L-2005-046, Refueling Outage Summary of Inservice Inspection Examinations
| ML050670057 | |
| Person / Time | |
|---|---|
| Site: | Turkey Point  |
| Issue date: | 02/15/2005 |
| From: | Florida Power & Light Co |
| To: | Office of Nuclear Reactor Regulation |
| References | |
| L-2005-046 | |
| Download: ML050670057 (89) | |
Text
TURKEY POINT UNIT 3 2004 REFUELING OUTAGE
SUMMARY
OF INSERVICE INSPECTION EXAMINATIONS I
DATE: 02/15/OS REVISION:
0 TURKEY POINT THIRD INTERVAL
[TP31 - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 1 REACTOR PRESSURE VESSEL 3-001
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME STATUS SEC.
XI CATEGY EMA ITEM NO METV M
[OD N
0 R
E C
I N G S E I 0 G M 0
T H
E R
REMARKS
- CALIBRATION BLOCK" DATA SHEET #
(REF. DWG. NO. 5613-M-4000) 000100 3-WR-18 B-A FLANGE TO UPPER SHELL B1.30 C UT 2L2.25CZR 7L2.25CIR 12L2.25CIR 2004-TP3-010 54-5054158-00 TOP FLANGE TOP FLANGE TOP FLANGE 10/19/2004 to 10/23/2004 -
X UT Complete.
No Recordable X
Indications.
Total of 71%
X
_ CRV was achieved when scanning from the top of the flange and from the vessel.
Limitations noted were the keyways and irradiation slots.
10/31/2004 - UT complete.
Geometric Indication from monitor taps at 47 deg. and 137 deg.
Also, signal received from radius at 31.2k depth with the 7 deg.
and 12 deg. transducers.
Manual scanned from top of flange.
- UT-314**
000200 3-WR-33 B-A C UT 54-5054158-00 X
10/19/2004 to 10/23/2004 -
UPPER SHELL TO B1.11 UT Complete.
No Recordable INTERMEDIATE SHELL Indications.
100% CRV Achieved. **UT-1**
000300 3-WR-10 B-A C UT 54-5054158-00 X
10/19/2004 to 10/23/2004 -
INTERMEDIATE SHELL TO 31.11 UT Complete.
No Recordable LOWER SHELL Indications.
100% CRV Achieved. **UT-1**
DATE: 02/1S/05 TURKEY POINT THIRD INTERVAL [TP3] - UNIT 3 PAGE: 2 REVISION:
0 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS REACTOR PRESSURE VESSEL 3-001 ASME
-~.STATUS N
I 0
SEC.
XI 0 N G T
SUMMARY
EXAMINATION AREA CATEGY EXAM R
S E
H REMARKS E
I 0
E NUMBER IDENTIFICATION ITEM NO METHOD DATA SHEET #
C G
M R
- CALIBRATION BLOCK*"
(REF.
DWG.
NO. 5613-M-4000) 000400 3-WR-31 B-A C UT 54-5054158-00 X
10/19/2004 to 10/23/2004 -
LOWER SHELL TO LOWER B1.11 UT Complete. No Recordable HEAD RING Indications.
90% CRV Achieved. **UT-1**
000500 3-WR-9 B-A C UT 54-5054158-00 X
10/19/2004 to 10/23/2004 -
LOWER HEAD RING TO B1.21 UT Complete.
No Recordable BOTTOM HEAD Indications.
83% CRV Achieved. Limited scan due to incores **UT.-1, UT-3**
000600 3-DI-A B-D C UT 54-5054158-00 X 10/19/2004 to 10/23/2004 -
INLET NOZZLE TO SHELL B3.90 UT Complete.
Acceptable 6 80 DEG.
Recordable Indications.
Fourteen subsurface indications were observed due to fabrication anomolies.
95% CRV Achieved. Limited due to nozzle boss. **UT-1, UT-1S, UT-32**
000700 3-DO-A B-D C UT 54-5054158-00 X
10/19/2004 to 10/23/2004 -
OUTLET NOZZLE TO SHELL B3.90 UT Complete. No Recordable
- 130 DEG.
Indications.
90% CRV Achieved. Limited due to nozzle boss. **UT-1, UT-15, UT-32**
DATE: 02/15/05 TURKEY POINT THIRD INTERVAL ETP3J - UNIT 3 PAGE: 3 REVISION:
0 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS REACTOR PRESSURE VESSEL 3-001 ASME STATUS N
I 0
SEC. XiI ON G
T
SUMMARY
EXAMINATION AREA CATEGY EXAM E
I 0
H REMARKS NUMBER IDENTIFICATION ITEM NO l METHOD DATA SHEET #
C G
M R
- "CALIBRATION BLOCK**
(REF.
DWG.
NO.
5613-M-4000) 000800 3-Dr-C B-D C UT 54-5054158-00 X 10/19/2004 to 10/23/2004 -
INLET NOZZLE TO SHELL B3.90 UT Complete.
Acceptable
@ 200 DEG.
Recordable Indications.
Six subsurface indications were observed due to fabrication anomalies.
95% CRV Achieved. Limited due to nozzle boss. **UT-1, UT-15, UT-32**
000900 3-DO-C B-D C UT 54-5054158-00 X 10/19/2004 to 10/23/2004 -
OUTLET NOZZLE TO SHELL B3.90 UT Complete.
Acceptable
- 250 DEG.
Recordable Indications.
Three subsurface indications were observed due to fabrication anomalies.
90%
CRV Achieved. Limited due to nozzle boss. **UT-1, UT-15, UT-32**
001000 3-DI-B B-D C UT 54-5054158-00 X
10/19/2004 to 10/23/2004 -
INLET NOZZLE TO SHELL B3.90 UT Complete.
Acceptable a 320 DEG.
Recordable Indications. One subsurface indications was observed due to fabrication anomoly.
95% CRV Achieved.
Limited due to nozzle boss.
- UT-1, UT-15, UT-32**
001100 3-DO-B B-D C UT 54-5054158-00 10/19/2004 to 10/23/2004 -
OUTLET NOZZLE TO SHELL B3.90 UT Complete.
No Recordable 0 10 DEG.
Indications.
90% CRV Achieved. Limitation due to nozzle boss.
- UT-1, UT-15, UT-32**
DATEt 02/15/05 TURKEY POINT THIRD INTERVAL [TP3] - UNIT 3 PAGE: 4 REVISION:
0 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS REACTOR PRESSURE VESSEL 3-001 ASME TATUS N
I 0
SEC. XII 0
N G T
SUMMARY
EXAMINATION AREA CATEGY EXAM R
S E
H REMARKS E
I 0E NUMBER IDENTIFICATION ITEM NO METHOD DATA SHEET #
C G M R
- CALIBRATION BLOCK**
(REF.
DWG.
NO.
5613-M-4000) 001150 3-DO-B-SUPPORT-5 P-A C VT-3 4.3-009 X
9/28/2004 -
VT-3 complete.
OUTLET NOZZLE TO SHELL 11.40 Light rust and light boric C 10 DEG.
acid observed on support.
No damage observed.
001200 3-DI-A-IRS B-D C ENEANCEDVT 2004-EOC20-01 X
10/23/2004 - Enhanced Visual INLET NOZZLE INNER B3.200 Complete.
No Recordable RADIUS Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
- UT-32**
001300 3-DO-A-IRS B-D C ENHANCEDVT 2004-EOC20-01 X
10/23/2004 - Enhanced Visual OUTLET NOZZLE INNER B3.100 Complete. No Recordable RADIUS Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00. **UT-32**
001400 3-DI-C-IRS B-D C ENHANCEDVT 2004-EOC20-01 X
10/23/2004 - Enhanced Visual INLET NOZZLE INNER B3.100 Complete.
No Recordable RADIUS Indications.
Framatome'a parent cocument for the Reactor Pressure Vessel 10-year examination is 54-5054158-00. **UT-32**
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP3] - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 5 REACTOR PRESSURE VESSEL 3-001
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION ASME SEC. XI CATEGY ITEM NO K
TATUS EXAM METHOD N I 0
O N G T R S E H E
I C E C G M R REMARKS
- CALIBRATION BLOCK" DATA SHEET #
.5-(REF. DWG. NO. 5613-M-4000) 001500 3-DO-C-IRS OUTLET NOZZLE INNER RADIUS B-D B3.100 C ENHANCEDVT 2004-EOC20-01 X
10/23/2004 -
Enhanced Visual Complete. No Recordable Indications.
Framatome'B parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00. **UT-32**
001600 3-DI-B-IRS B-D C ENHANCEDVT 2004-EOC20-01 X -
10/23/2004 - Enhanced Visual INLET NOZZLE INNER B3.100 Complete.
No Recordable RADIUS Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00. **UT-32**
001700 3-DO-B-IRS B-D C ENHANCEDVT 2004-EOC20-01 X -
10/23/2004 -
Enhanced Visual OUTLET NOZZLE INNER B3.100 Complete. No Recordable RADIUS Indications. Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00. **UT-32**
001950 CORE SUPPORT BARREL B-N-3 C VT-3 2004 EOC20-05 X
10/20/2004 - VT-3 Complete.
INLET PLOW IMPINGEMENT B13.70 No Recordable Indications.
AREAS Pramatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-S054158-00.
DATE: 02/15/05 REVISION:
0 TURREY POINT THIRD INTERVAL [TP33 - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 6 REACTOR PRESSURE VESSEL 3-001
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
_STATUS SEC. XI CATEGY FM ITEM NO METS NI 0
ON 0 T R S E H EI 0
E C
G M
R IM 10CD REMARKS
- "CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-M-4000) 002000 CORE SUPPORT BARREL OUTLET NOZZLES INTERIOR SURFACES B-N-3 C VT-3 B13.70 2004-EOC20-05 X -
10/21/2004 -
VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
002050 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-05 X -
10/20/2004 - VS-3 Complete.
OUTLET NOZZLES B13.70 No Recordable Indications.
EXTERIOR SURFACES Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
002100 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-05 X -
10/20/2004 - VT-3 Complete.
UPPER SECTION EXTERIOR B13.70 No Recordable Indications.
SURFACES Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
002150 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-05 X -
10/21/2004 - VT-3 Complete.
UPPER SECTION INTERIOR B13.70 No Recordable Indications.
SURFACES Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL ITP31 -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 7 REACTOR PRESSURE VESSEL 3-001
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
-STATUS SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
ON G T R
SE H
E I0 E
C GM R
REMARKS
- CALIBRATION BLOCK'*
DATA SHEET #
(REF.
