ML070860289
| ML070860289 | |
| Person / Time | |
|---|---|
| Site: | Davis Besse  |
| Issue date: | 03/15/2007 |
| From: | Ballinger R, Bullen D, Latanision R Altran Solutions Corp, Exponent Failure Analysis Associates, Exponent |
| To: | FirstEnergy Nuclear Operating Co, Office of Nuclear Reactor Regulation |
| Shared Package | |
| ML070860211 | List: |
| References | |
| FOIA/PA-2007-0299 | |
| Download: ML070860289 (44) | |
Text
Appendix F Ronald M. Latanision, Ph.D.
09/03 Ronald M. Latanision, Ph.D.
Principal and Practice Director Professional Profile Dr. Ronald M. Latanision is a Principal and Director of Exponents Mechanics and Materials practice. Prior to joining Exponent, he was the Director of The H.H. Uhlig Corrosion Laboratory in the Department of Materials Science and Engineering at M.I.T., and held joint faculty appointments in the Department of Materials Science and Engineering and in the Department of Nuclear Engineering. He is now an Emeritus Professor at MIT. In addition, he is a member of the National Academy of Engineering and a Fellow of ASM International, NACE International, and the American Academy of Arts and Sciences. From 1983-1988, Dr.
Latanision was the first holder of the Shell Distinguished Chair in Materials Science. He was a founder of Altran Materials Engineering Corporation, established in 1992, and led the Materials Processing Center at MIT as its Director from 1985 to 1991.
Dr. Latanision's research interests are focused largely in the areas of materials processing and in the corrosion of metals and other materials in aqueous (ambient as well as high temperature and pressure) environments. He specializes in corrosion science and engineering with particular emphasis on materials selection for contemporary and advanced engineering systems and in failure analysis. His expertise extends to electrochemical systems and processing technologies, ranging from fuel cells and batteries to supercritical water power generation and waste destruction. Dr. Latanisions research interests include stress corrosion cracking and hydrogen embrittlement of metals and alloys, water and ionic permeation through thin polymer films, photoelectrochemistry, and the study of aging phenomena/life prediction in engineering materials and systems. He speaks annually at MITs Reactor Technology Conference for Utility Executives. Dr. Latanision is a member of the International Corrosion Council and serves as Co-Editor-in-Chief of Corrosion Reviews.
Dr. Latanision has served as a science advisor to the U.S. House of Representatives Committee on Science and Technology in Washington, D.C. He has also served as a member of the Advisory Committee to the Massachusetts Office of Science and Technology, an executive branch office created to strengthen the Commonwealth's science and technology infrastructure with emphasis directed toward future economic growth. Dr. Latanision has served as a member of the National Materials Advisory Board of the National Research Council and now serves as a member of the NRCs Committee on Undergraduate Science Education. He hosts the annual Siemens Westinghouse Science and Technology Competition on the MIT campus. In June of 2002, Dr. Latanision was appointed by President George W. Bush to membership on the U.S.
Nuclear Waste Technical Review Board.
Credentials and Professional Honors Ph.D., Metallurgical Engineering, Ohio State University, 1968 B.S., Metallurgy, Pennsylvania State University, 1964
Ronald M. Latanision, Ph.D.
Page 2 09/03 2004 Henry B. Linford Award, Electrochemical Society; 2004 Best Paper of the Year in Metals and Materials International, Korean Institute for Metals and Machinery; 2001 T.P.
Hoar Award, British Institute of Corrosion; Fellow, American Academy of Arts and Sciences (1997); Centennial Fellow, College of Earth and Mineral Sciences, Pennsylvania State University (1996); NACE Fellow Award, NACE International (1995); Willis Rodney Whitney Award, NACE International (1994); Honorary Alumnus, Association of Alumni/Alumnae of MIT (1992); Distinguished Alumnus, The Ohio State University (1991); Visiting Professor, University of Naples, Italy (1989); President, Alpha Sigma Mu (1989); Fellow, ASM International (1988); David Ford McFarland Award, The Pennsylvania State University (1986);
MemberNational Academy of Engineering (1985); Henry Krumb Lecturer, AIME (1984);
Shell Distinguished Professor of Materials Science (19831988); Case-Western Reserve Centennial Scholar (1980); Senior U.S. Scientist Award for Research and Teaching, the Alexander von Humboldt Foundation; Federal Republic of Germany (1974), Tenure (June 1974June 1975); A.B. Campbell Young Authors Award for 1972, National Association of Corrosion Engineers; National Academy of Sciences-National Research Council Postdoctoral Fellowship Award; National Bureau of Standards (19681969); N.A.S.A. Traineeship, Ohio State University (19641968);Bayard D. Kunkle Award, Pennsylvania State University (1963 1964); Alcoa Foundation Scholarship, Pennsylvania State University (19621964); American Society for Metals Foundation for Education Scholarship, Pennsylvania State University (1961 1962); Mineral Industries Scholarship, Pennsylvania State University (19601961); Election to various Honorary Fraternities including Phi Eta Sigma, Tau Beta Pi, Sigma Tau, Phi Kappa Phi, Sigma Gamma Epsilon, Alpha Sigma Mu.
Publications Corrosion in Supercritical WaterWaste Destruction Environments, ASM Handbook, Vol. 13B, Corrosion: Materials, Environments and Industries, ASM International, Metals Park, OH, in press (with D.B. Mitton).
Influence of Chromizing Treatment on the Corrosion Behavior of AISI 316 Stainless Steel in Supercritical Water Oxidation, Metals and Materials International, Vol. 10, No.1, p. 83, 2004 (with H.S. Kim, J.H. Yoon, J.H. Han, D.B. Mitton, and Y.S. Kim). KIMM Best Paper of 2004.
Do All RPV Head Penetration Leaks Have the Potential to Cause Head Wastage? Proceedings of ICONE-12, 2004 (with C. Roy, J. Fessler, J. Foulds, and D. Taylor).
Hot Corrosion in Gas Turbine Components, Engineering Failure Analysis, Vol.9, p31, 2002 (with N. Eliaz, and G. Shemesh).
The Applicability of EIS for Assessing Substrate Metal Mass Loss for Polymer-Coated Metals, Proceedings, 2002 Tri-Service Corrosion Conference, 2002 (with D.B. Mitton, S.L.
Wallace, N.J. Cantini, N. Eliaz, F. Bellucci, and G.E. Thompson).
Ronald M. Latanision, Ph.D.
Page 3 09/03 An Examination of Degradation Modes of Constructional Materials for Supercritical Water Oxidation System Fabrication, Proceedings, 2002 Tri-Service Corrosion Conference, 2002 (with D.B. Mitton, H. Kim, and J. Zhang).
An Examination of the Corrosion Phenomena of Potential Constructional Materials for SCWO System Fabrication, Paper 353, Corrosion 02, 2002 (with D.B. Mitton, H. Kim, J. Zhang, N.
Eliaz, and C.R. Sydnor).
The Correlation Between Substrate Mass Loss and Electrochemical Impedance Spectroscopy Data for a Polymer-Coated Metal, J. Electrochem. Soc., 2002 (with D.B. Mitton, S. Wallace, N. Cantini, F. Bellucci, G.E. Thompson, N. Eliaz and R.M. Latanision, D.B. Mitton, H. Kim, J.
Zhang, N. Eliaz, and C.R. Sydnor).
Aerospace Gerontology: Retained Austenite as an Aging Mechanism in Duplex Bearings, Materials Technology/Advanced Performance Materials, Vol. 16, p. 36, 2001 (with G. Leisk, P.J. Wender, D.B. Mitton, and C.V. Trainor).
Corrosion Behavior of Advanced Ti-Based Alloys Made by Three-Dimensional Printing (3DP') for Biomedical Applications, Corrosion Science, Vol. 43, p. 1781, 2001 (with S-B.
Hong, N. Eliaz, E.M. Sachs, and S.M. Allen). T.P. Hoar Prize of the Institute of Corrosion (UK)
A New Ti-5Ag Alloy for Customized Prostheses by Three Dimensional Printing, Journal of Dental Research, Vol. 80, No. 3, p. 860, 2001 (with S-B. Hong, N. Eliaz, G. Leisk, E.M. Sachs, and S.M. Allen).
An Overview of the Current Understanding of Corrosion in SCWO Systems for the Destruction of Hazardous Waste Products, Materials Technology/Advanced Performance Materials, Vol. 16, p. 44, 2001 (with D.B. Mitton, N. Eliaz, and J.A. Cline).
The Use of EIS and VSM for Measuring the Corrosion Rate of Polymer-Coated Ferromagnetic Metals, Materials Technology/Advanced Performance Materials, Vol. 16, p. 90, 2001 (with N. Eliaz, D.B. Mitton, N.J. Cantini, G. Leisk, S.L. Wallace, F. Bellucci, and G.E. Thompson).
The Corrosion Behavior of Nickel-Base Alloys in SCWO Systems, Ind. Eng. Chem.
Research, Vol. 39, p. 4689, 2000 (with D.B. Mitton, J.H. Yoon, J.A. Cline, H.S. Kim, and N. Eliaz).
Corrosion Resistance of Stainless Steels in Chloride Containing SCWO Systems, Korean Journal of Chemical Engineering, Vol. 17, p. 58, 2000 (with Y.S. Kim and D.B. Mitton).
In-Situ Underfilm Corrosion Rate Measurement by Magnetic and Electrochemical Techniques, Electrochemical and Solid State Letters, Vol. 3, No. 6, p. 275, 2000 (with N.J.
Cantini, D.B. Mitton, N. Eliaz, G. Leisk, S.L. Wallace, F. Bellucci, and G.E. Thompson).
Ronald M. Latanision, Ph.D.
Page 4 09/03 An Overview of Corrosion Phenomena in SCWO Systems for Hazardous Waste Destruction, Zairyo-to-Kankyo (Corrosion Engineering), Japan Society of Corrosion Engineering, Vol. 49, No. 3, 2000 (with D.B. Mitton and J.H. Yoon).
Electrochemical Migration Tests of Solder Alloys in Pure Water, Corrosion Science, Vol. 39, pp. 14151430, 1997 (with T. Takemoto, T.W. Eagar, and A. Matsunawa).
The Potential for Unanticipated Biodegradation During EIS Analysis of Polymer-Coated Metallic Substrates, Electrochemica Acta, Vol. 42, p. 1859, 1997 (with D.B. Mitton, T.E. Ford, E. LaPointe, F. Bellucci, and R. Mitchell).
Desulfurization of Ni-Based Superalloys by Combined Heating and Glow Discharge, Scripta Materialia, Vol. 34, p. 1315, 1996 (with R.A. Outlaw, S. Rezaie-Serej, and W.P. Allen).
The Effect of Post-Cure Annealing on the Protective Properties of Polyimides on Chromium Substrates, Journal of the Electrochemical Society, Vol. 143, p. 3307, 1996 (with D.B. Mitton and F. Bellucci).
Interpretation of the Rationale for feed Modification in SCWO Systems, Journal of the Electrochemical Society, Vol. 143, No. 3, p. L59, 1996 (with D.B. Mitton and P.A. Marrone).
Corrosion of Rapidly Solidified Neodymium-Iron-Boron (Nd-Fe B) Permanent Magnets and Protection via Sacrificial Zinc Coatings, Materials Science and Engineering, Vol. A198,
- p. 125, 1995 (with S.A. Attanasio).
Corrosion Science, Corrosion Engineering and Advanced Technologies, Corrosion, Vol. 51,
- p. 270, 1995.
Education Reform and the Public Will, American Education: Still Separate, Still Unequal, Daedalus, Vol. 124, No. 4, p. 143, 1995.
The Effect of Aging on the Diffusivity of Hydrogen in Amorphous Ni-Si-B Alloys, Corrosion Science, Vol. 37, No. 6, p. 865, 1995 (with Hara).
The Role of Universities in K-12 Education, American Academy of Arts and Sciences, June 1995 (with W. Damon).
An X-ray Photoelectron Spectroscopy Study of Chromium Metalloid Alloys-III, Electrochem Acta, Vol. 40, p. 1723, 1995 (with T.P. Moffat and R.R. Ruf).
Corrosion of Metal Matrix Composites, International Materials Review, Vol. 39, No. 6,
- p. 245, 1994 (with L.H. Hihara).
Transport and Dielectric Properties Of Poly(ethyleneterephthalate) as Determined via Electrochemical Techniques, Journal of Applied Polymer Science, Vol. 48, pp. 21972205, 1993 (with M.J. Kloppers, F. Bellucci, and J.E. Brennan).
Ronald M. Latanision, Ph.D.
Page 5 09/03 Morphological Aspects of Anodic Dissolution, Phys. Review., Vol. B. 47, p. 11749, 1993 (with M.G. Fernandes and P.C. Searson).
Corrosion Behavior of A Steel Surface Laser-Alloyed with Chromium Borides, Journal of Materials Science, Vol. 27, p. 3014, 1992 (with Y. Zuo).
Electrochemistry of Chromium-Metalloid Alloys in Sulfuric AcidII, Journal of the Electrochemical Society, Vol. 139, p. 1013, 1992 (with T.P. Moffat).
Electronic Properties and Defect Structure of Fe and Fe-Cr Passive Films, Corrosion, Vol. 48,
- p. 229, 1992 (with M.J. Kloppers and F. Bellucci).
Environment-Induced Cracking of Two Ni-Base Amorphous Alloys in Acid Chloride Solutions, Materials Science and Engineering, Vol. A159, p. 87, 1992 (with Y. Zuo).
