PREVIOUS DATA.
B-G-21B7.80 RDU-0029 FLANGE BOLTING RC VIS 09C995: 1.000' PSI OF NEW BOLTING.
CRDM-029 FLANGE PSI B-G-2 B7.80 RDU-0030 FLANGE BOLTING RC VIS 090995 1.000 PSI OF NEW BOLTING.
CRDM-030 FLANGE PSI B-G-2 B7.80 RDU-0031 FLANGE BOLTING RC VIS 092395 1.000 ; PSI CF NEW BOLTING.
VIS ' 092395 PSI OF NEW BOLTING. '
B-G-2lB7.60 RDU-0032 FLANGE BOLTING RC 1.000 CRDM-032 FLANGE PSI B-G-2 : B7.80 RDU-0033 FLANGE BOLTING RC VIS 091595 1.000 CRDM-033 FLANGE ISI B-C-2 B7.80 RDU-0034 FLANGE BOLTING RC l VIS 091595 1.000 (CRDM-034 FLANGE ISI B-G-2 B7.80 1RDU-0035 FLANGE BOLTING RC VIS 091595 1.000 l CRDM-035 FLANGE l ISI B-G-21B7.80 RDU-0036 FLANGE BOLTING RC VIS 091595 1.000 CRDM-036 FLANGE ISI B-G-2 B7.80 RDU-0037 FLANGE BOLTING RC VIS 092395 ,
1.000 PSI OF NEW BOLTING.
CRDM-037 FLANGE PSI B-G-2 B7.80 RDU-0038 FLANGE BOLTING RC VIS 091595 1.000 CRDM-038 FLANGE ISI B-G-2 B7.80 RDU-0039 FLANGE BOLTING kc VIS 092395 1.000 PSI OF NEW BOLTING.
ll CRDM-039 FLANGE PSI B-G-2LB7.80 RDU-0040 FLANGE BOLTING l RC VIS :092395 1.000 PSI OF NEW BOLTING.
CRDM-040 FLANGE , PSI VIS 091595 B-G-2 B7.80 RDU-0041 FLANGE BOLTING RC 1.000 CRDM-041 FLANGE ISI l' B-G-2 B7.80 RDU-0042 .
FLANGE BOLTING RC VIS 091595 1.000 CRDM-042 FLANGE ISI B-G-2lB7.80 RDU-0043 FLANGE BOLTING RC VIS ' 091595. 1.000 l CRDM-043 FLANGE "ISI B-G-2lB7.80 RDU-0044 FLANGE BOLTING RC VIS I092395 .
1.000 PSI OF NEW BOLTING.
CRDM-044 FLANGE PSI B-G-2 B7.80 RDU-0045 FLANGE BOLTING i RC VIS 0924951 1.000 PSI OF NEW BOLTING.
1:IS-1 OWNERS DATA REPORT FC3 INSERVICE INSPTTION DATE: 12/20/95 PAGE: 0008 !
- 1. OWNER: Metropolitan Edison Company, 2000 Pottsville Pike, Reading, Pennsylvania l
- 2. PLAlfF Three Mlle Island Nuclear Generating Station Doute 441 South, Middletown, Pennsylvania ;
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None '
- 5. C0000ERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT Reactor Vessel N-109 l OUTAGE llR ,
TABLE 1 [
t h
I l IDENTIFICATION I l EXAM I 1 '
ASME ASME . TAG NUMBER lNDE DATE/ FROM DIAM./
CAT ITEM NO SUFFIX CODE DESCRIPTION SYSTlMETH REASON TO DIAM. REMARKS
CRDM-0,46 FLANGE PSI B-G-2 B7.80 RDU-0047 FLANGE BOLTING RC VIS 092495 1.000 PSI OF NEW BOLTING. ;
CRDM-047 FLARIGE PSI ,
B-G-2 B7.80 RDU-0048 FLANGE BOLTIt0G RC VIS 092495 1.000 PSI OF NEW BOLTING.
CRDet-048 FLA30GE PSI }
, B-G-2 B7.80 RDU-0049 FLANGE BOLTING RC VIS 091595 1.000
B-G-2 B7.80 RDU-0050 FLANGE BOLTING RC VIS 092395 1.000 PSI OF NEW BOLTING.
B-G-2 B7.80 RDU-0051 FLANGE BOLTING RC VIS 091595 1.000 MIIGOR LEAKAGE REMAINS UIOCHAIGGED
B-G-2 B7.80 RDU-0051 FLANGE BOLTIIGG RC VIS 052794 1.000 PSI OF KEW BOLTING.
B-G-2 B7.80 RDU-0052 FLANGE BOLTING RC VIS 091595 1.000 mil 00R LEAKAGE REMAINS UIOCHABIGED CRDM-052 FLANGE ISI FROtt PREVIOUS DATA. :
B-G-2lB7.80 RDU-0053 FLANGE BOLTING RC VIS 092495 1.000 PSI OF NEW BOLTING. SEE TABLE 2. [
CRDM-053 FLA30GE PSI B-G-2 lB7.80 RDU-0054 FLANGE BOLTIIOG RC VIS 091595 1.000 mil 00R LEAKAGE RE00AIIGS UNCIIANGED CRDet-054 FLANGE ISI FROtt PREVIOUS DATA. 6 B-G-2 B7.80 RDU-0055 FLAIOGE BOLTING RC VIS 092395 1.000 PSI OF NEW BOLTIIOG. I PSI i CRDM-055 FLA30GE .
?
B-G-2 B7.80 RDU-0056 FLANGE BOLTING RC VIS 091595 1.000 CRDM-056 FLANGE ISI [
B-G-2 B7.80 RDU-0057 FLANGE BOLTING RC VIS 092395 1.000 PSI OF NEW BOLTING. !
B-G-2 B7.80 RDU-0058 FLANGE BOLTING RC VIS 091595' l.000 CRDM-058 FLANGE ISI B-G-2 B7.80 RDU-0059 FLANGE BOLTING RC VIS 091595 1.000 MIt00R LEAKAGE REMAINS UNCHANGED ,
CRDM-059 FLAIOGE ISI FROtt PREVIOUS DATA. ,
d B-G-2 B7.80 RDU-0060 FLANGE BOLTIt4G RC VIS 091595 1.000 MIIGOR LEAKAGE REMAINS UIOCHANGED ;
CRDM-060 FLANGE ISI FROtt PREVIOUS DATA. !
B-G-2 B7.80 RDU-0061 FLANGE BOLTING RC VIS 092395 -
1.000 PSI OF NEW BOLTING. SEE TABLE 2. (
FLANGE PSI i CRDM-061 B-G-2 B7.80 RDU-0062 FLANGE BOLTIIOG RC VIS 091595 1.000 [
i ;
CRDM-062 FLANGE ISI B-G-2 B7.80 lRDU-0063 FLA30GE BOLTING RC VIS 091595 1.000 - -
CRDM-063 FI.ANGE :ISI B-G-2 B7.80 .RDU-0064 : FLANGE BOLTING RC VIS 091595 1.000 CRDM-064 FLAT 0GB l ISI ^
B-G-2 B7.80 l RDU-0065 FLANGE BOLTIIGG RC LVIS 091595 1.000 llCRDM-065 FLANGE ISI ;
B-G-2 B7.80 lRDU-0066 FLAIOGE BOLTING RC VIS -
091595 1.000 ICRDM-066 rLANGE ISI I
i
- - - - - - - - - - - - , - - - - - - - ~ . - _ - -_ma_-_ -w
KIS-1 OWNERS DATA REPORT FOR INSERVICE INSPECTION DATE: 12/20/95 PAGE: 0009
- 1. OWNER: Metropolittn Editon Company, 2810 PottLv1113 Piko, Reading, Pennsylvania
- 2. PLAlef Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT Reactor Vessel N-109 OUTAGE llR TABLE 1 l IDENTIFICATION l l l Inu ASME ASME TAG NUMBER l NDE l DATE/ FROM DIAM./
CAT ITEM NO SUFFIX CODE l DESCRIPTION SYSTlMETH] REASON l. TO DIAM. REMARKS D-C-2 B7.80 lRDU-0067 FLANGE BOLTING l RC VIS '091595 . 1.000 lCRDM-067 FLANGE ISI D-C-2 B7.80 RDU-0068 FLANGE BOLTING RC VIS 091595 1.000 CRDM-068 FLANGE ISI B-G-2 B7.80 RDU-0069 FLANCE BOLTING RC VIS 091595 1.000 CRDM-069 FLANGE ISI 3-J B9.11 DH-0005 PIPE TO ELBOW WELD DH PT 091595 12.000 12.000 WELD ISI 3-J B9.11 : DH-0005 PIPE TO ELBOW WELD DH UT 091595 12.000 l
WELD . IISI 12.000 3-J IB9.ll ,DH-0009 IPIPE TO ELBOW WELD DH PT 091895 12.000 -
l WELD ISI 12.000 B-J lB9.ll l DH-0009 PIPE TO ELBOW WELD DH UT ! 091895 12.000 l WELD ISI 12.000 D-J lB9.ll RC-0014 PIPE TO NOZZLE WELD RC MT 091495 l 36.000 WELD ISI 36.000 B-J B9.11 RC-0014 PIPE TO NOZZLE WELD RC UT ' 091495 36.000 WELD ISI 36.000 B-J B9 ll RC-0046 ELBOW TO ELBOW WELD RC MT 092095 28.000 WELD ISI 28.000 3-J B9.11 RC-0046 ELBOW TO ELBOW WELD RC UT 092095 28.000 WELD ISI 28.000 B-J B9.ll SR-0001 PIPE TO ELBOW WELD RC PT 092095 10.000 WELD ISI 10.000 B-J B9.ll lSR-0001 PIPE TO ELBOW WELD RC UT 092095l 10.000 l WELD ISI i 10.000 B-J B9.12 RC-0135L INSIDE RADIUS LONG ELBOW RC MT 0918951 28.000 .
WELD WELD ISI l 28.000 l E-J B9.12 RC-0135L INSIDE RADIUS LONG ELBOW RC l UT 092095 28.000 WELD l WELD ISI 28.000 B-J B9.12 RC-0136L LOUTSIDE RADIUS LONG ELBOW RC MT 091895 28.000 WELD WELD ISI 28.000 E-J B9.12 RC-0136L OUTSIDE RADIUS LONG ELBOW RC - UT 092095 28.000 WELD WELD ISI 28.000 B-J B9.21 MU-Olll TEE TO REDUCER WELD MU PT 091395 -
2.500 WELD ISI ; 2.500' B-J IB9.21 1 HU-Oll3 ELBOW TO PIPE WELD MU PT 091395 2.500' l WELD ISI 2.500 D-J lB9.21 LMU-Olle PIPE TO ELBOW WELD MU PT 091335 2.500 l WELD i ISI 2.500 .
B-J 189.21 MU-0195 ELBOW TO PIPE WELD MU PT 091695 2.5001 l WELD ISI 2.500l B-J lB9.21 MU-0950 PIPE TO ELBOW WELD MU PT 091295 2.500l l l WELD ISI 2.5001
NIS-1 OWNERS DATA REPORT FOR INSERVICE I"SPECTION DATE: 12/20/95 PACE: 0010
- 1. OWNER: Metropolitan Edison Company, 2000 Pottsville Pike, Reading, Pennsylvania
- 2. PLAM: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLAlff UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE llR TABLE 1 IDENTIFICATION EXAM ASME ASME TAG NUMBER NDE DATE/ FROM DIAN./
CAT ' ITEM NO SUFFIX CODE DESCRIPTION ; SYST METH REASON! TO DIAM. REMARKS D-J l'B9.21 MU-0951 ELBOW TO PIPE WELD l MU PT !091695 l 2.500 WELD ISI 2.500 ,
B-J .B9.21 RC-0192 PIPE TO TEE WELD RC PT 092795 2.000 WELD , ISI 2.000 B-J B9.21 RC-0289 ELBOW TO PIPE WELD l RC PT 092895 2.000 PSI OF NEW WELD.
l WELD PSI 2.000 D-J B9.21 RC-0290 l PIPE TO PIPE WELD RC PT '1005951 2.000 PSI OF HEW WELD.
WELD l . PSI 2.000 E-J lB9.21 SP-0006 PIPE TO ELBOW WELD RC PT 091895 2.500 .
WELD 'ISI 2.500 B-J B9.21 'SP-0007 ELBOW TO PIPE WELD RC PT 091895 2.500 WELD l' ISI 2.500 B-J '
B9.21 .SP-00ll ELBOW TO PIPE WELD RC PT 092095 2.500 WELD ISI 2.500 3-J B9.32 RC-01128 NOZZLE BRANCH WELD RC MT 092095 28.000 l l WELD ISI 2.500 B-J iB9.40 MU-0582S PIPE TO ELBOW WELD ! MU PT 091895 1.500 l WELD l ISI 1.500 D-J lB9.40 "MU-0583S ELBOW TO PIPE WELD MU PT 091895 1.500 l l WELD ISI 1.500 B-J lB9.40 "MU-0584S PIPE TO ELBOW WELD MU PT l091895 1.500 l WELD ISI 1.500 B-J B9.40 HU-0585S ELBOW TO PIPE WELD MU PT 092095 1.500 WELD ISI 1.500 B-J 'B9.40 MU-0586S :
PIPE TO ELBOW WELD MU PT 092095l 1.5CO WELD .ISI i 1.500 B-J B9.40 'MU-0587S ELBOW TO PIPE WELD MU ' PT 092095 1.500 l WELD ISI 1.500 B-J B9.40 MU-0588S PIPE TO FLANGE WELD MU PT 091895 1.500 WELD ISI 1.500 B-J B9.40 lMU-0611S PIPE TO FLANGE WELD l MU PT 091995' 1.500 L WELD 1; ISI 1.500 B-J B9.40 MU-0612S FLANGE TO PIPE WELD MU PT 091995 1.500
- 1. WELD ISI l 1.500 3-J lB9.40 MU-0668S ELBOW TO PIPE WELD MU PT 0916951 1.500 l l WELD ISI l 1.500 D-J lB9.40 lMU-0669S PIPE TO ELBOW WELD MU PT . 091695 1.500 l l WELD ISI 1.500 5-J lB9.40 lMU-0670S ELBOW TO PIPE WELD MU PT 091695' l.500 l l WELD ISI 1.500 B-J lB9.40 MU-0671S PIPE TO ELBOW WELD MU PT 091695 1.500 .
WLLD ISI 1.500 -
B-J B9.40 MU-0672S TEE TO PIPE WELD MU PT 0916951 1.5001 l WELD i ISI l 1.500l
NIS-1 OWNERS DATA REPORT FOR INSERVICE INSPICTION DATE: 12/20/95 PAGE: 0011 *
- 1. ONNER: Mottopoliten Ediscn company, 2010 Pottsville Piks, Reading, Pennsylvania
- 2. PLANT: Three Mlle Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania ;
- 3. PLANT UNIT 1 ,
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None ,.
- 5. COpeumCIAL SERVICE DATE: 09/02/74 f
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE 11R '
TABLE 1 l
IDENTIFICATION <
EXAM l ASME ASME TAG NUMBER NDE DATE/ FROM DIAM./
CAT ITEM NO SUFFIX CODE DESCRIPTION SYST METH REASON TO DIAM. REMARKS l ,
I B-J B9.40 lMU-0673S TEE TO REDUCER WELD l MU PT 091695 1.500 I WELD l . ISI 1.500 -
i
)
B-J B9.40 lMU-0674S PIPE TO TEE WELD MU PT 091695 1.500 :
l WELD ISI 1.500 l 3-J l B9.40 MU-0675S ELBOW TO PIPE WELD MU PT 091695 1.500 WELD ISI 1.500 PT 091695 1.500 i B-J B9.40 :MU-0676S PIPE TO ELBOW WELD MU '
WELD ISI 1.500 B-J B9.40 MU-1407S PIPE TO TEE MU PT 091495 1.500 PSI OF NEW WELD.
WELD PSI 1.500 B-J B9.40 MU-1408S PIPE TO VALVE MU PT 090895 , 1.500 PSI OF NEW WELD.
WELD PSI 1.500 B-J 89.40 MU-1409S PIPE TO VALVE MU PT 090895 1.500 PSI OF NEW WELD. ,
WELD '
PSI 1.500 B-J B9.40 lMU-1410S l PIPE TO VALVE MU PT 091295 1.500 PSI OF NEW WELD.
