ML18082B205
| ML18082B205 | |
| Person / Time | |
|---|---|
| Site: | Salem  |
| Issue date: | 09/08/1980 |
| From: | Mittl R Public Service Enterprise Group |
| To: | Miraglia F Office of Nuclear Reactor Regulation |
| References | |
| NUDOCS 8009190527 | |
| Download: ML18082B205 (5) | |
Text
Public Service Electric and Gas Company 80 Park Place Newark, N.J. 07101 Phone 201/430-7000 September 8~ 1980 Director of Nuclear Reactor Regulation U.S. Nuclear Regulatory Commission Washington, D.C.
20555 Attention:
Mr. Frank J. Miraglia, Chief Licensing Branch 3 Division of Licensing Gentlemen:
UPDATED Q LIST NO. 2 UNIT SALEM NUCLEAR GENERATING STATION DOCKET NO. 50-311 PSE&G hereby subrni ts,* in the enclosure to this letter, an updated "Q List".
This list has been updated in response to your verbal request and supersedes the Q List submitted by letter dated August 25, 1980.
Should you have any questions in this regard, do not hesitate to contact us.
Enclosure CC:
Mr. Leif Norrholm Salem Resident Inspector DQ13 The Energy People 8 0 0 9 1 g. 0 5:J.1 Very truly yours~
pv R. L. Mittl General Manager -
Licensing and Environment Engineering and Construction 95-0942
Q LIST -
OPERATIONS PHASE The listing below identifies those safety-related struc-tures, systems and components to which the operational Quality Assurance (OPQA) Program applies, as described in FSAR Appendix D, Section D.5.2.
The OPQA Program will be applied to these items through the' operations phase.
Not all of these items were designed and constructed under the QA program and will not be backfitted in this regard.
Those items that were designed and constructed under the QA program are so identified eliewhere in the FSAR.
Structures
- 1.
Containment (including penetrations, concrete shielding, interior structures, air locks, equipment hatch)
- 2.
Fuel Handling Building
- 3.
Auxiliary Building (including Control Room and Diesel Generator Area).
- 4.
Service Water Intake Structure Systems and Components
- 1.
- 2.
Reactor (including vessel, supports, intervals, fuel assemblies, RCC assemblies and drive mechanisms, sup-porting and positioning*members, and in-core instrumen-tation)
- 3.
Reactor Coolant System (including piping, valves, steam generators, pressurizer, safety and relief valves, block valves, piping to pressurizer relief tank, reactor coolant pumps, and supports)
- 4.
Engineered Safety Features A.
ECCS (including Safety Injection and RHR pumps, RWST, Accumulators, RHR Heat Exchangers, containment sump, sump screen, vortex suppression devices, and connecting piping and valves)
B.
Containment Spray System (including Spray pumps, spray headers, spray additive tank, connecting pip-ing and valves)
M P80 81 14/1 C.
Port.ions of the CVCS (including Centrifugal Charging pumps, Boron Injection Tank, connecting piping and valves).
D.
Containment Ventilation System (including fan coolers, distribution ducts, dampers, HEPA filters and moisture separators).
- 5.
Service Water System (entire system serving the nuclear portion of the plant, as shown in FSAR Figure 9.9-1)
- 6.
Auxiliary Building Ventilation System (supply and exhaust units)
- 7.
Fuel Handling Building Ventilation System (exhaust units)
- 8.
Auxiliary Feedwater Storage Tank
- 9.
Residual Heat Removal System
- 10.
Component Cooling System
- 11.
Fuel Transfer Tube
- 12.
Emergency Power Supply Systems A. Diesel Generators (including associated fuel oil, lub oil, starting auxiliary systems, fuel storage and day tanks, jacket cooling, govrnor, voltage, regulatory and excitation systems*)
B. Diesel Generator Area Ventilation System C. DC Power Supply System D. Power distribution lines to equipment required for emergency transformers and switchgear supplying En-gineered Safety Features (includes 4 kV, 460V and 230V vital buses).
E. Control Boards and Motor Control Centers F. Control equipment, facilities and lines required for above items M P80 81 14/2
- 13.
Waste Disposal Systems A. Gas Decay Systems B. Compressor
- 14.
Containment Polar Crane
- 15.
Auxiliary Feedwater System
- 16.
Sampling System (to outermost containment isolation valve)
- 17.
Main Steam System (to isolation valve)
- 18.
Feedwater System (to outermost isolation valve)
- 19.
Hydrogen Recombiners, hydrogen analyzers, and support~.
- 20.
Fuel Handling System
- 21.
Switchgear Room Ventilation System
- 22.
Steam Generator Blowdown System (to outermost.
containment isolation valve)
- 23.
Containment Pressure -
Vacuum Relief System
- 24.
Control Area Air Conditioning System
- 25.
Radiation Monitoring System (those portions required for Class I equipment and systems)
- 26.
Process Instrumentation and Controls (those portions required for Class I equipment and systems)
- 27.
Instrumentation and Control Systems required for safe shutdown (including safety related instrumentation)
- 28.
Electrical Cable Tunnels
- 29.
Control Panels -
Class IE circuits
- 30.
All systems which penetrate containment, up to and including the containment isolation valve {identified in FSAR Section 5.4)
M P80 81 14/3
- 31.
Instrument Air System (including accumulators, interconnecting piping and valves) for air-operated valves that perform a safety function.
- 32.
Safety Related equipment identified in FSAR Table Q7.18-l (response to Question 7.18)
- 33.
Spent Fuel Pool Cooling System
- 34.
Meteorological Data Collection Program
- 35.
- 36.
Leakage Detection System (as discussed in FSAR Section 4.2.7.).
- 37.
Missile Barriers (protecting safety-related equipment).
- 38.
Shoreline Dike (for protection against excessive wave action) *
- 39.
Valve operators for all valves incorporated in this list.
- 40.
AC control power buses and inverters~
- 41.
Expendable and consumable items necessary for the func-tional performance of critical structures, systems and components (i.e., weld rod, boric acid, fuel oil, etc.).
- 42.
Nuclear Instrumentation System 9/9/80 M P80 81 14 1/4