DWG. NO. 5613-M-4000) 002200 CORE SUPPORT BARREL B-N-3 C VT-3 LOWER SECTION EXTERIOR B13.70 SURFACES 2004-EOC20-05 X
10/19/2004 - VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination in 54-5054158-00.
003100 REACTOR VESSEL B-N-1 C VT-3 2004-EOC20-01 X -
10/25/2004 - VT-3 Complete.
WELDS AND INTERIOR B13.10 No Recordable Indications.
SURFACES Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
____________REF_____N._-V______________________________________________________________________
(REP. DWG. NO. 3-V0l) 003900 CORE SUPPORT BARREL B-N-3 C VT-3 SUPPORT B13.70 COLUMNS(INSTRUMENTATIO N) 2004-EOC20-07 X -
10/19/2004 - VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
004300 REACTOR VESSEL TO HEAD B-N-1 C VT-3 2004-EOC20-02 X
10/25/2004 - VT-3 Complete.
UPPER SUPPORT PLATE B13.10 No Recordable Indications.
KEYWAYS Framatome'e parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/OS REVISION:
TURKEY POINT THIRD INTERVAL [TP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 8 REACTOR PRESSURE VESSEL 3-001
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME rSTATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
0 N T
S R S Ez E I O E
DATA SHEET #
C a M
R REMARKS
- CALIBRATION BLOCK" (REF. DWG. NO. 3-V01) 004700 CORE SUPPORT BARREL DIFFUSER PLATE (FLOW MIXER DEVICES)
B-N-3 C VT-3 B13.70 2004-EOC20-07 X
10/19/2004 - VT-3 Complete.
No Recordable Indications.
Pramatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
005500 CRUCIFORM INSTR.
GUIDE B-N-3 C VT-3 2004-EOC20-07 X
10/19/2004 - VT-3 Complete.
GUIDE TUBES AND B13.70 No Recordable Indications.
FASTENERS Framatome'B parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
006300 SECONDARY CORE SUPPORT B-N-3 C VT-3 2004-EOC20-07 X
10/19/2004 - VT-3 Complete.
ALIGNMENT XEYWAYS AND B13.70 No Recordable Indications.
FASTENERS Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
006800 SECONDARY CORE SUPPORT B-N-3 C VT-3 2004-EOC20-07 X
10/25/2004 - VT-3 Complete.
BASE PLATE AND B13.70 No Recordable Indications.
STRUCTURE Framatome's parent document for the Reactor Pressure Vessel 10-year examination is S4-50541SB-00.
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 9 REACTOR PRESSURE VESSEL 3-001
SUMMARY
NUMBER ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
0 N
G T
R S
E H
E I O E C
G M
R EXAMINATION AREA IDENTIFICATION REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 3-V01) 006810 SECONDARY CORE SUPPORT B-N-3 C VT-3 TIE PLATES B13.70 2004-EOC20-07 X
10/19/2004 - VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
007200 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-06 X
10/20/2004 -
VT-3 Complete.
BY-PASS FLOW NOZZLES B13.70 No Recordable Indications.
Pramatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
007600 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-06 X
10/20/2004 - VT-3 Complete.
VESSEL TO HEAD B13.70 No Recordable Indications.
ALIGNMENT PINS Pramatoms's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
009200 BAFFLE BOLTS AND B-N-3 C VT-3 2004-EOC20-05 X -
10/21/2004 - VT-3 Complete.
DEVICES IN TOP THREE B13.70 No Recordable Indications.
ROWS OF FORMERS Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 10 REACTOR PRESSURE VESSEL 3-001 ASME
_SSASUS SEC. xI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD N I 0
ON G T R
SE H
E I0 E
C G
M R
REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 3-V01) 009210 CORE SUPPORT BARREL BAFFLE PLATES B-N-3 C VT-3 B13.70 2004-EOC20-05 X -
10/21/2004 - VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination in 54-5054158-00.
009220 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-05 X -
10/21/2004 - VT-3 Complete.
TOP FORMER PLATE B13.70 No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-SOS4158-00.
009600 LOWER CORE PLATE B-N-3 C VT-3 2004-EOC20-07 X
10/19/2004 - VT-3 Complete.
PLATE, COLUMN B13.70 No Recordable Indications.
BOLTING,GUIDE TUBE Fra-atome's parent document BOLTING for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
009610 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-07 X
10/19/2004 - VT-3 Complete.
ACCESSIBLE UNDERSIDE B13.70 No Recordable indications.
OF LOWER CORE PLATE Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL ITP31
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 11 REACTOR PRESSURE VESSEL 3-001
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME SEC. XI CATEGY ITEM NO FSTATUS EXAM
.METHOD N I 0
ON TG R
SE H
E I0 E
C OM R
REMARKS
- CALIBRATION BLOCK" DATA SHEET #
(REF. DWG. NO. 3-V01) 010900 CORE SUPPORT BARREL SUPPORT FLANGE, SEATING SURFACES, PLUGS B-N-3 B13.70 C VT-3 2004-EOC20-06 X 10/20/2004 - VT-3 Complete.
Recordable Indication on Irradiation Plug at 40 degrees.
Irradiation plug was compressed/crushed and bent.
The outer edge was also deformed in the access hole.
Reference CR 2004-11474.
Engineering Disposition:
Use as-is.
The capsule is tight in place and performing its core bypass function and minimal contact damage with the corresponding surface of the reactor vessel.
A final evaluation was completed by Westinghouse.
The corresponding area on the upper internals was also examined with no recordable indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
010950 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-06 X -
10/20/2004 - VT-3 Complete.
HOLD DOWN SPRING B13.70 No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL ETP31
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 12 REACTOR PRESSURE VESSEL 3-001
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N
I O
N G R
S E
E I 0 DATA SHEET N C
G M 0
H REMARKS R
- CALIBRATION BLOCK**
(REF. DWG. NO. 3-V01) 011000 IRRADIATION SPECIMEN B-N-3 CAPSULES AND B13.70 ATTACHMENT WELDS C VT-3 2004-EOC20-04 X -
10/19/2004 AND 10/20/2004 VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
011800 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-04 X -
10/19/2004 - VT-3 Complete.
OUTLET NOZZLE TO B13.70 No Recordable Indications.
VESSEL SEATING SURFACE Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
012200 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-07 X -
10/19/2004 - VT-3 Complete.
RADIAL SUPPORT KEYS B13.70 No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
013000 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-04 X -
10/20/2004 - VT-3 Complete.
THERMAL SHIELD &
B13.70 No Recordable Indications.
ATTACHMENTS AT BOTTOM Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/05 TURKEY POINT THIRD INTERVAL [TP3] - UNIT 3 PAGE: 13 REVISION:
0 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS REACTOR PRESSURE VESSEL 3-001 ASME TATUS N
I 0
SEC. xiI ON G
T
SUMMARY
EXAMINATION AREA CATEGY I EXAM E
I a
H REMARKS NUMBER IDENTIFICATION ITEM NO METHOD DATA SHEET I C
G M
R
- CALIBRATION BLOCK**
(REF.
DWG.
NO.
3-V01) 013005 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-04 X -
10/20/2004 -
VT-3 Complete.
UPPER THERMAL SHIELD B13.70 No Recordable Indications.
BOLTING/PINS Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
013010 CORE SUPPORT BARREL B-N-3 C VT-3 2004-EOC20-04 X
10/20/2004 - VT-3 Complete.
LOWER THERMAL SHIELD B13.70 No Recordable Indications.
BOLTING/PINS Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
013020 REACTOR VESSEL B-N-2 C VT-3 2004-EOC20-02 X 10/23/2004 - VT-3 Complete.
RADIAL SUPPORT KEYWAYS B13.60 Recordable Indications identified on Radial Support Keyway at 270 degrees.
Several scratches and small gouges were observed on the I.D. edge of the mating surfaces.
Reference CR 2004-11911. Engineering Dispositions The tool marks do not affect internals of the reactor vessel radial support from performing its intended function, therefore this condition is not a non-conformance.
The condition is acceptable.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/05 TURXEY POINT THIRD INTERVAL ETP3] -
UNIT 3 PAGE: 14 REVISION:
0 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS REACTOR PRESSURE VESSEL 3-001 ASME TATUS N
I 0
SEC. XI O N G T
SUMMARY
EXAMINATION AREA CATEGY EXAM E
I 0
E REMARKS NUMBER IDENTIFICATION ITEM NO METHOD DATA SHEET #
C G
M R
- CALIBRATION BLOCK**
(REF.
DWG.
NO.
3-V01) 013050 VESSEL INSTRUMENTATION B-N-1 C VT-3 2004-EOC20-02 X
10/20/2004 - VT-3 Complete.
LOWER HEAD &
B13.10 No Recordable Indications.
INSTRUMENT GUIDE TUBES Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
013060 OUTLET NOZZLE TO B-N-1 C VT-3 2004-EOC20-01 X
10/23/2004 and 10/25/2004 -
INNER RADIUS SEALING B13.10 VT-3 Complete. No SURFACE Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
013065 VESSEL OUTLET NOZZLES B-N-l C VT-3 2004-EOC20-01 X
10/23/2004 and 10/25/2004 -
INTERIOR SURFACES B13.10 VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
013070 VESSEL INLET NOZZLES B-N-1 C VT-3 2004-EOC20-02 X
10/25/2004 - VT-3 Complete.
INTERIOR SURFACES B13.10 No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP33 - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 15 REACTOR PRESSURE VESSEL 3-001
SUMMARY
EXAMINATION AREA NNHBER IDENTIFICATION ASME SEC.
XI CATEGY ITEM NO rSTATUS EXAM METHOD N I 0
ON G
T RS E
H E
I0 E
C GM R
REMARKS
- CALIBRATION BLOCK*"
DATA SHEET #
(REF. DWG. NO. 3-V01) 013090 VESSEL TO CLOSURE HEAD B-N-1 C VT-3 MATING SURFACE ON B13.10 VESSEL 2004-EOC20-02 X -
10/23/2004 - VT-3 Complete.
No Recordable Indications.
Framatome's parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
013200 REACTOR VESSEL B-N-1 C VT-3 2004-EOC20-02 X -
10/23/2004 - VT-3 Complete.
CORE SUPPORT LEDGE B13.10 No Recordable Indications.
SURFACES Framatome'B parent document for the Reactor Pressure Vessel 10-year examination is 54-5054158-00.
