ML20009B950
| ML20009B950 | |
| Person / Time | |
|---|---|
| Site: | Salem  |
| Issue date: | 07/10/1981 |
| From: | Miller L Public Service Enterprise Group |
| To: | |
| Shared Package | |
| ML20009B947 | List: |
| References | |
| NUDOCS 8107200062 | |
| Download: ML20009B950 (22) | |
Text
-
A c
wA4
.---s AVERAGE DAILY UNIT P0hTR LEEL DOCKET N0. 50-311 UNIT salem #2 DATE July 10, 1981 COMPLETED BY 609-365-7000X507 TELEPHONE L.K.
Miller 1
MO. NTH June 1981 DAY AVERAGE DAILY POWER LEVEL DAY AVERAGE DAILY P0hTR LEVEL
@!Ke-NET) -
@ME-NET) 1 0
17 o
2 0
18 0
3 0
19 e
4 0
20 0
0 21 0
5 0
6 22 0
0 7
23 0
0 8
24 0
0 9
25 56 0
10 26 56 0
11 27 0
0 0
12 28 i
0 17 13 29 14 0
30 48 15 0
31 16 0
Pg. 2 of 23 8.1-7.R1 8107200042 81071o
' - ~ '
$DRADOCK 05000311 7
TEE"TG DA3 REPCR2 Docker to.: 50-311 dan: : July 10, 1981 L.K. Miller
- 3y,
- m*: 609-365-7000 X507 ermTc sm ts 1.
Chit Nase:
Salem #2 Notas:
2.
Reporting Period: June 1981 3.
Lionnsed 2nar:nal Power 097t):
3411 4.
Namuplate Rating (Gross.%):
1162 5.
Design EW. cal Rating (Net me):
1115 6.
Mme== Dependable Capacity (Gross me): ll49 7.
- vma Wh1e capacity (Net me): 1104 8.
If Cwvyme occur in capacity Ratings (Itams Ntaber 3 2: rough 7) Since Last assxart, Give amasen:
N/A 9.
Power Invel To iflich W.c?.ad, If Any (Net 29de): __
NONE
- 10. anascris For anstrictions, If Acy:
N/A 221s Ncmth Year to Date Ca ulative 720 4,343 10,512
- n. Bours In Wh.g Period
- 12. Ntreer Of Hours anacter Was Critical 256.5 457.9 726.1
- 13. anacter Reserve Shut & wn aours 0
0 0
- 14. Hours Generator On-Line 7R 09R 7R 098 78.098
- 15. Unit asserve Shut &wrt acz:rs 12,090 12,090 12,090
- 16. Gross 2= mal nergy Generated (ms) 0 0
0
- 17. Gross Electrical Ihergy GeneratedOSE) 0 0
0
- 18. Net rw. cal Energy Generated 09E) 0 0
0 0
0 0
- 19. Unit Servi:n facter
- 20. Unit Av=41=hi14ty Factor 0
0 0
- 21. Unit Capacity Factor (Using Mr Net) 0 0
0
- 22. Unit Capacity Factor (Using DER Net) 0 0
0
- 23. Unit Forced Out e Rate 0
0 0
- 24. Sintduwns Splad Over Next 6 Mcriths (Type, Date, ard Duratism of Eacft):
i
- 23. If Shut Down At Dd of asport Period,, Estinated De*J cf Startup:
- 26. Units In '14st Status (Prior to Ccurrercial Cperation):
Forecast Achieved INrmL CRITIcmTr 6/30/80 8/02/80 mmst, EnzmeCI r 9/01/80 6/03/81 6-1-7.R2 rg. 3 of 23 N """
^
(Nir rumnes no twEst mucrIOs oocxEt so.: 50-311 Salem #2 mswrMumi June 1981 UNIT 'NAMm.,
oATE: Tuly 10, 1981 l
l coMcLETEo BY.I.' K. Miller TELEPilONE: 609-365-7000X507 renm or (tmATIO4 sitrrritti LIO10E SYSIUt Q3R14ENT CAUSE APO (DRNCTIVE 1
4 QX)ES JCTION 10 W.
MM TYPE (IDIRS)
DLMN EVINF GOE IGCIOR REI N T I PREVENT RIK3JIWENQB N/A I
~
r l
f 6
1 2
3 4
5 F Formd peanm Methrrl E:xhil'it G - Instructione g t 1-Samme S: Sdiedtaled A-njulgumt rallure(Explain) 1-Manual f r Piiparation of Data kritry Shnets for Licemose B-Mmintenance or ' Dest 2-Manual Scram, rwnt woort(tati rite c-swtueling Wlatory Restrictim 3-Automatic Scram.
