ML20015A413
ML20015A413 | |
Person / Time | |
---|---|
Site: | Quad Cities ![]() |
Issue date: | 01/15/2020 |
From: | Exelon Generation Co |
To: | Division of Operating Reactor Licensing |
Arora S | |
Shared Package | |
ML19319A918 | List: |
References | |
Download: ML20015A413 (141) | |
Text
QUAD CITIES UFSAR 13.0 CONDUCT OF OPERATIONS TABLE OF CONTENTS Page 13.0 CONDUCT OF OPERATIONS ................................................................................ 13.1-1 13.1 ORGANIZATIONAL STRUCTURE .......................................................... 13.1-1 13.1.1 Corporate Management and Technical Support Organization ....................................................................... 13.1-1 13.1.1.1 Corporate Organizational Arrangement ... 13.1-1 13.1.1.2 Operating Responsibilities ......................... 13.1-1 13.1.2 Plant Operating Organization ........................................... 13.1-1 13.1.2.1 Plant Personnel Responsibilities and Authorities .................................................. 13.1-1 13.1.2.2 Operating Shift Crews ................................ 13.1-1 13.1.3 Qualifications of Nuclear Plant Personnel......................... 13.1-3 13.1.3.1 Qualification Requirements ........................ 13.1-3 13.1.4 References ............................................................................ 13.1-4 13.2 TRAINING ................................................................................................. 13.2-1 13.2.1 Plant Training Programs ................................................... 13.2-1 13.2.1.1 General Training Programs ....................... 13.2-1 13.2.1.2 Operations Department Training .............. 13.2-3 13.2.1.3 Maintenance Department Training ......... 13.2-5a 13.2.1.4 Technical Services Training ...................... 13.2-7 13.2.1.5 Radiation Protection Technician Training 13.2-7 13.2.1.6 Chemistry Technician Training ................. 13.2-8 13.2.1.7 Contractor Training .................................... 13.2-9 13.2.1.8 Fire Brigade Training ................................. 13.2-9 13.2.2 Replacement Training ....................................................... 13.2-9 13.2.3 Applicable NRC Documents ............................................... 13.2-9 13.3 EMERGENCY PLANNING ...................................................................... 13.3-1 13.4 REVIEW AND AUDIT ............................................................................... 13.4-1 13.5 PLANT PROCEDURES ............................................................................. 13.5-1 13.5.1 Administrative Procedures ................................................ 13.5-1 13.5.1.1 Conformance with Federal Guidelines ...... 13.5-1 13.5.1.2 Preparation of Procedures .......................... 13.5-1 13.5.1.3 Procedures ................................................... 13.5-2 13.5.2 Operating and Maintenance Procedures........................... 13.5-3 13.5.2.1 Operating Procedures ................................. 13.5-4 13.5.2.2 Other Procedures ........................................ 13.5-5 Revision 14, October 2017 13-i
QUAD CITIES UFSAR TABLE OF CONTENTS (Continued)
Page 13.6 SECURITY ................................................................................................. 13.6-1 13.7 RECORDS .................................................................................................. 13.7-1 13.7.1 Control Room Records ........................................................ 13.7-1 13.7.2 Computer Records .............................................................. 13.7-1 13.7.3 Logs ..................................................................................... 13.7-2 13.7.4 Plant Operations Records .................................................. 13.7-2 13.7.5 Review Committee Transactions ....................................... 13.7-2 13.7.6 Reports ................................................................................ 13.7-2 13.7.7 Radiological and Chemical Records................................... 13.7-2 13.7.8 Maintenance Records ......................................................... 13.7-2 13.7.9 Records of Facility Description and Evaluation ............... 13.7-3 13.7.10 Personnel Records .............................................................. 13.7-3 APPENDIX 13A PLANT PERSONNEL TRAINING Revision 3, December 1995 13-ii
QUAD CITIES UFSAR TABLE OF CONTENTS (Continued) 13.0 CONDUCT OF OPERATIONS LIST OF TABLES Table 13.5-1 Responsibility for Preparation of Plant Procedures 13.7-1 Requirements for Record Retention Revision 4, April 1997 13-iii
QUAD CITIES UFSAR TABLE OF CONTENTS (Continued) 13.0 CONDUCT OF OPERATIONS LIST OF FIGURES Figure None.
Revision 4, April 1997 13-iv
QUAD CITIES UFSAR 13.0 CONDUCT OF OPERATIONS 13.1 ORGANIZATIONAL STRUCTURE 13.1.1 Corporate Management and Technical Support Organization The Exelon Generation Company (EGC) corporate organization and its functions and responsibilities are described in Chapter 1.0 of Quality Assurance (QA) Topical Report NO-AA-10,[1] with revisions on file with the Nuclear Regulatory Commission. [13.1-1]
13.1.1.1 Corporate Organizational Arrangement The corporate structure and the departments which provide technical support for operation are identified in QA Topical Report NO-AA-10. [13.1-2]
13.1.1.2 Operating Responsibilities Technical services and backup support for Quad Cities Station are provided throughout the life of the plant from departments within EGC as described in QA Topical Report NO-AA-10, and from groups outside the company through contractual agreements.
13.1.2 Plant Operating Organization The overall organization of Quad Cities Station is in accordance with Chapter 1.0 of QA Topical Report NO-AA-10.
13.1.2.1 Plant Personnel Responsibilities and Authorities The functions, responsibilities, and authorities of plant positions are described in QA Topical Report NO-AA-10.
13.1.2.2 Operating Shift Crews It is the intent of EGC and Quad Cities Station to provide sufficient staffing to maintain adequate shift coverage. Station management and technical support are either present or on call at all times. The onsite Technical Support Center and the onsite Operations Support Center are staffed during emergencies to provide added support. The Operating Department is under the direction of the Shift Operations Supervisor who reports to the Operations Director. The Shift Operations Supervisor works closely with the Radiation Protection, Chemistry, Work Management, and Maintenance Departments. [13.1-7]
The Shift Manager reports to the Shift Operations Supervisor and is responsible for directing and commanding the safe overall operation of the facility under all conditions. In addition, the Shift Manager is responsible for operating the plant in compliance with the station's operating license and the Quad Cities operating procedures. Shift Managers are licensed as Senior Reactor Operators (SROs) and have authority over the Unit Supervisor, Revision 11, October 2011 13.1-1
QUAD CITIES UFSAR Field Supervisor, Shift Technical Advisor, and the operators. He maintains an overview of plant operations. He is normally present in the control room or in the Shift Manager's office, and when he is not, he is within 10 minutes of the control room, and can be reached immediately. The Shift Manager acts as Emergency Plan Shift Emergency Director during an emergency, until relieved by a designated Station Emergency Director. The Shift Manager has the authority to delegate duties as necessary to the Unit Supervisors. [13.1-3]
Each operating staff normally consists of:
Position Number Shift Manager 1 Unit Supervisors 2 Field Supervisor 1 Shift Technical Advisor (STA) 1 Nuclear Station Operators 4 Non-licensed Operators 8 Fuel-Handling Supervisor (Required only 1 when moving fuel or performing core alterations)
The shift manning shall meet the requirements specified in 10 CFR 50.54(m)(2)(i). The shift staffing shall also meet the license requirements for fire brigade staffing and safe shutdown requirements.
Operating shifts are provided to ensure the safe operation of Quad Cities Station. The regular duties of each shift include operation and surveillance of all station equipment, including auxiliary systems, and proficient record keeping and operational housekeeping.
In addition, the operating shifts interface with Reactor Engineering for reactivity management. A licensed SRO is on duty in the control room whenever a unit is in MODE(s) 1, 2 or 3. Also, an STA, who possesses a technical degree and provides advisory technical support to the Shift Manager during abnormal operations, is always within 10 minutes of the control room. There is one licensed RO or SRO at the controls for each reactor that is not defueled. During periods of core alterations, a licensed SRO is present and directly supervises the core alterations. This SRO may have a limited SRO license.
[13.1-7a]
Revision 11, October 2011 13.1-2
QUAD CITIES UFSAR 13.1.3 Qualifications of Nuclear Plant Personnel 13.1.3.1 Qualification Requirements Qualification of the station management and operating staff meet minimum acceptable levels set forth in ANSI N18.1, Selection and Training of Nuclear Power Plant Personnel, dated March 8, 1971 (i.e., ANSI N18.1 - 1971), with the exceptions and clarifications as noted in Section 5 of the Technical Specifications.
A discussion of plant personnel responsibilities and qualifications at the time of and prior to startup is contained in Appendix 13A. This Appendix was put in the FSAR for historical purposes, at the request of the NRC.
Revision 11, October 2011 13.1-3
QUAD CITIES UFSAR 13.1.4 References
- 1. Exelon Nuclear Quality Assurance Topical Report NO-AA-10.
- 2. Deleted.
13.1-4 Revision 13, October 2015
QUAD CITIES UFSAR 13.2 TRAINING 13.2.1 Plant Training Programs The goal of training programs at Quad Cities Station is to assure that personnel have the skills and knowledge necessary to adequately perform the tasks to which they are assigned.
[13.2-1]
13.2.1.1 General Training Programs There are three types of training: [13.2-2]
- 1. Initial training, which provides indoctrination and training on safety and job skills commensurate with an individual's position;
- 2. Continuing training, which reinforces or increases knowledge and skills from initial training and on-the-job experience; and
- 3. Special or task-related training, which acquaints personnel with complex processes, procedures, or equipment not used on a routine basis.
Selected programs are further described in the following subsections.
13.2.1.1.1 General Employee Training General Employee training is administered to all personnel at Quad Cities Station.
Requalification training is administered with a frequency determined using processes derived from a systems approach to training (SAT) and in accordance with the requirements of 10 CFR 19. The course includes, but is not limited to, the following subject areas: [13.2-3]
A. Radiation protection, B. Appropriate emergency plans and procedures, C. Industrial safety, D. Location of assembly areas and security zones, E. Plant security, and F. Quality Assurance.
When necessary, training in the use of respiratory equipment is provided in conjunction with General Employee training.
13.2-1 Revision 14, October 2017
QUAD CITIES UFSAR 13.2.1.1.2 New Employee Orientation Training This program provides the new employee with a fundamental knowledge of company and station policies. It provides information above and beyond General Employee training in the following areas: [13.2-4]
A. Exelon Standardized Radiological Emergency Plan (E-Plan),
B. Selected station procedures, C. Industrial safety, D. Quality Assurance, E. Fire protection, F. Industrial relations, and G. Nuclear power plant orientation and plant familiarization.
Refresher training is provided via the Station Retraining Program, which is administered to all station employees with a frequency determined using processes derived from the SAT-based training process. It addresses the following topics: [13.2-5]
A. E-Plan, B. Selected station procedures (including out-of-service procedure),
C. Industrial safety (including hearing protection),
D. Quality Assurance, and E. Fire protection.
13.2.1.1.3 Exelon Standardized Radiological Emergency Plan Training Emergency Plan training ensures that all station personnel are trained as needed for the implementation of the E-Plan. [13.2-6]
Station personnel designated as emergency response personnel receive initial training and annual retraining in accordance with the Emergency Preparedness Training Matrix.
Training addresses applicable generic and site-specific portions of the E-Plan and corresponding implementing procedures. Additionally, participation in exercises and/or drills enhance skills which personnel are expected to use in the event of a nuclear emergency.
Station personnel not designated as emergency response personnel receive initial training and periodic retraining on the following topics:
A. Assembly areas, B. Emergency Response Facility assignment, 13.2-2 Revision 14, October 2017
QUAD CITIES UFSAR C. Potential hazards (radiological and nonradiological), and D. Anticipated actions including:
- 1. Assembly requirements (clothing, masks, self-contained breathing apparatus, etc.),
- 2. Emergency exposure limits,
- 3. Use of thyroid blocking agents, and
- 4. Accountability requirements.
13.2.1.1.4 Radwaste Shipments Training Training is provided to selected plant groups on the proper labeling, packaging, inspection, and shipping of radioactive waste. This training is required once every three years for affected employees to satisfy the requirements of NRC IE Bulletin 79-19 and DOT 49CFR172.704 recurrent training requirement. [13.2-7]
13.2.1.1.5 Deleted. [13.2-8]
13.2.1.2 Operations Department Training 13.2.1.2.1 Training Program for Nuclear Regulatory Commission License Applicants The training program for NRC license applicants complies with the requirements of ANSI N18.1-1971 and implements the training requirements of NUREG-0737. The objective of the program is to thoroughly familiarize Reactor Operator (RO) and Senior Reactor Operator (SRO) applicants with the theory and practices of facility operation. License applicants must meet the prerequisites of NUREG-1021 before entering the program. This program includes the following: [13.2-9]
Core subjects such as: [13.2-10]
- 1. Mathematics,
- 2. General science,
- 3. Nuclear physics,
- 4. Reactor theory, Revision 6, October 2001 13.2-3
QUAD CITIES UFSAR
- 5. Health physics,
- 6. Chemistry,
- 7. Heat transfer, and
- 8. Fluid flow, B. Description and tours of BWR systems, C. Procedure, FSAR and Technical Specification review, D. BWR simulator training, E. Plant, core, and operator performance, F. Examinations and evaluations, G. On-the-job-training with licensed operators, and H. Team building and diagnostics.
The Quad Cities Station training programs for RO and SRO received accreditation by the Institute of Nuclear Power Operations (INPO) in September of 1985. These programs were developed and maintained using the Systematic Approach to Training (SAT) methodology.
In accordance with the provisions of Generic Letter 87-07 as it applies to 10 CFR 55.59 (c),
CECo notified the NRC on January 22, 1990 of its intention to substitute the previously approved program with the SAT-based license requalification program. [13.2-11]
Retraining for licensed ROs, SROs, and SROs-Limited is conducted at intervals not exceeding 2 years. [13.2-12]
The requalification program includes training on revised Emergency Operating Procedures (EOP). For each revision to an EOP, the EOP Committee determines training requirements. Depending on the scope of the revision, training may consist of required reading, specific classroom training, comprehensive classroom training, simulator training, and/or plant walkdown. [13.2-13]
13.2.1.2.2 Non-licensed Operator Training Program Non-licensed Operator trainees participate in the training program applicable to training operators to perform job duties safely and in accordance with approved procedures. Much of this training is devoted to electrical systems, related procedures, electrical switching, and other information needed for the operator to perform required duties. Training is accomplished through classroom lectures, plant walk-throughs, and on-the-job training.
[13.2-14]
After completing initial training, trainees enter the retraining program. Training material is drawn from initial training lesson plans, modifications, and topics identified by Operations Department management.
Revision 6, October 2001 13.2-4
QUAD CITIES UFSAR Further, Non-licensed Operators may enter license operator training to obtain an NRC license.
13.2.1.2.3 Equipment Attendant Training Program Deleted. [13.2-15]
13.2.1.2.4 Fuel Handling Personnel Training Fuel Handling Supervisors have an NRC SRO-Limited license. Applicants for the position are given initial training which follows the guidelines of the training program for NRC license applicants. In addition, specific training related directly to fuel handling is provided. As a continuation of initial training, additional training is provided in accordance with the Station Licensed Personnel Requalification Program. [13.2-16]
The training program for the fuel handlers includes classroom lectures, plant walk-throughs, and on-the-job training.
13.2.1.2.5 Unit Supervisor Training The Unit Supervisor maintains a Senior Reactor Operators license. Applicants for the position are given initial training which follows the guidelines of the training program for NRC license applicants. As a continuation of initial training, retraining is provided in accordance with the Licensed Operator Personnel Requalification Program. If the Unit Supervisor also serves the STA function, then specific training related to accident assessment is provided. [13.2-17]
13.2.1.2.6 Supplemental Training As needed, Operations Department personnel receive training at offsite locations, from vendors, and through on-the-job training. [13.2-18]
13.2.1.2.7 Certified Fuel Handler Training and Retraining Program After certifications of permanent cessation of operations and of permanent removal of fuel from the reactor vessel are submitted in accordance with 10 CFR 50.82(a)(1 )(i) and (ii), the 10 CFR Part 50 licenses no longer authorize operation of the reactor or placement or retention of fuel in the reactor vessel. As a result, licensed reactor operators will no longer be required to support plant activities. Instead, Certified Fuel Handlers (CFHs) will be required to facilitate activities associated with decommissioning and irradiated fuel handling and management.