WELD l PSI 1.500 B-J !B9.40 SP-0066S ELBOW TO PIPE WELD RC PT 092195 1.500
WELD .ISI 14.000 B-K-1 B10.10 CF-0091WA INTEGRAL ATTACHMENT WELD CF PT .091395 14.000 .
WELD ISI B-K-1 B10.10 CF-0092WA INTEGRAL ATTACHMENT WELD CF PT 091395 14.000 WELD , . ISI ['
j B-K-1 B10.10 CF-0093WA INTEGRAL ATTACHMESPF WELD CF PT 091395 14.000 ISI i WELD i B-K-1 B10.10 CF-0094WA INTEGRAL ATTACHMENT WELD CF PT 091395 14.000 ISI i WELD B-M-2 B12.50 ' CF-V-0005A CF-V-5A VALVE CF .VIS 092995 . 14.000 INTERIOR ISI [
INTER :
B-O B14.10 RDU-0003 BASE TO MOTOR TUBE WELD RC PT 060494 5.800 DISASSEMBLED DURING UNPLANNED CRD-0007 WELD ISI 4.200 OUTAGE IN THE 10TH OPERATING CYCLE. ;
RC PT 060494 4.200 DISASSEMBLED DURING UNPLANNED i B-O B14.10 RDU-0003 MOTOR TUBE N EXTENSION W
'CRD-0008 WELD l ELD ISI 4.200 OUTAGE IN THE 10TH OPERATING CYCLE. $
B-O B14.10 RDU-0003 / EXTENSION TO CAP WELD RC PT .060494 4.200 DISASSEMBLED DURING UNPLANNED CRD-0009 WELD ISI 4.200 , OUTAGE IN THE 10TH OPERATING CYCLE. ;
B-O B14.10 RDU-0006 BASE TO MOTOR TUBE WELD RC PT 060494 5.800 i DISASSEMBLED DURING UNPLANNED
- CRD-0016 WELD ISI 4.200 OUTAGE IN THE 10TH OPERATING CYCLE.
B-O B14.10 RDU-0006 MOTOR TUBE TO EXTENSION W RC PT 060494 4.200 DISASSEMBLED DURING UNPLANNED
- CRD-0017 WELD l ELD ISI 4.200 OUTAGE IN THE 10TH OPERATING CYCLE. 1 B-O B14.10 RDU-0006 l EXTENSION TO CAP WELD RC PT 060494 4.200 DISASSEMBLED DURING UNPLABEEED CRD-0018 WELD IISI 4.200 OUTAGE IN THE LOTH OPERATING CYCLE. l i
SG-0024 WELD l 1 lISI 151.000 .
L
.. . . m
'~
MIS-1 OWNER 3 DATA REPORT FOR INSERVIC3 IN2PECTION DATE: 12/23/95 PAGE: 0312
- 1. ONNER: Metropolitan Belson Company, .2000 Pottsville Pike, Reading, Pennsylvania '
- 2. PLANT: Three M11e Island Nuclear Generating Station i Route 441 South, Middletown, Pennsylvania 7
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION -(if required): None j
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 ;
i OUTAGE 11R TABLE 1 IDENTIFICATION l l l EXAM t
ASME ASME TAG NUMBER NDE DATE/ FROM DIAN./
CAT ITEM NO ; SUFFIX CODE l DESCRIPTION ,8YST METH REASON. TO DIAM. REMABES [
! I C-C C3.20 l DH-0154WA INTEGRAL ATTACHMENT WELD DH PT 090495' 14.0001
- WELD ISI 14.000 C-C C3.20 DH-0155WA INTEGRAL ATTACHMENT WELD DH PT 090495 14.000 t ISI l i WELD i C-C C3.20 DH-0489WA INTEGRAL ATTACHMENT WELD DH PT 091695 12.000 WELD ISI C-C C3.20 FW-0126WA ' INTEGRAL ATTACHMENT WELD FW MT 092295 14.000 i f ISI WELD l
! C-C C3.20 FW-0127WA INTEGRAL ATTACHMENT WELD FW MT 092295 14.000 t l WELD ISI I
C-C C3.20 FW-0178WA l INTEGRAL ATTACHMENT WELD FW MT 092195 20.000 "
WELD ISI I
C-C C3.20 FW-0179WA INTEGRAL ATTACHMENT WELD FW MT 092195 20.000 t WELD ISI .
C-C C3.20 lFW-0100WA INTEGRAL ATTACHMENT WELD FW MT 092195 20.000 ;
I WELD ISI C-C C3.20 FW-0181WA : INTEGRAL ATTACHMENT WELD FW MT 092195 20.000 WELD ,
ISI C-C C3.20 FW-0238WA INTEGRAL ATTACHMENT WELD FW NT 090495 20.000 t WELD ISI [
C-C C3.20 MS-0273WA INTEGRAL ATTACHMENT WELD MS NT 091595 24.000 WELD ISI l C-C !
C3.20 MS-0274WA INTEGRAL ATTACHMENT WELD MS NT- 0915951 24.000 .
WELD ISI .
MS NT 091595 24.000 f C-C C3.20 MS-0275WA INTEGRAL ATTACHMENT WELD ?
WELD ISI .
C-C C3.20 MS-0276WA INTEGRAL ATTACHMENT WELD MS MT 091595 24.000 ISI l l WELD MS MT 091595 24.000 i j C-C C3.20 MS-0277WA INTEGRAL ATTACHMENT WELD I WELD : ISI [
24.000 C-C 'C3.20 lMS-0278WA INTEGRAL ATTACHMENT WELD MS NT 091595 WELD ISI , .
C-C C3.20 MS-0279WA INTEGRAL ATTACHMENT WELD . MS NT 091595 . 24.000 [
i !
WELD .
I ISI C-C C3.20 MS-0280WA INTEGRAL ATTACHMENT WELD MS NT. 091595 24.000 .
j WELD ISI (
C-C C3.20 MS-0281WA INTEGRAL ATTACHMENT WELD MS NT 090595 24.000
- WELD ISI INTEGRAL ATTACHMENT WELD MS NT 091595 24.000 (
C-C C3.20 MS-0282WA WELD ISI [
C-C lC3.20 MU-1383WA INTEGRAL ATTACHMENT WELD l MU '
PT .092195 2.500 WELD ISI' l l l l i C-C lC3.20 lRR-0248WA INTEGRAL ATTACHMENT WELD RR MT 091595 12.000 l l WELD ISI [
_ . - . - - . - - . _ _ . _ - . . . _ ~ - - . , - -- _ . . _ . - _ - - . - _ . _ . . - _ - _ _ _ _ . _ _ _ _ _ . _ - . _ _ . . - - _ - _ - - _ _._ _ _ -- ._--.___x- w- ,- -_ - - ~ _ - . - - - ~ ~ < . - - - , . , . , ,, ...--n.--e<
CIS-1 OWNERS DATA REPORT FOR INSERVICE INIPECTION DATE: 12/20/95 PAGE: 0013
- 1. OWNER: Metropolit a Ed10on Company, 2800 Pottavillo Pik3, Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIIATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor vessel N-109 OUTAGE llR TABLE 1 IDENTIFICATION l l EXAM l ASME ASME TAG NUMBER NDE DATE/l FROM DIAM./
ITEM NO SUFFIX CODE DESCRIPTION SYST METH : REASON I TO DIAM. REMARKS CAT 1C3.20 RR-0249WA INTEC5tAL ATTACHMENT WELD RR MT 091995 12.000 C-C ISI WELD C-E-1 C2.05 DH-0019WA INTEGRAL ATTACHMENT WELD DH PT 090495 14.000 CONDITION REMAINS UNCHANGED FROM WELD FOL PREVIOUS DATA.
C- F-l ' C5.ll LBS-0004 PIPE TO FLANGE e BS-P-1A BS l PT 090795 10.000 WELD WELD ISI 10.000 C-F-1 C5.11 BS-0004 PIPE TO FLANGE 6 BS-P-1A BS ' UT 091195 10.000 WELD LWELD l ISI l 10.000 C-F-1 C5.11 BS-0015 ITEE TO PIPE FOR BS-P-1A BS UT [090795 10.000 WELD WELD ISI 10.000 C-F-1 C5.ll BS-0015 TEE TO PIPE FOR BS-P-1A BS PT 090795 10.000 WELD WELD ISI 10.000 i C-F-1 C5.11 BS-0080 ELBOW TO PIPE TO BS-V-60A BS UT 090495' 6.000 WELD WELD ISI 6.000 C-F-1 C5.11 .
BS-0080 ELBOW TO PIPE TO BS-V-60A BS PT 090495 6.000 WELD WELD ISI 6.000 C-F-1 C5.11 DH-0057 VALVE TO PIPE WELD DH PT 091595 12.000 1 WELD ISI 12.000 C-F-1lC5.11 DH-0057 VALVE TO PIPE WELD DH UT 091595 12.000
'I WELD ISI 12.000 C-F-1 C5.ll DH-0103 PIPE TO VALVE WELD DH PT 082595: 10.000 WELD lISI 10.000 .
C-F-1 C5.11 DH-0103 PIPE TO VALVE WELD DH UT 082595 10.000 WELD ISI 10.000 C-F-1 C5.11 MU-0970 ELBOW TO PIPE WELD MU l PT 082395 6.000 WELD ISI 6.000 C-F-1 C5.11 MU-0970 ELBOW TO PIPE WELD MU UT 082995 6.000 WELD IISI 6.000 C-F-1 C5.21 MU-1078 ELBOl4 TO PIPE WELD MU PT l090695 2.500 WELD ISI 2.500 C-F-1 C5.21 MU-1078 ELBOW TO PIPE WELD MU UT 090695 2.500 WELD ISI 2.500 C-F-1 C5.21 lMU-1095 PIPE TO ELBOW WELD MU PT 082395 4.000 l WELD I ISI 4.000 C-F-llc 5.21 lMU-1095 l PIPE TO ELBOW WELD MU UT 082995 4.000 l l WELD 1 ISI 4.000 C-F-1lC5.21 lMU-1331 l PIPE TO FLOW ELEMENT WELD MU PT 082995 2.000 l l WELD lISI 2.000.
C-F-1lC5.21 IMU-1331 PIPE TO FLOW ELEMENT WELD MU UT ' 082895 2.000' l l WELD ISI 2.000 C-F-llc 5.30 IMU-1319S PIPE TO ELBOW WELD MU PT 082395 2.000 l I WELD ISI 2.000 C-F-llc 5.41 lMU-1062B l PIPE TO WELD-O-LET WELD l MU IPT 082995! 4.000 l l WELD l l l ISI 2.500
. 4 -
IIIS-1 OWNERS DATA EEPORT FOR I! SERVICE INSPECTION DATE: 12/20/95 PAGE: 0014
- 1. OWNER: Metropolitan Edison Coupeny, 2500 Pottsville Pike, Reading, Pennsylvania i
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNITS 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None i
- 5. COIGIERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE llR TABLE 1 1 IDENTIFICATION EXAM ASME ASME TAG NUMBER NDE DATE/ ' FROM DIAM./
CAT ITEM NO SUFFIX CODE DESCRIPTION SYST' METH REASON TO DIAM. l REMARES C-F-2lC5.51 llEF-0002 PIPE TO ELBOW WELD EF MT 092095 6.000
] WELD ISI 6.000 C-F-2 C5.51 EF-0002 PIPE TO ELBOW WELD EF UT 092095 6.000 WELD ISI 6.000 C-F-2 C5.51 EF-0024 ELBOW TO PIPE WELD EP MT 091695 6.000 WELD ISI 6.000 i
C-F-2 l C5. 51 EF-0024 ELBOW TO PIPE WELD EF UT 091695 6.000 l WELD ISI 6.000 C-F-2 C5.51 091395 FW-0002 ELBOW TO ELBOW WELD FW MT 20.000 ,
WELD ISI 20.000 C-F-2 C5.51 FW-0002 ELBOW TO ELBOW WELD FW UT 091495 20.000 WELD ISI 20.000 C-F-2 C5.51 FW-0074 PIPE TO TEE WELD FW MT 092295 14.000 .
I WELD. ISI 14.000 C-F-2 C5.51 FW-0074 PIPE TO TEE WELD FW UT 092295 14.000
, WELD ISI 14.000 C-F-2 C5.51 MS-0001 PENETRATION TO PIPE WELD MS MT 091395 24.000 '
WELD ISI 24.000 C-F-2 C5.51 MS-0001 PENETRATIOII TO PIPE WELD MS UT 091395 24.000 WELD .ISI 24.000 091395 C-F-2 C5.51 MS-0002 ELBOW TO ELBOW WELD MS NT 24.000 WELD ISI 24.000 t
C-F-2 C5.51 MS-0002 ELBOW TO ELBOW WELD MS UT 091395 24.000 WELD ISI 24.000 C-F-2 C5.51 MS-0003 PENE* RATION TO ELBOW WELD MS MT 091395 24.000 WELD ISI 24.000 {
C-F-2 C5.51 MS-0003 PENETRATION TO ELBOW WELD MS UT 091395 24.000 WELD ISI 24.000 C-F-2 C5.51 MS-0067 NOZZLE TO ELBOW WELD MS MT 092195 24.000 SEE TABLE 2.
WELD ISI 24.000 C-F-2 C5.51 MS-0067 NO22LE TO ELBOW WELD MS UT 092195 24.000 ,
WELD ISI 24.000 C-F-2 C5.51 MS-0166 WELD-O-LET TO FLANGE WELD MS RT 091595 6.000 SEE TABLE 2. ;
WELD .ISI . 6.000 t C-F-2 C5.51 RR-0044 PIPE TO ELBOW WELD RR MT 083195 l 12.000 SEE TABLE 2.
' l WELD ISI 12.000 C-F-2?C5.51 RR-0044 PIPE TO ELBOW WELD RR- UT l 090195 12.000 L UELD ,ISI 12.000 PIPE TO PENETRATION WFLD 090495l 12.000 i C-F-2 C5.51 RR-0054 RR MT e WELD ISI 12.000 l C-F-2; C5.51 RR-0054 PIPE TO PENETRATION WELD RR UT 090495 12.000 :
WELD ISI 12.000 C-F-2 C5.51 RR-0206 PIPE TO ELBOW WELD RR MT 091695 12.000 l WELD i l ISI 12.000 l f
i
- _ . . _ . . . . . . . - . . . . - - - _ - - - _ - - . _ _ _ . . - _ . - - _ . _ - - _ . _ _ _ _ _ - - . - - , - - - +- - - ~ . - - w -, we , - . -o.,,,.w-~ e~- - v., . , e-- v-n- , , e -, . -
NIS-1 OWNERS DATA REPCUT FOR INSERVICE IESPECTION DATE: 12/20/95 PAGE: 0015
- 1. OWNER: Metropolitan Edison company, 2800 Pottsville Pike, Reading Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE 11R TABLE 1 IDENTIFICATION l ll l EXAM ASME ASME TAG NUMBER NDE l DATE/ , FROM DIAM./ .
CAT : ITEM NOISUFFIX CODE DESCRIPTION : SYST METHlREASONl TO DIAM. REMARES C-F-2 C5.51 lRR-0206 PIPE TO ELBOW WELD RR UT ,10918951 12.000 l WELD ISI 12.000 C-F-2' C5.51 lRR-0224 PIPE TO ELBOW WELD RR MT 091895 12.000 WELD ISI 12.000 l C-F-2l C5.51 RR-0224 PIPE TO ELBOW WELD RR UT : 091895 12.000 WELD ISI 12.000 C-5-2 C5.52 MS-0004L ELBOW LONG SEAM WELD MS MT 091395 24.000 WELD ISI 24.000 C-F-2l C5.52 MS-0004L ELBOW LONG SEAM WELD MS UT 091395 . 24.000 WELD i ISI 24.0001 C-F-2 C5.81 'RR-0140B lWELD-O-LET BRANCH WELD RR MT 091595 12.0001 l WELD l ISI 6.000 D-B D2.20 'NSE-0023 l INTEGRAL ATTACHMENT WELD NS VIS 082295 18.000
'WA WELD ISI D-B D2.20 NSH-0040 INTEGRAL ATTACHMENT WELD NS VIS 082495 12.000 WA WELD ,
ISI D-B D2.20 NSH-015. INTEGRAL ATTACHMEW NS lVIS 092395 . 6.000 y
WA WELD l ISI D-B D2.20 RWE-0005A l IMEGRAL ATTACHMENT WELD RW VIS 083195 24.000 WA WELD ISI F-A F1.10 CF-0006 CORE FLOOD CF VIS 091395 14.000 SUPORT RIGID SUPPORT ISI F-A F1.10 CF-0007 CORE FLOOD IN CF VLV RM CF VIS 011394 14.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER . PSI F-A F1.10 l DH-0004 l DH IN SEC SHLD SW EL302 l DH ,VIS 091395 12.000 CONDITION REMAINS UNCHANGED FROM l SUPORT l HYDRAULIC SNUBBER FOL PREVIOUS DATA.