Galvanic Corrosion of Aluminum-Matrix Composites, Corrosion, Vol. 48, p. 546, 1992 (with H. Hihara).
A Study of Corrosion Initiation on Polyimide Coatings, Corrosion Science, Vol. 33, p. 1203, 1992 (with F. Bellucci, L. Nicodemo, T. Monetta, and M.J. Kloppers).
Acid Corrosion Inhibition of Nickel by 2-(Triphenyl Phosphoranylidene) Succinic Anhydride, Corrosion, Vol. 47, p. 667, 1991 (with E. Khamis and F. Bellucci).
Corrosion Engineering in Device Packaging, Mat. Res. Soc. Symp. Proc., Vol. 203, p. 87, 1991 (with P.V. Nagarkar, M.J. Kloppers, and F. Bellucci).
Grain Boundary Diffusion of Hydrogen in Nickel, Met. Trans. Vol. 22A, p. 351, 1991 (with T.M. Harris).
Localized Corrosion Induced in Graphite/Aluminum Metal-Matrix Composites by Residual Microstructural Chloride, Corrosion, Vol. 47, p. 335, 1991 (with L.H. Hihara).
Na+ and Cl-Transport Across Polyimide Films, Journal of Applied Polymer Sciences, Vol.
42, p. 1567, 1991 (with A. Schussler, F. Bellucci, and S.D. Senturia).
Production and Characterization of Extremely Corrosion Resistant Chromium-Metalloid Alloys, Journal of the Electrochemical Society, Vol. 138, p. 3280, 1991 (T.P. Moffat).
Protective Properties of Polyimide (PMDA-ODA) on Aluminum Metallic Substrates, Journal of the Electrochemical Society, Vol. 138, p. 40, 1991 (with F. Bellucci and M.J. Kloppers).
The Effect of Composition on the Performance of Epoxy Paints, Journal of Materials Science, Vol. 25, p. 1097, 1990 (with F. Bellucci and L. Nicodemo).
Ronald M. Latanision, Ph.D.
Page 6 09/03 The Effect of Porous Coating Processing on the Corrosion Behavior of Cast Co-Cr-Mo Surgical Implant Alloys, Journal of Orthopaedic Research, Vol. 8, p. 874, 1990 (with J. Jacobs, R.M. Rose, and S.J. Veeck).
Moisture Affecting Electrical Conductivity in Kapton Polyimide, Journal of the Electrochemical Society, Vol. 137, p. 1778, 1990 (with F. Bellucci, E. Khamis, and A. Schussler).
A Photoelectrochemical Study of The Passive Film on Chromium, Electrochemica Acta, Vol. 35, p. 445, 1990 (with P.C. Searson).
Residual Microstructural Chloride in Graphite-Aluminum Metal Matrix Composites, Materials Science and Engineering, Vol. A126, p. 231, 1990 (with L.H. Hihara).
Comments on Detection of Hydrogen Permeation on the Microscopic Scale in Nickel, Scripta Metallurgica, Vol. 23, p. 1027, 1989 (with T.M. Harris).
The Effect of Density of States, Work Function and Exchange Integral of Polycrystalline and Single Crystal Surfaces on the Hydrogen Evolution Reaction, International Journal of Hydrogen Energy, Vol. 14, p. 131, 1989 (with P.C. Searson and P.V. Nagarkar).
Investigation of Hydride Formation and Decomposition in Palladium Using the Electrochemical Permeation Technique, International Journal of Hydrogen Energy, Vol. 14,
- p. 683, 1989 (with T. Harris).
Analysis of the Photoelectrochemical Response of the Passive film on Iron in Neutral Solutions, Journal of the Electrochemical Society, Vol. 135, p. 1358, 1988 (with P.C. Searson and U. Stimming).
Cathodic Overprotection of Silicon Carbide/6061-T6 and Graphite/6061-T6 Aluminum Alloy Metal Matrix Composites, Scripta Metallurgica, Vol. 22, pp. 413418, 1988 (with L.H.
Hihara).
Electrochemistry of Chromium-base Binary Metallic Glasses, Materials Science and Engineering, Vol. 99, p. 525, 1988 (with T.P. Moffat and R.R. Ruf).
Experimental Study of Hydrogen Transport During Plastic Deformation in Iron, Met. Trans.,
Vol. 19A, p. 2789, 1988 (with M. Hashimoto).
Physical Metallurgy of Nickel-Base Alloys as It Relates to Corrosion, Mater. Eng., Vol. 10, pp. 143162, 1988.
The Role of Dislocations During Transport of Hydrogen in Hydrogen Embrittlement of Iron, Met. Trans., Vol. 19A, p. 2799, 1988 (with M. Hashimoto).
Ronald M. Latanision, Ph.D.
Page 7 09/03 Theoretical Study of Hydrogen Transport During Plastic Deformation in Iron, Acta Metallurgica, Vol. 36, p. 1837, 1988 (with M. Hashimoto).
Aqueous Corrosion Resistance, Journal of Metals, Vol. 39, No. 12, p. 20, 1987 (with A.J.
Sedriks).
The Effect of Phosphorus on the Corrosion of Glassy Copper Zirconium Alloys, Corrosion, Vol. 43, p. 471, 1987 (with T.D. Burleigh).
Effects of Grain Boundary Segregation and Precipitation on the Hydrogen Susceptibility of Nickel, Met. Trans., Vol. 18A, p. 1653, 1987 (with T.S.F. Lee).
Hydrogen Permeation Behavior in Polycrystalline Nickel Implanted with Helium, Argon, Nickel, Yttrium and Platinum, Materials Science and Engineering, Vol. 90, p. 243, 1987 (with R. Nishimura and E.K. Hubler).
The Use of Photocurrents to Characterize Anodic Films on Ti, Zr, Cu, and 304 Stainless Steel, Journal of the Electrochemical Society, Vol. 134, p. 135, 1987 (with T.D. Burleigh).
A Comparison of the General and Localized Corrosion Resistance of Conventional and Rapidly Solidified A1S1 303 Stainless Steel, Corrosion, Vol. 42, p. 161, 1986 (with P.C.
Searson).
The Corrosion Performance of Microcrystalline, Titanium-Modified 316 Stainless Steel, Corrosion Science, Vol. 26, No. 8, p. 629, 1986 (with N. Saito and P.C. Searson).
Corrosion Resistance of Metastable Alloys Processed by Rapid Solidification, Amorphous Metals and Semiconductors, Acta-Scripta Metallurgica Proceedings Series, Vol. 3, p. 413, 1986.
Effect of Hydrogen on the Easy Glide Extent in Single Crystal Nickel, Scripta Metallurgica, Vol. 20, p. 681, 1986 (with G.S. Frankel).
Hydrogen Transport During Deformation in Nickel: Part I. Polycrystalline Nickel, Met.
Trans, Vol. 17A, p. 861, 1986 (with S. Frankel).
Hydrogen Transport During Deformation in Nickel: Part II. Single Crystal Nickel, Met.
Trans, Vol. 17A, p. 869, 1986 (with S. Frankel).
The Chemistry of Fracture-A Basis for Analysis, Acta Metallurgica, Vol. 33, p. 1769, 1985 (with M.E. Eberhart and K.H. Johnson).
Corrosion and Oxidation Resistance of Iron-and Aluminum-Based Powder Metallurgy Alloys, Corrosion Science, Vol. 25, p. 947, 1985 (with P.C. Searson).
The Stress Corrosion Cracking of a Glassy Fe32Ni36Cr14P12B6 Alloy, Corrosion, Vol. 41,
- p. 369, 1985 (with R.F. Sandenbergh).
Ronald M. Latanision, Ph.D.
Page 8 09/03 The Anodic Polarization Behavior of Fe-Ni-P-B and Fe-Ni-Cr-P-B Amorphous Alloys, Corrosion, Vol. 40, pp. 619624, 1984 (with N.R. Sorensen and F.J. Hunkeler).
A Molecular Orbital Model of Intergranular Embrittlement, Acta Metallurgica, Vol. 32, pp. 955959, 1984 (with M.E. Eberhart and K.H. Johnson).
Hydrogen Permeability and Diffusivity in Nickel and Ni-Base Alloys, Corrosion, Vol. 39, pp. 174181, 1983 (with M. Kurkela).
The Influence of Structure on the Corrosion of Glassy Copper-Zirconium Alloys, Corrosion, Vol. 39, pp. 271279, 1983 (with J.C. Turn, Jr.).
Grain Boundary Transport of Hydrogen in Nickel, Scripta Metallurgica, Vol. 16, pp. 575 578, 1982 (with T. Tsuru).
Mineralized Biological Tissues Studied by Auger Electron and X-Ray Photoelectron Spectroscopy, Microbeam Analysis, Vol. J-3, pp. 121127, 1982 (with W.J. Landis, M.D.
Grynpas, and J.R. Martin).
The Corrosion Resistance of Microcrystalline Stainless Steel, Journal of the Electrochemical Society, Vol. 129, pp. 14021408, 1982 (with T. Tsuru).
Effect of Joule Heating in Electrochemical Measurement of Hydrogen Transport, Scripta Metallurgica, Vol. 16, pp. 10971100, 1982 (with G.S. Frankel).
Concerning Electrochemical Measurements of Hydrogen Permeation in Metals, Scripta Metallurgica, Vol. 15, 11571161, 1981 (with M. Kurkela).
The Fatigue Crack Growth Behavior of Inconel 600 at Cathodic Potentials, Met. Trans.,
Vol. 12A, pp. 14091418, 1981 (with G.S. Was, H. Tischner, and R.M.N. Pelloux).
The Influence of Thermal Treatment on the Chemistry and Structure of Grain Boundaries in Inconel 600, Met. Trans., Vol. 12A, pp. 13571409, 1981 (with G.S. Was and H. Tischner).
The Effect of Plastic Deformation on the Transport of Hydrogen in Nickel, Scripta Metallurgica, Vol. 13, pp. 927932, 1979 (with M. Kurkela).
On the Embrittlement of Aluminum Alloys by Cathodic Hydrogen: The Role of Surface Films, Met. Trans., Vol. 9A, pp. 597599, 1978 (with T.F. Klimowicz).
Modification of the Strength of Solids by Chemisorption, Critical Reviews in Solid State and Materials Sciences, Vol. II, pp. 317331, 1978 (with K.F. Beckham).
Ronald M. Latanision, Ph.D.
Page 9 09/03 The Influence of Surface Charge Density on the Fracture of Zinc Single Crystal Electrodes, Scripta Metallurgica, Vol. 12, pp. 475479, 1978 (with H. Opperhauser, Jr. and A.R.C.
Westwood).
Surface-and Environment Sensitive Mechanical Behavior, The Physics Teacher, Part I:
Vol. 14, No. 3, p. 135; Part II: Vol. 14, No. 4, p. 220, 1976 (with N.H. Macmillan).
Surface Effects in Crystal Plasticity, Journal of Colloid and Interface Science, Vol. 6, pp. 267312, 1976.
What We Would Like to Know About Surface and Environmental Effects in Deformation, Materials Science and Engineering, Vol. 25, pp. 225231, 1976 (with A.R.C. Westwood).
Further Observations on the Effect of Grain Boundary Segregation in the Hydrogen Embrittlement of Nickel, Met. Trans., Vol. 6A, 233234, 1975 (with H. Opperhauser, Jr.).
Further Observations on the Environment-Sensitive Hardness and Machinability of Alumina, Journal of the American Ceramics Society, Vol. 58, p. 372, 1975 (with M.V. Swain and A.R.C.
Westwood).
The Intergranular Embrittlement of Nickel by Hydrogen: The Effect of Grain Boundary Segregation, Met. Trans., Vol. 5, pp. 483492, 1974 (with H. Opperhauser).
Electromechanical MachiningA New Metal Cutting Technique Under Study at Martin Marietta Laboratories, Modern Machine Shop Magazine, Vol. 46, No. 9, pp. 6976, 1974 (with K.C. Nielsen, and R. Kirschbaum).
Factors Controlling the Corrosion Behavior of Titanium and Titanium-Nickel Alloys in Saline Solutions, Corrosion, Vol. 29, 386392, 1973 (with J.A.S. Green).
On the Surface Physics of Metal Electrodes, Corrosion Science, Vol. 13, pp. 387393, 1973 (with N.H. Macmillan, and R.G. Lye).
Passivation of Nickel Monocrystal Surfaces, Corrosion, Vol. 27, pp. 509515, 1971 (with H. Opperhauser).
The Temperature Dependence of Stacking Fault Energy in Fe-Cr-Ni Alloys, Met. Trans.,
Vol. 2, pp. 505509, 1971 (with A.W. Ruff, Jr.).
Adsorption Sensitive Anelastic Effects in Glass, Phys. Stat. Sol. Vol. A, pp. K17K20, 1970 (with R.C. Westwood and R.G. Lye).
On the Anisotropy Observed in the Passivation of Ni Monocrystals, Journal of the Electrochemical Society, Vol. 117, pp. 902903, 1970 (with C.J. Mauvais and A.W. Ruff, Jr.).
Ronald M. Latanision, Ph.D.
Page 10 09/03 Extrinsic-Intrinsic Fault Pairs in an Fe-Cr-Ni Alloy, Journal of Applied Physics, Vol. 40, pp. 27162720, 1969 (with A.W. Ruff, Jr.).
On the Dislocation Distribution Near the Surface of Lightly Deformed Copper Single Crystals, Scripta Metallurgica, Vol. 3, pp. 465469, 1969.