(REF. DWG. NO. 5613-M-4001) 014600 3-LIG-1 THERU 18 THREADS IN FLANGE B-G-1 B6.40 C UT TP3-01-04 X
10/31/2004 -
UT Complete.
No Recordable Indications.
Limited examination close to vessel edge due to seal surface. Total coverage obtained for ligaments is 84.67%. Pramatome's parent cocument for the Reactor Pressure Vessel 10-year examination is 54-5054158-00. **UT-14**
014700 3-LIG-19 THRU 40 B-G-1 C UT TP3-01-04 X -
10/31/2004 -
UT Complete.
THREADS IN FLANGE B6.40 No Recordable Indications.
Limited examination close to vessel edge due to seal surface.
Total coverage obtained for ligaments is 84.67%.
Framatome's parent cocument for the Reactor Pressure Vessel 10-year examination is 54-5054158-00. **UT-14**
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL ITP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 16 REACTOR PRESSURE VESSEL 3-001 ASME
_STATUS SEC. XI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD NI 0
ON G T R
SE H
E I
E C
G MR REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-M-4001) 014800 3-LIG-41 THRU 58 THREADS IN FLANGE B-G-1 C UT B6.40 TP3-01-04 X -
10/31/2004 - UT Complete.
No Recordable Indications.
Limited examination close to vessel edge due to meal surface.
Total coverage obtained for ligaments is 84.67%.
Framatome's parent cocument for the Reactor Pressure Vessel 10-year examination in 54-5054158-00. **UT-14**
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL ETP3] - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS I C COMPONENTS PAGE: 17 PRESSURIZER 3-006
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
_SSASUS SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O NTG R
SE H
E I0 E
C G M R REMARKS
- CALIBRATION BLOCK"*
DATA SHEET #
(REF.
DWG. NO.
5613-M-4002) 042100 3-PCW-4 HEAD TO LOWER SHELL B-B C UT B2.11 OL2.25WRV 45S2.25AX 45S2.25CIR 60S2.25AX 60S2.25CIR NDE S.1 10/12/2004 -
UT complete.
X No Recordable Indications.
X Limited scans due to 11 x
X lines and welded pads.
X
- UT-a**
042200 3-PLW-3 B-B C UT 5.1-001 10/12/2004 -
UT complete.
LOWER SHELL LONG SEAM B2.12 0L2.25WRV X
No Recordable Indications.
45S2.25AX X
- UT-6**
45S2.25CIR X
60S2.25AX X
60S2.25CIR X
DATES 02/15/05 REVISION:
a TURKEY POINT THIRD INTERVAL CTP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 18 REACTOR COOLANT SYSTEM LOOP B 1 3-011 HOT LEG
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
_SATSV SEC.
XI CATEGY EXAM ITEM NO METHOD N I O N R S E I C G 0
GT E H 0
E MR REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-766-S SE. 2) 047100 29"-RCS-1305-1 RPV NOZZLE TO PIPE R-A R1.11 C UT 54-5054158-00 X -
10/19/2004 to 10/23/2004 -
UT Complete.
No Recordable indications.
100% CRV Achieved. **UT-12, UT-32, UT-46**
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 19 REACTOR COOLANT SYSTEM LOOP C COLD LEG In e-4-u A )
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
-STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N
0 o
ON G
T R
SE H
E I0 E
C GM R
REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF.
DWG.
NO.
5613-P-766-S SH. 3) 051000 27.5'-RCS-1309-14 ELBOW TO RPV NOZZLE R-A Rl.11 C UT 54-5054158-00 X
10/19/2004 to 10/23/2004 -
UT Complete.
No Recordable Indications.
100% CRV Achieved. **UT-26R, UT-32**
DATEt 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL
[TP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 20 REACTOR COOLANT SYSTEM PRESSURIZER RELIEF LINE 3-022 AME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O N G T R S E 8 E I 0 E DATA SHEET #
C 0 M R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-660-S SE. 1) 070700 3--RC-1304-1 REDUCER TO ELBOW R-A C UT Rl.ll 45S5.OCIR 605.OAX 7052.25AX 5.4-007 10/16/2004 - UT complete.
X No Recordable Indications.
X -
- UT-44**
X 071400 3"-RC-1305-1 R-A C UT 5.4-007 10/16/2004 - UT complete.
REDUCER TO VALVE 3-536 Rl.ll 45S5.OCIR X
Root geometry observed.
6055.0AX
- UT-44**
7052.25AX X -
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP3]
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 21 RESIDUAL HEAT REMOVAL TO RC LOOP B COLD LEG 3-038 ASME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD N I O N R S E I DATA SHEET #
C G
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-S86-S SH. 1) 128650 10'-SI-1302-IA ELBOW TO ELBOW R-A C UT Rl.ll 45S2.25AX 45S2.25CIR 60S2.25AX 5:4-008 10/15/2004 -
UT Complete.
No Recordable Indications.
- UT-27**
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP3l -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 22 RESIDUAL HEAT REMOVAL TO RC LOOP C COLD LEG 3-039 ASME SEC.
XI CATEGY ITEM NO rSTATUS EXAM METHOD NI 0
ON G
T R
S E
8 EI O E C
M R
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION REMARKS "CALIBRATION BLOCK**
DATA SHEET F (REF.
DWG.
NO. 5613-P-587-S S8. 2) 132500 SR-4 IA B-K C PT 3.3-003 X
10/12/2004 -
PT complete.
No Recordable Indications.
INTEGRAL ATTACHMENTS B10.20
DATE: 02/15/OS REVISION:
0 TURKEY POINT THIRD INTERVAL
[TP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 23 HIGH HEAD SAFETY INJECTION LOOP A INSIDE CTMT 3 -u'3 ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I O N R S E I C G 0
GT EH 0 E MR
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-764-S SH. 2) 151500 8080-H-010-12 SINGLE ACTING RESTRAINT F-A PF.10 C VT-3 4.3-007 X 10/8/2004 - VT-3 complete.
Field verified clearances differ from drawing. Actual field clearances in.60k instead of.75-.
Engineering Disposition:
use as-is. Reference CR 2004-10682.
151700 8080-H-010-13 F-A C VT-3 4.3-033 X -
10/8/2004 - VT-3 complete.
DOUBLE ACTING F1.10 No Recordable Indications.
RESTRAINT
DATE: 02/15/05 REVISION:
0 TURKEY POINT THIRD INTERVAL [TP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
. CLASS 1 C COMPONENTS PAGE: 24 CHEMICAL & VOLUME CONTROL TO RC LOOP C HOT LEG 3-045 ASME c^-r
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
O N a T
R S
E H
E I 0 E
DATA SHEET #
C G
M R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-661-S SH. 12 160300 PS-60 DOUBLE ACTING RESTRAINT F-A C VT-3 P1.10 4.3-03 9 X
10/13/2004 - VT-3 complete.
No Recordable Indications.
(REF. DWG. NO. 5613-P-661-S SH. 2) 165200 SR-39 DOUBLE ACTING RESTRAINT F-A C VT-3 F1.10 4.3-036 X
10/13/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
TURKEY POINT THIRD INTERVAL ETP3]
- UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 3, PERIOD 3, OUTAGE 3 (04)
CLASS 1 C COMPONENTS PAGE: 25 REACTOR COOLANT PUMP C 3-058
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
O N 0 T R
S E
H E I O E
DATA SHEET #
C 0
M R
REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-M-4008) 203100 3-RCP-C-A PUMP CASING WELD A B-L-1 C VT-1 812.10 4.1-012 X
10/9/2004 - VT-1 complete.
No Recordable Indications.
203200 3-RCP-C-B B-L-1 C VT-1 4.1-013 X -
10/9/2004 - VT-1 complete.
PUMP CASING WELD B B12.10 No Recordable Indications.
203300 3-RCP-C-C B-L-1 C VT-1 4.1-014 X
10/9/2004 -
VT-i complete.
PUMP CASING WELD C B12.10 No Recordable Indications.
DATE: 02/15/05 TURKEY POINT - UNIT 3 PAGE: 1 REVISION:
0 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS REACTOR PRESSURE VESSEL 3-001 ASME TUS N
I 0
SEC.
XI O N ET FR S E HREAS
SUMMARY
EXAMINATION AREA CATEGY EXAM E
I 0
E REMARKS NUMBER IDENTIFICATION ITEM NO METHOD DATA SHEET #
C G
M R
- CALIBRATION BLOCK**
(REF.
DWG.
NO.
5613-M-4000) 001800 3-WH-12 B-A R MT NDE 2.2
- UT-2**
FLANGE TO DOME WELD B1.40 UT NDE 5.1 003200 VESSEL TO CLOSURE READ B-N-1 R VT-3 NDE 4.3 SURFACE ON HEAD B13.10 003201 VESSEL TO CLOSURE HEAD B-N-1 B VT-3 4.3-048 X
10/27/2004 - VT-3 complete.
MATING SURFACE ON HEAD B13.10 No Recordable Indications.
Baseline examination.
038000 3-LIFTINGLUG-1 B-H B PT 54-ISI-240 X
8/10/2004 -
PT Complete.
No LIFTING LUG AT 60 54-PT-200 X
Recordable Indications.
DEGREES 10/1/2004 -
PT Complete.
Assembly marks were observed on the lifting lugs after the arrival on site.
The damage happened during shippment and after baseline examination was complete.
Reference CR 2004-2285.
038010 3-LIFTINGLUG-2 B-H B PT 54-ISI-240 X
8/10/2004 -
PT Complete.
No LIFTING LUG AT 180 54-PT-200 X
Recordable Indications.
DEGREES 10/1/2004 - PT Complete.
Assembly marks were observed on the lifting lugs after the arrival on site.
The damage happened during shippment and after baseline examination was complete.
Reference CR 2004-2285.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 2 REACTOR PRESSURE VESSEL 3-001 ASME T-SATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I O N R S E I C G 0
GT E
H 0 E MR
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-M-4000) 038020 3-LIFTINGLUG-3 LIFTING LUG AT 300 DEGREES B-H B PT 54-ISI-240 54-PT-200 X
8/10/2004 - PT Complete.
No X
Recordable Indications.
10/1/2004 - PT Complete.
Assembly marks were observed on the lifting lugs after the arrival on site.
The damage happened during shippment and after baseline examination was complete.
Reference CR 2004-2285.