(NUNG-0161) t E-4w;rator Training & License Dunninatice
- 4. Continuation of F-htninistrative G-gerational Ertur(Explain)
Previous Outage lH)ther (melain) 5-Load Reduction 9-Other Pag. 4 of 23 8-1-7.R1 a
v
.w DOCKET NO3 50-311 MAJOR PLANT MODIFICATIONS UNIT NAME:
Salem ?
REPORT MONTH June 1981 DATE:
July 10, 1981 COMPLETED BY:
L.K. Miller TELEPHONE:
609-365-7000 X507
- DCR NO.
PRINCIPLE SYSTEM SUBJECT 2EC-0501 Containme t TV Cameras Supply Force Air to Cameras 2EC-0639 Fuel Transfer Modify in accordance with WRAPS 13 2EC-0854 Safeguard Emergency Modify Safeguard Emergency Control Control 2EC-1025 Safety Injection Modify Control Circuit Valve 2-SJ53 2EC-1062 Containment Ventilation Pressure Setpoint 2EC-ll23 Voltage Regulator Remove Resistor R18 2EC-1219 Reactor Coolant Instrumentation for Hot / Cold Leg Temperature 2ET-1226 Main Steam Response Test on the MS167 2EC-1243 4KV Vital Bus Feeder Change 2B4D-2C4D, 4160/480V i
l l
l l
i l
- DESIGN CHANGE REQUEST 8-1-7.R3 Page 5 of 25 t
DOCKET NO.t 50-311
' MAJOR PLANT MODIFICATIONS UNIT NAME:
Salem #2 REPORT MONTH June 1981 DATE:
July 10, 1981 COMPLETED BY:
L.K. Miller TELEPHONE:
609-365-7000 X507
- DCR NO.
10CFR50.59 SAFETY EVALUATION 2EC-0501 The subject change does not affect any presently performed safety analysis, nor does it create any new safety hazards.
2EC-0639 This change is not safety related and does not affect safety related equip-ment. This change is a result of an above water electric motor replacing an underwater air motor and the addition of monitoring devices.
2EC-0854 The design change is an improvement to an existing design to increase reliability.
It does not modify the function of the equipment.
2EC-1025 The existing design for the control of valve ISJ53 allows the valve to open automatically upon reset of the SSPS tripping signal to the valve.
This would violate the containment isolation integrity. This design change will remedy this problem without changing the function of the valve.
2EC-1062 This modification does not involve an unreviewed safety questicn. The setpoints being changed were not used in the calculations for any presently performed safety analysis.
2EC-1123 This change will not result in any new or additional discharges to the environment.
2EC-1219 This DCR has no impact on the environment because no change to external plant appearance or to nature of effluents.
2ET-1226 The test will ascertain whether the proposed design change will be applicable to improve.the valve performance.
2EC-1243 No change to the basic design or function of the system, therefore no UEQ is involved.
1 Page 6 of 23
SALEM GENERATING STATION SAFETY RELATED EQUIPMENT WORK ORDER LOG UNIT 2 WORK ORDER EXPLANATION OF WORK PERFORMED NUMBER DEPT EQUIPMENT IDENTIFICATION 905287 MD Service Water Description of Problem - 22 Service Water Pump upper motoring bearing was smoking excessively.
Action Taken to Correct - Replaced 22 Service Water Pump motor.
909323 MD 2C Vital Instr. Inverter Description of Problem - Blown fuses.
Slave Action Taken to Correct - Replaced master and slave transformer. Also replaced fuses.
910625 MD 21 Service Water Pump Description of Problem - Check upper motor cooler for leak, found oil space had oil-water and mud in it.
Action Taken to Correct - Removed motor and replaced with new one.
912311 MD 2A 125V Battery Description of Problem - Connect single cell charger to cells 10 and 19.
Action Taken to Correct - Put singic cell charger on cell 19.
4 916837 MD Console Alarm Description of Problem - Check calibration of building low differential pressure alann as it sporadicaly annunciated when all building ventilation systems are out of service.
i Action Taken to Correct - Calibrated device, installe and cleared alarm.
1 i
927636 MD SEC 2C Description of Problem - No testing in progress, 2C diese started along with all 2C bus loads. No safeguard loading lights received.