F-A F1.10 DH-0005 DH IN SEC SMLD SW EL304 DH VI$ 100295 12.000 SUPORT HYDRAULIC SNUBBER PSI F-A F1.10 : MUE-0039 MU A D-RING A COLD LG HPI MU VIS 091495 2.500 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI MU B D-RING N RC-P-1C VIS : 091395 6
F-A F1.10 MUE-0043 MU SUPORT HYDRAULIC SNUBBER lISI 2.500'l F-A F1.10 MUE-0044 1 MU B D-RING NE RC-P-1C MU VIS 091695 2.500 PSI OF SPARE SNUBSER.
! SUPORT l HYDRAULIC SNUBBER PSI F-A F1.10 l MUH-0061 l MAKEUP MU llv1S 091595 2.500l l l SUPORT lUBOLT 1. LISI F-A l F1.10 lMUH-0212 MAKEUP MU .VIS 091295 2.500 l '
l* SUPORT lUBOLT ISI l l
F-A .
F1.10 lMUH-0223 MAKEUP MU ,VIS 091295 2.500 SEE TABLE 2.
i l l SUPORT RIGID SUPPORT 'ISI l
F-A F1.10 lMUH-0224 MAKEUP MU ;VIS 1100495 2.500 l SUPORT UBOLT 'EXP
( MU l
VIS 1091295 2.500 l l F-A F1.10 lMUH-0228 l MAKEUP l l SUPORT l RIGID SUPPORT jISI l I
1
NIS-1 OWNERS DATA REPCRT FC1 INSERVICE INSPLCTION DATE: 12/20/95 PACE: 0016
- 1. OWNER: Metropolittn Ediron Company, 2803 Pottsvillo Piks, Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT Reactor Vessel N-109 OUTAGE llR TABLE 1 l IDENTIFICATION l l I
EXAM ASME ASME TAG NUMBER NDE DATE/ FROM DIAM./,
CAT : ITEM NOISUFFIX CODE DESCRIPTION SYST METHl REASON TO DIAM. REMARKS F-A F1.10 lMUH-0242 MAKEUP MU VIS 091595 2.500 SUPORT GUIDE ISI F-A Fl.10 MU-0136-8 MAKEUP SUPPORT MU VIS 091495 1.500 l SUPORT GUIDE ISI F-A lF1.10 lMU-0139-3 MU A D-RING MU VIS 091495 1.500 CONDITION REMAINS UNCHANGED FROM SUPORT VARIABLE SUPPORT FOL PREVIOUS DATA.
F-A F1.10 MU-0140-1 MAKEUP SUPPORT MU VIS 091595 1.500 SUPORT ISI F-A F1.10 MU-0147-1 MAKEUP SUPPORT MU VIS 091495 1.500 l SUPORT I ISI F-A F1.10 MU-0149-1 MAKEUP SUPPORT MU VIS 1 091495 : 2.000 SUPORT ISI 091595 F-A F1.10 MU-0149-4 MAKEUP SUPPORT MU ,VIS 2.000 SUPORT ISI F-A F1.10 DH-0026 REACTOR COOLANT RC VIS 091295 1.500 SUPORT VARIABLE SUPPORT ISI F-A F1.10 DH-0032 RCS OUT SEC SHLD NE EL353 RC VIS l 091295 1.500 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI 091595 PSI OF SPARE SNUBBER.
F-A F1.10 RC-0006 i RC A D-RING NE PUMP 1A RC VIS 2.500 SUPORT HYDRAULIC SNUBBER PSI F-A F1.10 RC-0012 RC AUX SPRAY NE EL328 RC VIS 091495 2.500 SUPORT HYDRAULIC SNUBBER ISI F-A F1.10 RC-0014 RC AUX SPRAY NE EL321 RC VIS 091595 2.500 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.10 IRC-0019 PZR RELIEF PIPING RC VIS 091495 1 2.5001 PSI OF SPARE SNUBBER.
l SUPORT HYDRAULIC SNUBBER PSI F-A l F1.10 lRC-0023 PZR SPRAY PIPING RC VIS 091595 2.500 : PSI OF SPARE SNUBBER.
l l SUPORT ! HYDRAULIC SNUBBER PSI F-A lF1.10 lRC-0031-1 : REACTOR COOLANT SUPPORT RC VIS 093095 2.000 PSI OF MODIFIED SUPPORT.
l l SUPORT PSI F-A IF1.10 lRC-0032-3 REACTOR COOLANT SUPPORT RC VIS 093095 2.000 PSI OF MODIFIED SUPPORT.
l l SUPORT PSI l F-A IF1.10 lRC-0034-3 REACTOR COOLANT SUPPORT RC VIS 093095 2.000 PSI OF MODIFIED SUPPORT.
l l SUPORT PSI F-A lF1.10 lRC-0035-3 REACTOR COOLANT SUPPORT RC VIS 093095 2.000 PSI OF MODIFIED SUPPORT.
l SUPORT l PSI F-A F1.20 lBS-0014 R3 SPRAY BS-P-1A VAULT BS VIS 1090695 '
8.000 l SUPORT l VARIABLE SUPPORT l ISI F-A F1.20 SPSE-0003 BS-P-1A VAULT I BS VIS 022395 : 10.000 PSI OF SPARE SNUBBER.
I SUPORT HYDRAULIC SNUBBER PSI F-A lFL.20 SPSE-0009 BS-P-1B RM BS VIS 020995 10.000 PSI OF SPARE SNUBBER.
l l SUPORT HYDRAULIC SHUBBER l PSI F-A lF1.20 ISPSE-0010 BS-P-1B VAULT BS VIS 0202951 10.000 PSI OF SPARE SNUBBER.
l l SUPORT HYDRAULIC SNUBBER PSI l
NIS-1 OWNERS DATA REPORT FOR INSERVICE INSP30 TION DAT2: 12/20/95 PAGE: 0017
- 1. OWNER: Metropolitan Edison Company, 2800 Pottsville Pike.
Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 4-OUTAGE 11R TABLE 1 IDEtrFIFICATION EXAM ASME ASME TAG NUMBER NDE DATE/ FROM DIAM./
CAT ITEM NO:l SUFFIX CODE DESCRIPTION SYST METH REASON TO DIAM. REMARES F-A F1.20 SPSE-0011 BS-P-1B VAULT BS VIS 022394 10.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.20 ,DHH-0137 DH LINE FROM BWST DH VIS 082495 6.000 ,
' SUPORT ANCHOR ISI F-A Fl.20 DHH-0147 DH LINE FROM BWST DH VIS 090695 : 8.000 l
SUPORT UBOLT SUPPORT ISI F-A F1.20 '
DHH-0150 DH LINE FM BWST DH VIS 082495 8.000 SUPORT RIGID SUPPORT ISI F-A 'lF1.20 DHH-0196 DH DH-P-1B RM NW DH VIS 022394 14.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.20 DHH-0197 DH DH-P-1B RM W END DH VIS O21495 14.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.20 DHH-0198 DH DH-P-1B RM W END DH VIS 021495 14.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.20 DHH-0218 DH DH VIS 082495 10.000 SUPORT GUIDE ISI F-A F1.20 SPSE-0002 BS-P-1A SUCTION LINE DH VIS 022195 14.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.20 SPSE-0007 : DH DH-P-1B RM DH VIS 020295 14.000 PSI OF SPARE SNUBBER.
EMERGENCY FW EF VIS 090695 6.000 t SUPORT VARIABLE SUPPORT ISI F-A F1.20 EF-Oll6 EFW IN SEC SHLD SE EL330 EF VIS 091895 6.000 CONDITION REMAINS UNCHANGED FROM SUPORT HYDRAULIC SNUBBER FOL PREVIOUS DATA.
F-A F1.20 EF-0123 EFW EF VIS 091495 6.000 :
SUPORT RIGID SUPPORT ,
ISI F-A F1.20 W-0088 FW PEN 227 W VIS 092195 20.000 SUPORT VARIABLE SUPPORT EXP ,
F-A F1.20 FW-0089 FW DWNSTRM PEN 227 FW ' VIS 091995 20.000 SUPORT VARIABLE SUPPORT EXP F-A Fl.20 FW-0106 FW AREA 175 B D-RING FW iVIS 091895 14.000
, 1 SUPORT CON SUPPORT lISI '
F-A lFl.20 IW-0108 lFW OUT SEC SHLD NW EL320 FW VIS :091595 20.000 SEE TABLE 2.
l SUPORT lHYDRAULIC SNUBBER ISI F-A F1.20 lFW-Olli FW OUT SEC SHLD NW EL307 FW VIS 091695 20.000 PSI OF SPARE SNUBBER.
'l SUPORT HYDRAULIC SNUBBER PSI F-A lF1.20 FW-Oll2 FW OUT SEC SHLD EL308 FW VIS ' 092395 , 20.000 EXP SUPORT HYDRAULIC SNUBBER F-A F1.20 FW-0113 FW OUT SEC SHLD NW EL320 FW VIS LO92395 20.000 i SUPORT HYDRAULIC SNUBBER lEXP F-A lF1.20 MS-0072 l MAIN STEAM MS VIS 091495 8.000 l SUPORT l VARIABLE SUPPORT ISI F-A lF1.20 MS-0202 IMS OUT SEC SHLD NE EL337 MS VIS 0927951 24.000 PSI OF SPARE SNUBBER.
l SUPORT l HYDRAULIC SNUBBER PSI l l
_ _ _ _ _ - _ - _ _ _ _ _ - _ - _ _ _ _ _ - - - _ _ _ . - . _ - ~ , --
KIS-1 OWNERS DATA REPORT FOR INSERVICE INSPECTION DATE: 12/20/75 PAGE: 0018
- 1. ONNER: Metropo11tca Edison Company, 2000 Pottsvillo Pika, Reading, Pennsylvania
- 2. PLANT: Three Mlle Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT Reactor Vessel N-109 OUTAGE 11R TABLE 1 IDElffIFICATION l I 1 l l l
l l EIAM l ASME l ASME TAG NUMBER l NDE DATE/l 'FROM DIAM./
DESCRIPTION SYST'lMETH REASON l TO DIAM. REMARES CAT IITEM NO SUFFIX CODE I lMS AREA 185 NE EL337 MS VIS 092795 !
F-A lF1.20 MS-0203 ~
PSI l SUPORT l HYDRAULIC SNUBBER
';MS OUT SEC SHLD SE EL338 MS VIS 091295 24.000 PSI OF SPARE SNUBBER.
F-A lF1.20 MS-0205 SUPORT : HYDRAULIC SNUBBER PSI I MS-0208 MS OUT SEC SHLD NW EL338 MS VIS 092295 24.000 PSI OF SPASE SNUBBER.
F-A F1.20 SUPORT HYDRAULIC SNUBBER PSI MS-0209 lMS OUT SEC SHLD NW EL338 MS IVIS 092295 ; 24.000 ; PSI OF SPARE SNUBBER.
F-A lF1.20 PSI l l I SUPORT HYDRAULIC SNUBBER l MS OUT SEC SHLD NW EL338 MS ' VIS l 092295 l 24.0001 PSI OF SPARE SNUBBER.
F-A lF1.20 MS-0210 l PSI l l SUPORT : HYDRAULIC SNUBBER -
MS-0222 l MS-V-1B l MS VIS 1091495~ 24.0001 F-A lF1.20 l SUPORT HYDRAUITC SNUBBER l ISI l :l MS-V-1A l MS ;VIS 100295 24.000 PSI OF SPARE SNUBBER.
F-A IF1.20 MS-0223 l PSI I ! SUPORT HYDRAULIC SNUBBER MS AREA 161 MS CUBE C S I MS VIS 0911951 24.000 ' PSI OF SPARE SNUBBER.
F-A lF1.20 l MS-0230 l PSI I l ll SUPORT HYDRAULIC SNUBBER ,
MS IB EL 314 MS llVIS 091195 8.000 l PSI OF SPARE SNUBBER.
F-A lF1.20 IMS-0240 PSI I SUPORT HYDRAULIC SNUBBER MS-0243 MS IB EL 314- MS VIS 031395 8.000 PSI OF SPARE BNUBBER.
F-A lF1.20 PSI l
! l SUPORT HYDRAULIC SNUBBER l 1 MU DWNSTRM DH-V-7A MU VIS 090595l 6.0001 F-A lF1.20 lMUH-0001 ISI l l l SUPORT ' VARIABLE SUPPORT :
MU VALVE ALLEY MU ,VIS l090695 4.000L .
F-A lF1.20 lMUH-0027 l l SUPORT NHANGER I lISI I lMU-0055-5 MU VLV ALLEY MU LVIS l082495* 2.000 i SUPPORT PREVIOUSLY CORRECTED AND F-A lF1.20 ' FOL I- REMAINS IN SATISFACTORY CONDITION, l l SUPORT UBOLT l MU VLV ALLEY MU VIS l082495'; 2.000 SUPPORT PREVIOUSLY CORRECTED AND F-A lF1.20 lMU-0056-3 FOL , REMAINS IN SATISFACTORY CONDITION.
l l SUPORT lUBOLT MU VLV ALLEY MU ,VIS 082495 2.000l SUPPORT PREVIOUSLY CORRECTED AND ;
'IMU-0056-5 F-A F1.20 REMAINS IN SATISFACTORY CONDITION.
SUPORT UBOLT FOL RBE-0152 RBEC UPSTRM PEN 409 RR VIS '
091295 , 12.000 ,
F-A F1.20 SUPORT UBOLT ll i 11SI F1.20 RRH-0021 RBEC UPSTREAM PEN 410 RR VIS 083095 12.000 F-A ISI SUPORT . GUIDE VIS ! 082495 12.000 DCH-0056 l!DHCC DH-P-1B RM AREA 58 DC l F-A lF1.30 lISI l l SUPORT ll RIGID SUPPORT l 4 lNSCCW HEV N SIDE 110 l NS VIS l0830951 18.000 l F-A lF1.30 INSE-0016 lEXP L H l l SUPORT l RIGID SUPPORT lNSCCW HEV N SIDE 110 NS VIS l083095 1 18.0001 F-A lF1.30 lNSE-0017 JEXP l ,
l l SUPORT l RIGID SUPPORT NSCCW NW IC FLTR RM S 113 I NS VIS 082295 18.000l SEE TABLE 2.
F-A lF1.30 INSE-0023 l ISI 12.000l l l SUPORT RIGID SUPPORT l NSCCW NW IC FLTR RM S 113 l NS VIS 083095 18.0001 F-A lF1.30 lNSH-0037 EKP l l l SUPORT l VARIABLE SUPPORT l l 5
NIS-1 OWNERS DATA REPORT FOR INSERVICE INSPECTION
%q
- 1. OWNER: Metropolitan Edison Company, 2800 Pottsville Pike, 1 Reading, Pennsylvania -
- 2. PLANTe Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE llR TABLE 1 IDENTIFICATION .'l1 EXAM l ASME ASME TAG NUMBER NDE DATE/ FROM DIAM./ !
CAT ITEM NO lSUFFIK CODE DESCRIPTION SYST METH REASON TO DIAM. REMARKS l F-A lF1.30 NSH-0040 NSCCW UPSTRM NS-P-lC NS VIS 10822951 12.000 SUPORT GUIDE lISI F-A Fl.30 NSH-0158 NSCCW SW QUAD 183 NS VIS 091595 6.000 SUPORT UBOLT ISI F-A Fl.30 IPE-0001 RIVER WATER RW VIS 083195 16.000 l SUPORT l HYDRAULIC SNUBBER l l 'ISI l F-A lF1.30 RWE-0005A l RIVER WTR HEV S SIDE 111 RW IVIS l083195 1 24.000 l l SUPORT lUBOLT SUPPORT l lISI F-A lF1.40 DH-0033 lDH DH IVIS 091395 12.000 l SUPORT l RIGID RESTRAINT l ISI F-A F1.40 DH-0034 lDH IN SEC SHLD SW EL305 DH VIS 091695 '
SUPORT l HYDRAULIC SNUBBER PSI l F-A F1.40 EF-P-0001 .
