ML17055B558

From kanterella
Jump to navigation Jump to search
Accepts Util 860331 Justification for Use of Compression Fittings in Instrument Tubing & Supports Program,Per NRC
ML17055B558
Person / Time
Site: Nine Mile Point Constellation icon.png
Issue date: 04/23/1986
From: Adensam E
Office of Nuclear Reactor Regulation
To: Hooten B
NIAGARA MOHAWK POWER CORP.
References
NUDOCS 8604300429
Download: ML17055B558 (4)


Text

April 23, 1986 Docket No. 50-410 Mr. B.

G. Hooten Executive Director of Nuclear Operations Niagara Mohawk Power Corporation 300 Frie Boulevard West

Syracuse, New York 13202

Dear Mr. Hooten:

DIST TION:

et o.

0-410 NRC PDR Local PDR BWD-3 r/f EAdensam EHylton MHaughey RBernero

Attorney, OELD JPartlow Ei)ordan BGrimes ACRS (10)

Subject:

Safety-Related Instrument Tubing and Supports Program for Nine Mile Point Nuclear Station, Unit 2 In our letters of October 5, 1983, and November 5, 1984, the staff approved a

safety-related instrument tubing and supports program for Nine Mile Point Unit 2 as described in those letters.

The general use of compression fittings was not part of the approved program.

Subsequently, in FSAR Amendment 22 the Niagara Mohawk modified the instrument tubing and supports program to include the use of compression fittings as a substitute for welded fittings, without providing information to justify their use.

In response to our letter of February 14,

1986, Niagara Mohawk in a letter dated March 31, 1986, provided information justifying the use of compression fittings.

The letter further indicated that the information will be incorporated into FSAR Table 3.9A-15 in Amendment 26 to the FSAR.

We have reviewed the Niagara Mohawk's justification for the use of compression fittings in the instrument tubing and supports program and we find it acceptable.

In addition to ASME Section III Code requirements, the letter indicated that steps are taken to assure that proper fit-up and installation prior to hydrotest is performed and documented.

Compliance with these requirements provides a

quality level that is commensurate with the importance of the instrument tubing and supports program and the safety functions of the attached fluid systems.

Sincerely, cc:

See next page

/S/

,S.

Elinor G. Adensam, Director BWR Project Directorate No.

3 Division of BWR Licensing BWD-~D MHaughey/hmc 4/z/86 Bb04300429 Bb0423 PDR ADOCK 05000410 A

PDR LA:BWD-3:DBL EHylton 4/

/86

-3:DBL EAdensam 4/p+6

N

~

W P

K p

I 'I W ~ It'I

" It IW I

I II, W

I t

I I

g P

(I, W

I

,I ~,

P ~

II f

W K

~

P, I

It I I

I I',

'I K

\\

  • I W

Pr Pt W

I W

W P

,'I

Mr. B. G. Hooten Niagara Mohawk Power Corporation

'\\ E Nine Mile Point Nuclear Station Unit 2 CC:

Mr. Troy B. Conner, Jr.,

Esq.

Conner 8 Wetterhahn Suite 1050 1747 Pennsylvania

Avenue, N.W.

Washington, D.C.

20006 Richard Goldsmith Syracuse University College of Law E. I. White Hall Campus

Syracuse, New York 12223 Ezra I. Bialik Assistant Attorney General Environmental Protection Bureau New York'State Department of Law 2 World Trade Center New York, New York 10047 Resident Inspector Nine Mile Point Nuclear Power Station P. 0.

Box 99

Lycoming, New York 13093 Mr. John W. Keib, Esq.

Niagara Mohawk Power Corporation 300 Erie Boulevard West

Syracuse, New York 13202 Mr. James Linville U. S. Nuclear Regulatory Commission Region I 631 Park Avenue King of Prussia, Pennsylvania 19406 Norman Rademacher, Licensing Niagara Mohawk Power Corporation 300 Erie Boulevard West
Syracuse, New York 13202 Regional Administrator, Region I U.S. Nuclear Regulatory Commission 631 Park Avenue King of Prussia, Pennsylvania 19406 Mr. Paul D. Eddy New York State Public Service Commission Nine Mile Point Nuclear Station-Unit II Post Office Box 63
Lycoming, New York 13093 Don Hill Niagara Mohawk Power Corporation Suite 550 4520 East West HighWay
Bethesda, Maryland 20814

4 res"