ML20045F736
| ML20045F736 | |
| Person / Time | |
|---|---|
| Site: | Dresden  |
| Issue date: | 03/24/1993 |
| From: | COMMONWEALTH EDISON CO. |
| To: | |
| Shared Package | |
| ML20045F733 | List: |
| References | |
| TDI-515, NUDOCS 9307080318 | |
| Download: ML20045F736 (16) | |
Text
.
TDI-515 R'avision 4 March 1993 Trainino Department In st nsetioJ Fuel Handler Continuino Trainine A.
Introduction Fuel Havler Continuing Training (FHCT) is designed to maintain and upgrade _ae knowledge and skills acquired in the Fuel Handler Initial Training program.
THCT also is used to provide initial training on selected infrequently performed tasks.
The program censists of FHIT lesson plans which are presented on a recurring basia, a pre-refueling outage training package, and topics requested for training by the Fuel Handling Program Training Committee.
Fuel Handler Continuing Training is mandatory for Fuel Handlers and Senier Reactor Operator Limited To Fuel Handling (SRO-L) personnel.
The, FHCT program will normally be presented in an instructor facilitated lecture / discussion format.
Selected topics may also be presented by the Station Nuclear Engineering Group, Production Training Department Mechanical Maintenance Training Group, and Fuel Handling Department Line Management.
B.
Proarse structure 1.
Prior to each refueling outacc, the FHCT Pre-Refueling Outage Training Package will be p;esented to - all members of the Fuel Handling Department.
P.tqr.nment A is the syllabus for the FHCT Pre-Refueling Outage Training Package.
2.
A minimum of 40 hours4.62963e-4 days <br />0.0111 hours <br />6.613757e-5 weeks <br />1.522e-5 months <br /> par year of training in addition to the Pre-Refueling Outage Trrining Package in required. This 40 hours4.62963e-4 days <br />0.0111 hours <br />6.613757e-5 weeks <br />1.522e-5 months <br /> of training will cover FHIT lesson plans on a recurring basis, industry events, procedure changes, required topics (see Attachment B),
infrequently performed tasks, and topics requested by the Program Training Committee.
3.
Actual program content will be determined by the Fuel Handl.ng Program Training Committee in accordance with TDI-103, Procram Trainine committee. This committee ir tonvened, as a minimum, on an annual basis.
4.
Infrequent tasks will be selected by the Program Training Committee for training.
Training on these tasks could include classroom lectures, On-the-Job Training, On-the-Job Evaluations or formal pre-job briefings. Any combination of these training settings may be
- used, as determined by the Program Training Committee, and documented on Form A, IpAividual Trainine Record.
C.
Instructor Trainine cualification Information 3
1.
The instructional qualification level for a Training Department member to teach this course shall be a Level I certification in accordance with NOD-TQ. 7, In et ru cter Oualifiention Procram.
The Dresden Station procedure tcsr qualification and certificatien of instructors is *DI-202, Inytructer certificatien.
2.
The technical qualification level for a Training Department member to teach this course will be any combination of the followings prior experience in Fuel Handling.
a.
b.
an NRC Senior Reactor Operator License or Certification.
1 999 93070B0310 930702
(
[
PDR ADOCK 0500 0
P
TDI-515 Ravision 4 March 1993 i
c.
an NRC Senior Reactor Operator License Limited to Fuel Handling.
i 3.
Subject matter experts may be used as instructors in accordance with TDI-204, Use of Non-certified Instructors. Subject matter experts are individuals who have demonstrated expertise and knowledge of given systems or subjects by virtue of previous job assignments, experience, education or training, or holding various plant positions.
+
4.
Trainers for OJT shall be qualified in accordance with TDI-205, gn-1]1e-Job Trainine (OJT) Trainer Ocalification.
Evaluators for OJT l
shall be qualified in accordance with TDI-206, On-the-Job Traininc i
f0JTi Evaluator Qualification.
I r
D.
Prouram Prereouisites There are no prerequisites for any person to attend Fuel Handler
)
Continuing Training. Any employee with a desire to learn more about fuel handling activities may attend.
i E.