Plastic Deformation of Electrochemically Polarized Nickel Single Crystals, Acta Metallurgica, Vol. 17, pp. 307319, 1969 (with R.W. Staehle).
Effect of Continuous Hydrogenation on the Deformation of Nickel Single Crystals, Scripta Metallurgica, Vol. 2, pp. 667672, 1968 (with R.W. Staehle).
Presentations and Published Abstracts The Applicability of EIS for Assessing Substrate Metal Mass Loss for Polymer-Coated Metals, Proc. 2002 Tri-Service Corrosion Conference, San Antonio, TX, January 1418, 2002 (with D.B. Mitton, S.L. Wallace, N.J. Cantini, N. Eliaz, F. Bellucci, and G.E. Thompson).
An Examination of the Corrosion Phenomena of Potential Constructional Materials for SCWO System Fabrication, Paper 353, Corrosion 02, Denver, CO, April 712, 2002 (with D.B.
Mitton, H. Kim, J. Zhang, N. Eliaz, and C.R. Sydnor).
An Examination of Degradation Modes of Constructional Materials for Supercritical Water Oxidation System Fabrication, Proc. 2002 Tri-Service Corrosion Conference, San Antonio, TX, January 1418, 2002 (with D.B. Mitton, H. Kim, and J. Zhang).
Assessing Degradation Mechanisms in Supercritical Water Oxidation Systems, Paper 352, Corrosion 01, Houston, TX, March 1116, 2001 (with D.B. Mitton, J.H. Yoon, N. Eliaz, and J.A. Cline).
Corrosion Mechanisms in N10276 in Hydrothermal HCI Solutions, Paper 362, Corrosion 01, Houston, TX, March 1116, 2001 (with J.A. Cline, P.A. Marrone, J.W. Tester, and D.B.
Mitton).
Stress Corrosion Cracking in Supercritical Water Systems for Waste Destruction, Chemistry and Electrochemistry of Stress Corrosion Crashing: A Symposium Honoring R.W. Staehle,
- p. 597, 2001 (with D.B. Mitton and N. Eliaz).
The Corrosion Behavior of Nickel-Base Alloys in SCWO Systems, Proc. 5th International Symposium on Supercritical Fluids, Atlanta, GA, April 812, 2000 (with D.B. Mitton, J.H.
Yoon, J.A. Cline, H.S. Kim, and N. Eliaz).
Stress Corrosion Cracking in Supercritical Water Systems, Proc. 1st International Symposium on Supercritical Water-Cooled Reactors, Design and Technology (SCR-2000), Tokyo, Japan, November 69, 2000 (with D.B. Mitton).
Ronald M. Latanision, Ph.D.
Page 11 09/03 Aluminizing and Boroaluminizing Surface Modifications of Mar-M247 and Their Effects on Hot Corrosion Resistance in Na2SO4-NaCl Molten Salt, Abstract 1729, 196th Electrochemical Society Meeting, Honolulu, HI, 1999 (with J-H. Yoon, T.W. Kim, J.H. Lee, H.S. Kim, G.G.
Leisk, and D.B. Mitton).
Application of Practical Aging Management Concepts to Corrosion Engineering, Plenary Lecture, 14th International Corrosion Congress, Cape Town, South Africa, September 26 October 1, 1999 (with G.G. Leisk, W.J. McBrine, T. Esselman, O.J. Van Der Schijff and P.J.
Wender).
Corrosion Considerations for Employing SCWO During Hazardous Waste Destruction, Proc.
1st International Symposium on SCWO Technology, Changwon, Korea, December 15, 1999 (with D.B. Mitton, J-H. Yoon, and J.A. Cline).
Corrosion of SCWO Constructional Materials in Cl Containing Environments, Paper 257, Symposium on Corrosion in Supercritical ProcessesCorrosion 99, 1999 (with D.B. Mitton, Y.S. Kim, J.H. Yoon, and S. Take).
Effect of Pre-Sputtering on Nitride Layer Formation in Ion Nitriding of STS 304 Stainless Steel, Abstract 1297, 196th Electrochemical Society Meeting, Honolulu, HI, 1999 (with J-H.
Yoon, M.S. Son, G.W. Lee, H.S. Kim, G.G. Leisk, and D.B. Mitton).
Evaluation of Corrosion Resistance of Metal Evaporated Tape by Electrochemical Measurements, Proc. 196th Meeting of The Electrochemical Society, Honolulu, HI, October 1722, 1999 (with S. Take, M. Okuyama, S. Yuditskaya, and D.B. Mitton).
Biodegradation of Polyimide-Coated Chromium Substrates, Symposium on Corrosion Control by Coatings (ACS Symposium 689), p. 211, ACS, Washington, DC, 1998 (with D.B. Mitton, S.
Toshima, S.S. Chang, F. Bellucci, T.E. Ford, J-O. Gu, and R. Mitchell).
Corrosion Engineering of Supercritical Water Oxidation Systems for Chemical Waste Destruction, Corrosion in Advanced Materials and Systems, p. 129, NACE, Houston, TX, 1998 (with D.B. Mitton, S.H. Zhang, J.A. Cline, M.S. Quintana, N. Caputy and P.A. Marrone).
Corrosion Mitigation in SCWO Systems for Hazardous Waste Disposal, Paper 414, Symposium on Corrosion in Supercritical Fluids, Corrosion 98, 1998 (with D.B. Mitton, S.H.
Zhang, M.S. Quintana, J.A. Cline, N. Caputy, and P.A. Marrone).
Evaluation of Hot Corrosion Resistance of Alloys Under Molten Sulfate Film by Electrochemical Techniques, Paper 294, 194th Electrochemical Society Meeting, Boston, MA, 1998 (with S. Take, S. Maruyama, M. Okuyama, and D.B. Mitton).
Evaluation of Retained Austenite as an Aging Mechanism in a Duplex Bearing, Proc. 24th Joint Service Data Exchange, Anaheim, CA, 1998 (with G.G. Leisk and D.B. Mitton).
Ronald M. Latanision, Ph.D.
Page 12 09/03 An Investigation of the Degradation of Nickel Alloys in Supercritical Water Oxidation Systems, Paper 1014, Symposium on Electrochemistry in Unusual Media and Under Unusual Conditions, 193rd Electrochemical Society Meeting, San Diego, CA, 1998 (with D.B. Mitton, M.S. Quintana, J.A. Cline, and N. Caputy).
The Role of Nitrogen and Molybdenum in the Corrosion of Stainless Steels, Paper 236, 194th Electrochemical Society Meeting, Boston, MA, 1998 (with Y.S. Kim, Y.S. Park, and B. Mitton).
A Study of the Wet Etching Behavior of CoNbZr/Cu/CoNbZr Multi-Layer Films Formed by RF Magnetron Sputtering, 194th Electrochemical Society Meeting, Boston, MA, 1998 (with J-H. Yoon, J-S. Song, B. Mitton, and H-S. Kim).
Effects of Pre-heating on the Electrochemical Impedance and Microstructure of An As-Cast Co-Cr-Mo Alloy, Proc. Symposium on Passivity and Breakdown, Electrochemical Society, Pennington, 1997 (with Montero-Ocampo).
Evaluating Stress Corrosion in Supercritical Water Oxidation Systems for the Destruction of Hazardous Waste, Paper No. 203, Corrosion 97, NACE, Houston, TX, 1997 (with D.B.
Mitton, S-H. Zhang, K.E. Hautanen, J.A. Cline, and E-H.J. Han).
Corrosion Mechanisms in Supercritical Water Oxidation Systems for Hazardous Waste Destruction, Proc. 1997 Tri-Service Conference on Corrosion, 1997 (with D.B. Mitton, S-H.
Zhang, J.A. Cline, M.S. Quintana, and N. Caputy).
Degradation in Supercritical Water Oxidation Systems, ACS Symposium series, Supercritical Fluids: Extraction and Pollution Prevention, (M.A. Abraham and A.K. Sunol, eds.), p. 242, American Chemical Society, Washington, DC, 1997 (with D.B. Mitton, E.-H. Han, S.-H.
Zhang, and K.E. Hautanen).
Evaluation Method for Electrochemical Migration Susceptibility in Pure Water, Microjoining and Assembly Technology in Electronics (Japan Welding Society), 1997 (with T. Takemoto, T.W. Eagar, and A. Matsunawa).
A Greenfield for Corrosion Engineering, Keynote address given at Intercorr 961st Global Internet Corrosion Conference, 1996.
Corrosion in Supercritical Water Oxidation Systems, Physical Chemistry of Aqueous SystemsMeeting the Needs of Industry, Proc 12th Intl. Conference on the Properties of Water and Steam, Begell House, New York, p. 638, 1995 (with D.B. Mitton and J.C. Orzalli).
Corrosion Phenomena Associated with Supercritical Fluids, 3rd International Symposium on Supercritical Fluids; Vol. 3, p. 43, 1995 (with D.B. Mitton and J.C. Orzalli).
Corrosion Studies in Supercritical Water Oxidation Systems, Innovations in Supercritical Fluids: Science and Technology, ACS Symposium Series, Vol. 608, p. 327, 1995 (with D.B.
Mitton and J.C. Orzalli).
Ronald M. Latanision, Ph.D.
Page 13 09/03 Effect of Alloy Additions on the Electronic Properties of Passive Films on Ti and Fe: A Photoelectrochemical Investigation, Proc. H.H. Uhlig Memorial Symposium, Electrochemical Society Monograph Series, 94-26, p. 127, 1995 (with H. Ezaki and G. Berera).
Lifetime Prediction for Polymide Metal Structures Immersed in 0.5 MNaCl, 3rd International Symposium on Corrosion and Reliability of Electronic Materials and Devices, Electrochemical Society, Monograph Series, 1995 (with Nenov).
Improving the Corrosion Resistance of Polyimide Coated Metallic Substrates, Proc. 2nd Intl.
Symposium on Corrosion and Reliability of Electronic Materials and Devices, Toronto, Canada, The Electrochemical Society, 1993 (with E.K. Tan, D.B. Mitton, P.V. Nagarkar, and F.
Bellucci).
Supercritical Water Oxidation for Wastes Cleanup: Enabling Research for Practical Applications,First International Conference on Solvo-Thermo Reactors, paper 5-6, p. 1, 1995 (with W.A. Peters, P. Griffith, J.G. Harris, H.J. Herzog, J.B. Howard, K.A. Smith, and J.W.
Tester).
Transport and Protective Properties of Polyimides as Studied via Electrochemical Impedance Spectroscopy, Advances in Polyimide Science and Technology, Proc. 4th Intl. Conference on Polyimides, Technomic Publishing Co., Ellenville, NY, 1993 (with D.B. Mitton, F. Bellucci, E.K. Tan, and P.V. Nagarkar).
A Materials and Processing Agenda for the 1990s, Presentation to the Federation of Materials Societies Biennial Meeting on Developing a Vision for Materials Processing in the 1990s: The Role of National Policy, FMS, Washington, DC, 1991 (with G.B. Kenney and T.J. Allen).
Education in AmericaA Need for Stewardship, Keynote address presented before the MIT Alumni Leadership Conference, Cambridge, MA, September 15, 1990.
Hydrogen Embrittlement of Two Nickel Base Amophous Alloys in Acidic Chloride Solution, Corrosion Control -- 7th APCCC, Vol. 1, pp. 475480, 1991 (with Y. Zuo).
Transport and Protective Properties of Polyimides As Studied Via Electrochemical Impedance Spectroscopy, Fourth International Conference on Polymides, p. 169, 1991 (with E.K. Tan, D.B. Mitton, F. Bellucci, and P.V. Nagarkar).
The Effect of Thickness on the Electrical Conductivity of Kapton Polyimide, 11th International Corrosion Conference, Vol. 2, p. 215222, 1990 (with F. Belluci and E. Khamis).
Corrosion Engineering in the Packaging of Electronic, Magnetic, and Optical Devices, International Symposium on Corrosion Science and Engineering (in honor of Marcel Pourbaixs 85th Birthday) (R.A. Rapp, N.A. Gokcen, A. Pourbaix, eds.), CEBELCOR, Vol. 2, p. 491, 1989 (with F. Bellucci, E. Khamis, P.V. Nagarkar, P.C. Searson, A. Schussler, and S.D. Senturia).
Ronald M. Latanision, Ph.D.
Page 14 09/03 Electrochemical and Transport Properties of Polyimide, Proc. 2nd International Symposium on ULSI Science and Technology, The Electrochemical Society, Los Angeles, CA, May 712, 1989, (with F. Bellucci, A. Schussler, and P.V. Nagarkar).
Interfacial Interactions Affecting Polyimide Reliability, 39th Electronic Components Conference, p. 160, IEEE, 1989 (with P.V. Nagarkar, P.C. Searson, F. Bellucci, and M.G.
Allen).
The Passive State of Chromium, Proc. Symposium on Transient Techniques in Corrosion Science and Engineering (W. Smyrl, D.D. MacDonald, and W.J. Lorenz, eds.), p. 202, Electrochemical Society, Pennington, NJ, 1989 (with T.P. Moffat).
Electrochemistry of Cr-and Ni-Base Binary Metallic Glasses, Proc. 10th International Congress on Metallic Corrosion, p. 597, Oxford and IBH Publishing, New Delhi, 1987 (with P.V. Nagarkar, T.P. Moffat, and P.C. Searson).