EF-P-1 EF VIS 083095 :
SUPORT ANCHOR ISI F-A F1.40 EF-0002-1 .EF-V-19A EF VIS 083195 1.500 SUPORT lU-BOLT ISI F-A ;F1.40 i MS-0219 lMS-V-lc '
MS l VIS 092795 24.000 PSI OF SPARE SNUBBER.
l l SUPORT (HYDRAULIC SNUBBER l PSI F-A lF1.40 lMS-0220 MS-V-lD MS VIS 091295 24.000 ,
l SUPORT HYDRAULIC SNUBBER ISI F-A F1.40 lMS-0225 MS-V-1B MS VIS 092795 24.000 PSI OF SPARE SNUBBER.
l SUPORT HYDRAULIC SNUBBER PSI F-A F1.40 lMS-0227 :MS-V-lD HS VIS 092795 24.000 PSI OF SPARE SNUBBER.
I SUPORT l HYDRAULIC SNUBBER PSI F-A Fl.40 lMU-C0001A LETDOWN COOLER A MU VIS . 091495 -
SUPORT ANCHOR ISI F-A F1.40 NS-P-0001B NS-P-1B NS VIS 082495 SUPORT ANCHOR ISI F-A '
F1.40 RC-H-0001A UPPER LATERAL RESTRAINT RC VIS 091895 RC-HlA-3 SUPORT ,
ISI ,
F-A F1.40 RC-P-0001B RC SUPPORT (RING) l RC lVIS 0915951 RCP0001Bil SUPORT l ISI F-A F1.40 RC-P-0001B RC SUPPORT (RING) RC I VIS : 091195 RCP0001B4 SUPORT lISI F-A F1.40 RC-0008 RC TOP OF PRESSURIZER RC VIS ' 091495 2.500 ' PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER , PSI F-A Fl.40 RC-0016 1RC 9 RC-V-3 l RC iv1S 092795! 2.500 . PSI OF SPARE SNUBBER.
SUPORT l HYDRAULIC SNUBBER PSI F-A F1.40 RC-0017 lRC TOP PLTFM 8 PRESSURIZR RC VIS 032094 2.500 SUPORT l HYDRAULIC SNUBBER PSI F-A F1.40 NR-P-0001C lNR-P-lC RW .VIS 083195 ll l SUPORT l ANCHOR iISI
3:IS-1 OWNERS DATA REPORT FOR INSERVICE IEPECTION DATE: 12/20/95 PAGE: 0019
- 1. OWNER: Metropolitt,n Edison Coe%Q, 28I0 Potteville Piks, Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): None
- 5. COMMERCIAL SERVICE DATE: 09/02/74 f 6. NATIONAL BOARD NUMBER FOR UNIT: Reactor Vessel N-109 l
OUTAGE llR TABLE 1 IDENTIFICATION l EXAM ASME ASME TAG NUMBER NDE DATE/ FROM DIAM./
CAT ITEM NO SUFFIX CODE DESCRIPTION SYST METH REASON TO DIAM. REMARKS t
F-A '
F1.30 NSH-0040 NSCCW UPSTRM NS-P-lC NS ' VIS 082295L 12.000 SUPORT GUIDE ISI F-A F1.30 NSH-0158 NSCCW SW QUAD 183 NS VIS 091595' 6.000 SUPORT UBOLT ISI F-A F1.30 lIPE-0001 RIVER WATER RW VIS 083195 16.000 SUPORT HYDRAULIC SNUBBER ISI F-A F1.30 RWE-0005A RIVER WTR HEV S SIDE 111 RW LVIS 083195 24.0001 SUPORT UBOLT SUPPORT , ISI ;l F-A F1.40 DH-0033 DH DH VIS 091395 12.000:
SUPORT RIGID RESTRAINT ISI F-A Fl.40 DH-0034 DH IN SEC SHLD SW EL305 DH VIS 091695 12.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F .S Fl.40 EF-P-0001 EF-P-1 EF i VIS 083095 SUPORT ANCHOR ISI F-A F1.40 EF-0002-1 EF-V-19A EF VIS 083195 1.500 SUPORT U-BOLT ISI F-A F1.40 MS-0219 MS-V-lc MS VIS 092795 24.000 PSI OF SPARE SNUBBER.
l SUPORT HYDRAULIC SNUBBER PSI F-A lF1.40 MS-0220 MS-V-lD MS VIS 091295 24.000 ;
SUPORT HYDRAULIC SNUBBER ISI F-A F1.40 MS-0225 MS-V-1B MS VIS 092795' 24.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.40 MS-0227 MS-V-lD MS VIS 092795 24.000 PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.40 MU-C0001A LETDOWN COOLER A MU VIS 091495 SUPORT ANCHOR ISI F-A .Fl.40 NS-P-0001B NS-P-1B NS VIS 082495' SUPORT ANCHOR ISI F-A F1.40 RC-H-0001A UPPER LATERAL RESTRAINT RC VIS 091895 RC-H1A-3 SUPORT ISI F-A Fl.40 RC-P-0001B RC SUPPORT (RING) l RC ' VIS 091595 RCP0001Bil '
ISI SUPORT F-A F1.40 RC-P-0001B RC SUPPORT (RING) RC VIS : 091195 l RCP0001B4 SUPORT : ISI F-A :
F1.40 RC-0008 RC TOP OF PRESSURIZER RC VIS l 091495 2.500 l PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.40 RC-0016 ,RC $ RC-V-3 RC VIS l092795 2.500 l PSI OF SPARE SNUBBER.
SUPORT HYDRAULIC SNUBBER PSI F-A F1.40 RC-0017 RC TOP PLTFM $ PRESSURIZR RC VIS 032094 2.500 SUPORT HYDRAULIC SNUBBER PSI F-A l F1.40 lNR-P-0001C HR-P-lC RW VIS 083195 l l SUPORT ANCHOR LISI
NIS-1 OWIsERS DATA REPORT FOR INSERVICE INSPECTION DATE: 11/30/95 PAGE: 0020
- 1. OWNER: Metropotitan Edison Company, 2800 PottsvilLe, Pike Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION 0F AUTHORIZATION (if required): NONE
- 5. COMIERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NLMBER FOR UNIT: Reactor Vessel N-109 OUTAGE 11R TABLE 1
___ , , , r____7____, , ,
e e e a e g l l IDENTIFICATION l l l a a l EXAM l l l l l ,
ASME l ASME l TAG NUMBER l l NDE DATE/ FROM DIAN./ ,
le CAT l ITEM NO. l SUFFIX CODE I DESCRIPTION l SYSTEM a METHOD REASON TO DIAN. ! REMARKS
+. __ _ __ _ e.
e . .
VT-2 10-11-95 '
B-P B15.10 l SP-1303-8.1 IRC-T-0001 RC l NA l
>=>
l l I l 8 9 I
B-P B15.20 O
SP 1303-8.1 9
RC VT-2 10-11-95 l NA l l RC-T-0002 l' l l SP 1300-60 ISI L g e
~l I i i l i B-P !' B15.30 SP 1303-8.1 l RC-N-0001 A/B l RC VT-2 l 10-11-95 NA l j SP 1300-60 ISI ;
I e
I i
I l.
I I I i 1 B-P l B15.40 ' SP 1303-8.1 I Neat Exchangers ,I See ,'l VT-2 l 10-11-95 I NA I Systems include RC, DH, IRI, CF and l SP 1300-60 s' l Remarks l l ISI e CA
' I ! I I I I' I i i l i B-P B15.50 f SP 1303-8.1 fPiping See l VT-2 l 10-11-95 ! NA Systems include RC, DH, MU, CF and a e i Remarks ! l ISI l CA
' I l l l I I 1 I I I i i i i I I, SP 1303-8.1 l Pumps See VT-2 I 10-11-95 I, Systems include RC, DH, MU, CF and B-P l B15.60 l l NA l l e Remarks! ISI l !CA I i l I I i .I .I
. .i . .I ,
i B-P 815.70 SP 1303-8.1 l Valves l See l VT-2 l 10-11-95 l NA Systens include RC, DH, MU, CF and l '
e l Remarks a ISI l CA i
- i
- : .I
. l .i .i l .
CIS-1 OWNERS DATA REPORT FOR INSERVICE INSPECTION DATE: 11/30/95 PAGE: 0021
- 1. OWNER: Metropolitan Edison Company, 2800 Pottsville, Pike Reading, Pennsylvania
- 2. PLANT: Three Mile Island Nuclear Generating Station Route 441 South, Middletoesn, Pennsylvania
- 3. PLANT UNIT: 1
- 4. OWNER CERTIFICATION OF AUTHORIZATION (if required): NONE
- 5. CopeqERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOMto NUMBER FOR UNIT: Reactor Vessel N-109 OUTAGE 11R TABLE 1
_ _ _ _ _ _ , , , 7_ _ _ _ r _ _ _ _ , , ,
i . g i i i i l l IDENTIFICATION e ! I i i e exaa
! l ! l ASNE ASIE l TAG IRMBER l l ICE , DATE/ FROM DIAM./ ,
g CAT ITEM No. SUFFIX CODE l DESCRIPTION l NETH(B e REASON TO DIAM. e REMARKS l
, , 4__ SYSTEM +-__- -:
I t t t I B I t C-H e C7.10 8 SP 1300-6S CF VT-2 8 9-9-95 8 NA e .
l Pressure Vessels l l a e e e s- gsg a e i I 1 I I i
. . i. . . . .I .
I I I I, I .I, I i 9-6-95 i
.C-H l CT.30 l SP 1300-6V l Piping l See l VT-2 l ,i NA
! l l~ ISI l l Systems include RB, CA and IC
.l Remarks .s e
l i l i i i l l l
! !' SP 1300-6P l Piping DH VT-2 l-9-10-95 l' NA l'
! . ISI l e
- i >
i 1 I l i
.i .i i g .i g .I C-H C7.70 SP 1300-6V l Valves See l VT-2 , 9-9-95 NA l Systems include RS, CA and IC l Remarks! ISI g
i i !
I 1 1 '
e a e e e '
SP 1300-6P jValves l DH l VT-2 l 9-10-95 l NA 8 l l e e s e e e gSg e e 1 I I I i 1 1 I a e a e e e a SP 1300-65 l Valves 8 CF l VT-2 l 9-9-95 j NA l
l l
. . e . . . isi . ,
1 1 I I I I I i l l .
I i i i i i i I
. l l 1
NI3-1 OWNERS DATA REPORT FOR INSERVICO IO5PECTION DATE: 12/20/95 PAGE: 0001
- 1. OWNER: Metropolitan Edison Company, 2800 Pottsville Pike, Reading, Pennsylvania
- 2. PLANT: Three Mlle Island Nuclear Generating Station Route 441 South, Middletown, Pennsylvania
- 3. PLANT UNIT 1
- 4. OWNER CERTIFICATION OF AUTHORIEATION (if required): EMne
- 5. COMMERCIAL SERVICE DATE: 09/02/74
- 6. NATIONAL BOARD NUMBER FOR UNIT Reactor Vessel N-109 OUTAGE llR TABLE 2 IDENTIFICATION EXAM ASME ASME TAG NUMBER NDE NO. l CAT . ITEM NO SUFFIX CODE DESCRIPTION SYS METH UNACCEPTABLE INDICATION AND DISPOSITION 000006396 .B-G-2 B7.80 RDU-0026 FLANGE BOLTING RC l VIS LEAKAGE AT FLANGE NECESSITATE 7 INSTALLATION OF CRDM-026 FLANGE NEW NUTRINGS/ BOLTS.
000006450 lB-G-2 B7.00 RDU-0053 FLANGE BOLTING RC 'lVIS LEAKAGE AT FLANGE HECESSITATED INSTALLATION OF
'CRDM-053 FLANGE. i) NEW NUTRINGS/ BOLTS.
l 000006466i B-G-2 B7.80 RDU-0061 l FLANGE BOLTING RC VIS LEAKAGE AT FLANGE NECESSITATED INSTALLATION OF CRDM-061 FLANGE NEW NUTRINGS/ BOLTS.
1 00000631518-K-1 B10.10 CF-0051WA INTEGRAL ATTACHMENT WELD CF PT CONSTRUCTION RELATED CONDITIONS ACCEPTABLE PER l l WELD ENGINEERING EVALUATION.
000003132 C-F-2 C5.51 MS-0067 NOIELE TO ELBOW WELD MS NT SMALL GOUGE IS ACCEPTABLE PER ENGINEERING WELD EVALUATION.
000009724 C-F-2 C5.51 MS-0166 WELD-O-LET TO FLANGE WELD ' MS RT SLAG INCLUSION IS ACCEPTABLE PER ENGINEERING WELD EVALUATION.
000004911 C-F-2 C5.51 RR-0044 PIPE TO ELBOW WELD RR MT CONSTRUCTION RELATED CONDITIONS ACCEPTABLE PER WELD ENGINEERING EVALUATION.
000008285 F-A F1.10 MUH-0223 MAKEUP MU VIS MISSING NUT REPLACED.
I SUPORT RIGID SUPPORT I r 000007153 F-A F1.20 FW-0108 FW OUT SEC SHLD NW EL320 FW VIS LOOSE NUT TIGHTENED.
SUPORT HYDRAULIC SNUBBER L
000006707lF-A F1.30 NSE-0023 NSCCW NW IC FLTR RM 9 113 NS VIS LOOSE NUTS TIGHTENED.
l SUPORT RIGID SUPPORT I
I l l
Page 1 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Metropolitan Edison Company o,,, 3-29-94 2800 Pottsville PikeName Reading, Pennsylvania Sheet of Three Mile Island Address
- 2. Plant Nuclear Generating Station unit 1 Name Rt 441 South Middletown, Pennsylvania J.O. 62418 Address Flopolr Organization P.O. No., Job No., etc.
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp NA 100 Interpace Pkwy Name Authorization No. NA Parsippany, New Jersey Expiration Date NA ;
Address
- 4. Identification of System Nuclear River ,
- 6. (a) Applicable Construction CodeANSI B31.1 19 67 Edition, NA Addenda, NA Code Cue (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped ,
Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)
Nipple, Pipe Repaired NA NA NA NA NA Replaced- NO 1 Sch 40 i
- 7. Description of Work Replace Nipple between Sockolet and NR-V-32.
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure 2 i Other O Pressure 33. 5 psi Tut Temp. NA 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa- )
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is l I
recorded at the top of this form.
I i
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME 345 E. 47th St., New York, N.Y.10017
l FORM NIS-2 (Back)
- 9. Remarks Replaced 1" diameter Sch 40 section of pipe between NR-V-32 and Applicable Manufacturer's Data Reports to be attached 30" pipe due to pin hole leak in Socket welded joint.
CERTIFICATE OF COMPLIANCERepaired We certify that the statements made in the report are correct and this Replaced conforms to the rules of the ASME Code,Section XI. '"***'"*"'
Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA i Signed Date 4"b
- M ' 19 M gciwner or pers ossion(g Tit'* Mgr. NDE/ISI Services cmQ . ,
CERTIFICATE OF INSERVICE INSPECTION j l, the undersigned holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of and employed byHartford Steam Boiler I&I-Co. og Hartford, CT have inspected the components described in this Cwner's Report during the period 11~1b"91 to 10-16-93 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection, Commissions NB 5478(I)(N) PA-1887 j fiKliiector s Signepre National Board, State, Province, and E ndorsernents ,
i l
Date *O 19 N (12/82) l l
l
Page 2 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Metropolitan Edison Company o,,, 11-7-94 2800 Pottsville PikN" Reading. Pennsylvania Sheet 1 of I Three Mile Islatfif" ,
- 2. PlantNuclear Generatins: Station Unit 1 Name Rt 441 South Middletown. Pennsylvania J.O. 91294 MNCR 940019 Address Repair Organization P.O. No., Job No., etc. '
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp NA Name 100 Interpace Pkwy Authorization No. NA Parsippany. New JerseV Expiretion Date NA !