Trainee Evaluation Scheme i
1.
During each FHCT session, a written examination shall be administered over a representative sample of the knowledge objectives for each lesson plan covered during that session, t
2.
Examinations shall be developed and administered in accordance with
[
TDI-902, g, amination Security and Inteerity, and TDI-412, x
Examination construction and Analysis, and TDI-500, Ooerations Trainine Reference Documentation. Because the Fuel Handler Training Exam Bank is not dynamic, examinations for FHCT will be developed as needed. However, each examination item shall be carefully reviewed to assure the requirements of TDI-412, Examination Construction and Analysis, are fulfilled. As examination items are developed, they should be entered into the cmputerized exam bank system for future use.
3.
A grade of 80% or greater shall be considered passing.
4.
For grades less than 80%, the trainee shall be orally remediated by the Course Administrator and the actions taken documented on TDI-500 Form F, Trainee Performance Interview.
5.
On-the-Job Training (OJT)
I When OJT is required as part of continuing Training, crainees a.
are assigned to the Fuel Handling Department to compiete the OJT.
Satisfactory completion is measured by obtainLng all of the following signatures in accordance with the instructions provided on the OJT Card:
1)
Fuel Handler Trainer's signatures for each task.
I 2)
Fuel Handling Supervisor's evaluation signature for each task.
l 3)
Fuel Handling Supervisor's signatures for each oral I
walk-through at the end of the OJT Card.
4)
Fuel Handling Supervisor's signature for each system checkout in the OJT Card.
j I
2
[
6 4
-~
p TDI-515 l
Ravicion 4 March 1993 i
b.
OJT Trainers shall be qualified in accor dance with TDI-205, On-the-Job Trainino (OJT) Trainer Oualification, The Fuel Handling Supervisors will perform OJT Evaluations.
c.
They shall be qualified in accordance with TDI-206, On-the-Job
[
Trainino (OJT) Evaluator Oualification.
6.
Trainee Evaluations Evaluations will be performed periodically throughout the training j
period.
These will include evaluations on the trainee, class instructors, Course Administrator, and the overall course.
These I
evaluations are used to determine the quality of the training program. The following fomo shall be used for evaluationst a.
Lecture Evaluation (TDI-500 Form C) b.
OJT Performance Aooraisal (TDI-500 Form E) c.
Trainee Performance Interview (TDI-500 Form F) d.
Continuino Trainino Cvele Evaluation (TDI-500 Form I) e.
Oral Interview (TDI-500 Form H)
F.
Trainina Records All of the records for this program are to be initiated by the Course Administrator and maintained in accordance with TDI-404, Trainino Procram Records, and TDI-500, Ooerations Trainino Reference Documentation.
1.
An Attendance Sheet shall be filled out at the completion of each training session. The course length shall be the actual number of classroom hours spent. The comments section should state the lesson plan numbers of the lesson plans presented, or " Pre-Refueling Outage Training Package", whichever.is applicable.
Couree Code Description D-FHCX Fuel Handler Continuing Training 2.
Examinations - All examinations that are used as means of determining an individual's qualification shall be retained including the " Examination Cover Sheet," TDI-500 Attachment B, and the " Examination Verification Checklist," *[DI-500 Attachment C.
The trainee's graded exam shall be placed in his training record. The exam key and above attachments shall be kept by the Course Training Program Adminicter.
3.
On the Job Training Qualification Card The completed OJT Card shall be placed in the trainee's training record.
4.
TDI-500 Form E, Trainee Performance Interview, when used, shall be placed in the trainee's training record.
5.
Class Record - This record is a collection of pertinent information to be used for program improvements, Program Training Committee Meetings, and Audits and Assessments.
Copies of the following checklists, feedback, and evaluation forms should be maintained by the Course Administrator in the Class Record:
a.
TDI-500 Form A, Course Poster.
b.
TDI-500 Form C, Lecture Evaluation.
c.
TDI-500 Form I, Continuino Trainino Cvele Evaluation.
3 4
TDI-515 i
R3 vision 4 i
March 1993 d.
TDI-500 Form H, Oral Interview.
e.