Revision 14, October 2017 13.2-5
QUAD CITIES UFSAR Section 10 CFR 50.2, "Definitions, requires that CFHs be qualified in accordance with an NRC-approved training program. The NRC approved CFH Training and Retraining Program will be used to satisfy training requirements for the plant personnel responsible for supervising and directing the monitoring, storage, handling, and cooling of irradiated nuclear fuel in a manner consistent with ensuring the health and safety of the public.
The NRC staff's review of the proposed CFH Training and Retraining Program determined that the program adequately addresses the safe conduct of decommissioning activities, the safe handling and storage of spent fuel, appropriate response to plant emergencies, and is consistent with the SAT processes defined by 10 CFR 55.4 and the requirements of 10 CFR 50.120(b)(2) and (b)(3). Based on their findings, the NRC staff approved the CFH Training and Retraining Program for QCNPS on 09/06/2016.
13.2.1.3 Maintenance Department Training Training is provided to mechanics within the Instrument, Mechanical, and Electrical Maintenance groups through a combination of: [13.2-19]
Revision 14, October 2017 13.2-5a
QUAD CITIES UFSAR A. On-the-job training, B. On-site training, C. Generic training classes (conducted at the Production Training Center (PTC)),
D. Maintenance Basic Systems Training, E. Continuing Training Classes, and F. Vendor Training Classes.
These programs combine to develop and promote craft capability. Specific training needs are identified by the maintenance supervisors.
On-the-job training is utilized as a fundamental means of instructing Maintenance Department personnel in the performance of their duties.
Maintenance Basic Systems Training is provided annually by the Training Department to promote Maintenance Department mechanics' understanding of overall plant operations and systems interactions. Continuing Training is also provided annually, covering selected topics from the initial training plus other pertinent topics.
Vendor training classes are conducted either onsite or offsite, as new equipment needs or new job needs arise.
Training programs conducted at the PTC are addressed in the following subsections for each discipline.
13.2.1.3.1 Instrument Maintenance Training Quad Cities Station instrument mechanics attend generic courses of instruction at the PTC.
These courses develop generic job-related skills using theory, knowledge, and practical shop exercises designed for the Instrument Maintenance group. Course topics include electronics, mathematics, transmitters, and control loops. [13.2-20]
13.2.1.3.2 Mechanical Maintenance Training Quad Cities mechanics attend generic courses of instruction. The purpose of these courses is to develop generic job-related skills using theory, knowledge, and practical shop exercises designed for Mechanical Maintenance groups. Course topics include theory, basic mechanical skills, use of machine shop tools, lubrication, and welding basics. [13.2-21]
13.2.1.3.3 Electrical Maintenance Training Quad Cities Station electricians attend generic courses of instruction. The purpose of these courses is to develop generic job-related skills using theory, knowledge, and shop Revision 6, October 2001 13.2-6
QUAD CITIES UFSAR exercises designed for Electrical Maintenance groups. Course topics include solid state components, troubleshooting techniques, switchgear maintenance, and motor repair.
[13.2-22]
13.2.1.4 Technical Services Training 13.2.1.4.1 Engineering Support Personnel Training The training for Engineering Support personnel is provided to personnel in the following departments: System Engineers, Regulatory Assurance, and Site Engineering. It is designed to produce personnel who will not only perform in their routine jobs, but who will also recognize and solve problems affecting station performance and efficiency. This program is supplemented as necessary by training classes scheduled at various offsite locations which accommodate the needs of various Engineering Support personnel. [13.2-23]
13.2.1.4.2 Qualified Nuclear Engineer Training Program Training for Qualified Nuclear Engineers consists of several weeks of classroom training during which they study reactor theory and application of that theory. In addition, they receive several months of on-the-job training. Continuing training is provided to keep Quad Cities Qualified Nuclear Engineers abreast of current industry issues.
13.2.1.4.3 Shift Technical Advisor/STA Training The Shift Technical Advisor shall have a bachelor's degree or equivalent in a scientific or engineering discipline. The Shift Technical Advisor shall also have specific training in plant design, and response and analysis of the plant for transients and accidents.
13.2.1.5 Radiation Protection Technician Training Radiation Protection Technician training develops comprehensive knowledge and practical skills associated with occupational radiation exposure in an operating nuclear power station. [13.2-24]
The Radiation Protection Technician training program consists of the following: [13.2-25]
A. Satisfactory completion of an academic program. Topics of these courses include:
- 1. Mathematics,
- 2. Nuclear physics,
- 3. Radioactive decay,
- 4. Basic chemistry, Revision 4, April 1997 13.2-7
QUAD CITIES UFSAR
- 5. Plant systems,
- 6. Radiation exposure,
- 7. Radiation shielding,
- 8. Biological effects of radiation exposure,
- 9. Radiation survey techniques,
- 10. Personnel monitoring, and
- 11. Emergency procedures.
B. On-the-job training under the supervision of a qualified Radiation Protection Technician.
Retraining is designed to reinforce and upgrade knowledge and skills obtained during initial training. Training needs are determined through a review of initial lesson plans, procedure revisions, installation of new station equipment, and other topical issues.
[13.2-26]
13.2.1.6 Chemistry Technician Training Chemistry Technician training develops comprehensive knowledge and practical skills associated with operational chemistry in an operating nuclear power station. [13.2-27]
The Chemistry Technician training program consists of the following: [13.2-28]
A. Satisfactory completion of an academic program. Topics of these courses include:
- 1. Mathematics,
- 2. Nuclear physics,
- 3. Radioactive decay,
- 4. Chemistry,
- 5. Sampling techniques,
- 6. Reactor coolant parameters,
- 7. Plant systems,
- 8. Basic radiation protection,
- 9. Laboratory safety, and
- 10. Emergency procedures.
B. On-the-job training under the supervision of a qualified Chemistry Technician.
Retraining is designed to reinforce and upgrade knowledge and skills obtained during Revision 4, April 1997 13.2-8
QUAD CITIES UFSAR initial training. Training needs are determined through a review of initial lesson plans, procedure revisions, installation of new station equipment, and other topical issues. [13.2-29]
13.2.1.7 Contractor Training The security force and other contractor personnel are given General Employee training and, when appropriate, respiratory training. [13.2-30]
13.2.1.8 Fire Brigade Training A training program for the Fire Brigade is maintained under the direction of the Station Fire Marshal. The program meets or exceeds the requirements of Section 27 of the NFPA Code-1975, except that training sessions are conducted quarterly. [13.2-31]
13.2.2 Replacement Training Retraining and replacement training of station personnel is maintained under the direction of the appropriate on-site manager. Training is in accordance with ANSI N18.1-1971 (Selection and Training of Nuclear Power Plant Personnel) and 10 CFR 55 for appropriate designated positions and includes familiarization with relevant industry operational experience. [13.2-32]
13.2.3 Applicable NRC Documents Following is a list of documents referenced in preparation of the Quad Cities training program.
A. 10 CFR 50, [13.2-33]
B. 10 CFR 55, [13.2-34]
C. 10 CFR 19, and D. 10 CFR 20.
Revision 6, October 2001 13.2-9
QUAD CITIES UFSAR 13.3 EMERGENCY PLANNING The Exelon Nuclear Standardized Radiological Emergency Plan (E-Plan) is a written emergency plan that establishes the concepts, evaluation and assessment criteria, and recommended protective actions necessary to limit and mitigate the consequences of potential or actual nuclear power plant emergencies. The E-Plan provides the necessary prearrangements, directions, and organization to ensure nuclear emergencies can be effectively and efficiently resolved in order to safeguard station personnel, property, and the general public. [13.3-1]
The E-Plan has been developed based on the emergency planning and preparedness requirements specified in Appendix E to 10 CFR Part 50 and Regulatory Guide 1.101, Revision 3 of August 1992. The E-Plan has been submitted to and approved by the NRC. It is reviewed annually, any changes or revisions that pertain to regulatory requirements are submitted to the NRC for approval.
The E-Plan includes site-specific Annexes which contain additional information and guidance that are unique to each nuclear generating facility. The site-specific Annexes are not independent of the E-Plan. Emergency Preparedness Procedures implement the E-Plan appropriately.
The E-Plan identifies onsite and offsite facilities and equipment available for emergency assessment, communications, first aid and medical care, and damage control. The Emergency Response Facilities (ERFs) consist of the: Control Room (CR), Technical Support Center (TSC), Operational Support Center (OSC), and Emergency Operations Facility (EOF).
The E-Plan provides for classification of emergencies into five categories (listed in order of increasing severity): Unusual Event, Alert, Site Emergency, General Emergency, and Recovery. Unusual Event classifications are events that are in progress or have occurred which indicate a potential degradation of the level of safety of the plant. No releases of radioactive material requiring offsite response or monitoring are expected unless further degradation of safety systems occurs. Alert classifications are events that are in progress or have occurred which involve an actual or potential substantial degradation of the level of safety of the plant. Any radioactive material releases are expected to be limited to small fractions of the Environmental Protective Agency (EPA) Protective Action Guideline exposure levels. Site Emergency classifications are events that are in progress or have occurred which involve actual or likely major failures of the plant functions needed for protection of the public. Any radioactive material releases are not expected to exceed EPA Protective Action Guideline exposure levels except near the site boundary. General Emergency classifications are events that are in progress or have occurred which involve actual or imminent substantial core degradation or melting with potential for loss of containment integrity. Releases can be reasonably expected to exceed EPA Protective Action Guideline exposure levels for more than the immediate site area. Recovery is that period when the emergency phase is over and actions are being taken to return the situation to a non-emergency state. The plant is under control and no potential for further degradation of the plant or the environment is believed to exist.
The E-Plan includes notification requirements for classified events, including prompt and accurate notifications to federal, state, and local governments.
Training is conducted for all emergency response personnel to ensure their proficiency. The training programs for emergency response personnel are based on the requirements of Appendix E to 10 CFR Part 50.
13.3-1 Revision 8, October 2005
QUAD CITIES UFSAR Evaluated exercises are conducted biennially at each nuclear station to demonstrate the adequacy of timing and content of E-Plan procedures and methods; to test emergency equipment and communication networks; and to ensure that emergency response personnel are familiar with their duties. Each exercise involves participation by federal, state, and/or local personnel as prescribed by regulatory requirements.
The E-Plan Manuals and Station Annexes are distributed on a controlled basis to all stations and emergency facilities requiring them, including appropriate federal, state, and local agencies.
The Technical Support Center (TSC) was designed to meet the requirements of NUREG-0737. The building and HVAC system were designed to meet the habitability requirements specified in the NUREG. The doses to the TSC personnel were calculated and shown to be within the specified guidelines using the assumptions of Reg Guide 1.3 and the dose conversion factors from Reg Guide 1.109. [13.3-2]
13.3-2 Revision 8, October 2005
QUAD CITIES UFSAR 13.4 REVIEW AND AUDIT Review and audit functions for Quad Cities Station are established in accordance with the EGC Quality Assurance Topical Report. [13.4-1]
Revision 6, October 2001 13.4-1
QUAD CITIES - UFSAR 13.5 PLANT PROCEDURES Day-to-day operations at Quad Cities are governed by procedure manuals within assigned areas of responsibility which specify employee actions and establish standards for plant operation.
A formalized system of written procedures which contains administrative and operating instructions in conformance with ANSI N18.7-1972, and which acknowledges the safety provisions of the facility license and Technical Specifications, is employed to ensure that all normal and reasonably foreseeable abnormal or emergency activities are conducted in a safe manner. [13.5-1]
13.5.1 Administrative Procedures Administrative procedures have been established to control various activities at Quad Cities Station. The requirements for procedure review and change are given in the Quality Assurance Topical Report NO-AA-10. The procedures call for suspension of any potentially unsafe operation and investigation by the Station Management of any incident resulting in such an operation. Appropriate authorities will be notified and, if necessary, procedures will be changed or new ones established to prevent a recurrence of the incident or similar incidents. The use of company wide procedures (e.g.) General Procedures, Nuclear Station Work Procedures (NSWPs), Special Processes Procedure Manual (SPPM), and Nuclear Engineering Procedures (NEPs) is administratively controlled within the body of those procedures, as described in Quad Cities administrative procedures or in individual work packages. These procedures govern interactions between the station and other organizations in the company or standardize procedures at all sites. [13.5-2]
Administrative procedures have been developed and implemented to limit the working hours of unit staff who perform safety-related functions; e.g., senior reactor operators, reactor operators, health physicists, auxiliary operators, and key maintenance personnel.
13.5.1.1 Conformance with Federal Guidelines Quad Cities plant procedures are written to conform to applicable federal guidelines. The contents of the procedure manuals follow Regulatory Guide 1.33 and ANSI N18.7-1972 requirements. [13.5-3]
13.5.1.2 Preparation of Procedures Quad Cities station procedures are prepared by members of the station management organization. The responsibility for writing and preparing plant procedures is assigned to the appropriate department heads of the station administrative organization as indicated in Table 13.5-1. [13.5-4]
Detailed station procedures (i.e., plant procedures), administrative procedures, and safety-related operating procedures are prepared by members of the station management staff, or their designee. The Technical Specifications provide a list of items for which written procedures are required to be prepared, approved, and implemented. Planned safety-related operations are conducted in accordance with these detailed station procedures. Company wide procedures are under the control of various corporate organizations.
The station Onsite Review Committee reviews all appropriate station procedures as required by the Technical Specifications. [13.5-5]
13.5-1 Revision 8, October 2005
QUAD CITIES - UFSAR Review and approval of procedures and procedure changes for operation, fuel handling, maintenance, and plant inspection for Quad Cities Station are carried out per the requirements of the Technical Specification. [13.5-6]
All station procedures described in this section are authorized by appropriate station management personnel before being implemented.
13.5.1.3 Procedures Quad Cities administrative procedures are written and implemented to describe the station organization, establish station policy and programs, provide station organization responsibilities, supplement the requirements of the Quality Assurance Topical Report, implement the requirement of the Technical Specifications, and supplement the total job management program. The descriptions of station positions, their responsibilities and qualification requirements are given in Section 13.1 of the UFSAR. A brief description of the various station procedures, which control specific tasks, are provided in the following subsections: [13.5-7]
13.5.1.3.1 Shift Orders Shift Orders: [13.5-8]
A. Are used to provide written communication to the shift crews; B. Are issued by the Shift Operations Supervisor or Operating Engineers; C. Are used to convey administrative requirements, special operating evolutions, and surveillances; D. Are not used to replace permanent procedures; E. Are valid until the time noted in the order or until the order is withdrawn; F. Are reviewed periodically for continued applicability by the Shift Operations Supervisor; G. Are read by the Shift Managers, Unit Supervisors, Shift Supervisor/Field Supervisors, and Work Execution Center personnel.
13.5.1.3.2 Equipment Control Equipment control procedures are established to provide for the necessary control of equipment, to maintain plant equipment and personnel safety, and to avoid unauthorized operation of equipment. These instructions utilize the control measure of tagging to secure and identify equipment in a controlled status. Independent verification is employed to ensure that tagging has been implemented correctly. [13.5-9]
13.5-2 Revision 8, October 2005
QUAD CITIES - UFSAR The use of equipment locks is employed to ensure that the safety of plant equipment and personnel is not jeopardized. Verification and control procedures, NSWPs, SPPM, and the NEPs are utilized when equipment locking is necessary.
