ML20084P719

From kanterella
Jump to navigation Jump to search
Requests Expansion Test to Prove Movement of Auxiliary Piping Sys Connected to Reactor Vessel Be Regarded as Startup Test
ML20084P719
Person / Time
Site: Nine Mile Point Constellation icon.png
Issue date: 06/26/1970
From: Burt P
NIAGARA MOHAWK POWER CORP.
To: Morris P
US ATOMIC ENERGY COMMISSION (AEC)
Shared Package
ML19289B377 List:
References
NUDOCS 8306130010
Download: ML20084P719 (1)


Text

-

.. I & GOVERNMENT ATCMIC ENERGY COMM QTRS N M $ MILE OSW g g g ,p

\710-547-0657 6-26-70 10\00 A.M. 0!sELEf ATTENTIOM\ DR. PETER A. MORRIS, DIRECTOR DIVISION OF REACTOR LICENSING

,5 ? ' S GENTLEMEN \ ,

[ - -,

~

t. .. E t- .7 g SUBJECT \ DOCKET NO. 50-220 h. 4 t

[

P.O.L. \DPR-17 .h ,b h FLEASE REFER TO OUR SUBMITTAL DATED MAY 11,1970,_ ENTITLED " PROGRAM FOR RESTORATION TO SERVICE OF NINE MIL,E, POINT _ NUCLEAR _STATI0il." j FAGE 2-1, PARAGRAPH 3, REGUIRES SURVIILLANCE DURING TFE IMITIAL HEAT /

It G IN A STEP-WISE FASHICM, UHEREBY RESTRAINT IN ANY SYSTEM WOULD BI DETECTED EARLY IN THE TEST. NUCLEAR HEATI!;G - AT A VERY LO'J FOUER LEVIL WILL BE REQUIRED FOR SEVERAL DAYS.

IT IS DESIRED THAT THIS TEST BE ACCEPTED WITHIN THE Cot! CEPT OF START-UP TESTING AS SET FORTH IN TECHNICAL SPECIFICATIONS FOR THE FACILITY Ifl PARAGRAPH 3.3.I \A\ PAGE 6C. INERTING OF THE PRIMARY COMTAINf:Et!T BEFORI COMPLETION OF TEST WOULD PREVEMT- PROPER SURVEILLA!!CE FOR SAFETY ASSURANCE ANL DEFEAT THE PURPOSE OF THE TEST. UPON SUCCESSFUL TIST CO::PLETION, NORMALLY APFLICABLE PROCEDURES IN PARAGRAPH 3.3.I \B & C\

WILL BE ADHERED TO.

T"E STATION OPERATIONS REVIEW COMMITTEE WITH TkE CONCURRENCE OF THE s

SAFETY REVIEU AMD ' AUDIT D3ARD CONCLUDE THAT THE TESTING WILL BE DONE WITHIN THE FRAMEWORK OF THE SPECIFICATIONS, AMD THERE IS MO UNRESOLVFD SAFETY OUESTION OR UNDUE HAZARD TO THE GEN,ERAL PUBLIC.

. $lb '

- ~% P. A. BURT

, gj9 ,

gg jg STATION SUPERINTENDENT ,

'. NINE MILE POINT NUCLEAR STATION

" 7 NIAGARA MOHAWK POWER CORPORATION

/} J 26190

[ flHW Q [ copy SENT REGION _

1 mm .