TDI-404 Form A, Procram Information Record.
G.
Trainino Schedule
-l 1.
A minimum of 40 hours4.62963e-4 days <br />0.0111 hours <br />6.613757e-5 weeks <br />1.522e-5 months <br /> per year will be devoted to FHCT, exclusive of the Pre-Refueling Outage Training Package.
2.
The Pre-Refueling outage Training Package shall be presented prior to each refueling outage.
All licensed and non-licensed Fuel Handlers shall attend. The training session should be scheduled to occur during the month prior to the start of the outage, leaving sufficient time for remediation of any examination failures.
H.
Proorae Maintenance Fuel Handler Continuing Training program maintenance will be performed in accordance with the TDI-402, Trainino Prooram Maintenance.
I.
Procrrae Evaluation L
Program evaluati6na will be pe: formed in accordance with TDI-403, Trainino Procram Evaluations. The feecback from the program evaluations may be a i
source of revision for the training program as described in TDI-402, Trainine Procram Maintenance.
Other sources of feedback may originate from the evaluations required in Section E (Trainee Evaluation Scheme) of this instruction.
i 6
J.
References 1.
TDI-103, Procram Trainino Committee.
2.
TDI-202, Instructor certification.
3.
TDI-203, Instructor continuino Trainino.
4.
TDI-204, Use of Non-Certified Instructors.
5.
TDI-205, on-the-Job Trainino (OJT1 Trainer oualificatien.
6.
TDI-206, On-the-Job Trainino f0JTl Evaluator Oualification.
7.
TDI-401, Procram Develooment.
8.
TDI-402, Trainine Procram Maintenance.
9.
TDI-403, Trainina Procram Evaluations.
10.
TDI-404, Trainine Procram Pecords.
11.
TDI-406, Poet Trainine Evaluations.
12.
TDI-412, Examination construction and Analysis.
13.
TDI-500, operations Trainino Peference Documentation.
14.
TDI-902, Examination Security and Inteeritv.
15.
NOD-TQ.7, Instructor Oualification Procram.
4 1
- ~
I TDI-515 Revision 4 March 1993 16.
NOD-TQ.12, conduct of Trainino.
17.
Dresden Station Response to NRC Confirmatory Action Letter-i CAL-R-III-91-0149.
i 18.
DVR-12-3-91-08704 Training Commitment.
19.
ACAD 91-015, The obiectives and criteria for Accreditation of Trainine in the Nuclear Power Industry.
/
Approved byt
) MY r
l oper 16ns Manager I
Date Approved by:
nb MM d
e Training Supervisor Date 5
i s
Dresden Training Departrnent.
}
Fuel Handler Pre-Refueling Outage Trnining Package SYLLABUS 1.
Management Expectations. This discussion is to be presented by the Operations Manager or the Fuel Handling Operating Engineer and is to include a discussion of the following topics:
i a.
Independent Verification R.equirements, b.
SelfOecking, i
c.
Reactivity Management, d.
Procedure Usage and Adherence, Areas of Supervision, Administration, and Expectations.
e.
t 2.
Procedure Usage and Adherence (lesson plan number 104F-02) 3.
Communication Oesson plan number 299F-01) i 4.
Refueling Interlocks Oesson plan number 201F-03)
[
5.
Refueling Accidents (lesson plan number 195F-01) 6.
Nuclear Materials Transfer Checklist Oesson plan number 299F-02) 7.
DFP 800-1 discussion / review to be performed by the Fuel Handling Supervisor.
I 8.
Outage agenda and planned activities discussion and procedure review to be performed by the Fuel Handling Supervisor.
9.
Written Examination s'
t t
i d
i i
i i
l l
4 L
i TDI-515 Attachment A Rev.1 (03/93) l l
Dresden Training Department Fuel Handler Continuing Training Required Topics The following topics have been committed through station or company response to regulatory requirements for incorporation into the Fuel Handler Continuing Training Program.
Topic Frequency Source 1.
Pre-Refueling Outage Training Prior to each refueling Station response to NRC Package outage CAL-R-III-91-014 2.