Action Taken to Correct - Unable to duplicate problem.
(
930076 MD Aux Feedwater Description of Problem - Leaks in headers in Refueling and Primary Water Pump area.
Action Taken to Correct - Removed insulation and found high rad on Refueling Water Storage Tank heat exchanger.
934698 MD Aux Building Supply Fan Description of Problem - Change out filters on 21 and 22 Aux Building Supply Fans.
i Action Taken to Correct - Installed filters.
4 Page 7 of 23 1
CY W
WORK ORDER EXPLANATION OF WORK PERFOkMED
, NUMBER
- DEPT, EQUIPMENT IDENTIFICATION Description of Problem - Perform surveillance test of 2A, 2B and 2C 8EC.
935487 MD SEC Action Taken to Correct - Performed M3B on 2A and 2B SEC only.
935958 MD 21 Emergency Fan Description of Problem - Fan did not respond to hi rad signal during testing.
Action Taken to Correct - Unable to duplicate problem.
l 937703 MD 25 Service Water Pump Description of Problem - Manway has blown off.
Strainer Action Taken to Correct - Installed manway cover with a new gasket.
937953 MD 21SW77, Valve Description of Problem - Valve doesn't seat durang backflow test.
Action Taken to Correct - Installed new spring in valve.
937956 MD 2A, 125V DC Battery Bus Description of Problem - Voltmeter C.R. indicates 140V DC.
Action Taken to Correct - 2A battery charger is on equalize charge for 2A 125 volt battery group. Adjusted equalize charge voltage to 139 volts.
937958 MD 28 Diesel Generator Description of Problem - Generator day tank hi/ low level alarm did not function with hi level in tank.
Action Taken to Correct - Checked nigh level alarm, alarm worked properly.
938009 MD 21 Fan Coil Unit Description of Problem - Motor cooler drain cap missing.
Action Taken to Correct - Installed 3/8" cap.
938049 MD 25 Service Watr Pump Description of Problem - Strainer has broken ehear key.
Strainer Action Taken to Correct - Gear box motor drive key sheared, replaced key.
938062 MD 23 Service Water Pump Description of Problem - Repack pump, excessive leakage.
Action Taken to Correct - Repacked pump.
7 I
938103 MD 2CVS6, Valve Description of Problem - Valve needs to be repacked.
Action Taken to Correct - Repacked valve.
i i
l Page 8 of 23
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 938107 MD 23 Rod Drive Vent Fan lescription of Problem - Will not start.
Action Taken to Correct - Adjusted and retested hieaker 2B5X.
938111 MD 2C Vital Instr. Inverter Description of Problem - Inverter tripped out of service.
Action Taken to Correct - Replaced fuses and burnt wire, also adjusted phase bank of master and slave.
938112 MD 2C Emergency Diesel Description of Problem - Pre-lube on pump failure, alarm will not clear.
Action Taken to Correct - Repaired flow device.
938118 MD 21 Concentrates IIoldup Tank Description of Problem - Pump seized.
Transfer Pump Action Taken to Correct - Rebuilt and reinstalled pump.
938138 MD 24 Containment Fan Cooler Description of Problem - Service water leak at flange between 24SW74 and 245W75 valves.
Action Taken to Correct - Replaced rubber gaskets.
938140 MD 22 Service Water Pump Description of Problem - Strainer pressure controller not wired up and protective cover is not installed.
Action Taken to Correct - Installed new differential device 2PD286 on strainer.
938141 MD 22 Service Water Pump Description of Problem - Plexible hose in the gland seal water supply line is leaking excessively.
Action Taken to Correct - Replace with new hose.
938148 MD 24SW75, Valve Description of Problem - 3/4" instrument line by valve is leaking some-where under insulation.
Action Taken to Correct - No leak detected.
938462 MD 21SJ54, Valve Description fo Problem - Check or repack 21SJ54, can't maintain accumulator level.
Action Takan to Correct - Repacked valve.
Page 9 of 23
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 938490 MD 22 Boric Acid Tank Description of Problem - 22CV159 valve, setscrew not installed, valve inoperable.
Action Taken to Correct - Replaced setscrew in handwheel.
938579 MD 21SJ54, Valve Description of Problem - Valve leaks thru.
Action Taken to Correct - No apparent problem.