13.5.1.3.3 Control of Maintenance and Modifications Control of maintenance and modifications is provided for in the Quality Assurance Topical Report. Company wide procedures (e.g.) Station Administrative Procedures, NSWPs, SPPM, NSPs, and NEPs have also been developed to control plant maintenance and modification activities. [13.5-10]
13.5.1.3.4 Master Surveillance Testing Schedule A master surveillance testing schedule is prepared which prescribes the surveillance to be performed, the frequency as outlined in the Technical Specifications and the assigned department. A computerized system for tracking of surveillance tasks has also been developed to augment the existing system. [13.5-11]
13.5.1.3.5 Logbook Usage and Control Procedures for logbook usage and control are provided to ensure adequate documentation of various unit operations and conditions. [13.5-12]
13.5.1.3.6 Interim Procedures Interim procedures may be issued to direct specific actions during testing and maintenance, provide guidance in unusual situations not within the scope of the station operating procedures, and ensure orderly and uniform operations for short periods when the plant, a system, or a component is in such a condition that portions of existing procedures do not apply.
[13.5-13]
Interim procedures require review and approval according to the station review process and must be authorized by the appropriate management representatives prior to implementation.
13.5.2 Operating and Maintenance Procedures The various operating and maintenance procedures that have been developed for the Quad Cities Station are described in the following subsections:
13.5-3 Revision 8, October 2005
QUAD CITIES - UFSAR 13.5.2.1 Operating Procedures The procedures described in this section are performed primarily by or with the knowledge of or reflect the actions of licensed operators. [13.5-14]
13.5.2.1.1 System Operating Procedures The system operating procedures cover startup related systems requirements, operation, and shutdown of each auxiliary system or subsystem. Check-off lists, step sign-offs, section sign-offs, and/or attachments where appropriate are included for systems procedures. [13.5-15]
13.5.2.1.2 General Operating Procedures The general operating procedures cover reactor-turbine-generator normal start up operation, normal shutdown, scram recovery, and hot standby. Each procedure consists of a step-by-step sequence of instructions for the particular operation involved. In addition, the conditions of the systems and equipment prior to the initiation of the procedure are specified, and precautions governing the particular operation are described. [13.5-16]
Check-off lists are included for complex operations. These lists delineate in detail the steps an operator must follow in order to complete an operation. As each step is completed, the operator records its completion on the check-off list. When the procedure has been completed, the operator signs and dates the check-off list and has it approved by the shift engineer. The procedure is then filed per the retention schedule.
13.5.2.1.3 Abnormal Operating Procedures This procedure category is composed of two subcategories: General Abnormal Operating procedures, which are based upon plant symptoms, and Operating Abnormal Procedures, which are based upon system and subsystem conditions.
13.5.2.1.3.1 General Plant Abnormal Procedures These procedures are site specific implementation of the BWR Owners Group's emergency procedure guidelines. They are symptoms based procedures that direct operator action to control a wide range of critical plant parameters regardless of the initial transient. [13.5-17]
13.5.2.1.3.2 Operating Abnormal Procedures These procedures give appropriate operator response to anticipated alarms and off-normal operating conditions. [13.5-18]
Revision 4, April 1997 13.5-4
QUAD CITIES - UFSAR 13.5.2.1.4 Annunciator Response Procedures Annunciator procedures are written and implemented for the purpose of detailing setpoints, automatic actions, and operator actions necessary for response to a condition annunciated at an alarm panel. Where the alarm is indicative of an off-normal or emergency condition, annunciator procedures reference the appropriate procedure. [13.5-19]
13.5.2.2 Other Procedures This section describes how other operating and maintenance procedures are classified, what group within the operating organization has responsibility for following each class of procedure, and the general objectives and character of each class of procedure.
13.5.2.2.1 Plant Radiation Protection Procedures The station Radiation Protection Procedures have been established to provide necessary control over radiation exposure to personnel at the Quad Cities Station. [13.5-20]
13.5.2.2.2 Emergency Preparedness Procedures The Quad Cities Emergency Preparedness Procedures describe actions needed for handling station emergencies as described in the Emergency Plan. [13.5-21]
13.5.2.2.3 Instrumentation Procedures The instrumentation procedures govern the checkout, operation and calibration of plant instrumentation, including nuclear process and radiation monitoring instrumentation. Check-off lists, step sign-offs, section sign-offs, and/or attachments are provided for activities that are complex or that require documentation. Procedures are provided for the following activities:
[13.5-22]
A. Care and control of calibration standards and test equipment, including related records; B. Initiation of instrument repair work, including notifications and authorizations required; C. Surveillance testing, including schedule, listing of requirements, prerequisites, calibration and test instruments to be used, limits, use of forms for records, and reporting; D. Calibration and functional test procedures and use of vendor manuals for reference or detailed procedures.
The instrument maintenance department prepares and follows these procedures. [13.5-23]
13.5-5 Revision 8, October 2005
QUAD CITIES - UFSAR 13.5.2.2.4 Chemical Control Procedures Chemical Control Procedures state the operating limits for plant chemical and radiochemical control and indicate the actions required if these limits are exceeded. A schedule is included which describes the frequency and location of samples to be taken and type of analysis or other routine to be performed. Report sheets are provided for documentation of samples taken, analysis results, and other routines performed. Requirements for notification of personnel or departmental supervisors are indicated. Step-wise analytical and calibration procedures are identified in these procedures. [13.5-24]
13.5.2.2.5 Radioactive Waste Management Procedures Radioactive Waste Management Procedures prescribe the methods and modes of operation employed to collect, treat, store, and dispose of liquid and solid radioactive waste materials resulting from plant operations. [13.5-25]
13.5.2.2.6 Maintenance Procedures The maintenance procedures prescribe the technique, tools and equipment to be used to perform inspection, repair and overhaul of unit major equipment.
Maintenance which can affect the performance of safety-related and nonsafety-related equipment is properly preplanned according to written procedures, is in accordance with documented instructions, procedures, or drawings suitable to the circumstances, and conforms to applicable codes, standards, specifications, and criteria. Reference may be made to appropriate sections of related vendor manuals, instructions, or approved drawings to provide adequate instructions to assure the required quality of work. Maintenance Procedures identify codes, standards, material specifications, and inspection requirements where applicable. Special process procedures are included as required by the code. [13.5-26]
13.5.2.2.7 Material Control Procedures Material control requirements are identified in Section 8.0 of the Quality Assurance Topical Report. Quad Cities Station has developed procedures for the identification and control of materials, parts and components for use in the station. [13.5-27]
13.5.2.2.8 Plant Security Procedures The plant security is addressed in the security section of this UFSAR (Section 13.6).
Procedures have been developed for Quad Cities Station to provide methods to perform actions associated with plant security. [13.5-28]
13.5-6 Revision 8, October 2005
QUAD CITIES - UFSAR 13.5.2.2.9 Surveillance Procedures The surveillance procedures prescribe the procedure by which major components and systems are periodically inspected and tested by the Operations and Maintenance Departments.
Surveillance Procedures describe the operations for accomplishment of required surveillance tests to be conducted as required by Technical Specifications. Check-off lists, step sign-offs, section sign-offs, and/or attachments are provided where complex operations are involved and documentation is required. The surveillance procedures also include surveillance of equipment that are not required by the Technical Specifications or instrumentation procedures. [13.5-29]
It is the responsibility of the appropriate department to prepare and implement the surveillance procedures. [13.5-30]
13.5.2.2.10 Systems Engineering Procedures The systems engineering procedures, NEPs, and NSWPs describe the method used to perform engineering routine duties. [13.5-31]
13.5.2.2.11 Systems Engineering Surveillances The systems engineering surveillances outline the method used to perform periodic tests and inspections conducted by the System Engineers. [13.5-32]
13.5.2.2.12 Valve Checklists Valve checklists provide a means for operations to ensure proper valve line-ups. [13.5-33]
13.5.2.2.13 Fuel Handling Procedures Fuel Handling Procedures section gives methods used by fuel handlers to perform jobs such as core loading, core unloading, fuel receipt, etc. and provide direction for interfacing with operations. [13.5-34]
13.5.2.2.14 Document Maintenance Procedures Document Maintenance Procedures provide a description of the station record retention and retrieval system. [13.5-35]
Revision 4, April 1997 13.5-7
QUAD CITIES - UFSAR 13.5.2.2.15 Appendix R Safe Shutdown Procedures Safe shutdown Appendix R procedures are written and implemented for the purpose of providing guidelines for bringing the reactor to a cold shutdown condition with a minimum number of components during severe fire conditions. [13.5-36]
13.5.2.2.16 Foreign Material Exclusion and Evaluation Procedures Foreign Materials Exclusion (FME) and Evaluation Procedures provide the necessary requirements to prevent and control introduction of foreign materials into structures, systems, and components. They also provide for notifications and actions when FME integrity is lost or unexpected foreign material is discovered. Guidance is provided for evaluating the impact on systems and reactor fuel when specific foreign materials are suspect in specific plant systems.
13.5-8 Revision 8, October 2005
QUAD CITIES - UFSAR Table 13.5-1 RESPONSIBILITY FOR PREPARATION OF PLANT PROCEDURES Procedure Group Responsible Department Heads Administrative procedures Cognizant Department Head Operating/Surveillance procedures Operations Support Manager Technical/Surveillance procedures Systems Engineering Manager Mechanical Maintenance/Surveillance Master Mechanical Mechanic procedures Electrical Maintenance/Surveillance Master Electrical Mechanic procedures Instrumentation/Surveillance procedures Master Instrument Mechanic Radiation Protection procedures Health Physics Supervisor Chemical Control procedures Chemistry Manager Emergency procedures EOP Coordinator (Sheet 1 of 1)
Revision 6, October 2001
QUAD CITIES UFSAR 13.6 SECURITY Quad Cities Station implements and maintains in effect all provisions of the NRC-approved physical security, guard training and qualification, and safeguards contingency plans for Quad Cities Station in accordance with the operating licenses. The plans are specified in the following documents, as revised and filed with the NRC: [13.6-1]
A. Quad Cities Nuclear Power Station Security Plan, B. Quad Cities Nuclear Power Station Security Personnel Training and Qualification Plan, and C. Quad Cities Nuclear Power Station Safeguards Contingency Plan.
These plans meet the requirements of 10 CFR 73.55, Appendices B and C to 10 CFR 73, and ANSI N18.17 - 1973.
Procedures to implement the Quad Cities Station Security Plan were developed to establish administrative requirements and responsibilities for the plant security program and to supplement features and physical barriers designed to control access to the plant and, as appropriate, to vital areas within the plant. These procedures were written and remain under the cognizance of the Manager, Nuclear Security and the procedures that contain Safeguards Information shall be withheld from public disclosure.
The Security Plan documents Safeguards Information protected under 10 CFR 73.21 and are, therefore, withheld from public disclosure.
The following is a general outline of the security program.
A. The basic protective equipment and measures used are as follows:
- 1. The main entrance gate to the owner-controlled area of the plant may be closed during weekends and backshift hours. Voice identification may be used to gain access to the owner-controlled area. [13.6-2]
- 2. The gatehouse and main gate to the protected area of the plant are staffed by a security force on a 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> basis.
- 3. Multiple layers of protection, including isolation zones, protected area barriers, intrusion detection systems, vital area barriers with alarms, and security force patrols have been established to provide protection to vital equipment in the station.
- 4. Monitoring of protected and vital areas is accomplished by electronic sensors, closed circuit TV, and by members of the security force.
- 5. All plant buildings, the cooling water intake, and the 310-foot chimney are located within protected area barriers.
13.6-1 Revision 10, October 2009
QUAD CITIES UFSAR
- 6. An armed security force has been established to control access into the protected and vital areas of the plant, and to respond to security contingencies.
- 7. All personnel granted unescorted access to the plant are directed to verbally challenge an unauthorized person encountered inside the protected area.
B. The procedures used to admit and monitor normal visits to the site and plant are as follows:
- 1. General public The general public, either individuals or groups, is admitted to the plant only through prior arrangements. All members of the general public must provide proper identification and submit to standard search procedures prior to entry into the protected area. Visitors are taken only to specific areas in the service building and plant by preassigned tour guides. A guide remains with the visitors continually, verifies that all visitors stay in their proper groups, and returns the groups to the main gate.
- 2. Nonplant utility personnel Utility personnel that are not part of the plant staff are authorized for unescorted access by cognizant station personnel.
- 3. Other personnel Contractors, and other service personnel authorized to perform onsite activities without escort, are required to be screened for unescorted access to the plant prior to being issued a photo identification badge. Status assignments of photo identification badge key cards limit access to only areas in which the individual has a need to be due to work requirements.
C. The following provisions reduce the vulnerability of critical equipment necessary for safe operation to acts of industrial sabotage:
- 1. Through station security plan commitments, all vital area doors are locked, have alarms or are guarded. Only screened and cleared individuals with the proper status are granted vital area access through these doors by utilizing a photo identification key card.
- 2. Patrols by members of the security force and scheduled rounds by operators are conducted within vital areas of the plant on a regular basis.
- 3. Certain valves on safety-related systems are chain locked.
Revision 10, October 2009 13.6-2
QUAD CITIES UFSAR 13.7 RECORDS Records are retained to furnish evidence of activities affecting quality. These records are stored from the time of their creation or receipt until their ultimate disposal in a manner which meets the requirements of applicable standards, codes, and regulatory agencies with regard to maintenance, preservation, and protection of files. [13.7-1]
Table 13.7-1 lists types of records retained for Quad Cities Station. It also describes specific records within each type and specifies the minimum required retention period. Record types are briefly discussed in the following subsections.
13.7.1 Control Room Records Control room records are divided into subgroups. The reactor related records pertain to the reactor vessel or the reactor core. The steam plant records provide information related to the steam turbine and its auxiliary systems. The electrical plant records pertain to the emergency diesel generator. [13.7-2]
The information is recorded automatically by control room recorders. The Shift Engineer is responsible for control room record keeping.
The retention period for these records is specified on Record Retention Schedule forms for each record. These record retention schedules are set according to guidelines established by NRC orders, Federal Power Commission regulations, and Illinois Commerce Commission regulations.
13.7.2 Computer Records Computer records provide documentation of alarms associated with plant process variables, sequences of plant events, and calculations related to plant operations and performance.
The information provided by the process computer is recorded in several ways. Alarms associated with plant process variables are displayed on output devices and retained in computer files as they occur. Chronological order of plant operating events are displayed on output devices and retained in computer files as the events take place. Information including averages of plant variables, totals of plant variables, and calculations related to various phases of plant operation and performance, are displayed on output devices and retained in computer files for particular time intervals at the end of the day. Some information is recorded on recorders.
The Shift Engineer is responsible for assuring that the process computer and associated equipment are functional to enable computer record keeping. [13.7-3]
Revision 7, January 2003 13.7-1
QUAD CITIES UFSAR 13.7.3 Logs Written logs are maintained by designated station personnel to record specific information and activities. Check off lists of complex systems are also maintained. The information recorded includes the status of unit equipment, malfunctions, scrams, changes in operating conditions, tests and measurements performed by the operators, daily operating orders to the shift engineer, fuel handling transactions, R-key usages, and computer program changes. The Shift Engineer is responsible for these records. [13.7-4]
13.7.4 Plant Operations Records Plant operations records provide pertinent information on the history of unit power production, operational excursions, and related quality activities. For example, records of normal plant operation include notation of power levels and periods of operation at each power level. [13.7-5]
13.7.5 Review Committee Transactions These records include minutes of meetings and results of reviews and audits performed by the Offsite and Onsite Review Committees. [13.7-6]
13.7.6 Reports Reports document descriptions, results, conclusions, and comments regarding tests and inspections carried out in conjunction with plant operations and performance. Other reports are written at regular intervals to summarize plant operation and performance.