CECO New Fuel, New Fuel Channel, Bi-annual TDI-922 and Channel Fastener Qualification Attachment B TDI-515 Rev. 0 (12/92)
Dresden Trnining Department Fuel Handler - Individual Training Record i
Fuel Handler's Name:
Task
Title:
i Prerequisite Training Required:
{
O None 1.
2.
3.
Site Specific Training Required:
O None O Pre-job Briefimg O Classroom Lecture - Lesson Plan Title / Number O Other (List) 1.
2.
On-the-Job Training /On-the-Job Evaluation O None O OJT Training Required - Conducted By:
Signature /Date O OJT Evaluation Required - Conducted By:
Signature /Date Training Requirements Completed l
Fuel Handler Supervisor:
Signature /Date
{
1 i
l C
Form TDI-515-A Rev. 0 (12/92)
P i
11/10/92 Page 1 of 4 FUEL HANDLING TASC LIST Task # Task Description 223F001 Remove new fuel from Metet Shipping Container.
223F002 Move blade guide from reactor to Spent Fuel Storage Poot.
223F003 Install fuel su mort piece in reactor.
223F004 Remove fuel su m ort piece fr m reactor.
223F005 Remove control rod blade from reactor and store in Spent Fuel Storage Pool.
223F006 Install control rod blade in reactor.
223F007 Inspect new control rod blade.
223F008 untatch control rod blade with smistching tool.
223F009 untatch a control rod blade with a J Mook.
223F010 Move a blade guide from the Spent fuet Storage Pool to the reactor.
232F001 Clean and inspect new fuel.
232F002 Receive new fuel and transfer Wooden Shiming Containers to refuel floor.
2327003 Remove the Metal Shipping Container from the Wooden Shi ming Container and open the Metal Shipping Container.
t 232F004 Place new fuel in the New Fuel Inspection Stand or transfer to the New Fuel Storage Vault.
232F005 Clean and inspect new fuel channels.
232F006 Instalt new fuel channels on new fuel.
232F007 Deleted 232F008 Move fuel from the Spent Fuel Storage Poot to the reactor.
232F009 Move fuel from the reactor to the Spent Fuel Storage Pool.
232F010 Move U-1 fuel.
234F001 Move new fuel f rom the New Fuel Storage Vault to the New Fuel inspection Stand.
234F002 Move new fuel from the New Fuel Storage Vault to the U-2 Spent Fuel Storage Pool.
234F003 Move new fuel from the New Fuel Storage Vault to the U-3 Spent Fuel Storage Pool.
234F004 Operate the fuel Prep Machine.
234F005 Remove or install the Spent Fuel Storage Pool gates.
234F006 Inspect and Operate the U-1 Spent Fuel Storage Poot grapple.
234F007 Perform undoctanented visual inspection of cranes, hoists, and grapples.
234F008 operate the U-2/3 Reactor sullding overhead Crane.
234F009 operate the U-1 crane.
234F010 Inspect the U-1 overhead crane.
11/10/92 Page 2 of 4 FUEL HANDLING TASK LIST Task # Task Description 234F011 Operate the chamet measuring device.
234F012 Set-w and operate a sutnersible ptmp on the fuel smport top guide.
234F013 set-up and operate equipment for vacutning the Spent Fuel Storage Pools.
234F014 Transport the TN R-52 cask frein tower tevet (517) to refuel floor (613).
234F015 Load spent fuel into the TN R-52 fuel cask.
234F016 Transport the GE Modet 1600 cesk from the traiter to the refuel floor.
234F017 Prepare the TN R-52 cask for transportation.
234F018 Load radioactive materlat into GE 1600 cask.
234F019 Prepare GE 1600 cask for transportation.
234F020 1ransport the Chem-Nuclear Model 3-55 cask from traiter to refuel floor.
234F021 Load the Chem-Nuclear Model 3 55 cask.
234F022 Prepare the Chem-Nuclear Modet 3-55 cask for transportation.
234F023 Transport NLI cask from traiter to refuel floor.
234F024 Load fuel into NLI fuel cask.
234F025 Prepare NLI cask for transportation.