938634 MD 24MS167 valve Description of Problem - Adjust closed limit switch when valve is closed.
Action Taken to Correct - Adjusted limit switch, 938670 MD 22MS171, Valve Description of Problem - Valve is leaking thru and continuously blowing steam out vent on roof.
Action Taken to Correct - Seat has small cut below cage, will repair at next outage.
939720 MD Diesel Generator Dampers Description of Problem - Exercise and lubricate dampers.
Action Taken to Correct - Exercised and lubricated dampers.
939721 MD 23-24MS167, Valves Description of Problem - Drain MSIV hydraulic system and refill, also change in line filter and clean reservoir filter.
Action Taken to Correct - Replaced oil during Unit 2 startup operation /
testing.
939724 MD Station Ettteries Description of Problem - Perform weekly surveillance on all station batteries.
Action Taken to Correct - Performed weekly surveillance.
939745 MD 2A SEC Description of Problem - Coordinate with Operations during mode 5 to initiate a safety injection and determine if 2A SEC resets.
Action Taken to Correct - Found transients from field wiring from 2BVDC relay on resc circuit.
939747 MD 125V DC Battery 2C Description of Problem - Perform quarterly battery summary.
Action Taken to Correct - Completed summary.
Page 10 of 23
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 939748 MD 125V DC Battery 2B Description of Problem - Perform quarterly battery summary.
Action Taken to Correct - Completed summary.
939749 MD 28V DC Battery 2A Description of Problem - Perform quarterly battery summary.
Action Taken to Correct - Completed summary.
939776 MD Station Batteries Description of Problem - Perform weekly surveillance on all station batteries.
Action Taken to Correct - Performed weekly surveillance.
939783 MD Letdown Line Description of Problem - Inspect pipe hangers on letdown line.
Action Taken to Correct - Check all hangers.
939784 MD 125V Battery 2B Description of Problem - Perform monthly summary.
Action Taken to Correct - Completed quarterly summary.
939822 MD 24 Fan Coil Unit Description of Problem - Retest breaker for slow speed.
Action Taken to Correct - Tested breakers, replaced new overloais.
939825 MD Spare RII3, Valve Description of Problem - Install new springs and parts in valve.
Action Taken to Correct - Installed new parts and lift set.
939832 MD 23 Aux Feed Pump Turbine Description of Problem - Disassemble governor valve and inspect valve internals for evidence of foreign material.
Action Taken to Correct - Disassembled, inspected, reassembled.
939847 MD 2MS52, Valve Description of Problem - Inspect valve for foreign material.
Action Taken to Correct - Inspected valve.
939848 MD 2MS135, Valve Description of Problem - Inspect valve for foreign material.
Action Taken co Correct - Inspected valve.
Page 11 of 23
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 939850 MD 23MS11 Description of Problem - Retest-lift check outer unit returns to service.
1 Action Taken to Correct - Tested valve, valve lifted at 1125 and 1121.
941839 MD 2C Diesel Prelube Pump Description of Problem - Investigate and repair failure alarm. Pump is running but alarm is up will not reset.
i Action Taken to Correct - Repaired flow device.
a a
I 1
1 941976 MD MS ALS-2 Description of Problem - Hot clearance needs to be set.
Action Taken to Correct - Hand tighten support.
l, 941977 MD MSALS-3 Description of Problem - Hot clearance needs to be set.
Action Taken to Correct - Hand tighten support.
J 1
j 941978 MD MSALS-4 Description of Problem - Hot clearance needs to be set.
Action Taken to Correct - Hand tighten support.
941979 MD MSALS-5 Description of Problem - Hot clearance needs to be set.
j Action Taken to Correct - Hand tighten support.
I 1
941980 MD MS ALS-6 Description of Problem - Hot clearance needs to be set.
Action Taken to Correct - Hand tighten support.
I 941981 MD MSALS-8-9 Description of Problem - Hot clearance needs to be set.
)
Action Taken to Correct - Hand tighten support.
I 941982 MD MSALS-10 Description of Problem - Hot cleararce needs to be set.
Action Taken to Correct - Hand tighted support.
]
941983 MD MS ALS-ll Description of Problem - Hot clearance needs to be set.
i
~
Action Taken to Correct - Hand tighten support.
941984 MD MSALS-13 Description of Problem - Hot clearance needs to be set.
Action Taken to Correct - Hand tighten support.
Page 12 of 23
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED sB5 MD MSALS-12 Description of Problem - Hot clearance needs to be set.
Action Taken to Correct - Hand tighten support.