038030 3-SUPPORTLUG-1 B-H B PT 54-ISI-240 8/11/2004 -
PT Complete. No SUPPORT LUG AT 0 Recordable Indications.
DEGREES 038040 3-SUPPORTLUG-2 B-H B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No SUPPORT LUG AT 120 Recordable Indications.
DEGREES 038050 3-SUPPORTLUG-3 B-H B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No SUPPORT LUG AT 240 Recordable Indications.
DEGREES 038100 3-CRDM-59 (PS)
B-O B PT 54-ISI-240 X
8/11/2004 - PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038110 3-CRDM-64 (P6)
B-O B PT 54-ISI-240 X -
8/11/2004 -
PT Complete. No CRDM Housing Weld B14.10 Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 3 REACTOR PRESSURE VESSEL 3-001 ASME
_STASUS SEC. XI CATEGY EXAM ITEM NO METEOD N I 0
O NG S
R S
E H
E I0 E
C GM R
SUMMARY
NUMEER EXAMINATION AREA IDENTIFICATION REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-M-4000) 038120 3-CRDM-32 (M6)
CRDM Housing Weld B-O B14.10 B PT 54-ISI-240 X
8/11/2004 - PT Complete.
No Recordable Indications.
038130 3-CRDM-27 (L5)
B-0 B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038140 3-CRDM-53 (L3)
B-0 B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038150 3-CRDM-65 (K2)
B-O B PT 54-ISI-240 X -
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038160 3-CRDM-60 (H2)
B-0 B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038170 3-CRDM-66 (F2)
B-0 B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038180 3-CRDM-34 (F4)
B-0 B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038190 3-CRDM-28 (ES)
B-0 B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
DATE: 02/15/05 REVISIONt 0
TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 4 REACTOR PRESSURE VESSEL 3-001 ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
0 N G T
R SE H
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION REMARKS
- CALIBRATION BLOCK**
DATA SHEET N (REF. DWG. NO. 5613-M-4000) 038200 3-CRDM-55 (CS)
CRDM Housing Weld B-O B14.10 B PT 54-ISI-240 X -
8/11/2004 - PT Complete.
No Recordable Indications.
038210 3-CRDM-67 (B6)
B-O B PT 54-ISI-240 X -
8/11/2004 - PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038220 3-CRDM-61 (B8)
B-0 B PT 54-ISI-240 X -
8/11/2004 - PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038230 3-CRDM-68 (B10)
B-0 B PT 54-ISI-240 X -
8/11/2004 - PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038240 3-CRDM-36 CD10)
B-0 B PT 54-ISI-240 X -
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038250 3-CRDM-29 (Ell)
B-O B PT 54-ISI-240 X -
8/11/2004 - PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038260 3-CRDM-57 (E13)
B-0 B PT 54-ISI-240 X -
8/11/2004 - PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038270 3-CRDM-69 (F14)
B-0 B PT 54-ISI-240 X -
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 5 REACTOR PRESSURE VESSEL 3-001 ASME
_STATUS SEC. XI CATEGY EXA ITEM NO METH N I 0
0 N
G T R
S E
H E I O E
DATA SHEET #
C 0
M R
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION M
HOD REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-M-4000) 038280 3-CRDM-58 (H14)
CRDM Housing Weld B-O B14.10 B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No Recordable Indications.
038290 3-CRDM-62 (K14)
B-O B PT 54-ISI-240 X -
8/11/2004 -
PT Complete. No CRDM Housing Weld B14.10 Recordable Indications.
038300 3-CRDM-30 CK12)
B-O B PT 54-lSI-240 X -
8/11/2004 -
PT Complete. No CRDM Housing Weld B14.10 Recordable Indications.
038310 3-CRDM-26 (Lll)
B-O B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038320 3-CRDM-51 (Nll)
B-O B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable indications.
038330 3-CRDM-63 (P10)
B-O B PT 54-ISI-240 X
8/11/2004 -
PT Complete.
No CRDM Housing Weld B14.10 Recordable Indications.
038400 3-WH-14-1 THRU 65 CRDM Housing Welds R PT NDE 3.3
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 6 STEAM GENERATOR B PRIMARY SIDE 3-004
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION ASME
-SSATUS SEC. XI CATEGY EXAM ITEM NO METEOD N
0 R
E DATA SHEET If C
I N
S I
a 0
GT E H O E MR REMARKS "CALIBRATION BLOCK" (REF. DWG. NO. 5613-M-4004) 040200 3-SGB-Z B-B READ TO TUBESHEET WELD B2.40 C UT 45S2.25AX 45S2.25CIR 60S2.25AX 60S2.25CIR OL2.25WRV 5.1-004 10/18/2004 -
UT complete.
X Numerous casting voids X recorded. Verified by x
X radiographs. **UT-"**
X 040300 3-SGB-I-IRS B-D C VT 4.8-003 X -
10/15/2004 -
Enhanced Visual INLET NOZZLE INNER B3.140 complete. No Recordable RADIUS SECTION Indications. **STEAM GENERATOR MOCK-UP**
040400 3-SGB-O-IRS B-D C VT 4.8-004 X -
10/15/2004 - Enhanced Visual OUTLET NOZZLE INNER B3.140 complete.
No Recordable RADIUS SECTION Indications. **STEAM GENERATOR MOCK-UP**
040500 3-SGB-I BOLTING B-G-2 C VT-l 4.1-016 X
10/12/2004 - VT-l complete.
STEAM GENERATOR INLET B7.30 No Recordable Indications.
MANWAY BOLTING 040600 3-SGB-O BOLTING B-G-2 C VT-i 4.1-015 X -
10/12/2004 - VT-1 complete.
STEAM GENERTOR OUTLET B7.30 No Recordable Indications.
MANWAY BOLTING
DATE: 02/15/05 TURKEY POINT - UNIT 3 PACE: 7 REVISION:
0 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS STEAM GENERATOR C PRIMARY SIDE 3-005 ASME
.TATUS N
I 0
SEC. xi O N T
SUMMARY
EXAMINATION AREA CATEGY EXAM R
S E
H REMARKS IE I 0 E
NUMBER IDENTIFICATION ITEM NO METHOD DATA SHEET #
C C M R
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-M-4005) 041100 3-SGC-I-IRS B-D C VT 4.8-002 X -
10/15/2004 - Enhanced Visual INLET NOZZLE INNER B3.140 complete.
No Recordable RADIUS SECTION Indications. **STEAM GENERATOR MOCK-UP**
041200 3-SGC-O-IRS B-D C VT 4.8-001 X 10/15/2004 - Enhanced Visual OUTLET NOZZLE INNER B3.140 UT 5.13-001 X
complete.
Two linear RADIUS SECTION indications were found in the first clad bead on nozzle side, 3:00 and 4:00 facing nozzle from the ID.
Both indications across clad weld bead, approx. 0.75" long, weld bead total width approx. 0.75".
Reference CR 2004-11026.
10/15/2004 - UT complete in the area of indications.
No evidence of the linear indication propagating into the base material. **STEAM GENERATOR MOCK-UP**
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 8 PRESSURIZER 3-006 ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
ON G T R
SE H
E I0 E
C G M R
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-M-4002) 043500 03-PZR-1 THRU 16 PRESSURIZER MANWAY BOLTING B-G-2 C VT-1 B7.20 4.1-008 4.1-009 X -
11/01/2004 -
VT-1 complete.
X No Recordable Indications.
Examined replacement studs 5
& 6. UTC #0000394210 and SC
- 0015171-1. Heavy Hex 1 7/8-8un 2A x 7 1/2" long with 4 1/4" threads. ASME SA193 Grade B7.
11/02/2004 - VT-l complete.
No Recordable Indications.
Examined studs 1 thru 4 and 7 thru 16.
The remaining two studs were replaced and examined on data sheet 4.1-009.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 9 REACTOR COOLANT SYSTEM LOOP B INTERMEDIATE LEG 3-010 ASME n--q
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO MESEOD N I 0
O N G T R
S E E E I O E
C G
M R
REMARXS
- CALIBRATION BLOCK**
DATA SHEET #
(REF.
DWG.
NO.
5613-P-766-S SE.
2) 046500 31"-RCS-1302-8 ELBOW TO PIPE R-A C UT 5.4-001 R1.11 45L1.00AX 6052.25AX 4552.25CIR UT 5.23-001 45L1.OOAX 45L1.00CIR 10/6/2004 - UT complete.
X Root geometry recorded.
X
- UT-12, UT-26R, UT-46**
X X
X
DATE: 02/15/05 REVISION:
0 TURXEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4. PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 10 REACTOR COOLANT SYSTEM PRESSURIZER SURGE LINE 3-016 ASME TATUS SEC. XI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMEER IDENTIFICATION ITEM NO METLOD (REF.
DWG.
NO. 5613-P-766-S SH. 2)
NI 0
ON a T R S E H EI 0
E CG M R REMARKS
- CALIBRATION BLOCK" DATA SHEET #
051400 12'-RC-1301-1 R-A BRANCH CONNECTION TO Rlll PIPE C UT 45S2.25AX 45S2.25CIR 5.4-002 10/7/2004 - UT complete.
No X
recordable Indications.
X Scan ie limited from the branch connection side.
- UT-34**
051800 VS-1G-12 F-A C VT-3 4.3-032 X
10/06/2004 - VT-3 complete.
DUAL SPRING HANGER F1.10 No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 11 REACTOR COOLANT SYSTEM PRESSURIZER SAFETY LOOP A 3-017 xa_
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION To SASUS SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
O N G T R S E H E I 0 E
DATA SHEET #
C G M R REMARKS
- CALI8RASION BLOCK**
(REF. DWG. NO. 5613-P-660-S SH. 3) 052700 41-RC-1301-1A NOZZLE TO SAFE-END R-A C RT Rl.11 9.3-001 X -
10/18/2004 -
RT complete.
No Recordable Indications.
053800 40-RC-1301-FB B-G-2 C VT-1 4.1-006 X -
10/04/2004 - VT-1 complete.
PIPING FLANGE BOLTING B7.50 No Recordable Indications
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 12 REACTOR COOLANT SYSTEM PRESSURIZER SAFETY LOOP B 3-018 IL 9vr
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION XATuV SEC.
XI CATEGY EXAM ITEM NO METHOD N
I 0
O N G T R
S E H E
I 0 E DATA SHEET #
C G M R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-660-S SH. 3) 054100 4'-RC-1302-1A NOZZLE TO SAFE-END R-A Rl.11 C RT 9.3-002 X -
10/18/2004 - RT complete.
