ML20086S960
| ML20086S960 | |
| Person / Time | |
|---|---|
| Site: | Brunswick  |
| Issue date: | 02/10/1984 |
| From: | NRC |
| To: | |
| Shared Package | |
| ML20086S962 | List: |
| References | |
| NUDOCS 8403060056 | |
| Download: ML20086S960 (3) | |
Text
_ _ _. - -
3 TABLE 3.3.4-1
- n h
CONTROL ROD WITHDRAWAL BLOCK INSTRUMENTATION SETPOINTS s
TRIP FUNCTION AND INSTRUMENT NUMBER TRIP SETPOINT ALLOWABLE VALUE h
1.
APRM (C51-APRff-Cll. A,B,C,0,E,F) a a.
Upscale (Flow Biased)
< (0.66W + 42%)
T*
< (0.66W + 42%)
T*
H HTPF MTPF b.
Inoperative NA NA c.
Downscale
> 3/125 of full scale
> 3/125 of full scale d.
Upscale (Fixed) i < 12% of RATED TilERMAL POWER
< 12% of RATED TilERffAL POWER 2.
ROD BLOCK !!ONITOR (CSI-RBM-Cl!. A,B)
~
a.
Upscale
-< (0.66W + 41%)
T*
< (0.66W + 41%)
T*
HTPF MTPF b.
Inoperative NA NA c.
Downscale
> 3/125 of full scale
> 3/125 of full scale h
3.
SOURCE RANGE MONITORS (C51-SRt!-K600A,B,C,D) a.
Detector not full in NA NA
[
5
__ 1 x 10 cps
< 1 x 105 cps b.
Upscale N
c.
Inoperative NA NA d.
Downscale
> 3 cps
> 3 cps 4.
INTERt!EDIATE RANGE MO,iTORS (C51-IRM-K601A,B,C,D,E,F,G,II) a.
Detector not full in NA NA b.
Upscale
< 108/125 of full scale
< 108/125 of full scale c.
Inoperative NA NA g
d.
Downscale
> 3/125 of full scale
> 3/125 of full scale g-5.
SCRDI DISCIIARGE VOLUME (Cl1-LSil-N013E) g a.
Water Level - liigh
< 73 gallons
< 73 gallons n
5
- T=2.43 for 8x8 fuel u
T=2.39 for 8x8R fuel T=2.39 for P8x8R fuel 8403060056 840210 PDR ADOCK 05000324 P
pm i
e CONTAINMENY SYSTEMS PRIMARY CONTAI?NENT LEAKAGE LIMITING CONDITION FOR OPERATION 3.6.1.2 Primary containment leakage rates shall be limited to:
a.
An overall integrated leakage rate of:
1.
Less than or equal to L,, 0.5 percent by weight of the containment air per 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> at P,,
49 psig, or 2.
Less than or equal to L, 0.357 percent by weight of the containmentairper24koursatareduct' pressure of P,
25 psig.
b.
A combined leakage rate of less than or equal to 0.60 L f r all a
penetrations and all valves listed in Table 3.6.3-1, except for main steam lihe isolation valves *, subject to Type B and C tests when pressurized to P,,
49 psig.
- Less than or equal to 11.5 scf per hour f or any one main steam line c.
isolation valve when tested at 25 psig.
APPLICABILITY: When PRUiARY CONTAIR1ENT INTEGRITY is required per Specification 3.6.1.1.
ACTION:
With:
a.
The measured overall integrated primary containment leakage rate exceeding 0.75 L, or 0.75 L, as applicable, or t
b.
The measured combined leakage rate for all penetrations and all valves listed in Table 3.6.3-1, except for main steam line isolation valves *, subject to Type B and C tests exceeding 0.60 L,
r a
The measured leakage rate exceeding 11.5 scf per hour for any one c.
main steam line isolation valve, restore: The overall integrated leakage rate (s) to less than or equal to a.
0.75 L, or 0.75 L, as applicable, and t
b.
The combined leakage rate for all penetrations and all valves listed in Table 3.6.3-1, except for main steam line isolation valves *,
subject to Type B and C tests to less than or equal to 0.60 L,, and
- Exemption to Appendix "J" of 10 CFR 50.
BRUNSWICK - UNIT 1 3/46-2 Amendment No. 65
CONTAINMENT SYSTEMS PRIliARY CONTAIN'!ENT LEAKAGE LIMITING CONDITION FOR OPERATION 3.6.1.2 Primary containment leakage rates shall be limited to:
a.
An overall integrated leakage rate of:
Less than or equal to L 0.5 percent by weight of the 1.
containment air per 24 $o,urs at P,,
49 psig, or 2.
Less than or equal to L 0.357 percent by weight of the t
containment air per 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> at a reduced pressure of P,g 25 psig.
b.
A combined leakage rate of less than or equal to 0.60 L for all penetrations and all valves listed in Table 3.6.3-1, ex, cept for main steam line isolation valves *, subject to Type B and C tests when pressurized to P,,
49 psig.
c.
- Less than or equal to 11.5 sef per hour f or any one main steam line isolation valv when tested at 25 psig.
APPLICABILITY: When PRIMARY CONTAI?tiENT INTEGRITY is required per Specification 3.6.1.1.
ACTION:
With:
a.
The measured overall integrated primary containment leakage rate exceeding 0.75 L, or 0.75 L, as applicable, or g
b.
The measured combined leakage tate f or all penetrations and all valves listed in Table 3.6.3-1, except for main steam line isolation valves *, subject to Type B and C tests exceeding 0.60 L,,
or c.
The measured leakage rate exceeding 11.5 scf per hour for any one main steam line isolation valve, restore:
a.
The overall integrated leakage rate (s) to less than or equal to 0.75 L, or 0.75 L, as applicable, and g
l b.
The combined leakage rate for all penetrations and all valves listed in Table 3.6.3-1, except for main steam line isolation valves *,
subject to Type B and C tests to less than or equal to 0.60 L,, and
- Exerotion *o Appendix "I" of 10 CFR 50.
BRUNSWICK - UNIT 2 3/46-2 Amendment No. 91 l
l