Current and Projected Impact of Corrosion Science and Engineering, 33rd Sagamore Army Materials Research Conference, July 28August 1, 1986, Materials Performance, Vol. 26, No. 10, p. 9, 1987.
Physical Metallurgy of Nickel-Base Alloys as It Relates to Corrosion, Proc. International Conference on The Corrosion of Nickel-Base Alloys, pp. 13, ASM, 1985.
The Effect of Phosphorus on the Corrosion Resistance of Rapidly Quenched Alloys, Proc. 5th International Conference on Rapidly Quenched Metals, pp. 14571464, 1985 (with T.D.
Burleigh and E.R.C. Johns).
Corrosion Behavior of Rapidly Solidified Fe-Ti-P Alloys With Cu, Cr, and B Additions, Proc.
Materials Research Society 1983 Annual Meeting, pp. 219225, North Holland, 1984 (with R. Shastry and H.E. Townsend).
Corrosion Resistance of Microcrystalline Aluminum Alloys, Proc. 9th International Congress on Metallic Corrosion, Vol. 3, pp. 122129, 1984.
The Effect of Phosphorus on the Corrosion and Photocorrosion of Glassy Copper-Zirconium Alloys, Proc. 9th International Congress on Metallic Corrosion, Vol. 2, pp. 645648, 1984 (with T.D. Burleigh).
The Effect of Phosphorus on the Corrosion Resistance of Glassy Copper-Zirconium Alloys, Proc. Materials Research Society 1983 Annual Meeting, pp. 227231, North Holland, 1984 (with T.D. Burleigh).
The Effect of Rapid Quenching on Microstructure and Passivity in Iron-Titanium Alloys, Proc. 9th International Congress on Metallic Corrosion, Vol. 1, pp. 228233, 1984 (with C.
Johns and J.B. Vander Sande).
Ronald M. Latanision, Ph.D.
Page 15 09/03 Fatigue Crack Growth of Inconel Alloy X-750 in Simulated BWR Environments, Proc. 9th International Congress on Metallic Corrosion, Vol. 3, pp. 310316, 1984 (with K. Sheeks and R.G. Ballinger).
Hydrogen Permeation and Embrittlement Studies on Metallic Glasses, Alexander R. Troiano Honorary Symposium on Hydrogen Embrittlement and Stress Corrosion Cracking, pp. 297 313, ASM, Metals Park, 1984 (with C.R. Compeau and M. Kurkela).
Hydrogen Transport During Plastic Deformation, Proc. 9th International Congress on Metallic Corrosion, Vol. 4, pp. 427436, 1984 (with M. Hashimoto).
The Interaction of Hydrogen Permeation and Deformation in Poly-and Single Crystal Nickel, Proc. 9th International Congress on Metallic Corrosion, Vol. 4, pp. 466472, 1984 (with S. Frankel).
A Study of Localized Corrosion in Aluminum Using the Scanning Potential Microprobe, Proc. 9th International Congress on Metallic Corrosion, Vol. 4, pp. 191197, 1984 (with N.D.
Kackley).
A Study of the Thermal Aging Behavior of Alloy-600, Proc. 9th International Congress on Metallic Corrosion, Vol. 3, pp. 265273, 1984 (with R.G. Ballinger, W.C. Moshier and K.N.
Siebein).
Corrosion of Aluminum in Salt Water and Seawater as Influenced by Magnesium and Copper, Corrosion 83, NACE, Houston, 1983 (with S.W. Smith and N.D. Kackley).
Corrosion Resistance of Rapidly Quenched Alloys, Proc. Symposium on the Chem. and Phys.
of Rapidly-Solidified Materials, pp. 153171, TMS, 1983 (with A. Saito, R. Sandenbergh, and S.-X. Zhang).
Fatigue Crack Growth in Alloys X-750 and 600 in Simulated PWR and BWR Environments, International Symposium on Environmental Degradation of Materials in Nuclear Power Systems, pp. 702, Electric Power Research Institute, 1983 (with S. Sheeks, W.C. Moshier, R.G.
Ballinger, and R.M.N. Pelloux).
The Corrosion Resistance of Microcrystalline Alloys, Proc. 4th International Conference on Rapidly Quenched Metals, pp. 14371442, 1982 (with T. Tsuru and S.X. Zhang).
The Role of Uncertainty in the Measurement of Crack Length by Compliance Techniques, International Conference on Subcritical Crack Growth, pp. 261285, Freiberg, Germany, 1981 (with R.G. Ballinger, C. Moshier, and R.M.N. Pelloux).
Synergistic Effects of Thermal Treatment and Cathodic Polarization on the Fatigue Crack Growth Behavior of Inconel 600, Proc. 8th International Congress on Metallic Corrosion, pp. 400405, DECHEMA, Frankfurt, 1981 (with G.S. Was).
Ronald M. Latanision, Ph.D.
Page 16 09/03 The Corrosion Resistance of Microcrystalline Stainless Steels, Corrosion and Corrosion Protection (Uhlig Symposium), pp. 238248, Electrochemical Society, 1981 (with T. Tsuru).
The Redistribution of Cathodic Activity on an Aluminum Surface in Seawater upon the Introduction of Copper Ions, Corrosion 81, NACE, Houston, TX, 1981 (with S.W. Smith, Jr.).
The Corrosion Resistance of Glassy Metals, Proc. Third International Conference on Mechanical Behavior of Metals, Vol. 2, pp. 475483, Pergamon Press, Toronto, 1979 (with J.C.
Turn, Jr., and C.R. Compeau).
Stress Corrosion Cracking and Hydrogen Embrittlement: Differences and Similarities, Proc.
Symposium on Environment Sensitive Fracture of Engineering Materials, pp. 4870, TMS-AIME, Warrendale, 1979 (with O.H. Gastine and C.R. Compeau).
Mechanisms of Corrosion of Glassy Copper Zirconium Alloys, Proc. Seventh International Congress on Metallic Corrosion, Vol. 1, pp. 279288, 1978 (with J.C. Turn, Jr.).
Surface Effects in Crystal Plasticity: General Overview, Proc. NATO Advanced Study Institute on Surface Effects in Crystal Plasticity, pp. 347, Noordhoff International Publishing Co., Leyden, Holland, 1977.
The Influence of Surface Charge Density on the Plasticity and Fracture of Zinc Monocrystal Electrodes, Proc. 4th International Conference on the Strength of Metals and Alloys, Vol. 2, pp. 903904, 1976 (with H. Opperhauser, Jr., and A.R.C. Westwood).
Surface-and Environment-Sensitive Mechanical BehaviorSome Current Issues, Proc. 4th International Conference on the Strength of Metals and Alloys, Vol. 3, pp. 10921121, 1976 (with R.C. Westwood).
Electrocapillarity and the Microhardness of Zinc Monocrystal Electrodes, Proc. 5th International Congress on Metallic Corrosion, pp. 111114, NACE, Houston, TX, 1974 (with H. Opperhauser, Jr., and A.R.C. Westwood).
Electrochemical Techniques in the Study of Embrittlement Phenomena, Presented at Symposium on Electrochemical Techniques Applied to Corrosion Problems, Corrosion 74, NACE, Houston, TX, 1974 (with J.A.S. Green).
Environment-Sensitive Hardness and Machinability of Alumina, Proc. NSF-Hard Materials Workshop, Lehigh University, July 1974 (with M.V. Swain and A.R.C. Westwood).
The Chemical and Physical Nature of Surfaces, Proc. International Conference on Surface Technology, pp. 122, Society of Manufacturing Engineers,
Dearborn,
1973.
Intergranular Cracking of Pure Nickel Electrodes at Cathodic Potentials, Proc. Third International Conference on the Strength of Metals and Alloys: The Microstructure and Design
Ronald M. Latanision, Ph.D.
Page 17 09/03 of Alloys, Vol. 1, pp. 472476, The Institute of Metals and Iron and Steel Institute, 1973 (with H. Opperhauser, Jr.).
The Influence of Applied Potential on the Microhardness of Zinc Monocrystal Electrodes: The Electrocapillary Effect, Proc. International Conference on the Science of Hardness Testing and Its Research Applications, pp. 432439, A.S.M., Metals Park, 1973 (with H. Opperhauser and A.R.C. Westwood).
Comments on Adsorption-Sensitive Cracking, Proc. Conference on the Environmental Degradation of Stressed Materials, pp. 62103, A.R.P.A., Woods Hole, MA, July 1971 (with R.C. Westwood).
Surface-Sensitive Mechanical Behavior of Nickel Monocrystals, Proc. Second International Conference on the Strength of Metals and Alloys, pp. 446450, A.S.M., Metals Park, 1970.
Stress-Corrosion Cracking of Iron-Nickel-Chromium Alloys, Proc. Conference on Fundamental Aspects of Stress-Corrosion Cracking, pp. 214307, NACE, Houston, TX, 1969 (with R.W. Staehle).
Reports Latanision, R.M., and R.W. Shaw. 1993. Corrosion in supercritical water oxidation systems.
MIT EL-93 006.
Book Chapters Diffusion of Hydrogen in Titanium, Hydrogen Effects in Materials A.W. Thompson and N.R.
Moody, eds.), TMS, p. 205, 1996 (with O.S. Abdul-Hamid).
Corrosion Studies in Supercritical Water Oxidation Systems, Innovations in Supercritical Fluid Science and Technology, ACS Symposium Series, Vol. 608, p. 327, ACS, Washington, DC, 1995 (with D.B. Mitton and J.C. Orzalli).
Corrosion of Graphite Aluminum Metal Matrix Composites, Environmental Effects on Advanced Materials, p. 267282, TMS, Warrendale, 1991 (with M.A. Buonanno, L.H. Hihara and J.F. Chiang)
The Effect of Aluminum Carbide Formation in Graphite Fiber/1100 and 6061 Aluminum Metal Matrix Composites, Parkins Symposium on Fundamental Aspects of Stress Corrosion Cracking, TMS, Warrendale, 1991 (with M.A. Buonanno, T. Schmitt, and P. Werner).
Electrochemistry of Metallic Glasses, Modern Aspects of Electrochemistry, (R.E. White, J.O.M. Bockris, and B.E. Conway, eds.), pp. 121161, Plenum Press, New York, NY, 1990 (with P.C. Searson and P.V. Nagarkar).
Ronald M. Latanision, Ph.D.
Page 18 09/03 Hydrogen Effects on Materials Behavior (A.W. Thompson and N.R. Moody, eds.), p. 133, TMS, Warrendale, 1990 (with T.M. Harris).
Localized Corrosion of Graphite Fiber/6061-T6 Aluminum Alloy Metal Matrix Composites in Aerated and Deaerated Sodium Sulfate Solutions, Space Age Metals Technology, (F.H. Froes and Ray A. Cull, eds.), Vol. 2, p.213, SAMPE, Covina, CA, 1988 (with L.H. Hihara).
Developments in Advanced Materials in the Industrialized Countries, Advanced Manufacturing, Materials and International Competitiveness, p. 21. Federation of Materials Societies, Washington, DC, 1988.
The Electrochemical Behaviour of 80Ni-20P Glassy Alloy in Acidic Sulphate Solutions, Corrosion, Electrochemistry and Catalysis of Metallic Glasses, R.B. Diegle and K. Hashimoto (eds.), pp. 118133, The Electrochemical Society, Pennington, 1988 (with P.V. Nagarkar and P.C. Searson).
The Electrochemistry of Chromium, Chromium-Boron and Chromium-Phosphorus Alloys, Corrosion, Electrochemistry and Catalysis of Metallic Glasses (R.B. Diegle and K. Hashimoto, eds.), pp. 25°40, The Electrochemical Society, Pennington, 1988 (with T.P. Moffat and R.R.
Ruf).
Hydrogen Permeation behavior of P-, B-, and Bi-Implanted Nickel with Amorphous Alloy Layers, Corrosion, Electrochemistry and Catalysis of Metallic Glasses (R.B. Diegle and K.
Hashimoto, eds.), pp. 277288, The Electrochemical Society, Pennington, 1988 (with R.
Nishimura and G.K. Hubler).
Chemical Properties of Metastable Crystalline and Glassy Alloys, in Electrochemistry and Solid State Science Education (W.H. Smyrl, ed.), p. 184, Electrochemical Soc., Pennington, NJ, 1987 (with P.C. Searson).
The Role of Hydrogen Transport in Hydrogen Embrittlement, Chemistry and Physics of Fracture (R.M. Latanision and R.H. Jones, eds.), p. 505. Martinus-Nijhoff, Holland, 1987 (with M. Hashimoto).
An Electrochemical and XPS Investigation of Sputter Deposited Ni44Fe32Cr11P8B5 on 304 Stainless Steel, Science and Technology of Rapidly Quenched Alloys (N. Tenhover, W.L.
Johnson, L.E. Tanner, eds.), p. 157, Materials Research Society, Boston, MA, 1987 (with P.V.
Nagarkar).
Photoelectrochemical Studies of the Passive Film on Iron in Neutral Solutions, Surfaces, Inhibition, and Passivation (E. McCafferty and R.J. Brodd, eds.), p. 175, The Electrochemical Society, Princeton, NJ, 1986 (with P.C. Searson and U. Stimming).
Corrosion Resistance of Stainless Steels Processed by Rapid Solidification Technology, New Developments in Stainless Steel Technology, p. 7. ASM, 1985 (with P.C. Searson).
Ronald M. Latanision, Ph.D.