No Recordable Indications.
- UT-53**
055200 4"-RC-1302-FB B-G-2 C VT-1 4.1-007 X -
10/04/2004 - VT-1 complete.
PIPING FLANGE BOLTING B7.50 No Recordable Indications
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 13 REACTOR COOLANT SYSTEM PRESSURIZER SAFETY LOOP C 3-019
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION 1-STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
O N
G T
R S E H E I 0 E C
G M
R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-660-S SE. 2) 055500 4'-RC-1303-1A NOZZLE TO SAFE-END R-A Rl.l1 C RT 9.3-003 X
10/18/2004 - RT complete.
No Recordable Indications.
- UT-53**
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 14 REACTOR COOLANT SYSTEM PRESSURIZER SPRAY TO PRZ.
3-020 ASME TATUS SEC. XSI_
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD N
I 0
O N G T R
S E H E
I 0 E DATA SHEET #
C G
M R
REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-661-S SH. 4) 062100 4"-RC-1304-1A SAFE-END TO NOZZLE R-A C RT Rl.ll 9.3-004 X
10/18/2004 - RT complete.
No Recordable Indications.
- UT-53**
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1. OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 15 REACTOR COOLANT SYSTEM PRESSURIZER RELIEF LINE 3-022 ASE cr
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
O N
T S
R S
E H E
I 0
E DATA SHEET F C
G M
R REMARKS
- CALIBRATION BLOCK**
(REF.
DWG.
NO. 5613-P-660-S SR. 1) 068700 4"-RC-1306-KA NOZZLE TO SAFE-END R-A R1.11 C RT 9.3-005 X
10/18/2004 - RT complete.
Acceptable porosity observed in weld.
- UT-53**
069500 3-RCH-27 F-A C VT-3 4.3-029 X
10/04/2004 - VT-3 complete.
SPRING HANGER F1.10 No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 16 REACTOR COOLANT SYSTEM AUXILIARY SPRAY LINE 3-035 A am
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
O N G S
R S
E H
E I O E
DATA SHEET #
C G
M R
REMARKS
- CALIBRATION BLOCK"*
(REF.
DWG.
NO.
5613-P-661-S SH.
2) 114400 2'-RC-1310-2 VALVE 3-313 TO PIPE R-A R1.12 C VT-2 4.2-001 X -
9/26/2004 - VT-2 complete.
No Recordable Indications.
- US-54**
120900 2'-RC-1310-38 R-A C VT-2 4.2-001 X
9/26/2004 -
VT-2 complete.
REDUCER TO PIPE R1.12 No Recordable Indications.
DATE: 02/15/05 REVISION:
TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 17 RESIDUAL BEAT REMOVAL TO RC LOOP B COLD LEG 3-038 AxMt
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD N I O N G R S E E
0 O
DATA SHEET #
C G M 0
T H
E R
REMARKS
- CALIBRATION BLOCK**
(REF.
DWG.
NO. 5613-P-586-S SH. 1) 128000 10--SI-1302-5 PIPE TO ELBOW R-A C UT R1.11 4552.25AX 45S2.25CIR 60S2.25AX NDE 5.4 10/15/2004 - UT complete.
X Root geometry recorded.
X Also non-metallic inclusion X
observed outside the examiantion volume.
Verified by 0 degree.
- UT-27**
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 18 RESIDUAL HEAT REMOVAL TO RC LOOP C COLD LEG 3-039 A5
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION STATUS SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O N GT R SE H
E I 0 E
DATA SHEET#
C G M R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-587-S SH. 2) 131700 VALVE 3-875F B-M-2 C VT-3 VALVE INTERNAL SURFACE B12. 50 4.3-046 X
10/11/2004 - VT-3 complete.
No Recordable Indications.
131800 VALVE 3-875F BOLTING B-G-2 C VT-1 4.1-017 X
10/11/2004 - VT-I complete.
VALVE BOLTING B7.70 Light Surface Corrosion.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 19 HIGH HEAD SAFETY INJECTION LOOP B INSIDE CTMT 3-041
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION ASME
,-STATUS SEC. XI CATEGY EXAM ITEM NO MET11D N
I 0
O N
G T
R S
E H
E I
0 E
DATA SHEET #
C G
M R
REMARKS
- CALIBRATION BLOCK-*
(REF.
DWG. NO.
5613-P-584-S
- 51. 1) 143100 HGR#4 SINGLE ACTING RESTRAINT F-A F1.10 C VT-3 4.3-026 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 20 HIGH HEAD SAFETY INJECTION LOOP C INSIDE CTMT J -UGZ
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION ASME STATUS SEC. XI CATEGY EXAM ITEM NO METHOD NI 0
ON G T R S E H EI 0
E C
G M R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-648-S SH. 1) 144800 SUPPORT F DOUBLE ACTING RESTRAINT F-A Fl.10 A VT-3 4.3-051 X
10/29/2004 - VT-3 complete.
No Recordable Indications.
This hanger was removed by maintanence during the Spring 2003 refueling outage and not reinstalled.
Reference CR 2004-10639.
Also the hanger design was modified.
Reference CRN-C-11369 and MRA CR-04-10639-01.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 21 HIGH READ SAFETY INJECTION LOOP B INSIDE CTMT 3-044 AM r
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO £ METHOD N
I 0
O N
G T
R S
E H
E I
0 E
DATA SHEET #
C a
M R
REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-764-S SH. 1) 157000 8080-H-009-07 SINGLE AND DOUBLE ACTING RESTRAINT F-A F1.10 C VT-3 4.3-014 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
158400 8080-H-009-05 F-A C VT-3 4.3-012 X
10/03/2004 - VT-3 complete.
DOUBLE ACTING F1.10 No Recordable Indications.
RESTRAINT
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4. PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 22 CHEMICAL & VOLUME CONTROL TO RC LOOP C HOT LEG 3-045 lc Qa
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD NI 0
ON G
T R
S E
H EI 0
E C
G M
R REMARKS "CALIBRATION BLOCK**
DATA SHEET #
(REP. DWG. NO. 5613-P-661-S SH. 1) 160800 3-VCH-114 SPRING HANGER F-A F1.10 E VT-3 4.3-008 4.3-052 X
10/14/2004 -
VT-3 complete.
X This hanger was examined as part of the expanded sample for 3-VCH-115.
Reference CR 2004-9153.
The spring setting is out of tolerance.
Reference CR 2004-11013.
Engineering Disposition:
Reset spring setting to the cold setting. Reference WO 34017723-02 11/05/2004 -
VT-3 complete.
No Recordable Indications.
Reexamination after Interim
- 1 corrective action and WO 34017723-02.
Spring hanger was reset.
161900 3-VCH-115 F-A C VT-3 4.3-001 X
9/30/2004 - VT-3 complete.
DOUBLE ACTING 11.10 4.3-049 X
Stanchion support is bent RESTRAINT approximately 30 down from intergrally attached weld.
Stanchion is toed at the guide plate, unable to slide, and the cleatrance os 0" where the sliding stanchion meets thr guide plate.
Engineering disposition:
The support is to be modified per MRA CR 04-9153-01 to SPEC-C-024 and WO 34017723.
Reference CR 2004-9153.
10/28/2004 - VT-3 complete.
No Recordable Indications.
Reexamination after modification.
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 23 CHEMICAL & VOLUME CONTROL TO RC LOOP C HOT LEG 3-045 A aim
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
O N G T R S E H E I 0 E DATA SHEET #
C G M R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-661-S SH. 1) 162000 3-VCH-115 IA INTEGRAL ATTACHMENT B-K B10.20 C PT 3.3-001 X
9/30/2004 -
PT complete.
No Recordable Indications 162200 SR-64 F-A C VT-3 4.3-010 X
9/30/2004 - VT-3 complete.
SPRING HANGER P1.10 No new Recorded Indications.
Reported previously identified conditions addressed by CRN on hanger drawing.
Incomplete thread engagement and gouge on base plate.
_____________REF.D____N.____----_______________S_______________________________2_______________
(REF. DWG. NO. 5613-P-661-S SB. 2) 163500 SR-37 WELDED STANCHION F-A E VT-3 F1.10 4.3-040 X
10/13/2004 - VT-3 complete.
No Recordable Indications.
Expanded sample per CR 2004-9153.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 24 CHEMICAL & VOLUME CONTROL TO RC LOOP A COLD LEG 3-046 ASME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METZOD NI 0
ON 0 T RS E H EI O
E C G M R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-661-S SH. 3) 167100 SR-63 DOUBLE ACTING RESTRAINT F-A F1.10 C VT-3 4.3-047 X -
10/21/2004 - VT-3 complete.
No Recordable Indications.
168700 3-VCH-120 F-A C VT-3 4.3-016 X -
10/03/2004 - VT-3 complete.
SINGLE ACTING F1.10 No Recordable Indications.
RESTRAINT 169400 PS-1 F-A C VT-3 4.3-017 X -
10/03/2004 - VT-3 complete.
DOUBLE ACTING P1.10 No Recordable Indications.
RESTRAINT
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 lNSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 25 CHEMICAL & VOLUME CONTROL FROM THE REGENERATIVE HX 3-049 A
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION
,....STATUS SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O N G T R
S E
H E I 0 E
DATA SHEET#
C G M R REMARKS
- -CALIBRATION BLOCX**
(REF.
DWG.
NO.
5613-P-644-S SH. 3) 177900 422-A DOUBLE ACTING RESTRAINT F-A F1.10 C VT-3 4.3-045 X
10/21/2004 -
VT-3 complete.
No Recordable Indications.
_______________F._DGNO.____----_______________S_______________________________2)_____________
(REP. DWG. NO. 5613-P-644-S SH. 2) 179600 423-C DOUBLE ACTING RESTRAINT F-A F1.10 C VT-3 4.3-043 X
10/14/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 C8EAR COMPONENTS PAGE: 26 CHEMICAL & VOLUME CONTROL SEAL INJECTION LOOP A 3-050 AMrwn SBMMARY NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
O N G T R S E H E I O E C G M R REMARKS
- CALIBRATION BLOCK*"
DATA SHEET #
(REF. DWG. NO. 5613-P-5070 SH. 1) 181140 1-CH-1351-l R-A RCP 3P-200A TO PIPE R1.12 C VT-2 4.2-002 X -
9/26/2004 - VT-2 complete.
No Recordable Indications.