Reports are written under the supervision of the Systems Engineering Manager. [13.7-7]
13.7.7 Radiological and Chemical Records Included in this category of records is the current occupational radiation exposure for all plant personnel, including contractors and plant visitors, in accordance with 10 CFR 20, as well as radiation surveys, meteorological reports, reports of environs monitoring, and others as noted in Table 13.7-1. [13.7-8]
The Radiation Protection Technical Supervisor and Chemistry Manager are responsible for keeping all radiological and chemical records, respectively.
13.7.8 Maintenance Records This category includes records of maintenance and activities (substitution, inspection, repair) for principal equipment pertaining to nuclear safety, and the reasons for the maintenance. It also includes records of periodic checks, inspections, calibrations, and/or Revision 6, October 2001 13.7-2
QUAD CITIES UFSAR corrective actions (if any) performed in accordance with Technical Specification surveillance requirements. [13.7-9]
These records are the responsibility of the Site Maintenance Director.
13.7.9 Records of Facility Description and Evaluation This set of records includes drawings, descriptions of plant changes, evaluations performed in accordance with 10 CFR 50.59, and records of Environmental Qualification. [13.7-10]
13.7.10 Personnel Records These records address the qualification, experience, and training of individual staff members. It will include medical and company history information. [13.7-11]
Revision 6, October 2001 13.7-3
QUAD CITIES UFSAR Table 13.7-1 REQUIREMENTS FOR RECORD RETENTION Minimum Record Type Record Description Retention Period Control room records Reactor related recorder data Life of plant
[13.7-12]
Steam plant recorder data Life of plant Electrical Plant recorder data Life of plant Computer records [13.7-13] Alarm/Trend typer sheets 6 months Demand typer sheets 6 months Periodic log sheets Life of plant Trend recorder charts Life of plant Logs [13.7-14,. 13.7-15] Shift Manager's log Life of plant Reactor Operators' log Life of plant Control Room log Life of plant Radwaste log 5 years Make up demineralizer log 5 years Fuel handling log 5 years R key log 1 year Plant operations records Normal Plant Operation 5 years
[13.7-16, 13.7-17]
Reportable events 5 years Safety limit occurrences 5 years Reactor coolant system in- Life of plant service inspection [13.7-18]
Transient or operational Life of plant cycling of life limited components [13.47-19]
(Sheet 1 of 4)
Revision 7, January 2003
QUAD CITIES UFSAR Table 13.7-1 REQUIREMENTS FOR RECORD RETENTION Minimum Record Type Record Description Retention Period Physic tests and tests 5 years pertaining to nuclear safety
[13.7-20]
Changes to operating 5 years procedures [13.7-21]
Review committee Reviews by Offsite Review Life of plant Transactions [13.7-22] Committee Reviews by Onsite Review Life of plant Committee Reports [13.7-23] Monthly performance reports Life of plant Reports to the NRC Life of plant Reports of special tests Life of plant Radiological and chemical Personnel exposure records Life of plant records [13.7-24]
Releases to atmosphere from Life of plant chimney [13.7-25]
Liquid discharges to discharge Life of plant flume and blowdown Meteorological reports Life of plant
[13.7-26]
Environs monitoring report Life of plant
[13.7-27]
Station radiation surveys Life of plant
[13.7-28]
Radioactive material shipping Life of plant and receiving [13.7-29]
Source smear surveys [13.7-30] Life of plant Chemical analyses Life of plant Byproduct material inventory 5 years
[13.7-31]
(Sheet 2 of 4)
QUAD CITIES UFSAR Table 13.7-1 REQUIREMENTS FOR RECORD RETENTION Source leak test results 5 years New and spent fuel inventory Life of plant
[13.7-32]
New and spent fuel assembly Life of plant histories Maintenance records Substitutions Life of plant
[13.7-33]
Replacements Life of plant Repairs [13.7-34] Life of plant Lubrication [13.7-35] Life of plant Instrument calibration 5 years Implementation of Technical 5 years Specification surveillance requirements [13.7-36]
Maintenance of principal 5 years equipment pertaining to nuclear safety [13.7-37]
Records of facility Evaluations per 10 CFR 50.59 5 years description and pertaining to tests and evaluation [13.7-38] experiments Changes to the plant (i.e., Life of plant equipment changes) as it is described in the SAR including associated Evaluations per 10 CFR 50.59 [13.7-39]
Drawings (updated, corrected, Life of plant and as-built) [13.7-40]
Environmental Qualification Life of plant
[13.7-40]
Personnel records Personnel qualifications, Life of plant training, retraining, and experience [13.7-42]
(Sheet 3 of 4)
Revision 6, October 2001
QUAD CITIES UFSAR Table 13.7-1 REQUIREMENTS FOR RECORD RETENTION Minimum Record Type Record Description Retention Period Personnel status with respect Life of plant to Reactor Operator's licenses
[13.7-43]
Company history While on site (Sheet 4 of 4)
QUAD CITIES FSAR APPENDIX 13A - TABLE OF CONTENTS Page No 13A.1 INTRODUCTION 13A.1-1 13A.2 PREOPERATIONAL TRAINING 13A.2-1 13A.2.1 Fundamental Courses/or Equivalent Experience 13A.2-1 13A.2.2 Boiling Water Reactor Technology Course 13A.2-1 13A.2.3 Equipment Description Course 13A.2-1 13A.2.4 Operating Procedures Course 13A.2-1 13A.2.5 Simulator Training Course 13A.2-2 13A.2.6 Dresden 13A.2-2 13A.2.7 Quad Cities Units 1 and 2 On-Site Training 13A.2-2 13A.3 OPERATIONAL TRAINING 13A.3-1 13A.4 EMERGENCY DRILLS 13A.4-1 13A.5 PERSONNEL 13A.5-1 13A.5.1 Responsibilities 13A.5-1 13A.5.1.1 Administration Position Descriptions 13A.5-1 13A.5.1.2 Technical Staff Positions Descriptions 13A.5-3 13A.5.1.3 Fuel Handling 13A.5-4 13A.5.1.4 Training Supervisor 13A.5-4 13A.5.2 Commonwealth Edison - General Electric Administrative 13A.5-5 Relationships 13A.5.3 Qualifications 13A.5-5 13A.5.3.1 Shift Personnel Qualifications (Operations) 13A.5-6 13A.5.3.1.1 Shift Foreman 13A.5-6 13A.5.3.1.2 Nuclear Station Operators 13A.5-6 13A.5.3.1.3 Equipment Operator 13A.5-6 13A.5.3.1.4 Equipment Attendant 13A.5-7 13A.5.3.1.5 Radiation Protection Man 13A.5-7 13A.5.3.2 General Electric Personnel Qualifications 13A.5-7 13A.5.3.2.1 Lead Test Design and Analysis Engineer 13A.5-7 13A.5.3.2.1.1 Qualification Requirements 13A.5-7 13A.5.3.2.1.1.1 Formal Education 13A.5-7 13A.5.3.2.1.1.2 Experience 13A.5-7 13A-I
QUAD CITIES FSAR APPENDIX 13A - TABLE OF CONTENTS Page No 13A.5.3.2.2 Test Design and Analysis Engineer I & II 13A.5-8 13A.5.3.2.2.1 Qualification Requirements 13A.5-8 13A.5.3.2.2.1.1 Formal Education - (I & II) 13A.5-8 13A.5.3.2.2.1.2 Experience - (TD&A ENGR I) 13A.5-8 13A.5.3.2.2.1.3 Experience (TD&A ENGR II) 13A.5-8 13A.5.3.2.3 Automatic Control Systems Engineer 13A.5-9 13A.5.3.2.3.1 Qualifications 13A.5-9 13A.5.3.2.3.1.1 Formal Education 13A.5-9 13A.5.3.2.3.1.2 Experience 13A.5-9 13A.5.4 Start-Up Personnel Résumés 13A.5-9 13A.5.4.1 General Electric Résumés 13A.5-9 13A.5.4.2 Commonwealth Edison Résumés 13A.5-42 13A-ii
QUAD CITIES FSAR APPENDIX 13A - List of Tables Table 13A.2-1 Quad Cities Unit 1 Personnel Training 13A-iii
QUAD CITIES FSAR APPENDIX 13A - List of Figures Figure 13A.5-1 Startup Organization and Interrelationships 13A-iv
QUAD CITIES FSAR APPENDIX 13A 13A.1 INTRODUCTION This appendix discusses training, the plant organization, and plant personnel at the time of and prior to startup. The material in this section was written at different times during the preoperational period, which is why the discussions are written in the present and future verbal tenses. All of the training was completed as described. This appendix was put in the FSAR for historical purposes at the request of the NRC.
13A.1-1
QUAD CITIES FSAR 13A.2 PREOPERATIONAL TRAINING The preoperational training has been given for personnel as indicated in Table 13A.2-1.
13A.2.1 Fundamental Courses / or Equivalent Experience Power Plant Steam and Mechanical Fundamentals Power Plant Electrical Fundamentals Introduction to Nuclear Power Radiation Protection Math Review These courses were offered to new operators and those who have had these courses.
13A.2.2 Boiling Water Reactor Technology Course The boiling water reactor technology program is a four-week course for technical personnel given by GE design engineers.
13A.2.3 Equipment Description Course The equipment description course will be for all personnel and given in a classroom discussion type training. The training material will be adjusted for various groups relating to their interests such as fuel department, maintenance, etc.
13A.2.4 Operating Procedures Course The operating procedures course, for all operating personnel, will consist of classroom lectures and training on the simulator and on the job.
13A.2-1
QUAD CITIES FSAR 13A.2.5 Simulator Training Course The simulator training course, for selected operating people, will consist of a 12-week period at the GE Nuclear Power Plant Training Center. This course includes lectures, tests and over 100 hours0.00116 days <br />0.0278 hours <br />1.653439e-4 weeks <br />3.805e-5 months <br /> of simulator operation.
13A.2.6 Dresden On-the-job training and experience on Dresden Unit 1 has been proceeding since startup in 1959 and is continuing.
13A.2.7 Quad Cities Units 1 and 2 On-Site Training This part of the program will take place during the equipment description course, preoperational testing and startup of Units 1 and 2.
13A.2-2
QUAD CITIES FSAR TABLE 13A.2-1 QUAD CITIES UNIT 1 PERSONNEL TRAINING No of ACTIVITY TITLE People F BWRT ED OP ST OJ OS PLANT SUPERINTENDENT 1 X X X X ASSISTANT SUPERINTENDENT 1 X X X X X X OPERATING ENGINEER 2 X X X X X X SHIFT ENGINEER AND TRAINING SUPERVISOR 6 X X X X X X X STARTUP AND SHIFT FOREMEN 10 X X X X X X X NUCLEAR STATION OPERATOR 15 X X X X X X EQUIPMENT OPERATOR 5 X X X X X X EQUIPMENT ATTENDANT 10 X X X X X TECHNICAL STAFF SUPERVISOR 1 X X X X X NUCLEAR ENGINEER 1 X X X X THERMAL ENGINEER 1 X X X X ASSISTANT THERMAL ENGINEER 1 X X X INSTRUMENTATION ENGINEER 1 X X X X X RADIATION CHEMISTRY SUPERVISOR 1 X X X X MAINTENANCE ENGINEER AND MASTER MECHANIC 2 X X X X MAINTENANCE FOREMAN 3 X X X X FUEL FOREMAN 2 X X X X X OTHER PLANT PERSONNEL X X X X F - Fundamental Courses; BWRT - Boiling Water Reactor Technology Course; ED - Equipment Description Course; OP - Operating Procedure Course; ST - Simulator Training; OJ - On the Job BWR Training; OS - On-Site Training
QUAD CITIES FSAR 13A.3 OPERATIONAL TRAINING Commonwealth has continuing responsibility to provide sufficiently qualified personnel to assure safe and efficient operation of the separate units and the entire Station.
Normally, a vacancy in any grade will be filled by the candidate next in line who qualifies technically and demonstrates satisfactory performance on the job. This philosophy of personnel replacement creates incentive for personnel in lower job classifications to expand their ability to perform work in higher classifications. Personnel in higher job classifications have a continuing responsibility to train men in the lower classifications.
The Operating Engineers, Shift Engineers, Shift Foremen, Technical Staff Supervisor, Training Supervisor and Maintenance Engineer have overall responsibility for the training and maintenance of proficiency of the personnel in their respective groups. This training and maintenance of proficiency will be accomplished by lectures, demonstrations and drills and on-the-job training by supervisors and foremen of the various shifts or other working groups. A rotating work schedule has been established under which each shift will normally be relieved of operating responsibilities on specified days and will devote part of this time to Unit 1 and 2 training.
13A.3-1
QUAD CITIES FSAR 13A.4 EMERGENCY DRILLS Commonwealth Edison Company has a Generating Station Emergency Plan (GSEP) which is part of the Stations Abnormal and Emergency Procedures. Quad Cities Station will prepare emergency procedures to implement the GSEP. This plan is filed under Dresden 2/3, Dockets 50-237 and 50-249, Amendment 12/13.
13A.4-1
QUAD CITIES FSAR 13A.5 PERSONNEL 13A.5.1 Responsibilities 13A.5.1.1 Administration Position Descriptions The Station Superintendent has the full responsibility for the operation of the station.
The Superintendents function is primarily administrative and managerial. If the Station Superintendent is unavailable or becomes incapacitated, the Assistant Superintendent assumes the Superintendents responsibilities. The Station Superintendent is Chairman of the Station Review Board.
The Assistant Superintendent directs and is responsible for the activities of the electrical and mechanical maintenance, operating and technical groups at the station. The Assistant Superintendent will be licensed as Senior Reactor Operator. The Station Superintendent sometimes assumes the responsibilities of the Assistant Superintendent when he is unavailable. The Assistant Superintendent may delegate his responsibilities to one of the Operating Engineers. The Assistant Superintendent is a member of the Station Review Board.
The Operating Engineers are responsible for the operating, training, and instrument maintenance activities at the station. They will be licensed as Senior Reactor Operators.
The Operating Engineers are responsible for the scheduling of the operators and compliance with all aspects of the Technical Specifications.
When both Operating Engineers are available, one man is assigned to be responsible for carrying out the job duties.
When one Operating Engineer is unavailable, the other assumes his responsibilities. If both Operating Engineers are unavailable, the Assistant Superintendent takes over. The Operating Engineers are members of the Station Review Board.
13A.5-1
QUAD CITIES FSAR The Shift Engineers are responsible for the plant operation within operating limits and the Technical Specifications while they are on shift. The Shift Engineers will be licensed as Senior Reactor Operators. The duties and responsibilities of the Shift Engineers are assumed by the Shift Foreman or by another Shift Engineer if the regularly assigned Shift Engineer is unavailable. The Shift Engineer acts as Station GSEP Director during an emergency when he is the highest ranking management man on site.
The Shift Foreman has the same responsibility as the Shift Engineer when the Shift Engineer is unavailable. When the Shift Foreman is on shift with a Shift Engineer, he assists the Shift Engineer. The Shift Foreman will be licensed as a Senior Reactor Operator. When the Shift Foreman is unavailable, the Shift Engineer assumes his responsibilities or another Shift Foreman is scheduled in.
The Instrument Engineer is responsible for instrument calibration and maintenance at the station. The Instrument Engineer functions as the technical expert on all instrumentation at the station and directs the activities of the Control Systems Technicians and Instrument Mechanics. When the Instrument Engineer is unavailable, the Instrument Foreman assumes his responsibilities.
The Instrument Foreman assists the Instrument Engineer in all plant instrumentation work. The function of the Instrument Foreman is to train and direct the Control System Technicians and Instrument Mechanics as directed by the Instrument Engineer. If the Instrument Foreman is unavailable, the Instrument Engineer assumes his responsibilities.
The Maintenance Engineer is responsible for all plant maintenance except instrumentation. He is responsible for training, obtaining tools, spare parts and maintenance procedures. The Maintenance Engineers function is administrative and when he is unavailable, the Master Mechanic assumes his responsibilities. The Maintenance Engineer is a member of the Station Review Board.