Address
- 4. Identification of System Nuclear Services River Water
- 5. (a) Applicable Construction Code ANSI B31.1 ig 67 Edition, None Addenda, N-416-1 Code case (b) Appliceble Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME >
Code l Nationat Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)
SEE REMARKS ON EACK Repaired No
)
l l
- 7. Description of Work See Remarks 1
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure N Other C Pressure 24 pil Test Temp. *F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informe.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
. . _ ___ _m_ .- _ m . _ _ _ .
j i
i FORM NIS 2 (Back)
- 9. Remarks Installed a 2" half coupling onto 12" Nuclear River pipe above NR-V13I)
Applicable Manufacturer's Data Reports to be attached to encompass thru wall flaw.
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Repair conforms to the rules of the
'"P'*****"*
ASME Code, Section Xl.
-Type Code Symbol Stamp NA Certificate of Authorization No, NA Expiration Date NA Signed - Date h)MM U 1917 gowner or owgs ossion.e, / Tf Mgr NDE/ISI Services (Acting)
CERTIFICATE OF INSERVICE INSPECTION f, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of PA and employed by Hartford Steam Boiler I&I Co. of Hartford, CT have inspected the components described in this Owner's Report during the period 10-17-93 to 11-7-94 . one ,,,1, in,,
to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report, Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
CommissionsJIE 5478(I)(N) PA-1887 National Board, State, Province, and E ndorsements f insi>ector's Si ture Date 4A 87 19 (12/82)
Page 3 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. owner Metropolitan Edison Company '
4-10-95 2800 Pottsville PikeName Reading, Pennsylvania Sheet of Three Mile Islawdr=
- 2. PlantNuclear Generating Station unit TMI-1 N.m.
Rt. 441 South, Middletown, Pennsylvania J.O. #91857 WR#776155 Address Repair organlzstion P.O. No., Job No., etc.
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp NA 100 Interpace Pkwy Name Authorization No. NA Parsippany, New Jersey Expiration Det, NA Address
- 4. Identification of System Reactor Building Spray
- 5. (a! Applicable Construction Code ANSI B31.1 19 67 Edition, NA . Addenda, NA Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manuf actu rer Serial No. No. Identification Built or Replacement or No) 4" Gate Valve Walw Co.
rth NA NA BS-V-0054B NA Replaced No
- 8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure Other Pressure psi Test Temp. * 'F
- Normal Operating Temperature NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
. _ . _ . . . _ _ - . . . . . - - . . _ - . ~ _ _ ~ .~ - -__ - _ . ~ .-. . . - . . - _ _.. _ . . _-
FORM NIS 2 (Back)
- 9. Remarks Applicable Manuf acturer's Data Reports to be attached i
CERTIFICATE OF COMPLIANCE ,
We certify that the statements made in the report are correct and this reDlacement conforms to the rules of the ASME Code,Section XI. P* D***"'
i Type Code Symbol Stamp NA ;
Certificate of Authorization No. NA Expiration pate NA Signed -
Date bMN O 19 W pn.r or owng o..ioa**f"* Mgr NDE/ISI Services (Acting) {
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of A and employed byHartford Steam Boiler I&I Co. of !
Hartford, CT have inspected the components described in this Owner's Report during the period 10-17-93 to 4-10-95 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or a loss of any kind arising from or connected with this I inspection.
Commissions NB 5478(I)(N) PA-1887
, _Ios.y.tu,. ~ .t o n .o.,.. .t.t.. p,..,n... .n_ n.o,._.nt s Date T
BMI N 19 i
(12/82) !
~
Page 4 of 31 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI !
- 1. Owner @ Akersock tkan EM t tre OntnOnn J Date /D !l 11 4 T u e pie *E"*
akEfRNn 800 9ORpentWILUfWh.
b5 Sheet 1 of I hf Ip.E W\ D. T.NYk30
- 2. Plant M O f" \ P Ar [s PO r t% hn t e b kinn Unit I Name I R6d e_44 \ $ 00% M)I r_bnM i 9Pntv3. Job OcA e r in t 9n9 )
Address Repair Organization P.O. No., Job No., etc. j
- 3. Work Performed by b 9 L.) M U d F A C Type Code Symbol Stamp n\t Authorization No. If\\- -
9 a[Pg0L9 Q tiaO M iEMPc.T es-1 PsiN r r (F 4 Expiration Date nh Ad dress
- 4. Identification of System (ORY E 09 Adhdhbba 1 RCM I C P\ 9$ n b
- 5. (a) Applicable Construction CodeMAh M\.1 19 L I Edition, DMN k Addenda; M I b d Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 R L E M @ RSfni. S t.cAsod 92 9 c.P Cooc. Crue lu M IL-\
- 6. Identification of Components Repaired or Replaced and Replacement Components I
ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, identification Built or Replacement or No)
ECa P- $ C, tt da. MA MA. A_
- 7. Description of WorkM dd)c A_h10t'\ N $P_ak b95 n (.3 DD EC 4 I C
- 8. Tests Conducted: Hydrostatic [ Pneumatic Nominal Operating Pressure d Other Pressure b 312 5 psi Test Temp. MA 'F
@.wae NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
d FORM NIS 2 (Back)
- 9. Remarks SD iCA 1 Dn mE br. $P ^ b'i EAM hi910 b EC
- i- I C- (Yid- L Applicable Manufacturer's Data Reports to be attached O t_ D >n % tid dline t' d til La Ch t k t-t n L C- _G AL N11 %ln 13 . N 9\910bNTOddld whh scon & Ws Urs a is 3/4" sthlol e lLb , M 2 , Akmt beliort x\ P\a u i (Twn\ , sb .
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and thishM Ifd f ^ conforms to the rules of the repair or repiecement ASME Code,Section XI.
Type Code Symbol Stamp ba-Certificate of Authorization No. M A- Expiration Date Signed 'LLNVEL Date IO*N~N 19 U Mor owner's Designee, Title gg CERTIFICATE OF INSERVICE INSPECTION l, the undersigned, holding a valid commission issued by the National Boar of oiler and Pressure Vessel Inspectors and the State or Province of EMn Ml W"M and employed by No r Nrst _$ M h b M Ef* d 1 Can M M of
^ P Nord CT- have i spected the components described in this Owner's Report during the period ID!h k O to IDI 6 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the i examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
- Commissions N s H b(N CQ PA I O b'I y
insp.ctys signato,e nationai so.,o, state, e,o ince, ano enoo,s.m.nis Date N*2M 19 ff (12/82) i l
l I
1 l
l
Page 5 Of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner @deo FDLbn. Edtson. OefnPan i cate10 M 4E Na Soq PoM ver.meP s k e.
gEPLdLt elJ e2 Ytt.OM 5 4 LW2.nteL. I I Sheet 'of Address
- 2. Plant f f.a. iud C 11\ hod 'Ndd E AP bE.n.5 0 t'l. Unit 'b '
Name bMM\boubaM IE Ldd. . PF nOS'1L\lRNcL' 3 oh Oed. c.r 10)El Address Repair Organization P.O. No., Job No., etc.
- 3. Work Performed tiy.. b? O U Uc.I tt AP ~ Type Code Symbol Stamp hkri i Ob 'If*.e PM.E Parhak*" Authorization No. (Sc.
Pal"M f fan 4 .r IOtN3 3e f*1C.i Expiration Date h\a Ad dress
- 4. Identification of System _ Mud far $ d. tnt 1".L kW f.C Idakt C
- 5. (a) Applicable Construction Code Ob65 D d 19 $ Edition, fbo- Addenda, MfL Code Case (b) Applicable Edition of Section XI Utilized for Repairs ce Replacements 19 9(o
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No, or Replacement or No) identification Built
.5 E E.
RMdu N\R k\\E' NA IU\b D\b RE9LRLE.-
mEMT-M Insb12_ bon. 6Y a_iave\na wsrepi b ttnet.A cbiJmeAis cAnd
- 7. Description of Workhntb P kf 12 r1EinEd LESv e k\0 Vt")Lis kot- SbiPEr kis1 M.I. C_.
- 8. Tests Conducted: Hydrostatic 0 Pneumatich Nominal Operating Pressure Other Pressure 99 psi Test Temp. n\C 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa.
tion in items 1 through 6 on this report is ircluded on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82)
This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
FORM NIS 2 (Back) 9 Remarks 3Gb b 06. D I bCM M E b DW II ('LM_ YD ' MON t'd P bN ilt' i Applicable Manufacturer's Data Reports to be attactkod Rw uhb G sk ut he m L al eko em in e m bons b bcdtbh a_tRWmL t-i dte.fvt. b Codta\_ a.nd_ (noettbr (TheceboloLmaLi Int \o e.ccel_
Corr osion. O'MI.c' l RsmE. Sr_c)oOn_ n c.\nss 3 /_ndo3.
n
- CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this b9 M conforms to the rules of the ASME Code,Section XI. ' ' ' ' ' ' P'*****"'
Type Code Symbol Stamp fL Certificate of Authorization No. U Expiration Date R Signed Date ANY 24 19 T wner or Owner's nee, Title g gg gg 7 yg gg CE ATIFICATE OF INSERVICE INSPECTION 1, the undersigned holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of k,dWLMW1 and employed by bPNOfd SPAR bNEPYS1 b- of b b k 5 Ord > OT have inspected the components, described in this Owner's Report during the period /O
- U
- O to lO' O' 9 5 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report, Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection, "v
vinspectop signature Commissions
~
National Board, State, Province, and Endorsements Date 19 (12/82)
Page 6 of 31 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owne, M e+= go la o Echson Cow.ov '
oe,e 2. is - 95 goo P 4+50.114. Pi Jce "*"
Ra..i! . Pexnsttu /* Sheet I of !
c s rd'Is N!b
- 2. Plant bJ v c.l em e- &cwcrebas SMe aa Unit I Name'
'R4. W l % s e rv1;.Qlc4. - PA . 7.o. II o 054 Address Repair Organization P.O. No., Job No., etc.
- 3. Work Performed by Cs P(.4 kJ v c If a f- Type Code Symbol Stamp NA l oo InfeePact P=r e kwa Authorization No. NA Pe r s e r,-. au
~~
h/ew seca<.v Expiration oate MA Address '
- 4. Identification of System Co rt-. kf O O J
- 5. (a) Applicable Construction Code USAS 633M 19 @ Edition, NA Addenda, NA Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 191L
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No) 14" rwr,ve, o.necx vawr. E** Le il NA NA CF-v - 5 A NA RE.ft.A u b NO I
- 7. Description of Work EcP lcs c.e I484 3 < 7 8h h kcg,*o.'n $ bo \f 5 L$ nvW bl4'sg,
- 8. Tests Conducted: Hydrostatic Pneumatic 0 Nominal Operating Pressure 2 Other O Pressure 1155 psi Test Temp. 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in x 11 in., (2) informa.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
FORM NIS 2 (Back)
- 9. Remarks Nod Applicable Manufacturer's Data Raports to be attached CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this1k9Cmtd conforms to the rules of the i ASME Code,Section XI, )
l l
Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed NN Date b #8 19 b OMor Owner'QuesienT 6tle Mewe%ec , WlK/13J SecvicsI hsa.emo l
CERTIFICATE OF INSERVICE INSPECTION l
1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State l
or Province of EMSwlo=Eia and employed by1*d*M N** LM I $ I bmf=C of NeeCM CT. have inspected the components described in this Owner's Report during the period lo- M - D to 10- i f - 95 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
1 By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the l examinations and corrective measures described in this Owner's Report. Furthe>more, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
ed / Commissions N/3, s(08 f.t)(N) PA 188'7
%6 r a Signatuf National Board 7 State, Province, and E ndorsements Date < f M 1918 (12/82) i
Page 7 of 31 FORM NIS-2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner in alcoocLthE_d_unn_ OtWiPAtW Date lb l .2 84 !4 C MOO Pok\ iud \e NA*
REROm L # PEk3tO S-(LU Rntt1_ Sheet I of 1
%N R. Th\\ a. $Wncl
- 2. Plant Mue_\vae Is En t1c_ho b S O tbrt Unit i Name MP_llM $Du sInt Address tkot.On s P L' nntL . oh bfdM lb1 Repair Organization P.O. No., Job No., etc.
- 3. Work Performed by d dur.kEaa. TEd\t10bl.tf 2 5 Type Code Symbol Stamp n\ ^
l55 rnpi La t e Roats'"
l_4 m_k ho e L , \l A Authorization No. ^\*
311 *iDa Expiration Date A i Ad dress
- 4. Identification of System ktritk_et bk nM OTS Es ' M h N i
- 5. (a) Applicable Construction Code BEE N 19 lo5 Edition, SC Addenda; nb Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 9 I.o
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)
R c.- R- 1 R Babcoc.K i
( OT S b , do ) \t_idt t9x MS-Miii. E 10181\ W1D M9ata us Db Ib MD M lia El D3812 \M D Rv_vfu fL N r_ s
[DT *. la '6, b M COX
- 7. Description ot Work ins bdtDt"L oT RErnokA Mddd NObb h 016 k f: Lod OD(_s b
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure psl Test Temp. 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
. .. -~ . _ . - - .- .- - . - - - - . . - . - . - . . - .
FORM NIS-2 (Back)
- 9. Remarks In dd a bOR ok RQ_m ob M M N Ob5 M A nN 041 Applicable Manufacturer's Data Reports to be attached M M O t_ BTS I, b \ i90e r- kt b e Sh P r> t (903 m L oT AL B Lnw ur koht sh ut (380) m A 6Tsb A Low er kubt _ sheet CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this DN A conforms to tt:0 rules of the
'***'*D'***'"*"'
ASME Code, Section Xl.
. Type Code Symbol Stamp A Certificate of Authorization No, hk Expiration Date
- Signed Date OG' 19 Mor Owner's Desiones. Title pfp7 gg g 7 g g3 gg CERTIFICATE OF INSERVICE INSPECTION l i
I, the undersigned, holdirt a valid commission issued by the National Board of Boiler and Pre sure Vessel Inspectors and the State !
or Province ofbOW h N- and employed by Nn Mntl bnm Em er TD Oo- of d Eo f1 > N _have inspected the components described '
in this Owner's Report during the period lb*b*k3 to IO *IS
- S I and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions MN M \
r inspect ,.spon.tu,. ~. tion., ...,o, ...te. , vinc.. ene e neo,sements Date 6 19 (12/82) i I
e 1
i i
Page 8 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner MP1h001 E An EM MOO CDfn9 Afb 4 Date ID*.24 9 T c2TSOO PokhV1LLF._ bkE 9hDWi[3 ,9EMMS4 L\lRKhA Sheet k of I h Mt.Ihd(_ N h"ty.k. Onhtnn
- 2. Plant M w \ va r M n e_rn bn I, Unit $.
Name RW 1441 snirA ,(AL)lP m,hPnot'"t. Ob OPdvf UN Address Repair Organization P.O. No., Job No., etc.
- 3. Work Performed by bO() M d c \ rM r Type Code Symbol Stamp e IDDTOkttQ1C.g bky q'* N Authorization No. Mm PPtRiif 9RAN 2 Mesa e_ r (.r -4 Expiration Date AkA Address
- 4. Identification of System \ Pn / k or hm n4 DT 16 ' A*
- 5. (a) Applicable Construction Code bM 1d 19 ld Edition, 4O Addenda, MA Code Case (b) Applicable Edition of & ' XI Utilized for Repairs or Replacements 19 E fo
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)
I l
RC. R \M GAbcock. T g,g g gg gg g qg
[Us5 b R,D d r'O )c 4
)
i
)
i l
7, Description of Work Tnda NIA1 on A a. (YNr3() Oz4 kk4 iatd rr1 9kkT f,
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure O Other Pressure psl Test Temp. 'F Db NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E,47th St., New York, N.Y.10017
FORM NIS 2 (Back)
- 9. Remarks In d ^ ^ t M- d- D OUR W E 9PI bh C Applicable Manufacturer's Data Reports to be attached
} hi i T & r l b e b e rk hF m % b ^ W R Bu 3 e2 4 > 4t_Am r IDS.
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this NM \ k conforms to the rules of the
*I'*P'***'"*"'
ASME Code, Section Xl.