181148 3/4"-CH-1357-2 R-A C VT-2 4.2-002 X
9/26/2004 - VT-2 complete.
1" x 3/4" REDUCER TO R1.12 No Recordable Indications.
PIPE 181190 1-CH-1348-3 R-A C VT-2 4.2-002 X -
9/26/2004 - VT-2 complete.
REDUCER TO FLANGE R1.12 No Recordable Indications.
181192 1"-CH-1354-1 R-A C VT-2 4.2-002 X
9/26/2004 - VT-2 complete.
FLANGE TO 1" x 3/4" R1.12 No Recordable Indications.
REDUCER
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 27 CHEMICAL & VOLUME CONTROL SEAL INJECTION LOOP C 3-051 ASME TATUS SEC. XI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD N I 0
O N a T
R S
E H
E I O E
DATA SHEET #
C G
M R
REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-5070 SH. 1) 182800 l'-CH-1353-1 RCP 3P-200C TO PIPE R-A C VT-2 Rl.12 4.2-003 X
9/26/2004 - VT-2 complete.
No Recordable Indications.
182809 3/40-CH-1359-6 R-A C VT-2 4.2-003 X
9/26/2004 - VT-2 complete.
ELBOW TO PIPE R1.12 No Recordable Indications.
182820 1'-CH-1350-3 R-A C VT-2 4.2-003 X
9/26/2004 - VT-2 complete.
REDUCER TO FLANGE R1.12 No Recordable Indications.
182825 3/4'-CH-1356-5 R-A C VT-2 4.2-003 X
9/26/2004 - VT-2 complete.
PIPE TO ELBOW R1.12 No Recordable Indications.
(REF.
DWG.
NO. 5613-P-5071 S8. 3) 182836 3/4'-CH-1341A-2 CONNECTION TO PIPE R-A C VT-2 Rl.12 4.003 X
9/26/2004 - VT-2 complete.
No Recordable Indications.
182838 3/4'-CH-1341B-1 R-A C VT-2 4.003 X
9/26/2004 - VT-2 complete.
FLANGE TO PIPE R1.12 No Recordable Indications.
182854 3/4'-CH-1344-5 R-A C VT-2 4.2-003 X
9/26/2004 - VT-2 complete.
VALVE 3-304L TO PIPE R1.12 No Recordable Indications.
_____________(RF._DGNO.____----______________________________________________________________
(REF. DWG. NO. 5613-P-646-S S8. 1)
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 28 CHEMICAL & VOLUME CONTROL SEAL INJECTION LOOP C 3-051 A
ev
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION W
SATUS SEC.
XI CATEGY EXAM ITEM NO METHOD NI 0
0N G
T R
S E
H EI 0 E C
GM R
REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF.
DWG.
NO. 5613-P-646-S SH.
1) 185300 H-4 DOUBLE ACTING RESTRAINT F-A F1.10 C VT-3 4.3-015 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
I DATE: 02/15/05 REVISION:
TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 29 CHEMICAL & VOLUME CONTROL SEAL INJECTION LOOP B 3-052 AS
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION STATU SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O N G S
R S E H E I 0 E
DATA SHEET #
C G
M R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-5070 SE. 1) 185798 1--CH-1352-1 RCP 3P-200B TO PIPE R-A R1.12 C VT-2 4.2-004 X
9/26/2004 - VT-2 complete.
No Recordable Indications.
185805 3/4*-CH-1358-4 R-A C VT-2 4.2-004 X
9/26/2004 - VT-2 complete.
ELBOW TO PIPE R1.12 No Recordable Indications.
185819 1-CH-1349-2 R-A C VT-2 4.2-004 X
9/26/2004 - VT-2 complete.
PIPE TO REDUCER R1.12 No Recordable Indications.
185824 3/41-CH-1355-3 R-A C VT-2 4.2-004 X
9/26/2004 - VT-2 complete.
PIPE TO ELBOW R1.12 No Recordable Indications.
(REF. DWO. NO. 5613-P-645-S SH. 2) 185900 l.SN-CH-1303-FBl B-G-2 C VT-1 PIPING FLANGE BOLTING B7.SO 4.1-004 X
10/03/2004 -
VT-1 complete.
No Recordable Indications 186400 H-4 F-A C VT-3 4.3-034 X
10/12/2004 -
VT-3 complete.
DOUBLE ACTING F1.10 No Recordable Indications.
RESTRAINT 187000 2"-CH-1305-FB2 B-G-2 C VT-1 4.1-003 X
10/03/2004 - VT-1 complete.
PIPING FLANGE BOLTING B7.50 No Recordable Indications
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 1 CBEAR COMPONENTS PAGE: 30 CHEMICAL & VOLUME CONTROL, REGENERATIVE HEAT EXCH 3-059
.ASME TATUS SEC. XI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD NI 0
ON G T R
S E
H EI O
E C
G M R REMARKS
- CALIBRATION BLOCK"*
DATA SHEET #
(REF. DWG. NO. 5613-M-4009) 204100 RGX 3E200 VISUAL FOR LEAKAGE C VT-2 VT-2 4.2-005 4.2-006 X
9/26/2004 - VT-2 Complete X
for Shutdown. No Recordable Indications.
11/27/2004 - VT-2 Complete for Startup.
No Recordable Indications.
DATE: 02/15/05 REVISION:
TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1.
OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 31 STEAM GENERATOR B SECONDARY SIDE 3-061 S
SUMMARY
EXAMINATION AREA C
NUMBER IDENTIFICATION I
_STATUS EC.
XI CATEGY EXAM TEM NO METHOD N I 0
O N G T R
S E H E I 0 E
C a M R REMARKS
- CALIBRATION BLOCK" DATA SHEET #
(REF. DWG. NO. 5613-M-4004) 210800 3-SGB-G LOWER INTERMEDIATE SHELL TO TRANSITION C-A C UT C1.10 45S2.25AX 45S2.25CIR 60S2.25AX 60S2.25CIR OL2.25WRV 5.1-003 x
S X
X X
10/15/2004 - UT complete.
No Recordable Indications.
- UT-7**
210900 3-SGB-CL C-A C UT 5.1-003 10/20/2004 - UT complete.
TRANSITION TO UPPER C1.10 45S2.25AX X Slag inclusions observed in SHELL WELD 452.2SCIR X
several locations throughout 60S2.25AX I
60S2.25CIR X
the weld. Verified by OL2.25WRV X -
radiographs. **UT-7**
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 32 STEAM GENERATOR C SECONDARY SIDE 3-062 S
SUMMARY
EXAMINATION AREA C
NUMBER IDENTIFICATION I
ASME SATUS SEC.
XI ATEGY EXA TEM NO METS N
I 0
O N
G T
R S
E H
E I
O E
DATA SHEET #
C G
M R
M HD REMARKS
- CALIBRATION BLOCK**
(REF.
DWG.
NO.
5613-M-4005) 212610 3-SGC-SS SECONDARY SIDE EXAMINATION C VT 4.4-001 X
10/07/2004 -
VT Complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 33 RESIDUAL HEAT REMOVAL TO RESID.HEAT REMOVAL PUMP A 3-063 A Quv
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC.
xI CATEGY EXAM ITEM NO METHOD N
0 R
E DATA SHEET #
C I
N S
I G
0 G T E H 0 E M
R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-669-S SH. 1) 212900 14--RER-2301-1 VALVE 3-751 TO ELBOW C-F-1 C PT C5.11 UT 45S2.25AX 4552.25CIR 60S2.25AX 70S2.25AX 3.3-006 5.4-004 X
10/12/2004 - PT complete.
No Recordable Indications.
X 10/13/2004 -
UT complete.
x x
No Recordable Indications.
X
- UT-33**
213100 141-RHR-2301-2 C-F-1 C PT 3.3-006 X
10/12/2004 - PT complete.
ELBOW TO PIPE C5.11 UT 5.4-003 No Recordable Indications 4655.OCIR X
10/12/2004 -
UT complete.
60S5.OAX X
No recordable Indications.
- UT-33**
213700 141-RHR-2301-4 C-F-1 C PT 3.3-004 X
10/09/2004 -
PT complete.
ELBOW TO ELBOW C5.11 UT 5.4-005 No Recordable Indications.
4555.OCIR X
10/9/2004 -
UT complete.
No 6055.OAX X
Recordable Indications.
- UT-33**
214200 14--RER-2301-5 C-F-1 C PT 3.3-004 X
10/09/2004 - PT complete.
ELBOW TO PIPE CS.11 UT 5.4-006 No Recordable Indications.
4555.OCIR X
10/09/2004 -
UT complete.
6055.OAX X
No Recordable Indications.
- UT-33**
214675 CONT.
PENETRATION P-1 F-A C VT-3 4.3-041 X
10/14/2004 - VT-3 complete.
ANCHOR F1.20 No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 34 RESIDUAL HEAT REMOVAL TO RESID.HEAT REMOVAL PUMP A 3-063 ASME
-TATUS SEC.
XI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD N I 0
O N G T R
S E
B E I 0 E
DATA SHEET t C
G M
R REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-669-S SH. 1) 214700 CONS.
PENETRATION P-1 C-C INTEGRAL ATTACHMENT C3.20 C PT 3.3-005 X
10/14/2004 - PT Complete.
No Recordable Indications (REF. DWG. NO. 5613-P-600-S SH. 1) 215700 SR-251 SPRING HANGER F-A F1.20 C VT-3 4.3-006 4.3-050 X
10//2004 - VT-3 complete.
X Spring can setting is out of tolerance.
Engineering Disposition:
Reset spring can to the corrective action of Interim Disposition 2.
Reset cold setting to S/8" (769 pounds)
Reference WO 33021794 and CR 2004-10252.
10/29/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4.
PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 35 RESIDUAL HEAT REMOVAL TO RESID.HEAT REMOVAL PUMP B 3-064
%E
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD N
I 0
O N
G T
R S
E H
E I
0 E C
G M
R REMARKS
- CALIBRATION BLOCK" DATA SHEET #
(REF.
DWG.
NO. 5613-P-600-S SH. 1) 219400 PS-54 F-A DUAL SPRING HANGERS F1.20 R VT-3 NDE 4.3
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 36 RESIDUAL HEAT REMOVAL FROM CONTAINMENT SUMP B 3-067 ARME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD NI 0
ON G
T R
S E
H EI 0 E Ca M
R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG.