941986 MS MSALS-14 Description of Problem - Hot clearance reeds to be set.
?
Action Taken to Correct - Hand tighten support.
942403 MD Elev. 100, Containment Description of Problem - Replace damaged bearing.
Outer Door Action Taken to Correct - Replaced bearing.
942411 MD 22MS167, Valve Description of Problem - Supply an electrician to make connections to visicorder in support of SUP53.
Action Taken to Correct - Ran temp wire for testing of MS167 valves.
942686 MD 2PS24 Description of Problem - Repack v.
3.
Action Taken to Correct - Repacked valve with 7 rings below linteln and 7 rings above.
942695 MD 22SW57 Description of Problem - Repack valve.
Action Taken to Correct - Tightened packing, stopped leak.
942859 MD 24 Containment Fan Coil Unit Description of Problem - High speed breaker trips after start.
Action Taken to Correct - Tound wrong breaker in bus cubicle. Replaced with proper breaker, also greased motor bearings and fan shaft bearings.
943094 MD Main Steam Stop Valves Description of Problem - Cleanup 22MS167 valves, by-pass valve as well as the SU-1. 2 and 3 hydraulic fluid direction solenci19 tar hydraulic system inspection.
Action Taken to Correct - Cleaned 2.993 shaft and block 2.999, also replaced shultte valve.
943115 MD 22RC10, 11, 12 Valves Description of Problem - Repack valves.
Action Taken to Correct - Repacked valves.
Page 13 Of 23
I WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 943134 MD 23SJ54, valves Description of Problem - Repack valve.
Action Taken to Correct - Repacked valve.
943135 MD 2NT55, Valve Description of Problem - Repack valve.
Action Taken to Correct - Repacked valve.
943176 MD 21SJ58, Valve Description of Problem - Repack valve, i
Action Taken to Correct - Repacked valve.
943177 MD 2CC136, Valve Description of Problem - Repack valve.
Action Taken to Correct - Repacked valve.
943178 MD 2CCll3, Valve Description of Problem - Repack valve.
Action Taken to Correct - Repacked valve.
943179 MD 2CCll7, Valve Description of Problem - Repack valve.
Action Taken to Correct - Repacked valve.
{
943852 MD 24MS167, Valve Description of Problem - Valve starts to drift open for no reason.
Action Taken to Correct - Compressed packing and torque packing nuts.
j u
943931 MD 2PS2, Valve Description of Problem - Valve very difficult to operate with reach rod.
h Action Taken to Correct - Reach rod was stuck in closed position, loosened cdjusting screw and freed reach rod.
L i
j 943932 MD 2PS4, Valve Description of Problem - Roach rod disconnected from valve.
Action Taken to Correct - Put new bonnet and packing gland, also tightened i
valve and adjusted nut until the valve was i
turning easy.
945005 MD 13SCO24, Valve Description of Problem - Valve leaking.
Action Taken to Correct - Installed new valve body.
4 j
Page 14 of 23
WORK ORDER EXPLANATION OF WORM PERFORMED NUMBER DEPT EQUIPMENT IDENTTFICATION 945038 MD Service Water System Description of Problem - 225W5 check valve blew a flange gasket.
Action Taken to Correct - Replaced gasket.
945073 MD 25 Fan Coil Unit Description of Problem - Flow meter flange for FCU rubber gasket blown out.
Action Taken to Correct - Retightened bolts on flanges.
945600 MD 22 Stop Valve Description of Problem - Open limit switch will not make-up.
Action Taken to Correct - Adjusted limit switch linkage.
945678 MD 2B Diesel Cenerator Description of Problem - Generator was not starting at Tech. Spec. times.
Action Taken to Correct - Replaced air starter on 2B diesel.
I 945696 MD 23MS178, Valve Description of Problem - When 23MS7 is open valve makes loud screaming noise.
Action Taken to Correct - Replaced plug spring, j
l 947231 MD 2PR6, Valve Description of Problem - While trying to open the valve, the closed limit l
light goes out, but the open limit light does not light.
Action Taken to Correct - Reset limit switch on valve and stroked valve.
947582 MD 24 Fan Coil Unit Description of Problem - Replace 2nd cooler down primary bank.
Action Taken to Correct - Replaced primary bank.
947799 MD 21 Aux Feed Pump Description of Problem - Check pump housing seal.
l Action Taken to Correct - Replaced pump casing gaskets.
l l
947804 MD 24 Reactor Coolant Prep Description of Problem - While attempting to remove pipe cap on 24CC292 the entire pipe turned.