Type Code Symbol Stamp A-Certificate of Authorization N - A Expiration Date Signed L C S"'N' Date _ CO 4 19 Mr or Owner's Designee, Title
$NPt bhl. MDE f Y %T $ C_t'U t L(_ \ DA/(UCC CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holdin a valid commission issued by the ational Board of oiler and Press re Vessel Inspectors and the State o Province of kPM N M"\^ and employed by N kut d h f o N b t P D I b- of B N Y0t1 > N- have inspected the components described in this Owner's Report during the period b'O'S 3 to Ib M 5 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
~
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property dama0e ot a loss of any kind arising from or connected with this inspection, Commissions N S 9A kNN f' inspec[r's Signature National Board, State, Province, and E ndorsernents Date !8" 5 19 (12/82)
... -. - . - _ - . ~ . - . . . . . - . . ..-
Page 9 Of 31. i FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI ,
- 1. Owner ba:Lh&9OLtv Art Ediim DDf0RlM Date /D ct5 9,00 Pot
'- EROm b (su& PAG" ,
E rin 5-ll\la n \rt Sheet 'I of I "Thtet. Mds bond
- 2. Plant h.I u d a r b en r.ra._hn L sot on Unit ' i. 7 Name Rouk Mt sou% frhMh6n_, P& Tob Mer moco.
Address Repair Orpeniration P.O. No., Job No., etc.
- 3. Work Pa-formed by fiQ G M u cktid Type Code Symbol Stamp Ma -
160 Tnkt.tPALit 9Mku)A"/
- Authorization No. M et 9 ara 199 An 4 s Id o n s 3 P_f'i E-4 Expiration Date Ma Address
- 4. Identification of System b E rM LA btblDn
- 5. (a) Applicable Construction Code USNS D.I 19 (nE Edition, Dtab Addenda, nh Code Case (b) Applicable Edition of Section XI Utliired for Repairs or Replacements 19 8Is
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Pepaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Bulh or Replacement or No)
C A S J4 FL "G\ct nkA. tlk nk da RE.pgig( No r
- 7. Description of Work RdM0VE LERK M Lint _ kt otft C R.V.4 k CRP d (jrdVt Onet
- 8. Tests Conducted: Hydrostatic 0 Pneumatic Nominal Operating Pressure [
Other O Pressure 900 psi Test Temp. d03 *F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa- i tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form. l l
i (12/82) Thl Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017 l
)
I
. - . - . _ = .- -. . . _ . -
FORM NIS-2 (Back)
- 9. Remarks R e_mouel h %1' ups LErd oW u n e_ bm ch. v.4 A Aue b h Applicable Manufacturer's Data Reports to be attached d EU PS D9tnuh 6Y & %h> - u_h H
- LEAK' A t v:d_ in sia_d e_2___' A__ X o c.k e k 113 dd e1 Y LO l_2 . N $(r)E 1 e r klon_ Ela BAG 1 TL_J/* \
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this UN(* conforms to the rules of the ASME Code, Section Xl. '# P'***""'
Type Code Symbol Stamp b Certificate of Authorization No. NA Expiration Date NA Signe ,LG <srA o UfL Date D 06 ,19 9b Nner or oh- ,. . 7u. .
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National oard of Boiler and Pressure Vessel inspectors and the State or Province of 9f dWIUnioL and employed by k(4M ork PM tvt b k EI U 1 bOf'f 4 G d of Nark Enr12 W. have inspected the components described in this Owner's Report during the period O O'N' to IO*U'U . and state that l to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, j By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer l shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions N blE ES $N t r4fet'ori signaturof National Board, State, Province, and Endorsernents Date_ IO' bi 19 95 (12/82) l
Page 10.of 31 FORM NIS 2 OWNER'S REPORT FOR REFAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Medeopol'edan Ed io m C.e e NV '
Date $ 0 "N" D 28oo P.HavMle PR* ,
keed. &. Pe.nn syAddressal ve'.a Sheet ! of I
-"Ther.t rv1 l c 2sl%)
- 2. Plant bJ ur_le n - C ---. U n
- S 4 d. en Unit TM- I Name" ,
%4c. '+4 I ' SosAk rv1.2disW%sv\d. c. -
30 I oISO'S
'Ad dress 8 Repair Organization P.O. No., Job No., etc.
- 3. Work Performed by CF C4 ' M Vc. lea F Type Code Symbol Stamp kJ4
- 4A l0 0 ."Inftepecc "P. k . Authorization No. '
Mgmer.o . Ne_w l 8 "I c,m Address /
Expiration Date MA
- 4. Identification of Eystem (YlG NC.- U p Me) Po .fk& -
- 5. (a) Applicable Construction Code U545 D 7 19 CE Edition, DMW Addenda; N4 Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 8 C
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. N o. Identification Built or Replacement or No)
NC.- f - l E UA PJ A b8A MA ssA ler.,sme NO
- 7. Description of Work 2C.* f- 16 sea i Inj eden L.c. k- eW en 6c < ~4
- 8. Tests Conducted: Hydrostatic @ Pneumatic Nominal Operating Pressure O Other O Pressure 3150 psi Test Temp. A> A 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained f rom the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017 l
ll A
... -_- ~ - . - - . . - - - . - - - - . . . . - . . . . . . - . = ~
l l
l 1
FORM NIS 2 (Back)
- 9. Remarks c. . F . i rs 9 .1 J G e m Le.k-0TT # d ,., %d 2e#Iue d 1 Loncanie uanutactor.r s oats neports to de attaen.d i of 41,e 6 3M43 1 A ca l iM C+i, c, I %. , JeA / .* J.41, cJoul.le ]
Is e Ia-Vo w . 14II r.slds d% .% -kk e se n a f -ll,e NI S- 7. a r.c i i i j
7J v c.lca r- C.l 4 s) : N-l .u rosmE. (4c.-rsa0 v/ C.l.ss v1 [IuA< \
l
! CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this!TDl4he.Nconforms to the rules of the ASME Code,Section XI. '*D A' ' '* P ' *** * *"'
Type Code Symbol Stamp d Certificate of Authorization No. M Expiration Date Signed / > L E ST8**M , Date Od. % 19 D
- ' **W uu /n 1 s pee, n us r
/
CERTIFICATE OF INSERVICE INSPECTION l, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State t or Province of 7 mmh a and employed by M ** $ b Enelf r" I 21 Co*#=W of NceM*M i U- have inspected the components described '
in this Owner's Report during the period 10-U-33 to Ih 31-9Y . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
/ Commissions M bN lb
// ' inspe'ctor's #gnature National Board, htaf',s P}ovince, and E ndorsements
~
Date 19 (12/82)
Page 11 Of 31 FORM NIS 2 OWNER'S REPORT FOR REPAlRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner MEUofoLMtt Ntion't b meAn4 Date ID T1 4i M6DD 0 0 Svt\\s. b e Rt. Anim 9t_ n<n 4 wa na Sheet 5 of I he f.E th\ e. INOth
- 2. Plant N or_k ec P [s en rmito r, N2 kien Unit i
Name Ebde! D\ .SoM, kg t n. , htnw A. O btdtt- 7D903
- Address Repair Orgenlaation P.O. No., Job No., etc.
- 3. Work Performed by b9 O M uc.I em t- Type Code Symbol Stamp d A-I D b Ynk tr P AL L har\f.h) A-j ""' Authorization No. det htif M90An 4 2 Mau3 3rf(r4 Expiration Date MA Ad dress
- 4. Identification of System DliC.A4 kd
- 5. (a) Applicable Construction CodelMS E3C 19 Im E Edition, DM Addenda, A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 b
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code
. National Repaired, Stamped l Name of Name of Manufacturer Board Other Year Replaced, (Yes l Component Manufacturer Serial No. No. Identification Built or Repiscement or No) j D\b V (s'I Ma vda. A M~ h\^ RE? LA4 E- Mo l m e.r/t \
l l
l
- 7. Description of Work .10skA1.h ktbtL A ot
- O e.A.if D R V
- lol R tUl d \lPtL\/ f>
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure IS5L psi Test Temp. nk 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017 l
J
. . - . _. . .- =- - -.__ ..- - . . . _. . _ . .. - -
FORM NIS-2 (Back)
- 9. Remarks 30 A- ^k t m 6 bt M tt Ml_U E In Udd Ut1Nin 6 ;
Applicable Manufacturer's Data Reports to be attached M [n ts (LA feinTr i a l_s /1 h PV1mnh DAnhP ' 3/4* NQ ;A(frlF_ ,
9 Aiom xt ch ss 1 Grur3
.- 1 t ,
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this EUIAl- IfWOt conforms to the rules of the
P*'P****"'
ASME Code, Section Xl.
Type Code Symbol Stamp n\^
Certificate of Authorization No. AkA Expiration Date 4 Signe . -
, c..E.57AoimC- Date 2D O SI- 19 95 Owner or Ownerposignep Title g CERTIFICATE OF INSERVICE INSPECTION 1, the undersi0ned, holding a valid commission issued by the ational Board of Boiler and Pressure Vessel inspectors and tb State or Province of EP"MMOMA and employed by 0td NfM t8" I Y I 00 M W of br k Ea rd_ a 6 have inspected the components described in this Owner's Report during the period IO* U*D to lO* O*9 5 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, 1 l
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
// Commissions 1b b
' nspector's i % nature National Board, State, Province, and Endorsements Date N* 19 (12/82)
Page 12 Of 31 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner $chD90LLkML Er1Asort Oornortna Date itisiss atoo 9cMumue P&'"e'.
RE nom L . Pe.nns4 twtnici- Sheet \ of i
- 2. Plant The d e.t brA u c1tLar 2X d e ^2f("
w_ra_ L nJ_ b4_h on- Unit i Name kOd t 14 L4 ( Sou b , b\ t. Ou.h e a. 3 rM Ore 1 nt- Ib91 M Address Repair Organization P.O. No., Job No., etc.
- 3. Work Performed by b91i M o r 1 e a r- Type Code Symbol Stamp nk ct b I nk a fP\c.f. 9Ar%.weg[*
- Authorization No. Ma r MAiVP AtTf ; M h.N 3a V N Expiration Date Ak fL Ad dress
- 4. Identification of System kPrir br bon d
- 5. (a) Applicable Construction CodeOMS 63U 19 d Edition, bah Addenda, k\ ' M lb -I Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 hie / 92. mA R5r4E St c_tJon n ISCl1 \)h bod L cpl.5t U 4 l[,d
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. N o. Identification Built or Replacement or No)
Vo- 9~ \ 0 "
O
Drcun Lmt
- 7. Description of Work REPLRct kor RE.9fht" Por PDW % , P19\n b dcn3n5kr f'zifft h IN_Iuc[\n b 131 WELO ILC t h o M
- 8. Tests Conducted: Hydrostatic 0 Pneumatic Nominal Operating Pressure ((600t Cfist_ Id4ll.d hhe.\ RECcd Other O Pressure _. M / 6 9 psi Test Temp. 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
l l
FORM NIS 2 (Back)
- 9. Remarks Outun b.1d bt LOddn_ b OL l 1 R E.kli t* .id b _
%Ea d. h1' h Applicable Manufacturer's Data Reports to be attached l_Efhi h3Pt 5 rk P h r e h vM n_b_ bP. P_Y1 S Ti t3 I s TW LLIT* 1 N U _- ! O _ { M kM u3 09 S N ffitG.
BT RC-V In B1 'Thu Ranut mdu1> A M Restar e menk d h eba ancL a len 64_ d pwr_ dom _4r em A o AL ac_ t sn.
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this M9m R conforms to the rules of the
'*P' *P'***'"*"'
ASME Code,Section XI.
Type Code Symbol Stamp M a-Certificate of Authorization No. Expiration Date O Sig ed 3WTL JT VC MT Date IbN 19 wner or owner' Title j g -
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of 9P NMH LVFLWL and employed by b M d N MR b d D5E'105 b- of bNdods C.T have inspected the components described in this Owner's Report during the period 10- Il ' O to ID*l3 S S . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions b E E b NU
/ InspecterYSignature National Board, State, Province, and Endorsements Date ll* lY 19 Vi~
0 2/82) k
Page 13 Of 31 FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner $PD090tha EdiSort ornmn4 Date I\- 2 -4 E Name 21$O 9o h\/td r., hike.
E. r \ n La > V M nSiLVt1M A Sheet I of I Thc c h\e. IU'A*n"cL
- 2. Plant Moe En t- Is an Lt-n b tn6 $UIact Unit i Name Roub. Wt scuut, Nhkile.6n., Penm.. 3d Order W9R Address Repair Organization P.O. No., Job No., etc.
- 3. Work Performed by M dud Ear
- Type Code Symbol Stamp nh 10D Inke.rpace. car \o f%.4 N'** Authorization No. Ma pap 5199a t14 , h3 tb ) titir i Expiration Date N1 Address
- 4. Identification of System DecM N P ^ k S. (a) Applicable Construction Code IMAX E31.7 19 L E Edition, Of%h Addenda, nIa- Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 D
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. N o. Identification Built or Replacement or No)
DE V I W n\ u & w\u f\\ m n\4 REPLnu mnt MO
- 7. Description of Work Li sk ded_ sort A ct \le_nk \ln_Id e_ ort hhe_ hlLh_1po(ytt T Old pip)'r)(,
- 8. Tests Conducted: Hydrostatic [ Pneumatic Nominal Operating Pressure Other Pressure le 5 O psit, Test Temp. n ka 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
FORM NIS 2 (Back)
- 9. Remarks in_dd\ahon_ oD a. Y2' Vank \3 A\tt e_ [BR-\/ li.4 3 ried a ( Ac e in k hd Dioidi, Applicable Manufacturer's Data Floports to be attached o n_ O r_ W fluri OtCP L)91hr per fvt d hu \/ "I A _ h_lud r_tr f4 w No Il pc _Sr e[jnn X\ d a _u. a_ (Tu ch CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and thisRM1 furtne.nk conforms to the rules of the ASME Code, Section Xl. '*D*k *P'***"'*"'
- Type Code Symbol Stamp &
Certificate of Authorization No. Ob Expiration Date Oka-Sig Owner or owner' Itle A M 5W-# Date M' / 9 19 W j
CERTIFICATE OF INSERVICE INSPECTION t, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of EmniN Lun nk and employed by bedn+d Sk r^^ bad 8' r To W
- Tn s.1 of b rl (ord_ ; R have inspected the components described in this Owner's Report during the period /O* ll* U to IO*I3 95 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions M NE {T I OA NO f "Inspectfs Signature National Board. State, Province, and E ndorsements Date O~ M 19 N (12/82)
Page 14 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l l
As Required by the Provisions of the ASME Code Section XI I 1, Owner Metropolitan Edison Company Date January 6. 1995 i
Name 2800 Pottsville Pike l Readine. Pennsvivanin Sheet 1 of 1 '
ThreekileTsNnd. . . .
- 2. Plant Nuclear Generating Station Unit 1 i N. .
Rt'441 South. Middletown. PA JO 096477 Address Repair organization P.O. No., Job No., etc.
- 3. Work Performed by CPU Nucionr Type Code Symbol Stamp N/A 100 Interpace Pkvy. Authorization No. N/A Parsinnanv. New Jersev
~'
Expiration Date N/A .
Address'
- 4. Identification of System Mttel one R ortri e n D 4trne IJg t ov
- 5. (a) Applicable Construction CodeANSI B31.1 19 86 Edition, N/A Addenda, N-416-1 Code Case c (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 N
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code Nationat Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes ,
Component Manufacturer Serial No. N o. Identification Built or Replacement or No) 12" Std. '
un11 ning N/A N/A N/A N/A N/A Repair No ,
l l
1 l
- 7. Description of Work Repair of a localized thru wall finu
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure X Other O Pressure 21 psi Test Temp. N/A 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
FORM NIS 2 (Back)
- 9. Remarks Installed-a 2" thrd. half couplina as a branch connection over a localized Applicable Manufacturer's Data Reports to be attached thru wall ein hole leak. A eipe olug was installed subesquent to welding.
NDE included a liquid penetrant examination of the root nass and the comnleted weld ioint. A VT-2 examination was performed in accordance with IWA-5240 of ASME X1.
Repair (Half coupling) located down stream of NR-V-12B CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this SOM conforms to the rules of the
D'*D'"'*"'
ASME Code,Section XI.
Type Code Symbol Stamp N Certificate of Authorization No, N Expiration Date N '
Signed Date l .T 19 pner or owys ossiones, i.