Page 19 09/03 The Electrochemistry and Solid State Chemistry of Intergranular Hydrogen Embrittlement, Modeling Environmental Effects on Crack Growth Processes (R.H. Jones, W.W. Gerberich, eds.), p. 125, The Metallurgical Society of AIME, 1985 (with M.E. Eberhart).
The Effect of Phosphorus on the Corrosion Resistance of Amorphous Copper-Zirconium Alloys, Passivity of Metals and Semiconductors, pp. 321326, Elsevier, Amsterdam, 1983 (with T.D. Burleigh).
NATO Advanced Research Institute on Atomistics of Fracture, pp. 338, Plenum Press, New York, NY, 1983.
The Corrosion Resistance of Glassy Alloys, Corrosion: Treatise on Materials Science and Technology, Vol. 23, pp. 59102, Academic Press, New York, NY, 1983 (with R.B. Diegle, N.R. Sorensen, and T. Tsuru).
The Effect of Ordering on the Hydrogen Embrittlement Susceptibility of Ni2CR, Hydrogen Effects in Metals, pp. 411418, TMS AIME, Warrendale, 1981 (with J. Berkowitz and M.
Kurkela).
The Role of Grain Boundary Chemistry and the Environment on Intergranular Fracture, Hydrogen Effects in Metals, pp. 379395, TMS-AIME, Warrendale, 1981 (with M. Kurkela and F. Lee).
Surface Effects in Crystal Plasticity, Fundamentals of Tribology, pp. 255294, MIT Press, 1980.
Intergranular Embrittlement of Ni by Cathodically Produced Hydrogen, Hydrogen in Metals, pp. 539544, ASM, Metals Park, 1974 (with H. Opperhauser, Jr.).
Surface Sensitive Mechanical Behavior of Metals, Structure and Properties of Metal Surfaces, pp. 500538, The Honda Memorial Series of Materials Science, No. 1, Maruzen Co.
Ltd., Tokyo, 1973 (with A.J. Sedriks and A.R.C. Westwood).
Characterization of Metal Surfaces, Corrosion Fatigue, pp. 185200, NACE, Houston, TX, 1972.
Adsorption-Sensitive Machining Behavior of Glass, Amorphous Materials, pp. 533543, John Wiley, London, 1972 (with R.C. Westwood and G.H. Parr, Jr.).
Environment-Sensitive Machining Behavior of Nonmetals, in The Science of Ceramic Machining and Surface Finishing, pp. 141155, NBS Spec. Pub. 348, 1972 (with R.C.
Westwood).
Adsorption-Induced Embrittlement by Liquid Metals, Corrosion by Liquid Metals, pp. 405 415, Plenum Press, New York, NY, 1970 (with R.C. Westwood).
Ronald M. Latanision, Ph.D.
Page 20 09/03 Surface-and Environment-Sensitive Mechanical Behavior, Advances in Corrosion Science and Technology, Vol. I, pp. 51145, Plenum Press, New York, NY, 1970 (with A.R.C.
Westwood).
Books Edited Corrosion in Advanced Materials and Systems, NACE, Houston, TX, 1998 (with D.B. Mitton).
Development and Environmental Characteristics of New Materials, special issue of Materials Science and Engineering, A198, 1995 (with K. Hashimoto).
The H.H. Uhlig Memorial Symposium, Electrochemical Society Monograph Series, 94-26, 1995 (with F. Mansfeld, A. Asphahani, and H. Bohni).
Advances in the Mechanics and Physics of Surface, Vol. 3, Harwood Academic Publishers, New York, NY, 1986 (with T.E. Fischer).
Advances in the Mechanics and Physics of Surfaces, Vol. 2, Harwood Academic Publishers, New York, NY, 1983 (with T.E. Fischer).
Atomistics of Fracture, Plenum Press, New York, NY, 1983 (with J.R. Pickens).
Advances in the Mechanics and Physics of Surfaces, Vol. 1, Harwood Academic Publishers, New York, NY, 1981 (with R. Courtel).
Surface Effects in Crystal Plasticity, Noordhoff International Publishing Company, Leyden, The Netherlands, 1977 (with J.T. Fourie).
Chemistry and Physics of Fracture, Martinus-Nijhoff, Holland, 1987 (with R.H. Jones).
Patents Method and Apparatus for Increasing Charging and Discharging Efficiency in Batteries, U.S.
Patent Office, No. 5,614,332; March 25, 1997 (with R. Pavelle and P. Burstein).
Apparatus for Increasing Catalytic Efficiency, U.S. Patent Office, No. 5,501,846; March 26, 1996 (With R. Pavelle, P. Burnstein, and L. Farber).
Pharmaceutical Capsule and Method of Making, U.S. Patent Office, No. 5,228,573; July 20, 1993 (with R. Pavelle and P. Burstein).
Machining Method: Electromechanical Machining of Metals and Alloys, U.S. Patent Office, No. 3,873,512; March 25, 1975.
Ronald M. Latanision, Ph.D.
Page 21 09/03 Lectures Preventative Maintenance and Failure Analysis of Aircraft Components, First World Congress on Corrosion in the Military, Sorrento, Italy, June 8, 2005.
Corrosion Assisted Cracking of Metallic Materials in SCWO, Engineering Degradation of Engineering Materials, Bordeaux, France, July 1, 2003.
The Mechanisms of Corrosion: The Effects of Fabrication, Exposure and Interaction with Other Materials, Intl Conf. on 20th Century Exterior Architectural Metals, MIT. April 5, 2003.
Materials Issues in Supercritical Water Oxidation of Chemical Wastes, Sauveur Lecture, Boston Chapter of TMS International, November 15, 2001.
Considering Materials Challenges During SCWO Systems Design, ONR Workshop on Supercritical Water OxidationAchievements and Challenges in Commercial Applications, August 14, 2001.
Progress in Understanding Corrosion in Supercritical Water Waste Treatment Systems, Corrosion 2001, Houston, TX, March 12, 2001.
Stress Corrosion Cracking in Supercritical Water Systems for Waste Destruction, Symposium Honoring the Contribution of Roger Staehle, TMS International, New Orleans, LA, February 16, 2001.
Stress Corrosion Cracking in Supercritical Water Oxidation Systems for Waste Destruction, Symposium Honoring the Contribution of Roger W. Staehle, TMS International, New Orleans, LA, February 14, 2001.
Corrosion of Constructional Materials in SCWO Reactors, IHI Headquarters, Tokyo, Japan, November 9, 2000.
Corrosion Engineering Issues in Supercritical Water Reactors, First International Symposium on Supercritical Water Reactors, Tokyo, Japan, November 7, 2000.
Materials Issues in Supercritical Water Oxidation of Chemical Wastes Materials, Department of Materials Science and Engineering Seminar Series, University of Florida, October 2, 2000.
Aging Management Concepts to Corrosion Engineering, Tri-Services Corrosion Symposium, Myrtle Beach, November 17, 1999.
Lets Get Serious About Teacher Education, Tri-Services Corrosion Symposium, Myrtle Beach, November 17, 1999.
Supercritical Water Oxidation of Chemical Wastes Materials Science Seminar, University of Virginia, November 12, 1999.
Ronald M. Latanision, Ph.D.
Page 22 09/03 Plenary Lecture: Application of Practical Aging Management Concepts to Corrosion Engineering, 14th International Congress, Cape Town, South Africa, September 28, 1999.
Teaching Solid State Chemistry at MIT, New England Association of Chemistry Teachers, Cambridge, MA, August 9, 1999.
Corrosion Mitigation in SCWO Systems for Hazardous Waste Destruction, Chemical Engineering Seminar Series, University of Rhode Island, March 4, 1999.
Corrosion Research Beyond the Year 2000, Gordon Conference on Corrosion, New London, NH, July 9, 1998.
Corrosion in Advanced Engineering Systems, Materials Department ETH-Zurich, May 28, 1998.
Metals in Advanced Engineering Systems, McFarland Award Golden Anniversary Symposium, The Pennsylvania State University, April 24, 1998.
Corrosion Engineering of SCWO Systems for Chemical Waste Destruction, TRS CORROSION/98, San Diego, CA, March 24, 1998.
Corrosion Mechanisms in Supercritical Water Oxidation Systems for Hazardous Waste Disposal, Tri-Service Conference on Corrosion, Wrightsville Beach, November 19, 1997.
Corrosion in Supercritical Water Systems for Chemical Waste Destruction, New England Section of the Electrochemical Society, Boston, MA, September 30, 1997.
Corrosion and Corrosion Mechanisms in Supercritical Water Oxidation Systems for Hazardous Waste Disposal, Toyota Higarshifiji Technical Center, Shizuokon, Japan, May 16, 1997.
Corrosion and Corrosion Mechanisms in Supercritical Water Oxidation Systems for Hazardous Waste Disposal, Asaki Chemical Corporate R&D, Kawasaki, Japan, May 15, 1997.
Corrosion and Corrosion Mechanisms in Supercritical Water Oxidation Systems for Hazardous Waste Disposal, 4th Intl. Symposium on Supercritical Fluids, Sendai, Japan, May 14, 1997 What Do Students Need to Know for Physical Science and Engineering, Massachusetts Association of Science Supervisors, Marlboro, MA, May 8, 1997.
How Can Schools of Science, Math and Education Work Together to Prepare Teachers for the Next Century, Massachusetts Department of Education, Marlboro, MA, April 18, 1997.
Corrosion of Nickel Base Alloys in Supercritical Water Oxidation Systems, Corrosion 97 (Task Group T-5A-40), New Orleans, LA, March 12, 1997.
An Assessment of Corrosion and Failure Mechanisms in Supercritical Water Oxidation Systems, 13th International Corrosion Congress, Melbourne, Australia, November 27, 1996.
Ronald M. Latanision, Ph.D.
Page 23 09/03 Corrosion of Materials in Supercritical Water Oxidation Systems for Waste Destruction, Japan Corrosion Society, Hiroshima, Japan, November 19, 1996.
Corrosion Related Issues in Device Packaging, Department of Materials Science and Engineering, Kyushu Institute of Technology, Kitakqushu City, Japan, November 14, 1996.
Photoelectrochemistry of Passive Films, Institute of Materials Research, Tohoku University, Sendai, Japan, November 13, 1996.
Corrosion of Materials in Supercritical Water Oxidation Systems for Chemical Waste Destruction, Conference on Energy and The Environment, Institute for Materials Research, Tohoku University, Sendai, Japan, November 11, 1996.
Corrosion Issues and Materials Selection in Supercritical Water Oxidation Systems, Toshiba Heavy Apparatus Engineering Laboratory, Yokohama, Japan, November 7, 1996.
Corrosion of Materials in Supercritical Water Oxidation Systems for Chemical Waste Destruction, Tokyo Institute of Technology, November 6, 1996.
Corrosion of Materials in Supercritical Water Oxidation Systems, JGC Corporation Oarai Nuclear Research Center, Mito, Japan, November 5, 1996.
Photoelectrochemical Characterization of Surfaces, JIM/TMS Joint Meeting, Honolulu, HI December 14, 1995.
New England Science Teachers, Woburn Public Schools Awards Ceremony, Woburn, MA, June 12, 1995.
Keynote Address, Cape Cod Academic All Star Award Banquet, Hyannis, MA, June 8, 1995.
Science Literacy in America, NSTA National Convention, Philadelphia, PA, March 25, 1995.
A Photoelectrochemical Investigation of the Effect of Alloying Additions on the Electronic Properties of Passive Titanium, TMS Symposium on Localized Dissolution and Corrosion, Rosemont, IL, October 6, 1994 (by G. Berera).
K-12 Education Reform: Public Will vs. Political Will, Plenary Lecture, MIT Parents Weekend, October 15, 1994.
MITs Programs in K-12 Education, Massachusetts Board of Library Commissioners, Boston, MA, July 29, 1994.
Corrosion Science, Corrosion Engineering and Advanced Technologies, Industrial Technology Research Institute, Materials Research Laboratories, Chutung, Hsinchu, Taiwan, July 11, 1994.
Ronald M. Latanision, Ph.D.
Page 24 09/03 Current Research Activities in Corrosion and Corrosion Resistant Materials, Taipower Company Seminar, Taipei, Taiwan July 9, 1994.
Current Research in New Corrosion Resistant Materials Korean Electric Power Corporation Research Center, Taejeon, Korea, July 7, 1994.
Corrosion Resistance of Rapidly Solidified Nd-Fe-B Permanent Magnets, U.S.Japan Symposium on Development and Environmental Characteristics of New Materials, Mt. Hood, OR, June 7, 1994.
K-12 Education Reform: Political Will vs. Public Will, MIT Club of Southeastern Massachusetts, New Bedford, MA, April 24, 1994.
The Chemical Properties of Advanced Materials, Joint NACE/ASM Meeting, Baltimore/
Washington Sections, Baltimore, MD, April 5, 1994.
Education Reform: Public Will vs. Political Will, Friends of the Snow Library, Orleans, MA, March 27, 1994.
Corrosion Science, Corrosion Engineering and Advanced Technologies, Willis R. Whitney Award Lecture, NACE International Corrosion 94, Baltimore, MD, March 1, 1994.
Advances in Corrosion Science and Engineering, Plenary Lecture, 6th Middle East Corrosion Conference, Bahrain, January 24, 1994.
Your Child: Educated for Tomorrow? Community Education Alliance, South Shore Lecture Series, Norwell, MA, November 9, 1993.
K-12 Educational Reform: Political Will vs. Public Will, Sigma Xi Dinner Meeting, GTE Laboratories, November 3, 1993.