234F026 Operate U 2/3 fuel gramle.
234F027 Instatt inserts into high density storage rack.
234F028 Instatt plugs in Recirculation System suction nozzles.
234F029 Remove Recirculation System suction notate plugs.
234F030 Perform visual inspection of blade guide.
234F031 Load cask on trailer.
234F032 Remove LFRM Frors reactor.
234F033 Instatt LPRM in reactor.
234F034 Install nut, washerw and seats on LPRM.
234F035 Instatl LPRM into strongback.
234F036 Remove and replace SRM and IRM detectors.
234F037 Remove sRM/IRM tip with or without disposal cask.
234F038 Instatt and operate the control Rod Grapple.
234F039 Instatt and operate the Jet Ptsy Grapple.
234F040 Secure mechanical cable terminal to monorail or frame holst.
m
. _ - _ - --2 _ -,_ _
2
..a.
+.
11/10/92 Page 3 of 4 ftEL MANDLING TASK Li$i fask 8 Task Description 234F041 Move fuel within the Spent Fuel Storage Pool using the Jet Pwp Grapple.
298F001 Instatt plugs in pecirculation system Jet pwp discharge nozzles.
298F002 Remove plugs f rom Recirculation systm jet psp nozzles.
. 298F003 Maintain reactor, spent Fuel Storage Pool, and New Fuel Storage Vault tag boards.
29BF004 Don and remove respiratory equipnent.
298F005 Don and rewove protective clothing.
298F006 set.up ard operate urderwater camera.
298F007 Perform a visual inspection and operate the Refueling Bridge monorail hoist.
298F008 Perform a visual inspection and operate the New Fuet storage Vault jib crane.
2987009 Perform a visual inspection and operate the Refueling Bridge frame hoist.
298F010 Operate vacuta sipping equipnent.
298F011 Instatt and remove underwater lights frcwa reactor and Spent Fuel Storage Pools.
2987012 set-up ord operate wall a<d floor washer.
298F013 Place Refuel Bridge electrical and air supplies in service.
298F014 Respond to high radiation alarm on refuel floor.
298F01$ Assecble and evacuate personnet from refuel floor.
298F016 Perform radiological work in accordance with RWP.
298F017 Set-up and operate sonic cleaner.
1 298F018 Provide fuel handler On-the-Job-Training (0JT) to assigned personnel.
298F019 Design and layout signs for the Gate House Sign Boards.
298F020 Perform sign painting.
2987021 Set-up and operate conputer in sign shop.
298F022 Adjust and operate sign beveler.
298F023 Operate and adjust cutting saw in sign shop.
298F024 Decontaminate various tools, equipment, and work areas.
298F025 Property rig a heavy load.
298F026 Assist in performance of reactor in-vessel inspections.
298F027 Locate posted procedures.
298F028 stpervise confined space entries in accordance with DAP 3-14.
298F029 Stock and keep storage areas clean.
.-r
n
- r v
~
--.r-
.-n-
-. -,.~
w~,
i 11/10/92 Page 4 of 4 FUEL MANDL!hG IASK LIST task # fask Description
, 298F030 Perform work with calibrated measuring tools.
298F031 Prevent the intrusion of foreign materiets into the Reactor Vessel, Fuel Storage Pools, and New Fuel Vault.
29BF032 control activities of personnel on refuel floor during refueling.
298F033 Maintain control over temorary openings in secondary contairunent.
298F034 Maintain good house keeping in U-1.
i 298F035 Perform work over en open reactor vesset.
298F036 Operate large power tools.
298F037 Operate small power tools (electric saws, dritts, etc.).
298F038 Perform the duties of the second Verifier during core alterations and fuel moves.
298F039 operate the U-2 Reactor Building trackway interlock Doors.
298F040 Know the responsbilities and expectations of a fuel handler.
298F041 Respond to personnet injuries.
298F042 Respond to a fire.
298F043 Establish and maintain communications with the Contret Room during core alterations.
298F044 Report abnormat and emergency situatiora.
298F045 Gain access to the New fuel Storage Vault.
298F046 Perform duties of Signalman during crane operation.