Action Taken to Correct - Pipe wrench must be used to remove pipe cap.
Line is connected with compression filters.
l l
l 947917 MD 2A SEC Description of Problem - SEC would not reset from the Control Room from a mode 1 actuation.
Action Taken to Correct Couldn't duplicate problem.
1 1
Page 15 of 23 E
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERPORMED 948011 MD 23MS167, Valve Description of Problem - Starts to drift open for no reason.
Action Taken to correct - Compressed packing and torque packing gland nuts.
948026 MD 2PR47, Valve Description of Problem - Valve leaks thru.
Action Taken to Correct - Replaced bonnet gasket.
948031 MD 22, 24SJ138, Valves Description of Problem - Repack valves.
Action Taken to Correct - Repacked valve.
948105 MD 23 Service Water Pump Motor Description of Problem - Repair erroded flanges.
Cooler Action Taken to Correct - Repaired flanges.
948186 MD 125V DC Battery 2A Description of Problem - Perform summary test.
Action Takup to Correct - Completed quarterly station battery summary.
948199 MD 22 Service Water Pump Motor Description of Problem - Remove 22 Service Water Pump motor and check pump base.
Action Taken to Correct - Motor sent out for repair and then reinstalled motor.
928221 PD Reactor Coolant System Description of Problem - Measure AP for each RCS flow transmitter with 4 RCP's in service at 547*.
Action Taken to Correct - Measured pressures.
928365 PD Portable Vacuum Pump Description of Problem - Vacuum gauge required to verify moisture has been removed.
Action Taken to Correct - Vacuum gauge picked up, 928652 PD 2 MSS 2, Valve Description of Problem - Install limit switches and covers.
Action Taken to Correct - Assisted electricians in replacing limit switches.
928698 PD 23BF19, Valve Description of Problem - Stroke valve.
Action Taken to Correct - Extended stem then stroked valve.
, Page 16 of 23
. _ =
=
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 932616 PD SSPS Train B Description of Problem - Remove diode in 4007 from TLB 621A for use on Unit 1 TLA 621 Train A.
Replace dioda in Unit 2 when available.
Action Taken to Correct - Installed diode in Unit 1 and replaced diode in Unit 2.
932618 PD Main Steam Flow Transmitters Description of Problem - Isolate all steam flow transmitters while Catalytic performs work on flow taps.
Action Taken to Correct - Removed all steam flow transmitters.
932620 PD SSPS Train A Description of Problem - SI block from low pressurizer pressure was lost while placing pressurizer pressure CH. I in test p
for functional procedure.
Action Taken to Correct - Replaced Universal Card 411.
932753 PD NIS Power Fange Description of Problem - Reset all power range rod stop setpoints to 25%.
Action Taken to Correct - Completed procedure.
934345 PD PD-270, 230, 246, 323, Description of Problem - Recalibrate due to out of calibration test equip-233, 242, 239, 347, 339 ment being used to calibrate above gauges.
Action Taken to Correct - Calibrated above gauges.
934614 PD 21MS39 and 41 Description of Problem - No open indication.
Action Taken to Correct - Connected positioner linkage on 22MS29 and this corrected the problem with 22MS41.
937710 PD 22 Fan Coil Unit Description of Problem - When in low speed the service water flow does not go to hi flow, i
Action Taken to Correct - Freed sticking valve 22SW57.
937769 PD Power Range t Power Ch. 2 Description of Problem - Bezel indicator failed.
Action Taken to Correct - Indicator was stuck at less than 04.
Removed and calibrated.
937960 PD 2N44 Power Range Description of Problem - Upper flux.05 high and 10.022V DC required 10 +.010V DC.
Action Taken to Correct - Adjusted NM-306 10.00lV DC.
Page 17 of 23 7
WORK ORD"R NUML_iR DEPT EQUTPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 938053 PD 22AF21, Valve Description of Problem - Will not increase above 90% or decrease below 15%.
Action Taken to Correct - Calibrated 2NS5968.
938056 PD 22AP21, Valve Description of Problem - Demand position is drifting off of the 95% value.
Action Taken to Correct - Replaced defective op amp 2M307.
f 938061 PD 21 Reactor Coolant Pump Description of Problem - Check bistable on Loop 21 Chant.el 1, flow e1 *atic Loop 21 operation with Pump O/S.
