ML20071E810
| ML20071E810 | |
| Person / Time | |
|---|---|
| Site: | Harris  |
| Issue date: | 03/03/1983 |
| From: | Parsons R CAROLINA POWER & LIGHT CO. |
| To: | James O'Reilly NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION II) |
| References | |
| CON-NRC-46, REF-PT21-83-759-000 10CFR-50.55E, PT21-83-759, PT21-83-759-000, NUDOCS 8303140330 | |
| Download: ML20071E810 (4) | |
Text
.
1.
. men
' ; y j; r,
,p Carolina Power & Light Company P. O. Box 101, New Hill, N. C.
27562 March 3, 1983 t)) p,n 3 7 pjg, 3g Mr. James P. O'Reilly NRC-46 United States Nuclear Regulatory Commission Region II 101 Marietta Street, Northwest (Suite 3100)
Atlanta, Georgia 30303 CAROLINA POWER & LIGHT COMPANY SHEARON HARRIS NUCLEAR POWER PLANT 1986 900,000 KW - UNITS 1 & 2 SOLID STATE PROTECTION SYSTEM, PURCHASE ORDER NY-435002, ITEM 100
Dear Mr. O'Reilly:
Attached is an interim report on the subject item which was deemed reportable per the provisions of 10CFR50.55(e) and 10CFR, Part 21, on October 12, 1982.
The vendor (Westinghouse) has evaluated these deficiencies and is designing a modification to correct the reported condition.
It is currently projected that corrective action and submission of the final report will be accomplished by January 12, 1984.
Thank you for your consideration in this matter.
Yours very truly, W
1 ? : %%*-
R. M. Parsons Project General Manager Shearon Harris Nuclear Power Plant RMP/sh Attachment cc:
Mr. G. Maxwell (NRC-SHNPP)
Mr. V. Stello (NRC)
WFlCLAL COPp.ei 8303140330 830303 g g d Z. f PDR ADOCK 05000400 S
t CAROLINA POWER & LIGHT COMPANY SHEARON HARRIS NUCLEAR POWER PLANT UNIT NO. 1 Interim Report Solid State Protection System Item 100 March 1, 1983 Reportable Under 10CFR50.55(e) and 10CFR21 l
l l
l l
l l
.A-
SUBJECT:
Shearon Harris Nuclear Power Plant, Unit 1 10CFR50.55(e) and 10CFR Part 21, reportable deficiency design in the Solid State Protection System (SSPS) purchased under Purchase Order NY-435002, Westinghouse Shop Order 300 ITEM:
On-line test circuit for the SSPS SUPPLIED BY:
Westinghouse Electric Corp., Pittsburgh, Pennsylvania NATURE OF DEFICIENCY:
The subject Unit 1 equipment has been received at the Shearon Harris plant. Basic equipment design is not unique to the Harris Plant.
During a review of the schematic diagram of the SSPS, Westinghouse engineers discovered that an undetectable failure could occur in the on-line test circuits.
This consists of a normally closed contact (s) in a safeguards circuit (s) that is purposely opened during the test.
Reclosure of the contacts when testing is complete cannot be verified with present design.
DATE PROBLEM OCCURRED:
Problem was verified by Westinghouse on August 3,1982.
DATE PROBLEM REPORTED:
September 9, 1982 - CP&L (N. J. Chiangi) notified the NRC Region II (A. Hardin) that this item was potentially reportable under 10CFR50.55(e) and 10CFR21.
October 12, 1982 - CP&L (L. Jones) notified the NRC Region II (A. Hardin) that this item was reportable under 10CFR50.55(e) and 10CFR21.
t s.
SCOPE OF PROBLEM:
The SSPS is redundant, Trains A and B.
Either train will actuate the safeguards system.
Each train has sixteen (16) of the subject contacts.
Failure of one (1) or more contacts to reclose in Train A would block operation of a part of the safeguards system if the like contact in Train B also failed to reclose. A total of thirty-two (32) contacts must be verified.
SAFETY IMPLICATION:
As stated in " Scope of Problem", failure of a single contact in Train A and Train B, which perform the same safeguards function, would make this safeguards function inoperable. Additional like failures would render further safeguards functions inoperable.
REASON DEFICIENCY IS REPORTABLE:
The safeguards system could be rendered inoperable.
CORRECTIVE ACTION:
Westinghouse is continuing to review its design prior to change recommendations.
For this interim period, Westinghouse has revised test procedures for operating plants to verify contact reclosure.
Since Harris Plant is still in the construction stage, CP&L will take corrective action as mutually decided and agreed upon by Westinghouse and CP&L.
Present design revision intent will negate revised test procedure. The original procedure will be valid.
FINAL REPORT:
A final report will be issued when the Westinghouse study has been completed and satisfactory corrective action has been taken.
The projected final report date is January 12, 1984.