298F047 set crane limit switches prior to operating the reactor building crane in the restricted mode.
298F048 Perform tests of fuel grapple interlocks and refueling interlocks.
298F049 operate underwater air grathers.
298F050 Vectam the New fuel Storage Vault.
298F051 Set-tp and operate guide ttbe vacutming equipment.
298F052 Peeove a control rod guide tube fram the reactor.
298F053 It 'all s' control rod guide tube in the reactor.
p
~
m
-. - - - -. -. ~
=
i Image Undo AutoRefresh DO-IT!
e
.=[..]
data entry / edit
{ * ]==t A
Task #:
232F010 Type Series 3
System #:
232000 Procedure:
DFP 0800 027
.3 FH A:
x
.4 FH B:
x INPO Ref:
Infrequent:
x Program:
SROL:
x
.e Init:
Cont:
x OJT:
Fund:
2 Sim 1:
U Sim 2:
Lesson Plans:
s Sim 3:
2 Sim 4:
3 Task Description E
Move U-1 fuel.
3 d
Terminal Knowledge Objective
.s
.3
.2 m.$ '
Y 20 of 114
- EstidiMgs m F4MgnisNjie? MJT 1eiiiffss@gszy essha#7m3ffiswissaW F1 Lookup F7 Table Ctrl-PgUp Prev Ctrl--PgDn Next
[
CoEdit l
l i
I n View Ask Report Create Modify Image Forms Tools Scripts Exit
-[.
]
data entry / edit
[t]=S A
Task #:
234F006 Type Series
[
System #:
234000 Procedure:
DFP 0800 025
>A FH A:
x E
FH B:
x INPO Ref:
Infrequent:
x Program:
SROL:
x n
Init:
Cont:
x OJT:
Fund:
R Sim 1:
5 Sim 2:
Lesson Plans:
-5 Sim 3:
j Sim 4:
=
E Task Description h
Inspect and operate the U-1 Spent Fuel Storage Pool grapple.
h im 1
Terminal Knowledge Objective j
e 3y 26 of 114
- EssM@sjEBMPgRE EfM@B144=EMMedisjfdsd@M M M d7n1*J F1 Help F7 Table Ctrl-PgUp Prev Ctrl-PgDn Next Alt-F9 ~ CoEdit l Main l
t
a View Ask Report Create Modify Image Forms Tools Scripts Exit
, t. s ]
data entry / edit
[t]=g !
A I Task #:
234F009 Type Series System #:
234000 Procedure:
DFP 0800 025
.Rj FH A:
x Iii l FH B:
x INPO Ref:
Infrequent:
x Program:
'Il SROL:
x Init:
Cont:
x OJT:
Fund:
Sim 1:
Sim 2:
Lesson Plans:
2 Sim 3:
j' Sim 4:
=
Task Description Operate the U-1 crane.
R
$u Terminal Knowledge Objective a
Li A
Y 29 of 114
<hTi s sg!E 5313;f?g E E M 5 $ $fR = EP,E M E Ei & 51M M 57c h K W5 5 5> J F1 Help F7 Table Ctrl-PgUp Prev Ctrl-PgDn Next Alt-F9 CoEdit l Main j
t
l t
e View Ask Report Create Modify Image Forms Tools Scripts Exit
[- = ]
data entry / edit
(*]=g FH TASKLIST A
=
Task #:
234F010 Type Series
%l System #:
234000 Procedure:
DMP 5800 001 3
FH.A:
x E
FH B:
x INPO Ref:
Infrequent:
x Program:
7 SROL:
x 0
Init:
Cont:
x OJT:
Fund:
- I Sim 1
3 Sim 2:
Lesson Plans:
'O Sim 3:
Sim 4:
Task Description
'R Inspect the U-1 overhead crane.
.3 3
3 Terminal Knowledge Objective 3
Ea
- 3 I
30 of 114 dj?&MsijWiggMg;gg@ggg = EDTEWEsRMIMMAEF5ffEqjggggg>J F1 Help F7 Table Ctrl-PgUp Prev Ctrl-PgDn Next Alt-F9 CoEdit ]
Main l
-