Action Taken to Correct - Replaced 2FC414.
938090 PD 22 Pan Coil Unit Description of Problem - Low speed service water flow is only 1800 gpm.
l Action Taken to Correct - No apparent problem.
l I
93809' PD 2PS3, Valve Description of Prob'.am - Valve indicates 20% open on demand and full l
closed on pushbutton.
Action Taken to Correct - Replaced op-amp.
P 938094 2CV172, Valve Description of Problem - Exceeded surveillance max stroke limit of 300 sec.
Action Taken to Correct - Exercised valve several times and polished stem with emory cloth.
4 938135 PD 23SJ20, Valve Description of Problem - Valve indicates open and closed with valve closed.
Action Taken to Correct - Limit switch full of boric acid, cleaned limit switch up.
938145 PD 2PS3, Valve Description of Problem - When in manual and decrease light is lit, valve will drift open to 20%.
Action Taken to Correct - Replaced meter movement.
938153 PD 22 Service Water Pump Description of Problem - Strainer delta pressure is disconnected at Strainer strainer.
Action Taken to Correct Delta pressure sensor has been reconnected.
938682 PD SSPS Train B Description of Problem - Replace cracked diode on TLB607B.
Action Taken to Correct - Replaced broken diode.
Page 18 of 23
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 938674 PD 21RH18, Valve Description of Problem - Valve does not makeup closed light on console.
Action Taken to Correct - Replaced allen set screw on closed light arm.
941709 PD Steam Dump Description of Problem - Valves are opening with a "C" demand on the controller.
Action Taken to Correct - Calibrated IP-8372 and IP-8373.
941723 PD 23 Accumulator Description of Problem - Two level indication channels disagree by 10%.
Action Taken to Correct - Calibrated 2LT935C and 2LT934.
941724 PD 2SA3, Shutdown Rod Description of Problem - Check and repair, rod will not withdraw from reactor core.
Action Taken to C.rrect - Cable connector plug defective. Pin 3 had become disloaded from its mounting recess. Push pin back in place and cleaned all contacts.
941726 PD Pressurizer Pressure Ch. 1 Description of Problem - Check, repair, calibrate pressurizer pressure and Ch. 3 channels 1 and 3.
Action Taken to Correct - Recalibrated 2PT-455.
941875 PD 245W58, Valve Descrip+:on of Problem - Will not show close light in Control Room.
Action Taken to Correct - Adjusted shut limit switch stem to make up limit switch contacts.
941926 PD 24 Fan Coil Unit Description of Problem - Service water flow does not indicate when in high speed / low flow.
Action Taken to Correct - PS-1636Z ana PL-9622 were overranged causing 24SW57 to be shut.
941927 PD Shutdown Bank Step Counter-Description of Problem - Counter stopped at 148 steps and stuck at that Bank B position.
Action Taken to Correct - Replace fuse af movable main feed box.
942375 PD Simpson 260 Multimeter Description of Problem - Perform annual calibration of nine Simpson 260 multimeters M-172 thru M-180.
Action Tase n to Correct - Calibrated multimeters.
Page 19 of 23 I
+
WORK ORDER EXPLANATION OF WORK PERPORMED NUMBER DEPT EQUIPMENT IDENTIFICATION 942395 PD IIeise Gauge Description of Problem - Calibrate 0-500 PSI Heise Gauge to be used on lift check of 2RH3.
Action Taken to Correct - Calibrated gauge.
I
'l 945580 PD Reactor Coolant System Description of Problem - When presure Ch. 1 is selected for automatic control - demand signal goes to zero calling for full heaters. Channel indicates normal pressure.
Action Taken to Correct - Replaced PX455AA control switching relay.
945588 PD 22 Service Water Pump Description of Problem - Motor upper bearing leaks oil almost as fast as it can be added.
Action Taken to Correct - Cleaned motor, returned oil to proper level.
i 945589 PD 22 Service Water Screen Description of Problem - Will not operate in auto or start.
Action Taken to Correct - Opened valve 22SW14.
4 i
945598 PD 21 Service Water Header Description of Problem - Check and recalibrate PS-2747 transmitter, pressure indicates high.
Action Taken to Correct - Replaced printed circuit assembly and on/off toggle switch for power supply.
d 945820 PD 21MS18 Description of Problem - Valve will not open.
Action Taken to Correct - Replaced valve diaphragm.
i 946957 PD 21MLl69 Description of Problem - Support Maintenance with valve.