Educational System Reform, MIT Club of New York, Princeton Club, October 19, 1993.
Corrosion of Materials of Construction in Supercritical Water Oxidation Systems, ARO/URI Project Review Meeting, University of Delaware, August 17, 1993.
Programming Schools for the Year 2000: A Systems Approach, Designing New American Schools, MIT Department of Architecture Symposium, April 24, 1993.
Corrosion Engineering, Peoria Chapter of ASM, Peoria, IL, April 21, 1993.
MIT Programs in K-12 Education, MIT Club of South Texas, Houston, TX, April 19, 1993.
A Call to Arms for American K-12 Education, Engineering Council of Houston, Houston, TX, April 20, 1993.
Ronald M. Latanision, Ph.D.
Page 25 09/03 Crisis in American K-12 Education: What Can be Done About It? MIT Club of New Haven, February 16 1993.
Restructing Teacher EducationWill It Make a Difference, Keynote Address, Project CONNSTRUCT, Connecticut Academy for Science, Cromwell, CT, January 22, 1993.
MITs Initiative in K12 Education, ASM Fellows Night, Cambridge, MA, December 5, 1992.
MIT and K-12 Education, MIT Alumni Club of Northeast Ohio, Cleveland, OH, November 18, 1992.
American K-12 Education: The Role of the Research Universities, NTU Materials Science Program, North Carolina State University, Raleigh, NC, November 11, 1992.
MIT and K-12 Education, MIT Club of Boston, MA, November 4, 1992.
MIT and K-12 Education, MIT Club of Portland, ME, October 27, 1992.
The State of American K-12 Education, Gordon Conference on Corrosion Banquet Address, July 23, 1992.
Crisis in American K-12 Education: What Can Be Done About It? Cape Ann Chamber of Commerce, Cape Ann, MA, June 11, 1992.
Crisis in American K12 Education: What Can Be Done About It? Banquet Address, Tri-Services Conference on Corrosion, Plymouth, MA, May 13, 1992.
Crisis in American K-12 Education: What Can Be Done About It? MIT Club of Southeast Michigan, Ann Arbor, MI, May 12, 1992.
World Class Education, Business-Education Partnership, York College, York, PA, May 8, 1992.
Crisis in American K12 Education: What Can Be Done About It? MIT Club of Cape Cod, Hyannis, MA, May 7, 1992.
Crisis in American K12 Education: What Can Be Done About It? Raytheon Engineering Seminar, Lexington, MA, May 6, 1992.
Crisis in American K12 Education: What Can Be Done About It? Banquet Address, 1st Annual TPAM Workshop, Williamsburg, VA, April 22, 1992.
Crisis in American K-12 Education: What Can Be Done About It, MIT Club of Virginia, Charlottesville, VA, April 21, 1992.
Ronald M. Latanision, Ph.D.
Page 26 09/03 Corrosion Engineering of Advanced Materials and Advanced Engineering Systems, University of Virginia, Materials Science Seminar, April 21, 1992.
Crisis in American K12 Education: What Can Be Done About It, Rotary Club of Woburn, Woburn, MA, April 14, 1992.
MIT and The New England Science Teachers, National Science Teachers Association Annual Conference, Boston, MA, March 27, 1992.
Crisis in American K12 Education: What Can Be Done About It? Massachusetts Academy for Teachers, University of Massachusetts, Boston, MA, March 21,1992.
Crisis in American K12 Education: What Can Be Done About It? AMLT Seminar, Watertown, MA, March 16, 1992.
Crisis in American K12 Education: What Can Be Done About It? MIT Alumni Club of Minneapolis, MN, February 20, 1992.
Engineers and Public Service, Tau Beta Pi Initiation Banquet, Boston, MA, February 9, 1992.
U.S. Science and Engineering Education: New Rationales for New Initiatives, 7th Annual Conference of the National Association for Science Technology and Society, Alexandria, VA, February 8, 1992.
Education Equity Roundtable, American Association of University Women, 1st and 2nd Church, Boston, MA, January 31, 1992.
MITs Initiative in K12 Education, Center for Talented Youth, Cambridge, MA, October 19, 1991.
Corrosion of Advanced Metal Systems, ADVMAT, San Diego, CA, June 19, 1991.
The Corrosion Engineering of Advanced Materials, Europe-USA Symposium on New Frontiers in Science and Engineering in a European Perspective, Paris, France, May 28, 1991.
Reversing the Trend to Technical Illiteracy in the USA, MIT Alumni Club of the Capital District of New York, NY, May 16, 1991.
Improving Science LiteracyAn MIT Model, Massachusetts Association of Science Supervisors Annual Meeting, Worcester, MA, May 2, 1991.
Science Literacy: A Major Problemand Opportunity, MIT Alumni Club of Western Pennsylvania, April 24, 1991.
The MIT Science and Engineering Program for Science Teachers, Pittsburgh Conference, Chicago, IL, March 5, 1991.
Ronald M. Latanision, Ph.D.
Page 27 09/03 MIT Electronics Packaging Program, Intel, Santa Clara, CA, January 30, 1991.
Science Literacy: A Major Problemand Opportunity, MIT Alumni Club of Northern California, January 30, 1991.
Science Literacy: A Major Problemand Opportunity, MIT Alumni Club of San Diego, CA, January 29, 1991.
MIT Electronics Packaging Program, Rockwell Science Center, Thousand Oaks, CA, January 28, 1991.
Science Literacy: A Major Problemand Opportunity, MIT Alumni Club of Southern California, Los Angeles, CA, January 28, 1991.
The MIT Science and Engineering Program for High School Teachers, MIT Club of Washington, December 5, 1990.
Materials for Electronic Device Packaging, Materials Research Society Meeting, Boston, MA, November 27, 1990.
An Agenda for the Materials Processing Center in the 1990s, MPC 10th Anniversary Symposium, Cambridge, MA, November 18, 1990 Science Literacy: A Major Problemand Opportunity, North Shore Science Supervisors Association; Saugus, MA, November 1, 1990 The MIT Science and Engineering Program of High School Teachers, MIT Alumni Club of Puget Sound, Seattle, WA, October 16, 1990 Corrosion Failure of the Polyimide-Metal Interface, Electrochemical Society Fall Meeting, Seattle, WA, October 15, 1990 Corrosion of Electronic Materials and Devices, Boston Section of NACE; Newport, RI, October 4, 1990 Education in AmericaA Need for Stewardship, Keynote Address, MIT Alumni Leadership Conference, Cambridge, MA, September 15, 1990 Corrosion Engineering of New Materials and New Engineering Systems, Gordon Conference, New London, NH, July 24, 1990 A Processing Agenda for The 1990s, 11th Biennial Conference on National Materials Policy, Williamsburg, VA, June 12, 1990.
An Experiment in Freshman Chemistry at MIT, American Chemical Society, Boston, MA, April 27, 1990.
Ronald M. Latanision, Ph.D.
Page 28 09/03 Overview of Corrosion in Integrated Circuit Packages, Corrosion 90, Las Vegas, NV, April 25, 1990.
The Effect of Thickness on the Electrical Conductivity of Kapton Polyimide, 11th Intl.
Corrosion Congress, Florence, Italy, April 2, 1990 (with F. Bellucci).
Materials Processing Research at MIT, Joint Symposium of Welding Research Institute/Materials Processing Center, Osaka University, January 11, 1990.
Corrosion Engineering of Metal Matrix Composites, University of Naples, Naples, Italy, June 9, 1989.
Electrochemistry of Metastable Alloys, University of Naples, June 8, 1989.
Advanced Organic Coatings for Packaging of Electronic, Magnetic and Optical Devices, IBM, Essex Junction, VT, March 23, 1989.
Corrosion Engineering in the Packaging of Electronic Magnetic and Optical Devices, International Symposium on Corrosion Science and Engineering (in honor of Marcel Pourbaixs 85th Birthday), Brussels, Belgium, March 14, 1989.
The Corrosion Engineering of Metal-Matrix Composites, Lockheed Palo Alto Research Center Seminar, February 10, 1989.
The Use of Electrochemical Methods to Study Corrosion of Advanced Materials and Engineering Systems, Golden Gate Materials Technology Conference, Santa Clara, CA, February 9, 1989.
Corrosion Engineering of Metal-Matrix Composites, ONR Workshop on Environmental Effects in Metal, Ceramic and Organic Composites, NIST, Gaithersburg, MD, November 18, 1988.
Processing and Process Sensors, Diamond Jubilee of Metallurgy at NBS (NIST),
Gaithersburg, MD, November 10, 1988.
A Materials Centennial at MIT, MIT Club of New Haven, CT, November 9, 1988.
The Electrochemistry of Advanced Engineering Materials, Gordon Conference and Physical Electrochemistry, Colby-Sawyer College, New London, NH, August 11, 1988.
Materials Processing, Seminar for Astronaut Candidates, Johnson Space Flight Center, Houston, TX, April 5, 1988.
Electrochemical Properties of Metal-Matrix Composites, Materials Science Colloquium, Battelle Pacific Northwest Laboratories, Richland, WA, January 12, 1988.
Ronald M. Latanision, Ph.D.
Page 29 09/03 The Chemical Stability of Advanced Materials, The University of Poona, India, November 12, 1987.
Corrosion Education and Corrosion Research, Plenary Lecture, 10th International Congress on Metallic Corrosion, Madras, India, November 8, 1987.
Developments in Advanced Materials in the Industrialized Nations, University of Virginia Materials Science Colloquium, October 25, 1987.
The Corrosion Resistance of Metastable Alloys, Greater Boston Section of NACE, Chestnut Hill, MA, September 10, 1987.
Developments in Advanced Materials in the Industrialized Nations, 9th Biennial Conference on National Materials Policy, FMS, Fredericksburg, VA, August 4, 1987.
Recent Research in the Materials Processing Center at MIT, Japan R & D Center for Metals, Tokyo, Japan, April 24, 1987.
Recent Research Activities in the Materials Processing Center at MIT, Inauguration of the Furukawa Electric Companys Materials Research Center, Yokohama, Japan, April 23, 1987.
Current Research in The Uhlig Laboratory, Nippon Steel Company Research Center, Kawasaki, Japan, April 22, 1987.
Current Research in the Materials Processing Center at MIT, Hitachi Central Research Laboratory, Hitachi City, Japan, April 21, 1987.
Chemical Stability of Advanced Materials, Chemistry Department Colloquium, Texas A & M University, March 24, 1987.
Corrosion Research: Past, Present and Future, Shell Westhollow Laboratories, Houston, TX, March 23, 1987.
Current Projected Impact of Corrosion Technology, Thirty-Third Sagamore Army Materials Research Conference, Burlington, VT, July 28, 1986.
High Technology Materials, Special Libraries Association, Annual Meeting, Boston, June 10, 1986.
The Chemical Properties of Metastable Crystalline and Glassy Alloys, Spring Meeting of the Electrochemical Society, Boston, May 7, 1986.
The Need for Leadership in the Materials Industries, David Ford McFarland Award Lecture, The Pennsylvania State University, April 26, 1986.
Overview of the Materials Processing Center at MIT, Battelle Pacific Northwest Laboratories, Richland, WA, January 30, 1986.
Ronald M. Latanision, Ph.D.
Page 30 09/03 Chemistry of Fracture, 2nd Intl. Conf. on Fundamentals of Fracture, Gatlinburg, TN, November 6, 1985.
Hydrogen Transport in Metals, Materials Science Seminar, Brown University, October 24, 1985.
Prospects for the Establishment of a Massachusetts Advanced Materials Center, New England Chapter of American Ceramics Society, Boston, October 9, 1985.
Corrosion Resistance of Metastable Alloys Processed by Rapid Solidification, EPRI Workshop on Amorphous Metals and Semiconductors, San Diego, May 17, 1985.
Do We Need a National Materials Policy? Graduate Materials Committee, MIT, April 1, 1985.
Corrosion Resistance of Alloys Processed by Rapid Solidification Technology, NACE, 1985 Annual Meeting, Boston, March 27, 1985.
Materials Processing Research at M.I.T., Nippon Steel Corporation Fundamental Laboratories, Kawasaki, Japan, March 15, 1985.
Corrosion Resistance of Rapidly Quenched Alloys, USA-Japan Corrosion Seminar on Critical Issues in Reducing the Corrosion of Steel, Nikko, Japan, March 12, 1985.
Hydrogen Embrittlement of Iron and Nickel Alloys, Tokyo Institute of Technology, Japan, March 8, 1985.
The Need for a National Materials Policy, The Philosophical Society of Washington, 1880th Meeting, Washington, DC, February 22, 1985.
The Corrosion Resistance of Metastable Alloys, The Carl Gunnard Johnson Memorial Colloquium in Materials Science, Worcester Polytechnic Institute, November 13, 1984.
The Physical Metallurgy of Nickel-Base Alloys as It Relates to Corrosion, International Conference on Corrosion of Nickel-Base Alloys, Cincinnati, October 23, 1984.
The Atomistics of Fracture, Los Alamos National Laboratory, Center for Materials Science Colloquium, October 17, 1984.
Corrosion Resistance of Stainless Steels Processed by Rapid Solidification Technology, Intl.
Conf. on New Developments in Stainless Steel Technology, ASM Fall Meeting, Detroit, September 17, 1984.
Corrosion Resistance of Rapidly Solidified Alloys, Materials Processing Seminar, MIT, September 14, 1984.
Ronald M. Latanision, Ph.D.