NO. 5613-P-600-S SH. 2) 224200 SR-256 DOUBLE ACTING RESTRAINT F-A P1.20 C VT-3 4.3-030 X
10/04/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 37 RESIDUAL HEAT REMOVAL SYSTEM INSIDE CONTAINMENT 3-085 AMqwn
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC.
XI CATEGY EXA ITEM NO METE N I O N G R
S E
E I M
DATA SHEET #
C a M
0 T
H E
R AM
'OD REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-586-S SE.
1) 262000 SR-54 DOUBLE ACTING RESTRAINT P-A F1.20 C VT-3 4.3-042 X
10/04/2004 - VT-3 complete.
No Recordable Indications.
Actual clearance on top side of support is 1/32" instead of 1116".
Clearance is acceptable per STD-C-001 R.1
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 38 HIGH HEAD SAFETY INJECTION OUTSIDE CONTAINMENT 3-095 IL rW7
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION
_SATXUSb SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O N G T R
S E
H E I 0 E
C G
M R
REMARKS
- CALIBRATION BLOCK"*
DATA SHEET #
(REF. DWG. NO. 5613-P-823-S SH. 2) 288720 8080-R-006-01 DOUBLE ACTING RESTRAINT F-A F1.20 C VT-3 4.3 -005
-.-0 X 10/3/2004 - VT-3 complete.
Field verified clearances differ from drawing.
Actual field clearances are 0" on top and bottom of restraint.
Engineering Disposition:
Use as-is.
A CRN C-11333 (PC/M No.03-106 and ITOP
Reference CR 2004-10094.
288723 8080-R-006-01 IA C-C C PT 3.3-002 X -
10/03/2004 -
PT complete.
INTEGRAL ATTACHMENTS C3.20 No Recordable Indications 288787 8080-H-007-09 F-A C VT-3 4.3-028 X -
10/04/2004 -
VT-3 complete.
DOUBLE ACTING F1.20 No Recordable Indications.
RESTRAINT
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 39 HIGH PRESSURE SAFETY INJECTION OUTSIDE CONTAINMENT 3-096 ASM
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD NI 0
ON G T R
S E
H EI 0
E C G M R
REMARKS
- CALIBRATION BLOCK"*
DATA SHEET #
(REF. DWG. NO. 5613-P-597-S SH. 3) 289063 C
SINGLE ACTING RESTRAINT F-A F1.20 C VT-3 4.3-003 X 10/3/2004 - VT-3 complete.
Drawing descrepancy was noted.
Single nut on top of turnbuckle (2 nuts observed on drawing) and a nut is missing at the bottom of the turnbuckle (1 nut observed on drawing).
Engineering Disposition:
Use as-is.
A CRN-C-11336 (PC/M 030106) and MRA CR 04-10091 for SPEC C-024 will be issued.
Reference CR 2004-10091.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 40 STEAM GENERATOR A BLOWDOWN INSIDE CONTAINMENT J-.LJ
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME
_ASUS SEC. XI CATEGY EXAM ITEM NO METHOD N
I O N R S E I DATA SHEET #
C G 0
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-795-S SH. 2) 313500 61-BDA-2301-1 REDUCER TO VALVE SGB-3-001 C-F-2 C MT C5.51 UT 45S2.25AX 45S2.25CIR 2.2-002 5.2-001 X
10/15/2004 -
MT complete.
No Recordable Indications.
X -
10/16/2004 -
UT complete.
Root geometry recorded.
- UT-22**
313900 78101B-H-320-09 F-A C VT-3 4.3-037 X
10/13/2004 - VT-3 complete.
DOUBLE ACTING P1.20 No Recordable Indications.
RESTRAINT 313950 78101B-H-320-09 IA C-C C MT 2.2-002 X
10/15/2004 - MT complete.
INTEGRAL ATTACHMENTS C3.20 No Recordable Indications 314200 60-BDA-2301-5 C-F-2 C MT 2.2-002 X
10/15/2004 - MT complete.
REDUCER TO VALVE C5.51 UT 5.2-001 No Recordable Indications.
SGB-3-002 45S2.25AX X
10/16/2004 - UT complete.
4SS2.25CIR X
Root geometry recorded.
- UT-22**
314300 61-BDA-2301-6 C-F-2 C MT 2.2-002 X -
10/1S/2004 -
MT complete.
VALVE SGB-3-002 TO C5.51 UT 5.2-001 No Recordable Indications.
ELBOW 45S2.25AX X
10/16/2004 - UT complete.
4552.25C1R X
No Recordable Indications.
- UT-22**
314700 6--BDA-2301-8 C-F-2 C MT 2.2-002 X -
10/15/2004 - MT complete.
PIPE TO TEE C5.51 UT 5.2-001 No Recordable Indications.
45S2.25AX X -
10/16/2004 - UT complete.
45S2.2SCIR X -
70S2.25AX X
Root geometry recorded.
- UT-22**
____________________GNO.____----_______________S_______________._______________________)______
(REP. DWG. NO. S613-P-79S-S SH. 1)
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 41 STEAM GENERATOR A BLOWDOWN INSIDE CONTAINMENT 3-103 ASME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD NI 0
ON G T R S E H EI 0
E CG M
R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-795-S SH. 1) 316300 6'-BDA-2301-18 PIPE TO ELBOW C-F-2 C MT C5.51 UT 4552.25AX 4552.25CIR 7052.25AX 2.2-001 5.2-001 X
I x
10/14/2004 - MT complete.
X No Recordable Indications.
10/16/2004 - UT complete.
X
_ Root geometry recorded.
Informational radiograph was shot in the introdose of the elbow due to as welded condition not allowing a UT profile for 70 degree indication.
Root geometry seen only. **UT-22**
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS SUvMMARY INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 42 STEAM GENERATOR C BLOWDOWN INSIDE CONTAINMENT 3-105 A C^
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O N G T R S E H E I 0 E
DATA SHEET #
C G M R
REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-797-S SH. 1) 322800 78101B-H-322-02 DOUBLE ACTING RESTRAINT F-A F1.20 C VT-3 4.3-035 X
10/10/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 43 MAIN FEEDWATER SYSTEM LOOP A 3-109
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION ASME TATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
ON G
T R
SE H
E I O
E C
GM R
REMARKS
- "CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-651-S SH. 1) 330500 AUGMENTED EXAMINATION AUG FROM NOZZLE RAMP TO 1 DIAMETER ON ELBOW A UT 60S2.25AX 60S5.OAX 70S2.25AX 70S5.0AX 5.16-001 10/13/2004 -
UT complete.
X X Previously recorded root X
geometry and non-metallic K
X inclusions verified by 0 degree observed. **UT-20, UT-29**
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 44 MAIN FEEDWATER SYSTEM LOOP B 3-110
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
O N 0 T R SE H
E I0 E
C GM R
REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-652-S SH. 1) 333800 AUGMENTED EXAMINATION AUG FROM NOZZLE RAMP TO 1 DIAMETER ON ELBOW A UT 60S2.25AX 60S5.0AX 70S2.25AX 70S5.0AX 5.16-002 10/13/2004 -
UT complete.
X Previously recorded root K -
geometry and backing ring X
observed. **UT-20, UT-29**
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 2 CBEAR COMPONENTS PAGE: 45 MAIN FEEDWATER SYSTEM LOOP C 3-111 ASME
_STATUS SEC. XI CATEGY EXAM ITEM NO METHOD NI 0
ON G
S R
S E
H EI 0
E C
G M
R
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-178-S SE. 1) 338200 AUGMENTED EXAMINATION AUG FROM NOZZLE RAMP TO 1 DIAMETER ON ELBOW A UT 60S2.25AX 6055.OAX 70S2.25AX 7055.OAX 5.16-003 10/13/2004 -
UT complete.
X Previously recorded root X
geometry and backing ring x
observed. **UT-20, UT-29--
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 46 COMPONENT COOLING WATER SYSTEM INSIDE CONTAINMENT 3-118 1ASME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
O N G T R S E E E
I O E DATA SHEET #
C G
M R
REMARKS
- CALIBRATION BLOCK**
(REF.
DWG.
NO. 5613-P-628-S SE. 1) 344920 3-ACH-93 DOUBLE ACTING RESTRAINT F-A P1.30 C VT-3 4.3-027 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 47 COMPONENT COOLING WATER SYSTEM FROM CCW PUMP C 3-120 ASM
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION
_ATXUY SEC.
XI CATEGY EXAM ITEM NO METHOD NI 0
ON G T R
S E
H EI O
E C
G M
R REMAR2S
- CALIBRATION BLOCK**
DATA SHEET #
(REF.
DWG.
NO. 5613-P-596-S SH.
1) 345600 3-ARH-91 SINGLE ACTING RESTRAINT F-A F1.30 C VT-3 4.3-024 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 48 COMPONENT COOLING WATER PROM NORMAL CONT.
COOLER D 3-123 X
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
ON G
T R
S E
E I0 E
DATA SHEET#
C G
M R
REMARKS
- CALIBRATION BLOCK**
(REF.
DWG.
NO.
5613-P-630-S SH.
1) 348200 3-CCH-1 F-A R VT-3 DOUBLE ACTING F1.30 RESTRAINT NDE 4.3
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 49 COMPONENT COOLING WATER SYSTEM OUTSIDE CONTAINMENT 3-138 ASME
-STATUS SEC.
XI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD N
I 0
O N U T R S E H E I 0 E C G M R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-603-S SH. 1) 356500 SR-299 DOUBLE ACTING RESTRAINT F-A C VT-3 F1.30 4.3-025 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
356550 SR-299 IA D-A C VT-1 4.1-005 X -
10/03/2004 - VT-1 complete.
INTEGRAL ATTACHMENTS Dl.20 No Recordable Indications
DATEt 02/15/05 REVISIONs 0
TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGEs 50 COMPONENT COOLING WATER TO SPENT FUEL PIT HX 3 -. L U ASME
_STATUS SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
ON G
T R
SE H
E I0 E
C GM R
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION REMARKS
- CALIBRATION BLOCK"*
DATA SHEET #
(REF.
DWO.
NO. 5613-P-623-S SH.
1) 357750 SPENT FUEL PIT UT EXCH F-A HEAT EXCHANGER SUPPORT PF. 40 C VT-3 4.3-011 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
357760 SPENT FUEL PIT HT EXCH D-A C VT-1 4.1-002 X
10/03/2004 - VT-1 complete.