Action Taken to Correct - Check spring tension and verified valve is seated at 12 PSIG.
946993 PD Doric Description of Problem - Points 300-396 bad.
Action Taken to Correct - Points have been skipped.
l 1
946995 PD 22 Service Water Pump Description of Problem - Remove and reinstall pump thermocouples.
1 Action Taken to Correct - Performed above work.
i I
j Page 20 of 23
n-.
WORK ORDER NUMBER DEPT EQUIPMENT IDENTIFICATION EXPLANATION OF WORK PERFORMED 947001 PD 2N32, Instru.
Description of Problem - When perform functional test follow special instructions because high voltage does not shut off.
Action Taken to Correct - Remove high voltage cable, installed power fuses.
Performed functional procedure.
947007 PD 2N41, Instru.
Description of Problem - Upper and lower flux signals to protection system 2MV high.
Action Taken to Correct - Adjusted NM306 and NM307.
947055 PD 21 Feed Flow Channels 1 & 2 Description of Problem - Indicates high.
Action Taken to Correct - Equalized transmitter for zero indication, also calibrated 2FM510B.
947056 PD 22 Feed Flow Ch. 2 Description of Problem - Indicates high.
Action Taken to Correct - Equalized transmitter for zero indication.
947057 PD 24 Feed Flow Ch. 1-2 Description of Problem - Indicates high.
Action Taken to Correct - Equalized transmitter for zero indication.
947058 PD Steam Dump Description of Problem - Valves open as soon as system is armed.
Action Taken to Correct - Repaired feedback linkage.
947107 PD 2PR2, Valve Description of Problem - Remove limit switches and install hand sender to assist Maintenance Department.
Action Taken to Correct - Connected hand sender, also adjusted valve stroke, set lift pressure and limit switches.
947110 PD 2 Steam Flew Tranmitters Description of Problem - Verify transmitter line-ups.
l Action Taken to Correct - Rezeroed steam flow transmitters.
947120 PD N42, Power Range Description of Problem - Correct instrumentation for out of tolerance data.
Action Taken to Correct - Adjusted R34, NR42, R34, NR45, gain on Na304, NR47, signal isolator on OM202A.
Page 21 of 23
_.m._
i i
WORK ORDER NUMBER __
DEPT EQUIPMENT IDENTIFICATION L*3PLANATION OF WORK PERFORMED 947228 PD 21SJ102, Valve Description of Problem - Valve does not make open on closed. indications i
illuminate.
j Action Taken to Cotrect - Found limit switch actuator arm twisted, tightened loose bolt on actuator.
j 947340 PD Turbine Trip Circuitry
. Description of Problem - Install jumpers. This will cause a turbine latch Modification simulation.
4 Action Taken to Correct - Installed and removed jumpers.
e 947423 PD 23 Aux Feed Pump Description of Problem - Can't control speed, speed goes to max.
Action Taken to Correct - Calibrated pressure gauge, adjusted speed control linkage.
948088 PD M-133, Multimeter Description of Problem - Perform three month calibration.
{
Action Taken to Correct - Performed calibration.
i l
i i
4 l
i 4
Page 22 of 23
t REFUELING INFORMATION
'e l
DOCKET NO.:
50-311 UNIT:
Salem #2 DATE:
July 10, 1981 COMPLETED BY:
L. K. Miller TELEPHONE:
609-365-7000 X507 MONTH:
June 1981 1.
Refueling information has changed from last month:
YES NO X
2.
Scheduled date of next refueling:
January 8, 1983 3.
Scheduled date for restart following refueling:
April 3, 1983 4.
A.
Will Technical Specification changes or other license amendments be required?
YES NO NOT DETERMINED TO-DATE April 1981 B.
Has the reload fuel design been reviewed by the Station Operating Review Committee?
YES NO X
If no, when is it scheduled?
December 1982 5.
Scheduled date(s) for submitting proposed licensing action:
December 1982 (If Reauired) 6.
Important licensing considerations associated with refueling:
NONE 7.
Number of Fuel Assemblies:
193 A.
In-Core 0
B.
In Spent Fuel Storage 1170 8.
Present licensed spent fuel storage capacity:
1170 Future spent fuel storage capacity:
9.
Date of last refueling that can be discharged to the spent fuel pool assuming the present licensed capacity:
March 2000 Page 20 of 2 3 8-1-7.R4
.