13A.5-2
QUAD CITIES FSAR The Master Mechanic assists the Maintenance Engineer. He is responsible for safe work practices, maintenance procedures, record keeping and training. The Master Mechanic schedules the maintenance jobs and properly places the work with the other work groups.
When the Master Mechanic in unavailable, the Maintenance Engineer assumes his responsibilities. The Maintenance Foreman is responsible for directly supervising the training and work activities of the maintenance work force and maintaining records of equipment maintenance.
13A.5.1.2 Technical Staff Position Descriptions The Technical Staff Supervisor supervises and co-ordinates the efforts of the technical staff personnel. The technical staff functions as a support group to the operating and maintenance departments. He is a member of the Station Review Board.
The Radiation Protection Supervisor functions as the technical expert on all chemical and radiation protection matters at the Station and directs the overall activities of the Foremen and Radiation Protection Men. He fills in for the Foreman if he is unavailable.
The Radiation Protection Foreman working for the Radiation Protection Supervisor directs the training and job assignments of the Radiation Protection Men. If the Radiation Protection Supervisor is unavailable, he assumes his responsibilities.
The Nuclear Engineer functions as the technical expert on all nuclear related matters at the Station and is responsible for fuel management. He has two assistants in this work that are capable of filling his position if he is unavailable.
The Thermal Engineer is responsible for the efficient operation of the plant systems and computers and works with the Nuclear Engineer to obtain maximum plant operating efficiency. He directs periodic testing of plant equipment to assure that it is operating efficiently and maintains records and reports such tests. He has two assistants that are capable of filling his position when he is unavailable.
Engineering assistants are used to assist engineers with reports, data taking, record keeping and special job assignments in support of the departments work.
13A.5-3
QUAD CITIES FSAR 13A.5.1.3 Fuel Handling Supervision of the fuel handling group is under the direction of the Operating Engineer who is responsible through a Fuel Handling Foreman for fuel preparation, loading, unloading, in-plant transporting and shipping.
The Fuel Handling Foreman will have a Limited Senior Operating License and is responsible for directing the training and work activities of the Fuel Handlers. Three men will be licensed as Fuel Handling Foremen such that job coverage will always be maintained.
13A.5.1.4 Training Supervisor The Training Supervisor is responsible for the training of new operating personnel and the retraining program for all operating personnel.
In the performance of this work he schedules training, prepares course material, formulates quizzes, gives lectures and plant tours, arranges for special training lectures by other staff personnel and maintains records of each employees training.
13A.5-4
QUAD CITIES FSAR 13A.5.2 Commonwealth Edison - General Electric Administrative Relationships The station startup organization and interrelationships between Commonwealth Edison Company and the General Electric Company are shown in Figure 13A.5-1. Sargent and Lundy, Inc., and United Engineers and Constructors, Inc., (UE&C), are not a part of the station startup organization. One United Engineers and Constructors engineer is being used as Radioactive Waste Disposal Supervisor and his résumé is included in this appendix.
The normal Commonwealth Edison Company Operating Force will be in place prior to fuel loading. The General Electric Shift Supervisor will be assigned to shift at the same time and will be phased out at the end of the 100 hour0.00116 days <br />0.0278 hours <br />1.653439e-4 weeks <br />3.805e-5 months <br /> warranty run.
13A.5.3 Qualifications The bases used for the experience qualifications of plant operating personnel meet or exceed the requirements set forth in ANS-3 Draft Number 9, dated 7/3/69.
It should be recognized the ANS-3 Draft Number 9 addresses itself to our organization having three levels (Plant Manager, Operations Manager and Supervisors) of line management. Quad Cities has four levels of line management (Station Superintendent, Assistant Station Superintendent, Operating Engineer and Shift Engineer / Shift Foreman). The duties of the Operations Manager as conceived by Draft Number 9 are essentially similar to those of the Quad Cities Assistant Superintendent. Quad Cities Operating Engineers are in effect an additional level of supervision and our proposed personnel qualification requirements reflect this fact. In the aggregate, the Quad Cities organization, reflecting the personnel qualifications requirements set forth in the proposed Technical Specifications, will result in greater depth and experience than called for in Draft Number 9.
13A.5-5
QUAD CITIES FSAR 13A.5.3.1 Shift Personnel Qualifications (Operations) 13A.5.3.1.1 Shift Foreman The shift foreman shall have a minimum of a high school diploma or equivalent, and four years of power plant experience of which a minimum of one year shall be nuclear power plant experience. The shift foreman is qualified to operate the Quad Cities Station reactor-turbine-generator unit. He is qualified to instruct, train and assign work to operators on their shift. He shall be licensed as a Senior Reactor Operator for both units.
13A.5.3.1.2 Nuclear Station Operators The Nuclear Station Operators shall have education equivalent to graduation from high school. They shall have a minimum of two years of power plant experience of which a minimum of one year shall be nuclear power plant experience. He shall be qualified to startup, operate and shutdown the Quad Cities Station reactor-turbine-generator unit.
The Nuclear Station Operator must have and maintain an AEC Reactor Operators License for both units.
13A.5.3.1.3 Equipment Operator The Equipment Operator is qualified to assist in controlling the operation of the Quad Cities Station reactor-turbine-generator units. The Equipment Operator is qualified to perform electrical operating and switching outside the main control room. The Equipment Operator shall have the ability to pass the AEC Reactor Operators license examination. His education is equivalent to graduation from high school supplemented by specialized training in power plant operation.
13A.5-6
QUAD CITIES FSAR 13A.5.3.1.4 Equipment Attendant The Equipment Attendant is qualified to check valve line-ups, startup, shutdown, and operate all plant systems acting under approved procedures. The Equipment Attendants education is equivalent to graduation from high school supplemented by specialized training in power plant operation. The Equipment Attendant shall have the ability to pass the AEC Reactor Operators license examination.
13A.5.3.1.5 Radiation Protection Man The Radiation Protection Man shall be qualified to perform radiation surveys in all plant areas, to keep records of radiation levels, to service radiation protection equipment, and to perform laboratory testing work under prescribed and approved procedures. His education is equivalent to graduation from high school.
13A.5.3.2 General Electric Personnel Qualifications 13A.5.3.2.1 Lead Test Design and Analysis Engineer 13A.5.3.2.1.1 Qualification Requirements 13A.5.3.2.1.1.1 Formal Education MS in Nuclear Engineering or Physics or advanced degree in other engineering or scientific field with demonstrated competence in reactor physics.
13A.5.3.2.1.1.2 Experience Minimum of seven years experience in nuclear energy field with at least five years in the power reactor area. The responsibility for designing and conducting tests on nuclear power plants requires several years of experience associated with reactor operation either as direct operation, plant assistance or process development functions. Must be strong in reactor physics and thermal hydraulic fields with sufficient depth in these and one or two other areas to provide consultant level service to startup and operation personnel.
13A.5-7
QUAD CITIES FSAR 13A.5.3.2.2 Test Design and Analysis Engineer I & II 13A.5.3.2.2.1 Qualification Requirements 13A.5.3.2.2.1.1 Formal Education - (I & II)
BS or MS in Mechanical, Electrical, Chemical, Nuclear Engineering or Physics 13A.5.3.2.2.1.2 Experience - (TD&A Engineer I)
Minimum of seven years experience in nuclear energy field with at least five years in the power reactor area. Must be strong in his specialty area and with sufficient depth to provide consultant level service to startup and operating personnel. He must have a demonstrated competence in reactor nuclear and thermal hydraulic behavior.
13A.5.3.2.2.1.3 Experience (TD&A Engineer II)
Normally a minimum of three years experience in nuclear energy field beyond BS degree and at least two years in the power reactor area. Must be strong in his specialty area with sufficient depth to provide reliable soundly-based advice to startup and operating personnel. Must have a demonstrated knowledge of BWR nuclear and thermal hydraulic behavior.
13A.5-8
QUAD CITIES FSAR 13A.5.3.2.3 Automatic Control Systems Engineer 13A.5.3.2.3.1 Qualifications 13A.5.3.2.3.1.1 Formal Education MS or BS with specialized courses in Control System and Servo-Mechanism Theory 13A.5.3.2.3.1.2 Experience Minimum of seven years experience in Control system design and application. Must be strong in his specialty area and with sufficient depth to provide consultant level service to startup and operating personnel. He must have a demonstrated competence to work alone on a field assignment and to work with a variety of people at all levels under conditions of stress and pressure.
13A.5.4 Start-up Personnel Résumés 13A.5.4.1 General Electric Résumés Résumés are attached for the following personnel assigned to the General Electric Company Start-Up Group:
Name Company Position AEC License Ronald H. Leasburg GE Operations Manager No Albert J. Miller GE Operations Supt Yes Denzell R. Shiflett GE Preop Engineer Yes James L. Anderson GE Shift Supervisor Yes David L. Scott GE Shift Supervisor Yes Ralph W. Cote GE Shift Supervisor Yes Dennis J. Turner GE Shift Supervisor Yes Anthony L. Vest GE Start-up ENGR. (Trainee) No William L. Selbe GE Plant Test ENGR. (Trainee) No Joseph F. Vought UE&C Rad Waste Supvr No 13A.5-9
QUAD CITIES FSAR Approximately two months prior to fuel loading, General Electric Company will assign a Lead Test, Design and Analysis Engineer to the site. At one month prior to loading, three Test Design and Analysis Engineers will be assigned. These persons are primarily responsible for the start-up test program. Résumés for these personnel are given in this section.
A Control Specialist, Recirculation, EHC, Feedwater, etc., will be assigned about one month prior to loading.
Chemical personnel will be assigned periodically to monitor plant start-up.
13A.5-10
QUAD CITIES FSAR NAME: Ronald H. Leasburg Quad Cities Position: General Electric Company Operations Manager Age: 37 Formal Education: B.S. Chemistry, Youngstown University Youngstown, OH Related Training:
(a) Radiation Safety in Industry, four week course conducted by Pennsylvania State Department of Labor and Industry at Midland, PA, 1960.
(b) Four month course at Shippingport Atomic Power Station, Reactor Physics, Chemistry, Health Physics, Systems, Casualty and Operating Procedures, Radioactive Waste Disposal and First Aid course conducted in summer of 1960.
(c ) 120 hour0.00139 days <br />0.0333 hours <br />1.984127e-4 weeks <br />4.566e-5 months <br /> review course conducted at Shippingport Atomic Power Station, Reactor Physics, Emergency Procedures, Reactor Operations and Electrical and Control Systems.
(d) January and February 1968, attended five week course in Basic BWR Theory at General Electric, San Jose, CA.
(e) February and March 1968, attended five week course at Vallecitos, General Electric, in Health Physics.
(f) March and April 1968, attended five week course at General Electric, San Jose, CA, in BWR Technology.
(g) Tsuruga Nuclear Power Station, Tsuruga, Japan, attended 120 hour0.00139 days <br />0.0333 hours <br />1.984127e-4 weeks <br />4.566e-5 months <br /> review course leading to licensing exam on plant, given by General Electric Boiling Water Reactor Training Center Staff.
13A.5-11
QUAD CITIES FSAR Experience of R.H. Leasburg (1) July 1970 to present, General Electric Operations Manager at Quad Cities NPS.
(2) Consultant at Fukushima Nuclear Power Station, Japan, with primary responsibility to coordinate the transfer from a construction oriented to an operations oriented station.
(3) March 1969 through March 1970, Operations Superintendent at Tsuruga Nuclear Power Station, a 321 MWe BWR at Tsuruga, Japan. Responsible for the supervision of the General Electric Start-Up Organization through the Preoperational and Plant Start-up period. Completed a license exam given by the General Electric Boiling Water Reactor Training Center Personnel equivalent to the AEC Senior Level.
(4) May 1968 to March 1969, Instructor at the General Electric Company Boiling Water Reactor Training Center.
(5) January 1968 to May 1968, attended training courses at General Electric Company, San Jose, CA. Prepared Preoperational Test Procedures.
(6) June 1967 to January 1968, Efficiency Engineer at Duquesne Light Company, Shippingport Atomic Power Station. Primarily responsible for conducting training program for Operators and Supervisors leading to certification by Naval Reactors.
(7) July 1965 to January 1968, Station Operating Engineer, Duquesne Light Company, Shippingport Atomic Power Station. Responsible for shift operation of the station. This position required certification as Supervisor-in-charge by Naval Reactors.
(8) January 1963 to July 1965, Reactor Engineer, Duquesne Light Company, Shippingport Atomic Power Station. Responsible to the Station Operating Engineer for the safe operation of the reactor. Responsible for conducting all reactor testing. This position required certification as Supervisor-in-charge by Naval Reactors.
13A.5-12
QUAD CITIES FSAR EXPERIENCE (Contd)
(9) June 1962 to January 1963, Radioactive Waste Disposal Foreman, Duquesne Light Company, Shippingport Atomic Power Station. Responsible for Operation of the Waste Disposal Plant and controlling the release of radioactive effluents to the environment.
(10) May 1960 to June 1962, Radiation Control Foreman, Duquesne Light Company, Shippingport Atomic Power Station. Responsible for the Plant Radiation Safety Program. During this period, two refueling operations occurred. Set up emergency procedures with local fire, civil defense and hospital officials.
Conducted a four week training program at a local hospital for doctors and nurses in Radiation Safety and Contamination Control.
(11) September 1956 to May 1960, Reactor Control Chemist, Duquesne Light Company, Shippingport Atomic Power Station; routine secondary plant chemistry control and reactor plant analysis. Developed new procedures for isotope separations. Prescribed chemical additions for control purposes.
13A.5-13
QUAD CITIES FSAR NAME: Albert J. Miller Quad Cities Position: General Electric Company Operation Superintendent Age: 36 Formal Education: B.S. Physics - June 1961 Rensselaer Polytechnic Institute Nuclear Engineering Graduate Work - 26 Hours EXPERIENCE OF A. J. MILLER August 1969 to Present General Electric Company, Atomic Power Equipment Department, Cordova, IL.
Hold position of Operations Superintendent at the Quad Cities Facility. Responsible for day-to-day plant operations and detailed planning and scheduling of start-up activities.
Wrote several of the nuclear systems pre-operational tests and scheduled the pre-operational test and program for this facility.
November 1968 to August 1969 General Electric Company, APED, Morris, IL.
Instructor at BWRTC. As classroom instructor, gave lectures on systems theory and construction and the basic sciences necessary to understand plant operation. As control room instructor, taught the details of all phases of plant operation, including normal start-up and shutdown, emergency procedures and plant responses to induced transients.
August 1968 to November 1968 General Electric Company, APED, Morris, IL.
Participated in and successfully completed the standard twelve-week operators training course at the BWRTC. Passed certification test on Dresden II simulator.
November 1967 to August 1968 Participated in Pressure Vessel Head Refurbishment; Engine Room Component repair, replacement and subsequent test; Acceptance Test Program; Joint Test Group.
13A.5-14
QUAD CITIES FSAR EXPERIENCE (Contd)
February 1996 to November 1967 General Electric Company, KAPL, West Milton, NY.
Plant Engineer on DIG, the U.S.S. Bainbridge prototype at West Milton, NY. This required certification as Engineering Officer of the Watch by Naval Reactors. The Plant Engineer is responsible on shift for all phases of plant operation and the training of all Naval Personnel assigned to his shift. The training of Naval personnel included lectures on plant operation consulting and outlining remedial programs for slow students and serving as chairman on oral qualification boards.
February 1965 to February 1966 General Electric Company, KAPL, West Milton, NY.
Operations Engineer on the DIG Plant at West Milton. The Operations Engineer assists the Plant Engineer in all phases of plant operation. In thirty-three months as a qualified Engineering Officer of the Watch (8/64 - 11/67) I directly supervised, on the average, at least two complete reactor and steam plant start-ups and shutdowns per week.