Mgr. NDE/ISI Services CERTIFICATE OF INSERVICE INSPECTION f, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of [EW 4 and employed by N A att Nd SNm Seder J II b. of N42T M O ' O T- have inspected the components descriteed in this Owner's Report during the period /O "Il M to /0 "It'* 95 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. i I
Commissions National Board, State, Province, and E ndorsements
~
f ' tnspector's Si[ature Date AM /f 19 N (12/82)
__- ._ . ___ __ . _ _ _ _ _ ~ . _ _ _ _ .... _ _ _ - .
Page 15 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. OwnerlatIQpplitan Edfson Company Date 10-12-95 2800 Pottsville Pike Name Pandh, Pennsylvania Sheet I of 1 Three Mile Island Address
- 2. Pls.it Nuclear Generating Station Unit 1 Name Rt. 441 South, Middletown, Pennsylvania Job Order 109701 Address Repalr Organization P.o. No., Job No., etc.
- 3. Work Performed by GPU Nuclear Type code Symboi Stam N/A 100 Interpace Parkway Name Authorization No. N/A Parsippany, New Jersey Expiration Date N/A Address
- 4. Identification of System Core Flood
- 5. (a) Applicatle Construction Code US AS B31. 7 19 68 Edition, Draf t Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code Repaired, Stamped National Name of Manufacturer Other Year Replaced, (Yes Name of Board Component Manufacturer Serial No. No, Identification Built or Replacement or No) 6 CF-V33A N/A N/A N/A N/A N/A Replace- No ment 1
i l
I l
1 l
- 7. Description of Work Replacement of downstream flange.
- 8. Tests Conducted: Hydrostatic @ Pneumatic Nominal Operating Pressure Other Pressure 3160 psi Test Temp. N/A *F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
. . .. - ~_~.. .-- .. . . - - - . - - .- . -. . - .
I 1
i j
l FORM NIS 2 (Back) 1
- 9. Remarks Installation of a threaded male adapter and an associated seal Weld onto Applicable Manufacturer's Data Reports to be attached a 2500 # R.F. 3/4" flange and the subsequent installation of the flange ;
downstream of CF-V33A. NDE included a Liquid Penetrant Examination to the
" Original Construction Code" requirements.
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and thisReplacement conforms to the rules of the ASME Code,Section XI. P' 3 ' 'D'*C'**"*
i Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration care N/A l Signed - Ah Date C@dd M 19 W '
gowner opner oespe, Titie Manager, NDE/ISI Services i
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid ommission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Pennsylvania and employed byHartford Steam Boiler I&I Co. of !
Hartford, CT have inspected the components described in this Owner's Report during the period 10-5-95 to 10-5-95 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI. ,
By signing this certificate neither the Inspector nor his employer makes any warranty, exptessed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. l
/d d f"6Mpictor's pneture commi,, ion, NB 5478(I)(N) PA 1887 National Board, State, Province, and E ndorsements Date
/8" /O 10 1
l (12/82)
)
_ _ _ _ _ _ _ -,__ , , . _ _ w -
. _. -- . - _ - - - _ . ~ ~ . - . - - . _ . - - . - . - . _ - - . _ . . .-, _ . . . .-
Page 16 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Metropolitan Edison Cgapany cate 10-12-95 2800 Pottsville Pikh "
Reading, Pennsylvania Sheet l of Three Mile Island"d*"
- 2. Plant Nuclear Generating Station Unit 1 Name Rt. 441 South, Middletown, Pennsylvania Job Order 109718 Address Repair organization P.O. No., Job No., etc.
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp N/A Narne 100 Interpace Parkway Authorization No. N/A l Parsippany. New Jersey Expiration Date N/A Address
- 4. Identification of System Chemical Addition
- 5. (a) Applicable Construction Codel}$ AS E31.7 19_6B._,_ Edition, Draft Addenda, N/A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 66
- 6. Identification of Components Repaired or Replaced and Replacement Components I
ASME Code National Repaired, Stamped .
Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. N o. Identification Built or Replacement or No) l CA-V-4B N/A N/A N/A N/A N/A Repair No ;
1
- 7. Description of Work cnn vin mor Ir p t- wp1th meieing 1/4" leak-of f line for CA-V-4B.
- 8. Tests Conduc*rd: Hydrostatic Pneurnatic Nominal Operating Pressure Other ] Pressure __SOA psi Test Temp. ?M 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained f rom the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017 !
FORM NIS-2 (Back)
- 9. Remarks Installation of a 3000# pipe cap and the associated socket weld on the Applicable Manufacturer's Data Reports to be attached 1/4" sch. 40 leak-off line of CA-B-4B. The activity included inspection, Liquid Penetrant Examination and weld size verification to both the new weld and the existing nipple to valve weld as this line is now pressure retaining.
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct and this Repair conforms to the rules of the ASME Code,Section XI. ' ' ' ' ' ' 'D****"*
Type Code Symbol Stamp N/A Certificate of Authorization No. N/A Expiration Date N/A Signed MdPS ME' / Date "M@ d 19 T g owpor ownerpes.enee, Titie h ager, NDE/ISI Services CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of. Penn cnr1vani a and employed by Hartford Steam Boiler I&I Co. og Hartford.CT have inspected the components described in this Owner's Report during the period 9-23-95 to 9-23-95 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the !
I examinations and corrective rneasures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection, i
e Commissions NB 5478(I)(N) PA 1887 l'nspector's ['enature National Board, State, Province, and E ndorsements care /4- /6 igW (12/82)
(
Page 18 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner IFif.T4CN D Ol JY4d (As&DM CeMak _ Oate Ol~
- 200o ForrsviwJ: f W'
- m. ,J a PoJws,_w.vaeJim Sheet i of I I Ad dress v n as.s m a.c ist.meam
- 2. Plant k.lde 8 CEhK8JWJoJG. M M ieed Unit I Nam.
RT 4ya soum . minoucinw4 Atuseo.vwig J.o. 8 5 210
' Address '
Repair Organisation P.O. No., Joo No., etc.
- 3. Work Performed by. G Pu NucAAAA Type Code Symboi Siamp adA i CO .INTf,APACf. f%dtK d hI Authorization No. d$
. PM9 fFM Y Meld M8/ '
Expiration Date M Address
- 4. Identification of System bed 8f b***
- 5. (a) Applicable Construction Code nob
- 19 Edition, M Addenda, A Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 b 6 Identification of Components Repaired or Replaced and Replacement Components ASME Coce National Repaired. Stamped l R'Di8c'd.
Name of Name of Manufacturer Board Other Year t Y'5 ,
Component Manufacturer Serial No. No. Identification Built or Replacement or Not i
, Ve l e /) MA MA R C~ No
@kt A E i
i ! ;
l 1
l i i ,
I 1
- 7. Description of Work NE kMF
- 8. Tests Conducted: Hydrostatic Pneumatic C Nominal Operating Pressure Q Other O Pressure AIN psi Test Temp. MO 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12J82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
FORM NIS 2 (Back)
- 9. Remarks *N O 8 b
- N8 OCd. b 3 AppHcable Manuf acturer's Data Reports to be attached bo lts sw.) s'sys .C w=Ay., G-.- % Ac Acie) .
CERTIFICATE OF COMPLIAN '
We certify that the statements made in the report are correct and this *** onforms to the rules of the
I''''"'*"'
ASME Code, Section Xi.
Type Code Symbol Stamp Al A Mb Expiration Date NA Certificat horizati nNa -
Signe Date IC # 19 b maner or OwnervesigneDTitle CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of %&WAMI A and employed by HAMO& SWM DEL T 4 I OMWo, ,
NTEN (.T have inspected the components described in this Owner's Report during the period (0-17 d 3 to 10 % . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
- Commissions NS M 6 U N FA.1887 Nationes soera,' state!Pr'avince, one e noorsements spictor's signeyfra Date A M 19
/ \
l I
02/82) l
)
Page 17 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS I As Required by the Provisions of the ASME Code Section XI )
I
- 1. Owner bPO901.dRtt bSon CornPAn-4 '
Date 10! ICLk 4 E l dSOD 96ktiud\c P"$:."E.
KEAQLh,.ils s PE A.)O 54 LORntcL - Sheet 'I of ' f Thhtn.fGdn YSTnnd.
2.' Plant Alu r_\ E A e In En r_tahn L % b1 o n Unit I Narne 3DLATCL 414(,'$odh , WM)ebn. s9enod. 1h brd er IOW Ed Address Repair Organization P.O. No., Job No., etc.
- 3. Work Performed by bfu d Oc le.nP Type Code Symbol Stamp M A.
Ibb'Inkd PattL 9aPV.uJfH" '" Authorization No. nb Pat M99an 4 h\eus h_t-ifM Expiration Date N Address
- 4. Identification of System MRkE UP M 90hbrd1 on 1 NC.9. IE bd b(O b
- 5. (a) Applicable Construction CodeMR S b'M "I 19 la h Edition, MYU Addenda, N ' N I b - I Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 T5l l% @ A Sm? hk. ton.M .McL3. pc.r C. Ae. Case. M J4 )L-\
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of ' Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification Built or Replacement or No)
Re.9- ) B n\c. nk n\a. rdm nb h([ Mo i
- 7. Description of WorkMON tc.a hion ek 3C.4( 9the la d RC.9 \6
- 8. Tests Conducted: ydrostatic [ Pneumatic Nominal Operating Pressure h Other PressureID 3l25 psl Test Temp. ^\a *F
@.vus NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
1 FORM NIS-2 (Back)
- 9. Remarks M b Mb^ b oA 6Y ee Sr_o_l b 9an 9)P\n b oY 'RC_ 9-in kb' hke_k Applicable Manufacturer's Data Reports to be attached h e_ n Pt, i /td sizmr p M d Mi r.n N e kMd_ hE O sll hm Win k_ IM 9W)O L DONS Ecd to Abw W e_ scoor A Abu fort 2 is 3/4" <eb 1_,le ILb > M t . (A smt 4 4 ion D bttai i - (IL)B) Sb.
s I i
, . CERTIFICATE OF COMPLlANCE We certify that the statements rnade in the report are correct and thisEMA h conforms to the rules of the ASME Code,Section XI; P
- i' "' P ' '* *'n o nt Type Code Symbol Stamp..G\a_
Certificate of Authorization No. ^ Expiration Date R Signed Date DcrteM M 19 ,,,3 f gner or owf s Designee,pe g g CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of PEGGM ktim'd- and employed by b MMA N P^ 'n bdt f Y k Y INd of b rdEnPd_i D. have in ected the components described in this Owner's Report during the period kb U to !D\ O and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificato neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
- - > Commissions h1E 5Wla [d (KU h_ \80 National Board, State, Province, and Endorsements
/~'~ Inspector's lyinature Date O~ N 19 9 [
(12/82)
Page 19 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner E}gTitQoLs744) CheaDJ Ce%dy - Date 81* 82
- TII 200o PaisvtMK hW*
12EAbe eJG 3 PEJJNSYLVAeJtA Address Sheet I of l "TH AEE WHLK ISLAmet>
- 2. Plant L3Ornean C th>OtpiTnsM. STMiceJ unit I Name RT 44i SOU1H , Milt 0LCOI4>=3_ bhaft# ant 4
.J.O. 6309'7 Cmit, 91- 00*J Ad dress
- Repair Organization P.O. No., JoD No., etc.
- 3. Work Performed by . GPuNuogAA Type Code Symboi Stamp h)A i00 M EAPACC f%AKdy Authorization No. U$
f A 85mi M Ae4 Y' N ELJ .7ERSE8r" ~
Expiration Date NA Ad dress
- 4. Identification of System b e.sy I-4F44 M e*va IHLAFT
- 5. (a) Applicable Construction Code USAS B'JI. 7 ig 68 Edition, M Addenda. M Code Case (b) Applicabie Edition of Saction XI Utilized for Repairs or Replacements 19 b
- 6. Identification of Components Repaired or Replaced and Replacement Components l
ASME Code National Repaired, Stamped j Name of Name of Manufacturer Board Other Year Replaced, (Yes j Component Manufacturer Serial No. No. Identification Built or Replacement or No) l l
?
' lY hek l
j
- v. i % Welw.c4 AJ A wA bH-v-(A 94 Rep e;n.) po i i
! l ,
I l i
! l i I
l i )
l l l l t
l 1 i .'
i l, I
l, I
- 7. Description of Work $N, l bee k5 l
- 8. Tests Conducted: Hydrostatic 0 Pneumatic @ Nominal Operating Pressure Other Pressure M psi Test Temp. MA 'F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017 l
l
FORM NIS-2 (Back)
- 9. Remarks
" N' "U 4 D* bI8D O 4.on eoi. uanaecto,., s oath .,ts to o. eetacned
' sec.k. oft +s w A s,p<, d o f v=lvt. bH-V- 4 A . ^" Le) 1
.fc.in v.im 4. b H v. 6 A .
CERTIFICATE OF COMPLIANCE We certify that the statements made in the report are correct a A sis _kM8 b conforms to the rules of the reoair or reoiscement ASME Code,Section XI.
Type Code Symbol Stamp DJ A hJb Expiration Date NA Certificate of Authorization No Signe
- Date /2-/1 - 95 is 95 Ener or owner Laos.gnepTitle CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessei inspectors and the State or Province of DdNMNI A and employed by NO OO NUM WEL U1 b Wof O have inspected the components described NMN in this Owner's Report during the period 4 0- PT -3 3 to 10 % . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of eny kind arising from or connected with this inspection.
- Commissions NO Mb EA* N N 7- ' insoector"g%gnature National Boera,' State!Pr'ovmce, and Endorsements Date [$ 19[b (12/82)
Page 20 of 31 l
l l
l l
FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI i i, o,n , Metropolitan Edison Company g,,, 11-3-93 2800 Pottsville Piksome Reading, Pennsylvania Sheet I
of 1 Three Mile Ad dr***
Island Nuclear Generating Station 1
- 2. Plant Unit Name Rt 441 South Middletown, Pennsylvania J0's 71258, 73246 Address Repalt Orsenitetton P.O. No., Job No., etc. 1
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp NA l 100 Interpace Pkwy Name Authorization No. NA j Parsippany, NJ Expiration Date NA Address !
- 4. Identification of System Reactor Coolant ,
NA
- 5. (a) Applicable Construction Code USAS B31.7 39 69 Edition, NA Addenda, Code Case (b) Applicable Edition of Section XI Utif tzed for Repairs or Replacements 19 86 l
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code Repaired, Stamped National Board Other Year Replaced, (Yes Name of Name of Manufacturer Manufacturer, No. Identification Built or Replacement or No)
Component Serial No.
88000 GPM Westinghous RC-PIA NA ePaired NO NA NA Replaced Centrifunal P' imo Elec Cor 88000 GPM Westinghous a Repaired NO NA NA RC-PID NA Renlaced Centrifunal P 1mn Elec Cor n
- 7. Description of Work See Remarks l l
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure See ps! Test Temp. M A 'F Remarks NOTE; Supplemental sheets in form of lists, sketches, or drawings rney be used, provided (1) size is 8% in. x 11 in., (2) Informe.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
FORM NIS 2 (Back)
- 9. Remarks Installed new design cartridRe seal housing and inodified the seal bypass Applicable Manufacturer's Date Reports to be attached and scal leak-off oloinn to fit the new cartridge desinn. A hydrostatic test at 3125 esic was cerformed on the #1 Seal leak-off ard by-pe.ss lines and l
97.5 psig on the #2 and #3 seal leak-off lines.
CERTIFICATE OF COMPLIANC@ePaired We certify that the statements made in the report era correct and this Rep 1 nr ed conforms to the rules of the ASME Code,Section XI.
I Type Code Symbol Stamp Expiration Date NA Certificate of Authorization No.
s;gned ' { Ib/D Date NMM I ~ 19 M
[wner o OfFner's Desiapitle NDE/ISI Services Mgr.
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of PA and employed by Hartford Steam Boiler I&I Co. of Hartford. CT have inspected the components described in this Owner's Report dvring the period 11-16-91 to 10-16-93 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificato neither the Irispector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any menner for any personal injury or property damage or a loss of any kind arising
- om or connected with this inspection.