Page 31 09/03 The Effect of Phosphorus on the Corrosion of Rapidly Quenched Alloys, Fifth International Conference on Rapidly Quenched Metals, Wurzburg, F.R.G., September 5, 1984 Krumb Lecture, Chicago Section TMS, June 19, 1984.
Hydrogen Transport During Plastic Deformation, 9th Intl. Cong. on Metallic Corrosion, Toronto, Canada, June 5, 1984 (with M. Hashimoto).
Krumb Lecture, Intermountain Section, SME, Climax, CO, May 17, 1984.
Does the U.S. Need a Materials Policy, Sandia Colloquium, Albuquerque, NM, May 16, 1984.
Krumb Lecture, Pinal Mountain Section, SME, Miami, AZ, May 15, 1984.
Environmentally-Induced Embrittlement, Am. Phys. Soc. Meeting, Detroit, MI, March 29, 1984.
Krumb Lecture, Trinity Section, SME, Dallas, TX, March 15, 1984.
Krumb Lecture, Detroit Section, TMS, March 5, 1984.
Hydrogen Transport Through Nickel During Deformation, TMS-AIME Meeting, Los Angeles, CA, March 1, 1984 (with G.S. Frankel).
Corrosion and Oxidation of Powder Metallurgical Alloys, TMS-AIME Annual Meeting, Los Angeles, CA, February 28, 1984 (with P. Searson).
Krumb Lecture, El Paso Section, SME, February 8, 1984.
Prospects for the Development of a National Materials Policy in the 98th Congress, Coeur dAlene Section, SME, Kellogg, ID (Krumb Lecture), January 18, 1984.
Hydrogen Transport Processes in Iron and Nickel, Battelle Pacific Northwest Lab., Richland, WA, January 17, 1984.
The Effect of Phosphorus on the Corrosion Resistance of Amorphous Copper-Zirconium Alloys, Materials Research Society Annual Meeting, Boston, MA, November 16, 1983 (by T.D. Burleigh).
Corrosion: The Environmental Degradation of Materials, Ottawa Valley Chapter of ASM, November 8, 1983.
Congressional Action to Develop a National Materials Policy, Metallurgical Engineering Colloquia, The Ohio State University, Columbus, OH, October 14, 1983.
Ronald M. Latanision, Ph.D.
Page 32 09/03 Effects of Grain Boundary Segregation and Precipitation on the Hydrogen Susceptibility of Nickel, TMS-AIME Fall Meeting, Philadelphia, PA, October 5, 1983 (with F.T.S. Lee).
Electrochemical Studies of Hydrogen Transport in Metal Electrodes, Conference on Crack Tip Structure and Processes, NBS, Gaithersburg, MD, June 7, 1983.
The Effect of Phosphorus on the Corrosion Resistance of Amorphous Copper-Zirconium Alloys, 5th Intl. Cong. on Passivity, France, (by T.D. Burleigh), June 1, 1983.
Scientists Role in the Evolution of Public Policy, Awards Banquet, National Capital Section of the Electrochemical Society, Washington, DC, May 5, 1983.
Prospects for the Development of a National Materials Policy in the 98th Congress, Center for Materials Science & Engineering Colloquium, MIT, April 7, 1983.
Prospects for the Development of a National Materials Policy in the 98th Congress, Martin Marietta Laboratories, Baltimore, MD, April 5, 1983.
Hydrogen Permeation and Embrittlement of Metals, U.S. Bureau of Mines, Avondale, MD, March 8, 1983.
Prospects for the Development of a National Materials Policy in the 98th Congress, Battelle Pacific Northwest Laboratories, Richland, WA, January 26, 1983.
Corrosion of Rapidly Solidified Glassy and Crystalline Alloys in Aqueous Media, MIT/ILP Symposium, December 2, 1982.
Corrosion of Aluminum in Seawater, MIT/Marine Industry Colloquium, December 1, 1982.
Corrosion Resistance of Rapidly Quenched Alloys, Materials Science Seminar, Johns Hopkins University, November 10, 1982.
Corrosion Resistance of Rapidly Quenched Alloys, AIME Fall Meeting, St. Louis, MO, October 28, 1982.
Grain Boundary Chemistry and Environmental Interactions in Ni-Base Alloys, AIME Fall Meeting, St. Louis, MO, October 26, 1982.
The Corrosion Resistance of Rapidly Quenched Alloys, Corrosion Center, University of Minnesota, September 17, 1982.
An Experimental Investigation of Anodic Oxide Film Growth on Amorphous Alloys, Electrochemical Society Meeting, Montreal (by N.R. Sorensen), May 11, 1982.
Failures from Corrosion, ASM Metals Engineering Institute Course on Principles of Failure Analysis, Boston, MA, March 11, 1982.
Ronald M. Latanision, Ph.D.
Page 33 09/03 Recent Advances in Understanding Embrittlement Phenomena, Boston Chapter ASM Students Night Symposium, January 14, 1982.
Problems in Corrosion of Metals, Physico-Mechanical Institute of the Ukranian Academy of Sciences, Lvov, November 12, 1981.
Atomistics of Environmentally-Induced Fracture, Institute of Physical Chemistry of the Academy of Sciences of the USSR, Moscow, November 10, 1981.
Corrosion Resistance of Microcrystalline Alloys, Fourth International Conference on Rapidly Quenched Metals, Sendai, Japan, August 25, 1981.
Corrosion Resistance of Rapidly Quenched Alloys, Beijing University of Iron and Steel Technology, Beijing, Peoples Republic of China, August 21, 1981.
Hydrogen Embrittlement, Beijing University of Iron and Steel Technology, Beijing, Peoples Republic of China, August 20, 1981.
Atomistics of Fracture, South China Institute of Technology, Canton, Peoples Republic of China, August 18, 1981.
Corrosion Resistance of Rapidly Quenched Alloys, Symposium of the Provincial Chemical Engineering Society, Canton, Peoples Republic of China, August 17, 1981.
Corrosion Resistance of Rapidly quenched Alloys, South China Institute of Technology, Canton, Peoples Republic of China, August 17, 1981.
Hydrogen Embrittlement, South China Institute of Technology, Canton, Peoples Republic of China, August 15, 1981.
Corrosion Engineering Short Course, Instituto Nacional de Technologia Industrial (INTI),
Buenos Aires, Argentina, June 1519, 1981.
General Overview: Atomistics of Environmentally-Induced Fracture, NATO Advanced Research Institute on Atomistics of Fracture, Calcatoggio, Corsica, May 23, 1981.
Corrosion Resistance of Rapidly Quenched Alloys, Joint Meeting of Boston Chapters of AIME and ECS, March 2, 1981.
Corrosion Engineering Short Course, Kuwait Institute for Scientific Research, January 1014, 1981.
Metallic Corrosion, in Whats New in Engineering, General Motors Institute, Flint, MI, September 19, 1980.
Ronald M. Latanision, Ph.D.
Page 34 09/03 The Role of Grain Boundary Chemistry and the Environment on Intergranular Fracture, Third International Conference on Effects of Hydrogen on Behavior of Materials, Jackson, WY, August 27, 1980.
Hydrogen Permeation and Embrittlement Studies on Metallic Glasses, Alexander R. Troiano Honorary Symposium, Case Western Reserve University, Cleveland, OH, June 3, 1980.
Corrosion Research on Metallic Glasses, Pacific Northwest Metals and Minerals Conference, Seattle, WA, May 9, 1980.
Surface Analysis of Electrochemically Pretreated Metals, University of Minnesota UNITE Seminar April 15, 1980.
Atomistics of Environmentally-Induced Fracture, NACE Corrosion/80 Research Conference, Chicago, IL March 3, 1980.
Corrosion Resistance of Metallic Glasses, Materials Research Society, Boston, MA, November 29, 1979.
Metallic Corrosion, in Whats New in Engineering, General Motors Institute, Flint, MI, November 2, 1979.
Hydrogen Entry and Permeation in Metallic Glasses, Electrochemical Society Meeting, Los Angeles, CA, October 15, 1979.
Hydrogen Entry and Permeation in Nickel-Base Alloys, Sandia Laboratories, Livermore, CA, October 12, 1979.
Lectures on Corrosion, UCLA Short Course on Corrosion Engineering, Los Angeles, CA, October 1011, 1979.
Chemical Stability of Metallic Glasses, Allied Chemical Corporate Development Center, Morristown, NJ, September 27, 1979.
New Techniques in Corrosion Prevention, Advanced Manufacturing Engineering Council Seminar, Raytheon Corporate Offices, Lexington, MA, September 26, 1979.
The Corrosion Resistance of Metallic Glasses, Third International Conference on Mechanical Behavior of Materials, Cambridge University, UK, August 22, 1979.
Grain Boundary Impurity-Environment Interactions, Battelle Workshop on the Role of Grain Boundary Chemistry and the Environment in Intergranular Fracture, Seattle, WA, August 6, 1979.
Corrosion Research at MIT, Martin Marietta Seminar, Baltimore, MD, July 12, 1979.
Ronald M. Latanision, Ph.D.
Page 35 09/03 Advances in Surface Analytical Methods, University of Connecticut Institute of Materials Science Symposium, Storrs, CT, May 4, 1979.
Environmental Fracture of Ni-Base Alloys, Symposium on SCC and Environmental Fracture of Structural Materials, Schenectady, NY, April 26, 1979.
Lectures on Corrosion, UCLA Short Course on Corrosion Engineering, University of Maryland, College Park, MD, March 2829, 1979.
Hydrogen Permeation and Embrittlement of Metallic Glasses, NACE Corrosion 79 Research Conference, Atlanta, GA, March 12, 1979.
An Introduction to the Surface Analytical Facility at MIT, Center for Materials Science and Engineering Colloquium, Massachusetts Institute of Technology, December 1, 1978.
Hydrogen Embrittlement/Stress Corrosion Cracking: A Comparison, Boston Chapter of NACE, November 8, 1978.
The Embrittlement of Aluminum Alloys by Cathodic Hydrogen, Fall Meeting of AIME, St. Louis, MO, October 18, 1978.
Hydrogen Permeation and Embrittlement Studies on Metallic Glasses, Fall Meeting of AIME, St. Louis, MO, October 18, 1978.
Contemporary Issues in Environmentally-Induced Fracture, Materials Science and Engineering Colloquium Series, Massachusetts Institute of Technology, Cambridge, MA, September 26, 1978.
Contemporary Corrosion Research, keynote address at the American Vacuum Society Symposium on Macroscopic and Microscopic Aspects of Corrosion, Mt. Hood, OR, August 19, 1978.
Stress Corrosion Cracking and Hydrogen Embrittlement: Differences and Similarities, Battelle Pacific Northwest Laboratories, Richland, WA, July 26, 1978 Corrosion Resistance of Metallic Glasses, Gordon Conference on Corrosion, Colby-Sawyer College, New London, NH, July 14, 1978.
Surface Effects in Crystal Plasticity, International Conference on Tribology, Massachusetts Institute of Technology, Cambridge, MA, June 21, 1978.
Environmental Degradation of Materials, IBM, Poughkeepsie Technical Center, May 9, 1978.
Environmental Degradation of Materials, Alpha Sigma Mu Lecture, Rennselaer Polytechnic Institute, Troy, NY, April 12, 1978.
Ronald M. Latanision, Ph.D.
Page 36 09/03 Corrosion Control, Union Carbide, Tarrytown Technical Center, April 4, 1978.
Differences Between Stress Corrosion Cracking and Hydrogen Embrittlement, Industrial Liaison Symposium on Corrosion, Massachusetts Institute of Technology, Cambridge, MA, January 19, 1978.
Environmental Degradation of Materials, Industrial Liaison Symposium on Corrosion, Massachusetts Institute of Technology, Cambridge, MA, January 19, 1978.
Stress Corrosion Cracking and Hydrogen Embrittlement: Differences and Similarities, Symposium on Environment Sensitive Fracture of Engineering Materials, Fall Meeting of AIME, Chicago, IL, October 24, 1977.
Modification of the Strength of Solids by Chemisorption, International Summer Institute on Surface Science, University of Wisconsin at Milwaukee, August 23, 1977.
Interface Dependent Mechanical Behavior, Gordon Conference on Chemistry at Interfaces, Kimball Union Academy, Meriden, NH, July 20, 1977.
Crack Tip Chemistry, Battelle Pacific Northwest Laboratories, Richland, WA, June 23, 1977.
Surface Effects in Crystal Plasticity, Battelle Pacific Northwest Laboratories, Richland, WA, June 20, 1977.
Corrosion and Passivation of Metals, T.R. Evan Research Center, Diamond Shamrock Corporation, Gainesville, OH, May 3, 1977.
Corrosion: Environmental Degradation of Materials, 9th Annual Frontiers in Chemistry Lecture Series, State University of New York at New Paltz, April 28, 1977.
Hydrogen Embrittlement of Nickel and Its Alloys, Stanford Research Institute, March 17, 1977.
Surface Effects in Crystal Plasticity, 106th AIME Annual Meeting, Atlanta, GA, March 8, 1977.
Environmental Degradation of Materials, Chemistry Department Colloquium, Northeastern University, Boston, MA, February 7, 1977.
Environmental Degradation of Materials, Materials Colloquium, Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, December 14, 1976.
Applications of Surface Chemistry to Industrial Problems, 3M Research Center, St. Paul, MN, October 29, 1976
Ronald M. Latanision, Ph.D.