August 1964 to February 1965 General Electric Company, KAPL, West Milton, NY.
Participated in and successfully completed the six month Engineering Officer of the Watch training program at the DIG prototype located at West Milton, NY.
13A.5-15
QUAD CITIES FSAR EXPERIENCE (Contd)
June 1962 to August 1964 General Electric Company, KAPL, Wets Milton, NY.
Assigned as a physicist in the DIG Nuclear Test and Analysis group. Responsibilities consisted of carrying out the physics test programs on the DIG Reactor and giving periodic basic comprehensive physics lectures to the Naval Officers in the qualification program. The physics tests consisted of writing, performing, data reduction and subsequent report preparation. This involved extensive work on the IBM 1620 computer.
13A.5-16
QUAD CITIES FSAR NAME: Denzell R. Shiflett Quad Cities Position: General Electric Company Plant Test Engineer Age: 34 Formal Education: B.S. Chemical Engineering University of Idaho, June 1963 Previous License No. SOP-1214 Expires July 31, 1971 Currently hold License No. SOP-1214 Docket No. 55-3079 Experience of D. R. Shiflett August 1970 to Present General Electric Company, Atomic Power Equipment Department, Cordova, IL.
Assigned as Preoperational Test Engineer at the Quad Cities facility. Primarily responsible for preparation and direction of all preoperational test activities and initial activation and testing of systems. Also participating in general Start-up activities and operations.
August 1968 to August 1970 General Electric Company, APED, Morris, IL.
Participated in the preparation of preoperational test procedures, direction and operation of plant systems and general pre-start-up activities. Licensed as a Senior Operator on the Dresden Unit II Facility. As a licensed operator, participated in initial fuel loading and all start-up and power testing activities as a Shift Superintendent.
13A.5-17
QUAD CITIES FSAR EXPERIENCE (Contd)
June 1968 to August 1968 General Electric Company, APED, Morris, IL.
Participated in standard twelve-week operators training course at the General Electric Boiling Water Reactor Training Center. Passed certification tests on the Dresden II simulator.
April 1966 to June 1968 Westinghouse Electric Company, Naval Reactors Facility, Idaho Falls, ID.
Plant Operations Crew Supervisor with shift-wide responsibility for reactor and plant operations, coordination of physics testing and training of Naval and Westinghouse personnel in the operation and maintenance of the nuclear plant and propulsion systems. Directly responsible for operating duties, including start-up checkout, console operation during start-up, on-line operation and shutdown and scram recoveries.
August 1965 to April 1966 Westinghouse Electric Company, Naval Reactors Facility, Idaho Falls, ID.
In training on the nuclear plant and auxiliary, associated systems on the A1W prototype reactors. Passed Naval Qualification Tests as Nuclear Plant Engineer and Engineering Officer of the Watch on the A1W plants.
13A.5-18
QUAD CITIES FSAR NAME: James L. Anderson Quad Cities Position: General Electric Company Plant Test Engineer Age: 43 Formal Education: (a) Two years toward a degree in Chemistry at Southwest Missouri State College.
(b) Two semesters of Mathematics; two semesters Personnel Management; two semesters Business Law (Night courses for credit) at Washington State College.
(c ) Four quarters (night courses) Nuclear Physics of Reactor Operators University of California credit Previous License Numbers: 550-1, 550-2 and 550-3 Docket Number: 55-527 Expired Date: 7/25/67 License Numbers: 50-183 and SOP 470 and SOP 470-1 Expired Date 4/6/68 Currently hold License Number: ___*___ Docket Number 55-527
- (Telephone conversation from AEC Licensing Branch that I had passed the Senior License Examination for Dresden II Station while acting as an instructor at the BWR Training Center near Dresden. I have not received the formal license as yet. The exam was given during the week of September 21, 1970).
13A.5-19
QUAD CITIES FSAR EXPERIENCE OF J.L. ANDERSON October 1970 to Present General Electric Company Atomic Power Equipment Department, APED, Cordova, IL., as a Plant Test Engineer at the Quad Cities Nuclear Power Station. Participating in preoperational test activity.
September 1969 to October 1970 General Electric Company, APED, Morris, IL.
Participated in standard twelve-week course at the BWR Training Center and passed the certification tests at the operator and senior level. Acted as lead instructor at the training center through October 2, 1970. Took formal AEC Operator and Senior Exam on Dresden II Reactor during week of September 21, 1970. Per phone conversation, passed both exams.
March 1967 through August 1969 General Electric Company, APED, c/o International General Electric Company in Bombay, India, as a Plant Test Engineer and Shift Supervisor on Units I and II on the Tarapur Atomic Power Station. Participated in the final construction, construction testing, preoperational testing, start-up and operation through turnover to the customer.
1963 to 1967 General Electric Company, Vallecitos. I was a Senior Operator on the EVESR for the start-up to completion of the reactor operation.
1958 to 1963 General Electric Company, Vallecitos. I was a lead operator at the GETR for the initial start-up and first four years of operation. I was qualified on all experiments and test loops.
13A.5-20
QUAD CITIES FSAR EXPERIENCE (Contd) 1949 to 1958 General Electric Company at Richland, WA.
I was radiation monitor for time spent at Hanford. I worked Research Labs, separation plants and Hanford Reactor areas. I participated in start-up of two separation plants and one reactor.
13A.5-21
QUAD CITIES FSAR NAME: D.L. Scott Quad Cities Position: General Electric Company Plant Test Engineer Age: 44 Formal Education: High School Ninety Six High School Ninety Six, SC Previous License Number: OP-1502 Expired: May 10, 1965 Docket Number: 55-1412 EXPERIENCE OF D.L. SCOTT November 1969 to Present General Electric Company, Atomic Power Equipment Department, Cordova, IL.
Assigned as Plant Test Engineer. Participate in preparation of preoperational test procedures, direction and operation of plant systems and general pre start-up activities.
July 1970 to September 1970 General Electric Company, APED, Morris, IL.
Participated in standard twelve-week operators training course at the General Electric Boiling Water Reactor Training Center. Passed Senior Operators Certification Test on the Dresden II simulator.
October 1968 to November 1969 General Electric Company, APED, San Jose, CA.
Assigned as Plant Test Engineer. Participated in the preparation of preoperational tests for various plants including Quad Cities Nuclear Power Station, Unit I.
13A.5-22
QUAD CITIES FSAR EXPERIENCE (Contd)
September 1963 to October 1968 Westinghouse Electric Corporation, Astronuclear Division.
Assigned as a Test Engineer to Test Planning Group at Jackass Flats, NV in the NERVA Project. Participated in the preparation of experimental plans for the NERVA nuclear rocket engine. Also took part in preliminary data reduction and evaluation of data obtained during the conduct of tests.
July 1961 to September 1963 Carolinas-Virginia Nuclear Power Associates, Columbia, SC.
Assigned as a reactor technician. Participated in preparation of plant test procedures including construction tests. Prepared normal and emergency operating procedures.
Received Operators License #OP-1502.
March 1954 to July 1961 General Electric Company, Hanford Atomic Products Operation, Richland, WA.
Assigned to Physics and Instrumentation Research and Development group where my duties were reactor technician at the Physical Constants Test Reactor and Thermal Test Reactor.
13A.5-23
QUAD CITIES FSAR NAME: Ralph W. Cote Quad Cities Position: General Electric Company Plant Test Engineer Age: 44 Formal Education: B.S. Mining Engineering New Mexico Institute of Mining and Technology, 1952 Previous License Number: SOP 534 Expired: Original Exp. 7/6/66 Renewal Exp. 7/6/68 EXPERIENCE OF RALPH W. COTE HPCI & RCIC One Hour Standby Liquid Control One Hour Residual Heat Removal One Hour Auto Blowdown One Hour Core Spray One Hour Reactor Protection System One Hour 10CFR20 One Hour Shielding One Hour Off-Gas System One Hour Standby Gas Treatment One Hour Radwaste Two Hours Reactor Physics Four Hours Fuel, Control Rod and Core Design One Hour MCHFR, Peaking Factors and Thermo-Hydraulics One Hour Fuel Loading Procedures, Including Initial Fuel Loading One Hour Normal and Special Nuclear Detectors and Sources One Hour Shutdown Margin, Fuel Loading Checks, Expected Instrument Response During Loading One Hour Lecture on Dresden II Blowdown Incident Two Hours Recirculation System Flow Control One Hour Reactor Water Level Control One Hour Reactor Instrumentation One Hour Rod Block Monitor and Rod Worth Minimizer One Hour Electro-Hydraulic Pressure Control Two Hours Neutron detectors Two Hours 4160V - 480V Power Distribution Two Hours 120/240V DC and Emergency Power Two Hours Containment Group Isolation Two Hours Process and Area Radiation Monitors Two Hours Thermal Hydraulic Limits Two Hours Design Basis Accidents One Hour Site Emergency Plan One Hour Technical Specifications Fourteen Hours Total Fifty-Seven Hours BWR Training Center - Control Room Operation Five Days 13A.5-24
QUAD CITIES FSAR EXPERIENCE (Contd)
April 1970 to September 1970 General Electric Company, APED, Tsuruga, Japan.
Assigned as Nuclear Operations Technical Advisor to Japan Atomic Power Company JAPC-II BWR, a 357 MWe unit. Acted as Nuclear Operations and Maintenance Consultant to the Customer, monitoring the day-to-day operation and recommending changes and improvements. Occupied the Control Room during start-ups and shutdowns to aid, assist and advise as necessary.
September 1969 to April 1970 General Electric Company, APED, Tsuruga, Japan. Assigned to Plant Test Engineer, Day-Shift Superintendent at the JAPC-II facility. Participated in the preparation of test procedures, pre-op tests, initial activation and operation of systems and general plant start-up activities. Directly supervised initial fuel loading from both the Control Room and the refueling floor alternately.
Directly supervised the initial criticality pulls and the initial critical. Directly supervised or assisted in approximately 90% of the start-up tests, participating in approximately 50 start-ups and shutdowns. Present in the Control Room, directly supervising or assisting, during approximately 1200 hours0.0139 days <br />0.333 hours <br />0.00198 weeks <br />4.566e-4 months <br /> of reactor operation.
13A.5-25
QUAD CITIES FSAR EXPERIENCE (Contd)
April 1967 to September 1969 General Electric Company, APED, Tarapur, India, 434 MWe BWR Station.
Assigned as Plant Test Engineer, Shift Superintendent at the Tarapur facility, Units 1 and 2.
Participated in preparation of system flushing and chemical cleaning procedures and operations, preparation of test procedures, conducting construction testing, per-op testing, initial activation and operation of systems and general plant pre-start-up and start-up activities. Acted as Lead Shift Superintendent with a second General Electric Shift Superintendent to assist in this two-unit plant. All comments herein refer to both units.
Participated in training sessions and passed AEC equivalent Certification Tests on the Tarapur facility. Directly supervised initial fuel loading from both the Control Room and the refueling floor alternately on both reactors. Directly supervised the initial criticality pulls and supervised or assisted in approximately 50% of the start-up tests for each unit, usually different tests on each unit. Participated in approximately 100 start-ups and shutdowns, many time (about 100 hours0.00116 days <br />0.0278 hours <br />1.653439e-4 weeks <br />3.805e-5 months <br />) personally manipulating the controls. Directly supervised both units concurrently from the common Control Room during approximately 2000 hours0.0231 days <br />0.556 hours <br />0.00331 weeks <br />7.61e-4 months <br /> of reactor operation (1000 hours0.0116 days <br />0.278 hours <br />0.00165 weeks <br />3.805e-4 months <br /> each unit).
13A.5-26
QUAD CITIES FSAR EXPERIENCE (Contd)
June 1966 to April 1967 General Electric Company, Vallecitos Nuclear Center, CA.
Assigned as Manager of Maintenance at the ESADA Vallecitos Experimental Super Heat Reactor (EVESR). Duties included direct responsibility for all reactor and turbine plant maintenance; mechanical, electrical and instrumentation. Upon retirement of the Plant in January 1967, responsible for all shutdown activities and planning, including fuel shipping and disposal, plant operations and lay-up.
January 1964 to June 1966 General Electric Company, Vallecitos Nuclear Center, CA.
Assigned as Shift Superintendent at the General Electric Test Reactor (GETR) with shift-wide responsibility for reactor plant operation during start-up, operation, scram recoveries and shutdown. Participated in classroom training covering all phases of reactor operation and radiation protection. Passed AEC Senior Operators License Exam in 1964 and obtained a renewal in 1966. Participated in approximately 80 start-ups and shutdowns during approximately 4000 hours0.0463 days <br />1.111 hours <br />0.00661 weeks <br />0.00152 months <br /> of reactor operation, during which time I often personally manipulated the reactor controls.
October 1963 to January 1964 General Electric Company, Vallecitos Nuclear Center, CA.
Assigned as Supervisor in training for AEC Senior Operator License on Vallecitos Boiling Water Reactor Plant (VBWR) . Participated in reactor refueling, start-up, operation, scram recovery and shutdown, and many training sessions. Unfortunately, the reactor was retired prior to my having an opportunity to apply for the AEC Senior Operators License.
13A.5-27
QUAD CITIES FSAR EXPERIENCE (Contd)
August 1961 to October 1963 General Electric Company, Richland, WA.
Assigned as Shift Supervisor at the KW Plutonium Production Reactor at Hanford Works with shift-wide responsibility for reactor refueling, start-up, operation, scram recovery and shutdown. Participated in many hours of classroom instruction on the job. Completed a Reactor Operators Refresher Course and personally manipulated the controls many times during all conceivable conditions.
May 1961 to August 1961 General Electric Company, Richland, WA.
Assigned as Supervisor in training at the KW Production reactor. Participated the entire time in training on the job and in classroom instruction. Participated in reactor refueling, start-up, operation, scram recovery and shutdown during which time I personally manipulated the reactor controls.
December 1960 to May 1961 General Electric Company, Richland, WA.
Assigned as refueling Crew Supervisor with responsibility for supervision of one shift of the refueling crew. As such, participated in refueling activities at B, C, D, DR, H, F, KE and KW Plutonium Production Reactors. In this capacity, I was fortunate to have the opportunity to observe numerous start-ups at each one of the above reactors.
August 1960 to December 1960 General Electric Company, Richland, WA.
Assigned as Construction Inspector during construction of the new Production Reactor (N Reactor) - Hanford, while awaiting AEC Q Clearance.
13A.5-28
QUAD CITIES FSAR EXPERIENCE (Contd)
June 1952 to August 1960 The Bunker Hill Company, Kellogg, ID., the Union Carbide Company, Grand Junction, CO.
and the American Smelting and Refining Company, Wallace, ID.
During this period, worked at various underground mines in the Western U.S., including lead, zinc and uranium mines. Eventually attained the position of General Mine Foreman with the Bunker Hill Company, with direct responsibility for exploration, production, ventilation, transportation, etc., of about one-third of the largest underground lead-zinc mine in the world. Directly supervised Assistant Mine Foreman, Shift Bosses, Engineers and Geologists, with responsibility for approximately 200 men.
13A.5-29
QUAD CITIES FSAR NAME: Dennis J. Turner Quad Cities Position: General Electric Company Plant Test Manager Age: 28 Formal Education: B.S. Mechanical Engineering California Maritime Academy, July 1965 Previous License Number: OP-2244 Expired: 5/19/69 EXPERIENCE OF D. J. TURNER July 1970 to Present General Electric Company, Atomic Power Equipment Department, Cordova, IL.
Assigned as Plant Test Engineer at Quad Cities I Facility. Participating in preparation of test procedures, initial activation and testing of systems and general pre-start-up activities.
Attending a 180 hour0.00208 days <br />0.05 hours <br />2.97619e-4 weeks <br />6.849e-5 months <br /> BWR-Technology course at plant site. Attended BWR Simulator School at Morris, IL for two weeks reviewing reactor physics and control room operators.