/ f. Commissions NB 5478(I)(N) PA-1887 NationW Board, State, Province, and Endorsements tofsSIonatureg Date Ill N 19 N (12/82)
I J
Page 21 of 31 FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- i. Owner fr1C.740 Pole v4AJ CAaapfJ CemMdL o te 11 - l'2. - W 19eo PoTTsVol.<4 hN*
Me eJG hMJhn_5g'LVA 8
eJtA ' .,_ Sheet I of Address THMA mu 15LAut>
- 2. P! ant hJur8*** C ENC @tT1*J C. STATrosJ unit I N.m.
RT yya Sou1H . mistetEll@W ftpa@Aw'A J.o. *71 05 c.mL 9t.-o39 Ad dress '
Roosir Organization P.O. No., Joo No., etc.
- 3. Work Performed by G Pu tivCM.AA Type Code Symboi Stamp @
l O O f eJTf. M A C C flAAKtA.IM98 Authorization No. d l' M SAFP M Y b4I4A)_ -
3F.ASE.Y -
Expiration Date bl8 adoress 4 Identification of System Q eM C D e5 f usq l hO
- 5. (a) Appiscable Construction Code (J3 O N* 19 N Edition, M Addenda. NA Code Case (b) Applicaote Edition of Section XI Utilized for Repairs or Replacements 19 b
- 6. Identification of Components Repaired or Replaced and Replacement Components I
i ASME Code l
National Repaired, 1 Stamped ;
Name of Name of Manufacturer Board Other Year Replaced. (Yes j j Component Manufacturer Serial No. No. Identification Built or Replacement or Nol l l
, W eg se her iE.se..=) ;
l vsas.Ap(s fMeher CO. M O k. 4 (y
- V - M 4A S4 herd SJO
! I l t l
l i I l l i
! l i l
- 7. Description of Work bM kWe"N
- 8. Tests condacted: Hydrostatic 0 Pneumatic Nominal Operating Pressure 8 0: hor Pressure l00 psi Test Temp. MO *F NOTE Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 84 in. x 11 in., (2) informa-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12'82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
I FORM NIS 2 (Back)
E D ' % 48 %"V N W' 9
- 9. Remarks AppHcable Manufacturer 7 ate Reports to be ettscheo Cwfe=1 valv<- vsi. s W w x* kJo<cs.e3 c-gi;.e3 5 CERTIFICATE OF COMPLIAN We certify that the statements made in the report are correct and this nforms to the rules of the
'"E**'"*"'
ASME Code, Section Xt.
Type Code Symbol Stamp MA Certificate of Authorization No. Mb Expiration Date NA Signed W Date O 19 U owMwnervessones; Title CERTIFICATE OF INSERVICE INSPECTION i, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of DMWANI A and employed by MMOD bDM NMb U1 bMWof NTIN O have inspected the components described in this Owner's Report during the pe'riod 4 0- 17 -U to 10 - M % and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personel injury or property damage or a loss of any kind arising from or connected with this inspection.
Commission 4 M6 PA.IS U s,ase3,o.,nce. ano e noo, semen,s g ec<o,s >. 4tu,e ~ et,ona. ...,0.
Date ! 19 N (12/82) '
Page 22 of 31 FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME CcJe Section XI
- 1. Owne, Metropolitan Edison Company U '**
1-21-94 2800 Pottsville Pikesme Reading, Pennsylvania Sheet l
of I
Three Mile Ad or *** i
- 2. Plant Island Nuclear Generating Station Unit I ;
Name Rt 441 South Middletown, Pennsylvania J.O.'s 72966, 77200 Address Rooelr Oreenization P.o. No., Job No., etc.
3 Work Performed by GPU Nuclear Type Code Symbol Stamp NA ;
100 Interpace Pkwy Nem* NA Authorization No. !
Parsippany, NJ Expiration Date NA Address
- 4. Identification of System Nuclear Liquid Sampling l
S. (a) Applicable Construction Code USAS B31.7 39 69 gei,;on, NA Addende. NA Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86 i
- 6. Identification of Components Repaired or Replaced and Replacement Components j ASME Code National Repaired, Stemped Name of Name of Manufacturer Board Other Yeer Replaced, (Yes Component Manufacturer Serial No. No, identification Built or Replacement or No) 1" Globe Valve and *P"
- Pipe to Tubing Adapter NA NA CA-V-0002 NA Replaced NO l" Globe Valve and NA NA CA-V-0013 NA Repaired NO Pipe to Tubing Adapter Replaced
- 7. Description ef work Pressurizer / Letdown Sample Line Mod (CA-V-0013/CA-V-0002)
Bench Installed
- 8. Tests Conducted: Hydrostatic @ Pneumatic 0 Nominal Operating Pressure h Other O Pressure 3200/2150sl Test Temp, NA 'F NOTE; Supplemental sheets in form of lists, sketchen, or drewings may be used, provided (1) size is 8% in. x 11 in., (2) informe.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is -
recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017
FORM NIS-2 (Back)
- 9. Remarks Replaced CA-V-2/CA-V-13 with never design valves. Also installed (6)
AppHceble Manufacturers Data Reports to be attached new manual isolation valves upstream of each motor operated valve. Rerouted system tubing to facilitate change of valves.
CERTIFICATE OF COMPLIANCE Repaired We certify that the statements made in the report are correct and this Replaced conforms to the rules of the
D* ' ' ' ' ' * * * ' " * " '
ASME Code,Section XI.
Type Code Symbol Stamp Certificate of Authorization No. Expiration Date Signed ~
- Date NN N 19M '
gwn., or ogers oesienoegrie NDE/ISI Services Mgr.
I CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of __ PA and omployed by Hartford Steam Boiler I&I Co. _of Hartford. CT have inspected the components described .
in this Owner's Report during the period 11-16-91 to 10-16-93 . and state that {
to the best of my knowledge sad belief, the Owner has performed examinations and taken corrective measures described in this I Owner's Report in accordance with the requirements of the ASME Code,Section XI. I By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furtherrrore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions NB 5478(I)(N) PA-1887
,,<.o.c . s .,en. uy ~ a,,o n.. ..e,. . .t.t.. .....n... .n. . no.,s.m.,, s 1
Date # 19 (12/82) l 1
i
Page 23"of 31 i
FORM NIS.2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI i, o,ne, Metropolitan Edison Company oste 11-3~93 I 2800 Pottsville Pikesme Reading, Pennsylvania Sheet 1
of 1 Three Mile Address
- 2. Plant Island Nuclear Generating Station Unit 1 Name Rt 441 South Middletown, Pennsylvania JO 67433 Address Repair Creenization P.O. No., Job No., etc. )
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp NA 100 Interpace Pkwy Name Authorization No. NA Parsippany, NJ Expiretion Dete NA 1 Address
- 4. Identification of System Make-Up and Purification l 1
- 5. (a) Applicable Construction Code USAS B31. 7 is 69 Edition, NA Addende, NA Code Case )
(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86 l
- 6. Identification of Components Repaired or Replaced and Replacement Compenents ASME ;
Code 1 Repaired, Stamped '
National Name of Manufacturer Board Other Year Replaced, (Yes Name of Component Manufacturer, Seriel No. No. Identification Built or Replacement or No)
RC Pump A/B/C) D Seal Leak-Off (SEE RIMARKS ON UACK PAGE) Repaired NO i
l l
l
- 7. Description of Work Roo hmn rien j l
- 8. Tests Conducted: Hydrostatic @ Pneumatic Nominal Opereting #ressure i 3300 p,i 7 ,,,7e,n ,, NA .,
i Other O Pressure i
NOTE; Supplemental sheets in form of lists, sketches, or drowings may be used, provided (1) size is 8% in. x 11 in., (2) informe-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017 l
~ - . _ . _ - , _ . _ _ _ .. , _ _ , , _ _ , , _ ,
t
?
i FORM NIS-2 (Back) -
- 9. Remark.
Installation of RC Pump Seal Iniection Leak-Off provision on each of !
Appilceble Manufacturer's otte Reports to be attached the 14" Seal Iniection lines to the four Reactor Coolant Pumps. j 4
i i
5 CERTIFICATE OF COMPLlANCE We certify that the statements made in the ' report are correct and this Repaired conforms to the rules of the !
'spoir or replacement l ASME Code,Section XI.
l 1
Type Code Symbol Stamp NA l Certificate of Authorization No. Expiration Date Signed - - W Date ~ MOMi Y 19 M l pwner opner's ossight Titi. NDE/I5I Services Mgr.
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Soiler and Pressure Vesesi inspectors and the State or Province of PA and employed by Hartford Steam Boiler I&I Co. of 4 Hartford. CT h.ve inspected the components described f in this Owner's Report during the period 11-16-91 to 10-16-93 . and state that to the best of my knowledge and belief, the Owner has performed examinations end taken corrective measures described in this
]
Owner's Report in accordance with the requirements of the ASME Code,Section XI. )
By signing this certificate neither the inspector nor his employer makes any warrenty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer l shall be liable in any menner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions NB 5478(I)(N) PA-1887 f ,w tss .yn.~,e ~etional .oe,.. . tete. ,,ovin e. co .oo,-en,s Date AM 19 H2/82)
Page 24 of 31 i
FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI l
, , o,n , Metropolitan Edison Company g,,,
11-3-93 i 2800 Pottsville Pikpm* j Reading, Pennsylvania Sheet I
of 1 l j
Three Mile Addrom
- 2. Plant Island Nuclear Generating Station unit 1 Name l
Rt 441 South Middletown, Pennsylvania JO 63032, MNCR 930012 Address Repair Orsenization P.O. No., Job No., etc.
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp NA , l 100 Interpace Pkwy Name Authorization No. NA {
Parsippany, NJ Expiretion Dete NA l Address a
- 4. Identification of System Make-Up and Purification 1
- 5. (e) Applicable Construction CodeANSI B31.1 ig 67 Edition, NA Addends, NA Code Case (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repelred or Replaced and Replacement Components i
ASME Code Repaired, Stamped National '
Manufacturer Board Other Yeer Replaced, (Yes .
Name of Name of Serial No. No, identification Built or Replacement or No)
Component Manufacturer.
(SEE REMRKS ON BACK PAGE) Replaced N0 t
- 7. Description of Work See remarks on back Dane
- 8. Tests Conducted: Hydrostetic Pneumatic Nominal Operating Pressure O Other Pressure NA psi Test Temp. NA 'F NOTE; Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informe-tion in items 1 through 6 on this report is included on each sheet,and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E. 47th St., New York, N.Y.10017 l
l
FORM NIS 2 (Back)
- O
- 9. Remarks Applicable Manufacturer's Data Reports to be attached replaced with a new single modified support No. MU-54-4.
I CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and this Replaced conforms to the rules of the ASME Code, Section Xl.
Type Code Symbol Stamp Certificate of Authorization No. Expiration Date Signed h6 Date AW %Y I ;19 M wner or er's DesigneeVrltle NDE/151 Services Mgr. ;
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressurs Vessel inspectors and the State or Province of PA and employed by Hartford Steam Boiler I&I Co. of Hartford. CT have inspected the components described in this Owner's Report during the period 11-16-91 to 10-16-93 . and state that to the best of my knowledge and belief, the Owner has performed examinations and teken corrective measures described in this '
Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any menner for any personal Injury or property damage or a loss of any kind arising from or connected with this l Inspection.
/ f/ Commissions NB 5478(I)(N) PA-1887 sSt'o'r's Signaturef National Soerd, State, Province, and Endorsements Date - A 10
' l (12/82) i 1
j
l
~
Page 25 of 31 l
l FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
- 1. Owner Metropolitan Edison Company Date 4-11-94 2800 Pottsville Pike"***
Reading. Pennsylvania Sheet. 1 of 1 Three Mile Island ^***
- 2. Plant Nuclear Generatinn Station Unit 1 Name Rt 441 South Middletown. Pennsylvania J.O. 85842. EER 94-0098 Address Repelr oreenisetion P.O. No., Job No., etc.
- 3. Work Performed by CPU Nuclear Type Code Symbol Stamp NA 100 Interpace Pkwy "***
Authorization No. NA Parsionanv. New Jersev Expiration Date NA Address 4 Identification of System Makeup and Purification
- 9. (a) Applicable Construction Code USAS B31. 7 ig 69 Edition, NA Addenda, NA Code Case (b) Applicable Edition of Section XI Utilized for Hepairs or Replacements 1986
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired, Stamped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Manufacturer Serial No. No. Identification or Replacement or No)
Built 2.5" Globe Walworth Valve Company NA NA MU-V-113 NA Replaced No
- 7. Description of Work Replaced 5 of 8 body to bonnet studs which were degraded.
- 8. Tests Conducted: Hydrostatic Pneumatic Nominal Operating Pressure @
Other Pressure 2155 psi Test Temp. NA *p NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informe.
tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E 47th St., New York, N.Y.10017
i t.
i i
FORM NIS-2 (Back)
- 9. Remarks Appilcable Manufacturer's Data Reports to be attached
- I I
CERTIFICATE OF COMPLlANCE We certify that the statements made in the report are correct and this Replaced conforms to the rules of the ASME Code,Section XI. '''**'***'"*"'
Type Code Symbol Stamp NA Certificate of Authorization No. NA Expiration Date NA Signed
,,,,,o,,,,
[ ,,,n Date Amt 19
,rie,* Ngr. NDE/ISI Services ( AcnNCA CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State ;
or Province of PA and employed by Hartford Steam Boiler'I&I Co. ,, ,
Hartford. CT have inspected the components described in this Owner's Report during the period IO*O*Sb to 4*M* . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI, By sigmng this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in y manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
- 8 Ib inenscior's siongure Commissions NB 5478(I)(N) PA-1887 National Board, State, Province, and E ndorsements ;
Date 4* N 19
( (12/82)
I 1
I I
i t
Page 26 of 31 i 1
.i l
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI
\
3, o,n., Metropolitan Edison Company g,,, 11-3-93 1 I
2800 Pottsville Pikesme Reading, Pennsylvania ' Sheet I of 1 Three Mile Address
- 2. Plant Island Nuclear Generating Station unit 1 Name Rt 441 South Middletown, Pennsylvania JO 65228, MNCR 930018 Ad dress Repelr Oreenization P.O. No., Job No., etc.
- 3. Work Performed by GPU Nuclear Type Code Symbol Stamp NA 100 Interpace Pkwy Name
- Authorization No. NA l Parsippany, NJ .
Expiretion onto NA Address
- 4. Identification of System Intermediate Closed Cooling Water
- 5. (a) Applicable Construction Code ANSI B31.1 is 67 Edition, NA Addende, NA Code Case (b) Applicable Edition of Section XI utilized for Repairs or Replacements 19 86
- 6. Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired. Stemped Name of Name of Manufacturer Board Other Year Replaced, (Yes Component Serial No. No. 16entification Built or Replacement or No)
Manufacturer.
- Repaired NO Reducer (SEE REMARKS ON BACK PAGE) Replaced 6" Check Ralworth Repaired (SEE REMARKS ON BACK PAGE) NO Valve Co. Replaced 6" Check Ralworth Repaired (SEE RENARKS ON BACK PAGE) NO Valve Co. Replaced l
l
- 7. C,wir don of Work See Remarks
- 8. Tests Conducted: Hydrostatic D Pneumatic Nominal Operating Pressure Other Pressure 263 ps: Test Temp. NA *p NOTE; Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8% in. x 11 in., (2) Informe-tion in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
(12/82) This Form (E00030) may be obtained from the Order Dept., ASME,345 E 47th St., New York, N.Y.10017 ,
l i
l j
I
. - - - - . . ~ - .. . .
FORM NIS 2 (Back) g, p.m ,rg, Replaced ICCW Check Valves IC-V-13 A&B and cut-out and replaced reducer.
Applicable Manufacturer's Data Rooorts to be attached All components attached by Butt welds.
1 CERTIFICATE OF COMPLIANCE Repaired We certify that the statements made in the report are correct and this Replaced conforms to the rules of the ASME Code,Section XI.
Type Code Symbol Stamp Certificate of Authorization No. Expiration Date .
Signed AW Date *AM E 19 M g owner orgners oesiefsb. Title NDE/ISI Services Mgr.
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of PA and empioved byHartford Steam Boiler I&I Co. of Hartford. CT have inspected the components described in this Owner's Report during the period 11-16-91 to 10-Ib-93 . and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions NB 5478(I)(N) PA-1887
. ,.v , n... . _ . _ o,se_,.
r,0 s .,en.ture y ~ a ,,o n.. . o. ,. . . . .t..
Date .39x '9 1sW (12/82)