Page 37 09/03 The Influence of Surface Charge Density on the Plasticity and Fracture of Zinc Monocrystal Electrodes, ICSMA4, Nancy, France, August 31, 1976.
Corrosion and Corrosion Control of Steels, Fourth Transmission Seminar, Meyer Industries, Minneapolis, MN, August 20, 1976.
Surface Analytical Approaches to Environmentally-Induced Embrittlement, Battelle Northwest Laboratories, August 13, 1976.
The Intergranular Embrittlement of Nickel by Hydrogen: Relation to the Cracking of PWR Steam Generator Tubes, Battelle Northwest Laboratories, Richland, WA, August 12, 1976.
The Principles and Applications of Surface Effects in Crystal Plasticity, Metallurgy Division Seminar Series, National Bureau of Standards, Gaithersburg, MD, May 24, 1976.
Hydrogen Embrittlement: A Surface Analytical Approach, Materials Science Seminar Series, Department of Materials Science and Engineering, Massachusetts Institute of Technology, April 6, 1976.
The Use of Electrochemical and Surface Analytical Techniques in the Study of Embrittlement Phenomena, Shell Westhollow Research Center, Houston, TX, March 26, 1976.
The Principles and Applications of Surface Effects in Crystal Plasticity, McMaster University Institute for Materials Research Seminar, Hamilton, Ontario, March 8, 1976.
The Effect of Electrolytically Enhanced Fracture or Slip on Grinding Ceramics, Ceramics Seminar Series, Department of Materials Science and Engineering, Massachusetts Institute of Technology, March 4, 1976.
Electrocapillary Effects in the Plasticity and Fracture of Zinc Monocrystals, 1976 Annual Meeting AIME, Las Vegas, NV, February 24, 1976.
The Use of Electrochemical and Surface Analytical Techniques in the Study of Embrittlement Phenomena, New England Combined Chapter, American Vacuum Society, Boston, MA, February 11, 1976.
Surface Effects in Crystal Plasticity, Maryland Institute of Metals, Baltimore, MD, December 9, 1975.
The Intergranular Embrittlement of Nickel by Hydrogen, Institute of Physical Chemistry, Academy of Sciences of the USSR, Moscow, November 14, 1975.
Surface Effects in Crystal Plasticity: General Overview, NATO Advanced Study Institute on Surface Effects in Crystal Plasticity, Hohegeiss, F.R.G., September 6, 1975.
Surface Effects in Crystal Plasticity, Institut fur Grenzflachenforschung und Vakuumphysik, Kernforschungsanlage, Julich, F.R.G., June 12, 1975
Ronald M. Latanision, Ph.D.
Page 38 09/03 The Intergranular Embrittlement of Nickel by Hydrogen: The Role of Impurities, Max-Planck-Institut fur Metallforschung, Stuttgart, F.R.G., June 6, 1975.
The Intergranular Embrittlement of Nickel by Hydrogen: The Role of Impurities, Studsvik -
AB Atomenergi Sweden, Nykoping, Sweden, May 22, 1975.
Surface Effects in Crystal Plasticity, Fritz-Haber-Institut der Max-Planck-Gesellschraft, Berlin, F.R.G., May 5, 1975.
Surface Effects in Crystal Plasticity, Ecole Nationale Superieure de Chemie, Paris, France, April 30, 1975.
The Use of Electrochemical and Surface Analytical Techniques in the Study of Embrittlement Phenomena, Central Electricity Generating Board, Research Laboratories, Leatherhead, England, March 7, 1975.
Surface Effects in Crystal Plasticity, Department of Metallurgy and Materials Science, Cambridge University, England, March 3, 1975.
Surface Effects in Crystal Plasticity, Philips Research Laboratories, Eindhoven, The Netherlands, February 20, 1975.
Surface Effects in Crystal Plasticity, Physikalisch Chemisches Institut der Universitat, Munchen, F.R.G., January 21, 1975.
The Embrittlement of Nickel by Cathodic Hydrogen, Joint meeting of the G.V. Akimov State Research Institute for the Protection of Materials and the Institute of Chemical Technology, Prague, Czechoslovakia, January 7, 1975.
The Use of Electrochemical and Surface Analytical Techniques in the Study of Embrittlement Phenomena, Joint meeting of the G.V. Akimov State Research Institute for the Protection of Materials and the Institute of Chemical Technology, Prague, Czechoslovakia, January 7, 1975.
The Use of Electrochemical and Surface Analytical Techniques in the Study of Embrittlement Phenomena, Polish Academy of Sciences, Warsaw, Poland, January 3, 1975.
Surface Effects in Crystal Plasticity II: Technological Applications, Max-Planck-Institut fur Eisenforschung, Dusseldorf, Germany, November 13, 1974.
Surface Effects in Crystal Plasticity I: Scientific Aspects, Max-Planck-Institut fur Eisenforschung, Dusseldorf, Germany, October 30, 1974.
Surface Phenomena in Metal Cutting and Ceramic Machiningand Earthquakes to Order, Carolinas Control Chapter, ASM, Raleigh, NC, May 9, 1974.
Ronald M. Latanision, Ph.D.
Page 39 09/03 Some Applications of Surface Science to Materials Technology, Esso Corporate Research Center, Linden, NJ, April 16, 1974.
Materials Science, Maryland Academy of Science Junior Science and Humanities Seminar, Baltimore, MD, March 22, 1974.
Electrochemical Techniques in the Study of Embrittlement Phenomena, National Association of Corrosion Engineers Annual Spring Meeting, Chicago, IL, March 7, 1974 Some Applications of Surface Science to Materials Technology, Department of Chemical Engineering and Materials Science, University of Minnesota, February 25, 1974.
Some Applications of Surface Science to Materials Technology, Department of Metallurgy and Materials Science, University of Pennsylvania, February 14, 1974.
Some Applications of Surface Science to Materials Technology, Department of Metallurgy and Materials Science, Massachusetts Institute of Technology, January 29, 1974.
Surface Effects in Crystal Plasticity, Mechanical and Aerospace Engineering Seminar Series, University of Delaware, November 16, 1973.
Intergranular Embrittlement of Ni by Cathodically Produced Hydrogen, Conference on Hydrogen in Metals, Seven Springs, PA, September 25, 1973.
Intergranular Cracking of Pure Nickel Electrodes at Cathodic Potentials, Third International Conference on the Strength of Metals and Alloys, Cambridge University, England, August 24, 1973.
Hydrogen Embrittlement of F.C.C. Metals and Alloys, Max-Planck-Institut fur Eisenforschung, Dusseldorf, Germany, August 15, 1973.
Surface Effects in Crystal Plasticity, Max-Planck-Institut fur Metallforschung, Institut fur Physik, Stuttgart, Germany, August 13, 1973.
Electromechanical Machining of Metals and Alloys, Engineering Conference, Society of Manufacturing Engineers, Detroit, MI, May 9, 1973.
The Chemical and Physical Nature of Surfaces, International Conference on Surface Technology, Carnegie-Mellon University, May 1, 1973.
Electromechanical Machining, Army Weapons Command, Research Seminar, Rock Island Arsenal, March 28, 1973.
Materials Science, Maryland Academy of Sciences Junior Science and Humanities Symposium, Baltimore, MD, March 23, 1973.
Ronald M. Latanision, Ph.D.
Page 40 09/03 Intergranular Cracking of Pure Nickel at Cathodic Potentials, N.A.C.E., Corrosion Research Conference, Anaheim, CA, March 21, 1973 The Mechanical Properties of Metal Electrodes, Washington Chapter of the Electrochemical Society, Washington, DC, March 1, 1973.
The Science and Technology of Environmental Effects on the Mechanical Behavior of Solids, State University of New York at Stony Brook, December 13, 1972.
Environment-Sensitive Mechanical Behavior of Metals and Alloys, Fundamental Research Laboratories, Nippon Steel Company, Kawasaki, Japan, June 2, 1972.
Surface Effects in Crystal Plasticity, Kyushu University, Fukuoka, Japan, May 31, 1972.
Environment-Sensitive Mechanical Behavior of Metals, Research Institute for Iron, Steel and Other Metals, Tohoku University, Sendai, Japan, May 30, 1972.
Stress Corrosion Cracking of Al-Zn-Mg Alloys: The Corrosion Behavior of Grain Boundary Constituents, 5th International Congress on Metallic Corrosion, Tokyo May 25, 1972 (with Sedriks, Green, and Novak).
Electrocapillarity and the Microhardness of Zinc Monocrystal Electrodes, 5th International Congress on Metallic Corrosion, Tokyo, May 23, 1972.
On the Mechanical Properties of Metal Electrodes, ASM Seminar, The Pennsylvania State University, April 18, 1972.
Electrocapillary Effects in the Mechanical Behavior of Metals, Spring Meeting of the American Chemical Society, Boston, MA, April 12, 1972.
Electrocapillarity and the Microhardness of Zinc Monocrystal Surfaces, Corrosion Research Conference, N.A.C.E., St. Louis, MO, March 21, 1972.
The Influence of Applied Potentials on the Microhardness of Zinc Monocrystal Electrodes:
The Electrocapillary Effect, International Symposium on the Science of Hardness Testing and Its Research Applications, National Metal Congress, Detroit, MI, October 20, 1971.
Electrocapillarity and Mechanical Behavior, Paul D. Merica Research Center, International Nickel Company, Suffern, NY, August 20, 1971.
The Characterization of Metal Surfaces, International Conference on Corrosion Fatigue, Storrs, CT, June 14, 1971.
On the Anisotropy Observed During the Passivation of Nickel Monocrystals, National Association of Corrosion Engineers, Corrosion Research Symposium, Chicago, IL, March 22, 1971.
Ronald M. Latanision, Ph.D.
Page 41 09/03 The Science of Materials, Maryland Academy of Sciences, Junior Science and Humanities Seminar, Baltimore, MD, March 19, 1971.
Surface Effects on the Plastic Deformation of Metal Monocrystals, Columbia University, November 25, 1970.
Surface Effects on the Plastic Deformation of Metals: The Electrocapillary Effect, Massachusetts Institute of Technology, November 12, 1970.
The Temperature Dependence of Stacking Fault Energy in Fe-Cr-Ni Alloys, AIME Fall Meeting, Cleveland, OH, October 19, 1970.
Surface-Sensitive Mechanical Behavior of Nickel Monocrystals, Second International Conference on Strength of Metals and Alloys, A.S.M., Asilomar, CA, September 1, 1970.
Surface-and Environment-Sensitive Mechanical Behavior of Metals, Alpha Sigma Mu Seminar, Rensselaer Polytechnic Institute, April 22, 1970.
Surface-and Environment-Sensitive Mechanical Behavior of Metals, Materials Engineering Seminar, University of Pittsburgh, January 20, 1970.
Studies of Extrinsic-Intrinsic Fault Pairs in Austenitic Stainless Steel, AIME Spring Meeting, Pittsburgh, PA, May 16, 1969.
Elements of Metallurgy, Metals Engineering Institute (ASM) Metallurgical Course, Washington Chapter of ASM, National Bureau of Standards FebruaryJune 1969.
Plastic Deformation of Electrochemically Polarized Nickel Single Crystals, Materials Science Seminar, Research Institute for Advanced Studies (RIAS), June 12, 1968.
Plastic Deformation of Electrochemically Polarized Nickel Single Crystals, at Institute for Materials Research Seminar, National Bureau of Standards, May 9, 1968.
Theoretical Work on Stress-Corrosion, at Joint Session of IMD (AIME), N.A.C.E. and Electrochemical Society, Carnegie-Mellon University April 25, 1968.
Stress-Corrosion Cracking of Fe-Cr-Ni Alloys, At International Meeting on Fundamental Aspects of Stress-Corrosion Cracking, The Ohio State University September 12, 1967.
On a Mechanism for Stress-Corrosion Cracking in Austenitic Stainless Steel, Lehigh University April 13, 1967.
Ronald M. Latanision, Ph.D.
Page 42 09/03 Professional Affiliations
- American Institute of Mining, Metallurgical and Petroleum Engineers Member, TMS-Committee on Chemistry and Physics of Metals (19721983)
Member, Executive Committee Boston Section of AIME (1976 1980)
Member, TMS Committee on Corrosion Resistant Metals (1976)
Member, Continuing Education Committee (19801986)
Member, TMS Acta Metallurgica Gold Medal and Hume-Rothery Award Subcommittee (1983)
Member, Long Range Planning Committee, (1987)
- American Society for Metals Member, Oxidation and Corrosion Activity (1976)
Member, Government and Public Affairs Committee (1984)
Awards Chairman, Boston Chapter of ASM (19841986) 1985 National Nominating Committee, ASM World Materials Congress 1988, Organizing Committee
- National Association of Corrosion Engineers Member, Governmental Affairs Committee, (1983-1986)
Member, Research Committee (1974-1983)
Co-Editor, Corrosion Research in Progress Column, CORROSION Journal (1973-1976)
Chairman, Awards Committee (1990-1991)
Director, Ex Officio (1990-1991)
Electric Power Research Institute Member, Corrosion Advisory Committee (19781981)
- American Society for Testing and Materials Member, Committee G-2 on Erosion and Wear (19721983)
Ronald M. Latanision, Ph.D.
Page 43 09/03
- The Electrochemical Society Active Member
- Institute of Electrical and Electronics Engineers Member, Committee on U.S. Competitiveness (1987)
- US/USSR Agreement for Cooperation in Science and Technology:
Corrosion Working Group Project Coordinator, Mechanical-Chemical and Localized Corrosion Processes (19781981).