April 1969 to July 1970 Ingalls Ship Building Corporation, Nuclear Power Department, Division of Litton Industries, Pascagoula, MS.
Assigned as Nuclear Engineer and Nuclear Test Engineer on United States Navys SS (N) 637 Class Attack Submarines (S5W Nuclear Power Plant). Participated in all phases of construction and testing of submarine nuclear power plants.
13A.5-30
QUAD CITIES FSAR EXPERIENCE (Contd)
September11, 1966 to April 1969 NS SAVANNAH First Atomic Ship Transport, Inc., American Export-Isbrandtsen Lines, Hoboken, NJ.
Attended Nuclear Power Training Classes at U.S. Merchant Marine Academy from 9/11/66 until 2/10/67. Assigned to NS SAVANNAH as trainee on 2/10/67 and was licensed as a Reactor Operator on May 19, 1967 (License No. OP-2244, Docket No. 55-2616, NS SAVANNAH, Facility License No. NS-1). I sailed on NS SAVANNAH until April 1969 and participated in refueling outage in Galveston, TX in August of 1968.
13A.5-31
QUAD CITIES FSAR NAME: Anthony L. Vest Quad Cities Position: General Electric Company GE Start-Up Engineer Age: 23 Formal Education: B.S. Mechanical Engineering University of Tennessee Knoxville, TN Related Training: GE / BWR Lecture Series; I&SE Field Engineering Program Nuclear Experience: Tech. Director at Browns Ferry Nuclear Plant (TVA); Nuclear Requisition Engineer for Browns Ferry Nuclear Plant (TVA); Pre-op Test Engineer at Quad Cities Nuclear Plant (CECo)
Non-Nuclear Experience: Large steam turbine maintenance and inspection at Gorgas, Atlanta; Gas Turbine installation at Gladeville, TN 13A.5-32
QUAD CITIES FSAR NAME: William Leigh Selbe Quad Cities Position: General Electric Company Plant Test Engineer Age: 26 Formal Education: B.S. Nuclear Engineering Kansas State University Related Training: Elements of Nuclear Engineering #1 (General Electric course - San Jose)
Nuclear Experience: Limited to Triga Mark III Swimming Pool Reactor at Kansas State University used for standby and experiments and subcritical pile; also at KSU used for standby and experiments.
Non-Nuclear Experience: Worked at Monticello Nuclear Generating Plant from June 1967 to July 1968 as Assistant Construction Engineer mainly in the mechanical field, with some experience in the civil portions. Involved reviewing plant status in relationship to schedules and assuring conformity with plant specifications.
Worked in San Jose as Liaison Engineer between GE and Bechtel from July 1968 to September 1969. Involved reviewing A.E. documents to assure conformity with plant specifications, conformity with contract, and completeness. Mainly these documents were construction tests and preop tests.
Worked in San Jose from September 1969 to January 1970 as Plant Test Engineer writing preoperational test procedures.
13A.5-33
QUAD CITIES FSAR EXPERIENCE (Contd)
Worked at Monticello Nuclear Generating Plant as Plant Test Engineer from January 1970 to May 1970 directing the Control Rod Drive Hydraulic Preoperational Test.
Worked at Nuclenor Nuclear Generating Plant as Plant Test Engineer from June 1970 to October 1970 directing the Control Rod Drive Hydraulic and Control Rod Drive Manual Control Preoperational Tests.
13A.5-34
QUAD CITIES FSAR NAME: Joseph F. Vought Quad Cities Position: United Engineers & Constructors Start-Up Engineer Age: 28 Formal Education: Three Semesters College University of Florida Related Training: Naval Nuclear Power School; two years Instructor at NRF, Idaho Nuclear Experience: Approximately six years Reactor Operator; approximately two years Machinery Watch Supervisor. Instructor and Lead Reactor Operator at NRF Idaho. Approximately six months start-up Dresden; approximately one year start-up Quad Cities.
AEC or related Nuclear Licenses: 3353 Reactor Operator (NR)
Machinery Watch Supervisor (NR) 13A.5-35
QUAD CITIES FSAR LEAD STD&A ENGINEER NAME: Eric J. Dean BIRTHDATE: Information withheld in accordance with 10 CFR 2.390 EDUCATION: Degree Institution Year B.S. of Engineering Physics Cornell University 1963 EXPERIENCE:
1963-1965: Westinghouse Electric Company, Astronuclear Division, Pittsburgh, PA Worked on design of NERVA Reactor, both Nuclear and thermo-hydraulic design of reactor core. Also worked on the design and testing of computer codes for use in core design.
1965-1967: Westinghouse Electric Company, Astronuclear Division, Jackass Flats, Nevada Worked on the design of pre-operational and power tests for NERVA Reactor and performed analysis of test results. Also worked on test instrumentation and design of real time computer codes for data reduction.
Jan 1968-1971 General Electric Company, APED, in test design and Analysis Unit.
1968: Prepared Start-up Test Calculations and Instructions, participated in design and testing of process computer.
13A.5-36
QUAD CITIES FSAR EXPERIENCE (Contd) 1969 at Tarapur Station for start-up of two units as TD&A Shift Engineer.
1969-1970 at Tsuruga Station for start-up as TD&A Shift Engineer and returned for Stretch Testing in the position of a Lead Engineer.
1970-1971: Prepared Start-up Test Specifications, Calculations and Instructions. Taught course for Customer Station Nuclear Engineers. Continued testing of process computer.
13A.5-37
QUAD CITIES FSAR TD&A Engineer NAME: William N. Melver BIRTHDATE: 1941 EDUCATION: Degree Institution Year B.S. Mechanical Engineering University of Texas at El Paso, 1966 M.S. Mechanical Engineering University of Texas at El Paso, 1970 EXPERIENCE:
1966-1969: Knolls Atomic Power Laboratory. As an engineer in Thermal and Hydraulic Analysis, performed extensive work in thermal design of primary coolant system of Naval reactors; designed tests in the hydraulic test and development area of these reactors.
1969-1970: University of Texas at El Paso; Teaching Assistant in Mechanical Engineering Department.
1970 - Present: General Electric Company, APED. Engineer in the Test Design and Analysis Unit. Prepared Specifications and Instructions and performed Analysis in preparation for several GE-BWRs.
13A.5-38
QUAD CITIES FSAR TD&A Engineer NAME: Daniel Mangan BIRTHDATE: Information withheld in accordance with 10 CFR 2.390 EDUCATION: Degree Institution Year B.S. Math and Physics Glasgow University, 1958 M.S. Physics Washington State University 1963 EXPERIENCE:
1958-1960: UKAEA - Reactor physics work on Calder Hall and AGR type reactors.
1958-1959: Attended Harwell Reactor School.
1960-1962: Canadian General Electric - worked in physics of organic cooled H20 moderated reactors. (See OTR design report).
1963-1967: General Atomics - Physics Design and Methods Development work on HTGR reactors.
1967-1969: Westinghouse - Astronuclear Laboratory - Design of NERVA (R-1) and critical facility testing of R-1 Mock-up.
September 1969 - General Electric Company, APED, Joined Test Design and Analysis to present Unit. Prepared startup test procedures and performing startup pre-analyses.
Participated in reactor simulator training course. Currently at the Millstone site as TD&A Engineer. Planned participation at Nuclenor site prior to assignment at QC-1.
13A.5-39
QUAD CITIES FSAR TD&A Engineer NAME: James H. Cox, Jr.
BIRTHDATE: Information withheld in accordance with 10 CFR 2.390 EDUCATION: Degree Institution Year B.S. Chemical Engineering Gonzaga University 1961 M.S. Nuclear Engineering University of Washington 1967 EXPERIENCE:
1961-1964: General Electric Company, Hanford - Participated in various inreactor experiments including analysis of data and reporting of conclusions and recommendations.
1964 - June 1970: Batelle - Northwest: Investigated the property changes of graphite due to exposure to neutron irradiation and published the results of these investigations.
Responsible for the program to establish the Fast Flux Test Facility surveillance and in-service inspection systems. Included in this program were the determination of requirements and methods and the direction of appropriate development programs.
June 1970 - Present: GE-APED - In the test Design and Analysis unit prepared GE-BWR Startup Test Specifications and Instructions. Currently at Monticello site.
13A.5-40
QUAD CITIES FSAR Automatic Control Systems Engineer NAME: Brian F. Corcoran BIRTHDATE:
EDUCATION: Degree Institution Year B.S. Aeronautical Engr Rensselaer Polytechnic 1960 M.S. Mechanical Engr University of Washington 1969 EXPERIENCE:
1960-1970: The Boeing Company, Seattle, WA. As a control systems engineer was responsible for the application of various computer techniques to the study of aircraft control. Was involved in the study of many types of electronic and hydraulic hardware in test laboratories.
1970 - Present: General Electric, APED - Worked in the Test Design and Analysis Unit as a Control Systems Specialist. In the position, participated in the development of the standard test instructions for control system testing. Responsible for the development and assembly of special electronic test hardware. Currently at the Monticello site as Automatic Control Systems Engineer.
13A.5-41
QUAD CITIES FSAR 13A.5.4.2 Commonwealth Edison Resumes PERSONAL BACKGROUND RESUME NAME: Reginald C. Basham BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Laboratory Foreman - Quad Cities Station TRAINING: Similar to Rad-Chem. Supervisor SAR Volume II 13.2 U.S.P.H.S. COURSES Basic Radiological Health Occupational Radiation Protection Radionuclide Analysis by Gamma Spectroscopy EXPERIENCE:
9/1970 - Present: Laboratory Foreman Responsible for the direct supervision of the radiation protection personnel.
5/1969 - 9/1970: Engineering Assistant - Quad Cities Station - assisted in the work function of the engineers in the technical staff.
13A.5-42
QUAD CITIES FSAR EXPERIENCE (Contd) 7/1962 - 5/1969 Radiation Protection Man - Dresden Station 8/1959 - 7/1962 Laboratory Man - Dresden Station 9/1956 - 8/1955 Operating - Joliet Station 13A.5-43
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Henry T. Berg BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Fuel Handling Foreman TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
7/1970 - Present: Fuel Handling Foreman - Quad Cities Station Responsible for direct supervision of the movement of new and spent fuel on the site.
6/1969 - 7/1970: Control Operator In training for Nuclear Station Operator 1/1949 - 6/1969: Various Operating jobs at Fisk and Ridgeland Stations, including Control Room operations.
13A.5-44
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Reino O. Bergstrom BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None AEC License -Dresden Station: RO for Unit 1 Year: 1960 PRESENT ASSIGNMENT: Training Supervisor TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
4/70 to Present: Training Supervisor - Quad Cities Station Responsible for training operating personnel at Quad Cities Station.
12/69 - 4/70: Shift Engineer In charge and responsible for an assigned work shift and shift personnel training.
3/66 - 12/67: Shift Foreman - Kincaid Station Responsible and in charge in the absence of the Shift Engineer of the station operation during an assigned work shift.
13A.5-45
QUAD CITIES FSAR EXPERIENCE (Contd) 10/61 - 3/66: Licensed Operator - Dresden Station 3/39 61: Operating, including Control Room operation at Northwest and Ridgeland Stations.
1/35 - 3/39: Commonwealth Edison Company Division Office 13A.5-46
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: W. Robert Blythe BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Associate Degree in Science from Rockford College in 1966.
DEGREE: Associate Degree PRESENT ASSIGNMENT: Shift Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
12/67 to Present: Shift Engineer - Quad Cities Station In charge and responsible for an assigned work shift and shift personnel training.
2/62 - 12/67: Shift Supervisor - Sabrooke Station Responsible and in charge of the station during an assigned work shift.
7/47 - 2/62: Operating - Fordam Station 13A.5-47
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Ralph W. Bohn BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating Fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station.
Operating in Control Room on shift since 11/4/69.
10/45 - 6/69: Operating jobs, including Turbine Operator at Dixon Station.
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-48
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Boyd W. Brickman BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed*) - Quad Cities Station Operating in Control Room on shift since 11/4/69.
11/45 to 6/69: Operating, including switchboard operation - Will County and Joliet Stations.
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-49
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Glenn E. Conschack BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None AEC License - Dresden Station: RO for Unit 1 Year: 1960 PRESENT ASSIGNMENT: Shift Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
12/67 to Present: Shift Engineer - Quad Cities Station In charge and responsible for an assigned work shift and shift personnel training.
3/64 to 12/67: Shift Engineer and Shift Foreman - Joliet Station 3/59 to 3/64: Licensed Operator - Dresden Station 4/47 to 3/59: Operating - Joliet Station 13A.5-50
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Joseph R. Cygan BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed*) - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
7/52 to 6/65: Operating - Will County and Fisk Stations.
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-51
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Tulon F. Davis BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Shift Foreman - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
5/70 to Present: Shift Foreman - Quad Cities Station Responsible and in charge in the absence of the Shift Engineer for the station during an assigned work shift.
6/69 to 5/70: Operating - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
6/51 to 6/69: Operating, including Control Room operations - Waukegan Station and Kincaid Station.
13A.5-52
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Gus J. Demos BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
11/50 - 6/69: Operating - Ridgeland and Fisk Stations.
- He will receive this title when he receives his AEC Operating License for Unit 1 13A.5-53
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Irwin Frishkorn BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None AEC License - Dresden Station: RO for Unit 1 Year: 1960 PRESENT ASSIGNMENT: Shift Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
4/70 to Present: Shift Engineer - Quad Cities Station In charge and responsible for an assigned work shift and shift personnel training.
12/67 to 4/70: Shift Foreman - Quad Cities Station Responsible and in charge in the absence of Shift Engineer for the station during an assigned work shift.
8/59 to 12/67: Operating - Licensed Operator - Dresden Station.
9/42 to 8/59: Operating - Calumet Station 13A.5-54
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Harold E. Gnoske BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
11/52 to 6/69: Operating - Waukegan Station
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-55
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Kenneth L. Graesser BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Michigan College Mining & Tech DEGREE: BSME Year: 1960 Professional Engineering License, State of Illinois - 1965 PRESENT ASSIGNMENT: Master Mechanic - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
4/69 to Present: Master Mechanic Supervise the activities of the Maintenance Department, both Electrical and Mechanical.
8/64 to 4/69: Mechanical Engineer - Sabrooke Station Supervised Maintenance Department 6/60 to 8/64: Assistant Engineer - Engineering Department Worked on miscellaneous mechanical engineering project.
13A.5-56
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Anthony A. Griffiths BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Three semester hours, Illinois Institute of Technology DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating in the Control Room on shift since 11/4/69 5/51 to 6/69: Operating - Ridgeland and Will County Stations.
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-57
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: John F. Gudac BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: University of Notre Dame DEGREE: BSME PRESENT ASSIGNMENT: Tech Staff Supervisor TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
4/70 to Present: Tech Staff Supervisor - Quad Cities Station Responsible for nuclear engineering, thermal and mechanical engineering, radiation protection and surveillance, chemical surveillance and other engineering matters.
12/67 to 4/70: Shift Engineer In charge and responsible for operation and training on an assigned work shift.
11/63 to 12/67: Engineer-Tech Staff - Joliet Station Supervised the instrument mechanics on U 1-6 side.
Performed equipment efficiency tests.
13A.5-58
QUAD CITIES FSAR EXPERIENCE (Contd) 4/63 to 11/63: Engineer-Tech Staff - Ridgeland Station Participated in performance tests on boiler, turbines and other auxiliary equipment.
3/59 to 4/63: Engineer-Tech Staff - Dresden Station Participated in performance tests on the turbines, feedwater heater and other auxiliary equipment. Participated in the original fuel loading of Dresden Unit 1 core. Followed the fuel inspection on all new fuel received at the site.
2/56 to 3/59: Engineer - Company Training Program Brief assignments in various company departments.