INTEGRAL ATTACHMENT D1.10 No Recordable Indications
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 51 COMPONENT COOLING WATER SYSTEM OUTSIDE CONTAINMENT 3-149 ASME
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N I 0
ON G
T R
SE H
E I0 E
C GM R
REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-614-S SH. 1) 361900 8074-H-327-01 DOUBLE ACTING RESTRAINT P-A F1.30 C VT-3 4.3-023 X -
10/03/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 52 COMPONENT COOLING WATER SYSTEM OUTSIDE CONTAINMENT 3-151
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION 1-HTATUS SEC. XI CATEGY EXAM ITEM NO METHOD N
I 0
O NG T
R SE H
E I0 E
DATA SHEETS#
C G
M R
REMARKS
- CALIBRATION BLOCK**
(REF.
DWG.
NO.
5613-P-614-S SH.
2) 363800 SR-172 DOUBLE ACTING RESTRAINT F-A F1.30 C VT-3 4.3-022 X
10/03/2004 - VT-3 complete.
No Recordable Indicationa.
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 53 COMPONENT COOLING WATER PROM RHR HEAT EXCHANGER A 3-153 ASME
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METBOD N
I 0
O NG T
R SE H
E 1 OE C
G M
R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-612-S SH. 2) 365900 3-ACH-2 SINGLE ACTING RESTRAINT F-A F1.30 C VT-3 4.3-038 X
10/04/2004 -
VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURK.EY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 54 COMPONENT COOLING WATER SYSTEM OUTSIDE CONTAINMENT 3-156 a?"
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION 1-
_TATUS SEC. XI CATEGY EXAM ITEM NO METBOD N
I 0
ON G
T RS E
E E
I0 E
C GM R
REMARKS
- CALIBRATION BLOCK" DATA SHEET #
(REF. DWG. NO. 5613-P-614-S SH. 3) 367200 SR-145 ANCHOR F-A C VT-3 F1.30 4.3-021 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4. PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 55 COMPONENT COOLING WATER SYSTEM TO CCW PUMPS A & B 3-157 ASME TATUS SEC. XI
SUMMARY
EXAMINATION AREA CATEGY EXAM NUMBER IDENTIFICATION ITEM NO METHOD N
I 0
O N G T R S E H E I 0 E C G M R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-614-S SH. 3) 367840 CCW PUMP 3P211A PUMP SUPPORT F-A F1.40 C VT-3 4.3-020 X
10/03/2004 -
VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 56 COMPONENT COOLING WATER SYSTEM OUTSIDE CONTAINMENT 3-158 ASM
SUMMARY
EXAMINATION AREA NUMBER IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
ON 0 T R
SE H
E I OE C GM R
REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-614-S SH. 2) 368400 SR-142 DOUBLE ACTING RESTRAINT F-A F1.30 C VT-3 4.3-004 X
10/3/2004 - VT-3 complete.
Field verified clearances differ from drawing.
Actual field clearances are 01 on west side of restraint and 3/16-on east side of restraint.
Engineering Disposition:
Use as-is.
Gap is acceptable per the SSD-C-011. Reference CR 2004-10092.
DATE: 02/15/05 REVISION:
0 TURXEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 57 COMPONENT COOLING WATER FROM NON-REGENERATIVE EX 3-161 1AM C
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC.
XI CATEGY EXAM ITEM NO METEOD N
I 0
O N G T R S E E E I 0 E DATA SHEET #
C G M R REMARKS
- CALIBRATION BLOCK*"
(REF. DWG. NO. 5613-P-622-S SE. 2) 370550 3-ACE-158 DOUBLE ACTING RESTRAINT F-A F1.30 C VT-3 4.3-013 X -
10/03/2004 - VT-3 complete.
No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 C8EAR COMPONENTS PAGE: 58 AUXILIARY FEEDWATER SYSTEM PUMP DISCHARGE 3-162 ASME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION W
SAT US SEC.
XI CATEGY EXAM ITEM NO METHOD NI 0
ON G
T R
S E
H EI 0 E C
G M R REMARKS
- CALIBRATION BLOCK**
DATA SHEET #
(REF.
DWG.
NO. 5610-P-884-S SH.
5) 371600 80117-H-322-07 DOUBLE ACTING RESTRAINT F-A F1.30 C VT-3 4.3-031 X
10/04/2004 - VT-3 complete.
No Recordable Indications.
371700 80117-H-322-07 IA D-A C VT-1 4.1-011 X
10/04/2004 - VT-1 complete.
INTEGRAL ATTACHMENT D1.20 No Recordable Indications.
DATE: 02/15/05 REVISION:
0 TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 59 INTAKE & CHLOR.WATER FROM INTAKE COOLING WTR.PUMPS 3-167 Arov
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION WALUb SEC.
XI CATEGY EXA ITEM NO METS N
I 0
O N
G T
R S
E H
E I O E
DATA SHEET #
C G
M R
M HOD REMARKS
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-606-S SH. 1) 377600 M-196-1 SINGLE ACTING RESTRAINT F-A F1.30 A VT-3 4.3-044 X
10/24/04 - VT-3 Complete.
No Recordable Indications.
Examination performed per MRA-31007526-05.
Modified support for easy access.
DATE: 02/15/05 REVISION:
0 TURKEY POINT -
UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 60 INTAKE COOLING WATER TO CCW HEAT EXCHANGERS 3-168 ASME
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION SEC. XI CATEGY EXAM ITEM NO METHOD N I ON R S E I DATA SHEET P C
G 0
- CALIBRATION BLOCK**
(REF. DWG. NO. 5613-P-633-S SH. 1) 378750 STRAINER B WELDED STANCHION F-A F1.40 C VT-3 4.3-002 X 10/03/2004 - VT-3 complete.
Reported an 8" crack in the concrete at the southwest corner of the support.
Engineering Disposition -
Use as is.
Reference CR 2004-10090.
378760 STRAINER B IA D-A C VT-1 4.1-001 X -
10/03/2004 - VT-1 complete.
INTEGRAL ATTACHMENTS Dl.10 No Recordable Indications
DATE: 02/15/05 REVISION:
TURKEY POINT - UNIT 3 INSERVICE INSPECTION RESULTS
SUMMARY
INTERVAL 4, PERIOD 1, OUTAGE 1 (04)
CLASS 3 CBEAR COMPONENTS PAGE: 61 INTAXE COOLING WATER TO CCW BEAT EXCHANGERS
.3
-16
SUMMARY
NUMBER EXAMINATION AREA IDENTIFICATION ASME
_STATUS SEC.
XI CATEGY EXAM ITEM NO METHOD N I 0
O N
G T
R S
E H
E I 0 E
C G M R
REMARXS
- CALIBRATION BLOCK**
DATA SHEET #
(REF. DWG. NO. 5613-P-820-S SH. 2) 378900 8045-H-172-01 SINGLE ACTING RESTRAINT F-A F1.30 C VT-3 4.3-018 X
10/03/2004 - VT-3 complete.
No Recordable Indications.
379280 8045-H-172-05 F-A C VT-3 4.3-019 X
10/03/2004 - VT-3 complete.
SINGLE ACTING Fl.30 No Recordable Indications.
RESTRAINT
I TURKEY POINT UNIT 3 2004 REFUELING OUTAGE NIS-BB Report
I IN
.;-;A'."iFORM NIS:BB OWNERSW AT&REPIORt iR EDbY+CUMENT"E)Am1NAtJON RESULTS A (iR:,qiredrb MER LE-Sj i 2
L-kf;~
ZA ON PLANT:
Turkey Point Unit 3 EXAMINATION DATE:
October 5,2004 to October 14, 2004 TOTAL TOTAL TOTAL TUBES TUBES TOTAL STEAM TUBES TUBES I
TUBES PhEVENTIVELY PLUGGED PLUGGED GENERATOR INSPECTED 20%-39%
2 40%, PIT & VOL PWGGED (PTP)
THIS TUBES OUTAGE IN S/G 3E210A (Bobbin) 3167
.0
.0 0
See RPC 3E210B (Bobbin) 3145 30 0
0 See RPC 3E210C (Bobbin) 3161 16(11 0
0 0
See RPC 3E210A (RPC) 3167p) 0 0
0 0
47 3E210B (RPC) 3145p) 0 0
0 0
69 3E210C (RPC) 31613) 0 0
0 0
53 LOCATION OF INDICATIONS (20% - 100% PIT & VOL. WARPLP. SVI)
Tube Tube Freespan Top of Top of Total Total STEAM AVB Supports Supports 6H thu 6C Tubesheet Tubesheet Indications Indications GENERATOR Bars 1 thru 6 1 Ihru 6 UBEND to #1 to #1 20%-39%
2a40%. PIT C/L:
FM Support C/L Suport L
&VOL 3E210A (Bobbin) 3m 0
0 0
0 0
30
° 3E210B (Bobbin) 6 m=
0 0
0 0
0 60 n 3E210C (Bobbin) 225t) 0 0
0 0
0 22Xt 0
3E210A(RPC) 0 0
0 0
0 0
0 0
3E210B (RPC) 0 0
0 0
0 0
0
£0 3E210C (RPC) 0 0
0 0
0 0
0 LOCATION OF INDICATIONS (1%-19%)
Tube Tube Freespan Top of Top of Total Total STEAM AVB Supports Supports 6H thru 60 Tubesheet Tubesheet Indications Indications GENERATOR Bars 1 thr 6 1 lthru6 UBEND to #1 to #1 1%-19%
1%-39%
CIL UL Support CAI Support HIL Left In Service 3E210A (Bobbin) 14nIl 0
0 0
0 0
See RPC See RPC 3E210B (Bobbin) 24 O
0 0
0 See RPC See RPC 3E210C (Bobbin) 6 7 )
0 0
0 0
0 See RPC See RPC 3E210A (RPC) 0 0
- tl 0
1m 102) 17mm 20Vnm 3E210B (RPC) 0 m
tm 0
0 0
26riym 32rlM2 3E210C (RPC) 0 0
.1a O
zM 1a, 0
69C1IX 9 1nx2_
Remarks:
- 1.
Mechanical wear damage at anti-vibration bars (AVB) was depth sized (zslng qualified bobbin coil sizing technique.
- 2.
Mechanical wear damage at ocations other than ant-vbatlon bars (AVB) was depth sized using qualnfed Plus Point-rotating coil sizing technique.
- 3.
Inrludes tubes In the dent, low row U-bend, hot leg and cold leg tubesheet expansIon transition programs.