13A.5-59
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: George R. Hacke BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
5/53 to 6/69: Operating, including position of Boiler Operation - Joliet Station
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-60
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: John B. Heilman, Jr.
BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Purdue University DEGREE: BSME PRESENT ASSIGNMENT: Operating Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
12/67 to Present: Operating Engineer - Quad Cities Station Supervise and be responsible for operation of all the stations mechanical and electrical equipment.
8/67 to 12/67: Station Efficiency Engineer - State Line Station Supervised the activities of the efficiency department.
2/66 to 8/67: Assistant Operating Engineer - Mechanical - State Line Station Assisted the Operating Engineer in the supervision of the operation of all the stations mechanical equipment.
13A.5-61
QUAD CITIES FSAR EXPERIENCE (Contd) 3/65 to 2/66: Shift Engineer and Shift Foreman - State Line Station In charge and responsible for station during an assigned work shift.
11/63 to 3/65: Engineer - State Line Station Participated in performance tests on the boiler, turbine and other auxiliary equipment.
3/59 to 11/63: Engineer - Fisk Station Participated in performance tests on the boiler, turbines and other auxiliary equipment.
6/58 to 3/59: Generating Station Efficiency Staff Performed heat rate checks on the turbines.
9/57 to 6/58: Engineer - Company Training Program Brief assignments in various company departments.
13A.5-62
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Donald W. Hoffman BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
1/49 to 6/69: Operating, including Control Operator position - Crawford Station
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-63
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Robert L. Holman BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
8/59 to 6/69: Operating, including switchboard operation - Joliet Station 12/57 to 8/59: Clerical Department, Chicago
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-64
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: David A. Johnson BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Shift Foreman - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
12/67 to Present: Shift Foreman - Quad Cities Station Responsible and in charge in the absence of the Shift Engineer for the station during an assigned work shift.
7/52 to 12/67: Operating, including switchboard operation - Will County and Joliet Stations.
13A.5-65
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Nicholas J. Kalivianakis BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: 1 year at Wilson Junior College 3 years at Illinois Institute of Technology DEGREE: BSEE Year: 1957 PRESENT ASSIGNMENT: Operating Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
12/67 to Present: Operating Engineer - Quad Cities Station Supervise and be responsible for operation and maintenance of all the stations mechanical and electrical equipment.
1/63 to 12/67: Engineer - Central Efficiency Office.
Worked on the boiler, turbine and auxiliary electrical systems and check out during the start-up of 9 units.
2/58 to 1/63: Engineer - Testing Engineer Worked on generator, transformer and electrical systems.
13A.5-66
QUAD CITIES FSAR EXPERIENCE Contd) 6/56 to 2/58: Engineer - Company Training Program.
Brief assignments in various company departments.
6/50 to 6/56: Engineer - Testing Department Worked on generator, transformer and electrical systems.
13A.5-67
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Robert E. Kelly BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Shift Foreman - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
12/67 to Present: Shift Foreman - Quad Cities Station Responsible and in charge in the absence of the Shift Engineer for the station during an assigned work shift.
7/52 to 12/67: Operating - Sabrooke Station 13A.5-68
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Charles E. Kepler, Jr.
BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating in the Control Room on shift since 11/4/69.
7/48 to 6/69: Operating - Sabrooke Station.
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-69
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Paul D. Krippner BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating on shift since 11/4/69.
3/67 to 6/69: Operating - Waukegan Station
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-70
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Donald C. McCarthy BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating Fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating on shift since 11/4/69.
5/67 to 6/69: Instrument Mechanic B - Will County Station 11/56 to 5/67: Operating - Will County Station
- He will receive his title when he receives his AEC Operating License for Unit 1.
13A.5-71
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Walter E. Meehan BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: 3 years at Illinois Institute of Technology DEGREE: None PRESENT ASSIGNMENT: Shift Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
12/67 to Present: Shift Engineer - Quad Cities Station In charge and responsible for an assigned work shift and shift personnel training.
4/61 to 12/67: Shift Foreman - Ridgeland Station Responsible and in charge during the absence of the Shift Engineer for the station during an assigned work shift.
9/41 to 4/61: Operating - Ridgeland and Northwest Stations.
13A.5-72
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Larry G. Monroe BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating on shift since 11/4/69.
10/65 to 6/69: Operating - Waukegan Station
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-73
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Michael Naughton BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: St. Thomas College, St. Paul, Minnesota DEGREE: BS in Chemistry Year: 1958 PRESENT ASSIGNMENT: Radiation Protection Supervisor TRAINING: Reference SAR Volume II 13.2 Basic Radiation Health Course, U.S.P.H.S.
Occupational Radiation Protection, U.S.P.H.S.
Radionuclide Analysis by Gamma Spectroscopy, U.S.P.H.S.
Management of Radiation Accidents, U.S.P.H.S.
Nuclear Fuel Management - 24 sessions (Commonwealth-Purdue)
BWR Reactor Chemistry - Three months (GE)
Dresden Site Training (Three Weeks)
EXPERIENCE:
5/69 to Present: Radiation Protection Supervisor Responsible for the supervision and operation of the department, training of new radiation men, evaluation of chemistry results and radiation surveys.
1/65 to 5/69: Power Plant Chemical Engineer - Riverside Station.
Conducted laboratory analysis of power plant chemistry.
Supervised the tech staff department.
13A.5-74
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Frank A. Palmer BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Ohio Northern University DEGREE: BSME Year: 1949 AEC License - Dresden Unit 1: RO-805, 1960 SOP-324, 1964 PRESENT ASSIGNMENT: Station Superintendent TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
8/67 to Present: Superintendent of Quad Cities Nuclear Power Station Supervise and be responsible for the operation and maintenance of the Station; the primary functions are administrative.
12/66 to 8/67: Assistant Superintendent - Joliet Station Overall supervision of the operation and maintenance for Joliet Station Units 7-8.
8/65 to 12/66: Operating Engineer - Mechanical - Dresden Station Supervise and be responsible for operation and maintenance of all station mechanical equipment.
13A.5-75
QUAD CITIES FSAR EXPERIENCE (Contd) 11-63 to 8/65: Technical Staff Supervisor - Dresden Station Responsible for nuclear engineering, thermal and mechanical engineering, radiation protection and surveillance, chemical surveillance and other engineering matters.
1/63 to 11/63: Tech Staff Engineering - Dresden Station Responsible for the nuclear engineering and physics tests on the reactor. Conducted special tests to determine maintenance requirements of major plant equipment.
7/60 to 1/63: Shift Engineer - Dresden Station In charge and responsible for station during an assigned work shift.
7/58 to 7/60: Thermal Engineer - Dresden Station Supervision of equipment testing, thermal cycle efficiency and preparation of operating procedures for safe and efficient plant operation.
2/58 to 7/58: Engineer - Joliet Station Conducted performance tests on station auxiliary equipment.
Prepared station performance reports.
10/56 to 2/58: Engineer - Generating Station Office Assisted in comments on designs of future coal plants.
13A.5-76
QUAD CITIES FSAR EXPERIENCE (Contd) 10/53 to 10/56: Engineer - Waukegan Station Conducted performance tests on station auxiliary equipment.
Prepared station performance reports.
1/53 to 10/53: Engineer - Company Training Program Brief assignments in various company departments.
13A.5-77
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Ramon H. Raguse BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating on shift since 11/4/69.
8/53 to 6/69: Operating - Joliet Station
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-78
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Gerald W. Reardanz BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Fuel Handling Foreman TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
7/70 to Present: Fuel Handling Foreman - Quad Cities Station Responsible for the supervision of the movement of new and spent fuel on the site.
10/69 to 7/70: Nuclear Fuel Handler A - Dresden Station 5/67 to 10/69: Operating - Dresden Station 13A.5-79
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Al Roberts BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Shift Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
4/70 to Present: Shift Engineer - Quad Cities Station In charge and responsible for an assigned work shift and shift personnel training.
12/67 to 4/70: Shift Foreman - Quad Cities Station Responsible and in charge in the absence of the Shift Engineer for the station during an assigned work shift.
5/49 to 12/67: Operating, including Control Room operation - Kincaid and Ridgeland Stations.
1/48 to 5/49: Meter Department 13A.5-80
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: George Roth BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Shift Foreman - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
5/70 to Present: Shift Foreman - Quad Cities Station Responsible and in charge in absence of the Shift Engineer for the station during an assigned work shift.
6/69 to 5/70: Operating - Quad Cities Station Operating in the Control Room since 11/4/69.
11/47 to 6/69: Operating, including Control Room operation - Ridgeland and Calumet Stations.
13A.5-81
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Charles W. Schroeder BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Augustana College and University of Illinois DEGREE: AB in Math and Physics Year: 1968 MS in Nuclear Engineering Year: 1970 PRESENT ASSIGNMENT: Assistant Radiation Protection Supervisor TRAINING: AEC Special Fellowship in Health Physics 1970 Summer Program in Health Physics, Lawrence Radiation Laboratory.
EXPERIENCE:
9/70 to Present: Assistant Radiation Protection Supervisor - Quad Cities Station Responsible for writing monthly and yearly reports, training new radiation men, evaluation of chemistry results and radiation surveys.
13A.5-82
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Vernon I. Schlosser BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Chicago Tech College DEGREE: BSME Year: 1948 PRESENT ASSIGNMENT: Maintenance Engineer TRAINING: Reference SAR Volume II 13.2 - also two months maintenance observation at Hanford.
EXPERIENCE:
4/69 to Present: Maintenance Engineer - Quad Cities Station In charge of all maintenance, mainly concerned with scheduling and planning maintenance and training personnel.
3/63 to 4/69: Supervisory Engineer in Construction Supervised construction of many new plants in the Edison system including Quad Cities Station from 3/66 to 4/69.
10/52 to 3/63: Engineer - Construction Supervised construction of the new plants in the Edison system.
3/49 to 10/52: Engineer - Construction - Structural and Mechanical.
13A.5-83
QUAD CITIES FSAR EXPERIENCE (Contd) 6/48 to 3/49: Engineer - Sales Division.
13A.5-84
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: George V. Sporer BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: 1 year at the University of Wisconsin in Milwaukee 1 year at night school courses in Iowa Junior College system DEGREE: None PRESENT ASSIGNMENT: Maintenance Foreman (Instrument)
TRAINING: Reference SAR Volume II 13.2.
EXPERIENCE:
1/70 to Present: Maintenance Foreman (Instrument) - Quad Cities Station Responsible for direct supervision of instrument mechanics.
2/67 to 1/70: Engineering Assistant - Dresden Station Assisted in the work function of the engineer in the technical staff.
13A.5-85
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Bennie B. Stephenson BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Iowa State DEGREE: BSEE Year: 1950 AEC License - Dresden Unit 1: RO for Unit 1 - OP 1355 SRO for Unit 1 - SOP 477-1 PRESENT ASSIGNMENT: Assistant Superintendent - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
8/67 to Present: Assistant Superintendent - Quad Cities Station Overall supervision of operation and maintenance for Quad Cities Station.
12/66 to 8/67: Operating Engineer - Dresden Station Supervise and be responsible for operation and maintenance of all Station mechanical equipment.
8/65 to 12/66: Technical Staff Supervisor - Dresden Station Responsible for nuclear engineering, thermal and mechanical engineering, radiation protection and surveillance, chemical surveillance and other engineering matters.
13A.5-86
QUAD CITIES FSAR EXPERIENCE (Contd) 10/62 to 8/65: Shift Engineer - Dresden Station In charge and responsible for the shift during assigned work shift and shift training.
7/58 to 10/62: Instrument Engineer - Dresden Station Supervised instrument mechanics and was responsible for calibration and maintenance of all station instruments and control systems.
13A.5-87
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Thomas K. Tamlyn BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: Iowa State University DEGREE: BSEE Year: 1964 PRESENT ASSIGNMENT: Instrument Engineer - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 GE Computer maintenance Course EXPERIENCE:
3/68 to Present: Instrument Engineer - Quad Cities Station Directs and is responsible for calibration and maintenance of all station instruments and control systems.
6/65 to 3/68: Engineer - Testing Department Worked on generator, transformer and electrical systems.
Worked on maintenance of the computer at Kincaid Station.
8/64 to 6/65: Engineer - Company Training Program Brief assignments in various company departments.
13A.5-88
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Donald E. Warren BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Shift Foreman - Quad Cities Station TRAINING: Reference SAR Volume II 13.2 EXPERIENCE:
5/70 to Present: Shift Foreman - Quad Cities Station Responsible and in charge in the absence of the Shift Engineer of the station during an assigned work shift.
6/69 to 5/70: Operator - Quad Cities Station Operating in Control Room on shift since 11/4/70.
8/50 to 6/69: Operator - Waukegan and Kincaid Stations.
13A.5-89
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: Kenneth M. Wogronic BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: None DEGREE: None PRESENT ASSIGNMENT: Nuclear Station Operator (proposed)*
TRAINING: Fundamentals in Atomic Energy Fundamentals in Radiation Protection Operating fundamentals of a nuclear power plant 16-week system description course 12 weeks at the General Electric BWR Training School 1-week refresher course at the GE BWR Training School On-the-job training and field training guides on the equipment at the station.
EXPERIENCE:
6/69 to Present: Nuclear Station Operator (proposed)* - Quad Cities Station Operating on shift since 11/4/69.
2/67 to 6/69: Operating - Ridgeland Station.
- He will receive this title when he receives his AEC Operating License for Unit 1.
13A.5-90
QUAD CITIES FSAR PERSONAL BACKGROUND RÉSUMÉ NAME: J. David Woodward BIRTHDATE & PLACE: Information withheld in accordance with 10 CFR 2.390 COLLEGE: U.S. Naval Academy DEGREE: BS Year: 1960 PRESENT ASSIGNMENT: Technical Staff Engineer - Quad Cities Station.
TRAINING: Reference SAR Volume II 13.2 of Assist. Thermal Engineer EXPERIENCE:
6/69 to Present: Technical Staff Engineer - Quad Cities Station Major responsibilities are in the preoperational testing program.
This includes the test procedures, analysis of test data and coordination of the Tech Staff portion of the test program.
13A.5-91
SUPlIINTItllJlIft 1--- _* .f;;.uiCT1
_______.I*
- L'NARAGlI:
,. ** J*___.,
ASSISTANT I *'0 ..1.:*
SOPBRINTIDOJIIIT
-.::-..... --~.-- - ---1--- ..... -... T~-* . ----I t~M!'_J OPEIlATIIIC ~I~~j"-:-~~- ------u--~N-l~~ --~------~~;;.;;1"-1 [onl:1 fftH;"l [LiM--,
STA" SUPl.,ISOI
- 111:11111 -: SUFf..
r'Tat. ::1 TO , A I
- I I'IIIC1t. ** J., INCR.
- I I:n ~l r,......... ----,.----.1
. ,.....--- ** -----. --.. -- .... _. _._-- -1 * .. _****J 1 L .. __ ._.* L ............ ~
EJ ~r *
- , ...- - -..........-----. ".--1" ----
INST INC
- PUlL IIAlIDLtle at .. lie TIIIINAI.
1-; DC HAITII . .at I
t..:III"!
t!'!~*':
r- PUT : ~TD , AI L~:!-= It.l:~. _.J 1 ** ,
NAlIITIM':1 POIPJtAN POII!HAII JORIIIAil SU'9. ASST. : ASST. POIlIIJtAII
- t____ ._.. _.___ .. ____ .. ______ ...... & ...... ~ .. ~ * ..J OONTROL NUCLIAR PUEL NAIll IJORIIIAffI Dea'o MlcaAlleAL StSTIII STATIOIT "A" ASSIST'S TICH. OPEl.
I NSTI fUlL I .....
HAIII I.wlt.* I ILICTIICAL "IP HAM "A" OPII IMSTI BlUI' MAM "."
Solid Line
Ca..onweatth Rdt.on De.hed Line ---------------Generat Electric rICURI/JA.$-/